update lists for 533, 537, and add SSYNC workaround into assembly files.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
LSETUP (.Lquad_loop_s, .Lquad_loop_e) LC0=P1;
.Lquad_loop_s:
+#ifdef ANOMALY_05000202
+ R0 = [P0++];
+ R1 = [I0++];
+#else
MNOP || R0 = [P0++] || R1 = [I0++];
+#endif
CC = R0 == R1;
IF !CC JUMP .Lquad_different;
.Lquad_loop_e:
.Lmore_than_seven:
/* There's at least eight bytes to copy. */
P2 += -1; /* because we unroll one iteration */
- LSETUP(.Lword_loop, .Lword_loop) LC0=P2;
+ LSETUP(.Lword_loops, .Lword_loope) LC0=P2;
R0 = R1;
I1 = P1;
R3 = [I1++];
-.Lword_loop:
+#ifdef ANOMALY_05000202
+.Lword_loops:
+ [P0++] = R3;
+.Lword_loope:
+ R3 = [I1++];
+#else
+.Lword_loops:
+.Lword_loope:
MNOP || [P0++] = R3 || R3 = [I1++];
-
+#endif
[P0++] = R3;
/* Any remaining bytes to copy? */
R3 = 0x3;
P2 = R2; /* set remainder */
R1 = [I0++];
- LSETUP (.Lquad_loop, .Lquad_loop) LC0=P1;
-.Lquad_loop: MNOP || [P0++] = R1 || R1 = [I0++];
+ LSETUP (.Lquad_loops, .Lquad_loope) LC0=P1;
+#ifdef ANOMALY_05000202
+.Lquad_loops:
+ [P0++] = R1;
+.Lquad_loope:
+ R1 = [I0++];
+#else
+.Lquad_loops:
+.Lquad_loope:
+ MNOP || [P0++] = R1 || R1 = [I0++];
+#endif
[P0++] = R1;
CC = P2 == 0; /* any remaining bytes? */
R1 = B[P3--] (Z);
CC = P2 == 0;
IF CC JUMP .Lno_loop;
+#ifdef ANOMALY_05000245
+ NOP;
+ NOP;
+#endif
LSETUP (.Lol_s, .Lol_e) LC0 = P2;
.Lol_s: B[P0--] = R1;
.Lol_e: R1 = B[P3--] (Z);
R2 = R0 & R2;
P0 = R2;
P1 = R1;
- CSYNC;
+ CSYNC(R3);
IFLUSH [P0];
1:
IFLUSH [P0++];
CC = P0 < P1 (iu);
IF CC JUMP 1b (bp);
IFLUSH [P0];
- SSYNC;
+ SSYNC(R3);
RTS;
ENDPROC(_blackfin_icache_flush_range)
R2 = R0 & R2;
P0 = R2;
P1 = R1;
- CSYNC;
+ CSYNC(R3);
IFLUSH [P0];
1:
FLUSH [P0];
IF CC JUMP 1b (bp);
IFLUSH [P0];
FLUSH [P0];
- SSYNC;
+ SSYNC(R3);
RTS;
ENDPROC(_blackfin_icache_dcache_flush_range)
R2 = R0 & R2;
P0 = R2;
P1 = R1;
- CSYNC;
+ CSYNC(R3);
FLUSHINV[P0];
1:
FLUSHINV[P0++];
* so do one more.
*/
FLUSHINV[P0];
- SSYNC;
+ SSYNC(R3);
RTS;
ENDPROC(_blackfin_dcache_invalidate_range)
R2 = R0 & R2;
P0 = R2;
P1 = R1;
- CSYNC;
+ CSYNC(R3);
FLUSH[P0];
1:
FLUSH[P0++];
* one more.
*/
FLUSH[P0];
- SSYNC;
+ SSYNC(R3);
RTS;
ENDPROC(_blackfin_dcache_flush_range)
ENTRY(_blackfin_dflush_page)
P1 = 1 << (PAGE_SHIFT - L1_CACHE_SHIFT);
P0 = R0;
- CSYNC;
+ CSYNC(R3);
FLUSH[P0];
LSETUP (.Lfl1, .Lfl1) LC0 = P1;
.Lfl1: FLUSH [P0++];
- SSYNC;
+ SSYNC(R3);
RTS;
ENDPROC(_blackfin_dflush_page)
fp = 0;
#endif
-#ifdef ANOMALY_05000283
+#if defined (ANOMALY_05000283) || defined (ANOMALY_05000315)
cc = r7 == r7;
p5.h = 0xffc0;
p5.l = 0x0014;
#elif !defined(ANOMALY_05000312) && defined(ANOMALY_05000244)
static inline void SSYNC (void)
{
- __builtin_bfin_ssync();
+ __asm__ __volatile__ ("nop; nop; nop;\n\t"
+ "ssync;\n\t"
+ ::);
}
#elif !defined(ANOMALY_05000312) && !defined(ANOMALY_05000244)
static inline void SSYNC (void)
#elif !defined(ANOMALY_05000312) && defined(ANOMALY_05000244)
static inline void CSYNC (void)
{
- __builtin_bfin_csync();
+ __asm__ __volatile__ ("nop; nop; nop;\n\t"
+ "ssync;\n\t"
+ ::);
}
#elif !defined(ANOMALY_05000312) && !defined(ANOMALY_05000244)
static inline void CSYNC (void)
}
#endif
+#else /* __ASSEMBLY__ */
+
+/* SSYNC & CSYNC implementations for assembly files */
+
+#define ssync(x) SSYNC(x)
+#define csync(x) CSYNC(x)
+
+#if defined(ANOMALY_05000312) && defined(ANOMALY_05000244)
+#define SSYNC(scratch) cli scratch; nop; nop; SSYNC; sti scratch;
+#define CSYNC(scratch) cli scratch; nop; nop; CSYNC; sti scratch;
+
+#elif defined(ANOMALY_05000312) && !defined(ANOMALY_05000244)
+#define SSYNC(scratch) cli scratch; nop; nop; SSYNC; sti scratch;
+#define CSYNC(scratch) cli scratch; nop; nop; CSYNC; sti scratch;
+
+#elif !defined(ANOMALY_05000312) && defined(ANOMALY_05000244)
+#define SSYNC(scratch) nop; nop; nop; SSYNC;
+#define CSYNC(scratch) nop; nop; nop; CSYNC;
+
+#elif !defined(ANOMALY_05000312) && !defined(ANOMALY_05000244)
+#define SSYNC(scratch) SSYNC;
+#define CSYNC(scratch) CSYNC;
+
+#endif /* ANOMALY_05000312 & ANOMALY_05000244 handling */
+
#endif /* __ASSEMBLY__ */
#endif /* _BLACKFIN_H_ */
#endif
/* Issues that are common to 0.5, 0.4, and 0.3 silicon */
-#if (defined(CONFIG_BF_REV_0_5) || defined(CONFIG_BF_REV_0_4) || defined(CONFIG_BF_REV_0_3))
+#if (defined(CONFIG_BF_REV_0_5) || defined(CONFIG_BF_REV_0_4) \
+ || defined(CONFIG_BF_REV_0_3))
#define ANOMALY_05000074 /* A multi issue instruction with dsp32shiftimm in
slot1 and store of a P register in slot 2 is not
supported */
control */
#define ANOMALY_05000283 /* A system MMR write is stalled indefinitely when
killed in a particular stage*/
+#define ANOMALY_05000311 /* Erroneous flag pin operations under specific
+ sequences */
#define ANOMALY_05000312 /* Errors when SSYNC, CSYNC, or loads to LT, LB and LC
registers are interrupted */
-#define ANOMALY_05000311 /* Erroneous flag pin operations under specific sequences*/
-
-#endif
+#define ANOMALY_05000313 /* PPI Is Level-Sensitive on First Transfer */
+#define ANOMALY_05000315 /* Killed System MMR Write Completes Erroneously On
+ * Next System MMR Access */
+#define ANOMALY_05000319 /* Internal Voltage Regulator Values of 1.05V, 1.10V
+ * and 1.15V Not Allowed for LQFP Packages */
+#endif /* Issues that are common to 0.5, 0.4, and 0.3 silicon */
/* These issues only occur on 0.3 or 0.4 BF533 */
#if (defined(CONFIG_BF_REV_0_4) || defined(CONFIG_BF_REV_0_3))
internal voltage regulator (VDDint) to increase. */
#define ANOMALY_05000270 /* High I/O activity causes the output voltage of the
internal voltage regulator (VDDint) to decrease */
-#endif
+#endif /* issues only occur on 0.3 or 0.4 BF533 */
/* These issues are only on 0.4 silicon */
#if (defined(CONFIG_BF_REV_0_4))
#define ANOMALY_05000234 /* Incorrect Revision Number in DSPID Register */
#define ANOMALY_05000250 /* Incorrect Bit-Shift of Data Word in Multichannel
(TDM) */
-#endif
+#endif /* issues are only on 0.4 silicon */
/* These issues are only on 0.3 silicon */
#if defined(CONFIG_BF_REV_0_3)
#define ANOMALY_05000233 /* PPI_FS3 is not driven in 2 or 3 internal Frame
Sync Transmit Mode */
#define ANOMALY_05000271 /* Spontaneous reset of Internal Voltage Regulator */
+#endif /* only on 0.3 silicon */
+
+#if defined(CONFIG_BF_REV_0_2)
+#define ANOMALY_05000067 /* Watchpoints (Hardware Breakpoints) are not
+ * supported */
+#define ANOMALY_05000109 /* Reserved bits in SYSCFG register not set at
+ * power on */
+#define ANOMALY_05000116 /* Trace Buffers may record discontinuities into
+ * emulation mode and/or exception, NMI, reset
+ * handlers */
+#define ANOMALY_05000123 /* DTEST_COMMAND initiated memory access may be
+ * incorrect if data cache or DMA is active */
+#define ANOMALY_05000124 /* DMA Lock-up at CCLK to SCLK ratios of 4:1, 2:1,
+ * or 1:1 */
+#define ANOMALY_05000125 /* Erroneous exception when enabling cache */
+#define ANOMALY_05000126 /* SPI clock polarity and phase bits incorrect
+ * during booting */
+#define ANOMALY_05000137 /* DMEM_CONTROL is not set on Reset */
+#define ANOMALY_05000138 /* SPI boot will not complete if there is a zero fill
+ * block in the loader file */
+#define ANOMALY_05000140 /* Allowing the SPORT RX FIFO to fill will cause an
+ * overflow */
+#define ANOMALY_05000141 /* An Infinite Stall occurs with a particular sequence
+ * of consecutive dual dag events */
+#define ANOMALY_05000142 /* Interrupts may be lost when a programmable input
+ * flag is configured to be edge sensitive */
+#define ANOMALY_05000143 /* A read from external memory may return a wrong
+ * value with data cache enabled */
+#define ANOMALY_05000144 /* DMA and TESTSET conflict when both are accessing
+ * external memory */
+#define ANOMALY_05000145 /* In PWM_OUT mode, you must enable the PPI block to
+ * generate a waveform from PPI_CLK */
+#define ANOMALY_05000146 /* MDMA may lose the first few words of a descriptor
+ * chain */
+#define ANOMALY_05000147 /* The source MDMA descriptor may stop with a DMA
+ * Error */
+#define ANOMALY_05000148 /* When booting from a 16-bit asynchronous memory
+ * device, the upper 8-bits of each word must be
+ * 0x00 */
+#define ANOMALY_05000153 /* Frame Delay in SPORT Multichannel Mode */
+#define ANOMALY_05000154 /* SPORT TFS signal is active in Multi-channel mode
+ * outside of valid channels */
+#define ANOMALY_05000155 /* Timer1 can not be used for PWMOUT mode when a
+ * certain PPI mode is in use */
+#define ANOMALY_05000157 /* A killed 32-bit System MMR write will lead to
+ * the next system MMR access thinking it should be
+ * 32-bit. */
+#define ANOMALY_05000163 /* SPORT transmit data is not gated by external frame
+ * sync in certain conditions */
+#define ANOMALY_05000168 /* SDRAM auto-refresh and subsequent Power Ups */
+#define ANOMALY_05000169 /* DATA CPLB page miss can result in lost
+ * write-through cache data writes */
+#define ANOMALY_05000173 /* DMA vs Core accesses to external memory */
+#define ANOMALY_05000174 /* Cache Fill Buffer Data lost */
+#define ANOMALY_05000175 /* Overlapping Sequencer and Memory Stalls */
+#define ANOMALY_05000176 /* Multiplication of (-1) by (-1) followed by an
+ * accumulator saturation */
+#define ANOMALY_05000181 /* Disabling the PPI resets the PPI configuration
+ * registers */
+#define ANOMALY_05000185 /* PPI TX Mode with 2 External Frame Syncs */
+#define ANOMALY_05000191 /* PPI does not invert the Driving PPICLK edge in
+ * Transmit Modes */
+#define ANOMALY_05000192 /* In PPI Transmit Modes with External Frame Syncs
+ * POLC */
+#define ANOMALY_05000206 /* Internal Voltage Regulator may not start up */
+
#endif
#endif /* _MACH_ANOMALY_H_ */
control */
#define ANOMALY_05000283 /* A system MMR write is stalled indefinitely when
killed in a particular stage*/
+#define ANOMALY_05000310 /* False hardware errors caused by fetches at the
+ * boundary of reserved memory */
#define ANOMALY_05000312 /* Errors when SSYNC, CSYNC, or loads to LT, LB and LC
registers are interrupted */
+#define ANOMALY_05000313 /* PPI is level sensitive on first transfer */
+#define ANOMALY_05000322 /* EMAC RMII mode at 10-Base-T speed: RX frames not
+ * received properly */
#endif
#if defined(CONFIG_BF_REV_0_2)
DMA system instability */
#define ANOMALY_05000280 /* SPI Master boot mode does not work well with
Atmel Dataflash devices */
-
+#define ANOMALY_05000281 /* False Hardware Error Exception when ISR context
+ * is not restored */
+#define ANOMALY_05000282 /* Memory DMA corruption with 32-bit data and traffic
+ * control */
+#define ANOMALY_05000283 /* System MMR Write Is Stalled Indefinitely When
+ * Killed in a Particular Stage */
+#define ANOMALY_05000285 /* New Feature: EMAC TX DMA Word Alignment
+ * (Not Available On Older Silicon) */
+#define ANOMALY_05000288 /* SPORTs may receive bad data if FIFOs fill up */
+#define ANOMALY_05000315 /* Killed System MMR Write Completes Erroneously
+ * On Next System MMR Access */
+#define ANOMALY_05000316 /* EMAC RMII mode: collisions occur in Full Duplex
+ * mode */
+#define ANOMALY_05000321 /* EMAC RMII mode: TX frames in half duplex fail with
+ * status No Carrier */
#endif /* CONFIG_BF_REV_0_2 */
#endif /* _MACH_ANOMALY_H_ */
#define bfin_read_SRAM_BASE_ADDRESS() bfin_read32(SRAM_BASE_ADDRESS)
#define bfin_write_SRAM_BASE_ADDRESS(val) bfin_write32(SRAM_BASE_ADDRESS,val)
#define bfin_read_DMEM_CONTROL() bfin_read32(DMEM_CONTROL)
+#ifdef ANOMALY_05000125
+static __inline__ void bfin_write_DMEM_CONTROL(unsigned int val)
+{
+ unsigned long flags, iwr;
+
+ local_irq_save(flags);
+ __asm__(".align 8\n");
+ bfin_write32(IMEM_CONTROL, val);
+ __builtin_bfin_ssync();
+ local_irq_restore(flags);
+}
+#else
#define bfin_write_DMEM_CONTROL(val) bfin_write32(DMEM_CONTROL,val)
+#endif
#define bfin_read_DCPLB_STATUS() bfin_read32(DCPLB_STATUS)
#define bfin_write_DCPLB_STATUS(val) bfin_write32(DCPLB_STATUS,val)
#define bfin_read_DCPLB_FAULT_ADDR() bfin_read32(DCPLB_FAULT_ADDR)
#define DTEST_DATA3 0xFFE0040C
*/
#define bfin_read_IMEM_CONTROL() bfin_read32(IMEM_CONTROL)
+#ifdef ANOMALY_05000125
+static __inline__ void bfin_write_IMEM_CONTROL(unsigned int val)
+{
+ unsigned long flags, iwr;
+
+ local_irq_save(flags);
+ __asm__(".align 8\n");
+ bfin_write32(IMEM_CONTROL, val);
+ __builtin_bfin_ssync();
+ local_irq_restore(flags);
+
+}
+#else
#define bfin_write_IMEM_CONTROL(val) bfin_write32(IMEM_CONTROL,val)
+#endif
#define bfin_read_ICPLB_STATUS() bfin_read32(ICPLB_STATUS)
#define bfin_write_ICPLB_STATUS(val) bfin_write32(ICPLB_STATUS,val)
#define bfin_read_ICPLB_FAULT_ADDR() bfin_read32(ICPLB_FAULT_ADDR)
git.openpandora.org / pandora-kernel.git / commitdiff