tty: kref the rocket driver
authorAlan Cox <alan@redhat.com>
Fri, 2 Jan 2009 13:48:30 +0000 (13:48 +0000)
committerLinus Torvalds <torvalds@linux-foundation.org>
Fri, 2 Jan 2009 18:19:41 +0000 (10:19 -0800)
We will need this kref fitted to make full use of the port operations.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drivers/char/rocket.c

index ca6fcdc..b5e5e77 100644 (file)
@@ -436,15 +436,15 @@ static void rp_do_transmit(struct r_port *info)
 #endif
        if (!info)
                return;
-       if (!info->port.tty) {
-               printk(KERN_WARNING "rp: WARNING %s called with "
-                               "info->port.tty==NULL\n", __func__);
+       tty = tty_port_tty_get(&info->port);
+
+       if (tty == NULL) {
+               printk(KERN_WARNING "rp: WARNING %s called with tty==NULL\n", __func__);
                clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
                return;
        }
 
        spin_lock_irqsave(&info->slock, flags);
-       tty = info->port.tty;
        info->xmit_fifo_room = TXFIFO_SIZE - sGetTxCnt(cp);
 
        /*  Loop sending data to FIFO until done or FIFO full */
@@ -478,6 +478,7 @@ static void rp_do_transmit(struct r_port *info)
        }
 
        spin_unlock_irqrestore(&info->slock, flags);
+       tty_kref_put(tty);
 
 #ifdef ROCKET_DEBUG_INTR
        printk(KERN_DEBUG "(%d,%d,%d,%d)...\n", info->xmit_cnt, info->xmit_head,
@@ -504,13 +505,13 @@ static void rp_handle_port(struct r_port *info)
                                "info->flags & NOT_INIT\n");
                return;
        }
-       if (!info->port.tty) {
+       tty = tty_port_tty_get(&info->port);
+       if (!tty) {
                printk(KERN_WARNING "rp: WARNING: rp_handle_port called with "
-                               "info->port.tty==NULL\n");
+                               "tty==NULL\n");
                return;
        }
        cp = &info->channel;
-       tty = info->port.tty;
 
        IntMask = sGetChanIntID(cp) & info->intmask;
 #ifdef ROCKET_DEBUG_INTR
@@ -542,6 +543,7 @@ static void rp_handle_port(struct r_port *info)
                printk(KERN_INFO "DSR change...\n");
        }
 #endif
+       tty_kref_put(tty);
 }
 
 /*
@@ -710,7 +712,7 @@ static void init_r_port(int board, int aiop, int chan, struct pci_dev *pci_dev)
  *  Configures a rocketport port according to its termio settings.  Called from 
  *  user mode into the driver (exception handler).  *info CD manipulation is spinlock protected.
  */
-static void configure_r_port(struct r_port *info,
+static void configure_r_port(struct tty_struct *tty, struct r_port *info,
                             struct ktermios *old_termios)
 {
        unsigned cflag;
@@ -718,7 +720,7 @@ static void configure_r_port(struct r_port *info,
        unsigned rocketMode;
        int bits, baud, divisor;
        CHANNEL_t *cp;
-       struct ktermios *t = info->port.tty->termios;
+       struct ktermios *t = tty->termios;
 
        cp = &info->channel;
        cflag = t->c_cflag;
@@ -751,7 +753,7 @@ static void configure_r_port(struct r_port *info,
        }
 
        /* baud rate */
-       baud = tty_get_baud_rate(info->port.tty);
+       baud = tty_get_baud_rate(tty);
        if (!baud)
                baud = 9600;
        divisor = ((rp_baud_base[info->board] + (baud >> 1)) / baud) - 1;
@@ -769,7 +771,7 @@ static void configure_r_port(struct r_port *info,
        sSetBaud(cp, divisor);
 
        /* FIXME: Should really back compute a baud rate from the divisor */
-       tty_encode_baud_rate(info->port.tty, baud, baud);
+       tty_encode_baud_rate(tty, baud, baud);
 
        if (cflag & CRTSCTS) {
                info->intmask |= DELTA_CTS;
@@ -794,15 +796,15 @@ static void configure_r_port(struct r_port *info,
         * Handle software flow control in the board
         */
 #ifdef ROCKET_SOFT_FLOW
-       if (I_IXON(info->port.tty)) {
+       if (I_IXON(tty)) {
                sEnTxSoftFlowCtl(cp);
-               if (I_IXANY(info->port.tty)) {
+               if (I_IXANY(tty)) {
                        sEnIXANY(cp);
                } else {
                        sDisIXANY(cp);
                }
-               sSetTxXONChar(cp, START_CHAR(info->port.tty));
-               sSetTxXOFFChar(cp, STOP_CHAR(info->port.tty));
+               sSetTxXONChar(cp, START_CHAR(tty));
+               sSetTxXOFFChar(cp, STOP_CHAR(tty));
        } else {
                sDisTxSoftFlowCtl(cp);
                sDisIXANY(cp);
@@ -814,24 +816,24 @@ static void configure_r_port(struct r_port *info,
         * Set up ignore/read mask words
         */
        info->read_status_mask = STMRCVROVRH | 0xFF;
-       if (I_INPCK(info->port.tty))
+       if (I_INPCK(tty))
                info->read_status_mask |= STMFRAMEH | STMPARITYH;
-       if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
+       if (I_BRKINT(tty) || I_PARMRK(tty))
                info->read_status_mask |= STMBREAKH;
 
        /*
         * Characters to ignore
         */
        info->ignore_status_mask = 0;
-       if (I_IGNPAR(info->port.tty))
+       if (I_IGNPAR(tty))
                info->ignore_status_mask |= STMFRAMEH | STMPARITYH;
-       if (I_IGNBRK(info->port.tty)) {
+       if (I_IGNBRK(tty)) {
                info->ignore_status_mask |= STMBREAKH;
                /*
                 * If we're ignoring parity and break indicators,
                 * ignore overruns too.  (For real raw support).
                 */
-               if (I_IGNPAR(info->port.tty))
+               if (I_IGNPAR(tty))
                        info->ignore_status_mask |= STMRCVROVRH;
        }
 
@@ -1015,7 +1017,7 @@ static int rp_open(struct tty_struct *tty, struct file *filp)
                info->xmit_buf = (unsigned char *) page;
 
        tty->driver_data = info;
-       info->port.tty = tty;
+       tty_port_tty_set(&info->port, tty);
 
        if (info->port.count++ == 0) {
                atomic_inc(&rp_num_ports_open);
@@ -1062,15 +1064,15 @@ static int rp_open(struct tty_struct *tty, struct file *filp)
                 * Set up the tty->alt_speed kludge
                 */
                if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_HI)
-                       info->port.tty->alt_speed = 57600;
+                       tty->alt_speed = 57600;
                if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_VHI)
-                       info->port.tty->alt_speed = 115200;
+                       tty->alt_speed = 115200;
                if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_SHI)
-                       info->port.tty->alt_speed = 230400;
+                       tty->alt_speed = 230400;
                if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_WARP)
-                       info->port.tty->alt_speed = 460800;
+                       tty->alt_speed = 460800;
 
-               configure_r_port(info, NULL);
+               configure_r_port(tty, info, NULL);
                if (tty->termios->c_cflag & CBAUD) {
                        sSetDTR(cp);
                        sSetRTS(cp);
@@ -1227,7 +1229,7 @@ static void rp_set_termios(struct tty_struct *tty,
        /* Or CMSPAR */
        tty->termios->c_cflag &= ~CMSPAR;
 
-       configure_r_port(info, old_termios);
+       configure_r_port(tty, info, old_termios);
 
        cp = &info->channel;
 
@@ -1352,7 +1354,8 @@ static int get_config(struct r_port *info, struct rocket_config __user *retinfo)
        return 0;
 }
 
-static int set_config(struct r_port *info, struct rocket_config __user *new_info)
+static int set_config(struct tty_struct *tty, struct r_port *info,
+                                       struct rocket_config __user *new_info)
 {
        struct rocket_config new_serial;
 
@@ -1364,7 +1367,7 @@ static int set_config(struct r_port *info, struct rocket_config __user *new_info
                if ((new_serial.flags & ~ROCKET_USR_MASK) != (info->flags & ~ROCKET_USR_MASK))
                        return -EPERM;
                info->flags = ((info->flags & ~ROCKET_USR_MASK) | (new_serial.flags & ROCKET_USR_MASK));
-               configure_r_port(info, NULL);
+               configure_r_port(tty, info, NULL);
                return 0;
        }
 
@@ -1373,15 +1376,15 @@ static int set_config(struct r_port *info, struct rocket_config __user *new_info
        info->port.closing_wait = new_serial.closing_wait;
 
        if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_HI)
-               info->port.tty->alt_speed = 57600;
+               tty->alt_speed = 57600;
        if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_VHI)
-               info->port.tty->alt_speed = 115200;
+               tty->alt_speed = 115200;
        if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_SHI)
-               info->port.tty->alt_speed = 230400;
+               tty->alt_speed = 230400;
        if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_WARP)
-               info->port.tty->alt_speed = 460800;
+               tty->alt_speed = 460800;
 
-       configure_r_port(info, NULL);
+       configure_r_port(tty, info, NULL);
        return 0;
 }
 
@@ -1466,7 +1469,7 @@ static int rp_ioctl(struct tty_struct *tty, struct file *file,
                ret = get_config(info, argp);
                break;
        case RCKP_SET_CONFIG:
-               ret = set_config(info, argp);
+               ret = set_config(tty, info, argp);
                break;
        case RCKP_GET_PORTS:
                ret = get_ports(info, argp);
@@ -1658,7 +1661,7 @@ static void rp_hangup(struct tty_struct *tty)
 
        info->port.count = 0;
        info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
-       info->port.tty = NULL;
+       tty_port_tty_set(&info->port, NULL);
 
        cp = &info->channel;
        sDisRxFIFO(cp);
@@ -1778,7 +1781,8 @@ static int rp_write(struct tty_struct *tty,
 
        /*  Write remaining data into the port's xmit_buf */
        while (1) {
-               if (!info->port.tty)            /* Seemingly obligatory check... */
+               /* Hung up ? */
+               if (!test_bit(ASYNC_NORMAL_ACTIVE, &info->port.flags))
                        goto end;
                c = min(count, XMIT_BUF_SIZE - info->xmit_cnt - 1);
                c = min(c, XMIT_BUF_SIZE - info->xmit_head);