#define R8180_HW
typedef enum _VERSION_8190{
- // RTL8190
VERSION_8190_BD=0x3,
VERSION_8190_BE
}VERSION_8190,*PVERSION_8190;
BaseBand_Config_PHY_REG = 0, //Radio Path A
BaseBand_Config_AGC_TAB = 1, //Radio Path B
}BaseBand_Config_Type, *PBaseBand_Config_Type;
-#if 0
-typedef enum _RT_RF_TYPE_819xU{
- RF_TYPE_MIN = 0,
- RF_8225,
- RF_8256,
- RF_8258,
- RF_PSEUDO_11N = 4,
-}RT_RF_TYPE_819xU, *PRT_RF_TYPE_819xU;
-#endif
+
#define RTL8187_REQT_READ 0xc0
#define RTL8187_REQT_WRITE 0x40
#define RTL8187_REQ_GET_REGS 0x05
#define R8180_MAX_RETRY 255
#define MAX_TX_URB 5
#define MAX_RX_URB 16
-//#define MAX_RX_NORMAL_URB 3
-//#define MAX_RX_COMMAND_URB 2
#define RX_URB_SIZE 9100
#define BB_ANTATTEN_CHAN14 0x0c
#define BB_HOST_BANG_RW (1<<3)
#define BB_HOST_BANG_DATA 1
-//#if (RTL819X_FPGA_VER & RTL819X_FPGA_VIVI_070920)
#define RTL8190_EEPROM_ID 0x8129
#define EEPROM_VID 0x02
#define EEPROM_DID 0x04
#define EEPROM_TxPwIndex_OFDM_24G 0x3A //0x24~0x26
#define EEPROM_Default_TxPowerLevel 0x10
-//#define EEPROM_ChannelPlan 0x7c //0x7C
+
#define EEPROM_IC_VER 0x7d //0x7D
#define EEPROM_CRC 0x7e //0x7E~0x7F
#define EEPROM_CID_Pronet 0x7
#define EEPROM_CID_DLINK 0x8
#define EEPROM_CID_WHQL 0xFE //added by sherry for dtm, 20080728
-//#endif
+
enum _RTL8192Pci_HW {
MAC0 = 0x000,
MAC1 = 0x001,
DRIVER_RSSI = 0x32c, // Driver tell Firmware current RSSI
MCS_TXAGC = 0x340, // MCS AGC
CCK_TXAGC = 0x348, // CCK AGC
-// IMR = 0x354, // Interrupt Mask Register
-// IMR_POLL = 0x360,
MacBlkCtrl = 0x403, // Mac block on/off control register
- //Cmd9346CR = 0x00e,
-//#define Cmd9346CR_9356SEL (1<<4)
-#if 0
-/* 0x0006 - 0x0007 - reserved */
- RXFIFOCOUNT = 0x010,
- TXFIFOCOUNT = 0x012,
- BQREQ = 0x013,
-/* 0x0010 - 0x0017 - reserved */
- TSFTR = 0x018,
- TLPDA = 0x020,
- TNPDA = 0x024,
- THPDA = 0x028,
- BSSID = 0x02E,
- RESP_RATE = 0x034,
- CMD = 0x037,
-#define CMD_RST_SHIFT 4
-#define CMD_RESERVED_MASK ((1<<1) | (1<<5) | (1<<6) | (1<<7))
-#define CMD_RX_ENABLE_SHIFT 3
-#define CMD_TX_ENABLE_SHIFT 2
-#define CR_RST ((1<< 4))
-#define CR_RE ((1<< 3))
-#define CR_TE ((1<< 2))
-#define CR_MulRW ((1<< 0))
-
- INTA = 0x03e,
-#endif
-
-///////////////////
-//////////////////
-#if 0
- TX_CONF = 0x040,
-#define TX_CONF_HEADER_AUTOICREMENT_SHIFT 30
-#define TX_LOOPBACK_SHIFT 17
-#define TX_LOOPBACK_MAC 1
-#define TX_LOOPBACK_BASEBAND 2
-#define TX_LOOPBACK_NONE 0
-#define TX_LOOPBACK_CONTINUE 3
-#define TX_LOOPBACK_MASK ((1<<17)|(1<<18))
-#define TX_LRLRETRY_SHIFT 0
-#define TX_SRLRETRY_SHIFT 8
-#define TX_NOICV_SHIFT 19
-#define TX_NOCRC_SHIFT 16
-#define TCR_DurProcMode ((1<<30))
-#define TCR_DISReqQsize ((1<<28))
-#define TCR_HWVERID_MASK ((1<<27)|(1<<26)|(1<<25))
-#define TCR_HWVERID_SHIFT 25
-#define TCR_SWPLCPLEN ((1<<24))
-#define TCR_PLCP_LEN TCR_SAT // rtl8180
-#define TCR_MXDMA_MASK ((1<<23)|(1<<22)|(1<<21))
-#define TCR_MXDMA_1024 6
-#define TCR_MXDMA_2048 7
-#define TCR_MXDMA_SHIFT 21
-#define TCR_DISCW ((1<<20))
-#define TCR_ICV ((1<<19))
-#define TCR_LBK ((1<<18)|(1<<17))
-#define TCR_LBK1 ((1<<18))
-#define TCR_LBK0 ((1<<17))
-#define TCR_CRC ((1<<16))
-#define TCR_SRL_MASK ((1<<15)|(1<<14)|(1<<13)|(1<<12)|(1<<11)|(1<<10)|(1<<9)|(1<<8))
-#define TCR_LRL_MASK ((1<<0)|(1<<1)|(1<<2)|(1<<3)|(1<<4)|(1<<5)|(1<<6)|(1<<7))
-#define TCR_PROBE_NOTIMESTAMP_SHIFT 29 //rtl8185
-
- RX_CONF = 0x044,
-#define MAC_FILTER_MASK ((1<<0) | (1<<1) | (1<<2) | (1<<3) | (1<<5) | \
-(1<<12) | (1<<18) | (1<<19) | (1<<20) | (1<<21) | (1<<22) | (1<<23))
-#define RX_CHECK_BSSID_SHIFT 23
-#define ACCEPT_PWR_FRAME_SHIFT 22
-#define ACCEPT_MNG_FRAME_SHIFT 20
-#define ACCEPT_CTL_FRAME_SHIFT 19
-#define ACCEPT_DATA_FRAME_SHIFT 18
-#define ACCEPT_ICVERR_FRAME_SHIFT 12
-#define ACCEPT_CRCERR_FRAME_SHIFT 5
-#define ACCEPT_BCAST_FRAME_SHIFT 3
-#define ACCEPT_MCAST_FRAME_SHIFT 2
-#define ACCEPT_ALLMAC_FRAME_SHIFT 0
-#define ACCEPT_NICMAC_FRAME_SHIFT 1
-#define RX_FIFO_THRESHOLD_MASK ((1<<13) | (1<<14) | (1<<15))
-#define RX_FIFO_THRESHOLD_SHIFT 13
-#define RX_FIFO_THRESHOLD_128 3
-#define RX_FIFO_THRESHOLD_256 4
-#define RX_FIFO_THRESHOLD_512 5
-#define RX_FIFO_THRESHOLD_1024 6
-#define RX_FIFO_THRESHOLD_NONE 7
-#define RX_AUTORESETPHY_SHIFT 28
-#define MAX_RX_DMA_MASK ((1<<8) | (1<<9) | (1<<10))
-#define MAX_RX_DMA_2048 7
-#define MAX_RX_DMA_1024 6
-#define MAX_RX_DMA_SHIFT 10
-#define RCR_ONLYERLPKT ((1<<31))
-#define RCR_CS_SHIFT 29
-#define RCR_CS_MASK ((1<<30) | (1<<29))
-#define RCR_ENMARP ((1<<28))
-#define RCR_CBSSID ((1<<23))
-#define RCR_APWRMGT ((1<<22))
-#define RCR_ADD3 ((1<<21))
-#define RCR_AMF ((1<<20))
-#define RCR_ACF ((1<<19))
-#define RCR_ADF ((1<<18))
-#define RCR_RXFTH ((1<<15)|(1<<14)|(1<<13))
-#define RCR_RXFTH2 ((1<<15))
-#define RCR_RXFTH1 ((1<<14))
-#define RCR_RXFTH0 ((1<<13))
-#define RCR_AICV ((1<<12))
-#define RCR_MXDMA ((1<<10)|(1<< 9)|(1<< 8))
-#define RCR_MXDMA2 ((1<<10))
-#define RCR_MXDMA1 ((1<< 9))
-#define RCR_MXDMA0 ((1<< 8))
-#define RCR_9356SEL ((1<< 6))
-#define RCR_ACRC32 ((1<< 5))
-#define RCR_AB ((1<< 3))
-#define RCR_AM ((1<< 2))
-#define RCR_APM ((1<< 1))
-#define RCR_AAP ((1<< 0))
-
- INT_TIMEOUT = 0x048,
-
- TX_BEACON_RING_ADDR = 0x04c,
-
-#endif
-#if 0
- CONFIG0 = 0x051,
-#define CONFIG0_WEP104 ((1<<6))
-#define CONFIG0_LEDGPO_En ((1<<4))
-#define CONFIG0_Aux_Status ((1<<3))
-#define CONFIG0_GL ((1<<1)|(1<<0))
-#define CONFIG0_GL1 ((1<<1))
-#define CONFIG0_GL0 ((1<<0))
- CONFIG1 = 0x052,
-#define CONFIG1_LEDS ((1<<7)|(1<<6))
-#define CONFIG1_LEDS1 ((1<<7))
-#define CONFIG1_LEDS0 ((1<<6))
-#define CONFIG1_LWACT ((1<<4))
-#define CONFIG1_MEMMAP ((1<<3))
-#define CONFIG1_IOMAP ((1<<2))
-#define CONFIG1_VPD ((1<<1))
-#define CONFIG1_PMEn ((1<<0))
- CONFIG2 = 0x053,
-#define CONFIG2_LCK ((1<<7))
-#define CONFIG2_ANT ((1<<6))
-#define CONFIG2_DPS ((1<<3))
-#define CONFIG2_PAPE_sign ((1<<2))
-#define CONFIG2_PAPE_time ((1<<1)|(1<<0))
-#define CONFIG2_PAPE_time1 ((1<<1))
-#define CONFIG2_PAPE_time0 ((1<<0))
- ANA_PARAM = 0x054,
- CONFIG3 = 0x059,
-#define CONFIG3_GNTSel ((1<<7))
-#define CONFIG3_PARM_En ((1<<6))
-#define CONFIG3_Magic ((1<<5))
-#define CONFIG3_CardB_En ((1<<3))
-#define CONFIG3_CLKRUN_En ((1<<2))
-#define CONFIG3_FuncRegEn ((1<<1))
-#define CONFIG3_FBtbEn ((1<<0))
-#define CONFIG3_CLKRUN_SHIFT 2
-#define CONFIG3_ANAPARAM_W_SHIFT 6
- CONFIG4 = 0x05a,
-#define CONFIG4_VCOPDN ((1<<7))
-#define CONFIG4_PWROFF ((1<<6))
-#define CONFIG4_PWRMGT ((1<<5))
-#define CONFIG4_LWPME ((1<<4))
-#define CONFIG4_LWPTN ((1<<2))
-#define CONFIG4_RFTYPE ((1<<1)|(1<<0))
-#define CONFIG4_RFTYPE1 ((1<<1))
-#define CONFIG4_RFTYPE0 ((1<<0))
- TESTR = 0x05b,
-#define TFPC_AC 0x05C
-
-#define SCR 0x05F
- PGSELECT = 0x05e,
-#define PGSELECT_PG_SHIFT 0
- SECURITY = 0x05f,
-#define SECURITY_WEP_TX_ENABLE_SHIFT 1
-#define SECURITY_WEP_RX_ENABLE_SHIFT 0
-#define SECURITY_ENCRYP_104 1
-#define SECURITY_ENCRYP_SHIFT 4
-#define SECURITY_ENCRYP_MASK ((1<<4)|(1<<5))
-
- ANA_PARAM2 = 0x060,
- BEACON_INTERVAL = 0x070,
-#define BEACON_INTERVAL_MASK ((1<<0)|(1<<1)|(1<<2)|(1<<3)|(1<<4)|(1<<5)| \
-(1<<6)|(1<<7)|(1<<8)|(1<<9))
-
- ATIM_WND = 0x072,
-#define ATIM_WND_MASK (0x01FF)
-
- BCN_INTR_ITV = 0x074,
-#define BCN_INTR_ITV_MASK (0x01FF)
-
- ATIM_INTR_ITV = 0x076,
-#define ATIM_INTR_ITV_MASK (0x01FF)
-
- AckTimeOutReg = 0x079, //ACK timeout register, in unit of 4 us.
- PHY_ADR = 0x07c,
- PHY_READ = 0x07e,
- RFPinsOutput = 0x080,
- RFPinsEnable = 0x082,
-//Page 0
- RFPinsSelect = 0x084,
-#define SW_CONTROL_GPIO 0x400
- RFPinsInput = 0x086,
- RF_PARA = 0x088,
- RF_TIMING = 0x08c,
- GP_ENABLE = 0x090,
- GPIO = 0x091,
- TX_AGC_CTL = 0x09c,
-#define TX_AGC_CTL_PER_PACKET_TXAGC 0x01
-#define TX_AGC_CTL_PERPACKET_GAIN_SHIFT 0
-#define TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT 1
-#define TX_AGC_CTL_FEEDBACK_ANT 2
-#define TXAGC_CTL_PER_PACKET_ANT_SEL 0x02
- OFDM_TXAGC = 0x09e,
- ANTSEL = 0x09f,
-
-
-
- SIFS = 0x0b4,
- DIFS = 0x0b5,
- SLOT = 0x0b6,
- CW_CONF = 0x0bc,
-#define CW_CONF_PERPACKET_RETRY_LIMIT 0x02
-#define CW_CONF_PERPACKET_CW 0x01
-#define CW_CONF_PERPACKET_RETRY_SHIFT 1
-#define CW_CONF_PERPACKET_CW_SHIFT 0
- CW_VAL = 0x0bd,
- RATE_FALLBACK = 0x0be,
-#define MAX_RESP_RATE_SHIFT 4
-#define MIN_RESP_RATE_SHIFT 0
-#define RATE_FALLBACK_CTL_ENABLE 0x80
-#define RATE_FALLBACK_CTL_AUTO_STEP0 0x00
- ACM_CONTROL = 0x0BF, // ACM Control Registe
-//----------------------------------------------------------------------------
-// 8187B ACM_CONTROL bits (Offset 0xBF, 1 Byte)
-//----------------------------------------------------------------------------
-#define VOQ_ACM_EN (0x01 << 7) //BIT7
-#define VIQ_ACM_EN (0x01 << 6) //BIT6
-#define BEQ_ACM_EN (0x01 << 5) //BIT5
-#define ACM_HW_EN (0x01 << 4) //BIT4
-#define TXOPSEL (0x01 << 3) //BIT3
-#define VOQ_ACM_CTL (0x01 << 2) //BIT2 // Set to 1 when AC_VO used time reaches or exceeds the admitted time
-#define VIQ_ACM_CTL (0x01 << 1) //BIT1 // Set to 1 when AC_VI used time reaches or exceeds the admitted time
-#define BEQ_ACM_CTL (0x01 << 0) //BIT0 // Set to 1 when AC_BE used time reaches or exceeds the admitted time
- CONFIG5 = 0x0D8,
-#define CONFIG5_TX_FIFO_OK ((1<<7))
-#define CONFIG5_RX_FIFO_OK ((1<<6))
-#define CONFIG5_CALON ((1<<5))
-#define CONFIG5_EACPI ((1<<2))
-#define CONFIG5_LANWake ((1<<1))
-#define CONFIG5_PME_STS ((1<<0))
- TX_DMA_POLLING = 0x0fd,
-#define TX_DMA_POLLING_BEACON_SHIFT 7
-#define TX_DMA_POLLING_HIPRIORITY_SHIFT 6
-#define TX_DMA_POLLING_NORMPRIORITY_SHIFT 5
-#define TX_DMA_POLLING_LOWPRIORITY_SHIFT 4
-#define TX_DMA_STOP_BEACON_SHIFT 3
-#define TX_DMA_STOP_HIPRIORITY_SHIFT 2
-#define TX_DMA_STOP_NORMPRIORITY_SHIFT 1
-#define TX_DMA_STOP_LOWPRIORITY_SHIFT 0
- CWR = 0x0DC,
- RetryCTR = 0x0DE,
- INT_MIG = 0x0E2, // Interrupt Migration (0xE2 ~ 0xE3)
- TID_AC_MAP = 0x0E8, // TID to AC Mapping Register
- ANA_PARAM3 = 0x0EE,
-
-
-//page 1
- Wakeup0 = 0x084,
- Wakeup1 = 0x08C,
- Wakeup2LD = 0x094,
- Wakeup2HD = 0x09C,
- Wakeup3LD = 0x0A4,
- Wakeup3HD = 0x0AC,
- Wakeup4LD = 0x0B4,
- Wakeup4HD = 0x0BC,
- CRC0 = 0x0C4,
- CRC1 = 0x0C6,
- CRC2 = 0x0C8,
- CRC3 = 0x0CA,
- CRC4 = 0x0CC,
-/* 0x00CE - 0x00D3 - reserved */
-
- RFSW_CTRL = 0x272, // 0x272-0x273.
-
-/**************************************************************************/
- FER = 0x0F0,
- FEMR = 0x0F4,
- FPSR = 0x0F8,
- FFER = 0x0FC,
-
- AC_VO_PARAM = 0x0F0, // AC_VO Parameters Record
- AC_VI_PARAM = 0x0F4, // AC_VI Parameters Record
- AC_BE_PARAM = 0x0F8, // AC_BE Parameters Record
- AC_BK_PARAM = 0x0FC, // AC_BK Parameters Record
- TALLY_SEL = 0x0fc,
-#endif
-}
-;
-//----------------------------------------------------------------------------
-// 818xB AnaParm & AnaParm2 Register
-//----------------------------------------------------------------------------
-//#define ANAPARM_ASIC_ON 0x45090658
-//#define ANAPARM2_ASIC_ON 0x727f3f52
+};
#define GPI 0x108
#define GPO 0x109
git.openpandora.org / pandora-kernel.git / commitdiff