ath9k: Remove a few redundant variables/macros
authorSujith <Sujith.Manoharan@atheros.com>
Thu, 23 Jul 2009 10:02:41 +0000 (15:32 +0530)
committerJohn W. Linville <linville@tuxdriver.com>
Mon, 27 Jul 2009 19:24:15 +0000 (15:24 -0400)
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
drivers/net/wireless/ath/ath9k/ath9k.h
drivers/net/wireless/ath/ath9k/xmit.c

index d816c9d..e2ebf1a 100644 (file)
@@ -190,7 +190,6 @@ void ath_descdma_cleanup(struct ath_softc *sc, struct ath_descdma *dd,
 #define ATH_AGGR_MIN_QDEPTH        2
 #define ATH_AMPDU_SUBFRAME_DEFAULT 32
 #define ATH_AMPDU_LIMIT_MAX        (64 * 1024 - 1)
-#define ATH_AMPDU_LIMIT_DEFAULT    ATH_AMPDU_LIMIT_MAX
 
 #define IEEE80211_SEQ_SEQ_SHIFT    4
 #define IEEE80211_SEQ_MAX          4096
index 2c01fda..6eb2927 100644 (file)
@@ -455,7 +455,7 @@ static u32 ath_lookup_rate(struct ath_softc *sc, struct ath_buf *bf,
        struct ieee80211_tx_rate *rates;
        struct ath_tx_info_priv *tx_info_priv;
        u32 max_4ms_framelen, frmlen;
-       u16 aggr_limit, legacy = 0, maxampdu;
+       u16 aggr_limit, legacy = 0;
        int i;
 
        skb = bf->bf_mpdu;
@@ -490,16 +490,15 @@ static u32 ath_lookup_rate(struct ath_softc *sc, struct ath_buf *bf,
        if (tx_info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE || legacy)
                return 0;
 
-       aggr_limit = min(max_4ms_framelen, (u32)ATH_AMPDU_LIMIT_DEFAULT);
+       aggr_limit = min(max_4ms_framelen, (u32)ATH_AMPDU_LIMIT_MAX);
 
        /*
         * h/w can accept aggregates upto 16 bit lengths (65535).
         * The IE, however can hold upto 65536, which shows up here
         * as zero. Ignore 65536 since we  are constrained by hw.
         */
-       maxampdu = tid->an->maxampdu;
-       if (maxampdu)
-               aggr_limit = min(aggr_limit, maxampdu);
+       if (tid->an->maxampdu)
+               aggr_limit = min(aggr_limit, tid->an->maxampdu);
 
        return aggr_limit;
 }
@@ -507,7 +506,6 @@ static u32 ath_lookup_rate(struct ath_softc *sc, struct ath_buf *bf,
 /*
  * Returns the number of delimiters to be added to
  * meet the minimum required mpdudensity.
- * caller should make sure that the rate is HT rate .
  */
 static int ath_compute_num_delims(struct ath_softc *sc, struct ath_atx_tid *tid,
                                  struct ath_buf *bf, u16 frmlen)
@@ -515,7 +513,7 @@ static int ath_compute_num_delims(struct ath_softc *sc, struct ath_atx_tid *tid,
        const struct ath_rate_table *rt = sc->cur_rate_table;
        struct sk_buff *skb = bf->bf_mpdu;
        struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
-       u32 nsymbits, nsymbols, mpdudensity;
+       u32 nsymbits, nsymbols;
        u16 minlen;
        u8 rc, flags, rix;
        int width, half_gi, ndelim, mindelim;
@@ -537,14 +535,12 @@ static int ath_compute_num_delims(struct ath_softc *sc, struct ath_atx_tid *tid,
         * on highest rate in rate series (i.e. first rate) to determine
         * required minimum length for subframe. Take into account
         * whether high rate is 20 or 40Mhz and half or full GI.
-        */
-       mpdudensity = tid->an->mpdudensity;
-
-       /*
+        *
         * If there is no mpdu density restriction, no further calculation
         * is needed.
         */
-       if (mpdudensity == 0)
+
+       if (tid->an->mpdudensity == 0)
                return ndelim;
 
        rix = tx_info->control.rates[0].idx;
@@ -554,9 +550,9 @@ static int ath_compute_num_delims(struct ath_softc *sc, struct ath_atx_tid *tid,
        half_gi = (flags & IEEE80211_TX_RC_SHORT_GI) ? 1 : 0;
 
        if (half_gi)
-               nsymbols = NUM_SYMBOLS_PER_USEC_HALFGI(mpdudensity);
+               nsymbols = NUM_SYMBOLS_PER_USEC_HALFGI(tid->an->mpdudensity);
        else
-               nsymbols = NUM_SYMBOLS_PER_USEC(mpdudensity);
+               nsymbols = NUM_SYMBOLS_PER_USEC(tid->an->mpdudensity);
 
        if (nsymbols == 0)
                nsymbols = 1;