OMAP2/3: GPIO: generalize prepare for idle

Currently, the GPIO 'prepare' hook is only called when going to
off-mode, while the function is called 'prepare_for_retention.'  This
patch renames the function to 'prepare_for_idle' and calls it for any
powersate != PWRDM_POWER_ON passing in the powerstate.

The hook itself is then responsible for doing various preparation
based on the powerstate.

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index 374299e..7816c4e 100644 (file)
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -107,7 +107,7 @@ static void omap2_enter_full_retention(void)
        l = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0) | OMAP24XX_USBSTANDBYCTRL;
        omap_ctrl_writel(l, OMAP2_CONTROL_DEVCONF0);
 
-       omap2_gpio_prepare_for_retention();
+       omap2_gpio_prepare_for_idle(PWRDM_POWER_RET);
 
        if (omap2_pm_debug) {
                omap2_pm_dump(0, 0, 0);
@@ -141,7 +141,7 @@ no_sleep:
                tmp = timespec_to_ns(&ts_idle) * NSEC_PER_USEC;
                omap2_pm_dump(0, 1, tmp);
        }
-       omap2_gpio_resume_after_retention();
+       omap2_gpio_resume_after_idle();
 
        clk_enable(osc_ck);
 

diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 5de07db..468e1e3 100644 (file)
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -376,15 +376,14 @@ void omap_sram_idle(void)
        core_next_state = pwrdm_read_next_pwrst(core_pwrdm);
        if (per_next_state < PWRDM_POWER_ON) {
                omap_uart_prepare_idle(2);
+               omap2_gpio_prepare_for_idle(per_next_state);
                if (per_next_state == PWRDM_POWER_OFF) {
                        if (core_next_state == PWRDM_POWER_ON) {
                                per_next_state = PWRDM_POWER_RET;
                                pwrdm_set_next_pwrst(per_pwrdm, per_next_state);
                                per_state_modified = 1;
-                       } else {
-                               omap2_gpio_prepare_for_retention();
+                       } else
                                omap3_per_save_context();
-                       }
                }
        }
 
@@ -455,10 +454,9 @@ void omap_sram_idle(void)
        /* PER */
        if (per_next_state < PWRDM_POWER_ON) {
                per_prev_state = pwrdm_read_prev_pwrst(per_pwrdm);
-               if (per_prev_state == PWRDM_POWER_OFF) {
+               omap2_gpio_resume_after_idle();
+               if (per_prev_state == PWRDM_POWER_OFF)
                        omap3_per_restore_context();
-                       omap2_gpio_resume_after_retention();
-               }
                omap_uart_resume_idle(2);
                if (per_state_modified)
                        pwrdm_set_next_pwrst(per_pwrdm, PWRDM_POWER_OFF);

diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 2f185ff..1c81340 100644 (file)
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -27,6 +27,7 @@
 #include <mach/irqs.h>
 #include <mach/gpio.h>
 #include <asm/mach/irq.h>
+#include <plat/powerdomain.h>
 
 /*
  * OMAP1510 GPIO registers
@@ -2041,19 +2042,24 @@ static struct sys_device omap_gpio_device = {
 
 static int workaround_enabled;
 
-void omap2_gpio_prepare_for_retention(void)
+void omap2_gpio_prepare_for_idle(int power_state)
 {
        int i, c = 0;
        int min = 0;
 
        if (cpu_is_omap34xx())
                min = 1;
-       /* Remove triggering for all non-wakeup GPIOs.  Otherwise spurious
-        * IRQs will be generated.  See OMAP2420 Errata item 1.101. */
+
        for (i = min; i < gpio_bank_count; i++) {
                struct gpio_bank *bank = &gpio_bank[i];
                u32 l1, l2;
 
+               if (power_state > PWRDM_POWER_OFF)
+                       continue;
+
+               /* If going to OFF, remove triggering for all
+                * non-wakeup GPIOs.  Otherwise spurious IRQs will be
+                * generated.  See OMAP2420 Errata item 1.101. */
                if (!(bank->enabled_non_wakeup_gpios))
                        continue;
 
@@ -2101,19 +2107,20 @@ void omap2_gpio_prepare_for_retention(void)
        workaround_enabled = 1;
 }
 
-void omap2_gpio_resume_after_retention(void)
+void omap2_gpio_resume_after_idle(void)
 {
        int i;
        int min = 0;
 
-       if (!workaround_enabled)
-               return;
        if (cpu_is_omap34xx())
                min = 1;
        for (i = min; i < gpio_bank_count; i++) {
                struct gpio_bank *bank = &gpio_bank[i];
                u32 l, gen, gen0, gen1;
 
+               if (!workaround_enabled)
+                       continue;
+
                if (!(bank->enabled_non_wakeup_gpios))
                        continue;
 

diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h
index de7c547..de1c604 100644 (file)
--- a/arch/arm/plat-omap/include/plat/gpio.h
+++ b/arch/arm/plat-omap/include/plat/gpio.h
@@ -72,8 +72,8 @@
                                 IH_GPIO_BASE + (nr))
 
 extern int omap_gpio_init(void);       /* Call from board init only */
-extern void omap2_gpio_prepare_for_retention(void);
-extern void omap2_gpio_resume_after_retention(void);
+extern void omap2_gpio_prepare_for_idle(int power_state);
+extern void omap2_gpio_resume_after_idle(void);
 extern void omap_set_gpio_debounce(int gpio, int enable);
 extern void omap_set_gpio_debounce_time(int gpio, int enable);
 extern void omap_gpio_save_context(void);