* 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6:
staging: Remove a warning for drivers/staging/wlan-ng/cfg80211.c
staging: intel_sst: intelmid needs delay.h
staging: solo6x10: add select SND_PCM to fix build error
staging: usbip: vhci: fix oops on subsequent attach
staging: ft1000: Remove unnecessary EXPORT_SYMBOLs
staging: rts_pstor: use #ifdef instead of #if
staging: rts_pstor: Add <linux/vmalloc.h>
staging: gma500: Depend on X86
staging: olpc: Add <linux/delay.h>
free_netdev(dev);
return NULL;
}
-
-EXPORT_SYMBOL(init_ft1000_card);
-EXPORT_SYMBOL(stop_ft1000_card);
-EXPORT_SYMBOL(flarion_ft1000_cnt);
remove_proc_entry(FT1000_PROC, init_net.proc_net);
unregister_netdevice_notifier(&ft1000_netdev_notifier);
}
-
-EXPORT_SYMBOL(ft1000InitProc);
-EXPORT_SYMBOL(ft1000CleanupProc);
config DRM_PSB
tristate "Intel GMA500 KMS Framebuffer"
- depends on DRM && PCI
+ depends on DRM && PCI && X86
select FB_CFB_COPYAREA
select FB_CFB_FILLRECT
select FB_CFB_IMAGEBLIT
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/pci.h>
+#include <linux/delay.h>
#include <linux/file.h>
#include <asm/mrst.h>
#include <sound/pcm.h>
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/pci.h>
+#include <linux/delay.h>
#include <linux/file.h>
#include "intel_sst.h"
#include "intelmid_snd_control.h"
*/
#include <linux/cs5535.h>
#include <linux/gpio.h>
+#include <linux/delay.h>
#include <asm/olpc.h>
#include "olpc_dcon.h"
#define RTSX_STOR "rts_pstor: "
-#if CONFIG_RTS_PSTOR_DEBUG
+#ifdef CONFIG_RTS_PSTOR_DEBUG
#define RTSX_DEBUGP(x...) printk(KERN_DEBUG RTSX_STOR x)
#define RTSX_DEBUGPN(x...) printk(KERN_DEBUG x)
#define RTSX_DEBUGPX(x...) printk(x)
#include <linux/blkdev.h>
#include <linux/kthread.h>
#include <linux/sched.h>
+#include <linux/vmalloc.h>
#include "rtsx.h"
#include "rtsx_transport.h"
#include <linux/kthread.h>
#include <linux/sched.h>
#include <linux/workqueue.h>
+#include <linux/vmalloc.h>
#include "rtsx.h"
#include "rtsx_transport.h"
#ifdef SUPPORT_OCP
if (CHECK_LUN_MODE(chip, SD_MS_2LUN)) {
- #if CONFIG_RTS_PSTOR_DEBUG
+#ifdef CONFIG_RTS_PSTOR_DEBUG
if (chip->ocp_stat & (SD_OC_NOW | SD_OC_EVER | MS_OC_NOW | MS_OC_EVER)) {
RTSX_DEBUGP("Over current, OCPSTAT is 0x%x\n", chip->ocp_stat);
}
- #endif
+#endif
if (chip->ocp_stat & (SD_OC_NOW | SD_OC_EVER)) {
if (chip->card_exist & SD_CARD) {
#include <linux/blkdev.h>
#include <linux/kthread.h>
#include <linux/sched.h>
+#include <linux/vmalloc.h>
#include "rtsx.h"
#include "rtsx_transport.h"
RTSX_WRITE_REG(chip, SD_VPCLK0_CTL, PHASE_NOT_RESET, PHASE_NOT_RESET);
RTSX_WRITE_REG(chip, CLK_CTL, CHANGE_CLK, 0);
} else {
-#if CONFIG_RTS_PSTOR_DEBUG
+#ifdef CONFIG_RTS_PSTOR_DEBUG
rtsx_read_register(chip, SD_VP_CTL, &val);
RTSX_DEBUGP("SD_VP_CTL: 0x%x\n", val);
rtsx_read_register(chip, SD_DCMPS_CTL, &val);
return STATUS_SUCCESS;
Fail:
-#if CONFIG_RTS_PSTOR_DEBUG
+#ifdef CONFIG_RTS_PSTOR_DEBUG
rtsx_read_register(chip, SD_VP_CTL, &val);
RTSX_DEBUGP("SD_VP_CTL: 0x%x\n", val);
rtsx_read_register(chip, SD_DCMPS_CTL, &val);
#define TRACE_GOTO(chip, label) goto label
#endif
-#if CONFIG_RTS_PSTOR_DEBUG
+#ifdef CONFIG_RTS_PSTOR_DEBUG
static inline void rtsx_dump(u8 *buf, int buf_len)
{
int i;
#include <linux/blkdev.h>
#include <linux/kthread.h>
#include <linux/sched.h>
+#include <linux/vmalloc.h>
#include "rtsx.h"
#include "rtsx_transport.h"
tristate "Softlogic 6x10 MPEG codec cards"
depends on PCI && VIDEO_DEV && SND && I2C
select VIDEOBUF_DMA_SG
+ select SND_PCM
---help---
This driver supports the Softlogic based MPEG-4 and h.264 codec
codec cards.
}
/* kill threads related to this sdev, if v.c. exists */
- kthread_stop(vdev->ud.tcp_rx);
- kthread_stop(vdev->ud.tcp_tx);
+ if (vdev->ud.tcp_rx)
+ kthread_stop(vdev->ud.tcp_rx);
+ if (vdev->ud.tcp_tx)
+ kthread_stop(vdev->ud.tcp_tx);
usbip_uinfo("stop threads\n");
{
memset(vdev, 0, sizeof(*vdev));
- vdev->ud.tcp_rx = kthread_create(vhci_rx_loop, &vdev->ud, "vhci_rx");
- vdev->ud.tcp_tx = kthread_create(vhci_tx_loop, &vdev->ud, "vhci_tx");
-
vdev->ud.side = USBIP_VHCI;
vdev->ud.status = VDEV_ST_NULL;
/* vdev->ud.lock = SPIN_LOCK_UNLOCKED; */
#include "vhci.h"
#include <linux/in.h>
+#include <linux/kthread.h>
/* TODO: refine locking ?*/
vdev->ud.tcp_socket = socket;
vdev->ud.status = VDEV_ST_NOTASSIGNED;
- wake_up_process(vdev->ud.tcp_rx);
- wake_up_process(vdev->ud.tcp_tx);
-
spin_unlock(&vdev->ud.lock);
spin_unlock(&the_controller->lock);
/* end the lock */
+ vdev->ud.tcp_rx = kthread_run(vhci_rx_loop, &vdev->ud, "vhci_rx");
+ vdev->ud.tcp_tx = kthread_run(vhci_tx_loop, &vdev->ud, "vhci_tx");
+
rh_port_connect(rhport, speed);
return count;
}
int prism2_set_default_key(struct wiphy *wiphy, struct net_device *dev,
- u8 key_index)
+ u8 key_index, bool unicast, bool multicast)
{
wlandevice_t *wlandev = dev->ml_priv;