jme: Move the JME driver

Move the JME driver into drivers/net/ethernet/ and make the
necessary Kconfig and Makefile changes.

CC: Guo-Fu Tseng <cooldavid@cooldavid.org>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

diff --git a/MAINTAINERS b/MAINTAINERS
index 622f4fc..37cbe14 100644 (file)
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3591,7 +3591,7 @@ JME NETWORK DRIVER
 M:     Guo-Fu Tseng <cooldavid@cooldavid.org>
 L:     netdev@vger.kernel.org
 S:     Maintained
-F:     drivers/net/jme.*
+F:     drivers/net/ethernet/jme.*
 
 JOURNALLING FLASH FILE SYSTEM V2 (JFFS2)
 M:     David Woodhouse <dwmw2@infradead.org>

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index b896621..996bae0 100644 (file)
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -547,18 +547,6 @@ config XILINX_LL_TEMAC
          This driver supports the Xilinx 10/100/1000 LocalLink TEMAC
          core used in Xilinx Spartan and Virtex FPGAs
 
-config JME
-       tristate "JMicron(R) PCI-Express Gigabit Ethernet support"
-       depends on PCI
-       select CRC32
-       select MII
-       ---help---
-         This driver supports the PCI-Express gigabit ethernet adapters
-         based on JMicron JMC250 chipset.
-
-         To compile this driver as a module, choose M here. The module
-         will be called jme.
-
 endif # NETDEV_1000
 
 #

diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 648fa5c..271fc52 100644 (file)
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -8,7 +8,6 @@ obj-$(CONFIG_PHYLIB) += phy/
 obj-$(CONFIG_IP1000) += ipg.o
 obj-$(CONFIG_CAN) += can/
 obj-$(CONFIG_BONDING) += bonding/
-obj-$(CONFIG_JME) += jme.o
 obj-$(CONFIG_VMXNET3) += vmxnet3/
 
 #

diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 70c60ef..c29c145 100644 (file)
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -31,6 +31,19 @@ source "drivers/net/ethernet/ibm/Kconfig"
 source "drivers/net/ethernet/intel/Kconfig"
 source "drivers/net/ethernet/i825xx/Kconfig"
 source "drivers/net/ethernet/xscale/Kconfig"
+
+config JME
+       tristate "JMicron(R) PCI-Express Gigabit Ethernet support"
+       depends on PCI
+       select CRC32
+       select MII
+       ---help---
+         This driver supports the PCI-Express gigabit ethernet adapters
+         based on JMicron JMC250 chipset.
+
+         To compile this driver as a module, choose M here. The module
+         will be called jme.
+
 source "drivers/net/ethernet/marvell/Kconfig"
 source "drivers/net/ethernet/mellanox/Kconfig"
 source "drivers/net/ethernet/micrel/Kconfig"

diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 929ee29..8495c50 100644 (file)
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -23,6 +23,7 @@ obj-$(CONFIG_NET_VENDOR_IBM) += ibm/
 obj-$(CONFIG_NET_VENDOR_INTEL) += intel/
 obj-$(CONFIG_NET_VENDOR_I825XX) += i825xx/
 obj-$(CONFIG_NET_VENDOR_XSCALE) += xscale/
+obj-$(CONFIG_JME) += jme.o
 obj-$(CONFIG_NET_VENDOR_MARVELL) += marvell/
 obj-$(CONFIG_NET_VENDOR_MELLANOX) += mellanox/
 obj-$(CONFIG_NET_VENDOR_MICREL) += micrel/

diff --git a/drivers/net/jme.c b/drivers/net/ethernet/jme.c
similarity index 100%
rename from drivers/net/jme.c
rename to drivers/net/ethernet/jme.c

diff --git a/drivers/net/jme.h b/drivers/net/ethernet/jme.h
similarity index 100%
rename from drivers/net/jme.h
rename to drivers/net/ethernet/jme.h