#include <mach/common.h>
#include <mach/time.h>
#include <mach/da8xx.h>
+#include <mach/gpio-davinci.h>
#include "clock.h"
#include "mux.h"
#include <mach/da8xx.h>
#include <mach/cpufreq.h>
#include <mach/pm.h>
+#include <mach/gpio-davinci.h>
#include "clock.h"
#include "mux.h"
#include <linux/serial_8250.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <mach/common.h>
#include <mach/asp.h>
#include <mach/spi.h>
+#include <mach/gpio-davinci.h>
#include "clock.h"
#include "mux.h"
#include <linux/serial_8250.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <asm/mach/map.h>
#include <mach/asp.h>
#include <mach/keyscan.h>
#include <mach/spi.h>
-
+#include <mach/gpio-davinci.h>
#include "clock.h"
#include "mux.h"
#include <linux/clk.h>
#include <linux/serial_8250.h>
#include <linux/platform_device.h>
-#include <linux/gpio.h>
#include <asm/mach/map.h>
#include <mach/serial.h>
#include <mach/common.h>
#include <mach/asp.h>
+#include <mach/gpio-davinci.h>
#include "clock.h"
#include "mux.h"
#include <linux/clk.h>
#include <linux/serial_8250.h>
#include <linux/platform_device.h>
-#include <linux/gpio.h>
#include <asm/mach/map.h>
#include <mach/serial.h>
#include <mach/common.h>
#include <mach/asp.h>
+#include <mach/gpio-davinci.h>
#include "clock.h"
#include "mux.h"
--- /dev/null
+/*
+ * TI DaVinci GPIO Support
+ *
+ * Copyright (c) 2006 David Brownell
+ * Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __DAVINCI_DAVINCI_GPIO_H
+#define __DAVINCI_DAVINCI_GPIO_H
+
+#include <linux/io.h>
+#include <linux/spinlock.h>
+
+#include <asm-generic/gpio.h>
+
+#include <mach/irqs.h>
+#include <mach/common.h>
+
+#define DAVINCI_GPIO_BASE 0x01C67000
+
+enum davinci_gpio_type {
+ GPIO_TYPE_DAVINCI = 0,
+ GPIO_TYPE_TNETV107X,
+};
+
+/*
+ * basic gpio routines
+ *
+ * board-specific init should be done by arch/.../.../board-XXX.c (maybe
+ * initializing banks together) rather than boot loaders; kexec() won't
+ * go through boot loaders.
+ *
+ * the gpio clock will be turned on when gpios are used, and you may also
+ * need to pay attention to PINMUX registers to be sure those pins are
+ * used as gpios, not with other peripherals.
+ *
+ * On-chip GPIOs are numbered 0..(DAVINCI_N_GPIO-1). For documentation,
+ * and maybe for later updates, code may write GPIO(N). These may be
+ * all 1.8V signals, all 3.3V ones, or a mix of the two. A given chip
+ * may not support all the GPIOs in that range.
+ *
+ * GPIOs can also be on external chips, numbered after the ones built-in
+ * to the DaVinci chip. For now, they won't be usable as IRQ sources.
+ */
+#define GPIO(X) (X) /* 0 <= X <= (DAVINCI_N_GPIO - 1) */
+
+/* Convert GPIO signal to GPIO pin number */
+#define GPIO_TO_PIN(bank, gpio) (16 * (bank) + (gpio))
+
+struct davinci_gpio_controller {
+ struct gpio_chip chip;
+ int irq_base;
+ spinlock_t lock;
+ void __iomem *regs;
+ void __iomem *set_data;
+ void __iomem *clr_data;
+ void __iomem *in_data;
+};
+
+/* The __gpio_to_controller() and __gpio_mask() functions inline to constants
+ * with constant parameters; or in outlined code they execute at runtime.
+ *
+ * You'd access the controller directly when reading or writing more than
+ * one gpio value at a time, and to support wired logic where the value
+ * being driven by the cpu need not match the value read back.
+ *
+ * These are NOT part of the cross-platform GPIO interface
+ */
+static inline struct davinci_gpio_controller *
+__gpio_to_controller(unsigned gpio)
+{
+ struct davinci_gpio_controller *ctlrs = davinci_soc_info.gpio_ctlrs;
+ int index = gpio / 32;
+
+ if (!ctlrs || index >= davinci_soc_info.gpio_ctlrs_num)
+ return NULL;
+
+ return ctlrs + index;
+}
+
+static inline u32 __gpio_mask(unsigned gpio)
+{
+ return 1 << (gpio % 32);
+}
+
+#endif /* __DAVINCI_DAVINCI_GPIO_H */
#ifndef __DAVINCI_GPIO_H
#define __DAVINCI_GPIO_H
-#include <linux/io.h>
-#include <linux/spinlock.h>
-
#include <asm-generic/gpio.h>
-#include <mach/irqs.h>
-#include <mach/common.h>
-
-#define __ARM_GPIOLIB_COMPLEX
-
-#define DAVINCI_GPIO_BASE 0x01C67000
-
-enum davinci_gpio_type {
- GPIO_TYPE_DAVINCI = 0,
- GPIO_TYPE_TNETV107X,
-};
-
-/*
- * basic gpio routines
- *
- * board-specific init should be done by arch/.../.../board-XXX.c (maybe
- * initializing banks together) rather than boot loaders; kexec() won't
- * go through boot loaders.
- *
- * the gpio clock will be turned on when gpios are used, and you may also
- * need to pay attention to PINMUX registers to be sure those pins are
- * used as gpios, not with other peripherals.
- *
- * On-chip GPIOs are numbered 0..(DAVINCI_N_GPIO-1). For documentation,
- * and maybe for later updates, code may write GPIO(N). These may be
- * all 1.8V signals, all 3.3V ones, or a mix of the two. A given chip
- * may not support all the GPIOs in that range.
- *
- * GPIOs can also be on external chips, numbered after the ones built-in
- * to the DaVinci chip. For now, they won't be usable as IRQ sources.
- */
-#define GPIO(X) (X) /* 0 <= X <= (DAVINCI_N_GPIO - 1) */
-
-/* Convert GPIO signal to GPIO pin number */
-#define GPIO_TO_PIN(bank, gpio) (16 * (bank) + (gpio))
-
-struct davinci_gpio_controller {
- struct gpio_chip chip;
- int irq_base;
- spinlock_t lock;
- void __iomem *regs;
- void __iomem *set_data;
- void __iomem *clr_data;
- void __iomem *in_data;
-};
-
-/* The __gpio_to_controller() and __gpio_mask() functions inline to constants
- * with constant parameters; or in outlined code they execute at runtime.
- *
- * You'd access the controller directly when reading or writing more than
- * one gpio value at a time, and to support wired logic where the value
- * being driven by the cpu need not match the value read back.
- *
- * These are NOT part of the cross-platform GPIO interface
- */
-static inline struct davinci_gpio_controller *
-__gpio_to_controller(unsigned gpio)
-{
- struct davinci_gpio_controller *ctlrs = davinci_soc_info.gpio_ctlrs;
- int index = gpio / 32;
-
- if (!ctlrs || index >= davinci_soc_info.gpio_ctlrs_num)
- return NULL;
-
- return ctlrs + index;
-}
-
-static inline u32 __gpio_mask(unsigned gpio)
-{
- return 1 << (gpio % 32);
-}
+/* The inline versions use the static inlines in the driver header */
+#include "gpio-davinci.h"
/*
* The get/set/clear functions will inline when called with constant
#include <mach/irqs.h>
#include <mach/hardware.h>
#include <mach/tnetv107x.h>
+#include <mach/gpio-davinci.h>
#include "clock.h"
#include "mux.h"
git.openpandora.org / pandora-kernel.git / commitdiff