* 'next/devel' of ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: (128 commits)
ARM: S5P64X0: External Interrupt Support
ARM: EXYNOS4: Enable MFC on Samsung NURI
ARM: EXYNOS4: Enable MFC on universal_c210
ARM: S5PV210: Enable MFC on Goni
ARM: S5P: Add support for MFC device
ARM: EXYNOS4: Add support FIMD on SMDKC210
ARM: EXYNOS4: Add platform device and helper functions for FIMD
ARM: EXYNOS4: Add resource definition for FIMD
ARM: EXYNOS4: Change devname for FIMD clkdev
ARM: SAMSUNG: Add IRQ_I2S0 definition
ARM: SAMSUNG: Add platform device for idma
ARM: EXYNOS4: Add more registers to be saved and restored for PM
ARM: EXYNOS4: Add more register addresses of CMU
ARM: EXYNOS4: Add platform device for dwmci driver
ARM: EXYNOS4: configure rtc-s3c on NURI
ARM: EXYNOS4: configure MAX8903 secondary charger on NURI
ARM: EXYNOS4: configure ADC on NURI
ARM: EXYNOS4: configure MAX17042 fuel gauge on NURI
ARM: EXYNOS4: configure regulators and PMIC(MAX8997) on NURI
ARM: EXYNOS4: Increase NR_IRQS for devices with more IRQs
...
Fix up tons of silly conflicts:
- arch/arm/mach-davinci/include/mach/psc.h
- arch/arm/mach-exynos4/Kconfig
- arch/arm/mach-exynos4/mach-smdkc210.c
- arch/arm/mach-exynos4/pm.c
- arch/arm/mach-imx/mm-imx1.c
- arch/arm/mach-imx/mm-imx21.c
- arch/arm/mach-imx/mm-imx25.c
- arch/arm/mach-imx/mm-imx27.c
- arch/arm/mach-imx/mm-imx31.c
- arch/arm/mach-imx/mm-imx35.c
- arch/arm/mach-mx5/mm.c
- arch/arm/mach-s5pv210/mach-goni.c
- arch/arm/mm/Kconfig
config ARCH_CNS3XXX
bool "Cavium Networks CNS3XXX family"
- select CPU_V6
+ select CPU_V6K
select GENERIC_CLOCKEVENTS
select ARM_GIC
select MIGHT_HAVE_PCI
select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
select CLKSRC_MMIO
+ select GENERIC_IRQ_CHIP
select HAVE_SCHED_CLOCK
help
Support for Freescale MXC/iMX-based family of processors
select GENERIC_GPIO
select HAVE_CLK
select HAVE_SCHED_CLOCK
- select ARCH_HAS_BARRIERS if CACHE_L2X0
select ARCH_HAS_CPUFREQ
help
This enables support for NVIDIA Tegra based systems (Tegra APX,
select TICK_ONESHOT
select PLAT_PXA
select SPARSE_IRQ
+ select AUTO_ZRELADDR
+ select MULTI_IRQ_HANDLER
help
Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
bool "Samsung S5PV210/S5PC110"
select CPU_V7
select ARCH_SPARSEMEM_ENABLE
+ select ARCH_HAS_HOLES_MEMORYMODEL
select GENERIC_GPIO
select HAVE_CLK
select CLKDEV_LOOKUP
bool "Samsung EXYNOS4"
select CPU_V7
select ARCH_SPARSEMEM_ENABLE
+ select ARCH_HAS_HOLES_MEMORYMODEL
select GENERIC_GPIO
select HAVE_CLK
select CLKDEV_LOOKUP
/* Address of GIC 0 CPU interface */
void __iomem *gic_cpu_base_addr __read_mostly;
-struct gic_chip_data {
- unsigned int irq_offset;
- void __iomem *dist_base;
- void __iomem *cpu_base;
-};
-
/*
* Supported arch specific GIC irq extension.
* Default make them NULL.
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_MXS=y
+CONFIG_MACH_MX23EVK=y
+CONFIG_MACH_MX28EVK=y
CONFIG_MACH_STMP378X_DEVB=y
CONFIG_MACH_TX28=y
# CONFIG_ARM_THUMB is not set
CONFIG_UX500_SOC_DB5500=y
CONFIG_UX500_SOC_DB8500=y
CONFIG_MACH_U8500=y
+CONFIG_MACH_SNOWBALL=y
CONFIG_MACH_U5500=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
-CONFIG_HOTPLUG_CPU=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
CONFIG_CMDLINE="root=/dev/ram0 console=ttyAMA2,115200n8"
CONFIG_VFP=y
CONFIG_NEON=y
CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_NETFILTER=y
CONFIG_PHONET=y
-CONFIG_PHONET_PIPECTRLR=y
# CONFIG_WIRELESS is not set
CONFIG_CAIF=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MISC_DEVICES=y
CONFIG_AB8500_PWM=y
CONFIG_SENSORS_BH1780=y
+CONFIG_NETDEVICES=y
+CONFIG_SMSC_PHY=y
+CONFIG_NET_ETHERNET=y
+CONFIG_SMSC911X=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_ATKBD is not set
CONFIG_INPUT_AB8500_PONKEY=y
# CONFIG_SERIO is not set
CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_NOMADIK=y
CONFIG_I2C=y
CONFIG_MFD_STMPE=y
CONFIG_MFD_TC3589X=y
CONFIG_AB8500_CORE=y
-CONFIG_REGULATOR=y
CONFIG_REGULATOR_AB8500=y
# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_MUSB_PIO_ONLY=y
+CONFIG_USB_GADGET=y
+CONFIG_AB8500_USB=y
CONFIG_MMC=y
+CONFIG_MMC_CLKGATE=y
CONFIG_MMC_ARMMMCI=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_LM3530=y
CONFIG_LEDS_LP5521=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AB8500=y
CONFIG_DMADEVICES=y
CONFIG_STE_DMA40=y
CONFIG_STAGING=y
-# CONFIG_STAGING_EXCLUDE_BUILD is not set
CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_CONFIGFS_FS=m
# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_DEBUG_PREEMPT is not set
CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_FTRACE is not set
CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
void gic_cascade_irq(unsigned int gic_nr, unsigned int irq);
void gic_raise_softirq(const struct cpumask *mask, unsigned int irq);
void gic_enable_ppi(unsigned int);
+
+struct gic_chip_data {
+ unsigned int irq_offset;
+ void __iomem *dist_base;
+ void __iomem *cpu_base;
+};
#endif
#endif
extern void migrate_irqs(void);
extern void asm_do_IRQ(unsigned int, struct pt_regs *);
+void handle_IRQ(unsigned int, struct pt_regs *);
void init_IRQ(void);
#endif
}
/*
- * do_IRQ handles all hardware IRQ's. Decoded IRQs should not
- * come via this function. Instead, they should provide their
- * own 'handler'
+ * handle_IRQ handles all hardware IRQ's. Decoded IRQs should
+ * not come via this function. Instead, they should provide their
+ * own 'handler'. Used by platform code implementing C-based 1st
+ * level decoding.
*/
-asmlinkage void __exception_irq_entry
-asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
+void handle_IRQ(unsigned int irq, struct pt_regs *regs)
{
struct pt_regs *old_regs = set_irq_regs(regs);
set_irq_regs(old_regs);
}
+/*
+ * asm_do_IRQ is the interface to be used from assembly code.
+ */
+asmlinkage void __exception_irq_entry
+asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
+{
+ handle_IRQ(irq, regs);
+}
+
void set_irq_flags(unsigned int irq, unsigned int iflags)
{
unsigned long clr = 0, set = IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN;
static void __init cns3420_init(void)
{
+ cns3xxx_l2x0_init();
+
platform_add_devices(cns3420_pdevs, ARRAY_SIZE(cns3420_pdevs));
cns3xxx_ahci_init();
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
#include <asm/hardware/gic.h>
+#include <asm/hardware/cache-l2x0.h>
#include <mach/cns3xxx.h>
#include "core.h"
struct sys_timer cns3xxx_timer = {
.init = cns3xxx_timer_init,
};
+
+#ifdef CONFIG_CACHE_L2X0
+
+void __init cns3xxx_l2x0_init(void)
+{
+ void __iomem *base = ioremap(CNS3XXX_L2C_BASE, SZ_4K);
+ u32 val;
+
+ if (WARN_ON(!base))
+ return;
+
+ /*
+ * Tag RAM Control register
+ *
+ * bit[10:8] - 1 cycle of write accesses latency
+ * bit[6:4] - 1 cycle of read accesses latency
+ * bit[3:0] - 1 cycle of setup latency
+ *
+ * 1 cycle of latency for setup, read and write accesses
+ */
+ val = readl(base + L2X0_TAG_LATENCY_CTRL);
+ val &= 0xfffff888;
+ writel(val, base + L2X0_TAG_LATENCY_CTRL);
+
+ /*
+ * Data RAM Control register
+ *
+ * bit[10:8] - 1 cycles of write accesses latency
+ * bit[6:4] - 1 cycles of read accesses latency
+ * bit[3:0] - 1 cycle of setup latency
+ *
+ * 1 cycle of latency for setup, read and write accesses
+ */
+ val = readl(base + L2X0_DATA_LATENCY_CTRL);
+ val &= 0xfffff888;
+ writel(val, base + L2X0_DATA_LATENCY_CTRL);
+
+ /* 32 KiB, 8-way, parity disable */
+ l2x0_init(base, 0x00540000, 0xfe000fff);
+}
+
+#endif /* CONFIG_CACHE_L2X0 */
extern struct sys_timer cns3xxx_timer;
+#ifdef CONFIG_CACHE_L2X0
+void __init cns3xxx_l2x0_init(void);
+#else
+static inline void cns3xxx_l2x0_init(void) {}
+#endif /* CONFIG_CACHE_L2X0 */
+
void __init cns3xxx_map_io(void);
void __init cns3xxx_init_irq(void);
void cns3xxx_power_off(void);
static __init int da850_evm_init_cpufreq(void) { return 0; }
#endif
+#define DA850EVM_SATA_REFCLKPN_RATE (100 * 1000 * 1000)
+
static __init void da850_evm_init(void)
{
int ret;
if (ret)
pr_warning("da850_evm_init: spi 1 registration failed: %d\n",
ret);
+
+ ret = da850_register_sata(DA850EVM_SATA_REFCLKPN_RATE);
+ if (ret)
+ pr_warning("da850_evm_init: sata registration failed: %d\n",
+ ret);
}
#ifdef CONFIG_SERIAL_8250_CONSOLE
__clk_enable(clk->parent);
if (clk->usecount++ == 0 && (clk->flags & CLK_PSC))
davinci_psc_config(psc_domain(clk), clk->gpsc, clk->lpsc,
- PSC_STATE_ENABLE);
+ true, clk->flags);
}
static void __clk_disable(struct clk *clk)
if (--clk->usecount == 0 && !(clk->flags & CLK_PLL) &&
(clk->flags & CLK_PSC))
davinci_psc_config(psc_domain(clk), clk->gpsc, clk->lpsc,
- (clk->flags & PSC_SWRSTDISABLE) ?
- PSC_STATE_SWRSTDISABLE : PSC_STATE_DISABLE);
+ false, clk->flags);
if (clk->parent)
__clk_disable(clk->parent);
}
pr_debug("Clocks: disable unused %s\n", ck->name);
davinci_psc_config(psc_domain(ck), ck->gpsc, ck->lpsc,
- (ck->flags & PSC_SWRSTDISABLE) ?
- PSC_STATE_SWRSTDISABLE : PSC_STATE_DISABLE);
+ false, ck->flags);
}
spin_unlock_irq(&clockfw_lock);
#define CLK_PLL BIT(4) /* PLL-derived clock */
#define PRE_PLL BIT(5) /* source is before PLL mult/div */
#define PSC_SWRSTDISABLE BIT(6) /* Disable state is SwRstDisable */
+#define PSC_FORCE BIT(7) /* Force module state transtition */
#define CLK(dev, con, ck) \
{ \
static struct clk ref_clk = {
.name = "ref_clk",
.rate = DA850_REF_FREQ,
+ .set_rate = davinci_simple_set_rate,
};
static struct clk pll0_clk = {
.flags = DA850_CLK_ASYNC3,
};
+static struct clk sata_clk = {
+ .name = "sata",
+ .parent = &pll0_sysclk2,
+ .lpsc = DA850_LPSC1_SATA,
+ .gpsc = 1,
+ .flags = PSC_FORCE,
+};
+
static struct clk_lookup da850_clks[] = {
CLK(NULL, "ref", &ref_clk),
CLK(NULL, "pll0", &pll0_clk),
CLK(NULL, "usb20", &usb20_clk),
CLK("spi_davinci.0", NULL, &spi0_clk),
CLK("spi_davinci.1", NULL, &spi1_clk),
+ CLK("ahci", NULL, &sata_clk),
CLK(NULL, NULL, NULL),
};
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/serial_8250.h>
+#include <linux/ahci_platform.h>
+#include <linux/clk.h>
#include <mach/cputype.h>
#include <mach/common.h>
#define DA8XX_SPI0_BASE 0x01c41000
#define DA830_SPI1_BASE 0x01e12000
#define DA8XX_LCD_CNTRL_BASE 0x01e13000
+#define DA850_SATA_BASE 0x01e18000
#define DA850_MMCSD1_BASE 0x01e1b000
#define DA8XX_EMAC_CPPI_PORT_BASE 0x01e20000
#define DA8XX_EMAC_CPGMACSS_BASE 0x01e22000
return platform_device_register(&da8xx_spi_device[instance]);
}
+
+#ifdef CONFIG_ARCH_DAVINCI_DA850
+
+static struct resource da850_sata_resources[] = {
+ {
+ .start = DA850_SATA_BASE,
+ .end = DA850_SATA_BASE + 0x1fff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_DA850_SATAINT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+/* SATA PHY Control Register offset from AHCI base */
+#define SATA_P0PHYCR_REG 0x178
+
+#define SATA_PHY_MPY(x) ((x) << 0)
+#define SATA_PHY_LOS(x) ((x) << 6)
+#define SATA_PHY_RXCDR(x) ((x) << 10)
+#define SATA_PHY_RXEQ(x) ((x) << 13)
+#define SATA_PHY_TXSWING(x) ((x) << 19)
+#define SATA_PHY_ENPLL(x) ((x) << 31)
+
+static struct clk *da850_sata_clk;
+static unsigned long da850_sata_refclkpn;
+
+/* Supported DA850 SATA crystal frequencies */
+#define KHZ_TO_HZ(freq) ((freq) * 1000)
+static unsigned long da850_sata_xtal[] = {
+ KHZ_TO_HZ(300000),
+ KHZ_TO_HZ(250000),
+ 0, /* Reserved */
+ KHZ_TO_HZ(187500),
+ KHZ_TO_HZ(150000),
+ KHZ_TO_HZ(125000),
+ KHZ_TO_HZ(120000),
+ KHZ_TO_HZ(100000),
+ KHZ_TO_HZ(75000),
+ KHZ_TO_HZ(60000),
+};
+
+static int da850_sata_init(struct device *dev, void __iomem *addr)
+{
+ int i, ret;
+ unsigned int val;
+
+ da850_sata_clk = clk_get(dev, NULL);
+ if (IS_ERR(da850_sata_clk))
+ return PTR_ERR(da850_sata_clk);
+
+ ret = clk_enable(da850_sata_clk);
+ if (ret)
+ goto err0;
+
+ /* Enable SATA clock receiver */
+ val = __raw_readl(DA8XX_SYSCFG1_VIRT(DA8XX_PWRDN_REG));
+ val &= ~BIT(0);
+ __raw_writel(val, DA8XX_SYSCFG1_VIRT(DA8XX_PWRDN_REG));
+
+ /* Get the multiplier needed for 1.5GHz PLL output */
+ for (i = 0; i < ARRAY_SIZE(da850_sata_xtal); i++)
+ if (da850_sata_xtal[i] == da850_sata_refclkpn)
+ break;
+
+ if (i == ARRAY_SIZE(da850_sata_xtal)) {
+ ret = -EINVAL;
+ goto err1;
+ }
+
+ val = SATA_PHY_MPY(i + 1) |
+ SATA_PHY_LOS(1) |
+ SATA_PHY_RXCDR(4) |
+ SATA_PHY_RXEQ(1) |
+ SATA_PHY_TXSWING(3) |
+ SATA_PHY_ENPLL(1);
+
+ __raw_writel(val, addr + SATA_P0PHYCR_REG);
+
+ return 0;
+
+err1:
+ clk_disable(da850_sata_clk);
+err0:
+ clk_put(da850_sata_clk);
+ return ret;
+}
+
+static void da850_sata_exit(struct device *dev)
+{
+ clk_disable(da850_sata_clk);
+ clk_put(da850_sata_clk);
+}
+
+static struct ahci_platform_data da850_sata_pdata = {
+ .init = da850_sata_init,
+ .exit = da850_sata_exit,
+};
+
+static u64 da850_sata_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device da850_sata_device = {
+ .name = "ahci",
+ .id = -1,
+ .dev = {
+ .platform_data = &da850_sata_pdata,
+ .dma_mask = &da850_sata_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .num_resources = ARRAY_SIZE(da850_sata_resources),
+ .resource = da850_sata_resources,
+};
+
+int __init da850_register_sata(unsigned long refclkpn)
+{
+ da850_sata_refclkpn = refclkpn;
+ if (!da850_sata_refclkpn)
+ return -EINVAL;
+
+ return platform_device_register(&da850_sata_device);
+}
+#endif
#define DA8XX_SYSCFG1_BASE (IO_PHYS + 0x22C000)
#define DA8XX_SYSCFG1_VIRT(x) (da8xx_syscfg1_base + (x))
#define DA8XX_DEEPSLEEP_REG 0x8
+#define DA8XX_PWRDN_REG 0x18
#define DA8XX_PSC0_BASE 0x01c10000
#define DA8XX_PLL0_BASE 0x01c11000
int da8xx_register_cpuidle(void);
void __iomem * __init da8xx_get_mem_ctlr(void);
int da850_register_pm(struct platform_device *pdev);
+int __init da850_register_sata(unsigned long refclkpn);
extern struct platform_device da8xx_serial_device;
extern struct emac_platform_data da8xx_emac_pdata;
#define PSC_STATE_ENABLE 3
#define MDSTAT_STATE_MASK 0x1f
+#define MDCTL_FORCE BIT(31)
#ifndef __ASSEMBLER__
extern int davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id);
extern void davinci_psc_config(unsigned int domain, unsigned int ctlr,
- unsigned int id, u32 next_state);
+ unsigned int id, bool enable, u32 flags);
#endif
#include <mach/cputype.h>
#include <mach/psc.h>
+#include "clock.h"
+
/* Return nonzero iff the domain's clock is active */
int __init davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id)
{
/* Enable or disable a PSC domain */
void davinci_psc_config(unsigned int domain, unsigned int ctlr,
- unsigned int id, u32 next_state)
+ unsigned int id, bool enable, u32 flags)
{
u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl;
void __iomem *psc_base;
struct davinci_soc_info *soc_info = &davinci_soc_info;
+ u32 next_state = PSC_STATE_ENABLE;
if (!soc_info->psc_bases || (ctlr >= soc_info->psc_bases_num)) {
pr_warning("PSC: Bad psc data: 0x%x[%d]\n",
psc_base = ioremap(soc_info->psc_bases[ctlr], SZ_4K);
+ if (!enable) {
+ if (flags & PSC_SWRSTDISABLE)
+ next_state = PSC_STATE_SWRSTDISABLE;
+ else
+ next_state = PSC_STATE_DISABLE;
+ }
+
mdctl = __raw_readl(psc_base + MDCTL + 4 * id);
mdctl &= ~MDSTAT_STATE_MASK;
mdctl |= next_state;
+ if (flags & PSC_FORCE)
+ mdctl |= MDCTL_FORCE;
__raw_writel(mdctl, psc_base + MDCTL + 4 * id);
pdstat = __raw_readl(psc_base + PDSTAT);
Enable EXYNOS4210 CPU support
config EXYNOS4_MCT
- bool "Kernel timer support by MCT"
+ bool
+ default y
help
Use MCT (Multi Core Timer) as kernel timers
help
Compile in platform device definitions for AHCI
+config EXYNOS4_SETUP_FIMD0
+ bool
+ help
+ Common setup code for FIMD0.
+
config EXYNOS4_DEV_PD
bool
help
help
Common setup code for SYSTEM MMU in EXYNOS4
+config EXYNOS4_DEV_DWMCI
+ bool
+ help
+ Compile in platform device definitions for DWMCI
+
config EXYNOS4_SETUP_I2C1
bool
help
config MACH_SMDKC210
bool "SMDKC210"
select CPU_EXYNOS4210
+ select S5P_DEV_FIMD0
select S3C_DEV_RTC
select S3C_DEV_WDT
select S3C_DEV_I2C1
select SAMSUNG_DEV_BACKLIGHT
select EXYNOS4_DEV_PD
select EXYNOS4_DEV_SYSMMU
+ select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_I2C1
select EXYNOS4_SETUP_SDHCI
help
config MACH_SMDKV310
bool "SMDKV310"
select CPU_EXYNOS4210
+ select S5P_DEV_FIMD0
select S3C_DEV_RTC
select S3C_DEV_WDT
select S3C_DEV_I2C1
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
select SAMSUNG_DEV_BACKLIGHT
+ select EXYNOS4_DEV_AHCI
select SAMSUNG_DEV_KEYPAD
select EXYNOS4_DEV_PD
select SAMSUNG_DEV_PWM
select EXYNOS4_DEV_SYSMMU
+ select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_I2C1
select EXYNOS4_SETUP_KEYPAD
select EXYNOS4_SETUP_SDHCI
config MACH_UNIVERSAL_C210
bool "Mobile UNIVERSAL_C210 Board"
select CPU_EXYNOS4210
+ select S5P_GPIO_INT
+ select S5P_DEV_FIMC0
+ select S5P_DEV_FIMC1
+ select S5P_DEV_FIMC2
+ select S5P_DEV_FIMC3
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
select S3C_DEV_I2C1
+ select S3C_DEV_I2C3
select S3C_DEV_I2C5
+ select S5P_DEV_MFC
select S5P_DEV_ONENAND
+ select EXYNOS4_DEV_PD
select EXYNOS4_SETUP_I2C1
+ select EXYNOS4_SETUP_I2C3
select EXYNOS4_SETUP_I2C5
select EXYNOS4_SETUP_SDHCI
help
select S3C_DEV_I2C1
select S3C_DEV_I2C3
select S3C_DEV_I2C5
+ select S5P_DEV_MFC
select S5P_DEV_USB_EHCI
+ select EXYNOS4_DEV_PD
select EXYNOS4_SETUP_I2C1
select EXYNOS4_SETUP_I2C3
select EXYNOS4_SETUP_I2C5
select EXYNOS4_SETUP_SDHCI
select EXYNOS4_SETUP_USB_PHY
select SAMSUNG_DEV_PWM
+ select SAMSUNG_DEV_ADC
help
Machine support for Samsung Mobile NURI Board.
# Core support for EXYNOS4 system
obj-$(CONFIG_CPU_EXYNOS4210) += cpu.o init.o clock.o irq-combiner.o
-obj-$(CONFIG_CPU_EXYNOS4210) += setup-i2c0.o irq-eint.o dma.o
+obj-$(CONFIG_CPU_EXYNOS4210) += setup-i2c0.o irq-eint.o dma.o pmu.o
obj-$(CONFIG_PM) += pm.o sleep.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
-ifeq ($(CONFIG_EXYNOS4_MCT),y)
-obj-y += mct.o
-else
-obj-y += time.o
-obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o
-endif
+obj-$(CONFIG_EXYNOS4_MCT) += mct.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
obj-$(CONFIG_EXYNOS4_DEV_AHCI) += dev-ahci.o
obj-$(CONFIG_EXYNOS4_DEV_PD) += dev-pd.o
obj-$(CONFIG_EXYNOS4_DEV_SYSMMU) += dev-sysmmu.o
+obj-$(CONFIG_EXYNOS4_DEV_DWMCI) += dev-dwmci.o
obj-$(CONFIG_EXYNOS4_SETUP_FIMC) += setup-fimc.o
+obj-$(CONFIG_EXYNOS4_SETUP_FIMD0) += setup-fimd0.o
obj-$(CONFIG_EXYNOS4_SETUP_I2C1) += setup-i2c1.o
obj-$(CONFIG_EXYNOS4_SETUP_I2C2) += setup-i2c2.o
obj-$(CONFIG_EXYNOS4_SETUP_I2C3) += setup-i2c3.o
.name = "fimg2d",
.enable = exynos4_clk_ip_image_ctrl,
.ctrlbit = (1 << 0),
+ }, {
+ .name = "mfc",
+ .devname = "s5p-mfc",
+ .enable = exynos4_clk_ip_mfc_ctrl,
+ .ctrlbit = (1 << 0),
}, {
.name = "i2c",
.devname = "s3c2440-i2c.0",
.nr_sources = ARRAY_SIZE(clkset_mout_g2d_list),
};
+static struct clk *clkset_mout_mfc0_list[] = {
+ [0] = &clk_mout_mpll.clk,
+ [1] = &clk_sclk_apll.clk,
+};
+
+static struct clksrc_sources clkset_mout_mfc0 = {
+ .sources = clkset_mout_mfc0_list,
+ .nr_sources = ARRAY_SIZE(clkset_mout_mfc0_list),
+};
+
+static struct clksrc_clk clk_mout_mfc0 = {
+ .clk = {
+ .name = "mout_mfc0",
+ },
+ .sources = &clkset_mout_mfc0,
+ .reg_src = { .reg = S5P_CLKSRC_MFC, .shift = 0, .size = 1 },
+};
+
+static struct clk *clkset_mout_mfc1_list[] = {
+ [0] = &clk_mout_epll.clk,
+ [1] = &clk_sclk_vpll.clk,
+};
+
+static struct clksrc_sources clkset_mout_mfc1 = {
+ .sources = clkset_mout_mfc1_list,
+ .nr_sources = ARRAY_SIZE(clkset_mout_mfc1_list),
+};
+
+static struct clksrc_clk clk_mout_mfc1 = {
+ .clk = {
+ .name = "mout_mfc1",
+ },
+ .sources = &clkset_mout_mfc1,
+ .reg_src = { .reg = S5P_CLKSRC_MFC, .shift = 4, .size = 1 },
+};
+
+static struct clk *clkset_mout_mfc_list[] = {
+ [0] = &clk_mout_mfc0.clk,
+ [1] = &clk_mout_mfc1.clk,
+};
+
+static struct clksrc_sources clkset_mout_mfc = {
+ .sources = clkset_mout_mfc_list,
+ .nr_sources = ARRAY_SIZE(clkset_mout_mfc_list),
+};
+
static struct clksrc_clk clk_dout_mmc0 = {
.clk = {
.name = "dout_mmc0",
.sources = &clkset_mout_g2d,
.reg_src = { .reg = S5P_CLKSRC_IMAGE, .shift = 8, .size = 1 },
.reg_div = { .reg = S5P_CLKDIV_IMAGE, .shift = 0, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_mfc",
+ .devname = "s5p-mfc",
+ },
+ .sources = &clkset_mout_mfc,
+ .reg_src = { .reg = S5P_CLKSRC_MFC, .shift = 8, .size = 1 },
+ .reg_div = { .reg = S5P_CLKDIV_MFC, .shift = 0, .size = 4 },
}, {
.clk = {
.name = "sclk_mmc",
&clk_dout_mmc2,
&clk_dout_mmc3,
&clk_dout_mmc4,
+ &clk_mout_mfc0,
+ &clk_mout_mfc1,
};
static int xtal_rate;
#include <asm/proc-fns.h>
#include <asm/hardware/cache-l2x0.h>
+#include <asm/hardware/gic.h>
#include <plat/cpu.h>
#include <plat/clock.h>
+#include <plat/devs.h>
#include <plat/exynos4.h>
+#include <plat/adc-core.h>
#include <plat/sdhci.h>
#include <plat/devs.h>
+#include <plat/fb-core.h>
#include <plat/fimc-core.h>
#include <plat/iic-core.h>
.pfn = __phys_to_pfn(EXYNOS4_PA_HSPHY),
.length = SZ_4K,
.type = MT_DEVICE,
- }
+ }, {
+ .virtual = (unsigned long)S5P_VA_GIC_CPU,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_GIC_CPU),
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_GIC_DIST,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_GIC_DIST),
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ },
};
static void exynos4_idle(void)
exynos4_default_sdhci2();
exynos4_default_sdhci3();
+ s3c_adc_setname("samsung-adc-v3");
+
s3c_fimc_setname(0, "exynos4-fimc");
s3c_fimc_setname(1, "exynos4-fimc");
s3c_fimc_setname(2, "exynos4-fimc");
s3c_i2c0_setname("s3c2440-i2c");
s3c_i2c1_setname("s3c2440-i2c");
s3c_i2c2_setname("s3c2440-i2c");
+
+ s5p_fb_setname(0, "exynos4-fb");
}
void __init exynos4_init_clocks(int xtal)
exynos4_setup_clocks();
}
+static void exynos4_gic_irq_eoi(struct irq_data *d)
+{
+ struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
+
+ gic_data->cpu_base = S5P_VA_GIC_CPU +
+ (EXYNOS4_GIC_BANK_OFFSET * smp_processor_id());
+}
+
void __init exynos4_init_irq(void)
{
int irq;
- gic_init(0, IRQ_LOCALTIMER, S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
+ gic_init(0, IRQ_SPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
+ gic_arch_extn.irq_eoi = exynos4_gic_irq_eoi;
for (irq = 0; irq < MAX_COMBINER_NR; irq++) {
- /*
- * From SPI(0) to SPI(39) and SPI(51), SPI(53) are
- * connected to the interrupt combiner. These irqs
- * should be initialized to support cascade interrupt.
- */
- if ((irq >= 40) && !(irq == 51) && !(irq == 53))
- continue;
-
combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq),
COMBINER_IRQ(irq, 0));
combiner_cascade_irq(irq, IRQ_SPI(irq));
#include <mach/map.h>
#include <mach/dma.h>
#include <mach/irqs.h>
+#include <mach/regs-audss.h>
static const char *rclksrc[] = {
[0] = "busclk",
.quirks = QUIRK_PRI_6CHAN | QUIRK_SEC_DAI
| QUIRK_NEED_RSTCLR,
.src_clk = rclksrc,
+ .idma_addr = EXYNOS4_AUDSS_INT_MEM,
},
},
};
--- /dev/null
+/*
+ * linux/arch/arm/mach-exynos4/dev-dwmci.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Platform device for Synopsys DesignWare Mobile Storage IP
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/mmc/dw_mmc.h>
+
+#include <plat/devs.h>
+
+#include <mach/map.h>
+
+static int exynos4_dwmci_get_bus_wd(u32 slot_id)
+{
+ return 4;
+}
+
+static int exynos4_dwmci_init(u32 slot_id, irq_handler_t handler, void *data)
+{
+ return 0;
+}
+
+static struct resource exynos4_dwmci_resource[] = {
+ [0] = {
+ .start = EXYNOS4_PA_DWMCI,
+ .end = EXYNOS4_PA_DWMCI + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_DWMCI,
+ .end = IRQ_DWMCI,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct dw_mci_board exynos4_dwci_pdata = {
+ .num_slots = 1,
+ .quirks = DW_MCI_QUIRK_BROKEN_CARD_DETECTION,
+ .bus_hz = 80 * 1000 * 1000,
+ .detect_delay_ms = 200,
+ .init = exynos4_dwmci_init,
+ .get_bus_wd = exynos4_dwmci_get_bus_wd,
+};
+
+static u64 exynos4_dwmci_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device exynos4_device_dwmci = {
+ .name = "dw_mmc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(exynos4_dwmci_resource),
+ .resource = exynos4_dwmci_resource,
+ .dev = {
+ .dma_mask = &exynos4_dwmci_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &exynos4_dwci_pdata,
+ },
+};
+
+void __init exynos4_dwmci_set_platdata(struct dw_mci_board *pd)
+{
+ struct dw_mci_board *npd;
+
+ npd = s3c_set_platdata(pd, sizeof(struct dw_mci_board),
+ &exynos4_device_dwmci);
+
+ if (!npd->init)
+ npd->init = exynos4_dwmci_init;
+ if (!npd->get_bus_wd)
+ npd->get_bus_wd = exynos4_dwmci_get_bus_wd;
+}
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/smp.h>
+#include <linux/io.h>
#include <asm/cacheflush.h>
+#include <mach/regs-pmu.h>
+
extern volatile int pen_release;
static inline void cpu_enter_lowpower(void)
static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
{
- /*
- * there is no power-control hardware on this platform, so all
- * we can do is put the core into WFI; this is safe as the calling
- * code will have already disabled interrupts
- */
for (;;) {
+
+ /* make cpu1 to be turned off at next WFI command */
+ if (cpu == 1)
+ __raw_writel(0, S5P_ARM_CORE1_CONFIGURATION);
+
/*
* here's the WFI
*/
--- /dev/null
+/* linux/arch/arm/mach-exynos4/include/mach/dwmci.h
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Synopsys DesignWare Mobile Storage for EXYNOS4210
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARM_ARCH_DWMCI_H
+#define __ASM_ARM_ARCH_DWMCI_H __FILE__
+
+#include <linux/mmc/dw_mmc.h>
+
+extern void exynos4_dwmci_set_platdata(struct dw_mci_board *pd);
+
+#endif /* __ASM_ARM_ARCH_DWMCI_H */
*/
#include <mach/hardware.h>
+#include <mach/map.h>
#include <asm/hardware/gic.h>
.macro disable_fiq
.macro get_irqnr_preamble, base, tmp
ldr \base, =gic_cpu_base_addr
ldr \base, [\base]
+ mrc p15, 0, \tmp, c0, c0, 5
+ and \tmp, \tmp, #3
+ cmp \tmp, #1
+ addeq \base, \base, #EXYNOS4_GIC_BANK_OFFSET
.endm
.macro arch_ret_to_user, tmp1, tmp2
/* As above, this assumes that irqstat and base are preserved.. */
.macro test_for_ltirq, irqnr, irqstat, base, tmp
- bic \irqnr, \irqstat, #0x1c00
- mov \tmp, #0
- cmp \irqnr, #29
- moveq \tmp, #1
- streq \irqstat, [\base, #GIC_CPU_EOI]
- cmp \tmp, #0
.endm
#define IRQ_PPI(x) S5P_IRQ(x+16)
-#define IRQ_LOCALTIMER IRQ_PPI(13)
-
/* SPI: Shared Peripheral Interrupt */
#define IRQ_SPI(x) S5P_IRQ(x+32)
-#define IRQ_MCT1 IRQ_SPI(35)
-
-#define IRQ_EINT0 IRQ_SPI(40)
-#define IRQ_EINT1 IRQ_SPI(41)
-#define IRQ_EINT2 IRQ_SPI(42)
-#define IRQ_EINT3 IRQ_SPI(43)
-#define IRQ_USB_HSOTG IRQ_SPI(44)
-#define IRQ_USB_HOST IRQ_SPI(45)
-#define IRQ_MODEM_IF IRQ_SPI(46)
-#define IRQ_ROTATOR IRQ_SPI(47)
-#define IRQ_JPEG IRQ_SPI(48)
-#define IRQ_2D IRQ_SPI(49)
-#define IRQ_PCIE IRQ_SPI(50)
-#define IRQ_MCT0 IRQ_SPI(51)
-#define IRQ_MFC IRQ_SPI(52)
-#define IRQ_AUDIO_SS IRQ_SPI(54)
-#define IRQ_AC97 IRQ_SPI(55)
-#define IRQ_SPDIF IRQ_SPI(56)
-#define IRQ_KEYPAD IRQ_SPI(57)
-#define IRQ_INTFEEDCTRL_SSS IRQ_SPI(58)
-#define IRQ_SLIMBUS IRQ_SPI(59)
-#define IRQ_PMU IRQ_SPI(60)
-#define IRQ_TSI IRQ_SPI(61)
-#define IRQ_SATA IRQ_SPI(62)
-#define IRQ_GPS IRQ_SPI(63)
+#define IRQ_EINT0 IRQ_SPI(16)
+#define IRQ_EINT1 IRQ_SPI(17)
+#define IRQ_EINT2 IRQ_SPI(18)
+#define IRQ_EINT3 IRQ_SPI(19)
+#define IRQ_EINT4 IRQ_SPI(20)
+#define IRQ_EINT5 IRQ_SPI(21)
+#define IRQ_EINT6 IRQ_SPI(22)
+#define IRQ_EINT7 IRQ_SPI(23)
+#define IRQ_EINT8 IRQ_SPI(24)
+#define IRQ_EINT9 IRQ_SPI(25)
+#define IRQ_EINT10 IRQ_SPI(26)
+#define IRQ_EINT11 IRQ_SPI(27)
+#define IRQ_EINT12 IRQ_SPI(28)
+#define IRQ_EINT13 IRQ_SPI(29)
+#define IRQ_EINT14 IRQ_SPI(30)
+#define IRQ_EINT15 IRQ_SPI(31)
+#define IRQ_EINT16_31 IRQ_SPI(32)
+
+#define IRQ_PDMA0 IRQ_SPI(35)
+#define IRQ_PDMA1 IRQ_SPI(36)
+#define IRQ_TIMER0_VIC IRQ_SPI(37)
+#define IRQ_TIMER1_VIC IRQ_SPI(38)
+#define IRQ_TIMER2_VIC IRQ_SPI(39)
+#define IRQ_TIMER3_VIC IRQ_SPI(40)
+#define IRQ_TIMER4_VIC IRQ_SPI(41)
+#define IRQ_MCT_L0 IRQ_SPI(42)
+#define IRQ_WDT IRQ_SPI(43)
+#define IRQ_RTC_ALARM IRQ_SPI(44)
+#define IRQ_RTC_TIC IRQ_SPI(45)
+#define IRQ_GPIO_XB IRQ_SPI(46)
+#define IRQ_GPIO_XA IRQ_SPI(47)
+#define IRQ_MCT_L1 IRQ_SPI(48)
+
+#define IRQ_UART0 IRQ_SPI(52)
+#define IRQ_UART1 IRQ_SPI(53)
+#define IRQ_UART2 IRQ_SPI(54)
+#define IRQ_UART3 IRQ_SPI(55)
+#define IRQ_UART4 IRQ_SPI(56)
+#define IRQ_MCT_G0 IRQ_SPI(57)
+#define IRQ_IIC IRQ_SPI(58)
+#define IRQ_IIC1 IRQ_SPI(59)
+#define IRQ_IIC2 IRQ_SPI(60)
+#define IRQ_IIC3 IRQ_SPI(61)
+#define IRQ_IIC4 IRQ_SPI(62)
+#define IRQ_IIC5 IRQ_SPI(63)
+#define IRQ_IIC6 IRQ_SPI(64)
+#define IRQ_IIC7 IRQ_SPI(65)
+
+#define IRQ_USB_HOST IRQ_SPI(70)
+#define IRQ_USB_HSOTG IRQ_SPI(71)
+#define IRQ_MODEM_IF IRQ_SPI(72)
+#define IRQ_HSMMC0 IRQ_SPI(73)
+#define IRQ_HSMMC1 IRQ_SPI(74)
+#define IRQ_HSMMC2 IRQ_SPI(75)
+#define IRQ_HSMMC3 IRQ_SPI(76)
+#define IRQ_DWMCI IRQ_SPI(77)
+
+#define IRQ_MIPICSI0 IRQ_SPI(78)
+
+#define IRQ_MIPICSI1 IRQ_SPI(80)
+
+#define IRQ_ONENAND_AUDI IRQ_SPI(82)
+#define IRQ_ROTATOR IRQ_SPI(83)
+#define IRQ_FIMC0 IRQ_SPI(84)
+#define IRQ_FIMC1 IRQ_SPI(85)
+#define IRQ_FIMC2 IRQ_SPI(86)
+#define IRQ_FIMC3 IRQ_SPI(87)
+#define IRQ_JPEG IRQ_SPI(88)
+#define IRQ_2D IRQ_SPI(89)
+#define IRQ_PCIE IRQ_SPI(90)
+
+#define IRQ_MFC IRQ_SPI(94)
+
+#define IRQ_AUDIO_SS IRQ_SPI(96)
+#define IRQ_I2S0 IRQ_SPI(97)
+#define IRQ_I2S1 IRQ_SPI(98)
+#define IRQ_I2S2 IRQ_SPI(99)
+#define IRQ_AC97 IRQ_SPI(100)
+
+#define IRQ_SPDIF IRQ_SPI(104)
+#define IRQ_ADC0 IRQ_SPI(105)
+#define IRQ_PEN0 IRQ_SPI(106)
+#define IRQ_ADC1 IRQ_SPI(107)
+#define IRQ_PEN1 IRQ_SPI(108)
+#define IRQ_KEYPAD IRQ_SPI(109)
+#define IRQ_PMU IRQ_SPI(110)
+#define IRQ_GPS IRQ_SPI(111)
+#define IRQ_INTFEEDCTRL_SSS IRQ_SPI(112)
+#define IRQ_SLIMBUS IRQ_SPI(113)
+
+#define IRQ_TSI IRQ_SPI(115)
+#define IRQ_SATA IRQ_SPI(116)
#define MAX_IRQ_IN_COMBINER 8
-#define COMBINER_GROUP(x) ((x) * MAX_IRQ_IN_COMBINER + IRQ_SPI(64))
+#define COMBINER_GROUP(x) ((x) * MAX_IRQ_IN_COMBINER + IRQ_SPI(128))
#define COMBINER_IRQ(x, y) (COMBINER_GROUP(x) + y)
#define IRQ_SYSMMU_MDMA0_0 COMBINER_IRQ(4, 0)
#define IRQ_SYSMMU_MFC_M1_0 COMBINER_IRQ(5, 6)
#define IRQ_SYSMMU_PCIE_0 COMBINER_IRQ(5, 7)
-#define IRQ_PDMA0 COMBINER_IRQ(21, 0)
-#define IRQ_PDMA1 COMBINER_IRQ(21, 1)
-
-#define IRQ_TIMER0_VIC COMBINER_IRQ(22, 0)
-#define IRQ_TIMER1_VIC COMBINER_IRQ(22, 1)
-#define IRQ_TIMER2_VIC COMBINER_IRQ(22, 2)
-#define IRQ_TIMER3_VIC COMBINER_IRQ(22, 3)
-#define IRQ_TIMER4_VIC COMBINER_IRQ(22, 4)
-
-#define IRQ_RTC_ALARM COMBINER_IRQ(23, 0)
-#define IRQ_RTC_TIC COMBINER_IRQ(23, 1)
-
-#define IRQ_GPIO_XB COMBINER_IRQ(24, 0)
-#define IRQ_GPIO_XA COMBINER_IRQ(24, 1)
-
-#define IRQ_UART0 COMBINER_IRQ(26, 0)
-#define IRQ_UART1 COMBINER_IRQ(26, 1)
-#define IRQ_UART2 COMBINER_IRQ(26, 2)
-#define IRQ_UART3 COMBINER_IRQ(26, 3)
-#define IRQ_UART4 COMBINER_IRQ(26, 4)
-
-#define IRQ_IIC COMBINER_IRQ(27, 0)
-#define IRQ_IIC1 COMBINER_IRQ(27, 1)
-#define IRQ_IIC2 COMBINER_IRQ(27, 2)
-#define IRQ_IIC3 COMBINER_IRQ(27, 3)
-#define IRQ_IIC4 COMBINER_IRQ(27, 4)
-#define IRQ_IIC5 COMBINER_IRQ(27, 5)
-#define IRQ_IIC6 COMBINER_IRQ(27, 6)
-#define IRQ_IIC7 COMBINER_IRQ(27, 7)
-
-#define IRQ_HSMMC0 COMBINER_IRQ(29, 0)
-#define IRQ_HSMMC1 COMBINER_IRQ(29, 1)
-#define IRQ_HSMMC2 COMBINER_IRQ(29, 2)
-#define IRQ_HSMMC3 COMBINER_IRQ(29, 3)
-
-#define IRQ_MIPI_CSIS0 COMBINER_IRQ(30, 0)
-#define IRQ_MIPI_CSIS1 COMBINER_IRQ(30, 1)
-
-#define IRQ_FIMC0 COMBINER_IRQ(32, 0)
-#define IRQ_FIMC1 COMBINER_IRQ(32, 1)
-#define IRQ_FIMC2 COMBINER_IRQ(33, 0)
-#define IRQ_FIMC3 COMBINER_IRQ(33, 1)
-
-#define IRQ_ONENAND_AUDI COMBINER_IRQ(34, 0)
-
-#define IRQ_MCT_L1 COMBINER_IRQ(35, 3)
-
-#define IRQ_EINT4 COMBINER_IRQ(37, 0)
-#define IRQ_EINT5 COMBINER_IRQ(37, 1)
-#define IRQ_EINT6 COMBINER_IRQ(37, 2)
-#define IRQ_EINT7 COMBINER_IRQ(37, 3)
-#define IRQ_EINT8 COMBINER_IRQ(38, 0)
-
-#define IRQ_EINT9 COMBINER_IRQ(38, 1)
-#define IRQ_EINT10 COMBINER_IRQ(38, 2)
-#define IRQ_EINT11 COMBINER_IRQ(38, 3)
-#define IRQ_EINT12 COMBINER_IRQ(38, 4)
-#define IRQ_EINT13 COMBINER_IRQ(38, 5)
-#define IRQ_EINT14 COMBINER_IRQ(38, 6)
-#define IRQ_EINT15 COMBINER_IRQ(38, 7)
-
-#define IRQ_EINT16_31 COMBINER_IRQ(39, 0)
-
-#define IRQ_MCT_L0 COMBINER_IRQ(51, 0)
+#define IRQ_FIMD0_FIFO COMBINER_IRQ(11, 0)
+#define IRQ_FIMD0_VSYNC COMBINER_IRQ(11, 1)
+#define IRQ_FIMD0_SYSTEM COMBINER_IRQ(11, 2)
-#define IRQ_WDT COMBINER_IRQ(53, 0)
-#define IRQ_MCT_G0 COMBINER_IRQ(53, 4)
+#define MAX_COMBINER_NR 16
-#define MAX_COMBINER_NR 54
+#define IRQ_ADC IRQ_ADC0
+#define IRQ_TC IRQ_PEN0
#define S5P_IRQ_EINT_BASE COMBINER_IRQ(MAX_COMBINER_NR, 0)
#define IRQ_GPIO_END (S5P_GPIOINT_BASE + S5P_GPIOINT_COUNT)
/* Set the default NR_IRQS */
-#define NR_IRQS (IRQ_GPIO_END)
+#define NR_IRQS (IRQ_GPIO_END + 64)
#endif /* __ASM_ARCH_IRQS_H */
#define EXYNOS4_PA_DMC0 0x10400000
-#define EXYNOS4_PA_COMBINER 0x10448000
+#define EXYNOS4_PA_COMBINER 0x10440000
+
+#define EXYNOS4_PA_GIC_CPU 0x10480000
+#define EXYNOS4_PA_GIC_DIST 0x10490000
+#define EXYNOS4_GIC_BANK_OFFSET 0x8000
#define EXYNOS4_PA_COREPERI 0x10500000
-#define EXYNOS4_PA_GIC_CPU 0x10500100
#define EXYNOS4_PA_TWD 0x10500600
-#define EXYNOS4_PA_GIC_DIST 0x10501000
#define EXYNOS4_PA_L2CC 0x10502000
#define EXYNOS4_PA_MDMA 0x10810000
#define EXYNOS4_PA_MIPI_CSIS0 0x11880000
#define EXYNOS4_PA_MIPI_CSIS1 0x11890000
+#define EXYNOS4_PA_FIMD0 0x11C00000
+
#define EXYNOS4_PA_HSMMC(x) (0x12510000 + ((x) * 0x10000))
+#define EXYNOS4_PA_DWMCI 0x12550000
#define EXYNOS4_PA_SATA 0x12560000
#define EXYNOS4_PA_SATAPHY 0x125D0000
#define EXYNOS4_PA_EHCI 0x12580000
#define EXYNOS4_PA_HSPHY 0x125B0000
+#define EXYNOS4_PA_MFC 0x13400000
#define EXYNOS4_PA_UART 0x13800000
#define EXYNOS4_PA_IIC(x) (0x13860000 + ((x) * 0x10000))
+#define EXYNOS4_PA_ADC 0x13910000
+#define EXYNOS4_PA_ADC1 0x13911000
+
#define EXYNOS4_PA_AC97 0x139A0000
#define EXYNOS4_PA_SPDIF 0x139B0000
#define S3C_PA_IIC5 EXYNOS4_PA_IIC(5)
#define S3C_PA_IIC6 EXYNOS4_PA_IIC(6)
#define S3C_PA_IIC7 EXYNOS4_PA_IIC(7)
+#define SAMSUNG_PA_ADC EXYNOS4_PA_ADC
+#define SAMSUNG_PA_ADC1 EXYNOS4_PA_ADC1
#define S3C_PA_RTC EXYNOS4_PA_RTC
#define S3C_PA_WDT EXYNOS4_PA_WATCHDOG
#define S5P_PA_FIMC3 EXYNOS4_PA_FIMC3
#define S5P_PA_MIPI_CSIS0 EXYNOS4_PA_MIPI_CSIS0
#define S5P_PA_MIPI_CSIS1 EXYNOS4_PA_MIPI_CSIS1
+#define S5P_PA_FIMD0 EXYNOS4_PA_FIMD0
#define S5P_PA_ONENAND EXYNOS4_PA_ONENAND
#define S5P_PA_ONENAND_DMA EXYNOS4_PA_ONENAND_DMA
#define S5P_PA_SDRAM EXYNOS4_PA_SDRAM
#define S5P_PA_SROMC EXYNOS4_PA_SROMC
+#define S5P_PA_MFC EXYNOS4_PA_MFC
#define S5P_PA_SYSCON EXYNOS4_PA_SYSCON
#define S5P_PA_TIMER EXYNOS4_PA_TIMER
#define S5P_PA_EHCI EXYNOS4_PA_EHCI
{
/* nothing here yet */
}
+
+static inline void s3c_pm_restored_gpios(void)
+{
+ /* nothing here yet */
+}
+
+static inline void s3c_pm_saved_gpios(void)
+{
+ /* nothing here yet */
+}
--- /dev/null
+/* linux/arch/arm/mach-exynos4/include/mach/pmu.h
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * EXYNOS4210 - PMU(Power Management Unit) support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_PMU_H
+#define __ASM_ARCH_PMU_H __FILE__
+
+enum sys_powerdown {
+ SYS_AFTR,
+ SYS_LPA,
+ SYS_SLEEP,
+ NUM_SYS_POWERDOWN,
+};
+
+extern void exynos4_sys_powerdown_conf(enum sys_powerdown mode);
+
+#endif /* __ASM_ARCH_PMU_H */
--- /dev/null
+/* arch/arm/mach-exynos4/include/mach/regs-audss.h
+ *
+ * Copyright (c) 2011 Samsung Electronics
+ * http://www.samsung.com
+ *
+ * Exynos4 Audio SubSystem clock register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_REGS_AUDSS_H
+#define __PLAT_REGS_AUDSS_H __FILE__
+
+#define EXYNOS4_AUDSS_INT_MEM (0x03000000)
+
+#endif /* _PLAT_REGS_AUDSS_H */
#define S5P_CLKDIV_STAT_RIGHTBUS S5P_CLKREG(0x08600)
#define S5P_CLKGATE_IP_RIGHTBUS S5P_CLKREG(0x08800)
+#define S5P_EPLL_LOCK S5P_CLKREG(0x0C010)
+#define S5P_VPLL_LOCK S5P_CLKREG(0x0C020)
+
#define S5P_EPLL_CON0 S5P_CLKREG(0x0C110)
#define S5P_EPLL_CON1 S5P_CLKREG(0x0C114)
#define S5P_VPLL_CON0 S5P_CLKREG(0x0C120)
#define S5P_CLKSRC_TOP0 S5P_CLKREG(0x0C210)
#define S5P_CLKSRC_TOP1 S5P_CLKREG(0x0C214)
#define S5P_CLKSRC_CAM S5P_CLKREG(0x0C220)
+#define S5P_CLKSRC_TV S5P_CLKREG(0x0C224)
#define S5P_CLKSRC_MFC S5P_CLKREG(0x0C228)
+#define S5P_CLKSRC_G3D S5P_CLKREG(0x0C22C)
#define S5P_CLKSRC_IMAGE S5P_CLKREG(0x0C230)
#define S5P_CLKSRC_LCD0 S5P_CLKREG(0x0C234)
#define S5P_CLKSRC_LCD1 S5P_CLKREG(0x0C238)
#define S5P_CLKDIV_PERIL3 S5P_CLKREG(0x0C55C)
#define S5P_CLKDIV_PERIL4 S5P_CLKREG(0x0C560)
#define S5P_CLKDIV_PERIL5 S5P_CLKREG(0x0C564)
+#define S5P_CLKDIV2_RATIO S5P_CLKREG(0x0C580)
#define S5P_CLKSRC_MASK_TOP S5P_CLKREG(0x0C310)
#define S5P_CLKSRC_MASK_CAM S5P_CLKREG(0x0C320)
#define S5P_APLL_VAL_1000 ((250 << 16) | (6 << 8) | 1)
#define S5P_APLL_VAL_800 ((200 << 16) | (6 << 8) | 1)
+#define S5P_EPLLCON0_ENABLE_SHIFT (31)
+#define S5P_EPLLCON0_LOCKED_SHIFT (29)
+
+#define S5P_VPLLCON0_ENABLE_SHIFT (31)
+#define S5P_VPLLCON0_LOCKED_SHIFT (29)
+
#define S5P_CLKSRC_CPU_MUXCORE_SHIFT (16)
#define S5P_CLKMUX_STATCPU_MUXCORE_MASK (0x7 << S5P_CLKSRC_CPU_MUXCORE_SHIFT)
#define S5P_PMU_GPS_CONF S5P_PMUREG(0x3CE0)
#define S5P_PMU_SATA_PHY_CONTROL_EN 0x1
+#define S5P_CORE_LOCAL_PWR_EN 0x3
#define S5P_INT_LOCAL_PWR_EN 0x7
#define S5P_CHECK_SLEEP 0x00000BAD
+++ /dev/null
-/* linux/arch/arm/mach-exynos4/localtimer.c
- *
- * Cloned from linux/arch/arm/mach-realview/localtimer.c
- *
- * Copyright (C) 2002 ARM Ltd.
- * All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/clockchips.h>
-
-#include <asm/irq.h>
-#include <asm/localtimer.h>
-
-/*
- * Setup the local clock events for a CPU.
- */
-int __cpuinit local_timer_setup(struct clock_event_device *evt)
-{
- evt->irq = IRQ_LOCALTIMER;
- twd_timer_setup(evt);
- return 0;
-}
#include <linux/input.h>
#include <linux/i2c.h>
#include <linux/i2c/atmel_mxt_ts.h>
+#include <linux/i2c-gpio.h>
#include <linux/gpio_keys.h>
#include <linux/gpio.h>
+#include <linux/power/max8903_charger.h>
+#include <linux/power/max17042_battery.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
+#include <linux/mfd/max8997.h>
+#include <linux/mfd/max8997-private.h>
#include <linux/mmc/host.h>
#include <linux/fb.h>
#include <linux/pwm_backlight.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
+#include <plat/adc.h>
#include <plat/regs-serial.h>
#include <plat/exynos4.h>
#include <plat/cpu.h>
#include <plat/clock.h>
#include <plat/gpio-cfg.h>
#include <plat/iic.h>
+#include <plat/mfc.h>
+#include <plat/pd.h>
#include <mach/map.h>
enum fixed_regulator_id {
FIXED_REG_ID_MMC = 0,
+ FIXED_REG_ID_MAX8903,
};
static struct s3c2410_uartcfg nuri_uartcfgs[] __initdata = {
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
}
+static struct regulator_consumer_supply __initdata max8997_ldo1_[] = {
+ REGULATOR_SUPPLY("vdd", "s5p-adc"), /* Used by CPU's ADC drv */
+};
+static struct regulator_consumer_supply __initdata max8997_ldo3_[] = {
+ REGULATOR_SUPPLY("vdd11", "s5p-mipi-csis.0"), /* MIPI */
+};
+static struct regulator_consumer_supply __initdata max8997_ldo4_[] = {
+ REGULATOR_SUPPLY("vdd18", "s5p-mipi-csis.0"), /* MIPI */
+};
+static struct regulator_consumer_supply __initdata max8997_ldo5_[] = {
+ REGULATOR_SUPPLY("vhsic", "modemctl"), /* MODEM */
+};
+static struct regulator_consumer_supply __initdata max8997_ldo7_[] = {
+ REGULATOR_SUPPLY("dig_18", "0-001f"), /* HCD803 */
+};
+static struct regulator_consumer_supply __initdata max8997_ldo8_[] = {
+ REGULATOR_SUPPLY("vusb_d", NULL), /* Used by CPU */
+ REGULATOR_SUPPLY("vdac", NULL), /* Used by CPU */
+};
+static struct regulator_consumer_supply __initdata max8997_ldo11_[] = {
+ REGULATOR_SUPPLY("vcc", "platform-lcd"), /* U804 LVDS */
+};
+static struct regulator_consumer_supply __initdata max8997_ldo12_[] = {
+ REGULATOR_SUPPLY("vddio", "6-003c"), /* HDC802 */
+};
+static struct regulator_consumer_supply __initdata max8997_ldo13_[] = {
+ REGULATOR_SUPPLY("vmmc", "s3c-sdhci.2"), /* TFLASH */
+};
+static struct regulator_consumer_supply __initdata max8997_ldo14_[] = {
+ REGULATOR_SUPPLY("inmotor", "max8997-haptic"),
+};
+static struct regulator_consumer_supply __initdata max8997_ldo15_[] = {
+ REGULATOR_SUPPLY("avdd", "3-004a"), /* Touch Screen */
+};
+static struct regulator_consumer_supply __initdata max8997_ldo16_[] = {
+ REGULATOR_SUPPLY("d_sensor", "0-001f"), /* HDC803 */
+};
+static struct regulator_consumer_supply __initdata max8997_ldo18_[] = {
+ REGULATOR_SUPPLY("vdd", "3-004a"), /* Touch Screen */
+};
+static struct regulator_consumer_supply __initdata max8997_buck1_[] = {
+ REGULATOR_SUPPLY("vdd_arm", NULL), /* CPUFREQ */
+};
+static struct regulator_consumer_supply __initdata max8997_buck2_[] = {
+ REGULATOR_SUPPLY("vdd_int", NULL), /* CPUFREQ */
+};
+static struct regulator_consumer_supply __initdata max8997_buck3_[] = {
+ REGULATOR_SUPPLY("vdd", "mali_dev.0"), /* G3D of Exynos 4 */
+};
+static struct regulator_consumer_supply __initdata max8997_buck4_[] = {
+ REGULATOR_SUPPLY("core", "0-001f"), /* HDC803 */
+};
+static struct regulator_consumer_supply __initdata max8997_buck6_[] = {
+ REGULATOR_SUPPLY("dig_28", "0-001f"), /* pin "7" of HDC803 */
+};
+static struct regulator_consumer_supply __initdata max8997_esafeout1_[] = {
+ REGULATOR_SUPPLY("usb_vbus", NULL), /* CPU's USB OTG */
+};
+static struct regulator_consumer_supply __initdata max8997_esafeout2_[] = {
+ REGULATOR_SUPPLY("usb_vbus", "modemctl"), /* VBUS of Modem */
+};
+
+static struct regulator_consumer_supply __initdata max8997_charger_[] = {
+ REGULATOR_SUPPLY("vinchg1", "charger-manager.0"),
+};
+static struct regulator_consumer_supply __initdata max8997_chg_toff_[] = {
+ REGULATOR_SUPPLY("vinchg_stop", NULL), /* for jack interrupt handlers */
+};
+
+static struct regulator_consumer_supply __initdata max8997_32khz_ap_[] = {
+ REGULATOR_SUPPLY("gps_clk", "bcm4751"),
+ REGULATOR_SUPPLY("bt_clk", "bcm4330-b1"),
+ REGULATOR_SUPPLY("wifi_clk", "bcm433-b1"),
+};
+
+static struct regulator_init_data __initdata max8997_ldo1_data = {
+ .constraints = {
+ .name = "VADC_3.3V_C210",
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .apply_uV = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_ldo1_),
+ .consumer_supplies = max8997_ldo1_,
+};
+
+static struct regulator_init_data __initdata max8997_ldo2_data = {
+ .constraints = {
+ .name = "VALIVE_1.1V_C210",
+ .min_uV = 1100000,
+ .max_uV = 1100000,
+ .apply_uV = 1,
+ .always_on = 1,
+ .state_mem = {
+ .enabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data __initdata max8997_ldo3_data = {
+ .constraints = {
+ .name = "VUSB_1.1V_C210",
+ .min_uV = 1100000,
+ .max_uV = 1100000,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .apply_uV = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_ldo3_),
+ .consumer_supplies = max8997_ldo3_,
+};
+
+static struct regulator_init_data __initdata max8997_ldo4_data = {
+ .constraints = {
+ .name = "VMIPI_1.8V",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .apply_uV = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_ldo4_),
+ .consumer_supplies = max8997_ldo4_,
+};
+
+static struct regulator_init_data __initdata max8997_ldo5_data = {
+ .constraints = {
+ .name = "VHSIC_1.2V_C210",
+ .min_uV = 1200000,
+ .max_uV = 1200000,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .apply_uV = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_ldo5_),
+ .consumer_supplies = max8997_ldo5_,
+};
+
+static struct regulator_init_data __initdata max8997_ldo6_data = {
+ .constraints = {
+ .name = "VCC_1.8V_PDA",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = 1,
+ .always_on = 1,
+ .state_mem = {
+ .enabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data __initdata max8997_ldo7_data = {
+ .constraints = {
+ .name = "CAM_ISP_1.8V",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .apply_uV = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_ldo7_),
+ .consumer_supplies = max8997_ldo7_,
+};
+
+static struct regulator_init_data __initdata max8997_ldo8_data = {
+ .constraints = {
+ .name = "VUSB/VDAC_3.3V_C210",
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .apply_uV = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_ldo8_),
+ .consumer_supplies = max8997_ldo8_,
+};
+
+static struct regulator_init_data __initdata max8997_ldo9_data = {
+ .constraints = {
+ .name = "VCC_2.8V_PDA",
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ .apply_uV = 1,
+ .always_on = 1,
+ .state_mem = {
+ .enabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data __initdata max8997_ldo10_data = {
+ .constraints = {
+ .name = "VPLL_1.1V_C210",
+ .min_uV = 1100000,
+ .max_uV = 1100000,
+ .apply_uV = 1,
+ .always_on = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data __initdata max8997_ldo11_data = {
+ .constraints = {
+ .name = "LVDS_VDD3.3V",
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .apply_uV = 1,
+ .boot_on = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_ldo11_),
+ .consumer_supplies = max8997_ldo11_,
+};
+
+static struct regulator_init_data __initdata max8997_ldo12_data = {
+ .constraints = {
+ .name = "VT_CAM_1.8V",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .apply_uV = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_ldo12_),
+ .consumer_supplies = max8997_ldo12_,
+};
+
+static struct regulator_init_data __initdata max8997_ldo13_data = {
+ .constraints = {
+ .name = "VTF_2.8V",
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .apply_uV = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_ldo13_),
+ .consumer_supplies = max8997_ldo13_,
+};
+
+static struct regulator_init_data __initdata max8997_ldo14_data = {
+ .constraints = {
+ .name = "VCC_3.0V_MOTOR",
+ .min_uV = 3000000,
+ .max_uV = 3000000,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .apply_uV = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_ldo14_),
+ .consumer_supplies = max8997_ldo14_,
+};
+
+static struct regulator_init_data __initdata max8997_ldo15_data = {
+ .constraints = {
+ .name = "VTOUCH_ADVV2.8V",
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_ldo15_),
+ .consumer_supplies = max8997_ldo15_,
+};
+
+static struct regulator_init_data __initdata max8997_ldo16_data = {
+ .constraints = {
+ .name = "CAM_SENSOR_IO_1.8V",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .apply_uV = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_ldo16_),
+ .consumer_supplies = max8997_ldo16_,
+};
+
+static struct regulator_init_data __initdata max8997_ldo18_data = {
+ .constraints = {
+ .name = "VTOUCH_VDD2.8V",
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .apply_uV = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_ldo18_),
+ .consumer_supplies = max8997_ldo18_,
+};
+
+static struct regulator_init_data __initdata max8997_ldo21_data = {
+ .constraints = {
+ .name = "VDDQ_M1M2_1.2V",
+ .min_uV = 1200000,
+ .max_uV = 1200000,
+ .apply_uV = 1,
+ .always_on = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data __initdata max8997_buck1_data = {
+ .constraints = {
+ .name = "VARM_1.2V_C210",
+ .min_uV = 900000,
+ .max_uV = 1350000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ .always_on = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_buck1_),
+ .consumer_supplies = max8997_buck1_,
+};
+
+static struct regulator_init_data __initdata max8997_buck2_data = {
+ .constraints = {
+ .name = "VINT_1.1V_C210",
+ .min_uV = 900000,
+ .max_uV = 1100000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ .always_on = 1,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_buck2_),
+ .consumer_supplies = max8997_buck2_,
+};
+
+static struct regulator_init_data __initdata max8997_buck3_data = {
+ .constraints = {
+ .name = "VG3D_1.1V_C210",
+ .min_uV = 900000,
+ .max_uV = 1100000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_buck3_),
+ .consumer_supplies = max8997_buck3_,
+};
+
+static struct regulator_init_data __initdata max8997_buck4_data = {
+ .constraints = {
+ .name = "CAM_ISP_CORE_1.2V",
+ .min_uV = 1200000,
+ .max_uV = 1200000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_buck4_),
+ .consumer_supplies = max8997_buck4_,
+};
+
+static struct regulator_init_data __initdata max8997_buck5_data = {
+ .constraints = {
+ .name = "VMEM_1.2V_C210",
+ .min_uV = 1200000,
+ .max_uV = 1200000,
+ .apply_uV = 1,
+ .always_on = 1,
+ .state_mem = {
+ .enabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data __initdata max8997_buck6_data = {
+ .constraints = {
+ .name = "CAM_AF_2.8V",
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_buck6_),
+ .consumer_supplies = max8997_buck6_,
+};
+
+static struct regulator_init_data __initdata max8997_buck7_data = {
+ .constraints = {
+ .name = "VCC_SUB_2.0V",
+ .min_uV = 2000000,
+ .max_uV = 2000000,
+ .apply_uV = 1,
+ .always_on = 1,
+ .state_mem = {
+ .enabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data __initdata max8997_32khz_ap_data = {
+ .constraints = {
+ .name = "32KHz AP",
+ .always_on = 1,
+ .state_mem = {
+ .enabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_32khz_ap_),
+ .consumer_supplies = max8997_32khz_ap_,
+};
+
+static struct regulator_init_data __initdata max8997_32khz_cp_data = {
+ .constraints = {
+ .name = "32KHz CP",
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data __initdata max8997_vichg_data = {
+ .constraints = {
+ .name = "VICHG",
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+};
+
+static struct regulator_init_data __initdata max8997_esafeout1_data = {
+ .constraints = {
+ .name = "SAFEOUT1",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_esafeout1_),
+ .consumer_supplies = max8997_esafeout1_,
+};
+
+static struct regulator_init_data __initdata max8997_esafeout2_data = {
+ .constraints = {
+ .name = "SAFEOUT2",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_esafeout2_),
+ .consumer_supplies = max8997_esafeout2_,
+};
+
+static struct regulator_init_data __initdata max8997_charger_cv_data = {
+ .constraints = {
+ .name = "CHARGER_CV",
+ .min_uV = 4200000,
+ .max_uV = 4200000,
+ .apply_uV = 1,
+ },
+};
+
+static struct regulator_init_data __initdata max8997_charger_data = {
+ .constraints = {
+ .name = "CHARGER",
+ .min_uA = 200000,
+ .max_uA = 950000,
+ .boot_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS |
+ REGULATOR_CHANGE_CURRENT,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_charger_),
+ .consumer_supplies = max8997_charger_,
+};
+
+static struct regulator_init_data __initdata max8997_charger_topoff_data = {
+ .constraints = {
+ .name = "CHARGER TOPOFF",
+ .min_uA = 50000,
+ .max_uA = 200000,
+ .valid_ops_mask = REGULATOR_CHANGE_CURRENT,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(max8997_chg_toff_),
+ .consumer_supplies = max8997_chg_toff_,
+};
+
+static struct max8997_regulator_data __initdata nuri_max8997_regulators[] = {
+ { MAX8997_LDO1, &max8997_ldo1_data },
+ { MAX8997_LDO2, &max8997_ldo2_data },
+ { MAX8997_LDO3, &max8997_ldo3_data },
+ { MAX8997_LDO4, &max8997_ldo4_data },
+ { MAX8997_LDO5, &max8997_ldo5_data },
+ { MAX8997_LDO6, &max8997_ldo6_data },
+ { MAX8997_LDO7, &max8997_ldo7_data },
+ { MAX8997_LDO8, &max8997_ldo8_data },
+ { MAX8997_LDO9, &max8997_ldo9_data },
+ { MAX8997_LDO10, &max8997_ldo10_data },
+ { MAX8997_LDO11, &max8997_ldo11_data },
+ { MAX8997_LDO12, &max8997_ldo12_data },
+ { MAX8997_LDO13, &max8997_ldo13_data },
+ { MAX8997_LDO14, &max8997_ldo14_data },
+ { MAX8997_LDO15, &max8997_ldo15_data },
+ { MAX8997_LDO16, &max8997_ldo16_data },
+
+ { MAX8997_LDO18, &max8997_ldo18_data },
+ { MAX8997_LDO21, &max8997_ldo21_data },
+
+ { MAX8997_BUCK1, &max8997_buck1_data },
+ { MAX8997_BUCK2, &max8997_buck2_data },
+ { MAX8997_BUCK3, &max8997_buck3_data },
+ { MAX8997_BUCK4, &max8997_buck4_data },
+ { MAX8997_BUCK5, &max8997_buck5_data },
+ { MAX8997_BUCK6, &max8997_buck6_data },
+ { MAX8997_BUCK7, &max8997_buck7_data },
+
+ { MAX8997_EN32KHZ_AP, &max8997_32khz_ap_data },
+ { MAX8997_EN32KHZ_CP, &max8997_32khz_cp_data },
+
+ { MAX8997_ENVICHG, &max8997_vichg_data },
+ { MAX8997_ESAFEOUT1, &max8997_esafeout1_data },
+ { MAX8997_ESAFEOUT2, &max8997_esafeout2_data },
+ { MAX8997_CHARGER_CV, &max8997_charger_cv_data },
+ { MAX8997_CHARGER, &max8997_charger_data },
+ { MAX8997_CHARGER_TOPOFF, &max8997_charger_topoff_data },
+};
+
+static struct max8997_platform_data __initdata nuri_max8997_pdata = {
+ .wakeup = 1,
+
+ .num_regulators = ARRAY_SIZE(nuri_max8997_regulators),
+ .regulators = nuri_max8997_regulators,
+
+ .buck125_gpios = { EXYNOS4_GPX0(5), EXYNOS4_GPX0(6), EXYNOS4_GPL0(0) },
+ .buck2_gpiodvs = true,
+
+ .buck1_voltage[0] = 1350000, /* 1.35V */
+ .buck1_voltage[1] = 1300000, /* 1.3V */
+ .buck1_voltage[2] = 1250000, /* 1.25V */
+ .buck1_voltage[3] = 1200000, /* 1.2V */
+ .buck1_voltage[4] = 1150000, /* 1.15V */
+ .buck1_voltage[5] = 1100000, /* 1.1V */
+ .buck1_voltage[6] = 1000000, /* 1.0V */
+ .buck1_voltage[7] = 950000, /* 0.95V */
+
+ .buck2_voltage[0] = 1100000, /* 1.1V */
+ .buck2_voltage[1] = 1000000, /* 1.0V */
+ .buck2_voltage[2] = 950000, /* 0.95V */
+ .buck2_voltage[3] = 900000, /* 0.9V */
+ .buck2_voltage[4] = 1100000, /* 1.1V */
+ .buck2_voltage[5] = 1000000, /* 1.0V */
+ .buck2_voltage[6] = 950000, /* 0.95V */
+ .buck2_voltage[7] = 900000, /* 0.9V */
+
+ .buck5_voltage[0] = 1200000, /* 1.2V */
+ .buck5_voltage[1] = 1200000, /* 1.2V */
+ .buck5_voltage[2] = 1200000, /* 1.2V */
+ .buck5_voltage[3] = 1200000, /* 1.2V */
+ .buck5_voltage[4] = 1200000, /* 1.2V */
+ .buck5_voltage[5] = 1200000, /* 1.2V */
+ .buck5_voltage[6] = 1200000, /* 1.2V */
+ .buck5_voltage[7] = 1200000, /* 1.2V */
+};
+
/* GPIO I2C 5 (PMIC) */
+enum { I2C5_MAX8997 };
static struct i2c_board_info i2c5_devs[] __initdata = {
- /* max8997, To be updated */
+ [I2C5_MAX8997] = {
+ I2C_BOARD_INFO("max8997", 0xCC >> 1),
+ .platform_data = &nuri_max8997_pdata,
+ },
+};
+
+static struct max17042_platform_data nuri_battery_platform_data = {
+};
+
+/* GPIO I2C 9 (Fuel Gauge) */
+static struct i2c_gpio_platform_data i2c9_gpio_data = {
+ .sda_pin = EXYNOS4_GPY4(0), /* XM0ADDR_8 */
+ .scl_pin = EXYNOS4_GPY4(1), /* XM0ADDR_9 */
+};
+static struct platform_device i2c9_gpio = {
+ .name = "i2c-gpio",
+ .id = 9,
+ .dev = {
+ .platform_data = &i2c9_gpio_data,
+ },
};
+enum { I2C9_MAX17042};
+static struct i2c_board_info i2c9_devs[] __initdata = {
+ [I2C9_MAX17042] = {
+ I2C_BOARD_INFO("max17042", 0x36),
+ .platform_data = &nuri_battery_platform_data,
+ },
+};
+
+/* MAX8903 Secondary Charger */
+static struct regulator_consumer_supply supplies_max8903[] = {
+ REGULATOR_SUPPLY("vinchg2", "charger-manager.0"),
+};
+
+static struct regulator_init_data max8903_charger_en_data = {
+ .constraints = {
+ .name = "VOUT_CHARGER",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .boot_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(supplies_max8903),
+ .consumer_supplies = supplies_max8903,
+};
+
+static struct fixed_voltage_config max8903_charger_en = {
+ .supply_name = "VOUT_CHARGER",
+ .microvolts = 5000000, /* Assume 5VDC */
+ .gpio = EXYNOS4_GPY4(5), /* TA_EN negaged */
+ .enable_high = 0, /* Enable = Low */
+ .enabled_at_boot = 1,
+ .init_data = &max8903_charger_en_data,
+};
+
+static struct platform_device max8903_fixed_reg_dev = {
+ .name = "reg-fixed-voltage",
+ .id = FIXED_REG_ID_MAX8903,
+ .dev = { .platform_data = &max8903_charger_en },
+};
+
+static struct max8903_pdata nuri_max8903 = {
+ /*
+ * cen: don't control with the driver, let it be
+ * controlled by regulator above
+ */
+ .dok = EXYNOS4_GPX1(4), /* TA_nCONNECTED */
+ /* uok, usus: not connected */
+ .chg = EXYNOS4_GPE2(0), /* TA_nCHG */
+ /* flt: vcc_1.8V_pda */
+ .dcm = EXYNOS4_GPL0(1), /* CURR_ADJ */
+
+ .dc_valid = true,
+ .usb_valid = false, /* USB is not wired to MAX8903 */
+};
+
+static struct platform_device nuri_max8903_device = {
+ .name = "max8903-charger",
+ .dev = {
+ .platform_data = &nuri_max8903,
+ },
+};
+
+static struct device *nuri_cm_devices[] = {
+ &s3c_device_i2c5.dev,
+ &s3c_device_adc.dev,
+ NULL, /* Reserved for UART */
+ NULL,
+};
+
+static void __init nuri_power_init(void)
+{
+ int gpio;
+ int irq_base = IRQ_GPIO_END + 1;
+ int ta_en = 0;
+
+ nuri_max8997_pdata.irq_base = irq_base;
+ irq_base += MAX8997_IRQ_NR;
+
+ gpio = EXYNOS4_GPX0(7);
+ gpio_request(gpio, "AP_PMIC_IRQ");
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+
+ gpio = EXYNOS4_GPX2(3);
+ gpio_request(gpio, "FUEL_ALERT");
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+
+ gpio = nuri_max8903.dok;
+ gpio_request(gpio, "TA_nCONNECTED");
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ ta_en = gpio_get_value(gpio) ? 0 : 1;
+
+ gpio = nuri_max8903.chg;
+ gpio_request(gpio, "TA_nCHG");
+ gpio_direction_input(gpio);
+
+ gpio = nuri_max8903.dcm;
+ gpio_request(gpio, "CURR_ADJ");
+ gpio_direction_output(gpio, ta_en);
+}
/* USB EHCI */
static struct s5p_ehci_platdata nuri_ehci_pdata;
static struct platform_device *nuri_devices[] __initdata = {
/* Samsung Platform Devices */
+ &s3c_device_i2c5, /* PMIC should initialize first */
&emmc_fixed_voltage,
&s3c_device_hsmmc0,
&s3c_device_hsmmc2,
&s3c_device_timer[0],
&s5p_device_ehci,
&s3c_device_i2c3,
+ &i2c9_gpio,
+ &s3c_device_adc,
+ &s3c_device_rtc,
+ &s5p_device_mfc,
+ &s5p_device_mfc_l,
+ &s5p_device_mfc_r,
+ &exynos4_device_pd[PD_MFC],
/* NURI Devices */
&nuri_gpio_keys,
&nuri_lcd_device,
&nuri_backlight_device,
+ &max8903_fixed_reg_dev,
+ &nuri_max8903_device,
};
static void __init nuri_map_io(void)
s3c24xx_init_uarts(nuri_uartcfgs, ARRAY_SIZE(nuri_uartcfgs));
}
+static void __init nuri_reserve(void)
+{
+ s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
+}
+
static void __init nuri_machine_init(void)
{
nuri_sdhci_init();
nuri_tsp_init();
+ nuri_power_init();
i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
s3c_i2c3_set_platdata(&i2c3_data);
i2c_register_board_info(3, i2c3_devs, ARRAY_SIZE(i2c3_devs));
+ s3c_i2c5_set_platdata(NULL);
+ i2c5_devs[I2C5_MAX8997].irq = gpio_to_irq(EXYNOS4_GPX0(7));
i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs));
+ i2c9_devs[I2C9_MAX17042].irq = gpio_to_irq(EXYNOS4_GPX2(3));
+ i2c_register_board_info(9, i2c9_devs, ARRAY_SIZE(i2c9_devs));
nuri_ehci_init();
clk_xusbxti.rate = 24000000;
/* Last */
platform_add_devices(nuri_devices, ARRAY_SIZE(nuri_devices));
+ s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev;
}
MACHINE_START(NURI, "NURI")
.map_io = nuri_map_io,
.init_machine = nuri_machine_init,
.timer = &exynos4_timer,
+ .reserve = &nuri_reserve,
MACHINE_END
*/
#include <linux/serial_core.h>
+#include <linux/delay.h>
#include <linux/gpio.h>
+#include <linux/lcd.h>
#include <linux/mmc/host.h>
#include <linux/platform_device.h>
#include <linux/smsc911x.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
+#include <video/platform_lcd.h>
+
#include <plat/regs-serial.h>
#include <plat/regs-srom.h>
+#include <plat/regs-fb-v4.h>
#include <plat/exynos4.h>
#include <plat/cpu.h>
#include <plat/devs.h>
+#include <plat/fb.h>
#include <plat/sdhci.h>
#include <plat/iic.h>
#include <plat/pd.h>
.clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
};
+static void lcd_lte480wv_set_power(struct plat_lcd_data *pd,
+ unsigned int power)
+{
+ if (power) {
+#if !defined(CONFIG_BACKLIGHT_PWM)
+ gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_HIGH, "GPD0");
+ gpio_free(EXYNOS4_GPD0(1));
+#endif
+ /* fire nRESET on power up */
+ gpio_request(EXYNOS4_GPX0(6), "GPX0");
+
+ gpio_direction_output(EXYNOS4_GPX0(6), 1);
+ mdelay(100);
+
+ gpio_set_value(EXYNOS4_GPX0(6), 0);
+ mdelay(10);
+
+ gpio_set_value(EXYNOS4_GPX0(6), 1);
+ mdelay(10);
+
+ gpio_free(EXYNOS4_GPX0(6));
+ } else {
+#if !defined(CONFIG_BACKLIGHT_PWM)
+ gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_LOW, "GPD0");
+ gpio_free(EXYNOS4_GPD0(1));
+#endif
+ }
+}
+
+static struct plat_lcd_data smdkc210_lcd_lte480wv_data = {
+ .set_power = lcd_lte480wv_set_power,
+};
+
+static struct platform_device smdkc210_lcd_lte480wv = {
+ .name = "platform-lcd",
+ .dev.parent = &s5p_device_fimd0.dev,
+ .dev.platform_data = &smdkc210_lcd_lte480wv_data,
+};
+
+static struct s3c_fb_pd_win smdkc210_fb_win0 = {
+ .win_mode = {
+ .left_margin = 13,
+ .right_margin = 8,
+ .upper_margin = 7,
+ .lower_margin = 5,
+ .hsync_len = 3,
+ .vsync_len = 1,
+ .xres = 800,
+ .yres = 480,
+ },
+ .max_bpp = 32,
+ .default_bpp = 24,
+};
+
+static struct s3c_fb_platdata smdkc210_lcd0_pdata __initdata = {
+ .win[0] = &smdkc210_fb_win0,
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+ .setup_gpio = exynos4_fimd0_gpio_setup_24bpp,
+};
+
static struct resource smdkc210_smsc911x_resources[] = {
[0] = {
.start = EXYNOS4_PA_SROM_BANK(1),
&exynos4_device_pd[PD_GPS],
&exynos4_device_sysmmu,
&samsung_asoc_dma,
+ &s5p_device_fimd0,
+ &smdkc210_lcd_lte480wv,
&smdkc210_smsc911x,
};
s3c_sdhci3_set_platdata(&smdkc210_hsmmc3_pdata);
samsung_bl_set(&smdkc210_bl_gpio_info, &smdkc210_bl_data);
+ s5p_fimd0_set_platdata(&smdkc210_lcd0_pdata);
platform_add_devices(smdkc210_devices, ARRAY_SIZE(smdkc210_devices));
}
&exynos4_device_pd[PD_CAM],
&exynos4_device_pd[PD_TV],
&exynos4_device_pd[PD_GPS],
+ &exynos4_device_spdif,
&exynos4_device_sysmmu,
&samsung_asoc_dma,
+ &samsung_asoc_idma,
&smdkv310_smsc911x,
+ &exynos4_device_ahci,
};
static void __init smdkv310_smsc911x_init(void)
#include <linux/regulator/fixed.h>
#include <linux/regulator/max8952.h>
#include <linux/mmc/host.h>
+#include <linux/i2c-gpio.h>
+#include <linux/i2c/mcs.h>
+#include <linux/i2c/atmel_mxt_ts.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
+#include <plat/mfc.h>
#include <plat/sdhci.h>
+#include <plat/pd.h>
#include <mach/map.h>
},
};
+/* I2C3 (TSP) */
+static struct mxt_platform_data qt602240_platform_data = {
+ .x_line = 19,
+ .y_line = 11,
+ .x_size = 800,
+ .y_size = 480,
+ .blen = 0x11,
+ .threshold = 0x28,
+ .voltage = 2800000, /* 2.8V */
+ .orient = MXT_DIAGONAL,
+};
+
+static struct i2c_board_info i2c3_devs[] __initdata = {
+ {
+ I2C_BOARD_INFO("qt602240_ts", 0x4a),
+ .platform_data = &qt602240_platform_data,
+ },
+};
+
+static void __init universal_tsp_init(void)
+{
+ int gpio;
+
+ /* TSP_LDO_ON: XMDMADDR_11 */
+ gpio = EXYNOS4_GPE2(3);
+ gpio_request(gpio, "TSP_LDO_ON");
+ gpio_direction_output(gpio, 1);
+ gpio_export(gpio, 0);
+
+ /* TSP_INT: XMDMADDR_7 */
+ gpio = EXYNOS4_GPE1(7);
+ gpio_request(gpio, "TSP_INT");
+
+ s5p_register_gpio_interrupt(gpio);
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
+ i2c3_devs[0].irq = gpio_to_irq(gpio);
+}
+
+
+/* GPIO I2C 12 (3 Touchkey) */
+static uint32_t touchkey_keymap[] = {
+ /* MCS_KEY_MAP(value, keycode) */
+ MCS_KEY_MAP(0, KEY_MENU), /* KEY_SEND */
+ MCS_KEY_MAP(1, KEY_BACK), /* KEY_END */
+};
+
+static struct mcs_platform_data touchkey_data = {
+ .keymap = touchkey_keymap,
+ .keymap_size = ARRAY_SIZE(touchkey_keymap),
+ .key_maxval = 2,
+};
+
+/* GPIO I2C 3_TOUCH 2.8V */
+#define I2C_GPIO_BUS_12 12
+static struct i2c_gpio_platform_data i2c_gpio12_data = {
+ .sda_pin = EXYNOS4_GPE4(0), /* XMDMDATA_8 */
+ .scl_pin = EXYNOS4_GPE4(1), /* XMDMDATA_9 */
+};
+
+static struct platform_device i2c_gpio12 = {
+ .name = "i2c-gpio",
+ .id = I2C_GPIO_BUS_12,
+ .dev = {
+ .platform_data = &i2c_gpio12_data,
+ },
+};
+
+static struct i2c_board_info i2c_gpio12_devs[] __initdata = {
+ {
+ I2C_BOARD_INFO("mcs5080_touchkey", 0x20),
+ .platform_data = &touchkey_data,
+ },
+};
+
+static void __init universal_touchkey_init(void)
+{
+ int gpio;
+
+ gpio = EXYNOS4_GPE3(7); /* XMDMDATA_7 */
+ gpio_request(gpio, "3_TOUCH_INT");
+ s5p_register_gpio_interrupt(gpio);
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
+ i2c_gpio12_devs[0].irq = gpio_to_irq(gpio);
+
+ gpio = EXYNOS4_GPE3(3); /* XMDMDATA_3 */
+ gpio_request(gpio, "3_TOUCH_EN");
+ gpio_direction_output(gpio, 1);
+}
+
/* GPIO KEYS */
static struct gpio_keys_button universal_gpio_keys_tables[] = {
{
static struct platform_device *universal_devices[] __initdata = {
/* Samsung Platform Devices */
+ &s5p_device_fimc0,
+ &s5p_device_fimc1,
+ &s5p_device_fimc2,
+ &s5p_device_fimc3,
&mmc0_fixed_voltage,
&s3c_device_hsmmc0,
&s3c_device_hsmmc2,
&s3c_device_hsmmc3,
+ &s3c_device_i2c3,
&s3c_device_i2c5,
/* Universal Devices */
+ &i2c_gpio12,
&universal_gpio_keys,
&s5p_device_onenand,
+ &s5p_device_mfc,
+ &s5p_device_mfc_l,
+ &s5p_device_mfc_r,
+ &exynos4_device_pd[PD_MFC],
};
static void __init universal_map_io(void)
s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs));
}
+static void __init universal_reserve(void)
+{
+ s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
+}
+
static void __init universal_machine_init(void)
{
universal_sdhci_init();
i2c_register_board_info(0, i2c0_devs, ARRAY_SIZE(i2c0_devs));
i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
+ universal_tsp_init();
+ s3c_i2c3_set_platdata(NULL);
+ i2c_register_board_info(3, i2c3_devs, ARRAY_SIZE(i2c3_devs));
+
s3c_i2c5_set_platdata(NULL);
i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs));
+ universal_touchkey_init();
+ i2c_register_board_info(I2C_GPIO_BUS_12, i2c_gpio12_devs,
+ ARRAY_SIZE(i2c_gpio12_devs));
+
/* Last */
platform_add_devices(universal_devices, ARRAY_SIZE(universal_devices));
+ s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev;
}
MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
.map_io = universal_map_io,
.init_machine = universal_machine_init,
.timer = &exynos4_timer,
+ .reserve = &universal_reserve,
MACHINE_END
setup_irq(IRQ_MCT_L0, &mct_tick0_event_irq);
} else {
mct_tick1_event_irq.dev_id = &mct_tick[cpu];
- irq_set_affinity(IRQ_MCT1, cpumask_of(1));
setup_irq(IRQ_MCT_L1, &mct_tick1_event_irq);
+ irq_set_affinity(IRQ_MCT_L1, cpumask_of(1));
}
}
#include <mach/hardware.h>
#include <mach/regs-clock.h>
+#include <mach/regs-pmu.h>
extern void exynos4_secondary_startup(void);
+#define CPU1_BOOT_REG S5P_VA_SYSRAM
+
/*
* control for which core is the next to come out of the secondary
* boot "holding pen"
static DEFINE_SPINLOCK(boot_lock);
+static void __cpuinit exynos4_gic_secondary_init(void)
+{
+ void __iomem *dist_base = S5P_VA_GIC_DIST +
+ (EXYNOS4_GIC_BANK_OFFSET * smp_processor_id());
+ void __iomem *cpu_base = S5P_VA_GIC_CPU +
+ (EXYNOS4_GIC_BANK_OFFSET * smp_processor_id());
+ int i;
+
+ /*
+ * Deal with the banked PPI and SGI interrupts - disable all
+ * PPI interrupts, ensure all SGI interrupts are enabled.
+ */
+ __raw_writel(0xffff0000, dist_base + GIC_DIST_ENABLE_CLEAR);
+ __raw_writel(0x0000ffff, dist_base + GIC_DIST_ENABLE_SET);
+
+ /*
+ * Set priority on PPI and SGI interrupts
+ */
+ for (i = 0; i < 32; i += 4)
+ __raw_writel(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4 / 4);
+
+ __raw_writel(0xf0, cpu_base + GIC_CPU_PRIMASK);
+ __raw_writel(1, cpu_base + GIC_CPU_CTRL);
+}
+
void __cpuinit platform_secondary_init(unsigned int cpu)
{
/*
* core (e.g. timer irq), then they will not have been enabled
* for us: do so
*/
- gic_secondary_init(0);
+ exynos4_gic_secondary_init();
/*
* let the primary processor know we're out of the
*/
write_pen_release(cpu);
+ if (!(__raw_readl(S5P_ARM_CORE1_STATUS) & S5P_CORE_LOCAL_PWR_EN)) {
+ __raw_writel(S5P_CORE_LOCAL_PWR_EN,
+ S5P_ARM_CORE1_CONFIGURATION);
+
+ timeout = 10;
+
+ /* wait max 10 ms until cpu1 is on */
+ while ((__raw_readl(S5P_ARM_CORE1_STATUS)
+ & S5P_CORE_LOCAL_PWR_EN) != S5P_CORE_LOCAL_PWR_EN) {
+ if (timeout-- == 0)
+ break;
+
+ mdelay(1);
+ }
+
+ if (timeout == 0) {
+ printk(KERN_ERR "cpu1 power enable failed");
+ spin_unlock(&boot_lock);
+ return -ETIMEDOUT;
+ }
+ }
/*
* Send the secondary CPU a soft interrupt, thereby causing
* the boot monitor to read the system wide flags register,
* and branch to the address found there.
*/
- gic_raise_softirq(cpumask_of(cpu), 1);
timeout = jiffies + (1 * HZ);
while (time_before(jiffies, timeout)) {
smp_rmb();
+
+ __raw_writel(BSYM(virt_to_phys(exynos4_secondary_startup)),
+ CPU1_BOOT_REG);
+ gic_raise_softirq(cpumask_of(cpu), 1);
+
if (pen_release == -1)
break;
#include <linux/suspend.h>
#include <linux/syscore_ops.h>
#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/clk.h>
#include <asm/cacheflush.h>
#include <asm/hardware/cache-l2x0.h>
#include <plat/cpu.h>
#include <plat/pm.h>
+#include <plat/pll.h>
+#include <plat/regs-srom.h>
#include <mach/regs-irq.h>
#include <mach/regs-gpio.h>
#include <mach/regs-clock.h>
#include <mach/regs-pmu.h>
#include <mach/pm-core.h>
-
-static struct sleep_save exynos4_sleep[] = {
- { .reg = S5P_ARM_CORE0_LOWPWR , .val = 0x2, },
- { .reg = S5P_DIS_IRQ_CORE0 , .val = 0x0, },
- { .reg = S5P_DIS_IRQ_CENTRAL0 , .val = 0x0, },
- { .reg = S5P_ARM_CORE1_LOWPWR , .val = 0x2, },
- { .reg = S5P_DIS_IRQ_CORE1 , .val = 0x0, },
- { .reg = S5P_DIS_IRQ_CENTRAL1 , .val = 0x0, },
- { .reg = S5P_ARM_COMMON_LOWPWR , .val = 0x2, },
- { .reg = S5P_L2_0_LOWPWR , .val = 0x3, },
- { .reg = S5P_L2_1_LOWPWR , .val = 0x3, },
- { .reg = S5P_CMU_ACLKSTOP_LOWPWR , .val = 0x0, },
- { .reg = S5P_CMU_SCLKSTOP_LOWPWR , .val = 0x0, },
- { .reg = S5P_CMU_RESET_LOWPWR , .val = 0x0, },
- { .reg = S5P_APLL_SYSCLK_LOWPWR , .val = 0x0, },
- { .reg = S5P_MPLL_SYSCLK_LOWPWR , .val = 0x0, },
- { .reg = S5P_VPLL_SYSCLK_LOWPWR , .val = 0x0, },
- { .reg = S5P_EPLL_SYSCLK_LOWPWR , .val = 0x0, },
- { .reg = S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR , .val = 0x0, },
- { .reg = S5P_CMU_RESET_GPSALIVE_LOWPWR , .val = 0x0, },
- { .reg = S5P_CMU_CLKSTOP_CAM_LOWPWR , .val = 0x0, },
- { .reg = S5P_CMU_CLKSTOP_TV_LOWPWR , .val = 0x0, },
- { .reg = S5P_CMU_CLKSTOP_MFC_LOWPWR , .val = 0x0, },
- { .reg = S5P_CMU_CLKSTOP_G3D_LOWPWR , .val = 0x0, },
- { .reg = S5P_CMU_CLKSTOP_LCD0_LOWPWR , .val = 0x0, },
- { .reg = S5P_CMU_CLKSTOP_LCD1_LOWPWR , .val = 0x0, },
- { .reg = S5P_CMU_CLKSTOP_MAUDIO_LOWPWR , .val = 0x0, },
- { .reg = S5P_CMU_CLKSTOP_GPS_LOWPWR , .val = 0x0, },
- { .reg = S5P_CMU_RESET_CAM_LOWPWR , .val = 0x0, },
- { .reg = S5P_CMU_RESET_TV_LOWPWR , .val = 0x0, },
- { .reg = S5P_CMU_RESET_MFC_LOWPWR , .val = 0x0, },
- { .reg = S5P_CMU_RESET_G3D_LOWPWR , .val = 0x0, },
- { .reg = S5P_CMU_RESET_LCD0_LOWPWR , .val = 0x0, },
- { .reg = S5P_CMU_RESET_LCD1_LOWPWR , .val = 0x0, },
- { .reg = S5P_CMU_RESET_MAUDIO_LOWPWR , .val = 0x0, },
- { .reg = S5P_CMU_RESET_GPS_LOWPWR , .val = 0x0, },
- { .reg = S5P_TOP_BUS_LOWPWR , .val = 0x0, },
- { .reg = S5P_TOP_RETENTION_LOWPWR , .val = 0x1, },
- { .reg = S5P_TOP_PWR_LOWPWR , .val = 0x3, },
- { .reg = S5P_LOGIC_RESET_LOWPWR , .val = 0x0, },
- { .reg = S5P_ONENAND_MEM_LOWPWR , .val = 0x0, },
- { .reg = S5P_MODIMIF_MEM_LOWPWR , .val = 0x0, },
- { .reg = S5P_G2D_ACP_MEM_LOWPWR , .val = 0x0, },
- { .reg = S5P_USBOTG_MEM_LOWPWR , .val = 0x0, },
- { .reg = S5P_HSMMC_MEM_LOWPWR , .val = 0x0, },
- { .reg = S5P_CSSYS_MEM_LOWPWR , .val = 0x0, },
- { .reg = S5P_SECSS_MEM_LOWPWR , .val = 0x0, },
- { .reg = S5P_PCIE_MEM_LOWPWR , .val = 0x0, },
- { .reg = S5P_SATA_MEM_LOWPWR , .val = 0x0, },
- { .reg = S5P_PAD_RETENTION_DRAM_LOWPWR , .val = 0x0, },
- { .reg = S5P_PAD_RETENTION_MAUDIO_LOWPWR , .val = 0x0, },
- { .reg = S5P_PAD_RETENTION_GPIO_LOWPWR , .val = 0x0, },
- { .reg = S5P_PAD_RETENTION_UART_LOWPWR , .val = 0x0, },
- { .reg = S5P_PAD_RETENTION_MMCA_LOWPWR , .val = 0x0, },
- { .reg = S5P_PAD_RETENTION_MMCB_LOWPWR , .val = 0x0, },
- { .reg = S5P_PAD_RETENTION_EBIA_LOWPWR , .val = 0x0, },
- { .reg = S5P_PAD_RETENTION_EBIB_LOWPWR , .val = 0x0, },
- { .reg = S5P_PAD_RETENTION_ISOLATION_LOWPWR , .val = 0x0, },
- { .reg = S5P_PAD_RETENTION_ALV_SEL_LOWPWR , .val = 0x0, },
- { .reg = S5P_XUSBXTI_LOWPWR , .val = 0x0, },
- { .reg = S5P_XXTI_LOWPWR , .val = 0x0, },
- { .reg = S5P_EXT_REGULATOR_LOWPWR , .val = 0x0, },
- { .reg = S5P_GPIO_MODE_LOWPWR , .val = 0x0, },
- { .reg = S5P_GPIO_MODE_MAUDIO_LOWPWR , .val = 0x0, },
- { .reg = S5P_CAM_LOWPWR , .val = 0x0, },
- { .reg = S5P_TV_LOWPWR , .val = 0x0, },
- { .reg = S5P_MFC_LOWPWR , .val = 0x0, },
- { .reg = S5P_G3D_LOWPWR , .val = 0x0, },
- { .reg = S5P_LCD0_LOWPWR , .val = 0x0, },
- { .reg = S5P_LCD1_LOWPWR , .val = 0x0, },
- { .reg = S5P_MAUDIO_LOWPWR , .val = 0x0, },
- { .reg = S5P_GPS_LOWPWR , .val = 0x0, },
- { .reg = S5P_GPS_ALIVE_LOWPWR , .val = 0x0, },
-};
+#include <mach/pmu.h>
static struct sleep_save exynos4_set_clksrc[] = {
{ .reg = S5P_CLKSRC_MASK_TOP , .val = 0x00000001, },
{ .reg = S5P_CLKSRC_MASK_DMC , .val = 0x00010000, },
};
+static struct sleep_save exynos4_epll_save[] = {
+ SAVE_ITEM(S5P_EPLL_CON0),
+ SAVE_ITEM(S5P_EPLL_CON1),
+};
+
+static struct sleep_save exynos4_vpll_save[] = {
+ SAVE_ITEM(S5P_VPLL_CON0),
+ SAVE_ITEM(S5P_VPLL_CON1),
+};
+
static struct sleep_save exynos4_core_save[] = {
/* CMU side */
SAVE_ITEM(S5P_CLKDIV_LEFTBUS),
SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS),
SAVE_ITEM(S5P_CLKDIV_RIGHTBUS),
SAVE_ITEM(S5P_CLKGATE_IP_RIGHTBUS),
- SAVE_ITEM(S5P_EPLL_CON0),
- SAVE_ITEM(S5P_EPLL_CON1),
- SAVE_ITEM(S5P_VPLL_CON0),
- SAVE_ITEM(S5P_VPLL_CON1),
SAVE_ITEM(S5P_CLKSRC_TOP0),
SAVE_ITEM(S5P_CLKSRC_TOP1),
SAVE_ITEM(S5P_CLKSRC_CAM),
+ SAVE_ITEM(S5P_CLKSRC_TV),
SAVE_ITEM(S5P_CLKSRC_MFC),
+ SAVE_ITEM(S5P_CLKSRC_G3D),
SAVE_ITEM(S5P_CLKSRC_IMAGE),
SAVE_ITEM(S5P_CLKSRC_LCD0),
SAVE_ITEM(S5P_CLKSRC_LCD1),
SAVE_ITEM(S5P_CLKDIV_PERIL4),
SAVE_ITEM(S5P_CLKDIV_PERIL5),
SAVE_ITEM(S5P_CLKDIV_TOP),
+ SAVE_ITEM(S5P_CLKSRC_MASK_TOP),
SAVE_ITEM(S5P_CLKSRC_MASK_CAM),
SAVE_ITEM(S5P_CLKSRC_MASK_TV),
SAVE_ITEM(S5P_CLKSRC_MASK_LCD0),
SAVE_ITEM(S5P_CLKSRC_MASK_FSYS),
SAVE_ITEM(S5P_CLKSRC_MASK_PERIL0),
SAVE_ITEM(S5P_CLKSRC_MASK_PERIL1),
+ SAVE_ITEM(S5P_CLKDIV2_RATIO),
SAVE_ITEM(S5P_CLKGATE_SCLKCAM),
SAVE_ITEM(S5P_CLKGATE_IP_CAM),
SAVE_ITEM(S5P_CLKGATE_IP_TV),
SAVE_ITEM(S5P_CLKGATE_IP_DMC),
SAVE_ITEM(S5P_CLKSRC_CPU),
SAVE_ITEM(S5P_CLKDIV_CPU),
+ SAVE_ITEM(S5P_CLKDIV_CPU + 0x4),
SAVE_ITEM(S5P_CLKGATE_SCLKCPU),
SAVE_ITEM(S5P_CLKGATE_IP_CPU),
+
/* GIC side */
SAVE_ITEM(S5P_VA_GIC_CPU + 0x000),
SAVE_ITEM(S5P_VA_GIC_CPU + 0x004),
SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x070),
SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x080),
SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x090),
+
+ /* SROM side */
+ SAVE_ITEM(S5P_SROM_BW),
+ SAVE_ITEM(S5P_SROM_BC0),
+ SAVE_ITEM(S5P_SROM_BC1),
+ SAVE_ITEM(S5P_SROM_BC2),
+ SAVE_ITEM(S5P_SROM_BC3),
};
static struct sleep_save exynos4_l2cc_save[] = {
SAVE_ITEM(S5P_VA_L2CC + L2X0_AUX_CTRL),
};
+/* For Cortex-A9 Diagnostic and Power control register */
+static unsigned int save_arm_register[2];
+
static int exynos4_cpu_suspend(unsigned long arg)
{
- unsigned long tmp;
- unsigned long mask = 0xFFFFFFFF;
-
- /* Setting Central Sequence Register for power down mode */
-
- tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
- tmp &= ~(S5P_CENTRAL_LOWPWR_CFG);
- __raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
-
- /* Setting Central Sequence option Register */
-
- tmp = __raw_readl(S5P_CENTRAL_SEQ_OPTION);
- tmp &= ~(S5P_USE_MASK);
- tmp |= S5P_USE_STANDBY_WFI0;
- __raw_writel(tmp, S5P_CENTRAL_SEQ_OPTION);
-
- /* Clear all interrupt pending to avoid early wakeup */
-
- __raw_writel(mask, (S5P_VA_GIC_DIST + 0x280));
- __raw_writel(mask, (S5P_VA_GIC_DIST + 0x284));
- __raw_writel(mask, (S5P_VA_GIC_DIST + 0x288));
-
- /* Disable all interrupt */
-
- __raw_writel(0x0, (S5P_VA_GIC_CPU + 0x000));
- __raw_writel(0x0, (S5P_VA_GIC_DIST + 0x000));
- __raw_writel(mask, (S5P_VA_GIC_DIST + 0x184));
- __raw_writel(mask, (S5P_VA_GIC_DIST + 0x188));
-
outer_flush_all();
/* issue the standby signal into the pm unit. */
s3c_pm_do_save(exynos4_core_save, ARRAY_SIZE(exynos4_core_save));
s3c_pm_do_save(exynos4_l2cc_save, ARRAY_SIZE(exynos4_l2cc_save));
+ s3c_pm_do_save(exynos4_epll_save, ARRAY_SIZE(exynos4_epll_save));
+ s3c_pm_do_save(exynos4_vpll_save, ARRAY_SIZE(exynos4_vpll_save));
tmp = __raw_readl(S5P_INFORM1);
/* Set value of power down register for sleep mode */
- s3c_pm_do_restore_core(exynos4_sleep, ARRAY_SIZE(exynos4_sleep));
+ exynos4_sys_powerdown_conf(SYS_SLEEP);
__raw_writel(S5P_CHECK_SLEEP, S5P_INFORM1);
/* ensure at least INFORM0 has the resume address */
flush_cache_all();
}
+static unsigned long pll_base_rate;
+
+static void exynos4_restore_pll(void)
+{
+ unsigned long pll_con, locktime, lockcnt;
+ unsigned long pll_in_rate;
+ unsigned int p_div, epll_wait = 0, vpll_wait = 0;
+
+ if (pll_base_rate == 0)
+ return;
+
+ pll_in_rate = pll_base_rate;
+
+ /* EPLL */
+ pll_con = exynos4_epll_save[0].val;
+
+ if (pll_con & (1 << 31)) {
+ pll_con &= (PLL46XX_PDIV_MASK << PLL46XX_PDIV_SHIFT);
+ p_div = (pll_con >> PLL46XX_PDIV_SHIFT);
+
+ pll_in_rate /= 1000000;
+
+ locktime = (3000 / pll_in_rate) * p_div;
+ lockcnt = locktime * 10000 / (10000 / pll_in_rate);
+
+ __raw_writel(lockcnt, S5P_EPLL_LOCK);
+
+ s3c_pm_do_restore_core(exynos4_epll_save,
+ ARRAY_SIZE(exynos4_epll_save));
+ epll_wait = 1;
+ }
+
+ pll_in_rate = pll_base_rate;
+
+ /* VPLL */
+ pll_con = exynos4_vpll_save[0].val;
+
+ if (pll_con & (1 << 31)) {
+ pll_in_rate /= 1000000;
+ /* 750us */
+ locktime = 750;
+ lockcnt = locktime * 10000 / (10000 / pll_in_rate);
+
+ __raw_writel(lockcnt, S5P_VPLL_LOCK);
+
+ s3c_pm_do_restore_core(exynos4_vpll_save,
+ ARRAY_SIZE(exynos4_vpll_save));
+ vpll_wait = 1;
+ }
+
+ /* Wait PLL locking */
+
+ do {
+ if (epll_wait) {
+ pll_con = __raw_readl(S5P_EPLL_CON0);
+ if (pll_con & (1 << S5P_EPLLCON0_LOCKED_SHIFT))
+ epll_wait = 0;
+ }
+
+ if (vpll_wait) {
+ pll_con = __raw_readl(S5P_VPLL_CON0);
+ if (pll_con & (1 << S5P_VPLLCON0_LOCKED_SHIFT))
+ vpll_wait = 0;
+ }
+ } while (epll_wait || vpll_wait);
+}
+
static struct sysdev_driver exynos4_pm_driver = {
.add = exynos4_pm_add,
};
static __init int exynos4_pm_drvinit(void)
{
+ struct clk *pll_base;
unsigned int tmp;
s3c_pm_init();
tmp |= ((0xFF << 8) | (0x1F << 1));
__raw_writel(tmp, S5P_WAKEUP_MASK);
+ pll_base = clk_get(NULL, "xtal");
+
+ if (!IS_ERR(pll_base)) {
+ pll_base_rate = clk_get_rate(pll_base);
+ clk_put(pll_base);
+ }
+
return sysdev_driver_register(&exynos4_sysclass, &exynos4_pm_driver);
}
arch_initcall(exynos4_pm_drvinit);
+static int exynos4_pm_suspend(void)
+{
+ unsigned long tmp;
+
+ /* Setting Central Sequence Register for power down mode */
+
+ tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
+ tmp &= ~S5P_CENTRAL_LOWPWR_CFG;
+ __raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
+
+ /* Save Power control register */
+ asm ("mrc p15, 0, %0, c15, c0, 0"
+ : "=r" (tmp) : : "cc");
+ save_arm_register[0] = tmp;
+
+ /* Save Diagnostic register */
+ asm ("mrc p15, 0, %0, c15, c0, 1"
+ : "=r" (tmp) : : "cc");
+ save_arm_register[1] = tmp;
+
+ return 0;
+}
+
static void exynos4_pm_resume(void)
{
+ unsigned long tmp;
+
+ /*
+ * If PMU failed while entering sleep mode, WFI will be
+ * ignored by PMU and then exiting cpu_do_idle().
+ * S5P_CENTRAL_LOWPWR_CFG bit will not be set automatically
+ * in this situation.
+ */
+ tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
+ if (!(tmp & S5P_CENTRAL_LOWPWR_CFG)) {
+ tmp |= S5P_CENTRAL_LOWPWR_CFG;
+ __raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
+ /* No need to perform below restore code */
+ goto early_wakeup;
+ }
+ /* Restore Power control register */
+ tmp = save_arm_register[0];
+ asm volatile ("mcr p15, 0, %0, c15, c0, 0"
+ : : "r" (tmp)
+ : "cc");
+
+ /* Restore Diagnostic register */
+ tmp = save_arm_register[1];
+ asm volatile ("mcr p15, 0, %0, c15, c0, 1"
+ : : "r" (tmp)
+ : "cc");
+
/* For release retention */
__raw_writel((1 << 28), S5P_PAD_RET_MAUDIO_OPTION);
s3c_pm_do_restore_core(exynos4_core_save, ARRAY_SIZE(exynos4_core_save));
+ exynos4_restore_pll();
+
exynos4_scu_enable(S5P_VA_SCU);
#ifdef CONFIG_CACHE_L2X0
/* enable L2X0*/
writel_relaxed(1, S5P_VA_L2CC + L2X0_CTRL);
#endif
+
+early_wakeup:
+ return;
}
static struct syscore_ops exynos4_pm_syscore_ops = {
+ .suspend = exynos4_pm_suspend,
.resume = exynos4_pm_resume,
};
--- /dev/null
+/* linux/arch/arm/mach-exynos4/pmu.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * EXYNOS4210 - CPU PMU(Power Management Unit) support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/io.h>
+#include <linux/kernel.h>
+
+#include <mach/regs-clock.h>
+#include <mach/pmu.h>
+
+static void __iomem *sys_powerdown_reg[] = {
+ S5P_ARM_CORE0_LOWPWR,
+ S5P_DIS_IRQ_CORE0,
+ S5P_DIS_IRQ_CENTRAL0,
+ S5P_ARM_CORE1_LOWPWR,
+ S5P_DIS_IRQ_CORE1,
+ S5P_DIS_IRQ_CENTRAL1,
+ S5P_ARM_COMMON_LOWPWR,
+ S5P_L2_0_LOWPWR,
+ S5P_L2_1_LOWPWR,
+ S5P_CMU_ACLKSTOP_LOWPWR,
+ S5P_CMU_SCLKSTOP_LOWPWR,
+ S5P_CMU_RESET_LOWPWR,
+ S5P_APLL_SYSCLK_LOWPWR,
+ S5P_MPLL_SYSCLK_LOWPWR,
+ S5P_VPLL_SYSCLK_LOWPWR,
+ S5P_EPLL_SYSCLK_LOWPWR,
+ S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR,
+ S5P_CMU_RESET_GPSALIVE_LOWPWR,
+ S5P_CMU_CLKSTOP_CAM_LOWPWR,
+ S5P_CMU_CLKSTOP_TV_LOWPWR,
+ S5P_CMU_CLKSTOP_MFC_LOWPWR,
+ S5P_CMU_CLKSTOP_G3D_LOWPWR,
+ S5P_CMU_CLKSTOP_LCD0_LOWPWR,
+ S5P_CMU_CLKSTOP_LCD1_LOWPWR,
+ S5P_CMU_CLKSTOP_MAUDIO_LOWPWR,
+ S5P_CMU_CLKSTOP_GPS_LOWPWR,
+ S5P_CMU_RESET_CAM_LOWPWR,
+ S5P_CMU_RESET_TV_LOWPWR,
+ S5P_CMU_RESET_MFC_LOWPWR,
+ S5P_CMU_RESET_G3D_LOWPWR,
+ S5P_CMU_RESET_LCD0_LOWPWR,
+ S5P_CMU_RESET_LCD1_LOWPWR,
+ S5P_CMU_RESET_MAUDIO_LOWPWR,
+ S5P_CMU_RESET_GPS_LOWPWR,
+ S5P_TOP_BUS_LOWPWR,
+ S5P_TOP_RETENTION_LOWPWR,
+ S5P_TOP_PWR_LOWPWR,
+ S5P_LOGIC_RESET_LOWPWR,
+ S5P_ONENAND_MEM_LOWPWR,
+ S5P_MODIMIF_MEM_LOWPWR,
+ S5P_G2D_ACP_MEM_LOWPWR,
+ S5P_USBOTG_MEM_LOWPWR,
+ S5P_HSMMC_MEM_LOWPWR,
+ S5P_CSSYS_MEM_LOWPWR,
+ S5P_SECSS_MEM_LOWPWR,
+ S5P_PCIE_MEM_LOWPWR,
+ S5P_SATA_MEM_LOWPWR,
+ S5P_PAD_RETENTION_DRAM_LOWPWR,
+ S5P_PAD_RETENTION_MAUDIO_LOWPWR,
+ S5P_PAD_RETENTION_GPIO_LOWPWR,
+ S5P_PAD_RETENTION_UART_LOWPWR,
+ S5P_PAD_RETENTION_MMCA_LOWPWR,
+ S5P_PAD_RETENTION_MMCB_LOWPWR,
+ S5P_PAD_RETENTION_EBIA_LOWPWR,
+ S5P_PAD_RETENTION_EBIB_LOWPWR,
+ S5P_PAD_RETENTION_ISOLATION_LOWPWR,
+ S5P_PAD_RETENTION_ALV_SEL_LOWPWR,
+ S5P_XUSBXTI_LOWPWR,
+ S5P_XXTI_LOWPWR,
+ S5P_EXT_REGULATOR_LOWPWR,
+ S5P_GPIO_MODE_LOWPWR,
+ S5P_GPIO_MODE_MAUDIO_LOWPWR,
+ S5P_CAM_LOWPWR,
+ S5P_TV_LOWPWR,
+ S5P_MFC_LOWPWR,
+ S5P_G3D_LOWPWR,
+ S5P_LCD0_LOWPWR,
+ S5P_LCD1_LOWPWR,
+ S5P_MAUDIO_LOWPWR,
+ S5P_GPS_LOWPWR,
+ S5P_GPS_ALIVE_LOWPWR,
+};
+
+static const unsigned int sys_powerdown_val[][NUM_SYS_POWERDOWN] = {
+ /* { AFTR, LPA, SLEEP }*/
+ { 0, 0, 2 }, /* ARM_CORE0 */
+ { 0, 0, 0 }, /* ARM_DIS_IRQ_CORE0 */
+ { 0, 0, 0 }, /* ARM_DIS_IRQ_CENTRAL0 */
+ { 0, 0, 2 }, /* ARM_CORE1 */
+ { 0, 0, 0 }, /* ARM_DIS_IRQ_CORE1 */
+ { 0, 0, 0 }, /* ARM_DIS_IRQ_CENTRAL1 */
+ { 0, 0, 2 }, /* ARM_COMMON */
+ { 2, 2, 3 }, /* ARM_CPU_L2_0 */
+ { 2, 2, 3 }, /* ARM_CPU_L2_1 */
+ { 1, 0, 0 }, /* CMU_ACLKSTOP */
+ { 1, 0, 0 }, /* CMU_SCLKSTOP */
+ { 1, 1, 0 }, /* CMU_RESET */
+ { 1, 0, 0 }, /* APLL_SYSCLK */
+ { 1, 0, 0 }, /* MPLL_SYSCLK */
+ { 1, 0, 0 }, /* VPLL_SYSCLK */
+ { 1, 1, 0 }, /* EPLL_SYSCLK */
+ { 1, 1, 0 }, /* CMU_CLKSTOP_GPS_ALIVE */
+ { 1, 1, 0 }, /* CMU_RESET_GPS_ALIVE */
+ { 1, 1, 0 }, /* CMU_CLKSTOP_CAM */
+ { 1, 1, 0 }, /* CMU_CLKSTOP_TV */
+ { 1, 1, 0 }, /* CMU_CLKSTOP_MFC */
+ { 1, 1, 0 }, /* CMU_CLKSTOP_G3D */
+ { 1, 1, 0 }, /* CMU_CLKSTOP_LCD0 */
+ { 1, 1, 0 }, /* CMU_CLKSTOP_LCD1 */
+ { 1, 1, 0 }, /* CMU_CLKSTOP_MAUDIO */
+ { 1, 1, 0 }, /* CMU_CLKSTOP_GPS */
+ { 1, 1, 0 }, /* CMU_RESET_CAM */
+ { 1, 1, 0 }, /* CMU_RESET_TV */
+ { 1, 1, 0 }, /* CMU_RESET_MFC */
+ { 1, 1, 0 }, /* CMU_RESET_G3D */
+ { 1, 1, 0 }, /* CMU_RESET_LCD0 */
+ { 1, 1, 0 }, /* CMU_RESET_LCD1 */
+ { 1, 1, 0 }, /* CMU_RESET_MAUDIO */
+ { 1, 1, 0 }, /* CMU_RESET_GPS */
+ { 3, 0, 0 }, /* TOP_BUS */
+ { 1, 0, 1 }, /* TOP_RETENTION */
+ { 3, 0, 3 }, /* TOP_PWR */
+ { 1, 1, 0 }, /* LOGIC_RESET */
+ { 3, 0, 0 }, /* ONENAND_MEM */
+ { 3, 0, 0 }, /* MODIMIF_MEM */
+ { 3, 0, 0 }, /* G2D_ACP_MEM */
+ { 3, 0, 0 }, /* USBOTG_MEM */
+ { 3, 0, 0 }, /* HSMMC_MEM */
+ { 3, 0, 0 }, /* CSSYS_MEM */
+ { 3, 0, 0 }, /* SECSS_MEM */
+ { 3, 0, 0 }, /* PCIE_MEM */
+ { 3, 0, 0 }, /* SATA_MEM */
+ { 1, 0, 0 }, /* PAD_RETENTION_DRAM */
+ { 1, 1, 0 }, /* PAD_RETENTION_MAUDIO */
+ { 1, 0, 0 }, /* PAD_RETENTION_GPIO */
+ { 1, 0, 0 }, /* PAD_RETENTION_UART */
+ { 1, 0, 0 }, /* PAD_RETENTION_MMCA */
+ { 1, 0, 0 }, /* PAD_RETENTION_MMCB */
+ { 1, 0, 0 }, /* PAD_RETENTION_EBIA */
+ { 1, 0, 0 }, /* PAD_RETENTION_EBIB */
+ { 1, 0, 0 }, /* PAD_RETENTION_ISOLATION */
+ { 1, 0, 0 }, /* PAD_RETENTION_ALV_SEL */
+ { 1, 1, 0 }, /* XUSBXTI */
+ { 1, 1, 0 }, /* XXTI */
+ { 1, 1, 0 }, /* EXT_REGULATOR */
+ { 1, 0, 0 }, /* GPIO_MODE */
+ { 1, 1, 0 }, /* GPIO_MODE_MAUDIO */
+ { 7, 0, 0 }, /* CAM */
+ { 7, 0, 0 }, /* TV */
+ { 7, 0, 0 }, /* MFC */
+ { 7, 0, 0 }, /* G3D */
+ { 7, 0, 0 }, /* LCD0 */
+ { 7, 0, 0 }, /* LCD1 */
+ { 7, 7, 0 }, /* MAUDIO */
+ { 7, 0, 0 }, /* GPS */
+ { 7, 0, 0 }, /* GPS_ALIVE */
+};
+
+void exynos4_sys_powerdown_conf(enum sys_powerdown mode)
+{
+ unsigned int count = ARRAY_SIZE(sys_powerdown_reg);
+
+ for (; count > 0; count--)
+ __raw_writel(sys_powerdown_val[count - 1][mode],
+ sys_powerdown_reg[count - 1]);
+}
--- /dev/null
+/* linux/arch/arm/mach-exynos4/setup-fimd0.c
+ *
+ * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Base Exynos4 FIMD 0 configuration
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/fb.h>
+#include <linux/gpio.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/regs-fb-v4.h>
+
+#include <mach/map.h>
+
+void exynos4_fimd0_gpio_setup_24bpp(void)
+{
+ unsigned int reg;
+
+ s3c_gpio_cfgrange_nopull(EXYNOS4_GPF0(0), 8, S3C_GPIO_SFN(2));
+ s3c_gpio_cfgrange_nopull(EXYNOS4_GPF1(0), 8, S3C_GPIO_SFN(2));
+ s3c_gpio_cfgrange_nopull(EXYNOS4_GPF2(0), 8, S3C_GPIO_SFN(2));
+ s3c_gpio_cfgrange_nopull(EXYNOS4_GPF3(0), 4, S3C_GPIO_SFN(2));
+
+ /*
+ * Set DISPLAY_CONTROL register for Display path selection.
+ *
+ * DISPLAY_CONTROL[1:0]
+ * ---------------------
+ * 00 | MIE
+ * 01 | MDINE
+ * 10 | FIMD : selected
+ * 11 | FIMD
+ */
+ reg = __raw_readl(S3C_VA_SYS + 0x0210);
+ reg |= (1 << 1);
+ __raw_writel(reg, S3C_VA_SYS + 0x0210);
+}
+++ /dev/null
-/* linux/arch/arm/mach-exynos4/time.c
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4 (and compatible) HRT support
- * PWM 2/4 is used for this feature
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/clockchips.h>
-#include <linux/platform_device.h>
-
-#include <asm/smp_twd.h>
-
-#include <mach/map.h>
-#include <plat/regs-timer.h>
-#include <asm/mach/time.h>
-
-static unsigned long clock_count_per_tick;
-
-static struct clk *tin2;
-static struct clk *tin4;
-static struct clk *tdiv2;
-static struct clk *tdiv4;
-static struct clk *timerclk;
-
-static void exynos4_pwm_stop(unsigned int pwm_id)
-{
- unsigned long tcon;
-
- tcon = __raw_readl(S3C2410_TCON);
-
- switch (pwm_id) {
- case 2:
- tcon &= ~S3C2410_TCON_T2START;
- break;
- case 4:
- tcon &= ~S3C2410_TCON_T4START;
- break;
- default:
- break;
- }
- __raw_writel(tcon, S3C2410_TCON);
-}
-
-static void exynos4_pwm_init(unsigned int pwm_id, unsigned long tcnt)
-{
- unsigned long tcon;
-
- tcon = __raw_readl(S3C2410_TCON);
-
- /* timers reload after counting zero, so reduce the count by 1 */
- tcnt--;
-
- /* ensure timer is stopped... */
- switch (pwm_id) {
- case 2:
- tcon &= ~(0xf<<12);
- tcon |= S3C2410_TCON_T2MANUALUPD;
-
- __raw_writel(tcnt, S3C2410_TCNTB(2));
- __raw_writel(tcnt, S3C2410_TCMPB(2));
- __raw_writel(tcon, S3C2410_TCON);
-
- break;
- case 4:
- tcon &= ~(7<<20);
- tcon |= S3C2410_TCON_T4MANUALUPD;
-
- __raw_writel(tcnt, S3C2410_TCNTB(4));
- __raw_writel(tcnt, S3C2410_TCMPB(4));
- __raw_writel(tcon, S3C2410_TCON);
-
- break;
- default:
- break;
- }
-}
-
-static inline void exynos4_pwm_start(unsigned int pwm_id, bool periodic)
-{
- unsigned long tcon;
-
- tcon = __raw_readl(S3C2410_TCON);
-
- switch (pwm_id) {
- case 2:
- tcon |= S3C2410_TCON_T2START;
- tcon &= ~S3C2410_TCON_T2MANUALUPD;
-
- if (periodic)
- tcon |= S3C2410_TCON_T2RELOAD;
- else
- tcon &= ~S3C2410_TCON_T2RELOAD;
- break;
- case 4:
- tcon |= S3C2410_TCON_T4START;
- tcon &= ~S3C2410_TCON_T4MANUALUPD;
-
- if (periodic)
- tcon |= S3C2410_TCON_T4RELOAD;
- else
- tcon &= ~S3C2410_TCON_T4RELOAD;
- break;
- default:
- break;
- }
- __raw_writel(tcon, S3C2410_TCON);
-}
-
-static int exynos4_pwm_set_next_event(unsigned long cycles,
- struct clock_event_device *evt)
-{
- exynos4_pwm_init(2, cycles);
- exynos4_pwm_start(2, 0);
- return 0;
-}
-
-static void exynos4_pwm_set_mode(enum clock_event_mode mode,
- struct clock_event_device *evt)
-{
- exynos4_pwm_stop(2);
-
- switch (mode) {
- case CLOCK_EVT_MODE_PERIODIC:
- exynos4_pwm_init(2, clock_count_per_tick);
- exynos4_pwm_start(2, 1);
- break;
- case CLOCK_EVT_MODE_ONESHOT:
- break;
- case CLOCK_EVT_MODE_UNUSED:
- case CLOCK_EVT_MODE_SHUTDOWN:
- case CLOCK_EVT_MODE_RESUME:
- break;
- }
-}
-
-static struct clock_event_device pwm_event_device = {
- .name = "pwm_timer2",
- .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
- .rating = 200,
- .shift = 32,
- .set_next_event = exynos4_pwm_set_next_event,
- .set_mode = exynos4_pwm_set_mode,
-};
-
-irqreturn_t exynos4_clock_event_isr(int irq, void *dev_id)
-{
- struct clock_event_device *evt = &pwm_event_device;
-
- evt->event_handler(evt);
-
- return IRQ_HANDLED;
-}
-
-static struct irqaction exynos4_clock_event_irq = {
- .name = "pwm_timer2_irq",
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
- .handler = exynos4_clock_event_isr,
-};
-
-static void __init exynos4_clockevent_init(void)
-{
- unsigned long pclk;
- unsigned long clock_rate;
- struct clk *tscaler;
-
- pclk = clk_get_rate(timerclk);
-
- /* configure clock tick */
-
- tscaler = clk_get_parent(tdiv2);
-
- clk_set_rate(tscaler, pclk / 2);
- clk_set_rate(tdiv2, pclk / 2);
- clk_set_parent(tin2, tdiv2);
-
- clock_rate = clk_get_rate(tin2);
-
- clock_count_per_tick = clock_rate / HZ;
-
- pwm_event_device.mult =
- div_sc(clock_rate, NSEC_PER_SEC, pwm_event_device.shift);
- pwm_event_device.max_delta_ns =
- clockevent_delta2ns(-1, &pwm_event_device);
- pwm_event_device.min_delta_ns =
- clockevent_delta2ns(1, &pwm_event_device);
-
- pwm_event_device.cpumask = cpumask_of(0);
- clockevents_register_device(&pwm_event_device);
-
- setup_irq(IRQ_TIMER2, &exynos4_clock_event_irq);
-}
-
-static cycle_t exynos4_pwm4_read(struct clocksource *cs)
-{
- return (cycle_t) ~__raw_readl(S3C_TIMERREG(0x40));
-}
-
-#ifdef CONFIG_PM
-static void exynos4_pwm4_resume(struct clocksource *cs)
-{
- unsigned long pclk;
-
- pclk = clk_get_rate(timerclk);
-
- clk_set_rate(tdiv4, pclk / 2);
- clk_set_parent(tin4, tdiv4);
-
- exynos4_pwm_init(4, ~0);
- exynos4_pwm_start(4, 1);
-}
-#endif
-
-struct clocksource pwm_clocksource = {
- .name = "pwm_timer4",
- .rating = 250,
- .read = exynos4_pwm4_read,
- .mask = CLOCKSOURCE_MASK(32),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS ,
-#ifdef CONFIG_PM
- .resume = exynos4_pwm4_resume,
-#endif
-};
-
-static void __init exynos4_clocksource_init(void)
-{
- unsigned long pclk;
- unsigned long clock_rate;
-
- pclk = clk_get_rate(timerclk);
-
- clk_set_rate(tdiv4, pclk / 2);
- clk_set_parent(tin4, tdiv4);
-
- clock_rate = clk_get_rate(tin4);
-
- exynos4_pwm_init(4, ~0);
- exynos4_pwm_start(4, 1);
-
- if (clocksource_register_hz(&pwm_clocksource, clock_rate))
- panic("%s: can't register clocksource\n", pwm_clocksource.name);
-}
-
-static void __init exynos4_timer_resources(void)
-{
- struct platform_device tmpdev;
-
- tmpdev.dev.bus = &platform_bus_type;
-
- timerclk = clk_get(NULL, "timers");
- if (IS_ERR(timerclk))
- panic("failed to get timers clock for system timer");
-
- clk_enable(timerclk);
-
- tmpdev.id = 2;
- tin2 = clk_get(&tmpdev.dev, "pwm-tin");
- if (IS_ERR(tin2))
- panic("failed to get pwm-tin2 clock for system timer");
-
- tdiv2 = clk_get(&tmpdev.dev, "pwm-tdiv");
- if (IS_ERR(tdiv2))
- panic("failed to get pwm-tdiv2 clock for system timer");
- clk_enable(tin2);
-
- tmpdev.id = 4;
- tin4 = clk_get(&tmpdev.dev, "pwm-tin");
- if (IS_ERR(tin4))
- panic("failed to get pwm-tin4 clock for system timer");
-
- tdiv4 = clk_get(&tmpdev.dev, "pwm-tdiv");
- if (IS_ERR(tdiv4))
- panic("failed to get pwm-tdiv4 clock for system timer");
-
- clk_enable(tin4);
-}
-
-static void __init exynos4_timer_init(void)
-{
-#ifdef CONFIG_LOCAL_TIMERS
- twd_base = S5P_VA_TWD;
-#endif
-
- exynos4_timer_resources();
- exynos4_clockevent_init();
- exynos4_clocksource_init();
-}
-
-struct sys_timer exynos4_timer = {
- .init = exynos4_timer_init,
-};
select SOC_IMX27
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
+ select IMX_HAVE_PLATFORM_IMX_FB
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_KEYPAD
select IMX_HAVE_PLATFORM_IMX_UART
#include <linux/mfd/mc13783.h>
#include <linux/spi/spi.h>
#include <linux/regulator/machine.h>
+#include <linux/spi/l4f00242t03.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#define SPI2_SS0 IMX_GPIO_NR(4, 21)
#define EXPIO_PARENT_INT gpio_to_irq(IMX_GPIO_NR(3, 28))
#define PMIC_INT IMX_GPIO_NR(3, 14)
+#define SPI1_SS0 IMX_GPIO_NR(4, 28)
#define SD1_CD IMX_GPIO_NR(2, 26)
+#define LCD_RESET IMX_GPIO_NR(1, 3)
+#define LCD_ENABLE IMX_GPIO_NR(1, 31)
static const int mx27pdk_pins[] __initconst = {
/* UART1 */
PE2_PF_USBOTG_DIR,
PE24_PF_USBOTG_CLK,
PE25_PF_USBOTG_DATA7,
+ /* CSPI1 */
+ PD31_PF_CSPI1_MOSI,
+ PD30_PF_CSPI1_MISO,
+ PD29_PF_CSPI1_SCLK,
+ PD25_PF_CSPI1_RDY,
+ SPI1_SS0 | GPIO_GPIO | GPIO_OUT,
/* CSPI2 */
PD22_PF_CSPI2_SCLK,
PD23_PF_CSPI2_MISO,
PD18_PF_I2C_CLK,
/* PMIC INT */
PMIC_INT | GPIO_GPIO | GPIO_IN,
+ /* LCD */
+ PA5_PF_LSCLK,
+ PA6_PF_LD0,
+ PA7_PF_LD1,
+ PA8_PF_LD2,
+ PA9_PF_LD3,
+ PA10_PF_LD4,
+ PA11_PF_LD5,
+ PA12_PF_LD6,
+ PA13_PF_LD7,
+ PA14_PF_LD8,
+ PA15_PF_LD9,
+ PA16_PF_LD10,
+ PA17_PF_LD11,
+ PA18_PF_LD12,
+ PA19_PF_LD13,
+ PA20_PF_LD14,
+ PA21_PF_LD15,
+ PA22_PF_LD16,
+ PA23_PF_LD17,
+ PA28_PF_HSYNC,
+ PA29_PF_VSYNC,
+ PA30_PF_CONTRAST,
+ LCD_ENABLE | GPIO_GPIO | GPIO_OUT,
+ LCD_RESET | GPIO_GPIO | GPIO_OUT,
};
static const struct imxuart_platform_data uart_pdata __initconst = {
.num_regulators = ARRAY_SIZE(mx27_3ds_regulators),
},
- .flags = MC13783_USE_REGULATOR,
+ .flags = MC13783_USE_REGULATOR | MC13783_USE_TOUCHSCREEN |
+ MC13783_USE_RTC,
};
/* SPI */
+static int spi1_chipselect[] = {SPI1_SS0};
+
+static const struct spi_imx_master spi1_pdata __initconst = {
+ .chipselect = spi1_chipselect,
+ .num_chipselect = ARRAY_SIZE(spi1_chipselect),
+};
+
static int spi2_chipselect[] = {SPI2_SS0};
static const struct spi_imx_master spi2_pdata __initconst = {
.num_chipselect = ARRAY_SIZE(spi2_chipselect),
};
+static struct imx_fb_videomode mx27_3ds_modes[] = {
+ { /* 480x640 @ 60 Hz */
+ .mode = {
+ .name = "Epson-VGA",
+ .refresh = 60,
+ .xres = 480,
+ .yres = 640,
+ .pixclock = 41701,
+ .left_margin = 20,
+ .right_margin = 41,
+ .upper_margin = 10,
+ .lower_margin = 5,
+ .hsync_len = 20,
+ .vsync_len = 10,
+ .sync = FB_SYNC_OE_ACT_HIGH |
+ FB_SYNC_CLK_INVERT,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+ },
+ .bpp = 16,
+ .pcr = 0xFAC08B82,
+ },
+};
+
+static const struct imx_fb_platform_data mx27_3ds_fb_data __initconst = {
+ .mode = mx27_3ds_modes,
+ .num_modes = ARRAY_SIZE(mx27_3ds_modes),
+ .pwmr = 0x00A903FF,
+ .lscr1 = 0x00120300,
+ .dmacr = 0x00020010,
+};
+
+/* LCD */
+static struct l4f00242t03_pdata mx27_3ds_lcd_pdata = {
+ .reset_gpio = LCD_RESET,
+ .data_enable_gpio = LCD_ENABLE,
+ .core_supply = "lcd_2v8",
+ .io_supply = "vdd_lcdio",
+};
+
static struct spi_board_info mx27_3ds_spi_devs[] __initdata = {
{
.modalias = "mc13783",
.platform_data = &mc13783_pdata,
.irq = gpio_to_irq(PMIC_INT),
.mode = SPI_CS_HIGH,
+ }, {
+ .modalias = "l4f00242t03",
+ .max_speed_hz = 5000000,
+ .bus_num = 0,
+ .chip_select = 0, /* SS0 */
+ .platform_data = &mx27_3ds_lcd_pdata,
},
};
imx27_add_fsl_usb2_udc(&otg_device_pdata);
imx27_add_spi_imx1(&spi2_pdata);
+ imx27_add_spi_imx0(&spi1_pdata);
spi_register_board_info(mx27_3ds_spi_devs,
ARRAY_SIZE(mx27_3ds_spi_devs));
if (mxc_expio_init(MX27_CS5_BASE_ADDR, EXPIO_PARENT_INT))
pr_warn("Init of the debugboard failed, all devices on the debugboard are unusable.\n");
imx27_add_imx_i2c(0, &mx27_3ds_i2c0_data);
+ imx27_add_imx_fb(&mx27_3ds_fb_data);
}
static void __init mx27pdk_timer_init(void)
#include <linux/init.h>
#include <mach/hardware.h>
#include <mach/common.h>
+#include <mach/devices-common.h>
#include <asm/pgtable.h>
#include <asm/mach/map.h>
#include <mach/irqs.h>
mxc_register_gpio("imx21-gpio", 3, MX21_GPIO4_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
mxc_register_gpio("imx21-gpio", 4, MX21_GPIO5_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
mxc_register_gpio("imx21-gpio", 5, MX21_GPIO6_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
+
+ imx_add_imx_dma();
}
#include <asm/mach/map.h>
#include <mach/common.h>
+#include <mach/devices-common.h>
#include <mach/hardware.h>
#include <mach/mx25.h>
#include <mach/iomux-v3.h>
mxc_init_irq(MX25_IO_ADDRESS(MX25_AVIC_BASE_ADDR));
}
+static struct sdma_script_start_addrs imx25_sdma_script __initdata = {
+ .ap_2_ap_addr = 729,
+ .uart_2_mcu_addr = 904,
+ .per_2_app_addr = 1255,
+ .mcu_2_app_addr = 834,
+ .uartsh_2_mcu_addr = 1120,
+ .per_2_shp_addr = 1329,
+ .mcu_2_shp_addr = 1048,
+ .ata_2_mcu_addr = 1560,
+ .mcu_2_ata_addr = 1479,
+ .app_2_per_addr = 1189,
+ .app_2_mcu_addr = 770,
+ .shp_2_per_addr = 1407,
+ .shp_2_mcu_addr = 979,
+};
+
+static struct sdma_platform_data imx25_sdma_pdata __initdata = {
+ .sdma_version = 2,
+ .fw_name = "sdma-imx25.bin",
+ .script_addrs = &imx25_sdma_script,
+};
+
void __init imx25_soc_init(void)
{
/* i.mx25 has the i.mx31 type gpio */
mxc_register_gpio("imx31-gpio", 1, MX25_GPIO2_BASE_ADDR, SZ_16K, MX25_INT_GPIO2, 0);
mxc_register_gpio("imx31-gpio", 2, MX25_GPIO3_BASE_ADDR, SZ_16K, MX25_INT_GPIO3, 0);
mxc_register_gpio("imx31-gpio", 3, MX25_GPIO4_BASE_ADDR, SZ_16K, MX25_INT_GPIO4, 0);
+
+ imx_add_imx_sdma(MX25_SDMA_BASE_ADDR, MX25_INT_SDMA, &imx25_sdma_pdata);
}
#include <linux/init.h>
#include <mach/hardware.h>
#include <mach/common.h>
+#include <mach/devices-common.h>
#include <asm/pgtable.h>
#include <asm/mach/map.h>
#include <mach/irqs.h>
mxc_register_gpio("imx21-gpio", 3, MX27_GPIO4_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
mxc_register_gpio("imx21-gpio", 4, MX27_GPIO5_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
mxc_register_gpio("imx21-gpio", 5, MX27_GPIO6_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
+
+ imx_add_imx_dma();
}
#include <asm/mach/map.h>
#include <mach/common.h>
+#include <mach/devices-common.h>
#include <mach/hardware.h>
#include <mach/iomux-v3.h>
#include <mach/irqs.h>
mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR));
}
+static struct sdma_script_start_addrs imx31_to1_sdma_script __initdata = {
+ .per_2_per_addr = 1677,
+};
+
+static struct sdma_script_start_addrs imx31_to2_sdma_script __initdata = {
+ .ap_2_ap_addr = 423,
+ .ap_2_bp_addr = 829,
+ .bp_2_ap_addr = 1029,
+};
+
+static struct sdma_platform_data imx31_sdma_pdata __initdata = {
+ .sdma_version = 1,
+ .fw_name = "sdma-imx31-to2.bin",
+ .script_addrs = &imx31_to2_sdma_script,
+};
+
void __init imx31_soc_init(void)
{
+ int to_version = mx31_revision() >> 4;
+
mxc_register_gpio("imx31-gpio", 0, MX31_GPIO1_BASE_ADDR, SZ_16K, MX31_INT_GPIO1, 0);
mxc_register_gpio("imx31-gpio", 1, MX31_GPIO2_BASE_ADDR, SZ_16K, MX31_INT_GPIO2, 0);
mxc_register_gpio("imx31-gpio", 2, MX31_GPIO3_BASE_ADDR, SZ_16K, MX31_INT_GPIO3, 0);
+
+ if (to_version == 1) {
+ strncpy(imx31_sdma_pdata.fw_name, "sdma-imx31-to1.bin",
+ strlen(imx31_sdma_pdata.fw_name));
+ imx31_sdma_pdata.script_addrs = &imx31_to1_sdma_script;
+ }
+
+ imx_add_imx_sdma(MX31_SDMA_BASE_ADDR, MX31_INT_SDMA, &imx31_sdma_pdata);
}
#include <asm/hardware/cache-l2x0.h>
#include <mach/common.h>
+#include <mach/devices-common.h>
#include <mach/hardware.h>
#include <mach/iomux-v3.h>
#include <mach/irqs.h>
mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR));
}
+static struct sdma_script_start_addrs imx35_to1_sdma_script __initdata = {
+ .ap_2_ap_addr = 642,
+ .uart_2_mcu_addr = 817,
+ .mcu_2_app_addr = 747,
+ .uartsh_2_mcu_addr = 1183,
+ .per_2_shp_addr = 1033,
+ .mcu_2_shp_addr = 961,
+ .ata_2_mcu_addr = 1333,
+ .mcu_2_ata_addr = 1252,
+ .app_2_mcu_addr = 683,
+ .shp_2_per_addr = 1111,
+ .shp_2_mcu_addr = 892,
+};
+
+static struct sdma_script_start_addrs imx35_to2_sdma_script __initdata = {
+ .ap_2_ap_addr = 729,
+ .uart_2_mcu_addr = 904,
+ .per_2_app_addr = 1597,
+ .mcu_2_app_addr = 834,
+ .uartsh_2_mcu_addr = 1270,
+ .per_2_shp_addr = 1120,
+ .mcu_2_shp_addr = 1048,
+ .ata_2_mcu_addr = 1429,
+ .mcu_2_ata_addr = 1339,
+ .app_2_per_addr = 1531,
+ .app_2_mcu_addr = 770,
+ .shp_2_per_addr = 1198,
+ .shp_2_mcu_addr = 979,
+};
+
+static struct sdma_platform_data imx35_sdma_pdata __initdata = {
+ .sdma_version = 2,
+ .fw_name = "sdma-imx35-to2.bin",
+ .script_addrs = &imx35_to2_sdma_script,
+};
+
void __init imx35_soc_init(void)
{
+ int to_version = mx35_revision() >> 4;
+
/* i.mx35 has the i.mx31 type gpio */
mxc_register_gpio("imx31-gpio", 0, MX35_GPIO1_BASE_ADDR, SZ_16K, MX35_INT_GPIO1, 0);
mxc_register_gpio("imx31-gpio", 1, MX35_GPIO2_BASE_ADDR, SZ_16K, MX35_INT_GPIO2, 0);
mxc_register_gpio("imx31-gpio", 2, MX35_GPIO3_BASE_ADDR, SZ_16K, MX35_INT_GPIO3, 0);
+
+ if (to_version == 1) {
+ strncpy(imx35_sdma_pdata.fw_name, "sdma-imx35-to1.bin",
+ strlen(imx35_sdma_pdata.fw_name));
+ imx35_sdma_pdata.script_addrs = &imx35_to1_sdma_script;
+ }
+
+ imx_add_imx_sdma(MX35_SDMA_BASE_ADDR, MX35_INT_SDMA, &imx35_sdma_pdata);
}
_REGISTER_CLOCK("lpc32xx-nand.0", "nand_ck", clk_nand)
_REGISTER_CLOCK("tbd", "i2s0_ck", clk_i2s0)
_REGISTER_CLOCK("tbd", "i2s1_ck", clk_i2s1)
- _REGISTER_CLOCK("lpc32xx-ts", NULL, clk_tsc)
+ _REGISTER_CLOCK("ts-lpc32xx", NULL, clk_tsc)
_REGISTER_CLOCK("dev:mmc0", "MCLK", clk_mmc)
_REGISTER_CLOCK("lpc-net.0", NULL, clk_net)
_REGISTER_CLOCK("dev:clcd", NULL, clk_lcd)
},
};
+/* TSC (Touch Screen Controller) */
+
+static struct resource lpc32xx_tsc_resources[] = {
+ {
+ .start = LPC32XX_ADC_BASE,
+ .end = LPC32XX_ADC_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_LPC32XX_TS_IRQ,
+ .end = IRQ_LPC32XX_TS_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device lpc32xx_tsc_device = {
+ .name = "ts-lpc32xx",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(lpc32xx_tsc_resources),
+ .resource = lpc32xx_tsc_resources,
+};
+
+/* RTC */
+
+static struct resource lpc32xx_rtc_resources[] = {
+ {
+ .start = LPC32XX_RTC_BASE,
+ .end = LPC32XX_RTC_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = IRQ_LPC32XX_RTC,
+ .end = IRQ_LPC32XX_RTC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device lpc32xx_rtc_device = {
+ .name = "rtc-lpc32xx",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(lpc32xx_rtc_resources),
+ .resource = lpc32xx_rtc_resources,
+};
+
/*
* Returns the unique ID for the device
*/
extern struct platform_device lpc32xx_i2c0_device;
extern struct platform_device lpc32xx_i2c1_device;
extern struct platform_device lpc32xx_i2c2_device;
+extern struct platform_device lpc32xx_tsc_device;
+extern struct platform_device lpc32xx_rtc_device;
/*
* Other arch specific structures and functions
Say 'Y' here if you want to support the Marvell PXA168-based
Teton BGA Development Board.
+config MACH_SHEEVAD
+ bool "Marvell's PXA168 GuruPlug Display (gplugD) Board"
+ select CPU_PXA168
+ help
+ Say 'Y' here if you want to support the Marvell PXA168-based
+ GuruPlug Display (gplugD) Board
+
endmenu
config CPU_PXA168
obj-$(CONFIG_MACH_FLINT) += flint.o
obj-$(CONFIG_MACH_MARVELL_JASPER) += jasper.o
obj-$(CONFIG_MACH_TETON_BGA) += teton_bga.o
+obj-$(CONFIG_MACH_SHEEVAD) += gplugd.o
return rate;
}
EXPORT_SYMBOL(clk_get_rate);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned long flags;
+ int ret = -EINVAL;
+
+ if (clk->ops->setrate) {
+ spin_lock_irqsave(&clocks_lock, flags);
+ ret = clk->ops->setrate(clk, rate);
+ spin_unlock_irqrestore(&clocks_lock, flags);
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL(clk_set_rate);
void (*enable)(struct clk *);
void (*disable)(struct clk *);
unsigned long (*getrate)(struct clk *);
+ int (*setrate)(struct clk *, unsigned long);
};
struct clk {
--- /dev/null
+/*
+ * linux/arch/arm/mach-mmp/gplugd.c
+ *
+ * Support for the Marvell PXA168-based GuruPlug Display (gplugD) Platform.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <mach/gpio.h>
+#include <mach/pxa168.h>
+#include <mach/mfp-pxa168.h>
+#include <mach/mfp-gplugd.h>
+
+#include "common.h"
+
+static unsigned long gplugd_pin_config[] __initdata = {
+ /* UART3 */
+ GPIO8_UART3_SOUT,
+ GPIO9_UART3_SIN,
+ GPI1O_UART3_CTS,
+ GPI11_UART3_RTS,
+
+ /* MMC2 */
+ GPIO28_MMC2_CMD,
+ GPIO29_MMC2_CLK,
+ GPIO30_MMC2_DAT0,
+ GPIO31_MMC2_DAT1,
+ GPIO32_MMC2_DAT2,
+ GPIO33_MMC2_DAT3,
+
+ /* LCD & HDMI clock selection GPIO: 0: 74.176MHz, 1: 74.25 MHz */
+ GPIO35_GPIO,
+ GPIO36_GPIO, /* CEC Interrupt */
+
+ /* MMC1 */
+ GPIO43_MMC1_CLK,
+ GPIO49_MMC1_CMD,
+ GPIO41_MMC1_DAT0,
+ GPIO40_MMC1_DAT1,
+ GPIO52_MMC1_DAT2,
+ GPIO51_MMC1_DAT3,
+ GPIO53_MMC1_CD,
+
+ /* LCD */
+ GPIO56_LCD_FCLK_RD,
+ GPIO57_LCD_LCLK_A0,
+ GPIO58_LCD_PCLK_WR,
+ GPIO59_LCD_DENA_BIAS,
+ GPIO60_LCD_DD0,
+ GPIO61_LCD_DD1,
+ GPIO62_LCD_DD2,
+ GPIO63_LCD_DD3,
+ GPIO64_LCD_DD4,
+ GPIO65_LCD_DD5,
+ GPIO66_LCD_DD6,
+ GPIO67_LCD_DD7,
+ GPIO68_LCD_DD8,
+ GPIO69_LCD_DD9,
+ GPIO70_LCD_DD10,
+ GPIO71_LCD_DD11,
+ GPIO72_LCD_DD12,
+ GPIO73_LCD_DD13,
+ GPIO74_LCD_DD14,
+ GPIO75_LCD_DD15,
+ GPIO76_LCD_DD16,
+ GPIO77_LCD_DD17,
+ GPIO78_LCD_DD18,
+ GPIO79_LCD_DD19,
+ GPIO80_LCD_DD20,
+ GPIO81_LCD_DD21,
+ GPIO82_LCD_DD22,
+ GPIO83_LCD_DD23,
+
+ /* GPIO */
+ GPIO84_GPIO,
+ GPIO85_GPIO,
+
+ /* Fast-Ethernet*/
+ GPIO86_TX_CLK,
+ GPIO87_TX_EN,
+ GPIO88_TX_DQ3,
+ GPIO89_TX_DQ2,
+ GPIO90_TX_DQ1,
+ GPIO91_TX_DQ0,
+ GPIO92_MII_CRS,
+ GPIO93_MII_COL,
+ GPIO94_RX_CLK,
+ GPIO95_RX_ER,
+ GPIO96_RX_DQ3,
+ GPIO97_RX_DQ2,
+ GPIO98_RX_DQ1,
+ GPIO99_RX_DQ0,
+ GPIO100_MII_MDC,
+ GPIO101_MII_MDIO,
+ GPIO103_RX_DV,
+ GPIO104_GPIO, /* Reset PHY */
+
+ /* RTC interrupt */
+ GPIO102_GPIO,
+
+ /* I2C */
+ GPIO105_CI2C_SDA,
+ GPIO106_CI2C_SCL,
+
+ /* Select JTAG */
+ GPIO109_GPIO,
+
+ /* I2S */
+ GPIO114_I2S_FRM,
+ GPIO115_I2S_BCLK,
+ GPIO116_I2S_TXD
+};
+
+static struct i2c_board_info gplugd_i2c_board_info[] = {
+ {
+ .type = "isl1208",
+ .addr = 0x6F,
+ }
+};
+
+/* Bring PHY out of reset by setting GPIO 104 */
+static int gplugd_eth_init(void)
+{
+ if (unlikely(gpio_request(104, "ETH_RESET_N"))) {
+ printk(KERN_ERR "Can't get hold of GPIO 104 to bring Ethernet "
+ "PHY out of reset\n");
+ return -EIO;
+ }
+
+ gpio_direction_output(104, 1);
+ gpio_free(104);
+ return 0;
+}
+
+struct pxa168_eth_platform_data gplugd_eth_platform_data = {
+ .port_number = 0,
+ .phy_addr = 0,
+ .speed = 0, /* Autonagotiation */
+ .init = gplugd_eth_init,
+};
+
+static void __init select_disp_freq(void)
+{
+ /* set GPIO 35 & clear GPIO 85 to set LCD External Clock to 74.25 MHz */
+ if (unlikely(gpio_request(35, "DISP_FREQ_SEL"))) {
+ printk(KERN_ERR "Can't get hold of GPIO 35 to select display "
+ "frequency\n");
+ } else {
+ gpio_direction_output(35, 1);
+ gpio_free(104);
+ }
+
+ if (unlikely(gpio_request(85, "DISP_FREQ_SEL_2"))) {
+ printk(KERN_ERR "Can't get hold of GPIO 85 to select display "
+ "frequency\n");
+ } else {
+ gpio_direction_output(85, 0);
+ gpio_free(104);
+ }
+}
+
+static void __init gplugd_init(void)
+{
+ mfp_config(ARRAY_AND_SIZE(gplugd_pin_config));
+
+ select_disp_freq();
+
+ /* on-chip devices */
+ pxa168_add_uart(3);
+ pxa168_add_ssp(0);
+ pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(gplugd_i2c_board_info));
+
+ pxa168_add_eth(&gplugd_eth_platform_data);
+}
+
+MACHINE_START(SHEEVAD, "PXA168-based GuruPlug Display (gplugD) Platform")
+ .map_io = mmp_map_io,
+ .nr_irqs = IRQ_BOARD_START,
+ .init_irq = pxa168_init_irq,
+ .timer = &pxa168_timer,
+ .init_machine = gplugd_init,
+MACHINE_END
--- /dev/null
+/*
+ * linux/arch/arm/mach-mmp/include/mach/mfp-gplugd.h
+ *
+ * MFP definitions used in gplugD
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MACH_MFP_GPLUGD_H
+#define __MACH_MFP_GPLUGD_H
+
+#include <plat/mfp.h>
+#include <mach/mfp.h>
+
+/* UART3 */
+#define GPIO8_UART3_SOUT MFP_CFG(GPIO8, AF2)
+#define GPIO9_UART3_SIN MFP_CFG(GPIO9, AF2)
+#define GPI1O_UART3_CTS MFP_CFG(GPIO10, AF2)
+#define GPI11_UART3_RTS MFP_CFG(GPIO11, AF2)
+
+/* MMC2 */
+#define GPIO28_MMC2_CMD MFP_CFG_DRV(GPIO28, AF6, FAST)
+#define GPIO29_MMC2_CLK MFP_CFG_DRV(GPIO29, AF6, FAST)
+#define GPIO30_MMC2_DAT0 MFP_CFG_DRV(GPIO30, AF6, FAST)
+#define GPIO31_MMC2_DAT1 MFP_CFG_DRV(GPIO31, AF6, FAST)
+#define GPIO32_MMC2_DAT2 MFP_CFG_DRV(GPIO32, AF6, FAST)
+#define GPIO33_MMC2_DAT3 MFP_CFG_DRV(GPIO33, AF6, FAST)
+
+/* I2S */
+#undef GPIO114_I2S_FRM
+#undef GPIO115_I2S_BCLK
+
+#define GPIO114_I2S_FRM MFP_CFG_DRV(GPIO114, AF1, FAST)
+#define GPIO115_I2S_BCLK MFP_CFG_DRV(GPIO115, AF1, FAST)
+#define GPIO116_I2S_TXD MFP_CFG_DRV(GPIO116, AF1, FAST)
+
+/* MMC4 */
+#define GPIO125_MMC4_DAT3 MFP_CFG_DRV(GPIO125, AF7, FAST)
+#define GPIO126_MMC4_DAT2 MFP_CFG_DRV(GPIO126, AF7, FAST)
+#define GPIO127_MMC4_DAT1 MFP_CFG_DRV(GPIO127, AF7, FAST)
+#define GPIO0_2_MMC4_DAT0 MFP_CFG_DRV(GPIO0_2, AF7, FAST)
+#define GPIO1_2_MMC4_CMD MFP_CFG_DRV(GPIO1_2, AF7, FAST)
+#define GPIO2_2_MMC4_CLK MFP_CFG_DRV(GPIO2_2, AF7, FAST)
+
+/* OTG GPIO */
+#define GPIO_USB_OTG_PEN 18
+#define GPIO_USB_OIDIR 20
+
+/* Other GPIOs are 35, 84, 85 */
+#endif /* __MACH_MFP_GPLUGD_H */
#define GPIO112_KP_MKOUT6 MFP_CFG(GPIO112, AF7)
#define GPIO121_KP_MKIN4 MFP_CFG(GPIO121, AF7)
+/* Fast Ethernet */
+#define GPIO86_TX_CLK MFP_CFG(GPIO86, AF5)
+#define GPIO87_TX_EN MFP_CFG(GPIO87, AF5)
+#define GPIO88_TX_DQ3 MFP_CFG(GPIO88, AF5)
+#define GPIO89_TX_DQ2 MFP_CFG(GPIO89, AF5)
+#define GPIO90_TX_DQ1 MFP_CFG(GPIO90, AF5)
+#define GPIO91_TX_DQ0 MFP_CFG(GPIO91, AF5)
+#define GPIO92_MII_CRS MFP_CFG(GPIO92, AF5)
+#define GPIO93_MII_COL MFP_CFG(GPIO93, AF5)
+#define GPIO94_RX_CLK MFP_CFG(GPIO94, AF5)
+#define GPIO95_RX_ER MFP_CFG(GPIO95, AF5)
+#define GPIO96_RX_DQ3 MFP_CFG(GPIO96, AF5)
+#define GPIO97_RX_DQ2 MFP_CFG(GPIO97, AF5)
+#define GPIO98_RX_DQ1 MFP_CFG(GPIO98, AF5)
+#define GPIO99_RX_DQ0 MFP_CFG(GPIO99, AF5)
+#define GPIO100_MII_MDC MFP_CFG(GPIO100, AF5)
+#define GPIO101_MII_MDIO MFP_CFG(GPIO101, AF5)
+#define GPIO103_RX_DV MFP_CFG(GPIO103, AF5)
+
#endif /* __ASM_MACH_MFP_PXA168_H */
#include <video/pxa168fb.h>
#include <plat/pxa27x_keypad.h>
#include <mach/cputype.h>
+#include <linux/pxa168_eth.h>
extern struct pxa_device_desc pxa168_device_uart1;
extern struct pxa_device_desc pxa168_device_uart2;
+extern struct pxa_device_desc pxa168_device_uart3;
extern struct pxa_device_desc pxa168_device_twsi0;
extern struct pxa_device_desc pxa168_device_twsi1;
extern struct pxa_device_desc pxa168_device_pwm1;
extern struct pxa_device_desc pxa168_device_nand;
extern struct pxa_device_desc pxa168_device_fb;
extern struct pxa_device_desc pxa168_device_keypad;
+extern struct pxa_device_desc pxa168_device_eth;
static inline int pxa168_add_uart(int id)
{
switch (id) {
case 1: d = &pxa168_device_uart1; break;
case 2: d = &pxa168_device_uart2; break;
+ case 3: d = &pxa168_device_uart3; break;
}
if (d == NULL)
return pxa_register_device(&pxa168_device_keypad, data, sizeof(*data));
}
+static inline int pxa168_add_eth(struct pxa168_eth_platform_data *data)
+{
+ return pxa_register_device(&pxa168_device_eth, data, sizeof(*data));
+}
#endif /* __ASM_MACH_PXA168_H */
#define APMU_BUS APMU_REG(0x06c)
#define APMU_SDH2 APMU_REG(0x0e8)
#define APMU_SDH3 APMU_REG(0x0ec)
+#define APMU_ETH APMU_REG(0x0fc)
#define APMU_FNCLK_EN (1 << 4)
#define APMU_AXICLK_EN (1 << 3)
/* APB peripheral clocks */
static APBC_CLK(uart1, PXA168_UART1, 1, 14745600);
static APBC_CLK(uart2, PXA168_UART2, 1, 14745600);
+static APBC_CLK(uart3, PXA168_UART3, 1, 14745600);
static APBC_CLK(twsi0, PXA168_TWSI0, 1, 33000000);
static APBC_CLK(twsi1, PXA168_TWSI1, 1, 33000000);
static APBC_CLK(pwm1, PXA168_PWM1, 1, 13000000);
static APMU_CLK(nand, NAND, 0x19b, 156000000);
static APMU_CLK(lcd, LCD, 0x7f, 312000000);
+static APMU_CLK(eth, ETH, 0x09, 0);
/* device and clock bindings */
static struct clk_lookup pxa168_clkregs[] = {
INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
+ INIT_CLKREG(&clk_uart3, "pxa2xx-uart.2", NULL),
INIT_CLKREG(&clk_twsi0, "pxa2xx-i2c.0", NULL),
INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.1", NULL),
INIT_CLKREG(&clk_pwm1, "pxa168-pwm.0", NULL),
INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
INIT_CLKREG(&clk_lcd, "pxa168-fb", NULL),
INIT_CLKREG(&clk_keypad, "pxa27x-keypad", NULL),
+ INIT_CLKREG(&clk_eth, "pxa168-eth", "MFUCLK"),
};
static int __init pxa168_init(void)
/* on-chip devices */
PXA168_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4017000, 0x30, 21, 22);
PXA168_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4018000, 0x30, 23, 24);
+PXA168_DEVICE(uart3, "pxa2xx-uart", 2, UART3, 0xd4026000, 0x30, 23, 24);
PXA168_DEVICE(twsi0, "pxa2xx-i2c", 0, TWSI0, 0xd4011000, 0x28);
PXA168_DEVICE(twsi1, "pxa2xx-i2c", 1, TWSI1, 0xd4025000, 0x28);
PXA168_DEVICE(pwm1, "pxa168-pwm", 0, NONE, 0xd401a000, 0x10);
PXA168_DEVICE(ssp5, "pxa168-ssp", 4, SSP5, 0xd4021000, 0x40, 60, 61);
PXA168_DEVICE(fb, "pxa168-fb", -1, LCD, 0xd420b000, 0x1c8);
PXA168_DEVICE(keypad, "pxa27x-keypad", -1, KEYPAD, 0xd4012000, 0x4c);
+PXA168_DEVICE(eth, "pxa168-eth", -1, MFU, 0xc0800000, 0x0fff);
#include <linux/mtd/partitions.h>
#include <linux/mtd/onenand.h>
#include <linux/interrupt.h>
+#include <linux/i2c/pca953x.h>
+#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include "common.h"
-#define TTCDKB_NR_IRQS (IRQ_BOARD_START + 24)
+#define TTCDKB_GPIO_EXT0(x) (NR_BUILTIN_GPIO + ((x < 0) ? 0 : \
+ ((x < 16) ? x : 15)))
+#define TTCDKB_GPIO_EXT1(x) (NR_BUILTIN_GPIO + 16 + ((x < 0) ? 0 : \
+ ((x < 16) ? x : 15)))
+
+/*
+ * 16 board interrupts -- MAX7312 GPIO expander
+ * 16 board interrupts -- PCA9575 GPIO expander
+ * 24 board interrupts -- 88PM860x PMIC
+ */
+#define TTCDKB_NR_IRQS (IRQ_BOARD_START + 16 + 16 + 24)
static unsigned long ttc_dkb_pin_config[] __initdata = {
/* UART2 */
&ttc_dkb_device_onenand,
};
+static struct pca953x_platform_data max7312_data[] = {
+ {
+ .gpio_base = TTCDKB_GPIO_EXT0(0),
+ .irq_base = IRQ_BOARD_START,
+ },
+};
+
+static struct i2c_board_info ttc_dkb_i2c_info[] = {
+ {
+ .type = "max7312",
+ .addr = 0x23,
+ .irq = IRQ_GPIO(80),
+ .platform_data = &max7312_data,
+ },
+};
+
static void __init ttc_dkb_init(void)
{
mfp_config(ARRAY_AND_SIZE(ttc_dkb_pin_config));
pxa910_add_uart(1);
/* off-chip devices */
+ pxa910_add_twsi(0, NULL, ARRAY_AND_SIZE(ttc_dkb_i2c_info));
platform_add_devices(ARRAY_AND_SIZE(ttc_dkb_devices));
}
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select IMX_HAVE_PLATFORM_SPI_IMX
+ select LEDS_GPIO_REGISTER
help
Include support for MX53 EVK platform. This includes specific
configurations for the board and its peripherals.
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select IMX_HAVE_PLATFORM_GPIO_KEYS
+ select LEDS_GPIO_REGISTER
help
Include support for MX53 LOCO platform. This includes specific
configurations for the board and its peripherals.
+config MACH_MX53_ARD
+ bool "Support MX53 ARD platforms"
+ select SOC_IMX53
+ select IMX_HAVE_PLATFORM_IMX2_WDT
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+ select IMX_HAVE_PLATFORM_GPIO_KEYS
+ help
+ Include support for MX53 ARD platform. This includes specific
+ configurations for the board and its peripherals.
+
endif # ARCH_MX53_SUPPORTED
endif
obj-y := cpu.o mm.o clock-mx51-mx53.o devices.o ehci.o system.o
obj-$(CONFIG_SOC_IMX50) += mm-mx50.o
+obj-$(CONFIG_PM) += pm-imx5.o
obj-$(CONFIG_CPU_FREQ_IMX) += cpu_op-mx51.o
obj-$(CONFIG_MACH_MX51_BABBAGE) += board-mx51_babbage.o
obj-$(CONFIG_MACH_MX51_3DS) += board-mx51_3ds.o
obj-$(CONFIG_MACH_MX53_EVK) += board-mx53_evk.o
obj-$(CONFIG_MACH_MX53_SMD) += board-mx53_smd.o
obj-$(CONFIG_MACH_MX53_LOCO) += board-mx53_loco.o
+obj-$(CONFIG_MACH_MX53_ARD) += board-mx53_ard.o
obj-$(CONFIG_MACH_EUKREA_CPUIMX51) += board-cpuimx51.o
obj-$(CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD) += eukrea_mbimx51-baseboard.o
obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += board-cpuimx51sd.o
#define BABBAGE_POWER_KEY IMX_GPIO_NR(2, 21)
#define BABBAGE_ECSPI1_CS0 IMX_GPIO_NR(4, 24)
#define BABBAGE_ECSPI1_CS1 IMX_GPIO_NR(4, 25)
+#define BABBAGE_SD1_CD IMX_GPIO_NR(1, 0)
+#define BABBAGE_SD1_WP IMX_GPIO_NR(1, 1)
+#define BABBAGE_SD2_CD IMX_GPIO_NR(1, 6)
+#define BABBAGE_SD2_WP IMX_GPIO_NR(1, 5)
/* USB_CTRL_1 */
#define MX51_USB_CTRL_1_OFFSET 0x10
MX51_PAD_SD1_DATA1__SD1_DATA1,
MX51_PAD_SD1_DATA2__SD1_DATA2,
MX51_PAD_SD1_DATA3__SD1_DATA3,
+ MX51_PAD_GPIO1_0__GPIO1_0,
+ MX51_PAD_GPIO1_1__GPIO1_1,
/* SD 2 */
MX51_PAD_SD2_CMD__SD2_CMD,
MX51_PAD_SD2_DATA1__SD2_DATA1,
MX51_PAD_SD2_DATA2__SD2_DATA2,
MX51_PAD_SD2_DATA3__SD2_DATA3,
+ MX51_PAD_GPIO1_6__GPIO1_6,
+ MX51_PAD_GPIO1_5__GPIO1_5,
/* eCSPI1 */
MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
.num_chipselect = ARRAY_SIZE(mx51_babbage_spi_cs),
};
+static const struct esdhc_platform_data mx51_babbage_sd1_data __initconst = {
+ .cd_gpio = BABBAGE_SD1_CD,
+ .wp_gpio = BABBAGE_SD1_WP,
+};
+
+static const struct esdhc_platform_data mx51_babbage_sd2_data __initconst = {
+ .cd_gpio = BABBAGE_SD2_CD,
+ .wp_gpio = BABBAGE_SD2_WP,
+};
+
/*
* Board specific initialization.
*/
mxc_iomux_v3_setup_pad(usbh1stp);
babbage_usbhub_reset();
- imx51_add_sdhci_esdhc_imx(0, NULL);
- imx51_add_sdhci_esdhc_imx(1, NULL);
+ imx51_add_sdhci_esdhc_imx(0, &mx51_babbage_sd1_data);
+ imx51_add_sdhci_esdhc_imx(1, &mx51_babbage_sd2_data);
spi_register_board_info(mx51_babbage_spi_board_info,
ARRAY_SIZE(mx51_babbage_spi_board_info));
--- /dev/null
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/smsc911x.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/iomux-mx53.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include "crm_regs.h"
+#include "devices-imx53.h"
+
+#define ARD_ETHERNET_INT_B IMX_GPIO_NR(2, 31)
+#define ARD_SD1_CD IMX_GPIO_NR(1, 1)
+#define ARD_SD1_WP IMX_GPIO_NR(1, 9)
+#define ARD_I2CPORTEXP_B IMX_GPIO_NR(2, 3)
+#define ARD_VOLUMEDOWN IMX_GPIO_NR(4, 0)
+#define ARD_HOME IMX_GPIO_NR(5, 10)
+#define ARD_BACK IMX_GPIO_NR(5, 11)
+#define ARD_PROG IMX_GPIO_NR(5, 12)
+#define ARD_VOLUMEUP IMX_GPIO_NR(5, 13)
+
+static iomux_v3_cfg_t mx53_ard_pads[] = {
+ /* UART1 */
+ MX53_PAD_PATA_DIOW__UART1_TXD_MUX,
+ MX53_PAD_PATA_DMACK__UART1_RXD_MUX,
+ /* WEIM for CS1 */
+ MX53_PAD_EIM_EB3__GPIO2_31, /* ETHERNET_INT_B */
+ MX53_PAD_EIM_D16__EMI_WEIM_D_16,
+ MX53_PAD_EIM_D17__EMI_WEIM_D_17,
+ MX53_PAD_EIM_D18__EMI_WEIM_D_18,
+ MX53_PAD_EIM_D19__EMI_WEIM_D_19,
+ MX53_PAD_EIM_D20__EMI_WEIM_D_20,
+ MX53_PAD_EIM_D21__EMI_WEIM_D_21,
+ MX53_PAD_EIM_D22__EMI_WEIM_D_22,
+ MX53_PAD_EIM_D23__EMI_WEIM_D_23,
+ MX53_PAD_EIM_D24__EMI_WEIM_D_24,
+ MX53_PAD_EIM_D25__EMI_WEIM_D_25,
+ MX53_PAD_EIM_D26__EMI_WEIM_D_26,
+ MX53_PAD_EIM_D27__EMI_WEIM_D_27,
+ MX53_PAD_EIM_D28__EMI_WEIM_D_28,
+ MX53_PAD_EIM_D29__EMI_WEIM_D_29,
+ MX53_PAD_EIM_D30__EMI_WEIM_D_30,
+ MX53_PAD_EIM_D31__EMI_WEIM_D_31,
+ MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0,
+ MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1,
+ MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2,
+ MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3,
+ MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4,
+ MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5,
+ MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6,
+ MX53_PAD_EIM_OE__EMI_WEIM_OE,
+ MX53_PAD_EIM_RW__EMI_WEIM_RW,
+ MX53_PAD_EIM_CS1__EMI_WEIM_CS_1,
+ /* SDHC1 */
+ MX53_PAD_SD1_CMD__ESDHC1_CMD,
+ MX53_PAD_SD1_CLK__ESDHC1_CLK,
+ MX53_PAD_SD1_DATA0__ESDHC1_DAT0,
+ MX53_PAD_SD1_DATA1__ESDHC1_DAT1,
+ MX53_PAD_SD1_DATA2__ESDHC1_DAT2,
+ MX53_PAD_SD1_DATA3__ESDHC1_DAT3,
+ MX53_PAD_PATA_DATA8__ESDHC1_DAT4,
+ MX53_PAD_PATA_DATA9__ESDHC1_DAT5,
+ MX53_PAD_PATA_DATA10__ESDHC1_DAT6,
+ MX53_PAD_PATA_DATA11__ESDHC1_DAT7,
+ MX53_PAD_GPIO_1__GPIO1_1,
+ MX53_PAD_GPIO_9__GPIO1_9,
+ /* I2C2 */
+ MX53_PAD_EIM_EB2__I2C2_SCL,
+ MX53_PAD_KEY_ROW3__I2C2_SDA,
+ /* I2C3 */
+ MX53_PAD_GPIO_3__I2C3_SCL,
+ MX53_PAD_GPIO_16__I2C3_SDA,
+ /* GPIO */
+ MX53_PAD_DISP0_DAT16__GPIO5_10, /* home */
+ MX53_PAD_DISP0_DAT17__GPIO5_11, /* back */
+ MX53_PAD_DISP0_DAT18__GPIO5_12, /* prog */
+ MX53_PAD_DISP0_DAT19__GPIO5_13, /* vol up */
+ MX53_PAD_GPIO_10__GPIO4_0, /* vol down */
+};
+
+#define GPIO_BUTTON(gpio_num, ev_code, act_low, descr, wake) \
+{ \
+ .gpio = gpio_num, \
+ .type = EV_KEY, \
+ .code = ev_code, \
+ .active_low = act_low, \
+ .desc = "btn " descr, \
+ .wakeup = wake, \
+}
+
+static struct gpio_keys_button ard_buttons[] = {
+ GPIO_BUTTON(ARD_HOME, KEY_HOME, 1, "home", 0),
+ GPIO_BUTTON(ARD_BACK, KEY_BACK, 1, "back", 0),
+ GPIO_BUTTON(ARD_PROG, KEY_PROGRAM, 1, "program", 0),
+ GPIO_BUTTON(ARD_VOLUMEUP, KEY_VOLUMEUP, 1, "volume-up", 0),
+ GPIO_BUTTON(ARD_VOLUMEDOWN, KEY_VOLUMEDOWN, 1, "volume-down", 0),
+};
+
+static const struct gpio_keys_platform_data ard_button_data __initconst = {
+ .buttons = ard_buttons,
+ .nbuttons = ARRAY_SIZE(ard_buttons),
+};
+
+static struct resource ard_smsc911x_resources[] = {
+ {
+ .start = MX53_CS1_64MB_BASE_ADDR,
+ .end = MX53_CS1_64MB_BASE_ADDR + SZ_32M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = gpio_to_irq(ARD_ETHERNET_INT_B),
+ .end = gpio_to_irq(ARD_ETHERNET_INT_B),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct smsc911x_platform_config ard_smsc911x_config = {
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+ .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
+ .flags = SMSC911X_USE_32BIT,
+};
+
+static struct platform_device ard_smsc_lan9220_device = {
+ .name = "smsc911x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(ard_smsc911x_resources),
+ .resource = ard_smsc911x_resources,
+ .dev = {
+ .platform_data = &ard_smsc911x_config,
+ },
+};
+
+static const struct esdhc_platform_data mx53_ard_sd1_data __initconst = {
+ .cd_gpio = ARD_SD1_CD,
+ .wp_gpio = ARD_SD1_WP,
+};
+
+static struct imxi2c_platform_data mx53_ard_i2c2_data = {
+ .bitrate = 50000,
+};
+
+static struct imxi2c_platform_data mx53_ard_i2c3_data = {
+ .bitrate = 400000,
+};
+
+static void __init mx53_ard_io_init(void)
+{
+ mxc_iomux_v3_setup_multiple_pads(mx53_ard_pads,
+ ARRAY_SIZE(mx53_ard_pads));
+
+ gpio_request(ARD_ETHERNET_INT_B, "eth-int-b");
+ gpio_direction_input(ARD_ETHERNET_INT_B);
+
+ gpio_request(ARD_I2CPORTEXP_B, "i2cptexp-rst");
+ gpio_direction_output(ARD_I2CPORTEXP_B, 1);
+}
+
+/* Config CS1 settings for ethernet controller */
+static int weim_cs_config(void)
+{
+ u32 reg;
+ void __iomem *weim_base, *iomuxc_base;
+
+ weim_base = ioremap(MX53_WEIM_BASE_ADDR, SZ_4K);
+ if (!weim_base)
+ return -ENOMEM;
+
+ iomuxc_base = ioremap(MX53_IOMUXC_BASE_ADDR, SZ_4K);
+ if (!iomuxc_base)
+ return -ENOMEM;
+
+ /* CS1 timings for LAN9220 */
+ writel(0x20001, (weim_base + 0x18));
+ writel(0x0, (weim_base + 0x1C));
+ writel(0x16000202, (weim_base + 0x20));
+ writel(0x00000002, (weim_base + 0x24));
+ writel(0x16002082, (weim_base + 0x28));
+ writel(0x00000000, (weim_base + 0x2C));
+ writel(0x00000000, (weim_base + 0x90));
+
+ /* specify 64 MB on CS1 and CS0 on GPR1 */
+ reg = readl(iomuxc_base + 0x4);
+ reg &= ~0x3F;
+ reg |= 0x1B;
+ writel(reg, (iomuxc_base + 0x4));
+
+ iounmap(iomuxc_base);
+ iounmap(weim_base);
+
+ return 0;
+}
+
+static struct platform_device *devices[] __initdata = {
+ &ard_smsc_lan9220_device,
+};
+
+static void __init mx53_ard_board_init(void)
+{
+ imx53_soc_init();
+ imx53_add_imx_uart(0, NULL);
+
+ mx53_ard_io_init();
+ weim_cs_config();
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+
+ imx53_add_sdhci_esdhc_imx(0, &mx53_ard_sd1_data);
+ imx53_add_imx2_wdt(0, NULL);
+ imx53_add_imx_i2c(1, &mx53_ard_i2c2_data);
+ imx53_add_imx_i2c(2, &mx53_ard_i2c3_data);
+ imx_add_gpio_keys(&ard_button_data);
+}
+
+static void __init mx53_ard_timer_init(void)
+{
+ mx53_clocks_init(32768, 24000000, 22579200, 0);
+}
+
+static struct sys_timer mx53_ard_timer = {
+ .init = mx53_ard_timer_init,
+};
+
+MACHINE_START(MX53_ARD, "Freescale MX53 ARD Board")
+ .map_io = mx53_map_io,
+ .init_early = imx53_init_early,
+ .init_irq = mx53_init_irq,
+ .timer = &mx53_ard_timer,
+ .init_machine = mx53_ard_board_init,
+MACHINE_END
#define MX53_EVK_FEC_PHY_RST IMX_GPIO_NR(7, 6)
#define EVK_ECSPI1_CS0 IMX_GPIO_NR(2, 30)
#define EVK_ECSPI1_CS1 IMX_GPIO_NR(3, 19)
+#define MX53EVK_LED IMX_GPIO_NR(7, 7)
#include "crm_regs.h"
#include "devices-imx53.h"
/* ecspi chip select lines */
MX53_PAD_EIM_EB2__GPIO2_30,
MX53_PAD_EIM_D19__GPIO3_19,
+ /* LED */
+ MX53_PAD_PATA_DA_1__GPIO7_7,
};
static const struct imxuart_platform_data mx53_evk_uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
+static const struct gpio_led mx53evk_leds[] __initconst = {
+ {
+ .name = "green",
+ .default_trigger = "heartbeat",
+ .gpio = MX53EVK_LED,
+ },
+};
+
+static const struct gpio_led_platform_data mx53evk_leds_data __initconst = {
+ .leds = mx53evk_leds,
+ .num_leds = ARRAY_SIZE(mx53evk_leds),
+};
+
static inline void mx53_evk_init_uart(void)
{
imx53_add_imx_uart(0, NULL);
ARRAY_SIZE(mx53_evk_spi_board_info));
imx53_add_ecspi(0, &mx53_evk_spi_data);
imx53_add_imx2_wdt(0, NULL);
+ gpio_led_register_device(-1, &mx53evk_leds_data);
}
static void __init mx53_evk_timer_init(void)
#define MX53_LOCO_UI1 IMX_GPIO_NR(2, 14)
#define MX53_LOCO_UI2 IMX_GPIO_NR(2, 15)
#define LOCO_FEC_PHY_RST IMX_GPIO_NR(7, 6)
+#define LOCO_LED IMX_GPIO_NR(7, 7)
+#define LOCO_SD3_CD IMX_GPIO_NR(3, 11)
+#define LOCO_SD3_WP IMX_GPIO_NR(3, 12)
+#define LOCO_SD1_CD IMX_GPIO_NR(3, 13)
static iomux_v3_cfg_t mx53_loco_pads[] = {
/* FEC */
MX53_PAD_SD1_DATA1__ESDHC1_DAT1,
MX53_PAD_SD1_DATA2__ESDHC1_DAT2,
MX53_PAD_SD1_DATA3__ESDHC1_DAT3,
+ /* SD1_CD */
+ MX53_PAD_EIM_DA13__GPIO3_13,
/* SD3 */
MX53_PAD_PATA_DATA8__ESDHC3_DAT0,
MX53_PAD_PATA_DATA9__ESDHC3_DAT1,
MX53_PAD_GPIO_7__SPDIF_PLOCK,
MX53_PAD_GPIO_17__SPDIF_OUT1,
/* GPIO */
- MX53_PAD_PATA_DA_1__GPIO7_7,
+ MX53_PAD_PATA_DA_1__GPIO7_7, /* LED */
MX53_PAD_PATA_DA_2__GPIO7_8,
MX53_PAD_PATA_DATA5__GPIO2_5,
MX53_PAD_PATA_DATA6__GPIO2_6,
.nbuttons = ARRAY_SIZE(loco_buttons),
};
+static const struct esdhc_platform_data mx53_loco_sd1_data __initconst = {
+ .cd_gpio = LOCO_SD1_CD,
+};
+
+static const struct esdhc_platform_data mx53_loco_sd3_data __initconst = {
+ .cd_gpio = LOCO_SD3_CD,
+ .wp_gpio = LOCO_SD3_WP,
+};
+
static inline void mx53_loco_fec_reset(void)
{
int ret;
.bitrate = 100000,
};
+static const struct gpio_led mx53loco_leds[] __initconst = {
+ {
+ .name = "green",
+ .default_trigger = "heartbeat",
+ .gpio = LOCO_LED,
+ },
+};
+
+static const struct gpio_led_platform_data mx53loco_leds_data __initconst = {
+ .leds = mx53loco_leds,
+ .num_leds = ARRAY_SIZE(mx53loco_leds),
+};
+
static void __init mx53_loco_board_init(void)
{
imx53_soc_init();
imx53_add_imx2_wdt(0, NULL);
imx53_add_imx_i2c(0, &mx53_loco_i2c_data);
imx53_add_imx_i2c(1, &mx53_loco_i2c_data);
- imx53_add_sdhci_esdhc_imx(0, NULL);
- imx53_add_sdhci_esdhc_imx(2, NULL);
+ imx53_add_sdhci_esdhc_imx(0, &mx53_loco_sd1_data);
+ imx53_add_sdhci_esdhc_imx(2, &mx53_loco_sd3_data);
imx_add_gpio_keys(&loco_button_data);
+ gpio_led_register_device(-1, &mx53loco_leds_data);
}
static void __init mx53_loco_timer_init(void)
NULL, NULL, &ipg_clk, &aips_tz1_clk);
DEFINE_CLOCK(uart3_ipg_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG7_OFFSET,
NULL, NULL, &ipg_clk, &spba_clk);
+DEFINE_CLOCK(uart4_ipg_clk, 3, MXC_CCM_CCGR7, MXC_CCM_CCGRx_CG4_OFFSET,
+ NULL, NULL, &ipg_clk, &spba_clk);
+DEFINE_CLOCK(uart5_ipg_clk, 4, MXC_CCM_CCGR7, MXC_CCM_CCGRx_CG6_OFFSET,
+ NULL, NULL, &ipg_clk, &spba_clk);
DEFINE_CLOCK(uart1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG4_OFFSET,
NULL, NULL, &uart_root_clk, &uart1_ipg_clk);
DEFINE_CLOCK(uart2_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG6_OFFSET,
NULL, NULL, &uart_root_clk, &uart2_ipg_clk);
DEFINE_CLOCK(uart3_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG8_OFFSET,
NULL, NULL, &uart_root_clk, &uart3_ipg_clk);
+DEFINE_CLOCK(uart4_clk, 3, MXC_CCM_CCGR7, MXC_CCM_CCGRx_CG5_OFFSET,
+ NULL, NULL, &uart_root_clk, &uart4_ipg_clk);
+DEFINE_CLOCK(uart5_clk, 4, MXC_CCM_CCGR7, MXC_CCM_CCGRx_CG7_OFFSET,
+ NULL, NULL, &uart_root_clk, &uart5_ipg_clk);
/* GPT */
DEFINE_CLOCK(gpt_ipg_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG10_OFFSET,
NULL, NULL, &ipg_perclk, NULL);
DEFINE_CLOCK(hsi2c_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG11_OFFSET,
NULL, NULL, &ipg_clk, NULL);
+DEFINE_CLOCK(i2c3_mx53_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG11_OFFSET,
+ NULL, NULL, &ipg_perclk, NULL);
/* FEC */
DEFINE_CLOCK(fec_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG12_OFFSET,
_REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
_REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
+ _REGISTER_CLOCK("imx-uart.3", NULL, uart4_clk)
+ _REGISTER_CLOCK("imx-uart.4", NULL, uart5_clk)
_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
_REGISTER_CLOCK("fec.0", NULL, fec_clk)
_REGISTER_CLOCK(NULL, "iim_clk", iim_clk)
_REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
+ _REGISTER_CLOCK("imx-i2c.2", NULL, i2c3_mx53_clk)
_REGISTER_CLOCK("sdhci-esdhc-imx.0", NULL, esdhc1_clk)
_REGISTER_CLOCK("sdhci-esdhc-imx.1", NULL, esdhc2_mx53_clk)
_REGISTER_CLOCK("sdhci-esdhc-imx.2", NULL, esdhc3_mx53_clk)
_REGISTER_CLOCK("imx35-cspi.0", NULL, cspi_clk)
_REGISTER_CLOCK("imx2-wdt.0", NULL, dummy_clk)
_REGISTER_CLOCK("imx2-wdt.1", NULL, dummy_clk)
+ _REGISTER_CLOCK("imx-sdma", NULL, sdma_clk)
+ _REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
+ _REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
+ _REGISTER_CLOCK("imx-ssi.2", NULL, ssi3_clk)
+ _REGISTER_CLOCK("imx-keypad", NULL, dummy_clk)
};
static void clk_tree_init(void)
#define MXC_CCM_CCGR4 (MX51_CCM_BASE + 0x78)
#define MXC_CCM_CCGR5 (MX51_CCM_BASE + 0x7C)
#define MXC_CCM_CCGR6 (MX51_CCM_BASE + 0x80)
+#define MXC_CCM_CCGR7 (MX51_CCM_BASE + 0x84)
+
#define MXC_CCM_CMEOR (MX51_CCM_BASE + 0x84)
/* Define the bits in register CCR */
extern const struct imx_imx2_wdt_data imx53_imx2_wdt_data[];
#define imx53_add_imx2_wdt(id, pdata) \
imx_add_imx2_wdt(&imx53_imx2_wdt_data[id])
+
+extern const struct imx_imx_ssi_data imx53_imx_ssi_data[];
+#define imx53_add_imx_ssi(id, pdata) \
+ imx_add_imx_ssi(&imx53_imx_ssi_data[id], pdata)
+
+extern const struct imx_imx_keypad_data imx53_imx_keypad_data;
+#define imx53_add_imx_keypad(pdata) \
+ imx_add_imx_keypad(&imx53_imx_keypad_data, pdata)
#include <mach/hardware.h>
#include <mach/common.h>
+#include <mach/devices-common.h>
#include <mach/iomux-v3.h>
/*
tzic_init_irq(tzic_virt);
}
+static struct sdma_script_start_addrs imx51_sdma_script __initdata = {
+ .ap_2_ap_addr = 642,
+ .uart_2_mcu_addr = 817,
+ .mcu_2_app_addr = 747,
+ .mcu_2_shp_addr = 961,
+ .ata_2_mcu_addr = 1473,
+ .mcu_2_ata_addr = 1392,
+ .app_2_per_addr = 1033,
+ .app_2_mcu_addr = 683,
+ .shp_2_per_addr = 1251,
+ .shp_2_mcu_addr = 892,
+};
+
+static struct sdma_platform_data imx51_sdma_pdata __initdata = {
+ .sdma_version = 2,
+ .fw_name = "sdma-imx51.bin",
+ .script_addrs = &imx51_sdma_script,
+};
+
+static struct sdma_script_start_addrs imx53_sdma_script __initdata = {
+ .ap_2_ap_addr = 642,
+ .app_2_mcu_addr = 683,
+ .mcu_2_app_addr = 747,
+ .uart_2_mcu_addr = 817,
+ .shp_2_mcu_addr = 891,
+ .mcu_2_shp_addr = 960,
+ .uartsh_2_mcu_addr = 1032,
+ .spdif_2_mcu_addr = 1100,
+ .mcu_2_spdif_addr = 1134,
+ .firi_2_mcu_addr = 1193,
+ .mcu_2_firi_addr = 1290,
+};
+
+static struct sdma_platform_data imx53_sdma_pdata __initdata = {
+ .sdma_version = 2,
+ .fw_name = "sdma-imx53.bin",
+ .script_addrs = &imx53_sdma_script,
+};
+
void __init imx51_soc_init(void)
{
/* i.mx51 has the i.mx31 type gpio */
mxc_register_gpio("imx31-gpio", 1, MX51_GPIO2_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO2_LOW, MX51_MXC_INT_GPIO2_HIGH);
mxc_register_gpio("imx31-gpio", 2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO3_LOW, MX51_MXC_INT_GPIO3_HIGH);
mxc_register_gpio("imx31-gpio", 3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO4_LOW, MX51_MXC_INT_GPIO4_HIGH);
+
+ imx_add_imx_sdma(MX51_SDMA_BASE_ADDR, MX51_INT_SDMA, &imx51_sdma_pdata);
}
void __init imx53_soc_init(void)
mxc_register_gpio("imx31-gpio", 4, MX53_GPIO5_BASE_ADDR, SZ_16K, MX53_INT_GPIO5_LOW, MX53_INT_GPIO5_HIGH);
mxc_register_gpio("imx31-gpio", 5, MX53_GPIO6_BASE_ADDR, SZ_16K, MX53_INT_GPIO6_LOW, MX53_INT_GPIO6_HIGH);
mxc_register_gpio("imx31-gpio", 6, MX53_GPIO7_BASE_ADDR, SZ_16K, MX53_INT_GPIO7_LOW, MX53_INT_GPIO7_HIGH);
+
+ imx_add_imx_sdma(MX53_SDMA_BASE_ADDR, MX53_INT_SDMA, &imx53_sdma_pdata);
}
--- /dev/null
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <linux/suspend.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+#include <mach/system.h>
+#include "crm_regs.h"
+
+static struct clk *gpc_dvfs_clk;
+
+static int mx5_suspend_enter(suspend_state_t state)
+{
+ clk_enable(gpc_dvfs_clk);
+ switch (state) {
+ case PM_SUSPEND_MEM:
+ mx5_cpu_lp_set(STOP_POWER_OFF);
+ break;
+ case PM_SUSPEND_STANDBY:
+ mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (state == PM_SUSPEND_MEM) {
+ local_flush_tlb_all();
+ flush_cache_all();
+
+ /*clear the EMPGC0/1 bits */
+ __raw_writel(0, MXC_SRPG_EMPGC0_SRPGCR);
+ __raw_writel(0, MXC_SRPG_EMPGC1_SRPGCR);
+ }
+ cpu_do_idle();
+ clk_disable(gpc_dvfs_clk);
+
+ return 0;
+}
+
+static int mx5_pm_valid(suspend_state_t state)
+{
+ return (state > PM_SUSPEND_ON && state <= PM_SUSPEND_MAX);
+}
+
+static const struct platform_suspend_ops mx5_suspend_ops = {
+ .valid = mx5_pm_valid,
+ .enter = mx5_suspend_enter,
+};
+
+static int __init mx5_pm_init(void)
+{
+ if (gpc_dvfs_clk == NULL)
+ gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs");
+
+ if (!IS_ERR(gpc_dvfs_clk)) {
+ if (cpu_is_mx51())
+ suspend_set_ops(&mx5_suspend_ops);
+ } else
+ return -EPERM;
+
+ return 0;
+}
+device_initcall(mx5_pm_init);
config MACH_MX28EVK
bool "Support MX28EVK Platform"
select SOC_IMX28
+ select LEDS_GPIO_REGISTER
select MXS_HAVE_AMBA_DUART
select MXS_HAVE_PLATFORM_AUART
select MXS_HAVE_PLATFORM_FEC
select MXS_HAVE_PLATFORM_AUART
select MXS_HAVE_PLATFORM_FEC
select MXS_HAVE_PLATFORM_MXS_I2C
+ select MXS_HAVE_PLATFORM_MXS_MMC
select MXS_HAVE_PLATFORM_MXS_PWM
config MACH_TX28
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
+#include <linux/leds.h>
#include <linux/irq.h>
#include <linux/clk.h>
#define MX28EVK_FLEXCAN_SWITCH MXS_GPIO_NR(2, 13)
#define MX28EVK_FEC_PHY_POWER MXS_GPIO_NR(2, 15)
+#define MX28EVK_GPIO_LED MXS_GPIO_NR(3, 5)
#define MX28EVK_BL_ENABLE MXS_GPIO_NR(3, 18)
#define MX28EVK_LCD_ENABLE MXS_GPIO_NR(3, 30)
#define MX28EVK_FEC_PHY_RESET MXS_GPIO_NR(4, 13)
/* slot power enable */
MX28_PAD_PWM4__GPIO_3_29 |
(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+
+ /* led */
+ MX28_PAD_AUART1_TX__GPIO_3_5 | MXS_PAD_CTRL,
+};
+
+/* led */
+static const struct gpio_led mx28evk_leds[] __initconst = {
+ {
+ .name = "GPIO-LED",
+ .default_trigger = "heartbeat",
+ .gpio = MX28EVK_GPIO_LED,
+ },
+};
+
+static const struct gpio_led_platform_data mx28evk_led_data __initconst = {
+ .leds = mx28evk_leds,
+ .num_leds = ARRAY_SIZE(mx28evk_leds),
};
/* fec */
if (ret)
pr_warn("failed to request gpio mmc1-slot-power: %d\n", ret);
mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]);
+
+ gpio_led_register_device(0, &mx28evk_led_data);
}
static void __init mx28evk_timer_init(void)
},
};
+static struct mxs_mmc_platform_data tx28_mmc0_pdata __initdata = {
+ .wp_gpio = -EINVAL,
+ .flags = SLOTF_4_BIT_CAPABLE,
+};
+
static void __init tx28_stk5v3_init(void)
{
mxs_iomux_setup_multiple_pads(tx28_stk5v3_pads,
mx28_add_mxs_i2c(0);
i2c_register_board_info(0, tx28_stk5v3_i2c_boardinfo,
ARRAY_SIZE(tx28_stk5v3_i2c_boardinfo));
+ mx28_add_mxs_mmc(0, &tx28_mmc0_pdata);
}
static void __init tx28_timer_init(void)
.map_io = balloon3_map_io,
.nr_irqs = BALLOON3_NR_IRQS,
.init_irq = balloon3_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = balloon3_init,
.boot_params = PLAT_PHYS_OFFSET + 0x100,
.boot_params = 0xa0000100,
.map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
+ .handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
.init_machine = capc7117_init
MACHINE_END
}
EXPORT_SYMBOL(clk_get_rate);
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned long flags;
+ int ret = -EINVAL;
+
+ if (clk->ops->setrate) {
+ spin_lock_irqsave(&clocks_lock, flags);
+ ret = clk->ops->setrate(clk, rate);
+ spin_unlock_irqrestore(&clocks_lock, flags);
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
void clk_dummy_enable(struct clk *clk)
{
}
void (*enable)(struct clk *);
void (*disable)(struct clk *);
unsigned long (*getrate)(struct clk *);
+ int (*setrate)(struct clk *, unsigned long);
};
struct clk {
#include <asm/mach-types.h>
#include <asm/mach/map.h>
-#include <mach/pxa2xx-regs.h>
+#include <mach/pxa25x.h>
+#include <mach/pxa27x.h>
#include <mach/audio.h>
#include <mach/pxafb.h>
#include <mach/smemc.h>
.map_io = cmx2xx_map_io,
.nr_irqs = CMX2XX_NR_IRQS,
.init_irq = cmx2xx_init_irq,
+ /* NOTE: pxa25x_handle_irq() works on PXA27x w/o camera support */
+ .handle_irq = pxa25x_handle_irq,
.timer = &pxa_timer,
.init_machine = cmx2xx_init,
#ifdef CONFIG_PCI
.boot_params = 0xa0000100,
.map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
+ .handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
.init_machine = cm_x300_init,
.fixup = cm_x300_fixup,
.init_machine = colibri_pxa270_init,
.map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
MACHINE_END
.init_machine = colibri_pxa270_income_init,
.map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
MACHINE_END
.init_machine = colibri_pxa300_init,
.map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
+ .handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
MACHINE_END
#include <asm/mach/arch.h>
#include <asm/mach/irq.h>
-#include <mach/pxa3xx-regs.h>
-#include <mach/mfp-pxa320.h>
+#include <mach/pxa320.h>
#include <mach/colibri.h>
#include <mach/pxafb.h>
#include <mach/ohci.h>
.init_machine = colibri_pxa320_init,
.map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
+ .handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
MACHINE_END
.fixup = fixup_corgi,
.map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
+ .handle_irq = pxa25x_handle_irq,
.init_machine = corgi_init,
.timer = &pxa_timer,
MACHINE_END
.fixup = fixup_corgi,
.map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
+ .handle_irq = pxa25x_handle_irq,
.init_machine = corgi_init,
.timer = &pxa_timer,
MACHINE_END
.fixup = fixup_corgi,
.map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
+ .handle_irq = pxa25x_handle_irq,
.init_machine = corgi_init,
.timer = &pxa_timer,
MACHINE_END
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/csb726.h>
-#include <mach/mfp-pxa27x.h>
+#include <mach/pxa27x.h>
#include <mach/mmc.h>
#include <mach/ohci.h>
-#include <mach/pxa2xx-regs.h>
#include <mach/audio.h>
#include <mach/smemc.h>
.boot_params = 0xa0000100,
.map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.init_machine = csb726_init,
.timer = &pxa_timer,
MACHINE_END
.boot_params = 0xa0000100,
.map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = em_x270_init,
MACHINE_END
.boot_params = 0xa0000100,
.map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = em_x270_init,
MACHINE_END
.map_io = pxa25x_map_io,
.nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
+ .handle_irq = pxa25x_handle_irq,
.fixup = eseries_fixup,
.init_machine = e330_init,
.timer = &pxa_timer,
.map_io = pxa25x_map_io,
.nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
+ .handle_irq = pxa25x_handle_irq,
.fixup = eseries_fixup,
.init_machine = e350_init,
.timer = &pxa_timer,
.map_io = pxa25x_map_io,
.nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
+ .handle_irq = pxa25x_handle_irq,
.fixup = eseries_fixup,
.init_machine = e400_init,
.timer = &pxa_timer,
.map_io = pxa25x_map_io,
.nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
+ .handle_irq = pxa25x_handle_irq,
.fixup = eseries_fixup,
.init_machine = e740_init,
.timer = &pxa_timer,
.map_io = pxa25x_map_io,
.nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
+ .handle_irq = pxa25x_handle_irq,
.fixup = eseries_fixup,
.init_machine = e750_init,
.timer = &pxa_timer,
.map_io = pxa25x_map_io,
.nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
+ .handle_irq = pxa25x_handle_irq,
.fixup = eseries_fixup,
.init_machine = e800_init,
.timer = &pxa_timer,
.map_io = pxa27x_map_io,
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = a780_init,
MACHINE_END
.map_io = pxa27x_map_io,
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = e680_init,
MACHINE_END
.map_io = pxa27x_map_io,
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = a1200_init,
MACHINE_END
.map_io = pxa27x_map_io,
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = a910_init,
MACHINE_END
.map_io = pxa27x_map_io,
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = e6_init,
MACHINE_END
.map_io = pxa27x_map_io,
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = e2_init,
MACHINE_END
struct sys_timer;
extern struct sys_timer pxa_timer;
-extern void __init pxa_init_irq(int irq_nr,
- int (*set_wake)(struct irq_data *,
- unsigned int));
-extern void __init pxa25x_init_irq(void);
-#ifdef CONFIG_CPU_PXA26x
-extern void __init pxa26x_init_irq(void);
-#endif
-extern void __init pxa27x_init_irq(void);
-extern void __init pxa3xx_init_irq(void);
-extern void __init pxa95x_init_irq(void);
extern void __init pxa_map_io(void);
-extern void __init pxa25x_map_io(void);
-extern void __init pxa27x_map_io(void);
-extern void __init pxa3xx_map_io(void);
extern unsigned int get_clk_frequency_khz(int info);
.boot_params = 0xa0000100, /* match u-boot bi_boot_params */
.map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
+ .handle_irq = pxa25x_handle_irq,
.timer = &pxa_timer,
.init_machine = gumstix_init,
MACHINE_END
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include <asm/irq.h>
#include <mach/pxa25x.h>
#include <mach/h5000.h>
.boot_params = 0xa0000100,
.map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
+ .handle_irq = pxa25x_handle_irq,
.timer = &pxa_timer,
.init_machine = h5000_init,
MACHINE_END
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <mach/mfp-pxa25x.h>
-#include <mach/hardware.h>
+#include <mach/pxa25x.h>
#include "generic.h"
.boot_params = 0xa0000100,
.map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
+ .handle_irq = pxa25x_handle_irq,
.init_machine = himalaya_init,
.timer = &pxa_timer,
MACHINE_END
.map_io = pxa27x_map_io,
.nr_irqs = HX4700_NR_IRQS,
.init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.init_machine = hx4700_init,
.timer = &pxa_timer,
MACHINE_END
.boot_params = 0xa0000100,
.map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
+ .handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
.init_machine = icontrol_init
MACHINE_END
/* Maintainer: Vibren Technologies */
.map_io = idp_map_io,
.init_irq = pxa25x_init_irq,
+ .handle_irq = pxa25x_handle_irq,
.timer = &pxa_timer,
.init_machine = idp_init,
MACHINE_END
#define NR_IRQS (IRQ_BOARD_START)
+#ifndef __ASSEMBLY__
+struct irq_data;
+struct pt_regs;
+
+void pxa_mask_irq(struct irq_data *);
+void pxa_unmask_irq(struct irq_data *);
+void icip_handle_irq(struct pt_regs *);
+void ichp_handle_irq(struct pt_regs *);
+
+void pxa_init_irq(int irq_nr, int (*set_wake)(struct irq_data *, unsigned int));
+#endif
+
#endif /* __ASM_MACH_IRQS_H */
#include <mach/hardware.h>
#include <mach/pxa2xx-regs.h>
#include <mach/mfp-pxa25x.h>
+#include <mach/irqs.h>
+
+extern void __init pxa25x_map_io(void);
+extern void __init pxa25x_init_irq(void);
+#ifdef CONFIG_CPU_PXA26x
+extern void __init pxa26x_init_irq(void);
+#endif
+
+#define pxa25x_handle_irq icip_handle_irq
#endif /* __MACH_PXA25x_H */
#include <mach/hardware.h>
#include <mach/pxa2xx-regs.h>
#include <mach/mfp-pxa27x.h>
+#include <mach/irqs.h>
#define ARB_CNTRL __REG(0x48000048) /* Arbiter Control Register */
#define ARB_CORE_PARK (1<<24) /* Be parked with core when idle */
#define ARB_LOCK_FLAG (1<<23) /* Only Locking masters gain access to the bus */
+extern void __init pxa27x_map_io(void);
+extern void __init pxa27x_init_irq(void);
extern int __init pxa27x_set_pwrmode(unsigned int mode);
+#define pxa27x_handle_irq ichp_handle_irq
+
#endif /* __MACH_PXA27x_H */
#ifndef __MACH_PXA300_H
#define __MACH_PXA300_H
-#include <mach/hardware.h>
-#include <mach/pxa3xx-regs.h>
+#include <mach/pxa3xx.h>
#include <mach/mfp-pxa300.h>
#endif /* __MACH_PXA300_H */
#ifndef __MACH_PXA320_H
#define __MACH_PXA320_H
-#include <mach/hardware.h>
-#include <mach/pxa3xx-regs.h>
+#include <mach/pxa3xx.h>
#include <mach/mfp-pxa320.h>
#endif /* __MACH_PXA320_H */
--- /dev/null
+#ifndef __MACH_PXA3XX_H
+#define __MACH_PXA3XX_H
+
+#include <mach/hardware.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/irqs.h>
+
+extern void __init pxa3xx_map_io(void);
+extern void __init pxa3xx_init_irq(void);
+extern void __init pxa95x_init_irq(void);
+
+#define pxa3xx_handle_irq ichp_handle_irq
+
+#endif /* __MACH_PXA3XX_H */
#ifndef __MACH_PXA930_H
#define __MACH_PXA930_H
-#include <mach/hardware.h>
-#include <mach/pxa3xx-regs.h>
+#include <mach/pxa3xx.h>
#include <mach/mfp-pxa930.h>
#endif /* __MACH_PXA930_H */
+++ /dev/null
-#ifndef __ASM_MACH_REGS_INTC_H
-#define __ASM_MACH_REGS_INTC_H
-
-#include <mach/hardware.h>
-
-/*
- * Interrupt Controller
- */
-
-#define ICIP __REG(0x40D00000) /* Interrupt Controller IRQ Pending Register */
-#define ICMR __REG(0x40D00004) /* Interrupt Controller Mask Register */
-#define ICLR __REG(0x40D00008) /* Interrupt Controller Level Register */
-#define ICFP __REG(0x40D0000C) /* Interrupt Controller FIQ Pending Register */
-#define ICPR __REG(0x40D00010) /* Interrupt Controller Pending Register */
-#define ICCR __REG(0x40D00014) /* Interrupt Controller Control Register */
-#define ICHP __REG(0x40D00018) /* Interrupt Controller Highest Priority Register */
-
-#define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */
-#define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */
-#define ICLR2 __REG(0x40D000A4) /* Interrupt Controller Level Register 2 */
-#define ICFP2 __REG(0x40D000A8) /* Interrupt Controller FIQ Pending Register 2 */
-#define ICPR2 __REG(0x40D000AC) /* Interrupt Controller Pending Register 2 */
-
-#define ICIP3 __REG(0x40D00130) /* Interrupt Controller IRQ Pending Register 3 */
-#define ICMR3 __REG(0x40D00134) /* Interrupt Controller Mask Register 3 */
-#define ICLR3 __REG(0x40D00138) /* Interrupt Controller Level Register 3 */
-#define ICFP3 __REG(0x40D0013C) /* Interrupt Controller FIQ Pending Register 3 */
-#define ICPR3 __REG(0x40D00140) /* Interrupt Controller Pending Register 3 */
-
-#endif /* __ASM_MACH_REGS_INTC_H */
#define IPR(i) (((i) < 32) ? (0x01c + ((i) << 2)) : \
((i) < 64) ? (0x0b0 + (((i) - 32) << 2)) : \
(0x144 + (((i) - 64) << 2)))
+#define ICHP_VAL_IRQ (1 << 31)
+#define ICHP_IRQ(i) (((i) >> 16) & 0x7fff)
#define IPR_VALID (1 << 31)
#define IRQ_BIT(n) (((n) - PXA_IRQ(0)) & 0x1f)
return (void __iomem *)io_p2v(phys_base[i]);
}
-static void pxa_mask_irq(struct irq_data *d)
+void pxa_mask_irq(struct irq_data *d)
{
void __iomem *base = irq_data_get_irq_chip_data(d);
uint32_t icmr = __raw_readl(base + ICMR);
__raw_writel(icmr, base + ICMR);
}
-static void pxa_unmask_irq(struct irq_data *d)
+void pxa_unmask_irq(struct irq_data *d)
{
void __iomem *base = irq_data_get_irq_chip_data(d);
uint32_t icmr = __raw_readl(base + ICMR);
.irq_set_type = pxa_set_low_gpio_type,
};
+asmlinkage void __exception_irq_entry icip_handle_irq(struct pt_regs *regs)
+{
+ uint32_t icip, icmr, mask;
+
+ do {
+ icip = __raw_readl(IRQ_BASE + ICIP);
+ icmr = __raw_readl(IRQ_BASE + ICMR);
+ mask = icip & icmr;
+
+ if (mask == 0)
+ break;
+
+ handle_IRQ(PXA_IRQ(fls(mask) - 1), regs);
+ } while (1);
+}
+
+asmlinkage void __exception_irq_entry ichp_handle_irq(struct pt_regs *regs)
+{
+ uint32_t ichp;
+
+ do {
+ __asm__ __volatile__("mrc p6, 0, %0, c5, c0, 0\n": "=r"(ichp));
+
+ if ((ichp & ICHP_VAL_IRQ) == 0)
+ break;
+
+ handle_IRQ(PXA_IRQ(ICHP_IRQ(ichp)), regs);
+ } while (1);
+}
+
static void __init pxa_init_low_gpio_irq(set_wake_t fn)
{
int irq;
.map_io = pxa3xx_map_io,
.nr_irqs = LITTLETON_NR_IRQS,
.init_irq = pxa3xx_init_irq,
+ .handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
.init_machine = littleton_init,
MACHINE_END
.map_io = lpd270_map_io,
.nr_irqs = LPD270_NR_IRQS,
.init_irq = lpd270_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = lpd270_init,
MACHINE_END
.map_io = lubbock_map_io,
.nr_irqs = LUBBOCK_NR_IRQS,
.init_irq = lubbock_init_irq,
+ .handle_irq = pxa25x_handle_irq,
.timer = &pxa_timer,
.init_machine = lubbock_init,
MACHINE_END
.map_io = pxa27x_map_io,
.nr_irqs = MAGICIAN_NR_IRQS,
.init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.init_machine = magician_init,
.timer = &pxa_timer,
MACHINE_END
.map_io = mainstone_map_io,
.nr_irqs = MAINSTONE_NR_IRQS,
.init_irq = mainstone_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = mainstone_init,
MACHINE_END
.boot_params = 0xa0000100,
.map_io = &pxa27x_map_io,
.init_irq = &pxa27x_init_irq,
+ .handle_irq = &pxa27x_handle_irq,
.init_machine = mioa701_machine_init,
.timer = &pxa_timer,
MACHINE_END
.timer = &pxa_timer,
.map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
+ .handle_irq = pxa25x_handle_irq,
.init_machine = mp900c_init,
MACHINE_END
.boot_params = 0xa0000100,
.map_io = palmld_map_io,
.init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = palmld_init
MACHINE_END
.map_io = pxa27x_map_io,
.reserve = palmt5_reserve,
.init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = palmt5_init
MACHINE_END
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include <mach/pxa25x.h>
#include <mach/audio.h>
#include <mach/palmtc.h>
#include <mach/mmc.h>
#include <mach/pxafb.h>
-#include <mach/mfp-pxa25x.h>
#include <mach/irda.h>
#include <mach/udc.h>
-#include <mach/pxa2xx-regs.h>
#include "generic.h"
#include "devices.h"
.boot_params = 0xa0000100,
.map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
+ .handle_irq = pxa25x_handle_irq,
.timer = &pxa_timer,
.init_machine = palmtc_init
MACHINE_END
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include <mach/pxa25x.h>
#include <mach/audio.h>
#include <mach/palmte2.h>
#include <mach/mmc.h>
#include <mach/pxafb.h>
-#include <mach/mfp-pxa25x.h>
#include <mach/irda.h>
#include <mach/udc.h>
#include <mach/palmasoc.h>
.boot_params = 0xa0000100,
.map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
+ .handle_irq = pxa25x_handle_irq,
.timer = &pxa_timer,
.init_machine = palmte2_init
MACHINE_END
.map_io = pxa27x_map_io,
.reserve = treo_reserve,
.init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = treo680_init,
MACHINE_END
.map_io = pxa27x_map_io,
.reserve = treo_reserve,
.init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = centro_init,
MACHINE_END
.boot_params = 0xa0000100,
.map_io = palmtx_map_io,
.init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = palmtx_init
MACHINE_END
.boot_params = 0xa0000100,
.map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = palmz72_init
MACHINE_END
.map_io = pcm027_map_io,
.nr_irqs = PCM027_NR_IRQS,
.init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = pcm027_init,
MACHINE_END
.map_io = pxa25x_map_io,
.nr_irqs = POODLE_NR_IRQS, /* 4 for LoCoMo */
.init_irq = pxa25x_init_irq,
+ .handle_irq = pxa25x_handle_irq,
.timer = &pxa_timer,
.init_machine = poodle_init,
MACHINE_END
#include <mach/ohci.h>
#include <mach/pm.h>
#include <mach/dma.h>
-#include <mach/regs-intc.h>
#include <mach/smemc.h>
#include "generic.h"
static void pxa_mask_ext_wakeup(struct irq_data *d)
{
- ICMR2 &= ~(1 << ((d->irq - PXA_IRQ(0)) & 0x1f));
+ pxa_mask_irq(d);
PECR &= ~PECR_IE(d->irq - IRQ_WAKEUP0);
}
static void pxa_unmask_ext_wakeup(struct irq_data *d)
{
- ICMR2 |= 1 << ((d->irq - PXA_IRQ(0)) & 0x1f);
+ pxa_unmask_irq(d);
PECR |= PECR_IE(d->irq - IRQ_WAKEUP0);
}
#include <mach/reset.h>
#include <mach/pm.h>
#include <mach/dma.h>
-#include <mach/regs-intc.h>
#include "generic.h"
#include "devices.h"
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <mach/hardware.h>
-#include <mach/pxa3xx-regs.h>
-#include <mach/mfp-pxa3xx.h>
-#include <mach/mfp-pxa300.h>
+#include <mach/pxa300.h>
#include <mach/ohci.h>
#include <mach/pxafb.h>
#include <mach/mmc.h>
.init_machine = raumfeld_controller_init,
.map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
+ .handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
MACHINE_END
#endif
.init_machine = raumfeld_connector_init,
.map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
+ .handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
MACHINE_END
#endif
.init_machine = raumfeld_speaker_init,
.map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
+ .handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
MACHINE_END
#endif
.boot_params = 0xa0000100,
.map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
+ .handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
.init_machine = saar_init,
MACHINE_END
.map_io = pxa3xx_map_io,
.nr_irqs = SAARB_NR_IRQS,
.init_irq = pxa95x_init_irq,
+ .handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
.init_machine = saarb_init,
MACHINE_END
.fixup = spitz_fixup,
.map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.init_machine = spitz_init,
.timer = &pxa_timer,
MACHINE_END
.fixup = spitz_fixup,
.map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.init_machine = spitz_init,
.timer = &pxa_timer,
MACHINE_END
.fixup = spitz_fixup,
.map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.init_machine = spitz_init,
.timer = &pxa_timer,
MACHINE_END
MACHINE_START(INTELMOTE2, "IMOTE 2")
.map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = imote2_init,
.boot_params = 0xA0000100,
.map_io = pxa27x_map_io,
.nr_irqs = STARGATE_NR_IRQS,
.init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = stargate2_init,
.boot_params = 0xA0000100,
.boot_params = 0xa0000100,
.map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
+ .handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
.init_machine = tavorevb_init,
MACHINE_END
.map_io = pxa3xx_map_io,
.nr_irqs = TAVOREVB3_NR_IRQS,
.init_irq = pxa3xx_init_irq,
+ .handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
.init_machine = evb3_init,
MACHINE_END
.map_io = pxa25x_map_io,
.nr_irqs = TOSA_NR_IRQS,
.init_irq = pxa25x_init_irq,
+ .handle_irq = pxa25x_handle_irq,
.init_machine = tosa_init,
.timer = &pxa_timer,
MACHINE_END
.init_machine = trizeps4_init,
.map_io = trizeps4_map_io,
.init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
MACHINE_END
.init_machine = trizeps4_init,
.map_io = trizeps4_map_io,
.init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
MACHINE_END
.boot_params = 0xa0000100,
.map_io = viper_map_io,
.init_irq = viper_init_irq,
+ .handle_irq = pxa25x_handle_irq,
.timer = &pxa_timer,
.init_machine = viper_init,
MACHINE_END
.boot_params = 0xa0000100,
.map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = vpac270_init
MACHINE_END
#include <asm/mach/map.h>
#include <mach/hardware.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa25x.h>
+#include <mach/pxa25x.h>
#include <mach/smemc.h>
#include "generic.h"
.init_machine = xcep_init,
.map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
+ .handle_irq = pxa25x_handle_irq,
.timer = &pxa_timer,
MACHINE_END
#include <mach/pxafb.h>
#include <mach/mmc.h>
#include <plat/pxa27x_keypad.h>
+#include <mach/pm.h>
#include "generic.h"
#include "devices.h"
static inline void z2_pmic_init(void) {}
#endif
+#ifdef CONFIG_PM
+static void z2_power_off(void)
+{
+ /* We're using deep sleep as poweroff, so clear PSPR to ensure that
+ * bootloader will jump to its entry point in resume handler
+ */
+ PSPR = 0x0;
+ local_irq_disable();
+ pxa27x_cpu_suspend(PWRMODE_DEEPSLEEP, PLAT_PHYS_OFFSET - PAGE_OFFSET);
+}
+#else
+#define z2_power_off NULL
+#endif
+
/******************************************************************************
* Machine init
******************************************************************************/
z2_leds_init();
z2_keys_init();
z2_pmic_init();
+
+ pm_power_off = z2_power_off;
}
MACHINE_START(ZIPIT2, "Zipit Z2")
.boot_params = 0xa0000100,
.map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = z2_init,
MACHINE_END
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/pxa2xx-regs.h>
+#include <mach/pxa27x.h>
#include <mach/regs-uart.h>
#include <mach/ohci.h>
#include <mach/mmc.h>
#include <mach/pxa27x-udc.h>
#include <mach/udc.h>
#include <mach/pxafb.h>
-#include <mach/mfp-pxa27x.h>
#include <mach/pm.h>
#include <mach/audio.h>
#include <mach/arcom-pcmcia.h>
.map_io = zeus_map_io,
.nr_irqs = ZEUS_NR_IRQS,
.init_irq = zeus_init_irq,
+ .handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = zeus_init,
MACHINE_END
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <mach/hardware.h>
+#include <mach/pxa3xx.h>
#include <mach/audio.h>
#include <mach/pxafb.h>
#include <mach/zylonite.h>
.map_io = pxa3xx_map_io,
.nr_irqs = ZYLONITE_NR_IRQS,
.init_irq = pxa3xx_init_irq,
+ .handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
.init_machine = zylonite_init,
MACHINE_END
struct pm_uart_save *save)
{
}
+
+static inline void s3c_pm_restored_gpios(void) { }
+static inline void s3c_pm_saved_gpios(void) { }
/* Compatibility */
#define IRQ_ONENAND IRQ_ONENAND0
+#define IRQ_I2S0 IRQ_S3C6410_IIS
#endif /* __ASM_MACH_S3C64XX_IRQS_H */
* the IRQ wake controls depending on the CPU we are running on */
#define s3c_irqwake_eintallow ((1 << 28) - 1)
-#define s3c_irqwake_intallow (0)
+#define s3c_irqwake_intallow (~0)
static inline void s3c_pm_arch_update_uart(void __iomem *regs,
struct pm_uart_save *save)
save->ucon = new_ucon;
}
}
+
+static inline void s3c_pm_restored_gpios(void)
+{
+ /* ensure sleep mode has been cleared from the system */
+
+ __raw_writel(0, S3C64XX_SLPEN);
+}
+
+static inline void s3c_pm_saved_gpios(void)
+{
+ /* turn on the sleep mode and keep it there, as it seems that during
+ * suspend the xCON registers get re-set and thus you can end up with
+ * problems between going to sleep and resuming.
+ */
+
+ __raw_writel(S3C64XX_SLPEN_USE_xSLP, S3C64XX_SLPEN);
+}
},
};
+/* setup the sources the vic should advertise resume for, even though it
+ * is not doing the wake (set_irq_wake needs to be valid) */
+#define IRQ_VIC0_RESUME (1 << (IRQ_RTC_TIC - IRQ_VIC0_BASE))
+#define IRQ_VIC1_RESUME (1 << (IRQ_RTC_ALARM - IRQ_VIC1_BASE) | \
+ 1 << (IRQ_PENDN - IRQ_VIC1_BASE) | \
+ 1 << (IRQ_HSMMC0 - IRQ_VIC1_BASE) | \
+ 1 << (IRQ_HSMMC1 - IRQ_VIC1_BASE) | \
+ 1 << (IRQ_HSMMC2 - IRQ_VIC1_BASE))
void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid)
{
printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
/* initialise the pair of VICs */
- vic_init(VA_VIC0, IRQ_VIC0_BASE, vic0_valid, 0);
- vic_init(VA_VIC1, IRQ_VIC1_BASE, vic1_valid, 0);
+ vic_init(VA_VIC0, IRQ_VIC0_BASE, vic0_valid, IRQ_VIC0_RESUME);
+ vic_init(VA_VIC1, IRQ_VIC1_BASE, vic1_valid, IRQ_VIC1_RESUME);
/* add the timer sub-irqs */
s3c_init_vic_timer_irq(5, IRQ_TIMER0);
# Core support for S5P64X0 system
obj-$(CONFIG_ARCH_S5P64X0) += cpu.o init.o clock.o dma.o gpiolib.o
-obj-$(CONFIG_ARCH_S5P64X0) += setup-i2c0.o
+obj-$(CONFIG_ARCH_S5P64X0) += setup-i2c0.o irq-eint.o
obj-$(CONFIG_CPU_S5P6440) += clock-s5p6440.o
obj-$(CONFIG_CPU_S5P6450) += clock-s5p6450.o
#define IRQ_S3CUART_RX4 IRQ_S5P_UART_RX4
#define IRQ_S3CUART_RX5 IRQ_S5P_UART_RX5
+#define IRQ_I2S0 IRQ_I2SV40
+
/* S5P6450 EINT feature will be added */
/*
#define S5P6450_GPQ_BASE (S5P_VA_GPIO + 0x0180)
#define S5P6450_GPS_BASE (S5P_VA_GPIO + 0x0300)
+/* External interrupt control registers for group0 */
+
+#define EINT0CON0_OFFSET (0x900)
+#define EINT0MASK_OFFSET (0x920)
+#define EINT0PEND_OFFSET (0x924)
+
+#define S5P64X0_EINT0CON0 (S5P_VA_GPIO + EINT0CON0_OFFSET)
+#define S5P64X0_EINT0MASK (S5P_VA_GPIO + EINT0MASK_OFFSET)
+#define S5P64X0_EINT0PEND (S5P_VA_GPIO + EINT0PEND_OFFSET)
+
#endif /* __ASM_ARCH_REGS_GPIO_H */
--- /dev/null
+/* arch/arm/mach-s5p64x0/irq-eint.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd
+ * http://www.samsung.com/
+ *
+ * Based on linux/arch/arm/mach-s3c64xx/irq-eint.c
+ *
+ * S5P64X0 - Interrupt handling for External Interrupts.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <plat/regs-irqtype.h>
+#include <plat/gpio-cfg.h>
+
+#include <mach/regs-gpio.h>
+#include <mach/regs-clock.h>
+
+#define eint_offset(irq) ((irq) - IRQ_EINT(0))
+
+static int s5p64x0_irq_eint_set_type(struct irq_data *data, unsigned int type)
+{
+ int offs = eint_offset(data->irq);
+ int shift;
+ u32 ctrl, mask;
+ u32 newvalue = 0;
+
+ if (offs > 15)
+ return -EINVAL;
+
+ switch (type) {
+ case IRQ_TYPE_NONE:
+ printk(KERN_WARNING "No edge setting!\n");
+ break;
+ case IRQ_TYPE_EDGE_RISING:
+ newvalue = S3C2410_EXTINT_RISEEDGE;
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ newvalue = S3C2410_EXTINT_FALLEDGE;
+ break;
+ case IRQ_TYPE_EDGE_BOTH:
+ newvalue = S3C2410_EXTINT_BOTHEDGE;
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ newvalue = S3C2410_EXTINT_LOWLEV;
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ newvalue = S3C2410_EXTINT_HILEV;
+ break;
+ default:
+ printk(KERN_ERR "No such irq type %d", type);
+ return -EINVAL;
+ }
+
+ shift = (offs / 2) * 4;
+ mask = 0x7 << shift;
+
+ ctrl = __raw_readl(S5P64X0_EINT0CON0) & ~mask;
+ ctrl |= newvalue << shift;
+ __raw_writel(ctrl, S5P64X0_EINT0CON0);
+
+ /* Configure the GPIO pin for 6450 or 6440 based on CPU ID */
+ if (0x50000 == (__raw_readl(S5P64X0_SYS_ID) & 0xFF000))
+ s3c_gpio_cfgpin(S5P6450_GPN(offs), S3C_GPIO_SFN(2));
+ else
+ s3c_gpio_cfgpin(S5P6440_GPN(offs), S3C_GPIO_SFN(2));
+
+ return 0;
+}
+
+/*
+ * s5p64x0_irq_demux_eint
+ *
+ * This function demuxes the IRQ from the group0 external interrupts,
+ * from IRQ_EINT(0) to IRQ_EINT(15). It is designed to be inlined into
+ * the specific handlers s5p64x0_irq_demux_eintX_Y.
+ */
+static inline void s5p64x0_irq_demux_eint(unsigned int start, unsigned int end)
+{
+ u32 status = __raw_readl(S5P64X0_EINT0PEND);
+ u32 mask = __raw_readl(S5P64X0_EINT0MASK);
+ unsigned int irq;
+
+ status &= ~mask;
+ status >>= start;
+ status &= (1 << (end - start + 1)) - 1;
+
+ for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) {
+ if (status & 1)
+ generic_handle_irq(irq);
+ status >>= 1;
+ }
+}
+
+static void s5p64x0_irq_demux_eint0_3(unsigned int irq, struct irq_desc *desc)
+{
+ s5p64x0_irq_demux_eint(0, 3);
+}
+
+static void s5p64x0_irq_demux_eint4_11(unsigned int irq, struct irq_desc *desc)
+{
+ s5p64x0_irq_demux_eint(4, 11);
+}
+
+static void s5p64x0_irq_demux_eint12_15(unsigned int irq,
+ struct irq_desc *desc)
+{
+ s5p64x0_irq_demux_eint(12, 15);
+}
+
+static int s5p64x0_alloc_gc(void)
+{
+ struct irq_chip_generic *gc;
+ struct irq_chip_type *ct;
+
+ gc = irq_alloc_generic_chip("s5p64x0-eint", 1, S5P_IRQ_EINT_BASE,
+ S5P_VA_GPIO, handle_level_irq);
+ if (!gc) {
+ printk(KERN_ERR "%s: irq_alloc_generic_chip for group 0"
+ "external interrupts failed\n", __func__);
+ return -EINVAL;
+ }
+
+ ct = gc->chip_types;
+ ct->chip.irq_ack = irq_gc_ack;
+ ct->chip.irq_mask = irq_gc_mask_set_bit;
+ ct->chip.irq_unmask = irq_gc_mask_clr_bit;
+ ct->chip.irq_set_type = s5p64x0_irq_eint_set_type;
+ ct->regs.ack = EINT0PEND_OFFSET;
+ ct->regs.mask = EINT0MASK_OFFSET;
+ irq_setup_generic_chip(gc, IRQ_MSK(16), IRQ_GC_INIT_MASK_CACHE,
+ IRQ_NOREQUEST | IRQ_NOPROBE, 0);
+ return 0;
+}
+
+static int __init s5p64x0_init_irq_eint(void)
+{
+ int ret = s5p64x0_alloc_gc();
+ irq_set_chained_handler(IRQ_EINT0_3, s5p64x0_irq_demux_eint0_3);
+ irq_set_chained_handler(IRQ_EINT4_11, s5p64x0_irq_demux_eint4_11);
+ irq_set_chained_handler(IRQ_EINT12_15, s5p64x0_irq_demux_eint12_15);
+
+ return ret;
+}
+arch_initcall(s5p64x0_init_irq_eint);
select S3C_DEV_HSMMC2
select S3C_DEV_I2C1
select S3C_DEV_I2C2
+ select S5P_DEV_MFC
select S3C_DEV_USB_HSOTG
select S5P_DEV_ONENAND
select SAMSUNG_DEV_KEYPAD
.parent = &clk_hclk_dsys.clk,
.enable = s5pv210_clk_ip0_ctrl,
.ctrlbit = (1 << 26),
+ }, {
+ .name = "mfc",
+ .devname = "s5p-mfc",
+ .parent = &clk_pclk_psys.clk,
+ .enable = s5pv210_clk_ip0_ctrl,
+ .ctrlbit = (1 << 16),
}, {
.name = "otg",
.parent = &clk_hclk_psys.clk,
}, {
.clk = {
.name = "sclk_mfc",
+ .devname = "s5p-mfc",
.enable = s5pv210_clk_ip0_ctrl,
.ctrlbit = (1 << 16),
},
s5pv210_default_sdhci2();
s5pv210_default_sdhci3();
- s3c_adc_setname("s3c64xx-adc");
+ s3c_adc_setname("samsung-adc-v3");
s3c_cfcon_setname("s5pv210-pata");
#include <mach/map.h>
#include <mach/dma.h>
#include <mach/irqs.h>
+#include <mach/regs-audss.h>
static const char *rclksrc[] = {
[0] = "busclk",
.quirks = QUIRK_PRI_6CHAN | QUIRK_SEC_DAI
| QUIRK_NEED_RSTCLR,
.src_clk = rclksrc,
+ .idma_addr = S5PV210_AUDSS_INT_MEM,
},
},
};
#define S5PV210_PA_CFCON 0xE8200000
+#define S5PV210_PA_MFC 0xF1700000
+
#define S5PV210_PA_HSMMC(x) (0xEB000000 + ((x) * 0x100000))
#define S5PV210_PA_HSOTG 0xEC000000
#define S5P_PA_FIMC1 S5PV210_PA_FIMC1
#define S5P_PA_FIMC2 S5PV210_PA_FIMC2
#define S5P_PA_MIPI_CSIS0 S5PV210_PA_MIPI_CSIS
+#define S5P_PA_MFC S5PV210_PA_MFC
#define S5P_PA_ONENAND S5PC110_PA_ONENAND
#define S5P_PA_ONENAND_DMA S5PC110_PA_ONENAND_DMA
#define S5P_PA_SDRAM S5PV210_PA_SDRAM
{
/* nothing here yet */
}
+
+static inline void s3c_pm_restored_gpios(void) { }
+static inline void s3c_pm_saved_gpios(void) { }
--- /dev/null
+/* arch/arm/mach-s5pv210/include/mach/regs-audss.h
+ *
+ * Copyright (c) 2011 Samsung Electronics
+ * http://www.samsung.com
+ *
+ * S5PV210 Audio SubSystem clock register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_REGS_AUDSS_H
+#define __PLAT_REGS_AUDSS_H __FILE__
+
+#define S5PV210_AUDSS_INT_MEM (0xC0000000)
+
+#endif /* _PLAT_REGS_AUDSS_H */
#include <plat/sdhci.h>
#include <plat/clock.h>
#include <plat/s5p-time.h>
+#include <plat/mfc.h>
#include <plat/regs-fb-v4.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
&goni_i2c_gpio5,
&mmc2_fixed_voltage,
&goni_device_gpiokeys,
+ &s5p_device_mfc,
+ &s5p_device_mfc_l,
+ &s5p_device_mfc_r,
&s3c_device_i2c0,
&s5p_device_fimc0,
&s5p_device_fimc1,
s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
}
+static void __init goni_reserve(void)
+{
+ s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
+}
+
static void __init goni_machine_init(void)
{
/* Radio: call before I2C 1 registeration */
.map_io = goni_map_io,
.init_machine = goni_machine_init,
.timer = &s5p_timer,
+ .reserve = &goni_reserve,
MACHINE_END
&s5pv210_device_iis0,
&s5pv210_device_spdif,
&samsung_asoc_dma,
+ &samsung_asoc_idma,
&samsung_device_keypad,
&smdkv210_dm9000,
&smdkv210_lcd_lte480wv,
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/i2c.h>
-#include <linux/i2c-tegra.h>
#include <sound/wm8903.h>
},
};
-static struct tegra_i2c_platform_data harmony_i2c1_platform_data = {
- .bus_clk_rate = 400000,
-};
-
-static struct tegra_i2c_platform_data harmony_i2c2_platform_data = {
- .bus_clk_rate = 400000,
-};
-
-static struct tegra_i2c_platform_data harmony_i2c3_platform_data = {
- .bus_clk_rate = 400000,
-};
-
-static struct tegra_i2c_platform_data harmony_dvc_platform_data = {
- .bus_clk_rate = 400000,
-};
-
static struct wm8903_platform_data harmony_wm8903_pdata = {
.irq_active_low = 0,
.micdet_cfg = 0,
static void __init harmony_i2c_init(void)
{
- tegra_i2c_device1.dev.platform_data = &harmony_i2c1_platform_data;
- tegra_i2c_device2.dev.platform_data = &harmony_i2c2_platform_data;
- tegra_i2c_device3.dev.platform_data = &harmony_i2c3_platform_data;
- tegra_i2c_device4.dev.platform_data = &harmony_dvc_platform_data;
-
platform_device_register(&tegra_i2c_device1);
platform_device_register(&tegra_i2c_device2);
platform_device_register(&tegra_i2c_device3);
};
static struct tegra_gpio_table gpio_table[] = {
- { .gpio = TEGRA_GPIO_SD1_CD, .enable = true },
- { .gpio = TEGRA_GPIO_SD1_WP, .enable = true },
- { .gpio = TEGRA_GPIO_SD1_POWER, .enable = true },
- { .gpio = TEGRA_GPIO_SD4_CD, .enable = true },
- { .gpio = TEGRA_GPIO_SD4_WP, .enable = true },
- { .gpio = TEGRA_GPIO_SD4_POWER, .enable = true },
+ { .gpio = TEGRA_GPIO_SD1_CD, .enable = true },
+ { .gpio = TEGRA_GPIO_SD1_WP, .enable = true },
+ { .gpio = TEGRA_GPIO_SD1_POWER, .enable = true },
+ { .gpio = TEGRA_ULPI_RST, .enable = true },
};
void paz00_pinmux_init(void)
#include <linux/dma-mapping.h>
#include <linux/pda_power.h>
#include <linux/io.h>
+#include <linux/i2c.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/iomap.h>
#include <mach/irqs.h>
#include <mach/sdhci.h>
+#include <mach/gpio.h>
#include "board.h"
#include "board-paz00.h"
static struct platform_device *paz00_devices[] __initdata = {
&debug_uart,
&tegra_sdhci_device1,
- &tegra_sdhci_device2,
&tegra_sdhci_device4,
};
+static void paz00_i2c_init(void)
+{
+ platform_device_register(&tegra_i2c_device1);
+ platform_device_register(&tegra_i2c_device2);
+ platform_device_register(&tegra_i2c_device4);
+}
+
+static void paz00_usb_init(void)
+{
+ platform_device_register(&tegra_ehci2_device);
+ platform_device_register(&tegra_ehci3_device);
+}
+
static void __init tegra_paz00_fixup(struct machine_desc *desc,
struct tag *tags, char **cmdline, struct meminfo *mi)
{
{ NULL, NULL, 0, 0},
};
-
static struct tegra_sdhci_platform_data sdhci_pdata1 = {
.cd_gpio = TEGRA_GPIO_SD1_CD,
.wp_gpio = TEGRA_GPIO_SD1_WP,
.power_gpio = TEGRA_GPIO_SD1_POWER,
};
-static struct tegra_sdhci_platform_data sdhci_pdata2 = {
+static struct tegra_sdhci_platform_data sdhci_pdata4 = {
.cd_gpio = -1,
.wp_gpio = -1,
.power_gpio = -1,
-};
-
-static struct tegra_sdhci_platform_data sdhci_pdata4 = {
- .cd_gpio = TEGRA_GPIO_SD4_CD,
- .wp_gpio = TEGRA_GPIO_SD4_WP,
- .power_gpio = TEGRA_GPIO_SD4_POWER,
.is_8bit = 1,
};
paz00_pinmux_init();
tegra_sdhci_device1.dev.platform_data = &sdhci_pdata1;
- tegra_sdhci_device2.dev.platform_data = &sdhci_pdata2;
tegra_sdhci_device4.dev.platform_data = &sdhci_pdata4;
platform_add_devices(paz00_devices, ARRAY_SIZE(paz00_devices));
+
+ paz00_i2c_init();
+ paz00_usb_init();
}
-MACHINE_START(PAZ00, "paz00")
+MACHINE_START(PAZ00, "Toshiba AC100 / Dynabook AZ")
.boot_params = 0x00000100,
.fixup = tegra_paz00_fixup,
.map_io = tegra_map_common_io,
#ifndef _MACH_TEGRA_BOARD_PAZ00_H
#define _MACH_TEGRA_BOARD_PAZ00_H
-#define TEGRA_GPIO_SD1_CD TEGRA_GPIO_PV5
-#define TEGRA_GPIO_SD1_WP TEGRA_GPIO_PH1
-#define TEGRA_GPIO_SD1_POWER TEGRA_GPIO_PT3
-#define TEGRA_GPIO_SD4_CD TEGRA_GPIO_PH2
-#define TEGRA_GPIO_SD4_WP TEGRA_GPIO_PH3
-#define TEGRA_GPIO_SD4_POWER TEGRA_GPIO_PI6
+#define TEGRA_GPIO_SD1_CD TEGRA_GPIO_PV5
+#define TEGRA_GPIO_SD1_WP TEGRA_GPIO_PH1
+#define TEGRA_GPIO_SD1_POWER TEGRA_GPIO_PT3
+#define TEGRA_ULPI_RST TEGRA_GPIO_PV0
void paz00_pinmux_init(void);
#include <linux/platform_device.h>
#include <linux/serial_8250.h>
#include <linux/i2c.h>
-#include <linux/i2c-tegra.h>
#include <linux/delay.h>
#include <linux/input.h>
#include <linux/io.h>
{ NULL, NULL, 0, 0},
};
-static struct tegra_i2c_platform_data seaboard_i2c1_platform_data = {
- .bus_clk_rate = 400000.
-};
-
-static struct tegra_i2c_platform_data seaboard_i2c2_platform_data = {
- .bus_clk_rate = 400000,
-};
-
-static struct tegra_i2c_platform_data seaboard_i2c3_platform_data = {
- .bus_clk_rate = 400000,
-};
-
-static struct tegra_i2c_platform_data seaboard_dvc_platform_data = {
- .bus_clk_rate = 400000,
-};
-
static struct gpio_keys_button seaboard_gpio_keys_buttons[] = {
{
.code = SW_LID,
static struct platform_device *seaboard_devices[] __initdata = {
&debug_uart,
&tegra_pmu_device,
- &tegra_sdhci_device1,
- &tegra_sdhci_device3,
&tegra_sdhci_device4,
+ &tegra_sdhci_device3,
+ &tegra_sdhci_device1,
&seaboard_gpio_keys_device,
};
i2c_register_board_info(3, &adt7461_device, 1);
- tegra_i2c_device1.dev.platform_data = &seaboard_i2c1_platform_data;
- tegra_i2c_device2.dev.platform_data = &seaboard_i2c2_platform_data;
- tegra_i2c_device3.dev.platform_data = &seaboard_i2c3_platform_data;
- tegra_i2c_device4.dev.platform_data = &seaboard_dvc_platform_data;
-
platform_device_register(&tegra_i2c_device1);
platform_device_register(&tegra_i2c_device2);
platform_device_register(&tegra_i2c_device3);
{TEGRA_PINGROUP_ATC, TEGRA_MUX_NAND, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_ATD, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_ATE, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
- {TEGRA_PINGROUP_CDEV1, TEGRA_MUX_OSC, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
+ {TEGRA_PINGROUP_CDEV1, TEGRA_MUX_PLLA_OUT, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_CDEV2, TEGRA_MUX_PLLP_OUT4, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_CRTP, TEGRA_MUX_CRT, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_CSUS, TEGRA_MUX_VI_SENSOR_CLK, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_SPIH, TEGRA_MUX_SPI2_ALT, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_UAA, TEGRA_MUX_ULPI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_UAB, TEGRA_MUX_ULPI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE},
- {TEGRA_PINGROUP_UAC, TEGRA_MUX_RSVD2, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
+ {TEGRA_PINGROUP_UAC, TEGRA_MUX_RSVD2, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_UAD, TEGRA_MUX_IRDA, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_UCA, TEGRA_MUX_UARTC, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_UCB, TEGRA_MUX_UARTC, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE},
static struct tegra_gpio_table gpio_table[] = {
{ .gpio = TRIMSLICE_GPIO_SD4_CD, .enable = true }, /* mmc4 cd */
{ .gpio = TRIMSLICE_GPIO_SD4_WP, .enable = true }, /* mmc4 wp */
+
+ { .gpio = TRIMSLICE_GPIO_USB1_MODE, .enable = true }, /* USB1 mode */
+ { .gpio = TRIMSLICE_GPIO_USB2_RST, .enable = true }, /* USB2 PHY rst */
};
void __init trimslice_pinmux_init(void)
#include <linux/platform_device.h>
#include <linux/serial_8250.h>
#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/iomap.h>
#include <mach/sdhci.h>
+#include <mach/gpio.h>
#include "board.h"
#include "clock.h"
.power_gpio = -1,
};
+static struct platform_device trimslice_audio_device = {
+ .name = "tegra-snd-trimslice",
+ .id = 0,
+};
+
static struct platform_device *trimslice_devices[] __initdata = {
&debug_uart,
&tegra_sdhci_device1,
&tegra_sdhci_device4,
+ &tegra_i2s_device1,
+ &tegra_das_device,
+ &tegra_pcm_device,
+ &trimslice_audio_device,
};
+static struct i2c_board_info trimslice_i2c3_board_info[] = {
+ {
+ I2C_BOARD_INFO("tlv320aic23", 0x1a),
+ },
+ {
+ I2C_BOARD_INFO("em3027", 0x56),
+ },
+};
+
+static void trimslice_i2c_init(void)
+{
+ platform_device_register(&tegra_i2c_device1);
+ platform_device_register(&tegra_i2c_device2);
+ platform_device_register(&tegra_i2c_device3);
+
+ i2c_register_board_info(2, trimslice_i2c3_board_info,
+ ARRAY_SIZE(trimslice_i2c3_board_info));
+}
+
+static void trimslice_usb_init(void)
+{
+ int err;
+
+ platform_device_register(&tegra_ehci3_device);
+
+ platform_device_register(&tegra_ehci2_device);
+
+ err = gpio_request_one(TRIMSLICE_GPIO_USB1_MODE, GPIOF_OUT_INIT_HIGH,
+ "usb1mode");
+ if (err) {
+ pr_err("TrimSlice: failed to obtain USB1 mode gpio: %d\n", err);
+ return;
+ }
+
+ platform_device_register(&tegra_ehci1_device);
+}
+
static void __init tegra_trimslice_fixup(struct machine_desc *desc,
struct tag *tags, char **cmdline, struct meminfo *mi)
{
static __initdata struct tegra_clk_init_table trimslice_clk_init_table[] = {
/* name parent rate enabled */
{ "uarta", "pll_p", 216000000, true },
+ { "pll_a", "pll_p_out1", 56448000, true },
+ { "pll_a_out0", "pll_a", 11289600, true },
+ { "cdev1", NULL, 0, true },
+ { "i2s1", "pll_a_out0", 11289600, false},
{ NULL, NULL, 0, 0},
};
tegra_sdhci_device4.dev.platform_data = &sdhci_pdata4;
platform_add_devices(trimslice_devices, ARRAY_SIZE(trimslice_devices));
+
+ trimslice_i2c_init();
+ trimslice_usb_init();
}
MACHINE_START(TRIMSLICE, "trimslice")
#define TRIMSLICE_GPIO_SD4_CD TEGRA_GPIO_PP1 /* mmc4 cd */
#define TRIMSLICE_GPIO_SD4_WP TEGRA_GPIO_PP2 /* mmc4 wp */
+#define TRIMSLICE_GPIO_USB1_MODE TEGRA_GPIO_PV2 /* USB1 mode */
+#define TRIMSLICE_GPIO_USB2_RST TEGRA_GPIO_PV0 /* USB2 PHY reset */
+
void trimslice_pinmux_init(void);
#endif
#include <linux/dma-mapping.h>
#include <linux/fsl_devices.h>
#include <linux/serial_8250.h>
+#include <linux/i2c-tegra.h>
+#include <linux/platform_data/tegra_usb.h>
#include <asm/pmu.h>
#include <mach/irqs.h>
#include <mach/iomap.h>
#include <mach/dma.h>
+#include <mach/usb_phy.h>
+#include "gpio-names.h"
static struct resource i2c_resource1[] = {
[0] = {
},
};
+static struct tegra_i2c_platform_data tegra_i2c1_platform_data = {
+ .bus_clk_rate = 400000,
+};
+
+static struct tegra_i2c_platform_data tegra_i2c2_platform_data = {
+ .bus_clk_rate = 400000,
+};
+
+static struct tegra_i2c_platform_data tegra_i2c3_platform_data = {
+ .bus_clk_rate = 400000,
+};
+
+static struct tegra_i2c_platform_data tegra_dvc_platform_data = {
+ .bus_clk_rate = 400000,
+};
+
struct platform_device tegra_i2c_device1 = {
.name = "tegra-i2c",
.id = 0,
.resource = i2c_resource1,
.num_resources = ARRAY_SIZE(i2c_resource1),
.dev = {
- .platform_data = 0,
+ .platform_data = &tegra_i2c1_platform_data,
},
};
.resource = i2c_resource2,
.num_resources = ARRAY_SIZE(i2c_resource2),
.dev = {
- .platform_data = 0,
+ .platform_data = &tegra_i2c2_platform_data,
},
};
.resource = i2c_resource3,
.num_resources = ARRAY_SIZE(i2c_resource3),
.dev = {
- .platform_data = 0,
+ .platform_data = &tegra_i2c3_platform_data,
},
};
.resource = i2c_resource4,
.num_resources = ARRAY_SIZE(i2c_resource4),
.dev = {
- .platform_data = 0,
+ .platform_data = &tegra_dvc_platform_data,
},
};
},
};
+static struct tegra_ulpi_config tegra_ehci2_ulpi_phy_config = {
+ /* All existing boards use GPIO PV0 for phy reset */
+ .reset_gpio = TEGRA_GPIO_PV0,
+ .clk = "cdev2",
+};
+
+static struct tegra_ehci_platform_data tegra_ehci1_pdata = {
+ .operating_mode = TEGRA_USB_OTG,
+ .power_down_on_bus_suspend = 1,
+};
+
+static struct tegra_ehci_platform_data tegra_ehci2_pdata = {
+ .phy_config = &tegra_ehci2_ulpi_phy_config,
+ .operating_mode = TEGRA_USB_HOST,
+ .power_down_on_bus_suspend = 1,
+};
+
+static struct tegra_ehci_platform_data tegra_ehci3_pdata = {
+ .operating_mode = TEGRA_USB_HOST,
+ .power_down_on_bus_suspend = 1,
+};
+
static u64 tegra_ehci_dmamask = DMA_BIT_MASK(32);
struct platform_device tegra_ehci1_device = {
.dev = {
.dma_mask = &tegra_ehci_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &tegra_ehci1_pdata,
},
.resource = tegra_usb1_resources,
.num_resources = ARRAY_SIZE(tegra_usb1_resources),
.dev = {
.dma_mask = &tegra_ehci_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &tegra_ehci2_pdata,
},
.resource = tegra_usb2_resources,
.num_resources = ARRAY_SIZE(tegra_usb2_resources),
.dev = {
.dma_mask = &tegra_ehci_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &tegra_ehci3_pdata,
},
.resource = tegra_usb3_resources,
.num_resources = ARRAY_SIZE(tegra_usb3_resources),
+++ /dev/null
-/*
- * arch/arm/mach-realview/include/mach/barriers.h
- *
- * Copyright (C) 2010 ARM Ltd.
- * Written by Catalin Marinas <catalin.marinas@arm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __MACH_BARRIERS_H
-#define __MACH_BARRIERS_H
-
-#include <asm/outercache.h>
-
-#define rmb() dsb()
-#define wmb() do { dsb(); outer_sync(); } while (0)
-#define mb() wmb()
-
-#endif /* __MACH_BARRIERS_H */
}
for (i = 0; i < ncores; i++)
- cpu_set(i, cpu_possible_map);
+ set_cpu_possible(i, true);
set_smp_cross_call(gic_raise_softirq);
}
PERIPH_CLK("tvo", "tvo", NULL, 49, 0x188, 250000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71), /* requires min voltage */
PERIPH_CLK("hdmi", "hdmi", NULL, 51, 0x18c, 600000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71), /* requires min voltage */
PERIPH_CLK("tvdac", "tvdac", NULL, 53, 0x194, 250000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71), /* requires min voltage */
- PERIPH_CLK("disp1", "tegradc.0", NULL, 27, 0x138, 600000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71), /* scales with voltage and process_id */
- PERIPH_CLK("disp2", "tegradc.1", NULL, 26, 0x13c, 600000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71), /* scales with voltage and process_id */
+ PERIPH_CLK("disp1", "tegradc.0", NULL, 27, 0x138, 600000000, mux_pllp_plld_pllc_clkm, MUX), /* scales with voltage and process_id */
+ PERIPH_CLK("disp2", "tegradc.1", NULL, 26, 0x13c, 600000000, mux_pllp_plld_pllc_clkm, MUX), /* scales with voltage and process_id */
PERIPH_CLK("usbd", "fsl-tegra-udc", NULL, 22, 0, 480000000, mux_clk_m, 0), /* requires min voltage */
PERIPH_CLK("usb2", "tegra-ehci.1", NULL, 58, 0, 480000000, mux_clk_m, 0), /* requires min voltage */
PERIPH_CLK("usb3", "tegra-ehci.2", NULL, 59, 0, 480000000, mux_clk_m, 0), /* requires min voltage */
.hierarchy = SSP_MASTER,
/* 0 = drive TX even as slave, 1 = do not drive TX as slave */
.slave_tx_disable = 0,
- .rx_lev_trig = SSP_RX_1_OR_MORE_ELEM,
- .tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC,
+ .rx_lev_trig = SSP_RX_4_OR_MORE_ELEM,
+ .tx_lev_trig = SSP_TX_4_OR_MORE_EMPTY_LOC,
.ctrl_len = SSP_BITS_12,
.wait_state = SSP_MWIRE_WAIT_ZERO,
.duplex = SSP_MICROWIRE_CHANNEL_FULL_DUPLEX,
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
-/* Be able to sleep for atleast 4 seconds (usually more) */
-#define APPTIMER_MIN_RANGE 4
-
/*
* APP side special timer registers
* This timer contains four timers which can fire an interrupt each.
/* Use general purpose timer 1 as clock event */
static struct clock_event_device clockevent_u300_1mhz = {
- .name = "GPT1",
- .rating = 300, /* Reasonably fast and accurate clock event */
- .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
- .set_next_event = u300_set_next_event,
- .set_mode = u300_set_mode,
+ .name = "GPT1",
+ .rating = 300, /* Reasonably fast and accurate clock event */
+ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+ .set_next_event = u300_set_next_event,
+ .set_mode = u300_set_mode,
};
/* Clock event timer interrupt handler */
}
static struct irqaction u300_timer_irq = {
- .name = "U300 Timer Tick",
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
- .handler = u300_timer_interrupt,
+ .name = "U300 Timer Tick",
+ .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+ .handler = u300_timer_interrupt,
};
/*
"GPT2", rate, 300, 32, clocksource_mmio_readl_up))
pr_err("timer: failed to initialize U300 clock source\n");
- clockevents_calc_mult_shift(&clockevent_u300_1mhz,
- rate, APPTIMER_MIN_RANGE);
- /* 32bit counter, so 32bits delta is max */
- clockevent_u300_1mhz.max_delta_ns =
- clockevent_delta2ns(0xffffffff, &clockevent_u300_1mhz);
- /* This timer is slow enough to set for 1 cycle == 1 MHz */
- clockevent_u300_1mhz.min_delta_ns =
- clockevent_delta2ns(1, &clockevent_u300_1mhz);
- clockevent_u300_1mhz.cpumask = cpumask_of(0);
- clockevents_register_device(&clockevent_u300_1mhz);
+ /* Configure and register the clockevent */
+ clockevents_config_and_register(&clockevent_u300_1mhz, rate,
+ 1, 0xffffffff);
+
/*
* TODO: init and register the rest of the timers too, they can be
* used by hrtimers!
endmenu
-menu "Ux500 target platform"
+menu "Ux500 target platform (boards)"
config MACH_U8500
bool "U8500 Development platform"
help
Include support for the mop500 development platform.
+config MACH_HREFV60
+ bool "U85000 Development platform, HREFv60 version"
+ depends on UX500_SOC_DB8500
+ help
+ Include support for the HREFv60 new development platform.
+
+config MACH_SNOWBALL
+ bool "U8500 Snowball platform"
+ depends on UX500_SOC_DB8500
+ select MACH_U8500
+ help
+ Include support for the snowball development platform.
+
config MACH_U5500
bool "U5500 Development platform"
depends on UX500_SOC_DB5500
};
+static pin_cfg_t snowball_pins[] = {
+ /* SSP0, to AB8500 */
+ GPIO143_SSP0_CLK,
+ GPIO144_SSP0_FRM,
+ GPIO145_SSP0_RXD | PIN_PULL_DOWN,
+ GPIO146_SSP0_TXD,
+
+ /* MMC0: MicroSD card */
+ GPIO21_MC0_DAT31DIR | PIN_OUTPUT_HIGH,
+
+ /* MMC2: LAN */
+ GPIO86_SM_ADQ0,
+ GPIO87_SM_ADQ1,
+ GPIO88_SM_ADQ2,
+ GPIO89_SM_ADQ3,
+ GPIO90_SM_ADQ4,
+ GPIO91_SM_ADQ5,
+ GPIO92_SM_ADQ6,
+ GPIO93_SM_ADQ7,
+
+ GPIO94_SM_ADVn,
+ GPIO95_SM_CS0n,
+ GPIO96_SM_OEn,
+ GPIO97_SM_WEn,
+
+ GPIO128_SM_CKO,
+ GPIO130_SM_FBCLK,
+ GPIO131_SM_ADQ8,
+ GPIO132_SM_ADQ9,
+ GPIO133_SM_ADQ10,
+ GPIO134_SM_ADQ11,
+ GPIO135_SM_ADQ12,
+ GPIO136_SM_ADQ13,
+ GPIO137_SM_ADQ14,
+ GPIO138_SM_ADQ15,
+
+ /* RSTn_LAN */
+ GPIO141_GPIO | PIN_OUTPUT_HIGH,
+};
+
void __init mop500_pins_init(void)
{
nmk_config_pins(mop500_pins_common,
if (machine_is_hrefv60())
nmk_config_pins(mop500_pins_hrefv60,
ARRAY_SIZE(mop500_pins_hrefv60));
+ else if (machine_is_snowball())
+ nmk_config_pins(snowball_pins,
+ ARRAY_SIZE(snowball_pins));
else
nmk_config_pins(mop500_pins_default,
ARRAY_SIZE(mop500_pins_default));
.max_uV = 2900000,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
REGULATOR_CHANGE_STATUS,
- .boot_on = 1, /* must be on for display */
+ .boot_on = 1, /* display is on at boot */
+ /*
+ * This voltage cannot be disabled right now because
+ * it is somehow affecting the external MMC
+ * functionality, though that typically will use
+ * AUX3.
+ */
+ .always_on = 1,
},
.num_consumer_supplies = ARRAY_SIZE(ab8500_vaux1_consumers),
.consumer_supplies = ab8500_vaux1_consumers,
#define MCI_DATA31DIREN (1 << 5)
#define MCI_FBCLKEN (1 << 7)
+/* GPIO pins used by the sdi0 level shifter */
+static int sdi0_en = -1;
+static int sdi0_vsel = -1;
+
static u32 mop500_sdi0_vdd_handler(struct device *dev, unsigned int vdd,
unsigned char power_mode)
{
- if (power_mode == MMC_POWER_UP)
- gpio_set_value_cansleep(GPIO_SDMMC_EN, 1);
- else if (power_mode == MMC_POWER_OFF)
- gpio_set_value_cansleep(GPIO_SDMMC_EN, 0);
+ switch (power_mode) {
+ case MMC_POWER_UP:
+ case MMC_POWER_ON:
+ /*
+ * Level shifter voltage should depend on vdd to when deciding
+ * on either 1.8V or 2.9V. Once the decision has been made the
+ * level shifter must be disabled and re-enabled with a changed
+ * select signal in order to switch the voltage. Since there is
+ * no framework support yet for indicating 1.8V in vdd, use the
+ * default 2.9V.
+ */
+ gpio_direction_output(sdi0_vsel, 0);
+ gpio_direction_output(sdi0_en, 1);
+ break;
+ case MMC_POWER_OFF:
+ gpio_direction_output(sdi0_vsel, 0);
+ gpio_direction_output(sdi0_en, 0);
+ break;
+ }
return MCI_FBCLKEN | MCI_CMDDIREN | MCI_DATA0DIREN |
MCI_DATA2DIREN | MCI_DATA31DIREN;
static struct mmci_platform_data mop500_sdi0_data = {
.vdd_handler = mop500_sdi0_vdd_handler,
.ocr_mask = MMC_VDD_29_30,
- .f_max = 100000000,
- .capabilities = MMC_CAP_4_BIT_DATA,
+ .f_max = 50000000,
+ .capabilities = MMC_CAP_4_BIT_DATA |
+ MMC_CAP_SD_HIGHSPEED |
+ MMC_CAP_MMC_HIGHSPEED,
.gpio_wp = -1,
#ifdef CONFIG_STE_DMA40
.dma_filter = stedma40_filter,
#endif
};
-/* GPIO pins used by the sdi0 level shifter */
-static int sdi0_en = -1;
-static int sdi0_vsel = -1;
-
static void sdi0_configure(void)
{
int ret;
static struct mmci_platform_data mop500_sdi2_data = {
.ocr_mask = MMC_VDD_165_195,
- .f_max = 100000000,
+ .f_max = 50000000,
.capabilities = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
.gpio_cd = -1,
.gpio_wp = -1,
static struct mmci_platform_data mop500_sdi4_data = {
.ocr_mask = MMC_VDD_29_30,
- .f_max = 100000000,
+ .f_max = 50000000,
.capabilities = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA |
MMC_CAP_MMC_HIGHSPEED,
.gpio_cd = -1,
/* PoP:ed eMMC on top of DB8500 v1.0 has problems with high speed */
if (!cpu_is_u8500v10())
mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED;
- db8500_add_sdi2(&mop500_sdi2_data, periphid);
+ /* sdi2 on snowball is in ATL_B mode for FSMC (LAN) */
+ if (!machine_is_snowball())
+ db8500_add_sdi2(&mop500_sdi2_data, periphid);
/* On-board eMMC */
db8500_add_sdi4(&mop500_sdi4_data, periphid);
- if (machine_is_hrefv60()) {
- mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO;
- sdi0_en = HREFV60_SDMMC_EN_GPIO;
- sdi0_vsel = HREFV60_SDMMC_1V8_3V_GPIO;
+ if (machine_is_hrefv60() || machine_is_snowball()) {
+ if (machine_is_hrefv60()) {
+ mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO;
+ sdi0_en = HREFV60_SDMMC_EN_GPIO;
+ sdi0_vsel = HREFV60_SDMMC_1V8_3V_GPIO;
+ } else if (machine_is_snowball()) {
+ mop500_sdi0_data.gpio_cd = SNOWBALL_SDMMC_CD_GPIO;
+ mop500_sdi0_data.cd_invert = true;
+ sdi0_en = SNOWBALL_SDMMC_EN_GPIO;
+ sdi0_vsel = SNOWBALL_SDMMC_1V8_3V_GPIO;
+ }
sdi0_configure();
}
+
/*
* On boards with the TC35892 GPIO expander, sdi0 will finally
* be added when the TC35892 initializes and calls
void (*init)(void);
};
-static struct __initdata uib mop500_uibs[] = {
+static struct uib __initdata mop500_uibs[] = {
[STUIB] = {
.name = "ST-UIB",
.option = "stuib",
#include <linux/mfd/ab8500/gpio.h>
#include <linux/leds-lp5521.h>
#include <linux/input.h>
+#include <linux/smsc911x.h>
#include <linux/gpio_keys.h>
#include <linux/delay.h>
+#include <linux/leds.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include "board-mop500.h"
#include "board-mop500-regulators.h"
+static struct gpio_led snowball_led_array[] = {
+ {
+ .name = "user_led",
+ .default_trigger = "none",
+ .gpio = 142,
+ },
+};
+
+static struct gpio_led_platform_data snowball_led_data = {
+ .leds = snowball_led_array,
+ .num_leds = ARRAY_SIZE(snowball_led_array),
+};
+
+static struct platform_device snowball_led_dev = {
+ .name = "leds-gpio",
+ .dev = {
+ .platform_data = &snowball_led_data,
+ },
+};
+
static struct ab8500_gpio_platform_data ab8500_gpio_pdata = {
.gpio_base = MOP500_AB8500_GPIO(0),
.irq_base = MOP500_AB8500_VIR_GPIO_IRQ_BASE,
0x7A, 0x00, 0x00},
};
+static struct gpio_keys_button snowball_key_array[] = {
+ {
+ .gpio = 32,
+ .type = EV_KEY,
+ .code = KEY_1,
+ .desc = "userpb",
+ .active_low = 1,
+ .debounce_interval = 50,
+ .wakeup = 1,
+ },
+ {
+ .gpio = 151,
+ .type = EV_KEY,
+ .code = KEY_2,
+ .desc = "extkb1",
+ .active_low = 1,
+ .debounce_interval = 50,
+ .wakeup = 1,
+ },
+ {
+ .gpio = 152,
+ .type = EV_KEY,
+ .code = KEY_3,
+ .desc = "extkb2",
+ .active_low = 1,
+ .debounce_interval = 50,
+ .wakeup = 1,
+ },
+ {
+ .gpio = 161,
+ .type = EV_KEY,
+ .code = KEY_4,
+ .desc = "extkb3",
+ .active_low = 1,
+ .debounce_interval = 50,
+ .wakeup = 1,
+ },
+ {
+ .gpio = 162,
+ .type = EV_KEY,
+ .code = KEY_5,
+ .desc = "extkb4",
+ .active_low = 1,
+ .debounce_interval = 50,
+ .wakeup = 1,
+ },
+};
+
+static struct gpio_keys_platform_data snowball_key_data = {
+ .buttons = snowball_key_array,
+ .nbuttons = ARRAY_SIZE(snowball_key_array),
+};
+
+static struct platform_device snowball_key_dev = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &snowball_key_data,
+ }
+};
+
+static struct smsc911x_platform_config snowball_sbnet_cfg = {
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
+ .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
+ .flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
+ .shift = 1,
+};
+
+static struct resource sbnet_res[] = {
+ {
+ .name = "smsc911x-memory",
+ .start = (0x5000 << 16),
+ .end = (0x5000 << 16) + 0xffff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = NOMADIK_GPIO_TO_IRQ(140),
+ .end = NOMADIK_GPIO_TO_IRQ(140),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ },
+};
+
+static struct platform_device snowball_sbnet_dev = {
+ .name = "smsc911x",
+ .num_resources = ARRAY_SIZE(sbnet_res),
+ .resource = sbnet_res,
+ .dev = {
+ .platform_data = &snowball_sbnet_cfg,
+ },
+};
+
static struct ab8500_platform_data ab8500_platdata = {
.irq_base = MOP500_AB8500_IRQ_BASE,
.regulator_reg_init = ab8500_regulator_reg_init,
}
/* add any platform devices here - TODO */
-static struct platform_device *platform_devs[] __initdata = {
+static struct platform_device *mop500_platform_devs[] __initdata = {
&mop500_gpio_keys_device,
+ &ab8500_device,
};
#ifdef CONFIG_STE_DMA40
db8500_add_uart2(&uart2_plat);
}
+static struct platform_device *snowball_platform_devs[] __initdata = {
+ &snowball_led_dev,
+ &snowball_key_dev,
+ &snowball_sbnet_dev,
+ &ab8500_device,
+};
+
static void __init mop500_init_machine(void)
{
int i2c0_devs;
* all these GPIO pins to the internal GPIO controller
* instead.
*/
- if (machine_is_hrefv60())
- mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO;
- else
- mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;
+ if (!machine_is_snowball()) {
+ if (machine_is_hrefv60())
+ mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO;
+ else
+ mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;
+ }
u8500_init_devices();
mop500_pins_init();
- platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
+ if (machine_is_snowball())
+ platform_add_devices(snowball_platform_devs,
+ ARRAY_SIZE(snowball_platform_devs));
+ else
+ platform_add_devices(mop500_platform_devs,
+ ARRAY_SIZE(mop500_platform_devs));
mop500_i2c_init();
mop500_sdi_init();
mop500_spi_init();
mop500_uart_init();
- platform_device_register(&ab8500_device);
-
i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
if (machine_is_hrefv60())
i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES;
i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
i2c_register_board_info(2, mop500_i2c2_devices,
ARRAY_SIZE(mop500_i2c2_devices));
+
+ /* This board has full regulator constraints */
+ regulator_has_full_constraints();
}
MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
.timer = &ux500_timer,
.init_machine = mop500_init_machine,
MACHINE_END
+
+MACHINE_START(SNOWBALL, "Calao Systems Snowball platform")
+ .boot_params = 0x100,
+ .map_io = u8500_map_io,
+ .init_irq = ux500_init_irq,
+ /* we re-use nomadik timer here */
+ .timer = &ux500_timer,
+ .init_machine = mop500_init_machine,
+MACHINE_END
#ifndef __BOARD_MOP500_H
#define __BOARD_MOP500_H
+/* snowball GPIO for MMC card */
+#define SNOWBALL_SDMMC_EN_GPIO 217
+#define SNOWBALL_SDMMC_1V8_3V_GPIO 228
+#define SNOWBALL_SDMMC_CD_GPIO 218
+
/* HREFv60-specific GPIO assignments, this board has no GPIO expander */
#define HREFV60_TOUCH_RST_GPIO 143
#define HREFV60_PROX_SENSE_GPIO 217
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/clkdev.h>
+#include <linux/cpufreq.h>
#include <plat/mtu.h>
#include <mach/hardware.h>
late_initcall(clk_debugfs_init);
#endif /* defined(CONFIG_DEBUG_FS) */
+unsigned long clk_smp_twd_rate = 400000000;
+
+unsigned long clk_smp_twd_get_rate(struct clk *clk)
+{
+ return clk_smp_twd_rate;
+}
+
+static struct clk clk_smp_twd = {
+ .get_rate = clk_smp_twd_get_rate,
+ .name = "smp_twd",
+};
+
+static struct clk_lookup clk_smp_twd_lookup = {
+ .dev_id = "smp_twd",
+ .clk = &clk_smp_twd,
+};
+
+#ifdef CONFIG_CPU_FREQ
+
+static int clk_twd_cpufreq_transition(struct notifier_block *nb,
+ unsigned long state, void *data)
+{
+ struct cpufreq_freqs *f = data;
+
+ if (state == CPUFREQ_PRECHANGE) {
+ /* Save frequency in simple Hz */
+ clk_smp_twd_rate = f->new * 1000;
+ }
+
+ return NOTIFY_OK;
+}
+
+static struct notifier_block clk_twd_cpufreq_nb = {
+ .notifier_call = clk_twd_cpufreq_transition,
+};
+
+static int clk_init_smp_twd_cpufreq(void)
+{
+ return cpufreq_register_notifier(&clk_twd_cpufreq_nb,
+ CPUFREQ_TRANSITION_NOTIFIER);
+}
+late_initcall(clk_init_smp_twd_cpufreq);
+
+#endif
+
int __init clk_init(void)
{
if (cpu_is_u8500ed()) {
else
clkdev_add_table(u8500_v1_clks, ARRAY_SIZE(u8500_v1_clks));
+ clkdev_add(&clk_smp_twd_lookup);
+
#ifdef CONFIG_DEBUG_FS
clk_debugfs_add_table(u8500_common_clks, ARRAY_SIZE(u8500_common_clks));
if (cpu_is_u8500ed())
__IO_DEV_DESC(U5500_GPIO3_BASE, SZ_4K),
__IO_DEV_DESC(U5500_GPIO4_BASE, SZ_4K),
__IO_DEV_DESC(U5500_PRCMU_BASE, SZ_4K),
+ __IO_DEV_DESC(U5500_PRCMU_TCDM_BASE, SZ_4K),
};
static struct resource db5500_pmu_resources[] = {
if (machine_is_u8500() ||
machine_is_svp8500v1() ||
machine_is_svp8500v2() ||
- machine_is_hrefv60())
+ machine_is_hrefv60() ||
+ machine_is_snowball())
ux500_uart_base = U8500_UART2_BASE;
else if (machine_is_u5500())
ux500_uart_base = U5500_UART0_BASE;
*/
#include <linux/platform_device.h>
#include <linux/usb/musb.h>
+#include <linux/dma-mapping.h>
#include <plat/ste_dma40.h>
#include <mach/hardware.h>
#include <mach/usb.h>
REALVIEW_EB_A9MP || SOC_IMX35 || SOC_IMX31 || MACH_REALVIEW_PBX || \
ARCH_NOMADIK || ARCH_OMAP4 || ARCH_EXYNOS4 || ARCH_TEGRA || \
ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_SHMOBILE || \
- ARCH_PRIMA2 || ARCH_ZYNQ
+ ARCH_PRIMA2 || ARCH_ZYNQ || ARCH_CNS3XXX
default y
select OUTER_CACHE
select OUTER_CACHE_SYNC
.parent = &platform_bus,
};
+struct device mxc_ahb_bus = {
+ .init_name = "mxc_ahb",
+ .parent = &platform_bus,
+};
+
static int __init mxc_device_init(void)
{
- return device_register(&mxc_aips_bus);
+ int ret;
+
+ ret = device_register(&mxc_aips_bus);
+ if (IS_ERR_VALUE(ret))
+ goto done;
+
+ ret = device_register(&mxc_ahb_bus);
+
+done:
+ return ret;
}
core_initcall(mxc_device_init);
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <linux/compiler.h>
-#include <linux/err.h>
-#include <linux/init.h>
-
-#include <mach/hardware.h>
#include <mach/devices-common.h>
-#include <mach/sdma.h>
-
-struct imx_imx_sdma_data {
- resource_size_t iobase;
- resource_size_t irq;
- struct sdma_platform_data pdata;
-};
-
-#define imx_imx_sdma_data_entry_single(soc, _sdma_version, _cpu_name, _to_version)\
- { \
- .iobase = soc ## _SDMA ## _BASE_ADDR, \
- .irq = soc ## _INT_SDMA, \
- .pdata = { \
- .sdma_version = _sdma_version, \
- .cpu_name = _cpu_name, \
- .to_version = _to_version, \
- }, \
- }
-
-#ifdef CONFIG_SOC_IMX25
-struct imx_imx_sdma_data imx25_imx_sdma_data __initconst =
- imx_imx_sdma_data_entry_single(MX25, 2, "imx25", 1);
-#endif /* ifdef CONFIG_SOC_IMX25 */
-#ifdef CONFIG_SOC_IMX31
-struct imx_imx_sdma_data imx31_imx_sdma_data __initdata =
- imx_imx_sdma_data_entry_single(MX31, 1, "imx31", 1);
-#endif /* ifdef CONFIG_SOC_IMX31 */
-
-#ifdef CONFIG_SOC_IMX35
-struct imx_imx_sdma_data imx35_imx_sdma_data __initdata =
- imx_imx_sdma_data_entry_single(MX35, 2, "imx35", 1);
-#endif /* ifdef CONFIG_SOC_IMX35 */
-
-#ifdef CONFIG_SOC_IMX51
-struct imx_imx_sdma_data imx51_imx_sdma_data __initconst =
- imx_imx_sdma_data_entry_single(MX51, 2, "imx51", 1);
-#endif /* ifdef CONFIG_SOC_IMX51 */
+struct platform_device __init __maybe_unused *imx_add_imx_dma(void)
+{
+ return platform_device_register_resndata(&mxc_ahb_bus,
+ "imx-dma", -1, NULL, 0, NULL, 0);
+}
-static struct platform_device __init __maybe_unused *imx_add_imx_sdma(
- const struct imx_imx_sdma_data *data)
+struct platform_device __init __maybe_unused *imx_add_imx_sdma(
+ resource_size_t iobase, int irq, struct sdma_platform_data *pdata)
{
struct resource res[] = {
{
- .start = data->iobase,
- .end = data->iobase + SZ_16K - 1,
+ .start = iobase,
+ .end = iobase + SZ_16K - 1,
.flags = IORESOURCE_MEM,
}, {
- .start = data->irq,
- .end = data->irq,
+ .start = irq,
+ .end = irq,
.flags = IORESOURCE_IRQ,
},
};
- return imx_add_platform_device("imx-sdma", -1,
- res, ARRAY_SIZE(res),
- &data->pdata, sizeof(data->pdata));
-}
-
-static struct platform_device __init __maybe_unused *imx_add_imx_dma(void)
-{
- return imx_add_platform_device("imx-dma", -1, NULL, 0, NULL, 0);
-}
-
-#ifdef CONFIG_ARCH_MX25
-static struct sdma_script_start_addrs addr_imx25 = {
- .ap_2_ap_addr = 729,
- .uart_2_mcu_addr = 904,
- .per_2_app_addr = 1255,
- .mcu_2_app_addr = 834,
- .uartsh_2_mcu_addr = 1120,
- .per_2_shp_addr = 1329,
- .mcu_2_shp_addr = 1048,
- .ata_2_mcu_addr = 1560,
- .mcu_2_ata_addr = 1479,
- .app_2_per_addr = 1189,
- .app_2_mcu_addr = 770,
- .shp_2_per_addr = 1407,
- .shp_2_mcu_addr = 979,
-};
-#endif
-
-#ifdef CONFIG_SOC_IMX31
-static struct sdma_script_start_addrs addr_imx31_to1 = {
- .per_2_per_addr = 1677,
-};
-
-static struct sdma_script_start_addrs addr_imx31_to2 = {
- .ap_2_ap_addr = 423,
- .ap_2_bp_addr = 829,
- .bp_2_ap_addr = 1029,
-};
-#endif
-
-#ifdef CONFIG_SOC_IMX35
-static struct sdma_script_start_addrs addr_imx35_to1 = {
- .ap_2_ap_addr = 642,
- .uart_2_mcu_addr = 817,
- .mcu_2_app_addr = 747,
- .uartsh_2_mcu_addr = 1183,
- .per_2_shp_addr = 1033,
- .mcu_2_shp_addr = 961,
- .ata_2_mcu_addr = 1333,
- .mcu_2_ata_addr = 1252,
- .app_2_mcu_addr = 683,
- .shp_2_per_addr = 1111,
- .shp_2_mcu_addr = 892,
-};
-
-static struct sdma_script_start_addrs addr_imx35_to2 = {
- .ap_2_ap_addr = 729,
- .uart_2_mcu_addr = 904,
- .per_2_app_addr = 1597,
- .mcu_2_app_addr = 834,
- .uartsh_2_mcu_addr = 1270,
- .per_2_shp_addr = 1120,
- .mcu_2_shp_addr = 1048,
- .ata_2_mcu_addr = 1429,
- .mcu_2_ata_addr = 1339,
- .app_2_per_addr = 1531,
- .app_2_mcu_addr = 770,
- .shp_2_per_addr = 1198,
- .shp_2_mcu_addr = 979,
-};
-#endif
-
-#ifdef CONFIG_SOC_IMX51
-static struct sdma_script_start_addrs addr_imx51 = {
- .ap_2_ap_addr = 642,
- .uart_2_mcu_addr = 817,
- .mcu_2_app_addr = 747,
- .mcu_2_shp_addr = 961,
- .ata_2_mcu_addr = 1473,
- .mcu_2_ata_addr = 1392,
- .app_2_per_addr = 1033,
- .app_2_mcu_addr = 683,
- .shp_2_per_addr = 1251,
- .shp_2_mcu_addr = 892,
-};
-#endif
-
-static int __init imxXX_add_imx_dma(void)
-{
- struct platform_device *ret;
-
-#if defined(CONFIG_SOC_IMX21) || defined(CONFIG_SOC_IMX27)
- if (cpu_is_mx21() || cpu_is_mx27())
- ret = imx_add_imx_dma();
- else
-#endif
-
-#if defined(CONFIG_SOC_IMX25)
- if (cpu_is_mx25()) {
- imx25_imx_sdma_data.pdata.script_addrs = &addr_imx25;
- ret = imx_add_imx_sdma(&imx25_imx_sdma_data);
- } else
-#endif
-
-#if defined(CONFIG_SOC_IMX31)
- if (cpu_is_mx31()) {
- int to_version = mx31_revision() >> 4;
- imx31_imx_sdma_data.pdata.to_version = to_version;
- if (to_version == 1)
- imx31_imx_sdma_data.pdata.script_addrs = &addr_imx31_to1;
- else
- imx31_imx_sdma_data.pdata.script_addrs = &addr_imx31_to2;
- ret = imx_add_imx_sdma(&imx31_imx_sdma_data);
- } else
-#endif
-
-#if defined(CONFIG_SOC_IMX35)
- if (cpu_is_mx35()) {
- int to_version = mx35_revision() >> 4;
- imx35_imx_sdma_data.pdata.to_version = to_version;
- if (to_version == 1)
- imx35_imx_sdma_data.pdata.script_addrs = &addr_imx35_to1;
- else
- imx35_imx_sdma_data.pdata.script_addrs = &addr_imx35_to2;
- ret = imx_add_imx_sdma(&imx35_imx_sdma_data);
- } else
-#endif
-
-#if defined(CONFIG_SOC_IMX51)
- if (cpu_is_mx51()) {
- int to_version = mx51_revision() >> 4;
- imx51_imx_sdma_data.pdata.to_version = to_version;
- imx51_imx_sdma_data.pdata.script_addrs = &addr_imx51;
- ret = imx_add_imx_sdma(&imx51_imx_sdma_data);
- } else
-#endif
- ret = ERR_PTR(-ENODEV);
-
- if (IS_ERR(ret))
- return PTR_ERR(ret);
-
- return 0;
+ return platform_device_register_resndata(&mxc_ahb_bus, "imx-sdma",
+ -1, res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
}
-arch_initcall(imxXX_add_imx_dma);
imx_imx_i2c_data_entry(MX53, _id, _hwid, SZ_4K)
imx53_imx_i2c_data_entry(0, 1),
imx53_imx_i2c_data_entry(1, 2),
+ imx53_imx_i2c_data_entry(2, 3),
};
-#endif /* ifdef CONFIG_SOC_IMX51 */
+#endif /* ifdef CONFIG_SOC_IMX53 */
struct platform_device *__init imx_add_imx_i2c(
const struct imx_imx_i2c_data *data,
imx_imx_keypad_data_entry_single(MX51, SZ_16);
#endif /* ifdef CONFIG_SOC_IMX51 */
+#ifdef CONFIG_SOC_IMX53
+const struct imx_imx_keypad_data imx53_imx_keypad_data __initconst =
+ imx_imx_keypad_data_entry_single(MX53, SZ_16);
+#endif /* ifdef CONFIG_SOC_IMX53 */
+
struct platform_device *__init imx_add_imx_keypad(
const struct imx_imx_keypad_data *data,
const struct matrix_keymap_data *pdata)
};
#endif /* ifdef CONFIG_SOC_IMX51 */
+#ifdef CONFIG_SOC_IMX53
+const struct imx_imx_ssi_data imx53_imx_ssi_data[] __initconst = {
+#define imx53_imx_ssi_data_entry(_id, _hwid) \
+ imx_imx_ssi_data_entry(MX53, _id, _hwid, SZ_16K)
+ imx53_imx_ssi_data_entry(0, 1),
+ imx53_imx_ssi_data_entry(1, 2),
+ imx53_imx_ssi_data_entry(2, 3),
+};
+#endif /* ifdef CONFIG_SOC_IMX53 */
+
struct platform_device *__init imx_add_imx_ssi(
const struct imx_imx_ssi_data *data,
const struct imx_ssi_platform_data *pdata)
imx53_imx_uart_data_entry(0, 1),
imx53_imx_uart_data_entry(1, 2),
imx53_imx_uart_data_entry(2, 3),
+ imx53_imx_uart_data_entry(3, 4),
+ imx53_imx_uart_data_entry(4, 5),
};
#endif /* ifdef CONFIG_SOC_IMX53 */
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/init.h>
+#include <mach/sdma.h>
extern struct device mxc_aips_bus;
+extern struct device mxc_ahb_bus;
struct platform_device *imx_add_platform_device_dmamask(
const char *name, int id,
struct platform_device *__init imx_add_spi_imx(
const struct imx_spi_imx_data *data,
const struct spi_imx_master *pdata);
+
+struct platform_device *imx_add_imx_dma(void);
+struct platform_device *imx_add_imx_sdma(
+ resource_size_t iobase, int irq, struct sdma_platform_data *pdata);
/*
* DMA request assignments
*/
-#define MX53_DMA_REQ_SSI3_TX1 47
-#define MX53_DMA_REQ_SSI3_RX1 46
-#define MX53_DMA_REQ_SSI3_TX2 45
-#define MX53_DMA_REQ_SSI3_RX2 44
+#define MX53_DMA_REQ_SSI3_TX0 47
+#define MX53_DMA_REQ_SSI3_RX0 46
+#define MX53_DMA_REQ_SSI3_TX1 45
+#define MX53_DMA_REQ_SSI3_RX1 44
#define MX53_DMA_REQ_UART3_TX 43
#define MX53_DMA_REQ_UART3_RX 42
#define MX53_DMA_REQ_ESAI_TX 41
#define MX53_DMA_REQ_ASRC_DMA1 32
#define MX53_DMA_REQ_EMI_WR 31
#define MX53_DMA_REQ_EMI_RD 30
-#define MX53_DMA_REQ_SSI1_TX1 29
-#define MX53_DMA_REQ_SSI1_RX1 28
-#define MX53_DMA_REQ_SSI1_TX2 27
-#define MX53_DMA_REQ_SSI1_RX2 26
-#define MX53_DMA_REQ_SSI2_TX1 25
-#define MX53_DMA_REQ_SSI2_RX1 24
-#define MX53_DMA_REQ_SSI2_TX2 23
-#define MX53_DMA_REQ_SSI2_RX2 22
+#define MX53_DMA_REQ_SSI1_TX0 29
+#define MX53_DMA_REQ_SSI1_RX0 28
+#define MX53_DMA_REQ_SSI1_TX1 27
+#define MX53_DMA_REQ_SSI1_RX1 26
+#define MX53_DMA_REQ_SSI2_TX0 25
+#define MX53_DMA_REQ_SSI2_RX0 24
+#define MX53_DMA_REQ_SSI2_TX1 23
+#define MX53_DMA_REQ_SSI2_RX1 22
#define MX53_DMA_REQ_I2C2_SDHC2 21
#define MX53_DMA_REQ_I2C1_SDHC1 20
#define MX53_DMA_REQ_UART1_TX 19
#define MX53_INT_IPU_ERR 10
#define MX53_INT_IPU_SYN 11
#define MX53_INT_GPU 12
-#define MX53_INT_RESV13 13
+#define MX53_INT_UART4 13
#define MX53_INT_USB_H1 14
#define MX53_INT_EMI 15
#define MX53_INT_USB_H2 16
#define MX53_INT_CAN2 83
#define MX53_INT_GPU2_IRQ 84
#define MX53_INT_GPU2_BUSY 85
-#define MX53_INT_RESV86 86
+#define MX53_INT_UART5 86
#define MX53_INT_FEC 87
#define MX53_INT_OWIRE 88
#define MX53_INT_CTI1_TG2 89
* struct sdma_platform_data - platform specific data for SDMA engine
*
* @sdma_version The version of this SDMA engine
- * @cpu_name used to generate the firmware name
- * @to_version CPU Tape out version
+ * @fw_name The firmware name
* @script_addrs SDMA scripts addresses in SDMA ROM
*/
struct sdma_platform_data {
int sdma_version;
- char *cpu_name;
- int to_version;
+ char *fw_name;
struct sdma_script_start_addrs *script_addrs;
};
case MACH_TYPE_MX53_EVK:
case MACH_TYPE_MX53_LOCO:
case MACH_TYPE_MX53_SMD:
+ case MACH_TYPE_MX53_ARD:
uart_base = MX53_UART1_BASE_ADDR;
break;
default:
int mxc_set_irq_fiq(unsigned int irq, unsigned int type)
{
- struct mxc_irq_chip *chip;
- struct irq_chip *base;
+ struct irq_chip_generic *gc;
+ int (*set_irq_fiq)(unsigned int, unsigned int);
int ret;
ret = -ENOSYS;
- base = irq_get_chip(irq);
- if (base) {
- chip = container_of(base, struct mxc_irq_chip, base);
- if (chip->set_irq_fiq)
- ret = chip->set_irq_fiq(irq, type);
+ gc = irq_get_chip_data(irq);
+ if (gc && gc->private) {
+ set_irq_fiq = gc->private;
+ ret = set_irq_fiq(irq, type);
}
return ret;
return 0;
}
+#else
+#define tzic_set_irq_fiq NULL
#endif
-/**
- * tzic_mask_irq() - Disable interrupt source "d" in the TZIC
- *
- * @param d interrupt source
- */
-static void tzic_mask_irq(struct irq_data *d)
-{
- int index, off;
-
- index = d->irq >> 5;
- off = d->irq & 0x1F;
- __raw_writel(1 << off, tzic_base + TZIC_ENCLEAR0(index));
-}
-
-/**
- * tzic_unmask_irq() - Enable interrupt source "d" in the TZIC
- *
- * @param d interrupt source
- */
-static void tzic_unmask_irq(struct irq_data *d)
-{
- int index, off;
-
- index = d->irq >> 5;
- off = d->irq & 0x1F;
- __raw_writel(1 << off, tzic_base + TZIC_ENSET0(index));
-}
-
-static unsigned int wakeup_intr[4];
+static unsigned int *wakeup_intr[4];
-/**
- * tzic_set_wake_irq() - Set interrupt source "d" in the TZIC as a wake-up source.
- *
- * @param d interrupt source
- * @param enable enable as wake-up if equal to non-zero
- * disble as wake-up if equal to zero
- *
- * @return This function returns 0 on success.
- */
-static int tzic_set_wake_irq(struct irq_data *d, unsigned int enable)
+static __init void tzic_init_gc(unsigned int irq_start)
{
- unsigned int index, off;
-
- index = d->irq >> 5;
- off = d->irq & 0x1F;
-
- if (index > 3)
- return -EINVAL;
-
- if (enable)
- wakeup_intr[index] |= (1 << off);
- else
- wakeup_intr[index] &= ~(1 << off);
-
- return 0;
+ struct irq_chip_generic *gc;
+ struct irq_chip_type *ct;
+ int idx = irq_start >> 5;
+
+ gc = irq_alloc_generic_chip("tzic", 1, irq_start, tzic_base,
+ handle_level_irq);
+ gc->private = tzic_set_irq_fiq;
+ gc->wake_enabled = IRQ_MSK(32);
+ wakeup_intr[idx] = &gc->wake_active;
+
+ ct = gc->chip_types;
+ ct->chip.irq_mask = irq_gc_mask_disable_reg;
+ ct->chip.irq_unmask = irq_gc_unmask_enable_reg;
+ ct->chip.irq_set_wake = irq_gc_set_wake;
+ ct->regs.disable = TZIC_ENCLEAR0(idx);
+ ct->regs.enable = TZIC_ENSET0(idx);
+
+ irq_setup_generic_chip(gc, IRQ_MSK(32), 0, IRQ_NOREQUEST, 0);
}
-static struct mxc_irq_chip mxc_tzic_chip = {
- .base = {
- .name = "MXC_TZIC",
- .irq_ack = tzic_mask_irq,
- .irq_mask = tzic_mask_irq,
- .irq_unmask = tzic_unmask_irq,
- .irq_set_wake = tzic_set_wake_irq,
- },
-#ifdef CONFIG_FIQ
- .set_irq_fiq = tzic_set_irq_fiq,
-#endif
-};
-
/*
* This function initializes the TZIC hardware and disables all the
* interrupts. It registers the interrupt enable and disable functions
/* all IRQ no FIQ Warning :: No selection */
- for (i = 0; i < TZIC_NUM_IRQS; i++) {
- irq_set_chip_and_handler(i, &mxc_tzic_chip.base,
- handle_level_irq);
- set_irq_flags(i, IRQF_VALID);
- }
+ for (i = 0; i < TZIC_NUM_IRQS; i += 32)
+ tzic_init_gc(i);
#ifdef CONFIG_FIQ
/* Initialize FIQ */
for (i = 0; i < 4; i++) {
v = is_idle ? __raw_readl(tzic_base + TZIC_ENSET0(i)) :
- wakeup_intr[i];
+ *wakeup_intr[i];
__raw_writel(v, tzic_base + TZIC_WAKEUP0(i));
}
config S5P_HRT
bool
+ select SAMSUNG_DEV_PWM
help
Use the High Resolution timer support
help
Compile in platform device definitions for FIMC controller 3
+config S5P_DEV_FIMD0
+ bool
+ help
+ Compile in platform device definitions for FIMD controller 0
+
+config S5P_DEV_MFC
+ bool
+ help
+ Compile in platform device definitions for MFC
+
config S5P_DEV_ONENAND
bool
help
obj-$(CONFIG_S5P_HRT) += s5p-time.o
# devices
-
+obj-$(CONFIG_S5P_DEV_MFC) += dev-mfc.o
obj-$(CONFIG_S5P_DEV_FIMC0) += dev-fimc0.o
obj-$(CONFIG_S5P_DEV_FIMC1) += dev-fimc1.o
obj-$(CONFIG_S5P_DEV_FIMC2) += dev-fimc2.o
obj-$(CONFIG_S5P_DEV_FIMC3) += dev-fimc3.o
+obj-$(CONFIG_S5P_DEV_FIMD0) += dev-fimd0.o
obj-$(CONFIG_S5P_DEV_ONENAND) += dev-onenand.o
obj-$(CONFIG_S5P_DEV_CSIS0) += dev-csis0.o
obj-$(CONFIG_S5P_DEV_CSIS1) += dev-csis1.o
--- /dev/null
+/* linux/arch/arm/plat-s5p/dev-fimd0.c
+ *
+ * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Core file for Samsung Display Controller (FIMD) driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+#include <linux/fb.h>
+#include <linux/gfp.h>
+#include <linux/dma-mapping.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/fb.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+static struct resource s5p_fimd0_resource[] = {
+ [0] = {
+ .start = S5P_PA_FIMD0,
+ .end = S5P_PA_FIMD0 + SZ_32K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_FIMD0_VSYNC,
+ .end = IRQ_FIMD0_VSYNC,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = IRQ_FIMD0_FIFO,
+ .end = IRQ_FIMD0_FIFO,
+ .flags = IORESOURCE_IRQ,
+ },
+ [3] = {
+ .start = IRQ_FIMD0_SYSTEM,
+ .end = IRQ_FIMD0_SYSTEM,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 fimd0_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device s5p_device_fimd0 = {
+ .name = "s5p-fb",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(s5p_fimd0_resource),
+ .resource = s5p_fimd0_resource,
+ .dev = {
+ .dma_mask = &fimd0_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+void __init s5p_fimd0_set_platdata(struct s3c_fb_platdata *pd)
+{
+ s3c_set_platdata(pd, sizeof(struct s3c_fb_platdata),
+ &s5p_device_fimd0);
+}
--- /dev/null
+/* linux/arch/arm/plat-s5p/dev-mfc.c
+ *
+ * Copyright (C) 2010-2011 Samsung Electronics Co.Ltd
+ *
+ * Base S5P MFC resource and device definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/memblock.h>
+#include <linux/ioport.h>
+
+#include <mach/map.h>
+#include <plat/devs.h>
+#include <plat/irqs.h>
+#include <plat/mfc.h>
+
+static struct resource s5p_mfc_resource[] = {
+ [0] = {
+ .start = S5P_PA_MFC,
+ .end = S5P_PA_MFC + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_MFC,
+ .end = IRQ_MFC,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+struct platform_device s5p_device_mfc = {
+ .name = "s5p-mfc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s5p_mfc_resource),
+ .resource = s5p_mfc_resource,
+};
+
+/*
+ * MFC hardware has 2 memory interfaces which are modelled as two separate
+ * platform devices to let dma-mapping distinguish between them.
+ *
+ * MFC parent device (s5p_device_mfc) must be registered before memory
+ * interface specific devices (s5p_device_mfc_l and s5p_device_mfc_r).
+ */
+
+static u64 s5p_mfc_dma_mask = DMA_BIT_MASK(32);
+
+struct platform_device s5p_device_mfc_l = {
+ .name = "s5p-mfc-l",
+ .id = -1,
+ .dev = {
+ .parent = &s5p_device_mfc.dev,
+ .dma_mask = &s5p_mfc_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+struct platform_device s5p_device_mfc_r = {
+ .name = "s5p-mfc-r",
+ .id = -1,
+ .dev = {
+ .parent = &s5p_device_mfc.dev,
+ .dma_mask = &s5p_mfc_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+struct s5p_mfc_reserved_mem {
+ phys_addr_t base;
+ unsigned long size;
+ struct device *dev;
+};
+
+static struct s5p_mfc_reserved_mem s5p_mfc_mem[2] __initdata;
+
+void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize,
+ phys_addr_t lbase, unsigned int lsize)
+{
+ int i;
+
+ s5p_mfc_mem[0].dev = &s5p_device_mfc_r.dev;
+ s5p_mfc_mem[0].base = rbase;
+ s5p_mfc_mem[0].size = rsize;
+
+ s5p_mfc_mem[1].dev = &s5p_device_mfc_l.dev;
+ s5p_mfc_mem[1].base = lbase;
+ s5p_mfc_mem[1].size = lsize;
+
+ for (i = 0; i < ARRAY_SIZE(s5p_mfc_mem); i++) {
+ struct s5p_mfc_reserved_mem *area = &s5p_mfc_mem[i];
+ if (memblock_remove(area->base, area->size)) {
+ printk(KERN_ERR "Failed to reserve memory for MFC device (%ld bytes at 0x%08lx)\n",
+ area->size, (unsigned long) area->base);
+ area->base = 0;
+ }
+ }
+}
+
+static int __init s5p_mfc_memory_init(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(s5p_mfc_mem); i++) {
+ struct s5p_mfc_reserved_mem *area = &s5p_mfc_mem[i];
+ if (!area->base)
+ continue;
+
+ if (dma_declare_coherent_memory(area->dev, area->base,
+ area->base, area->size,
+ DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE) == 0)
+ printk(KERN_ERR "Failed to declare coherent memory for MFC device (%ld bytes at 0x%08lx)\n",
+ area->size, (unsigned long) area->base);
+ }
+ return 0;
+}
+device_initcall(s5p_mfc_memory_init);
#define S5P_VA_COREPERI_BASE S3C_ADDR(0x02800000)
#define S5P_VA_COREPERI(x) (S5P_VA_COREPERI_BASE + (x))
#define S5P_VA_SCU S5P_VA_COREPERI(0x0)
-#define S5P_VA_GIC_CPU S5P_VA_COREPERI(0x100)
#define S5P_VA_TWD S5P_VA_COREPERI(0x600)
-#define S5P_VA_GIC_DIST S5P_VA_COREPERI(0x1000)
+
+#define S5P_VA_GIC_CPU S3C_ADDR(0x02810000)
+#define S5P_VA_GIC_DIST S3C_ADDR(0x02820000)
#define S3C_VA_USB_HSPHY S3C_ADDR(0x02900000)
--- /dev/null
+/*
+ * Copyright (C) 2011 Samsung Electronics Co.Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __PLAT_S5P_MFC_H
+#define __PLAT_S5P_MFC_H
+
+/**
+ * s5p_mfc_reserve_mem - function to early reserve memory for MFC driver
+ * @rbase: base address for MFC 'right' memory interface
+ * @rsize: size of the memory reserved for MFC 'right' interface
+ * @lbase: base address for MFC 'left' memory interface
+ * @lsize: size of the memory reserved for MFC 'left' interface
+ *
+ * This function reserves system memory for both MFC device memory
+ * interfaces and registers it to respective struct device entries as
+ * coherent memory.
+ */
+void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize,
+ phys_addr_t lbase, unsigned int lsize);
+
+#endif /* __PLAT_S5P_MFC_H */
#include <linux/clk.h>
#include <linux/interrupt.h>
#include <linux/io.h>
+#include <linux/regulator/consumer.h>
#include <plat/regs-adc.h>
#include <plat/adc.h>
*/
enum s3c_cpu_type {
- TYPE_S3C24XX,
- TYPE_S3C64XX
+ TYPE_ADCV1, /* S3C24XX */
+ TYPE_ADCV2, /* S3C64XX, S5P64X0, S5PC100 */
+ TYPE_ADCV3, /* S5PV210, S5PC110, EXYNOS4210 */
};
struct s3c_adc_client {
unsigned int prescale;
int irq;
+ struct regulator *vdd;
};
static struct adc_device *adc_dev;
struct s3c_adc_client *client)
{
unsigned con = readl(adc->regs + S3C2410_ADCCON);
+ enum s3c_cpu_type cpu = platform_get_device_id(adc->pdev)->driver_data;
client->select_cb(client, 1);
con &= ~S3C2410_ADCCON_STDBM;
con &= ~S3C2410_ADCCON_STARTMASK;
- if (!client->is_ts)
- con |= S3C2410_ADCCON_SELMUX(client->channel);
+ if (!client->is_ts) {
+ if (cpu == TYPE_ADCV3)
+ writel(client->channel & 0xf, adc->regs + S5P_ADCMUX);
+ else
+ con |= S3C2410_ADCCON_SELMUX(client->channel);
+ }
writel(con, adc->regs + S3C2410_ADCCON);
}
client->nr_samples--;
- if (cpu == TYPE_S3C64XX) {
- /* S3C64XX ADC resolution is 12-bit */
+ if (cpu != TYPE_ADCV1) {
+ /* S3C64XX/S5P ADC resolution is 12-bit */
data0 &= 0xfff;
data1 &= 0xfff;
} else {
}
exit:
- if (cpu == TYPE_S3C64XX) {
+ if (cpu != TYPE_ADCV1) {
/* Clear ADC interrupt */
writel(0, adc->regs + S3C64XX_ADCCLRINT);
}
adc->pdev = pdev;
adc->prescale = S3C2410_ADCCON_PRSCVL(49);
+ adc->vdd = regulator_get(dev, "vdd");
+ if (IS_ERR(adc->vdd)) {
+ dev_err(dev, "operating without regulator \"vdd\" .\n");
+ ret = PTR_ERR(adc->vdd);
+ goto err_alloc;
+ }
+
adc->irq = platform_get_irq(pdev, 1);
if (adc->irq <= 0) {
dev_err(dev, "failed to get adc irq\n");
ret = -ENOENT;
- goto err_alloc;
+ goto err_reg;
}
ret = request_irq(adc->irq, s3c_adc_irq, 0, dev_name(dev), adc);
if (ret < 0) {
dev_err(dev, "failed to attach adc irq\n");
- goto err_alloc;
+ goto err_reg;
}
adc->clk = clk_get(dev, "adc");
goto err_clk;
}
+ ret = regulator_enable(adc->vdd);
+ if (ret)
+ goto err_ioremap;
+
clk_enable(adc->clk);
tmp = adc->prescale | S3C2410_ADCCON_PRSCEN;
- if (platform_get_device_id(pdev)->driver_data == TYPE_S3C64XX) {
+ if (platform_get_device_id(pdev)->driver_data != TYPE_ADCV1) {
/* Enable 12-bit ADC resolution */
tmp |= S3C64XX_ADCCON_RESSEL;
}
return 0;
+ err_ioremap:
+ iounmap(adc->regs);
err_clk:
clk_put(adc->clk);
err_irq:
free_irq(adc->irq, adc);
-
+ err_reg:
+ regulator_put(adc->vdd);
err_alloc:
kfree(adc);
return ret;
iounmap(adc->regs);
free_irq(adc->irq, adc);
clk_disable(adc->clk);
+ regulator_disable(adc->vdd);
+ regulator_put(adc->vdd);
clk_put(adc->clk);
kfree(adc);
}
#ifdef CONFIG_PM
-static int s3c_adc_suspend(struct platform_device *pdev, pm_message_t state)
+static int s3c_adc_suspend(struct device *dev)
{
+ struct platform_device *pdev = container_of(dev,
+ struct platform_device, dev);
struct adc_device *adc = platform_get_drvdata(pdev);
unsigned long flags;
u32 con;
disable_irq(adc->irq);
spin_unlock_irqrestore(&adc->lock, flags);
clk_disable(adc->clk);
+ regulator_disable(adc->vdd);
return 0;
}
-static int s3c_adc_resume(struct platform_device *pdev)
+static int s3c_adc_resume(struct device *dev)
{
+ struct platform_device *pdev = container_of(dev,
+ struct platform_device, dev);
struct adc_device *adc = platform_get_drvdata(pdev);
+ int ret;
+ unsigned long tmp;
+ ret = regulator_enable(adc->vdd);
+ if (ret)
+ return ret;
clk_enable(adc->clk);
enable_irq(adc->irq);
- writel(adc->prescale | S3C2410_ADCCON_PRSCEN,
- adc->regs + S3C2410_ADCCON);
+ tmp = adc->prescale | S3C2410_ADCCON_PRSCEN;
+ /* Enable 12-bit ADC resolution */
+ if (platform_get_device_id(pdev)->driver_data != TYPE_ADCV1)
+ tmp |= S3C64XX_ADCCON_RESSEL;
+ writel(tmp, adc->regs + S3C2410_ADCCON);
return 0;
}
static struct platform_device_id s3c_adc_driver_ids[] = {
{
.name = "s3c24xx-adc",
- .driver_data = TYPE_S3C24XX,
+ .driver_data = TYPE_ADCV1,
}, {
.name = "s3c64xx-adc",
- .driver_data = TYPE_S3C64XX,
+ .driver_data = TYPE_ADCV2,
+ }, {
+ .name = "samsung-adc-v3",
+ .driver_data = TYPE_ADCV3,
},
{ }
};
MODULE_DEVICE_TABLE(platform, s3c_adc_driver_ids);
+static const struct dev_pm_ops adc_pm_ops = {
+ .suspend = s3c_adc_suspend,
+ .resume = s3c_adc_resume,
+};
+
static struct platform_driver s3c_adc_driver = {
.id_table = s3c_adc_driver_ids,
.driver = {
.name = "s3c-adc",
.owner = THIS_MODULE,
+ .pm = &adc_pm_ops,
},
.probe = s3c_adc_probe,
.remove = __devexit_p(s3c_adc_remove),
- .suspend = s3c_adc_suspend,
- .resume = s3c_adc_resume,
};
static int __init adc_init(void)
return ret;
}
-arch_initcall(adc_init);
+module_init(adc_init);
}
};
EXPORT_SYMBOL(samsung_asoc_dma);
+
+struct platform_device samsung_asoc_idma = {
+ .name = "samsung-idma",
+ .id = -1,
+ .dev = {
+ .dma_mask = &audio_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ }
+};
+EXPORT_SYMBOL(samsung_asoc_idma);
* Also corresponds to clocks of I2SMOD[10]
*/
const char **src_clk;
+ dma_addr_t idma_addr;
};
/**
extern struct platform_device s3c64xx_device_spi1;
extern struct platform_device samsung_asoc_dma;
+extern struct platform_device samsung_asoc_idma;
extern struct platform_device s3c64xx_device_pcm0;
extern struct platform_device s3c64xx_device_pcm1;
extern struct platform_device s3c_device_ts;
extern struct platform_device s3c_device_fb;
+extern struct platform_device s5p_device_fimd0;
extern struct platform_device s3c_device_ohci;
extern struct platform_device s3c_device_lcd;
extern struct platform_device s3c_device_wdt;
extern struct platform_device exynos4_device_spdif;
extern struct platform_device exynos4_device_pd[];
extern struct platform_device exynos4_device_ahci;
+extern struct platform_device exynos4_device_dwmci;
extern struct platform_device s5p6440_device_pcm;
extern struct platform_device s5p6440_device_iis;
extern struct platform_device s5p_device_fimc2;
extern struct platform_device s5p_device_fimc3;
+extern struct platform_device s5p_device_mfc;
+extern struct platform_device s5p_device_mfc_l;
+extern struct platform_device s5p_device_mfc_r;
extern struct platform_device s5p_device_mipi_csis0;
extern struct platform_device s5p_device_mipi_csis1;
#endif
}
+/* Re-define device name depending on support. */
+static inline void s5p_fb_setname(int id, char *name)
+{
+ switch (id) {
+#ifdef CONFIG_S5P_DEV_FIMD0
+ case 0:
+ s5p_device_fimd0.name = name;
+ break;
+#endif
+ default:
+ printk(KERN_ERR "%s: invalid device id(%d)\n", __func__, id);
+ break;
+ }
+}
+
#endif /* __ASM_PLAT_FB_CORE_H */
*/
extern void s3c_fb_set_platdata(struct s3c_fb_platdata *pd);
+/**
+ * s5p_fimd0_set_platdata() - Setup the FB device with platform data.
+ * @pd: The platform data to set. The data is copied from the passed structure
+ * so the machine data can mark the data __initdata so that any unused
+ * machines will end up dumping their data at runtime.
+ */
+extern void s5p_fimd0_set_platdata(struct s3c_fb_platdata *pd);
+
/**
* s3c64xx_fb_gpio_setup_24bpp() - S3C64XX setup function for 24bpp LCD
*
*/
extern void s5pv210_fb_gpio_setup_24bpp(void);
+/**
+ * exynos4_fimd0_gpio_setup_24bpp() - Exynos4 setup function for 24bpp LCD0
+ *
+ * Initialise the GPIO for an 24bpp LCD display on the RGB interface 0.
+ */
+extern void exynos4_fimd0_gpio_setup_24bpp(void);
+
#endif /* __PLAT_S3C_FB_H */
#define S3C2410_ADCDAT1 S3C2410_ADCREG(0x10)
#define S3C64XX_ADCUPDN S3C2410_ADCREG(0x14)
#define S3C64XX_ADCCLRINT S3C2410_ADCREG(0x18)
+#define S5P_ADCMUX S3C2410_ADCREG(0x1C)
#define S3C64XX_ADCCLRINTPNDNUP S3C2410_ADCREG(0x20)
#include <linux/irq.h>
#include <linux/io.h>
+#include <asm/mach/irq.h>
+
#include <mach/map.h>
#include <plat/irq-uart.h>
#include <plat/regs-serial.h>
static void s3c_irq_demux_uart(unsigned int irq, struct irq_desc *desc)
{
struct s3c_uart_irq *uirq = desc->irq_data.handler_data;
+ struct irq_chip *chip = irq_get_chip(irq);
u32 pend = __raw_readl(uirq->regs + S3C64XX_UINTP);
int base = uirq->base_irq;
+ chained_irq_enter(chip, desc);
+
if (pend & (1 << 0))
generic_handle_irq(base);
if (pend & (1 << 1))
generic_handle_irq(base + 2);
if (pend & (1 << 3))
generic_handle_irq(base + 3);
+
+ chained_irq_exit(chip, desc);
}
static void __init s3c_init_uart_irq(struct s3c_uart_irq *uirq)
/* save all necessary core registers not covered by the drivers */
s3c_pm_save_gpios();
+ s3c_pm_saved_gpios();
s3c_pm_save_uarts();
s3c_pm_save_core();
s3c_pm_restore_core();
s3c_pm_restore_uarts();
s3c_pm_restore_gpios();
+ s3c_pm_restored_gpios();
s3c_pm_debug_init();
}
static int __init sdma_get_firmware(struct sdma_engine *sdma,
- const char *cpu_name, int to_version)
+ const char *fw_name)
{
const struct firmware *fw;
char *fwname;
const struct sdma_script_start_addrs *addr;
unsigned short *ram_code;
- fwname = kasprintf(GFP_KERNEL, "sdma-%s-to%d.bin", cpu_name, to_version);
+ fwname = kasprintf(GFP_KERNEL, "%s", fw_name);
if (!fwname)
return -ENOMEM;
if (pdata->script_addrs)
sdma_add_scripts(sdma, pdata->script_addrs);
- sdma_get_firmware(sdma, pdata->cpu_name, pdata->to_version);
+ sdma_get_firmware(sdma, pdata->fw_name);
sdma->dma_device.dev = &pdev->dev;
git.openpandora.org / pandora-kernel.git / commitdiff