help
Support for Freescale MXS-based family of processors
-config ARCH_STMP3XXX
- bool "Freescale STMP3xxx"
- select CPU_ARM926T
- select CLKDEV_LOOKUP
- select ARCH_REQUIRE_GPIOLIB
- select GENERIC_CLOCKEVENTS
- select USB_ARCH_HAS_EHCI
- help
- Support for systems based on the Freescale 3xxx CPUs.
-
config ARCH_NETX
bool "Hilscher NetX based"
select CLKSRC_MMIO
source "arch/arm/mach-shmobile/Kconfig"
-source "arch/arm/plat-stmp3xxx/Kconfig"
-
source "arch/arm/mach-tegra/Kconfig"
source "arch/arm/mach-u300/Kconfig"
machine-$(CONFIG_ARCH_SA1100) := sa1100
machine-$(CONFIG_ARCH_SHARK) := shark
machine-$(CONFIG_ARCH_SHMOBILE) := shmobile
-machine-$(CONFIG_ARCH_STMP378X) := stmp378x
-machine-$(CONFIG_ARCH_STMP37XX) := stmp37xx
machine-$(CONFIG_ARCH_TCC8K) := tcc8k
machine-$(CONFIG_ARCH_TEGRA) := tegra
machine-$(CONFIG_ARCH_U300) := u300
plat-$(CONFIG_ARCH_MXC) := mxc
plat-$(CONFIG_ARCH_OMAP) := omap
plat-$(CONFIG_ARCH_S3C64XX) := samsung
-plat-$(CONFIG_ARCH_STMP3XXX) := stmp3xxx
plat-$(CONFIG_ARCH_TCC_926) := tcc
plat-$(CONFIG_PLAT_IOP) := iop
plat-$(CONFIG_PLAT_NOMADIK) := nomadik
},
};
-void __init sa1111_adjust_zones(unsigned long *size, unsigned long *holes)
-{
- unsigned int sz = SZ_1M >> PAGE_SHIFT;
-
- size[1] = size[0] - sz;
- size[0] = sz;
-}
-
/*
* SA1111 interrupt support. Since clearing an IRQ while there are
* active IRQs causes the interrupt output to pulse, the upper levels
--- /dev/null
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_PERF_EVENTS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_BLK_DEV_INTEGRITY=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_MXS=y
+CONFIG_MACH_STMP378X_DEVB=y
+CONFIG_MACH_TX28=y
+# CONFIG_ARM_THUMB is not set
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT_VOLUNTARY=y
+CONFIG_AEABI=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
+CONFIG_AUTO_ZRELADDR=y
+CONFIG_FPE_NWFPE=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+CONFIG_CAN_DEV=m
+CONFIG_CAN_FLEXCAN=m
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+# CONFIG_BLK_DEV is not set
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_ENC28J60=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_TSC2007=m
+# CONFIG_SERIO is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=m
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_MXS=m
+CONFIG_SPI=y
+CONFIG_SPI_GPIO=m
+CONFIG_DEBUG_GPIO=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HWMON is not set
+# CONFIG_MFD_SUPPORT is not set
+CONFIG_DISPLAY_SUPPORT=m
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+CONFIG_MMC_MXS=y
+CONFIG_RTC_CLASS=m
+CONFIG_RTC_DRV_DS1307=m
+CONFIG_DMADEVICES=y
+CONFIG_MXS_DMA=y
+CONFIG_EXT3_FS=y
+# CONFIG_DNOTIFY is not set
+CONFIG_FSCACHE=m
+CONFIG_FSCACHE_STATS=y
+CONFIG_CACHEFILES=m
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_PRINTK_TIME=y
+CONFIG_FRAME_WARN=2048
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOCKUP_DETECTOR=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_TIMER_STATS=y
+CONFIG_PROVE_LOCKING=y
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+CONFIG_DEBUG_INFO=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_BLK_DEV_IO_TRACE=y
+CONFIG_STRICT_DEVMEM=y
+CONFIG_DEBUG_USER=y
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC7=m
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_ARM_INTEGRATOR=y
+CONFIG_MTD_PHYSMAP=y
CONFIG_ARM_CHARLCD=y
CONFIG_NETDEVICES=y
CONFIG_SMSC_PHY=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_ARM_INTEGRATOR=y
+CONFIG_MTD_PHYSMAP=y
CONFIG_ARM_CHARLCD=y
CONFIG_NETDEVICES=y
CONFIG_SMSC_PHY=y
+++ /dev/null
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCALVERSION="-default"
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_STMP3XXX=y
-CONFIG_ARCH_STMP378X=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_HIGHMEM=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttySDBG0,115200 mem=32M"
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_NET_SCHED=y
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_STANDALONE is not set
-CONFIG_MTD=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_GLUEBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=4
-CONFIG_BLK_DEV_RAM_SIZE=6144
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_INPUT_POLLDEV=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_INPUT_MISC=y
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_DEBUG_GPIO=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_TMPFS=y
-CONFIG_CONFIGFS_FS=m
-# CONFIG_MISC_FILESYSTEMS is not set
-# CONFIG_NETWORK_FILESYSTEMS is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_STRIP_ASM_SYMS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_SHIRQ=y
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_DEBUG_OBJECTS=y
-CONFIG_DEBUG_OBJECTS_SELFTEST=y
-CONFIG_DEBUG_OBJECTS_FREE=y
-CONFIG_DEBUG_OBJECTS_TIMERS=y
-CONFIG_DEBUG_SLAB=y
-CONFIG_DEBUG_SLAB_LEAK=y
-CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_PROVE_LOCKING=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-CONFIG_DEBUG_KOBJECT=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_BOOT_TRACER=y
-CONFIG_STACK_TRACER=y
-CONFIG_BLK_DEV_IO_TRACE=y
-CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
-CONFIG_SECURITY=y
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_LZO=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=y
+++ /dev/null
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCALVERSION="-default"
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_STMP3XXX=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttySDBG0,115200 mem=32M lcd_panel=lms350 rdinit=/bin/sh ignore_loglevel"
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_NET_SCHED=y
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_STANDALONE is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=4
-CONFIG_BLK_DEV_RAM_SIZE=6144
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_INPUT_POLLDEV=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_INPUT_MISC=y
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_DEBUG_GPIO=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_TMPFS=y
-CONFIG_CONFIGFS_FS=m
-# CONFIG_MISC_FILESYSTEMS is not set
-# CONFIG_NETWORK_FILESYSTEMS is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_BOOT_TRACER=y
-CONFIG_STACK_TRACER=y
-CONFIG_BLK_DEV_IO_TRACE=y
-CONFIG_DEBUG_LL=y
-CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
-CONFIG_SECURITY=y
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_LZO=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_ARM_INTEGRATOR=y
+CONFIG_MTD_PHYSMAP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_EEPROM_LEGACY=m
CONFIG_NETDEVICES=y
/*
* This is the maximum virtual address which can be DMA'd from.
*/
-#ifndef MAX_DMA_ADDRESS
+#ifndef ARM_DMA_ZONE_SIZE
#define MAX_DMA_ADDRESS 0xffffffff
+#else
+#define MAX_DMA_ADDRESS (PAGE_OFFSET + ARM_DMA_ZONE_SIZE)
#endif
#ifdef CONFIG_ISA_DMA_API
* allocations. This must be the smallest DMA mask in the system,
* so a successful GFP_DMA allocation will always satisfy this.
*/
-#ifndef ISA_DMA_THRESHOLD
+#ifndef ARM_DMA_ZONE_SIZE
#define ISA_DMA_THRESHOLD (0xffffffffULL)
-#endif
-
-#ifndef arch_adjust_zones
-#define arch_adjust_zones(size,holes) do { } while (0)
-#elif !defined(CONFIG_ZONE_DMA)
-#error "custom arch_adjust_zones() requires CONFIG_ZONE_DMA"
+#else
+#define ISA_DMA_THRESHOLD (PHYS_OFFSET + ARM_DMA_ZONE_SIZE - 1)
#endif
/*
/* Size definitions
* Copyright (C) ARM Limited 1998. All rights reserved.
*/
+#include <asm-generic/sizes.h>
-#ifndef __sizes_h
-#define __sizes_h 1
-
-/* handy sizes */
-#define SZ_16 0x00000010
-#define SZ_32 0x00000020
-#define SZ_64 0x00000040
-#define SZ_128 0x00000080
-#define SZ_256 0x00000100
-#define SZ_512 0x00000200
-
-#define SZ_1K 0x00000400
-#define SZ_2K 0x00000800
-#define SZ_4K 0x00001000
-#define SZ_8K 0x00002000
-#define SZ_16K 0x00004000
-#define SZ_32K 0x00008000
-#define SZ_64K 0x00010000
-#define SZ_128K 0x00020000
-#define SZ_256K 0x00040000
-#define SZ_512K 0x00080000
-
-#define SZ_1M 0x00100000
-#define SZ_2M 0x00200000
-#define SZ_4M 0x00400000
-#define SZ_8M 0x00800000
-#define SZ_16M 0x01000000
-#define SZ_32M 0x02000000
-#define SZ_48M 0x03000000
-#define SZ_64M 0x04000000
-#define SZ_128M 0x08000000
-#define SZ_256M 0x10000000
-#define SZ_512M 0x20000000
-
-#define SZ_1G 0x40000000
-#define SZ_2G 0x80000000
-
-#endif
-
-/* END */
+#define SZ_48M (SZ_32M + SZ_16M)
#include <linux/cpumask.h>
#include <linux/thread_info.h>
-#include <mach/smp.h>
-
#ifndef CONFIG_SMP
# error "<asm/smp.h> included in non-SMP build"
#endif
/*
- * Raise an IPI cross call on CPUs in callmap.
+ * Provide a function to raise an IPI cross call on CPUs in callmap.
*/
-extern void smp_cross_call(const struct cpumask *mask, int ipi);
+extern void set_smp_cross_call(void (*)(const struct cpumask *, unsigned int));
/*
* Boot a secondary CPU, and assign it the specified idle task.
}
}
+static void (*smp_cross_call)(const struct cpumask *, unsigned int);
+
+void __init set_smp_cross_call(void (*fn)(const struct cpumask *, unsigned int))
+{
+ smp_cross_call = fn;
+}
+
void arch_send_call_function_ipi_mask(const struct cpumask *mask)
{
smp_cross_call(mask, IPI_CALL_FUNC);
*/
#define CONSISTENT_DMA_SIZE (14<<20)
-#ifndef __ASSEMBLY__
/*
* Restrict DMA-able region to workaround silicon bug. The bug
* restricts buffers available for DMA to video hardware to be
* below 128M
*/
-static inline void
-__arch_adjust_zones(unsigned long *size, unsigned long *holes)
-{
- unsigned int sz = (128<<20) >> PAGE_SHIFT;
-
- size[1] = size[0] - sz;
- size[0] = sz;
-}
-
-#define arch_adjust_zones(zone_size, holes) \
- if ((meminfo.bank[0].size >> 20) > 128) __arch_adjust_zones(zone_size, holes)
-
-#define ISA_DMA_THRESHOLD (PHYS_OFFSET + (128<<20) - 1)
-#define MAX_DMA_ADDRESS (PAGE_OFFSET + (128<<20))
-
-#endif
+#define ARM_DMA_ZONE_SIZE SZ_128M
#endif /* __ASM_ARCH_MEMORY_H */
+++ /dev/null
-/* linux/arch/arm/mach-exynos4/include/mach/smp.h
- *
- * Cloned from arch/arm/mach-realview/include/mach/smp.h
-*/
-
-#ifndef ASM_ARCH_SMP_H
-#define ASM_ARCH_SMP_H __FILE__
-
-#include <asm/hardware/gic.h>
-
-/*
- * We use IRQ1 as the IPI
- */
-static inline void smp_cross_call(const struct cpumask *mask, int ipi)
-{
- gic_raise_softirq(mask, ipi);
-}
-
-#endif
#include <linux/io.h>
#include <asm/cacheflush.h>
+#include <asm/hardware/gic.h>
#include <asm/smp_scu.h>
#include <asm/unified.h>
* the boot monitor to read the system wide flags register,
* and branch to the address found there.
*/
- smp_cross_call(cpumask_of(cpu), 1);
+ gic_raise_softirq(cpumask_of(cpu), 1);
timeout = jiffies + (1 * HZ);
while (time_before(jiffies, timeout)) {
for (i = 0; i < ncores; i++)
set_cpu_possible(i, true);
+
+ set_smp_cross_call(gic_raise_softirq);
}
void __init platform_smp_prepare_cpus(unsigned int max_cpus)
* There should not be more than (0xd0000000 - 0xc0000000)
* bytes of RAM.
*/
-#define ISA_DMA_THRESHOLD (PHYS_OFFSET + SZ_256M - 1)
-#define MAX_DMA_ADDRESS (PAGE_OFFSET + SZ_256M)
+#define ARM_DMA_ZONE_SIZE SZ_256M
#endif
#include <linux/clockchips.h>
#include <linux/interrupt.h>
#include <linux/io.h>
+#include <linux/mtd/physmap.h>
#include <mach/hardware.h>
#include <mach/platform.h>
#include <mach/lm.h>
#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
#include <asm/mach/irq.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#define EBI_CSR1 (VA_EBI_BASE + INTEGRATOR_EBI_CSR1_OFFSET)
#define EBI_LOCK (VA_EBI_BASE + INTEGRATOR_EBI_LOCK_OFFSET)
-static int ap_flash_init(void)
+static int ap_flash_init(struct platform_device *dev)
{
u32 tmp;
return 0;
}
-static void ap_flash_exit(void)
+static void ap_flash_exit(struct platform_device *dev)
{
u32 tmp;
}
}
-static void ap_flash_set_vpp(int on)
+static void ap_flash_set_vpp(struct platform_device *pdev, int on)
{
void __iomem *reg = on ? SC_CTRLS : SC_CTRLC;
writel(INTEGRATOR_SC_CTRL_nFLVPPEN, reg);
}
-static struct flash_platform_data ap_flash_data = {
- .map_name = "cfi_probe",
+static struct physmap_flash_data ap_flash_data = {
.width = 4,
.init = ap_flash_init,
.exit = ap_flash_exit,
};
static struct platform_device cfi_flash_device = {
- .name = "armflash",
+ .name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &ap_flash_data,
#include <linux/io.h>
#include <linux/gfp.h>
#include <linux/clkdev.h>
+#include <linux/mtd/physmap.h>
#include <mach/hardware.h>
#include <mach/platform.h>
#include <mach/lm.h>
#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
#include <asm/mach/irq.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
/*
* Flash handling.
*/
-static int intcp_flash_init(void)
+static int intcp_flash_init(struct platform_device *dev)
{
u32 val;
return 0;
}
-static void intcp_flash_exit(void)
+static void intcp_flash_exit(struct platform_device *dev)
{
u32 val;
writel(val, INTCP_VA_CTRL_BASE + INTCP_FLASHPROG);
}
-static void intcp_flash_set_vpp(int on)
+static void intcp_flash_set_vpp(struct platform_device *pdev, int on)
{
u32 val;
writel(val, INTCP_VA_CTRL_BASE + INTCP_FLASHPROG);
}
-static struct flash_platform_data intcp_flash_data = {
- .map_name = "cfi_probe",
+static struct physmap_flash_data intcp_flash_data = {
.width = 4,
.init = intcp_flash_init,
.exit = intcp_flash_exit,
};
static struct platform_device intcp_flash_device = {
- .name = "armflash",
+ .name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &intcp_flash_data,
return (dev->bus == &pci_bus_type ) && ((dma_addr + size) >= SZ_64M);
}
-/*
- * Only first 64MB of memory can be accessed via PCI.
- * We use GFP_DMA to allocate safe buffers to do map/unmap.
- * This is really ugly and we need a better way of specifying
- * DMA-capable regions of memory.
- */
-void __init ixp4xx_adjust_zones(unsigned long *zone_size,
- unsigned long *zhole_size)
-{
- unsigned int sz = SZ_64M >> PAGE_SHIFT;
-
- /*
- * Only adjust if > 64M on current system
- */
- if (zone_size[0] <= sz)
- return;
-
- zone_size[1] = zone_size[0] - sz;
- zone_size[0] = sz;
- zhole_size[1] = zhole_size[0];
- zhole_size[0] = 0;
-}
-
void __init ixp4xx_pci_preinit(void)
{
unsigned long cpuid = read_cpuid_id();
*/
#define PLAT_PHYS_OFFSET UL(0x00000000)
-#if !defined(__ASSEMBLY__) && defined(CONFIG_PCI)
-
-void ixp4xx_adjust_zones(unsigned long *size, unsigned long *holes);
-
-#define arch_adjust_zones(size, holes) \
- ixp4xx_adjust_zones(size, holes)
-
-#define ISA_DMA_THRESHOLD (SZ_64M - 1)
-#define MAX_DMA_ADDRESS (PAGE_OFFSET + SZ_64M)
-
+#ifdef CONFIG_PCI
+#define ARM_DMA_ZONE_SIZE SZ_64M
#endif
#endif
+++ /dev/null
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_MSM_SMP_H
-#define __ASM_ARCH_MSM_SMP_H
-
-#include <asm/hardware/gic.h>
-
-static inline void smp_cross_call(const struct cpumask *mask, int ipi)
-{
- gic_raise_softirq(mask, ipi);
-}
-
-#endif
* the boot monitor to read the system wide flags register,
* and branch to the address found there.
*/
- smp_cross_call(cpumask_of(cpu), 1);
+ gic_raise_softirq(cpumask_of(cpu), 1);
timeout = jiffies + (1 * HZ);
while (time_before(jiffies, timeout)) {
for (i = 0; i < NR_CPUS; i++)
set_cpu_possible(i, true);
+
+ set_smp_cross_call(gic_raise_softirq);
}
void __init platform_smp_prepare_cpus(unsigned int max_cpus)
comment "MXS platforms:"
+config MACH_STMP378X_DEVB
+ bool "Support STMP378x_devb Platform"
+ select SOC_IMX23
+ select MXS_HAVE_AMBA_DUART
+ select MXS_HAVE_PLATFORM_AUART
+ select MXS_HAVE_PLATFORM_MXS_MMC
+ help
+ Include support for STMP378x-devb platform. This includes specific
+ configurations for the board and its peripherals.
+
config MACH_MX23EVK
bool "Support MX23EVK Platform"
select SOC_IMX23
obj-$(CONFIG_SOC_IMX23) += clock-mx23.o mm-mx23.o
obj-$(CONFIG_SOC_IMX28) += clock-mx28.o mm-mx28.o
+obj-$(CONFIG_MACH_STMP378X_DEVB) += mach-stmp378x_devb.o
obj-$(CONFIG_MACH_MX23EVK) += mach-mx23evk.o
obj-$(CONFIG_MACH_MX28EVK) += mach-mx28evk.o
obj-$(CONFIG_MODULE_TX28) += module-tx28.o
--- /dev/null
+/*
+ * board setup for STMP378x-Development-Board
+ *
+ * based on mx23evk board setup and information gained form the original
+ * plat-stmp based board setup, now converted to mach-mxs.
+ *
+ * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2011 Wolfram Sang, Pengutronix e.K.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/spi/spi.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include <mach/common.h>
+#include <mach/iomux-mx23.h>
+
+#include "devices-mx23.h"
+
+#define STMP378X_DEVB_MMC0_WRITE_PROTECT MXS_GPIO_NR(1, 30)
+#define STMP378X_DEVB_MMC0_SLOT_POWER MXS_GPIO_NR(1, 29)
+
+#define STMP378X_DEVB_PAD_AUART (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL)
+
+static const iomux_cfg_t stmp378x_dvb_pads[] __initconst = {
+ /* duart (extended setup missing in old boardcode, too */
+ MX23_PAD_PWM0__DUART_RX,
+ MX23_PAD_PWM1__DUART_TX,
+
+ /* auart */
+ MX23_PAD_AUART1_RX__AUART1_RX | STMP378X_DEVB_PAD_AUART,
+ MX23_PAD_AUART1_TX__AUART1_TX | STMP378X_DEVB_PAD_AUART,
+ MX23_PAD_AUART1_CTS__AUART1_CTS | STMP378X_DEVB_PAD_AUART,
+ MX23_PAD_AUART1_RTS__AUART1_RTS | STMP378X_DEVB_PAD_AUART,
+
+ /* mmc */
+ MX23_PAD_SSP1_DATA0__SSP1_DATA0 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX23_PAD_SSP1_DATA1__SSP1_DATA1 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX23_PAD_SSP1_DATA2__SSP1_DATA2 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX23_PAD_SSP1_DATA3__SSP1_DATA3 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX23_PAD_SSP1_CMD__SSP1_CMD |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX23_PAD_SSP1_DETECT__SSP1_DETECT |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+ MX23_PAD_SSP1_SCK__SSP1_SCK |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+ MX23_PAD_PWM4__GPIO_1_30 | MXS_PAD_CTRL, /* write protect */
+ MX23_PAD_PWM3__GPIO_1_29 | MXS_PAD_CTRL, /* power enable */
+};
+
+static struct mxs_mmc_platform_data stmp378x_dvb_mmc_pdata __initdata = {
+ .wp_gpio = STMP378X_DEVB_MMC0_WRITE_PROTECT,
+};
+
+static struct spi_board_info spi_board_info[] __initdata = {
+#if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
+ {
+ .modalias = "enc28j60",
+ .max_speed_hz = 6 * 1000 * 1000,
+ .bus_num = 1,
+ .chip_select = 0,
+ .platform_data = NULL,
+ },
+#endif
+};
+
+static void __init stmp378x_dvb_init(void)
+{
+ int ret;
+
+ mxs_iomux_setup_multiple_pads(stmp378x_dvb_pads,
+ ARRAY_SIZE(stmp378x_dvb_pads));
+
+ mx23_add_duart();
+ mx23_add_auart0();
+
+ /* power on mmc slot */
+ ret = gpio_request_one(STMP378X_DEVB_MMC0_SLOT_POWER,
+ GPIOF_OUT_INIT_LOW, "mmc0-slot-power");
+ if (ret)
+ pr_warn("could not power mmc (%d)\n", ret);
+
+ mx23_add_mxs_mmc(0, &stmp378x_dvb_mmc_pdata);
+
+ spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
+}
+
+static void __init stmp378x_dvb_timer_init(void)
+{
+ mx23_clocks_init();
+}
+
+static struct sys_timer stmp378x_dvb_timer = {
+ .init = stmp378x_dvb_timer_init,
+};
+
+MACHINE_START(STMP378X, "STMP378X")
+ .map_io = mx23_map_io,
+ .init_irq = mx23_init_irq,
+ .init_machine = stmp378x_dvb_init,
+ .timer = &stmp378x_dvb_timer,
+MACHINE_END
#include <plat/tc.h>
#include <plat/flash.h>
-void omap1_set_vpp(struct map_info *map, int enable)
+void omap1_set_vpp(struct platform_device *pdev, int enable)
{
static int count;
u32 l;
extern void __init gic_init_irq(void);
extern void omap_smc1(u32 fn, u32 arg);
+#ifdef CONFIG_SMP
+/* Needed for secondary core boot */
+extern void omap_secondary_startup(void);
+extern u32 omap_modify_auxcoreboot0(u32 set_mask, u32 clear_mask);
+extern void omap_auxcoreboot_addr(u32 cpu_addr);
+extern u32 omap_read_auxcoreboot0(void);
+#endif
#endif
#include <linux/io.h>
#include <asm/cacheflush.h>
+#include <asm/hardware/gic.h>
#include <asm/smp_scu.h>
#include <mach/hardware.h>
#include <mach/omap4-common.h>
omap_modify_auxcoreboot0(0x200, 0xfffffdff);
flush_cache_all();
smp_wmb();
- smp_cross_call(cpumask_of(cpu), 1);
+ gic_raise_softirq(cpumask_of(cpu), 1);
/*
* Now the secondary core is starting up let it run its
for (i = 0; i < ncores; i++)
set_cpu_possible(i, true);
+
+ set_smp_cross_call(gic_raise_softirq);
}
void __init platform_smp_prepare_cpus(unsigned int max_cpus)
unsigned long it8152_base_address;
static int cmx2xx_it8152_irq_gpio;
-/*
- * Only first 64MB of memory can be accessed via PCI.
- * We use GFP_DMA to allocate safe buffers to do map/unmap.
- * This is really ugly and we need a better way of specifying
- * DMA-capable regions of memory.
- */
-void __init cmx2xx_pci_adjust_zones(unsigned long *zone_size,
- unsigned long *zhole_size)
-{
- unsigned int sz = SZ_64M >> PAGE_SHIFT;
-
- if (machine_is_armcore()) {
- pr_info("Adjusting zones for CM-X2XX\n");
-
- /*
- * Only adjust if > 64M on current system
- */
- if (zone_size[0] <= sz)
- return;
-
- zone_size[1] = zone_size[0] - sz;
- zone_size[0] = sz;
- zhole_size[1] = zhole_size[0];
- zhole_size[0] = 0;
- }
-}
-
static void cmx2xx_it8152_irq_demux(unsigned int irq, struct irq_desc *desc)
{
/* clear our parent irq */
* StrataFlash
*/
-static void hx4700_set_vpp(struct map_info *map, int vpp)
+static void hx4700_set_vpp(struct platform_device *pdev, int vpp)
{
gpio_set_value(GPIO91_HX4700_FLASH_VPEN, vpp);
}
*/
#define PLAT_PHYS_OFFSET UL(0xa0000000)
-#if !defined(__ASSEMBLY__) && defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
-void cmx2xx_pci_adjust_zones(unsigned long *size, unsigned long *holes);
-
-#define arch_adjust_zones(size, holes) \
- cmx2xx_pci_adjust_zones(size, holes)
-
-#define ISA_DMA_THRESHOLD (PHYS_OFFSET + SZ_64M - 1)
-#define MAX_DMA_ADDRESS (PAGE_OFFSET + SZ_64M)
+#if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
+#define ARM_DMA_ZONE_SIZE SZ_64M
#endif
#endif
* StrataFlash
*/
-static void magician_set_vpp(struct map_info *map, int vpp)
+static void magician_set_vpp(struct platform_device *pdev, int vpp)
{
gpio_set_value(EGPIO_MAGICIAN_FLASH_VPP, vpp);
}
#include <linux/amba/mmci.h>
#include <linux/gfp.h>
#include <linux/clkdev.h>
+#include <linux/mtd/physmap.h>
#include <asm/system.h>
#include <mach/hardware.h>
#include <asm/hardware/icst.h>
#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
#include <asm/mach/irq.h>
#include <asm/mach/map.h>
#include "core.h"
-#ifdef CONFIG_ZONE_DMA
-/*
- * Adjust the zones if there are restrictions for DMA access.
- */
-void __init realview_adjust_zones(unsigned long *size, unsigned long *hole)
-{
- unsigned long dma_size = SZ_256M >> PAGE_SHIFT;
-
- if (!machine_is_realview_pbx() || size[0] <= dma_size)
- return;
-
- size[ZONE_NORMAL] = size[0] - dma_size;
- size[ZONE_DMA] = dma_size;
- hole[ZONE_NORMAL] = hole[0];
- hole[ZONE_DMA] = 0;
-}
-#endif
-
-
#define REALVIEW_FLASHCTRL (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_FLASH_OFFSET)
-static int realview_flash_init(void)
-{
- u32 val;
-
- val = __raw_readl(REALVIEW_FLASHCTRL);
- val &= ~REALVIEW_FLASHPROG_FLVPPEN;
- __raw_writel(val, REALVIEW_FLASHCTRL);
-
- return 0;
-}
-
-static void realview_flash_exit(void)
-{
- u32 val;
-
- val = __raw_readl(REALVIEW_FLASHCTRL);
- val &= ~REALVIEW_FLASHPROG_FLVPPEN;
- __raw_writel(val, REALVIEW_FLASHCTRL);
-}
-
-static void realview_flash_set_vpp(int on)
+static void realview_flash_set_vpp(struct platform_device *pdev, int on)
{
u32 val;
__raw_writel(val, REALVIEW_FLASHCTRL);
}
-static struct flash_platform_data realview_flash_data = {
- .map_name = "cfi_probe",
+static struct physmap_flash_data realview_flash_data = {
.width = 4,
- .init = realview_flash_init,
- .exit = realview_flash_exit,
.set_vpp = realview_flash_set_vpp,
};
struct platform_device realview_flash_device = {
- .name = "armflash",
+ .name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &realview_flash_data,
#define PLAT_PHYS_OFFSET UL(0x00000000)
#endif
-#if !defined(__ASSEMBLY__) && defined(CONFIG_ZONE_DMA)
-extern void realview_adjust_zones(unsigned long *size, unsigned long *hole);
-#define arch_adjust_zones(size, hole) \
- realview_adjust_zones(size, hole)
-
-#define ISA_DMA_THRESHOLD (PHYS_OFFSET + SZ_256M - 1)
-#define MAX_DMA_ADDRESS (PAGE_OFFSET + SZ_256M)
+#ifdef CONFIG_ZONE_DMA
+#define ARM_DMA_ZONE_SIZE SZ_256M
#endif
#ifdef CONFIG_SPARSEMEM
+++ /dev/null
-#ifndef ASMARM_ARCH_SMP_H
-#define ASMARM_ARCH_SMP_H
-
-#include <asm/hardware/gic.h>
-
-/*
- * We use IRQ1 as the IPI
- */
-static inline void smp_cross_call(const struct cpumask *mask, int ipi)
-{
- gic_raise_softirq(mask, ipi);
-}
-
-#endif
#include <linux/io.h>
#include <mach/hardware.h>
+#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <asm/smp_scu.h>
#include <asm/unified.h>
for (i = 0; i < ncores; i++)
set_cpu_possible(i, true);
+
+ set_smp_cross_call(gic_raise_softirq);
}
void __init platform_smp_prepare_cpus(unsigned int max_cpus)
#include "nor-simtec.h"
-static void simtec_nor_vpp(struct map_info *map, int vpp)
+static void simtec_nor_vpp(struct platform_device *pdev, int vpp)
{
unsigned int val;
unsigned long flags;
*/
#define PLAT_PHYS_OFFSET UL(0xc0000000)
-#ifndef __ASSEMBLY__
-
#ifdef CONFIG_SA1111
-void sa1111_adjust_zones(unsigned long *size, unsigned long *holes);
-
-#define arch_adjust_zones(size, holes) \
- sa1111_adjust_zones(size, holes)
-
-#define ISA_DMA_THRESHOLD (PHYS_OFFSET + SZ_1M - 1)
-#define MAX_DMA_ADDRESS (PAGE_OFFSET + SZ_1M)
-
-#endif
+#define ARM_DMA_ZONE_SIZE SZ_1M
#endif
/*
*/
#define PLAT_PHYS_OFFSET UL(0x08000000)
-#ifndef __ASSEMBLY__
-
-static inline void __arch_adjust_zones(unsigned long *zone_size, unsigned long *zhole_size)
-{
- /* Only the first 4 MB (=1024 Pages) are usable for DMA */
- /* See dev / -> .properties in OpenFirmware. */
- zone_size[1] = zone_size[0] - 1024;
- zone_size[0] = 1024;
- zhole_size[1] = zhole_size[0];
- zhole_size[0] = 0;
-}
-
-#define arch_adjust_zones(size, holes) \
- __arch_adjust_zones(size, holes)
-
-#define ISA_DMA_THRESHOLD (PHYS_OFFSET + SZ_4M - 1)
-#define MAX_DMA_ADDRESS (PAGE_OFFSET + SZ_4M)
-
-#endif
+#define ARM_DMA_ZONE_SIZE SZ_4M
/*
* Cache flushing area
+++ /dev/null
-#ifndef __MACH_SMP_H
-#define __MACH_SMP_H
-
-#include <asm/hardware/gic.h>
-
-/*
- * We use IRQ1 as the IPI
- */
-static inline void smp_cross_call(const struct cpumask *mask, int ipi)
-{
-#if defined(CONFIG_ARM_GIC)
- gic_raise_softirq(mask, ipi);
-#endif
-}
-
-#endif
#include <linux/device.h>
#include <linux/smp.h>
#include <linux/io.h>
+#include <asm/hardware/gic.h>
#include <asm/localtimer.h>
#include <asm/mach-types.h>
#include <mach/common.h>
for (i = 0; i < ncores; i++)
set_cpu_possible(i, true);
+
+ set_smp_cross_call(gic_raise_softirq);
}
void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+++ /dev/null
-obj-$(CONFIG_ARCH_STMP378X) += stmp378x.o
-obj-$(CONFIG_MACH_STMP378X) += stmp378x_devb.o
+++ /dev/null
- zreladdr-y := 0x40008000
-params_phys-y := 0x40000100
-initrd_phys-y := 0x40800000
+++ /dev/null
-/*
- * Low-level IRQ helper macros for Freescale STMP378X
- *
- * Embedded Alley Solutions, Inc <source@embeddedalley.com>
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
- .macro disable_fiq
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
-
- mov \base, #0xf0000000 @ vm address of IRQ controller
- ldr \irqnr, [\base, #0x70] @ HW_ICOLL_STAT
- cmp \irqnr, #0x7f
- moveqs \irqnr, #0 @ Zero flag set for no IRQ
-
- .endm
-
- .macro get_irqnr_preamble, base, tmp
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
+++ /dev/null
-/*
- * Freescale STMP378X interrupts
- *
- * Copyright (C) 2005 Sigmatel Inc
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#define IRQ_DEBUG_UART 0
-#define IRQ_COMMS_RX 1
-#define IRQ_COMMS_TX 1
-#define IRQ_SSP2_ERROR 2
-#define IRQ_VDD5V 3
-#define IRQ_HEADPHONE_SHORT 4
-#define IRQ_DAC_DMA 5
-#define IRQ_DAC_ERROR 6
-#define IRQ_ADC_DMA 7
-#define IRQ_ADC_ERROR 8
-#define IRQ_SPDIF_DMA 9
-#define IRQ_SAIF2_DMA 9
-#define IRQ_SPDIF_ERROR 10
-#define IRQ_SAIF1_IRQ 10
-#define IRQ_SAIF2_IRQ 10
-#define IRQ_USB_CTRL 11
-#define IRQ_USB_WAKEUP 12
-#define IRQ_GPMI_DMA 13
-#define IRQ_SSP1_DMA 14
-#define IRQ_SSP_ERROR 15
-#define IRQ_GPIO0 16
-#define IRQ_GPIO1 17
-#define IRQ_GPIO2 18
-#define IRQ_SAIF1_DMA 19
-#define IRQ_SSP2_DMA 20
-#define IRQ_ECC8_IRQ 21
-#define IRQ_RTC_ALARM 22
-#define IRQ_UARTAPP_TX_DMA 23
-#define IRQ_UARTAPP_INTERNAL 24
-#define IRQ_UARTAPP_RX_DMA 25
-#define IRQ_I2C_DMA 26
-#define IRQ_I2C_ERROR 27
-#define IRQ_TIMER0 28
-#define IRQ_TIMER1 29
-#define IRQ_TIMER2 30
-#define IRQ_TIMER3 31
-#define IRQ_BATT_BRNOUT 32
-#define IRQ_VDDD_BRNOUT 33
-#define IRQ_VDDIO_BRNOUT 34
-#define IRQ_VDD18_BRNOUT 35
-#define IRQ_TOUCH_DETECT 36
-#define IRQ_LRADC_CH0 37
-#define IRQ_LRADC_CH1 38
-#define IRQ_LRADC_CH2 39
-#define IRQ_LRADC_CH3 40
-#define IRQ_LRADC_CH4 41
-#define IRQ_LRADC_CH5 42
-#define IRQ_LRADC_CH6 43
-#define IRQ_LRADC_CH7 44
-#define IRQ_LCDIF_DMA 45
-#define IRQ_LCDIF_ERROR 46
-#define IRQ_DIGCTL_DEBUG_TRAP 47
-#define IRQ_RTC_1MSEC 48
-#define IRQ_DRI_DMA 49
-#define IRQ_DRI_ATTENTION 50
-#define IRQ_GPMI_ATTENTION 51
-#define IRQ_IR 52
-#define IRQ_DCP_VMI 53
-#define IRQ_DCP 54
-#define IRQ_BCH 56
-#define IRQ_PXP 57
-#define IRQ_UARTAPP2_TX_DMA 58
-#define IRQ_UARTAPP2_INTERNAL 59
-#define IRQ_UARTAPP2_RX_DMA 60
-#define IRQ_VDAC_DETECT 61
-#define IRQ_VDD5V_DROOP 64
-#define IRQ_DCDC4P2_BO 65
-
-
-#define NR_REAL_IRQS 128
-#define NR_IRQS (NR_REAL_IRQS + 32 * 3)
-
-/* All interrupts are FIQ capable */
-#define FIQ_START IRQ_DEBUG_UART
-
-/* Hard disk IRQ is a GPMI attention IRQ */
-#define IRQ_HARDDISK IRQ_GPMI_ATTENTION
+++ /dev/null
-/*
- * Freescale STMP378X SoC pin multiplexing
- *
- * Author: Vladislav Buzov <vbuzov@embeddedalley.com>
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#ifndef __ASM_ARCH_PINS_H
-#define __ASM_ARCH_PINS_H
-
-/*
- * Define all STMP378x pins, a pin name corresponds to a STMP378x hardware
- * interface this pin belongs to.
- */
-
-/* Bank 0 */
-#define PINID_GPMI_D00 STMP3XXX_PINID(0, 0)
-#define PINID_GPMI_D01 STMP3XXX_PINID(0, 1)
-#define PINID_GPMI_D02 STMP3XXX_PINID(0, 2)
-#define PINID_GPMI_D03 STMP3XXX_PINID(0, 3)
-#define PINID_GPMI_D04 STMP3XXX_PINID(0, 4)
-#define PINID_GPMI_D05 STMP3XXX_PINID(0, 5)
-#define PINID_GPMI_D06 STMP3XXX_PINID(0, 6)
-#define PINID_GPMI_D07 STMP3XXX_PINID(0, 7)
-#define PINID_GPMI_D08 STMP3XXX_PINID(0, 8)
-#define PINID_GPMI_D09 STMP3XXX_PINID(0, 9)
-#define PINID_GPMI_D10 STMP3XXX_PINID(0, 10)
-#define PINID_GPMI_D11 STMP3XXX_PINID(0, 11)
-#define PINID_GPMI_D12 STMP3XXX_PINID(0, 12)
-#define PINID_GPMI_D13 STMP3XXX_PINID(0, 13)
-#define PINID_GPMI_D14 STMP3XXX_PINID(0, 14)
-#define PINID_GPMI_D15 STMP3XXX_PINID(0, 15)
-#define PINID_GPMI_CLE STMP3XXX_PINID(0, 16)
-#define PINID_GPMI_ALE STMP3XXX_PINID(0, 17)
-#define PINID_GMPI_CE2N STMP3XXX_PINID(0, 18)
-#define PINID_GPMI_RDY0 STMP3XXX_PINID(0, 19)
-#define PINID_GPMI_RDY1 STMP3XXX_PINID(0, 20)
-#define PINID_GPMI_RDY2 STMP3XXX_PINID(0, 21)
-#define PINID_GPMI_RDY3 STMP3XXX_PINID(0, 22)
-#define PINID_GPMI_WPN STMP3XXX_PINID(0, 23)
-#define PINID_GPMI_WRN STMP3XXX_PINID(0, 24)
-#define PINID_GPMI_RDN STMP3XXX_PINID(0, 25)
-#define PINID_AUART1_CTS STMP3XXX_PINID(0, 26)
-#define PINID_AUART1_RTS STMP3XXX_PINID(0, 27)
-#define PINID_AUART1_RX STMP3XXX_PINID(0, 28)
-#define PINID_AUART1_TX STMP3XXX_PINID(0, 29)
-#define PINID_I2C_SCL STMP3XXX_PINID(0, 30)
-#define PINID_I2C_SDA STMP3XXX_PINID(0, 31)
-
-/* Bank 1 */
-#define PINID_LCD_D00 STMP3XXX_PINID(1, 0)
-#define PINID_LCD_D01 STMP3XXX_PINID(1, 1)
-#define PINID_LCD_D02 STMP3XXX_PINID(1, 2)
-#define PINID_LCD_D03 STMP3XXX_PINID(1, 3)
-#define PINID_LCD_D04 STMP3XXX_PINID(1, 4)
-#define PINID_LCD_D05 STMP3XXX_PINID(1, 5)
-#define PINID_LCD_D06 STMP3XXX_PINID(1, 6)
-#define PINID_LCD_D07 STMP3XXX_PINID(1, 7)
-#define PINID_LCD_D08 STMP3XXX_PINID(1, 8)
-#define PINID_LCD_D09 STMP3XXX_PINID(1, 9)
-#define PINID_LCD_D10 STMP3XXX_PINID(1, 10)
-#define PINID_LCD_D11 STMP3XXX_PINID(1, 11)
-#define PINID_LCD_D12 STMP3XXX_PINID(1, 12)
-#define PINID_LCD_D13 STMP3XXX_PINID(1, 13)
-#define PINID_LCD_D14 STMP3XXX_PINID(1, 14)
-#define PINID_LCD_D15 STMP3XXX_PINID(1, 15)
-#define PINID_LCD_D16 STMP3XXX_PINID(1, 16)
-#define PINID_LCD_D17 STMP3XXX_PINID(1, 17)
-#define PINID_LCD_RESET STMP3XXX_PINID(1, 18)
-#define PINID_LCD_RS STMP3XXX_PINID(1, 19)
-#define PINID_LCD_WR STMP3XXX_PINID(1, 20)
-#define PINID_LCD_CS STMP3XXX_PINID(1, 21)
-#define PINID_LCD_DOTCK STMP3XXX_PINID(1, 22)
-#define PINID_LCD_ENABLE STMP3XXX_PINID(1, 23)
-#define PINID_LCD_HSYNC STMP3XXX_PINID(1, 24)
-#define PINID_LCD_VSYNC STMP3XXX_PINID(1, 25)
-#define PINID_PWM0 STMP3XXX_PINID(1, 26)
-#define PINID_PWM1 STMP3XXX_PINID(1, 27)
-#define PINID_PWM2 STMP3XXX_PINID(1, 28)
-#define PINID_PWM3 STMP3XXX_PINID(1, 29)
-#define PINID_PWM4 STMP3XXX_PINID(1, 30)
-
-/* Bank 2 */
-#define PINID_SSP1_CMD STMP3XXX_PINID(2, 0)
-#define PINID_SSP1_DETECT STMP3XXX_PINID(2, 1)
-#define PINID_SSP1_DATA0 STMP3XXX_PINID(2, 2)
-#define PINID_SSP1_DATA1 STMP3XXX_PINID(2, 3)
-#define PINID_SSP1_DATA2 STMP3XXX_PINID(2, 4)
-#define PINID_SSP1_DATA3 STMP3XXX_PINID(2, 5)
-#define PINID_SSP1_SCK STMP3XXX_PINID(2, 6)
-#define PINID_ROTARYA STMP3XXX_PINID(2, 7)
-#define PINID_ROTARYB STMP3XXX_PINID(2, 8)
-#define PINID_EMI_A00 STMP3XXX_PINID(2, 9)
-#define PINID_EMI_A01 STMP3XXX_PINID(2, 10)
-#define PINID_EMI_A02 STMP3XXX_PINID(2, 11)
-#define PINID_EMI_A03 STMP3XXX_PINID(2, 12)
-#define PINID_EMI_A04 STMP3XXX_PINID(2, 13)
-#define PINID_EMI_A05 STMP3XXX_PINID(2, 14)
-#define PINID_EMI_A06 STMP3XXX_PINID(2, 15)
-#define PINID_EMI_A07 STMP3XXX_PINID(2, 16)
-#define PINID_EMI_A08 STMP3XXX_PINID(2, 17)
-#define PINID_EMI_A09 STMP3XXX_PINID(2, 18)
-#define PINID_EMI_A10 STMP3XXX_PINID(2, 19)
-#define PINID_EMI_A11 STMP3XXX_PINID(2, 20)
-#define PINID_EMI_A12 STMP3XXX_PINID(2, 21)
-#define PINID_EMI_BA0 STMP3XXX_PINID(2, 22)
-#define PINID_EMI_BA1 STMP3XXX_PINID(2, 23)
-#define PINID_EMI_CASN STMP3XXX_PINID(2, 24)
-#define PINID_EMI_CE0N STMP3XXX_PINID(2, 25)
-#define PINID_EMI_CE1N STMP3XXX_PINID(2, 26)
-#define PINID_GPMI_CE1N STMP3XXX_PINID(2, 27)
-#define PINID_GPMI_CE0N STMP3XXX_PINID(2, 28)
-#define PINID_EMI_CKE STMP3XXX_PINID(2, 29)
-#define PINID_EMI_RASN STMP3XXX_PINID(2, 30)
-#define PINID_EMI_WEN STMP3XXX_PINID(2, 31)
-
-/* Bank 3 */
-#define PINID_EMI_D00 STMP3XXX_PINID(3, 0)
-#define PINID_EMI_D01 STMP3XXX_PINID(3, 1)
-#define PINID_EMI_D02 STMP3XXX_PINID(3, 2)
-#define PINID_EMI_D03 STMP3XXX_PINID(3, 3)
-#define PINID_EMI_D04 STMP3XXX_PINID(3, 4)
-#define PINID_EMI_D05 STMP3XXX_PINID(3, 5)
-#define PINID_EMI_D06 STMP3XXX_PINID(3, 6)
-#define PINID_EMI_D07 STMP3XXX_PINID(3, 7)
-#define PINID_EMI_D08 STMP3XXX_PINID(3, 8)
-#define PINID_EMI_D09 STMP3XXX_PINID(3, 9)
-#define PINID_EMI_D10 STMP3XXX_PINID(3, 10)
-#define PINID_EMI_D11 STMP3XXX_PINID(3, 11)
-#define PINID_EMI_D12 STMP3XXX_PINID(3, 12)
-#define PINID_EMI_D13 STMP3XXX_PINID(3, 13)
-#define PINID_EMI_D14 STMP3XXX_PINID(3, 14)
-#define PINID_EMI_D15 STMP3XXX_PINID(3, 15)
-#define PINID_EMI_DQM0 STMP3XXX_PINID(3, 16)
-#define PINID_EMI_DQM1 STMP3XXX_PINID(3, 17)
-#define PINID_EMI_DQS0 STMP3XXX_PINID(3, 18)
-#define PINID_EMI_DQS1 STMP3XXX_PINID(3, 19)
-#define PINID_EMI_CLK STMP3XXX_PINID(3, 20)
-#define PINID_EMI_CLKN STMP3XXX_PINID(3, 21)
-
-#endif /* __ASM_ARCH_PINS_H */
+++ /dev/null
-/*
- * stmp378x: APBH register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef _MACH_REGS_APBH
-#define _MACH_REGS_APBH
-
-#define REGS_APBH_BASE (STMP3XXX_REGS_BASE + 0x4000)
-#define REGS_APBH_PHYS 0x80004000
-#define REGS_APBH_SIZE 0x2000
-
-#define HW_APBH_CTRL0 0x0
-#define BM_APBH_CTRL0_RESET_CHANNEL 0x00FF0000
-#define BP_APBH_CTRL0_RESET_CHANNEL 16
-#define BM_APBH_CTRL0_CLKGATE 0x40000000
-#define BM_APBH_CTRL0_SFTRST 0x80000000
-
-#define HW_APBH_CTRL1 0x10
-#define BM_APBH_CTRL1_CH0_CMDCMPLT_IRQ 0x00000001
-#define BP_APBH_CTRL1_CH0_CMDCMPLT_IRQ 0
-
-#define HW_APBH_CTRL2 0x20
-
-#define HW_APBH_DEVSEL 0x30
-
-#define HW_APBH_CH0_NXTCMDAR (0x50 + 0 * 0x70)
-#define HW_APBH_CH1_NXTCMDAR (0x50 + 1 * 0x70)
-#define HW_APBH_CH2_NXTCMDAR (0x50 + 2 * 0x70)
-#define HW_APBH_CH3_NXTCMDAR (0x50 + 3 * 0x70)
-#define HW_APBH_CH4_NXTCMDAR (0x50 + 4 * 0x70)
-#define HW_APBH_CH5_NXTCMDAR (0x50 + 5 * 0x70)
-#define HW_APBH_CH6_NXTCMDAR (0x50 + 6 * 0x70)
-#define HW_APBH_CH7_NXTCMDAR (0x50 + 7 * 0x70)
-#define HW_APBH_CH8_NXTCMDAR (0x50 + 8 * 0x70)
-#define HW_APBH_CH9_NXTCMDAR (0x50 + 9 * 0x70)
-#define HW_APBH_CH10_NXTCMDAR (0x50 + 10 * 0x70)
-#define HW_APBH_CH11_NXTCMDAR (0x50 + 11 * 0x70)
-#define HW_APBH_CH12_NXTCMDAR (0x50 + 12 * 0x70)
-#define HW_APBH_CH13_NXTCMDAR (0x50 + 13 * 0x70)
-#define HW_APBH_CH14_NXTCMDAR (0x50 + 14 * 0x70)
-#define HW_APBH_CH15_NXTCMDAR (0x50 + 15 * 0x70)
-
-#define HW_APBH_CHn_NXTCMDAR 0x50
-
-#define BV_APBH_CHn_CMD_COMMAND__NO_DMA_XFER 0
-#define BV_APBH_CHn_CMD_COMMAND__DMA_WRITE 1
-#define BV_APBH_CHn_CMD_COMMAND__DMA_READ 2
-#define BV_APBH_CHn_CMD_COMMAND__DMA_SENSE 3
-#define BM_APBH_CHn_CMD_COMMAND 0x00000003
-#define BP_APBH_CHn_CMD_COMMAND 0
-#define BM_APBH_CHn_CMD_CHAIN 0x00000004
-#define BM_APBH_CHn_CMD_IRQONCMPLT 0x00000008
-#define BM_APBH_CHn_CMD_NANDLOCK 0x00000010
-#define BM_APBH_CHn_CMD_NANDWAIT4READY 0x00000020
-#define BM_APBH_CHn_CMD_SEMAPHORE 0x00000040
-#define BM_APBH_CHn_CMD_WAIT4ENDCMD 0x00000080
-#define BM_APBH_CHn_CMD_CMDWORDS 0x0000F000
-#define BP_APBH_CHn_CMD_CMDWORDS 12
-#define BM_APBH_CHn_CMD_XFER_COUNT 0xFFFF0000
-#define BP_APBH_CHn_CMD_XFER_COUNT 16
-
-#define HW_APBH_CH0_SEMA (0x80 + 0 * 0x70)
-#define HW_APBH_CH1_SEMA (0x80 + 1 * 0x70)
-#define HW_APBH_CH2_SEMA (0x80 + 2 * 0x70)
-#define HW_APBH_CH3_SEMA (0x80 + 3 * 0x70)
-#define HW_APBH_CH4_SEMA (0x80 + 4 * 0x70)
-#define HW_APBH_CH5_SEMA (0x80 + 5 * 0x70)
-#define HW_APBH_CH6_SEMA (0x80 + 6 * 0x70)
-#define HW_APBH_CH7_SEMA (0x80 + 7 * 0x70)
-#define HW_APBH_CH8_SEMA (0x80 + 8 * 0x70)
-#define HW_APBH_CH9_SEMA (0x80 + 9 * 0x70)
-#define HW_APBH_CH10_SEMA (0x80 + 10 * 0x70)
-#define HW_APBH_CH11_SEMA (0x80 + 11 * 0x70)
-#define HW_APBH_CH12_SEMA (0x80 + 12 * 0x70)
-#define HW_APBH_CH13_SEMA (0x80 + 13 * 0x70)
-#define HW_APBH_CH14_SEMA (0x80 + 14 * 0x70)
-#define HW_APBH_CH15_SEMA (0x80 + 15 * 0x70)
-
-#define HW_APBH_CHn_SEMA 0x80
-#define BM_APBH_CHn_SEMA_INCREMENT_SEMA 0x000000FF
-#define BP_APBH_CHn_SEMA_INCREMENT_SEMA 0
-#define BM_APBH_CHn_SEMA_PHORE 0x00FF0000
-#define BP_APBH_CHn_SEMA_PHORE 16
-
-#endif
+++ /dev/null
-/*
- * stmp378x: APBX register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef _MACH_REGS_APBX
-#define _MACH_REGS_APBX
-
-#define REGS_APBX_BASE (STMP3XXX_REGS_BASE + 0x24000)
-#define REGS_APBX_PHYS 0x80024000
-#define REGS_APBX_SIZE 0x2000
-
-#define HW_APBX_CTRL0 0x0
-#define BM_APBX_CTRL0_CLKGATE 0x40000000
-#define BM_APBX_CTRL0_SFTRST 0x80000000
-
-#define HW_APBX_CTRL1 0x10
-
-#define HW_APBX_CTRL2 0x20
-
-#define HW_APBX_CHANNEL_CTRL 0x30
-#define BM_APBX_CHANNEL_CTRL_RESET_CHANNEL 0xFFFF0000
-#define BP_APBX_CHANNEL_CTRL_RESET_CHANNEL 16
-
-#define HW_APBX_DEVSEL 0x40
-
-#define HW_APBX_CH0_NXTCMDAR (0x110 + 0 * 0x70)
-#define HW_APBX_CH1_NXTCMDAR (0x110 + 1 * 0x70)
-#define HW_APBX_CH2_NXTCMDAR (0x110 + 2 * 0x70)
-#define HW_APBX_CH3_NXTCMDAR (0x110 + 3 * 0x70)
-#define HW_APBX_CH4_NXTCMDAR (0x110 + 4 * 0x70)
-#define HW_APBX_CH5_NXTCMDAR (0x110 + 5 * 0x70)
-#define HW_APBX_CH6_NXTCMDAR (0x110 + 6 * 0x70)
-#define HW_APBX_CH7_NXTCMDAR (0x110 + 7 * 0x70)
-#define HW_APBX_CH8_NXTCMDAR (0x110 + 8 * 0x70)
-#define HW_APBX_CH9_NXTCMDAR (0x110 + 9 * 0x70)
-#define HW_APBX_CH10_NXTCMDAR (0x110 + 10 * 0x70)
-#define HW_APBX_CH11_NXTCMDAR (0x110 + 11 * 0x70)
-#define HW_APBX_CH12_NXTCMDAR (0x110 + 12 * 0x70)
-#define HW_APBX_CH13_NXTCMDAR (0x110 + 13 * 0x70)
-#define HW_APBX_CH14_NXTCMDAR (0x110 + 14 * 0x70)
-#define HW_APBX_CH15_NXTCMDAR (0x110 + 15 * 0x70)
-
-#define HW_APBX_CHn_NXTCMDAR 0x110
-#define BM_APBX_CHn_CMD_COMMAND 0x00000003
-#define BP_APBX_CHn_CMD_COMMAND 0
-#define BV_APBX_CHn_CMD_COMMAND__NO_DMA_XFER 0
-#define BV_APBX_CHn_CMD_COMMAND__DMA_WRITE 1
-#define BV_APBX_CHn_CMD_COMMAND__DMA_READ 2
-#define BV_APBX_CHn_CMD_COMMAND__DMA_SENSE 3
-#define BM_APBX_CHn_CMD_CHAIN 0x00000004
-#define BM_APBX_CHn_CMD_IRQONCMPLT 0x00000008
-#define BM_APBX_CHn_CMD_SEMAPHORE 0x00000040
-#define BM_APBX_CHn_CMD_WAIT4ENDCMD 0x00000080
-#define BM_APBX_CHn_CMD_HALTONTERMINATE 0x00000100
-#define BM_APBX_CHn_CMD_CMDWORDS 0x0000F000
-#define BP_APBX_CHn_CMD_CMDWORDS 12
-#define BM_APBX_CHn_CMD_XFER_COUNT 0xFFFF0000
-#define BP_APBX_CHn_CMD_XFER_COUNT 16
-
-#define HW_APBX_CH0_BAR (0x130 + 0 * 0x70)
-#define HW_APBX_CH1_BAR (0x130 + 1 * 0x70)
-#define HW_APBX_CH2_BAR (0x130 + 2 * 0x70)
-#define HW_APBX_CH3_BAR (0x130 + 3 * 0x70)
-#define HW_APBX_CH4_BAR (0x130 + 4 * 0x70)
-#define HW_APBX_CH5_BAR (0x130 + 5 * 0x70)
-#define HW_APBX_CH6_BAR (0x130 + 6 * 0x70)
-#define HW_APBX_CH7_BAR (0x130 + 7 * 0x70)
-#define HW_APBX_CH8_BAR (0x130 + 8 * 0x70)
-#define HW_APBX_CH9_BAR (0x130 + 9 * 0x70)
-#define HW_APBX_CH10_BAR (0x130 + 10 * 0x70)
-#define HW_APBX_CH11_BAR (0x130 + 11 * 0x70)
-#define HW_APBX_CH12_BAR (0x130 + 12 * 0x70)
-#define HW_APBX_CH13_BAR (0x130 + 13 * 0x70)
-#define HW_APBX_CH14_BAR (0x130 + 14 * 0x70)
-#define HW_APBX_CH15_BAR (0x130 + 15 * 0x70)
-
-#define HW_APBX_CHn_BAR 0x130
-
-#define HW_APBX_CH0_SEMA (0x140 + 0 * 0x70)
-#define HW_APBX_CH1_SEMA (0x140 + 1 * 0x70)
-#define HW_APBX_CH2_SEMA (0x140 + 2 * 0x70)
-#define HW_APBX_CH3_SEMA (0x140 + 3 * 0x70)
-#define HW_APBX_CH4_SEMA (0x140 + 4 * 0x70)
-#define HW_APBX_CH5_SEMA (0x140 + 5 * 0x70)
-#define HW_APBX_CH6_SEMA (0x140 + 6 * 0x70)
-#define HW_APBX_CH7_SEMA (0x140 + 7 * 0x70)
-#define HW_APBX_CH8_SEMA (0x140 + 8 * 0x70)
-#define HW_APBX_CH9_SEMA (0x140 + 9 * 0x70)
-#define HW_APBX_CH10_SEMA (0x140 + 10 * 0x70)
-#define HW_APBX_CH11_SEMA (0x140 + 11 * 0x70)
-#define HW_APBX_CH12_SEMA (0x140 + 12 * 0x70)
-#define HW_APBX_CH13_SEMA (0x140 + 13 * 0x70)
-#define HW_APBX_CH14_SEMA (0x140 + 14 * 0x70)
-#define HW_APBX_CH15_SEMA (0x140 + 15 * 0x70)
-
-#define HW_APBX_CHn_SEMA 0x140
-#define BM_APBX_CHn_SEMA_INCREMENT_SEMA 0x000000FF
-#define BP_APBX_CHn_SEMA_INCREMENT_SEMA 0
-#define BM_APBX_CHn_SEMA_PHORE 0x00FF0000
-#define BP_APBX_CHn_SEMA_PHORE 16
-
-#endif
-
+++ /dev/null
-/*
- * stmp378x: AUDIOIN register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_AUDIOIN_BASE (STMP3XXX_REGS_BASE + 0x4C000)
-#define REGS_AUDIOIN_PHYS 0x8004C000
-#define REGS_AUDIOIN_SIZE 0x2000
-
-#define HW_AUDIOIN_CTRL 0x0
-#define BM_AUDIOIN_CTRL_RUN 0x00000001
-#define BP_AUDIOIN_CTRL_RUN 0
-#define BM_AUDIOIN_CTRL_FIFO_ERROR_IRQ_EN 0x00000002
-#define BM_AUDIOIN_CTRL_FIFO_OVERFLOW_IRQ 0x00000004
-#define BM_AUDIOIN_CTRL_FIFO_UNDERFLOW_IRQ 0x00000008
-#define BM_AUDIOIN_CTRL_WORD_LENGTH 0x00000020
-#define BM_AUDIOIN_CTRL_CLKGATE 0x40000000
-#define BM_AUDIOIN_CTRL_SFTRST 0x80000000
-
-#define HW_AUDIOIN_STAT 0x10
-
-#define HW_AUDIOIN_ADCSRR 0x20
-
-#define HW_AUDIOIN_ADCVOLUME 0x30
-#define BM_AUDIOIN_ADCVOLUME_VOLUME_RIGHT 0x000000FF
-#define BP_AUDIOIN_ADCVOLUME_VOLUME_RIGHT 0
-#define BM_AUDIOIN_ADCVOLUME_VOLUME_LEFT 0x00FF0000
-#define BP_AUDIOIN_ADCVOLUME_VOLUME_LEFT 16
-
-#define HW_AUDIOIN_ADCDEBUG 0x40
-
-#define HW_AUDIOIN_ADCVOL 0x50
-#define BM_AUDIOIN_ADCVOL_GAIN_RIGHT 0x0000000F
-#define BP_AUDIOIN_ADCVOL_GAIN_RIGHT 0
-#define BM_AUDIOIN_ADCVOL_SELECT_RIGHT 0x00000030
-#define BP_AUDIOIN_ADCVOL_SELECT_RIGHT 4
-#define BM_AUDIOIN_ADCVOL_GAIN_LEFT 0x00000F00
-#define BP_AUDIOIN_ADCVOL_GAIN_LEFT 8
-#define BM_AUDIOIN_ADCVOL_SELECT_LEFT 0x00003000
-#define BP_AUDIOIN_ADCVOL_SELECT_LEFT 12
-#define BM_AUDIOIN_ADCVOL_MUTE 0x01000000
-
-#define HW_AUDIOIN_MICLINE 0x60
-
-#define HW_AUDIOIN_ANACLKCTRL 0x70
-#define BM_AUDIOIN_ANACLKCTRL_CLKGATE 0x80000000
-
-#define HW_AUDIOIN_DATA 0x80
+++ /dev/null
-/*
- * stmp378x: AUDIOOUT register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_AUDIOOUT_BASE (STMP3XXX_REGS_BASE + 0x48000)
-#define REGS_AUDIOOUT_PHYS 0x80048000
-#define REGS_AUDIOOUT_SIZE 0x2000
-
-#define HW_AUDIOOUT_CTRL 0x0
-#define BM_AUDIOOUT_CTRL_RUN 0x00000001
-#define BP_AUDIOOUT_CTRL_RUN 0
-#define BM_AUDIOOUT_CTRL_FIFO_ERROR_IRQ_EN 0x00000002
-#define BM_AUDIOOUT_CTRL_FIFO_OVERFLOW_IRQ 0x00000004
-#define BM_AUDIOOUT_CTRL_FIFO_UNDERFLOW_IRQ 0x00000008
-#define BM_AUDIOOUT_CTRL_WORD_LENGTH 0x00000040
-#define BM_AUDIOOUT_CTRL_CLKGATE 0x40000000
-#define BM_AUDIOOUT_CTRL_SFTRST 0x80000000
-
-#define HW_AUDIOOUT_STAT 0x10
-
-#define HW_AUDIOOUT_DACSRR 0x20
-#define BM_AUDIOOUT_DACSRR_SRC_FRAC 0x00001FFF
-#define BP_AUDIOOUT_DACSRR_SRC_FRAC 0
-#define BM_AUDIOOUT_DACSRR_SRC_INT 0x001F0000
-#define BP_AUDIOOUT_DACSRR_SRC_INT 16
-#define BM_AUDIOOUT_DACSRR_SRC_HOLD 0x07000000
-#define BP_AUDIOOUT_DACSRR_SRC_HOLD 24
-#define BM_AUDIOOUT_DACSRR_BASEMULT 0x70000000
-#define BP_AUDIOOUT_DACSRR_BASEMULT 28
-
-#define HW_AUDIOOUT_DACVOLUME 0x30
-#define BM_AUDIOOUT_DACVOLUME_MUTE_RIGHT 0x00000100
-#define BM_AUDIOOUT_DACVOLUME_MUTE_LEFT 0x01000000
-#define BM_AUDIOOUT_DACVOLUME_EN_ZCD 0x02000000
-
-#define HW_AUDIOOUT_DACDEBUG 0x40
-
-#define HW_AUDIOOUT_HPVOL 0x50
-#define BM_AUDIOOUT_HPVOL_MUTE 0x01000000
-#define BM_AUDIOOUT_HPVOL_EN_MSTR_ZCD 0x02000000
-
-#define HW_AUDIOOUT_PWRDN 0x70
-#define BM_AUDIOOUT_PWRDN_HEADPHONE 0x00000001
-#define BP_AUDIOOUT_PWRDN_HEADPHONE 0
-#define BM_AUDIOOUT_PWRDN_CAPLESS 0x00000010
-#define BM_AUDIOOUT_PWRDN_ADC 0x00000100
-#define BM_AUDIOOUT_PWRDN_DAC 0x00001000
-#define BM_AUDIOOUT_PWRDN_RIGHT_ADC 0x00010000
-#define BM_AUDIOOUT_PWRDN_SPEAKER 0x01000000
-
-#define HW_AUDIOOUT_REFCTRL 0x80
-#define BM_AUDIOOUT_REFCTRL_VAG_VAL 0x000000F0
-#define BP_AUDIOOUT_REFCTRL_VAG_VAL 4
-#define BM_AUDIOOUT_REFCTRL_ADC_REFVAL 0x00000F00
-#define BP_AUDIOOUT_REFCTRL_ADC_REFVAL 8
-#define BM_AUDIOOUT_REFCTRL_ADJ_VAG 0x00001000
-#define BM_AUDIOOUT_REFCTRL_ADJ_ADC 0x00002000
-#define BM_AUDIOOUT_REFCTRL_BIAS_CTRL 0x00030000
-#define BP_AUDIOOUT_REFCTRL_BIAS_CTRL 16
-#define BM_AUDIOOUT_REFCTRL_LOW_PWR 0x00080000
-#define BM_AUDIOOUT_REFCTRL_VBG_ADJ 0x00700000
-#define BP_AUDIOOUT_REFCTRL_VBG_ADJ 20
-#define BM_AUDIOOUT_REFCTRL_XTAL_BGR_BIAS 0x01000000
-#define BM_AUDIOOUT_REFCTRL_RAISE_REF 0x02000000
-
-#define HW_AUDIOOUT_ANACTRL 0x90
-#define BM_AUDIOOUT_ANACTRL_HP_CLASSAB 0x00000010
-#define BM_AUDIOOUT_ANACTRL_HP_HOLD_GND 0x00000020
-
-#define HW_AUDIOOUT_TEST 0xA0
-#define BM_AUDIOOUT_TEST_HP_I1_ADJ 0x00C00000
-#define BP_AUDIOOUT_TEST_HP_I1_ADJ 22
-
-#define HW_AUDIOOUT_BISTCTRL 0xB0
-
-#define HW_AUDIOOUT_BISTSTAT0 0xC0
-
-#define HW_AUDIOOUT_BISTSTAT1 0xD0
-
-#define HW_AUDIOOUT_ANACLKCTRL 0xE0
-#define BM_AUDIOOUT_ANACLKCTRL_CLKGATE 0x80000000
-
-#define HW_AUDIOOUT_DATA 0xF0
-
-#define HW_AUDIOOUT_SPEAKERCTRL 0x100
-#define BM_AUDIOOUT_SPEAKERCTRL_MUTE 0x01000000
-
-#define HW_AUDIOOUT_VERSION 0x200
+++ /dev/null
-/*
- * stmp378x: BCH register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_BCH_BASE (STMP3XXX_REGS_BASE + 0xA000)
-#define REGS_BCH_PHYS 0x8000A000
-#define REGS_BCH_SIZE 0x2000
-
-#define HW_BCH_CTRL 0x0
-#define BM_BCH_CTRL_COMPLETE_IRQ 0x00000001
-#define BP_BCH_CTRL_COMPLETE_IRQ 0
-#define BM_BCH_CTRL_COMPLETE_IRQ_EN 0x00000100
-
-#define HW_BCH_STATUS0 0x10
-#define BM_BCH_STATUS0_UNCORRECTABLE 0x00000004
-#define BM_BCH_STATUS0_CORRECTED 0x00000008
-#define BM_BCH_STATUS0_STATUS_BLK0 0x0000FF00
-#define BP_BCH_STATUS0_STATUS_BLK0 8
-#define BM_BCH_STATUS0_COMPLETED_CE 0x000F0000
-#define BP_BCH_STATUS0_COMPLETED_CE 16
-
-#define HW_BCH_LAYOUTSELECT 0x70
-
-#define HW_BCH_FLASH0LAYOUT0 0x80
-#define BM_BCH_FLASH0LAYOUT0_DATA0_SIZE 0x00000FFF
-#define BP_BCH_FLASH0LAYOUT0_DATA0_SIZE 0
-#define BM_BCH_FLASH0LAYOUT0_ECC0 0x0000F000
-#define BP_BCH_FLASH0LAYOUT0_ECC0 12
-#define BM_BCH_FLASH0LAYOUT0_META_SIZE 0x00FF0000
-#define BP_BCH_FLASH0LAYOUT0_META_SIZE 16
-#define BM_BCH_FLASH0LAYOUT0_NBLOCKS 0xFF000000
-#define BP_BCH_FLASH0LAYOUT0_NBLOCKS 24
-#define BM_BCH_FLASH0LAYOUT1_DATAN_SIZE 0x00000FFF
-#define BP_BCH_FLASH0LAYOUT1_DATAN_SIZE 0
-#define BM_BCH_FLASH0LAYOUT1_ECCN 0x0000F000
-#define BP_BCH_FLASH0LAYOUT1_ECCN 12
-#define BM_BCH_FLASH0LAYOUT1_PAGE_SIZE 0xFFFF0000
-#define BP_BCH_FLASH0LAYOUT1_PAGE_SIZE 16
-
-#define HW_BCH_BLOCKNAME 0x150
+++ /dev/null
-/*
- * stmp378x: CLKCTRL register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef _MACH_REGS_CLKCTRL
-#define _MACH_REGS_CLKCTRL
-
-#define REGS_CLKCTRL_BASE (STMP3XXX_REGS_BASE + 0x40000)
-#define REGS_CLKCTRL_PHYS 0x80040000
-#define REGS_CLKCTRL_SIZE 0x2000
-
-#define HW_CLKCTRL_PLLCTRL0 0x0
-#define BM_CLKCTRL_PLLCTRL0_EN_USB_CLKS 0x00040000
-
-#define HW_CLKCTRL_CPU 0x20
-#define BM_CLKCTRL_CPU_DIV_CPU 0x0000003F
-#define BP_CLKCTRL_CPU_DIV_CPU 0
-
-#define HW_CLKCTRL_HBUS 0x30
-#define BM_CLKCTRL_HBUS_DIV 0x0000001F
-#define BP_CLKCTRL_HBUS_DIV 0
-#define BM_CLKCTRL_HBUS_DIV_FRAC_EN 0x00000020
-
-#define HW_CLKCTRL_XBUS 0x40
-
-#define HW_CLKCTRL_XTAL 0x50
-#define BM_CLKCTRL_XTAL_DRI_CLK24M_GATE 0x10000000
-
-#define HW_CLKCTRL_PIX 0x60
-#define BM_CLKCTRL_PIX_DIV 0x00000FFF
-#define BP_CLKCTRL_PIX_DIV 0
-#define BM_CLKCTRL_PIX_CLKGATE 0x80000000
-
-#define HW_CLKCTRL_SSP 0x70
-
-#define HW_CLKCTRL_GPMI 0x80
-
-#define HW_CLKCTRL_SPDIF 0x90
-
-#define HW_CLKCTRL_EMI 0xA0
-#define BM_CLKCTRL_EMI_DIV_EMI 0x0000003F
-#define BP_CLKCTRL_EMI_DIV_EMI 0
-#define BM_CLKCTRL_EMI_DCC_RESYNC_ENABLE 0x00010000
-#define BM_CLKCTRL_EMI_BUSY_DCC_RESYNC 0x00020000
-#define BM_CLKCTRL_EMI_BUSY_REF_EMI 0x10000000
-#define BM_CLKCTRL_EMI_BUSY_REF_XTAL 0x20000000
-
-#define HW_CLKCTRL_IR 0xB0
-
-#define HW_CLKCTRL_SAIF 0xC0
-
-#define HW_CLKCTRL_TV 0xD0
-
-#define HW_CLKCTRL_ETM 0xE0
-
-#define HW_CLKCTRL_FRAC 0xF0
-#define BM_CLKCTRL_FRAC_EMIFRAC 0x00003F00
-#define BP_CLKCTRL_FRAC_EMIFRAC 8
-#define BM_CLKCTRL_FRAC_PIXFRAC 0x003F0000
-#define BP_CLKCTRL_FRAC_PIXFRAC 16
-#define BM_CLKCTRL_FRAC_CLKGATEPIX 0x00800000
-
-#define HW_CLKCTRL_FRAC1 0x100
-
-#define HW_CLKCTRL_CLKSEQ 0x110
-#define BM_CLKCTRL_CLKSEQ_BYPASS_PIX 0x00000002
-
-#define HW_CLKCTRL_RESET 0x120
-#define BM_CLKCTRL_RESET_DIG 0x00000001
-#define BP_CLKCTRL_RESET_DIG 0
-
-#endif
+++ /dev/null
-/*
- * stmp378x: DCP register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_DCP_BASE (STMP3XXX_REGS_BASE + 0x28000)
-#define REGS_DCP_PHYS 0x80028000
-#define REGS_DCP_SIZE 0x2000
-
-#define HW_DCP_CTRL 0x0
-#define BM_DCP_CTRL_CHANNEL_INTERRUPT_ENABLE 0x000000FF
-#define BP_DCP_CTRL_CHANNEL_INTERRUPT_ENABLE 0
-#define BM_DCP_CTRL_ENABLE_CONTEXT_CACHING 0x00400000
-#define BM_DCP_CTRL_GATHER_RESIDUAL_WRITES 0x00800000
-#define BM_DCP_CTRL_CLKGATE 0x40000000
-#define BM_DCP_CTRL_SFTRST 0x80000000
-
-#define HW_DCP_STAT 0x10
-#define BM_DCP_STAT_IRQ 0x0000000F
-#define BP_DCP_STAT_IRQ 0
-
-#define HW_DCP_CHANNELCTRL 0x20
-#define BM_DCP_CHANNELCTRL_ENABLE_CHANNEL 0x000000FF
-#define BP_DCP_CHANNELCTRL_ENABLE_CHANNEL 0
-
-#define HW_DCP_CONTEXT 0x50
-#define BM_DCP_PACKET1_INTERRUPT 0x00000001
-#define BP_DCP_PACKET1_INTERRUPT 0
-#define BM_DCP_PACKET1_DECR_SEMAPHORE 0x00000002
-#define BM_DCP_PACKET1_CHAIN 0x00000004
-#define BM_DCP_PACKET1_CHAIN_CONTIGUOUS 0x00000008
-#define BM_DCP_PACKET1_ENABLE_CIPHER 0x00000020
-#define BM_DCP_PACKET1_ENABLE_HASH 0x00000040
-#define BM_DCP_PACKET1_CIPHER_ENCRYPT 0x00000100
-#define BM_DCP_PACKET1_CIPHER_INIT 0x00000200
-#define BM_DCP_PACKET1_OTP_KEY 0x00000400
-#define BM_DCP_PACKET1_PAYLOAD_KEY 0x00000800
-#define BM_DCP_PACKET1_HASH_INIT 0x00001000
-#define BM_DCP_PACKET1_HASH_TERM 0x00002000
-#define BM_DCP_PACKET2_CIPHER_SELECT 0x0000000F
-#define BP_DCP_PACKET2_CIPHER_SELECT 0
-#define BM_DCP_PACKET2_CIPHER_MODE 0x000000F0
-#define BP_DCP_PACKET2_CIPHER_MODE 4
-#define BM_DCP_PACKET2_KEY_SELECT 0x0000FF00
-#define BP_DCP_PACKET2_KEY_SELECT 8
-#define BM_DCP_PACKET2_HASH_SELECT 0x000F0000
-#define BP_DCP_PACKET2_HASH_SELECT 16
-#define BM_DCP_PACKET2_CIPHER_CFG 0xFF000000
-#define BP_DCP_PACKET2_CIPHER_CFG 24
-
-#define HW_DCP_CH0CMDPTR (0x100 + 0 * 0x40)
-#define HW_DCP_CH1CMDPTR (0x100 + 1 * 0x40)
-#define HW_DCP_CH2CMDPTR (0x100 + 2 * 0x40)
-#define HW_DCP_CH3CMDPTR (0x100 + 3 * 0x40)
-
-#define HW_DCP_CHnCMDPTR 0x100
-
-#define HW_DCP_CH0SEMA (0x110 + 0 * 0x40)
-#define HW_DCP_CH1SEMA (0x110 + 1 * 0x40)
-#define HW_DCP_CH2SEMA (0x110 + 2 * 0x40)
-#define HW_DCP_CH3SEMA (0x110 + 3 * 0x40)
-
-#define HW_DCP_CHnSEMA 0x110
-#define BM_DCP_CHnSEMA_INCREMENT 0x000000FF
-#define BP_DCP_CHnSEMA_INCREMENT 0
-
-#define HW_DCP_CH0STAT (0x120 + 0 * 0x40)
-#define HW_DCP_CH1STAT (0x120 + 1 * 0x40)
-#define HW_DCP_CH2STAT (0x120 + 2 * 0x40)
-#define HW_DCP_CH3STAT (0x120 + 3 * 0x40)
-
-#define HW_DCP_CHnSTAT 0x120
+++ /dev/null
-/*
- * stmp378x: DIGCTL register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_DIGCTL_BASE (STMP3XXX_REGS_BASE + 0x1C000)
-#define REGS_DIGCTL_PHYS 0x8001C000
-#define REGS_DIGCTL_SIZE 0x2000
-
-#define HW_DIGCTL_CTRL 0x0
-#define BM_DIGCTL_CTRL_USB_CLKGATE 0x00000004
-
-#define HW_DIGCTL_ARMCACHE 0x2B0
-#define BM_DIGCTL_ARMCACHE_ITAG_SS 0x00000003
-#define BP_DIGCTL_ARMCACHE_ITAG_SS 0
-#define BM_DIGCTL_ARMCACHE_DTAG_SS 0x00000030
-#define BP_DIGCTL_ARMCACHE_DTAG_SS 4
-#define BM_DIGCTL_ARMCACHE_CACHE_SS 0x00000300
-#define BP_DIGCTL_ARMCACHE_CACHE_SS 8
-#define BM_DIGCTL_ARMCACHE_DRTY_SS 0x00003000
-#define BP_DIGCTL_ARMCACHE_DRTY_SS 12
-#define BM_DIGCTL_ARMCACHE_VALID_SS 0x00030000
-#define BP_DIGCTL_ARMCACHE_VALID_SS 16
+++ /dev/null
-/*
- * stmp378x: DRAM register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_DRAM_BASE (STMP3XXX_REGS_BASE + 0xE0000)
-#define REGS_DRAM_PHYS 0x800E0000
-#define REGS_DRAM_SIZE 0x2000
-
-#define HW_DRAM_CTL06 0x18
-
-#define HW_DRAM_CTL08 0x20
+++ /dev/null
-/*
- * stmp378x: DRI register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_DRI_BASE (STMP3XXX_REGS_BASE + 0x74000)
-#define REGS_DRI_PHYS 0x80074000
-#define REGS_DRI_SIZE 0x2000
-
-#define HW_DRI_CTRL 0x0
-#define BM_DRI_CTRL_RUN 0x00000001
-#define BP_DRI_CTRL_RUN 0
-#define BM_DRI_CTRL_ATTENTION_IRQ 0x00000002
-#define BM_DRI_CTRL_PILOT_SYNC_LOSS_IRQ 0x00000004
-#define BM_DRI_CTRL_OVERFLOW_IRQ 0x00000008
-#define BM_DRI_CTRL_ATTENTION_IRQ_EN 0x00000200
-#define BM_DRI_CTRL_PILOT_SYNC_LOSS_IRQ_EN 0x00000400
-#define BM_DRI_CTRL_OVERFLOW_IRQ_EN 0x00000800
-#define BM_DRI_CTRL_REACQUIRE_PHASE 0x00008000
-#define BM_DRI_CTRL_STOP_ON_PILOT_ERROR 0x02000000
-#define BM_DRI_CTRL_STOP_ON_OFLOW_ERROR 0x04000000
-#define BM_DRI_CTRL_ENABLE_INPUTS 0x20000000
-#define BM_DRI_CTRL_CLKGATE 0x40000000
-#define BM_DRI_CTRL_SFTRST 0x80000000
-
-#define HW_DRI_TIMING 0x10
-#define BM_DRI_TIMING_GAP_DETECTION_INTERVAL 0x000000FF
-#define BP_DRI_TIMING_GAP_DETECTION_INTERVAL 0
-#define BM_DRI_TIMING_PILOT_REP_RATE 0x000F0000
-#define BP_DRI_TIMING_PILOT_REP_RATE 16
+++ /dev/null
-/*
- * stmp378x: ECC8 register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_ECC8_BASE (STMP3XXX_REGS_BASE + 0x8000)
-#define REGS_ECC8_PHYS 0x80008000
-#define REGS_ECC8_SIZE 0x2000
-
-#define HW_ECC8_CTRL 0x0
-#define BM_ECC8_CTRL_COMPLETE_IRQ 0x00000001
-#define BP_ECC8_CTRL_COMPLETE_IRQ 0
-#define BM_ECC8_CTRL_COMPLETE_IRQ_EN 0x00000100
-#define BM_ECC8_CTRL_AHBM_SFTRST 0x20000000
-
-#define HW_ECC8_STATUS0 0x10
-#define BM_ECC8_STATUS0_UNCORRECTABLE 0x00000004
-#define BM_ECC8_STATUS0_CORRECTED 0x00000008
-#define BM_ECC8_STATUS0_STATUS_AUX 0x00000F00
-#define BP_ECC8_STATUS0_STATUS_AUX 8
-#define BM_ECC8_STATUS0_COMPLETED_CE 0x000F0000
-#define BP_ECC8_STATUS0_COMPLETED_CE 16
-
-#define HW_ECC8_STATUS1 0x20
+++ /dev/null
-/*
- * stmp378x: EMI register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_EMI_BASE (STMP3XXX_REGS_BASE + 0x20000)
-#define REGS_EMI_PHYS 0x80020000
-#define REGS_EMI_SIZE 0x2000
-
-#define HW_EMI_STAT 0x10
+++ /dev/null
-/*
- * stmp378x: GPMI register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_GPMI_BASE (STMP3XXX_REGS_BASE + 0xC000)
-#define REGS_GPMI_PHYS 0x8000C000
-#define REGS_GPMI_SIZE 0x2000
-
-#define HW_GPMI_CTRL0 0x0
-#define BM_GPMI_CTRL0_XFER_COUNT 0x0000FFFF
-#define BP_GPMI_CTRL0_XFER_COUNT 0
-#define BM_GPMI_CTRL0_CS 0x00300000
-#define BP_GPMI_CTRL0_CS 20
-#define BM_GPMI_CTRL0_LOCK_CS 0x00400000
-#define BM_GPMI_CTRL0_WORD_LENGTH 0x00800000
-#define BM_GPMI_CTRL0_ADDRESS 0x000E0000
-#define BP_GPMI_CTRL0_ADDRESS 17
-#define BV_GPMI_CTRL0_ADDRESS__NAND_DATA 0x0
-#define BV_GPMI_CTRL0_ADDRESS__NAND_CLE 0x1
-#define BV_GPMI_CTRL0_ADDRESS__NAND_ALE 0x2
-#define BM_GPMI_CTRL0_ADDRESS_INCREMENT 0x00010000
-#define BM_GPMI_CTRL0_COMMAND_MODE 0x03000000
-#define BP_GPMI_CTRL0_COMMAND_MODE 24
-#define BV_GPMI_CTRL0_COMMAND_MODE__WRITE 0x0
-#define BV_GPMI_CTRL0_COMMAND_MODE__READ 0x1
-#define BV_GPMI_CTRL0_COMMAND_MODE__READ_AND_COMPARE 0x2
-#define BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY 0x3
-#define BM_GPMI_CTRL0_RUN 0x20000000
-#define BM_GPMI_CTRL0_CLKGATE 0x40000000
-#define BM_GPMI_CTRL0_SFTRST 0x80000000
-#define BM_GPMI_ECCCTRL_BUFFER_MASK 0x000001FF
-#define BP_GPMI_ECCCTRL_BUFFER_MASK 0
-#define BM_GPMI_ECCCTRL_ENABLE_ECC 0x00001000
-#define BM_GPMI_ECCCTRL_ECC_CMD 0x00006000
-#define BP_GPMI_ECCCTRL_ECC_CMD 13
-#define BV_GPMI_ECCCTRL_ECC_CMD__DECODE_4_BIT 0
-#define BV_GPMI_ECCCTRL_ECC_CMD__ENCODE_4_BIT 1
-#define BV_GPMI_ECCCTRL_ECC_CMD__DECODE_8_BIT 2
-#define BV_GPMI_ECCCTRL_ECC_CMD__ENCODE_8_BIT 3
-
-#define HW_GPMI_CTRL1 0x60
-#define BM_GPMI_CTRL1_GPMI_MODE 0x00000001
-#define BP_GPMI_CTRL1_GPMI_MODE 0
-#define BM_GPMI_CTRL1_ATA_IRQRDY_POLARITY 0x00000004
-#define BM_GPMI_CTRL1_DEV_RESET 0x00000008
-#define BM_GPMI_CTRL1_TIMEOUT_IRQ 0x00000200
-#define BM_GPMI_CTRL1_DEV_IRQ 0x00000400
-#define BM_GPMI_CTRL1_RDN_DELAY 0x0000F000
-#define BP_GPMI_CTRL1_RDN_DELAY 12
-#define BM_GPMI_CTRL1_BCH_MODE 0x00040000
-
-#define HW_GPMI_TIMING0 0x70
-#define BM_GPMI_TIMING0_DATA_SETUP 0x000000FF
-#define BP_GPMI_TIMING0_DATA_SETUP 0
-#define BM_GPMI_TIMING0_DATA_HOLD 0x0000FF00
-#define BP_GPMI_TIMING0_DATA_HOLD 8
-#define BM_GPMI_TIMING0_ADDRESS_SETUP 0x00FF0000
-#define BP_GPMI_TIMING0_ADDRESS_SETUP 16
-
-#define HW_GPMI_TIMING1 0x80
-#define BM_GPMI_TIMING1_DEVICE_BUSY_TIMEOUT 0xFFFF0000
-#define BP_GPMI_TIMING1_DEVICE_BUSY_TIMEOUT 16
+++ /dev/null
-/*
- * stmp378x: I2C register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_I2C_BASE (STMP3XXX_REGS_BASE + 0x58000)
-#define REGS_I2C_PHYS 0x80058000
-#define REGS_I2C_SIZE 0x2000
-
-#define HW_I2C_CTRL0 0x0
-#define BM_I2C_CTRL0_XFER_COUNT 0x0000FFFF
-#define BP_I2C_CTRL0_XFER_COUNT 0
-#define BM_I2C_CTRL0_DIRECTION 0x00010000
-#define BM_I2C_CTRL0_MASTER_MODE 0x00020000
-#define BM_I2C_CTRL0_PRE_SEND_START 0x00080000
-#define BM_I2C_CTRL0_POST_SEND_STOP 0x00100000
-#define BM_I2C_CTRL0_RETAIN_CLOCK 0x00200000
-#define BM_I2C_CTRL0_SEND_NAK_ON_LAST 0x02000000
-#define BM_I2C_CTRL0_CLKGATE 0x40000000
-#define BM_I2C_CTRL0_SFTRST 0x80000000
-
-#define HW_I2C_TIMING0 0x10
-
-#define HW_I2C_TIMING1 0x20
-
-#define HW_I2C_TIMING2 0x30
-
-#define HW_I2C_CTRL1 0x40
-#define BM_I2C_CTRL1_SLAVE_IRQ 0x00000001
-#define BP_I2C_CTRL1_SLAVE_IRQ 0
-#define BM_I2C_CTRL1_SLAVE_STOP_IRQ 0x00000002
-#define BM_I2C_CTRL1_MASTER_LOSS_IRQ 0x00000004
-#define BM_I2C_CTRL1_EARLY_TERM_IRQ 0x00000008
-#define BM_I2C_CTRL1_OVERSIZE_XFER_TERM_IRQ 0x00000010
-#define BM_I2C_CTRL1_NO_SLAVE_ACK_IRQ 0x00000020
-#define BM_I2C_CTRL1_DATA_ENGINE_CMPLT_IRQ 0x00000040
-#define BM_I2C_CTRL1_BUS_FREE_IRQ 0x00000080
-#define BM_I2C_CTRL1_CLR_GOT_A_NAK 0x10000000
-
-#define HW_I2C_VERSION 0x90
+++ /dev/null
-/*
- * stmp378x: ICOLL register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef _MACH_REGS_ICOLL
-#define _MACH_REGS_ICOLL
-
-#define REGS_ICOLL_BASE (STMP3XXX_REGS_BASE + 0x0)
-#define REGS_ICOLL_PHYS 0x80000000
-#define REGS_ICOLL_SIZE 0x2000
-
-#define HW_ICOLL_VECTOR 0x0
-
-#define HW_ICOLL_LEVELACK 0x10
-#define BM_ICOLL_LEVELACK_IRQLEVELACK 0x0000000F
-#define BP_ICOLL_LEVELACK_IRQLEVELACK 0
-
-#define HW_ICOLL_CTRL 0x20
-#define BM_ICOLL_CTRL_CLKGATE 0x40000000
-#define BM_ICOLL_CTRL_SFTRST 0x80000000
-
-#define HW_ICOLL_STAT 0x70
-
-#define HW_ICOLL_INTERRUPTn 0x120
-
-#define HW_ICOLL_INTERRUPTn 0x120
-#define BM_ICOLL_INTERRUPTn_ENABLE 0x00000004
-
-#endif
+++ /dev/null
-/*
- * stmp378x: IR register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_IR_BASE (STMP3XXX_REGS_BASE + 0x78000)
-#define REGS_IR_PHYS 0x80078000
-#define REGS_IR_SIZE 0x2000
+++ /dev/null
-/*
- * stmp378x: LCDIF register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_LCDIF_BASE (STMP3XXX_REGS_BASE + 0x30000)
-#define REGS_LCDIF_PHYS 0x80030000
-#define REGS_LCDIF_SIZE 0x2000
-
-#define HW_LCDIF_CTRL 0x0
-#define BM_LCDIF_CTRL_RUN 0x00000001
-#define BP_LCDIF_CTRL_RUN 0
-#define BM_LCDIF_CTRL_LCDIF_MASTER 0x00000020
-#define BM_LCDIF_CTRL_RGB_TO_YCBCR422_CSC 0x00000080
-#define BM_LCDIF_CTRL_WORD_LENGTH 0x00000300
-#define BP_LCDIF_CTRL_WORD_LENGTH 8
-#define BM_LCDIF_CTRL_LCD_DATABUS_WIDTH 0x00000C00
-#define BP_LCDIF_CTRL_LCD_DATABUS_WIDTH 10
-#define BM_LCDIF_CTRL_INPUT_DATA_SWIZZLE 0x0000C000
-#define BP_LCDIF_CTRL_INPUT_DATA_SWIZZLE 14
-#define BM_LCDIF_CTRL_DATA_SELECT 0x00010000
-#define BM_LCDIF_CTRL_DOTCLK_MODE 0x00020000
-#define BM_LCDIF_CTRL_VSYNC_MODE 0x00040000
-#define BM_LCDIF_CTRL_BYPASS_COUNT 0x00080000
-#define BM_LCDIF_CTRL_DVI_MODE 0x00100000
-#define BM_LCDIF_CTRL_SHIFT_NUM_BITS 0x03E00000
-#define BP_LCDIF_CTRL_SHIFT_NUM_BITS 21
-#define BM_LCDIF_CTRL_DATA_SHIFT_DIR 0x04000000
-#define BM_LCDIF_CTRL_WAIT_FOR_VSYNC_EDGE 0x08000000
-#define BM_LCDIF_CTRL_CLKGATE 0x40000000
-#define BM_LCDIF_CTRL_SFTRST 0x80000000
-
-#define HW_LCDIF_CTRL1 0x10
-#define BM_LCDIF_CTRL1_RESET 0x00000001
-#define BP_LCDIF_CTRL1_RESET 0
-#define BM_LCDIF_CTRL1_MODE86 0x00000002
-#define BM_LCDIF_CTRL1_BUSY_ENABLE 0x00000004
-#define BM_LCDIF_CTRL1_VSYNC_EDGE_IRQ 0x00000100
-#define BM_LCDIF_CTRL1_CUR_FRAME_DONE_IRQ 0x00000200
-#define BM_LCDIF_CTRL1_UNDERFLOW_IRQ 0x00000400
-#define BM_LCDIF_CTRL1_OVERFLOW_IRQ 0x00000800
-#define BM_LCDIF_CTRL1_VSYNC_EDGE_IRQ_EN 0x00001000
-#define BM_LCDIF_CTRL1_BYTE_PACKING_FORMAT 0x000F0000
-#define BP_LCDIF_CTRL1_BYTE_PACKING_FORMAT 16
-#define BM_LCDIF_CTRL1_INTERLACE_FIELDS 0x00800000
-#define BM_LCDIF_CTRL1_RECOVER_ON_UNDERFLOW 0x01000000
-
-#define HW_LCDIF_TRANSFER_COUNT 0x20
-#define BM_LCDIF_TRANSFER_COUNT_H_COUNT 0x0000FFFF
-#define BP_LCDIF_TRANSFER_COUNT_H_COUNT 0
-#define BM_LCDIF_TRANSFER_COUNT_V_COUNT 0xFFFF0000
-#define BP_LCDIF_TRANSFER_COUNT_V_COUNT 16
-
-#define HW_LCDIF_CUR_BUF 0x30
-
-#define HW_LCDIF_NEXT_BUF 0x40
-
-#define HW_LCDIF_TIMING 0x60
-
-#define HW_LCDIF_VDCTRL0 0x70
-#define BM_LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH 0x0003FFFF
-#define BP_LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH 0
-#define BM_LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH_UNIT 0x00100000
-#define BM_LCDIF_VDCTRL0_VSYNC_PERIOD_UNIT 0x00200000
-#define BM_LCDIF_VDCTRL0_ENABLE_POL 0x01000000
-#define BM_LCDIF_VDCTRL0_DOTCLK_POL 0x02000000
-#define BM_LCDIF_VDCTRL0_HSYNC_POL 0x04000000
-#define BM_LCDIF_VDCTRL0_VSYNC_POL 0x08000000
-#define BM_LCDIF_VDCTRL0_ENABLE_PRESENT 0x10000000
-#define BM_LCDIF_VDCTRL0_VSYNC_OEB 0x20000000
-
-#define HW_LCDIF_VDCTRL1 0x80
-#define BM_LCDIF_VDCTRL1_VSYNC_PERIOD 0xFFFFFFFF
-#define BP_LCDIF_VDCTRL1_VSYNC_PERIOD 0
-
-#define HW_LCDIF_VDCTRL2 0x90
-#define BM_LCDIF_VDCTRL2_HSYNC_PERIOD 0x0003FFFF
-#define BP_LCDIF_VDCTRL2_HSYNC_PERIOD 0
-#define BM_LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH 0xFF000000
-#define BP_LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH 24
-
-#define HW_LCDIF_VDCTRL3 0xA0
-#define BM_LCDIF_VDCTRL3_VERTICAL_WAIT_CNT 0x0000FFFF
-#define BP_LCDIF_VDCTRL3_VERTICAL_WAIT_CNT 0
-#define BM_LCDIF_VDCTRL3_HORIZONTAL_WAIT_CNT 0x0FFF0000
-#define BP_LCDIF_VDCTRL3_HORIZONTAL_WAIT_CNT 16
-
-#define HW_LCDIF_VDCTRL4 0xB0
-#define BM_LCDIF_VDCTRL4_DOTCLK_H_VALID_DATA_CNT 0x0003FFFF
-#define BP_LCDIF_VDCTRL4_DOTCLK_H_VALID_DATA_CNT 0
-#define BM_LCDIF_VDCTRL4_SYNC_SIGNALS_ON 0x00040000
-
-#define HW_LCDIF_DVICTRL0 0xC0
-#define BM_LCDIF_DVICTRL0_V_LINES_CNT 0x000003FF
-#define BP_LCDIF_DVICTRL0_V_LINES_CNT 0
-#define BM_LCDIF_DVICTRL0_H_BLANKING_CNT 0x000FFC00
-#define BP_LCDIF_DVICTRL0_H_BLANKING_CNT 10
-#define BM_LCDIF_DVICTRL0_H_ACTIVE_CNT 0x7FF00000
-#define BP_LCDIF_DVICTRL0_H_ACTIVE_CNT 20
-
-#define HW_LCDIF_DVICTRL1 0xD0
-#define BM_LCDIF_DVICTRL1_F2_START_LINE 0x000003FF
-#define BP_LCDIF_DVICTRL1_F2_START_LINE 0
-#define BM_LCDIF_DVICTRL1_F1_END_LINE 0x000FFC00
-#define BP_LCDIF_DVICTRL1_F1_END_LINE 10
-#define BM_LCDIF_DVICTRL1_F1_START_LINE 0x3FF00000
-#define BP_LCDIF_DVICTRL1_F1_START_LINE 20
-
-#define HW_LCDIF_DVICTRL2 0xE0
-#define BM_LCDIF_DVICTRL2_V1_BLANK_END_LINE 0x000003FF
-#define BP_LCDIF_DVICTRL2_V1_BLANK_END_LINE 0
-#define BM_LCDIF_DVICTRL2_V1_BLANK_START_LINE 0x000FFC00
-#define BP_LCDIF_DVICTRL2_V1_BLANK_START_LINE 10
-#define BM_LCDIF_DVICTRL2_F2_END_LINE 0x3FF00000
-#define BP_LCDIF_DVICTRL2_F2_END_LINE 20
-
-#define HW_LCDIF_DVICTRL3 0xF0
-#define BM_LCDIF_DVICTRL3_V2_BLANK_END_LINE 0x000003FF
-#define BP_LCDIF_DVICTRL3_V2_BLANK_END_LINE 0
-#define BM_LCDIF_DVICTRL3_V2_BLANK_START_LINE 0x03FF0000
-#define BP_LCDIF_DVICTRL3_V2_BLANK_START_LINE 16
-
-#define HW_LCDIF_DVICTRL4 0x100
-#define BM_LCDIF_DVICTRL4_H_FILL_CNT 0x000000FF
-#define BP_LCDIF_DVICTRL4_H_FILL_CNT 0
-#define BM_LCDIF_DVICTRL4_CR_FILL_VALUE 0x0000FF00
-#define BP_LCDIF_DVICTRL4_CR_FILL_VALUE 8
-#define BM_LCDIF_DVICTRL4_CB_FILL_VALUE 0x00FF0000
-#define BP_LCDIF_DVICTRL4_CB_FILL_VALUE 16
-#define BM_LCDIF_DVICTRL4_Y_FILL_VALUE 0xFF000000
-#define BP_LCDIF_DVICTRL4_Y_FILL_VALUE 24
-
-#define HW_LCDIF_CSC_COEFF0 0x110
-#define BM_LCDIF_CSC_COEFF0_CSC_SUBSAMPLE_FILTER 0x00000003
-#define BP_LCDIF_CSC_COEFF0_CSC_SUBSAMPLE_FILTER 0
-#define BM_LCDIF_CSC_COEFF0_C0 0x03FF0000
-#define BP_LCDIF_CSC_COEFF0_C0 16
-
-#define HW_LCDIF_CSC_COEFF1 0x120
-#define BM_LCDIF_CSC_COEFF1_C1 0x000003FF
-#define BP_LCDIF_CSC_COEFF1_C1 0
-#define BM_LCDIF_CSC_COEFF1_C2 0x03FF0000
-#define BP_LCDIF_CSC_COEFF1_C2 16
-
-#define HW_LCDIF_CSC_COEFF2 0x130
-#define BM_LCDIF_CSC_COEFF2_C3 0x000003FF
-#define BP_LCDIF_CSC_COEFF2_C3 0
-#define BM_LCDIF_CSC_COEFF2_C4 0x03FF0000
-#define BP_LCDIF_CSC_COEFF2_C4 16
-
-#define HW_LCDIF_CSC_COEFF3 0x140
-#define BM_LCDIF_CSC_COEFF3_C5 0x000003FF
-#define BP_LCDIF_CSC_COEFF3_C5 0
-#define BM_LCDIF_CSC_COEFF3_C6 0x03FF0000
-#define BP_LCDIF_CSC_COEFF3_C6 16
-
-#define HW_LCDIF_CSC_COEFF4 0x150
-#define BM_LCDIF_CSC_COEFF4_C7 0x000003FF
-#define BP_LCDIF_CSC_COEFF4_C7 0
-#define BM_LCDIF_CSC_COEFF4_C8 0x03FF0000
-#define BP_LCDIF_CSC_COEFF4_C8 16
-
-#define HW_LCDIF_CSC_OFFSET 0x160
-#define BM_LCDIF_CSC_OFFSET_Y_OFFSET 0x000001FF
-#define BP_LCDIF_CSC_OFFSET_Y_OFFSET 0
-#define BM_LCDIF_CSC_OFFSET_CBCR_OFFSET 0x01FF0000
-#define BP_LCDIF_CSC_OFFSET_CBCR_OFFSET 16
-
-#define HW_LCDIF_CSC_LIMIT 0x170
-#define BM_LCDIF_CSC_LIMIT_Y_MAX 0x000000FF
-#define BP_LCDIF_CSC_LIMIT_Y_MAX 0
-#define BM_LCDIF_CSC_LIMIT_Y_MIN 0x0000FF00
-#define BP_LCDIF_CSC_LIMIT_Y_MIN 8
-#define BM_LCDIF_CSC_LIMIT_CBCR_MAX 0x00FF0000
-#define BP_LCDIF_CSC_LIMIT_CBCR_MAX 16
-#define BM_LCDIF_CSC_LIMIT_CBCR_MIN 0xFF000000
-#define BP_LCDIF_CSC_LIMIT_CBCR_MIN 24
-
-#define HW_LCDIF_STAT 0x1D0
-#define BM_LCDIF_STAT_TXFIFO_EMPTY 0x04000000
+++ /dev/null
-/*
- * stmp378x: LRADC register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_LRADC_BASE (STMP3XXX_REGS_BASE + 0x50000)
-#define REGS_LRADC_PHYS 0x80050000
-#define REGS_LRADC_SIZE 0x2000
-
-#define HW_LRADC_CTRL0 0x0
-#define BM_LRADC_CTRL0_SCHEDULE 0x000000FF
-#define BP_LRADC_CTRL0_SCHEDULE 0
-#define BM_LRADC_CTRL0_XPLUS_ENABLE 0x00010000
-#define BM_LRADC_CTRL0_YPLUS_ENABLE 0x00020000
-#define BM_LRADC_CTRL0_XMINUS_ENABLE 0x00040000
-#define BM_LRADC_CTRL0_YMINUS_ENABLE 0x00080000
-#define BM_LRADC_CTRL0_TOUCH_DETECT_ENABLE 0x00100000
-#define BM_LRADC_CTRL0_ONCHIP_GROUNDREF 0x00200000
-#define BM_LRADC_CTRL0_CLKGATE 0x40000000
-#define BM_LRADC_CTRL0_SFTRST 0x80000000
-
-#define HW_LRADC_CTRL1 0x10
-#define BM_LRADC_CTRL1_LRADC0_IRQ 0x00000001
-#define BP_LRADC_CTRL1_LRADC0_IRQ 0
-#define BM_LRADC_CTRL1_LRADC5_IRQ 0x00000020
-#define BM_LRADC_CTRL1_LRADC6_IRQ 0x00000040
-#define BM_LRADC_CTRL1_TOUCH_DETECT_IRQ 0x00000100
-#define BM_LRADC_CTRL1_LRADC0_IRQ_EN 0x00010000
-#define BM_LRADC_CTRL1_LRADC5_IRQ_EN 0x00200000
-#define BM_LRADC_CTRL1_TOUCH_DETECT_IRQ_EN 0x01000000
-
-#define HW_LRADC_CTRL2 0x20
-#define BM_LRADC_CTRL2_BL_BRIGHTNESS 0x001F0000
-#define BP_LRADC_CTRL2_BL_BRIGHTNESS 16
-#define BM_LRADC_CTRL2_BL_MUX_SELECT 0x00200000
-#define BM_LRADC_CTRL2_BL_ENABLE 0x00400000
-#define BM_LRADC_CTRL2_DIVIDE_BY_TWO 0xFF000000
-#define BP_LRADC_CTRL2_DIVIDE_BY_TWO 24
-
-#define HW_LRADC_CTRL3 0x30
-#define BM_LRADC_CTRL3_CYCLE_TIME 0x00000300
-#define BP_LRADC_CTRL3_CYCLE_TIME 8
-
-#define HW_LRADC_STATUS 0x40
-#define BM_LRADC_STATUS_TOUCH_DETECT_RAW 0x00000001
-#define BP_LRADC_STATUS_TOUCH_DETECT_RAW 0
-
-#define HW_LRADC_CH0 (0x50 + 0 * 0x10)
-#define HW_LRADC_CH1 (0x50 + 1 * 0x10)
-#define HW_LRADC_CH2 (0x50 + 2 * 0x10)
-#define HW_LRADC_CH3 (0x50 + 3 * 0x10)
-#define HW_LRADC_CH4 (0x50 + 4 * 0x10)
-#define HW_LRADC_CH5 (0x50 + 5 * 0x10)
-#define HW_LRADC_CH6 (0x50 + 6 * 0x10)
-#define HW_LRADC_CH7 (0x50 + 7 * 0x10)
-
-#define HW_LRADC_CHn 0x50
-#define BM_LRADC_CHn_VALUE 0x0003FFFF
-#define BP_LRADC_CHn_VALUE 0
-#define BM_LRADC_CHn_NUM_SAMPLES 0x1F000000
-#define BP_LRADC_CHn_NUM_SAMPLES 24
-#define BM_LRADC_CHn_ACCUMULATE 0x20000000
-
-#define HW_LRADC_DELAY0 (0xD0 + 0 * 0x10)
-#define HW_LRADC_DELAY1 (0xD0 + 1 * 0x10)
-#define HW_LRADC_DELAY2 (0xD0 + 2 * 0x10)
-#define HW_LRADC_DELAY3 (0xD0 + 3 * 0x10)
-
-#define HW_LRADC_DELAYn 0xD0
-#define BM_LRADC_DELAYn_DELAY 0x000007FF
-#define BP_LRADC_DELAYn_DELAY 0
-#define BM_LRADC_DELAYn_LOOP_COUNT 0x0000F800
-#define BP_LRADC_DELAYn_LOOP_COUNT 11
-#define BM_LRADC_DELAYn_TRIGGER_DELAYS 0x000F0000
-#define BP_LRADC_DELAYn_TRIGGER_DELAYS 16
-#define BM_LRADC_DELAYn_KICK 0x00100000
-#define BM_LRADC_DELAYn_TRIGGER_LRADCS 0xFF000000
-#define BP_LRADC_DELAYn_TRIGGER_LRADCS 24
-
-#define HW_LRADC_CTRL4 0x140
-#define BM_LRADC_CTRL4_LRADC6SELECT 0x0F000000
-#define BP_LRADC_CTRL4_LRADC6SELECT 24
-#define BM_LRADC_CTRL4_LRADC7SELECT 0xF0000000
-#define BP_LRADC_CTRL4_LRADC7SELECT 28
+++ /dev/null
-/*
- * stmp378x: OCOTP register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_OCOTP_BASE (STMP3XXX_REGS_BASE + 0x2C000)
-#define REGS_OCOTP_PHYS 0x8002C000
-#define REGS_OCOTP_SIZE 0x2000
-
-#define HW_OCOTP_CTRL 0x0
-#define BM_OCOTP_CTRL_BUSY 0x00000100
-#define BM_OCOTP_CTRL_ERROR 0x00000200
-#define BM_OCOTP_CTRL_RD_BANK_OPEN 0x00001000
-#define BM_OCOTP_CTRL_RELOAD_SHADOWS 0x00002000
-#define BM_OCOTP_CTRL_WR_UNLOCK 0xFFFF0000
-#define BP_OCOTP_CTRL_WR_UNLOCK 16
-
-#define HW_OCOTP_DATA 0x10
-
-#define HW_OCOTP_CUST0 (0x20 + 0 * 0x10)
-#define HW_OCOTP_CUST1 (0x20 + 1 * 0x10)
-#define HW_OCOTP_CUST2 (0x20 + 2 * 0x10)
-#define HW_OCOTP_CUST3 (0x20 + 3 * 0x10)
-
-#define HW_OCOTP_CUSTn 0x20
+++ /dev/null
-/*
- * stmp378x: PINCTRL register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef _MACH_REGS_PINCTRL
-#define _MACH_REGS_PINCTRL
-
-#define REGS_PINCTRL_BASE (STMP3XXX_REGS_BASE + 0x18000)
-#define REGS_PINCTRL_PHYS 0x80018000
-#define REGS_PINCTRL_SIZE 0x2000
-
-#define HW_PINCTRL_MUXSEL0 0x100
-#define HW_PINCTRL_MUXSEL1 0x110
-#define HW_PINCTRL_MUXSEL2 0x120
-#define HW_PINCTRL_MUXSEL3 0x130
-#define HW_PINCTRL_MUXSEL4 0x140
-#define HW_PINCTRL_MUXSEL5 0x150
-#define HW_PINCTRL_MUXSEL6 0x160
-#define HW_PINCTRL_MUXSEL7 0x170
-
-#define HW_PINCTRL_DRIVE0 0x200
-#define HW_PINCTRL_DRIVE1 0x210
-#define HW_PINCTRL_DRIVE2 0x220
-#define HW_PINCTRL_DRIVE3 0x230
-#define HW_PINCTRL_DRIVE4 0x240
-#define HW_PINCTRL_DRIVE5 0x250
-#define HW_PINCTRL_DRIVE6 0x260
-#define HW_PINCTRL_DRIVE7 0x270
-#define HW_PINCTRL_DRIVE8 0x280
-#define HW_PINCTRL_DRIVE9 0x290
-#define HW_PINCTRL_DRIVE10 0x2A0
-#define HW_PINCTRL_DRIVE11 0x2B0
-#define HW_PINCTRL_DRIVE12 0x2C0
-#define HW_PINCTRL_DRIVE13 0x2D0
-#define HW_PINCTRL_DRIVE14 0x2E0
-
-#define HW_PINCTRL_PULL0 0x400
-#define HW_PINCTRL_PULL1 0x410
-#define HW_PINCTRL_PULL2 0x420
-#define HW_PINCTRL_PULL3 0x430
-
-#define HW_PINCTRL_DOUT0 0x500
-#define HW_PINCTRL_DOUT1 0x510
-#define HW_PINCTRL_DOUT2 0x520
-
-#define HW_PINCTRL_DIN0 0x600
-#define HW_PINCTRL_DIN1 0x610
-#define HW_PINCTRL_DIN2 0x620
-
-#define HW_PINCTRL_DOE0 0x700
-#define HW_PINCTRL_DOE1 0x710
-#define HW_PINCTRL_DOE2 0x720
-
-#define HW_PINCTRL_PIN2IRQ0 0x800
-#define HW_PINCTRL_PIN2IRQ1 0x810
-#define HW_PINCTRL_PIN2IRQ2 0x820
-
-#define HW_PINCTRL_IRQEN0 0x900
-#define HW_PINCTRL_IRQEN1 0x910
-#define HW_PINCTRL_IRQEN2 0x920
-
-#define HW_PINCTRL_IRQLEVEL0 0xA00
-#define HW_PINCTRL_IRQLEVEL1 0xA10
-#define HW_PINCTRL_IRQLEVEL2 0xA20
-
-#define HW_PINCTRL_IRQPOL0 0xB00
-#define HW_PINCTRL_IRQPOL1 0xB10
-#define HW_PINCTRL_IRQPOL2 0xB20
-
-#define HW_PINCTRL_IRQSTAT0 0xC00
-#define HW_PINCTRL_IRQSTAT1 0xC10
-#define HW_PINCTRL_IRQSTAT2 0xC20
-
-#endif
+++ /dev/null
-/*
- * stmp378x: POWER register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef _MACH_REGS_POWER
-#define _MACH_REGS_POWER
-
-#define REGS_POWER_BASE (STMP3XXX_REGS_BASE + 0x44000)
-#define REGS_POWER_PHYS 0x80044000
-#define REGS_POWER_SIZE 0x2000
-
-#define HW_POWER_CTRL 0x0
-#define BM_POWER_CTRL_ENIRQ_VDD5V_GT_VDDIO 0x00000001
-#define BP_POWER_CTRL_ENIRQ_VDD5V_GT_VDDIO 0
-#define BM_POWER_CTRL_ENIRQ_PSWITCH 0x00020000
-#define BM_POWER_CTRL_PSWITCH_IRQ 0x00100000
-#define BM_POWER_CTRL_CLKGATE 0x40000000
-
-#define HW_POWER_5VCTRL 0x10
-#define BM_POWER_5VCTRL_ENABLE_LINREG_ILIMIT 0x00000040
-
-#define HW_POWER_MINPWR 0x20
-
-#define HW_POWER_CHARGE 0x30
-
-#define HW_POWER_VDDDCTRL 0x40
-
-#define HW_POWER_VDDACTRL 0x50
-
-#define HW_POWER_VDDIOCTRL 0x60
-#define BM_POWER_VDDIOCTRL_TRG 0x0000001F
-#define BP_POWER_VDDIOCTRL_TRG 0
-
-#define HW_POWER_STS 0xC0
-#define BM_POWER_STS_VBUSVALID 0x00000002
-#define BM_POWER_STS_BVALID 0x00000004
-#define BM_POWER_STS_AVALID 0x00000008
-#define BM_POWER_STS_DC_OK 0x00000200
-
-#define HW_POWER_RESET 0x100
-
-#define HW_POWER_DEBUG 0x110
-#define BM_POWER_DEBUG_BVALIDPIOLOCK 0x00000002
-#define BM_POWER_DEBUG_AVALIDPIOLOCK 0x00000004
-#define BM_POWER_DEBUG_VBUSVALIDPIOLOCK 0x00000008
-
-#endif
+++ /dev/null
-/*
- * stmp378x: PWM register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_PWM_BASE (STMP3XXX_REGS_BASE + 0x64000)
-#define REGS_PWM_PHYS 0x80064000
-#define REGS_PWM_SIZE 0x2000
-
-#define HW_PWM_CTRL 0x0
-#define BM_PWM_CTRL_PWM2_ENABLE 0x00000004
-#define BM_PWM_CTRL_PWM2_ANA_CTRL_ENABLE 0x00000020
-
-#define HW_PWM_ACTIVE0 (0x10 + 0 * 0x20)
-#define HW_PWM_ACTIVE1 (0x10 + 1 * 0x20)
-#define HW_PWM_ACTIVE2 (0x10 + 2 * 0x20)
-#define HW_PWM_ACTIVE3 (0x10 + 3 * 0x20)
-
-#define HW_PWM_ACTIVEn 0x10
-#define BM_PWM_ACTIVEn_ACTIVE 0x0000FFFF
-#define BP_PWM_ACTIVEn_ACTIVE 0
-#define BM_PWM_ACTIVEn_INACTIVE 0xFFFF0000
-#define BP_PWM_ACTIVEn_INACTIVE 16
-
-#define HW_PWM_PERIOD0 (0x20 + 0 * 0x20)
-#define HW_PWM_PERIOD1 (0x20 + 1 * 0x20)
-#define HW_PWM_PERIOD2 (0x20 + 2 * 0x20)
-#define HW_PWM_PERIOD3 (0x20 + 3 * 0x20)
-
-#define HW_PWM_PERIODn 0x20
-#define BM_PWM_PERIODn_PERIOD 0x0000FFFF
-#define BP_PWM_PERIODn_PERIOD 0
-#define BM_PWM_PERIODn_ACTIVE_STATE 0x00030000
-#define BP_PWM_PERIODn_ACTIVE_STATE 16
-#define BM_PWM_PERIODn_INACTIVE_STATE 0x000C0000
-#define BP_PWM_PERIODn_INACTIVE_STATE 18
-#define BM_PWM_PERIODn_CDIV 0x00700000
-#define BP_PWM_PERIODn_CDIV 20
+++ /dev/null
-/*
- * stmp378x: PXP register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_PXP_BASE (STMP3XXX_REGS_BASE + 0x2A000)
-#define REGS_PXP_PHYS 0x8002A000
-#define REGS_PXP_SIZE 0x2000
-
-#define HW_PXP_CTRL 0x0
-#define BM_PXP_CTRL_ENABLE 0x00000001
-#define BP_PXP_CTRL_ENABLE 0
-#define BM_PXP_CTRL_IRQ_ENABLE 0x00000002
-#define BM_PXP_CTRL_OUTPUT_RGB_FORMAT 0x000000F0
-#define BP_PXP_CTRL_OUTPUT_RGB_FORMAT 4
-#define BM_PXP_CTRL_ROTATE 0x00000300
-#define BP_PXP_CTRL_ROTATE 8
-#define BM_PXP_CTRL_HFLIP 0x00000400
-#define BM_PXP_CTRL_VFLIP 0x00000800
-#define BM_PXP_CTRL_S0_FORMAT 0x0000F000
-#define BP_PXP_CTRL_S0_FORMAT 12
-#define BM_PXP_CTRL_SCALE 0x00040000
-#define BM_PXP_CTRL_CROP 0x00080000
-
-#define HW_PXP_STAT 0x10
-#define BM_PXP_STAT_IRQ 0x00000001
-#define BP_PXP_STAT_IRQ 0
-
-#define HW_PXP_RGBBUF 0x20
-
-#define HW_PXP_RGBSIZE 0x40
-#define BM_PXP_RGBSIZE_HEIGHT 0x00000FFF
-#define BP_PXP_RGBSIZE_HEIGHT 0
-#define BM_PXP_RGBSIZE_WIDTH 0x00FFF000
-#define BP_PXP_RGBSIZE_WIDTH 12
-
-#define HW_PXP_S0BUF 0x50
-
-#define HW_PXP_S0UBUF 0x60
-
-#define HW_PXP_S0VBUF 0x70
-
-#define HW_PXP_S0PARAM 0x80
-#define BM_PXP_S0PARAM_HEIGHT 0x000000FF
-#define BP_PXP_S0PARAM_HEIGHT 0
-#define BM_PXP_S0PARAM_WIDTH 0x0000FF00
-#define BP_PXP_S0PARAM_WIDTH 8
-#define BM_PXP_S0PARAM_YBASE 0x00FF0000
-#define BP_PXP_S0PARAM_YBASE 16
-#define BM_PXP_S0PARAM_XBASE 0xFF000000
-#define BP_PXP_S0PARAM_XBASE 24
-
-#define HW_PXP_S0BACKGROUND 0x90
-
-#define HW_PXP_S0CROP 0xA0
-#define BM_PXP_S0CROP_HEIGHT 0x000000FF
-#define BP_PXP_S0CROP_HEIGHT 0
-#define BM_PXP_S0CROP_WIDTH 0x0000FF00
-#define BP_PXP_S0CROP_WIDTH 8
-#define BM_PXP_S0CROP_YBASE 0x00FF0000
-#define BP_PXP_S0CROP_YBASE 16
-#define BM_PXP_S0CROP_XBASE 0xFF000000
-#define BP_PXP_S0CROP_XBASE 24
-
-#define HW_PXP_S0SCALE 0xB0
-#define BM_PXP_S0SCALE_XSCALE 0x00003FFF
-#define BP_PXP_S0SCALE_XSCALE 0
-#define BM_PXP_S0SCALE_YSCALE 0x3FFF0000
-#define BP_PXP_S0SCALE_YSCALE 16
-
-#define HW_PXP_CSCCOEFF0 0xD0
-
-#define HW_PXP_CSCCOEFF1 0xE0
-
-#define HW_PXP_CSCCOEFF2 0xF0
-
-#define HW_PXP_S0COLORKEYLOW 0x180
-
-#define HW_PXP_S0COLORKEYHIGH 0x190
-
-#define HW_PXP_OL0 (0x200 + 0 * 0x40)
-#define HW_PXP_OL1 (0x200 + 1 * 0x40)
-#define HW_PXP_OL2 (0x200 + 2 * 0x40)
-#define HW_PXP_OL3 (0x200 + 3 * 0x40)
-#define HW_PXP_OL4 (0x200 + 4 * 0x40)
-#define HW_PXP_OL5 (0x200 + 5 * 0x40)
-#define HW_PXP_OL6 (0x200 + 6 * 0x40)
-#define HW_PXP_OL7 (0x200 + 7 * 0x40)
-
-#define HW_PXP_OLn 0x200
-
-#define HW_PXP_OL0SIZE (0x210 + 0 * 0x40)
-#define HW_PXP_OL1SIZE (0x210 + 1 * 0x40)
-#define HW_PXP_OL2SIZE (0x210 + 2 * 0x40)
-#define HW_PXP_OL3SIZE (0x210 + 3 * 0x40)
-#define HW_PXP_OL4SIZE (0x210 + 4 * 0x40)
-#define HW_PXP_OL5SIZE (0x210 + 5 * 0x40)
-#define HW_PXP_OL6SIZE (0x210 + 6 * 0x40)
-#define HW_PXP_OL7SIZE (0x210 + 7 * 0x40)
-
-#define HW_PXP_OLnSIZE 0x210
-#define BM_PXP_OLnSIZE_HEIGHT 0x000000FF
-#define BP_PXP_OLnSIZE_HEIGHT 0
-#define BM_PXP_OLnSIZE_WIDTH 0x0000FF00
-#define BP_PXP_OLnSIZE_WIDTH 8
-
-#define HW_PXP_OL0PARAM (0x220 + 0 * 0x40)
-#define HW_PXP_OL1PARAM (0x220 + 1 * 0x40)
-#define HW_PXP_OL2PARAM (0x220 + 2 * 0x40)
-#define HW_PXP_OL3PARAM (0x220 + 3 * 0x40)
-#define HW_PXP_OL4PARAM (0x220 + 4 * 0x40)
-#define HW_PXP_OL5PARAM (0x220 + 5 * 0x40)
-#define HW_PXP_OL6PARAM (0x220 + 6 * 0x40)
-#define HW_PXP_OL7PARAM (0x220 + 7 * 0x40)
-
-#define HW_PXP_OLnPARAM 0x220
-#define BM_PXP_OLnPARAM_ENABLE 0x00000001
-#define BP_PXP_OLnPARAM_ENABLE 0
-#define BM_PXP_OLnPARAM_ALPHA_CNTL 0x00000006
-#define BP_PXP_OLnPARAM_ALPHA_CNTL 1
-#define BM_PXP_OLnPARAM_ENABLE_COLORKEY 0x00000008
-#define BM_PXP_OLnPARAM_FORMAT 0x000000F0
-#define BP_PXP_OLnPARAM_FORMAT 4
-#define BM_PXP_OLnPARAM_ALPHA 0x0000FF00
-#define BP_PXP_OLnPARAM_ALPHA 8
+++ /dev/null
-/*
- * stmp378x: RTC register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_RTC_BASE (STMP3XXX_REGS_BASE + 0x5C000)
-#define REGS_RTC_PHYS 0x8005C000
-#define REGS_RTC_SIZE 0x2000
-
-#define HW_RTC_CTRL 0x0
-#define BM_RTC_CTRL_ALARM_IRQ_EN 0x00000001
-#define BP_RTC_CTRL_ALARM_IRQ_EN 0
-#define BM_RTC_CTRL_ONEMSEC_IRQ_EN 0x00000002
-#define BM_RTC_CTRL_ALARM_IRQ 0x00000004
-#define BM_RTC_CTRL_ONEMSEC_IRQ 0x00000008
-#define BM_RTC_CTRL_WATCHDOGEN 0x00000010
-
-#define HW_RTC_STAT 0x10
-#define BM_RTC_STAT_NEW_REGS 0x0000FF00
-#define BP_RTC_STAT_NEW_REGS 8
-#define BM_RTC_STAT_STALE_REGS 0x00FF0000
-#define BP_RTC_STAT_STALE_REGS 16
-#define BM_RTC_STAT_RTC_PRESENT 0x80000000
-
-#define HW_RTC_SECONDS 0x30
-
-#define HW_RTC_ALARM 0x40
-
-#define HW_RTC_WATCHDOG 0x50
-
-#define HW_RTC_PERSISTENT0 0x60
-#define BM_RTC_PERSISTENT0_ALARM_WAKE_EN 0x00000002
-#define BM_RTC_PERSISTENT0_ALARM_EN 0x00000004
-#define BM_RTC_PERSISTENT0_XTAL24MHZ_PWRUP 0x00000010
-#define BM_RTC_PERSISTENT0_XTAL32KHZ_PWRUP 0x00000020
-#define BM_RTC_PERSISTENT0_ALARM_WAKE 0x00000080
-#define BM_RTC_PERSISTENT0_SPARE_ANALOG 0xFFFC0000
-#define BP_RTC_PERSISTENT0_SPARE_ANALOG 18
-
-#define HW_RTC_PERSISTENT1 0x70
-#define BM_RTC_PERSISTENT1_GENERAL 0xFFFFFFFF
-#define BP_RTC_PERSISTENT1_GENERAL 0
-
-#define HW_RTC_VERSION 0xD0
+++ /dev/null
-/*
- * stmp378x: SAIF register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_SAIF_SIZE 0x2000
+++ /dev/null
-/*
- * stmp378x: SPDIF register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_SPDIF_BASE (STMP3XXX_REGS_BASE + 0x54000)
-#define REGS_SPDIF_PHYS 0x80054000
-#define REGS_SPDIF_SIZE 0x2000
-
-#define HW_SPDIF_CTRL 0x0
-#define BM_SPDIF_CTRL_RUN 0x00000001
-#define BP_SPDIF_CTRL_RUN 0
-#define BM_SPDIF_CTRL_FIFO_ERROR_IRQ_EN 0x00000002
-#define BM_SPDIF_CTRL_FIFO_OVERFLOW_IRQ 0x00000004
-#define BM_SPDIF_CTRL_FIFO_UNDERFLOW_IRQ 0x00000008
-#define BM_SPDIF_CTRL_WORD_LENGTH 0x00000010
-#define BM_SPDIF_CTRL_CLKGATE 0x40000000
-#define BM_SPDIF_CTRL_SFTRST 0x80000000
-
-#define HW_SPDIF_STAT 0x10
-
-#define HW_SPDIF_FRAMECTRL 0x20
-
-#define HW_SPDIF_SRR 0x30
-#define BM_SPDIF_SRR_RATE 0x000FFFFF
-#define BP_SPDIF_SRR_RATE 0
-#define BM_SPDIF_SRR_BASEMULT 0x70000000
-#define BP_SPDIF_SRR_BASEMULT 28
-
-#define HW_SPDIF_DEBUG 0x40
-
-#define HW_SPDIF_DATA 0x50
-
-#define HW_SPDIF_VERSION 0x60
+++ /dev/null
-/*
- * stmp378x: SSP register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_SSP1_BASE (STMP3XXX_REGS_BASE + 0x10000)
-#define REGS_SSP1_PHYS 0x80010000
-#define REGS_SSP2_BASE (STMP3XXX_REGS_BASE + 0x34000)
-#define REGS_SSP2_PHYS 0x80034000
-#define REGS_SSP_SIZE 0x2000
-
-#define HW_SSP_CTRL0 0x0
-#define BM_SSP_CTRL0_XFER_COUNT 0x0000FFFF
-#define BP_SSP_CTRL0_XFER_COUNT 0
-#define BM_SSP_CTRL0_ENABLE 0x00010000
-#define BM_SSP_CTRL0_GET_RESP 0x00020000
-#define BM_SSP_CTRL0_LONG_RESP 0x00080000
-#define BM_SSP_CTRL0_WAIT_FOR_CMD 0x00100000
-#define BM_SSP_CTRL0_WAIT_FOR_IRQ 0x00200000
-#define BM_SSP_CTRL0_BUS_WIDTH 0x00C00000
-#define BP_SSP_CTRL0_BUS_WIDTH 22
-#define BM_SSP_CTRL0_DATA_XFER 0x01000000
-#define BM_SSP_CTRL0_READ 0x02000000
-#define BM_SSP_CTRL0_IGNORE_CRC 0x04000000
-#define BM_SSP_CTRL0_LOCK_CS 0x08000000
-#define BM_SSP_CTRL0_RUN 0x20000000
-#define BM_SSP_CTRL0_CLKGATE 0x40000000
-#define BM_SSP_CTRL0_SFTRST 0x80000000
-
-#define HW_SSP_CMD0 0x10
-#define BM_SSP_CMD0_CMD 0x000000FF
-#define BP_SSP_CMD0_CMD 0
-#define BM_SSP_CMD0_BLOCK_COUNT 0x0000FF00
-#define BP_SSP_CMD0_BLOCK_COUNT 8
-#define BM_SSP_CMD0_BLOCK_SIZE 0x000F0000
-#define BP_SSP_CMD0_BLOCK_SIZE 16
-#define BM_SSP_CMD0_APPEND_8CYC 0x00100000
-#define BM_SSP_CMD1_CMD_ARG 0xFFFFFFFF
-#define BP_SSP_CMD1_CMD_ARG 0
-
-#define HW_SSP_TIMING 0x50
-#define BM_SSP_TIMING_CLOCK_RATE 0x000000FF
-#define BP_SSP_TIMING_CLOCK_RATE 0
-#define BM_SSP_TIMING_CLOCK_DIVIDE 0x0000FF00
-#define BP_SSP_TIMING_CLOCK_DIVIDE 8
-#define BM_SSP_TIMING_TIMEOUT 0xFFFF0000
-#define BP_SSP_TIMING_TIMEOUT 16
-
-#define HW_SSP_CTRL1 0x60
-#define BM_SSP_CTRL1_SSP_MODE 0x0000000F
-#define BP_SSP_CTRL1_SSP_MODE 0
-#define BM_SSP_CTRL1_WORD_LENGTH 0x000000F0
-#define BP_SSP_CTRL1_WORD_LENGTH 4
-#define BM_SSP_CTRL1_POLARITY 0x00000200
-#define BM_SSP_CTRL1_PHASE 0x00000400
-#define BM_SSP_CTRL1_DMA_ENABLE 0x00002000
-#define BM_SSP_CTRL1_FIFO_OVERRUN_IRQ 0x00008000
-#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ_EN 0x00010000
-#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ 0x00020000
-#define BM_SSP_CTRL1_FIFO_UNDERRUN_IRQ 0x00200000
-#define BM_SSP_CTRL1_DATA_CRC_IRQ_EN 0x00400000
-#define BM_SSP_CTRL1_DATA_CRC_IRQ 0x00800000
-#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ_EN 0x01000000
-#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ 0x02000000
-#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ_EN 0x04000000
-#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ 0x08000000
-#define BM_SSP_CTRL1_RESP_ERR_IRQ_EN 0x10000000
-#define BM_SSP_CTRL1_RESP_ERR_IRQ 0x20000000
-#define BM_SSP_CTRL1_SDIO_IRQ 0x80000000
-
-#define HW_SSP_DATA 0x70
-
-#define HW_SSP_SDRESP0 0x80
-
-#define HW_SSP_SDRESP1 0x90
-
-#define HW_SSP_SDRESP2 0xA0
-
-#define HW_SSP_SDRESP3 0xB0
-
-#define HW_SSP_STATUS 0xC0
-#define BM_SSP_STATUS_FIFO_EMPTY 0x00000020
-#define BM_SSP_STATUS_TIMEOUT 0x00001000
-#define BM_SSP_STATUS_RESP_TIMEOUT 0x00004000
-#define BM_SSP_STATUS_RESP_ERR 0x00008000
-#define BM_SSP_STATUS_RESP_CRC_ERR 0x00010000
-#define BM_SSP_STATUS_CARD_DETECT 0x10000000
+++ /dev/null
-/*
- * stmp378x: SYDMA register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_SYDMA_BASE (STMP3XXX_REGS_BASE + 0x26000)
-#define REGS_SYDMA_PHYS 0x80026000
-#define REGS_SYDMA_SIZE 0x2000
+++ /dev/null
-/*
- * stmp378x: TIMROT register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef _MACH_REGS_TIMROT
-#define _MACH_REGS_TIMROT
-
-#define REGS_TIMROT_BASE (STMP3XXX_REGS_BASE + 0x68000)
-#define REGS_TIMROT_PHYS 0x80068000
-#define REGS_TIMROT_SIZE 0x2000
-
-#define HW_TIMROT_ROTCTRL 0x0
-#define BM_TIMROT_ROTCTRL_SELECT_A 0x00000007
-#define BP_TIMROT_ROTCTRL_SELECT_A 0
-#define BM_TIMROT_ROTCTRL_SELECT_B 0x00000070
-#define BP_TIMROT_ROTCTRL_SELECT_B 4
-#define BM_TIMROT_ROTCTRL_POLARITY_A 0x00000100
-#define BM_TIMROT_ROTCTRL_POLARITY_B 0x00000200
-#define BM_TIMROT_ROTCTRL_OVERSAMPLE 0x00000C00
-#define BP_TIMROT_ROTCTRL_OVERSAMPLE 10
-#define BM_TIMROT_ROTCTRL_RELATIVE 0x00001000
-#define BM_TIMROT_ROTCTRL_DIVIDER 0x003F0000
-#define BP_TIMROT_ROTCTRL_DIVIDER 16
-#define BM_TIMROT_ROTCTRL_ROTARY_PRESENT 0x20000000
-#define BM_TIMROT_ROTCTRL_CLKGATE 0x40000000
-#define BM_TIMROT_ROTCTRL_SFTRST 0x80000000
-
-#define HW_TIMROT_ROTCOUNT 0x10
-#define BM_TIMROT_ROTCOUNT_UPDOWN 0x0000FFFF
-#define BP_TIMROT_ROTCOUNT_UPDOWN 0
-
-#define HW_TIMROT_TIMCTRL0 (0x20 + 0 * 0x20)
-#define HW_TIMROT_TIMCTRL1 (0x20 + 1 * 0x20)
-#define HW_TIMROT_TIMCTRL2 (0x20 + 2 * 0x20)
-
-#define HW_TIMROT_TIMCTRLn 0x20
-#define BM_TIMROT_TIMCTRLn_SELECT 0x0000000F
-#define BP_TIMROT_TIMCTRLn_SELECT 0
-#define BM_TIMROT_TIMCTRLn_PRESCALE 0x00000030
-#define BP_TIMROT_TIMCTRLn_PRESCALE 4
-#define BM_TIMROT_TIMCTRLn_RELOAD 0x00000040
-#define BM_TIMROT_TIMCTRLn_UPDATE 0x00000080
-#define BM_TIMROT_TIMCTRLn_IRQ_EN 0x00004000
-#define BM_TIMROT_TIMCTRLn_IRQ 0x00008000
-
-#define HW_TIMROT_TIMCOUNT0 (0x30 + 0 * 0x20)
-#define HW_TIMROT_TIMCOUNT1 (0x30 + 1 * 0x20)
-#define HW_TIMROT_TIMCOUNT2 (0x30 + 2 * 0x20)
-
-#define HW_TIMROT_TIMCOUNTn 0x30
-
-#endif
+++ /dev/null
-/*
- * stmp378x: TVENC register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_TVENC_BASE (STMP3XXX_REGS_BASE + 0x38000)
-#define REGS_TVENC_PHYS 0x80038000
-#define REGS_TVENC_SIZE 0x2000
-
-#define HW_TVENC_CTRL 0x0
-#define BM_TVENC_CTRL_CLKGATE 0x40000000
-#define BM_TVENC_CTRL_SFTRST 0x80000000
-
-#define HW_TVENC_CONFIG 0x10
-#define BM_TVENC_CONFIG_ENCD_MODE 0x00000007
-#define BP_TVENC_CONFIG_ENCD_MODE 0
-#define BM_TVENC_CONFIG_SYNC_MODE 0x00000070
-#define BP_TVENC_CONFIG_SYNC_MODE 4
-#define BM_TVENC_CONFIG_FSYNC_PHS 0x00000200
-#define BM_TVENC_CONFIG_CGAIN 0x0000C000
-#define BP_TVENC_CONFIG_CGAIN 14
-#define BM_TVENC_CONFIG_YGAIN_SEL 0x00030000
-#define BP_TVENC_CONFIG_YGAIN_SEL 16
-#define BM_TVENC_CONFIG_PAL_SHAPE 0x00100000
-
-#define HW_TVENC_SYNCOFFSET 0x30
-
-#define HW_TVENC_COLORSUB0 0xC0
-
-#define HW_TVENC_COLORBURST 0x140
-#define BM_TVENC_COLORBURST_PBA 0x00FF0000
-#define BP_TVENC_COLORBURST_PBA 16
-#define BM_TVENC_COLORBURST_NBA 0xFF000000
-#define BP_TVENC_COLORBURST_NBA 24
-
-#define HW_TVENC_MACROVISION0 0x150
-
-#define HW_TVENC_MACROVISION1 0x160
-
-#define HW_TVENC_MACROVISION2 0x170
-
-#define HW_TVENC_MACROVISION3 0x180
-
-#define HW_TVENC_MACROVISION4 0x190
-
-#define HW_TVENC_DACCTRL 0x1A0
-#define BM_TVENC_DACCTRL_RVAL 0x00000070
-#define BP_TVENC_DACCTRL_RVAL 4
-#define BM_TVENC_DACCTRL_DUMP_TOVDD1 0x00000100
-#define BM_TVENC_DACCTRL_PWRUP1 0x00001000
-#define BM_TVENC_DACCTRL_GAINUP 0x00040000
-#define BM_TVENC_DACCTRL_GAINDN 0x00080000
+++ /dev/null
-/*
- * stmp378x: UARTAPP register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_UARTAPP1_BASE (STMP3XXX_REGS_BASE + 0x6C000)
-#define REGS_UARTAPP1_PHYS 0x8006C000
-#define REGS_UARTAPP2_BASE (STMP3XXX_REGS_BASE + 0x6E000)
-#define REGS_UARTAPP2_PHYS 0x8006E000
-#define REGS_UARTAPP_SIZE 0x2000
-
-#define HW_UARTAPP_CTRL0 0x0
-#define BM_UARTAPP_CTRL0_XFER_COUNT 0x0000FFFF
-#define BP_UARTAPP_CTRL0_XFER_COUNT 0
-#define BM_UARTAPP_CTRL0_RXTIMEOUT 0x07FF0000
-#define BP_UARTAPP_CTRL0_RXTIMEOUT 16
-#define BM_UARTAPP_CTRL0_RXTO_ENABLE 0x08000000
-#define BM_UARTAPP_CTRL0_RUN 0x20000000
-#define BM_UARTAPP_CTRL0_SFTRST 0x80000000
-#define BM_UARTAPP_CTRL1_XFER_COUNT 0x0000FFFF
-#define BP_UARTAPP_CTRL1_XFER_COUNT 0
-#define BM_UARTAPP_CTRL1_RUN 0x10000000
-
-#define HW_UARTAPP_CTRL2 0x20
-#define BM_UARTAPP_CTRL2_UARTEN 0x00000001
-#define BP_UARTAPP_CTRL2_UARTEN 0
-#define BM_UARTAPP_CTRL2_TXE 0x00000100
-#define BM_UARTAPP_CTRL2_RXE 0x00000200
-#define BM_UARTAPP_CTRL2_RTS 0x00000800
-#define BM_UARTAPP_CTRL2_RTSEN 0x00004000
-#define BM_UARTAPP_CTRL2_CTSEN 0x00008000
-#define BM_UARTAPP_CTRL2_RXDMAE 0x01000000
-#define BM_UARTAPP_CTRL2_TXDMAE 0x02000000
-#define BM_UARTAPP_CTRL2_DMAONERR 0x04000000
-
-#define HW_UARTAPP_LINECTRL 0x30
-#define BM_UARTAPP_LINECTRL_BRK 0x00000001
-#define BP_UARTAPP_LINECTRL_BRK 0
-#define BM_UARTAPP_LINECTRL_PEN 0x00000002
-#define BM_UARTAPP_LINECTRL_EPS 0x00000004
-#define BM_UARTAPP_LINECTRL_STP2 0x00000008
-#define BM_UARTAPP_LINECTRL_FEN 0x00000010
-#define BM_UARTAPP_LINECTRL_WLEN 0x00000060
-#define BP_UARTAPP_LINECTRL_WLEN 5
-#define BM_UARTAPP_LINECTRL_SPS 0x00000080
-#define BM_UARTAPP_LINECTRL_BAUD_DIVFRAC 0x00003F00
-#define BP_UARTAPP_LINECTRL_BAUD_DIVFRAC 8
-#define BM_UARTAPP_LINECTRL_BAUD_DIVINT 0xFFFF0000
-#define BP_UARTAPP_LINECTRL_BAUD_DIVINT 16
-
-#define HW_UARTAPP_INTR 0x50
-#define BM_UARTAPP_INTR_CTSMIS 0x00000002
-#define BM_UARTAPP_INTR_RTIS 0x00000040
-#define BM_UARTAPP_INTR_CTSMIEN 0x00020000
-#define BM_UARTAPP_INTR_RXIEN 0x00100000
-#define BM_UARTAPP_INTR_RTIEN 0x00400000
-
-#define HW_UARTAPP_DATA 0x60
-
-#define HW_UARTAPP_STAT 0x70
-#define BM_UARTAPP_STAT_RXCOUNT 0x0000FFFF
-#define BP_UARTAPP_STAT_RXCOUNT 0
-#define BM_UARTAPP_STAT_FERR 0x00010000
-#define BM_UARTAPP_STAT_PERR 0x00020000
-#define BM_UARTAPP_STAT_BERR 0x00040000
-#define BM_UARTAPP_STAT_OERR 0x00080000
-#define BM_UARTAPP_STAT_RXFE 0x01000000
-#define BM_UARTAPP_STAT_TXFF 0x02000000
-#define BM_UARTAPP_STAT_TXFE 0x08000000
-#define BM_UARTAPP_STAT_CTS 0x10000000
-
-#define HW_UARTAPP_VERSION 0x90
+++ /dev/null
-/*
- * stmp378x: UARTDBG register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_UARTDBG_BASE (STMP3XXX_REGS_BASE + 0x70000)
-#define REGS_UARTDBG_PHYS 0x80070000
-#define REGS_UARTDBG_SIZE 0x2000
-
-#define HW_UARTDBGDR 0x00000000
-#define BP_UARTDBGDR_UNAVAILABLE 16
-#define BM_UARTDBGDR_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGDR_UNAVAILABLE(v) \
- (((v) << 16) & BM_UARTDBGDR_UNAVAILABLE)
-#define BP_UARTDBGDR_RESERVED 12
-#define BM_UARTDBGDR_RESERVED 0x0000F000
-#define BF_UARTDBGDR_RESERVED(v) \
- (((v) << 12) & BM_UARTDBGDR_RESERVED)
-#define BM_UARTDBGDR_OE 0x00000800
-#define BM_UARTDBGDR_BE 0x00000400
-#define BM_UARTDBGDR_PE 0x00000200
-#define BM_UARTDBGDR_FE 0x00000100
-#define BP_UARTDBGDR_DATA 0
-#define BM_UARTDBGDR_DATA 0x000000FF
-#define BF_UARTDBGDR_DATA(v) \
- (((v) << 0) & BM_UARTDBGDR_DATA)
-#define HW_UARTDBGRSR_ECR 0x00000004
-#define BP_UARTDBGRSR_ECR_UNAVAILABLE 8
-#define BM_UARTDBGRSR_ECR_UNAVAILABLE 0xFFFFFF00
-#define BF_UARTDBGRSR_ECR_UNAVAILABLE(v) \
- (((v) << 8) & BM_UARTDBGRSR_ECR_UNAVAILABLE)
-#define BP_UARTDBGRSR_ECR_EC 4
-#define BM_UARTDBGRSR_ECR_EC 0x000000F0
-#define BF_UARTDBGRSR_ECR_EC(v) \
- (((v) << 4) & BM_UARTDBGRSR_ECR_EC)
-#define BM_UARTDBGRSR_ECR_OE 0x00000008
-#define BM_UARTDBGRSR_ECR_BE 0x00000004
-#define BM_UARTDBGRSR_ECR_PE 0x00000002
-#define BM_UARTDBGRSR_ECR_FE 0x00000001
-#define HW_UARTDBGFR 0x00000018
-#define BP_UARTDBGFR_UNAVAILABLE 16
-#define BM_UARTDBGFR_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGFR_UNAVAILABLE(v) \
- (((v) << 16) & BM_UARTDBGFR_UNAVAILABLE)
-#define BP_UARTDBGFR_RESERVED 9
-#define BM_UARTDBGFR_RESERVED 0x0000FE00
-#define BF_UARTDBGFR_RESERVED(v) \
- (((v) << 9) & BM_UARTDBGFR_RESERVED)
-#define BM_UARTDBGFR_RI 0x00000100
-#define BM_UARTDBGFR_TXFE 0x00000080
-#define BM_UARTDBGFR_RXFF 0x00000040
-#define BM_UARTDBGFR_TXFF 0x00000020
-#define BM_UARTDBGFR_RXFE 0x00000010
-#define BM_UARTDBGFR_BUSY 0x00000008
-#define BM_UARTDBGFR_DCD 0x00000004
-#define BM_UARTDBGFR_DSR 0x00000002
-#define BM_UARTDBGFR_CTS 0x00000001
-#define HW_UARTDBGILPR 0x00000020
-#define BP_UARTDBGILPR_UNAVAILABLE 8
-#define BM_UARTDBGILPR_UNAVAILABLE 0xFFFFFF00
-#define BF_UARTDBGILPR_UNAVAILABLE(v) \
- (((v) << 8) & BM_UARTDBGILPR_UNAVAILABLE)
-#define BP_UARTDBGILPR_ILPDVSR 0
-#define BM_UARTDBGILPR_ILPDVSR 0x000000FF
-#define BF_UARTDBGILPR_ILPDVSR(v) \
- (((v) << 0) & BM_UARTDBGILPR_ILPDVSR)
-#define HW_UARTDBGIBRD 0x00000024
-#define BP_UARTDBGIBRD_UNAVAILABLE 16
-#define BM_UARTDBGIBRD_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGIBRD_UNAVAILABLE(v) \
- (((v) << 16) & BM_UARTDBGIBRD_UNAVAILABLE)
-#define BP_UARTDBGIBRD_BAUD_DIVINT 0
-#define BM_UARTDBGIBRD_BAUD_DIVINT 0x0000FFFF
-#define BF_UARTDBGIBRD_BAUD_DIVINT(v) \
- (((v) << 0) & BM_UARTDBGIBRD_BAUD_DIVINT)
-#define HW_UARTDBGFBRD 0x00000028
-#define BP_UARTDBGFBRD_UNAVAILABLE 8
-#define BM_UARTDBGFBRD_UNAVAILABLE 0xFFFFFF00
-#define BF_UARTDBGFBRD_UNAVAILABLE(v) \
- (((v) << 8) & BM_UARTDBGFBRD_UNAVAILABLE)
-#define BP_UARTDBGFBRD_RESERVED 6
-#define BM_UARTDBGFBRD_RESERVED 0x000000C0
-#define BF_UARTDBGFBRD_RESERVED(v) \
- (((v) << 6) & BM_UARTDBGFBRD_RESERVED)
-#define BP_UARTDBGFBRD_BAUD_DIVFRAC 0
-#define BM_UARTDBGFBRD_BAUD_DIVFRAC 0x0000003F
-#define BF_UARTDBGFBRD_BAUD_DIVFRAC(v) \
- (((v) << 0) & BM_UARTDBGFBRD_BAUD_DIVFRAC)
-#define HW_UARTDBGLCR_H 0x0000002c
-#define BP_UARTDBGLCR_H_UNAVAILABLE 16
-#define BM_UARTDBGLCR_H_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGLCR_H_UNAVAILABLE(v) \
- (((v) << 16) & BM_UARTDBGLCR_H_UNAVAILABLE)
-#define BP_UARTDBGLCR_H_RESERVED 8
-#define BM_UARTDBGLCR_H_RESERVED 0x0000FF00
-#define BF_UARTDBGLCR_H_RESERVED(v) \
- (((v) << 8) & BM_UARTDBGLCR_H_RESERVED)
-#define BM_UARTDBGLCR_H_SPS 0x00000080
-#define BP_UARTDBGLCR_H_WLEN 5
-#define BM_UARTDBGLCR_H_WLEN 0x00000060
-#define BF_UARTDBGLCR_H_WLEN(v) \
- (((v) << 5) & BM_UARTDBGLCR_H_WLEN)
-#define BM_UARTDBGLCR_H_FEN 0x00000010
-#define BM_UARTDBGLCR_H_STP2 0x00000008
-#define BM_UARTDBGLCR_H_EPS 0x00000004
-#define BM_UARTDBGLCR_H_PEN 0x00000002
-#define BM_UARTDBGLCR_H_BRK 0x00000001
-#define HW_UARTDBGCR 0x00000030
-#define BP_UARTDBGCR_UNAVAILABLE 16
-#define BM_UARTDBGCR_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGCR_UNAVAILABLE(v) \
- (((v) << 16) & BM_UARTDBGCR_UNAVAILABLE)
-#define BM_UARTDBGCR_CTSEN 0x00008000
-#define BM_UARTDBGCR_RTSEN 0x00004000
-#define BM_UARTDBGCR_OUT2 0x00002000
-#define BM_UARTDBGCR_OUT1 0x00001000
-#define BM_UARTDBGCR_RTS 0x00000800
-#define BM_UARTDBGCR_DTR 0x00000400
-#define BM_UARTDBGCR_RXE 0x00000200
-#define BM_UARTDBGCR_TXE 0x00000100
-#define BM_UARTDBGCR_LBE 0x00000080
-#define BP_UARTDBGCR_RESERVED 3
-#define BM_UARTDBGCR_RESERVED 0x00000078
-#define BF_UARTDBGCR_RESERVED(v) \
- (((v) << 3) & BM_UARTDBGCR_RESERVED)
-#define BM_UARTDBGCR_SIRLP 0x00000004
-#define BM_UARTDBGCR_SIREN 0x00000002
-#define BM_UARTDBGCR_UARTEN 0x00000001
-#define HW_UARTDBGIFLS 0x00000034
-#define BP_UARTDBGIFLS_UNAVAILABLE 16
-#define BM_UARTDBGIFLS_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGIFLS_UNAVAILABLE(v) \
- (((v) << 16) & BM_UARTDBGIFLS_UNAVAILABLE)
-#define BP_UARTDBGIFLS_RESERVED 6
-#define BM_UARTDBGIFLS_RESERVED 0x0000FFC0
-#define BF_UARTDBGIFLS_RESERVED(v) \
- (((v) << 6) & BM_UARTDBGIFLS_RESERVED)
-#define BP_UARTDBGIFLS_RXIFLSEL 3
-#define BM_UARTDBGIFLS_RXIFLSEL 0x00000038
-#define BF_UARTDBGIFLS_RXIFLSEL(v) \
- (((v) << 3) & BM_UARTDBGIFLS_RXIFLSEL)
-#define BV_UARTDBGIFLS_RXIFLSEL__NOT_EMPTY 0x0
-#define BV_UARTDBGIFLS_RXIFLSEL__ONE_QUARTER 0x1
-#define BV_UARTDBGIFLS_RXIFLSEL__ONE_HALF 0x2
-#define BV_UARTDBGIFLS_RXIFLSEL__THREE_QUARTERS 0x3
-#define BV_UARTDBGIFLS_RXIFLSEL__SEVEN_EIGHTHS 0x4
-#define BV_UARTDBGIFLS_RXIFLSEL__INVALID5 0x5
-#define BV_UARTDBGIFLS_RXIFLSEL__INVALID6 0x6
-#define BV_UARTDBGIFLS_RXIFLSEL__INVALID7 0x7
-#define BP_UARTDBGIFLS_TXIFLSEL 0
-#define BM_UARTDBGIFLS_TXIFLSEL 0x00000007
-#define BF_UARTDBGIFLS_TXIFLSEL(v) \
- (((v) << 0) & BM_UARTDBGIFLS_TXIFLSEL)
-#define BV_UARTDBGIFLS_TXIFLSEL__EMPTY 0x0
-#define BV_UARTDBGIFLS_TXIFLSEL__ONE_QUARTER 0x1
-#define BV_UARTDBGIFLS_TXIFLSEL__ONE_HALF 0x2
-#define BV_UARTDBGIFLS_TXIFLSEL__THREE_QUARTERS 0x3
-#define BV_UARTDBGIFLS_TXIFLSEL__SEVEN_EIGHTHS 0x4
-#define BV_UARTDBGIFLS_TXIFLSEL__INVALID5 0x5
-#define BV_UARTDBGIFLS_TXIFLSEL__INVALID6 0x6
-#define BV_UARTDBGIFLS_TXIFLSEL__INVALID7 0x7
-#define HW_UARTDBGIMSC 0x00000038
-#define BP_UARTDBGIMSC_UNAVAILABLE 16
-#define BM_UARTDBGIMSC_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGIMSC_UNAVAILABLE(v) \
- (((v) << 16) & BM_UARTDBGIMSC_UNAVAILABLE)
-#define BP_UARTDBGIMSC_RESERVED 11
-#define BM_UARTDBGIMSC_RESERVED 0x0000F800
-#define BF_UARTDBGIMSC_RESERVED(v) \
- (((v) << 11) & BM_UARTDBGIMSC_RESERVED)
-#define BM_UARTDBGIMSC_OEIM 0x00000400
-#define BM_UARTDBGIMSC_BEIM 0x00000200
-#define BM_UARTDBGIMSC_PEIM 0x00000100
-#define BM_UARTDBGIMSC_FEIM 0x00000080
-#define BM_UARTDBGIMSC_RTIM 0x00000040
-#define BM_UARTDBGIMSC_TXIM 0x00000020
-#define BM_UARTDBGIMSC_RXIM 0x00000010
-#define BM_UARTDBGIMSC_DSRMIM 0x00000008
-#define BM_UARTDBGIMSC_DCDMIM 0x00000004
-#define BM_UARTDBGIMSC_CTSMIM 0x00000002
-#define BM_UARTDBGIMSC_RIMIM 0x00000001
-#define HW_UARTDBGRIS 0x0000003c
-#define BP_UARTDBGRIS_UNAVAILABLE 16
-#define BM_UARTDBGRIS_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGRIS_UNAVAILABLE(v) \
- (((v) << 16) & BM_UARTDBGRIS_UNAVAILABLE)
-#define BP_UARTDBGRIS_RESERVED 11
-#define BM_UARTDBGRIS_RESERVED 0x0000F800
-#define BF_UARTDBGRIS_RESERVED(v) \
- (((v) << 11) & BM_UARTDBGRIS_RESERVED)
-#define BM_UARTDBGRIS_OERIS 0x00000400
-#define BM_UARTDBGRIS_BERIS 0x00000200
-#define BM_UARTDBGRIS_PERIS 0x00000100
-#define BM_UARTDBGRIS_FERIS 0x00000080
-#define BM_UARTDBGRIS_RTRIS 0x00000040
-#define BM_UARTDBGRIS_TXRIS 0x00000020
-#define BM_UARTDBGRIS_RXRIS 0x00000010
-#define BM_UARTDBGRIS_DSRRMIS 0x00000008
-#define BM_UARTDBGRIS_DCDRMIS 0x00000004
-#define BM_UARTDBGRIS_CTSRMIS 0x00000002
-#define BM_UARTDBGRIS_RIRMIS 0x00000001
-#define HW_UARTDBGMIS 0x00000040
-#define BP_UARTDBGMIS_UNAVAILABLE 16
-#define BM_UARTDBGMIS_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGMIS_UNAVAILABLE(v) \
- (((v) << 16) & BM_UARTDBGMIS_UNAVAILABLE)
-#define BP_UARTDBGMIS_RESERVED 11
-#define BM_UARTDBGMIS_RESERVED 0x0000F800
-#define BF_UARTDBGMIS_RESERVED(v) \
- (((v) << 11) & BM_UARTDBGMIS_RESERVED)
-#define BM_UARTDBGMIS_OEMIS 0x00000400
-#define BM_UARTDBGMIS_BEMIS 0x00000200
-#define BM_UARTDBGMIS_PEMIS 0x00000100
-#define BM_UARTDBGMIS_FEMIS 0x00000080
-#define BM_UARTDBGMIS_RTMIS 0x00000040
-#define BM_UARTDBGMIS_TXMIS 0x00000020
-#define BM_UARTDBGMIS_RXMIS 0x00000010
-#define BM_UARTDBGMIS_DSRMMIS 0x00000008
-#define BM_UARTDBGMIS_DCDMMIS 0x00000004
-#define BM_UARTDBGMIS_CTSMMIS 0x00000002
-#define BM_UARTDBGMIS_RIMMIS 0x00000001
-#define HW_UARTDBGICR 0x00000044
-#define BP_UARTDBGICR_UNAVAILABLE 16
-#define BM_UARTDBGICR_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGICR_UNAVAILABLE(v) \
- (((v) << 16) & BM_UARTDBGICR_UNAVAILABLE)
-#define BP_UARTDBGICR_RESERVED 11
-#define BM_UARTDBGICR_RESERVED 0x0000F800
-#define BF_UARTDBGICR_RESERVED(v) \
- (((v) << 11) & BM_UARTDBGICR_RESERVED)
-#define BM_UARTDBGICR_OEIC 0x00000400
-#define BM_UARTDBGICR_BEIC 0x00000200
-#define BM_UARTDBGICR_PEIC 0x00000100
-#define BM_UARTDBGICR_FEIC 0x00000080
-#define BM_UARTDBGICR_RTIC 0x00000040
-#define BM_UARTDBGICR_TXIC 0x00000020
-#define BM_UARTDBGICR_RXIC 0x00000010
-#define BM_UARTDBGICR_DSRMIC 0x00000008
-#define BM_UARTDBGICR_DCDMIC 0x00000004
-#define BM_UARTDBGICR_CTSMIC 0x00000002
-#define BM_UARTDBGICR_RIMIC 0x00000001
-#define HW_UARTDBGDMACR 0x00000048
-#define BP_UARTDBGDMACR_UNAVAILABLE 16
-#define BM_UARTDBGDMACR_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGDMACR_UNAVAILABLE(v) \
- (((v) << 16) & BM_UARTDBGDMACR_UNAVAILABLE)
-#define BP_UARTDBGDMACR_RESERVED 3
-#define BM_UARTDBGDMACR_RESERVED 0x0000FFF8
-#define BF_UARTDBGDMACR_RESERVED(v) \
- (((v) << 3) & BM_UARTDBGDMACR_RESERVED)
-#define BM_UARTDBGDMACR_DMAONERR 0x00000004
-#define BM_UARTDBGDMACR_TXDMAE 0x00000002
-#define BM_UARTDBGDMACR_RXDMAE 0x00000001
+++ /dev/null
-/*
- * stmp378x: USBCTRL register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_USBCTRL_BASE (STMP3XXX_REGS_BASE + 0x80000)
-#define REGS_USBCTRL_PHYS 0x80080000
-#define REGS_USBCTRL_SIZE 0x2000
-
-#define HW_USBCTRL_USBCMD 0x140
-#define BM_USBCTRL_USBCMD_RS 0x00000001
-#define BP_USBCTRL_USBCMD_RS 0
-#define BM_USBCTRL_USBCMD_RST 0x00000002
-
-#define HW_USBCTRL_USBINTR 0x148
-#define BM_USBCTRL_USBINTR_UE 0x00000001
-#define BP_USBCTRL_USBINTR_UE 0
-
-#define HW_USBCTRL_PORTSC1 0x184
-#define BM_USBCTRL_PORTSC1_PHCD 0x00800000
-
-#define HW_USBCTRL_OTGSC 0x1A4
-#define BM_USBCTRL_OTGSC_ID 0x00000100
-#define BM_USBCTRL_OTGSC_IDIS 0x00010000
-#define BM_USBCTRL_OTGSC_IDIE 0x01000000
+++ /dev/null
-/*
- * stmp378x: USBPHY register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_USBPHY_BASE (STMP3XXX_REGS_BASE + 0x7C000)
-#define REGS_USBPHY_PHYS 0x8007C000
-#define REGS_USBPHY_SIZE 0x2000
-
-#define HW_USBPHY_PWD 0x0
-
-#define HW_USBPHY_CTRL 0x30
-#define BM_USBPHY_CTRL_ENHOSTDISCONDETECT 0x00000002
-#define BM_USBPHY_CTRL_ENDEVPLUGINDETECT 0x00000010
-#define BM_USBPHY_CTRL_ENOTGIDDETECT 0x00000080
-#define BM_USBPHY_CTRL_ENIRQDEVPLUGIN 0x00000800
-#define BM_USBPHY_CTRL_CLKGATE 0x40000000
-#define BM_USBPHY_CTRL_SFTRST 0x80000000
-
-#define HW_USBPHY_STATUS 0x40
-#define BM_USBPHY_STATUS_DEVPLUGIN_STATUS 0x00000040
-#define BM_USBPHY_STATUS_OTGID_STATUS 0x00000100
+++ /dev/null
-/*
- * Freescale STMP378X platform support
- *
- * Embedded Alley Solutions, Inc <source@embeddedalley.com>
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/dma-mapping.h>
-
-#include <asm/dma.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-
-#include <mach/pins.h>
-#include <mach/pinmux.h>
-#include <mach/dma.h>
-#include <mach/hardware.h>
-#include <mach/system.h>
-#include <mach/platform.h>
-#include <mach/stmp3xxx.h>
-#include <mach/regs-icoll.h>
-#include <mach/regs-apbh.h>
-#include <mach/regs-apbx.h>
-#include <mach/regs-pxp.h>
-#include <mach/regs-i2c.h>
-
-#include "stmp378x.h"
-/*
- * IRQ handling
- */
-static void stmp378x_ack_irq(struct irq_data *d)
-{
- /* Tell ICOLL to release IRQ line */
- __raw_writel(0, REGS_ICOLL_BASE + HW_ICOLL_VECTOR);
-
- /* ACK current interrupt */
- __raw_writel(0x01 /* BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0 */,
- REGS_ICOLL_BASE + HW_ICOLL_LEVELACK);
-
- /* Barrier */
- (void)__raw_readl(REGS_ICOLL_BASE + HW_ICOLL_STAT);
-}
-
-static void stmp378x_mask_irq(struct irq_data *d)
-{
- /* IRQ disable */
- stmp3xxx_clearl(BM_ICOLL_INTERRUPTn_ENABLE,
- REGS_ICOLL_BASE + HW_ICOLL_INTERRUPTn + d->irq * 0x10);
-}
-
-static void stmp378x_unmask_irq(struct irq_data *d)
-{
- /* IRQ enable */
- stmp3xxx_setl(BM_ICOLL_INTERRUPTn_ENABLE,
- REGS_ICOLL_BASE + HW_ICOLL_INTERRUPTn + d->irq * 0x10);
-}
-
-static struct irq_chip stmp378x_chip = {
- .irq_ack = stmp378x_ack_irq,
- .irq_mask = stmp378x_mask_irq,
- .irq_unmask = stmp378x_unmask_irq,
-};
-
-void __init stmp378x_init_irq(void)
-{
- stmp3xxx_init_irq(&stmp378x_chip);
-}
-
-/*
- * DMA interrupt handling
- */
-void stmp3xxx_arch_dma_enable_interrupt(int channel)
-{
- void __iomem *c1, *c2;
-
- switch (STMP3XXX_DMA_BUS(channel)) {
- case STMP3XXX_BUS_APBH:
- c1 = REGS_APBH_BASE + HW_APBH_CTRL1;
- c2 = REGS_APBH_BASE + HW_APBH_CTRL2;
- break;
-
- case STMP3XXX_BUS_APBX:
- c1 = REGS_APBX_BASE + HW_APBX_CTRL1;
- c2 = REGS_APBX_BASE + HW_APBX_CTRL2;
- break;
-
- default:
- return;
- }
- stmp3xxx_setl(1 << (16 + STMP3XXX_DMA_CHANNEL(channel)), c1);
- stmp3xxx_setl(1 << (16 + STMP3XXX_DMA_CHANNEL(channel)), c2);
-}
-EXPORT_SYMBOL(stmp3xxx_arch_dma_enable_interrupt);
-
-void stmp3xxx_arch_dma_clear_interrupt(int channel)
-{
- void __iomem *c1, *c2;
-
- switch (STMP3XXX_DMA_BUS(channel)) {
- case STMP3XXX_BUS_APBH:
- c1 = REGS_APBH_BASE + HW_APBH_CTRL1;
- c2 = REGS_APBH_BASE + HW_APBH_CTRL2;
- break;
-
- case STMP3XXX_BUS_APBX:
- c1 = REGS_APBX_BASE + HW_APBX_CTRL1;
- c2 = REGS_APBX_BASE + HW_APBX_CTRL2;
- break;
-
- default:
- return;
- }
- stmp3xxx_clearl(1 << STMP3XXX_DMA_CHANNEL(channel), c1);
- stmp3xxx_clearl(1 << STMP3XXX_DMA_CHANNEL(channel), c2);
-}
-EXPORT_SYMBOL(stmp3xxx_arch_dma_clear_interrupt);
-
-int stmp3xxx_arch_dma_is_interrupt(int channel)
-{
- int r = 0;
-
- switch (STMP3XXX_DMA_BUS(channel)) {
- case STMP3XXX_BUS_APBH:
- r = __raw_readl(REGS_APBH_BASE + HW_APBH_CTRL1) &
- (1 << STMP3XXX_DMA_CHANNEL(channel));
- break;
-
- case STMP3XXX_BUS_APBX:
- r = __raw_readl(REGS_APBX_BASE + HW_APBX_CTRL1) &
- (1 << STMP3XXX_DMA_CHANNEL(channel));
- break;
- }
- return r;
-}
-EXPORT_SYMBOL(stmp3xxx_arch_dma_is_interrupt);
-
-void stmp3xxx_arch_dma_reset_channel(int channel)
-{
- unsigned chbit = 1 << STMP3XXX_DMA_CHANNEL(channel);
- void __iomem *c0;
- u32 mask;
-
- switch (STMP3XXX_DMA_BUS(channel)) {
- case STMP3XXX_BUS_APBH:
- c0 = REGS_APBH_BASE + HW_APBH_CTRL0;
- mask = chbit << BP_APBH_CTRL0_RESET_CHANNEL;
- break;
- case STMP3XXX_BUS_APBX:
- c0 = REGS_APBX_BASE + HW_APBX_CHANNEL_CTRL;
- mask = chbit << BP_APBX_CHANNEL_CTRL_RESET_CHANNEL;
- break;
- default:
- return;
- }
-
- /* Reset channel and wait for it to complete */
- stmp3xxx_setl(mask, c0);
- while (__raw_readl(c0) & mask)
- cpu_relax();
-}
-EXPORT_SYMBOL(stmp3xxx_arch_dma_reset_channel);
-
-void stmp3xxx_arch_dma_freeze(int channel)
-{
- unsigned chbit = 1 << STMP3XXX_DMA_CHANNEL(channel);
- u32 mask = 1 << chbit;
-
- switch (STMP3XXX_DMA_BUS(channel)) {
- case STMP3XXX_BUS_APBH:
- stmp3xxx_setl(mask, REGS_APBH_BASE + HW_APBH_CTRL0);
- break;
- case STMP3XXX_BUS_APBX:
- stmp3xxx_setl(mask, REGS_APBX_BASE + HW_APBX_CHANNEL_CTRL);
- break;
- }
-}
-EXPORT_SYMBOL(stmp3xxx_arch_dma_freeze);
-
-void stmp3xxx_arch_dma_unfreeze(int channel)
-{
- unsigned chbit = 1 << STMP3XXX_DMA_CHANNEL(channel);
- u32 mask = 1 << chbit;
-
- switch (STMP3XXX_DMA_BUS(channel)) {
- case STMP3XXX_BUS_APBH:
- stmp3xxx_clearl(mask, REGS_APBH_BASE + HW_APBH_CTRL0);
- break;
- case STMP3XXX_BUS_APBX:
- stmp3xxx_clearl(mask, REGS_APBX_BASE + HW_APBX_CHANNEL_CTRL);
- break;
- }
-}
-EXPORT_SYMBOL(stmp3xxx_arch_dma_unfreeze);
-
-/*
- * The registers are all very closely mapped, so we might as well map them all
- * with a single mapping
- *
- * Logical Physical
- * f0000000 80000000 On-chip registers
- * f1000000 00000000 32k on-chip SRAM
- */
-
-static struct map_desc stmp378x_io_desc[] __initdata = {
- {
- .virtual = (u32)STMP3XXX_REGS_BASE,
- .pfn = __phys_to_pfn(STMP3XXX_REGS_PHBASE),
- .length = STMP3XXX_REGS_SIZE,
- .type = MT_DEVICE,
- },
- {
- .virtual = (u32)STMP3XXX_OCRAM_BASE,
- .pfn = __phys_to_pfn(STMP3XXX_OCRAM_PHBASE),
- .length = STMP3XXX_OCRAM_SIZE,
- .type = MT_DEVICE,
- },
-};
-
-
-static u64 common_dmamask = DMA_BIT_MASK(32);
-
-/*
- * devices that are present only on stmp378x, not on all 3xxx boards:
- * PxP
- * I2C
- */
-static struct resource pxp_resource[] = {
- {
- .flags = IORESOURCE_MEM,
- .start = REGS_PXP_PHYS,
- .end = REGS_PXP_PHYS + REGS_PXP_SIZE,
- }, {
- .flags = IORESOURCE_IRQ,
- .start = IRQ_PXP,
- .end = IRQ_PXP,
- },
-};
-
-struct platform_device stmp378x_pxp = {
- .name = "stmp3xxx-pxp",
- .id = -1,
- .dev = {
- .dma_mask = &common_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .num_resources = ARRAY_SIZE(pxp_resource),
- .resource = pxp_resource,
-};
-
-static struct resource i2c_resources[] = {
- {
- .flags = IORESOURCE_IRQ,
- .start = IRQ_I2C_ERROR,
- .end = IRQ_I2C_ERROR,
- }, {
- .flags = IORESOURCE_MEM,
- .start = REGS_I2C_PHYS,
- .end = REGS_I2C_PHYS + REGS_I2C_SIZE,
- }, {
- .flags = IORESOURCE_DMA,
- .start = STMP3XXX_DMA(3, STMP3XXX_BUS_APBX),
- .end = STMP3XXX_DMA(3, STMP3XXX_BUS_APBX),
- },
-};
-
-struct platform_device stmp378x_i2c = {
- .name = "i2c_stmp3xxx",
- .id = 0,
- .dev = {
- .dma_mask = &common_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = i2c_resources,
- .num_resources = ARRAY_SIZE(i2c_resources),
-};
-
-void __init stmp378x_map_io(void)
-{
- iotable_init(stmp378x_io_desc, ARRAY_SIZE(stmp378x_io_desc));
-}
+++ /dev/null
-/*
- * Freescale STMP37XX/STMP378X internal functions and data declarations
- *
- * Embedded Alley Solutions, Inc <source@embeddedalley.com>
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#ifndef __MACH_STMP378X_H
-#define __MACH_STMP378X_H
-
-void stmp378x_map_io(void);
-void stmp378x_init_irq(void);
-
-extern struct platform_device stmp378x_pxp, stmp378x_i2c;
-#endif /* __MACH_STMP378X_COMMON_H */
+++ /dev/null
-/*
- * Freescale STMP378X development board support
- *
- * Embedded Alley Solutions, Inc <source@embeddedalley.com>
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/spi/spi.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/pins.h>
-#include <mach/pinmux.h>
-#include <mach/platform.h>
-#include <mach/stmp3xxx.h>
-#include <mach/mmc.h>
-#include <mach/gpmi.h>
-
-#include "stmp378x.h"
-
-static struct platform_device *devices[] = {
- &stmp3xxx_dbguart,
- &stmp3xxx_appuart,
- &stmp3xxx_watchdog,
- &stmp3xxx_touchscreen,
- &stmp3xxx_rtc,
- &stmp3xxx_keyboard,
- &stmp3xxx_framebuffer,
- &stmp3xxx_backlight,
- &stmp3xxx_rotdec,
- &stmp3xxx_persistent,
- &stmp3xxx_dcp_bootstream,
- &stmp3xxx_dcp,
- &stmp3xxx_battery,
- &stmp378x_pxp,
- &stmp378x_i2c,
-};
-
-static struct pin_desc i2c_pins_desc[] = {
- { PINID_I2C_SCL, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
- { PINID_I2C_SDA, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
-};
-
-static struct pin_group i2c_pins = {
- .pins = i2c_pins_desc,
- .nr_pins = ARRAY_SIZE(i2c_pins_desc),
-};
-
-static struct pin_desc dbguart_pins_0[] = {
- { PINID_PWM0, PIN_FUN3, },
- { PINID_PWM1, PIN_FUN3, },
-};
-
-static struct pin_group dbguart_pins[] = {
- [0] = {
- .pins = dbguart_pins_0,
- .nr_pins = ARRAY_SIZE(dbguart_pins_0),
- },
-};
-
-static int dbguart_pins_control(int id, int request)
-{
- int r = 0;
-
- if (request)
- r = stmp3xxx_request_pin_group(&dbguart_pins[id], "debug uart");
- else
- stmp3xxx_release_pin_group(&dbguart_pins[id], "debug uart");
- return r;
-}
-
-static struct pin_desc appuart_pins_0[] = {
- { PINID_AUART1_CTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
- { PINID_AUART1_RTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
- { PINID_AUART1_RX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
- { PINID_AUART1_TX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
-};
-
-static struct pin_desc appuart_pins_1[] = {
-#if 0 /* enable these when second appuart will be connected */
- { PINID_AUART2_CTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
- { PINID_AUART2_RTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
- { PINID_AUART2_RX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
- { PINID_AUART2_TX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
-#endif
-};
-
-static struct pin_desc mmc_pins_desc[] = {
- { PINID_SSP1_DATA0, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 },
- { PINID_SSP1_DATA1, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 },
- { PINID_SSP1_DATA2, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 },
- { PINID_SSP1_DATA3, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 },
- { PINID_SSP1_CMD, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 },
- { PINID_SSP1_SCK, PIN_FUN1, PIN_8MA, PIN_3_3V, 0 },
- { PINID_SSP1_DETECT, PIN_FUN1, PIN_8MA, PIN_3_3V, 0 },
-};
-
-static struct pin_group mmc_pins = {
- .pins = mmc_pins_desc,
- .nr_pins = ARRAY_SIZE(mmc_pins_desc),
-};
-
-static int stmp3xxxmmc_get_wp(void)
-{
- return gpio_get_value(PINID_PWM4);
-}
-
-static int stmp3xxxmmc_hw_init_ssp1(void)
-{
- int ret;
-
- ret = stmp3xxx_request_pin_group(&mmc_pins, "mmc");
- if (ret)
- goto out;
-
- /* Configure write protect GPIO pin */
- ret = gpio_request(PINID_PWM4, "mmc wp");
- if (ret)
- goto out_wp;
-
- gpio_direction_input(PINID_PWM4);
-
- /* Configure POWER pin as gpio to drive power to MMC slot */
- ret = gpio_request(PINID_PWM3, "mmc power");
- if (ret)
- goto out_power;
-
- gpio_direction_output(PINID_PWM3, 0);
- mdelay(100);
-
- return 0;
-
-out_power:
- gpio_free(PINID_PWM4);
-out_wp:
- stmp3xxx_release_pin_group(&mmc_pins, "mmc");
-out:
- return ret;
-}
-
-static void stmp3xxxmmc_hw_release_ssp1(void)
-{
- gpio_free(PINID_PWM3);
- gpio_free(PINID_PWM4);
- stmp3xxx_release_pin_group(&mmc_pins, "mmc");
-}
-
-static void stmp3xxxmmc_cmd_pullup_ssp1(int enable)
-{
- stmp3xxx_pin_pullup(PINID_SSP1_CMD, enable, "mmc");
-}
-
-static unsigned long
-stmp3xxxmmc_setclock_ssp1(void __iomem *base, unsigned long hz)
-{
- struct clk *ssp, *parent;
- char *p;
- long r;
-
- ssp = clk_get(NULL, "ssp");
-
- /* using SSP1, no timeout, clock rate 1 */
- writel(BF(2, SSP_TIMING_CLOCK_DIVIDE) |
- BF(0xFFFF, SSP_TIMING_TIMEOUT),
- base + HW_SSP_TIMING);
-
- p = (hz > 1000000) ? "io" : "osc_24M";
- parent = clk_get(NULL, p);
- clk_set_parent(ssp, parent);
- r = clk_set_rate(ssp, 2 * hz / 1000);
- clk_put(parent);
- clk_put(ssp);
-
- return hz;
-}
-
-static struct stmp3xxxmmc_platform_data mmc_data = {
- .hw_init = stmp3xxxmmc_hw_init_ssp1,
- .hw_release = stmp3xxxmmc_hw_release_ssp1,
- .get_wp = stmp3xxxmmc_get_wp,
- .cmd_pullup = stmp3xxxmmc_cmd_pullup_ssp1,
- .setclock = stmp3xxxmmc_setclock_ssp1,
-};
-
-
-static struct pin_group appuart_pins[] = {
- [0] = {
- .pins = appuart_pins_0,
- .nr_pins = ARRAY_SIZE(appuart_pins_0),
- },
- [1] = {
- .pins = appuart_pins_1,
- .nr_pins = ARRAY_SIZE(appuart_pins_1),
- },
-};
-
-static struct pin_desc ssp1_pins_desc[] = {
- { PINID_SSP1_SCK, PIN_FUN1, PIN_8MA, PIN_3_3V, 0, },
- { PINID_SSP1_CMD, PIN_FUN1, PIN_4MA, PIN_3_3V, 0, },
- { PINID_SSP1_DATA0, PIN_FUN1, PIN_4MA, PIN_3_3V, 0, },
- { PINID_SSP1_DATA3, PIN_FUN1, PIN_4MA, PIN_3_3V, 0, },
-};
-
-static struct pin_desc ssp2_pins_desc[] = {
- { PINID_GPMI_WRN, PIN_FUN3, PIN_8MA, PIN_3_3V, 0, },
- { PINID_GPMI_RDY1, PIN_FUN3, PIN_4MA, PIN_3_3V, 0, },
- { PINID_GPMI_D00, PIN_FUN3, PIN_4MA, PIN_3_3V, 0, },
- { PINID_GPMI_D03, PIN_FUN3, PIN_4MA, PIN_3_3V, 0, },
-};
-
-static struct pin_group ssp1_pins = {
- .pins = ssp1_pins_desc,
- .nr_pins = ARRAY_SIZE(ssp1_pins_desc),
-};
-
-static struct pin_group ssp2_pins = {
- .pins = ssp1_pins_desc,
- .nr_pins = ARRAY_SIZE(ssp2_pins_desc),
-};
-
-static struct pin_desc gpmi_pins_desc[] = {
- { PINID_GPMI_CE0N, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
- { PINID_GPMI_CE1N, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
- { PINID_GMPI_CE2N, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
- { PINID_GPMI_CLE, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
- { PINID_GPMI_ALE, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
- { PINID_GPMI_WPN, PIN_FUN1, PIN_12MA, PIN_3_3V, 0 },
- { PINID_GPMI_RDY1, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
- { PINID_GPMI_D00, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
- { PINID_GPMI_D01, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
- { PINID_GPMI_D02, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
- { PINID_GPMI_D03, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
- { PINID_GPMI_D04, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
- { PINID_GPMI_D05, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
- { PINID_GPMI_D06, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
- { PINID_GPMI_D07, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
- { PINID_GPMI_RDY0, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
- { PINID_GPMI_RDY2, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
- { PINID_GPMI_RDY3, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
- { PINID_GPMI_WRN, PIN_FUN1, PIN_12MA, PIN_3_3V, 0 },
- { PINID_GPMI_RDN, PIN_FUN1, PIN_12MA, PIN_3_3V, 0 },
-};
-
-static struct pin_group gpmi_pins = {
- .pins = gpmi_pins_desc,
- .nr_pins = ARRAY_SIZE(gpmi_pins_desc),
-};
-
-static struct mtd_partition gpmi_partitions[] = {
- [0] = {
- .name = "boot",
- .size = 10 * SZ_1M,
- .offset = 0,
- },
- [1] = {
- .name = "data",
- .size = MTDPART_SIZ_FULL,
- .offset = MTDPART_OFS_APPEND,
- },
-};
-
-static struct gpmi_platform_data gpmi_data = {
- .pins = &gpmi_pins,
- .nr_parts = ARRAY_SIZE(gpmi_partitions),
- .parts = gpmi_partitions,
- .part_types = { "cmdline", NULL },
-};
-
-static struct spi_board_info spi_board_info[] __initdata = {
-#if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
- {
- .modalias = "enc28j60",
- .max_speed_hz = 6 * 1000 * 1000,
- .bus_num = 1,
- .chip_select = 0,
- .platform_data = NULL,
- },
-#endif
-};
-
-static void __init stmp378x_devb_init(void)
-{
- stmp3xxx_pinmux_init(NR_REAL_IRQS);
-
- /* init stmp3xxx platform */
- stmp3xxx_init();
-
- stmp3xxx_dbguart.dev.platform_data = dbguart_pins_control;
- stmp3xxx_appuart.dev.platform_data = appuart_pins;
- stmp3xxx_mmc.dev.platform_data = &mmc_data;
- stmp3xxx_gpmi.dev.platform_data = &gpmi_data;
- stmp3xxx_spi1.dev.platform_data = &ssp1_pins;
- stmp3xxx_spi2.dev.platform_data = &ssp2_pins;
- stmp378x_i2c.dev.platform_data = &i2c_pins;
-
- /* register spi devices */
- spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-
- /* add board's devices */
- platform_add_devices(devices, ARRAY_SIZE(devices));
-
- /* add devices selected by command line ssp1= and ssp2= options */
- stmp3xxx_ssp1_device_register();
- stmp3xxx_ssp2_device_register();
-}
-
-MACHINE_START(STMP378X, "STMP378X")
- .boot_params = 0x40000100,
- .map_io = stmp378x_map_io,
- .init_irq = stmp378x_init_irq,
- .timer = &stmp3xxx_timer,
- .init_machine = stmp378x_devb_init,
-MACHINE_END
+++ /dev/null
-obj-$(CONFIG_ARCH_STMP37XX) += stmp37xx.o
-obj-$(CONFIG_MACH_STMP37XX) += stmp37xx_devb.o
+++ /dev/null
- zreladdr-y := 0x40008000
-params_phys-y := 0x40000100
-initrd_phys-y := 0x40800000
+++ /dev/null
-/*
- * Low-level IRQ helper macros for Freescale STMP37XX
- *
- * Embedded Alley Solutions, Inc <source@embeddedalley.com>
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
- .macro disable_fiq
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
-
- mov \base, #0xf0000000 @ vm address of IRQ controller
- ldr \irqnr, [\base, #0x30] @ HW_ICOLL_STAT
- cmp \irqnr, #0x3f
- movne \irqstat, #0 @ Ack this IRQ
- strne \irqstat, [\base, #0x00]@ HW_ICOLL_VECTOR
- moveqs \irqnr, #0 @ Zero flag set for no IRQ
-
- .endm
-
- .macro get_irqnr_preamble, base, tmp
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
+++ /dev/null
-/*
- * Freescale STMP37XX interrupts
- *
- * Copyright (C) 2005 Sigmatel Inc
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#ifndef _ASM_ARCH_IRQS_H
-#define _ASM_ARCH_IRQS_H
-
-#define IRQ_DEBUG_UART 0
-#define IRQ_COMMS_RX 1
-#define IRQ_COMMS_TX 1
-#define IRQ_SSP2_ERROR 2
-#define IRQ_VDD5V 3
-#define IRQ_HEADPHONE_SHORT 4
-#define IRQ_DAC_DMA 5
-#define IRQ_DAC_ERROR 6
-#define IRQ_ADC_DMA 7
-#define IRQ_ADC_ERROR 8
-#define IRQ_SPDIF_DMA 9
-#define IRQ_SAIF2_DMA 9
-#define IRQ_SPDIF_ERROR 10
-#define IRQ_SAIF1_IRQ 10
-#define IRQ_SAIF2_IRQ 10
-#define IRQ_USB_CTRL 11
-#define IRQ_USB_WAKEUP 12
-#define IRQ_GPMI_DMA 13
-#define IRQ_SSP1_DMA 14
-#define IRQ_SSP_ERROR 15
-#define IRQ_GPIO0 16
-#define IRQ_GPIO1 17
-#define IRQ_GPIO2 18
-#define IRQ_SAIF1_DMA 19
-#define IRQ_SSP2_DMA 20
-#define IRQ_ECC8_IRQ 21
-#define IRQ_RTC_ALARM 22
-#define IRQ_UARTAPP_TX_DMA 23
-#define IRQ_UARTAPP_INTERNAL 24
-#define IRQ_UARTAPP_RX_DMA 25
-#define IRQ_I2C_DMA 26
-#define IRQ_I2C_ERROR 27
-#define IRQ_TIMER0 28
-#define IRQ_TIMER1 29
-#define IRQ_TIMER2 30
-#define IRQ_TIMER3 31
-#define IRQ_BATT_BRNOUT 32
-#define IRQ_VDDD_BRNOUT 33
-#define IRQ_VDDIO_BRNOUT 34
-#define IRQ_VDD18_BRNOUT 35
-#define IRQ_TOUCH_DETECT 36
-#define IRQ_LRADC_CH0 37
-#define IRQ_LRADC_CH1 38
-#define IRQ_LRADC_CH2 39
-#define IRQ_LRADC_CH3 40
-#define IRQ_LRADC_CH4 41
-#define IRQ_LRADC_CH5 42
-#define IRQ_LRADC_CH6 43
-#define IRQ_LRADC_CH7 44
-#define IRQ_LCDIF_DMA 45
-#define IRQ_LCDIF_ERROR 46
-#define IRQ_DIGCTL_DEBUG_TRAP 47
-#define IRQ_RTC_1MSEC 48
-#define IRQ_DRI_DMA 49
-#define IRQ_DRI_ATTENTION 50
-#define IRQ_GPMI_ATTENTION 51
-#define IRQ_IR 52
-#define IRQ_DCP_VMI 53
-#define IRQ_DCP 54
-#define IRQ_RESERVED_55 55
-#define IRQ_RESERVED_56 56
-#define IRQ_RESERVED_57 57
-#define IRQ_RESERVED_58 58
-#define IRQ_RESERVED_59 59
-#define SW_IRQ_60 60
-#define SW_IRQ_61 61
-#define SW_IRQ_62 62
-#define SW_IRQ_63 63
-
-#define NR_REAL_IRQS 64
-#define NR_IRQS (NR_REAL_IRQS + 32 * 3)
-
-/* TIMER and BRNOUT are FIQ capable */
-#define FIQ_START IRQ_TIMER0
-
-/* Hard disk IRQ is a GPMI attention IRQ */
-#define IRQ_HARDDISK IRQ_GPMI_ATTENTION
-
-#endif /* _ASM_ARCH_IRQS_H */
+++ /dev/null
-/*
- * Freescale STMP37XX SoC pin multiplexing
- *
- * Author: Vladislav Buzov <vbuzov@embeddedalley.com>
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#ifndef __ASM_ARCH_PINS_H
-#define __ASM_ARCH_PINS_H
-
-/*
- * Define all STMP37XX pins, a pin name corresponds to a STMP37xx hardware
- * interface this pin belongs to.
- */
-
-/* Bank 0 */
-#define PINID_GPMI_D00 STMP3XXX_PINID(0, 0)
-#define PINID_GPMI_D01 STMP3XXX_PINID(0, 1)
-#define PINID_GPMI_D02 STMP3XXX_PINID(0, 2)
-#define PINID_GPMI_D03 STMP3XXX_PINID(0, 3)
-#define PINID_GPMI_D04 STMP3XXX_PINID(0, 4)
-#define PINID_GPMI_D05 STMP3XXX_PINID(0, 5)
-#define PINID_GPMI_D06 STMP3XXX_PINID(0, 6)
-#define PINID_GPMI_D07 STMP3XXX_PINID(0, 7)
-#define PINID_GPMI_D08 STMP3XXX_PINID(0, 8)
-#define PINID_GPMI_D09 STMP3XXX_PINID(0, 9)
-#define PINID_GPMI_D10 STMP3XXX_PINID(0, 10)
-#define PINID_GPMI_D11 STMP3XXX_PINID(0, 11)
-#define PINID_GPMI_D12 STMP3XXX_PINID(0, 12)
-#define PINID_GPMI_D13 STMP3XXX_PINID(0, 13)
-#define PINID_GPMI_D14 STMP3XXX_PINID(0, 14)
-#define PINID_GPMI_D15 STMP3XXX_PINID(0, 15)
-#define PINID_GPMI_A0 STMP3XXX_PINID(0, 16)
-#define PINID_GPMI_A1 STMP3XXX_PINID(0, 17)
-#define PINID_GPMI_A2 STMP3XXX_PINID(0, 18)
-#define PINID_GPMI_RDY0 STMP3XXX_PINID(0, 19)
-#define PINID_GPMI_RDY2 STMP3XXX_PINID(0, 20)
-#define PINID_GPMI_RDY3 STMP3XXX_PINID(0, 21)
-#define PINID_GPMI_RESETN STMP3XXX_PINID(0, 22)
-#define PINID_GPMI_IRQ STMP3XXX_PINID(0, 23)
-#define PINID_GPMI_WRN STMP3XXX_PINID(0, 24)
-#define PINID_GPMI_RDN STMP3XXX_PINID(0, 25)
-#define PINID_UART2_CTS STMP3XXX_PINID(0, 26)
-#define PINID_UART2_RTS STMP3XXX_PINID(0, 27)
-#define PINID_UART2_RX STMP3XXX_PINID(0, 28)
-#define PINID_UART2_TX STMP3XXX_PINID(0, 29)
-
-/* Bank 1 */
-#define PINID_LCD_D00 STMP3XXX_PINID(1, 0)
-#define PINID_LCD_D01 STMP3XXX_PINID(1, 1)
-#define PINID_LCD_D02 STMP3XXX_PINID(1, 2)
-#define PINID_LCD_D03 STMP3XXX_PINID(1, 3)
-#define PINID_LCD_D04 STMP3XXX_PINID(1, 4)
-#define PINID_LCD_D05 STMP3XXX_PINID(1, 5)
-#define PINID_LCD_D06 STMP3XXX_PINID(1, 6)
-#define PINID_LCD_D07 STMP3XXX_PINID(1, 7)
-#define PINID_LCD_D08 STMP3XXX_PINID(1, 8)
-#define PINID_LCD_D09 STMP3XXX_PINID(1, 9)
-#define PINID_LCD_D10 STMP3XXX_PINID(1, 10)
-#define PINID_LCD_D11 STMP3XXX_PINID(1, 11)
-#define PINID_LCD_D12 STMP3XXX_PINID(1, 12)
-#define PINID_LCD_D13 STMP3XXX_PINID(1, 13)
-#define PINID_LCD_D14 STMP3XXX_PINID(1, 14)
-#define PINID_LCD_D15 STMP3XXX_PINID(1, 15)
-#define PINID_LCD_RESET STMP3XXX_PINID(1, 16)
-#define PINID_LCD_RS STMP3XXX_PINID(1, 17)
-#define PINID_LCD_WR_RWN STMP3XXX_PINID(1, 18)
-#define PINID_LCD_RD_E STMP3XXX_PINID(1, 19)
-#define PINID_LCD_CS STMP3XXX_PINID(1, 20)
-#define PINID_LCD_BUSY STMP3XXX_PINID(1, 21)
-#define PINID_SSP1_CMD STMP3XXX_PINID(1, 22)
-#define PINID_SSP1_SCK STMP3XXX_PINID(1, 23)
-#define PINID_SSP1_DATA0 STMP3XXX_PINID(1, 24)
-#define PINID_SSP1_DATA1 STMP3XXX_PINID(1, 25)
-#define PINID_SSP1_DATA2 STMP3XXX_PINID(1, 26)
-#define PINID_SSP1_DATA3 STMP3XXX_PINID(1, 27)
-#define PINID_SSP1_DETECT STMP3XXX_PINID(1, 28)
-
-/* Bank 2 */
-#define PINID_PWM0 STMP3XXX_PINID(2, 0)
-#define PINID_PWM1 STMP3XXX_PINID(2, 1)
-#define PINID_PWM2 STMP3XXX_PINID(2, 2)
-#define PINID_PWM3 STMP3XXX_PINID(2, 3)
-#define PINID_PWM4 STMP3XXX_PINID(2, 4)
-#define PINID_I2C_SCL STMP3XXX_PINID(2, 5)
-#define PINID_I2C_SDA STMP3XXX_PINID(2, 6)
-#define PINID_ROTTARYA STMP3XXX_PINID(2, 7)
-#define PINID_ROTTARYB STMP3XXX_PINID(2, 8)
-#define PINID_EMI_CKE STMP3XXX_PINID(2, 9)
-#define PINID_EMI_RASN STMP3XXX_PINID(2, 10)
-#define PINID_EMI_CASN STMP3XXX_PINID(2, 11)
-#define PINID_EMI_CE0N STMP3XXX_PINID(2, 12)
-#define PINID_EMI_CE1N STMP3XXX_PINID(2, 13)
-#define PINID_EMI_CE2N STMP3XXX_PINID(2, 14)
-#define PINID_EMI_CE3N STMP3XXX_PINID(2, 15)
-#define PINID_EMI_A00 STMP3XXX_PINID(2, 16)
-#define PINID_EMI_A01 STMP3XXX_PINID(2, 17)
-#define PINID_EMI_A02 STMP3XXX_PINID(2, 18)
-#define PINID_EMI_A03 STMP3XXX_PINID(2, 19)
-#define PINID_EMI_A04 STMP3XXX_PINID(2, 20)
-#define PINID_EMI_A05 STMP3XXX_PINID(2, 21)
-#define PINID_EMI_A06 STMP3XXX_PINID(2, 22)
-#define PINID_EMI_A07 STMP3XXX_PINID(2, 23)
-#define PINID_EMI_A08 STMP3XXX_PINID(2, 24)
-#define PINID_EMI_A09 STMP3XXX_PINID(2, 25)
-#define PINID_EMI_A10 STMP3XXX_PINID(2, 26)
-#define PINID_EMI_A11 STMP3XXX_PINID(2, 27)
-#define PINID_EMI_A12 STMP3XXX_PINID(2, 28)
-#define PINID_EMI_A13 STMP3XXX_PINID(2, 29)
-#define PINID_EMI_A14 STMP3XXX_PINID(2, 30)
-#define PINID_EMI_WEN STMP3XXX_PINID(2, 31)
-
-/* Bank 3 */
-#define PINID_EMI_D00 STMP3XXX_PINID(3, 0)
-#define PINID_EMI_D01 STMP3XXX_PINID(3, 1)
-#define PINID_EMI_D02 STMP3XXX_PINID(3, 2)
-#define PINID_EMI_D03 STMP3XXX_PINID(3, 3)
-#define PINID_EMI_D04 STMP3XXX_PINID(3, 4)
-#define PINID_EMI_D05 STMP3XXX_PINID(3, 5)
-#define PINID_EMI_D06 STMP3XXX_PINID(3, 6)
-#define PINID_EMI_D07 STMP3XXX_PINID(3, 7)
-#define PINID_EMI_D08 STMP3XXX_PINID(3, 8)
-#define PINID_EMI_D09 STMP3XXX_PINID(3, 9)
-#define PINID_EMI_D10 STMP3XXX_PINID(3, 10)
-#define PINID_EMI_D11 STMP3XXX_PINID(3, 11)
-#define PINID_EMI_D12 STMP3XXX_PINID(3, 12)
-#define PINID_EMI_D13 STMP3XXX_PINID(3, 13)
-#define PINID_EMI_D14 STMP3XXX_PINID(3, 14)
-#define PINID_EMI_D15 STMP3XXX_PINID(3, 15)
-#define PINID_EMI_DQS0 STMP3XXX_PINID(3, 16)
-#define PINID_EMI_DQS1 STMP3XXX_PINID(3, 17)
-#define PINID_EMI_DQM0 STMP3XXX_PINID(3, 18)
-#define PINID_EMI_DQM1 STMP3XXX_PINID(3, 19)
-#define PINID_EMI_CLK STMP3XXX_PINID(3, 20)
-#define PINID_EMI_CLKN STMP3XXX_PINID(3, 21)
-
-#endif /* __ASM_ARCH_PINS_H */
+++ /dev/null
-/*
- * stmp37xx: APBH register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef _MACH_REGS_APBH
-#define _MACH_REGS_APBH
-
-#define REGS_APBH_BASE (STMP3XXX_REGS_BASE + 0x4000)
-
-#define HW_APBH_CTRL0 0x0
-#define BM_APBH_CTRL0_RESET_CHANNEL 0x00FF0000
-#define BP_APBH_CTRL0_RESET_CHANNEL 16
-#define BM_APBH_CTRL0_CLKGATE 0x40000000
-#define BM_APBH_CTRL0_SFTRST 0x80000000
-
-#define HW_APBH_CTRL1 0x10
-#define BM_APBH_CTRL1_CH0_CMDCMPLT_IRQ 0x00000001
-#define BP_APBH_CTRL1_CH0_CMDCMPLT_IRQ 0
-
-#define HW_APBH_DEVSEL 0x20
-
-#define HW_APBH_CH0_NXTCMDAR (0x50 + 0 * 0x70)
-#define HW_APBH_CH1_NXTCMDAR (0x50 + 1 * 0x70)
-#define HW_APBH_CH2_NXTCMDAR (0x50 + 2 * 0x70)
-#define HW_APBH_CH3_NXTCMDAR (0x50 + 3 * 0x70)
-#define HW_APBH_CH4_NXTCMDAR (0x50 + 4 * 0x70)
-#define HW_APBH_CH5_NXTCMDAR (0x50 + 5 * 0x70)
-#define HW_APBH_CH6_NXTCMDAR (0x50 + 6 * 0x70)
-#define HW_APBH_CH7_NXTCMDAR (0x50 + 7 * 0x70)
-#define HW_APBH_CH8_NXTCMDAR (0x50 + 8 * 0x70)
-#define HW_APBH_CH9_NXTCMDAR (0x50 + 9 * 0x70)
-#define HW_APBH_CH10_NXTCMDAR (0x50 + 10 * 0x70)
-#define HW_APBH_CH11_NXTCMDAR (0x50 + 11 * 0x70)
-#define HW_APBH_CH12_NXTCMDAR (0x50 + 12 * 0x70)
-#define HW_APBH_CH13_NXTCMDAR (0x50 + 13 * 0x70)
-#define HW_APBH_CH14_NXTCMDAR (0x50 + 14 * 0x70)
-#define HW_APBH_CH15_NXTCMDAR (0x50 + 15 * 0x70)
-
-#define HW_APBH_CHn_NXTCMDAR 0x50
-
-#define BM_APBH_CHn_CMD_MODE 0x00000003
-#define BP_APBH_CHn_CMD_MODE 0x00000001
-#define BV_APBH_CHn_CMD_MODE_NOOP 0
-#define BV_APBH_CHn_CMD_MODE_WRITE 1
-#define BV_APBH_CHn_CMD_MODE_READ 2
-#define BV_APBH_CHn_CMD_MODE_SENSE 3
-#define BM_APBH_CHn_CMD_CHAIN 0x00000004
-#define BM_APBH_CHn_CMD_IRQONCMPLT 0x00000008
-#define BM_APBH_CHn_CMD_NANDLOCK 0x00000010
-#define BM_APBH_CHn_CMD_NANDWAIT4READY 0x00000020
-#define BM_APBH_CHn_CMD_SEMAPHORE 0x00000040
-#define BM_APBH_CHn_CMD_WAIT4ENDCMD 0x00000080
-#define BM_APBH_CHn_CMD_CMDWORDS 0x0000F000
-#define BP_APBH_CHn_CMD_CMDWORDS 12
-#define BM_APBH_CHn_CMD_XFER_COUNT 0xFFFF0000
-#define BP_APBH_CHn_CMD_XFER_COUNT 16
-
-#define HW_APBH_CH0_SEMA (0x80 + 0 * 0x70)
-#define HW_APBH_CH1_SEMA (0x80 + 1 * 0x70)
-#define HW_APBH_CH2_SEMA (0x80 + 2 * 0x70)
-#define HW_APBH_CH3_SEMA (0x80 + 3 * 0x70)
-#define HW_APBH_CH4_SEMA (0x80 + 4 * 0x70)
-#define HW_APBH_CH5_SEMA (0x80 + 5 * 0x70)
-#define HW_APBH_CH6_SEMA (0x80 + 6 * 0x70)
-#define HW_APBH_CH7_SEMA (0x80 + 7 * 0x70)
-#define HW_APBH_CH8_SEMA (0x80 + 8 * 0x70)
-#define HW_APBH_CH9_SEMA (0x80 + 9 * 0x70)
-#define HW_APBH_CH10_SEMA (0x80 + 10 * 0x70)
-#define HW_APBH_CH11_SEMA (0x80 + 11 * 0x70)
-#define HW_APBH_CH12_SEMA (0x80 + 12 * 0x70)
-#define HW_APBH_CH13_SEMA (0x80 + 13 * 0x70)
-#define HW_APBH_CH14_SEMA (0x80 + 14 * 0x70)
-#define HW_APBH_CH15_SEMA (0x80 + 15 * 0x70)
-
-#define HW_APBH_CHn_SEMA 0x80
-#define BM_APBH_CHn_SEMA_INCREMENT_SEMA 0x000000FF
-#define BP_APBH_CHn_SEMA_INCREMENT_SEMA 0
-#define BM_APBH_CHn_SEMA_PHORE 0x00FF0000
-#define BP_APBH_CHn_SEMA_PHORE 16
-
-#endif
+++ /dev/null
-/*
- * stmp37xx: APBX register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef _MACH_REGS_APBX
-#define _MACH_REGS_APBX
-
-#define REGS_APBX_BASE (STMP3XXX_REGS_BASE + 0x24000)
-
-#define HW_APBX_CTRL0 0x0
-#define BM_APBX_CTRL0_RESET_CHANNEL 0x00FF0000
-#define BP_APBX_CTRL0_RESET_CHANNEL 16
-#define BM_APBX_CTRL0_CLKGATE 0x40000000
-#define BM_APBX_CTRL0_SFTRST 0x80000000
-
-#define HW_APBX_CTRL1 0x10
-
-#define HW_APBX_DEVSEL 0x20
-
-#define HW_APBX_CH0_NXTCMDAR (0x50 + 0 * 0x70)
-#define HW_APBX_CH1_NXTCMDAR (0x50 + 1 * 0x70)
-#define HW_APBX_CH2_NXTCMDAR (0x50 + 2 * 0x70)
-#define HW_APBX_CH3_NXTCMDAR (0x50 + 3 * 0x70)
-#define HW_APBX_CH4_NXTCMDAR (0x50 + 4 * 0x70)
-#define HW_APBX_CH5_NXTCMDAR (0x50 + 5 * 0x70)
-#define HW_APBX_CH6_NXTCMDAR (0x50 + 6 * 0x70)
-#define HW_APBX_CH7_NXTCMDAR (0x50 + 7 * 0x70)
-#define HW_APBX_CH8_NXTCMDAR (0x50 + 8 * 0x70)
-#define HW_APBX_CH9_NXTCMDAR (0x50 + 9 * 0x70)
-#define HW_APBX_CH10_NXTCMDAR (0x50 + 10 * 0x70)
-#define HW_APBX_CH11_NXTCMDAR (0x50 + 11 * 0x70)
-#define HW_APBX_CH12_NXTCMDAR (0x50 + 12 * 0x70)
-#define HW_APBX_CH13_NXTCMDAR (0x50 + 13 * 0x70)
-#define HW_APBX_CH14_NXTCMDAR (0x50 + 14 * 0x70)
-#define HW_APBX_CH15_NXTCMDAR (0x50 + 15 * 0x70)
-
-#define HW_APBX_CHn_NXTCMDAR 0x50
-#define BM_APBX_CHn_CMD_MODE 0x00000003
-#define BP_APBX_CHn_CMD_MODE 0x00000001
-#define BV_APBX_CHn_CMD_MODE_NOOP 0
-#define BV_APBX_CHn_CMD_MODE_WRITE 1
-#define BV_APBX_CHn_CMD_MODE_READ 2
-#define BV_APBX_CHn_CMD_MODE_SENSE 3
-#define BM_APBX_CHn_CMD_COMMAND 0x00000003
-#define BP_APBX_CHn_CMD_COMMAND 0
-#define BM_APBX_CHn_CMD_CHAIN 0x00000004
-#define BM_APBX_CHn_CMD_IRQONCMPLT 0x00000008
-#define BM_APBX_CHn_CMD_SEMAPHORE 0x00000040
-#define BM_APBX_CHn_CMD_WAIT4ENDCMD 0x00000080
-#define BM_APBX_CHn_CMD_CMDWORDS 0x0000F000
-#define BP_APBX_CHn_CMD_CMDWORDS 12
-#define BM_APBX_CHn_CMD_XFER_COUNT 0xFFFF0000
-#define BP_APBX_CHn_CMD_XFER_COUNT 16
-
-#define HW_APBX_CH0_BAR (0x70 + 0 * 0x70)
-#define HW_APBX_CH1_BAR (0x70 + 1 * 0x70)
-#define HW_APBX_CH2_BAR (0x70 + 2 * 0x70)
-#define HW_APBX_CH3_BAR (0x70 + 3 * 0x70)
-#define HW_APBX_CH4_BAR (0x70 + 4 * 0x70)
-#define HW_APBX_CH5_BAR (0x70 + 5 * 0x70)
-#define HW_APBX_CH6_BAR (0x70 + 6 * 0x70)
-#define HW_APBX_CH7_BAR (0x70 + 7 * 0x70)
-#define HW_APBX_CH8_BAR (0x70 + 8 * 0x70)
-#define HW_APBX_CH9_BAR (0x70 + 9 * 0x70)
-#define HW_APBX_CH10_BAR (0x70 + 10 * 0x70)
-#define HW_APBX_CH11_BAR (0x70 + 11 * 0x70)
-#define HW_APBX_CH12_BAR (0x70 + 12 * 0x70)
-#define HW_APBX_CH13_BAR (0x70 + 13 * 0x70)
-#define HW_APBX_CH14_BAR (0x70 + 14 * 0x70)
-#define HW_APBX_CH15_BAR (0x70 + 15 * 0x70)
-
-#define HW_APBX_CHn_BAR 0x70
-
-#define HW_APBX_CH0_SEMA (0x80 + 0 * 0x70)
-#define HW_APBX_CH1_SEMA (0x80 + 1 * 0x70)
-#define HW_APBX_CH2_SEMA (0x80 + 2 * 0x70)
-#define HW_APBX_CH3_SEMA (0x80 + 3 * 0x70)
-#define HW_APBX_CH4_SEMA (0x80 + 4 * 0x70)
-#define HW_APBX_CH5_SEMA (0x80 + 5 * 0x70)
-#define HW_APBX_CH6_SEMA (0x80 + 6 * 0x70)
-#define HW_APBX_CH7_SEMA (0x80 + 7 * 0x70)
-#define HW_APBX_CH8_SEMA (0x80 + 8 * 0x70)
-#define HW_APBX_CH9_SEMA (0x80 + 9 * 0x70)
-#define HW_APBX_CH10_SEMA (0x80 + 10 * 0x70)
-#define HW_APBX_CH11_SEMA (0x80 + 11 * 0x70)
-#define HW_APBX_CH12_SEMA (0x80 + 12 * 0x70)
-#define HW_APBX_CH13_SEMA (0x80 + 13 * 0x70)
-#define HW_APBX_CH14_SEMA (0x80 + 14 * 0x70)
-#define HW_APBX_CH15_SEMA (0x80 + 15 * 0x70)
-
-#define HW_APBX_CHn_SEMA 0x80
-#define BM_APBX_CHn_SEMA_INCREMENT_SEMA 0x000000FF
-#define BP_APBX_CHn_SEMA_INCREMENT_SEMA 0
-#define BM_APBX_CHn_SEMA_PHORE 0x00FF0000
-#define BP_APBX_CHn_SEMA_PHORE 16
-
-#endif
+++ /dev/null
-/*
- * stmp37xx: AUDIOIN register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_AUDIOIN_BASE (STMP3XXX_REGS_BASE + 0x4C000)
-
-#define HW_AUDIOIN_CTRL 0x0
-#define BM_AUDIOIN_CTRL_RUN 0x00000001
-#define BP_AUDIOIN_CTRL_RUN 0
-#define BM_AUDIOIN_CTRL_FIFO_ERROR_IRQ_EN 0x00000002
-#define BM_AUDIOIN_CTRL_FIFO_OVERFLOW_IRQ 0x00000004
-#define BM_AUDIOIN_CTRL_FIFO_UNDERFLOW_IRQ 0x00000008
-#define BM_AUDIOIN_CTRL_WORD_LENGTH 0x00000020
-#define BM_AUDIOIN_CTRL_CLKGATE 0x40000000
-#define BM_AUDIOIN_CTRL_SFTRST 0x80000000
-
-#define HW_AUDIOIN_STAT 0x10
-
-#define HW_AUDIOIN_ADCSRR 0x20
-
-#define HW_AUDIOIN_ADCVOLUME 0x30
-#define BM_AUDIOIN_ADCVOLUME_VOLUME_RIGHT 0x000000FF
-#define BP_AUDIOIN_ADCVOLUME_VOLUME_RIGHT 0
-#define BM_AUDIOIN_ADCVOLUME_VOLUME_LEFT 0x00FF0000
-#define BP_AUDIOIN_ADCVOLUME_VOLUME_LEFT 16
-
-#define HW_AUDIOIN_ADCDEBUG 0x40
-
-#define HW_AUDIOIN_ADCVOL 0x50
-#define BM_AUDIOIN_ADCVOL_GAIN_RIGHT 0x0000000F
-#define BP_AUDIOIN_ADCVOL_GAIN_RIGHT 0
-#define BM_AUDIOIN_ADCVOL_SELECT_RIGHT 0x00000030
-#define BP_AUDIOIN_ADCVOL_SELECT_RIGHT 4
-#define BM_AUDIOIN_ADCVOL_GAIN_LEFT 0x00000F00
-#define BP_AUDIOIN_ADCVOL_GAIN_LEFT 8
-#define BM_AUDIOIN_ADCVOL_SELECT_LEFT 0x00003000
-#define BP_AUDIOIN_ADCVOL_SELECT_LEFT 12
-#define BM_AUDIOIN_ADCVOL_MUTE 0x01000000
-
-#define HW_AUDIOIN_MICLINE 0x60
-
-#define HW_AUDIOIN_ANACLKCTRL 0x70
-#define BM_AUDIOIN_ANACLKCTRL_CLKGATE 0x80000000
-
-#define HW_AUDIOIN_DATA 0x80
+++ /dev/null
-/*
- * stmp37xx: AUDIOOUT register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_AUDIOOUT_BASE (STMP3XXX_REGS_BASE + 0x48000)
-
-#define HW_AUDIOOUT_CTRL 0x0
-#define BM_AUDIOOUT_CTRL_RUN 0x00000001
-#define BP_AUDIOOUT_CTRL_RUN 0
-#define BM_AUDIOOUT_CTRL_FIFO_ERROR_IRQ_EN 0x00000002
-#define BM_AUDIOOUT_CTRL_FIFO_OVERFLOW_IRQ 0x00000004
-#define BM_AUDIOOUT_CTRL_FIFO_UNDERFLOW_IRQ 0x00000008
-#define BM_AUDIOOUT_CTRL_WORD_LENGTH 0x00000040
-#define BM_AUDIOOUT_CTRL_CLKGATE 0x40000000
-#define BM_AUDIOOUT_CTRL_SFTRST 0x80000000
-
-#define HW_AUDIOOUT_STAT 0x10
-
-#define HW_AUDIOOUT_DACSRR 0x20
-#define BM_AUDIOOUT_DACSRR_SRC_FRAC 0x00001FFF
-#define BP_AUDIOOUT_DACSRR_SRC_FRAC 0
-#define BM_AUDIOOUT_DACSRR_SRC_INT 0x001F0000
-#define BP_AUDIOOUT_DACSRR_SRC_INT 16
-#define BM_AUDIOOUT_DACSRR_SRC_HOLD 0x07000000
-#define BP_AUDIOOUT_DACSRR_SRC_HOLD 24
-#define BM_AUDIOOUT_DACSRR_BASEMULT 0x70000000
-#define BP_AUDIOOUT_DACSRR_BASEMULT 28
-
-#define HW_AUDIOOUT_DACVOLUME 0x30
-#define BM_AUDIOOUT_DACVOLUME_MUTE_RIGHT 0x00000100
-#define BM_AUDIOOUT_DACVOLUME_MUTE_LEFT 0x01000000
-#define BM_AUDIOOUT_DACVOLUME_EN_ZCD 0x02000000
-
-#define HW_AUDIOOUT_DACDEBUG 0x40
-
-#define HW_AUDIOOUT_HPVOL 0x50
-#define BM_AUDIOOUT_HPVOL_MUTE 0x01000000
-#define BM_AUDIOOUT_HPVOL_EN_MSTR_ZCD 0x02000000
-
-#define HW_AUDIOOUT_PWRDN 0x70
-#define BM_AUDIOOUT_PWRDN_HEADPHONE 0x00000001
-#define BP_AUDIOOUT_PWRDN_HEADPHONE 0
-#define BM_AUDIOOUT_PWRDN_CAPLESS 0x00000010
-#define BM_AUDIOOUT_PWRDN_ADC 0x00000100
-#define BM_AUDIOOUT_PWRDN_DAC 0x00001000
-#define BM_AUDIOOUT_PWRDN_RIGHT_ADC 0x00010000
-#define BM_AUDIOOUT_PWRDN_LINEOUT 0x01000000
-
-#define HW_AUDIOOUT_REFCTRL 0x80
-#define BM_AUDIOOUT_REFCTRL_VAG_VAL 0x000000F0
-#define BP_AUDIOOUT_REFCTRL_VAG_VAL 4
-#define BM_AUDIOOUT_REFCTRL_ADC_REFVAL 0x00000F00
-#define BP_AUDIOOUT_REFCTRL_ADC_REFVAL 8
-#define BM_AUDIOOUT_REFCTRL_ADJ_VAG 0x00001000
-#define BM_AUDIOOUT_REFCTRL_ADJ_ADC 0x00002000
-#define BM_AUDIOOUT_REFCTRL_BIAS_CTRL 0x00030000
-#define BP_AUDIOOUT_REFCTRL_BIAS_CTRL 16
-#define BM_AUDIOOUT_REFCTRL_LOW_PWR 0x00080000
-#define BM_AUDIOOUT_REFCTRL_VBG_ADJ 0x00700000
-#define BP_AUDIOOUT_REFCTRL_VBG_ADJ 20
-#define BM_AUDIOOUT_REFCTRL_XTAL_BGR_BIAS 0x01000000
-#define BM_AUDIOOUT_REFCTRL_RAISE_REF 0x02000000
-
-#define HW_AUDIOOUT_ANACTRL 0x90
-#define BM_AUDIOOUT_ANACTRL_HP_CLASSAB 0x00000010
-#define BM_AUDIOOUT_ANACTRL_HP_HOLD_GND 0x00000020
-
-#define HW_AUDIOOUT_TEST 0xA0
-#define BM_AUDIOOUT_TEST_HP_I1_ADJ 0x00C00000
-#define BP_AUDIOOUT_TEST_HP_I1_ADJ 22
-
-#define HW_AUDIOOUT_BISTCTRL 0xB0
-
-#define HW_AUDIOOUT_BISTSTAT0 0xC0
-
-#define HW_AUDIOOUT_BISTSTAT1 0xD0
-
-#define HW_AUDIOOUT_ANACLKCTRL 0xE0
-#define BM_AUDIOOUT_ANACLKCTRL_CLKGATE 0x80000000
-
-#define HW_AUDIOOUT_DATA 0xF0
-
-#define HW_AUDIOOUT_LINEOUTCTRL 0x100
-#define BM_AUDIOOUT_LINEOUTCTRL_VOL_RIGHT 0x0000001F
-#define BP_AUDIOOUT_LINEOUTCTRL_VOL_RIGHT 0
-#define BM_AUDIOOUT_LINEOUTCTRL_VOL_LEFT 0x00001F00
-#define BP_AUDIOOUT_LINEOUTCTRL_VOL_LEFT 8
-#define BM_AUDIOOUT_LINEOUTCTRL_CHARGE_CAP 0x00007000
-#define BP_AUDIOOUT_LINEOUTCTRL_CHARGE_CAP 12
-#define BM_AUDIOOUT_LINEOUTCTRL_VAG_CTRL 0x00F00000
-#define BP_AUDIOOUT_LINEOUTCTRL_VAG_CTRL 20
-#define BM_AUDIOOUT_LINEOUTCTRL_MUTE 0x01000000
-#define BM_AUDIOOUT_LINEOUTCTRL_EN_ZCD 0x02000000
-
-#define HW_AUDIOOUT_VERSION 0x200
+++ /dev/null
-/*
- * stmp37xx: CLKCTRL register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef _MACH_REGS_CLKCTRL
-#define _MACH_REGS_CLKCTRL
-
-#define REGS_CLKCTRL_BASE (STMP3XXX_REGS_BASE + 0x40000)
-
-#define HW_CLKCTRL_PLLCTRL0 0x0
-#define BM_CLKCTRL_PLLCTRL0_EN_USB_CLKS 0x00040000
-
-#define HW_CLKCTRL_CPU 0x20
-#define BM_CLKCTRL_CPU_DIV_CPU 0x0000003F
-#define BP_CLKCTRL_CPU_DIV_CPU 0
-
-#define HW_CLKCTRL_HBUS 0x30
-#define BM_CLKCTRL_HBUS_DIV 0x0000001F
-#define BP_CLKCTRL_HBUS_DIV 0
-
-#define HW_CLKCTRL_XBUS 0x40
-
-#define HW_CLKCTRL_XTAL 0x50
-
-#define HW_CLKCTRL_PIX 0x60
-#define BM_CLKCTRL_PIX_DIV 0x00007FFF
-#define BP_CLKCTRL_PIX_DIV 0
-#define BM_CLKCTRL_PIX_CLKGATE 0x80000000
-
-#define HW_CLKCTRL_SSP 0x70
-
-#define HW_CLKCTRL_GPMI 0x80
-
-#define HW_CLKCTRL_SPDIF 0x90
-
-#define HW_CLKCTRL_EMI 0xA0
-
-#define HW_CLKCTRL_IR 0xB0
-
-#define HW_CLKCTRL_SAIF 0xC0
-
-#define HW_CLKCTRL_FRAC 0xD0
-#define BM_CLKCTRL_FRAC_EMIFRAC 0x00003F00
-#define BP_CLKCTRL_FRAC_EMIFRAC 8
-#define BM_CLKCTRL_FRAC_PIXFRAC 0x003F0000
-#define BP_CLKCTRL_FRAC_PIXFRAC 16
-#define BM_CLKCTRL_FRAC_CLKGATEPIX 0x00800000
-
-#define HW_CLKCTRL_CLKSEQ 0xE0
-#define BM_CLKCTRL_CLKSEQ_BYPASS_PIX 0x00000002
-
-#define HW_CLKCTRL_RESET 0xF0
-#define BM_CLKCTRL_RESET_DIG 0x00000001
-#define BP_CLKCTRL_RESET_DIG 0
-
-#endif
+++ /dev/null
-/*
- * stmp37xx: DIGCTL register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_DIGCTL_BASE (STMP3XXX_REGS_BASE + 0x1C000)
-
-#define HW_DIGCTL_CTRL 0x0
-#define BM_DIGCTL_CTRL_USB_CLKGATE 0x00000004
+++ /dev/null
-/*
- * stmp37xx: ECC8 register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_ECC8_BASE (STMP3XXX_REGS_BASE + 0x8000)
-
-#define HW_ECC8_CTRL 0x0
-#define BM_ECC8_CTRL_COMPLETE_IRQ 0x00000001
-#define BP_ECC8_CTRL_COMPLETE_IRQ 0
-#define BM_ECC8_CTRL_COMPLETE_IRQ_EN 0x00000100
-#define BM_ECC8_CTRL_AHBM_SFTRST 0x20000000
-
-#define HW_ECC8_STATUS0 0x10
-#define BM_ECC8_STATUS0_UNCORRECTABLE 0x00000004
-#define BM_ECC8_STATUS0_CORRECTED 0x00000008
-#define BM_ECC8_STATUS0_STATUS_AUX 0x00000F00
-#define BP_ECC8_STATUS0_STATUS_AUX 8
-#define BM_ECC8_STATUS0_COMPLETED_CE 0x000F0000
-#define BP_ECC8_STATUS0_COMPLETED_CE 16
-
-#define HW_ECC8_STATUS1 0x20
+++ /dev/null
-/*
- * stmp37xx: GPMI register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_GPMI_BASE (STMP3XXX_REGS_BASE + 0xC000)
-#define REGS_GPMI_PHYS 0x8000C000
-#define REGS_GPMI_SIZE 0x2000
-
-#define HW_GPMI_CTRL0 0x0
-#define BM_GPMI_CTRL0_XFER_COUNT 0x0000FFFF
-#define BP_GPMI_CTRL0_XFER_COUNT 0
-#define BM_GPMI_CTRL0_CS 0x00300000
-#define BP_GPMI_CTRL0_CS 20
-#define BM_GPMI_CTRL0_LOCK_CS 0x00400000
-#define BM_GPMI_CTRL0_WORD_LENGTH 0x00800000
-#define BM_GPMI_CTRL0_COMMAND_MODE 0x03000000
-#define BP_GPMI_CTRL0_COMMAND_MODE 24
-#define BV_GPMI_CTRL0_COMMAND_MODE__WRITE 0x0
-#define BV_GPMI_CTRL0_COMMAND_MODE__READ 0x1
-#define BV_GPMI_CTRL0_COMMAND_MODE__READ_AND_COMPARE 0x2
-#define BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY 0x3
-#define BM_GPMI_CTRL0_RUN 0x20000000
-#define BM_GPMI_CTRL0_CLKGATE 0x40000000
-#define BM_GPMI_CTRL0_SFTRST 0x80000000
-#define BM_GPMI_ECCCTRL_ENABLE_ECC 0x00001000
-#define BM_GPMI_ECCCTRL_ECC_CMD 0x00006000
-#define BP_GPMI_ECCCTRL_ECC_CMD 13
-
-#define HW_GPMI_CTRL1 0x60
-#define BM_GPMI_CTRL1_GPMI_MODE 0x00000003
-#define BP_GPMI_CTRL1_GPMI_MODE 0
-#define BM_GPMI_CTRL1_ATA_IRQRDY_POLARITY 0x00000004
-#define BM_GPMI_CTRL1_DEV_RESET 0x00000008
-#define BM_GPMI_CTRL1_TIMEOUT_IRQ 0x00000200
-#define BM_GPMI_CTRL1_DEV_IRQ 0x00000400
-#define BM_GPMI_CTRL1_DSAMPLE_TIME 0x00007000
-#define BP_GPMI_CTRL1_DSAMPLE_TIME 12
-
-#define HW_GPMI_TIMING0 0x70
-#define BM_GPMI_TIMING0_DATA_SETUP 0x000000FF
-#define BP_GPMI_TIMING0_DATA_SETUP 0
-#define BM_GPMI_TIMING0_DATA_HOLD 0x0000FF00
-#define BP_GPMI_TIMING0_DATA_HOLD 8
-
-#define HW_GPMI_TIMING1 0x80
-#define BM_GPMI_TIMING1_DEVICE_BUSY_TIMEOUT 0xFFFF0000
-#define BP_GPMI_TIMING1_DEVICE_BUSY_TIMEOUT 16
+++ /dev/null
-/*
- * stmp37xx: I2C register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_I2C_BASE (STMP3XXX_REGS_BASE + 0x58000)
-#define REGS_I2C_PHYS 0x80058000
-#define REGS_I2C_SIZE 0x2000
-
-#define HW_I2C_CTRL0 0x0
-#define BM_I2C_CTRL0_XFER_COUNT 0x0000FFFF
-#define BP_I2C_CTRL0_XFER_COUNT 0
-#define BM_I2C_CTRL0_DIRECTION 0x00010000
-#define BM_I2C_CTRL0_MASTER_MODE 0x00020000
-#define BM_I2C_CTRL0_PRE_SEND_START 0x00080000
-#define BM_I2C_CTRL0_POST_SEND_STOP 0x00100000
-#define BM_I2C_CTRL0_RETAIN_CLOCK 0x00200000
-#define BM_I2C_CTRL0_SEND_NAK_ON_LAST 0x02000000
-#define BM_I2C_CTRL0_CLKGATE 0x40000000
-#define BM_I2C_CTRL0_SFTRST 0x80000000
-
-#define HW_I2C_TIMING0 0x10
-
-#define HW_I2C_TIMING1 0x20
-
-#define HW_I2C_TIMING2 0x30
-
-#define HW_I2C_CTRL1 0x40
-#define BM_I2C_CTRL1_SLAVE_IRQ 0x00000001
-#define BP_I2C_CTRL1_SLAVE_IRQ 0
-#define BM_I2C_CTRL1_SLAVE_STOP_IRQ 0x00000002
-#define BM_I2C_CTRL1_MASTER_LOSS_IRQ 0x00000004
-#define BM_I2C_CTRL1_EARLY_TERM_IRQ 0x00000008
-#define BM_I2C_CTRL1_OVERSIZE_XFER_TERM_IRQ 0x00000010
-#define BM_I2C_CTRL1_NO_SLAVE_ACK_IRQ 0x00000020
-#define BM_I2C_CTRL1_DATA_ENGINE_CMPLT_IRQ 0x00000040
-#define BM_I2C_CTRL1_BUS_FREE_IRQ 0x00000080
-#define BM_I2C_CTRL1_CLR_GOT_A_NAK 0x10000000
-
-#define HW_I2C_VERSION 0x90
+++ /dev/null
-/*
- * stmp37xx: ICOLL register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef _MACH_REGS_ICOLL
-#define _MACH_REGS_ICOLL
-
-#define REGS_ICOLL_BASE (STMP3XXX_REGS_BASE + 0x0)
-
-#define HW_ICOLL_VECTOR 0x0
-
-#define HW_ICOLL_LEVELACK 0x10
-
-#define HW_ICOLL_CTRL 0x20
-#define BM_ICOLL_CTRL_CLKGATE 0x40000000
-#define BM_ICOLL_CTRL_SFTRST 0x80000000
-
-#define HW_ICOLL_STAT 0x30
-
-#define HW_ICOLL_PRIORITY0 (0x60 + 0 * 0x10)
-#define HW_ICOLL_PRIORITY1 (0x60 + 1 * 0x10)
-#define HW_ICOLL_PRIORITY2 (0x60 + 2 * 0x10)
-#define HW_ICOLL_PRIORITY3 (0x60 + 3 * 0x10)
-
-#define HW_ICOLL_PRIORITYn 0x60
-
-#endif
+++ /dev/null
-/*
- * stmp37xx: LCDIF register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_LCDIF_BASE (STMP3XXX_REGS_BASE + 0x30000)
-#define REGS_LCDIF_PHYS 0x80030000
-#define REGS_LCDIF_SIZE 0x2000
-
-#define HW_LCDIF_CTRL 0x0
-#define BM_LCDIF_CTRL_COUNT 0x0000FFFF
-#define BP_LCDIF_CTRL_COUNT 0
-#define BM_LCDIF_CTRL_RUN 0x00010000
-#define BM_LCDIF_CTRL_WORD_LENGTH 0x00020000
-#define BM_LCDIF_CTRL_DATA_SELECT 0x00040000
-#define BM_LCDIF_CTRL_DOTCLK_MODE 0x00080000
-#define BM_LCDIF_CTRL_VSYNC_MODE 0x00100000
-#define BM_LCDIF_CTRL_DATA_SWIZZLE 0x00600000
-#define BP_LCDIF_CTRL_DATA_SWIZZLE 21
-#define BM_LCDIF_CTRL_BYPASS_COUNT 0x00800000
-#define BM_LCDIF_CTRL_SHIFT_NUM_BITS 0x06000000
-#define BP_LCDIF_CTRL_SHIFT_NUM_BITS 25
-#define BM_LCDIF_CTRL_DATA_SHIFT_DIR 0x08000000
-#define BM_LCDIF_CTRL_WAIT_FOR_VSYNC_EDGE 0x10000000
-#define BM_LCDIF_CTRL_CLKGATE 0x40000000
-#define BM_LCDIF_CTRL_SFTRST 0x80000000
-
-#define HW_LCDIF_CTRL1 0x10
-#define BM_LCDIF_CTRL1_RESET 0x00000001
-#define BP_LCDIF_CTRL1_RESET 0
-#define BM_LCDIF_CTRL1_MODE86 0x00000002
-#define BM_LCDIF_CTRL1_BUSY_ENABLE 0x00000004
-#define BM_LCDIF_CTRL1_VSYNC_EDGE_IRQ 0x00000100
-#define BM_LCDIF_CTRL1_CUR_FRAME_DONE_IRQ 0x00000200
-#define BM_LCDIF_CTRL1_UNDERFLOW_IRQ 0x00000400
-#define BM_LCDIF_CTRL1_OVERFLOW_IRQ 0x00000800
-#define BM_LCDIF_CTRL1_VSYNC_EDGE_IRQ_EN 0x00001000
-#define BM_LCDIF_CTRL1_BYTE_PACKING_FORMAT 0x000F0000
-#define BP_LCDIF_CTRL1_BYTE_PACKING_FORMAT 16
-
-#define HW_LCDIF_TIMING 0x20
-
-#define HW_LCDIF_VDCTRL0 0x30
-#define BM_LCDIF_VDCTRL0_VALID_DATA_CNT 0x000003FF
-#define BP_LCDIF_VDCTRL0_VALID_DATA_CNT 0
-#define BM_LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH_UNIT 0x00100000
-#define BM_LCDIF_VDCTRL0_VSYNC_PERIOD_UNIT 0x00200000
-#define BM_LCDIF_VDCTRL0_ENABLE_POL 0x01000000
-#define BM_LCDIF_VDCTRL0_DOTCLK_POL 0x02000000
-#define BM_LCDIF_VDCTRL0_HSYNC_POL 0x04000000
-#define BM_LCDIF_VDCTRL0_VSYNC_POL 0x08000000
-#define BM_LCDIF_VDCTRL0_ENABLE_PRESENT 0x10000000
-#define BM_LCDIF_VDCTRL0_VSYNC_OEB 0x20000000
-
-#define HW_LCDIF_VDCTRL1 0x40
-#define BM_LCDIF_VDCTRL1_VSYNC_PERIOD 0x000FFFFF
-#define BP_LCDIF_VDCTRL1_VSYNC_PERIOD 0
-#define BM_LCDIF_VDCTRL1_VSYNC_PULSE_WIDTH 0xFFF00000
-#define BP_LCDIF_VDCTRL1_VSYNC_PULSE_WIDTH 20
-
-#define HW_LCDIF_VDCTRL2 0x50
-#define BM_LCDIF_VDCTRL2_VALID_DATA_CNT 0x000007FF
-#define BP_LCDIF_VDCTRL2_VALID_DATA_CNT 0
-#define BM_LCDIF_VDCTRL2_HSYNC_PERIOD 0x007FF800
-#define BP_LCDIF_VDCTRL2_HSYNC_PERIOD 11
-#define BM_LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH 0xFF800000
-#define BP_LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH 23
-
-#define HW_LCDIF_VDCTRL3 0x60
-#define BM_LCDIF_VDCTRL3_VERTICAL_WAIT_CNT 0x000001FF
-#define BP_LCDIF_VDCTRL3_VERTICAL_WAIT_CNT 0
-#define BM_LCDIF_VDCTRL3_HORIZONTAL_WAIT_CNT 0x00FFF000
-#define BP_LCDIF_VDCTRL3_HORIZONTAL_WAIT_CNT 12
-#define BM_LCDIF_VDCTRL3_SYNC_SIGNALS_ON 0x01000000
+++ /dev/null
-/*
- * stmp37xx: LRADC register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_LRADC_BASE (STMP3XXX_REGS_BASE + 0x50000)
-
-#define HW_LRADC_CTRL0 0x0
-#define BM_LRADC_CTRL0_SCHEDULE 0x000000FF
-#define BP_LRADC_CTRL0_SCHEDULE 0
-#define BM_LRADC_CTRL0_XPLUS_ENABLE 0x00010000
-#define BM_LRADC_CTRL0_YPLUS_ENABLE 0x00020000
-#define BM_LRADC_CTRL0_XMINUS_ENABLE 0x00040000
-#define BM_LRADC_CTRL0_YMINUS_ENABLE 0x00080000
-#define BM_LRADC_CTRL0_TOUCH_DETECT_ENABLE 0x00100000
-#define BM_LRADC_CTRL0_ONCHIP_GROUNDREF 0x00200000
-#define BM_LRADC_CTRL0_CLKGATE 0x40000000
-#define BM_LRADC_CTRL0_SFTRST 0x80000000
-
-#define HW_LRADC_CTRL1 0x10
-#define BM_LRADC_CTRL1_LRADC0_IRQ 0x00000001
-#define BP_LRADC_CTRL1_LRADC0_IRQ 0
-#define BM_LRADC_CTRL1_LRADC5_IRQ 0x00000020
-#define BM_LRADC_CTRL1_LRADC6_IRQ 0x00000040
-#define BM_LRADC_CTRL1_TOUCH_DETECT_IRQ 0x00000100
-#define BM_LRADC_CTRL1_LRADC0_IRQ_EN 0x00010000
-#define BM_LRADC_CTRL1_LRADC5_IRQ_EN 0x00200000
-#define BM_LRADC_CTRL1_TOUCH_DETECT_IRQ_EN 0x01000000
-
-#define HW_LRADC_CTRL2 0x20
-#define BM_LRADC_CTRL2_BL_BRIGHTNESS 0x001F0000
-#define BP_LRADC_CTRL2_BL_BRIGHTNESS 16
-#define BM_LRADC_CTRL2_BL_MUX_SELECT 0x00200000
-#define BM_LRADC_CTRL2_BL_ENABLE 0x00400000
-#define BM_LRADC_CTRL2_DIVIDE_BY_TWO 0xFF000000
-#define BP_LRADC_CTRL2_DIVIDE_BY_TWO 24
-
-#define HW_LRADC_CTRL3 0x30
-#define BM_LRADC_CTRL3_CYCLE_TIME 0x00000300
-#define BP_LRADC_CTRL3_CYCLE_TIME 8
-
-#define HW_LRADC_STATUS 0x40
-#define BM_LRADC_STATUS_TOUCH_DETECT_RAW 0x00000001
-#define BP_LRADC_STATUS_TOUCH_DETECT_RAW 0
-
-#define HW_LRADC_CH0 (0x50 + 0 * 0x10)
-#define HW_LRADC_CH1 (0x50 + 1 * 0x10)
-#define HW_LRADC_CH2 (0x50 + 2 * 0x10)
-#define HW_LRADC_CH3 (0x50 + 3 * 0x10)
-#define HW_LRADC_CH4 (0x50 + 4 * 0x10)
-#define HW_LRADC_CH5 (0x50 + 5 * 0x10)
-#define HW_LRADC_CH6 (0x50 + 6 * 0x10)
-#define HW_LRADC_CH7 (0x50 + 7 * 0x10)
-
-#define HW_LRADC_CHn 0x50
-#define BM_LRADC_CHn_VALUE 0x0003FFFF
-#define BP_LRADC_CHn_VALUE 0
-#define BM_LRADC_CHn_NUM_SAMPLES 0x1F000000
-#define BP_LRADC_CHn_NUM_SAMPLES 24
-#define BM_LRADC_CHn_ACCUMULATE 0x20000000
-
-#define HW_LRADC_DELAY0 (0xD0 + 0 * 0x10)
-#define HW_LRADC_DELAY1 (0xD0 + 1 * 0x10)
-#define HW_LRADC_DELAY2 (0xD0 + 2 * 0x10)
-#define HW_LRADC_DELAY3 (0xD0 + 3 * 0x10)
-
-#define HW_LRADC_DELAYn 0xD0
-#define BM_LRADC_DELAYn_DELAY 0x000007FF
-#define BP_LRADC_DELAYn_DELAY 0
-#define BM_LRADC_DELAYn_LOOP_COUNT 0x0000F800
-#define BP_LRADC_DELAYn_LOOP_COUNT 11
-#define BM_LRADC_DELAYn_TRIGGER_DELAYS 0x000F0000
-#define BP_LRADC_DELAYn_TRIGGER_DELAYS 16
-#define BM_LRADC_DELAYn_KICK 0x00100000
-#define BM_LRADC_DELAYn_TRIGGER_LRADCS 0xFF000000
-#define BP_LRADC_DELAYn_TRIGGER_LRADCS 24
-
-#define HW_LRADC_CTRL4 0x140
-#define BM_LRADC_CTRL4_LRADC6SELECT 0x0F000000
-#define BP_LRADC_CTRL4_LRADC6SELECT 24
-#define BM_LRADC_CTRL4_LRADC7SELECT 0xF0000000
-#define BP_LRADC_CTRL4_LRADC7SELECT 28
+++ /dev/null
-/*
- * stmp37xx: PINCTRL register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef _MACH_REGS_PINCTRL
-#define _MACH_REGS_PINCTRL
-
-#define REGS_PINCTRL_BASE (STMP3XXX_REGS_BASE + 0x18000)
-
-#define HW_PINCTRL_MUXSEL0 0x100
-#define HW_PINCTRL_MUXSEL1 0x110
-#define HW_PINCTRL_MUXSEL2 0x120
-#define HW_PINCTRL_MUXSEL3 0x130
-#define HW_PINCTRL_MUXSEL4 0x140
-#define HW_PINCTRL_MUXSEL5 0x150
-#define HW_PINCTRL_MUXSEL6 0x160
-#define HW_PINCTRL_MUXSEL7 0x170
-
-#define HW_PINCTRL_DRIVE0 0x200
-#define HW_PINCTRL_DRIVE1 0x210
-#define HW_PINCTRL_DRIVE2 0x220
-#define HW_PINCTRL_DRIVE3 0x230
-#define HW_PINCTRL_DRIVE4 0x240
-#define HW_PINCTRL_DRIVE5 0x250
-#define HW_PINCTRL_DRIVE6 0x260
-#define HW_PINCTRL_DRIVE7 0x270
-#define HW_PINCTRL_DRIVE8 0x280
-#define HW_PINCTRL_DRIVE9 0x290
-#define HW_PINCTRL_DRIVE10 0x2A0
-#define HW_PINCTRL_DRIVE11 0x2B0
-#define HW_PINCTRL_DRIVE12 0x2C0
-#define HW_PINCTRL_DRIVE13 0x2D0
-#define HW_PINCTRL_DRIVE14 0x2E0
-
-#define HW_PINCTRL_PULL0 0x300
-#define HW_PINCTRL_PULL1 0x310
-#define HW_PINCTRL_PULL2 0x320
-#define HW_PINCTRL_PULL3 0x330
-
-#define HW_PINCTRL_DOUT0 0x400
-#define HW_PINCTRL_DOUT1 0x410
-#define HW_PINCTRL_DOUT2 0x420
-
-#define HW_PINCTRL_DIN0 0x500
-#define HW_PINCTRL_DIN1 0x510
-#define HW_PINCTRL_DIN2 0x520
-
-#define HW_PINCTRL_DOE0 0x600
-#define HW_PINCTRL_DOE1 0x610
-#define HW_PINCTRL_DOE2 0x620
-
-#define HW_PINCTRL_PIN2IRQ0 0x700
-#define HW_PINCTRL_PIN2IRQ1 0x710
-#define HW_PINCTRL_PIN2IRQ2 0x720
-
-#define HW_PINCTRL_IRQEN0 0x800
-#define HW_PINCTRL_IRQEN1 0x810
-#define HW_PINCTRL_IRQEN2 0x820
-
-#define HW_PINCTRL_IRQLEVEL0 0x900
-#define HW_PINCTRL_IRQLEVEL1 0x910
-#define HW_PINCTRL_IRQLEVEL2 0x920
-
-#define HW_PINCTRL_IRQPOL0 0xA00
-#define HW_PINCTRL_IRQPOL1 0xA10
-#define HW_PINCTRL_IRQPOL2 0xA20
-
-#define HW_PINCTRL_IRQSTAT0 0xB00
-#define HW_PINCTRL_IRQSTAT1 0xB10
-#define HW_PINCTRL_IRQSTAT2 0xB20
-
-#endif
+++ /dev/null
-/*
- * stmp37xx: POWER register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef _MACH_REGS_POWER
-#define _MACH_REGS_POWER
-
-#define REGS_POWER_BASE (STMP3XXX_REGS_BASE + 0x44000)
-
-#define HW_POWER_CTRL 0x0
-#define BM_POWER_CTRL_CLKGATE 0x40000000
-
-#define HW_POWER_5VCTRL 0x10
-
-#define HW_POWER_MINPWR 0x20
-
-#define HW_POWER_CHARGE 0x30
-
-#define HW_POWER_VDDDCTRL 0x40
-
-#define HW_POWER_VDDACTRL 0x50
-
-#define HW_POWER_VDDIOCTRL 0x60
-#define BM_POWER_VDDIOCTRL_TRG 0x0000001F
-#define BP_POWER_VDDIOCTRL_TRG 0
-
-#define HW_POWER_STS 0xB0
-#define BM_POWER_STS_VBUSVALID 0x00000002
-#define BM_POWER_STS_BVALID 0x00000004
-#define BM_POWER_STS_AVALID 0x00000008
-#define BM_POWER_STS_DC_OK 0x00000100
-
-#define HW_POWER_RESET 0xE0
-
-#define HW_POWER_DEBUG 0xF0
-#define BM_POWER_DEBUG_BVALIDPIOLOCK 0x00000002
-#define BM_POWER_DEBUG_AVALIDPIOLOCK 0x00000004
-#define BM_POWER_DEBUG_VBUSVALIDPIOLOCK 0x00000008
-
-#endif
+++ /dev/null
-/*
- * stmp37xx: PWM register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_PWM_BASE (STMP3XXX_REGS_BASE + 0x64000)
-
-#define HW_PWM_CTRL 0x0
-#define BM_PWM_CTRL_PWM2_ENABLE 0x00000004
-#define BM_PWM_CTRL_PWM2_ANA_CTRL_ENABLE 0x00000020
-
-#define HW_PWM_ACTIVE0 (0x10 + 0 * 0x20)
-#define HW_PWM_ACTIVE1 (0x10 + 1 * 0x20)
-#define HW_PWM_ACTIVE2 (0x10 + 2 * 0x20)
-#define HW_PWM_ACTIVE3 (0x10 + 3 * 0x20)
-
-#define HW_PWM_ACTIVEn 0x10
-#define BM_PWM_ACTIVEn_ACTIVE 0x0000FFFF
-#define BP_PWM_ACTIVEn_ACTIVE 0
-#define BM_PWM_ACTIVEn_INACTIVE 0xFFFF0000
-#define BP_PWM_ACTIVEn_INACTIVE 16
-
-#define HW_PWM_PERIOD0 (0x20 + 0 * 0x20)
-#define HW_PWM_PERIOD1 (0x20 + 1 * 0x20)
-#define HW_PWM_PERIOD2 (0x20 + 2 * 0x20)
-#define HW_PWM_PERIOD3 (0x20 + 3 * 0x20)
-
-#define HW_PWM_PERIODn 0x20
-#define BM_PWM_PERIODn_PERIOD 0x0000FFFF
-#define BP_PWM_PERIODn_PERIOD 0
-#define BM_PWM_PERIODn_ACTIVE_STATE 0x00030000
-#define BP_PWM_PERIODn_ACTIVE_STATE 16
-#define BM_PWM_PERIODn_INACTIVE_STATE 0x000C0000
-#define BP_PWM_PERIODn_INACTIVE_STATE 18
-#define BM_PWM_PERIODn_CDIV 0x00700000
-#define BP_PWM_PERIODn_CDIV 20
+++ /dev/null
-/*
- * stmp37xx: RTC register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_RTC_BASE (STMP3XXX_REGS_BASE + 0x5C000)
-#define REGS_RTC_PHYS 0x8005C000
-#define REGS_RTC_SIZE 0x2000
-
-#define HW_RTC_CTRL 0x0
-#define BM_RTC_CTRL_ALARM_IRQ_EN 0x00000001
-#define BP_RTC_CTRL_ALARM_IRQ_EN 0
-#define BM_RTC_CTRL_ONEMSEC_IRQ_EN 0x00000002
-#define BM_RTC_CTRL_ALARM_IRQ 0x00000004
-#define BM_RTC_CTRL_ONEMSEC_IRQ 0x00000008
-#define BM_RTC_CTRL_WATCHDOGEN 0x00000010
-
-#define HW_RTC_STAT 0x10
-#define BM_RTC_STAT_NEW_REGS 0x0000FF00
-#define BP_RTC_STAT_NEW_REGS 8
-#define BM_RTC_STAT_STALE_REGS 0x00FF0000
-#define BP_RTC_STAT_STALE_REGS 16
-#define BM_RTC_STAT_RTC_PRESENT 0x80000000
-
-#define HW_RTC_SECONDS 0x30
-
-#define HW_RTC_ALARM 0x40
-
-#define HW_RTC_WATCHDOG 0x50
-
-#define HW_RTC_PERSISTENT0 0x60
-#define BM_RTC_PERSISTENT0_ALARM_WAKE_EN 0x00000002
-#define BM_RTC_PERSISTENT0_ALARM_EN 0x00000004
-#define BM_RTC_PERSISTENT0_XTAL24MHZ_PWRUP 0x00000010
-#define BM_RTC_PERSISTENT0_XTAL32KHZ_PWRUP 0x00000020
-#define BM_RTC_PERSISTENT0_ALARM_WAKE 0x00000080
-#define BM_RTC_PERSISTENT0_SPARE_ANALOG 0xFFFC0000
-#define BP_RTC_PERSISTENT0_SPARE_ANALOG 18
-
-#define HW_RTC_PERSISTENT1 0x70
-
-#define HW_RTC_VERSION 0xD0
+++ /dev/null
-/*
- * stmp37xx: SSP register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_SSP_BASE (STMP3XXX_REGS_BASE + 0x10000)
-#define REGS_SSP1_PHYS 0x80010000
-#define REGS_SSP2_PHYS 0x80034000
-#define REGS_SSP_SIZE 0x2000
-
-#define HW_SSP_CTRL0 0x0
-#define BM_SSP_CTRL0_XFER_COUNT 0x0000FFFF
-#define BP_SSP_CTRL0_XFER_COUNT 0
-#define BM_SSP_CTRL0_ENABLE 0x00010000
-#define BM_SSP_CTRL0_GET_RESP 0x00020000
-#define BM_SSP_CTRL0_LONG_RESP 0x00080000
-#define BM_SSP_CTRL0_WAIT_FOR_CMD 0x00100000
-#define BM_SSP_CTRL0_WAIT_FOR_IRQ 0x00200000
-#define BM_SSP_CTRL0_BUS_WIDTH 0x00C00000
-#define BP_SSP_CTRL0_BUS_WIDTH 22
-#define BM_SSP_CTRL0_DATA_XFER 0x01000000
-#define BM_SSP_CTRL0_READ 0x02000000
-#define BM_SSP_CTRL0_IGNORE_CRC 0x04000000
-#define BM_SSP_CTRL0_LOCK_CS 0x08000000
-#define BM_SSP_CTRL0_RUN 0x20000000
-#define BM_SSP_CTRL0_CLKGATE 0x40000000
-#define BM_SSP_CTRL0_SFTRST 0x80000000
-
-#define HW_SSP_CMD0 0x10
-#define BM_SSP_CMD0_CMD 0x000000FF
-#define BP_SSP_CMD0_CMD 0
-#define BM_SSP_CMD0_BLOCK_COUNT 0x0000FF00
-#define BP_SSP_CMD0_BLOCK_COUNT 8
-#define BM_SSP_CMD0_BLOCK_SIZE 0x000F0000
-#define BP_SSP_CMD0_BLOCK_SIZE 16
-#define BM_SSP_CMD0_APPEND_8CYC 0x00100000
-#define BM_SSP_CMD1_CMD_ARG 0xFFFFFFFF
-#define BP_SSP_CMD1_CMD_ARG 0
-
-#define HW_SSP_TIMING 0x50
-#define BM_SSP_TIMING_CLOCK_RATE 0x000000FF
-#define BP_SSP_TIMING_CLOCK_RATE 0
-#define BM_SSP_TIMING_CLOCK_DIVIDE 0x0000FF00
-#define BP_SSP_TIMING_CLOCK_DIVIDE 8
-#define BM_SSP_TIMING_TIMEOUT 0xFFFF0000
-#define BP_SSP_TIMING_TIMEOUT 16
-
-#define HW_SSP_CTRL1 0x60
-#define BM_SSP_CTRL1_SSP_MODE 0x0000000F
-#define BP_SSP_CTRL1_SSP_MODE 0
-#define BM_SSP_CTRL1_WORD_LENGTH 0x000000F0
-#define BP_SSP_CTRL1_WORD_LENGTH 4
-#define BM_SSP_CTRL1_POLARITY 0x00000200
-#define BM_SSP_CTRL1_PHASE 0x00000400
-#define BM_SSP_CTRL1_DMA_ENABLE 0x00002000
-#define BM_SSP_CTRL1_FIFO_OVERRUN_IRQ 0x00008000
-#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ_EN 0x00010000
-#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ 0x00020000
-#define BM_SSP_CTRL1_FIFO_UNDERRUN_IRQ 0x00200000
-#define BM_SSP_CTRL1_DATA_CRC_IRQ_EN 0x00400000
-#define BM_SSP_CTRL1_DATA_CRC_IRQ 0x00800000
-#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ_EN 0x01000000
-#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ 0x02000000
-#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ_EN 0x04000000
-#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ 0x08000000
-#define BM_SSP_CTRL1_RESP_ERR_IRQ_EN 0x10000000
-#define BM_SSP_CTRL1_RESP_ERR_IRQ 0x20000000
-#define BM_SSP_CTRL1_SDIO_IRQ 0x80000000
-
-#define HW_SSP_DATA 0x70
-
-#define HW_SSP_SDRESP0 0x80
-
-#define HW_SSP_SDRESP1 0x90
-
-#define HW_SSP_SDRESP2 0xA0
-
-#define HW_SSP_SDRESP3 0xB0
-
-#define HW_SSP_STATUS 0xC0
-#define BM_SSP_STATUS_FIFO_EMPTY 0x00000020
-#define BM_SSP_STATUS_TIMEOUT 0x00001000
-#define BM_SSP_STATUS_RESP_TIMEOUT 0x00004000
-#define BM_SSP_STATUS_RESP_ERR 0x00008000
-#define BM_SSP_STATUS_RESP_CRC_ERR 0x00010000
-#define BM_SSP_STATUS_CARD_DETECT 0x10000000
+++ /dev/null
-/*
- * stmp37xx: TIMROT register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef _MACH_REGS_TIMROT
-#define _MACH_REGS_TIMROT
-
-#define REGS_TIMROT_BASE (STMP3XXX_REGS_BASE + 0x68000)
-
-#define HW_TIMROT_ROTCTRL 0x0
-#define BM_TIMROT_ROTCTRL_CLKGATE 0x40000000
-#define BM_TIMROT_ROTCTRL_SFTRST 0x80000000
-
-#define HW_TIMROT_TIMCTRL0 (0x20 + 0 * 0x20)
-#define HW_TIMROT_TIMCTRL1 (0x20 + 1 * 0x20)
-#define HW_TIMROT_TIMCTRL2 (0x20 + 2 * 0x20)
-
-#define HW_TIMROT_TIMCTRLn 0x20
-#define BM_TIMROT_TIMCTRLn_SELECT 0x0000000F
-#define BP_TIMROT_TIMCTRLn_SELECT 0
-#define BM_TIMROT_TIMCTRLn_PRESCALE 0x00000030
-#define BP_TIMROT_TIMCTRLn_PRESCALE 4
-#define BM_TIMROT_TIMCTRLn_RELOAD 0x00000040
-#define BM_TIMROT_TIMCTRLn_UPDATE 0x00000080
-#define BM_TIMROT_TIMCTRLn_IRQ_EN 0x00004000
-#define BM_TIMROT_TIMCTRLn_IRQ 0x00008000
-
-#define HW_TIMROT_TIMCOUNT0 (0x30 + 0 * 0x20)
-#define HW_TIMROT_TIMCOUNT1 (0x30 + 1 * 0x20)
-#define HW_TIMROT_TIMCOUNT2 (0x30 + 2 * 0x20)
-
-#define HW_TIMROT_TIMCOUNTn 0x30
-#endif
+++ /dev/null
-/*
- * stmp37xx: UARTAPP register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_UARTAPP_BASE (STMP3XXX_REGS_BASE + 0x6C000)
-#define REGS_UARTAPP1_PHYS 0x8006C000
-#define REGS_UARTAPP_SIZE 0x2000
-
-#define HW_UARTAPP_CTRL0 0x0
-#define BM_UARTAPP_CTRL0_XFER_COUNT 0x0000FFFF
-#define BP_UARTAPP_CTRL0_XFER_COUNT 0
-#define BM_UARTAPP_CTRL0_RXTIMEOUT 0x07FF0000
-#define BP_UARTAPP_CTRL0_RXTIMEOUT 16
-#define BM_UARTAPP_CTRL0_RXTO_ENABLE 0x08000000
-#define BM_UARTAPP_CTRL0_RUN 0x20000000
-#define BM_UARTAPP_CTRL0_SFTRST 0x80000000
-#define BM_UARTAPP_CTRL1_XFER_COUNT 0x0000FFFF
-#define BP_UARTAPP_CTRL1_XFER_COUNT 0
-#define BM_UARTAPP_CTRL1_RUN 0x10000000
-
-#define HW_UARTAPP_CTRL2 0x20
-#define BM_UARTAPP_CTRL2_UARTEN 0x00000001
-#define BP_UARTAPP_CTRL2_UARTEN 0
-#define BM_UARTAPP_CTRL2_TXE 0x00000100
-#define BM_UARTAPP_CTRL2_RXE 0x00000200
-#define BM_UARTAPP_CTRL2_RTS 0x00000800
-#define BM_UARTAPP_CTRL2_RTSEN 0x00004000
-#define BM_UARTAPP_CTRL2_CTSEN 0x00008000
-#define BM_UARTAPP_CTRL2_RXDMAE 0x01000000
-#define BM_UARTAPP_CTRL2_TXDMAE 0x02000000
-#define BM_UARTAPP_CTRL2_DMAONERR 0x04000000
-
-#define HW_UARTAPP_LINECTRL 0x30
-#define BM_UARTAPP_LINECTRL_BRK 0x00000001
-#define BP_UARTAPP_LINECTRL_BRK 0
-#define BM_UARTAPP_LINECTRL_PEN 0x00000002
-#define BM_UARTAPP_LINECTRL_EPS 0x00000004
-#define BM_UARTAPP_LINECTRL_STP2 0x00000008
-#define BM_UARTAPP_LINECTRL_FEN 0x00000010
-#define BM_UARTAPP_LINECTRL_WLEN 0x00000060
-#define BP_UARTAPP_LINECTRL_WLEN 5
-#define BM_UARTAPP_LINECTRL_SPS 0x00000080
-#define BM_UARTAPP_LINECTRL_BAUD_DIVFRAC 0x00003F00
-#define BP_UARTAPP_LINECTRL_BAUD_DIVFRAC 8
-#define BM_UARTAPP_LINECTRL_BAUD_DIVINT 0xFFFF0000
-#define BP_UARTAPP_LINECTRL_BAUD_DIVINT 16
-
-#define HW_UARTAPP_INTR 0x50
-#define BM_UARTAPP_INTR_CTSMIS 0x00000002
-#define BM_UARTAPP_INTR_RTIS 0x00000040
-#define BM_UARTAPP_INTR_CTSMIEN 0x00020000
-#define BM_UARTAPP_INTR_RXIEN 0x00100000
-#define BM_UARTAPP_INTR_RTIEN 0x00400000
-
-#define HW_UARTAPP_DATA 0x60
-
-#define HW_UARTAPP_STAT 0x70
-#define BM_UARTAPP_STAT_RXCOUNT 0x0000FFFF
-#define BP_UARTAPP_STAT_RXCOUNT 0
-#define BM_UARTAPP_STAT_FERR 0x00010000
-#define BM_UARTAPP_STAT_PERR 0x00020000
-#define BM_UARTAPP_STAT_BERR 0x00040000
-#define BM_UARTAPP_STAT_OERR 0x00080000
-#define BM_UARTAPP_STAT_RXFE 0x01000000
-#define BM_UARTAPP_STAT_TXFF 0x02000000
-#define BM_UARTAPP_STAT_TXFE 0x08000000
-#define BM_UARTAPP_STAT_CTS 0x10000000
-
-#define HW_UARTAPP_VERSION 0x90
+++ /dev/null
-/*
- * stmp378x: UARTDBG register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_UARTDBG_BASE (STMP3XXX_REGS_BASE + 0x70000)
-#define REGS_UARTDBG_PHYS 0x80070000
-#define REGS_UARTDBG_SIZE 0x2000
-
-#define HW_UARTDBGDR 0x00000000
-#define BP_UARTDBGDR_UNAVAILABLE 16
-#define BM_UARTDBGDR_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGDR_UNAVAILABLE(v) \
- (((v) << 16) & BM_UARTDBGDR_UNAVAILABLE)
-#define BP_UARTDBGDR_RESERVED 12
-#define BM_UARTDBGDR_RESERVED 0x0000F000
-#define BF_UARTDBGDR_RESERVED(v) \
- (((v) << 12) & BM_UARTDBGDR_RESERVED)
-#define BM_UARTDBGDR_OE 0x00000800
-#define BM_UARTDBGDR_BE 0x00000400
-#define BM_UARTDBGDR_PE 0x00000200
-#define BM_UARTDBGDR_FE 0x00000100
-#define BP_UARTDBGDR_DATA 0
-#define BM_UARTDBGDR_DATA 0x000000FF
-#define BF_UARTDBGDR_DATA(v) \
- (((v) << 0) & BM_UARTDBGDR_DATA)
-#define HW_UARTDBGRSR_ECR 0x00000004
-#define BP_UARTDBGRSR_ECR_UNAVAILABLE 8
-#define BM_UARTDBGRSR_ECR_UNAVAILABLE 0xFFFFFF00
-#define BF_UARTDBGRSR_ECR_UNAVAILABLE(v) \
- (((v) << 8) & BM_UARTDBGRSR_ECR_UNAVAILABLE)
-#define BP_UARTDBGRSR_ECR_EC 4
-#define BM_UARTDBGRSR_ECR_EC 0x000000F0
-#define BF_UARTDBGRSR_ECR_EC(v) \
- (((v) << 4) & BM_UARTDBGRSR_ECR_EC)
-#define BM_UARTDBGRSR_ECR_OE 0x00000008
-#define BM_UARTDBGRSR_ECR_BE 0x00000004
-#define BM_UARTDBGRSR_ECR_PE 0x00000002
-#define BM_UARTDBGRSR_ECR_FE 0x00000001
-#define HW_UARTDBGFR 0x00000018
-#define BP_UARTDBGFR_UNAVAILABLE 16
-#define BM_UARTDBGFR_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGFR_UNAVAILABLE(v) \
- (((v) << 16) & BM_UARTDBGFR_UNAVAILABLE)
-#define BP_UARTDBGFR_RESERVED 9
-#define BM_UARTDBGFR_RESERVED 0x0000FE00
-#define BF_UARTDBGFR_RESERVED(v) \
- (((v) << 9) & BM_UARTDBGFR_RESERVED)
-#define BM_UARTDBGFR_RI 0x00000100
-#define BM_UARTDBGFR_TXFE 0x00000080
-#define BM_UARTDBGFR_RXFF 0x00000040
-#define BM_UARTDBGFR_TXFF 0x00000020
-#define BM_UARTDBGFR_RXFE 0x00000010
-#define BM_UARTDBGFR_BUSY 0x00000008
-#define BM_UARTDBGFR_DCD 0x00000004
-#define BM_UARTDBGFR_DSR 0x00000002
-#define BM_UARTDBGFR_CTS 0x00000001
-#define HW_UARTDBGILPR 0x00000020
-#define BP_UARTDBGILPR_UNAVAILABLE 8
-#define BM_UARTDBGILPR_UNAVAILABLE 0xFFFFFF00
-#define BF_UARTDBGILPR_UNAVAILABLE(v) \
- (((v) << 8) & BM_UARTDBGILPR_UNAVAILABLE)
-#define BP_UARTDBGILPR_ILPDVSR 0
-#define BM_UARTDBGILPR_ILPDVSR 0x000000FF
-#define BF_UARTDBGILPR_ILPDVSR(v) \
- (((v) << 0) & BM_UARTDBGILPR_ILPDVSR)
-#define HW_UARTDBGIBRD 0x00000024
-#define BP_UARTDBGIBRD_UNAVAILABLE 16
-#define BM_UARTDBGIBRD_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGIBRD_UNAVAILABLE(v) \
- (((v) << 16) & BM_UARTDBGIBRD_UNAVAILABLE)
-#define BP_UARTDBGIBRD_BAUD_DIVINT 0
-#define BM_UARTDBGIBRD_BAUD_DIVINT 0x0000FFFF
-#define BF_UARTDBGIBRD_BAUD_DIVINT(v) \
- (((v) << 0) & BM_UARTDBGIBRD_BAUD_DIVINT)
-#define HW_UARTDBGFBRD 0x00000028
-#define BP_UARTDBGFBRD_UNAVAILABLE 8
-#define BM_UARTDBGFBRD_UNAVAILABLE 0xFFFFFF00
-#define BF_UARTDBGFBRD_UNAVAILABLE(v) \
- (((v) << 8) & BM_UARTDBGFBRD_UNAVAILABLE)
-#define BP_UARTDBGFBRD_RESERVED 6
-#define BM_UARTDBGFBRD_RESERVED 0x000000C0
-#define BF_UARTDBGFBRD_RESERVED(v) \
- (((v) << 6) & BM_UARTDBGFBRD_RESERVED)
-#define BP_UARTDBGFBRD_BAUD_DIVFRAC 0
-#define BM_UARTDBGFBRD_BAUD_DIVFRAC 0x0000003F
-#define BF_UARTDBGFBRD_BAUD_DIVFRAC(v) \
- (((v) << 0) & BM_UARTDBGFBRD_BAUD_DIVFRAC)
-#define HW_UARTDBGLCR_H 0x0000002c
-#define BP_UARTDBGLCR_H_UNAVAILABLE 16
-#define BM_UARTDBGLCR_H_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGLCR_H_UNAVAILABLE(v) \
- (((v) << 16) & BM_UARTDBGLCR_H_UNAVAILABLE)
-#define BP_UARTDBGLCR_H_RESERVED 8
-#define BM_UARTDBGLCR_H_RESERVED 0x0000FF00
-#define BF_UARTDBGLCR_H_RESERVED(v) \
- (((v) << 8) & BM_UARTDBGLCR_H_RESERVED)
-#define BM_UARTDBGLCR_H_SPS 0x00000080
-#define BP_UARTDBGLCR_H_WLEN 5
-#define BM_UARTDBGLCR_H_WLEN 0x00000060
-#define BF_UARTDBGLCR_H_WLEN(v) \
- (((v) << 5) & BM_UARTDBGLCR_H_WLEN)
-#define BM_UARTDBGLCR_H_FEN 0x00000010
-#define BM_UARTDBGLCR_H_STP2 0x00000008
-#define BM_UARTDBGLCR_H_EPS 0x00000004
-#define BM_UARTDBGLCR_H_PEN 0x00000002
-#define BM_UARTDBGLCR_H_BRK 0x00000001
-#define HW_UARTDBGCR 0x00000030
-#define BP_UARTDBGCR_UNAVAILABLE 16
-#define BM_UARTDBGCR_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGCR_UNAVAILABLE(v) \
- (((v) << 16) & BM_UARTDBGCR_UNAVAILABLE)
-#define BM_UARTDBGCR_CTSEN 0x00008000
-#define BM_UARTDBGCR_RTSEN 0x00004000
-#define BM_UARTDBGCR_OUT2 0x00002000
-#define BM_UARTDBGCR_OUT1 0x00001000
-#define BM_UARTDBGCR_RTS 0x00000800
-#define BM_UARTDBGCR_DTR 0x00000400
-#define BM_UARTDBGCR_RXE 0x00000200
-#define BM_UARTDBGCR_TXE 0x00000100
-#define BM_UARTDBGCR_LBE 0x00000080
-#define BP_UARTDBGCR_RESERVED 3
-#define BM_UARTDBGCR_RESERVED 0x00000078
-#define BF_UARTDBGCR_RESERVED(v) \
- (((v) << 3) & BM_UARTDBGCR_RESERVED)
-#define BM_UARTDBGCR_SIRLP 0x00000004
-#define BM_UARTDBGCR_SIREN 0x00000002
-#define BM_UARTDBGCR_UARTEN 0x00000001
-#define HW_UARTDBGIFLS 0x00000034
-#define BP_UARTDBGIFLS_UNAVAILABLE 16
-#define BM_UARTDBGIFLS_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGIFLS_UNAVAILABLE(v) \
- (((v) << 16) & BM_UARTDBGIFLS_UNAVAILABLE)
-#define BP_UARTDBGIFLS_RESERVED 6
-#define BM_UARTDBGIFLS_RESERVED 0x0000FFC0
-#define BF_UARTDBGIFLS_RESERVED(v) \
- (((v) << 6) & BM_UARTDBGIFLS_RESERVED)
-#define BP_UARTDBGIFLS_RXIFLSEL 3
-#define BM_UARTDBGIFLS_RXIFLSEL 0x00000038
-#define BF_UARTDBGIFLS_RXIFLSEL(v) \
- (((v) << 3) & BM_UARTDBGIFLS_RXIFLSEL)
-#define BV_UARTDBGIFLS_RXIFLSEL__NOT_EMPTY 0x0
-#define BV_UARTDBGIFLS_RXIFLSEL__ONE_QUARTER 0x1
-#define BV_UARTDBGIFLS_RXIFLSEL__ONE_HALF 0x2
-#define BV_UARTDBGIFLS_RXIFLSEL__THREE_QUARTERS 0x3
-#define BV_UARTDBGIFLS_RXIFLSEL__SEVEN_EIGHTHS 0x4
-#define BV_UARTDBGIFLS_RXIFLSEL__INVALID5 0x5
-#define BV_UARTDBGIFLS_RXIFLSEL__INVALID6 0x6
-#define BV_UARTDBGIFLS_RXIFLSEL__INVALID7 0x7
-#define BP_UARTDBGIFLS_TXIFLSEL 0
-#define BM_UARTDBGIFLS_TXIFLSEL 0x00000007
-#define BF_UARTDBGIFLS_TXIFLSEL(v) \
- (((v) << 0) & BM_UARTDBGIFLS_TXIFLSEL)
-#define BV_UARTDBGIFLS_TXIFLSEL__EMPTY 0x0
-#define BV_UARTDBGIFLS_TXIFLSEL__ONE_QUARTER 0x1
-#define BV_UARTDBGIFLS_TXIFLSEL__ONE_HALF 0x2
-#define BV_UARTDBGIFLS_TXIFLSEL__THREE_QUARTERS 0x3
-#define BV_UARTDBGIFLS_TXIFLSEL__SEVEN_EIGHTHS 0x4
-#define BV_UARTDBGIFLS_TXIFLSEL__INVALID5 0x5
-#define BV_UARTDBGIFLS_TXIFLSEL__INVALID6 0x6
-#define BV_UARTDBGIFLS_TXIFLSEL__INVALID7 0x7
-#define HW_UARTDBGIMSC 0x00000038
-#define BP_UARTDBGIMSC_UNAVAILABLE 16
-#define BM_UARTDBGIMSC_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGIMSC_UNAVAILABLE(v) \
- (((v) << 16) & BM_UARTDBGIMSC_UNAVAILABLE)
-#define BP_UARTDBGIMSC_RESERVED 11
-#define BM_UARTDBGIMSC_RESERVED 0x0000F800
-#define BF_UARTDBGIMSC_RESERVED(v) \
- (((v) << 11) & BM_UARTDBGIMSC_RESERVED)
-#define BM_UARTDBGIMSC_OEIM 0x00000400
-#define BM_UARTDBGIMSC_BEIM 0x00000200
-#define BM_UARTDBGIMSC_PEIM 0x00000100
-#define BM_UARTDBGIMSC_FEIM 0x00000080
-#define BM_UARTDBGIMSC_RTIM 0x00000040
-#define BM_UARTDBGIMSC_TXIM 0x00000020
-#define BM_UARTDBGIMSC_RXIM 0x00000010
-#define BM_UARTDBGIMSC_DSRMIM 0x00000008
-#define BM_UARTDBGIMSC_DCDMIM 0x00000004
-#define BM_UARTDBGIMSC_CTSMIM 0x00000002
-#define BM_UARTDBGIMSC_RIMIM 0x00000001
-#define HW_UARTDBGRIS 0x0000003c
-#define BP_UARTDBGRIS_UNAVAILABLE 16
-#define BM_UARTDBGRIS_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGRIS_UNAVAILABLE(v) \
- (((v) << 16) & BM_UARTDBGRIS_UNAVAILABLE)
-#define BP_UARTDBGRIS_RESERVED 11
-#define BM_UARTDBGRIS_RESERVED 0x0000F800
-#define BF_UARTDBGRIS_RESERVED(v) \
- (((v) << 11) & BM_UARTDBGRIS_RESERVED)
-#define BM_UARTDBGRIS_OERIS 0x00000400
-#define BM_UARTDBGRIS_BERIS 0x00000200
-#define BM_UARTDBGRIS_PERIS 0x00000100
-#define BM_UARTDBGRIS_FERIS 0x00000080
-#define BM_UARTDBGRIS_RTRIS 0x00000040
-#define BM_UARTDBGRIS_TXRIS 0x00000020
-#define BM_UARTDBGRIS_RXRIS 0x00000010
-#define BM_UARTDBGRIS_DSRRMIS 0x00000008
-#define BM_UARTDBGRIS_DCDRMIS 0x00000004
-#define BM_UARTDBGRIS_CTSRMIS 0x00000002
-#define BM_UARTDBGRIS_RIRMIS 0x00000001
-#define HW_UARTDBGMIS 0x00000040
-#define BP_UARTDBGMIS_UNAVAILABLE 16
-#define BM_UARTDBGMIS_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGMIS_UNAVAILABLE(v) \
- (((v) << 16) & BM_UARTDBGMIS_UNAVAILABLE)
-#define BP_UARTDBGMIS_RESERVED 11
-#define BM_UARTDBGMIS_RESERVED 0x0000F800
-#define BF_UARTDBGMIS_RESERVED(v) \
- (((v) << 11) & BM_UARTDBGMIS_RESERVED)
-#define BM_UARTDBGMIS_OEMIS 0x00000400
-#define BM_UARTDBGMIS_BEMIS 0x00000200
-#define BM_UARTDBGMIS_PEMIS 0x00000100
-#define BM_UARTDBGMIS_FEMIS 0x00000080
-#define BM_UARTDBGMIS_RTMIS 0x00000040
-#define BM_UARTDBGMIS_TXMIS 0x00000020
-#define BM_UARTDBGMIS_RXMIS 0x00000010
-#define BM_UARTDBGMIS_DSRMMIS 0x00000008
-#define BM_UARTDBGMIS_DCDMMIS 0x00000004
-#define BM_UARTDBGMIS_CTSMMIS 0x00000002
-#define BM_UARTDBGMIS_RIMMIS 0x00000001
-#define HW_UARTDBGICR 0x00000044
-#define BP_UARTDBGICR_UNAVAILABLE 16
-#define BM_UARTDBGICR_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGICR_UNAVAILABLE(v) \
- (((v) << 16) & BM_UARTDBGICR_UNAVAILABLE)
-#define BP_UARTDBGICR_RESERVED 11
-#define BM_UARTDBGICR_RESERVED 0x0000F800
-#define BF_UARTDBGICR_RESERVED(v) \
- (((v) << 11) & BM_UARTDBGICR_RESERVED)
-#define BM_UARTDBGICR_OEIC 0x00000400
-#define BM_UARTDBGICR_BEIC 0x00000200
-#define BM_UARTDBGICR_PEIC 0x00000100
-#define BM_UARTDBGICR_FEIC 0x00000080
-#define BM_UARTDBGICR_RTIC 0x00000040
-#define BM_UARTDBGICR_TXIC 0x00000020
-#define BM_UARTDBGICR_RXIC 0x00000010
-#define BM_UARTDBGICR_DSRMIC 0x00000008
-#define BM_UARTDBGICR_DCDMIC 0x00000004
-#define BM_UARTDBGICR_CTSMIC 0x00000002
-#define BM_UARTDBGICR_RIMIC 0x00000001
-#define HW_UARTDBGDMACR 0x00000048
-#define BP_UARTDBGDMACR_UNAVAILABLE 16
-#define BM_UARTDBGDMACR_UNAVAILABLE 0xFFFF0000
-#define BF_UARTDBGDMACR_UNAVAILABLE(v) \
- (((v) << 16) & BM_UARTDBGDMACR_UNAVAILABLE)
-#define BP_UARTDBGDMACR_RESERVED 3
-#define BM_UARTDBGDMACR_RESERVED 0x0000FFF8
-#define BF_UARTDBGDMACR_RESERVED(v) \
- (((v) << 3) & BM_UARTDBGDMACR_RESERVED)
-#define BM_UARTDBGDMACR_DMAONERR 0x00000004
-#define BM_UARTDBGDMACR_TXDMAE 0x00000002
-#define BM_UARTDBGDMACR_RXDMAE 0x00000001
+++ /dev/null
-/*
- * stmp37xx: USBCTL register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_USBCTL_BASE (STMP3XXX_REGS_BASE + 0x80000)
-#define REGS_USBCTL_PHYS 0x80000
+++ /dev/null
-/*
- * stmp37xx: USBCTRL register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_USBCTRL_BASE (STMP3XXX_REGS_BASE + 0x80000)
-#define REGS_USBCTRL_PHYS 0x80080000
+++ /dev/null
-/*
- * stmp37xx: USBPHY register definitions
- *
- * Copyright (c) 2008 Freescale Semiconductor
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define REGS_USBPHY_BASE (STMP3XXX_REGS_BASE + 0x7C000)
-
-#define HW_USBPHY_PWD 0x0
-
-#define HW_USBPHY_CTRL 0x30
-#define BM_USBPHY_CTRL_ENHSPRECHARGEXMIT 0x00000001
-#define BP_USBPHY_CTRL_ENHSPRECHARGEXMIT 0
-#define BM_USBPHY_CTRL_ENHOSTDISCONDETECT 0x00000002
-#define BM_USBPHY_CTRL_ENDEVPLUGINDETECT 0x00000010
-#define BM_USBPHY_CTRL_ENOTGIDDETECT 0x00000080
-#define BM_USBPHY_CTRL_ENIRQDEVPLUGIN 0x00000800
-#define BM_USBPHY_CTRL_CLKGATE 0x40000000
-#define BM_USBPHY_CTRL_SFTRST 0x80000000
-
-#define HW_USBPHY_STATUS 0x40
-#define BM_USBPHY_STATUS_DEVPLUGIN_STATUS 0x00000040
-#define BM_USBPHY_STATUS_OTGID_STATUS 0x00000100
+++ /dev/null
-/*
- * Freescale STMP37XX platform support
- *
- * Embedded Alley Solutions, Inc <source@embeddedalley.com>
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-
-#include <mach/stmp3xxx.h>
-#include <mach/dma.h>
-
-#include <mach/platform.h>
-#include <mach/regs-icoll.h>
-#include <mach/regs-apbh.h>
-#include <mach/regs-apbx.h>
-#include "stmp37xx.h"
-
-/*
- * IRQ handling
- */
-static void stmp37xx_ack_irq(struct irq_data *d)
-{
- /* Disable IRQ */
- stmp3xxx_clearl(0x04 << ((d->irq % 4) * 8),
- REGS_ICOLL_BASE + HW_ICOLL_PRIORITYn + d->irq / 4 * 0x10);
-
- /* ACK current interrupt */
- __raw_writel(1, REGS_ICOLL_BASE + HW_ICOLL_LEVELACK);
-
- /* Barrier */
- (void)__raw_readl(REGS_ICOLL_BASE + HW_ICOLL_STAT);
-}
-
-static void stmp37xx_mask_irq(struct irq_data *d)
-{
- /* IRQ disable */
- stmp3xxx_clearl(0x04 << ((d->irq % 4) * 8),
- REGS_ICOLL_BASE + HW_ICOLL_PRIORITYn + d->irq / 4 * 0x10);
-}
-
-static void stmp37xx_unmask_irq(struct irq_data *d)
-{
- /* IRQ enable */
- stmp3xxx_setl(0x04 << ((d->irq % 4) * 8),
- REGS_ICOLL_BASE + HW_ICOLL_PRIORITYn + d->irq / 4 * 0x10);
-}
-
-static struct irq_chip stmp37xx_chip = {
- .irq_ack = stmp37xx_ack_irq,
- .irq_mask = stmp37xx_mask_irq,
- .irq_unmask = stmp37xx_unmask_irq,
-};
-
-void __init stmp37xx_init_irq(void)
-{
- stmp3xxx_init_irq(&stmp37xx_chip);
-}
-
-/*
- * DMA interrupt handling
- */
-void stmp3xxx_arch_dma_enable_interrupt(int channel)
-{
- switch (STMP3XXX_DMA_BUS(channel)) {
- case STMP3XXX_BUS_APBH:
- stmp3xxx_setl(1 << (8 + STMP3XXX_DMA_CHANNEL(channel)),
- REGS_APBH_BASE + HW_APBH_CTRL1);
- break;
-
- case STMP3XXX_BUS_APBX:
- stmp3xxx_setl(1 << (8 + STMP3XXX_DMA_CHANNEL(channel)),
- REGS_APBX_BASE + HW_APBX_CTRL1);
- break;
- }
-}
-EXPORT_SYMBOL(stmp3xxx_arch_dma_enable_interrupt);
-
-void stmp3xxx_arch_dma_clear_interrupt(int channel)
-{
- switch (STMP3XXX_DMA_BUS(channel)) {
- case STMP3XXX_BUS_APBH:
- stmp3xxx_clearl(1 << STMP3XXX_DMA_CHANNEL(channel),
- REGS_APBH_BASE + HW_APBH_CTRL1);
- break;
-
- case STMP3XXX_BUS_APBX:
- stmp3xxx_clearl(1 << STMP3XXX_DMA_CHANNEL(channel),
- REGS_APBX_BASE + HW_APBX_CTRL1);
- break;
- }
-}
-EXPORT_SYMBOL(stmp3xxx_arch_dma_clear_interrupt);
-
-int stmp3xxx_arch_dma_is_interrupt(int channel)
-{
- int r = 0;
-
- switch (STMP3XXX_DMA_BUS(channel)) {
- case STMP3XXX_BUS_APBH:
- r = __raw_readl(REGS_APBH_BASE + HW_APBH_CTRL1) &
- (1 << STMP3XXX_DMA_CHANNEL(channel));
- break;
-
- case STMP3XXX_BUS_APBX:
- r = __raw_readl(REGS_APBH_BASE + HW_APBH_CTRL1) &
- (1 << STMP3XXX_DMA_CHANNEL(channel));
- break;
- }
- return r;
-}
-EXPORT_SYMBOL(stmp3xxx_arch_dma_is_interrupt);
-
-void stmp3xxx_arch_dma_reset_channel(int channel)
-{
- unsigned chbit = 1 << STMP3XXX_DMA_CHANNEL(channel);
-
- switch (STMP3XXX_DMA_BUS(channel)) {
- case STMP3XXX_BUS_APBH:
- /* Reset channel and wait for it to complete */
- stmp3xxx_setl(chbit << BP_APBH_CTRL0_RESET_CHANNEL,
- REGS_APBH_BASE + HW_APBH_CTRL0);
- while (__raw_readl(REGS_APBH_BASE + HW_APBH_CTRL0) &
- (chbit << BP_APBH_CTRL0_RESET_CHANNEL))
- cpu_relax();
- break;
-
- case STMP3XXX_BUS_APBX:
- stmp3xxx_setl(chbit << BP_APBX_CTRL0_RESET_CHANNEL,
- REGS_APBX_BASE + HW_APBX_CTRL0);
- while (__raw_readl(REGS_APBX_BASE + HW_APBX_CTRL0) &
- (chbit << BP_APBX_CTRL0_RESET_CHANNEL))
- cpu_relax();
- break;
- }
-}
-EXPORT_SYMBOL(stmp3xxx_arch_dma_reset_channel);
-
-void stmp3xxx_arch_dma_freeze(int channel)
-{
- unsigned chbit = 1 << STMP3XXX_DMA_CHANNEL(channel);
-
- switch (STMP3XXX_DMA_BUS(channel)) {
- case STMP3XXX_BUS_APBH:
- stmp3xxx_setl(1 << chbit, REGS_APBH_BASE + HW_APBH_CTRL0);
- break;
- case STMP3XXX_BUS_APBX:
- stmp3xxx_setl(1 << chbit, REGS_APBH_BASE + HW_APBH_CTRL0);
- break;
- }
-}
-EXPORT_SYMBOL(stmp3xxx_arch_dma_freeze);
-
-void stmp3xxx_arch_dma_unfreeze(int channel)
-{
- unsigned chbit = 1 << STMP3XXX_DMA_CHANNEL(channel);
-
- switch (STMP3XXX_DMA_BUS(channel)) {
- case STMP3XXX_BUS_APBH:
- stmp3xxx_clearl(1 << chbit, REGS_APBH_BASE + HW_APBH_CTRL0);
- break;
- case STMP3XXX_BUS_APBX:
- stmp3xxx_clearl(1 << chbit, REGS_APBH_BASE + HW_APBH_CTRL0);
- break;
- }
-}
-EXPORT_SYMBOL(stmp3xxx_arch_dma_unfreeze);
-
-/*
- * The registers are all very closely mapped, so we might as well map them all
- * with a single mapping
- *
- * Logical Physical
- * f0000000 80000000 On-chip registers
- * f1000000 00000000 32k on-chip SRAM
- */
-static struct map_desc stmp37xx_io_desc[] __initdata = {
- {
- .virtual = (u32)STMP3XXX_REGS_BASE,
- .pfn = __phys_to_pfn(STMP3XXX_REGS_PHBASE),
- .length = SZ_1M,
- .type = MT_DEVICE
- },
- {
- .virtual = (u32)STMP3XXX_OCRAM_BASE,
- .pfn = __phys_to_pfn(STMP3XXX_OCRAM_PHBASE),
- .length = STMP3XXX_OCRAM_SIZE,
- .type = MT_DEVICE,
- },
-};
-
-void __init stmp37xx_map_io(void)
-{
- iotable_init(stmp37xx_io_desc, ARRAY_SIZE(stmp37xx_io_desc));
-}
+++ /dev/null
-/*
- * Freescale STMP37XX/STMP378X internal functions and data declarations
- *
- * Embedded Alley Solutions, Inc <source@embeddedalley.com>
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#ifndef __MACH_STMP37XX_H
-#define __MACH_STMP37XX_H
-
-void stmp37xx_map_io(void);
-void stmp37xx_init_irq(void);
-
-#endif /* __MACH_STMP37XX_H */
+++ /dev/null
-/*
- * Freescale STMP37XX development board support
- *
- * Embedded Alley Solutions, Inc <source@embeddedalley.com>
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/stmp3xxx.h>
-#include <mach/pins.h>
-#include <mach/pinmux.h>
-#include "stmp37xx.h"
-
-/*
- * List of STMP37xx development board specific devices
- */
-static struct platform_device *stmp37xx_devb_devices[] = {
- &stmp3xxx_dbguart,
- &stmp3xxx_appuart,
-};
-
-static struct pin_desc dbguart_pins_0[] = {
- { PINID_PWM0, PIN_FUN3, },
- { PINID_PWM1, PIN_FUN3, },
-};
-
-struct pin_desc appuart_pins_0[] = {
- { PINID_UART2_CTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
- { PINID_UART2_RTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
- { PINID_UART2_RX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
- { PINID_UART2_TX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
-};
-
-static struct pin_group appuart_pins[] = {
- [0] = {
- .pins = appuart_pins_0,
- .nr_pins = ARRAY_SIZE(appuart_pins_0),
- },
- /* 37xx has the only app uart */
-};
-
-static struct pin_group dbguart_pins[] = {
- [0] = {
- .pins = dbguart_pins_0,
- .nr_pins = ARRAY_SIZE(dbguart_pins_0),
- },
-};
-
-static int dbguart_pins_control(int id, int request)
-{
- int r = 0;
-
- if (request)
- r = stmp3xxx_request_pin_group(&dbguart_pins[id], "debug uart");
- else
- stmp3xxx_release_pin_group(&dbguart_pins[id], "debug uart");
- return r;
-}
-
-
-static void __init stmp37xx_devb_init(void)
-{
- stmp3xxx_pinmux_init(NR_REAL_IRQS);
-
- /* Init STMP3xxx platform */
- stmp3xxx_init();
-
- stmp3xxx_dbguart.dev.platform_data = dbguart_pins_control;
- stmp3xxx_appuart.dev.platform_data = appuart_pins;
-
- /* Add STMP37xx development board devices */
- platform_add_devices(stmp37xx_devb_devices,
- ARRAY_SIZE(stmp37xx_devb_devices));
-}
-
-MACHINE_START(STMP37XX, "STMP37XX")
- .boot_params = 0x40000100,
- .map_io = stmp37xx_map_io,
- .init_irq = stmp37xx_init_irq,
- .timer = &stmp3xxx_timer,
- .init_machine = stmp37xx_devb_init,
-MACHINE_END
+++ /dev/null
-#ifndef ASMARM_ARCH_SMP_H
-#define ASMARM_ARCH_SMP_H
-
-#include <asm/hardware/gic.h>
-
-/*
- * We use IRQ1 as the IPI
- */
-static inline void smp_cross_call(const struct cpumask *mask, int ipi)
-{
- gic_raise_softirq(mask, ipi);
-}
-
-#endif
#include <linux/io.h>
#include <asm/cacheflush.h>
+#include <asm/hardware/gic.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/smp_scu.h>
for (i = 0; i < ncores; i++)
cpu_set(i, cpu_possible_map);
+
+ set_smp_cross_call(gic_raise_softirq);
}
void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+++ /dev/null
-/*
- * This file is based ARM realview platform.
- * Copyright (C) ARM Limited.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#ifndef ASMARM_ARCH_SMP_H
-#define ASMARM_ARCH_SMP_H
-
-#include <asm/hardware/gic.h>
-
-/* This is required to wakeup the secondary core */
-extern void u8500_secondary_startup(void);
-
-/*
- * We use IRQ1 as the IPI
- */
-static inline void smp_cross_call(const struct cpumask *mask, int ipi)
-{
- gic_raise_softirq(mask, ipi);
-}
-#endif
#include <linux/io.h>
#include <asm/cacheflush.h>
+#include <asm/hardware/gic.h>
#include <asm/smp_scu.h>
#include <mach/hardware.h>
#include <mach/setup.h>
+/* This is called from headsmp.S to wakeup the secondary core */
+extern void u8500_secondary_startup(void);
+
/*
* control for which core is the next to come out of the secondary
* boot "holding pen"
*/
write_pen_release(cpu);
- smp_cross_call(cpumask_of(cpu), 1);
+ gic_raise_softirq(cpumask_of(cpu), 1);
timeout = jiffies + (1 * HZ);
while (time_before(jiffies, timeout)) {
for (i = 0; i < ncores; i++)
set_cpu_possible(i, true);
+
+ set_smp_cross_call(gic_raise_softirq);
}
void __init platform_smp_prepare_cpus(unsigned int max_cpus)
#include <linux/io.h>
#include <linux/gfp.h>
#include <linux/clkdev.h>
+#include <linux/mtd/physmap.h>
#include <asm/system.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
#define VERSATILE_FLASHCTRL (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_FLASH_OFFSET)
-static int versatile_flash_init(void)
-{
- u32 val;
-
- val = __raw_readl(VERSATILE_FLASHCTRL);
- val &= ~VERSATILE_FLASHPROG_FLVPPEN;
- __raw_writel(val, VERSATILE_FLASHCTRL);
-
- return 0;
-}
-
-static void versatile_flash_exit(void)
-{
- u32 val;
-
- val = __raw_readl(VERSATILE_FLASHCTRL);
- val &= ~VERSATILE_FLASHPROG_FLVPPEN;
- __raw_writel(val, VERSATILE_FLASHCTRL);
-}
-
-static void versatile_flash_set_vpp(int on)
+static void versatile_flash_set_vpp(struct platform_device *pdev, int on)
{
u32 val;
__raw_writel(val, VERSATILE_FLASHCTRL);
}
-static struct flash_platform_data versatile_flash_data = {
- .map_name = "cfi_probe",
+static struct physmap_flash_data versatile_flash_data = {
.width = 4,
- .init = versatile_flash_init,
- .exit = versatile_flash_exit,
.set_vpp = versatile_flash_set_vpp,
};
};
static struct platform_device versatile_flash_device = {
- .name = "armflash",
+ .name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &versatile_flash_data,
for (i = 0; i < ncores; ++i)
set_cpu_possible(i, true);
+
+ set_smp_cross_call(gic_raise_softirq);
}
static void ct_ca9x4_smp_enable(unsigned int max_cpus)
+++ /dev/null
-#ifndef __MACH_SMP_H
-#define __MACH_SMP_H
-
-#include <asm/hardware/gic.h>
-
-/*
- * We use IRQ1 as the IPI
- */
-static inline void smp_cross_call(const struct cpumask *mask, int ipi)
-{
- gic_raise_softirq(mask, ipi);
-}
-#endif
#include <linux/sysdev.h>
#include <linux/usb/isp1760.h>
#include <linux/clkdev.h>
+#include <linux/mtd/physmap.h>
#include <asm/mach-types.h>
#include <asm/sizes.h>
#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <asm/hardware/arm_timer.h>
.dev.platform_data = &v2m_usb_config,
};
-static int v2m_flash_init(void)
-{
- writel(0, MMIO_P2V(V2M_SYS_FLASH));
- return 0;
-}
-
-static void v2m_flash_exit(void)
-{
- writel(0, MMIO_P2V(V2M_SYS_FLASH));
-}
-
-static void v2m_flash_set_vpp(int on)
+static void v2m_flash_set_vpp(struct platform_device *pdev, int on)
{
writel(on != 0, MMIO_P2V(V2M_SYS_FLASH));
}
-static struct flash_platform_data v2m_flash_data = {
- .map_name = "cfi_probe",
+static struct physmap_flash_data v2m_flash_data = {
.width = 4,
- .init = v2m_flash_init,
- .exit = v2m_flash_exit,
.set_vpp = v2m_flash_set_vpp,
};
};
static struct platform_device v2m_flash_device = {
- .name = "armflash",
+ .name = "physmap-flash",
.id = -1,
.resource = v2m_flash_resources,
.num_resources = ARRAY_SIZE(v2m_flash_resources),
}
}
+#ifdef CONFIG_ZONE_DMA
+static void __init arm_adjust_dma_zone(unsigned long *size, unsigned long *hole,
+ unsigned long dma_size)
+{
+ if (size[0] <= dma_size)
+ return;
+
+ size[ZONE_NORMAL] = size[0] - dma_size;
+ size[ZONE_DMA] = dma_size;
+ hole[ZONE_NORMAL] = hole[0];
+ hole[ZONE_DMA] = 0;
+}
+#endif
+
static void __init arm_bootmem_free(unsigned long min, unsigned long max_low,
unsigned long max_high)
{
#endif
}
+#ifdef ARM_DMA_ZONE_SIZE
+#ifndef CONFIG_ZONE_DMA
+#error ARM_DMA_ZONE_SIZE set but no DMA zone to limit allocations
+#endif
+
/*
* Adjust the sizes according to any special requirements for
* this machine type.
*/
- arch_adjust_zones(zone_size, zhole_size);
+ arm_adjust_dma_zone(zone_size, zhole_size,
+ ARM_DMA_ZONE_SIZE >> PAGE_SHIFT);
+#endif
free_area_init_node(0, zone_size, min, zhole_size);
}
#include <linux/mtd/map.h>
-extern void omap1_set_vpp(struct map_info *map, int enable);
+extern void omap1_set_vpp(struct platform_device *pdev, int enable);
#endif
+++ /dev/null
-/*
- * OMAP4 machine specific smp.h
- *
- * Copyright (C) 2009 Texas Instruments, Inc.
- *
- * Author:
- * Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * Interface functions needed for the SMP. This file is based on arm
- * realview smp platform.
- * Copyright (c) 2003 ARM Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef OMAP_ARCH_SMP_H
-#define OMAP_ARCH_SMP_H
-
-#include <asm/hardware/gic.h>
-
-/* Needed for secondary core boot */
-extern void omap_secondary_startup(void);
-extern u32 omap_modify_auxcoreboot0(u32 set_mask, u32 clear_mask);
-extern void omap_auxcoreboot_addr(u32 cpu_addr);
-extern u32 omap_read_auxcoreboot0(void);
-
-/*
- * We use Soft IRQ1 as the IPI
- */
-static inline void smp_cross_call(const struct cpumask *mask, int ipi)
-{
- gic_raise_softirq(mask, ipi);
-}
-
-#endif
+++ /dev/null
-if ARCH_STMP3XXX
-
-menu "Freescale STMP3xxx implementations"
-
-choice
- prompt "Select STMP3xxx chip family"
-
-config ARCH_STMP37XX
- bool "Freescale SMTP37xx"
- select CPU_ARM926T
- ---help---
- STMP37xx refers to 3700 through 3769 chips
-
-config ARCH_STMP378X
- bool "Freescale STMP378x"
- select CPU_ARM926T
- ---help---
- STMP378x refers to 3780 through 3789 chips
-
-endchoice
-
-choice
- prompt "Select STMP3xxx board type"
-
-config MACH_STMP37XX
- depends on ARCH_STMP37XX
- bool "Freescale STMP37xx development board"
-
-config MACH_STMP378X
- depends on ARCH_STMP378X
- bool "Freescale STMP378x development board"
-
-endchoice
-
-endmenu
-
-endif
+++ /dev/null
-#
-# Makefile for the linux kernel.
-#
-# Object file lists.
-obj-y += core.o timer.o irq.o dma.o clock.o pinmux.o devices.o
+++ /dev/null
-/*
- * Clock manipulation routines for Freescale STMP37XX/STMP378X
- *
- * Author: Vitaly Wool <vital@embeddedalley.com>
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#define DEBUG
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/spinlock.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-
-#include <asm/mach-types.h>
-#include <mach/platform.h>
-#include <mach/regs-clkctrl.h>
-
-#include "clock.h"
-
-static DEFINE_SPINLOCK(clocks_lock);
-
-static struct clk osc_24M;
-static struct clk pll_clk;
-static struct clk cpu_clk;
-static struct clk hclk;
-
-static int propagate_rate(struct clk *);
-
-static inline int clk_is_busy(struct clk *clk)
-{
- return __raw_readl(clk->busy_reg) & (1 << clk->busy_bit);
-}
-
-static inline int clk_good(struct clk *clk)
-{
- return clk && !IS_ERR(clk) && clk->ops;
-}
-
-static int std_clk_enable(struct clk *clk)
-{
- if (clk->enable_reg) {
- u32 clk_reg = __raw_readl(clk->enable_reg);
- if (clk->enable_negate)
- clk_reg &= ~(1 << clk->enable_shift);
- else
- clk_reg |= (1 << clk->enable_shift);
- __raw_writel(clk_reg, clk->enable_reg);
- if (clk->enable_wait)
- udelay(clk->enable_wait);
- return 0;
- } else
- return -EINVAL;
-}
-
-static int std_clk_disable(struct clk *clk)
-{
- if (clk->enable_reg) {
- u32 clk_reg = __raw_readl(clk->enable_reg);
- if (clk->enable_negate)
- clk_reg |= (1 << clk->enable_shift);
- else
- clk_reg &= ~(1 << clk->enable_shift);
- __raw_writel(clk_reg, clk->enable_reg);
- return 0;
- } else
- return -EINVAL;
-}
-
-static int io_set_rate(struct clk *clk, u32 rate)
-{
- u32 reg_frac, clkctrl_frac;
- int i, ret = 0, mask = 0x1f;
-
- clkctrl_frac = (clk->parent->rate * 18 + rate - 1) / rate;
-
- if (clkctrl_frac < 18 || clkctrl_frac > 35) {
- ret = -EINVAL;
- goto out;
- }
-
- reg_frac = __raw_readl(clk->scale_reg);
- reg_frac &= ~(mask << clk->scale_shift);
- __raw_writel(reg_frac | (clkctrl_frac << clk->scale_shift),
- clk->scale_reg);
- if (clk->busy_reg) {
- for (i = 10000; i; i--)
- if (!clk_is_busy(clk))
- break;
- if (!i)
- ret = -ETIMEDOUT;
- else
- ret = 0;
- }
-out:
- return ret;
-}
-
-static long io_get_rate(struct clk *clk)
-{
- long rate = clk->parent->rate * 18;
- int mask = 0x1f;
-
- rate /= (__raw_readl(clk->scale_reg) >> clk->scale_shift) & mask;
- clk->rate = rate;
-
- return rate;
-}
-
-static long per_get_rate(struct clk *clk)
-{
- long rate = clk->parent->rate;
- long div;
- const int mask = 0xff;
-
- if (clk->enable_reg &&
- !(__raw_readl(clk->enable_reg) & clk->enable_shift))
- clk->rate = 0;
- else {
- div = (__raw_readl(clk->scale_reg) >> clk->scale_shift) & mask;
- if (div)
- rate /= div;
- clk->rate = rate;
- }
-
- return clk->rate;
-}
-
-static int per_set_rate(struct clk *clk, u32 rate)
-{
- int ret = -EINVAL;
- int div = (clk->parent->rate + rate - 1) / rate;
- u32 reg_frac;
- const int mask = 0xff;
- int try = 10;
- int i = -1;
-
- if (div == 0 || div > mask)
- goto out;
-
- reg_frac = __raw_readl(clk->scale_reg);
- reg_frac &= ~(mask << clk->scale_shift);
-
- while (try--) {
- __raw_writel(reg_frac | (div << clk->scale_shift),
- clk->scale_reg);
-
- if (clk->busy_reg) {
- for (i = 10000; i; i--)
- if (!clk_is_busy(clk))
- break;
- }
- if (i)
- break;
- }
-
- if (!i)
- ret = -ETIMEDOUT;
- else
- ret = 0;
-
-out:
- if (ret != 0)
- printk(KERN_ERR "%s: error %d\n", __func__, ret);
- return ret;
-}
-
-static long lcdif_get_rate(struct clk *clk)
-{
- long rate = clk->parent->rate;
- long div;
- const int mask = 0xff;
-
- div = (__raw_readl(clk->scale_reg) >> clk->scale_shift) & mask;
- if (div) {
- rate /= div;
- div = (__raw_readl(REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC) &
- BM_CLKCTRL_FRAC_PIXFRAC) >> BP_CLKCTRL_FRAC_PIXFRAC;
- rate /= div;
- }
- clk->rate = rate;
-
- return rate;
-}
-
-static int lcdif_set_rate(struct clk *clk, u32 rate)
-{
- int ret = 0;
- /*
- * On 3700, we can get most timings exact by modifying ref_pix
- * and the divider, but keeping the phase timings at 1 (2
- * phases per cycle).
- *
- * ref_pix can be between 480e6*18/35=246.9MHz and 480e6*18/18=480MHz,
- * which is between 18/(18*480e6)=2.084ns and 35/(18*480e6)=4.050ns.
- *
- * ns_cycle >= 2*18e3/(18*480) = 25/6
- * ns_cycle <= 2*35e3/(18*480) = 875/108
- *
- * Multiply the ns_cycle by 'div' to lengthen it until it fits the
- * bounds. This is the divider we'll use after ref_pix.
- *
- * 6 * ns_cycle >= 25 * div
- * 108 * ns_cycle <= 875 * div
- */
- u32 ns_cycle = 1000000 / rate;
- u32 div, reg_val;
- u32 lowest_result = (u32) -1;
- u32 lowest_div = 0, lowest_fracdiv = 0;
-
- for (div = 1; div < 256; ++div) {
- u32 fracdiv;
- u32 ps_result;
- int lower_bound = 6 * ns_cycle >= 25 * div;
- int upper_bound = 108 * ns_cycle <= 875 * div;
- if (!lower_bound)
- break;
- if (!upper_bound)
- continue;
- /*
- * Found a matching div. Calculate fractional divider needed,
- * rounded up.
- */
- fracdiv = ((clk->parent->rate / 1000 * 18 / 2) *
- ns_cycle + 1000 * div - 1) /
- (1000 * div);
- if (fracdiv < 18 || fracdiv > 35) {
- ret = -EINVAL;
- goto out;
- }
- /* Calculate the actual cycle time this results in */
- ps_result = 6250 * div * fracdiv / 27;
-
- /* Use the fastest result that doesn't break ns_cycle */
- if (ps_result <= lowest_result) {
- lowest_result = ps_result;
- lowest_div = div;
- lowest_fracdiv = fracdiv;
- }
- }
-
- if (div >= 256 || lowest_result == (u32) -1) {
- ret = -EINVAL;
- goto out;
- }
- pr_debug("Programming PFD=%u,DIV=%u ref_pix=%uMHz "
- "PIXCLK=%uMHz cycle=%u.%03uns\n",
- lowest_fracdiv, lowest_div,
- 480*18/lowest_fracdiv, 480*18/lowest_fracdiv/lowest_div,
- lowest_result / 1000, lowest_result % 1000);
-
- /* Program ref_pix phase fractional divider */
- reg_val = __raw_readl(REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC);
- reg_val &= ~BM_CLKCTRL_FRAC_PIXFRAC;
- reg_val |= BF(lowest_fracdiv, CLKCTRL_FRAC_PIXFRAC);
- __raw_writel(reg_val, REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC);
-
- /* Ungate PFD */
- stmp3xxx_clearl(BM_CLKCTRL_FRAC_CLKGATEPIX,
- REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC);
-
- /* Program pix divider */
- reg_val = __raw_readl(clk->scale_reg);
- reg_val &= ~(BM_CLKCTRL_PIX_DIV | BM_CLKCTRL_PIX_CLKGATE);
- reg_val |= BF(lowest_div, CLKCTRL_PIX_DIV);
- __raw_writel(reg_val, clk->scale_reg);
-
- /* Wait for divider update */
- if (clk->busy_reg) {
- int i;
- for (i = 10000; i; i--)
- if (!clk_is_busy(clk))
- break;
- if (!i) {
- ret = -ETIMEDOUT;
- goto out;
- }
- }
-
- /* Switch to ref_pix source */
- reg_val = __raw_readl(REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ);
- reg_val &= ~BM_CLKCTRL_CLKSEQ_BYPASS_PIX;
- __raw_writel(reg_val, REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ);
-
-out:
- return ret;
-}
-
-
-static int cpu_set_rate(struct clk *clk, u32 rate)
-{
- u32 reg_val;
-
- if (rate < 24000)
- return -EINVAL;
- else if (rate == 24000) {
- /* switch to the 24M source */
- clk_set_parent(clk, &osc_24M);
- } else {
- int i;
- u32 clkctrl_cpu = 1;
- u32 c = clkctrl_cpu;
- u32 clkctrl_frac = 1;
- u32 val;
- for ( ; c < 0x40; c++) {
- u32 f = (pll_clk.rate*18/c + rate/2) / rate;
- int s1, s2;
-
- if (f < 18 || f > 35)
- continue;
- s1 = pll_clk.rate*18/clkctrl_frac/clkctrl_cpu - rate;
- s2 = pll_clk.rate*18/c/f - rate;
- pr_debug("%s: s1 %d, s2 %d\n", __func__, s1, s2);
- if (abs(s1) > abs(s2)) {
- clkctrl_cpu = c;
- clkctrl_frac = f;
- }
- if (s2 == 0)
- break;
- };
- pr_debug("%s: clkctrl_cpu %d, clkctrl_frac %d\n", __func__,
- clkctrl_cpu, clkctrl_frac);
- if (c == 0x40) {
- int d = pll_clk.rate*18/clkctrl_frac/clkctrl_cpu -
- rate;
- if (abs(d) > 100 ||
- clkctrl_frac < 18 || clkctrl_frac > 35)
- return -EINVAL;
- }
-
- /* 4.6.2 */
- val = __raw_readl(clk->scale_reg);
- val &= ~(0x3f << clk->scale_shift);
- val |= clkctrl_frac;
- clk_set_parent(clk, &osc_24M);
- udelay(10);
- __raw_writel(val, clk->scale_reg);
- /* ungate */
- __raw_writel(1<<7, clk->scale_reg + 8);
- /* write clkctrl_cpu */
- clk->saved_div = clkctrl_cpu;
-
- reg_val = __raw_readl(REGS_CLKCTRL_BASE + HW_CLKCTRL_CPU);
- reg_val &= ~0x3F;
- reg_val |= clkctrl_cpu;
- __raw_writel(reg_val, REGS_CLKCTRL_BASE + HW_CLKCTRL_CPU);
-
- for (i = 10000; i; i--)
- if (!clk_is_busy(clk))
- break;
- if (!i) {
- printk(KERN_ERR "couldn't set up CPU divisor\n");
- return -ETIMEDOUT;
- }
- clk_set_parent(clk, &pll_clk);
- clk->saved_div = 0;
- udelay(10);
- }
- return 0;
-}
-
-static long cpu_get_rate(struct clk *clk)
-{
- long rate = clk->parent->rate * 18;
-
- rate /= (__raw_readl(clk->scale_reg) >> clk->scale_shift) & 0x3f;
- rate /= __raw_readl(REGS_CLKCTRL_BASE + HW_CLKCTRL_CPU) & 0x3f;
- rate = ((rate + 9) / 10) * 10;
- clk->rate = rate;
-
- return rate;
-}
-
-static long cpu_round_rate(struct clk *clk, u32 rate)
-{
- unsigned long r = 0;
-
- if (rate <= 24000)
- r = 24000;
- else {
- u32 clkctrl_cpu = 1;
- u32 clkctrl_frac;
- do {
- clkctrl_frac =
- (pll_clk.rate*18 / clkctrl_cpu + rate/2) / rate;
- if (clkctrl_frac > 35)
- continue;
- if (pll_clk.rate*18 / clkctrl_frac / clkctrl_cpu/10 ==
- rate / 10)
- break;
- } while (pll_clk.rate / 2 >= clkctrl_cpu++ * rate);
- if (pll_clk.rate / 2 < (clkctrl_cpu - 1) * rate)
- clkctrl_cpu--;
- pr_debug("%s: clkctrl_cpu %d, clkctrl_frac %d\n", __func__,
- clkctrl_cpu, clkctrl_frac);
- if (clkctrl_frac < 18)
- clkctrl_frac = 18;
- if (clkctrl_frac > 35)
- clkctrl_frac = 35;
-
- r = pll_clk.rate * 18;
- r /= clkctrl_frac;
- r /= clkctrl_cpu;
- r = 10 * ((r + 9) / 10);
- }
- return r;
-}
-
-static long emi_get_rate(struct clk *clk)
-{
- long rate = clk->parent->rate * 18;
-
- rate /= (__raw_readl(clk->scale_reg) >> clk->scale_shift) & 0x3f;
- rate /= __raw_readl(REGS_CLKCTRL_BASE + HW_CLKCTRL_EMI) & 0x3f;
- clk->rate = rate;
-
- return rate;
-}
-
-static int clkseq_set_parent(struct clk *clk, struct clk *parent)
-{
- int ret = -EINVAL;
- int shift = 8;
-
- /* bypass? */
- if (parent == &osc_24M)
- shift = 4;
-
- if (clk->bypass_reg) {
-#ifdef CONFIG_ARCH_STMP378X
- u32 hbus_val, cpu_val;
-
- if (clk == &cpu_clk && shift == 4) {
- hbus_val = __raw_readl(REGS_CLKCTRL_BASE +
- HW_CLKCTRL_HBUS);
- cpu_val = __raw_readl(REGS_CLKCTRL_BASE +
- HW_CLKCTRL_CPU);
-
- hbus_val &= ~(BM_CLKCTRL_HBUS_DIV_FRAC_EN |
- BM_CLKCTRL_HBUS_DIV);
- clk->saved_div = cpu_val & BM_CLKCTRL_CPU_DIV_CPU;
- cpu_val &= ~BM_CLKCTRL_CPU_DIV_CPU;
- cpu_val |= 1;
-
- if (machine_is_stmp378x()) {
- __raw_writel(hbus_val,
- REGS_CLKCTRL_BASE + HW_CLKCTRL_HBUS);
- __raw_writel(cpu_val,
- REGS_CLKCTRL_BASE + HW_CLKCTRL_CPU);
- hclk.rate = 0;
- }
- } else if (clk == &cpu_clk && shift == 8) {
- hbus_val = __raw_readl(REGS_CLKCTRL_BASE +
- HW_CLKCTRL_HBUS);
- cpu_val = __raw_readl(REGS_CLKCTRL_BASE +
- HW_CLKCTRL_CPU);
- hbus_val &= ~(BM_CLKCTRL_HBUS_DIV_FRAC_EN |
- BM_CLKCTRL_HBUS_DIV);
- hbus_val |= 2;
- cpu_val &= ~BM_CLKCTRL_CPU_DIV_CPU;
- if (clk->saved_div)
- cpu_val |= clk->saved_div;
- else
- cpu_val |= 2;
-
- if (machine_is_stmp378x()) {
- __raw_writel(hbus_val,
- REGS_CLKCTRL_BASE + HW_CLKCTRL_HBUS);
- __raw_writel(cpu_val,
- REGS_CLKCTRL_BASE + HW_CLKCTRL_CPU);
- hclk.rate = 0;
- }
- }
-#endif
- __raw_writel(1 << clk->bypass_shift, clk->bypass_reg + shift);
-
- ret = 0;
- }
-
- return ret;
-}
-
-static int hbus_set_rate(struct clk *clk, u32 rate)
-{
- u8 div = 0;
- int is_frac = 0;
- u32 clkctrl_hbus;
- struct clk *parent = clk->parent;
-
- pr_debug("%s: rate %d, parent rate %d\n", __func__, rate,
- parent->rate);
-
- if (rate > parent->rate)
- return -EINVAL;
-
- if (((parent->rate + rate/2) / rate) * rate != parent->rate &&
- parent->rate / rate < 32) {
- pr_debug("%s: switching to fractional mode\n", __func__);
- is_frac = 1;
- }
-
- if (is_frac)
- div = (32 * rate + parent->rate / 2) / parent->rate;
- else
- div = (parent->rate + rate - 1) / rate;
- pr_debug("%s: div calculated is %d\n", __func__, div);
- if (!div || div > 0x1f)
- return -EINVAL;
-
- clk_set_parent(&cpu_clk, &osc_24M);
- udelay(10);
- clkctrl_hbus = __raw_readl(clk->scale_reg);
- clkctrl_hbus &= ~0x3f;
- clkctrl_hbus |= div;
- clkctrl_hbus |= (is_frac << 5);
-
- __raw_writel(clkctrl_hbus, clk->scale_reg);
- if (clk->busy_reg) {
- int i;
- for (i = 10000; i; i--)
- if (!clk_is_busy(clk))
- break;
- if (!i) {
- printk(KERN_ERR "couldn't set up CPU divisor\n");
- return -ETIMEDOUT;
- }
- }
- clk_set_parent(&cpu_clk, &pll_clk);
- __raw_writel(clkctrl_hbus, clk->scale_reg);
- udelay(10);
- return 0;
-}
-
-static long hbus_get_rate(struct clk *clk)
-{
- long rate = clk->parent->rate;
-
- if (__raw_readl(clk->scale_reg) & 0x20) {
- rate *= __raw_readl(clk->scale_reg) & 0x1f;
- rate /= 32;
- } else
- rate /= __raw_readl(clk->scale_reg) & 0x1f;
- clk->rate = rate;
-
- return rate;
-}
-
-static int xbus_set_rate(struct clk *clk, u32 rate)
-{
- u16 div = 0;
- u32 clkctrl_xbus;
-
- pr_debug("%s: rate %d, parent rate %d\n", __func__, rate,
- clk->parent->rate);
-
- div = (clk->parent->rate + rate - 1) / rate;
- pr_debug("%s: div calculated is %d\n", __func__, div);
- if (!div || div > 0x3ff)
- return -EINVAL;
-
- clkctrl_xbus = __raw_readl(clk->scale_reg);
- clkctrl_xbus &= ~0x3ff;
- clkctrl_xbus |= div;
- __raw_writel(clkctrl_xbus, clk->scale_reg);
- if (clk->busy_reg) {
- int i;
- for (i = 10000; i; i--)
- if (!clk_is_busy(clk))
- break;
- if (!i) {
- printk(KERN_ERR "couldn't set up xbus divisor\n");
- return -ETIMEDOUT;
- }
- }
- return 0;
-}
-
-static long xbus_get_rate(struct clk *clk)
-{
- long rate = clk->parent->rate;
-
- rate /= __raw_readl(clk->scale_reg) & 0x3ff;
- clk->rate = rate;
-
- return rate;
-}
-
-
-/* Clock ops */
-
-static struct clk_ops std_ops = {
- .enable = std_clk_enable,
- .disable = std_clk_disable,
- .get_rate = per_get_rate,
- .set_rate = per_set_rate,
- .set_parent = clkseq_set_parent,
-};
-
-static struct clk_ops min_ops = {
- .enable = std_clk_enable,
- .disable = std_clk_disable,
-};
-
-static struct clk_ops cpu_ops = {
- .enable = std_clk_enable,
- .disable = std_clk_disable,
- .get_rate = cpu_get_rate,
- .set_rate = cpu_set_rate,
- .round_rate = cpu_round_rate,
- .set_parent = clkseq_set_parent,
-};
-
-static struct clk_ops io_ops = {
- .enable = std_clk_enable,
- .disable = std_clk_disable,
- .get_rate = io_get_rate,
- .set_rate = io_set_rate,
-};
-
-static struct clk_ops hbus_ops = {
- .get_rate = hbus_get_rate,
- .set_rate = hbus_set_rate,
-};
-
-static struct clk_ops xbus_ops = {
- .get_rate = xbus_get_rate,
- .set_rate = xbus_set_rate,
-};
-
-static struct clk_ops lcdif_ops = {
- .enable = std_clk_enable,
- .disable = std_clk_disable,
- .get_rate = lcdif_get_rate,
- .set_rate = lcdif_set_rate,
- .set_parent = clkseq_set_parent,
-};
-
-static struct clk_ops emi_ops = {
- .get_rate = emi_get_rate,
-};
-
-/* List of on-chip clocks */
-
-static struct clk osc_24M = {
- .flags = FIXED_RATE | ENABLED,
- .rate = 24000,
-};
-
-static struct clk pll_clk = {
- .parent = &osc_24M,
- .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_PLLCTRL0,
- .enable_shift = 16,
- .enable_wait = 10,
- .flags = FIXED_RATE | ENABLED,
- .rate = 480000,
- .ops = &min_ops,
-};
-
-static struct clk cpu_clk = {
- .parent = &pll_clk,
- .scale_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC,
- .scale_shift = 0,
- .bypass_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ,
- .bypass_shift = 7,
- .busy_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_CPU,
- .busy_bit = 28,
- .flags = RATE_PROPAGATES | ENABLED,
- .ops = &cpu_ops,
-};
-
-static struct clk io_clk = {
- .parent = &pll_clk,
- .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC,
- .enable_shift = 31,
- .enable_negate = 1,
- .scale_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC,
- .scale_shift = 24,
- .flags = RATE_PROPAGATES | ENABLED,
- .ops = &io_ops,
-};
-
-static struct clk hclk = {
- .parent = &cpu_clk,
- .scale_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_HBUS,
- .bypass_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ,
- .bypass_shift = 7,
- .busy_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_HBUS,
- .busy_bit = 29,
- .flags = RATE_PROPAGATES | ENABLED,
- .ops = &hbus_ops,
-};
-
-static struct clk xclk = {
- .parent = &osc_24M,
- .scale_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_XBUS,
- .busy_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_XBUS,
- .busy_bit = 31,
- .flags = RATE_PROPAGATES | ENABLED,
- .ops = &xbus_ops,
-};
-
-static struct clk uart_clk = {
- .parent = &xclk,
- .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_XTAL,
- .enable_shift = 31,
- .enable_negate = 1,
- .flags = ENABLED,
- .ops = &min_ops,
-};
-
-static struct clk audio_clk = {
- .parent = &xclk,
- .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_XTAL,
- .enable_shift = 30,
- .enable_negate = 1,
- .ops = &min_ops,
-};
-
-static struct clk pwm_clk = {
- .parent = &xclk,
- .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_XTAL,
- .enable_shift = 29,
- .enable_negate = 1,
- .ops = &min_ops,
-};
-
-static struct clk dri_clk = {
- .parent = &xclk,
- .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_XTAL,
- .enable_shift = 28,
- .enable_negate = 1,
- .ops = &min_ops,
-};
-
-static struct clk digctl_clk = {
- .parent = &xclk,
- .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_XTAL,
- .enable_shift = 27,
- .enable_negate = 1,
- .ops = &min_ops,
-};
-
-static struct clk timer_clk = {
- .parent = &xclk,
- .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_XTAL,
- .enable_shift = 26,
- .enable_negate = 1,
- .flags = ENABLED,
- .ops = &min_ops,
-};
-
-static struct clk lcdif_clk = {
- .parent = &pll_clk,
- .scale_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_PIX,
- .busy_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_PIX,
- .busy_bit = 29,
- .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_PIX,
- .enable_shift = 31,
- .enable_negate = 1,
- .bypass_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ,
- .bypass_shift = 1,
- .flags = NEEDS_SET_PARENT,
- .ops = &lcdif_ops,
-};
-
-static struct clk ssp_clk = {
- .parent = &io_clk,
- .scale_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_SSP,
- .busy_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_SSP,
- .busy_bit = 29,
- .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_SSP,
- .enable_shift = 31,
- .bypass_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ,
- .bypass_shift = 5,
- .enable_negate = 1,
- .flags = NEEDS_SET_PARENT,
- .ops = &std_ops,
-};
-
-static struct clk gpmi_clk = {
- .parent = &io_clk,
- .scale_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_GPMI,
- .busy_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_GPMI,
- .busy_bit = 29,
- .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_GPMI,
- .enable_shift = 31,
- .enable_negate = 1,
- .bypass_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ,
- .bypass_shift = 4,
- .flags = NEEDS_SET_PARENT,
- .ops = &std_ops,
-};
-
-static struct clk spdif_clk = {
- .parent = &pll_clk,
- .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_SPDIF,
- .enable_shift = 31,
- .enable_negate = 1,
- .ops = &min_ops,
-};
-
-static struct clk emi_clk = {
- .parent = &pll_clk,
- .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_EMI,
- .enable_shift = 31,
- .enable_negate = 1,
- .scale_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC,
- .scale_shift = 8,
- .busy_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_EMI,
- .busy_bit = 28,
- .bypass_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ,
- .bypass_shift = 6,
- .flags = ENABLED,
- .ops = &emi_ops,
-};
-
-static struct clk ir_clk = {
- .parent = &io_clk,
- .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_IR,
- .enable_shift = 31,
- .enable_negate = 1,
- .bypass_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ,
- .bypass_shift = 3,
- .ops = &min_ops,
-};
-
-static struct clk saif_clk = {
- .parent = &pll_clk,
- .scale_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_SAIF,
- .busy_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_SAIF,
- .busy_bit = 29,
- .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_SAIF,
- .enable_shift = 31,
- .enable_negate = 1,
- .bypass_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ,
- .bypass_shift = 0,
- .ops = &std_ops,
-};
-
-static struct clk usb_clk = {
- .parent = &pll_clk,
- .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_PLLCTRL0,
- .enable_shift = 18,
- .enable_negate = 1,
- .ops = &min_ops,
-};
-
-/* list of all the clocks */
-static struct clk_lookup onchip_clks[] = {
- {
- .con_id = "osc_24M",
- .clk = &osc_24M,
- }, {
- .con_id = "pll",
- .clk = &pll_clk,
- }, {
- .con_id = "cpu",
- .clk = &cpu_clk,
- }, {
- .con_id = "hclk",
- .clk = &hclk,
- }, {
- .con_id = "xclk",
- .clk = &xclk,
- }, {
- .con_id = "io",
- .clk = &io_clk,
- }, {
- .con_id = "uart",
- .clk = &uart_clk,
- }, {
- .con_id = "audio",
- .clk = &audio_clk,
- }, {
- .con_id = "pwm",
- .clk = &pwm_clk,
- }, {
- .con_id = "dri",
- .clk = &dri_clk,
- }, {
- .con_id = "digctl",
- .clk = &digctl_clk,
- }, {
- .con_id = "timer",
- .clk = &timer_clk,
- }, {
- .con_id = "lcdif",
- .clk = &lcdif_clk,
- }, {
- .con_id = "ssp",
- .clk = &ssp_clk,
- }, {
- .con_id = "gpmi",
- .clk = &gpmi_clk,
- }, {
- .con_id = "spdif",
- .clk = &spdif_clk,
- }, {
- .con_id = "emi",
- .clk = &emi_clk,
- }, {
- .con_id = "ir",
- .clk = &ir_clk,
- }, {
- .con_id = "saif",
- .clk = &saif_clk,
- }, {
- .con_id = "usb",
- .clk = &usb_clk,
- },
-};
-
-static int __init propagate_rate(struct clk *clk)
-{
- struct clk_lookup *cl;
-
- for (cl = onchip_clks; cl < onchip_clks + ARRAY_SIZE(onchip_clks);
- cl++) {
- if (unlikely(!clk_good(cl->clk)))
- continue;
- if (cl->clk->parent == clk && cl->clk->ops->get_rate) {
- cl->clk->ops->get_rate(cl->clk);
- if (cl->clk->flags & RATE_PROPAGATES)
- propagate_rate(cl->clk);
- }
- }
-
- return 0;
-}
-
-/* Exported API */
-unsigned long clk_get_rate(struct clk *clk)
-{
- if (unlikely(!clk_good(clk)))
- return 0;
-
- if (clk->rate != 0)
- return clk->rate;
-
- if (clk->ops->get_rate != NULL)
- return clk->ops->get_rate(clk);
-
- return clk_get_rate(clk->parent);
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
- if (unlikely(!clk_good(clk)))
- return 0;
-
- if (clk->ops->round_rate)
- return clk->ops->round_rate(clk, rate);
-
- return 0;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-static inline int close_enough(long rate1, long rate2)
-{
- return rate1 && !((rate2 - rate1) * 1000 / rate1);
-}
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
- int ret = -EINVAL;
-
- if (unlikely(!clk_good(clk)))
- goto out;
-
- if (clk->flags & FIXED_RATE || !clk->ops->set_rate)
- goto out;
-
- else if (!close_enough(clk->rate, rate)) {
- ret = clk->ops->set_rate(clk, rate);
- if (ret < 0)
- goto out;
- clk->rate = rate;
- if (clk->flags & RATE_PROPAGATES)
- propagate_rate(clk);
- } else
- ret = 0;
-
-out:
- return ret;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-int clk_enable(struct clk *clk)
-{
- unsigned long clocks_flags;
-
- if (unlikely(!clk_good(clk)))
- return -EINVAL;
-
- if (clk->parent)
- clk_enable(clk->parent);
-
- spin_lock_irqsave(&clocks_lock, clocks_flags);
-
- clk->usage++;
- if (clk->ops && clk->ops->enable)
- clk->ops->enable(clk);
-
- spin_unlock_irqrestore(&clocks_lock, clocks_flags);
- return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-static void local_clk_disable(struct clk *clk)
-{
- if (unlikely(!clk_good(clk)))
- return;
-
- if (clk->usage == 0 && clk->ops->disable)
- clk->ops->disable(clk);
-
- if (clk->parent)
- local_clk_disable(clk->parent);
-}
-
-void clk_disable(struct clk *clk)
-{
- unsigned long clocks_flags;
-
- if (unlikely(!clk_good(clk)))
- return;
-
- spin_lock_irqsave(&clocks_lock, clocks_flags);
-
- if ((--clk->usage) == 0 && clk->ops->disable)
- clk->ops->disable(clk);
-
- spin_unlock_irqrestore(&clocks_lock, clocks_flags);
- if (clk->parent)
- clk_disable(clk->parent);
-}
-EXPORT_SYMBOL(clk_disable);
-
-/* Some additional API */
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
- int ret = -ENODEV;
- unsigned long clocks_flags;
-
- if (unlikely(!clk_good(clk)))
- goto out;
-
- if (!clk->ops->set_parent)
- goto out;
-
- spin_lock_irqsave(&clocks_lock, clocks_flags);
-
- ret = clk->ops->set_parent(clk, parent);
- if (!ret) {
- /* disable if usage count is 0 */
- local_clk_disable(parent);
-
- parent->usage += clk->usage;
- clk->parent->usage -= clk->usage;
-
- /* disable if new usage count is 0 */
- local_clk_disable(clk->parent);
-
- clk->parent = parent;
- }
- spin_unlock_irqrestore(&clocks_lock, clocks_flags);
-
-out:
- return ret;
-}
-EXPORT_SYMBOL(clk_set_parent);
-
-struct clk *clk_get_parent(struct clk *clk)
-{
- if (unlikely(!clk_good(clk)))
- return NULL;
- return clk->parent;
-}
-EXPORT_SYMBOL(clk_get_parent);
-
-static int __init clk_init(void)
-{
- struct clk_lookup *cl;
- struct clk_ops *ops;
-
- spin_lock_init(&clocks_lock);
-
- for (cl = onchip_clks; cl < onchip_clks + ARRAY_SIZE(onchip_clks);
- cl++) {
- if (cl->clk->flags & ENABLED)
- clk_enable(cl->clk);
- else
- local_clk_disable(cl->clk);
-
- ops = cl->clk->ops;
-
- if ((cl->clk->flags & NEEDS_INITIALIZATION) &&
- ops && ops->set_rate)
- ops->set_rate(cl->clk, cl->clk->rate);
-
- if (cl->clk->flags & FIXED_RATE) {
- if (cl->clk->flags & RATE_PROPAGATES)
- propagate_rate(cl->clk);
- } else {
- if (ops && ops->get_rate)
- ops->get_rate(cl->clk);
- }
-
- if (cl->clk->flags & NEEDS_SET_PARENT) {
- if (ops && ops->set_parent)
- ops->set_parent(cl->clk, cl->clk->parent);
- }
- }
- clkdev_add_table(onchip_clks, ARRAY_SIZE(onchip_clks));
- return 0;
-}
-
-arch_initcall(clk_init);
+++ /dev/null
-/*
- * Clock control driver for Freescale STMP37XX/STMP378X - internal header file
- *
- * Author: Vitaly Wool <vital@embeddedalley.com>
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#ifndef __ARCH_ARM_STMX3XXX_CLOCK_H__
-#define __ARCH_ARM_STMX3XXX_CLOCK_H__
-
-#ifndef __ASSEMBLER__
-
-struct clk_ops {
- int (*enable) (struct clk *);
- int (*disable) (struct clk *);
- long (*get_rate) (struct clk *);
- long (*round_rate) (struct clk *, u32);
- int (*set_rate) (struct clk *, u32);
- int (*set_parent) (struct clk *, struct clk *);
-};
-
-struct clk {
- struct clk *parent;
- u32 rate;
- u32 flags;
- u8 scale_shift;
- u8 enable_shift;
- u8 bypass_shift;
- u8 busy_bit;
- s8 usage;
- int enable_wait;
- int enable_negate;
- u32 saved_div;
- void __iomem *enable_reg;
- void __iomem *scale_reg;
- void __iomem *bypass_reg;
- void __iomem *busy_reg;
- struct clk_ops *ops;
-};
-
-#endif /* __ASSEMBLER__ */
-
-/* Flags */
-#define RATE_PROPAGATES (1<<0)
-#define NEEDS_INITIALIZATION (1<<1)
-#define PARENT_SET_RATE (1<<2)
-#define FIXED_RATE (1<<3)
-#define ENABLED (1<<4)
-#define NEEDS_SET_PARENT (1<<5)
-
-#endif
+++ /dev/null
-/*
- * Freescale STMP37XX/STMP378X core routines
- *
- * Embedded Alley Solutions, Inc <source@embeddedalley.com>
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <mach/stmp3xxx.h>
-#include <mach/platform.h>
-#include <mach/dma.h>
-#include <mach/regs-clkctrl.h>
-
-static int __stmp3xxx_reset_block(void __iomem *hwreg, int just_enable)
-{
- u32 c;
- int timeout;
-
- /* the process of software reset of IP block is done
- in several steps:
-
- - clear SFTRST and wait for block is enabled;
- - clear clock gating (CLKGATE bit);
- - set the SFTRST again and wait for block is in reset;
- - clear SFTRST and wait for reset completion.
- */
- c = __raw_readl(hwreg);
- c &= ~(1<<31); /* clear SFTRST */
- __raw_writel(c, hwreg);
- for (timeout = 1000000; timeout > 0; timeout--)
- /* still in SFTRST state ? */
- if ((__raw_readl(hwreg) & (1<<31)) == 0)
- break;
- if (timeout <= 0) {
- printk(KERN_ERR"%s(%p): timeout when enabling\n",
- __func__, hwreg);
- return -ETIME;
- }
-
- c = __raw_readl(hwreg);
- c &= ~(1<<30); /* clear CLKGATE */
- __raw_writel(c, hwreg);
-
- if (!just_enable) {
- c = __raw_readl(hwreg);
- c |= (1<<31); /* now again set SFTRST */
- __raw_writel(c, hwreg);
- for (timeout = 1000000; timeout > 0; timeout--)
- /* poll until CLKGATE set */
- if (__raw_readl(hwreg) & (1<<30))
- break;
- if (timeout <= 0) {
- printk(KERN_ERR"%s(%p): timeout when resetting\n",
- __func__, hwreg);
- return -ETIME;
- }
-
- c = __raw_readl(hwreg);
- c &= ~(1<<31); /* clear SFTRST */
- __raw_writel(c, hwreg);
- for (timeout = 1000000; timeout > 0; timeout--)
- /* still in SFTRST state ? */
- if ((__raw_readl(hwreg) & (1<<31)) == 0)
- break;
- if (timeout <= 0) {
- printk(KERN_ERR"%s(%p): timeout when enabling "
- "after reset\n", __func__, hwreg);
- return -ETIME;
- }
-
- c = __raw_readl(hwreg);
- c &= ~(1<<30); /* clear CLKGATE */
- __raw_writel(c, hwreg);
- }
- for (timeout = 1000000; timeout > 0; timeout--)
- /* still in SFTRST state ? */
- if ((__raw_readl(hwreg) & (1<<30)) == 0)
- break;
-
- if (timeout <= 0) {
- printk(KERN_ERR"%s(%p): timeout when unclockgating\n",
- __func__, hwreg);
- return -ETIME;
- }
-
- return 0;
-}
-
-int stmp3xxx_reset_block(void __iomem *hwreg, int just_enable)
-{
- int try = 10;
- int r;
-
- while (try--) {
- r = __stmp3xxx_reset_block(hwreg, just_enable);
- if (!r)
- break;
- pr_debug("%s: try %d failed\n", __func__, 10 - try);
- }
- return r;
-}
-EXPORT_SYMBOL(stmp3xxx_reset_block);
-
-struct platform_device stmp3xxx_dbguart = {
- .name = "stmp3xxx-dbguart",
- .id = -1,
-};
-
-void __init stmp3xxx_init(void)
-{
- /* Turn off auto-slow and other tricks */
- stmp3xxx_clearl(0x7f00000, REGS_CLKCTRL_BASE + HW_CLKCTRL_HBUS);
-
- stmp3xxx_dma_init();
-}
+++ /dev/null
-/*
-* Freescale STMP37XX/STMP378X platform devices
-*
-* Embedded Alley Solutions, Inc <source@embeddedalley.com>
-*
-* Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
-* Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
-*/
-
-/*
-* The code contained herein is licensed under the GNU General Public
-* License. You may obtain a copy of the GNU General Public License
-* Version 2 or later at the following locations:
-*
-* http://www.opensource.org/licenses/gpl-license.html
-* http://www.gnu.org/copyleft/gpl.html
-*/
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-
-#include <mach/dma.h>
-#include <mach/platform.h>
-#include <mach/stmp3xxx.h>
-#include <mach/regs-lcdif.h>
-#include <mach/regs-uartapp.h>
-#include <mach/regs-gpmi.h>
-#include <mach/regs-usbctrl.h>
-#include <mach/regs-ssp.h>
-#include <mach/regs-rtc.h>
-
-static u64 common_dmamask = DMA_BIT_MASK(32);
-
-static struct resource appuart_resources[] = {
- {
- .start = IRQ_UARTAPP_INTERNAL,
- .end = IRQ_UARTAPP_INTERNAL,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = IRQ_UARTAPP_RX_DMA,
- .end = IRQ_UARTAPP_RX_DMA,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = IRQ_UARTAPP_TX_DMA,
- .end = IRQ_UARTAPP_TX_DMA,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = REGS_UARTAPP1_PHYS,
- .end = REGS_UARTAPP1_PHYS + REGS_UARTAPP_SIZE,
- .flags = IORESOURCE_MEM,
- }, {
- /* Rx DMA channel */
- .start = STMP3XXX_DMA(6, STMP3XXX_BUS_APBX),
- .end = STMP3XXX_DMA(6, STMP3XXX_BUS_APBX),
- .flags = IORESOURCE_DMA,
- }, {
- /* Tx DMA channel */
- .start = STMP3XXX_DMA(7, STMP3XXX_BUS_APBX),
- .end = STMP3XXX_DMA(7, STMP3XXX_BUS_APBX),
- .flags = IORESOURCE_DMA,
- },
-};
-
-struct platform_device stmp3xxx_appuart = {
- .name = "stmp3xxx-appuart",
- .id = 0,
- .resource = appuart_resources,
- .num_resources = ARRAY_SIZE(appuart_resources),
- .dev = {
- .dma_mask = &common_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-struct platform_device stmp3xxx_watchdog = {
- .name = "stmp3xxx_wdt",
- .id = -1,
-};
-
-static struct resource ts_resource[] = {
- {
- .flags = IORESOURCE_IRQ,
- .start = IRQ_TOUCH_DETECT,
- .end = IRQ_TOUCH_DETECT,
- }, {
- .flags = IORESOURCE_IRQ,
- .start = IRQ_LRADC_CH5,
- .end = IRQ_LRADC_CH5,
- },
-};
-
-struct platform_device stmp3xxx_touchscreen = {
- .name = "stmp3xxx_ts",
- .id = -1,
- .resource = ts_resource,
- .num_resources = ARRAY_SIZE(ts_resource),
-};
-
-/*
-* Keypad device
-*/
-struct platform_device stmp3xxx_keyboard = {
- .name = "stmp3xxx-keyboard",
- .id = -1,
-};
-
-static struct resource gpmi_resources[] = {
- {
- .flags = IORESOURCE_MEM,
- .start = REGS_GPMI_PHYS,
- .end = REGS_GPMI_PHYS + REGS_GPMI_SIZE,
- }, {
- .flags = IORESOURCE_IRQ,
- .start = IRQ_GPMI_DMA,
- .end = IRQ_GPMI_DMA,
- }, {
- .flags = IORESOURCE_DMA,
- .start = STMP3XXX_DMA(4, STMP3XXX_BUS_APBH),
- .end = STMP3XXX_DMA(8, STMP3XXX_BUS_APBH),
- },
-};
-
-struct platform_device stmp3xxx_gpmi = {
- .name = "gpmi",
- .id = -1,
- .dev = {
- .dma_mask = &common_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = gpmi_resources,
- .num_resources = ARRAY_SIZE(gpmi_resources),
-};
-
-static struct resource mmc1_resource[] = {
- {
- .flags = IORESOURCE_MEM,
- .start = REGS_SSP1_PHYS,
- .end = REGS_SSP1_PHYS + REGS_SSP_SIZE,
- }, {
- .flags = IORESOURCE_DMA,
- .start = STMP3XXX_DMA(1, STMP3XXX_BUS_APBH),
- .end = STMP3XXX_DMA(1, STMP3XXX_BUS_APBH),
- }, {
- .flags = IORESOURCE_IRQ,
- .start = IRQ_SSP1_DMA,
- .end = IRQ_SSP1_DMA,
- }, {
- .flags = IORESOURCE_IRQ,
- .start = IRQ_SSP_ERROR,
- .end = IRQ_SSP_ERROR,
- },
-};
-
-struct platform_device stmp3xxx_mmc = {
- .name = "stmp3xxx-mmc",
- .id = 1,
- .dev = {
- .dma_mask = &common_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = mmc1_resource,
- .num_resources = ARRAY_SIZE(mmc1_resource),
-};
-
-static struct resource usb_resources[] = {
- {
- .start = REGS_USBCTRL_PHYS,
- .end = REGS_USBCTRL_PHYS + SZ_4K,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IRQ_USB_CTRL,
- .end = IRQ_USB_CTRL,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device stmp3xxx_udc = {
- .name = "fsl-usb2-udc",
- .id = -1,
- .dev = {
- .dma_mask = &common_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = usb_resources,
- .num_resources = ARRAY_SIZE(usb_resources),
-};
-
-struct platform_device stmp3xxx_ehci = {
- .name = "fsl-ehci",
- .id = -1,
- .dev = {
- .dma_mask = &common_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = usb_resources,
- .num_resources = ARRAY_SIZE(usb_resources),
-};
-
-static struct resource rtc_resources[] = {
- {
- .start = REGS_RTC_PHYS,
- .end = REGS_RTC_PHYS + REGS_RTC_SIZE,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IRQ_RTC_ALARM,
- .end = IRQ_RTC_ALARM,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = IRQ_RTC_1MSEC,
- .end = IRQ_RTC_1MSEC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device stmp3xxx_rtc = {
- .name = "stmp3xxx-rtc",
- .id = -1,
- .resource = rtc_resources,
- .num_resources = ARRAY_SIZE(rtc_resources),
-};
-
-static struct resource ssp1_resources[] = {
- {
- .start = REGS_SSP1_PHYS,
- .end = REGS_SSP1_PHYS + REGS_SSP_SIZE,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IRQ_SSP1_DMA,
- .end = IRQ_SSP1_DMA,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = STMP3XXX_DMA(1, STMP3XXX_BUS_APBH),
- .end = STMP3XXX_DMA(1, STMP3XXX_BUS_APBH),
- .flags = IORESOURCE_DMA,
- },
-};
-
-static struct resource ssp2_resources[] = {
- {
- .start = REGS_SSP2_PHYS,
- .end = REGS_SSP2_PHYS + REGS_SSP_SIZE,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IRQ_SSP2_DMA,
- .end = IRQ_SSP2_DMA,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = STMP3XXX_DMA(2, STMP3XXX_BUS_APBH),
- .end = STMP3XXX_DMA(2, STMP3XXX_BUS_APBH),
- .flags = IORESOURCE_DMA,
- },
-};
-
-struct platform_device stmp3xxx_spi1 = {
- .name = "stmp3xxx_ssp",
- .id = 1,
- .dev = {
- .dma_mask = &common_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = ssp1_resources,
- .num_resources = ARRAY_SIZE(ssp1_resources),
-};
-
-struct platform_device stmp3xxx_spi2 = {
- .name = "stmp3xxx_ssp",
- .id = 2,
- .dev = {
- .dma_mask = &common_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = ssp2_resources,
- .num_resources = ARRAY_SIZE(ssp2_resources),
-};
-
-static struct resource fb_resource[] = {
- {
- .flags = IORESOURCE_IRQ,
- .start = IRQ_LCDIF_DMA,
- .end = IRQ_LCDIF_DMA,
- }, {
- .flags = IORESOURCE_IRQ,
- .start = IRQ_LCDIF_ERROR,
- .end = IRQ_LCDIF_ERROR,
- }, {
- .flags = IORESOURCE_MEM,
- .start = REGS_LCDIF_PHYS,
- .end = REGS_LCDIF_PHYS + REGS_LCDIF_SIZE,
- },
-};
-
-struct platform_device stmp3xxx_framebuffer = {
- .name = "stmp3xxx-fb",
- .id = -1,
- .dev = {
- .dma_mask = &common_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .num_resources = ARRAY_SIZE(fb_resource),
- .resource = fb_resource,
-};
-
-#define CMDLINE_DEVICE_CHOOSE(name, dev1, dev2) \
- static char *cmdline_device_##name; \
- static int cmdline_device_##name##_setup(char *dev) \
- { \
- cmdline_device_##name = dev + 1; \
- return 0; \
- } \
- __setup(#name, cmdline_device_##name##_setup); \
- int stmp3xxx_##name##_device_register(void) \
- { \
- struct platform_device *d = NULL; \
- if (!cmdline_device_##name || \
- !strcmp(cmdline_device_##name, #dev1)) \
- d = &stmp3xxx_##dev1; \
- else if (!strcmp(cmdline_device_##name, #dev2)) \
- d = &stmp3xxx_##dev2; \
- else \
- printk(KERN_ERR"Unknown %s assignment '%s'.\n", \
- #name, cmdline_device_##name); \
- return d ? platform_device_register(d) : -ENOENT; \
- }
-
-CMDLINE_DEVICE_CHOOSE(ssp1, mmc, spi1)
-CMDLINE_DEVICE_CHOOSE(ssp2, gpmi, spi2)
-
-struct platform_device stmp3xxx_backlight = {
- .name = "stmp3xxx-bl",
- .id = -1,
-};
-
-struct platform_device stmp3xxx_rotdec = {
- .name = "stmp3xxx-rotdec",
- .id = -1,
-};
-
-struct platform_device stmp3xxx_persistent = {
- .name = "stmp3xxx-persistent",
- .id = -1,
-};
-
-struct platform_device stmp3xxx_dcp_bootstream = {
- .name = "stmp3xxx-dcpboot",
- .id = -1,
- .dev = {
- .dma_mask = &common_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-static struct resource dcp_resources[] = {
- {
- .start = IRQ_DCP_VMI,
- .end = IRQ_DCP_VMI,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = IRQ_DCP,
- .end = IRQ_DCP,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device stmp3xxx_dcp = {
- .name = "stmp3xxx-dcp",
- .id = -1,
- .resource = dcp_resources,
- .num_resources = ARRAY_SIZE(dcp_resources),
- .dev = {
- .dma_mask = &common_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-static struct resource battery_resource[] = {
- {
- .flags = IORESOURCE_IRQ,
- .start = IRQ_VDD5V,
- .end = IRQ_VDD5V,
- },
-};
-
-struct platform_device stmp3xxx_battery = {
- .name = "stmp3xxx-battery",
- .resource = battery_resource,
- .num_resources = ARRAY_SIZE(battery_resource),
-};
+++ /dev/null
-/*
- * DMA helper routines for Freescale STMP37XX/STMP378X
- *
- * Author: dmitry pervushin <dpervushin@embeddedalley.com>
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#include <linux/gfp.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/dmapool.h>
-#include <linux/sysdev.h>
-#include <linux/cpufreq.h>
-
-#include <asm/page.h>
-
-#include <mach/platform.h>
-#include <mach/dma.h>
-#include <mach/regs-apbx.h>
-#include <mach/regs-apbh.h>
-
-static const size_t pool_item_size = sizeof(struct stmp3xxx_dma_command);
-static const size_t pool_alignment = 8;
-static struct stmp3xxx_dma_user {
- void *pool;
- int inuse;
- const char *name;
-} channels[MAX_DMA_CHANNELS];
-
-#define IS_VALID_CHANNEL(ch) ((ch) >= 0 && (ch) < MAX_DMA_CHANNELS)
-#define IS_USED(ch) (channels[ch].inuse)
-
-int stmp3xxx_dma_request(int ch, struct device *dev, const char *name)
-{
- struct stmp3xxx_dma_user *user;
- int err = 0;
-
- user = channels + ch;
- if (!IS_VALID_CHANNEL(ch)) {
- err = -ENODEV;
- goto out;
- }
- if (IS_USED(ch)) {
- err = -EBUSY;
- goto out;
- }
- /* Create a pool to allocate dma commands from */
- user->pool = dma_pool_create(name, dev, pool_item_size,
- pool_alignment, PAGE_SIZE);
- if (user->pool == NULL) {
- err = -ENOMEM;
- goto out;
- }
- user->name = name;
- user->inuse++;
-out:
- return err;
-}
-EXPORT_SYMBOL(stmp3xxx_dma_request);
-
-int stmp3xxx_dma_release(int ch)
-{
- struct stmp3xxx_dma_user *user = channels + ch;
- int err = 0;
-
- if (!IS_VALID_CHANNEL(ch)) {
- err = -ENODEV;
- goto out;
- }
- if (!IS_USED(ch)) {
- err = -EBUSY;
- goto out;
- }
- BUG_ON(user->pool == NULL);
- dma_pool_destroy(user->pool);
- user->inuse--;
-out:
- return err;
-}
-EXPORT_SYMBOL(stmp3xxx_dma_release);
-
-int stmp3xxx_dma_read_semaphore(int channel)
-{
- int sem = -1;
-
- switch (STMP3XXX_DMA_BUS(channel)) {
- case STMP3XXX_BUS_APBH:
- sem = __raw_readl(REGS_APBH_BASE + HW_APBH_CHn_SEMA +
- STMP3XXX_DMA_CHANNEL(channel) * 0x70);
- sem &= BM_APBH_CHn_SEMA_PHORE;
- sem >>= BP_APBH_CHn_SEMA_PHORE;
- break;
-
- case STMP3XXX_BUS_APBX:
- sem = __raw_readl(REGS_APBX_BASE + HW_APBX_CHn_SEMA +
- STMP3XXX_DMA_CHANNEL(channel) * 0x70);
- sem &= BM_APBX_CHn_SEMA_PHORE;
- sem >>= BP_APBX_CHn_SEMA_PHORE;
- break;
- default:
- BUG();
- }
- return sem;
-}
-EXPORT_SYMBOL(stmp3xxx_dma_read_semaphore);
-
-int stmp3xxx_dma_allocate_command(int channel,
- struct stmp3xxx_dma_descriptor *descriptor)
-{
- struct stmp3xxx_dma_user *user = channels + channel;
- int err = 0;
-
- if (!IS_VALID_CHANNEL(channel)) {
- err = -ENODEV;
- goto out;
- }
- if (!IS_USED(channel)) {
- err = -EBUSY;
- goto out;
- }
- if (descriptor == NULL) {
- err = -EINVAL;
- goto out;
- }
-
- /* Allocate memory for a command from the buffer */
- descriptor->command =
- dma_pool_alloc(user->pool, GFP_KERNEL, &descriptor->handle);
-
- /* Check it worked */
- if (!descriptor->command) {
- err = -ENOMEM;
- goto out;
- }
-
- memset(descriptor->command, 0, pool_item_size);
-out:
- WARN_ON(err);
- return err;
-}
-EXPORT_SYMBOL(stmp3xxx_dma_allocate_command);
-
-int stmp3xxx_dma_free_command(int channel,
- struct stmp3xxx_dma_descriptor *descriptor)
-{
- int err = 0;
-
- if (!IS_VALID_CHANNEL(channel)) {
- err = -ENODEV;
- goto out;
- }
- if (!IS_USED(channel)) {
- err = -EBUSY;
- goto out;
- }
-
- /* Return the command memory to the pool */
- dma_pool_free(channels[channel].pool, descriptor->command,
- descriptor->handle);
-
- /* Initialise descriptor so we're not tempted to use it */
- descriptor->command = NULL;
- descriptor->handle = 0;
- descriptor->virtual_buf_ptr = NULL;
- descriptor->next_descr = NULL;
-
- WARN_ON(err);
-out:
- return err;
-}
-EXPORT_SYMBOL(stmp3xxx_dma_free_command);
-
-void stmp3xxx_dma_go(int channel,
- struct stmp3xxx_dma_descriptor *head, u32 semaphore)
-{
- int ch = STMP3XXX_DMA_CHANNEL(channel);
- void __iomem *c, *s;
-
- switch (STMP3XXX_DMA_BUS(channel)) {
- case STMP3XXX_BUS_APBH:
- c = REGS_APBH_BASE + HW_APBH_CHn_NXTCMDAR + 0x70 * ch;
- s = REGS_APBH_BASE + HW_APBH_CHn_SEMA + 0x70 * ch;
- break;
-
- case STMP3XXX_BUS_APBX:
- c = REGS_APBX_BASE + HW_APBX_CHn_NXTCMDAR + 0x70 * ch;
- s = REGS_APBX_BASE + HW_APBX_CHn_SEMA + 0x70 * ch;
- break;
-
- default:
- return;
- }
-
- /* Set next command */
- __raw_writel(head->handle, c);
- /* Set counting semaphore (kicks off transfer). Assumes
- peripheral has been set up correctly */
- __raw_writel(semaphore, s);
-}
-EXPORT_SYMBOL(stmp3xxx_dma_go);
-
-int stmp3xxx_dma_running(int channel)
-{
- switch (STMP3XXX_DMA_BUS(channel)) {
- case STMP3XXX_BUS_APBH:
- return (__raw_readl(REGS_APBH_BASE + HW_APBH_CHn_SEMA +
- 0x70 * STMP3XXX_DMA_CHANNEL(channel))) &
- BM_APBH_CHn_SEMA_PHORE;
-
- case STMP3XXX_BUS_APBX:
- return (__raw_readl(REGS_APBX_BASE + HW_APBX_CHn_SEMA +
- 0x70 * STMP3XXX_DMA_CHANNEL(channel))) &
- BM_APBX_CHn_SEMA_PHORE;
- default:
- BUG();
- return 0;
- }
-}
-EXPORT_SYMBOL(stmp3xxx_dma_running);
-
-/*
- * Circular dma chain management
- */
-void stmp3xxx_dma_free_chain(struct stmp37xx_circ_dma_chain *chain)
-{
- int i;
-
- for (i = 0; i < chain->total_count; i++)
- stmp3xxx_dma_free_command(
- STMP3XXX_DMA(chain->channel, chain->bus),
- &chain->chain[i]);
-}
-EXPORT_SYMBOL(stmp3xxx_dma_free_chain);
-
-int stmp3xxx_dma_make_chain(int ch, struct stmp37xx_circ_dma_chain *chain,
- struct stmp3xxx_dma_descriptor descriptors[],
- unsigned items)
-{
- int i;
- int err = 0;
-
- if (items == 0)
- return err;
-
- for (i = 0; i < items; i++) {
- err = stmp3xxx_dma_allocate_command(ch, &descriptors[i]);
- if (err) {
- WARN_ON(err);
- /*
- * Couldn't allocate the whole chain.
- * deallocate what has been allocated
- */
- if (i) {
- do {
- stmp3xxx_dma_free_command(ch,
- &descriptors
- [i]);
- } while (i-- > 0);
- }
- return err;
- }
-
- /* link them! */
- if (i > 0) {
- descriptors[i - 1].next_descr = &descriptors[i];
- descriptors[i - 1].command->next =
- descriptors[i].handle;
- }
- }
-
- /* make list circular */
- descriptors[items - 1].next_descr = &descriptors[0];
- descriptors[items - 1].command->next = descriptors[0].handle;
-
- chain->total_count = items;
- chain->chain = descriptors;
- chain->free_index = 0;
- chain->active_index = 0;
- chain->cooked_index = 0;
- chain->free_count = items;
- chain->active_count = 0;
- chain->cooked_count = 0;
- chain->bus = STMP3XXX_DMA_BUS(ch);
- chain->channel = STMP3XXX_DMA_CHANNEL(ch);
- return err;
-}
-EXPORT_SYMBOL(stmp3xxx_dma_make_chain);
-
-void stmp37xx_circ_clear_chain(struct stmp37xx_circ_dma_chain *chain)
-{
- BUG_ON(stmp3xxx_dma_running(STMP3XXX_DMA(chain->channel, chain->bus)));
- chain->free_index = 0;
- chain->active_index = 0;
- chain->cooked_index = 0;
- chain->free_count = chain->total_count;
- chain->active_count = 0;
- chain->cooked_count = 0;
-}
-EXPORT_SYMBOL(stmp37xx_circ_clear_chain);
-
-void stmp37xx_circ_advance_free(struct stmp37xx_circ_dma_chain *chain,
- unsigned count)
-{
- BUG_ON(chain->cooked_count < count);
-
- chain->cooked_count -= count;
- chain->cooked_index += count;
- chain->cooked_index %= chain->total_count;
- chain->free_count += count;
-}
-EXPORT_SYMBOL(stmp37xx_circ_advance_free);
-
-void stmp37xx_circ_advance_active(struct stmp37xx_circ_dma_chain *chain,
- unsigned count)
-{
- void __iomem *c;
- u32 mask_clr, mask;
- BUG_ON(chain->free_count < count);
-
- chain->free_count -= count;
- chain->free_index += count;
- chain->free_index %= chain->total_count;
- chain->active_count += count;
-
- switch (chain->bus) {
- case STMP3XXX_BUS_APBH:
- c = REGS_APBH_BASE + HW_APBH_CHn_SEMA + 0x70 * chain->channel;
- mask_clr = BM_APBH_CHn_SEMA_INCREMENT_SEMA;
- mask = BF(count, APBH_CHn_SEMA_INCREMENT_SEMA);
- break;
- case STMP3XXX_BUS_APBX:
- c = REGS_APBX_BASE + HW_APBX_CHn_SEMA + 0x70 * chain->channel;
- mask_clr = BM_APBX_CHn_SEMA_INCREMENT_SEMA;
- mask = BF(count, APBX_CHn_SEMA_INCREMENT_SEMA);
- break;
- default:
- BUG();
- return;
- }
-
- /* Set counting semaphore (kicks off transfer). Assumes
- peripheral has been set up correctly */
- stmp3xxx_clearl(mask_clr, c);
- stmp3xxx_setl(mask, c);
-}
-EXPORT_SYMBOL(stmp37xx_circ_advance_active);
-
-unsigned stmp37xx_circ_advance_cooked(struct stmp37xx_circ_dma_chain *chain)
-{
- unsigned cooked;
-
- cooked = chain->active_count -
- stmp3xxx_dma_read_semaphore(STMP3XXX_DMA(chain->channel, chain->bus));
-
- chain->active_count -= cooked;
- chain->active_index += cooked;
- chain->active_index %= chain->total_count;
-
- chain->cooked_count += cooked;
-
- return cooked;
-}
-EXPORT_SYMBOL(stmp37xx_circ_advance_cooked);
-
-void stmp3xxx_dma_set_alt_target(int channel, int function)
-{
-#if defined(CONFIG_ARCH_STMP37XX)
- unsigned bits = 4;
-#elif defined(CONFIG_ARCH_STMP378X)
- unsigned bits = 2;
-#else
-#error wrong arch
-#endif
- int shift = STMP3XXX_DMA_CHANNEL(channel) * bits;
- unsigned mask = (1<<bits) - 1;
- void __iomem *c;
-
- BUG_ON(function < 0 || function >= (1<<bits));
- pr_debug("%s: channel = %d, using mask %x, "
- "shift = %d\n", __func__, channel, mask, shift);
-
- switch (STMP3XXX_DMA_BUS(channel)) {
- case STMP3XXX_BUS_APBH:
- c = REGS_APBH_BASE + HW_APBH_DEVSEL;
- break;
- case STMP3XXX_BUS_APBX:
- c = REGS_APBX_BASE + HW_APBX_DEVSEL;
- break;
- default:
- BUG();
- }
- stmp3xxx_clearl(mask << shift, c);
- stmp3xxx_setl(mask << shift, c);
-}
-EXPORT_SYMBOL(stmp3xxx_dma_set_alt_target);
-
-void stmp3xxx_dma_suspend(void)
-{
- stmp3xxx_setl(BM_APBH_CTRL0_CLKGATE, REGS_APBH_BASE + HW_APBH_CTRL0);
- stmp3xxx_setl(BM_APBX_CTRL0_CLKGATE, REGS_APBX_BASE + HW_APBX_CTRL0);
-}
-
-void stmp3xxx_dma_resume(void)
-{
- stmp3xxx_clearl(BM_APBH_CTRL0_CLKGATE | BM_APBH_CTRL0_SFTRST,
- REGS_APBH_BASE + HW_APBH_CTRL0);
- stmp3xxx_clearl(BM_APBX_CTRL0_CLKGATE | BM_APBX_CTRL0_SFTRST,
- REGS_APBX_BASE + HW_APBX_CTRL0);
-}
-
-#ifdef CONFIG_CPU_FREQ
-
-struct dma_notifier_block {
- struct notifier_block nb;
- void *data;
-};
-
-static int dma_cpufreq_notifier(struct notifier_block *self,
- unsigned long phase, void *p)
-{
- switch (phase) {
- case CPUFREQ_POSTCHANGE:
- stmp3xxx_dma_resume();
- break;
-
- case CPUFREQ_PRECHANGE:
- stmp3xxx_dma_suspend();
- break;
-
- default:
- break;
- }
-
- return NOTIFY_DONE;
-}
-
-static struct dma_notifier_block dma_cpufreq_nb = {
- .nb = {
- .notifier_call = dma_cpufreq_notifier,
- },
-};
-#endif /* CONFIG_CPU_FREQ */
-
-void __init stmp3xxx_dma_init(void)
-{
- stmp3xxx_clearl(BM_APBH_CTRL0_CLKGATE | BM_APBH_CTRL0_SFTRST,
- REGS_APBH_BASE + HW_APBH_CTRL0);
- stmp3xxx_clearl(BM_APBX_CTRL0_CLKGATE | BM_APBX_CTRL0_SFTRST,
- REGS_APBX_BASE + HW_APBX_CTRL0);
-#ifdef CONFIG_CPU_FREQ
- cpufreq_register_notifier(&dma_cpufreq_nb.nb,
- CPUFREQ_TRANSITION_NOTIFIER);
-#endif /* CONFIG_CPU_FREQ */
-}
+++ /dev/null
-/*
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#ifndef __ASM_MACH_CLKDEV_H
-#define __ASM_MACH_CLKDEV_H
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do { } while (0)
-
-#endif
+++ /dev/null
-/*
- * Freescale STMP37XX/STMP378X CPU type detection
- *
- * Embedded Alley Solutions, Inc <source@embeddedalley.com>
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#ifndef __ASM_PLAT_CPU_H
-#define __ASM_PLAT_CPU_H
-
-#ifdef CONFIG_ARCH_STMP37XX
-#define cpu_is_stmp37xx() (1)
-#else
-#define cpu_is_stmp37xx() (0)
-#endif
-
-#ifdef CONFIG_ARCH_STMP378X
-#define cpu_is_stmp378x() (1)
-#else
-#define cpu_is_stmp378x() (0)
-#endif
-
-#endif /* __ASM_PLAT_CPU_H */
+++ /dev/null
-/*
- * Debugging macro include header
- *
- * Embedded Alley Solutions, Inc <source@embeddedalley.com>
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
- .macro addruart, rp, rv
- mov \rp, #0x00070000
- add \rv, \rp, #0xf0000000 @ virtual base
- add \rp, \rp, #0x80000000 @ physical base
- .endm
-
- .macro senduart,rd,rx
- strb \rd, [\rx, #0] @ data register at 0
- .endm
-
- .macro waituart,rd,rx
-1001: ldr \rd, [\rx, #0x18] @ UARTFLG
- tst \rd, #1 << 5 @ UARTFLGUTXFF - 1 when full
- bne 1001b
- .endm
-
- .macro busyuart,rd,rx
-1001: ldr \rd, [\rx, #0x18] @ UARTFLG
- tst \rd, #1 << 3 @ UARTFLGUBUSY - 1 when busy
- bne 1001b
- .endm
+++ /dev/null
-/*
- * Freescale STMP37XX/STMP378X DMA helper interface
- *
- * Embedded Alley Solutions, Inc <source@embeddedalley.com>
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#ifndef __ASM_PLAT_STMP3XXX_DMA_H
-#define __ASM_PLAT_STMP3XXX_DMA_H
-
-#include <linux/platform_device.h>
-#include <linux/dmapool.h>
-
-#if !defined(MAX_PIO_WORDS)
-#define MAX_PIO_WORDS (15)
-#endif
-
-#define STMP3XXX_BUS_APBH 0
-#define STMP3XXX_BUS_APBX 1
-#define STMP3XXX_DMA_MAX_CHANNEL 16
-#define STMP3XXX_DMA_BUS(dma) ((dma) / 16)
-#define STMP3XXX_DMA_CHANNEL(dma) ((dma) % 16)
-#define STMP3XXX_DMA(channel, bus) ((bus) * 16 + (channel))
-#define MAX_DMA_ADDRESS 0xffffffff
-#define MAX_DMA_CHANNELS 32
-
-struct stmp3xxx_dma_command {
- u32 next;
- u32 cmd;
- union {
- u32 buf_ptr;
- u32 alternate;
- };
- u32 pio_words[MAX_PIO_WORDS];
-};
-
-struct stmp3xxx_dma_descriptor {
- struct stmp3xxx_dma_command *command;
- dma_addr_t handle;
-
- /* The virtual address of the buffer pointer */
- void *virtual_buf_ptr;
- /* The next descriptor in a the DMA chain (optional) */
- struct stmp3xxx_dma_descriptor *next_descr;
-};
-
-struct stmp37xx_circ_dma_chain {
- unsigned total_count;
- struct stmp3xxx_dma_descriptor *chain;
-
- unsigned free_index;
- unsigned free_count;
- unsigned active_index;
- unsigned active_count;
- unsigned cooked_index;
- unsigned cooked_count;
-
- int bus;
- unsigned channel;
-};
-
-static inline struct stmp3xxx_dma_descriptor
- *stmp3xxx_dma_circ_get_free_head(struct stmp37xx_circ_dma_chain *chain)
-{
- return &(chain->chain[chain->free_index]);
-}
-
-static inline struct stmp3xxx_dma_descriptor
- *stmp3xxx_dma_circ_get_cooked_head(struct stmp37xx_circ_dma_chain *chain)
-{
- return &(chain->chain[chain->cooked_index]);
-}
-
-int stmp3xxx_dma_request(int ch, struct device *dev, const char *name);
-int stmp3xxx_dma_release(int ch);
-int stmp3xxx_dma_allocate_command(int ch,
- struct stmp3xxx_dma_descriptor *descriptor);
-int stmp3xxx_dma_free_command(int ch,
- struct stmp3xxx_dma_descriptor *descriptor);
-void stmp3xxx_dma_continue(int channel, u32 semaphore);
-void stmp3xxx_dma_go(int ch, struct stmp3xxx_dma_descriptor *head,
- u32 semaphore);
-int stmp3xxx_dma_running(int ch);
-int stmp3xxx_dma_make_chain(int ch, struct stmp37xx_circ_dma_chain *chain,
- struct stmp3xxx_dma_descriptor descriptors[],
- unsigned items);
-void stmp3xxx_dma_free_chain(struct stmp37xx_circ_dma_chain *chain);
-void stmp37xx_circ_clear_chain(struct stmp37xx_circ_dma_chain *chain);
-void stmp37xx_circ_advance_free(struct stmp37xx_circ_dma_chain *chain,
- unsigned count);
-void stmp37xx_circ_advance_active(struct stmp37xx_circ_dma_chain *chain,
- unsigned count);
-unsigned stmp37xx_circ_advance_cooked(struct stmp37xx_circ_dma_chain *chain);
-int stmp3xxx_dma_read_semaphore(int ch);
-void stmp3xxx_dma_init(void);
-void stmp3xxx_dma_set_alt_target(int ch, int target);
-void stmp3xxx_dma_suspend(void);
-void stmp3xxx_dma_resume(void);
-
-/*
- * STMP37xx and STMP378x have different DMA control
- * registers layout
- */
-
-void stmp3xxx_arch_dma_freeze(int ch);
-void stmp3xxx_arch_dma_unfreeze(int ch);
-void stmp3xxx_arch_dma_reset_channel(int ch);
-void stmp3xxx_arch_dma_enable_interrupt(int ch);
-void stmp3xxx_arch_dma_clear_interrupt(int ch);
-int stmp3xxx_arch_dma_is_interrupt(int ch);
-
-static inline void stmp3xxx_dma_reset_channel(int ch)
-{
- stmp3xxx_arch_dma_reset_channel(ch);
-}
-
-
-static inline void stmp3xxx_dma_freeze(int ch)
-{
- stmp3xxx_arch_dma_freeze(ch);
-}
-
-static inline void stmp3xxx_dma_unfreeze(int ch)
-{
- stmp3xxx_arch_dma_unfreeze(ch);
-}
-
-static inline void stmp3xxx_dma_enable_interrupt(int ch)
-{
- stmp3xxx_arch_dma_enable_interrupt(ch);
-}
-
-static inline void stmp3xxx_dma_clear_interrupt(int ch)
-{
- stmp3xxx_arch_dma_clear_interrupt(ch);
-}
-
-static inline int stmp3xxx_dma_is_interrupt(int ch)
-{
- return stmp3xxx_arch_dma_is_interrupt(ch);
-}
-
-#endif /* __ASM_PLAT_STMP3XXX_DMA_H */
+++ /dev/null
-/*
- * Freescale STMP37XX/STMP378X GPIO interface
- *
- * Embedded Alley Solutions, Inc <source@embeddedalley.com>
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#ifndef __ASM_PLAT_GPIO_H
-#define __ASM_PLAT_GPIO_H
-
-#define ARCH_NR_GPIOS (32 * 3)
-#define gpio_to_irq(gpio) __gpio_to_irq(gpio)
-#define gpio_get_value(gpio) __gpio_get_value(gpio)
-#define gpio_set_value(gpio, value) __gpio_set_value(gpio, value)
-
-#include <asm-generic/gpio.h>
-
-#endif /* __ASM_PLAT_GPIO_H */
+++ /dev/null
-#ifndef __MACH_GPMI_H
-
-#include <linux/mtd/partitions.h>
-#include <mach/regs-gpmi.h>
-
-struct gpmi_platform_data {
- void *pins;
- int nr_parts;
- struct mtd_partition *parts;
- const char *part_types[];
-};
-#endif
+++ /dev/null
-/*
- * This file contains the hardware definitions of the Freescale STMP3XXX
- *
- * Copyright (C) 2005 Sigmatel Inc
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-/*
- * Where in virtual memory the IO devices (timers, system controllers
- * and so on)
- */
-#define IO_BASE 0xF0000000 /* VA of IO */
-#define IO_SIZE 0x00100000 /* How much? */
-#define IO_START 0x80000000 /* PA of IO */
-
-/* macro to get at IO space when running virtually */
-#define IO_ADDRESS(x) (((x) & 0x000fffff) | IO_BASE)
-
-#endif
+++ /dev/null
-/*
- * Copyright (C) 2005 Sigmatel Inc
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-#define __io(a) __typesafe_io(a)
-#define __mem_pci(a) (a)
-#define __mem_isa(a) (a)
-
-#endif
+++ /dev/null
-/*
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET UL(0x40000000)
-
-#endif
+++ /dev/null
-#ifndef _MACH_MMC_H
-#define _MACH_MMC_H
-
-#include <mach/regs-ssp.h>
-
-struct stmp3xxxmmc_platform_data {
- int (*get_wp)(void);
- unsigned long (*setclock)(void __iomem *base, unsigned long);
- void (*cmd_pullup)(int);
- int (*hw_init)(void);
- void (*hw_release)(void);
-};
-
-#endif
+++ /dev/null
-/*
- * Freescale STMP37XX/STMP378X Pin Multiplexing
- *
- * Author: Vladislav Buzov <vbuzov@embeddedalley.com>
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#ifndef __PINMUX_H
-#define __PINMUX_H
-
-#include <linux/spinlock.h>
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <asm-generic/gpio.h>
-
-/* Pin definitions */
-#include "pins.h"
-#include <mach/pins.h>
-
-/*
- * Each pin may be routed up to four different HW interfaces
- * including GPIO
- */
-enum pin_fun {
- PIN_FUN1 = 0,
- PIN_FUN2,
- PIN_FUN3,
- PIN_GPIO,
-};
-
-/*
- * Each pin may have different output drive strength in range from
- * 4mA to 20mA. The most common case is 4, 8 and 12 mA strengths.
- */
-enum pin_strength {
- PIN_4MA = 0,
- PIN_8MA,
- PIN_12MA,
- PIN_16MA,
- PIN_20MA,
-};
-
-/*
- * Each pin can be programmed for 1.8V or 3.3V
- */
-enum pin_voltage {
- PIN_1_8V = 0,
- PIN_3_3V,
-};
-
-/*
- * Structure to define a group of pins and their parameters
- */
-struct pin_desc {
- unsigned id;
- enum pin_fun fun;
- enum pin_strength strength;
- enum pin_voltage voltage;
- unsigned pullup:1;
-};
-
-struct pin_group {
- struct pin_desc *pins;
- int nr_pins;
-};
-
-/* Set pin drive strength */
-void stmp3xxx_pin_strength(unsigned id, enum pin_strength strength,
- const char *label);
-
-/* Set pin voltage */
-void stmp3xxx_pin_voltage(unsigned id, enum pin_voltage voltage,
- const char *label);
-
-/* Enable pull-up resistor for a pin */
-void stmp3xxx_pin_pullup(unsigned id, int enable, const char *label);
-
-/*
- * Request a pin ownership, only one module (identified by @label)
- * may own a pin.
- */
-int stmp3xxx_request_pin(unsigned id, enum pin_fun fun, const char *label);
-
-/* Release pin */
-void stmp3xxx_release_pin(unsigned id, const char *label);
-
-void stmp3xxx_set_pin_type(unsigned id, enum pin_fun fun);
-
-/*
- * Each bank is associated with a number of registers to control
- * pin function, drive strength, voltage and pull-up reigster. The
- * number of registers of a given type depends on the number of bits
- * describin particular pin.
- */
-#define HW_MUXSEL_NUM 2 /* registers per bank */
-#define HW_MUXSEL_PIN_LEN 2 /* bits per pin */
-#define HW_MUXSEL_PIN_NUM 16 /* pins per register */
-#define HW_MUXSEL_PINFUN_MASK 0x3 /* pin function mask */
-#define HW_MUXSEL_PINFUN_NUM 4 /* four options for a pin */
-
-#define HW_DRIVE_NUM 4 /* registers per bank */
-#define HW_DRIVE_PIN_LEN 4 /* bits per pin */
-#define HW_DRIVE_PIN_NUM 8 /* pins per register */
-#define HW_DRIVE_PINDRV_MASK 0x3 /* pin strength mask - 2 bits */
-#define HW_DRIVE_PINDRV_NUM 5 /* five possible strength values */
-#define HW_DRIVE_PINV_MASK 0x4 /* pin voltage mask - 1 bit */
-
-
-struct stmp3xxx_pinmux_bank {
- struct gpio_chip chip;
-
- /* Pins allocation map */
- unsigned long pin_map;
-
- /* Pin owner names */
- const char *pin_labels[32];
-
- /* Bank registers */
- void __iomem *hw_muxsel[HW_MUXSEL_NUM];
- void __iomem *hw_drive[HW_DRIVE_NUM];
- void __iomem *hw_pull;
-
- void __iomem *pin2irq,
- *irqlevel,
- *irqpolarity,
- *irqen,
- *irqstat;
-
- /* HW MUXSEL register function bit values */
- u8 functions[HW_MUXSEL_PINFUN_NUM];
-
- /*
- * HW DRIVE register strength bit values:
- * 0xff - requested strength is not supported for this bank
- */
- u8 strengths[HW_DRIVE_PINDRV_NUM];
-
- /* GPIO things */
- void __iomem *hw_gpio_in,
- *hw_gpio_out,
- *hw_gpio_doe;
- int irq, virq;
-};
-
-int __init stmp3xxx_pinmux_init(int virtual_irq_start);
-
-#endif /* __PINMUX_H */
+++ /dev/null
-/*
- * Freescale STMP37XX/STMP378X Pin multiplexing interface definitions
- *
- * Author: Vladislav Buzov <vbuzov@embeddedalley.com>
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#ifndef __ASM_PLAT_PINS_H
-#define __ASM_PLAT_PINS_H
-
-#define STMP3XXX_PINID(bank, pin) (bank * 32 + pin)
-#define STMP3XXX_PINID_TO_BANK(pinid) (pinid / 32)
-#define STMP3XXX_PINID_TO_PINNUM(pinid) (pinid % 32)
-
-/*
- * Special invalid pin identificator to show a pin doesn't exist
- */
-#define PINID_NO_PIN STMP3XXX_PINID(0xFF, 0xFF)
-
-#endif /* __ASM_PLAT_PINS_H */
+++ /dev/null
-/*
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#ifndef __ASM_PLAT_PLATFORM_H
-#define __ASM_PLAT_PLATFORM_H
-
-#ifndef __ASSEMBLER__
-#include <linux/io.h>
-#endif
-#include <asm/sizes.h>
-
-/* Virtual address where registers are mapped */
-#define STMP3XXX_REGS_PHBASE 0x80000000
-#ifdef __ASSEMBLER__
-#define STMP3XXX_REGS_BASE 0xF0000000
-#else
-#define STMP3XXX_REGS_BASE (void __iomem *)0xF0000000
-#endif
-#define STMP3XXX_REGS_SIZE SZ_1M
-
-/* Virtual address where OCRAM is mapped */
-#define STMP3XXX_OCRAM_PHBASE 0x00000000
-#ifdef __ASSEMBLER__
-#define STMP3XXX_OCRAM_BASE 0xf1000000
-#else
-#define STMP3XXX_OCRAM_BASE (void __iomem *)0xf1000000
-#endif
-#define STMP3XXX_OCRAM_SIZE (32 * SZ_1K)
-
-#ifdef CONFIG_ARCH_STMP37XX
-#define IRQ_PRIORITY_REG_RD HW_ICOLL_PRIORITYn_RD
-#define IRQ_PRIORITY_REG_WR HW_ICOLL_PRIORITYn_WR
-#endif
-
-#ifdef CONFIG_ARCH_STMP378X
-#define IRQ_PRIORITY_REG_RD HW_ICOLL_INTERRUPTn_RD
-#define IRQ_PRIORITY_REG_WR HW_ICOLL_INTERRUPTn_WR
-#endif
-
-#define HW_STMP3XXX_SET 0x04
-#define HW_STMP3XXX_CLR 0x08
-#define HW_STMP3XXX_TOG 0x0c
-
-#ifndef __ASSEMBLER__
-static inline void stmp3xxx_clearl(u32 v, void __iomem *r)
-{
- __raw_writel(v, r + HW_STMP3XXX_CLR);
-}
-
-static inline void stmp3xxx_setl(u32 v, void __iomem *r)
-{
- __raw_writel(v, r + HW_STMP3XXX_SET);
-}
-#endif
-
-#define BF(value, field) (((value) << BP_##field) & BM_##field)
-
-#endif /* __ASM_ARCH_PLATFORM_H */
+++ /dev/null
-/*
- * Freescale STMP37XX/STMP378X core structure and function declarations
- *
- * Embedded Alley Solutions, Inc <source@embeddedalley.com>
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#ifndef __ASM_PLAT_STMP3XXX_H
-#define __ASM_PLAT_STMP3XXX_H
-
-#include <linux/irq.h>
-
-extern struct sys_timer stmp3xxx_timer;
-
-void stmp3xxx_init_irq(struct irq_chip *chip);
-void stmp3xxx_init(void);
-int stmp3xxx_reset_block(void __iomem *hwreg, int just_enable);
-extern struct platform_device stmp3xxx_dbguart,
- stmp3xxx_appuart,
- stmp3xxx_watchdog,
- stmp3xxx_touchscreen,
- stmp3xxx_keyboard,
- stmp3xxx_gpmi,
- stmp3xxx_mmc,
- stmp3xxx_udc,
- stmp3xxx_ehci,
- stmp3xxx_rtc,
- stmp3xxx_spi1,
- stmp3xxx_spi2,
- stmp3xxx_backlight,
- stmp3xxx_rotdec,
- stmp3xxx_dcp,
- stmp3xxx_dcp_bootstream,
- stmp3xxx_persistent,
- stmp3xxx_framebuffer,
- stmp3xxx_battery;
-int stmp3xxx_ssp1_device_register(void);
-int stmp3xxx_ssp2_device_register(void);
-
-struct pin_group;
-void stmp3xxx_release_pin_group(struct pin_group *pin_group, const char *label);
-int stmp3xxx_request_pin_group(struct pin_group *pin_group, const char *label);
-
-#endif /* __ASM_PLAT_STMP3XXX_H */
+++ /dev/null
-/*
- * Copyright (C) 2005 Sigmatel Inc
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/proc-fns.h>
-#include <mach/platform.h>
-#include <mach/regs-clkctrl.h>
-#include <mach/regs-power.h>
-
-static inline void arch_idle(void)
-{
- /*
- * This should do all the clock switching
- * and wait for interrupt tricks
- */
-
- cpu_do_idle();
-}
-
-static inline void arch_reset(char mode, const char *cmd)
-{
- /* Set BATTCHRG to default value */
- __raw_writel(0x00010000, REGS_POWER_BASE + HW_POWER_CHARGE);
-
- /* Set MINPWR to default value */
- __raw_writel(0, REGS_POWER_BASE + HW_POWER_MINPWR);
-
- /* Reset digital side of chip (but not power or RTC) */
- __raw_writel(BM_CLKCTRL_RESET_DIG,
- REGS_CLKCTRL_BASE + HW_CLKCTRL_RESET);
-
- /* Should not return */
-}
-
-#endif
+++ /dev/null
-/*
- * Copyright (C) 1999 ARM Limited
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/*
- * System time clock is sourced from the 32k clock
- */
-#define CLOCK_TICK_RATE (32768)
+++ /dev/null
-/*
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#ifndef __ASM_PLAT_UNCOMPRESS_H
-#define __ASM_PLAT_UNCOMPRESS_H
-
-/*
- * Register includes are for when the MMU enabled; we need to define our
- * own stuff here for pre-MMU use
- */
-#define UARTDBG_BASE 0x80070000
-#define UART(c) (((volatile unsigned *)UARTDBG_BASE)[c])
-
-/*
- * This does not append a newline
- */
-static void putc(char c)
-{
- /* Wait for TX fifo empty */
- while ((UART(6) & (1<<7)) == 0)
- continue;
-
- /* Write byte */
- UART(0) = c;
-
- /* Wait for last bit to exit the UART */
- while (UART(6) & (1<<3))
- continue;
-}
-
-static void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-
-#define arch_decomp_wdog()
-
-#endif /* __ASM_PLAT_UNCOMPRESS_H */
+++ /dev/null
-/*
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#define VMALLOC_END 0xf0000000UL
+++ /dev/null
-/*
- * Freescale STMP37XX/STMP378X common interrupt handling code
- *
- * Author: Vladislav Buzov <vbuzov@embeddedalley.com>
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/sysdev.h>
-
-#include <mach/stmp3xxx.h>
-#include <mach/platform.h>
-#include <mach/regs-icoll.h>
-
-void __init stmp3xxx_init_irq(struct irq_chip *chip)
-{
- unsigned int i, lv;
-
- /* Reset the interrupt controller */
- stmp3xxx_reset_block(REGS_ICOLL_BASE + HW_ICOLL_CTRL, true);
-
- /* Disable all interrupts initially */
- for (i = 0; i < NR_REAL_IRQS; i++) {
- chip->irq_mask(irq_get_irq_data(i));
- irq_set_chip_and_handler(i, chip, handle_level_irq);
- set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
- }
-
- /* Ensure vector is cleared */
- for (lv = 0; lv < 4; lv++)
- __raw_writel(1 << lv, REGS_ICOLL_BASE + HW_ICOLL_LEVELACK);
- __raw_writel(0, REGS_ICOLL_BASE + HW_ICOLL_VECTOR);
-
- /* Barrier */
- (void)__raw_readl(REGS_ICOLL_BASE + HW_ICOLL_STAT);
-}
-
+++ /dev/null
-/*
- * Freescale STMP378X/STMP378X Pin Multiplexing
- *
- * Author: Vladislav Buzov <vbuzov@embeddedalley.com>
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#define DEBUG
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/sysdev.h>
-#include <linux/string.h>
-#include <linux/bitops.h>
-#include <linux/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/platform.h>
-#include <mach/regs-pinctrl.h>
-#include <mach/pins.h>
-#include <mach/pinmux.h>
-
-#define NR_BANKS ARRAY_SIZE(pinmux_banks)
-static struct stmp3xxx_pinmux_bank pinmux_banks[] = {
- [0] = {
- .hw_muxsel = {
- REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL0,
- REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL1,
- },
- .hw_drive = {
- REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE0,
- REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE1,
- REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE2,
- REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE3,
- },
- .hw_pull = REGS_PINCTRL_BASE + HW_PINCTRL_PULL0,
- .functions = { 0x0, 0x1, 0x2, 0x3 },
- .strengths = { 0x0, 0x1, 0x2, 0x3, 0xff },
-
- .hw_gpio_in = REGS_PINCTRL_BASE + HW_PINCTRL_DIN0,
- .hw_gpio_out = REGS_PINCTRL_BASE + HW_PINCTRL_DOUT0,
- .hw_gpio_doe = REGS_PINCTRL_BASE + HW_PINCTRL_DOE0,
- .irq = IRQ_GPIO0,
-
- .pin2irq = REGS_PINCTRL_BASE + HW_PINCTRL_PIN2IRQ0,
- .irqstat = REGS_PINCTRL_BASE + HW_PINCTRL_IRQSTAT0,
- .irqlevel = REGS_PINCTRL_BASE + HW_PINCTRL_IRQLEVEL0,
- .irqpolarity = REGS_PINCTRL_BASE + HW_PINCTRL_IRQPOL0,
- .irqen = REGS_PINCTRL_BASE + HW_PINCTRL_IRQEN0,
- },
- [1] = {
- .hw_muxsel = {
- REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL2,
- REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL3,
- },
- .hw_drive = {
- REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE4,
- REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE5,
- REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE6,
- REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE7,
- },
- .hw_pull = REGS_PINCTRL_BASE + HW_PINCTRL_PULL1,
- .functions = { 0x0, 0x1, 0x2, 0x3 },
- .strengths = { 0x0, 0x1, 0x2, 0x3, 0xff },
-
- .hw_gpio_in = REGS_PINCTRL_BASE + HW_PINCTRL_DIN1,
- .hw_gpio_out = REGS_PINCTRL_BASE + HW_PINCTRL_DOUT1,
- .hw_gpio_doe = REGS_PINCTRL_BASE + HW_PINCTRL_DOE1,
- .irq = IRQ_GPIO1,
-
- .pin2irq = REGS_PINCTRL_BASE + HW_PINCTRL_PIN2IRQ1,
- .irqstat = REGS_PINCTRL_BASE + HW_PINCTRL_IRQSTAT1,
- .irqlevel = REGS_PINCTRL_BASE + HW_PINCTRL_IRQLEVEL1,
- .irqpolarity = REGS_PINCTRL_BASE + HW_PINCTRL_IRQPOL1,
- .irqen = REGS_PINCTRL_BASE + HW_PINCTRL_IRQEN1,
- },
- [2] = {
- .hw_muxsel = {
- REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL4,
- REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL5,
- },
- .hw_drive = {
- REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE8,
- REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE9,
- REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE10,
- REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE11,
- },
- .hw_pull = REGS_PINCTRL_BASE + HW_PINCTRL_PULL2,
- .functions = { 0x0, 0x1, 0x2, 0x3 },
- .strengths = { 0x0, 0x1, 0x2, 0x1, 0x2 },
-
- .hw_gpio_in = REGS_PINCTRL_BASE + HW_PINCTRL_DIN2,
- .hw_gpio_out = REGS_PINCTRL_BASE + HW_PINCTRL_DOUT2,
- .hw_gpio_doe = REGS_PINCTRL_BASE + HW_PINCTRL_DOE2,
- .irq = IRQ_GPIO2,
-
- .pin2irq = REGS_PINCTRL_BASE + HW_PINCTRL_PIN2IRQ2,
- .irqstat = REGS_PINCTRL_BASE + HW_PINCTRL_IRQSTAT2,
- .irqlevel = REGS_PINCTRL_BASE + HW_PINCTRL_IRQLEVEL2,
- .irqpolarity = REGS_PINCTRL_BASE + HW_PINCTRL_IRQPOL2,
- .irqen = REGS_PINCTRL_BASE + HW_PINCTRL_IRQEN2,
- },
- [3] = {
- .hw_muxsel = {
- REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL6,
- REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL7,
- },
- .hw_drive = {
- REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE12,
- REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE13,
- REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE14,
- NULL,
- },
- .hw_pull = REGS_PINCTRL_BASE + HW_PINCTRL_PULL3,
- .functions = {0x0, 0x1, 0x2, 0x3},
- .strengths = {0x0, 0x1, 0x2, 0x3, 0xff},
- },
-};
-
-static inline struct stmp3xxx_pinmux_bank *
-stmp3xxx_pinmux_bank(unsigned id, unsigned *bank, unsigned *pin)
-{
- unsigned b, p;
-
- b = STMP3XXX_PINID_TO_BANK(id);
- p = STMP3XXX_PINID_TO_PINNUM(id);
- BUG_ON(b >= NR_BANKS);
- if (bank)
- *bank = b;
- if (pin)
- *pin = p;
- return &pinmux_banks[b];
-}
-
-/* Check if requested pin is owned by caller */
-static int stmp3xxx_check_pin(unsigned id, const char *label)
-{
- unsigned pin;
- struct stmp3xxx_pinmux_bank *pm = stmp3xxx_pinmux_bank(id, NULL, &pin);
-
- if (!test_bit(pin, &pm->pin_map)) {
- printk(KERN_WARNING
- "%s: Accessing free pin %x, caller %s\n",
- __func__, id, label);
-
- return -EINVAL;
- }
-
- if (label && pm->pin_labels[pin] &&
- strcmp(label, pm->pin_labels[pin])) {
- printk(KERN_WARNING
- "%s: Wrong pin owner %x, caller %s owner %s\n",
- __func__, id, label, pm->pin_labels[pin]);
-
- return -EINVAL;
- }
- return 0;
-}
-
-void stmp3xxx_pin_strength(unsigned id, enum pin_strength strength,
- const char *label)
-{
- struct stmp3xxx_pinmux_bank *pbank;
- void __iomem *hwdrive;
- u32 shift, val;
- u32 bank, pin;
-
- pbank = stmp3xxx_pinmux_bank(id, &bank, &pin);
- pr_debug("%s: label %s bank %d pin %d strength %d\n", __func__, label,
- bank, pin, strength);
-
- hwdrive = pbank->hw_drive[pin / HW_DRIVE_PIN_NUM];
- shift = (pin % HW_DRIVE_PIN_NUM) * HW_DRIVE_PIN_LEN;
- val = pbank->strengths[strength];
- if (val == 0xff) {
- printk(KERN_WARNING
- "%s: strength is not supported for bank %d, caller %s",
- __func__, bank, label);
- return;
- }
-
- if (stmp3xxx_check_pin(id, label))
- return;
-
- pr_debug("%s: writing 0x%x to 0x%p register\n", __func__,
- val << shift, hwdrive);
- stmp3xxx_clearl(HW_DRIVE_PINDRV_MASK << shift, hwdrive);
- stmp3xxx_setl(val << shift, hwdrive);
-}
-
-void stmp3xxx_pin_voltage(unsigned id, enum pin_voltage voltage,
- const char *label)
-{
- struct stmp3xxx_pinmux_bank *pbank;
- void __iomem *hwdrive;
- u32 shift;
- u32 bank, pin;
-
- pbank = stmp3xxx_pinmux_bank(id, &bank, &pin);
- pr_debug("%s: label %s bank %d pin %d voltage %d\n", __func__, label,
- bank, pin, voltage);
-
- hwdrive = pbank->hw_drive[pin / HW_DRIVE_PIN_NUM];
- shift = (pin % HW_DRIVE_PIN_NUM) * HW_DRIVE_PIN_LEN;
-
- if (stmp3xxx_check_pin(id, label))
- return;
-
- pr_debug("%s: changing 0x%x bit in 0x%p register\n",
- __func__, HW_DRIVE_PINV_MASK << shift, hwdrive);
- if (voltage == PIN_1_8V)
- stmp3xxx_clearl(HW_DRIVE_PINV_MASK << shift, hwdrive);
- else
- stmp3xxx_setl(HW_DRIVE_PINV_MASK << shift, hwdrive);
-}
-
-void stmp3xxx_pin_pullup(unsigned id, int enable, const char *label)
-{
- struct stmp3xxx_pinmux_bank *pbank;
- void __iomem *hwpull;
- u32 bank, pin;
-
- pbank = stmp3xxx_pinmux_bank(id, &bank, &pin);
- pr_debug("%s: label %s bank %d pin %d enable %d\n", __func__, label,
- bank, pin, enable);
-
- hwpull = pbank->hw_pull;
-
- if (stmp3xxx_check_pin(id, label))
- return;
-
- pr_debug("%s: changing 0x%x bit in 0x%p register\n",
- __func__, 1 << pin, hwpull);
- if (enable)
- stmp3xxx_setl(1 << pin, hwpull);
- else
- stmp3xxx_clearl(1 << pin, hwpull);
-}
-
-int stmp3xxx_request_pin(unsigned id, enum pin_fun fun, const char *label)
-{
- struct stmp3xxx_pinmux_bank *pbank;
- u32 bank, pin;
- int ret = 0;
-
- pbank = stmp3xxx_pinmux_bank(id, &bank, &pin);
- pr_debug("%s: label %s bank %d pin %d fun %d\n", __func__, label,
- bank, pin, fun);
-
- if (test_bit(pin, &pbank->pin_map)) {
- printk(KERN_WARNING
- "%s: CONFLICT DETECTED pin %d:%d caller %s owner %s\n",
- __func__, bank, pin, label, pbank->pin_labels[pin]);
- return -EBUSY;
- }
-
- set_bit(pin, &pbank->pin_map);
- pbank->pin_labels[pin] = label;
-
- stmp3xxx_set_pin_type(id, fun);
-
- return ret;
-}
-
-void stmp3xxx_set_pin_type(unsigned id, enum pin_fun fun)
-{
- struct stmp3xxx_pinmux_bank *pbank;
- void __iomem *hwmux;
- u32 shift, val;
- u32 bank, pin;
-
- pbank = stmp3xxx_pinmux_bank(id, &bank, &pin);
-
- hwmux = pbank->hw_muxsel[pin / HW_MUXSEL_PIN_NUM];
- shift = (pin % HW_MUXSEL_PIN_NUM) * HW_MUXSEL_PIN_LEN;
-
- val = pbank->functions[fun];
- shift = (pin % HW_MUXSEL_PIN_NUM) * HW_MUXSEL_PIN_LEN;
- pr_debug("%s: writing 0x%x to 0x%p register\n",
- __func__, val << shift, hwmux);
- stmp3xxx_clearl(HW_MUXSEL_PINFUN_MASK << shift, hwmux);
- stmp3xxx_setl(val << shift, hwmux);
-}
-
-void stmp3xxx_release_pin(unsigned id, const char *label)
-{
- struct stmp3xxx_pinmux_bank *pbank;
- u32 bank, pin;
-
- pbank = stmp3xxx_pinmux_bank(id, &bank, &pin);
- pr_debug("%s: label %s bank %d pin %d\n", __func__, label, bank, pin);
-
- if (stmp3xxx_check_pin(id, label))
- return;
-
- clear_bit(pin, &pbank->pin_map);
- pbank->pin_labels[pin] = NULL;
-}
-
-int stmp3xxx_request_pin_group(struct pin_group *pin_group, const char *label)
-{
- struct pin_desc *pin;
- int p;
- int err = 0;
-
- /* Allocate and configure pins */
- for (p = 0; p < pin_group->nr_pins; p++) {
- pr_debug("%s: #%d\n", __func__, p);
- pin = &pin_group->pins[p];
-
- err = stmp3xxx_request_pin(pin->id, pin->fun, label);
- if (err)
- goto out_err;
-
- stmp3xxx_pin_strength(pin->id, pin->strength, label);
- stmp3xxx_pin_voltage(pin->id, pin->voltage, label);
- stmp3xxx_pin_pullup(pin->id, pin->pullup, label);
- }
-
- return 0;
-
-out_err:
- /* Release allocated pins in case of error */
- while (--p >= 0) {
- pr_debug("%s: releasing #%d\n", __func__, p);
- stmp3xxx_release_pin(pin_group->pins[p].id, label);
- }
- return err;
-}
-EXPORT_SYMBOL(stmp3xxx_request_pin_group);
-
-void stmp3xxx_release_pin_group(struct pin_group *pin_group, const char *label)
-{
- struct pin_desc *pin;
- int p;
-
- for (p = 0; p < pin_group->nr_pins; p++) {
- pin = &pin_group->pins[p];
- stmp3xxx_release_pin(pin->id, label);
- }
-}
-EXPORT_SYMBOL(stmp3xxx_release_pin_group);
-
-static int stmp3xxx_irq_data_to_gpio(struct irq_data *d,
- struct stmp3xxx_pinmux_bank **bank, unsigned *gpio)
-{
- struct stmp3xxx_pinmux_bank *pm;
-
- for (pm = pinmux_banks; pm < pinmux_banks + NR_BANKS; pm++)
- if (pm->virq <= d->irq && d->irq < pm->virq + 32) {
- *bank = pm;
- *gpio = d->irq - pm->virq;
- return 0;
- }
- return -ENOENT;
-}
-
-static int stmp3xxx_set_irqtype(struct irq_data *d, unsigned type)
-{
- struct stmp3xxx_pinmux_bank *pm;
- unsigned gpio;
- int l, p;
-
- stmp3xxx_irq_data_to_gpio(d, &pm, &gpio);
- switch (type) {
- case IRQ_TYPE_EDGE_RISING:
- l = 0; p = 1; break;
- case IRQ_TYPE_EDGE_FALLING:
- l = 0; p = 0; break;
- case IRQ_TYPE_LEVEL_HIGH:
- l = 1; p = 1; break;
- case IRQ_TYPE_LEVEL_LOW:
- l = 1; p = 0; break;
- default:
- pr_debug("%s: Incorrect GPIO interrupt type 0x%x\n",
- __func__, type);
- return -ENXIO;
- }
-
- if (l)
- stmp3xxx_setl(1 << gpio, pm->irqlevel);
- else
- stmp3xxx_clearl(1 << gpio, pm->irqlevel);
- if (p)
- stmp3xxx_setl(1 << gpio, pm->irqpolarity);
- else
- stmp3xxx_clearl(1 << gpio, pm->irqpolarity);
- return 0;
-}
-
-static void stmp3xxx_pin_ack_irq(struct irq_data *d)
-{
- u32 stat;
- struct stmp3xxx_pinmux_bank *pm;
- unsigned gpio;
-
- stmp3xxx_irq_data_to_gpio(d, &pm, &gpio);
- stat = __raw_readl(pm->irqstat) & (1 << gpio);
- stmp3xxx_clearl(stat, pm->irqstat);
-}
-
-static void stmp3xxx_pin_mask_irq(struct irq_data *d)
-{
- struct stmp3xxx_pinmux_bank *pm;
- unsigned gpio;
-
- stmp3xxx_irq_data_to_gpio(d, &pm, &gpio);
- stmp3xxx_clearl(1 << gpio, pm->irqen);
- stmp3xxx_clearl(1 << gpio, pm->pin2irq);
-}
-
-static void stmp3xxx_pin_unmask_irq(struct irq_data *d)
-{
- struct stmp3xxx_pinmux_bank *pm;
- unsigned gpio;
-
- stmp3xxx_irq_data_to_gpio(d, &pm, &gpio);
- stmp3xxx_setl(1 << gpio, pm->irqen);
- stmp3xxx_setl(1 << gpio, pm->pin2irq);
-}
-
-static inline
-struct stmp3xxx_pinmux_bank *to_pinmux_bank(struct gpio_chip *chip)
-{
- return container_of(chip, struct stmp3xxx_pinmux_bank, chip);
-}
-
-static int stmp3xxx_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
-{
- struct stmp3xxx_pinmux_bank *pm = to_pinmux_bank(chip);
- return pm->virq + offset;
-}
-
-static int stmp3xxx_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
- struct stmp3xxx_pinmux_bank *pm = to_pinmux_bank(chip);
- unsigned v;
-
- v = __raw_readl(pm->hw_gpio_in) & (1 << offset);
- return v ? 1 : 0;
-}
-
-static void stmp3xxx_gpio_set(struct gpio_chip *chip, unsigned offset, int v)
-{
- struct stmp3xxx_pinmux_bank *pm = to_pinmux_bank(chip);
-
- if (v)
- stmp3xxx_setl(1 << offset, pm->hw_gpio_out);
- else
- stmp3xxx_clearl(1 << offset, pm->hw_gpio_out);
-}
-
-static int stmp3xxx_gpio_output(struct gpio_chip *chip, unsigned offset, int v)
-{
- struct stmp3xxx_pinmux_bank *pm = to_pinmux_bank(chip);
-
- stmp3xxx_setl(1 << offset, pm->hw_gpio_doe);
- stmp3xxx_gpio_set(chip, offset, v);
- return 0;
-}
-
-static int stmp3xxx_gpio_input(struct gpio_chip *chip, unsigned offset)
-{
- struct stmp3xxx_pinmux_bank *pm = to_pinmux_bank(chip);
-
- stmp3xxx_clearl(1 << offset, pm->hw_gpio_doe);
- return 0;
-}
-
-static int stmp3xxx_gpio_request(struct gpio_chip *chip, unsigned offset)
-{
- return stmp3xxx_request_pin(chip->base + offset, PIN_GPIO, "gpio");
-}
-
-static void stmp3xxx_gpio_free(struct gpio_chip *chip, unsigned offset)
-{
- stmp3xxx_release_pin(chip->base + offset, "gpio");
-}
-
-static void stmp3xxx_gpio_irq(u32 irq, struct irq_desc *desc)
-{
- struct stmp3xxx_pinmux_bank *pm = irq_get_handler_data(irq);
- int gpio_irq = pm->virq;
- u32 stat = __raw_readl(pm->irqstat);
-
- while (stat) {
- if (stat & 1)
- generic_handle_irq(gpio_irq);
- gpio_irq++;
- stat >>= 1;
- }
-}
-
-static struct irq_chip gpio_irq_chip = {
- .irq_ack = stmp3xxx_pin_ack_irq,
- .irq_mask = stmp3xxx_pin_mask_irq,
- .irq_unmask = stmp3xxx_pin_unmask_irq,
- .irq_set_type = stmp3xxx_set_irqtype,
-};
-
-int __init stmp3xxx_pinmux_init(int virtual_irq_start)
-{
- int b, r = 0;
- struct stmp3xxx_pinmux_bank *pm;
- int virq;
-
- for (b = 0; b < 3; b++) {
- /* only banks 0,1,2 are allowed to GPIO */
- pm = pinmux_banks + b;
- pm->chip.base = 32 * b;
- pm->chip.ngpio = 32;
- pm->chip.owner = THIS_MODULE;
- pm->chip.can_sleep = 1;
- pm->chip.exported = 1;
- pm->chip.to_irq = stmp3xxx_gpio_to_irq;
- pm->chip.direction_input = stmp3xxx_gpio_input;
- pm->chip.direction_output = stmp3xxx_gpio_output;
- pm->chip.get = stmp3xxx_gpio_get;
- pm->chip.set = stmp3xxx_gpio_set;
- pm->chip.request = stmp3xxx_gpio_request;
- pm->chip.free = stmp3xxx_gpio_free;
- pm->virq = virtual_irq_start + b * 32;
-
- for (virq = pm->virq; virq < pm->virq; virq++) {
- gpio_irq_chip.irq_mask(irq_get_irq_data(virq));
- irq_set_chip_and_handler(virq, &gpio_irq_chip,
- handle_level_irq);
- set_irq_flags(virq, IRQF_VALID);
- }
- r = gpiochip_add(&pm->chip);
- if (r < 0)
- break;
- irq_set_chained_handler(pm->irq, stmp3xxx_gpio_irq);
- irq_set_handler_data(pm->irq, pm);
- }
- return r;
-}
-
-MODULE_AUTHOR("Vladislav Buzov");
-MODULE_LICENSE("GPL");
+++ /dev/null
-/*
- * System timer for Freescale STMP37XX/STMP378X
- *
- * Embedded Alley Solutions, Inc <source@embeddedalley.com>
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-
-#include <asm/mach/time.h>
-#include <mach/stmp3xxx.h>
-#include <mach/platform.h>
-#include <mach/regs-timrot.h>
-
-static irqreturn_t
-stmp3xxx_timer_interrupt(int irq, void *dev_id)
-{
- struct clock_event_device *c = dev_id;
-
- /* timer 0 */
- if (__raw_readl(REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL0) &
- BM_TIMROT_TIMCTRLn_IRQ) {
- stmp3xxx_clearl(BM_TIMROT_TIMCTRLn_IRQ,
- REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL0);
- c->event_handler(c);
- }
-
- /* timer 1 */
- else if (__raw_readl(REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL1)
- & BM_TIMROT_TIMCTRLn_IRQ) {
- stmp3xxx_clearl(BM_TIMROT_TIMCTRLn_IRQ,
- REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL1);
- stmp3xxx_clearl(BM_TIMROT_TIMCTRLn_IRQ_EN,
- REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL1);
- __raw_writel(0xFFFF, REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT1);
- }
-
- return IRQ_HANDLED;
-}
-
-static cycle_t stmp3xxx_clock_read(struct clocksource *cs)
-{
- return ~((__raw_readl(REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT1)
- & 0xFFFF0000) >> 16);
-}
-
-static int
-stmp3xxx_timrot_set_next_event(unsigned long delta,
- struct clock_event_device *dev)
-{
- /* reload the timer */
- __raw_writel(delta, REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT0);
- return 0;
-}
-
-static void
-stmp3xxx_timrot_set_mode(enum clock_event_mode mode,
- struct clock_event_device *dev)
-{
-}
-
-static struct clock_event_device ckevt_timrot = {
- .name = "timrot",
- .features = CLOCK_EVT_FEAT_ONESHOT,
- .shift = 32,
- .set_next_event = stmp3xxx_timrot_set_next_event,
- .set_mode = stmp3xxx_timrot_set_mode,
-};
-
-static struct clocksource cksrc_stmp3xxx = {
- .name = "cksrc_stmp3xxx",
- .rating = 250,
- .read = stmp3xxx_clock_read,
- .mask = CLOCKSOURCE_MASK(16),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static struct irqaction stmp3xxx_timer_irq = {
- .name = "stmp3xxx_timer",
- .flags = IRQF_DISABLED | IRQF_TIMER,
- .handler = stmp3xxx_timer_interrupt,
- .dev_id = &ckevt_timrot,
-};
-
-
-/*
- * Set up timer interrupt, and return the current time in seconds.
- */
-static void __init stmp3xxx_init_timer(void)
-{
- ckevt_timrot.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC,
- ckevt_timrot.shift);
- ckevt_timrot.min_delta_ns = clockevent_delta2ns(2, &ckevt_timrot);
- ckevt_timrot.max_delta_ns = clockevent_delta2ns(0xFFF, &ckevt_timrot);
- ckevt_timrot.cpumask = cpumask_of(0);
-
- stmp3xxx_reset_block(REGS_TIMROT_BASE, false);
-
- /* clear two timers */
- __raw_writel(0, REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT0);
- __raw_writel(0, REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT1);
-
- /* configure them */
- __raw_writel(
- (8 << BP_TIMROT_TIMCTRLn_SELECT) | /* 32 kHz */
- BM_TIMROT_TIMCTRLn_RELOAD |
- BM_TIMROT_TIMCTRLn_UPDATE |
- BM_TIMROT_TIMCTRLn_IRQ_EN,
- REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL0);
- __raw_writel(
- (8 << BP_TIMROT_TIMCTRLn_SELECT) | /* 32 kHz */
- BM_TIMROT_TIMCTRLn_RELOAD |
- BM_TIMROT_TIMCTRLn_UPDATE |
- BM_TIMROT_TIMCTRLn_IRQ_EN,
- REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL1);
-
- __raw_writel(CLOCK_TICK_RATE / HZ - 1,
- REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT0);
- __raw_writel(0xFFFF, REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT1);
-
- setup_irq(IRQ_TIMER0, &stmp3xxx_timer_irq);
-
- clocksource_register_hz(&cksrc_stmp3xxx, CLOCK_TICK_RATE);
- clockevents_register_device(&ckevt_timrot);
-}
-
-#ifdef CONFIG_PM
-
-void stmp3xxx_suspend_timer(void)
-{
- stmp3xxx_clearl(BM_TIMROT_TIMCTRLn_IRQ_EN | BM_TIMROT_TIMCTRLn_IRQ,
- REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL0);
- stmp3xxx_setl(BM_TIMROT_ROTCTRL_CLKGATE,
- REGS_TIMROT_BASE + HW_TIMROT_ROTCTRL);
-}
-
-void stmp3xxx_resume_timer(void)
-{
- stmp3xxx_clearl(BM_TIMROT_ROTCTRL_SFTRST | BM_TIMROT_ROTCTRL_CLKGATE,
- REGS_TIMROT_BASE + HW_TIMROT_ROTCTRL);
- __raw_writel(
- 8 << BP_TIMROT_TIMCTRLn_SELECT | /* 32 kHz */
- BM_TIMROT_TIMCTRLn_RELOAD |
- BM_TIMROT_TIMCTRLn_UPDATE |
- BM_TIMROT_TIMCTRLn_IRQ_EN,
- REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL0);
- __raw_writel(
- 8 << BP_TIMROT_TIMCTRLn_SELECT | /* 32 kHz */
- BM_TIMROT_TIMCTRLn_RELOAD |
- BM_TIMROT_TIMCTRLn_UPDATE |
- BM_TIMROT_TIMCTRLn_IRQ_EN,
- REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL1);
- __raw_writel(CLOCK_TICK_RATE / HZ - 1,
- REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT0);
- __raw_writel(0xFFFF, REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT1);
-}
-
-#else
-
-#define stmp3xxx_suspend_timer NULL
-#define stmp3xxx_resume_timer NULL
-
-#endif /* CONFIG_PM */
-
-struct sys_timer stmp3xxx_timer = {
- .init = stmp3xxx_init_timer,
- .suspend = stmp3xxx_suspend_timer,
- .resume = stmp3xxx_resume_timer,
-};
#include <linux/smp.h>
#include <asm/cacheflush.h>
+#include <asm/hardware/gic.h>
/*
* control for which core is the next to come out of the secondary
* the boot monitor to read the system wide flags register,
* and branch to the address found there.
*/
- smp_cross_call(cpumask_of(cpu), 1);
+ gic_raise_softirq(cpumask_of(cpu), 1);
timeout = jiffies + (1 * HZ);
while (time_before(jiffies, timeout)) {
You will still need the parsing functions to be called by the driver
for your particular device. It won't happen automatically. The
- 'armflash' map driver (CONFIG_MTD_ARM_INTEGRATOR) does this, for
- example.
+ 'physmap' map driver (CONFIG_MTD_PHYSMAP) does this, for example.
config MTD_OF_PARTS
def_bool y
# Chip mappings
obj-$(CONFIG_MTD_CDB89712) += cdb89712.o
-obj-$(CONFIG_MTD_ARM_INTEGRATOR)+= integrator-flash.o
obj-$(CONFIG_MTD_CFI_FLAGADM) += cfi_flagadm.o
obj-$(CONFIG_MTD_DC21285) += dc21285.o
obj-$(CONFIG_MTD_DILNETPC) += dilnetpc.o
+++ /dev/null
-/*======================================================================
-
- drivers/mtd/maps/integrator-flash.c: ARM Integrator flash map driver
-
- Copyright (C) 2000 ARM Limited
- Copyright (C) 2003 Deep Blue Solutions Ltd.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-
- This is access code for flashes using ARM's flash partitioning
- standards.
-
-======================================================================*/
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/concat.h>
-
-#include <asm/mach/flash.h>
-#include <mach/hardware.h>
-#include <asm/system.h>
-
-struct armflash_subdev_info {
- char *name;
- struct mtd_info *mtd;
- struct map_info map;
- struct flash_platform_data *plat;
-};
-
-struct armflash_info {
- struct resource *res;
- struct mtd_partition *parts;
- struct mtd_info *mtd;
- int nr_subdev;
- struct armflash_subdev_info subdev[0];
-};
-
-static void armflash_set_vpp(struct map_info *map, int on)
-{
- struct armflash_subdev_info *info =
- container_of(map, struct armflash_subdev_info, map);
-
- if (info->plat && info->plat->set_vpp)
- info->plat->set_vpp(on);
-}
-
-static const char *probes[] = { "cmdlinepart", "RedBoot", "afs", NULL };
-
-static int armflash_subdev_probe(struct armflash_subdev_info *subdev,
- struct resource *res)
-{
- struct flash_platform_data *plat = subdev->plat;
- resource_size_t size = res->end - res->start + 1;
- void __iomem *base;
- int err = 0;
-
- if (!request_mem_region(res->start, size, subdev->name)) {
- err = -EBUSY;
- goto out;
- }
-
- base = ioremap(res->start, size);
- if (!base) {
- err = -ENOMEM;
- goto no_mem;
- }
-
- /*
- * look for CFI based flash parts fitted to this board
- */
- subdev->map.size = size;
- subdev->map.bankwidth = plat->width;
- subdev->map.phys = res->start;
- subdev->map.virt = base;
- subdev->map.name = subdev->name;
- subdev->map.set_vpp = armflash_set_vpp;
-
- simple_map_init(&subdev->map);
-
- /*
- * Also, the CFI layer automatically works out what size
- * of chips we have, and does the necessary identification
- * for us automatically.
- */
- subdev->mtd = do_map_probe(plat->map_name, &subdev->map);
- if (!subdev->mtd) {
- err = -ENXIO;
- goto no_device;
- }
-
- subdev->mtd->owner = THIS_MODULE;
-
- /* Successful? */
- if (err == 0)
- return err;
-
- if (subdev->mtd)
- map_destroy(subdev->mtd);
- no_device:
- iounmap(base);
- no_mem:
- release_mem_region(res->start, size);
- out:
- return err;
-}
-
-static void armflash_subdev_remove(struct armflash_subdev_info *subdev)
-{
- if (subdev->mtd)
- map_destroy(subdev->mtd);
- if (subdev->map.virt)
- iounmap(subdev->map.virt);
- kfree(subdev->name);
- subdev->name = NULL;
- release_mem_region(subdev->map.phys, subdev->map.size);
-}
-
-static int armflash_probe(struct platform_device *dev)
-{
- struct flash_platform_data *plat = dev->dev.platform_data;
- unsigned int size;
- struct armflash_info *info;
- int i, nr, err;
-
- /* Count the number of devices */
- for (nr = 0; ; nr++)
- if (!platform_get_resource(dev, IORESOURCE_MEM, nr))
- break;
- if (nr == 0) {
- err = -ENODEV;
- goto out;
- }
-
- size = sizeof(struct armflash_info) +
- sizeof(struct armflash_subdev_info) * nr;
- info = kzalloc(size, GFP_KERNEL);
- if (!info) {
- err = -ENOMEM;
- goto out;
- }
-
- if (plat && plat->init) {
- err = plat->init();
- if (err)
- goto no_resource;
- }
-
- for (i = 0; i < nr; i++) {
- struct armflash_subdev_info *subdev = &info->subdev[i];
- struct resource *res;
-
- res = platform_get_resource(dev, IORESOURCE_MEM, i);
- if (!res)
- break;
-
- if (nr == 1)
- /* No MTD concatenation, just use the default name */
- subdev->name = kstrdup(dev_name(&dev->dev), GFP_KERNEL);
- else
- subdev->name = kasprintf(GFP_KERNEL, "%s-%d",
- dev_name(&dev->dev), i);
- if (!subdev->name) {
- err = -ENOMEM;
- break;
- }
- subdev->plat = plat;
-
- err = armflash_subdev_probe(subdev, res);
- if (err) {
- kfree(subdev->name);
- subdev->name = NULL;
- break;
- }
- }
- info->nr_subdev = i;
-
- if (err)
- goto subdev_err;
-
- if (info->nr_subdev == 1)
- info->mtd = info->subdev[0].mtd;
- else if (info->nr_subdev > 1) {
- struct mtd_info *cdev[info->nr_subdev];
-
- /*
- * We detected multiple devices. Concatenate them together.
- */
- for (i = 0; i < info->nr_subdev; i++)
- cdev[i] = info->subdev[i].mtd;
-
- info->mtd = mtd_concat_create(cdev, info->nr_subdev,
- dev_name(&dev->dev));
- if (info->mtd == NULL)
- err = -ENXIO;
- }
-
- if (err < 0)
- goto cleanup;
-
- err = parse_mtd_partitions(info->mtd, probes, &info->parts, 0);
- if (err > 0) {
- err = add_mtd_partitions(info->mtd, info->parts, err);
- if (err)
- printk(KERN_ERR
- "mtd partition registration failed: %d\n", err);
- }
-
- if (err == 0) {
- platform_set_drvdata(dev, info);
- return err;
- }
-
- /*
- * We got an error, free all resources.
- */
- cleanup:
- if (info->mtd) {
- del_mtd_partitions(info->mtd);
- if (info->mtd != info->subdev[0].mtd)
- mtd_concat_destroy(info->mtd);
- }
- kfree(info->parts);
- subdev_err:
- for (i = info->nr_subdev - 1; i >= 0; i--)
- armflash_subdev_remove(&info->subdev[i]);
- no_resource:
- if (plat && plat->exit)
- plat->exit();
- kfree(info);
- out:
- return err;
-}
-
-static int armflash_remove(struct platform_device *dev)
-{
- struct armflash_info *info = platform_get_drvdata(dev);
- struct flash_platform_data *plat = dev->dev.platform_data;
- int i;
-
- platform_set_drvdata(dev, NULL);
-
- if (info) {
- if (info->mtd) {
- del_mtd_partitions(info->mtd);
- if (info->mtd != info->subdev[0].mtd)
- mtd_concat_destroy(info->mtd);
- }
- kfree(info->parts);
-
- for (i = info->nr_subdev - 1; i >= 0; i--)
- armflash_subdev_remove(&info->subdev[i]);
-
- if (plat && plat->exit)
- plat->exit();
-
- kfree(info);
- }
-
- return 0;
-}
-
-static struct platform_driver armflash_driver = {
- .probe = armflash_probe,
- .remove = armflash_remove,
- .driver = {
- .name = "armflash",
- .owner = THIS_MODULE,
- },
-};
-
-static int __init armflash_init(void)
-{
- return platform_driver_register(&armflash_driver);
-}
-
-static void __exit armflash_exit(void)
-{
- platform_driver_unregister(&armflash_driver);
-}
-
-module_init(armflash_init);
-module_exit(armflash_exit);
-
-MODULE_AUTHOR("ARM Ltd");
-MODULE_DESCRIPTION("ARM Integrator CFI map driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:armflash");
if (info->mtd[i] != NULL)
map_destroy(info->mtd[i]);
}
+
+ if (physmap_data->exit)
+ physmap_data->exit(dev);
+
return 0;
}
+static void physmap_set_vpp(struct map_info *map, int state)
+{
+ struct platform_device *pdev;
+ struct physmap_flash_data *physmap_data;
+
+ pdev = (struct platform_device *)map->map_priv_1;
+ physmap_data = pdev->dev.platform_data;
+
+ if (physmap_data->set_vpp)
+ physmap_data->set_vpp(pdev, state);
+}
+
static const char *rom_probe_types[] = {
"cfi_probe",
"jedec_probe",
"map_rom",
NULL };
#ifdef CONFIG_MTD_PARTITIONS
-static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL };
+static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", "afs",
+ NULL };
#endif
static int physmap_flash_probe(struct platform_device *dev)
goto err_out;
}
+ if (physmap_data->init) {
+ err = physmap_data->init(dev);
+ if (err)
+ goto err_out;
+ }
+
platform_set_drvdata(dev, info);
for (i = 0; i < dev->num_resources; i++) {
info->map[i].phys = dev->resource[i].start;
info->map[i].size = resource_size(&dev->resource[i]);
info->map[i].bankwidth = physmap_data->width;
- info->map[i].set_vpp = physmap_data->set_vpp;
+ info->map[i].set_vpp = physmap_set_vpp;
info->map[i].pfow_base = physmap_data->pfow_base;
+ info->map[i].map_priv_1 = (unsigned long)dev;
info->map[i].virt = devm_ioremap(&dev->dev, info->map[i].phys,
info->map[i].size);
struct platform_device *dev[PISMO_NUM_CS];
};
-/* FIXME: set_vpp could do with a better calling convention */
-static struct pismo_data *vpp_pismo;
-static DEFINE_MUTEX(pismo_mutex);
-
-static int pismo_setvpp_probe_fix(struct pismo_data *pismo)
+static void pismo_set_vpp(struct platform_device *pdev, int on)
{
- mutex_lock(&pismo_mutex);
- if (vpp_pismo) {
- mutex_unlock(&pismo_mutex);
- kfree(pismo);
- return -EBUSY;
- }
- vpp_pismo = pismo;
- mutex_unlock(&pismo_mutex);
- return 0;
-}
-
-static void pismo_setvpp_remove_fix(struct pismo_data *pismo)
-{
- mutex_lock(&pismo_mutex);
- if (vpp_pismo == pismo)
- vpp_pismo = NULL;
- mutex_unlock(&pismo_mutex);
-}
-
-static void pismo_set_vpp(struct map_info *map, int on)
-{
- struct pismo_data *pismo = vpp_pismo;
+ struct i2c_client *client = to_i2c_client(pdev->dev.parent);
+ struct pismo_data *pismo = i2c_get_clientdata(client);
pismo->vpp(pismo->vpp_data, on);
}
-/* end of hack */
-
static unsigned int __devinit pismo_width_to_bytes(unsigned int width)
{
for (i = 0; i < ARRAY_SIZE(pismo->dev); i++)
platform_device_unregister(pismo->dev[i]);
- /* FIXME: set_vpp needs saner arguments */
- pismo_setvpp_remove_fix(pismo);
-
kfree(pismo);
return 0;
if (!pismo)
return -ENOMEM;
- /* FIXME: set_vpp needs saner arguments */
- ret = pismo_setvpp_probe_fix(pismo);
- if (ret)
- return ret;
-
pismo->client = client;
if (pdata) {
pismo->vpp = pdata->set_vpp;
struct physmap_flash_data {
unsigned int width;
- void (*set_vpp)(struct map_info *, int);
+ int (*init)(struct platform_device *);
+ void (*exit)(struct platform_device *);
+ void (*set_vpp)(struct platform_device *, int);
unsigned int nr_parts;
unsigned int pfow_base;
char *probe_type;
git.openpandora.org / pandora-kernel.git / commitdiff