}
}
+static int __devinit hpsa_send_host_reset(struct ctlr_info *h,
+ unsigned char *scsi3addr, u8 reset_type)
+{
+ struct CommandList *c;
+
+ c = cmd_alloc(h);
+ if (!c)
+ return -ENOMEM;
+ fill_cmd(c, HPSA_DEVICE_RESET_MSG, h, NULL, 0, 0,
+ RAID_CTLR_LUNID, TYPE_MSG);
+ c->Request.CDB[1] = reset_type; /* fill_cmd defaults to target reset */
+ c->waiting = NULL;
+ enqueue_cmd_and_start_io(h, c);
+ /* Don't wait for completion, the reset won't complete. Don't free
+ * the command either. This is the last command we will send before
+ * re-initializing everything, so it doesn't matter and won't leak.
+ */
+ return 0;
+}
+
static void fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h,
void *buff, size_t size, u8 page_code, unsigned char *scsi3addr,
int cmd_type)
c->Request.Type.Attribute = ATTR_SIMPLE;
c->Request.Type.Direction = XFER_NONE;
c->Request.Timeout = 0; /* Don't time out */
- c->Request.CDB[0] = 0x01; /* RESET_MSG is 0x01 */
+ memset(&c->Request.CDB[0], 0, sizeof(c->Request.CDB));
+ c->Request.CDB[0] = cmd;
c->Request.CDB[1] = 0x03; /* Reset target above */
/* If bytes 4-7 are zero, it means reset the */
/* LunID device */
return next_command(h);
}
+/* Some controllers, like p400, will give us one interrupt
+ * after a soft reset, even if we turned interrupts off.
+ * Only need to check for this in the hpsa_xxx_discard_completions
+ * functions.
+ */
+static int ignore_bogus_interrupt(struct ctlr_info *h)
+{
+ if (likely(!reset_devices))
+ return 0;
+
+ if (likely(h->interrupts_enabled))
+ return 0;
+
+ dev_info(&h->pdev->dev, "Received interrupt while interrupts disabled "
+ "(known firmware bug.) Ignoring.\n");
+
+ return 1;
+}
+
+static irqreturn_t hpsa_intx_discard_completions(int irq, void *dev_id)
+{
+ struct ctlr_info *h = dev_id;
+ unsigned long flags;
+ u32 raw_tag;
+
+ if (ignore_bogus_interrupt(h))
+ return IRQ_NONE;
+
+ if (interrupt_not_for_us(h))
+ return IRQ_NONE;
+ spin_lock_irqsave(&h->lock, flags);
+ while (interrupt_pending(h)) {
+ raw_tag = get_next_completion(h);
+ while (raw_tag != FIFO_EMPTY)
+ raw_tag = next_command(h);
+ }
+ spin_unlock_irqrestore(&h->lock, flags);
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t hpsa_msix_discard_completions(int irq, void *dev_id)
+{
+ struct ctlr_info *h = dev_id;
+ unsigned long flags;
+ u32 raw_tag;
+
+ if (ignore_bogus_interrupt(h))
+ return IRQ_NONE;
+
+ spin_lock_irqsave(&h->lock, flags);
+ raw_tag = get_next_completion(h);
+ while (raw_tag != FIFO_EMPTY)
+ raw_tag = next_command(h);
+ spin_unlock_irqrestore(&h->lock, flags);
+ return IRQ_HANDLED;
+}
+
static irqreturn_t do_hpsa_intr_intx(int irq, void *dev_id)
{
struct ctlr_info *h = dev_id;
return 0;
}
-#define hpsa_soft_reset_controller(p) hpsa_message(p, 1, 0)
#define hpsa_noop(p) hpsa_message(p, 3, 0)
static int hpsa_controller_hard_reset(struct pci_dev *pdev,
"'Bit 2 doorbell reset' is "
"supported, but not 'bit 5 doorbell reset'. "
"Firmware update is recommended.\n");
- rc = -ENODEV;
+ rc = -ENOTSUPP; /* try soft reset */
goto unmap_cfgtable;
}
}
/* Wait for board to become not ready, then ready. */
dev_info(&pdev->dev, "Waiting for board to reset.\n");
rc = hpsa_wait_for_board_state(pdev, vaddr, BOARD_NOT_READY);
- if (rc)
+ if (rc) {
dev_warn(&pdev->dev,
- "failed waiting for board to reset\n");
+ "failed waiting for board to reset."
+ " Will try soft reset.\n");
+ rc = -ENOTSUPP; /* Not expected, but try soft reset later */
+ goto unmap_cfgtable;
+ }
rc = hpsa_wait_for_board_state(pdev, vaddr, BOARD_READY);
if (rc) {
dev_warn(&pdev->dev,
- "failed waiting for board to become ready\n");
+ "failed waiting for board to become ready "
+ "after hard reset\n");
goto unmap_cfgtable;
}
if (rc < 0)
goto unmap_cfgtable;
if (rc) {
- dev_warn(&pdev->dev, "Unable to successfully reset controller,"
- " Ignoring controller.\n");
- rc = -ENODEV;
+ dev_warn(&pdev->dev, "Unable to successfully reset "
+ "controller. Will try soft reset.\n");
+ rc = -ENOTSUPP;
} else {
- dev_info(&pdev->dev, "board ready.\n");
+ dev_info(&pdev->dev, "board ready after hard reset.\n");
}
unmap_cfgtable:
* due to concerns about shared bbwc between 6402/6404 pair.
*/
if (rc == -ENOTSUPP)
- return 0; /* just try to do the kdump anyhow. */
+ return rc; /* just try to do the kdump anyhow. */
if (rc)
return -ENODEV;
return 0;
}
+static int __devinit hpsa_kdump_soft_reset(struct ctlr_info *h)
+{
+ if (hpsa_send_host_reset(h, RAID_CTLR_LUNID,
+ HPSA_RESET_TYPE_CONTROLLER)) {
+ dev_warn(&h->pdev->dev, "Resetting array controller failed.\n");
+ return -EIO;
+ }
+
+ dev_info(&h->pdev->dev, "Waiting for board to soft reset.\n");
+ if (hpsa_wait_for_board_state(h->pdev, h->vaddr, BOARD_NOT_READY)) {
+ dev_warn(&h->pdev->dev, "Soft reset had no effect.\n");
+ return -1;
+ }
+
+ dev_info(&h->pdev->dev, "Board reset, awaiting READY status.\n");
+ if (hpsa_wait_for_board_state(h->pdev, h->vaddr, BOARD_READY)) {
+ dev_warn(&h->pdev->dev, "Board failed to become ready "
+ "after soft reset.\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+static void hpsa_undo_allocations_after_kdump_soft_reset(struct ctlr_info *h)
+{
+ free_irq(h->intr[h->intr_mode], h);
+#ifdef CONFIG_PCI_MSI
+ if (h->msix_vector)
+ pci_disable_msix(h->pdev);
+ else if (h->msi_vector)
+ pci_disable_msi(h->pdev);
+#endif /* CONFIG_PCI_MSI */
+ hpsa_free_sg_chain_blocks(h);
+ hpsa_free_cmd_pool(h);
+ kfree(h->blockFetchTable);
+ pci_free_consistent(h->pdev, h->reply_pool_size,
+ h->reply_pool, h->reply_pool_dhandle);
+ if (h->vaddr)
+ iounmap(h->vaddr);
+ if (h->transtable)
+ iounmap(h->transtable);
+ if (h->cfgtable)
+ iounmap(h->cfgtable);
+ pci_release_regions(h->pdev);
+ kfree(h);
+}
+
static int __devinit hpsa_init_one(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
int dac, rc;
struct ctlr_info *h;
+ int try_soft_reset = 0;
+ unsigned long flags;
if (number_of_controllers == 0)
printk(KERN_INFO DRIVER_NAME "\n");
rc = hpsa_init_reset_devices(pdev);
- if (rc)
- return rc;
+ if (rc) {
+ if (rc != -ENOTSUPP)
+ return rc;
+ /* If the reset fails in a particular way (it has no way to do
+ * a proper hard reset, so returns -ENOTSUPP) we can try to do
+ * a soft reset once we get the controller configured up to the
+ * point that it can accept a command.
+ */
+ try_soft_reset = 1;
+ rc = 0;
+ }
+
+reinit_after_soft_reset:
/* Command structures must be aligned on a 32-byte boundary because
* the 5 lower bits of the address are used by the hardware. and by
h->ndevices = 0;
h->scsi_host = NULL;
spin_lock_init(&h->devlock);
+ hpsa_put_ctlr_into_performant_mode(h);
+
+ /* At this point, the controller is ready to take commands.
+ * Now, if reset_devices and the hard reset didn't work, try
+ * the soft reset and see if that works.
+ */
+ if (try_soft_reset) {
+
+ /* This is kind of gross. We may or may not get a completion
+ * from the soft reset command, and if we do, then the value
+ * from the fifo may or may not be valid. So, we wait 10 secs
+ * after the reset throwing away any completions we get during
+ * that time. Unregister the interrupt handler and register
+ * fake ones to scoop up any residual completions.
+ */
+ spin_lock_irqsave(&h->lock, flags);
+ h->access.set_intr_mask(h, HPSA_INTR_OFF);
+ spin_unlock_irqrestore(&h->lock, flags);
+ free_irq(h->intr[h->intr_mode], h);
+ rc = hpsa_request_irq(h, hpsa_msix_discard_completions,
+ hpsa_intx_discard_completions);
+ if (rc) {
+ dev_warn(&h->pdev->dev, "Failed to request_irq after "
+ "soft reset.\n");
+ goto clean4;
+ }
+
+ rc = hpsa_kdump_soft_reset(h);
+ if (rc)
+ /* Neither hard nor soft reset worked, we're hosed. */
+ goto clean4;
+
+ dev_info(&h->pdev->dev, "Board READY.\n");
+ dev_info(&h->pdev->dev,
+ "Waiting for stale completions to drain.\n");
+ h->access.set_intr_mask(h, HPSA_INTR_ON);
+ msleep(10000);
+ h->access.set_intr_mask(h, HPSA_INTR_OFF);
+
+ rc = controller_reset_failed(h->cfgtable);
+ if (rc)
+ dev_info(&h->pdev->dev,
+ "Soft reset appears to have failed.\n");
+
+ /* since the controller's reset, we have to go back and re-init
+ * everything. Easiest to just forget what we've done and do it
+ * all over again.
+ */
+ hpsa_undo_allocations_after_kdump_soft_reset(h);
+ try_soft_reset = 0;
+ if (rc)
+ /* don't go to clean4, we already unallocated */
+ return -ENODEV;
+
+ goto reinit_after_soft_reset;
+ }
/* Turn the interrupts on so we can service requests */
h->access.set_intr_mask(h, HPSA_INTR_ON);
- hpsa_put_ctlr_into_performant_mode(h);
hpsa_hba_inquiry(h);
hpsa_register_scsi(h); /* hook ourselves into SCSI subsystem */
h->busy_initializing = 0;
git.openpandora.org / pandora-kernel.git / commitdiff