r6040: Move the RDC driver

Move the RDC driver into drivers/net/ethernet/rdc/ and make the
necessary Kconfig and Makefile changes.

CC: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

diff --git a/MAINTAINERS b/MAINTAINERS
index ae60f8c..ca3ec84 100644 (file)
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5343,7 +5343,7 @@ RDC R6040 FAST ETHERNET DRIVER
 M:     Florian Fainelli <florian@openwrt.org>
 L:     netdev@vger.kernel.org
 S:     Maintained
-F:     drivers/net/r6040.c
+F:     drivers/net/ethernet/rdc/r6040.c
 
 RDS - RELIABLE DATAGRAM SOCKETS
 M:     Andy Grover <andy.grover@oracle.com>

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 3f6622c..ca3afb5 100644 (file)
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -379,19 +379,6 @@ config FEALNX
          Say Y here to support the Myson MTD-800 family of PCI-based Ethernet 
          cards. <http://www.myson.com.tw/>
 
-config R6040
-       tristate "RDC R6040 Fast Ethernet Adapter support"
-       depends on NET_PCI && PCI
-       select CRC32
-       select MII
-       select PHYLIB
-       help
-         This is a driver for the R6040 Fast Ethernet MACs found in the
-         the RDC R-321x System-on-chips.
-
-         To compile this driver as a module, choose M here: the module
-         will be called r6040. This is recommended.
-
 config NET_POCKET
        bool "Pocket and portable adapters"
        depends on PARPORT

diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index d7873ba..051439f 100644 (file)
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -16,7 +16,6 @@ obj-$(CONFIG_PLIP) += plip.o
 
 obj-$(CONFIG_ROADRUNNER) += rrunner.o
 
-obj-$(CONFIG_R6040) += r6040.o
 obj-$(CONFIG_FEALNX) += fealnx.o
 obj-$(CONFIG_SKFP) += skfp/
 obj-$(CONFIG_ADAPTEC_STARFIRE) += starfire.o

diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 68a31b9..78e567f 100644 (file)
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -83,6 +83,7 @@ source "drivers/net/ethernet/pasemi/Kconfig"
 source "drivers/net/ethernet/qlogic/Kconfig"
 source "drivers/net/ethernet/racal/Kconfig"
 source "drivers/net/ethernet/realtek/Kconfig"
+source "drivers/net/ethernet/rdc/Kconfig"
 
 config S6GMAC
        tristate "S6105 GMAC ethernet support"

diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 0e91c4d..48d3209 100644 (file)
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -43,6 +43,7 @@ obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/
 obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
 obj-$(CONFIG_NET_VENDOR_RACAL) += racal/
 obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/
+obj-$(CONFIG_NET_VENDOR_RDC) += rdc/
 obj-$(CONFIG_S6GMAC) += s6gmac.o
 obj-$(CONFIG_NET_VENDOR_SEEQ) += seeq/
 obj-$(CONFIG_NET_VENDOR_SIS) += sis/

diff --git a/drivers/net/ethernet/rdc/Kconfig b/drivers/net/ethernet/rdc/Kconfig
new file mode 100644 (file)
index 0000000..b15ebac
--- /dev/null
+++ b/drivers/net/ethernet/rdc/Kconfig
@@ -0,0 +1,33 @@
+#
+# RDC network device configuration
+#
+
+config NET_VENDOR_RDC
+       bool "RDC devices"
+       depends on PCI
+       ---help---
+         If you have a network (Ethernet) card belonging to this class, say Y
+         and read the Ethernet-HOWTO, available from
+         <http://www.tldp.org/docs.html#howto>.
+
+         Note that the answer to this question doesn't directly affect the
+         kernel: saying N will just cause the configurator to skip all
+         the questions about RDC cards. If you say Y, you will be asked for
+         your specific card in the following questions.
+
+if NET_VENDOR_RDC
+
+config R6040
+       tristate "RDC R6040 Fast Ethernet Adapter support"
+       depends on PCI
+       select CRC32
+       select MII
+       select PHYLIB
+       ---help---
+         This is a driver for the R6040 Fast Ethernet MACs found in the
+         the RDC R-321x System-on-chips.
+
+         To compile this driver as a module, choose M here: the module
+         will be called r6040. This is recommended.
+
+endif # NET_VENDOR_RDC

diff --git a/drivers/net/ethernet/rdc/Makefile b/drivers/net/ethernet/rdc/Makefile
new file mode 100644 (file)
index 0000000..8d51fd2
--- /dev/null
+++ b/drivers/net/ethernet/rdc/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the RDC network device drivers.
+#
+
+obj-$(CONFIG_R6040) += r6040.o

diff --git a/drivers/net/r6040.c b/drivers/net/ethernet/rdc/r6040.c
similarity index 100%
rename from drivers/net/r6040.c
rename to drivers/net/ethernet/rdc/r6040.c