mdio: Add register definitions for MDIO (clause 45)

IEEE 802.3 clause 45 specifies the MDIO interface and registers for
use in 10G and other PHYs, similar to the MII management interface.

PHYs may have up to 32 MMDs corresponding to different sub-layers and
functions, each with up to 65536 registers.  These are addressed by
PRTAD (similar to the MII PHY address) and DEVAD.  Define a mapping
for specifying PRTAD and DEVAD through the existing MII ioctls.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/include/linux/mdio.h b/include/linux/mdio.h
new file mode 100644 (file)
index 0000000..d57ddb0
--- /dev/null
+++ b/include/linux/mdio.h
@@ -0,0 +1,237 @@
+/*
+ * linux/mdio.h: definitions for MDIO (clause 45) transceivers
+ * Copyright 2006-2009 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#ifndef __LINUX_MDIO_H__
+#define __LINUX_MDIO_H__
+
+#include <linux/mii.h>
+
+/* MDIO Manageable Devices (MMDs). */
+#define MDIO_MMD_PMAPMD                1       /* Physical Medium Attachment/
+                                        * Physical Medium Dependent */
+#define MDIO_MMD_WIS           2       /* WAN Interface Sublayer */
+#define MDIO_MMD_PCS           3       /* Physical Coding Sublayer */
+#define MDIO_MMD_PHYXS         4       /* PHY Extender Sublayer */
+#define MDIO_MMD_DTEXS         5       /* DTE Extender Sublayer */
+#define MDIO_MMD_TC            6       /* Transmission Convergence */
+#define MDIO_MMD_AN            7       /* Auto-Negotiation */
+#define MDIO_MMD_C22EXT                29      /* Clause 22 extension */
+#define MDIO_MMD_VEND1         30      /* Vendor specific 1 */
+#define MDIO_MMD_VEND2         31      /* Vendor specific 2 */
+
+/* Generic MDIO registers. */
+#define MDIO_CTRL1             MII_BMCR
+#define MDIO_STAT1             MII_BMSR
+#define MDIO_DEVID1            MII_PHYSID1
+#define MDIO_DEVID2            MII_PHYSID2
+#define MDIO_SPEED             4       /* Speed ability */
+#define MDIO_DEVS1             5       /* Devices in package */
+#define MDIO_DEVS2             6
+#define MDIO_CTRL2             7       /* 10G control 2 */
+#define MDIO_STAT2             8       /* 10G status 2 */
+#define MDIO_PMA_TXDIS         9       /* 10G PMA/PMD transmit disable */
+#define MDIO_PMA_RXDET         10      /* 10G PMA/PMD receive signal detect */
+#define MDIO_PMA_EXTABLE       11      /* 10G PMA/PMD extended ability */
+#define MDIO_PKGID1            14      /* Package identifier */
+#define MDIO_PKGID2            15
+#define MDIO_AN_ADVERTISE      16      /* AN advertising (base page) */
+#define MDIO_AN_LPA            19      /* AN LP abilities (base page) */
+#define MDIO_PHYXS_LNSTAT      24      /* PHY XGXS lane state */
+
+/* Media-dependent registers. */
+#define MDIO_PMA_10GBT_TXPWR   131     /* 10GBASE-T TX power control */
+#define MDIO_PCS_10GBX_STAT1   24      /* 10GBASE-X PCS status 1 */
+#define MDIO_PCS_10GBRT_STAT1  32      /* 10GBASE-R/-T PCS status 1 */
+#define MDIO_PCS_10GBRT_STAT2  33      /* 10GBASE-R/-T PCS status 2 */
+#define MDIO_AN_10GBT_CTRL     32      /* 10GBASE-T auto-negotiation control */
+#define MDIO_AN_10GBT_STAT     33      /* 10GBASE-T auto-negotiation status */
+
+/* Control register 1. */
+/* Enable extended speed selection */
+#define MDIO_CTRL1_SPEEDSELEXT         (BMCR_SPEED1000 | BMCR_SPEED100)
+/* All speed selection bits */
+#define MDIO_CTRL1_SPEEDSEL            (MDIO_CTRL1_SPEEDSELEXT | 0x003c)
+#define MDIO_CTRL1_FULLDPLX            BMCR_FULLDPLX
+#define MDIO_CTRL1_LPOWER              BMCR_PDOWN
+#define MDIO_CTRL1_RESET               BMCR_RESET
+#define MDIO_PMA_CTRL1_LOOPBACK                0x0001
+#define MDIO_PMA_CTRL1_SPEED1000       BMCR_SPEED1000
+#define MDIO_PMA_CTRL1_SPEED100                BMCR_SPEED100
+#define MDIO_PCS_CTRL1_LOOPBACK                BMCR_LOOPBACK
+#define MDIO_PHYXS_CTRL1_LOOPBACK      BMCR_LOOPBACK
+#define MDIO_AN_CTRL1_RESTART          BMCR_ANRESTART
+#define MDIO_AN_CTRL1_ENABLE           BMCR_ANENABLE
+#define MDIO_AN_CTRL1_XNP              0x2000  /* Enable extended next page */
+
+/* 10 Gb/s */
+#define MDIO_CTRL1_SPEED10G            (MDIO_CTRL1_SPEEDSELEXT | 0x00)
+/* 10PASS-TS/2BASE-TL */
+#define MDIO_CTRL1_SPEED10P2B          (MDIO_CTRL1_SPEEDSELEXT | 0x04)
+
+/* Status register 1. */
+#define MDIO_STAT1_LPOWERABLE          0x0002  /* Low-power ability */
+#define MDIO_STAT1_LSTATUS             BMSR_LSTATUS
+#define MDIO_STAT1_FAULT               0x0080  /* Fault */
+#define MDIO_AN_STAT1_LPABLE           0x0001  /* Link partner AN ability */
+#define MDIO_AN_STAT1_ABLE             BMSR_ANEGCAPABLE
+#define MDIO_AN_STAT1_RFAULT           BMSR_RFAULT
+#define MDIO_AN_STAT1_COMPLETE         BMSR_ANEGCOMPLETE
+#define MDIO_AN_STAT1_PAGE             0x0040  /* Page received */
+#define MDIO_AN_STAT1_XNP              0x0080  /* Extended next page status */
+
+/* Speed register. */
+#define MDIO_SPEED_10G                 0x0001  /* 10G capable */
+#define MDIO_PMA_SPEED_2B              0x0002  /* 2BASE-TL capable */
+#define MDIO_PMA_SPEED_10P             0x0004  /* 10PASS-TS capable */
+#define MDIO_PMA_SPEED_1000            0x0010  /* 1000M capable */
+#define MDIO_PMA_SPEED_100             0x0020  /* 100M capable */
+#define MDIO_PMA_SPEED_10              0x0040  /* 10M capable */
+#define MDIO_PCS_SPEED_10P2B           0x0002  /* 10PASS-TS/2BASE-TL capable */
+
+/* Device present registers. */
+#define MDIO_DEVS_PRESENT(devad)       (1 << (devad))
+#define MDIO_DEVS_PMAPMD               MDIO_DEVS_PRESENT(MDIO_MMD_PMAPMD)
+#define MDIO_DEVS_WIS                  MDIO_DEVS_PRESENT(MDIO_MMD_WIS)
+#define MDIO_DEVS_PCS                  MDIO_DEVS_PRESENT(MDIO_MMD_PCS)
+#define MDIO_DEVS_PHYXS                        MDIO_DEVS_PRESENT(MDIO_MMD_PHYXS)
+#define MDIO_DEVS_DTEXS                        MDIO_DEVS_PRESENT(MDIO_MMD_DTEXS)
+#define MDIO_DEVS_TC                   MDIO_DEVS_PRESENT(MDIO_MMD_TC)
+#define MDIO_DEVS_AN                   MDIO_DEVS_PRESENT(MDIO_MMD_AN)
+#define MDIO_DEVS_C22EXT               MDIO_DEVS_PRESENT(MDIO_MMD_C22EXT)
+
+/* Control register 2. */
+#define MDIO_PMA_CTRL2_TYPE            0x000f  /* PMA/PMD type selection */
+#define MDIO_PMA_CTRL2_10GBCX4         0x0000  /* 10GBASE-CX4 type */
+#define MDIO_PMA_CTRL2_10GBEW          0x0001  /* 10GBASE-EW type */
+#define MDIO_PMA_CTRL2_10GBLW          0x0002  /* 10GBASE-LW type */
+#define MDIO_PMA_CTRL2_10GBSW          0x0003  /* 10GBASE-SW type */
+#define MDIO_PMA_CTRL2_10GBLX4         0x0004  /* 10GBASE-LX4 type */
+#define MDIO_PMA_CTRL2_10GBER          0x0005  /* 10GBASE-ER type */
+#define MDIO_PMA_CTRL2_10GBLR          0x0006  /* 10GBASE-LR type */
+#define MDIO_PMA_CTRL2_10GBSR          0x0007  /* 10GBASE-SR type */
+#define MDIO_PMA_CTRL2_10GBLRM         0x0008  /* 10GBASE-LRM type */
+#define MDIO_PMA_CTRL2_10GBT           0x0009  /* 10GBASE-T type */
+#define MDIO_PMA_CTRL2_10GBKX4         0x000a  /* 10GBASE-KX4 type */
+#define MDIO_PMA_CTRL2_10GBKR          0x000b  /* 10GBASE-KR type */
+#define MDIO_PMA_CTRL2_1000BT          0x000c  /* 1000BASE-T type */
+#define MDIO_PMA_CTRL2_1000BKX         0x000d  /* 1000BASE-KX type */
+#define MDIO_PMA_CTRL2_100BTX          0x000e  /* 100BASE-TX type */
+#define MDIO_PMA_CTRL2_10BT            0x000f  /* 10BASE-T type */
+#define MDIO_PCS_CTRL2_TYPE            0x0003  /* PCS type selection */
+#define MDIO_PCS_CTRL2_10GBR           0x0000  /* 10GBASE-R type */
+#define MDIO_PCS_CTRL2_10GBX           0x0001  /* 10GBASE-X type */
+#define MDIO_PCS_CTRL2_10GBW           0x0002  /* 10GBASE-W type */
+#define MDIO_PCS_CTRL2_10GBT           0x0003  /* 10GBASE-T type */
+
+/* Status register 2. */
+#define MDIO_STAT2_RXFAULT             0x0400  /* Receive fault */
+#define MDIO_STAT2_TXFAULT             0x0800  /* Transmit fault */
+#define MDIO_STAT2_DEVPRST             0xc000  /* Device present */
+#define MDIO_STAT2_DEVPRST_VAL         0x8000  /* Device present value */
+#define MDIO_PMA_STAT2_LBABLE          0x0001  /* PMA loopback ability */
+#define MDIO_PMA_STAT2_10GBEW          0x0002  /* 10GBASE-EW ability */
+#define MDIO_PMA_STAT2_10GBLW          0x0004  /* 10GBASE-LW ability */
+#define MDIO_PMA_STAT2_10GBSW          0x0008  /* 10GBASE-SW ability */
+#define MDIO_PMA_STAT2_10GBLX4         0x0010  /* 10GBASE-LX4 ability */
+#define MDIO_PMA_STAT2_10GBER          0x0020  /* 10GBASE-ER ability */
+#define MDIO_PMA_STAT2_10GBLR          0x0040  /* 10GBASE-LR ability */
+#define MDIO_PMA_STAT2_10GBSR          0x0080  /* 10GBASE-SR ability */
+#define MDIO_PMD_STAT2_TXDISAB         0x0100  /* PMD TX disable ability */
+#define MDIO_PMA_STAT2_EXTABLE         0x0200  /* Extended abilities */
+#define MDIO_PMA_STAT2_RXFLTABLE       0x1000  /* Receive fault ability */
+#define MDIO_PMA_STAT2_TXFLTABLE       0x2000  /* Transmit fault ability */
+#define MDIO_PCS_STAT2_10GBR           0x0001  /* 10GBASE-R capable */
+#define MDIO_PCS_STAT2_10GBX           0x0002  /* 10GBASE-X capable */
+#define MDIO_PCS_STAT2_10GBW           0x0004  /* 10GBASE-W capable */
+#define MDIO_PCS_STAT2_RXFLTABLE       0x1000  /* Receive fault ability */
+#define MDIO_PCS_STAT2_TXFLTABLE       0x2000  /* Transmit fault ability */
+
+/* Transmit disable register. */
+#define MDIO_PMD_TXDIS_GLOBAL          0x0001  /* Global PMD TX disable */
+#define MDIO_PMD_TXDIS_0               0x0002  /* PMD TX disable 0 */
+#define MDIO_PMD_TXDIS_1               0x0004  /* PMD TX disable 1 */
+#define MDIO_PMD_TXDIS_2               0x0008  /* PMD TX disable 2 */
+#define MDIO_PMD_TXDIS_3               0x0010  /* PMD TX disable 3 */
+
+/* Receive signal detect register. */
+#define MDIO_PMD_RXDET_GLOBAL          0x0001  /* Global PMD RX signal detect */
+#define MDIO_PMD_RXDET_0               0x0002  /* PMD RX signal detect 0 */
+#define MDIO_PMD_RXDET_1               0x0004  /* PMD RX signal detect 1 */
+#define MDIO_PMD_RXDET_2               0x0008  /* PMD RX signal detect 2 */
+#define MDIO_PMD_RXDET_3               0x0010  /* PMD RX signal detect 3 */
+
+/* Extended abilities register. */
+#define MDIO_PMA_EXTABLE_10GCX4                0x0001  /* 10GBASE-CX4 ability */
+#define MDIO_PMA_EXTABLE_10GBLRM       0x0002  /* 10GBASE-LRM ability */
+#define MDIO_PMA_EXTABLE_10GBT         0x0004  /* 10GBASE-T ability */
+#define MDIO_PMA_EXTABLE_10GBKX4       0x0008  /* 10GBASE-KX4 ability */
+#define MDIO_PMA_EXTABLE_10GBKR                0x0010  /* 10GBASE-KR ability */
+#define MDIO_PMA_EXTABLE_1000BT                0x0020  /* 1000BASE-T ability */
+#define MDIO_PMA_EXTABLE_1000BKX       0x0040  /* 1000BASE-KX ability */
+#define MDIO_PMA_EXTABLE_100BTX                0x0080  /* 100BASE-TX ability */
+#define MDIO_PMA_EXTABLE_10BT          0x0100  /* 10BASE-T ability */
+
+/* PHY XGXS lane state register. */
+#define MDIO_PHYXS_LNSTAT_SYNC0                0x0001
+#define MDIO_PHYXS_LNSTAT_SYNC1                0x0002
+#define MDIO_PHYXS_LNSTAT_SYNC2                0x0004
+#define MDIO_PHYXS_LNSTAT_SYNC3                0x0008
+#define MDIO_PHYXS_LNSTAT_ALIGN                0x1000
+
+/* PMA 10GBASE-T TX power register. */
+#define MDIO_PMA_10GBT_TXPWR_SHORT     0x0001  /* Short-reach mode */
+
+/* PCS 10GBASE-R/-T status register 1. */
+#define MDIO_PCS_10GBRT_STAT1_BLKLK    0x0001  /* Block lock attained */
+
+/* PCS 10GBASE-R/-T status register 2. */
+#define MDIO_PCS_10GBRT_STAT2_ERR      0x00ff
+#define MDIO_PCS_10GBRT_STAT2_BER      0x3f00
+
+/* AN 10GBASE-T control register. */
+#define MDIO_AN_10GBT_CTRL_ADV10G      0x1000  /* Advertise 10GBASE-T */
+
+/* AN 10GBASE-T status register. */
+#define MDIO_AN_10GBT_STAT_LPTRR       0x0200  /* LP training reset req. */
+#define MDIO_AN_10GBT_STAT_LPLTABLE    0x0400  /* LP loop timing ability */
+#define MDIO_AN_10GBT_STAT_LP10G       0x0800  /* LP is 10GBT capable */
+#define MDIO_AN_10GBT_STAT_REMOK       0x1000  /* Remote OK */
+#define MDIO_AN_10GBT_STAT_LOCOK       0x2000  /* Local OK */
+#define MDIO_AN_10GBT_STAT_MS          0x4000  /* Master/slave config */
+#define MDIO_AN_10GBT_STAT_MSFLT       0x8000  /* Master/slave config fault */
+
+/* Mapping between MDIO PRTAD/DEVAD and mii_ioctl_data::phy_id */
+
+#define MDIO_PHY_ID_C45                        0x8000
+#define MDIO_PHY_ID_PRTAD              0x03e0
+#define MDIO_PHY_ID_DEVAD              0x001f
+#define MDIO_PHY_ID_C45_MASK                                           \
+       (MDIO_PHY_ID_C45 | MDIO_PHY_ID_PRTAD | MDIO_PHY_ID_DEVAD)
+
+static inline __u16 mdio_phy_id_c45(int prtad, int devad)
+{
+       return MDIO_PHY_ID_C45 | (prtad << 5) | devad;
+}
+
+static inline bool mdio_phy_id_is_c45(int phy_id)
+{
+       return (phy_id & MDIO_PHY_ID_C45) && !(phy_id & ~MDIO_PHY_ID_C45_MASK);
+}
+
+static inline __u16 mdio_phy_id_prtad(int phy_id)
+{
+       return (phy_id & MDIO_PHY_ID_PRTAD) >> 5;
+}
+
+static inline __u16 mdio_phy_id_devad(int phy_id)
+{
+       return phy_id & MDIO_PHY_ID_DEVAD;
+}
+
+#endif /* __LINUX_MDIO_H__ */