hot-remove the PCI device and any of its children.
Depends on CONFIG_HOTPLUG.
+What: /sys/bus/pci/devices/.../pci_bus/.../rescan
+Date: May 2011
+Contact: Linux PCI developers <linux-pci@vger.kernel.org>
+Description:
+ Writing a non-zero value to this attribute will
+ force a rescan of the bus and all child buses,
+ and re-discover devices removed earlier from this
+ part of the device tree. Depends on CONFIG_HOTPLUG.
+
What: /sys/bus/pci/devices/.../rescan
Date: January 2009
Contact: Linux PCI developers <linux-pci@vger.kernel.org>
#include "pci_64.h"
#endif
-void dma32_reserve_bootmem(void);
-
/* implement the pci_ DMA API in terms of the generic device dma_ one */
#include <asm-generic/pci-dma-compat.h>
}
EXPORT_SYMBOL(dma_set_mask);
-#if defined(CONFIG_X86_64) && !defined(CONFIG_NUMA)
-static __initdata void *dma32_bootmem_ptr;
-static unsigned long dma32_bootmem_size __initdata = (128ULL<<20);
-
-static int __init parse_dma32_size_opt(char *p)
-{
- if (!p)
- return -EINVAL;
- dma32_bootmem_size = memparse(p, &p);
- return 0;
-}
-early_param("dma32_size", parse_dma32_size_opt);
-
-void __init dma32_reserve_bootmem(void)
-{
- unsigned long size, align;
- if (max_pfn <= MAX_DMA32_PFN)
- return;
-
- /*
- * check aperture_64.c allocate_aperture() for reason about
- * using 512M as goal
- */
- align = 64ULL<<20;
- size = roundup(dma32_bootmem_size, align);
- dma32_bootmem_ptr = __alloc_bootmem_nopanic(size, align,
- 512ULL<<20);
- /*
- * Kmemleak should not scan this block as it may not be mapped via the
- * kernel direct mapping.
- */
- kmemleak_ignore(dma32_bootmem_ptr);
- if (dma32_bootmem_ptr)
- dma32_bootmem_size = size;
- else
- dma32_bootmem_size = 0;
-}
-static void __init dma32_free_bootmem(void)
-{
-
- if (max_pfn <= MAX_DMA32_PFN)
- return;
-
- if (!dma32_bootmem_ptr)
- return;
-
- free_bootmem(__pa(dma32_bootmem_ptr), dma32_bootmem_size);
-
- dma32_bootmem_ptr = NULL;
- dma32_bootmem_size = 0;
-}
-#else
-void __init dma32_reserve_bootmem(void)
-{
-}
-static void __init dma32_free_bootmem(void)
-{
-}
-
-#endif
-
void __init pci_iommu_alloc(void)
{
struct iommu_table_entry *p;
- /* free the range so iommu could get some range less than 4G */
- dma32_free_bootmem();
-
sort_iommu_table(__iommu_table, __iommu_table_end);
check_iommu_entries(__iommu_table, __iommu_table_end);
initmem_init();
memblock_find_dma_reserve();
- dma32_reserve_bootmem();
#ifdef CONFIG_KVM_CLOCK
kvmclock_init();
int __init pci_direct_probe(void)
{
- struct resource *region, *region2;
-
if ((pci_probe & PCI_PROBE_CONF1) == 0)
goto type2;
- region = request_region(0xCF8, 8, "PCI conf1");
- if (!region)
+ if (!request_region(0xCF8, 8, "PCI conf1"))
goto type2;
if (pci_check_type1()) {
port_cf9_safe = true;
return 1;
}
- release_resource(region);
+ release_region(0xCF8, 8);
type2:
if ((pci_probe & PCI_PROBE_CONF2) == 0)
return 0;
- region = request_region(0xCF8, 4, "PCI conf2");
- if (!region)
+ if (!request_region(0xCF8, 4, "PCI conf2"))
return 0;
- region2 = request_region(0xC000, 0x1000, "PCI conf2");
- if (!region2)
+ if (!request_region(0xC000, 0x1000, "PCI conf2"))
goto fail2;
if (pci_check_type2()) {
return 2;
}
- release_resource(region2);
+ release_region(0xC000, 0x1000);
fail2:
- release_resource(region);
+ release_region(0xCF8, 4);
return 0;
}
|| (device >= PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MIN &&
device <= PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MAX)
|| (device >= PCI_DEVICE_ID_INTEL_DH89XXCC_LPC_MIN &&
- device <= PCI_DEVICE_ID_INTEL_DH89XXCC_LPC_MAX)) {
+ device <= PCI_DEVICE_ID_INTEL_DH89XXCC_LPC_MAX)
+ || (device >= PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MIN &&
+ device <= PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MAX)) {
r->name = "PIIX/ICH";
r->get = pirq_piix_get;
r->set = pirq_piix_set;
if (list_empty(&pci_mmcfg_list))
return;
+ if (pcibios_last_bus < 0) {
+ const struct pci_mmcfg_region *cfg;
+
+ list_for_each_entry(cfg, &pci_mmcfg_list, list) {
+ if (cfg->segment)
+ break;
+ pcibios_last_bus = cfg->end_bus;
+ }
+ }
+
if (pci_mmcfg_arch_init())
pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF;
else {
dev_info(root->bus->bridge,
"ACPI _OSC control (0x%02x) granted\n", flags);
} else {
- dev_dbg(root->bus->bridge,
- "ACPI _OSC request failed (code %d)\n", status);
- printk(KERN_INFO "Unable to assume _OSC PCIe control. "
- "Disabling ASPM\n");
+ dev_info(root->bus->bridge,
+ "ACPI _OSC request failed (%s), "
+ "returned control mask: 0x%02x\n",
+ acpi_format_exception(status), flags);
+ pr_info("ACPI _OSC control for PCIe not granted, "
+ "disabling ASPM\n");
pcie_no_aspm();
}
+ } else {
+ dev_info(root->bus->bridge,
+ "Unable to request _OSC control "
+ "(_OSC support mask: 0x%02x)\n", flags);
}
pci_acpi_add_bus_pm_notifier(device, root->bus);
/* Older devices have their ID defined in <linux/pci_ids.h> */
#define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS 0x1c22
#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS 0x1d22
+#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS 0x1e22
/* Patsburg also has three 'Integrated Device Function' SMBus controllers */
#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0 0x1d70
#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1 0x1d71
#ifdef CONFIG_PCIEASPM
static void __e1000e_disable_aspm(struct pci_dev *pdev, u16 state)
{
- pci_disable_link_state(pdev, state);
+ pci_disable_link_state_locked(pdev, state);
}
#else
static void __e1000e_disable_aspm(struct pci_dev *pdev, u16 state)
__remove_wait_queue(&pci_ucfg_wait, &wait);
}
+/* Returns 0 on success, negative values indicate error. */
#define PCI_USER_READ_CONFIG(size,type) \
int pci_user_read_config_##size \
(struct pci_dev *dev, int pos, type *val) \
{ \
int ret = 0; \
u32 data = -1; \
- if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; \
+ if (PCI_##size##_BAD) \
+ return -EINVAL; \
raw_spin_lock_irq(&pci_lock); \
if (unlikely(dev->block_ucfg_access)) pci_wait_ucfg(dev); \
ret = dev->bus->ops->read(dev->bus, dev->devfn, \
pos, sizeof(type), &data); \
raw_spin_unlock_irq(&pci_lock); \
*val = (type)data; \
+ if (ret > 0) \
+ ret = -EINVAL; \
return ret; \
}
+/* Returns 0 on success, negative values indicate error. */
#define PCI_USER_WRITE_CONFIG(size,type) \
int pci_user_write_config_##size \
(struct pci_dev *dev, int pos, type val) \
{ \
int ret = -EIO; \
- if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; \
+ if (PCI_##size##_BAD) \
+ return -EINVAL; \
raw_spin_lock_irq(&pci_lock); \
if (unlikely(dev->block_ucfg_access)) pci_wait_ucfg(dev); \
ret = dev->bus->ops->write(dev->bus, dev->devfn, \
pos, sizeof(type), val); \
raw_spin_unlock_irq(&pci_lock); \
+ if (ret > 0) \
+ ret = -EINVAL; \
return ret; \
}
* This code has to spin since there is no other notification from the PCI
* hardware. Since the VPD is often implemented by serial attachment to an
* EEPROM, it may take many milliseconds to complete.
+ *
+ * Returns 0 on success, negative values indicate error.
*/
static int pci_vpd_pci22_wait(struct pci_dev *dev)
{
for (;;) {
ret = pci_user_read_config_word(dev, vpd->cap + PCI_VPD_ADDR,
&status);
- if (ret)
+ if (ret < 0)
return ret;
if ((status & PCI_VPD_ADDR_F) == vpd->flag) {
vpd->busy = true;
vpd->flag = 0;
ret = pci_vpd_pci22_wait(dev);
+ if (ret < 0)
+ break;
pos += sizeof(u32);
}
bus->is_added = 1;
- retval = device_create_file(&bus->dev, &dev_attr_cpuaffinity);
- if (retval)
- return retval;
-
- retval = device_create_file(&bus->dev, &dev_attr_cpulistaffinity);
-
/* Create legacy_io and legacy_mem files for this bus */
pci_create_legacy_files(bus);
acpiphp_set_hpp_values(bus);
acpiphp_set_acpi_region(slot);
pci_enable_bridges(bus);
+
+ list_for_each_entry(dev, &bus->devices, bus_list) {
+ /* Assume that newly added devices are powered on already. */
+ if (!dev->is_added)
+ dev->current_state = PCI_D0;
+ }
+
pci_bus_add_devices(bus);
list_for_each_entry(func, &slot->funcs, sibling) {
*/
}
+/* Program PCIE MaxPayload setting on device: ensure parent maxpayload <= device */
+static int pci_set_payload(struct pci_dev *dev)
+{
+ int pos, ppos;
+ u16 pctl, psz;
+ u16 dctl, dsz, dcap, dmax;
+ struct pci_dev *parent;
+
+ parent = dev->bus->self;
+ pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
+ if (!pos)
+ return 0;
+
+ /* Read Device MaxPayload capability and setting */
+ pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &dctl);
+ pci_read_config_word(dev, pos + PCI_EXP_DEVCAP, &dcap);
+ dsz = (dctl & PCI_EXP_DEVCTL_PAYLOAD) >> 5;
+ dmax = (dcap & PCI_EXP_DEVCAP_PAYLOAD);
+
+ /* Read Parent MaxPayload setting */
+ ppos = pci_find_capability(parent, PCI_CAP_ID_EXP);
+ if (!ppos)
+ return 0;
+ pci_read_config_word(parent, ppos + PCI_EXP_DEVCTL, &pctl);
+ psz = (pctl & PCI_EXP_DEVCTL_PAYLOAD) >> 5;
+
+ /* If parent payload > device max payload -> error
+ * If parent payload > device payload -> set speed
+ * If parent payload <= device payload -> do nothing
+ */
+ if (psz > dmax)
+ return -1;
+ else if (psz > dsz) {
+ dev_info(&dev->dev, "Setting MaxPayload to %d\n", 128 << psz);
+ pci_write_config_word(dev, pos + PCI_EXP_DEVCTL,
+ (dctl & ~PCI_EXP_DEVCTL_PAYLOAD) +
+ (psz << 5));
+ }
+ return 0;
+}
+
void pci_configure_slot(struct pci_dev *dev)
{
struct pci_dev *cdev;
(dev->class >> 8) == PCI_CLASS_BRIDGE_PCI)))
return;
+ ret = pci_set_payload(dev);
+ if (ret)
+ dev_warn(&dev->dev, "could not set device max payload\n");
+
memset(&hpp, 0, sizeof(hpp));
ret = pci_get_hp_params(dev, &hpp);
if (ret)
return len;
}
+/*
+ * PCI Bus Class Devices
+ */
+static ssize_t pci_bus_show_cpuaffinity(struct device *dev,
+ int type,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int ret;
+ const struct cpumask *cpumask;
+
+ cpumask = cpumask_of_pcibus(to_pci_bus(dev));
+ ret = type ?
+ cpulist_scnprintf(buf, PAGE_SIZE-2, cpumask) :
+ cpumask_scnprintf(buf, PAGE_SIZE-2, cpumask);
+ buf[ret++] = '\n';
+ buf[ret] = '\0';
+ return ret;
+}
+
+static inline ssize_t pci_bus_show_cpumaskaffinity(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return pci_bus_show_cpuaffinity(dev, 0, attr, buf);
+}
+
+static inline ssize_t pci_bus_show_cpulistaffinity(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return pci_bus_show_cpuaffinity(dev, 1, attr, buf);
+}
+
/* show resources */
static ssize_t
resource_show(struct device * dev, struct device_attribute *attr, char * buf)
count = ret;
return count;
}
+
+static ssize_t
+dev_bus_rescan_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ unsigned long val;
+ struct pci_bus *bus = to_pci_bus(dev);
+
+ if (strict_strtoul(buf, 0, &val) < 0)
+ return -EINVAL;
+
+ if (val) {
+ mutex_lock(&pci_remove_rescan_mutex);
+ pci_rescan_bus(bus);
+ mutex_unlock(&pci_remove_rescan_mutex);
+ }
+ return count;
+}
+
#endif
struct device_attribute pci_dev_attrs[] = {
__ATTR_NULL,
};
+struct device_attribute pcibus_dev_attrs[] = {
+#ifdef CONFIG_HOTPLUG
+ __ATTR(rescan, (S_IWUSR|S_IWGRP), NULL, dev_bus_rescan_store),
+#endif
+ __ATTR(cpuaffinity, S_IRUGO, pci_bus_show_cpumaskaffinity, NULL),
+ __ATTR(cpulistaffinity, S_IRUGO, pci_bus_show_cpulistaffinity, NULL),
+ __ATTR_NULL,
+};
+
static ssize_t
boot_vga_show(struct device *dev, struct device_attribute *attr, char *buf)
{
dev_err(&dev->dev, "buffer not found in %s\n", __func__);
return -ENOMEM;
}
- cap = (u16 *)&save_state->data[0];
+ cap = (u16 *)&save_state->cap.data[0];
pci_read_config_word(dev, pos + PCI_EXP_FLAGS, &flags);
pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
if (!save_state || pos <= 0)
return;
- cap = (u16 *)&save_state->data[0];
+ cap = (u16 *)&save_state->cap.data[0];
pci_read_config_word(dev, pos + PCI_EXP_FLAGS, &flags);
return -ENOMEM;
}
- pci_read_config_word(dev, pos + PCI_X_CMD, (u16 *)save_state->data);
+ pci_read_config_word(dev, pos + PCI_X_CMD,
+ (u16 *)save_state->cap.data);
return 0;
}
pos = pci_find_capability(dev, PCI_CAP_ID_PCIX);
if (!save_state || pos <= 0)
return;
- cap = (u16 *)&save_state->data[0];
+ cap = (u16 *)&save_state->cap.data[0];
pci_write_config_word(dev, pos + PCI_X_CMD, cap[i++]);
}
dev->state_saved = false;
}
+struct pci_saved_state {
+ u32 config_space[16];
+ struct pci_cap_saved_data cap[0];
+};
+
+/**
+ * pci_store_saved_state - Allocate and return an opaque struct containing
+ * the device saved state.
+ * @dev: PCI device that we're dealing with
+ *
+ * Rerturn NULL if no state or error.
+ */
+struct pci_saved_state *pci_store_saved_state(struct pci_dev *dev)
+{
+ struct pci_saved_state *state;
+ struct pci_cap_saved_state *tmp;
+ struct pci_cap_saved_data *cap;
+ struct hlist_node *pos;
+ size_t size;
+
+ if (!dev->state_saved)
+ return NULL;
+
+ size = sizeof(*state) + sizeof(struct pci_cap_saved_data);
+
+ hlist_for_each_entry(tmp, pos, &dev->saved_cap_space, next)
+ size += sizeof(struct pci_cap_saved_data) + tmp->cap.size;
+
+ state = kzalloc(size, GFP_KERNEL);
+ if (!state)
+ return NULL;
+
+ memcpy(state->config_space, dev->saved_config_space,
+ sizeof(state->config_space));
+
+ cap = state->cap;
+ hlist_for_each_entry(tmp, pos, &dev->saved_cap_space, next) {
+ size_t len = sizeof(struct pci_cap_saved_data) + tmp->cap.size;
+ memcpy(cap, &tmp->cap, len);
+ cap = (struct pci_cap_saved_data *)((u8 *)cap + len);
+ }
+ /* Empty cap_save terminates list */
+
+ return state;
+}
+EXPORT_SYMBOL_GPL(pci_store_saved_state);
+
+/**
+ * pci_load_saved_state - Reload the provided save state into struct pci_dev.
+ * @dev: PCI device that we're dealing with
+ * @state: Saved state returned from pci_store_saved_state()
+ */
+int pci_load_saved_state(struct pci_dev *dev, struct pci_saved_state *state)
+{
+ struct pci_cap_saved_data *cap;
+
+ dev->state_saved = false;
+
+ if (!state)
+ return 0;
+
+ memcpy(dev->saved_config_space, state->config_space,
+ sizeof(state->config_space));
+
+ cap = state->cap;
+ while (cap->size) {
+ struct pci_cap_saved_state *tmp;
+
+ tmp = pci_find_saved_cap(dev, cap->cap_nr);
+ if (!tmp || tmp->cap.size != cap->size)
+ return -EINVAL;
+
+ memcpy(tmp->cap.data, cap->data, tmp->cap.size);
+ cap = (struct pci_cap_saved_data *)((u8 *)cap +
+ sizeof(struct pci_cap_saved_data) + cap->size);
+ }
+
+ dev->state_saved = true;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(pci_load_saved_state);
+
+/**
+ * pci_load_and_free_saved_state - Reload the save state pointed to by state,
+ * and free the memory allocated for it.
+ * @dev: PCI device that we're dealing with
+ * @state: Pointer to saved state returned from pci_store_saved_state()
+ */
+int pci_load_and_free_saved_state(struct pci_dev *dev,
+ struct pci_saved_state **state)
+{
+ int ret = pci_load_saved_state(dev, *state);
+ kfree(*state);
+ *state = NULL;
+ return ret;
+}
+EXPORT_SYMBOL_GPL(pci_load_and_free_saved_state);
+
static int do_pci_enable_device(struct pci_dev *dev, int bars)
{
int err;
if (!save_state)
return -ENOMEM;
- save_state->cap_nr = cap;
+ save_state->cap.cap_nr = cap;
+ save_state->cap.size = size;
pci_add_saved_cap(dev, save_state);
return 0;
bridge->ari_enabled = 1;
}
+/**
+ * pci_enable_ido - enable ID-based ordering on a device
+ * @dev: the PCI device
+ * @type: which types of IDO to enable
+ *
+ * Enable ID-based ordering on @dev. @type can contain the bits
+ * %PCI_EXP_IDO_REQUEST and/or %PCI_EXP_IDO_COMPLETION to indicate
+ * which types of transactions are allowed to be re-ordered.
+ */
+void pci_enable_ido(struct pci_dev *dev, unsigned long type)
+{
+ int pos;
+ u16 ctrl;
+
+ pos = pci_pcie_cap(dev);
+ if (!pos)
+ return;
+
+ pci_read_config_word(dev, pos + PCI_EXP_DEVCTL2, &ctrl);
+ if (type & PCI_EXP_IDO_REQUEST)
+ ctrl |= PCI_EXP_IDO_REQ_EN;
+ if (type & PCI_EXP_IDO_COMPLETION)
+ ctrl |= PCI_EXP_IDO_CMP_EN;
+ pci_write_config_word(dev, pos + PCI_EXP_DEVCTL2, ctrl);
+}
+EXPORT_SYMBOL(pci_enable_ido);
+
+/**
+ * pci_disable_ido - disable ID-based ordering on a device
+ * @dev: the PCI device
+ * @type: which types of IDO to disable
+ */
+void pci_disable_ido(struct pci_dev *dev, unsigned long type)
+{
+ int pos;
+ u16 ctrl;
+
+ if (!pci_is_pcie(dev))
+ return;
+
+ pos = pci_pcie_cap(dev);
+ if (!pos)
+ return;
+
+ pci_read_config_word(dev, pos + PCI_EXP_DEVCTL2, &ctrl);
+ if (type & PCI_EXP_IDO_REQUEST)
+ ctrl &= ~PCI_EXP_IDO_REQ_EN;
+ if (type & PCI_EXP_IDO_COMPLETION)
+ ctrl &= ~PCI_EXP_IDO_CMP_EN;
+ pci_write_config_word(dev, pos + PCI_EXP_DEVCTL2, ctrl);
+}
+EXPORT_SYMBOL(pci_disable_ido);
+
+/**
+ * pci_enable_obff - enable optimized buffer flush/fill
+ * @dev: PCI device
+ * @type: type of signaling to use
+ *
+ * Try to enable @type OBFF signaling on @dev. It will try using WAKE#
+ * signaling if possible, falling back to message signaling only if
+ * WAKE# isn't supported. @type should indicate whether the PCIe link
+ * be brought out of L0s or L1 to send the message. It should be either
+ * %PCI_EXP_OBFF_SIGNAL_ALWAYS or %PCI_OBFF_SIGNAL_L0.
+ *
+ * If your device can benefit from receiving all messages, even at the
+ * power cost of bringing the link back up from a low power state, use
+ * %PCI_EXP_OBFF_SIGNAL_ALWAYS. Otherwise, use %PCI_OBFF_SIGNAL_L0 (the
+ * preferred type).
+ *
+ * RETURNS:
+ * Zero on success, appropriate error number on failure.
+ */
+int pci_enable_obff(struct pci_dev *dev, enum pci_obff_signal_type type)
+{
+ int pos;
+ u32 cap;
+ u16 ctrl;
+ int ret;
+
+ if (!pci_is_pcie(dev))
+ return -ENOTSUPP;
+
+ pos = pci_pcie_cap(dev);
+ if (!pos)
+ return -ENOTSUPP;
+
+ pci_read_config_dword(dev, pos + PCI_EXP_DEVCAP2, &cap);
+ if (!(cap & PCI_EXP_OBFF_MASK))
+ return -ENOTSUPP; /* no OBFF support at all */
+
+ /* Make sure the topology supports OBFF as well */
+ if (dev->bus) {
+ ret = pci_enable_obff(dev->bus->self, type);
+ if (ret)
+ return ret;
+ }
+
+ pci_read_config_word(dev, pos + PCI_EXP_DEVCTL2, &ctrl);
+ if (cap & PCI_EXP_OBFF_WAKE)
+ ctrl |= PCI_EXP_OBFF_WAKE_EN;
+ else {
+ switch (type) {
+ case PCI_EXP_OBFF_SIGNAL_L0:
+ if (!(ctrl & PCI_EXP_OBFF_WAKE_EN))
+ ctrl |= PCI_EXP_OBFF_MSGA_EN;
+ break;
+ case PCI_EXP_OBFF_SIGNAL_ALWAYS:
+ ctrl &= ~PCI_EXP_OBFF_WAKE_EN;
+ ctrl |= PCI_EXP_OBFF_MSGB_EN;
+ break;
+ default:
+ WARN(1, "bad OBFF signal type\n");
+ return -ENOTSUPP;
+ }
+ }
+ pci_write_config_word(dev, pos + PCI_EXP_DEVCTL2, ctrl);
+
+ return 0;
+}
+EXPORT_SYMBOL(pci_enable_obff);
+
+/**
+ * pci_disable_obff - disable optimized buffer flush/fill
+ * @dev: PCI device
+ *
+ * Disable OBFF on @dev.
+ */
+void pci_disable_obff(struct pci_dev *dev)
+{
+ int pos;
+ u16 ctrl;
+
+ if (!pci_is_pcie(dev))
+ return;
+
+ pos = pci_pcie_cap(dev);
+ if (!pos)
+ return;
+
+ pci_read_config_word(dev, pos + PCI_EXP_DEVCTL2, &ctrl);
+ ctrl &= ~PCI_EXP_OBFF_WAKE_EN;
+ pci_write_config_word(dev, pos + PCI_EXP_DEVCTL2, ctrl);
+}
+EXPORT_SYMBOL(pci_disable_obff);
+
+/**
+ * pci_ltr_supported - check whether a device supports LTR
+ * @dev: PCI device
+ *
+ * RETURNS:
+ * True if @dev supports latency tolerance reporting, false otherwise.
+ */
+bool pci_ltr_supported(struct pci_dev *dev)
+{
+ int pos;
+ u32 cap;
+
+ if (!pci_is_pcie(dev))
+ return false;
+
+ pos = pci_pcie_cap(dev);
+ if (!pos)
+ return false;
+
+ pci_read_config_dword(dev, pos + PCI_EXP_DEVCAP2, &cap);
+
+ return cap & PCI_EXP_DEVCAP2_LTR;
+}
+EXPORT_SYMBOL(pci_ltr_supported);
+
+/**
+ * pci_enable_ltr - enable latency tolerance reporting
+ * @dev: PCI device
+ *
+ * Enable LTR on @dev if possible, which means enabling it first on
+ * upstream ports.
+ *
+ * RETURNS:
+ * Zero on success, errno on failure.
+ */
+int pci_enable_ltr(struct pci_dev *dev)
+{
+ int pos;
+ u16 ctrl;
+ int ret;
+
+ if (!pci_ltr_supported(dev))
+ return -ENOTSUPP;
+
+ pos = pci_pcie_cap(dev);
+ if (!pos)
+ return -ENOTSUPP;
+
+ /* Only primary function can enable/disable LTR */
+ if (PCI_FUNC(dev->devfn) != 0)
+ return -EINVAL;
+
+ /* Enable upstream ports first */
+ if (dev->bus) {
+ ret = pci_enable_ltr(dev->bus->self);
+ if (ret)
+ return ret;
+ }
+
+ pci_read_config_word(dev, pos + PCI_EXP_DEVCTL2, &ctrl);
+ ctrl |= PCI_EXP_LTR_EN;
+ pci_write_config_word(dev, pos + PCI_EXP_DEVCTL2, ctrl);
+
+ return 0;
+}
+EXPORT_SYMBOL(pci_enable_ltr);
+
+/**
+ * pci_disable_ltr - disable latency tolerance reporting
+ * @dev: PCI device
+ */
+void pci_disable_ltr(struct pci_dev *dev)
+{
+ int pos;
+ u16 ctrl;
+
+ if (!pci_ltr_supported(dev))
+ return;
+
+ pos = pci_pcie_cap(dev);
+ if (!pos)
+ return;
+
+ /* Only primary function can enable/disable LTR */
+ if (PCI_FUNC(dev->devfn) != 0)
+ return;
+
+ pci_read_config_word(dev, pos + PCI_EXP_DEVCTL2, &ctrl);
+ ctrl &= ~PCI_EXP_LTR_EN;
+ pci_write_config_word(dev, pos + PCI_EXP_DEVCTL2, ctrl);
+}
+EXPORT_SYMBOL(pci_disable_ltr);
+
+static int __pci_ltr_scale(int *val)
+{
+ int scale = 0;
+
+ while (*val > 1023) {
+ *val = (*val + 31) / 32;
+ scale++;
+ }
+ return scale;
+}
+
+/**
+ * pci_set_ltr - set LTR latency values
+ * @dev: PCI device
+ * @snoop_lat_ns: snoop latency in nanoseconds
+ * @nosnoop_lat_ns: nosnoop latency in nanoseconds
+ *
+ * Figure out the scale and set the LTR values accordingly.
+ */
+int pci_set_ltr(struct pci_dev *dev, int snoop_lat_ns, int nosnoop_lat_ns)
+{
+ int pos, ret, snoop_scale, nosnoop_scale;
+ u16 val;
+
+ if (!pci_ltr_supported(dev))
+ return -ENOTSUPP;
+
+ snoop_scale = __pci_ltr_scale(&snoop_lat_ns);
+ nosnoop_scale = __pci_ltr_scale(&nosnoop_lat_ns);
+
+ if (snoop_lat_ns > PCI_LTR_VALUE_MASK ||
+ nosnoop_lat_ns > PCI_LTR_VALUE_MASK)
+ return -EINVAL;
+
+ if ((snoop_scale > (PCI_LTR_SCALE_MASK >> PCI_LTR_SCALE_SHIFT)) ||
+ (nosnoop_scale > (PCI_LTR_SCALE_MASK >> PCI_LTR_SCALE_SHIFT)))
+ return -EINVAL;
+
+ pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_LTR);
+ if (!pos)
+ return -ENOTSUPP;
+
+ val = (snoop_scale << PCI_LTR_SCALE_SHIFT) | snoop_lat_ns;
+ ret = pci_write_config_word(dev, pos + PCI_LTR_MAX_SNOOP_LAT, val);
+ if (ret != 4)
+ return -EIO;
+
+ val = (nosnoop_scale << PCI_LTR_SCALE_SHIFT) | nosnoop_lat_ns;
+ ret = pci_write_config_word(dev, pos + PCI_LTR_MAX_NOSNOOP_LAT, val);
+ if (ret != 4)
+ return -EIO;
+
+ return 0;
+}
+EXPORT_SYMBOL(pci_set_ltr);
+
static int pci_acs_enable;
/**
return 0;
}
+/**
+ * pci_pm_reset - Put device into PCI_D3 and back into PCI_D0.
+ * @dev: Device to reset.
+ * @probe: If set, only check if the device can be reset this way.
+ *
+ * If @dev supports native PCI PM and its PCI_PM_CTRL_NO_SOFT_RESET flag is
+ * unset, it will be reinitialized internally when going from PCI_D3hot to
+ * PCI_D0. If that's the case and the device is not in a low-power state
+ * already, force it into PCI_D3hot and back to PCI_D0, causing it to be reset.
+ *
+ * NOTE: This causes the caller to sleep for twice the device power transition
+ * cooldown period, which for the D0->D3hot and D3hot->D0 transitions is 10 ms
+ * by devault (i.e. unless the @dev's d3_delay field has a different value).
+ * Moreover, only devices in D0 can be reset by this function.
+ */
static int pci_pm_reset(struct pci_dev *dev, int probe)
{
u16 csr;
}
extern struct device_attribute pci_dev_attrs[];
-extern struct device_attribute dev_attr_cpuaffinity;
-extern struct device_attribute dev_attr_cpulistaffinity;
+extern struct device_attribute pcibus_dev_attrs[];
#ifdef CONFIG_HOTPLUG
extern struct bus_attribute pci_bus_attrs[];
#else
unsigned long flags;
unsigned int devfn = PCI_DEVFN(einj->dev, einj->fn);
int pos_cap_err, rp_pos_cap_err;
- u32 sever, cor_mask, uncor_mask, cor_mask_orig, uncor_mask_orig;
+ u32 sever, cor_mask, uncor_mask, cor_mask_orig = 0, uncor_mask_orig = 0;
int ret = 0;
dev = pci_get_domain_bus_and_slot((int)einj->domain, einj->bus, devfn);
extern void aer_print_port_info(struct pci_dev *dev, struct aer_err_info *info);
extern irqreturn_t aer_irq(int irq, void *context);
-#ifdef CONFIG_ACPI
-extern int aer_osc_setup(struct pcie_device *pciedev);
-#else
-static inline int aer_osc_setup(struct pcie_device *pciedev)
-{
- return 0;
-}
-#endif
-
#ifdef CONFIG_ACPI_APEI
extern int pcie_aer_get_firmware_first(struct pci_dev *pci_dev);
#else
* the BIOS's expectation, we'll do so once pci_enable_device() is
* called.
*/
- if (aspm_policy != POLICY_POWERSAVE) {
+ if (aspm_policy != POLICY_POWERSAVE || aspm_clear_state) {
pcie_config_aspm_path(link);
pcie_set_clkpm(link, policy_to_clkpm_state(link));
}
* pci_disable_link_state - disable pci device's link state, so the link will
* never enter specific states
*/
-void pci_disable_link_state(struct pci_dev *pdev, int state)
+static void __pci_disable_link_state(struct pci_dev *pdev, int state, bool sem)
{
struct pci_dev *parent = pdev->bus->self;
struct pcie_link_state *link;
if (!parent || !parent->link_state)
return;
- down_read(&pci_bus_sem);
+ if (sem)
+ down_read(&pci_bus_sem);
mutex_lock(&aspm_lock);
link = parent->link_state;
if (state & PCIE_LINK_STATE_L0S)
pcie_set_clkpm(link, 0);
}
mutex_unlock(&aspm_lock);
- up_read(&pci_bus_sem);
+ if (sem)
+ up_read(&pci_bus_sem);
+}
+
+void pci_disable_link_state_locked(struct pci_dev *pdev, int state)
+{
+ __pci_disable_link_state(pdev, state, false);
+}
+EXPORT_SYMBOL(pci_disable_link_state_locked);
+
+void pci_disable_link_state(struct pci_dev *pdev, int state)
+{
+ __pci_disable_link_state(pdev, state, true);
}
EXPORT_SYMBOL(pci_disable_link_state);
}
EXPORT_SYMBOL(no_pci_devices);
-/*
- * PCI Bus Class Devices
- */
-static ssize_t pci_bus_show_cpuaffinity(struct device *dev,
- int type,
- struct device_attribute *attr,
- char *buf)
-{
- int ret;
- const struct cpumask *cpumask;
-
- cpumask = cpumask_of_pcibus(to_pci_bus(dev));
- ret = type?
- cpulist_scnprintf(buf, PAGE_SIZE-2, cpumask) :
- cpumask_scnprintf(buf, PAGE_SIZE-2, cpumask);
- buf[ret++] = '\n';
- buf[ret] = '\0';
- return ret;
-}
-
-static ssize_t inline pci_bus_show_cpumaskaffinity(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- return pci_bus_show_cpuaffinity(dev, 0, attr, buf);
-}
-
-static ssize_t inline pci_bus_show_cpulistaffinity(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- return pci_bus_show_cpuaffinity(dev, 1, attr, buf);
-}
-
-DEVICE_ATTR(cpuaffinity, S_IRUGO, pci_bus_show_cpumaskaffinity, NULL);
-DEVICE_ATTR(cpulistaffinity, S_IRUGO, pci_bus_show_cpulistaffinity, NULL);
-
/*
* PCI Bus Class
*/
static struct class pcibus_class = {
.name = "pci_bus",
.dev_release = &release_pcibus_dev,
+ .dev_attrs = pcibus_dev_attrs,
};
static int __init pcibus_class_init(void)
error = device_register(&b->dev);
if (error)
goto class_dev_reg_err;
- error = device_create_file(&b->dev, &dev_attr_cpuaffinity);
- if (error)
- goto dev_create_file_err;
/* Create legacy_io and legacy_mem files for this bus */
pci_create_legacy_files(b);
return b;
-dev_create_file_err:
- device_unregister(&b->dev);
class_dev_reg_err:
device_unregister(dev);
dev_reg_err:
}
pci_read_config_byte(dev, ICH6_GPIO_CNTL, &enable);
- if (enable & ICH4_GPIO_EN) {
+ if (enable & ICH6_GPIO_EN) {
pci_read_config_dword(dev, ICH6_GPIOBASE, ®ion);
region &= PCI_BASE_ADDRESS_IO_MASK;
if (region >= PCIBIOS_MIN_IO)
/* ICH7-10 has the same common LPC generic IO decode registers */
static void __devinit quirk_ich7_lpc(struct pci_dev *dev)
{
- /* We share the common ACPI/DPIO decode with ICH6 */
+ /* We share the common ACPI/GPIO decode with ICH6 */
ich6_lpc_acpi_gpio(dev);
/* And have 4 ICH7+ generic decodes */
*/
static void __devinit nvenet_msi_disable(struct pci_dev *dev)
{
- if (dmi_name_in_vendors("P5N32-SLI PREMIUM") ||
- dmi_name_in_vendors("P5N32-E SLI")) {
+ const char *board_name = dmi_get_system_info(DMI_BOARD_NAME);
+
+ if (board_name &&
+ (strstr(board_name, "P5N32-SLI PREMIUM") ||
+ strstr(board_name, "P5N32-E SLI"))) {
dev_info(&dev->dev,
"Disabling msi for MCP55 NIC on P5N32-SLI\n");
dev->no_msi = 1;
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x3c28, vtd_mask_spec_errors);
#endif
+static void __devinit fixup_ti816x_class(struct pci_dev* dev)
+{
+ /* TI 816x devices do not have class code set when in PCIe boot mode */
+ if (dev->class == PCI_CLASS_NOT_DEFINED) {
+ dev_info(&dev->dev, "Setting PCI class for 816x PCIe device\n");
+ dev->class = PCI_CLASS_MULTIMEDIA_VIDEO;
+ }
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_TI, 0xb800, fixup_ti816x_class);
+
static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f,
struct pci_fixup *end)
{
return;
pci_remove_legacy_files(pci_bus);
- device_remove_file(&pci_bus->dev, &dev_attr_cpuaffinity);
- device_remove_file(&pci_bus->dev, &dev_attr_cpulistaffinity);
device_unregister(&pci_bus->dev);
}
EXPORT_SYMBOL(pci_remove_bus);
}
}
+static int __init pci_bus_get_depth(struct pci_bus *bus)
+{
+ int depth = 0;
+ struct pci_dev *dev;
+
+ list_for_each_entry(dev, &bus->devices, bus_list) {
+ int ret;
+ struct pci_bus *b = dev->subordinate;
+ if (!b)
+ continue;
+
+ ret = pci_bus_get_depth(b);
+ if (ret + 1 > depth)
+ depth = ret + 1;
+ }
+
+ return depth;
+}
+static int __init pci_get_max_depth(void)
+{
+ int depth = 0;
+ struct pci_bus *bus;
+
+ list_for_each_entry(bus, &pci_root_buses, node) {
+ int ret;
+
+ ret = pci_bus_get_depth(bus);
+ if (ret > depth)
+ depth = ret;
+ }
+
+ return depth;
+}
+
+/*
+ * first try will not touch pci bridge res
+ * second and later try will clear small leaf bridge res
+ * will stop till to the max deepth if can not find good one
+ */
void __init
pci_assign_unassigned_resources(void)
{
struct pci_bus *bus;
struct resource_list_x add_list; /* list of resources that
want additional resources */
+ int tried_times = 0;
+ enum release_type rel_type = leaf_only;
+ struct resource_list_x head, *list;
+ unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM |
+ IORESOURCE_PREFETCH;
+ unsigned long failed_type;
+ int max_depth = pci_get_max_depth();
+ int pci_try_num;
+
+
+ head.next = NULL;
add_list.next = NULL;
+
+ pci_try_num = max_depth + 1;
+ printk(KERN_DEBUG "PCI: max bus depth: %d pci_try_num: %d\n",
+ max_depth, pci_try_num);
+
+again:
/* Depth first, calculate sizes and alignments of all
subordinate buses. */
- list_for_each_entry(bus, &pci_root_buses, node) {
+ list_for_each_entry(bus, &pci_root_buses, node)
__pci_bus_size_bridges(bus, &add_list);
- }
/* Depth last, allocate resources and update the hardware. */
- list_for_each_entry(bus, &pci_root_buses, node) {
- __pci_bus_assign_resources(bus, &add_list, NULL);
- pci_enable_bridges(bus);
- }
+ list_for_each_entry(bus, &pci_root_buses, node)
+ __pci_bus_assign_resources(bus, &add_list, &head);
BUG_ON(add_list.next);
+ tried_times++;
+
+ /* any device complain? */
+ if (!head.next)
+ goto enable_and_dump;
+ failed_type = 0;
+ for (list = head.next; list;) {
+ failed_type |= list->flags;
+ list = list->next;
+ }
+ /*
+ * io port are tight, don't try extra
+ * or if reach the limit, don't want to try more
+ */
+ failed_type &= type_mask;
+ if ((failed_type == IORESOURCE_IO) || (tried_times >= pci_try_num)) {
+ free_list(resource_list_x, &head);
+ goto enable_and_dump;
+ }
+
+ printk(KERN_DEBUG "PCI: No. %d try to assign unassigned res\n",
+ tried_times + 1);
+
+ /* third times and later will not check if it is leaf */
+ if ((tried_times + 1) > 2)
+ rel_type = whole_subtree;
+
+ /*
+ * Try to release leaf bridge's resources that doesn't fit resource of
+ * child device under that bridge
+ */
+ for (list = head.next; list;) {
+ bus = list->dev->bus;
+ pci_bus_release_bridge_resources(bus, list->flags & type_mask,
+ rel_type);
+ list = list->next;
+ }
+ /* restore size and flags */
+ for (list = head.next; list;) {
+ struct resource *res = list->res;
+
+ res->start = list->start;
+ res->end = list->end;
+ res->flags = list->flags;
+ if (list->dev->subordinate)
+ res->flags = 0;
+
+ list = list->next;
+ }
+ free_list(resource_list_x, &head);
+
+ goto again;
+
+enable_and_dump:
+ /* Depth last, update the hardware. */
+ list_for_each_entry(bus, &pci_root_buses, node)
+ pci_enable_bridges(bus);
/* dump the resource on buses */
- list_for_each_entry(bus, &pci_root_buses, node) {
+ list_for_each_entry(bus, &pci_root_buses, node)
pci_bus_dump_resources(bus);
- }
}
void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge)
struct kvm *kvm;
spinlock_t intx_lock;
char irq_name[32];
+ struct pci_saved_state *pci_saved_state;
};
struct kvm_irq_mask_notifier {
extern void pcie_aspm_pm_state_change(struct pci_dev *pdev);
extern void pcie_aspm_powersave_config_link(struct pci_dev *pdev);
extern void pci_disable_link_state(struct pci_dev *pdev, int state);
+extern void pci_disable_link_state_locked(struct pci_dev *pdev, int state);
extern void pcie_clear_aspm(void);
extern void pcie_no_aspm(void);
#else
PCI_SPEED_UNKNOWN = 0xff,
};
-struct pci_cap_saved_state {
- struct hlist_node next;
+struct pci_cap_saved_data {
char cap_nr;
+ unsigned int size;
u32 data[0];
};
+struct pci_cap_saved_state {
+ struct hlist_node next;
+ struct pci_cap_saved_data cap;
+};
+
struct pcie_link_state;
struct pci_vpd;
struct pci_sriov;
struct hlist_node *pos;
hlist_for_each_entry(tmp, pos, &pci_dev->saved_cap_space, next) {
- if (tmp->cap_nr == cap)
+ if (tmp->cap.cap_nr == cap)
return tmp;
}
return NULL;
/* Power management related routines */
int pci_save_state(struct pci_dev *dev);
void pci_restore_state(struct pci_dev *dev);
+struct pci_saved_state *pci_store_saved_state(struct pci_dev *dev);
+int pci_load_saved_state(struct pci_dev *dev, struct pci_saved_state *state);
+int pci_load_and_free_saved_state(struct pci_dev *dev,
+ struct pci_saved_state **state);
int __pci_complete_power_transition(struct pci_dev *dev, pci_power_t state);
int pci_set_power_state(struct pci_dev *dev, pci_power_t state);
pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state);
return __pci_enable_wake(dev, state, false, enable);
}
+#define PCI_EXP_IDO_REQUEST (1<<0)
+#define PCI_EXP_IDO_COMPLETION (1<<1)
+void pci_enable_ido(struct pci_dev *dev, unsigned long type);
+void pci_disable_ido(struct pci_dev *dev, unsigned long type);
+
+enum pci_obff_signal_type {
+ PCI_EXP_OBFF_SIGNAL_L0,
+ PCI_EXP_OBFF_SIGNAL_ALWAYS,
+};
+int pci_enable_obff(struct pci_dev *dev, enum pci_obff_signal_type);
+void pci_disable_obff(struct pci_dev *dev);
+
+bool pci_ltr_supported(struct pci_dev *dev);
+int pci_enable_ltr(struct pci_dev *dev);
+void pci_disable_ltr(struct pci_dev *dev);
+int pci_set_ltr(struct pci_dev *dev, int snoop_lat_ns, int nosnoop_lat_ns);
+
/* For use by arch with custom probe code */
void set_pcie_port_type(struct pci_dev *pdev);
void set_pcie_hotplug_bridge(struct pci_dev *pdev);
return 0;
}
+static inline void pci_enable_ido(struct pci_dev *dev, unsigned long type)
+{
+}
+
+static inline void pci_disable_ido(struct pci_dev *dev, unsigned long type)
+{
+}
+
+static inline int pci_enable_obff(struct pci_dev *dev, unsigned long type)
+{
+ return 0;
+}
+
+static inline void pci_disable_obff(struct pci_dev *dev)
+{
+}
+
static inline int pci_request_regions(struct pci_dev *dev, const char *res_name)
{
return -EIO;
#define PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MAX 0x1c5f
#define PCI_DEVICE_ID_INTEL_PATSBURG_LPC_0 0x1d40
#define PCI_DEVICE_ID_INTEL_PATSBURG_LPC_1 0x1d41
+#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MIN 0x1e40
+#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MAX 0x1e5f
#define PCI_DEVICE_ID_INTEL_DH89XXCC_LPC_MIN 0x2310
#define PCI_DEVICE_ID_INTEL_DH89XXCC_LPC_MAX 0x231f
#define PCI_DEVICE_ID_INTEL_82801AA_0 0x2410
#define PCI_EXP_RTSTA_PENDING 0x20000 /* PME pending */
#define PCI_EXP_DEVCAP2 36 /* Device Capabilities 2 */
#define PCI_EXP_DEVCAP2_ARI 0x20 /* Alternative Routing-ID */
+#define PCI_EXP_DEVCAP2_LTR 0x800 /* Latency tolerance reporting */
+#define PCI_EXP_OBFF_MASK 0xc0000 /* OBFF support mechanism */
+#define PCI_EXP_OBFF_MSG 0x40000 /* New message signaling */
+#define PCI_EXP_OBFF_WAKE 0x80000 /* Re-use WAKE# for OBFF */
#define PCI_EXP_DEVCTL2 40 /* Device Control 2 */
#define PCI_EXP_DEVCTL2_ARI 0x20 /* Alternative Routing-ID */
+#define PCI_EXP_IDO_REQ_EN 0x100 /* ID-based ordering request enable */
+#define PCI_EXP_IDO_CMP_EN 0x200 /* ID-based ordering completion enable */
+#define PCI_EXP_LTR_EN 0x400 /* Latency tolerance reporting */
+#define PCI_EXP_OBFF_MSGA_EN 0x2000 /* OBFF enable with Message type A */
+#define PCI_EXP_OBFF_MSGB_EN 0x4000 /* OBFF enable with Message type B */
+#define PCI_EXP_OBFF_WAKE_EN 0x6000 /* OBFF using WAKE# signaling */
#define PCI_EXP_LNKCTL2 48 /* Link Control 2 */
#define PCI_EXP_SLTCTL2 56 /* Slot Control 2 */
#define PCI_EXT_CAP_ID_ARI 14
#define PCI_EXT_CAP_ID_ATS 15
#define PCI_EXT_CAP_ID_SRIOV 16
+#define PCI_EXT_CAP_ID_LTR 24
/* Advanced Error Reporting */
#define PCI_ERR_UNCOR_STATUS 4 /* Uncorrectable Error Status */
#define PCI_SRIOV_VFM_MO 0x2 /* Active.MigrateOut */
#define PCI_SRIOV_VFM_AV 0x3 /* Active.Available */
+#define PCI_LTR_MAX_SNOOP_LAT 0x4
+#define PCI_LTR_MAX_NOSNOOP_LAT 0x6
+#define PCI_LTR_VALUE_MASK 0x000003ff
+#define PCI_LTR_SCALE_MASK 0x00001c00
+#define PCI_LTR_SCALE_SHIFT 10
+
/* Access Control Service */
#define PCI_ACS_CAP 0x04 /* ACS Capability Register */
#define PCI_ACS_SV 0x01 /* Source Validation */
{
kvm_free_assigned_irq(kvm, assigned_dev);
- __pci_reset_function(assigned_dev->dev);
- pci_restore_state(assigned_dev->dev);
+ pci_reset_function(assigned_dev->dev);
+ if (pci_load_and_free_saved_state(assigned_dev->dev,
+ &assigned_dev->pci_saved_state))
+ printk(KERN_INFO "%s: Couldn't reload %s saved state\n",
+ __func__, dev_name(&assigned_dev->dev->dev));
+ else
+ pci_restore_state(assigned_dev->dev);
pci_release_regions(assigned_dev->dev);
pci_disable_device(assigned_dev->dev);
pci_reset_function(dev);
pci_save_state(dev);
-
+ match->pci_saved_state = pci_store_saved_state(dev);
+ if (!match->pci_saved_state)
+ printk(KERN_DEBUG "%s: Couldn't store %s saved state\n",
+ __func__, dev_name(&dev->dev));
match->assigned_dev_id = assigned_dev->assigned_dev_id;
match->host_segnr = assigned_dev->segnr;
match->host_busnr = assigned_dev->busnr;
mutex_unlock(&kvm->lock);
return r;
out_list_del:
- pci_restore_state(dev);
+ if (pci_load_and_free_saved_state(dev, &match->pci_saved_state))
+ printk(KERN_INFO "%s: Couldn't reload %s saved state\n",
+ __func__, dev_name(&dev->dev));
list_del(&match->list);
pci_release_regions(dev);
out_disable:
git.openpandora.org / pandora-kernel.git / commitdiff