* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6:
[media] tuner-core: fix a 2.6.39 regression with mt20xx
[media] dvb_frontend: fix race condition in stopping/starting frontend
[media] media: fix radio-sf16fmr2 build when SND is not enabled
[media] MEDIA: Fix non-ISA_DMA_API link failure of sound code
[media] nuvoton-cir: make idle timeout more sane
[media] mceusb: increase default timeout to 100ms
[media] mceusb: Timeout unit corrections
[media] Revert "V4L/DVB: cx23885: Enable Message Signaled Interrupts(MSI)"
if (dvbdev->users == -1 && fe->ops.ts_bus_ctrl) {
if ((ret = fe->ops.ts_bus_ctrl(fe, 1)) < 0)
goto err0;
+
+ /* If we took control of the bus, we need to force
+ reinitialization. This is because many ts_bus_ctrl()
+ functions strobe the RESET pin on the demod, and if the
+ frontend thread already exists then the dvb_init() routine
+ won't get called (which is what usually does initial
+ register configuration). */
+ fepriv->reinitialise = 1;
}
if ((ret = dvb_generic_open (inode, file)) < 0)
config RADIO_MIROPCM20
tristate "miroSOUND PCM20 radio"
- depends on ISA && VIDEO_V4L2 && SND
+ depends on ISA && ISA_DMA_API && VIDEO_V4L2 && SND
select SND_ISA
select SND_MIRO
---help---
config RADIO_SF16FMR2
tristate "SF16FMR2 Radio"
- depends on ISA && VIDEO_V4L2
+ depends on ISA && VIDEO_V4L2 && SND
---help---
Choose Y here if you have one of these FM radio cards.
inout, data1);
break;
case MCE_CMD_S_TIMEOUT:
- /* value is in units of 50us, so x*50/100 or x/2 ms */
+ /* value is in units of 50us, so x*50/1000 ms */
dev_info(dev, "%s receive timeout of %d ms\n",
- inout, ((data1 << 8) | data2) / 2);
+ inout,
+ ((data1 << 8) | data2) * MCE_TIME_UNIT / 1000);
break;
case MCE_CMD_G_TIMEOUT:
dev_info(dev, "Get receive timeout\n");
switch (ir->buf_in[index]) {
/* 2-byte return value commands */
case MCE_CMD_S_TIMEOUT:
- ir->rc->timeout = US_TO_NS((hi << 8 | lo) / 2);
+ ir->rc->timeout = US_TO_NS((hi << 8 | lo) * MCE_TIME_UNIT);
break;
/* 1-byte return value commands */
rc->priv = ir;
rc->driver_type = RC_DRIVER_IR_RAW;
rc->allowed_protos = RC_TYPE_ALL;
- rc->timeout = US_TO_NS(1000);
+ rc->timeout = MS_TO_NS(100);
if (!ir->flags.no_tx) {
rc->s_tx_mask = mceusb_set_tx_mask;
rc->s_tx_carrier = mceusb_set_tx_carrier;
rdev->dev.parent = &pdev->dev;
rdev->driver_name = NVT_DRIVER_NAME;
rdev->map_name = RC_MAP_RC6_MCE;
- rdev->timeout = US_TO_NS(1000);
+ rdev->timeout = MS_TO_NS(100);
/* rx resolution is hardwired to 50us atm, 1, 25, 100 also possible */
rdev->rx_resolution = US_TO_NS(CIR_SAMPLE_PERIOD);
#if 0
goto fail_irq;
}
- if (!pci_enable_msi(pci_dev))
- err = request_irq(pci_dev->irq, cx23885_irq,
- IRQF_DISABLED, dev->name, dev);
- else
- err = request_irq(pci_dev->irq, cx23885_irq,
- IRQF_SHARED | IRQF_DISABLED, dev->name, dev);
+ err = request_irq(pci_dev->irq, cx23885_irq,
+ IRQF_SHARED | IRQF_DISABLED, dev->name, dev);
if (err < 0) {
printk(KERN_ERR "%s: can't get IRQ %d\n",
dev->name, pci_dev->irq);
/* unregister stuff */
free_irq(pci_dev->irq, dev);
- pci_disable_msi(pci_dev);
cx23885_dev_unregister(dev);
v4l2_device_unregister(v4l2_dev);
* returns 0.
* This function is needed for boards that have a separate tuner for
* radio (like devices with tea5767).
+ * NOTE: mt20xx uses V4L2_TUNER_DIGITAL_TV and calls set_tv_freq to
+ * select a TV frequency. So, t_mode = T_ANALOG_TV could actually
+ * be used to represent a Digital TV too.
*/
static inline int check_mode(struct tuner *t, enum v4l2_tuner_type mode)
{
- if ((1 << mode & t->mode_mask) == 0)
+ int t_mode;
+ if (mode == V4L2_TUNER_RADIO)
+ t_mode = T_RADIO;
+ else
+ t_mode = T_ANALOG_TV;
+
+ if ((t_mode & t->mode_mask) == 0)
return -EINVAL;
return 0;
case V4L2_TUNER_RADIO:
p = "radio";
break;
- case V4L2_TUNER_DIGITAL_TV:
+ case V4L2_TUNER_DIGITAL_TV: /* Used by mt20xx */
p = "digital TV";
break;
case V4L2_TUNER_ANALOG_TV:
return 0;
if (vt->type == t->mode && analog_ops->get_afc)
vt->afc = analog_ops->get_afc(&t->fe);
- if (vt->type == V4L2_TUNER_ANALOG_TV)
+ if (t->mode != V4L2_TUNER_RADIO) {
vt->capability |= V4L2_TUNER_CAP_NORM;
- if (vt->type != V4L2_TUNER_RADIO) {
vt->rangelow = tv_range[0] * 16;
vt->rangehigh = tv_range[1] * 16;
return 0;