-/* arch/arm/mach-s3c2410/include/mach/fb.h
- *
- * Copyright (c) 2004 Arnaud Patard <arnaud.patard@rtp-net.org>
- *
- * Inspired by pxafb.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARM_FB_H
-#define __ASM_ARM_FB_H
-
-#include <mach/regs-lcd.h>
-
-struct s3c2410fb_hw {
- unsigned long lcdcon1;
- unsigned long lcdcon2;
- unsigned long lcdcon3;
- unsigned long lcdcon4;
- unsigned long lcdcon5;
-};
-
-/* LCD description */
-struct s3c2410fb_display {
- /* LCD type */
- unsigned type;
-
- /* Screen size */
- unsigned short width;
- unsigned short height;
-
- /* Screen info */
- unsigned short xres;
- unsigned short yres;
- unsigned short bpp;
-
- unsigned pixclock; /* pixclock in picoseconds */
- unsigned short left_margin; /* value in pixels (TFT) or HCLKs (STN) */
- unsigned short right_margin; /* value in pixels (TFT) or HCLKs (STN) */
- unsigned short hsync_len; /* value in pixels (TFT) or HCLKs (STN) */
- unsigned short upper_margin; /* value in lines (TFT) or 0 (STN) */
- unsigned short lower_margin; /* value in lines (TFT) or 0 (STN) */
- unsigned short vsync_len; /* value in lines (TFT) or 0 (STN) */
-
- /* lcd configuration registers */
- unsigned long lcdcon5;
-};
-
-struct s3c2410fb_mach_info {
-
- struct s3c2410fb_display *displays; /* attached diplays info */
- unsigned num_displays; /* number of defined displays */
- unsigned default_display;
-
- /* GPIOs */
-
- unsigned long gpcup;
- unsigned long gpcup_mask;
- unsigned long gpccon;
- unsigned long gpccon_mask;
- unsigned long gpdup;
- unsigned long gpdup_mask;
- unsigned long gpdcon;
- unsigned long gpdcon_mask;
-
- /* lpc3600 control register */
- unsigned long lpcsel;
-};
-
-extern void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *);
-
-#endif /* __ASM_ARM_FB_H */
+#include <plat/fb-s3c2410.h>
#include <mach/regs-gpio.h>
#include <mach/leds-gpio.h>
+#include <mach/regs-lcd.h>
#include <plat/regs-serial.h>
#include <mach/fb.h>
#include <plat/nand.h>
#include <mach/regs-gpio.h>
#include <mach/regs-gpioj.h>
+#include <mach/regs-lcd.h>
#include <mach/h1940.h>
#include <mach/fb.h>
obj-y += cpu.o
obj-y += irq.o
-obj-y += devs.o
+obj-y += dev-uart.o
obj-y += clock.o
obj-$(CONFIG_S3C24XX_DCLK) += clock-dclk.o
--- /dev/null
+/* linux/arch/arm/plat-s3c24xx/dev-uart.c
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Base S3C24XX UART resource and platform device definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+#include <plat/regs-serial.h>
+
+/* Serial port registrations */
+
+static struct resource s3c2410_uart0_resource[] = {
+ [0] = {
+ .start = S3C2410_PA_UART0,
+ .end = S3C2410_PA_UART0 + 0x3fff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_S3CUART_RX0,
+ .end = IRQ_S3CUART_ERR0,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct resource s3c2410_uart1_resource[] = {
+ [0] = {
+ .start = S3C2410_PA_UART1,
+ .end = S3C2410_PA_UART1 + 0x3fff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_S3CUART_RX1,
+ .end = IRQ_S3CUART_ERR1,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct resource s3c2410_uart2_resource[] = {
+ [0] = {
+ .start = S3C2410_PA_UART2,
+ .end = S3C2410_PA_UART2 + 0x3fff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_S3CUART_RX2,
+ .end = IRQ_S3CUART_ERR2,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct resource s3c2410_uart3_resource[] = {
+ [0] = {
+ .start = S3C2443_PA_UART3,
+ .end = S3C2443_PA_UART3 + 0x3fff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_S3CUART_RX3,
+ .end = IRQ_S3CUART_ERR3,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct s3c24xx_uart_resources s3c2410_uart_resources[] __initdata = {
+ [0] = {
+ .resources = s3c2410_uart0_resource,
+ .nr_resources = ARRAY_SIZE(s3c2410_uart0_resource),
+ },
+ [1] = {
+ .resources = s3c2410_uart1_resource,
+ .nr_resources = ARRAY_SIZE(s3c2410_uart1_resource),
+ },
+ [2] = {
+ .resources = s3c2410_uart2_resource,
+ .nr_resources = ARRAY_SIZE(s3c2410_uart2_resource),
+ },
+ [3] = {
+ .resources = s3c2410_uart3_resource,
+ .nr_resources = ARRAY_SIZE(s3c2410_uart3_resource),
+ },
+};
+++ /dev/null
-/* linux/arch/arm/plat-s3c24xx/devs.c
- *
- * Copyright (c) 2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Base S3C24XX platform device definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/dma-mapping.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <mach/fb.h>
-#include <mach/hardware.h>
-#include <mach/dma.h>
-#include <mach/irqs.h>
-#include <asm/irq.h>
-
-#include <plat/regs-serial.h>
-#include <plat/udc.h>
-#include <plat/mci.h>
-
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/regs-spi.h>
-#include <plat/ts.h>
-
-/* Serial port registrations */
-
-static struct resource s3c2410_uart0_resource[] = {
- [0] = {
- .start = S3C2410_PA_UART0,
- .end = S3C2410_PA_UART0 + 0x3fff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_S3CUART_RX0,
- .end = IRQ_S3CUART_ERR0,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct resource s3c2410_uart1_resource[] = {
- [0] = {
- .start = S3C2410_PA_UART1,
- .end = S3C2410_PA_UART1 + 0x3fff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_S3CUART_RX1,
- .end = IRQ_S3CUART_ERR1,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct resource s3c2410_uart2_resource[] = {
- [0] = {
- .start = S3C2410_PA_UART2,
- .end = S3C2410_PA_UART2 + 0x3fff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_S3CUART_RX2,
- .end = IRQ_S3CUART_ERR2,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct resource s3c2410_uart3_resource[] = {
- [0] = {
- .start = S3C2443_PA_UART3,
- .end = S3C2443_PA_UART3 + 0x3fff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_S3CUART_RX3,
- .end = IRQ_S3CUART_ERR3,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct s3c24xx_uart_resources s3c2410_uart_resources[] __initdata = {
- [0] = {
- .resources = s3c2410_uart0_resource,
- .nr_resources = ARRAY_SIZE(s3c2410_uart0_resource),
- },
- [1] = {
- .resources = s3c2410_uart1_resource,
- .nr_resources = ARRAY_SIZE(s3c2410_uart1_resource),
- },
- [2] = {
- .resources = s3c2410_uart2_resource,
- .nr_resources = ARRAY_SIZE(s3c2410_uart2_resource),
- },
- [3] = {
- .resources = s3c2410_uart3_resource,
- .nr_resources = ARRAY_SIZE(s3c2410_uart3_resource),
- },
-};
-
-/* LCD Controller */
-
-static struct resource s3c_lcd_resource[] = {
- [0] = {
- .start = S3C24XX_PA_LCD,
- .end = S3C24XX_PA_LCD + S3C24XX_SZ_LCD - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_LCD,
- .end = IRQ_LCD,
- .flags = IORESOURCE_IRQ,
- }
-
-};
-
-static u64 s3c_device_lcd_dmamask = 0xffffffffUL;
-
-struct platform_device s3c_device_lcd = {
- .name = "s3c2410-lcd",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_lcd_resource),
- .resource = s3c_lcd_resource,
- .dev = {
- .dma_mask = &s3c_device_lcd_dmamask,
- .coherent_dma_mask = 0xffffffffUL
- }
-};
-
-EXPORT_SYMBOL(s3c_device_lcd);
-
-void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd)
-{
- struct s3c2410fb_mach_info *npd;
-
- npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_lcd);
- if (npd) {
- npd->displays = kmemdup(pd->displays,
- sizeof(struct s3c2410fb_display) * npd->num_displays,
- GFP_KERNEL);
- if (!npd->displays)
- printk(KERN_ERR "no memory for LCD display data\n");
- } else {
- printk(KERN_ERR "no memory for LCD platform data\n");
- }
-}
-
-/* Touchscreen */
-
-static struct resource s3c_ts_resource[] = {
- [0] = {
- .start = S3C24XX_PA_ADC,
- .end = S3C24XX_PA_ADC + S3C24XX_SZ_ADC - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_TC,
- .end = IRQ_TC,
- .flags = IORESOURCE_IRQ,
- },
-
-};
-
-struct platform_device s3c_device_ts = {
- .name = "s3c2410-ts",
- .id = -1,
- .dev.parent = &s3c_device_adc.dev,
- .num_resources = ARRAY_SIZE(s3c_ts_resource),
- .resource = s3c_ts_resource,
-};
-EXPORT_SYMBOL(s3c_device_ts);
-
-void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *hard_s3c2410ts_info)
-{
- s3c_set_platdata(hard_s3c2410ts_info,
- sizeof(struct s3c2410_ts_mach_info), &s3c_device_ts);
-}
-
-/* USB Device (Gadget)*/
-
-static struct resource s3c_usbgadget_resource[] = {
- [0] = {
- .start = S3C24XX_PA_USBDEV,
- .end = S3C24XX_PA_USBDEV + S3C24XX_SZ_USBDEV - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_USBD,
- .end = IRQ_USBD,
- .flags = IORESOURCE_IRQ,
- }
-
-};
-
-struct platform_device s3c_device_usbgadget = {
- .name = "s3c2410-usbgadget",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_usbgadget_resource),
- .resource = s3c_usbgadget_resource,
-};
-
-EXPORT_SYMBOL(s3c_device_usbgadget);
-
-void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *pd)
-{
- s3c_set_platdata(pd, sizeof(*pd), &s3c_device_usbgadget);
-}
-
-/* USB High Speed 2.0 Device (Gadget) */
-static struct resource s3c_hsudc_resource[] = {
- [0] = {
- .start = S3C2416_PA_HSUDC,
- .end = S3C2416_PA_HSUDC + S3C2416_SZ_HSUDC - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_USBD,
- .end = IRQ_USBD,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static u64 s3c_hsudc_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device s3c_device_usb_hsudc = {
- .name = "s3c-hsudc",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_hsudc_resource),
- .resource = s3c_hsudc_resource,
- .dev = {
- .dma_mask = &s3c_hsudc_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-void __init s3c24xx_hsudc_set_platdata(struct s3c24xx_hsudc_platdata *pd)
-{
- s3c_set_platdata(pd, sizeof(*pd), &s3c_device_usb_hsudc);
-}
-
-/* IIS */
-
-static struct resource s3c_iis_resource[] = {
- [0] = {
- .start = S3C24XX_PA_IIS,
- .end = S3C24XX_PA_IIS + S3C24XX_SZ_IIS -1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static u64 s3c_device_iis_dmamask = 0xffffffffUL;
-
-struct platform_device s3c_device_iis = {
- .name = "s3c24xx-iis",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_iis_resource),
- .resource = s3c_iis_resource,
- .dev = {
- .dma_mask = &s3c_device_iis_dmamask,
- .coherent_dma_mask = 0xffffffffUL
- }
-};
-
-EXPORT_SYMBOL(s3c_device_iis);
-
-/* RTC */
-
-static struct resource s3c_rtc_resource[] = {
- [0] = {
- .start = S3C24XX_PA_RTC,
- .end = S3C24XX_PA_RTC + 0xff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_RTC,
- .end = IRQ_RTC,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = IRQ_TICK,
- .end = IRQ_TICK,
- .flags = IORESOURCE_IRQ
- }
-};
-
-struct platform_device s3c_device_rtc = {
- .name = "s3c2410-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_rtc_resource),
- .resource = s3c_rtc_resource,
-};
-
-EXPORT_SYMBOL(s3c_device_rtc);
-
-/* ADC */
-
-static struct resource s3c_adc_resource[] = {
- [0] = {
- .start = S3C24XX_PA_ADC,
- .end = S3C24XX_PA_ADC + S3C24XX_SZ_ADC - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_TC,
- .end = IRQ_TC,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = IRQ_ADC,
- .end = IRQ_ADC,
- .flags = IORESOURCE_IRQ,
- }
-
-};
-
-struct platform_device s3c_device_adc = {
- .name = "s3c24xx-adc",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_adc_resource),
- .resource = s3c_adc_resource,
-};
-
-/* SDI */
-
-static struct resource s3c_sdi_resource[] = {
- [0] = {
- .start = S3C24XX_PA_SDI,
- .end = S3C24XX_PA_SDI + S3C24XX_SZ_SDI - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_SDI,
- .end = IRQ_SDI,
- .flags = IORESOURCE_IRQ,
- }
-
-};
-
-struct platform_device s3c_device_sdi = {
- .name = "s3c2410-sdi",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_sdi_resource),
- .resource = s3c_sdi_resource,
-};
-
-EXPORT_SYMBOL(s3c_device_sdi);
-
-void __init s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata)
-{
- s3c_set_platdata(pdata, sizeof(struct s3c24xx_mci_pdata),
- &s3c_device_sdi);
-}
-
-
-/* SPI (0) */
-
-static struct resource s3c_spi0_resource[] = {
- [0] = {
- .start = S3C24XX_PA_SPI,
- .end = S3C24XX_PA_SPI + 0x1f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_SPI0,
- .end = IRQ_SPI0,
- .flags = IORESOURCE_IRQ,
- }
-
-};
-
-static u64 s3c_device_spi0_dmamask = 0xffffffffUL;
-
-struct platform_device s3c_device_spi0 = {
- .name = "s3c2410-spi",
- .id = 0,
- .num_resources = ARRAY_SIZE(s3c_spi0_resource),
- .resource = s3c_spi0_resource,
- .dev = {
- .dma_mask = &s3c_device_spi0_dmamask,
- .coherent_dma_mask = 0xffffffffUL
- }
-};
-
-EXPORT_SYMBOL(s3c_device_spi0);
-
-/* SPI (1) */
-
-static struct resource s3c_spi1_resource[] = {
- [0] = {
- .start = S3C24XX_PA_SPI + S3C2410_SPI1,
- .end = S3C24XX_PA_SPI + S3C2410_SPI1 + 0x1f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_SPI1,
- .end = IRQ_SPI1,
- .flags = IORESOURCE_IRQ,
- }
-
-};
-
-static u64 s3c_device_spi1_dmamask = 0xffffffffUL;
-
-struct platform_device s3c_device_spi1 = {
- .name = "s3c2410-spi",
- .id = 1,
- .num_resources = ARRAY_SIZE(s3c_spi1_resource),
- .resource = s3c_spi1_resource,
- .dev = {
- .dma_mask = &s3c_device_spi1_dmamask,
- .coherent_dma_mask = 0xffffffffUL
- }
-};
-
-EXPORT_SYMBOL(s3c_device_spi1);
-
-#ifdef CONFIG_CPU_S3C2440
-
-/* Camif Controller */
-
-static struct resource s3c_camif_resource[] = {
- [0] = {
- .start = S3C2440_PA_CAMIF,
- .end = S3C2440_PA_CAMIF + S3C2440_SZ_CAMIF - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_CAM,
- .end = IRQ_CAM,
- .flags = IORESOURCE_IRQ,
- }
-
-};
-
-static u64 s3c_device_camif_dmamask = 0xffffffffUL;
-
-struct platform_device s3c_device_camif = {
- .name = "s3c2440-camif",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_camif_resource),
- .resource = s3c_camif_resource,
- .dev = {
- .dma_mask = &s3c_device_camif_dmamask,
- .coherent_dma_mask = 0xffffffffUL
- }
-};
-
-EXPORT_SYMBOL(s3c_device_camif);
-
-/* AC97 */
-
-static struct resource s3c_ac97_resource[] = {
- [0] = {
- .start = S3C2440_PA_AC97,
- .end = S3C2440_PA_AC97 + S3C2440_SZ_AC97 -1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_S3C244x_AC97,
- .end = IRQ_S3C244x_AC97,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .name = "PCM out",
- .start = DMACH_PCM_OUT,
- .end = DMACH_PCM_OUT,
- .flags = IORESOURCE_DMA,
- },
- [3] = {
- .name = "PCM in",
- .start = DMACH_PCM_IN,
- .end = DMACH_PCM_IN,
- .flags = IORESOURCE_DMA,
- },
- [4] = {
- .name = "Mic in",
- .start = DMACH_MIC_IN,
- .end = DMACH_MIC_IN,
- .flags = IORESOURCE_DMA,
- },
-};
-
-static u64 s3c_device_audio_dmamask = 0xffffffffUL;
-
-struct platform_device s3c_device_ac97 = {
- .name = "samsung-ac97",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_ac97_resource),
- .resource = s3c_ac97_resource,
- .dev = {
- .dma_mask = &s3c_device_audio_dmamask,
- .coherent_dma_mask = 0xffffffffUL
- }
-};
-
-EXPORT_SYMBOL(s3c_device_ac97);
-
-/* ASoC I2S */
-
-struct platform_device s3c2412_device_iis = {
- .name = "s3c2412-iis",
- .id = -1,
- .dev = {
- .dma_mask = &s3c_device_audio_dmamask,
- .coherent_dma_mask = 0xffffffffUL
- }
-};
-
-EXPORT_SYMBOL(s3c2412_device_iis);
-
-#endif // CONFIG_CPU_S32440
-# arch/arm/plat-s3c64xx/Makefile
+# arch/arm/plat-samsung/Makefile
#
# Copyright 2009 Simtec Electronics
#
obj-y += platformdata.o
+obj-y += devs.o
obj-$(CONFIG_S3C_DEV_HSMMC) += dev-hsmmc.o
obj-$(CONFIG_S3C_DEV_HSMMC1) += dev-hsmmc1.o
obj-$(CONFIG_S3C_DEV_HSMMC2) += dev-hsmmc2.o
--- /dev/null
+/* linux/arch/arm/plat-samsung/devs.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Base SAMSUNG platform device definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/dma.h>
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/fb.h>
+#include <plat/fb-s3c2410.h>
+#include <plat/mci.h>
+#include <plat/ts.h>
+#include <plat/udc.h>
+#include <plat/regs-serial.h>
+#include <plat/regs-spi.h>
+
+static u64 samsung_device_dma_mask = DMA_BIT_MASK(32);
+
+/* AC97 */
+#ifdef CONFIG_CPU_S3C2440
+static struct resource s3c_ac97_resource[] = {
+ [0] = {
+ .start = S3C2440_PA_AC97,
+ .end = S3C2440_PA_AC97 + S3C2440_SZ_AC97 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_S3C244x_AC97,
+ .end = IRQ_S3C244x_AC97,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .name = "PCM out",
+ .start = DMACH_PCM_OUT,
+ .end = DMACH_PCM_OUT,
+ .flags = IORESOURCE_DMA,
+ },
+ [3] = {
+ .name = "PCM in",
+ .start = DMACH_PCM_IN,
+ .end = DMACH_PCM_IN,
+ .flags = IORESOURCE_DMA,
+ },
+ [4] = {
+ .name = "Mic in",
+ .start = DMACH_MIC_IN,
+ .end = DMACH_MIC_IN,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device s3c_device_ac97 = {
+ .name = "samsung-ac97",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s3c_ac97_resource),
+ .resource = s3c_ac97_resource,
+ .dev = {
+ .dma_mask = &samsung_device_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ }
+};
+#endif /* CONFIG_CPU_S3C2440 */
+
+/* ADC */
+
+#ifdef CONFIG_PLAT_S3C24XX
+static struct resource s3c_adc_resource[] = {
+ [0] = {
+ .start = S3C24XX_PA_ADC,
+ .end = S3C24XX_PA_ADC + S3C24XX_SZ_ADC - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_TC,
+ .end = IRQ_TC,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = IRQ_ADC,
+ .end = IRQ_ADC,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+struct platform_device s3c_device_adc = {
+ .name = "s3c24xx-adc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s3c_adc_resource),
+ .resource = s3c_adc_resource,
+};
+#endif /* CONFIG_PLAT_S3C24XX */
+
+/* Camif Controller */
+
+#ifdef CONFIG_CPU_S3C2440
+static struct resource s3c_camif_resource[] = {
+ [0] = {
+ .start = S3C2440_PA_CAMIF,
+ .end = S3C2440_PA_CAMIF + S3C2440_SZ_CAMIF - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_CAM,
+ .end = IRQ_CAM,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+struct platform_device s3c_device_camif = {
+ .name = "s3c2440-camif",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s3c_camif_resource),
+ .resource = s3c_camif_resource,
+ .dev = {
+ .dma_mask = &samsung_device_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ }
+};
+#endif /* CONFIG_CPU_S3C2440 */
+
+/* I2S */
+
+#ifdef CONFIG_PLAT_S3C24XX
+static struct resource s3c_iis_resource[] = {
+ [0] = {
+ .start = S3C24XX_PA_IIS,
+ .end = S3C24XX_PA_IIS + S3C24XX_SZ_IIS - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+struct platform_device s3c_device_iis = {
+ .name = "s3c24xx-iis",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s3c_iis_resource),
+ .resource = s3c_iis_resource,
+ .dev = {
+ .dma_mask = &samsung_device_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ }
+};
+#endif /* CONFIG_PLAT_S3C24XX */
+
+#ifdef CONFIG_CPU_S3C2440
+struct platform_device s3c2412_device_iis = {
+ .name = "s3c2412-iis",
+ .id = -1,
+ .dev = {
+ .dma_mask = &samsung_device_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ }
+};
+#endif /* CONFIG_CPU_S3C2440 */
+
+/* LCD Controller */
+
+#ifdef CONFIG_PLAT_S3C24XX
+static struct resource s3c_lcd_resource[] = {
+ [0] = {
+ .start = S3C24XX_PA_LCD,
+ .end = S3C24XX_PA_LCD + S3C24XX_SZ_LCD - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_LCD,
+ .end = IRQ_LCD,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+struct platform_device s3c_device_lcd = {
+ .name = "s3c2410-lcd",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s3c_lcd_resource),
+ .resource = s3c_lcd_resource,
+ .dev = {
+ .dma_mask = &samsung_device_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ }
+};
+
+void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd)
+{
+ struct s3c2410fb_mach_info *npd;
+
+ npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_lcd);
+ if (npd) {
+ npd->displays = kmemdup(pd->displays,
+ sizeof(struct s3c2410fb_display) * npd->num_displays,
+ GFP_KERNEL);
+ if (!npd->displays)
+ printk(KERN_ERR "no memory for LCD display data\n");
+ } else {
+ printk(KERN_ERR "no memory for LCD platform data\n");
+ }
+}
+#endif /* CONFIG_PLAT_S3C24XX */
+
+/* RTC */
+
+#ifdef CONFIG_PLAT_S3C24XX
+static struct resource s3c_rtc_resource[] = {
+ [0] = {
+ .start = S3C24XX_PA_RTC,
+ .end = S3C24XX_PA_RTC + 0xff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_RTC,
+ .end = IRQ_RTC,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = IRQ_TICK,
+ .end = IRQ_TICK,
+ .flags = IORESOURCE_IRQ
+ }
+};
+
+struct platform_device s3c_device_rtc = {
+ .name = "s3c2410-rtc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s3c_rtc_resource),
+ .resource = s3c_rtc_resource,
+};
+#endif /* CONFIG_PLAT_S3C24XX */
+
+/* SDI */
+
+#ifdef CONFIG_PLAT_S3C24XX
+static struct resource s3c_sdi_resource[] = {
+ [0] = {
+ .start = S3C24XX_PA_SDI,
+ .end = S3C24XX_PA_SDI + S3C24XX_SZ_SDI - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_SDI,
+ .end = IRQ_SDI,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+struct platform_device s3c_device_sdi = {
+ .name = "s3c2410-sdi",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s3c_sdi_resource),
+ .resource = s3c_sdi_resource,
+};
+
+void __init s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata)
+{
+ s3c_set_platdata(pdata, sizeof(struct s3c24xx_mci_pdata),
+ &s3c_device_sdi);
+}
+#endif /* CONFIG_PLAT_S3C24XX */
+
+/* SPI */
+
+#ifdef CONFIG_PLAT_S3C24XX
+static struct resource s3c_spi0_resource[] = {
+ [0] = {
+ .start = S3C24XX_PA_SPI,
+ .end = S3C24XX_PA_SPI + 0x1f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_SPI0,
+ .end = IRQ_SPI0,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+struct platform_device s3c_device_spi0 = {
+ .name = "s3c2410-spi",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(s3c_spi0_resource),
+ .resource = s3c_spi0_resource,
+ .dev = {
+ .dma_mask = &samsung_device_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ }
+};
+
+static struct resource s3c_spi1_resource[] = {
+ [0] = {
+ .start = S3C24XX_PA_SPI + S3C2410_SPI1,
+ .end = S3C24XX_PA_SPI + S3C2410_SPI1 + 0x1f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_SPI1,
+ .end = IRQ_SPI1,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+struct platform_device s3c_device_spi1 = {
+ .name = "s3c2410-spi",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(s3c_spi1_resource),
+ .resource = s3c_spi1_resource,
+ .dev = {
+ .dma_mask = &samsung_device_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ }
+};
+#endif /* CONFIG_PLAT_S3C24XX */
+
+/* Touchscreen */
+
+#ifdef CONFIG_PLAT_S3C24XX
+static struct resource s3c_ts_resource[] = {
+ [0] = {
+ .start = S3C24XX_PA_ADC,
+ .end = S3C24XX_PA_ADC + S3C24XX_SZ_ADC - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_TC,
+ .end = IRQ_TC,
+ .flags = IORESOURCE_IRQ,
+ },
+
+};
+
+struct platform_device s3c_device_ts = {
+ .name = "s3c2410-ts",
+ .id = -1,
+ .dev.parent = &s3c_device_adc.dev,
+ .num_resources = ARRAY_SIZE(s3c_ts_resource),
+ .resource = s3c_ts_resource,
+};
+
+void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *hard_s3c2410ts_info)
+{
+ s3c_set_platdata(hard_s3c2410ts_info,
+ sizeof(struct s3c2410_ts_mach_info), &s3c_device_ts);
+}
+#endif /* CONFIG_PLAT_S3C24XX */
+
+/* USB Device (Gadget) */
+
+#ifdef CONFIG_PLAT_S3C24XX
+static struct resource s3c_usbgadget_resource[] = {
+ [0] = {
+ .start = S3C24XX_PA_USBDEV,
+ .end = S3C24XX_PA_USBDEV + S3C24XX_SZ_USBDEV - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_USBD,
+ .end = IRQ_USBD,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+struct platform_device s3c_device_usbgadget = {
+ .name = "s3c2410-usbgadget",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s3c_usbgadget_resource),
+ .resource = s3c_usbgadget_resource,
+};
+
+void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *pd)
+{
+ s3c_set_platdata(pd, sizeof(*pd), &s3c_device_usbgadget);
+}
+#endif /* CONFIG_PLAT_S3C24XX */
+
+/* USB High Spped 2.0 Device (Gadget) */
+
+#ifdef CONFIG_PLAT_S3C24XX
+static struct resource s3c_hsudc_resource[] = {
+ [0] = {
+ .start = S3C2416_PA_HSUDC,
+ .end = S3C2416_PA_HSUDC + S3C2416_SZ_HSUDC - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_USBD,
+ .end = IRQ_USBD,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+struct platform_device s3c_device_usb_hsudc = {
+ .name = "s3c-hsudc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s3c_hsudc_resource),
+ .resource = s3c_hsudc_resource,
+ .dev = {
+ .dma_mask = &samsung_device_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+void __init s3c24xx_hsudc_set_platdata(struct s3c24xx_hsudc_platdata *pd)
+{
+ s3c_set_platdata(pd, sizeof(*pd), &s3c_device_usb_hsudc);
+}
+#endif /* CONFIG_PLAT_S3C24XX */
--- /dev/null
+/* arch/arm/plat-samsung/include/plat/fb-s3c2410.h
+ *
+ * Copyright (c) 2004 Arnaud Patard <arnaud.patard@rtp-net.org>
+ *
+ * Inspired by pxafb.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_FB_S3C2410_H
+#define __ASM_PLAT_FB_S3C2410_H __FILE__
+
+struct s3c2410fb_hw {
+ unsigned long lcdcon1;
+ unsigned long lcdcon2;
+ unsigned long lcdcon3;
+ unsigned long lcdcon4;
+ unsigned long lcdcon5;
+};
+
+/* LCD description */
+struct s3c2410fb_display {
+ /* LCD type */
+ unsigned type;
+
+ /* Screen size */
+ unsigned short width;
+ unsigned short height;
+
+ /* Screen info */
+ unsigned short xres;
+ unsigned short yres;
+ unsigned short bpp;
+
+ unsigned pixclock; /* pixclock in picoseconds */
+ unsigned short left_margin; /* value in pixels (TFT) or HCLKs (STN) */
+ unsigned short right_margin; /* value in pixels (TFT) or HCLKs (STN) */
+ unsigned short hsync_len; /* value in pixels (TFT) or HCLKs (STN) */
+ unsigned short upper_margin; /* value in lines (TFT) or 0 (STN) */
+ unsigned short lower_margin; /* value in lines (TFT) or 0 (STN) */
+ unsigned short vsync_len; /* value in lines (TFT) or 0 (STN) */
+
+ /* lcd configuration registers */
+ unsigned long lcdcon5;
+};
+
+struct s3c2410fb_mach_info {
+
+ struct s3c2410fb_display *displays; /* attached diplays info */
+ unsigned num_displays; /* number of defined displays */
+ unsigned default_display;
+
+ /* GPIOs */
+
+ unsigned long gpcup;
+ unsigned long gpcup_mask;
+ unsigned long gpccon;
+ unsigned long gpccon_mask;
+ unsigned long gpdup;
+ unsigned long gpdup_mask;
+ unsigned long gpdcon;
+ unsigned long gpdcon_mask;
+
+ /* lpc3600 control register */
+ unsigned long lpcsel;
+};
+
+extern void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *);
+
+#endif /* __ASM_PLAT_FB_S3C2410_H */
git.openpandora.org / pandora-kernel.git / commitdiff