--- /dev/null
+/*
+ * Intel 82975X Memory Controller kernel module
+ * (C) 2007 aCarLab (India) Pvt. Ltd. (http://acarlab.com)
+ * (C) 2007 jetzbroadband (http://jetzbroadband.com)
+ * This file may be distributed under the terms of the
+ * GNU General Public License.
+ *
+ * Written by Arvind R.
+ * Copied from i82875p_edac.c source:
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/slab.h>
+
+#include "edac_core.h"
+
+#define I82975X_REVISION " Ver: 1.0.0 " __DATE__
+#define EDAC_MOD_STR "i82975x_edac"
+
+#define i82975x_printk(level, fmt, arg...) \
+ edac_printk(level, "i82975x", fmt, ##arg)
+
+#define i82975x_mc_printk(mci, level, fmt, arg...) \
+ edac_mc_chipset_printk(mci, level, "i82975x", fmt, ##arg)
+
+#ifndef PCI_DEVICE_ID_INTEL_82975_0
+#define PCI_DEVICE_ID_INTEL_82975_0 0x277c
+#endif /* PCI_DEVICE_ID_INTEL_82975_0 */
+
+#define I82975X_NR_CSROWS(nr_chans) (8/(nr_chans))
+
+/* Intel 82975X register addresses - device 0 function 0 - DRAM Controller */
+#define I82975X_EAP 0x58 /* Dram Error Address Pointer (32b)
+ *
+ * 31:7 128 byte cache-line address
+ * 6:1 reserved
+ * 0 0: CH0; 1: CH1
+ */
+
+#define I82975X_DERRSYN 0x5c /* Dram Error SYNdrome (8b)
+ *
+ * 7:0 DRAM ECC Syndrome
+ */
+
+#define I82975X_DES 0x5d /* Dram ERRor DeSTination (8b)
+ * 0h: Processor Memory Reads
+ * 1h:7h reserved
+ * More - See Page 65 of Intel DocSheet.
+ */
+
+#define I82975X_ERRSTS 0xc8 /* Error Status Register (16b)
+ *
+ * 15:12 reserved
+ * 11 Thermal Sensor Event
+ * 10 reserved
+ * 9 non-DRAM lock error (ndlock)
+ * 8 Refresh Timeout
+ * 7:2 reserved
+ * 1 ECC UE (multibit DRAM error)
+ * 0 ECC CE (singlebit DRAM error)
+ */
+
+/* Error Reporting is supported by 3 mechanisms:
+ 1. DMI SERR generation ( ERRCMD )
+ 2. SMI DMI generation ( SMICMD )
+ 3. SCI DMI generation ( SCICMD )
+NOTE: Only ONE of the three must be enabled
+*/
+#define I82975X_ERRCMD 0xca /* Error Command (16b)
+ *
+ * 15:12 reserved
+ * 11 Thermal Sensor Event
+ * 10 reserved
+ * 9 non-DRAM lock error (ndlock)
+ * 8 Refresh Timeout
+ * 7:2 reserved
+ * 1 ECC UE (multibit DRAM error)
+ * 0 ECC CE (singlebit DRAM error)
+ */
+
+#define I82975X_SMICMD 0xcc /* Error Command (16b)
+ *
+ * 15:2 reserved
+ * 1 ECC UE (multibit DRAM error)
+ * 0 ECC CE (singlebit DRAM error)
+ */
+
+#define I82975X_SCICMD 0xce /* Error Command (16b)
+ *
+ * 15:2 reserved
+ * 1 ECC UE (multibit DRAM error)
+ * 0 ECC CE (singlebit DRAM error)
+ */
+
+#define I82975X_XEAP 0xfc /* Extended Dram Error Address Pointer (8b)
+ *
+ * 7:1 reserved
+ * 0 Bit32 of the Dram Error Address
+ */
+
+#define I82975X_MCHBAR 0x44 /*
+ *
+ * 31:14 Base Addr of 16K memory-mapped
+ * configuration space
+ * 13:1 reserverd
+ * 0 mem-mapped config space enable
+ */
+
+/* NOTE: Following addresses have to indexed using MCHBAR offset (44h, 32b) */
+/* Intel 82975x memory mapped register space */
+
+#define I82975X_DRB_SHIFT 25 /* fixed 32MiB grain */
+
+#define I82975X_DRB 0x100 /* DRAM Row Boundary (8b x 8)
+ *
+ * 7 set to 1 in highest DRB of
+ * channel if 4GB in ch.
+ * 6:2 upper boundary of rank in
+ * 32MB grains
+ * 1:0 set to 0
+ */
+#define I82975X_DRB_CH0R0 0x100
+#define I82975X_DRB_CH0R1 0x101
+#define I82975X_DRB_CH0R2 0x102
+#define I82975X_DRB_CH0R3 0x103
+#define I82975X_DRB_CH1R0 0x180
+#define I82975X_DRB_CH1R1 0x181
+#define I82975X_DRB_CH1R2 0x182
+#define I82975X_DRB_CH1R3 0x183
+
+
+#define I82975X_DRA 0x108 /* DRAM Row Attribute (4b x 8)
+ * defines the PAGE SIZE to be used
+ * for the rank
+ * 7 reserved
+ * 6:4 row attr of odd rank, i.e. 1
+ * 3 reserved
+ * 2:0 row attr of even rank, i.e. 0
+ *
+ * 000 = unpopulated
+ * 001 = reserved
+ * 010 = 4KiB
+ * 011 = 8KiB
+ * 100 = 16KiB
+ * others = reserved
+ */
+#define I82975X_DRA_CH0R01 0x108
+#define I82975X_DRA_CH0R23 0x109
+#define I82975X_DRA_CH1R01 0x188
+#define I82975X_DRA_CH1R23 0x189
+
+
+#define I82975X_BNKARC 0x10e /* Type of device in each rank - Bank Arch (16b)
+ *
+ * 15:8 reserved
+ * 7:6 Rank 3 architecture
+ * 5:4 Rank 2 architecture
+ * 3:2 Rank 1 architecture
+ * 1:0 Rank 0 architecture
+ *
+ * 00 => x16 devices; i.e 4 banks
+ * 01 => x8 devices; i.e 8 banks
+ */
+#define I82975X_C0BNKARC 0x10e
+#define I82975X_C1BNKARC 0x18e
+
+
+
+#define I82975X_DRC 0x120 /* DRAM Controller Mode0 (32b)
+ *
+ * 31:30 reserved
+ * 29 init complete
+ * 28:11 reserved, according to Intel
+ * 22:21 number of channels
+ * 00=1 01=2 in 82875
+ * seems to be ECC mode
+ * bits in 82975 in Asus
+ * P5W
+ * 19:18 Data Integ Mode
+ * 00=none 01=ECC in 82875
+ * 10:8 refresh mode
+ * 7 reserved
+ * 6:4 mode select
+ * 3:2 reserved
+ * 1:0 DRAM type 10=Second Revision
+ * DDR2 SDRAM
+ * 00, 01, 11 reserved
+ */
+#define I82975X_DRC_CH0M0 0x120
+#define I82975X_DRC_CH1M0 0x1A0
+
+
+#define I82975X_DRC_M1 0x124 /* DRAM Controller Mode1 (32b)
+ * 31 0=Standard Address Map
+ * 1=Enhanced Address Map
+ * 30:0 reserved
+ */
+
+#define I82975X_DRC_CH0M1 0x124
+#define I82975X_DRC_CH1M1 0x1A4
+
+enum i82975x_chips {
+ I82975X = 0,
+};
+
+struct i82975x_pvt {
+ void __iomem *mch_window;
+};
+
+struct i82975x_dev_info {
+ const char *ctl_name;
+};
+
+struct i82975x_error_info {
+ u16 errsts;
+ u32 eap;
+ u8 des;
+ u8 derrsyn;
+ u16 errsts2;
+ u8 chan; /* the channel is bit 0 of EAP */
+ u8 xeap; /* extended eap bit */
+};
+
+static const struct i82975x_dev_info i82975x_devs[] = {
+ [I82975X] = {
+ .ctl_name = "i82975x"
+ },
+};
+
+static struct pci_dev *mci_pdev; /* init dev: in case that AGP code has
+ * already registered driver
+ */
+
+static int i82975x_registered = 1;
+
+static void i82975x_get_error_info(struct mem_ctl_info *mci,
+ struct i82975x_error_info *info)
+{
+ struct pci_dev *pdev;
+
+ pdev = to_pci_dev(mci->dev);
+
+ /*
+ * This is a mess because there is no atomic way to read all the
+ * registers at once and the registers can transition from CE being
+ * overwritten by UE.
+ */
+ pci_read_config_word(pdev, I82975X_ERRSTS, &info->errsts);
+ pci_read_config_dword(pdev, I82975X_EAP, &info->eap);
+ pci_read_config_byte(pdev, I82975X_XEAP, &info->xeap);
+ pci_read_config_byte(pdev, I82975X_DES, &info->des);
+ pci_read_config_byte(pdev, I82975X_DERRSYN, &info->derrsyn);
+ pci_read_config_word(pdev, I82975X_ERRSTS, &info->errsts2);
+
+ pci_write_bits16(pdev, I82975X_ERRSTS, 0x0003, 0x0003);
+
+ /*
+ * If the error is the same then we can for both reads then
+ * the first set of reads is valid. If there is a change then
+ * there is a CE no info and the second set of reads is valid
+ * and should be UE info.
+ */
+ if (!(info->errsts2 & 0x0003))
+ return;
+
+ if ((info->errsts ^ info->errsts2) & 0x0003) {
+ pci_read_config_dword(pdev, I82975X_EAP, &info->eap);
+ pci_read_config_byte(pdev, I82975X_XEAP, &info->xeap);
+ pci_read_config_byte(pdev, I82975X_DES, &info->des);
+ pci_read_config_byte(pdev, I82975X_DERRSYN,
+ &info->derrsyn);
+ }
+}
+
+static int i82975x_process_error_info(struct mem_ctl_info *mci,
+ struct i82975x_error_info *info, int handle_errors)
+{
+ int row, multi_chan, chan;
+
+ multi_chan = mci->csrows[0].nr_channels - 1;
+
+ if (!(info->errsts2 & 0x0003))
+ return 0;
+
+ if (!handle_errors)
+ return 1;
+
+ if ((info->errsts ^ info->errsts2) & 0x0003) {
+ edac_mc_handle_ce_no_info(mci, "UE overwrote CE");
+ info->errsts = info->errsts2;
+ }
+
+ chan = info->eap & 1;
+ info->eap >>= 1;
+ if (info->xeap )
+ info->eap |= 0x80000000;
+ info->eap >>= PAGE_SHIFT;
+ row = edac_mc_find_csrow_by_page(mci, info->eap);
+
+ if (info->errsts & 0x0002)
+ edac_mc_handle_ue(mci, info->eap, 0, row, "i82975x UE");
+ else
+ edac_mc_handle_ce(mci, info->eap, 0, info->derrsyn, row,
+ multi_chan ? chan : 0,
+ "i82975x CE");
+
+ return 1;
+}
+
+static void i82975x_check(struct mem_ctl_info *mci)
+{
+ struct i82975x_error_info info;
+
+ debugf1("MC%d: %s()\n", mci->mc_idx, __func__);
+ i82975x_get_error_info(mci, &info);
+ i82975x_process_error_info(mci, &info, 1);
+}
+
+/* Return 1 if dual channel mode is active. Else return 0. */
+static int dual_channel_active(void __iomem *mch_window)
+{
+ /*
+ * We treat interleaved-symmetric configuration as dual-channel - EAP's
+ * bit-0 giving the channel of the error location.
+ *
+ * All other configurations are treated as single channel - the EAP's
+ * bit-0 will resolve ok in symmetric area of mixed
+ * (symmetric/asymmetric) configurations
+ */
+ u8 drb[4][2];
+ int row;
+ int dualch;
+
+ for (dualch = 1, row = 0; dualch && (row < 4); row++) {
+ drb[row][0] = readb(mch_window + I82975X_DRB + row);
+ drb[row][1] = readb(mch_window + I82975X_DRB + row + 0x80);
+ dualch = dualch && (drb[row][0] == drb[row][1]);
+ }
+ return dualch;
+}
+
+static enum dev_type i82975x_dram_type(void __iomem *mch_window, int rank)
+{
+ /*
+ * ASUS P5W DH either does not program this register or programs
+ * it wrong!
+ * ECC is possible on i92975x ONLY with DEV_X8 which should mean 'val'
+ * for each rank should be 01b - the LSB of the word should be 0x55;
+ * but it reads 0!
+ */
+ return DEV_X8;
+}
+
+static void i82975x_init_csrows(struct mem_ctl_info *mci,
+ struct pci_dev *pdev, void __iomem *mch_window)
+{
+ struct csrow_info *csrow;
+ unsigned long last_cumul_size;
+ u8 value;
+ u32 cumul_size;
+ int index;
+
+ last_cumul_size = 0;
+
+ /*
+ * 82875 comment:
+ * The dram row boundary (DRB) reg values are boundary address
+ * for each DRAM row with a granularity of 32 or 64MB (single/dual
+ * channel operation). DRB regs are cumulative; therefore DRB7 will
+ * contain the total memory contained in all eight rows.
+ *
+ * FIXME:
+ * EDAC currently works for Dual-channel Interleaved configuration.
+ * Other configurations, which the chip supports, need fixing/testing.
+ *
+ */
+
+ for (index = 0; index < mci->nr_csrows; index++) {
+ csrow = &mci->csrows[index];
+
+ value = readb(mch_window + I82975X_DRB + index +
+ ((index >= 4) ? 0x80 : 0));
+ cumul_size = value;
+ cumul_size <<= (I82975X_DRB_SHIFT - PAGE_SHIFT);
+ debugf3("%s(): (%d) cumul_size 0x%x\n", __func__, index,
+ cumul_size);
+ if (cumul_size == last_cumul_size)
+ continue; /* not populated */
+
+ csrow->first_page = last_cumul_size;
+ csrow->last_page = cumul_size - 1;
+ csrow->nr_pages = cumul_size - last_cumul_size;
+ last_cumul_size = cumul_size;
+ csrow->grain = 1 << 7; /* I82975X_EAP has 128B resolution */
+ csrow->mtype = MEM_DDR; /* i82975x supports only DDR2 */
+ csrow->dtype = i82975x_dram_type(mch_window, index);
+ csrow->edac_mode = EDAC_SECDED; /* only supported */
+ }
+}
+
+/* #define i82975x_DEBUG_IOMEM */
+
+#ifdef i82975x_DEBUG_IOMEM
+static void i82975x_print_dram_timings(void __iomem *mch_window)
+{
+ /*
+ * The register meanings are from Intel specs;
+ * (shows 13-5-5-5 for 800-DDR2)
+ * Asus P5W Bios reports 15-5-4-4
+ * What's your religion?
+ */
+ static const int caslats[4] = { 5, 4, 3, 6 };
+ u32 dtreg[2];
+
+ dtreg[0] = readl(mch_window + 0x114);
+ dtreg[1] = readl(mch_window + 0x194);
+ i82975x_printk(KERN_INFO, "DRAM Timings : Ch0 Ch1\n"
+ " RAS Active Min = %d %d\n"
+ " CAS latency = %d %d\n"
+ " RAS to CAS = %d %d\n"
+ " RAS precharge = %d %d\n",
+ (dtreg[0] >> 19 ) & 0x0f,
+ (dtreg[1] >> 19) & 0x0f,
+ caslats[(dtreg[0] >> 8) & 0x03],
+ caslats[(dtreg[1] >> 8) & 0x03],
+ ((dtreg[0] >> 4) & 0x07) + 2,
+ ((dtreg[1] >> 4) & 0x07) + 2,
+ (dtreg[0] & 0x07) + 2,
+ (dtreg[1] & 0x07) + 2
+ );
+
+}
+#endif
+
+static int i82975x_probe1(struct pci_dev *pdev, int dev_idx)
+{
+ int rc = -ENODEV;
+ struct mem_ctl_info *mci;
+ struct i82975x_pvt *pvt;
+ void __iomem *mch_window;
+ u32 mchbar;
+ u32 drc[2];
+ struct i82975x_error_info discard;
+ int chans;
+#ifdef i82975x_DEBUG_IOMEM
+ u8 c0drb[4];
+ u8 c1drb[4];
+#endif
+
+ debugf0("%s()\n", __func__);
+
+ pci_read_config_dword(pdev, I82975X_MCHBAR, &mchbar);
+ if (!(mchbar & 1)) {
+ debugf3("%s(): failed, MCHBAR disabled!\n", __func__);
+ goto fail0;
+ }
+ mchbar &= 0xffffc000; /* bits 31:14 used for 16K window */
+ mch_window = ioremap_nocache(mchbar, 0x1000);
+
+#ifdef i82975x_DEBUG_IOMEM
+ i82975x_printk(KERN_INFO, "MCHBAR real = %0x, remapped = %p\n",
+ mchbar, mch_window);
+
+ c0drb[0] = readb(mch_window + I82975X_DRB_CH0R0);
+ c0drb[1] = readb(mch_window + I82975X_DRB_CH0R1);
+ c0drb[2] = readb(mch_window + I82975X_DRB_CH0R2);
+ c0drb[3] = readb(mch_window + I82975X_DRB_CH0R3);
+ c1drb[0] = readb(mch_window + I82975X_DRB_CH1R0);
+ c1drb[1] = readb(mch_window + I82975X_DRB_CH1R1);
+ c1drb[2] = readb(mch_window + I82975X_DRB_CH1R2);
+ c1drb[3] = readb(mch_window + I82975X_DRB_CH1R3);
+ i82975x_printk(KERN_INFO, "DRBCH0R0 = 0x%02x\n", c0drb[0]);
+ i82975x_printk(KERN_INFO, "DRBCH0R1 = 0x%02x\n", c0drb[1]);
+ i82975x_printk(KERN_INFO, "DRBCH0R2 = 0x%02x\n", c0drb[2]);
+ i82975x_printk(KERN_INFO, "DRBCH0R3 = 0x%02x\n", c0drb[3]);
+ i82975x_printk(KERN_INFO, "DRBCH1R0 = 0x%02x\n", c1drb[0]);
+ i82975x_printk(KERN_INFO, "DRBCH1R1 = 0x%02x\n", c1drb[1]);
+ i82975x_printk(KERN_INFO, "DRBCH1R2 = 0x%02x\n", c1drb[2]);
+ i82975x_printk(KERN_INFO, "DRBCH1R3 = 0x%02x\n", c1drb[3]);
+#endif
+
+ drc[0] = readl(mch_window + I82975X_DRC_CH0M0);
+ drc[1] = readl(mch_window + I82975X_DRC_CH1M0);
+#ifdef i82975x_DEBUG_IOMEM
+ i82975x_printk(KERN_INFO, "DRC_CH0 = %0x, %s\n", drc[0],
+ ((drc[0] >> 21) & 3) == 1 ?
+ "ECC enabled" : "ECC disabled");
+ i82975x_printk(KERN_INFO, "DRC_CH1 = %0x, %s\n", drc[1],
+ ((drc[1] >> 21) & 3) == 1 ?
+ "ECC enabled" : "ECC disabled");
+
+ i82975x_printk(KERN_INFO, "C0 BNKARC = %0x\n",
+ readw(mch_window + I82975X_C0BNKARC));
+ i82975x_printk(KERN_INFO, "C1 BNKARC = %0x\n",
+ readw(mch_window + I82975X_C1BNKARC));
+ i82975x_print_dram_timings(mch_window);
+ goto fail1;
+#endif
+ if (!(((drc[0] >> 21) & 3) == 1 || ((drc[1] >> 21) & 3) == 1)) {
+ i82975x_printk(KERN_INFO, "ECC disabled on both channels.\n");
+ goto fail1;
+ }
+
+ chans = dual_channel_active(mch_window) + 1;
+
+ /* assuming only one controller, index thus is 0 */
+ mci = edac_mc_alloc(sizeof(*pvt), I82975X_NR_CSROWS(chans),
+ chans, 0);
+ if (!mci) {
+ rc = -ENOMEM;
+ goto fail1;
+ }
+
+ debugf3("%s(): init mci\n", __func__);
+ mci->dev = &pdev->dev;
+ mci->mtype_cap = MEM_FLAG_DDR;
+ mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
+ mci->edac_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
+ mci->mod_name = EDAC_MOD_STR;
+ mci->mod_ver = I82975X_REVISION;
+ mci->ctl_name = i82975x_devs[dev_idx].ctl_name;
+ mci->edac_check = i82975x_check;
+ mci->ctl_page_to_phys = NULL;
+ debugf3("%s(): init pvt\n", __func__);
+ pvt = (struct i82975x_pvt *) mci->pvt_info;
+ pvt->mch_window = mch_window;
+ i82975x_init_csrows(mci, pdev, mch_window);
+ i82975x_get_error_info(mci, &discard); /* clear counters */
+
+ /* finalize this instance of memory controller with edac core */
+ if (edac_mc_add_mc(mci)) {
+ debugf3("%s(): failed edac_mc_add_mc()\n", __func__);
+ goto fail2;
+ }
+
+ /* get this far and it's successful */
+ debugf3("%s(): success\n", __func__);
+ return 0;
+
+fail2:
+ edac_mc_free(mci);
+
+fail1:
+ iounmap(mch_window);
+fail0:
+ return rc;
+}
+
+/* returns count (>= 0), or negative on error */
+static int __devinit i82975x_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ int rc;
+
+ debugf0("%s()\n", __func__);
+
+ if (pci_enable_device(pdev) < 0)
+ return -EIO;
+
+ rc = i82975x_probe1(pdev, ent->driver_data);
+
+ if (mci_pdev == NULL)
+ mci_pdev = pci_dev_get(pdev);
+
+ return rc;
+}
+
+static void __devexit i82975x_remove_one(struct pci_dev *pdev)
+{
+ struct mem_ctl_info *mci;
+ struct i82975x_pvt *pvt;
+
+ debugf0("%s()\n", __func__);
+
+ mci = edac_mc_del_mc(&pdev->dev);
+ if (mci == NULL)
+ return;
+
+ pvt = mci->pvt_info;
+ if (pvt->mch_window)
+ iounmap( pvt->mch_window );
+
+ edac_mc_free(mci);
+}
+
+static const struct pci_device_id i82975x_pci_tbl[] __devinitdata = {
+ {
+ PCI_VEND_DEV(INTEL, 82975_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ I82975X
+ },
+ {
+ 0,
+ } /* 0 terminated list. */
+};
+
+MODULE_DEVICE_TABLE(pci, i82975x_pci_tbl);
+
+static struct pci_driver i82975x_driver = {
+ .name = EDAC_MOD_STR,
+ .probe = i82975x_init_one,
+ .remove = __devexit_p(i82975x_remove_one),
+ .id_table = i82975x_pci_tbl,
+};
+
+static int __init i82975x_init(void)
+{
+ int pci_rc;
+
+ debugf3("%s()\n", __func__);
+
+ pci_rc = pci_register_driver(&i82975x_driver);
+ if (pci_rc < 0)
+ goto fail0;
+
+ if (mci_pdev == NULL) {
+ mci_pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
+ PCI_DEVICE_ID_INTEL_82975_0, NULL);
+
+ if (!mci_pdev) {
+ debugf0("i82975x pci_get_device fail\n");
+ pci_rc = -ENODEV;
+ goto fail1;
+ }
+
+ pci_rc = i82975x_init_one(mci_pdev, i82975x_pci_tbl);
+
+ if (pci_rc < 0) {
+ debugf0("i82975x init fail\n");
+ pci_rc = -ENODEV;
+ goto fail1;
+ }
+ }
+
+ return 0;
+
+fail1:
+ pci_unregister_driver(&i82975x_driver);
+
+fail0:
+ if (mci_pdev != NULL)
+ pci_dev_put(mci_pdev);
+
+ return pci_rc;
+}
+
+static void __exit i82975x_exit(void)
+{
+ debugf3("%s()\n", __func__);
+
+ pci_unregister_driver(&i82975x_driver);
+
+ if (!i82975x_registered) {
+ i82975x_remove_one(mci_pdev);
+ pci_dev_put(mci_pdev);
+ }
+}
+
+module_init(i82975x_init);
+module_exit(i82975x_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Arvind R. <arvind@acarlab.com>");
+MODULE_DESCRIPTION("MC support for Intel 82975 memory hub controllers");
git.openpandora.org / pandora-kernel.git / commitdiff