#include <linux/net.h>
#include <linux/compat.h>
#include <net/compat.h>
+#include <net/sock.h>
#include <asm/uaccess.h>
#include <asm/string.h>
{
struct socket *sock;
char address[MAX_SOCK_ADDR];
- struct iovec iov[UIO_FASTIOV];
+ struct iovec iovstack[UIO_FASTIOV], *iov = iovstack;
unsigned char ctl[sizeof(struct cmsghdr) + 20];
unsigned char *ctl_buf = ctl;
- struct msghdr kern_msg;
- int err, total_len;
+ struct msghdr msg_sys;
+ int err, ctl_len, iov_size, total_len;
- if(msghdr_from_user32_to_kern(&kern_msg, user_msg))
- return -EFAULT;
- if(kern_msg.msg_iovlen > UIO_MAXIOV)
- return -EINVAL;
- err = verify_compat_iovec(&kern_msg, iov, address, VERIFY_READ);
- if (err < 0)
+ err = -EFAULT;
+ if (msghdr_from_user32_to_kern(&msg_sys, user_msg))
+ goto out;
+
+ sock = sockfd_lookup(fd, &err);
+ if (!sock)
goto out;
+
+ /* do not move before msg_sys is valid */
+ err = -EMSGSIZE;
+ if (msg_sys.msg_iovlen > UIO_MAXIOV)
+ goto out_put;
+
+ /* Check whether to allocate the iovec area*/
+ err = -ENOMEM;
+ iov_size = msg_sys.msg_iovlen * sizeof(struct iovec);
+ if (msg_sys.msg_iovlen > UIO_FASTIOV) {
+ iov = sock_kmalloc(sock->sk, iov_size, GFP_KERNEL);
+ if (!iov)
+ goto out_put;
+ }
+
+ err = verify_compat_iovec(&msg_sys, iov, address, VERIFY_READ);
+ if (err < 0)
+ goto out_freeiov;
total_len = err;
- if(kern_msg.msg_controllen) {
- struct sol_cmsghdr __user *ucmsg = kern_msg.msg_control;
+ err = -ENOBUFS;
+ if (msg_sys.msg_controllen > INT_MAX)
+ goto out_freeiov;
+
+ ctl_len = msg_sys.msg_controllen;
+ if (ctl_len) {
+ struct sol_cmsghdr __user *ucmsg = msg_sys.msg_control;
unsigned long *kcmsg;
compat_size_t cmlen;
- if (kern_msg.msg_controllen <= sizeof(compat_size_t))
- return -EINVAL;
+ err = -EINVAL;
+ if (ctl_len <= sizeof(compat_size_t))
+ goto out_freeiov;
- if(kern_msg.msg_controllen > sizeof(ctl)) {
+ if (ctl_len > sizeof(ctl)) {
err = -ENOBUFS;
- ctl_buf = kmalloc(kern_msg.msg_controllen, GFP_KERNEL);
- if(!ctl_buf)
+ ctl_buf = kmalloc(ctl_len, GFP_KERNEL);
+ if (!ctl_buf)
goto out_freeiov;
}
__get_user(cmlen, &ucmsg->cmsg_len);
kcmsg = (unsigned long *) ctl_buf;
*kcmsg++ = (unsigned long)cmlen;
err = -EFAULT;
- if(copy_from_user(kcmsg, &ucmsg->cmsg_level,
- kern_msg.msg_controllen - sizeof(compat_size_t)))
+ if (copy_from_user(kcmsg, &ucmsg->cmsg_level,
+ ctl_len - sizeof(compat_size_t)))
goto out_freectl;
- kern_msg.msg_control = ctl_buf;
+ msg_sys.msg_control = ctl_buf;
}
- kern_msg.msg_flags = solaris_to_linux_msgflags(user_flags);
+ msg_sys.msg_flags = solaris_to_linux_msgflags(user_flags);
- lock_kernel();
- sock = sockfd_lookup(fd, &err);
- if (sock != NULL) {
- if (sock->file->f_flags & O_NONBLOCK)
- kern_msg.msg_flags |= MSG_DONTWAIT;
- err = sock_sendmsg(sock, &kern_msg, total_len);
- sockfd_put(sock);
- }
- unlock_kernel();
+ if (sock->file->f_flags & O_NONBLOCK)
+ msg_sys.msg_flags |= MSG_DONTWAIT;
+ err = sock_sendmsg(sock, &msg_sys, total_len);
out_freectl:
- /* N.B. Use kfree here, as kern_msg.msg_controllen might change? */
- if(ctl_buf != ctl)
- kfree(ctl_buf);
+ if (ctl_buf != ctl)
+ sock_kfree_s(sock->sk, ctl_buf, ctl_len);
out_freeiov:
- if(kern_msg.msg_iov != iov)
- kfree(kern_msg.msg_iov);
-out:
+ if (iov != iovstack)
+ sock_kfree_s(sock->sk, iov, iov_size);
+out_put:
+ sockfd_put(sock);
+out:
return err;
}
asmlinkage int solaris_recvmsg(int fd, struct sol_nmsghdr __user *user_msg, unsigned int user_flags)
{
- struct iovec iovstack[UIO_FASTIOV];
- struct msghdr kern_msg;
- char addr[MAX_SOCK_ADDR];
struct socket *sock;
+ struct iovec iovstack[UIO_FASTIOV];
struct iovec *iov = iovstack;
+ struct msghdr msg_sys;
+ unsigned long cmsg_ptr;
+ int err, iov_size, total_len, len;
+
+ /* kernel mode address */
+ char addr[MAX_SOCK_ADDR];
+
+ /* user mode address pointers */
struct sockaddr __user *uaddr;
int __user *uaddr_len;
- unsigned long cmsg_ptr;
- int err, total_len, len = 0;
- if(msghdr_from_user32_to_kern(&kern_msg, user_msg))
+ if (msghdr_from_user32_to_kern(&msg_sys, user_msg))
return -EFAULT;
- if(kern_msg.msg_iovlen > UIO_MAXIOV)
- return -EINVAL;
- uaddr = kern_msg.msg_name;
+ sock = sockfd_lookup(fd, &err);
+ if (!sock)
+ goto out;
+
+ err = -EMSGSIZE;
+ if (msg_sys.msg_iovlen > UIO_MAXIOV)
+ goto out_put;
+
+ /* Check whether to allocate the iovec area*/
+ err = -ENOMEM;
+ iov_size = msg_sys.msg_iovlen * sizeof(struct iovec);
+ if (msg_sys.msg_iovlen > UIO_FASTIOV) {
+ iov = sock_kmalloc(sock->sk, iov_size, GFP_KERNEL);
+ if (!iov)
+ goto out_put;
+ }
+
+ /*
+ * Save the user-mode address (verify_iovec will change the
+ * kernel msghdr to use the kernel address space)
+ */
+
+ uaddr = (void __user *) msg_sys.msg_name;
uaddr_len = &user_msg->msg_namelen;
- err = verify_compat_iovec(&kern_msg, iov, addr, VERIFY_WRITE);
+ err = verify_compat_iovec(&msg_sys, iov, addr, VERIFY_WRITE);
if (err < 0)
- goto out;
+ goto out_freeiov;
total_len = err;
- cmsg_ptr = (unsigned long) kern_msg.msg_control;
- kern_msg.msg_flags = 0;
+ cmsg_ptr = (unsigned long) msg_sys.msg_control;
+ msg_sys.msg_flags = MSG_CMSG_COMPAT;
- lock_kernel();
- sock = sockfd_lookup(fd, &err);
- if (sock != NULL) {
- if (sock->file->f_flags & O_NONBLOCK)
- user_flags |= MSG_DONTWAIT;
- err = sock_recvmsg(sock, &kern_msg, total_len, user_flags);
- if(err >= 0)
- len = err;
- sockfd_put(sock);
- }
- unlock_kernel();
-
- if(uaddr != NULL && err >= 0)
- err = move_addr_to_user(addr, kern_msg.msg_namelen, uaddr, uaddr_len);
- if(err >= 0) {
- err = __put_user(linux_to_solaris_msgflags(kern_msg.msg_flags), &user_msg->msg_flags);
- if(!err) {
- /* XXX Convert cmsg back into userspace 32-bit format... */
- err = __put_user((unsigned long)kern_msg.msg_control - cmsg_ptr,
- &user_msg->msg_controllen);
- }
+ if (sock->file->f_flags & O_NONBLOCK)
+ user_flags |= MSG_DONTWAIT;
+
+ err = sock_recvmsg(sock, &msg_sys, total_len, user_flags);
+ if(err < 0)
+ goto out_freeiov;
+
+ len = err;
+
+ if (uaddr != NULL) {
+ err = move_addr_to_user(addr, msg_sys.msg_namelen, uaddr, uaddr_len);
+ if (err < 0)
+ goto out_freeiov;
}
+ err = __put_user(linux_to_solaris_msgflags(msg_sys.msg_flags), &user_msg->msg_flags);
+ if (err)
+ goto out_freeiov;
+ err = __put_user((unsigned long)msg_sys.msg_control - cmsg_ptr,
+ &user_msg->msg_controllen);
+ if (err)
+ goto out_freeiov;
+ err = len;
- if(kern_msg.msg_iov != iov)
- kfree(kern_msg.msg_iov);
+out_freeiov:
+ if (iov != iovstack)
+ sock_kfree_s(sock->sk, iov, iov_size);
+out_put:
+ sockfd_put(sock);
out:
- if(err < 0)
- return err;
- return len;
+ return err;
}
/*
- * i8xx_tco 0.07: TCO timer driver for i8xx chipsets
+ * i8xx_tco: TCO timer driver for i8xx chipsets
*
* (c) Copyright 2000 kernel concepts <nils@kernelconcepts.de>, All Rights Reserved.
* http://www.kernelconcepts.de
* 20050128 Wim Van Sebroeck <wim@iguana.be>
* 0.07 Added support for the ICH4-M, ICH6, ICH6R, ICH6-M, ICH6W and ICH6RW
* chipsets. Also added support for the "undocumented" ICH7 chipset.
+ * 20050807 Wim Van Sebroeck <wim@iguana.be>
+ * 0.08 Make sure that the watchdog is only "armed" when started.
+ * (Kernel Bug 4251)
*/
/*
#include "i8xx_tco.h"
/* Module and version information */
-#define TCO_VERSION "0.07"
+#define TCO_VERSION "0.08"
#define TCO_MODULE_NAME "i8xx TCO timer"
#define TCO_DRIVER_NAME TCO_MODULE_NAME ", v" TCO_VERSION
#define PFX TCO_MODULE_NAME ": "
unsigned char val;
spin_lock(&tco_lock);
+
+ /* disable chipset's NO_REBOOT bit */
+ pci_read_config_byte (i8xx_tco_pci, 0xd4, &val);
+ val &= 0xfd;
+ pci_write_config_byte (i8xx_tco_pci, 0xd4, val);
+
+ /* Bit 11: TCO Timer Halt -> 0 = The TCO timer is enabled to count */
val = inb (TCO1_CNT + 1);
val &= 0xf7;
outb (val, TCO1_CNT + 1);
val = inb (TCO1_CNT + 1);
+
spin_unlock(&tco_lock);
if (val & 0x08)
static int tco_timer_stop (void)
{
- unsigned char val;
+ unsigned char val, val1;
spin_lock(&tco_lock);
+ /* Bit 11: TCO Timer Halt -> 1 = The TCO timer is disabled */
val = inb (TCO1_CNT + 1);
val |= 0x08;
outb (val, TCO1_CNT + 1);
val = inb (TCO1_CNT + 1);
+
+ /* Set the NO_REBOOT bit to prevent later reboots, just for sure */
+ pci_read_config_byte (i8xx_tco_pci, 0xd4, &val1);
+ val1 |= 0x02;
+ pci_write_config_byte (i8xx_tco_pci, 0xd4, val1);
+
spin_unlock(&tco_lock);
if ((val & 0x08) == 0)
static int tco_timer_keepalive (void)
{
spin_lock(&tco_lock);
+ /* Reload the timer by writing to the TCO Timer Reload register */
outb (0x01, TCO1_RLD);
spin_unlock(&tco_lock);
return 0;
printk (KERN_ERR PFX "failed to get TCOBASE address\n");
return 0;
}
- /*
- * Check chipset's NO_REBOOT bit
- */
+
+ /* Check chipset's NO_REBOOT bit */
pci_read_config_byte (i8xx_tco_pci, 0xd4, &val1);
if (val1 & 0x02) {
val1 &= 0xfd;
return 0; /* Cannot reset NO_REBOOT bit */
}
}
+ /* Disable reboots untill the watchdog starts */
+ val1 |= 0x02;
+ pci_write_config_byte (i8xx_tco_pci, 0xd4, val1);
+
/* Set the TCO_EN bit in SMI_EN register */
if (!request_region (SMI_EN + 1, 1, "i8xx TCO")) {
printk (KERN_ERR PFX "I/O address 0x%04x already in use\n",
static void __exit watchdog_cleanup (void)
{
- u8 val;
-
/* Stop the timer before we leave */
if (!nowayout)
tco_timer_stop ();
- /* Set the NO_REBOOT bit to prevent later reboots, just for sure */
- pci_read_config_byte (i8xx_tco_pci, 0xd4, &val);
- val |= 0x02;
- pci_write_config_byte (i8xx_tco_pci, 0xd4, val);
-
/* Deregister */
misc_deregister (&i8xx_tco_miscdev);
unregister_reboot_notifier(&i8xx_tco_notifier);
#include <asm/sibyte/sb1250_smbus.h>
static struct i2c_algo_sibyte_data sibyte_board_data[2] = {
- { NULL, 0, (void *) (KSEG1+A_SMB_BASE(0)) },
- { NULL, 1, (void *) (KSEG1+A_SMB_BASE(1)) }
+ { NULL, 0, (void *) (CKSEG1+A_SMB_BASE(0)) },
+ { NULL, 1, (void *) (CKSEG1+A_SMB_BASE(1)) }
};
static struct i2c_adapter sibyte_board_adapter[2] = {
To compile this support as a module, choose M here: the
module will be called i2o_config.
+ Note: If you want to use the new API you have to download the
+ i2o_config patch from http://i2o.shadowconnect.com/
+
config I2O_CONFIG_OLD_IOCTL
bool "Enable ioctls (OBSOLETE)"
depends on I2O_CONFIG
static struct i2o_driver i2o_config_driver;
-/* Special file operations for sysfs */
-struct fops_attribute {
- struct bin_attribute bin;
- struct file_operations fops;
-};
-
-/**
- * sysfs_read_dummy
- */
-static ssize_t sysfs_read_dummy(struct kobject *kobj, char *buf, loff_t offset,
- size_t count)
-{
- return 0;
-};
-
-/**
- * sysfs_write_dummy
- */
-static ssize_t sysfs_write_dummy(struct kobject *kobj, char *buf, loff_t offset,
- size_t count)
-{
- return 0;
-};
-
-/**
- * sysfs_create_fops_file - Creates attribute with special file operations
- * @kobj: kobject which should contains the attribute
- * @attr: attributes which should be used to create file
- *
- * First creates attribute @attr in kobject @kobj. If it is the first time
- * this function is called, merge old fops from sysfs with new one and
- * write it back. Afterwords the new fops will be set for the created
- * attribute.
- *
- * Returns 0 on success or negative error code on failure.
- */
-static int sysfs_create_fops_file(struct kobject *kobj,
- struct fops_attribute *attr)
-{
- struct file_operations tmp, *fops;
- struct dentry *d;
- struct qstr qstr;
- int rc;
-
- fops = &attr->fops;
-
- if (fops->read)
- attr->bin.read = sysfs_read_dummy;
-
- if (fops->write)
- attr->bin.write = sysfs_write_dummy;
-
- if ((rc = sysfs_create_bin_file(kobj, &attr->bin)))
- return rc;
-
- qstr.name = attr->bin.attr.name;
- qstr.len = strlen(qstr.name);
- qstr.hash = full_name_hash(qstr.name, qstr.len);
-
- if ((d = lookup_hash(&qstr, kobj->dentry))) {
- if (!fops->owner) {
- memcpy(&tmp, d->d_inode->i_fop, sizeof(tmp));
- if (fops->read)
- tmp.read = fops->read;
- if (fops->write)
- tmp.write = fops->write;
- memcpy(fops, &tmp, sizeof(tmp));
- }
-
- d->d_inode->i_fop = fops;
- } else
- sysfs_remove_bin_file(kobj, &attr->bin);
-
- return -ENOENT;
-};
-
-/**
- * sysfs_remove_fops_file - Remove attribute with special file operations
- * @kobj: kobject which contains the attribute
- * @attr: attributes which are used to create file
- *
- * Only wrapper arround sysfs_remove_bin_file()
- *
- * Returns 0 on success or negative error code on failure.
- */
-static inline int sysfs_remove_fops_file(struct kobject *kobj,
- struct fops_attribute *attr)
-{
- return sysfs_remove_bin_file(kobj, &attr->bin);
-};
-
-/**
- * i2o_config_read_hrt - Returns the HRT of the controller
- * @kob: kernel object handle
- * @buf: buffer into which the HRT should be copied
- * @off: file offset
- * @count: number of bytes to read
- *
- * Put @count bytes starting at @off into @buf from the HRT of the I2O
- * controller corresponding to @kobj.
- *
- * Returns number of bytes copied into buffer.
- */
-static ssize_t i2o_config_read_hrt(struct kobject *kobj, char *buf,
- loff_t offset, size_t count)
-{
- struct i2o_controller *c = kobj_to_i2o_device(kobj)->iop;
- i2o_hrt *hrt = c->hrt.virt;
-
- u32 size = (hrt->num_entries * hrt->entry_len + 2) * 4;
-
- if (offset > size)
- return 0;
-
- if (offset + count > size)
- count = size - offset;
-
- memcpy(buf, (u8 *) hrt + offset, count);
-
- return count;
-};
-
-/**
- * i2o_config_read_lct - Returns the LCT of the controller
- * @kob: kernel object handle
- * @buf: buffer into which the LCT should be copied
- * @off: file offset
- * @count: number of bytes to read
- *
- * Put @count bytes starting at @off into @buf from the LCT of the I2O
- * controller corresponding to @kobj.
- *
- * Returns number of bytes copied into buffer.
- */
-static ssize_t i2o_config_read_lct(struct kobject *kobj, char *buf,
- loff_t offset, size_t count)
-{
- struct i2o_controller *c = kobj_to_i2o_device(kobj)->iop;
- u32 size = c->lct->table_size * 4;
-
- if (offset > size)
- return 0;
-
- if (offset + count > size)
- count = size - offset;
-
- memcpy(buf, (u8 *) c->lct + offset, count);
-
- return count;
-};
-
-#define I2O_CONFIG_SW_ATTR(_name,_mode,_type,_swid) \
-static ssize_t i2o_config_##_name##_read(struct file *file, char __user *buf, size_t count, loff_t * offset) { \
- return i2o_config_sw_read(file, buf, count, offset, _type, _swid); \
-};\
-\
-static ssize_t i2o_config_##_name##_write(struct file *file, const char __user *buf, size_t count, loff_t * offset) { \
- return i2o_config_sw_write(file, buf, count, offset, _type, _swid); \
-}; \
-\
-static struct fops_attribute i2o_config_attr_##_name = { \
- .bin = { .attr = { .name = __stringify(_name), .mode = _mode, \
- .owner = THIS_MODULE }, \
- .size = 0, }, \
- .fops = { .write = i2o_config_##_name##_write, \
- .read = i2o_config_##_name##_read} \
-};
-
-#ifdef CONFIG_I2O_EXT_ADAPTEC
-
-/**
- * i2o_config_dpt_reagion - Converts type and id to flash region
- * @swtype: type of software module reading
- * @swid: id of software which should be read
- *
- * Converts type and id from I2O spec to the matching region for DPT /
- * Adaptec controllers.
- *
- * Returns region which match type and id or -1 on error.
- */
-static u32 i2o_config_dpt_region(u8 swtype, u8 swid)
-{
- switch (swtype) {
- case I2O_SOFTWARE_MODULE_IRTOS:
- /*
- * content: operation firmware
- * region size:
- * 0xbc000 for 2554, 3754, 2564, 3757
- * 0x170000 for 2865
- * 0x17c000 for 3966
- */
- if (!swid)
- return 0;
-
- break;
-
- case I2O_SOFTWARE_MODULE_IOP_PRIVATE:
- /*
- * content: BIOS and SMOR
- * BIOS size: first 0x8000 bytes
- * region size:
- * 0x40000 for 2554, 3754, 2564, 3757
- * 0x80000 for 2865, 3966
- */
- if (!swid)
- return 1;
-
- break;
-
- case I2O_SOFTWARE_MODULE_IOP_CONFIG:
- switch (swid) {
- case 0:
- /*
- * content: NVRAM defaults
- * region size: 0x2000 bytes
- */
- return 2;
- case 1:
- /*
- * content: serial number
- * region size: 0x2000 bytes
- */
- return 3;
- }
- break;
- }
-
- return -1;
-};
-
-#endif
-
-/**
- * i2o_config_sw_read - Read a software module from controller
- * @file: file pointer
- * @buf: buffer into which the data should be copied
- * @count: number of bytes to read
- * @off: file offset
- * @swtype: type of software module reading
- * @swid: id of software which should be read
- *
- * Transfers @count bytes at offset @offset from IOP into buffer using
- * type @swtype and id @swid as described in I2O spec.
- *
- * Returns number of bytes copied into buffer or error code on failure.
- */
-static ssize_t i2o_config_sw_read(struct file *file, char __user * buf,
- size_t count, loff_t * offset, u8 swtype,
- u32 swid)
-{
- struct sysfs_dirent *sd = file->f_dentry->d_parent->d_fsdata;
- struct kobject *kobj = sd->s_element;
- struct i2o_controller *c = kobj_to_i2o_device(kobj)->iop;
- u32 m, function = I2O_CMD_SW_UPLOAD;
- struct i2o_dma buffer;
- struct i2o_message __iomem *msg;
- u32 __iomem *mptr;
- int rc, status;
-
- m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET);
- if (m == I2O_QUEUE_EMPTY)
- return -EBUSY;
-
- mptr = &msg->body[3];
-
- if ((rc = i2o_dma_alloc(&c->pdev->dev, &buffer, count, GFP_KERNEL))) {
- i2o_msg_nop(c, m);
- return rc;
- }
-#ifdef CONFIG_I2O_EXT_ADAPTEC
- if (c->adaptec) {
- mptr = &msg->body[4];
- function = I2O_CMD_PRIVATE;
-
- writel(TEN_WORD_MSG_SIZE | SGL_OFFSET_8, &msg->u.head[0]);
-
- writel(I2O_VENDOR_DPT << 16 | I2O_DPT_FLASH_READ,
- &msg->body[0]);
- writel(i2o_config_dpt_region(swtype, swid), &msg->body[1]);
- writel(*offset, &msg->body[2]);
- writel(count, &msg->body[3]);
- } else
-#endif
- writel(NINE_WORD_MSG_SIZE | SGL_OFFSET_7, &msg->u.head[0]);
-
- writel(0xD0000000 | count, mptr++);
- writel(buffer.phys, mptr);
-
- writel(function << 24 | HOST_TID << 12 | ADAPTER_TID, &msg->u.head[1]);
- writel(i2o_config_driver.context, &msg->u.head[2]);
- writel(0, &msg->u.head[3]);
-
-#ifdef CONFIG_I2O_EXT_ADAPTEC
- if (!c->adaptec)
-#endif
- {
- writel((u32) swtype << 16 | (u32) 1 << 8, &msg->body[0]);
- writel(0, &msg->body[1]);
- writel(swid, &msg->body[2]);
- }
-
- status = i2o_msg_post_wait_mem(c, m, 60, &buffer);
-
- if (status == I2O_POST_WAIT_OK) {
- if (!(rc = copy_to_user(buf, buffer.virt, count))) {
- rc = count;
- *offset += count;
- }
- } else
- rc = -EIO;
-
- if (status != -ETIMEDOUT)
- i2o_dma_free(&c->pdev->dev, &buffer);
-
- return rc;
-};
-
-/**
- * i2o_config_sw_write - Write a software module to controller
- * @file: file pointer
- * @buf: buffer into which the data should be copied
- * @count: number of bytes to read
- * @off: file offset
- * @swtype: type of software module writing
- * @swid: id of software which should be written
- *
- * Transfers @count bytes at offset @offset from buffer to IOP using
- * type @swtype and id @swid as described in I2O spec.
- *
- * Returns number of bytes copied from buffer or error code on failure.
- */
-static ssize_t i2o_config_sw_write(struct file *file, const char __user * buf,
- size_t count, loff_t * offset, u8 swtype,
- u32 swid)
-{
- struct sysfs_dirent *sd = file->f_dentry->d_parent->d_fsdata;
- struct kobject *kobj = sd->s_element;
- struct i2o_controller *c = kobj_to_i2o_device(kobj)->iop;
- u32 m, function = I2O_CMD_SW_DOWNLOAD;
- struct i2o_dma buffer;
- struct i2o_message __iomem *msg;
- u32 __iomem *mptr;
- int rc, status;
-
- m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET);
- if (m == I2O_QUEUE_EMPTY)
- return -EBUSY;
-
- mptr = &msg->body[3];
-
- if ((rc = i2o_dma_alloc(&c->pdev->dev, &buffer, count, GFP_KERNEL)))
- goto nop_msg;
-
- if ((rc = copy_from_user(buffer.virt, buf, count)))
- goto free_buffer;
-
-#ifdef CONFIG_I2O_EXT_ADAPTEC
- if (c->adaptec) {
- mptr = &msg->body[4];
- function = I2O_CMD_PRIVATE;
-
- writel(TEN_WORD_MSG_SIZE | SGL_OFFSET_8, &msg->u.head[0]);
-
- writel(I2O_VENDOR_DPT << 16 | I2O_DPT_FLASH_WRITE,
- &msg->body[0]);
- writel(i2o_config_dpt_region(swtype, swid), &msg->body[1]);
- writel(*offset, &msg->body[2]);
- writel(count, &msg->body[3]);
- } else
-#endif
- writel(NINE_WORD_MSG_SIZE | SGL_OFFSET_7, &msg->u.head[0]);
-
- writel(0xD4000000 | count, mptr++);
- writel(buffer.phys, mptr);
-
- writel(function << 24 | HOST_TID << 12 | ADAPTER_TID, &msg->u.head[1]);
- writel(i2o_config_driver.context, &msg->u.head[2]);
- writel(0, &msg->u.head[3]);
-
-#ifdef CONFIG_I2O_EXT_ADAPTEC
- if (!c->adaptec)
-#endif
- {
- writel((u32) swtype << 16 | (u32) 1 << 8, &msg->body[0]);
- writel(0, &msg->body[1]);
- writel(swid, &msg->body[2]);
- }
-
- status = i2o_msg_post_wait_mem(c, m, 60, &buffer);
-
- if (status != -ETIMEDOUT)
- i2o_dma_free(&c->pdev->dev, &buffer);
-
- if (status != I2O_POST_WAIT_OK)
- return -EIO;
-
- *offset += count;
-
- return count;
-
- free_buffer:
- i2o_dma_free(&c->pdev->dev, &buffer);
-
- nop_msg:
- i2o_msg_nop(c, m);
-
- return rc;
-};
-
-/* attribute for HRT in sysfs */
-static struct bin_attribute i2o_config_hrt_attr = {
- .attr = {
- .name = "hrt",
- .mode = S_IRUGO,
- .owner = THIS_MODULE},
- .size = 0,
- .read = i2o_config_read_hrt
-};
-
-/* attribute for LCT in sysfs */
-static struct bin_attribute i2o_config_lct_attr = {
- .attr = {
- .name = "lct",
- .mode = S_IRUGO,
- .owner = THIS_MODULE},
- .size = 0,
- .read = i2o_config_read_lct
-};
-
-/* IRTOS firmware access */
-I2O_CONFIG_SW_ATTR(irtos, S_IWRSR, I2O_SOFTWARE_MODULE_IRTOS, 0);
-
-#ifdef CONFIG_I2O_EXT_ADAPTEC
-
-/*
- * attribute for BIOS / SMOR, nvram and serial number access on DPT / Adaptec
- * controllers
- */
-I2O_CONFIG_SW_ATTR(bios, S_IWRSR, I2O_SOFTWARE_MODULE_IOP_PRIVATE, 0);
-I2O_CONFIG_SW_ATTR(nvram, S_IWRSR, I2O_SOFTWARE_MODULE_IOP_CONFIG, 0);
-I2O_CONFIG_SW_ATTR(serial, S_IWRSR, I2O_SOFTWARE_MODULE_IOP_CONFIG, 1);
-
-#endif
-
-/**
- * i2o_config_notify_controller_add - Notify of added controller
- * @c: the controller which was added
- *
- * If a I2O controller is added, we catch the notification to add sysfs
- * entries.
- */
-static void i2o_config_notify_controller_add(struct i2o_controller *c)
-{
- struct kobject *kobj = &c->exec->device.kobj;
-
- sysfs_create_bin_file(kobj, &i2o_config_hrt_attr);
- sysfs_create_bin_file(kobj, &i2o_config_lct_attr);
-
- sysfs_create_fops_file(kobj, &i2o_config_attr_irtos);
-#ifdef CONFIG_I2O_EXT_ADAPTEC
- if (c->adaptec) {
- sysfs_create_fops_file(kobj, &i2o_config_attr_bios);
- sysfs_create_fops_file(kobj, &i2o_config_attr_nvram);
- sysfs_create_fops_file(kobj, &i2o_config_attr_serial);
- }
-#endif
-};
-
-/**
- * i2o_config_notify_controller_remove - Notify of removed controller
- * @c: the controller which was removed
- *
- * If a I2O controller is removed, we catch the notification to remove the
- * sysfs entries.
- */
-static void i2o_config_notify_controller_remove(struct i2o_controller *c)
-{
- struct kobject *kobj = &c->exec->device.kobj;
-
-#ifdef CONFIG_I2O_EXT_ADAPTEC
- if (c->adaptec) {
- sysfs_remove_fops_file(kobj, &i2o_config_attr_serial);
- sysfs_remove_fops_file(kobj, &i2o_config_attr_nvram);
- sysfs_remove_fops_file(kobj, &i2o_config_attr_bios);
- }
-#endif
- sysfs_remove_fops_file(kobj, &i2o_config_attr_irtos);
-
- sysfs_remove_bin_file(kobj, &i2o_config_lct_attr);
- sysfs_remove_bin_file(kobj, &i2o_config_hrt_attr);
-};
-
/* Config OSM driver struct */
static struct i2o_driver i2o_config_driver = {
.name = OSM_NAME,
- .notify_controller_add = i2o_config_notify_controller_add,
- .notify_controller_remove = i2o_config_notify_controller_remove
};
#ifdef CONFIG_I2O_CONFIG_OLD_IOCTL
#define TX_NUM_FIFO 4
#define TX_BUF_SIZE 32
+#define SCC_WAIT_CLOSING 100
+
struct uart_cpm_port {
struct uart_port port;
- u16 rx_nrfifos;
+ u16 rx_nrfifos;
u16 rx_fifosize;
- u16 tx_nrfifos;
+ u16 tx_nrfifos;
u16 tx_fifosize;
- smc_t *smcp;
+ smc_t *smcp;
smc_uart_t *smcup;
scc_t *sccp;
scc_uart_t *sccup;
int bits;
/* Keep track of 'odd' SMC2 wirings */
int is_portb;
+ /* wait on close if needed */
+ int wait_closing;
};
extern int cpm_uart_port_map[UART_NR];
*
* Maintainer: Kumar Gala (kumar.gala@freescale.com) (CPM2)
* Pantelis Antoniou (panto@intracom.gr) (CPM1)
- *
+ *
* Copyright (C) 2004 Freescale Semiconductor, Inc.
* (C) 2004 Intracom, S.A.
+ * (C) 2005 MontaVista Software, Inc. by Vitaly Bordug <vbordug@ru.mvista.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
/**************************************************************/
+static inline unsigned long cpu2cpm_addr(void *addr)
+{
+ if ((unsigned long)addr >= CPM_ADDR)
+ return (unsigned long)addr;
+ return virt_to_bus(addr);
+}
+
+static inline void *cpm2cpu_addr(unsigned long addr)
+{
+ if (addr >= CPM_ADDR)
+ return (void *)addr;
+ return bus_to_virt(addr);
+}
+
/*
- * Check, if transmit buffers are processed
+ * Check, if transmit buffers are processed
*/
static unsigned int cpm_uart_tx_empty(struct uart_port *port)
{
}
if (cpm_uart_tx_pump(port) != 0) {
- if (IS_SMC(pinfo))
+ if (IS_SMC(pinfo)) {
smcp->smc_smcm |= SMCM_TX;
- else
+ smcp->smc_smcmr |= SMCMR_TEN;
+ } else {
sccp->scc_sccm |= UART_SCCM_TX;
+ pinfo->sccp->scc_gsmrl |= SCC_GSMRL_ENT;
+ }
}
}
/*
- * Stop receiver
+ * Stop receiver
*/
static void cpm_uart_stop_rx(struct uart_port *port)
{
}
/*
- * Generate a break.
+ * Generate a break.
*/
static void cpm_uart_break_ctl(struct uart_port *port, int break_state)
{
/* get number of characters, and check spce in flip-buffer */
i = bdp->cbd_datlen;
- /* If we have not enough room in tty flip buffer, then we try
+ /* If we have not enough room in tty flip buffer, then we try
* later, which will be the next rx-interrupt or a timeout
*/
if ((tty->flip.count + i) >= TTY_FLIPBUF_SIZE) {
}
/* get pointer */
- cp = (unsigned char *)bus_to_virt(bdp->cbd_bufaddr);
+ cp = cpm2cpu_addr(bdp->cbd_bufaddr);
/* loop through the buffer */
while (i-- > 0) {
} /* End while (i--) */
/* This BD is ready to be used again. Clear status. get next */
- bdp->cbd_sc &= ~(BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV);
+ bdp->cbd_sc &= ~(BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV | BD_SC_ID);
bdp->cbd_sc |= BD_SC_EMPTY;
if (bdp->cbd_sc & BD_SC_WRAP)
bdp = pinfo->rx_bd_base;
else
bdp++;
+
} /* End for (;;) */
/* Write back buffer pointer */
if (IS_SMC(pinfo)) {
events = smcp->smc_smce;
+ smcp->smc_smce = events;
if (events & SMCM_BRKE)
uart_handle_break(port);
if (events & SMCM_RX)
cpm_uart_int_rx(port, regs);
if (events & SMCM_TX)
cpm_uart_int_tx(port, regs);
- smcp->smc_smce = events;
} else {
events = sccp->scc_scce;
+ sccp->scc_scce = events;
if (events & UART_SCCM_BRKE)
uart_handle_break(port);
if (events & UART_SCCM_RX)
cpm_uart_int_rx(port, regs);
if (events & UART_SCCM_TX)
cpm_uart_int_tx(port, regs);
- sccp->scc_scce = events;
}
return (events) ? IRQ_HANDLED : IRQ_NONE;
}
{
int retval;
struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
+ int line = pinfo - cpm_uart_ports;
pr_debug("CPM uart[%d]:startup\n", port->line);
pinfo->sccp->scc_sccm |= UART_SCCM_RX;
}
+ if (!(pinfo->flags & FLAG_CONSOLE))
+ cpm_line_cr_cmd(line,CPM_CR_INIT_TRX);
return 0;
}
+inline void cpm_uart_wait_until_send(struct uart_cpm_port *pinfo)
+{
+ unsigned long target_jiffies = jiffies + pinfo->wait_closing;
+
+ while (!time_after(jiffies, target_jiffies))
+ schedule();
+}
+
/*
* Shutdown the uart
*/
/* If the port is not the console, disable Rx and Tx. */
if (!(pinfo->flags & FLAG_CONSOLE)) {
+ /* Wait for all the BDs marked sent */
+ while(!cpm_uart_tx_empty(port))
+ schedule_timeout(2);
+ if(pinfo->wait_closing)
+ cpm_uart_wait_until_send(pinfo);
+
/* Stop uarts */
if (IS_SMC(pinfo)) {
volatile smc_t *smcp = pinfo->smcp;
*/
if ((termios->c_cflag & CREAD) == 0)
port->read_status_mask &= ~BD_SC_EMPTY;
-
+
spin_lock_irqsave(&port->lock, flags);
/* Start bit has not been added (so don't, because we would just
/* Pick next descriptor and fill from buffer */
bdp = pinfo->tx_cur;
- p = bus_to_virt(bdp->cbd_bufaddr);
+ p = cpm2cpu_addr(bdp->cbd_bufaddr);
+
*p++ = xmit->buf[xmit->tail];
bdp->cbd_datlen = 1;
bdp->cbd_sc |= BD_SC_READY;
while (!(bdp->cbd_sc & BD_SC_READY) && (xmit->tail != xmit->head)) {
count = 0;
- p = bus_to_virt(bdp->cbd_bufaddr);
+ p = cpm2cpu_addr(bdp->cbd_bufaddr);
while (count < pinfo->tx_fifosize) {
*p++ = xmit->buf[xmit->tail];
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
}
bdp->cbd_datlen = count;
bdp->cbd_sc |= BD_SC_READY;
+ __asm__("eieio");
/* Get next BD. */
if (bdp->cbd_sc & BD_SC_WRAP)
bdp = pinfo->tx_bd_base;
mem_addr = pinfo->mem_addr;
bdp = pinfo->rx_cur = pinfo->rx_bd_base;
for (i = 0; i < (pinfo->rx_nrfifos - 1); i++, bdp++) {
- bdp->cbd_bufaddr = virt_to_bus(mem_addr);
+ bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr);
bdp->cbd_sc = BD_SC_EMPTY | BD_SC_INTRPT;
mem_addr += pinfo->rx_fifosize;
}
-
- bdp->cbd_bufaddr = virt_to_bus(mem_addr);
+
+ bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr);
bdp->cbd_sc = BD_SC_WRAP | BD_SC_EMPTY | BD_SC_INTRPT;
/* Set the physical address of the host memory
mem_addr = pinfo->mem_addr + L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize);
bdp = pinfo->tx_cur = pinfo->tx_bd_base;
for (i = 0; i < (pinfo->tx_nrfifos - 1); i++, bdp++) {
- bdp->cbd_bufaddr = virt_to_bus(mem_addr);
+ bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr);
bdp->cbd_sc = BD_SC_INTRPT;
mem_addr += pinfo->tx_fifosize;
}
-
- bdp->cbd_bufaddr = virt_to_bus(mem_addr);
+
+ bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr);
bdp->cbd_sc = BD_SC_WRAP | BD_SC_INTRPT;
}
/* Using idle charater time requires some additional tuning. */
up->smc_mrblr = pinfo->rx_fifosize;
up->smc_maxidl = pinfo->rx_fifosize;
+ up->smc_brklen = 0;
+ up->smc_brkec = 0;
up->smc_brkcr = 1;
cpm_line_cr_cmd(line, CPM_CR_INIT_TRX);
/*
* Setup any port IO, connect any baud rate generators,
* etc. This is expected to be handled by board
- * dependant code
+ * dependant code
*/
if (pinfo->set_lineif)
pinfo->set_lineif(pinfo);
return ret;
cpm_uart_initbd(pinfo);
+ if (IS_SMC(pinfo))
+ cpm_uart_init_smc(pinfo);
+ else
+ cpm_uart_init_scc(pinfo);
return 0;
}
.flags = FLAG_SMC,
.tx_nrfifos = TX_NUM_FIFO,
.tx_fifosize = TX_BUF_SIZE,
- .rx_nrfifos = RX_NUM_FIFO,
+ .rx_nrfifos = RX_NUM_FIFO,
.rx_fifosize = RX_BUF_SIZE,
.set_lineif = smc1_lineif,
},
.flags = FLAG_SMC,
.tx_nrfifos = TX_NUM_FIFO,
.tx_fifosize = TX_BUF_SIZE,
- .rx_nrfifos = RX_NUM_FIFO,
+ .rx_nrfifos = RX_NUM_FIFO,
.rx_fifosize = RX_BUF_SIZE,
.set_lineif = smc2_lineif,
#ifdef CONFIG_SERIAL_CPM_ALT_SMC2
},
.tx_nrfifos = TX_NUM_FIFO,
.tx_fifosize = TX_BUF_SIZE,
- .rx_nrfifos = RX_NUM_FIFO,
+ .rx_nrfifos = RX_NUM_FIFO,
.rx_fifosize = RX_BUF_SIZE,
.set_lineif = scc1_lineif,
+ .wait_closing = SCC_WAIT_CLOSING,
},
[UART_SCC2] = {
.port = {
},
.tx_nrfifos = TX_NUM_FIFO,
.tx_fifosize = TX_BUF_SIZE,
- .rx_nrfifos = RX_NUM_FIFO,
+ .rx_nrfifos = RX_NUM_FIFO,
.rx_fifosize = RX_BUF_SIZE,
.set_lineif = scc2_lineif,
+ .wait_closing = SCC_WAIT_CLOSING,
},
[UART_SCC3] = {
.port = {
},
.tx_nrfifos = TX_NUM_FIFO,
.tx_fifosize = TX_BUF_SIZE,
- .rx_nrfifos = RX_NUM_FIFO,
+ .rx_nrfifos = RX_NUM_FIFO,
.rx_fifosize = RX_BUF_SIZE,
.set_lineif = scc3_lineif,
+ .wait_closing = SCC_WAIT_CLOSING,
},
[UART_SCC4] = {
.port = {
},
.tx_nrfifos = TX_NUM_FIFO,
.tx_fifosize = TX_BUF_SIZE,
- .rx_nrfifos = RX_NUM_FIFO,
+ .rx_nrfifos = RX_NUM_FIFO,
.rx_fifosize = RX_BUF_SIZE,
.set_lineif = scc4_lineif,
+ .wait_closing = SCC_WAIT_CLOSING,
},
};
* If the buffer address is in the CPM DPRAM, don't
* convert it.
*/
- if ((uint) (bdp->cbd_bufaddr) > (uint) CPM_ADDR)
- cp = (unsigned char *) (bdp->cbd_bufaddr);
- else
- cp = bus_to_virt(bdp->cbd_bufaddr);
-
+ cp = cpm2cpu_addr(bdp->cbd_bufaddr);
+
*cp = *s;
bdp->cbd_datlen = 1;
while ((bdp->cbd_sc & BD_SC_READY) != 0)
;
- if ((uint) (bdp->cbd_bufaddr) > (uint) CPM_ADDR)
- cp = (unsigned char *) (bdp->cbd_bufaddr);
- else
- cp = bus_to_virt(bdp->cbd_bufaddr);
+ cp = cpm2cpu_addr(bdp->cbd_bufaddr);
*cp = 13;
bdp->cbd_datlen = 1;
port =
(struct uart_port *)&cpm_uart_ports[cpm_uart_port_map[co->index]];
pinfo = (struct uart_cpm_port *)port;
-
+
pinfo->flags |= FLAG_CONSOLE;
if (options) {
/*
* Setup any port IO, connect any baud rate generators,
* etc. This is expected to be handled by board
- * dependant code
+ * dependant code
*/
if (pinfo->set_lineif)
pinfo->set_lineif(pinfo);
return 0;
}
-extern struct uart_driver cpm_reg;
+static struct uart_driver cpm_reg;
static struct console cpm_scc_uart_console = {
- .name "ttyCPM",
- .write cpm_uart_console_write,
- .device uart_console_device,
- .setup cpm_uart_console_setup,
- .flags CON_PRINTBUFFER,
- .index -1,
+ .name = "ttyCPM",
+ .write = cpm_uart_console_write,
+ .device = uart_console_device,
+ .setup = cpm_uart_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
.data = &cpm_reg,
};
*
* Maintainer: Kumar Gala (kumar.gala@freescale.com) (CPM2)
* Pantelis Antoniou (panto@intracom.gr) (CPM1)
- *
+ *
* Copyright (C) 2004 Freescale Semiconductor, Inc.
* (C) 2004 Intracom, S.A.
*
void smc1_lineif(struct uart_cpm_port *pinfo)
{
volatile cpm8xx_t *cp = cpmp;
+
+ (void)cp; /* fix warning */
+#if defined (CONFIG_MPC885ADS)
+ /* Enable SMC1 transceivers */
+ {
+ cp->cp_pepar |= 0x000000c0;
+ cp->cp_pedir &= ~0x000000c0;
+ cp->cp_peso &= ~0x00000040;
+ cp->cp_peso |= 0x00000080;
+ }
+#elif defined (CONFIG_MPC86XADS)
unsigned int iobits = 0x000000c0;
if (!pinfo->is_portb) {
((immap_t *)IMAP_ADDR)->im_ioport.iop_padir &= ~iobits;
((immap_t *)IMAP_ADDR)->im_ioport.iop_paodr &= ~iobits;
}
-
-#ifdef CONFIG_MPC885ADS
- /* Enable SMC1 transceivers */
- {
- volatile uint __iomem *bcsr1 = ioremap(BCSR1, 4);
- uint tmp;
-
- tmp = in_be32(bcsr1);
- tmp &= ~BCSR1_RS232EN_1;
- out_be32(bcsr1, tmp);
- iounmap(bcsr1);
- }
#endif
-
pinfo->brg = 1;
}
void smc2_lineif(struct uart_cpm_port *pinfo)
{
-#ifdef CONFIG_MPC885ADS
volatile cpm8xx_t *cp = cpmp;
- volatile uint __iomem *bcsr1;
- uint tmp;
+ (void)cp; /* fix warning */
+#if defined (CONFIG_MPC885ADS)
cp->cp_pepar |= 0x00000c00;
cp->cp_pedir &= ~0x00000c00;
cp->cp_peso &= ~0x00000400;
cp->cp_peso |= 0x00000800;
+#elif defined (CONFIG_MPC86XADS)
+ unsigned int iobits = 0x00000c00;
+
+ if (!pinfo->is_portb) {
+ cp->cp_pbpar |= iobits;
+ cp->cp_pbdir &= ~iobits;
+ cp->cp_pbodr &= ~iobits;
+ } else {
+ ((immap_t *)IMAP_ADDR)->im_ioport.iop_papar |= iobits;
+ ((immap_t *)IMAP_ADDR)->im_ioport.iop_padir &= ~iobits;
+ ((immap_t *)IMAP_ADDR)->im_ioport.iop_paodr &= ~iobits;
+ }
- /* Enable SMC2 transceivers */
- bcsr1 = ioremap(BCSR1, 4);
- tmp = in_be32(bcsr1);
- tmp &= ~BCSR1_RS232EN_2;
- out_be32(bcsr1, tmp);
- iounmap(bcsr1);
#endif
pinfo->brg = 2;
}
/*
- * Allocate DP-Ram and memory buffers. We need to allocate a transmit and
+ * Allocate DP-Ram and memory buffers. We need to allocate a transmit and
* receive buffer descriptors from dual port ram, and a character
* buffer area from host mem. If we are allocating for the console we need
* to do it from bootmem
memsz = L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize) +
L1_CACHE_ALIGN(pinfo->tx_nrfifos * pinfo->tx_fifosize);
if (is_con) {
+ /* was hostalloc but changed cause it blows away the */
+ /* large tlb mapping when pinning the kernel area */
mem_addr = (u8 *) cpm_dpram_addr(cpm_dpalloc(memsz, 8));
dma_addr = 0;
} else
* to continue to serve a useful existence. Next time it's released,
* we will get notified again, if it still has 'notify_on_release' set.
*
- * Note final arg to call_usermodehelper() is 0 - that means
- * don't wait. Since we are holding the global cpuset_sem here,
- * and we are asking another thread (started from keventd) to rmdir a
- * cpuset, we can't wait - or we'd deadlock with the removing thread
- * on cpuset_sem.
+ * The final arg to call_usermodehelper() is 0, which means don't
+ * wait. The separate /sbin/cpuset_release_agent task is forked by
+ * call_usermodehelper(), then control in this thread returns here,
+ * without waiting for the release agent task. We don't bother to
+ * wait because the caller of this routine has no use for the exit
+ * status of the /sbin/cpuset_release_agent task, so no sense holding
+ * our caller up for that.
+ *
+ * The simple act of forking that task might require more memory,
+ * which might need cpuset_sem. So this routine must be called while
+ * cpuset_sem is not held, to avoid a possible deadlock. See also
+ * comments for check_for_release(), below.
*/
-static int cpuset_release_agent(char *cpuset_str)
+static void cpuset_release_agent(const char *pathbuf)
{
char *argv[3], *envp[3];
int i;
+ if (!pathbuf)
+ return;
+
i = 0;
argv[i++] = "/sbin/cpuset_release_agent";
- argv[i++] = cpuset_str;
+ argv[i++] = (char *)pathbuf;
argv[i] = NULL;
i = 0;
envp[i++] = "PATH=/sbin:/bin:/usr/sbin:/usr/bin";
envp[i] = NULL;
- return call_usermodehelper(argv[0], argv, envp, 0);
+ call_usermodehelper(argv[0], argv, envp, 0);
+ kfree(pathbuf);
}
/*
* Either cs->count of using tasks transitioned to zero, or the
* cs->children list of child cpusets just became empty. If this
* cs is notify_on_release() and now both the user count is zero and
- * the list of children is empty, send notice to user land.
+ * the list of children is empty, prepare cpuset path in a kmalloc'd
+ * buffer, to be returned via ppathbuf, so that the caller can invoke
+ * cpuset_release_agent() with it later on, once cpuset_sem is dropped.
+ * Call here with cpuset_sem held.
+ *
+ * This check_for_release() routine is responsible for kmalloc'ing
+ * pathbuf. The above cpuset_release_agent() is responsible for
+ * kfree'ing pathbuf. The caller of these routines is responsible
+ * for providing a pathbuf pointer, initialized to NULL, then
+ * calling check_for_release() with cpuset_sem held and the address
+ * of the pathbuf pointer, then dropping cpuset_sem, then calling
+ * cpuset_release_agent() with pathbuf, as set by check_for_release().
*/
-static void check_for_release(struct cpuset *cs)
+static void check_for_release(struct cpuset *cs, char **ppathbuf)
{
if (notify_on_release(cs) && atomic_read(&cs->count) == 0 &&
list_empty(&cs->children)) {
if (!buf)
return;
if (cpuset_path(cs, buf, PAGE_SIZE) < 0)
- goto out;
- cpuset_release_agent(buf);
-out:
- kfree(buf);
+ kfree(buf);
+ else
+ *ppathbuf = buf;
}
}
return 0;
}
-static int attach_task(struct cpuset *cs, char *buf)
+static int attach_task(struct cpuset *cs, char *pidbuf, char **ppathbuf)
{
pid_t pid;
struct task_struct *tsk;
struct cpuset *oldcs;
cpumask_t cpus;
- if (sscanf(buf, "%d", &pid) != 1)
+ if (sscanf(pidbuf, "%d", &pid) != 1)
return -EIO;
if (cpus_empty(cs->cpus_allowed) || nodes_empty(cs->mems_allowed))
return -ENOSPC;
put_task_struct(tsk);
if (atomic_dec_and_test(&oldcs->count))
- check_for_release(oldcs);
+ check_for_release(oldcs, ppathbuf);
return 0;
}
struct cftype *cft = __d_cft(file->f_dentry);
cpuset_filetype_t type = cft->private;
char *buffer;
+ char *pathbuf = NULL;
int retval = 0;
/* Crude upper limit on largest legitimate cpulist user might write. */
retval = update_flag(CS_NOTIFY_ON_RELEASE, cs, buffer);
break;
case FILE_TASKLIST:
- retval = attach_task(cs, buffer);
+ retval = attach_task(cs, buffer, &pathbuf);
break;
default:
retval = -EINVAL;
retval = nbytes;
out2:
up(&cpuset_sem);
+ cpuset_release_agent(pathbuf);
out1:
kfree(buffer);
return retval;
struct cpuset *cs = dentry->d_fsdata;
struct dentry *d;
struct cpuset *parent;
+ char *pathbuf = NULL;
/* the vfs holds both inode->i_sem already */
update_cpu_domains(cs);
list_del(&cs->sibling); /* delete my sibling from parent->children */
if (list_empty(&parent->children))
- check_for_release(parent);
+ check_for_release(parent, &pathbuf);
spin_lock(&cs->dentry->d_lock);
d = dget(cs->dentry);
cs->dentry = NULL;
cpuset_d_remove_dir(d);
dput(d);
up(&cpuset_sem);
+ cpuset_release_agent(pathbuf);
return 0;
}
task_unlock(tsk);
if (notify_on_release(cs)) {
+ char *pathbuf = NULL;
+
down(&cpuset_sem);
if (atomic_dec_and_test(&cs->count))
- check_for_release(cs);
+ check_for_release(cs, &pathbuf);
up(&cpuset_sem);
+ cpuset_release_agent(pathbuf);
} else {
atomic_dec(&cs->count);
}
} else
kern_msg->msg_name = NULL;
- if(kern_msg->msg_iovlen > UIO_FASTIOV) {
- kern_iov = kmalloc(kern_msg->msg_iovlen * sizeof(struct iovec),
- GFP_KERNEL);
- if(!kern_iov)
- return -ENOMEM;
- }
-
tot_len = iov_from_user_compat_to_kern(kern_iov,
(struct compat_iovec __user *)kern_msg->msg_iov,
kern_msg->msg_iovlen);
if(tot_len >= 0)
kern_msg->msg_iov = kern_iov;
- else if(kern_msg->msg_iovlen > UIO_FASTIOV)
- kfree(kern_iov);
return tot_len;
}
}
if (skb->stamp.tv_sec == 0) {
skb->stamp.tv_sec = xtime.tv_sec;
- skb->stamp.tv_usec = xtime.tv_nsec * 1000;
+ skb->stamp.tv_usec = xtime.tv_nsec / NSEC_PER_USEC;
/* Don't enable netstamp, sunrpc doesn't
need that much accuracy */
}
git.openpandora.org / pandora-kernel.git / commitdiff