mfd: Support software initiated shutdown of WM831x PMICs

In systems where there is no hardware signal from the processor to the
PMIC to initiate the final power off sequence we must initiate the
shutdown with a register write to the PMIC. Support such systems in the
driver. Since this may prevent a full shutdown of the system platform
data is used to enable the feature.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

diff --git a/drivers/mfd/wm831x-core.c b/drivers/mfd/wm831x-core.c
index 9338f8d..e758c89 100644 (file)
--- a/drivers/mfd/wm831x-core.c
+++ b/drivers/mfd/wm831x-core.c
@@ -25,6 +25,7 @@
 #include <linux/mfd/wm831x/irq.h>
 #include <linux/mfd/wm831x/auxadc.h>
 #include <linux/mfd/wm831x/otp.h>
+#include <linux/mfd/wm831x/pmu.h>
 #include <linux/mfd/wm831x/regulator.h>
 
 /* Current settings - values are 2*2^(reg_val/4) microamps.  These are
@@ -1621,6 +1622,7 @@ int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq)
        mutex_init(&wm831x->io_lock);
        mutex_init(&wm831x->key_lock);
        dev_set_drvdata(wm831x->dev, wm831x);
+       wm831x->soft_shutdown = pdata->soft_shutdown;
 
        ret = wm831x_reg_read(wm831x, WM831X_PARENT_ID);
        if (ret < 0) {
@@ -1922,6 +1924,15 @@ int wm831x_device_suspend(struct wm831x *wm831x)
        return 0;
 }
 
+void wm831x_device_shutdown(struct wm831x *wm831x)
+{
+       if (wm831x->soft_shutdown) {
+               dev_info(wm831x->dev, "Initiating shutdown...\n");
+               wm831x_set_bits(wm831x, WM831X_POWER_STATE, WM831X_CHIP_ON, 0);
+       }
+}
+EXPORT_SYMBOL_GPL(wm831x_device_shutdown);
+
 MODULE_DESCRIPTION("Core support for the WM831X AudioPlus PMIC");
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Mark Brown");

diff --git a/drivers/mfd/wm831x-i2c.c b/drivers/mfd/wm831x-i2c.c
index 3ec6085..ac8da1d 100644 (file)
--- a/drivers/mfd/wm831x-i2c.c
+++ b/drivers/mfd/wm831x-i2c.c
@@ -65,6 +65,13 @@ static int wm831x_i2c_suspend(struct device *dev)
        return wm831x_device_suspend(wm831x);
 }
 
+static void wm831x_i2c_shutdown(struct i2c_client *i2c)
+{
+       struct wm831x *wm831x = i2c_get_clientdata(i2c);
+
+       wm831x_device_shutdown(wm831x);
+}
+
 static const struct i2c_device_id wm831x_i2c_id[] = {
        { "wm8310", WM8310 },
        { "wm8311", WM8311 },
@@ -89,6 +96,7 @@ static struct i2c_driver wm831x_i2c_driver = {
        },
        .probe = wm831x_i2c_probe,
        .remove = wm831x_i2c_remove,
+       .shutdown = wm831x_i2c_shutdown,
        .id_table = wm831x_i2c_id,
 };
 

diff --git a/drivers/mfd/wm831x-spi.c b/drivers/mfd/wm831x-spi.c
index 5ea60cd..8d6a9a9 100644 (file)
--- a/drivers/mfd/wm831x-spi.c
+++ b/drivers/mfd/wm831x-spi.c
@@ -68,6 +68,13 @@ static int wm831x_spi_suspend(struct device *dev)
        return wm831x_device_suspend(wm831x);
 }
 
+static void wm831x_spi_shutdown(struct spi_device *spi)
+{
+       struct wm831x *wm831x = dev_get_drvdata(&spi->dev);
+
+       wm831x_device_shutdown(wm831x);
+}
+
 static const struct dev_pm_ops wm831x_spi_pm = {
        .freeze = wm831x_spi_suspend,
        .suspend = wm831x_spi_suspend,
@@ -95,6 +102,7 @@ static struct spi_driver wm831x_spi_driver = {
        .id_table       = wm831x_spi_ids,
        .probe          = wm831x_spi_probe,
        .remove         = __devexit_p(wm831x_spi_remove),
+       .shutdown       = wm831x_spi_shutdown,
 };
 
 static int __init wm831x_spi_init(void)

diff --git a/include/linux/mfd/wm831x/core.h b/include/linux/mfd/wm831x/core.h
index 44acdb2..ed8fe0d 100644 (file)
--- a/include/linux/mfd/wm831x/core.h
+++ b/include/linux/mfd/wm831x/core.h
@@ -371,6 +371,8 @@ struct wm831x {
        int irq_masks_cur[WM831X_NUM_IRQ_REGS];   /* Currently active value */
        int irq_masks_cache[WM831X_NUM_IRQ_REGS]; /* Cached hardware value */
 
+       bool soft_shutdown;
+
        /* Chip revision based flags */
        unsigned has_gpio_ena:1;         /* Has GPIO enable bit */
        unsigned has_cs_sts:1;           /* Has current sink status bit */
@@ -409,6 +411,7 @@ int wm831x_bulk_read(struct wm831x *wm831x, unsigned short reg,
 int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq);
 void wm831x_device_exit(struct wm831x *wm831x);
 int wm831x_device_suspend(struct wm831x *wm831x);
+void wm831x_device_shutdown(struct wm831x *wm831x);
 int wm831x_irq_init(struct wm831x *wm831x, int irq);
 void wm831x_irq_exit(struct wm831x *wm831x);
 void wm831x_auxadc_init(struct wm831x *wm831x);

diff --git a/include/linux/mfd/wm831x/pdata.h b/include/linux/mfd/wm831x/pdata.h
index 0ba2459..1d7a3f7 100644 (file)
--- a/include/linux/mfd/wm831x/pdata.h
+++ b/include/linux/mfd/wm831x/pdata.h
@@ -123,6 +123,9 @@ struct wm831x_pdata {
        /** Disable the touchscreen */
        bool disable_touch;
 
+       /** The driver should initiate a power off sequence during shutdown */
+       bool soft_shutdown;
+
        int irq_base;
        int gpio_base;
        int gpio_defaults[WM831X_GPIO_NUM];