pch_uart: Add eg20t_port lock field, avoid recursive spinlocks

commit 2588aba002d14e938c2f56d299ecf3e7ce1302a5 upstream.

pch_uart_interrupt() takes priv->port.lock which leads to two recursive
spinlock calls if low_latency==1 or CONFIG_PREEMPT_RT_FULL=y (one
otherwise):

pch_uart_interrupt
  spin_lock_irqsave(priv->port.lock, flags)
  case PCH_UART_IID_RDR_TO (data ready)
  handle_rx_to
    push_rx
      tty_port_tty_get
        spin_lock_irqsave(&port->lock, flags) <--- already hold this lock
        ...
      tty_flip_buffer_push
        ...
        flush_to_ldisc
          spin_lock_irqsave(&tty->buf.lock)
            spin_lock_irqsave(&tty->buf.lock)
            disc->ops->receive_buf(tty, char_buf)
              n_tty_receive_buf
                tty->ops->flush_chars()
                uart_flush_chars
                  uart_start
                    spin_lock_irqsave(&port->lock) <--- already hold this lock

Avoid this by using a dedicated lock to protect the eg20t_port structure
and IO access to its membase. This is more consistent with the 8250
driver.  Ensure priv->lock is always take prior to priv->port.lock when
taken at the same time.

V2: Remove inadvertent whitespace change.
V3: Account for oops_in_progress for the private lock in
    pch_console_write().

Note: Like the 8250 driver, if a printk is introduced anywhere inside
      the pch_console_write() critical section, the kernel will hang
      on a recursive spinlock on the private lock. The oops case is
      handled by using a trylock in the oops_in_progress case.

Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Tomoya MORINAGA <tomoya.rohm@gmail.com>
CC: Feng Tang <feng.tang@intel.com>
CC: Alexander Stein <alexander.stein@systec-electronic.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2:
 - Adjust context
 - Drop changes to pch_console_write()]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index 08b92a6..8d70fbc 100644 (file)
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -236,6 +236,9 @@ struct eg20t_port {
        int                             tx_dma_use;
        void                            *rx_buf_virt;
        dma_addr_t                      rx_buf_dma;
+
+       /* protect the eg20t_port private structure and io access to membase */
+       spinlock_t lock;
 };
 
 /**
@@ -964,7 +967,7 @@ static irqreturn_t pch_uart_interrupt(int irq, void *dev_id)
        unsigned int iid;
        unsigned long flags;
 
-       spin_lock_irqsave(&priv->port.lock, flags);
+       spin_lock_irqsave(&priv->lock, flags);
        handled = 0;
        while ((iid = pch_uart_hal_get_iid(priv)) > 1) {
                switch (iid) {
@@ -1017,7 +1020,7 @@ static irqreturn_t pch_uart_interrupt(int irq, void *dev_id)
                        priv->int_dis_flag = 0;
        }
 
-       spin_unlock_irqrestore(&priv->port.lock, flags);
+       spin_unlock_irqrestore(&priv->lock, flags);
        return IRQ_RETVAL(handled);
 }
 
@@ -1131,9 +1134,9 @@ static void pch_uart_break_ctl(struct uart_port *port, int ctl)
        unsigned long flags;
 
        priv = container_of(port, struct eg20t_port, port);
-       spin_lock_irqsave(&port->lock, flags);
+       spin_lock_irqsave(&priv->lock, flags);
        pch_uart_hal_set_break(priv, ctl);
-       spin_unlock_irqrestore(&port->lock, flags);
+       spin_unlock_irqrestore(&priv->lock, flags);
 }
 
 /* Grab any interrupt resources and initialise any low level driver state. */
@@ -1284,7 +1287,8 @@ static void pch_uart_set_termios(struct uart_port *port,
 
        baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
 
-       spin_lock_irqsave(&port->lock, flags);
+       spin_lock_irqsave(&priv->lock, flags);
+       spin_lock(&port->lock);
 
        uart_update_timeout(port, termios->c_cflag, baud);
        rtn = pch_uart_hal_set_line(priv, baud, parity, bits, stb);
@@ -1297,7 +1301,8 @@ static void pch_uart_set_termios(struct uart_port *port,
                tty_termios_encode_baud_rate(termios, baud, baud);
 
 out:
-       spin_unlock_irqrestore(&port->lock, flags);
+       spin_unlock(&port->lock);
+       spin_unlock_irqrestore(&priv->lock, flags);
 }
 
 static const char *pch_uart_type(struct uart_port *port)
@@ -1449,6 +1454,8 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
        pci_enable_msi(pdev);
        pci_set_master(pdev);
 
+       spin_lock_init(&priv->lock);
+
        iobase = pci_resource_start(pdev, 0);
        mapbase = pci_resource_start(pdev, 1);
        priv->mapbase = mapbase;