* 'v4l_for_2.6.34' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6:
V4L/DVB: pxa_camera: move fifo reset direct before dma start
V4L/DVB: video: testing unsigned for less than 0
V4L/DVB: mx1-camera: compile fix
V4L/DVB: budget: Oops: "BUG: unable to handle kernel NULL pointer dereference"
V4L/DVB: ngene: Workaround for stuck DiSEqC pin
V4L/DVB: saa7146: fix regression of the av7110/budget-av driver
V4L/DVB: v4l: fix config dependencies: mxb and saa7191 are V4L2 drivers, not V4L1
V4L/DVB: feature-removal: announce videotext.h removal
V4L/DVB: V4L - vpfe capture - fix for kernel crash
V4L/DVB: gspca: make usb id 0461:0815 get handled by the right driver
V4L/DVB: gspca - stv06xx: Remove the 046d:08da from the stv06xx driver
V4L/DVB: gspca - sn9c20x: Correct onstack wait_queue_head declaration
V4L/DVB: saa7146: fix up bytesperline if it is an impossible value
V4L/DVB: V4L: vpfe_capture - free ccdc_lock when memory allocation fails
V4L/DVB: V4L - Makfile:Removed duplicate entry of davinci
V4L/DVB: omap24xxcam: potential buffer overflow
W(b) __armv4_mmu_cache_off
W(b) __armv4_mmu_cache_flush
- .word 0x56056930
- .word 0xff0ffff0 @ PXA935
+ .word 0x56056900
+ .word 0xffffff00 @ PXA9xx
W(b) __armv4_mmu_cache_on
W(b) __armv4_mmu_cache_off
W(b) __armv4_mmu_cache_flush
W(b) __armv4_mmu_cache_off
W(b) __armv5tej_mmu_cache_flush
- .word 0x56056930
- .word 0xff0ffff0 @ PXA935
- W(b) __armv4_mmu_cache_on
- W(b) __armv4_mmu_cache_off
- W(b) __armv4_mmu_cache_flush
-
.word 0x56050000 @ Feroceon
.word 0xff0f0000
W(b) __armv4_mmu_cache_on
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc8
-# Sat Feb 13 21:48:53 2010
+# Linux kernel version: 2.6.34-rc2
+# Thu Apr 8 14:49:08 2010
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_HAVE_PROC_CPU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_ARCH_HAS_CPUFREQ=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_MTD_XIP=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_BCMRING is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_STMP3XXX is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_NUC93X is not set
# CONFIG_ARCH_PNX4008 is not set
CONFIG_ARCH_PXA=y
# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_SHMOBILE is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P6440 is not set
+# CONFIG_ARCH_S5P6442 is not set
# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_S5PV210 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
#
# Intel PXA2xx/PXA3xx Implementations
# CONFIG_MACH_EM_X270 is not set
# CONFIG_MACH_EXEDA is not set
# CONFIG_MACH_CM_X300 is not set
+# CONFIG_MACH_CAPC7117 is not set
# CONFIG_ARCH_GUMSTIX is not set
CONFIG_MACH_INTELMOTE2=y
# CONFIG_MACH_STARGATE2 is not set
# CONFIG_PXA_EZX is not set
# CONFIG_MACH_MP900C is not set
# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_MACH_RAUMFELD_RC is not set
+# CONFIG_MACH_RAUMFELD_CONNECTOR is not set
+# CONFIG_MACH_RAUMFELD_SPEAKER is not set
# CONFIG_PXA_SHARPSL is not set
+# CONFIG_MACH_ICONTROL is not set
# CONFIG_ARCH_PXA_ESERIES is not set
CONFIG_PXA27x=y
CONFIG_PXA_SSP=y
CONFIG_ARM_L1_CACHE_SHIFT=5
CONFIG_IWMMXT=y
CONFIG_XSCALE_PMU=y
+CONFIG_CPU_HAS_PMU=y
CONFIG_COMMON_CLKDEV=y
#
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=tty1 root=/dev/mmcblk0p2 rootfstype=ext2 rootdelay=3 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug"
+CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=jffs2 console=ttyS2,115200 mem=32M"
# CONFIG_XIP_KERNEL is not set
CONFIG_KEXEC=y
CONFIG_ATAGS_PROC=y
#
# CPU Power Management
#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-CONFIG_CPU_FREQ_DEBUG=y
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
#
# Floating point emulation
CONFIG_SUSPEND_FREEZER=y
CONFIG_APM_EMULATION=y
CONFIG_PM_RUNTIME=y
+CONFIG_PM_OPS=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
# Networking options
#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_CT is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_LED=m
# CONFIG_ATM is not set
CONFIG_STP=m
CONFIG_BRIDGE=m
+# CONFIG_BRIDGE_IGMP_SNOOPING is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
-CONFIG_BT=y
-CONFIG_BT_L2CAP=y
-CONFIG_BT_SCO=y
-CONFIG_BT_RFCOMM=y
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=y
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=y
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIBTUSB=m
-CONFIG_BT_HCIBTSDIO=m
-CONFIG_BT_HCIUART=y
-CONFIG_BT_HCIUART_H4=y
-# CONFIG_BT_HCIUART_BCSP is not set
-# CONFIG_BT_HCIUART_LL is not set
-CONFIG_BT_HCIBCM203X=m
-CONFIG_BT_HCIBPA10X=m
-CONFIG_BT_HCIBFUSB=m
-CONFIG_BT_HCIVHCI=m
-CONFIG_BT_MRVL=m
-CONFIG_BT_MRVL_SDIO=m
-# CONFIG_BT_ATH3K is not set
+# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
# CONFIG_WIRELESS is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_AFS_PARTS=y
+CONFIG_MTD_AR7_PARTS=y
#
# User Modules And Translation Layers
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
CONFIG_SERIAL_PXA_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_I2C_PXA=y
# CONFIG_I2C_PXA_SLAVE is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
#
# Memory mapped GPIO expanders:
#
+# CONFIG_GPIO_IT8761E is not set
#
# I2C GPIO expanders:
#
+# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_TC6393XB is not set
CONFIG_PMIC_DA903X=y
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
-# CONFIG_MFD_88PM8607 is not set
# CONFIG_AB4500_CORE is not set
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
+# CONFIG_REGULATOR_DUMMY is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_MAX8649 is not set
# CONFIG_REGULATOR_MAX8660 is not set
CONFIG_REGULATOR_DA903X=y
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_VIDEO_SAA7191 is not set
# CONFIG_VIDEO_TVP514X is not set
# CONFIG_VIDEO_TVP5150 is not set
+# CONFIG_VIDEO_TVP7002 is not set
# CONFIG_VIDEO_VPX3220 is not set
#
CONFIG_VIDEO_PXA27x=y
# CONFIG_VIDEO_SH_MOBILE_CEU is not set
# CONFIG_V4L_USB_DRIVERS is not set
-CONFIG_RADIO_ADAPTERS=y
-# CONFIG_I2C_SI4713 is not set
-# CONFIG_RADIO_SI4713 is not set
-# CONFIG_USB_DSBR is not set
-# CONFIG_RADIO_SI470X is not set
-# CONFIG_USB_MR800 is not set
-CONFIG_RADIO_TEA5764=y
-CONFIG_RADIO_TEA5764_XTAL=y
-# CONFIG_RADIO_TEF6862 is not set
+# CONFIG_RADIO_ADAPTERS is not set
# CONFIG_DAB is not set
#
#
# Special HID drivers
#
-CONFIG_HID_APPLE=m
-# CONFIG_HID_WACOM is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_NOKIA is not set
# CONFIG_USB_G_MULTI is not set
#
#
CONFIG_MMC_PXA=y
# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
CONFIG_MMC_SPI=y
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
# CONFIG_LEDS_REGULATOR is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_LT3593 is not set
+CONFIG_LEDS_TRIGGERS=y
#
# LED Triggers
#
-CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_SA1100 is not set
-# CONFIG_RTC_DRV_PXA is not set
+CONFIG_RTC_DRV_PXA=y
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=m
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
+# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
-CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
+# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
#
# CD-ROM/DVD Filesystems
#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
+# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_FS_WBUF_VERIFY=y
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_FS_POSIX_ACL=y
+CONFIG_JFFS2_FS_SECURITY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_LZO=y
CONFIG_JFFS2_CMODE_PRIORITY=y
# CONFIG_JFFS2_CMODE_SIZE is not set
# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_LOGFS is not set
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
# CONFIG_SQUASHFS_EMBEDDED is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
# CONFIG_CIFS_STATS2 is not set
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
+# CONFIG_PROVE_RCU is not set
CONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_LOCKDEP is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_CRC7=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_LZO_COMPRESS=m
-CONFIG_LZO_DECOMPRESS=m
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#include <asm/ptrace.h>
#include <asm/user.h>
+struct task_struct;
+
typedef unsigned long elf_greg_t;
typedef unsigned long elf_freg_t[3];
* lr = unrecognised FP instruction return address
*/
- .data
+ .pushsection .data
ENTRY(fp_enter)
.word no_fp
- .text
+ .popsection
ENTRY(no_fp)
mov pc, lr
return PTR_ERR(idle);
}
ci->idle = idle;
+ } else {
+ /*
+ * Since this idle thread is being re-used, call
+ * init_idle() to reinitialize the thread structure.
+ */
+ init_idle(idle, cpu);
}
/*
#include <linux/io.h>
#include <asm/clkdev.h>
+#include <asm/div64.h>
#include <mach/hardware.h>
#include <mach/common.h>
#define _COLIBRI_H_
#include <net/ax88796.h>
+#include <mach/mfp.h>
/*
* common settings for all modules
#define __cpu_is_pxa950(id) \
({ \
unsigned int _id = (id) >> 4 & 0xfff; \
- id == 0x697; \
+ _id == 0x697; \
})
#else
#define __cpu_is_pxa950(id) (0)
#define U2DMACSR_BUSERRTYPE (7 << 10) /* PX Bus Error Type */
#define U2DMACSR_EORINTR (1 << 9) /* End Of Receive */
#define U2DMACSR_REQPEND (1 << 8) /* Request Pending */
-#define U2DMACSR_RASINTR (1 << 4) /* Request After Channel Stopped (read / write 1 clear) */#define U2DMACSR_STOPINTR (1 << 3) /* Stop Interrupt (read only) */
+#define U2DMACSR_RASINTR (1 << 4) /* Request After Channel Stopped (read / write 1 clear) */
+#define U2DMACSR_STOPINTR (1 << 3) /* Stop Interrupt (read only) */
#define U2DMACSR_ENDINTR (1 << 2) /* End Interrupt (read / write 1 clear) */
#define U2DMACSR_STARTINTR (1 << 1) /* Start Interrupt (read / write 1 clear) */
#define U2DMACSR_BUSERRINTR (1 << 0) /* Bus Error Interrupt (read / write 1 clear) */
int i;
for (i = 0; i < ARRAY_SIZE(gpio_keys_button); i++)
- if (!strcmp(gpio_keys_button[i].desc, "on/off button"))
+ if (!strcmp(gpio_keys_button[i].desc, "on_off button"))
gpio_keys_button[i].active_low = 1;
}
gpio_direction_output(GPIO_W2W_PDN, 0);
/* this can be used to switch off the device */
- ret = gpio_request(GPIO_SHUTDOWN_SUPPLY,
- "supply shutdown");
+ ret = gpio_request(GPIO_SHUTDOWN_SUPPLY, "supply shutdown");
if (ret < 0)
pr_warning("Unable to request GPIO_SHUTDOWN_SUPPLY\n");
else
.type = EV_PWR,
.code = KEY_SUSPEND,
.gpio = SPITZ_GPIO_ON_KEY,
- .desc = "On/Off",
+ .desc = "On Off",
.wakeup = 1,
},
/* Two buttons detecting the lid state */
#include <linux/pm.h>
#include <linux/sched.h>
#include <linux/gpio.h>
+#include <linux/jiffies.h>
#include <linux/i2c-gpio.h>
#include <linux/serial_8250.h>
#include <linux/smc91x.h>
.sda_pin = VIPER_RTC_I2C_SDA_GPIO,
.scl_pin = VIPER_RTC_I2C_SCL_GPIO,
.udelay = 10,
- .timeout = 100,
+ .timeout = HZ,
};
static struct platform_device i2c_bus_device = {
.sda_pin = VIPER_TPM_I2C_SDA_GPIO,
.scl_pin = VIPER_TPM_I2C_SCL_GPIO,
.udelay = 10,
- .timeout = 100,
+ .timeout = HZ,
};
char *errstr;
config SA1100_H3100
bool "Compaq iPAQ H3100"
select HTC_EGPIO
- select CPU_FREQ_SA1100
+ select CPU_FREQ_SA1110
help
Say Y here if you intend to run this kernel on the Compaq iPAQ
H3100 handheld computer. Information about this machine and the
config SA1100_H3600
bool "Compaq iPAQ H3600/H3700"
select HTC_EGPIO
- select CPU_FREQ_SA1100
+ select CPU_FREQ_SA1110
help
Say Y here if you intend to run this kernel on the Compaq iPAQ
H3600 handheld computer. Information about this machine and the
struct sdram_params *sdram;
const char *name = sdram_name;
+ if (!cpu_is_sa1110())
+ return -ENODEV;
+
if (!name[0]) {
if (machine_is_assabet())
name = "TC59SM716-CL3";
printk("Mem-info:\n");
show_free_areas();
for_each_online_node(node) {
- pg_data_t *n = NODE_DATA(node);
- struct page *map = pgdat_page_nr(n, 0) - n->node_start_pfn;
-
for_each_nodebank (i,mi,node) {
struct membank *bank = &mi->bank[i];
unsigned int pfn1, pfn2;
pfn1 = bank_pfn_start(bank);
pfn2 = bank_pfn_end(bank);
- page = map + pfn1;
- end = map + pfn2;
+ page = pfn_to_page(pfn1);
+ end = pfn_to_page(pfn2 - 1) + 1;
do {
total++;
reserved_pages = free_pages = 0;
for_each_online_node(node) {
- pg_data_t *n = NODE_DATA(node);
- struct page *map = pgdat_page_nr(n, 0) - n->node_start_pfn;
-
for_each_nodebank(i, &meminfo, node) {
struct membank *bank = &meminfo.bank[i];
unsigned int pfn1, pfn2;
pfn1 = bank_pfn_start(bank);
pfn2 = bank_pfn_end(bank);
- page = map + pfn1;
- end = map + pfn2;
+ page = pfn_to_page(pfn1);
+ end = pfn_to_page(pfn2 - 1) + 1;
do {
if (PageReserved(page))
dbgfs_chan = kmalloc(sizeof(*dbgfs_state) * num_dma_channels,
GFP_KERNEL);
- if (!dbgfs_state)
+ if (!dbgfs_chan)
goto err_alloc;
chandir = debugfs_create_dir("channels", dbgfs_root);
#
# http://www.arm.linux.org.uk/developer/machines/?action=new
#
-# Last update: Sat Mar 20 15:35:41 2010
+# Last update: Sat May 1 10:36:42 2010
#
# machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number
#
h6053 MACH_H6053 H6053 2762
smint01 MACH_SMINT01 SMINT01 2763
prtlvt2 MACH_PRTLVT2 PRTLVT2 2764
+ap420 MACH_AP420 AP420 2765
+htcshift MACH_HTCSHIFT HTCSHIFT 2766
+davinci_dm365_fc MACH_DAVINCI_DM365_FC DAVINCI_DM365_FC 2767
+msm8x55_surf MACH_MSM8X55_SURF MSM8X55_SURF 2768
+msm8x55_ffa MACH_MSM8X55_FFA MSM8X55_FFA 2769
+esl_vamana MACH_ESL_VAMANA ESL_VAMANA 2770
+sbc35 MACH_SBC35 SBC35 2771
+mpx6446 MACH_MPX6446 MPX6446 2772
+oreo_controller MACH_OREO_CONTROLLER OREO_CONTROLLER 2773
+kopin_models MACH_KOPIN_MODELS KOPIN_MODELS 2774
+ttc_vision2 MACH_TTC_VISION2 TTC_VISION2 2775
+cns3420vb MACH_CNS3420VB CNS3420VB 2776
+lpc2 MACH_LPC2 LPC2 2777
+olympus MACH_OLYMPUS OLYMPUS 2778
+vortex MACH_VORTEX VORTEX 2779
+s5pc200 MACH_S5PC200 S5PC200 2780
+ecucore_9263 MACH_ECUCORE_9263 ECUCORE_9263 2781
+smdkc200 MACH_SMDKC200 SMDKC200 2782
+emsiso_sx27 MACH_EMSISO_SX27 EMSISO_SX27 2783
+apx_som9g45_ek MACH_APX_SOM9G45_EK APX_SOM9G45_EK 2784
+songshan MACH_SONGSHAN SONGSHAN 2785
+tianshan MACH_TIANSHAN TIANSHAN 2786
+vpx500 MACH_VPX500 VPX500 2787
+am3517sam MACH_AM3517SAM AM3517SAM 2788
+skat91_sim508 MACH_SKAT91_SIM508 SKAT91_SIM508 2789
+skat91_s3e MACH_SKAT91_S3E SKAT91_S3E 2790
+omap4_panda MACH_OMAP4_PANDA OMAP4_PANDA 2791
+df7220 MACH_DF7220 DF7220 2792
+nemini MACH_NEMINI NEMINI 2793
+t8200 MACH_T8200 T8200 2794
+apf51 MACH_APF51 APF51 2795
+dr_rc_unit MACH_DR_RC_UNIT DR_RC_UNIT 2796
+bordeaux MACH_BORDEAUX BORDEAUX 2797
+catania_b MACH_CATANIA_B CATANIA_B 2798
+mx51_ocean MACH_MX51_OCEAN MX51_OCEAN 2799
+ti8168evm MACH_TI8168EVM TI8168EVM 2800
+neocoreomap MACH_NEOCOREOMAP NEOCOREOMAP 2801
+withings_wbp MACH_WITHINGS_WBP WITHINGS_WBP 2802
+dbps MACH_DBPS DBPS 2803
+sbc9261 MACH_SBC9261 SBC9261 2804
+pcbfp0001 MACH_PCBFP0001 PCBFP0001 2805
+speedy MACH_SPEEDY SPEEDY 2806
+chrysaor MACH_CHRYSAOR CHRYSAOR 2807
+tango MACH_TANGO TANGO 2808
+synology_dsx11 MACH_SYNOLOGY_DSX11 SYNOLOGY_DSX11 2809
+hanlin_v3ext MACH_HANLIN_V3EXT HANLIN_V3EXT 2810
+hanlin_v5 MACH_HANLIN_V5 HANLIN_V5 2811
+hanlin_v3plus MACH_HANLIN_V3PLUS HANLIN_V3PLUS 2812
+iriver_story MACH_IRIVER_STORY IRIVER_STORY 2813
+irex_iliad MACH_IREX_ILIAD IREX_ILIAD 2814
+irex_dr1000 MACH_IREX_DR1000 IREX_DR1000 2815
+teton_bga MACH_TETON_BGA TETON_BGA 2816
+snapper9g45 MACH_SNAPPER9G45 SNAPPER9G45 2817
+tam3517 MACH_TAM3517 TAM3517 2818
+pdc100 MACH_PDC100 PDC100 2819
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc6
-# Wed Feb 3 10:02:59 2010
+# Linux kernel version: 2.6.34-rc6
+# Thu May 6 11:22:14 2010
#
CONFIG_MICROBLAZE=y
# CONFIG_SWAP is not set
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-# CONFIG_PCI is not set
-CONFIG_NO_DMA=y
CONFIG_DTC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
+
+#
+# Bus Options
+#
+# CONFIG_PCI is not set
+# CONFIG_PCI_DOMAINS is not set
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
+CONFIG_OF_FLATTREE=y
CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MICREL_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
+# CONFIG_ETHOC is not set
# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
# CONFIG_KS8851_MLL is not set
CONFIG_XILINX_EMACLITE=y
CONFIG_SERIAL_UARTLITE_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
#
# Multifunction device drivers
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
CONFIG_CIFS=y
CONFIG_CIFS_STATS=y
CONFIG_CIFS_STATS2=y
# CONFIG_DEBUG_OBJECTS is not set
CONFIG_DEBUG_SLAB=y
# CONFIG_DEBUG_SLAB_LEAK is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_SPINLOCK=y
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_HEART_BEAT is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc6
-# Wed Feb 3 10:03:21 2010
+# Linux kernel version: 2.6.34-rc6
+# Thu May 6 11:25:12 2010
#
CONFIG_MICROBLAZE=y
# CONFIG_SWAP is not set
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-# CONFIG_PCI is not set
-CONFIG_NO_DMA=y
CONFIG_DTC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_MMAP_ALLOW_UNINITIALIZED is not set
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
#
# Advanced setup
#
+# CONFIG_ADVANCED_OPTIONS is not set
#
# Default settings for advanced configuration options are used
#
+CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0x90000000
+CONFIG_TASK_SIZE=0x80000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_BINFMT_SHARED_FLAT is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
+
+#
+# Bus Options
+#
+# CONFIG_PCI is not set
+# CONFIG_PCI_DOMAINS is not set
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
CONFIG_OF_DEVICE=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
+# CONFIG_ETHOC is not set
# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_XILINX_EMACLITE is not set
CONFIG_SERIAL_UARTLITE_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
#
# Multifunction device drivers
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_DEBUG_OBJECTS_WORK is not set
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_HEART_BEAT is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
#include <asm/registers.h>
-#define L1_CACHE_SHIFT 2
+#define L1_CACHE_SHIFT 5
/* word-granular cache in microblaze */
#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
#define MAX_DMA_ADDRESS (CONFIG_KERNEL_START + memory_size - 1)
#endif
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy (0)
+#endif
+
#endif /* _ASM_MICROBLAZE_DMA_H */
void die(const char *str, struct pt_regs *fp, long err);
void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr);
-#ifdef CONFIG_MMU
-void __bug(const char *file, int line, void *data);
-int bad_trap(int trap_num, struct pt_regs *regs);
-int debug_trap(struct pt_regs *regs);
-#endif /* CONFIG_MMU */
-
#if defined(CONFIG_KGDB)
void (*debugger)(struct pt_regs *regs);
int (*debugger_bpt)(struct pt_regs *regs);
#ifdef CONFIG_MMU
-#define mm_ptov(addr) ((void *)__phys_to_virt(addr))
-#define mm_vtop(addr) ((unsigned long)__virt_to_phys(addr))
#define phys_to_virt(addr) ((void *)__phys_to_virt(addr))
#define virt_to_phys(addr) ((unsigned long)__virt_to_phys(addr))
#define virt_to_bus(addr) ((unsigned long)__virt_to_phys(addr))
#ifndef __ASSEMBLY__
+/* MS be sure that SLAB allocates aligned objects */
+#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES
+
#define PAGE_UP(addr) (((addr)+((PAGE_SIZE)-1))&(~((PAGE_SIZE)-1)))
#define PAGE_DOWN(addr) ((addr)&(~((PAGE_SIZE)-1)))
#endif /* CONFIG_MMU */
-# ifndef CONFIG_MMU
-# define copy_page(to, from) memcpy((to), (from), PAGE_SIZE)
-# define get_user_page(vaddr) __get_free_page(GFP_KERNEL)
-# define free_user_page(page, addr) free_page(addr)
-# else /* CONFIG_MMU */
-extern void copy_page(void *to, void *from);
-# endif /* CONFIG_MMU */
-
+# define copy_page(to, from) memcpy((to), (from), PAGE_SIZE)
# define clear_page(pgaddr) memset((pgaddr), 0, PAGE_SIZE)
# define clear_user_page(pgaddr, vaddr, page) memset((pgaddr), 0, PAGE_SIZE)
#define HAVE_PCI_LEGACY 1
-/* pci_unmap_{page,single} is a nop so... */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
-#define pci_unmap_addr(PTR, ADDR_NAME) (0)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0)
-#define pci_unmap_len(PTR, LEN_NAME) (0)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0)
-
/* The PCI address space does equal the physical memory
* address space (no IOMMU). The IDE and SCSI device layers use
* this boolean for bounce buffer decisions.
#define pmd_alloc_one_fast(mm, address) ({ BUG(); ((pmd_t *)1); })
#define pmd_alloc_one(mm, address) ({ BUG(); ((pmd_t *)2); })
-static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
- unsigned long address)
-{
- pte_t *pte;
- extern void *early_get_page(void);
- if (mem_init_done) {
- pte = (pte_t *)__get_free_page(GFP_KERNEL |
- __GFP_REPEAT | __GFP_ZERO);
- } else {
- pte = (pte_t *)early_get_page();
- if (pte)
- clear_page(pte);
- }
- return pte;
-}
+extern pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr);
static inline struct page *pte_alloc_one(struct mm_struct *mm,
unsigned long address)
extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
-/*
- * When flushing the tlb entry for a page, we also need to flush the hash
- * table entry. flush_hash_page is assembler (for speed) in hashtable.S.
- */
-extern int flush_hash_page(unsigned context, unsigned long va, pte_t *ptep);
-
-/* Add an HPTE to the hash table */
-extern void add_hash_page(unsigned context, unsigned long va, pte_t *ptep);
-
/*
* Encode and decode a swap entry.
* Note that the bits we use in a PTE for representing a swap entry
#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) >> 2 })
#define __swp_entry_to_pte(x) ((pte_t) { (x).val << 2 })
-
-/* CONFIG_APUS */
-/* For virtual address to physical address conversion */
-extern void cache_clear(__u32 addr, int length);
-extern void cache_push(__u32 addr, int length);
-extern int mm_end_of_chunk(unsigned long addr, int len);
extern unsigned long iopa(unsigned long addr);
-/* extern unsigned long mm_ptov(unsigned long addr) \
- __attribute__ ((const)); TBD */
/* Values for nocacheflag and cmode */
/* These are not used by the APUS kernel_map, but prevents
#define IOMAP_NOCACHE_NONSER 2
#define IOMAP_NO_COPYBACK 3
-/*
- * Map some physical address range into the kernel address space.
- */
-extern unsigned long kernel_map(unsigned long paddr, unsigned long size,
- int nocacheflag, unsigned long *memavailp);
-
-/*
- * Set cache mode of (kernel space) address range.
- */
-extern void kernel_set_cachemode(unsigned long address, unsigned long size,
- unsigned int cmode);
-
/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
#define kern_addr_valid(addr) (1)
void do_page_fault(struct pt_regs *regs, unsigned long address,
unsigned long error_code);
-void __init io_block_mapping(unsigned long virt, phys_addr_t phys,
- unsigned int size, int flags);
-
-void __init adjust_total_lowmem(void);
void mapin_ram(void);
int map_page(unsigned long va, phys_addr_t pa, int flags);
extern unsigned long ioremap_bot, ioremap_base;
void *consistent_alloc(int gfp, size_t size, dma_addr_t *dma_handle);
-void consistent_free(void *vaddr);
+void consistent_free(size_t size, void *vaddr);
void consistent_sync(void *vaddr, size_t size, int direction);
void consistent_sync_page(struct page *page, unsigned long offset,
size_t size, int direction);
#include <linux/hardirq.h>
#include <linux/thread_info.h>
#include <linux/kbuild.h>
+#include <asm/cpuinfo.h>
int main(int argc, char *argv[])
{
}
-/* Helper macro for computing the limits of cache range loops */
+/* Helper macro for computing the limits of cache range loops
+ *
+ * End address can be unaligned which is OK for C implementation.
+ * ASM implementation align it in ASM macros
+ */
#define CACHE_LOOP_LIMITS(start, end, cache_line_length, cache_size) \
do { \
int align = ~(cache_line_length - 1); \
end = min(start + cache_size, end); \
start &= align; \
- end = ((end & align) + cache_line_length); \
} while (0);
/*
*/
#define CACHE_ALL_LOOP(cache_size, line_length, op) \
do { \
- unsigned int len = cache_size; \
+ unsigned int len = cache_size - line_length; \
int step = -line_length; \
- BUG_ON(step >= 0); \
+ WARN_ON(step >= 0); \
\
__asm__ __volatile__ (" 1: " #op " %0, r0; \
bgtid %0, 1b; \
: "memory"); \
} while (0);
-
-#define CACHE_ALL_LOOP2(cache_size, line_length, op) \
-do { \
- unsigned int len = cache_size; \
- int step = -line_length; \
- BUG_ON(step >= 0); \
- \
- __asm__ __volatile__ (" 1: " #op " r0, %0; \
- bgtid %0, 1b; \
- addk %0, %0, %1; \
- " : : "r" (len), "r" (step) \
- : "memory"); \
-} while (0);
-
-/* for wdc.flush/clear */
+/* Used for wdc.flush/clear which can use rB for offset which is not possible
+ * to use for simple wdc or wic.
+ *
+ * start address is cache aligned
+ * end address is not aligned, if end is aligned then I have to substract
+ * cacheline length because I can't flush/invalidate the next cacheline.
+ * If is not, I align it because I will flush/invalidate whole line.
+ */
#define CACHE_RANGE_LOOP_2(start, end, line_length, op) \
do { \
int step = -line_length; \
+ int align = ~(line_length - 1); \
+ end = ((end & align) == end) ? end - line_length : end & align; \
int count = end - start; \
- BUG_ON(count <= 0); \
+ WARN_ON(count < 0); \
\
__asm__ __volatile__ (" 1: " #op " %0, %1; \
bgtid %1, 1b; \
#define CACHE_RANGE_LOOP_1(start, end, line_length, op) \
do { \
int volatile temp; \
- BUG_ON(end - start <= 0); \
+ int align = ~(line_length - 1); \
+ end = ((end & align) == end) ? end - line_length : end & align; \
+ WARN_ON(end - start < 0); \
\
__asm__ __volatile__ (" 1: " #op " %1, r0; \
cmpu %0, %1, %2; \
#endif
}
-/* FIXME this is weird - should be only wdc but not work
- * MS: I am getting bus errors and other weird things */
+/* FIXME It is blindly invalidation as is expected
+ * but can't be called on noMMU in microblaze_cache_init below
+ *
+ * MS: noMMU kernel won't boot if simple wdc is used
+ * The reason should be that there are discared data which kernel needs
+ */
static void __invalidate_dcache_all_wb(void)
{
#ifndef ASM_LOOP
#endif
pr_debug("%s\n", __func__);
#ifdef ASM_LOOP
- CACHE_ALL_LOOP2(cpuinfo.dcache_size, cpuinfo.dcache_line_length,
- wdc.clear)
+ CACHE_ALL_LOOP(cpuinfo.dcache_size, cpuinfo.dcache_line_length,
+ wdc)
#else
for (i = 0; i < cpuinfo.dcache_size;
i += cpuinfo.dcache_line_length)
- __asm__ __volatile__ ("wdc.clear %0, r0;" \
+ __asm__ __volatile__ ("wdc %0, r0;" \
: : "r" (i));
#endif
}
#ifdef ASM_LOOP
CACHE_RANGE_LOOP_2(start, end, cpuinfo.dcache_line_length, wdc.clear);
#else
- for (i = start; i < end; i += cpuinfo.icache_line_length)
+ for (i = start; i < end; i += cpuinfo.dcache_line_length)
__asm__ __volatile__ ("wdc.clear %0, r0;" \
: : "r" (i));
#endif
#ifdef ASM_LOOP
CACHE_RANGE_LOOP_1(start, end, cpuinfo.dcache_line_length, wdc);
#else
- for (i = start; i < end; i += cpuinfo.icache_line_length)
+ for (i = start; i < end; i += cpuinfo.dcache_line_length)
__asm__ __volatile__ ("wdc %0, r0;" \
: : "r" (i));
#endif
#ifdef ASM_LOOP
CACHE_RANGE_LOOP_1(start, end, cpuinfo.dcache_line_length, wdc);
#else
- for (i = start; i < end; i += cpuinfo.icache_line_length)
+ for (i = start; i < end; i += cpuinfo.dcache_line_length)
__asm__ __volatile__ ("wdc %0, r0;" \
: : "r" (i));
#endif
#ifdef ASM_LOOP
CACHE_RANGE_LOOP_1(start, end, cpuinfo.dcache_line_length, wdc);
#else
- for (i = start; i < end; i += cpuinfo.icache_line_length)
+ for (i = start; i < end; i += cpuinfo.dcache_line_length)
__asm__ __volatile__ ("wdc %0, r0;" \
: : "r" (i));
#endif
#ifdef ASM_LOOP
CACHE_RANGE_LOOP_2(start, end, cpuinfo.dcache_line_length, wdc.flush);
#else
- for (i = start; i < end; i += cpuinfo.icache_line_length)
+ for (i = start; i < end; i += cpuinfo.dcache_line_length)
__asm__ __volatile__ ("wdc.flush %0, r0;" \
: : "r" (i));
#endif
}
}
}
- invalidate_dcache();
+/* FIXME Invalidation is done in U-BOOT
+ * WT cache: Data is already written to main memory
+ * WB cache: Discard data on noMMU which caused that kernel doesn't boot
+ */
+ /* invalidate_dcache(); */
enable_dcache();
invalidate_icache();
if (cpuinfo.use_icache)
count += seq_printf(m,
- "Icache:\t\t%ukB\n",
- cpuinfo.icache_size >> 10);
+ "Icache:\t\t%ukB\tline length:\t%dB\n",
+ cpuinfo.icache_size >> 10,
+ cpuinfo.icache_line_length);
else
count += seq_printf(m, "Icache:\t\tno\n");
if (cpuinfo.use_dcache) {
count += seq_printf(m,
- "Dcache:\t\t%ukB\n",
- cpuinfo.dcache_size >> 10);
+ "Dcache:\t\t%ukB\tline length:\t%dB\n",
+ cpuinfo.dcache_size >> 10,
+ cpuinfo.dcache_line_length);
if (cpuinfo.dcache_wb)
count += seq_printf(m, "\t\twrite-back\n");
else
void *vaddr, dma_addr_t dma_handle)
{
#ifdef NOT_COHERENT_CACHE
- consistent_free(vaddr);
+ consistent_free(size, vaddr);
#else
free_pages((unsigned long)vaddr, get_order(size));
#endif
}
printk(KERN_WARNING "Divide by zero exception " \
"in kernel mode.\n");
- die("Divide by exception", regs, SIGBUS);
+ die("Divide by zero exception", regs, SIGBUS);
break;
case MICROBLAZE_FPU_EXCEPTION:
pr_debug(KERN_WARNING "FPU exception\n");
* for more details.
*/
+#include <linux/init.h>
#include <linux/linkage.h>
#include <asm/thread_info.h>
#include <asm/page.h>
#endif /* CONFIG_MMU */
- .text
+ __HEAD
ENTRY(_start)
#if CONFIG_KERNEL_BASE_ADDR == 0
brai TOPHYS(real_start)
*/
#include <linux/init.h>
+#include <linux/ftrace.h>
#include <linux/kernel.h>
#include <linux/hardirq.h>
#include <linux/interrupt.h>
static u32 concurrent_irq;
-void do_IRQ(struct pt_regs *regs)
+void __irq_entry do_IRQ(struct pt_regs *regs)
{
unsigned int irq;
struct pt_regs *old_regs = set_irq_regs(regs);
nop
.size early_console_reg_tlb_alloc, . - early_console_reg_tlb_alloc
-
-/*
- * Copy a whole page (4096 bytes).
- */
-#define COPY_16_BYTES \
- lwi r7, r6, 0; \
- lwi r8, r6, 4; \
- lwi r9, r6, 8; \
- lwi r10, r6, 12; \
- swi r7, r5, 0; \
- swi r8, r5, 4; \
- swi r9, r5, 8; \
- swi r10, r5, 12
-
-
-/* FIXME DCACHE_LINE_BYTES (CONFIG_XILINX_MICROBLAZE0_DCACHE_LINE_LEN * 4)*/
-#define DCACHE_LINE_BYTES (4 * 4)
-
-.globl copy_page;
-.type copy_page, @function
-.align 4;
-copy_page:
- ori r11, r0, (PAGE_SIZE/DCACHE_LINE_BYTES) - 1
-_copy_page_loop:
- COPY_16_BYTES
-#if DCACHE_LINE_BYTES >= 32
- COPY_16_BYTES
-#endif
- addik r6, r6, DCACHE_LINE_BYTES
- addik r5, r5, DCACHE_LINE_BYTES
- bneid r11, _copy_page_loop
- addik r11, r11, -1
- rtsd r15, 8
- nop
-
- .size copy_page, . - copy_page
show_stack(NULL, NULL);
}
EXPORT_SYMBOL(dump_stack);
-
-#ifdef CONFIG_MMU
-void __bug(const char *file, int line, void *data)
-{
- if (data)
- printk(KERN_CRIT "kernel BUG at %s:%d (data = %p)!\n",
- file, line, data);
- else
- printk(KERN_CRIT "kernel BUG at %s:%d!\n", file, line);
-
- machine_halt();
-}
-
-int bad_trap(int trap_num, struct pt_regs *regs)
-{
- printk(KERN_CRIT
- "unimplemented trap %d called at 0x%08lx, pid %d!\n",
- trap_num, regs->pc, current->pid);
- return -ENOSYS;
-}
-
-int debug_trap(struct pt_regs *regs)
-{
- int i;
- printk(KERN_CRIT "debug trap\n");
- for (i = 0; i < 32; i++) {
- /* printk("r%i:%08X\t",i,regs->gpr[i]); */
- if ((i % 4) == 3)
- printk(KERN_CRIT "\n");
- }
- printk(KERN_CRIT "pc:%08lX\tmsr:%08lX\n", regs->pc, regs->msr);
- return -ENOSYS;
-}
-#endif
.text : AT(ADDR(.text) - LOAD_OFFSET) {
_text = . ;
_stext = . ;
- *(.text .text.*)
+ HEAD_TEXT
+ TEXT_TEXT
*(.fixup)
EXIT_TEXT
EXIT_CALL
#include <linux/uaccess.h>
#include <asm/pgtable.h>
#include <asm/cpuinfo.h>
+#include <asm/tlbflush.h>
#ifndef CONFIG_MMU
-
/* I have to use dcache values because I can't relate on ram size */
-#define UNCACHED_SHADOW_MASK (cpuinfo.dcache_high - cpuinfo.dcache_base + 1)
+# define UNCACHED_SHADOW_MASK (cpuinfo.dcache_high - cpuinfo.dcache_base + 1)
+#endif
/*
* Consistent memory allocators. Used for DMA devices that want to
*/
void *consistent_alloc(int gfp, size_t size, dma_addr_t *dma_handle)
{
- struct page *page, *end, *free;
- unsigned long order;
- void *ret, *virt;
-
- if (in_interrupt())
- BUG();
-
- size = PAGE_ALIGN(size);
- order = get_order(size);
-
- page = alloc_pages(gfp, order);
- if (!page)
- goto no_page;
-
- /* We could do with a page_to_phys and page_to_bus here. */
- virt = page_address(page);
- ret = ioremap(virt_to_phys(virt), size);
- if (!ret)
- goto no_remap;
-
- /*
- * Here's the magic! Note if the uncached shadow is not implemented,
- * it's up to the calling code to also test that condition and make
- * other arranegments, such as manually flushing the cache and so on.
- */
-#ifdef CONFIG_XILINX_UNCACHED_SHADOW
- ret = (void *)((unsigned) ret | UNCACHED_SHADOW_MASK);
-#endif
- /* dma_handle is same as physical (shadowed) address */
- *dma_handle = (dma_addr_t)ret;
-
- /*
- * free wasted pages. We skip the first page since we know
- * that it will have count = 1 and won't require freeing.
- * We also mark the pages in use as reserved so that
- * remap_page_range works.
- */
- page = virt_to_page(virt);
- free = page + (size >> PAGE_SHIFT);
- end = page + (1 << order);
-
- for (; page < end; page++) {
- init_page_count(page);
- if (page >= free)
- __free_page(page);
- else
- SetPageReserved(page);
- }
-
- return ret;
-no_remap:
- __free_pages(page, order);
-no_page:
- return NULL;
-}
-
-#else
+ unsigned long order, vaddr;
+ void *ret;
+ unsigned int i, err = 0;
+ struct page *page, *end;
-void *consistent_alloc(int gfp, size_t size, dma_addr_t *dma_handle)
-{
- int order, err, i;
- unsigned long page, va, flags;
+#ifdef CONFIG_MMU
phys_addr_t pa;
struct vm_struct *area;
- void *ret;
+ unsigned long va;
+#endif
if (in_interrupt())
BUG();
size = PAGE_ALIGN(size);
order = get_order(size);
- page = __get_free_pages(gfp, order);
- if (!page) {
- BUG();
+ vaddr = __get_free_pages(gfp, order);
+ if (!vaddr)
return NULL;
- }
/*
* we need to ensure that there are no cachelines in use,
* or worse dirty in this area.
*/
- flush_dcache_range(virt_to_phys(page), virt_to_phys(page) + size);
+ flush_dcache_range(virt_to_phys((void *)vaddr),
+ virt_to_phys((void *)vaddr) + size);
+#ifndef CONFIG_MMU
+ ret = (void *)vaddr;
+ /*
+ * Here's the magic! Note if the uncached shadow is not implemented,
+ * it's up to the calling code to also test that condition and make
+ * other arranegments, such as manually flushing the cache and so on.
+ */
+# ifdef CONFIG_XILINX_UNCACHED_SHADOW
+ ret = (void *)((unsigned) ret | UNCACHED_SHADOW_MASK);
+# endif
+ if ((unsigned int)ret > cpuinfo.dcache_base &&
+ (unsigned int)ret < cpuinfo.dcache_high)
+ printk(KERN_WARNING
+ "ERROR: Your cache coherent area is CACHED!!!\n");
+
+ /* dma_handle is same as physical (shadowed) address */
+ *dma_handle = (dma_addr_t)ret;
+#else
/* Allocate some common virtual space to map the new pages. */
area = get_vm_area(size, VM_ALLOC);
- if (area == NULL) {
- free_pages(page, order);
+ if (!area) {
+ free_pages(vaddr, order);
return NULL;
}
va = (unsigned long) area->addr;
ret = (void *)va;
/* This gives us the real physical address of the first page. */
- *dma_handle = pa = virt_to_bus((void *)page);
-
- /* MS: This is the whole magic - use cache inhibit pages */
- flags = _PAGE_KERNEL | _PAGE_NO_CACHE;
+ *dma_handle = pa = virt_to_bus((void *)vaddr);
+#endif
/*
- * Set refcount=1 on all pages in an order>0
- * allocation so that vfree() will actually
- * free all pages that were allocated.
+ * free wasted pages. We skip the first page since we know
+ * that it will have count = 1 and won't require freeing.
+ * We also mark the pages in use as reserved so that
+ * remap_page_range works.
*/
- if (order > 0) {
- struct page *rpage = virt_to_page(page);
- for (i = 1; i < (1 << order); i++)
- init_page_count(rpage+i);
+ page = virt_to_page(vaddr);
+ end = page + (1 << order);
+
+ split_page(page, order);
+
+ for (i = 0; i < size && err == 0; i += PAGE_SIZE) {
+#ifdef CONFIG_MMU
+ /* MS: This is the whole magic - use cache inhibit pages */
+ err = map_page(va + i, pa + i, _PAGE_KERNEL | _PAGE_NO_CACHE);
+#endif
+
+ SetPageReserved(page);
+ page++;
}
- err = 0;
- for (i = 0; i < size && err == 0; i += PAGE_SIZE)
- err = map_page(va+i, pa+i, flags);
+ /* Free the otherwise unused pages. */
+ while (page < end) {
+ __free_page(page);
+ page++;
+ }
if (err) {
- vfree((void *)va);
+ free_pages(vaddr, order);
return NULL;
}
return ret;
}
-#endif /* CONFIG_MMU */
EXPORT_SYMBOL(consistent_alloc);
/*
* free page(s) as defined by the above mapping.
*/
-void consistent_free(void *vaddr)
+void consistent_free(size_t size, void *vaddr)
{
+ struct page *page;
+
if (in_interrupt())
BUG();
+ size = PAGE_ALIGN(size);
+
+#ifndef CONFIG_MMU
/* Clear SHADOW_MASK bit in address, and free as per usual */
-#ifdef CONFIG_XILINX_UNCACHED_SHADOW
+# ifdef CONFIG_XILINX_UNCACHED_SHADOW
vaddr = (void *)((unsigned)vaddr & ~UNCACHED_SHADOW_MASK);
+# endif
+ page = virt_to_page(vaddr);
+
+ do {
+ ClearPageReserved(page);
+ __free_page(page);
+ page++;
+ } while (size -= PAGE_SIZE);
+#else
+ do {
+ pte_t *ptep;
+ unsigned long pfn;
+
+ ptep = pte_offset_kernel(pmd_offset(pgd_offset_k(
+ (unsigned int)vaddr),
+ (unsigned int)vaddr),
+ (unsigned int)vaddr);
+ if (!pte_none(*ptep) && pte_present(*ptep)) {
+ pfn = pte_pfn(*ptep);
+ pte_clear(&init_mm, (unsigned int)vaddr, ptep);
+ if (pfn_valid(pfn)) {
+ page = pfn_to_page(pfn);
+
+ ClearPageReserved(page);
+ __free_page(page);
+ }
+ }
+ vaddr += PAGE_SIZE;
+ } while (size -= PAGE_SIZE);
+
+ /* flush tlb */
+ flush_tlb_all();
#endif
- vfree(vaddr);
}
EXPORT_SYMBOL(consistent_free);
case PCI_DMA_NONE:
BUG();
case PCI_DMA_FROMDEVICE: /* invalidate only */
- flush_dcache_range(start, end);
+ invalidate_dcache_range(start, end);
break;
case PCI_DMA_TODEVICE: /* writeback only */
flush_dcache_range(start, end);
* us unable to handle the page fault gracefully.
*/
out_of_memory:
- if (current->pid == 1) {
- yield();
- down_read(&mm->mmap_sem);
- goto survive;
- }
up_read(&mm->mmap_sem);
- printk(KERN_WARNING "VM: killing process %s\n", current->comm);
- if (user_mode(regs))
- do_exit(SIGKILL);
- bad_page_fault(regs, address, SIGKILL);
+ if (!user_mode(regs))
+ bad_page_fault(regs, address, SIGKILL);
+ else
+ pagefault_out_of_memory();
return;
do_sigbus:
return err;
}
-void __init adjust_total_lowmem(void)
-{
-/* TBD */
-#if 0
- unsigned long max_low_mem = MAX_LOW_MEM;
-
- if (total_lowmem > max_low_mem) {
- total_lowmem = max_low_mem;
-#ifndef CONFIG_HIGHMEM
- printk(KERN_INFO "Warning, memory limited to %ld Mb, use "
- "CONFIG_HIGHMEM to reach %ld Mb\n",
- max_low_mem >> 20, total_memory >> 20);
- total_memory = total_lowmem;
-#endif /* CONFIG_HIGHMEM */
- }
-#endif
-}
-
/*
* Map in all of physical memory starting at CONFIG_KERNEL_START.
*/
/* is x a power of 2? */
#define is_power_of_2(x) ((x) != 0 && (((x) & ((x) - 1)) == 0))
-/*
- * Set up a mapping for a block of I/O.
- * virt, phys, size must all be page-aligned.
- * This should only be called before ioremap is called.
- */
-void __init io_block_mapping(unsigned long virt, phys_addr_t phys,
- unsigned int size, int flags)
-{
- int i;
-
- if (virt > CONFIG_KERNEL_START && virt < ioremap_bot)
- ioremap_bot = ioremap_base = virt;
-
- /* Put it in the page tables. */
- for (i = 0; i < size; i += PAGE_SIZE)
- map_page(virt + i, phys + i, flags);
-}
-
/* Scan the real Linux page tables and return a PTE pointer for
* a virtual address in a context.
* Returns true (1) if PTE was found, zero otherwise. The pointer to
return pa;
}
+
+__init_refok pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
+ unsigned long address)
+{
+ pte_t *pte;
+ if (mem_init_done) {
+ pte = (pte_t *)__get_free_page(GFP_KERNEL |
+ __GFP_REPEAT | __GFP_ZERO);
+ } else {
+ pte = (pte_t *)early_get_page();
+ if (pte)
+ clear_page(pte);
+ }
+ return pte;
+}
struct pci_dev *dev = bus->self;
- for (i = 0; i < PCI_BUS_NUM_RESOURCES; ++i) {
+ pci_bus_for_each_resource(bus, res, i) {
res = bus->resource[i];
if (!res)
continue;
* but we want to try to avoid allocating at 0x2900-0x2bff
* which might have be mirrored at 0x0100-0x03ff..
*/
-void pcibios_align_resource(void *data, struct resource *res,
+resource_size_t pcibios_align_resource(void *data, const struct resource *res,
resource_size_t size, resource_size_t align)
{
struct pci_dev *dev = data;
+ resource_size_t start = res->start;
if (res->flags & IORESOURCE_IO) {
- resource_size_t start = res->start;
-
if (skip_isa_ioresource_align(dev))
- return;
- if (start & 0x300) {
+ return start;
+ if (start & 0x300)
start = (start + 0x3ff) & ~0x3ff;
- res->start = start;
- }
}
+
+ return start;
}
EXPORT_SYMBOL(pcibios_align_resource);
pr_debug("PCI: Allocating bus resources for %04x:%02x...\n",
pci_domain_nr(bus), bus->number);
- for (i = 0; i < PCI_BUS_NUM_RESOURCES; ++i) {
+ pci_bus_for_each_resource(bus, res, i) {
res = bus->resource[i];
if (!res || !res->flags
|| res->start > res->end || res->parent)
#
# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=1
+CONFIG_SERIAL_SH_SCI_NR_UARTS=2
CONFIG_SERIAL_SH_SCI_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
#
# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=1
+CONFIG_SERIAL_SH_SCI_NR_UARTS=2
CONFIG_SERIAL_SH_SCI_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
#include <linux/io.h>
#include "pci-sh4.h"
#include <asm/addrspace.h>
+#include <asm/sizes.h>
static int __init __area_sdram_check(struct pci_channel *chan,
unsigned int area)
static struct resource sh7751_pci_resources[] = {
{
.name = "SH7751_IO",
- .start = SH7751_PCI_IO_BASE,
- .end = SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1,
+ .start = 0x1000,
+ .end = SZ_4M - 1,
.flags = IORESOURCE_IO
}, {
.name = "SH7751_mem",
}
#define TS_INDEX2VAL(i) ((((i) & 3) << CHCR_TS_LOW_SHIFT) | \
- ((((i) >> 2) & 3) << CHCR_TS_HIGH_SHIFT))
+ (((i) & 0xc) << CHCR_TS_HIGH_SHIFT))
#else /* CONFIG_CPU_SH4A */
struct sh_dmae_chan *sh_chan = to_sh_chan(chan);
struct sh_desc *desc;
struct sh_dmae_slave *param = chan->private;
+ int ret;
pm_runtime_get_sync(sh_chan->dev);
struct sh_dmae_slave_config *cfg;
cfg = sh_dmae_find_slave(sh_chan, param->slave_id);
- if (!cfg)
- return -EINVAL;
+ if (!cfg) {
+ ret = -EINVAL;
+ goto efindslave;
+ }
- if (test_and_set_bit(param->slave_id, sh_dmae_slave_used))
- return -EBUSY;
+ if (test_and_set_bit(param->slave_id, sh_dmae_slave_used)) {
+ ret = -EBUSY;
+ goto etestused;
+ }
param->config = cfg;
}
spin_unlock_bh(&sh_chan->desc_lock);
- if (!sh_chan->descs_allocated)
- pm_runtime_put(sh_chan->dev);
+ if (!sh_chan->descs_allocated) {
+ ret = -ENOMEM;
+ goto edescalloc;
+ }
return sh_chan->descs_allocated;
+
+edescalloc:
+ if (param)
+ clear_bit(param->slave_id, sh_dmae_slave_used);
+etestused:
+efindslave:
+ pm_runtime_put(sh_chan->dev);
+ return ret;
}
/*
* 1) Enable Runtime PM
* 2) Force Runtime PM Resume since hardware is accessed from probe()
*/
+ priv->dev = &pdev->dev;
pm_runtime_enable(priv->dev);
pm_runtime_resume(priv->dev);
return 0;
if (!pdev->dev.platform_data) {
dev_err(&pdev->dev, "no platform data defined\n");
- error = -EINVAL;
- goto err0;
+ return -EINVAL;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
i = platform_get_irq(pdev, 0);
if (!res || i < 0) {
dev_err(&pdev->dev, "cannot get platform resources\n");
- error = -ENOENT;
- goto err0;
+ return -ENOENT;
}
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
if (!priv) {
dev_err(&pdev->dev, "cannot allocate device data\n");
- error = -ENOMEM;
- goto err0;
+ return -ENOMEM;
}
+ platform_set_drvdata(pdev, priv);
+
error = request_irq(i, sh_mobile_lcdc_irq, IRQF_DISABLED,
dev_name(&pdev->dev), priv);
if (error) {
}
priv->irq = i;
- priv->dev = &pdev->dev;
- platform_set_drvdata(pdev, priv);
pdata = pdev->dev.platform_data;
j = 0;
info = ch->info;
if (info->fbdefio) {
- priv->ch->sglist = vmalloc(sizeof(struct scatterlist) *
+ ch->sglist = vmalloc(sizeof(struct scatterlist) *
info->fix.smem_len >> PAGE_SHIFT);
- if (!priv->ch->sglist) {
+ if (!ch->sglist) {
dev_err(&pdev->dev, "cannot allocate sglist\n");
goto err1;
}
}
return 0;
- err1:
+err1:
sh_mobile_lcdc_remove(pdev);
- err0:
+
return error;
}
int i;
for (i = 0; i < ARRAY_SIZE(priv->ch); i++)
- if (priv->ch[i].info->dev)
+ if (priv->ch[i].info && priv->ch[i].info->dev)
unregister_framebuffer(priv->ch[i].info);
sh_mobile_lcdc_stop(priv);
if (priv->dot_clk)
clk_put(priv->dot_clk);
- pm_runtime_disable(priv->dev);
+ if (priv->dev)
+ pm_runtime_disable(priv->dev);
if (priv->base)
iounmap(priv->base);
{
return rcu_dereference_check(task->cgroups->subsys[subsys_id],
rcu_read_lock_held() ||
+ lockdep_is_held(&task->alloc_lock) ||
cgroup_lock_is_held());
}
#ifdef CONFIG_PROVE_RCU
+extern int rcu_my_thread_group_empty(void);
+
/**
* rcu_dereference_check - rcu_dereference with debug checking
* @p: The pointer to read, prior to dereferencing
int cgroup_path(const struct cgroup *cgrp, char *buf, int buflen)
{
char *start;
- struct dentry *dentry = rcu_dereference(cgrp->dentry);
+ struct dentry *dentry = rcu_dereference_check(cgrp->dentry,
+ rcu_read_lock_held() ||
+ cgroup_lock_is_held());
if (!dentry || cgrp == dummytop) {
/*
*--start = '\0';
for (;;) {
int len = dentry->d_name.len;
+
if ((start -= len) < buf)
return -ENAMETOOLONG;
- memcpy(start, cgrp->dentry->d_name.name, len);
+ memcpy(start, dentry->d_name.name, len);
cgrp = cgrp->parent;
if (!cgrp)
break;
- dentry = rcu_dereference(cgrp->dentry);
+
+ dentry = rcu_dereference_check(cgrp->dentry,
+ rcu_read_lock_held() ||
+ cgroup_lock_is_held());
if (!cgrp->parent)
continue;
if (--start < buf)
{
int subsys_id, i, depth = 0;
struct cgroup_subsys_state *parent_css, *child_css;
- struct css_id *child_id, *parent_id = NULL;
+ struct css_id *child_id, *parent_id;
subsys_id = ss->subsys_id;
parent_css = parent->subsys[subsys_id];
child_css = child->subsys[subsys_id];
- depth = css_depth(parent_css) + 1;
parent_id = parent_css->id;
+ depth = parent_id->depth;
child_id = get_new_cssid(ss, depth);
if (IS_ERR(child_id))
rcu = container_of(head, struct rcu_synchronize, head);
complete(&rcu->completion);
}
+
+#ifdef CONFIG_PROVE_RCU
+/*
+ * wrapper function to avoid #include problems.
+ */
+int rcu_my_thread_group_empty(void)
+{
+ return thread_group_empty(current);
+}
+EXPORT_SYMBOL_GPL(rcu_my_thread_group_empty);
+#endif /* #ifdef CONFIG_PROVE_RCU */
{
char path[64];
+ rcu_read_lock();
cgroup_path(task_group(p)->css.cgroup, path, sizeof(path));
+ rcu_read_unlock();
SEQ_printf(m, " %s", path);
}
#endif
* enabled in "curr" and "curr" is a child of "mem" in *cgroup*
* hierarchy(even if use_hierarchy is disabled in "mem").
*/
+ rcu_read_lock();
if (mem->use_hierarchy)
ret = css_is_ancestor(&curr->css, &mem->css);
else
ret = (curr == mem);
+ rcu_read_unlock();
css_put(&curr->css);
return ret;
}
/* record memcg information */
if (do_swap_account && swapout && memcg) {
+ rcu_read_lock();
swap_cgroup_record(ent, css_id(&memcg->css));
+ rcu_read_unlock();
mem_cgroup_get(memcg);
}
if (swapout && memcg)
{
unsigned short old_id, new_id;
+ rcu_read_lock();
old_id = css_id(&from->css);
new_id = css_id(&to->css);
+ rcu_read_unlock();
if (swap_cgroup_cmpxchg(entry, old_id, new_id) == old_id) {
mem_cgroup_swap_statistics(from, false);
put_page(page);
}
/* throught */
- if (ent.val && do_swap_account && !ret &&
- css_id(&mc.from->css) == lookup_swap_cgroup(ent)) {
- ret = MC_TARGET_SWAP;
- if (target)
- target->ent = ent;
+ if (ent.val && do_swap_account && !ret) {
+ unsigned short id;
+ rcu_read_lock();
+ id = css_id(&mc.from->css);
+ rcu_read_unlock();
+ if (id == lookup_swap_cgroup(ent)) {
+ ret = MC_TARGET_SWAP;
+ if (target)
+ target->ent = ent;
+ }
}
return ret;
}
git.openpandora.org / pandora-kernel.git / commitdiff