* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (48 commits)
USB: Fix Corruption issue in USB ftdi driver ftdi_sio.c
USB: option: add PID of Huawei E173s 3G modem
OHCI: final fix for NVIDIA problems (I hope)
USB: option: release new PID for ZTE 3G modem
usb: Netlogic: Fix HC_LENGTH call in ehci-xls.c
USB: storage: ene_ub6250: fix compile warnings
USB: option: add id for 3G dongle Model VT1000 of Viettel
USB: serial: pl2303: rm duplicate id
USB: pch_udc: Change company name OKI SEMICONDUCTOR to LAPIS Semiconductor
USB: pch_udc: Support new device LAPIS Semiconductor ML7831 IOH
usb-storage: Accept 8020i-protocol commands longer than 12 bytes
USB: quirks: adding more quirky webcams to avoid squeaky audio
powerpc/usb: fix type cast for address of ioremap to compatible with 64-bit
USB: at91: at91-ohci: fix set/get power
USB: cdc-acm: Fix disconnect() vs close() race
USB: add quirk for Logitech C600 web cam
USB: EHCI: fix HUB TT scheduling issue with iso transfer
USB: XHCI: resume root hubs when the controller resumes
USB: workaround for bug in old version of GCC
USB: ark3116 initialisation fix
...
Kay Sievers <kay.sievers@vrfy.org>
Kenneth W Chen <kenneth.w.chen@intel.com>
Koushik <raghavendra.koushik@neterion.com>
+Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Leonid I Ananiev <leonid.i.ananiev@intel.com>
Linas Vepstas <linas@austin.ibm.com>
Mark Brown <broonie@sirena.org.uk>
Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Takashi YOSHII <takashi.yoshii.zj@renesas.com>
+Yusuke Goda <goda.yusuke@renesas.com>
when a discarded area is read the discard_zeroes_data
parameter will be set to one. Otherwise it will be 0 and
the result of reading a discarded area is undefined.
-What: /sys/block/<disk>/alias
-Date: Aug 2011
-Contact: Nao Nishijima <nao.nishijima.xt@hitachi.com>
-Description:
- A raw device name of a disk does not always point a same disk
- each boot-up time. Therefore, users have to use persistent
- device names, which udev creates when the kernel finds a disk,
- instead of raw device name. However, kernel doesn't show those
- persistent names on its messages (e.g. dmesg).
- This file can store an alias of the disk and it would be
- appeared in kernel messages if it is set. A disk can have an
- alias which length is up to 255bytes. Users can use alphabets,
- numbers, "-" and "_" in alias name. This file is writeonce.
The Linux DRM layer contains code intended to support the needs
of complex graphics devices, usually containing programmable
pipelines well suited to 3D graphics acceleration. Graphics
- drivers in the kernel can make use of DRM functions to make
+ drivers in the kernel may make use of DRM functions to make
tasks like memory management, interrupt handling and DMA easier,
and provide a uniform interface to applications.
</para>
existing drivers.
</para>
<para>
- First, we'll go over some typical driver initialization
+ First, we go over some typical driver initialization
requirements, like setting up command buffers, creating an
initial output configuration, and initializing core services.
- Subsequent sections will cover core internals in more detail,
+ Subsequent sections cover core internals in more detail,
providing implementation notes and examples.
</para>
<para>
</para>
<para>
The core of every DRM driver is struct drm_driver. Drivers
- will typically statically initialize a drm_driver structure,
+ typically statically initialize a drm_driver structure,
then pass it to drm_init() at load time.
</para>
</para>
<programlisting>
static struct drm_driver driver = {
- /* don't use mtrr's here, the Xserver or user space app should
- * deal with them for intel hardware.
+ /* Don't use MTRRs here; the Xserver or userspace app should
+ * deal with them for Intel hardware.
*/
.driver_features =
DRIVER_USE_AGP | DRIVER_REQUIRE_AGP |
</programlisting>
<para>
In the example above, taken from the i915 DRM driver, the driver
- sets several flags indicating what core features it supports.
- We'll go over the individual callbacks in later sections. Since
+ sets several flags indicating what core features it supports;
+ we go over the individual callbacks in later sections. Since
flags indicate which features your driver supports to the DRM
core, you need to set most of them prior to calling drm_init(). Some,
like DRIVER_MODESET can be set later based on user supplied parameters,
<term>DRIVER_HAVE_IRQ</term><term>DRIVER_IRQ_SHARED</term>
<listitem>
<para>
- DRIVER_HAVE_IRQ indicates whether the driver has a IRQ
- handler, DRIVER_IRQ_SHARED indicates whether the device &
+ DRIVER_HAVE_IRQ indicates whether the driver has an IRQ
+ handler. DRIVER_IRQ_SHARED indicates whether the device &
handler support shared IRQs (note that this is required of
PCI drivers).
</para>
<term>DRIVER_DMA_QUEUE</term>
<listitem>
<para>
- If the driver queues DMA requests and completes them
- asynchronously, this flag should be set. Deprecated.
+ Should be set if the driver queues DMA requests and completes them
+ asynchronously. Deprecated.
</para>
</listitem>
</varlistentry>
</variablelist>
<para>
In this specific case, the driver requires AGP and supports
- IRQs. DMA, as we'll see, is handled by device specific ioctls
+ IRQs. DMA, as discussed later, is handled by device-specific ioctls
in this case. It also supports the kernel mode setting APIs, though
unlike in the actual i915 driver source, this example unconditionally
exports KMS capability.
initial output configuration.
</para>
<para>
- Note that the tasks performed at driver load time must not
- conflict with DRM client requirements. For instance, if user
+ If compatibility is a concern (e.g. with drivers converted over
+ to the new interfaces from the old ones), care must be taken to
+ prevent device initialization and control that is incompatible with
+ currently active userspace drivers. For instance, if user
level mode setting drivers are in use, it would be problematic
to perform output discovery & configuration at load time.
- Likewise, if pre-memory management aware user level drivers are
+ Likewise, if user-level drivers unaware of memory management are
in use, memory management and command buffer setup may need to
- be omitted. These requirements are driver specific, and care
+ be omitted. These requirements are driver-specific, and care
needs to be taken to keep both old and new applications and
libraries working. The i915 driver supports the "modeset"
module parameter to control whether advanced features are
- enabled at load time or in legacy fashion. If compatibility is
- a concern (e.g. with drivers converted over to the new interfaces
- from the old ones), care must be taken to prevent incompatible
- device initialization and control with the currently active
- userspace drivers.
+ enabled at load time or in legacy fashion.
</para>
<sect2>
<title>Driver private & performance counters</title>
<para>
The driver private hangs off the main drm_device structure and
- can be used for tracking various device specific bits of
+ can be used for tracking various device-specific bits of
information, like register offsets, command buffer status,
register state for suspend/resume, etc. At load time, a
- driver can simply allocate one and set drm_device.dev_priv
- appropriately; at unload the driver can free it and set
- drm_device.dev_priv to NULL.
+ driver may simply allocate one and set drm_device.dev_priv
+ appropriately; it should be freed and drm_device.dev_priv set
+ to NULL when the driver is unloaded.
</para>
<para>
- The DRM supports several counters which can be used for rough
+ The DRM supports several counters which may be used for rough
performance characterization. Note that the DRM stat counter
system is not often used by applications, and supporting
additional counters is completely optional.
These interfaces are deprecated and should not be used. If performance
monitoring is desired, the developer should investigate and
potentially enhance the kernel perf and tracing infrastructure to export
- GPU related performance information to performance monitoring
- tools and applications.
+ GPU related performance information for consumption by performance
+ monitoring tools and applications.
</para>
</sect2>
<sect2>
<title>Configuring the device</title>
<para>
- Obviously, device configuration will be device specific.
+ Obviously, device configuration is device-specific.
However, there are several common operations: finding a
device's PCI resources, mapping them, and potentially setting
up an IRQ handler.
<para>
Finding & mapping resources is fairly straightforward. The
DRM wrapper functions, drm_get_resource_start() and
- drm_get_resource_len() can be used to find BARs on the given
+ drm_get_resource_len(), may be used to find BARs on the given
drm_device struct. Once those values have been retrieved, the
driver load function can call drm_addmap() to create a new
- mapping for the BAR in question. Note you'll probably want a
+ mapping for the BAR in question. Note that you probably want a
drm_local_map_t in your driver private structure to track any
mappings you create.
<!-- !Fdrivers/gpu/drm/drm_bufs.c drm_get_resource_* -->
<para>
if compatibility with other operating systems isn't a concern
(DRM drivers can run under various BSD variants and OpenSolaris),
- native Linux calls can be used for the above, e.g. pci_resource_*
+ native Linux calls may be used for the above, e.g. pci_resource_*
and iomap*/iounmap. See the Linux device driver book for more
info.
</para>
<para>
- Once you have a register map, you can use the DRM_READn() and
+ Once you have a register map, you may use the DRM_READn() and
DRM_WRITEn() macros to access the registers on your device, or
- use driver specific versions to offset into your MMIO space
- relative to a driver specific base pointer (see I915_READ for
- example).
+ use driver-specific versions to offset into your MMIO space
+ relative to a driver-specific base pointer (see I915_READ for
+ an example).
</para>
<para>
If your device supports interrupt generation, you may want to
- setup an interrupt handler at driver load time as well. This
+ set up an interrupt handler when the driver is loaded. This
is done using the drm_irq_install() function. If your device
supports vertical blank interrupts, it should call
drm_vblank_init() to initialize the core vblank handling code before
</para>
<!--!Fdrivers/char/drm/drm_irq.c drm_irq_install-->
<para>
- Once your interrupt handler is registered (it'll use your
+ Once your interrupt handler is registered (it uses your
drm_driver.irq_handler as the actual interrupt handling
function), you can safely enable interrupts on your device,
assuming any other state your interrupt handler uses is also
using the pci_map_rom() call, a convenience function that
takes care of mapping the actual ROM, whether it has been
shadowed into memory (typically at address 0xc0000) or exists
- on the PCI device in the ROM BAR. Note that once you've
- mapped the ROM and extracted any necessary information, be
- sure to unmap it; on many devices the ROM address decoder is
- shared with other BARs, so leaving it mapped can cause
+ on the PCI device in the ROM BAR. Note that after the ROM
+ has been mapped and any necessary information has been extracted,
+ it should be unmapped; on many devices, the ROM address decoder is
+ shared with other BARs, so leaving it mapped could cause
undesired behavior like hangs or memory corruption.
<!--!Fdrivers/pci/rom.c pci_map_rom-->
</para>
should support a memory manager.
</para>
<para>
- If your driver supports memory management (it should!), you'll
+ If your driver supports memory management (it should!), you
need to set that up at load time as well. How you initialize
- it depends on which memory manager you're using, TTM or GEM.
+ it depends on which memory manager you're using: TTM or GEM.
</para>
<sect3>
<title>TTM initialization</title>
and devices with dedicated video RAM (VRAM), i.e. most discrete
graphics devices. If your device has dedicated RAM, supporting
TTM is desirable. TTM also integrates tightly with your
- driver specific buffer execution function. See the radeon
+ driver-specific buffer execution function. See the radeon
driver for examples.
</para>
<para>
created by the memory manager at runtime. Your global TTM should
have a type of TTM_GLOBAL_TTM_MEM. The size field for the global
object should be sizeof(struct ttm_mem_global), and the init and
- release hooks should point at your driver specific init and
- release routines, which will probably eventually call
- ttm_mem_global_init and ttm_mem_global_release respectively.
+ release hooks should point at your driver-specific init and
+ release routines, which probably eventually call
+ ttm_mem_global_init and ttm_mem_global_release, respectively.
</para>
<para>
Once your global TTM accounting structure is set up and initialized
- (done by calling ttm_global_item_ref on the global object you
- just created), you'll need to create a buffer object TTM to
+ by calling ttm_global_item_ref() on it,
+ you need to create a buffer object TTM to
provide a pool for buffer object allocation by clients and the
kernel itself. The type of this object should be TTM_GLOBAL_TTM_BO,
and its size should be sizeof(struct ttm_bo_global). Again,
- driver specific init and release functions can be provided,
- likely eventually calling ttm_bo_global_init and
- ttm_bo_global_release, respectively. Also like the previous
- object, ttm_global_item_ref is used to create an initial reference
+ driver-specific init and release functions may be provided,
+ likely eventually calling ttm_bo_global_init() and
+ ttm_bo_global_release(), respectively. Also, like the previous
+ object, ttm_global_item_ref() is used to create an initial reference
count for the TTM, which will call your initialization function.
</para>
</sect3>
GEM is an alternative to TTM, designed specifically for UMA
devices. It has simpler initialization and execution requirements
than TTM, but has no VRAM management capability. Core GEM
- initialization is comprised of a basic drm_mm_init call to create
+ is initialized by calling drm_mm_init() to create
a GTT DRM MM object, which provides an address space pool for
- object allocation. In a KMS configuration, the driver will
- need to allocate and initialize a command ring buffer following
- basic GEM initialization. Most UMA devices have a so-called
+ object allocation. In a KMS configuration, the driver
+ needs to allocate and initialize a command ring buffer following
+ core GEM initialization. A UMA device usually has what is called a
"stolen" memory region, which provides space for the initial
framebuffer and large, contiguous memory regions required by the
- device. This space is not typically managed by GEM, and must
+ device. This space is not typically managed by GEM, and it must
be initialized separately into its own DRM MM object.
</para>
<para>
- Initialization will be driver specific, and will depend on
- the architecture of the device. In the case of Intel
+ Initialization is driver-specific. In the case of Intel
integrated graphics chips like 965GM, GEM initialization can
be done by calling the internal GEM init function,
i915_gem_do_init(). Since the 965GM is a UMA device
- (i.e. it doesn't have dedicated VRAM), GEM will manage
+ (i.e. it doesn't have dedicated VRAM), GEM manages
making regular RAM available for GPU operations. Memory set
aside by the BIOS (called "stolen" memory by the i915
- driver) will be managed by the DRM memrange allocator; the
- rest of the aperture will be managed by GEM.
+ driver) is managed by the DRM memrange allocator; the
+ rest of the aperture is managed by GEM.
<programlisting>
/* Basic memrange allocator for stolen space (aka vram) */
drm_memrange_init(&dev_priv->vram, 0, prealloc_size);
<!--!Edrivers/char/drm/drm_memrange.c-->
</para>
<para>
- Once the memory manager has been set up, we can allocate the
+ Once the memory manager has been set up, we may allocate the
command buffer. In the i915 case, this is also done with a
GEM function, i915_gem_init_ringbuffer().
</para>
<sect2>
<title>Output configuration</title>
<para>
- The final initialization task is output configuration. This involves
- finding and initializing the CRTCs, encoders and connectors
- for your device, creating an initial configuration and
- registering a framebuffer console driver.
+ The final initialization task is output configuration. This involves:
+ <itemizedlist>
+ <listitem>
+ Finding and initializing the CRTCs, encoders, and connectors
+ for the device.
+ </listitem>
+ <listitem>
+ Creating an initial configuration.
+ </listitem>
+ <listitem>
+ Registering a framebuffer console driver.
+ </listitem>
+ </itemizedlist>
</para>
<sect3>
<title>Output discovery and initialization</title>
<para>
- Several core functions exist to create CRTCs, encoders and
- connectors, namely drm_crtc_init(), drm_connector_init() and
+ Several core functions exist to create CRTCs, encoders, and
+ connectors, namely: drm_crtc_init(), drm_connector_init(), and
drm_encoder_init(), along with several "helper" functions to
perform common tasks.
</para>
</programlisting>
<para>
In the example above (again, taken from the i915 driver), a
- CRT connector and encoder combination is created. A device
- specific i2c bus is also created, for fetching EDID data and
+ CRT connector and encoder combination is created. A device-specific
+ i2c bus is also created for fetching EDID data and
performing monitor detection. Once the process is complete,
- the new connector is registered with sysfs, to make its
+ the new connector is registered with sysfs to make its
properties available to applications.
</para>
<sect4>
Since many PC-class graphics devices have similar display output
designs, the DRM provides a set of helper functions to make
output management easier. The core helper routines handle
- encoder re-routing and disabling of unused functions following
- mode set. Using the helpers is optional, but recommended for
+ encoder re-routing and the disabling of unused functions following
+ mode setting. Using the helpers is optional, but recommended for
devices with PC-style architectures (i.e. a set of display planes
for feeding pixels to encoders which are in turn routed to
connectors). Devices with more complex requirements needing
- finer grained management can opt to use the core callbacks
+ finer grained management may opt to use the core callbacks
directly.
</para>
<para>
</para>
</sect4>
<para>
- For each encoder, CRTC and connector, several functions must
- be provided, depending on the object type. Encoder objects
- need to provide a DPMS (basically on/off) function, mode fixup
- (for converting requested modes into native hardware timings),
- and prepare, set and commit functions for use by the core DRM
- helper functions. Connector helpers need to provide mode fetch and
- validity functions as well as an encoder matching function for
- returning an ideal encoder for a given connector. The core
- connector functions include a DPMS callback, (deprecated)
- save/restore routines, detection, mode probing, property handling,
- and cleanup functions.
+ Each encoder object needs to provide:
+ <itemizedlist>
+ <listitem>
+ A DPMS (basically on/off) function.
+ </listitem>
+ <listitem>
+ A mode-fixup function (for converting requested modes into
+ native hardware timings).
+ </listitem>
+ <listitem>
+ Functions (prepare, set, and commit) for use by the core DRM
+ helper functions.
+ </listitem>
+ </itemizedlist>
+ Connector helpers need to provide functions (mode-fetch, validity,
+ and encoder-matching) for returning an ideal encoder for a given
+ connector. The core connector functions include a DPMS callback,
+ save/restore routines (deprecated), detection, mode probing,
+ property handling, and cleanup functions.
</para>
<!--!Edrivers/char/drm/drm_crtc.h-->
<!--!Edrivers/char/drm/drm_crtc.c-->
<title>VBlank event handling</title>
<para>
The DRM core exposes two vertical blank related ioctls:
- DRM_IOCTL_WAIT_VBLANK and DRM_IOCTL_MODESET_CTL.
+ <variablelist>
+ <varlistentry>
+ <term>DRM_IOCTL_WAIT_VBLANK</term>
+ <listitem>
+ <para>
+ This takes a struct drm_wait_vblank structure as its argument,
+ and it is used to block or request a signal when a specified
+ vblank event occurs.
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>DRM_IOCTL_MODESET_CTL</term>
+ <listitem>
+ <para>
+ This should be called by application level drivers before and
+ after mode setting, since on many devices the vertical blank
+ counter is reset at that time. Internally, the DRM snapshots
+ the last vblank count when the ioctl is called with the
+ _DRM_PRE_MODESET command, so that the counter won't go backwards
+ (which is dealt with when _DRM_POST_MODESET is used).
+ </para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
<!--!Edrivers/char/drm/drm_irq.c-->
</para>
- <para>
- DRM_IOCTL_WAIT_VBLANK takes a struct drm_wait_vblank structure
- as its argument, and is used to block or request a signal when a
- specified vblank event occurs.
- </para>
- <para>
- DRM_IOCTL_MODESET_CTL should be called by application level
- drivers before and after mode setting, since on many devices the
- vertical blank counter will be reset at that time. Internally,
- the DRM snapshots the last vblank count when the ioctl is called
- with the _DRM_PRE_MODESET command so that the counter won't go
- backwards (which is dealt with when _DRM_POST_MODESET is used).
- </para>
<para>
To support the functions above, the DRM core provides several
helper functions for tracking vertical blank counters, and
register. The enable and disable vblank callbacks should enable
and disable vertical blank interrupts, respectively. In the
absence of DRM clients waiting on vblank events, the core DRM
- code will use the disable_vblank() function to disable
- interrupts, which saves power. They'll be re-enabled again when
+ code uses the disable_vblank() function to disable
+ interrupts, which saves power. They are re-enabled again when
a client calls the vblank wait ioctl above.
</para>
<para>
- Devices that don't provide a count register can simply use an
+ A device that doesn't provide a count register may simply use an
internal atomic counter incremented on every vertical blank
- interrupt, and can make their enable and disable vblank
- functions into no-ops.
+ interrupt (and then treat the enable_vblank() and disable_vblank()
+ callbacks as no-ops).
</para>
</sect1>
<sect1>
<title>Memory management</title>
<para>
- The memory manager lies at the heart of many DRM operations, and
- is also required to support advanced client features like OpenGL
- pbuffers. The DRM currently contains two memory managers, TTM
+ The memory manager lies at the heart of many DRM operations; it
+ is required to support advanced client features like OpenGL
+ pbuffers. The DRM currently contains two memory managers: TTM
and GEM.
</para>
<para>
GEM-enabled drivers must provide gem_init_object() and
gem_free_object() callbacks to support the core memory
- allocation routines. They should also provide several driver
- specific ioctls to support command execution, pinning, buffer
+ allocation routines. They should also provide several driver-specific
+ ioctls to support command execution, pinning, buffer
read & write, mapping, and domain ownership transfers.
</para>
<para>
- On a fundamental level, GEM involves several operations: memory
- allocation and freeing, command execution, and aperture management
- at command execution time. Buffer object allocation is relatively
+ On a fundamental level, GEM involves several operations:
+ <itemizedlist>
+ <listitem>Memory allocation and freeing</listitem>
+ <listitem>Command execution</listitem>
+ <listitem>Aperture management at command execution time</listitem>
+ </itemizedlist>
+ Buffer object allocation is relatively
straightforward and largely provided by Linux's shmem layer, which
provides memory to back each object. When mapped into the GTT
or used in a command buffer, the backing pages for an object are
flushed to memory and marked write combined so as to be coherent
- with the GPU. Likewise, when the GPU finishes rendering to an object,
- if the CPU accesses it, it must be made coherent with the CPU's view
+ with the GPU. Likewise, if the CPU accesses an object after the GPU
+ has finished rendering to the object, then the object must be made
+ coherent with the CPU's view
of memory, usually involving GPU cache flushing of various kinds.
- This core CPU<->GPU coherency management is provided by the GEM
- set domain function, which evaluates an object's current domain and
+ This core CPU<->GPU coherency management is provided by a
+ device-specific ioctl, which evaluates an object's current domain and
performs any necessary flushing or synchronization to put the object
into the desired coherency domain (note that the object may be busy,
- i.e. an active render target; in that case the set domain function
- will block the client and wait for rendering to complete before
+ i.e. an active render target; in that case, setting the domain
+ blocks the client and waits for rendering to complete before
performing any necessary flushing operations).
</para>
<para>
Perhaps the most important GEM function is providing a command
execution interface to clients. Client programs construct command
- buffers containing references to previously allocated memory objects
- and submit them to GEM. At that point, GEM will take care to bind
+ buffers containing references to previously allocated memory objects,
+ and then submit them to GEM. At that point, GEM takes care to bind
all the objects into the GTT, execute the buffer, and provide
necessary synchronization between clients accessing the same buffers.
This often involves evicting some objects from the GTT and re-binding
others (a fairly expensive operation), and providing relocation
support which hides fixed GTT offsets from clients. Clients must
take care not to submit command buffers that reference more objects
- than can fit in the GTT or GEM will reject them and no rendering
+ than can fit in the GTT; otherwise, GEM will reject them and no rendering
will occur. Similarly, if several objects in the buffer require
fence registers to be allocated for correct rendering (e.g. 2D blits
on pre-965 chips), care must be taken not to require more fence
<title>Output management</title>
<para>
At the core of the DRM output management code is a set of
- structures representing CRTCs, encoders and connectors.
+ structures representing CRTCs, encoders, and connectors.
</para>
<para>
A CRTC is an abstraction representing a part of the chip that
<sect1>
<title>Framebuffer management</title>
<para>
- In order to set a mode on a given CRTC, encoder and connector
- configuration, clients need to provide a framebuffer object which
- will provide a source of pixels for the CRTC to deliver to the encoder(s)
- and ultimately the connector(s) in the configuration. A framebuffer
- is fundamentally a driver specific memory object, made into an opaque
- handle by the DRM addfb function. Once an fb has been created this
- way it can be passed to the KMS mode setting routines for use in
- a configuration.
+ Clients need to provide a framebuffer object which provides a source
+ of pixels for a CRTC to deliver to the encoder(s) and ultimately the
+ connector(s). A framebuffer is fundamentally a driver-specific memory
+ object, made into an opaque handle by the DRM's addfb() function.
+ Once a framebuffer has been created this way, it may be passed to the
+ KMS mode setting routines for use in a completed configuration.
</para>
</sect1>
<sect1>
<title>Command submission & fencing</title>
<para>
- This should cover a few device specific command submission
+ This should cover a few device-specific command submission
implementations.
</para>
</sect1>
<para>
The DRM core provides some suspend/resume code, but drivers
wanting full suspend/resume support should provide save() and
- restore() functions. These will be called at suspend,
+ restore() functions. These are called at suspend,
hibernate, or resume time, and should perform any state save or
restore required by your device across suspend or hibernate
states.
<para>
The DRM core exports several interfaces to applications,
generally intended to be used through corresponding libdrm
- wrapper functions. In addition, drivers export device specific
- interfaces for use by userspace drivers & device aware
+ wrapper functions. In addition, drivers export device-specific
+ interfaces for use by userspace drivers & device-aware
applications through ioctls and sysfs files.
</para>
<para>
management, memory management, and output management.
</para>
<para>
- Cover generic ioctls and sysfs layout here. Only need high
- level info, since man pages will cover the rest.
+ Cover generic ioctls and sysfs layout here. We only need high-level
+ info, since man pages should cover the rest.
</para>
</chapter>
</para>
<itemizedlist>
+<listitem><para>
+<varname>const char *name</varname>: Optional. Set this to help identify
+the memory region, it will show up in the corresponding sysfs node.
+</para></listitem>
+
<listitem><para>
<varname>int memtype</varname>: Required if the mapping is used. Set this to
<varname>UIO_MEM_PHYS</varname> if you you have physical memory on your
</itemizedlist>
<para>
-Please do not touch the <varname>kobj</varname> element of
+Please do not touch the <varname>map</varname> element of
<varname>struct uio_mem</varname>! It is used by the UIO framework
to set up sysfs files for this mapping. Simply leave it alone.
</para>
"SCSI support" in your kernel configuration to be able to use SCSI
tape drives with your Smart Array 5xxx controller.
-Additionally, note that the driver will not engage the SCSI core at init
-time. The driver must be directed to dynamically engage the SCSI core via
-the /proc filesystem entry which the "block" side of the driver creates as
-/proc/driver/cciss/cciss* at runtime. This is because at driver init time,
-the SCSI core may not yet be initialized (because the driver is a block
-driver) and attempting to register it with the SCSI core in such a case
-would cause a hang. This is best done via an initialization script
-(typically in /etc/init.d, but could vary depending on distribution).
+Additionally, note that the driver will engage the SCSI core at init
+time if any tape drives or medium changers are detected. The driver may
+also be directed to dynamically engage the SCSI core via the /proc filesystem
+entry which the "block" side of the driver creates as
+/proc/driver/cciss/cciss* at runtime. This is best done via a script.
+
For example:
for x in /proc/driver/cciss/cciss[0-9]*
From a second, unrelated bash shell:
$ kill -SIGSTOP 16690
- $ kill -SIGCONT 16990
+ $ kill -SIGCONT 16690
- <at this point 16990 exits and causes 16644 to exit too>
+ <at this point 16690 exits and causes 16644 to exit too>
This happens because bash can observe both signals and choose how it
responds to them.
default FALSE
min_pmtu - INTEGER
- default 562 - minimum discovered Path MTU
+ default 552 - minimum discovered Path MTU
route/max_size - INTEGER
Maximum number of routes allowed in the kernel. Increase
struct serial_rs485 rs485conf;
- /* Set RS485 mode: */
+ /* Enable RS485 mode: */
rs485conf.flags |= SER_RS485_ENABLED;
+ /* Set logical level for RTS pin equal to 1 when sending: */
+ rs485conf.flags |= SER_RS485_RTS_ON_SEND;
+ /* or, set logical level for RTS pin equal to 0 when sending: */
+ rs485conf.flags &= ~(SER_RS485_RTS_ON_SEND);
+
+ /* Set logical level for RTS pin equal to 1 after sending: */
+ rs485conf.flags |= SER_RS485_RTS_AFTER_SEND;
+ /* or, set logical level for RTS pin equal to 0 after sending: */
+ rs485conf.flags &= ~(SER_RS485_RTS_AFTER_SEND);
+
/* Set rts delay before send, if needed: */
- rs485conf.flags |= SER_RS485_RTS_BEFORE_SEND;
rs485conf.delay_rts_before_send = ...;
/* Set rts delay after send, if needed: */
- rs485conf.flags |= SER_RS485_RTS_AFTER_SEND;
rs485conf.delay_rts_after_send = ...;
/* Set this flag if you want to receive data even whilst sending data */
ref Reference board
mic-ref Reference board with power management for ports
dell-s14 Dell laptop
+ dell-vostro-3500 Dell Vostro 3500 laptop
hp HP laptops with (inverted) mute-LED
hp-dv7-4000 HP dv-7 4000
auto BIOS setup (default)
~~~~~~~~~~~~~~~~
The latest development codes for HD-audio are found on sound git tree:
-- git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git
+- git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git
The master branch or for-next branches can be used as the main
development branches in general while the HD-audio specific patches
install(-modules). See INSTALL in the package. The snapshot tarballs
are found at:
-- ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/
+- ftp://ftp.suse.com/pub/people/tiwai/snapshot/
Sending a Bug Report
The hda-verb program is found in the ftp directory:
-- ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/misc/
+- ftp://ftp.suse.com/pub/people/tiwai/misc/
Also a git repository is available:
The package is found in:
-- ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/misc/
+- ftp://ftp.suse.com/pub/people/tiwai/misc/
A git repository is available:
targets += missing-syscalls
quiet_cmd_syscalls = CALL $<
- cmd_syscalls = $(CONFIG_SHELL) $< $(CC) $(c_flags)
+ cmd_syscalls = $(CONFIG_SHELL) $< $(CC) $(c_flags) $(missing_syscalls_flags)
missing-syscalls: scripts/checksyscalls.sh $(offsets-file) FORCE
$(call cmd,syscalls)
ARM/SAMSUNG S5P SERIES Multi Format Codec (MFC) SUPPORT
M: Kyungmin Park <kyungmin.park@samsung.com>
M: Kamil Debski <k.debski@samsung.com>
+M: Jeongtae Park <jtp.park@samsung.com>
L: linux-arm-kernel@lists.infradead.org
L: linux-media@vger.kernel.org
S: Maintained
F: net/wireless/*
X: net/wireless/wext*
+CHAR and MISC DRIVERS
+M: Arnd Bergmann <arnd@arndb.de>
+M: Greg Kroah-Hartman <greg@kroah.com>
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git
+S: Maintained
+F: drivers/char/*
+F: drivers/misc/*
+
CHECKPATCH
M: Andy Whitcroft <apw@canonical.com>
S: Supported
F: drivers/connector/
CONTROL GROUPS (CGROUPS)
-M: Paul Menage <paul@paulmenage.org>
+M: Tejun Heo <tj@kernel.org>
M: Li Zefan <lizf@cn.fujitsu.com>
L: containers@lists.linux-foundation.org
+L: cgroups@vger.kernel.org
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup.git
S: Maintained
F: include/linux/cgroup*
F: kernel/cgroup*
F: drivers/gpu/drm/i915
F: include/drm/i915*
+DRM DRIVERS FOR EXYNOS
+M: Inki Dae <inki.dae@samsung.com>
+L: dri-devel@lists.freedesktop.org
+S: Supported
+F: drivers/gpu/drm/exynos
+F: include/drm/exynos*
+
DSCC4 DRIVER
M: Francois Romieu <romieu@fr.zoreil.com>
L: netdev@vger.kernel.org
F: drivers/net/ethernet/i825xx/eexpress.*
ETHERNET BRIDGE
-M: Stephen Hemminger <shemminger@linux-foundation.org>
+M: Stephen Hemminger <shemminger@vyatta.com>
L: bridge@lists.linux-foundation.org
L: netdev@vger.kernel.org
W: http://www.linuxfoundation.org/en/Net:Bridge
F: include/linux/jbd2.h
JSM Neo PCI based serial card
-M: Breno Leitao <leitao@linux.vnet.ibm.com>
+M: Lucas Tavares <lucaskt@linux.vnet.ibm.com>
L: linux-serial@vger.kernel.org
S: Maintained
F: drivers/tty/serial/jsm/
M: Balbir Singh <bsingharora@gmail.com>
M: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
M: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
+L: cgroups@vger.kernel.org
L: linux-mm@kvack.org
S: Maintained
F: mm/memcontrol.c
M: Ralf Baechle <ralf@linux-mips.org>
L: linux-mips@linux-mips.org
W: http://www.linux-mips.org/
-T: git git://git.linux-mips.org/pub/scm/linux.git
+T: git git://git.linux-mips.org/pub/scm/ralf/linux.git
Q: http://patchwork.linux-mips.org/project/linux-mips/list/
S: Supported
F: Documentation/mips/
F: drivers/infiniband/hw/nes/
NETEM NETWORK EMULATOR
-M: Stephen Hemminger <shemminger@linux-foundation.org>
+M: Stephen Hemminger <shemminger@vyatta.com>
L: netem@lists.linux-foundation.org
S: Maintained
F: net/sched/sch_netem.c
F: include/linux/ppdev.h
PARAVIRT_OPS INTERFACE
-M: Jeremy Fitzhardinge <jeremy@xensource.com>
+M: Jeremy Fitzhardinge <jeremy@goop.org>
M: Chris Wright <chrisw@sous-sol.org>
M: Alok Kataria <akataria@vmware.com>
M: Rusty Russell <rusty@rustcorp.com.au>
F: drivers/usb/misc/sisusbvga/
SKGE, SKY2 10/100/1000 GIGABIT ETHERNET DRIVERS
-M: Stephen Hemminger <shemminger@linux-foundation.org>
+M: Stephen Hemminger <shemminger@vyatta.com>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/ethernet/marvell/sk*
SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT (ASoC)
M: Liam Girdwood <lrg@ti.com>
M: Mark Brown <broonie@opensource.wolfsonmicro.com>
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
W: http://alsa-project.org/main/index.php/ASoC
S: Supported
F: arch/x86/kernel/cpu/mcheck/*
XEN HYPERVISOR INTERFACE
-M: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
M: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+M: Jeremy Fitzhardinge <jeremy@goop.org>
L: xen-devel@lists.xensource.com (moderated for non-subscribers)
L: virtualization@lists.linux-foundation.org
S: Supported
XFS FILESYSTEM
P: Silicon Graphics Inc
-M: Alex Elder <aelder@sgi.com>
+M: Ben Myers <bpm@sgi.com>
+M: Alex Elder <elder@kernel.org>
M: xfs-masters@oss.sgi.com
L: xfs@oss.sgi.com
W: http://oss.sgi.com/projects/xfs
VERSION = 3
PATCHLEVEL = 2
SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc2
NAME = Saber-toothed Squirrel
# *DOCUMENTATION*
$(obj)/dtbs: $(addprefix $(obj)/, $(dtb-y))
+clean-files := *.dtb
+
quiet_cmd_uimage = UIMAGE $@
cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A arm -O linux -T kernel \
-C none -a $(LOADADDR) -e $(STARTADDR) \
sdhci@c8000400 {
cd-gpios = <&gpio 69 0>; /* gpio PI5 */
wp-gpios = <&gpio 57 0>; /* gpio PH1 */
- power-gpios = <&gpio 155 0>; /* gpio PT3 */
+ power-gpios = <&gpio 70 0>; /* gpio PI6 */
};
sdhci@c8000600 {
- power-gpios = <&gpio 70 0>; /* gpio PI6 */
support-8bit;
};
};
#ifndef __ASM_ARM_HARDWARE_L2X0_H
#define __ASM_ARM_HARDWARE_L2X0_H
+#include <linux/errno.h>
+
#define L2X0_CACHE_ID 0x000
#define L2X0_CACHE_TYPE 0x004
#define L2X0_CTRL 0x100
struct tag;
struct meminfo;
struct sys_timer;
+struct pt_regs;
struct machine_desc {
unsigned int nr; /* architecture number */
#define __NR_syncfs (__NR_SYSCALL_BASE+373)
#define __NR_sendmmsg (__NR_SYSCALL_BASE+374)
#define __NR_setns (__NR_SYSCALL_BASE+375)
+#define __NR_process_vm_readv (__NR_SYSCALL_BASE+376)
+#define __NR_process_vm_writev (__NR_SYSCALL_BASE+377)
/*
* The following SWIs are ARM private.
CALL(sys_syncfs)
CALL(sys_sendmmsg)
/* 375 */ CALL(sys_setns)
+ CALL(sys_process_vm_readv)
+ CALL(sys_process_vm_writev)
#ifndef syscalls_counted
.equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
#define syscalls_counted
* r13 = *virtual* address to jump to upon completion
*/
__enable_mmu:
-#ifdef CONFIG_ALIGNMENT_TRAP
+#if defined(CONFIG_ALIGNMENT_TRAP) && __LINUX_ARM_ARCH__ < 6
orr r0, r0, #CR_A
#else
bic r0, r0, #CR_A
int machine_kexec_prepare(struct kimage *image)
{
- unsigned long page_list;
- void *reboot_code_buffer;
- page_list = image->head & PAGE_MASK;
-
- reboot_code_buffer = page_address(image->control_code_page);
-
- /* Prepare parameters for reboot_code_buffer*/
- kexec_start_address = image->start;
- kexec_indirection_page = page_list;
- kexec_mach_type = machine_arch_type;
- kexec_boot_atags = image->start - KEXEC_ARM_ZIMAGE_OFFSET + KEXEC_ARM_ATAGS_OFFSET;
-
- /* copy our kernel relocation code to the control code page */
- memcpy(reboot_code_buffer,
- relocate_new_kernel, relocate_new_kernel_size);
-
- flush_icache_range((unsigned long) reboot_code_buffer,
- (unsigned long) reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE);
return 0;
}
void machine_kexec(struct kimage *image)
{
+ unsigned long page_list;
unsigned long reboot_code_buffer_phys;
void *reboot_code_buffer;
+
+ page_list = image->head & PAGE_MASK;
+
/* we need both effective and real address here */
reboot_code_buffer_phys =
page_to_pfn(image->control_code_page) << PAGE_SHIFT;
reboot_code_buffer = page_address(image->control_code_page);
+ /* Prepare parameters for reboot_code_buffer*/
+ kexec_start_address = image->start;
+ kexec_indirection_page = page_list;
+ kexec_mach_type = machine_arch_type;
+ kexec_boot_atags = image->start - KEXEC_ARM_ZIMAGE_OFFSET + KEXEC_ARM_ATAGS_OFFSET;
+
+ /* copy our kernel relocation code to the control code page */
+ memcpy(reboot_code_buffer,
+ relocate_new_kernel, relocate_new_kernel_size);
+
+
+ flush_icache_range((unsigned long) reboot_code_buffer,
+ (unsigned long) reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE);
printk(KERN_INFO "Bye!\n");
if (kexec_reinit)
cpu_name, read_cpuid_id(), read_cpuid_id() & 15,
proc_arch[cpu_architecture()], cr_alignment);
- sprintf(init_utsname()->machine, "%s%c", list->arch_name, ENDIANNESS);
- sprintf(elf_platform, "%s%c", list->elf_name, ENDIANNESS);
+ snprintf(init_utsname()->machine, __NEW_UTS_LEN + 1, "%s%c",
+ list->arch_name, ENDIANNESS);
+ snprintf(elf_platform, ELF_PLATFORM_SIZE, "%s%c",
+ list->elf_name, ENDIANNESS);
elf_hwcap = list->elf_hwcap;
#ifndef CONFIG_ARM_THUMB
elf_hwcap &= ~HWCAP_THUMB;
* USB HS Device (Gadget)
* -------------------------------------------------------------------- */
-#if defined(CONFIG_USB_GADGET_ATMEL_USBA) || defined(CONFIG_USB_GADGET_ATMEL_USBA_MODULE)
+#if defined(CONFIG_USB_ATMEL_USBA) || defined(CONFIG_USB_ATMEL_USBA_MODULE)
static struct resource usba_udc_resources[] = {
[0] = {
#if defined(CONFIG_SERIAL_ATMEL)
static struct resource dbgu_resources[] = {
[0] = {
- .start = AT91_VA_BASE_SYS + AT91_DBGU,
- .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+ .start = AT91_BASE_SYS + AT91_DBGU,
+ .end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
static struct atmel_uart_data dbgu_data = {
.use_dma_tx = 0,
.use_dma_rx = 0, /* DBGU not capable of receive DMA */
- .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
};
static u64 dbgu_dmamask = DMA_BIT_MASK(32);
#if defined(CONFIG_SERIAL_ATMEL)
static struct resource dbgu_resources[] = {
[0] = {
- .start = AT91_VA_BASE_SYS + AT91_DBGU,
- .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+ .start = AT91_BASE_SYS + AT91_DBGU,
+ .end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
static struct atmel_uart_data dbgu_data = {
.use_dma_tx = 0,
.use_dma_rx = 0, /* DBGU not capable of receive DMA */
- .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
};
static u64 dbgu_dmamask = DMA_BIT_MASK(32);
#if defined(CONFIG_SERIAL_ATMEL)
static struct resource dbgu_resources[] = {
[0] = {
- .start = AT91_VA_BASE_SYS + AT91_DBGU,
- .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+ .start = AT91_BASE_SYS + AT91_DBGU,
+ .end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
static struct atmel_uart_data dbgu_data = {
.use_dma_tx = 0,
.use_dma_rx = 0, /* DBGU not capable of receive DMA */
- .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
};
static u64 dbgu_dmamask = DMA_BIT_MASK(32);
#if defined(CONFIG_SERIAL_ATMEL)
static struct resource dbgu_resources[] = {
[0] = {
- .start = AT91_VA_BASE_SYS + AT91_DBGU,
- .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+ .start = AT91_BASE_SYS + AT91_DBGU,
+ .end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
static struct atmel_uart_data dbgu_data = {
.use_dma_tx = 0,
.use_dma_rx = 0, /* DBGU not capable of receive DMA */
- .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
};
static u64 dbgu_dmamask = DMA_BIT_MASK(32);
static struct resource dbgu_resources[] = {
[0] = {
- .start = AT91_VA_BASE_SYS + AT91_DBGU,
- .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+ .start = AT91_BASE_SYS + AT91_DBGU,
+ .end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
static struct atmel_uart_data dbgu_data = {
.use_dma_tx = 0,
.use_dma_rx = 0, /* DBGU not capable of receive DMA */
- .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
};
static u64 dbgu_dmamask = DMA_BIT_MASK(32);
* USB HS Device (Gadget)
* -------------------------------------------------------------------- */
-#if defined(CONFIG_USB_GADGET_ATMEL_USBA) || defined(CONFIG_USB_GADGET_ATMEL_USBA_MODULE)
+#if defined(CONFIG_USB_ATMEL_USBA) || defined(CONFIG_USB_ATMEL_USBA_MODULE)
static struct resource usba_udc_resources[] = {
[0] = {
.start = AT91SAM9G45_UDPHS_FIFO,
#if defined(CONFIG_SERIAL_ATMEL)
static struct resource dbgu_resources[] = {
[0] = {
- .start = AT91_VA_BASE_SYS + AT91_DBGU,
- .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+ .start = AT91_BASE_SYS + AT91_DBGU,
+ .end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
static struct atmel_uart_data dbgu_data = {
.use_dma_tx = 0,
.use_dma_rx = 0,
- .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
};
static u64 dbgu_dmamask = DMA_BIT_MASK(32);
* USB HS Device (Gadget)
* -------------------------------------------------------------------- */
-#if defined(CONFIG_USB_GADGET_ATMEL_USBA) || defined(CONFIG_USB_GADGET_ATMEL_USBA_MODULE)
+#if defined(CONFIG_USB_ATMEL_USBA) || defined(CONFIG_USB_ATMEL_USBA_MODULE)
static struct resource usba_udc_resources[] = {
[0] = {
#if defined(CONFIG_SERIAL_ATMEL)
static struct resource dbgu_resources[] = {
[0] = {
- .start = AT91_VA_BASE_SYS + AT91_DBGU,
- .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+ .start = AT91_BASE_SYS + AT91_DBGU,
+ .end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
static struct atmel_uart_data dbgu_data = {
.use_dma_tx = 0,
.use_dma_rx = 0, /* DBGU not capable of receive DMA */
- .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
};
static u64 dbgu_dmamask = DMA_BIT_MASK(32);
#include <video/s1d13xxxfb.h>
-static void __init yl9200_init_video(void)
+static void yl9200_init_video(void)
{
/* NWAIT Signal */
at91_set_A_periph(AT91_PIN_PC6, 0);
#ifndef __ASM_ARCH_VMALLOC_H
#define __ASM_ARCH_VMALLOC_H
+#include <mach/hardware.h>
+
#define VMALLOC_END (AT91_VIRT_BASE & PGDIR_MASK)
#endif
*/
bcmring_clocksource_init();
- sp804_clockevents_register(TIMER0_VA_BASE, IRQ_TIMER0, "timer0");
+ sp804_clockevents_init(TIMER0_VA_BASE, IRQ_TIMER0, "timer0");
}
struct sys_timer bcmring_timer = {
#include <linux/mm.h>
#include <linux/pfn.h>
#include <linux/atomic.h>
+#include <linux/sched.h>
#include <mach/dma.h>
/* I don't quite understand why dc4 fails when this is set to 1 and DMA is enabled */
-zreladdr-$(CONFIG_ARCH_MX1) += 0x08008000
-params_phys-$(CONFIG_ARCH_MX1) := 0x08000100
-initrd_phys-$(CONFIG_ARCH_MX1) := 0x08800000
+zreladdr-$(CONFIG_SOC_IMX1) += 0x08008000
+params_phys-$(CONFIG_SOC_IMX1) := 0x08000100
+initrd_phys-$(CONFIG_SOC_IMX1) := 0x08800000
-zreladdr-$(CONFIG_MACH_MX21) += 0xC0008000
-params_phys-$(CONFIG_MACH_MX21) := 0xC0000100
-initrd_phys-$(CONFIG_MACH_MX21) := 0xC0800000
+zreladdr-$(CONFIG_SOC_IMX21) += 0xC0008000
+params_phys-$(CONFIG_SOC_IMX21) := 0xC0000100
+initrd_phys-$(CONFIG_SOC_IMX21) := 0xC0800000
-zreladdr-$(CONFIG_ARCH_MX25) += 0x80008000
-params_phys-$(CONFIG_ARCH_MX25) := 0x80000100
-initrd_phys-$(CONFIG_ARCH_MX25) := 0x80800000
+zreladdr-$(CONFIG_SOC_IMX25) += 0x80008000
+params_phys-$(CONFIG_SOC_IMX25) := 0x80000100
+initrd_phys-$(CONFIG_SOC_IMX25) := 0x80800000
-zreladdr-$(CONFIG_MACH_MX27) += 0xA0008000
-params_phys-$(CONFIG_MACH_MX27) := 0xA0000100
-initrd_phys-$(CONFIG_MACH_MX27) := 0xA0800000
+zreladdr-$(CONFIG_SOC_IMX27) += 0xA0008000
+params_phys-$(CONFIG_SOC_IMX27) := 0xA0000100
+initrd_phys-$(CONFIG_SOC_IMX27) := 0xA0800000
-zreladdr-$(CONFIG_ARCH_MX3) += 0x80008000
-params_phys-$(CONFIG_ARCH_MX3) := 0x80000100
-initrd_phys-$(CONFIG_ARCH_MX3) := 0x80800000
+zreladdr-$(CONFIG_SOC_IMX31) += 0x80008000
+params_phys-$(CONFIG_SOC_IMX31) := 0x80000100
+initrd_phys-$(CONFIG_SOC_IMX31) := 0x80800000
+
+zreladdr-$(CONFIG_SOC_IMX35) += 0x80008000
+params_phys-$(CONFIG_SOC_IMX35) := 0x80000100
+initrd_phys-$(CONFIG_SOC_IMX35) := 0x80800000
zreladdr-$(CONFIG_SOC_IMX6Q) += 0x10008000
params_phys-$(CONFIG_SOC_IMX6Q) := 0x10000100
return -EINVAL;
max_div = ((d->bm_pred >> d->bp_pred) + 1) *
- ((d->bm_pred >> d->bp_pred) + 1);
+ ((d->bm_podf >> d->bp_podf) + 1);
div = parent_rate / rate;
if (div == 0)
clk_set_rate(&asrc_serial_clk, 1500000);
clk_set_rate(&enfc_clk, 11000000);
+ /*
+ * Before pinctrl API is available, we have to rely on the pad
+ * configuration set up by bootloader. For usdhc example here,
+ * u-boot sets up the pads for 49.5 MHz case, and we have to lower
+ * the usdhc clock from 198 to 49.5 MHz to match the pad configuration.
+ *
+ * FIXME: This is should be removed after pinctrl API is available.
+ * At that time, usdhc driver can call pinctrl API to change pad
+ * configuration dynamically per different usdhc clock settings.
+ */
+ clk_set_rate(&usdhc1_clk, 49500000);
+ clk_set_rate(&usdhc2_clk, 49500000);
+ clk_set_rate(&usdhc3_clk, 49500000);
+ clk_set_rate(&usdhc4_clk, 49500000);
+
np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt");
base = of_iomap(np, 0);
WARN_ON(!base);
obj-$(CONFIG_MSM_SMD) += last_radio_log.o
obj-$(CONFIG_MSM_SCM) += scm.o scm-boot.o
+CFLAGS_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1)
+
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
obj-$(CONFIG_SMP) += headsmp.o platsmp.o
extern struct sys_timer msm_timer;
-static void __init msm7x30_fixup(struct machine_desc *desc, struct tag *tag,
- char **cmdline, struct meminfo *mi)
+static void __init msm7x30_fixup(struct tag *tag, char **cmdline,
+ struct meminfo *mi)
{
for (; tag->hdr.size; tag = tag_next(tag))
if (tag->hdr.tag == ATAG_MEM && tag->u.mem.start == 0x200000) {
#include "devices.h"
-static void __init msm8960_fixup(struct machine_desc *desc, struct tag *tag,
- char **cmdline, struct meminfo *mi)
+static void __init msm8960_fixup(struct tag *tag, char **cmdline,
+ struct meminfo *mi)
{
for (; tag->hdr.size; tag = tag_next(tag))
if (tag->hdr.tag == ATAG_MEM &&
#include <mach/board.h>
#include <mach/msm_iomap.h>
-static void __init msm8x60_fixup(struct machine_desc *desc, struct tag *tag,
- char **cmdline, struct meminfo *mi)
+static void __init msm8x60_fixup(struct tag *tag, char **cmdline,
+ struct meminfo *mi)
{
for (; tag->hdr.size; tag = tag_next(tag))
if (tag->hdr.tag == ATAG_MEM &&
__asmeq("%1", "r0")
__asmeq("%2", "r1")
__asmeq("%3", "r2")
+#ifdef REQUIRES_SEC
+ ".arch_extension sec\n"
+#endif
"smc #0 @ switch to secure world\n"
: "=r" (r0)
: "r" (r0), "r" (r1), "r" (r2)
NULL, NULL, &ipg_clk, &gpt_ipg_clk);
DEFINE_CLOCK(pwm1_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG6_OFFSET,
- NULL, NULL, &ipg_clk, NULL);
+ NULL, NULL, &ipg_perclk, NULL);
DEFINE_CLOCK(pwm2_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG8_OFFSET,
- NULL, NULL, &ipg_clk, NULL);
+ NULL, NULL, &ipg_perclk, NULL);
/* I2C */
DEFINE_CLOCK(i2c1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG9_OFFSET,
return 0;
}
+#ifdef CONFIG_OF
static void __init clk_get_freq_dt(unsigned long *ckil, unsigned long *osc,
unsigned long *ckih1, unsigned long *ckih2)
{
clk_get_freq_dt(&ckil, &osc, &ckih1, &ckih2);
return mx53_clocks_init(ckil, osc, ckih1, ckih2);
}
+#endif
"mmc0-slot-power");
if (ret)
pr_warn("failed to request gpio mmc0-slot-power: %d\n", ret);
- mx28_add_mxs_mmc(0, &mx28evk_mmc_pdata[0]);
+ else
+ mx28_add_mxs_mmc(0, &mx28evk_mmc_pdata[0]);
ret = gpio_request_one(MX28EVK_MMC1_SLOT_POWER, GPIOF_OUT_INIT_LOW,
"mmc1-slot-power");
else
mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]);
- mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]);
mx28_add_rtc_stmp3xxx();
gpio_led_register_device(0, &mx28evk_led_data);
#define UART_SHIFT 2
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rv, =PHYS_TO_IO(PICOXCELL_UART1_BASE)
ldr \rp, =PICOXCELL_UART1_BASE
.endm
#
# Common objects
-obj-y := timer.o console.o clock.o pm_runtime.o
+obj-y := timer.o console.o clock.o
# CPU objects
obj-$(CONFIG_ARCH_SH7367) += setup-sh7367.o clock-sh7367.o intc-sh7367.o
/* enable MMCIF */
gpio_request(GPIO_FN_MMCCLK0, NULL);
gpio_request(GPIO_FN_MMCCMD0_PU, NULL);
- gpio_request(GPIO_FN_MMCD0_0, NULL);
- gpio_request(GPIO_FN_MMCD0_1, NULL);
- gpio_request(GPIO_FN_MMCD0_2, NULL);
- gpio_request(GPIO_FN_MMCD0_3, NULL);
- gpio_request(GPIO_FN_MMCD0_4, NULL);
- gpio_request(GPIO_FN_MMCD0_5, NULL);
- gpio_request(GPIO_FN_MMCD0_6, NULL);
- gpio_request(GPIO_FN_MMCD0_7, NULL);
+ gpio_request(GPIO_FN_MMCD0_0_PU, NULL);
+ gpio_request(GPIO_FN_MMCD0_1_PU, NULL);
+ gpio_request(GPIO_FN_MMCD0_2_PU, NULL);
+ gpio_request(GPIO_FN_MMCD0_3_PU, NULL);
+ gpio_request(GPIO_FN_MMCD0_4_PU, NULL);
+ gpio_request(GPIO_FN_MMCD0_5_PU, NULL);
+ gpio_request(GPIO_FN_MMCD0_6_PU, NULL);
+ gpio_request(GPIO_FN_MMCD0_7_PU, NULL);
gpio_request(GPIO_PORT208, NULL); /* Reset */
gpio_direction_output(GPIO_PORT208, 1);
static struct resource nor_flash_resources[] = {
[0] = {
.start = 0x20000000, /* CS0 shadow instead of regular CS0 */
- .end = 0x28000000 - 1, /* needed by USB MASK ROM boot */
+ .end = 0x28000000 - 1, /* needed by USB MASK ROM boot */
.flags = IORESOURCE_MEM,
}
};
#include <asm/hardware/cache-l2x0.h>
#include <asm/traps.h>
+/* SMSC 9220 */
static struct resource smsc9220_resources[] = {
[0] = {
.start = 0x14000000, /* CS5A */
.num_resources = ARRAY_SIZE(smsc9220_resources),
};
+/* KEYSC */
static struct sh_keysc_info keysc_platdata = {
.mode = SH_KEYSC_MODE_6,
.scan_timing = 3,
},
};
+/* GPIO KEY */
#define GPIO_KEY(c, g, d) { .code = c, .gpio = g, .desc = d, .active_low = 1 }
static struct gpio_keys_button gpio_buttons[] = {
},
};
+/* GPIO LED */
#define GPIO_LED(n, g) { .name = n, .gpio = g }
static struct gpio_led gpio_leds[] = {
},
};
+/* MMCIF */
static struct resource mmcif_resources[] = {
[0] = {
.name = "MMCIF",
.resource = mmcif_resources,
};
+/* SDHI0 */
static struct sh_mobile_sdhi_info sdhi0_info = {
.tmio_caps = MMC_CAP_SD_HIGHSPEED,
.tmio_flags = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT,
},
};
+/* SDHI1 */
static struct sh_mobile_sdhi_info sdhi1_info = {
.tmio_caps = MMC_CAP_NONREMOVABLE | MMC_CAP_SDIO_IRQ,
.tmio_flags = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT,
.disable = fsidiv_disable,
};
-static struct clk_mapping sh7372_fsidiva_clk_mapping = {
+static struct clk_mapping fsidiva_clk_mapping = {
.phys = FSIDIVA,
.len = 8,
};
struct clk sh7372_fsidiva_clk = {
.ops = &fsidiv_clk_ops,
.parent = &div6_reparent_clks[DIV6_FSIA], /* late install */
- .mapping = &sh7372_fsidiva_clk_mapping,
+ .mapping = &fsidiva_clk_mapping,
};
-static struct clk_mapping sh7372_fsidivb_clk_mapping = {
+static struct clk_mapping fsidivb_clk_mapping = {
.phys = FSIDIVB,
.len = 8,
};
struct clk sh7372_fsidivb_clk = {
.ops = &fsidiv_clk_ops,
.parent = &div6_reparent_clks[DIV6_FSIB], /* late install */
- .mapping = &sh7372_fsidivb_clk_mapping,
+ .mapping = &fsidivb_clk_mapping,
};
static struct clk *late_main_clks[] = {
};
static int shmobile_cpuidle_enter(struct cpuidle_device *dev,
- struct cpuidle_state *state)
+ struct cpuidle_driver *drv,
+ int index)
{
ktime_t before, after;
- int requested_state = state - &dev->states[0];
- dev->last_state = &dev->states[requested_state];
before = ktime_get();
local_irq_disable();
local_fiq_disable();
- shmobile_cpuidle_modes[requested_state]();
+ shmobile_cpuidle_modes[index]();
local_irq_enable();
local_fiq_enable();
after = ktime_get();
- return ktime_to_ns(ktime_sub(after, before)) >> 10;
+ dev->last_residency = ktime_to_ns(ktime_sub(after, before)) >> 10;
+
+ return index;
}
static struct cpuidle_device shmobile_cpuidle_dev;
static struct cpuidle_driver shmobile_cpuidle_driver = {
.name = "shmobile_cpuidle",
.owner = THIS_MODULE,
+ .states[0] = {
+ .name = "C1",
+ .desc = "WFI",
+ .exit_latency = 1,
+ .target_residency = 1 * 2,
+ .flags = CPUIDLE_FLAG_TIME_VALID,
+ },
+ .safe_state_index = 0, /* C1 */
+ .state_count = 1,
};
-void (*shmobile_cpuidle_setup)(struct cpuidle_device *dev);
+void (*shmobile_cpuidle_setup)(struct cpuidle_driver *drv);
static int shmobile_cpuidle_init(void)
{
struct cpuidle_device *dev = &shmobile_cpuidle_dev;
- struct cpuidle_state *state;
+ struct cpuidle_driver *drv = &shmobile_cpuidle_driver;
int i;
- cpuidle_register_driver(&shmobile_cpuidle_driver);
-
- for (i = 0; i < CPUIDLE_STATE_MAX; i++) {
- dev->states[i].name[0] = '\0';
- dev->states[i].desc[0] = '\0';
- dev->states[i].enter = shmobile_cpuidle_enter;
- }
-
- i = CPUIDLE_DRIVER_STATE_START;
-
- state = &dev->states[i++];
- snprintf(state->name, CPUIDLE_NAME_LEN, "C1");
- strncpy(state->desc, "WFI", CPUIDLE_DESC_LEN);
- state->exit_latency = 1;
- state->target_residency = 1 * 2;
- state->power_usage = 3;
- state->flags = 0;
- state->flags |= CPUIDLE_FLAG_TIME_VALID;
-
- dev->safe_state = state;
- dev->state_count = i;
+ for (i = 0; i < CPUIDLE_STATE_MAX; i++)
+ drv->states[i].enter = shmobile_cpuidle_enter;
if (shmobile_cpuidle_setup)
- shmobile_cpuidle_setup(dev);
+ shmobile_cpuidle_setup(drv);
+
+ cpuidle_register_driver(drv);
+ dev->state_count = drv->state_count;
cpuidle_register_device(dev);
return 0;
extern void shmobile_handle_irq_intc(struct pt_regs *);
extern void shmobile_handle_irq_gic(struct pt_regs *);
extern struct platform_suspend_ops shmobile_suspend_ops;
-struct cpuidle_device;
+struct cpuidle_driver;
extern void (*shmobile_cpuidle_modes[])(void);
-extern void (*shmobile_cpuidle_setup)(struct cpuidle_device *dev);
+extern void (*shmobile_cpuidle_setup)(struct cpuidle_driver *drv);
extern void sh7367_init_irq(void);
extern void sh7367_add_early_devices(void);
GPIO_FN_SDHICMD2_PU,
GPIO_FN_MMCCMD0_PU,
GPIO_FN_MMCCMD1_PU,
+ GPIO_FN_MMCD0_0_PU,
+ GPIO_FN_MMCD0_1_PU,
+ GPIO_FN_MMCD0_2_PU,
+ GPIO_FN_MMCD0_3_PU,
+ GPIO_FN_MMCD0_4_PU,
+ GPIO_FN_MMCD0_5_PU,
+ GPIO_FN_MMCD0_6_PU,
+ GPIO_FN_MMCD0_7_PU,
GPIO_FN_FSIACK_PU,
GPIO_FN_FSIAILR_PU,
GPIO_FN_FSIAIBT_PU,
#include <linux/gpio.h>
#include <mach/sh7367.h>
-#define _1(fn, pfx, sfx) fn(pfx, sfx)
-
-#define _10(fn, pfx, sfx) \
- _1(fn, pfx##0, sfx), _1(fn, pfx##1, sfx), \
- _1(fn, pfx##2, sfx), _1(fn, pfx##3, sfx), \
- _1(fn, pfx##4, sfx), _1(fn, pfx##5, sfx), \
- _1(fn, pfx##6, sfx), _1(fn, pfx##7, sfx), \
- _1(fn, pfx##8, sfx), _1(fn, pfx##9, sfx)
-
-#define _90(fn, pfx, sfx) \
- _10(fn, pfx##1, sfx), _10(fn, pfx##2, sfx), \
- _10(fn, pfx##3, sfx), _10(fn, pfx##4, sfx), \
- _10(fn, pfx##5, sfx), _10(fn, pfx##6, sfx), \
- _10(fn, pfx##7, sfx), _10(fn, pfx##8, sfx), \
- _10(fn, pfx##9, sfx)
-
-#define _273(fn, pfx, sfx) \
- _10(fn, pfx, sfx), _90(fn, pfx, sfx), \
- _10(fn, pfx##10, sfx), _90(fn, pfx##1, sfx), \
- _10(fn, pfx##20, sfx), _10(fn, pfx##21, sfx), \
- _10(fn, pfx##22, sfx), _10(fn, pfx##23, sfx), \
- _10(fn, pfx##24, sfx), _10(fn, pfx##25, sfx), \
- _10(fn, pfx##26, sfx), _1(fn, pfx##270, sfx), \
- _1(fn, pfx##271, sfx), _1(fn, pfx##272, sfx)
-
-#define _PORT(pfx, sfx) pfx##_##sfx
-#define PORT_273(str) _273(_PORT, PORT, str)
+#define CPU_ALL_PORT(fn, pfx, sfx) \
+ PORT_10(fn, pfx, sfx), PORT_90(fn, pfx, sfx), \
+ PORT_10(fn, pfx##10, sfx), PORT_90(fn, pfx##1, sfx), \
+ PORT_10(fn, pfx##20, sfx), PORT_10(fn, pfx##21, sfx), \
+ PORT_10(fn, pfx##22, sfx), PORT_10(fn, pfx##23, sfx), \
+ PORT_10(fn, pfx##24, sfx), PORT_10(fn, pfx##25, sfx), \
+ PORT_10(fn, pfx##26, sfx), PORT_1(fn, pfx##270, sfx), \
+ PORT_1(fn, pfx##271, sfx), PORT_1(fn, pfx##272, sfx)
enum {
PINMUX_RESERVED = 0,
PINMUX_DATA_BEGIN,
- PORT_273(DATA), /* PORT0_DATA -> PORT272_DATA */
+ PORT_ALL(DATA), /* PORT0_DATA -> PORT272_DATA */
PINMUX_DATA_END,
PINMUX_INPUT_BEGIN,
- PORT_273(IN), /* PORT0_IN -> PORT272_IN */
+ PORT_ALL(IN), /* PORT0_IN -> PORT272_IN */
PINMUX_INPUT_END,
PINMUX_INPUT_PULLUP_BEGIN,
- PORT_273(IN_PU), /* PORT0_IN_PU -> PORT272_IN_PU */
+ PORT_ALL(IN_PU), /* PORT0_IN_PU -> PORT272_IN_PU */
PINMUX_INPUT_PULLUP_END,
PINMUX_INPUT_PULLDOWN_BEGIN,
- PORT_273(IN_PD), /* PORT0_IN_PD -> PORT272_IN_PD */
+ PORT_ALL(IN_PD), /* PORT0_IN_PD -> PORT272_IN_PD */
PINMUX_INPUT_PULLDOWN_END,
PINMUX_OUTPUT_BEGIN,
- PORT_273(OUT), /* PORT0_OUT -> PORT272_OUT */
+ PORT_ALL(OUT), /* PORT0_OUT -> PORT272_OUT */
PINMUX_OUTPUT_END,
PINMUX_FUNCTION_BEGIN,
- PORT_273(FN_IN), /* PORT0_FN_IN -> PORT272_FN_IN */
- PORT_273(FN_OUT), /* PORT0_FN_OUT -> PORT272_FN_OUT */
- PORT_273(FN0), /* PORT0_FN0 -> PORT272_FN0 */
- PORT_273(FN1), /* PORT0_FN1 -> PORT272_FN1 */
- PORT_273(FN2), /* PORT0_FN2 -> PORT272_FN2 */
- PORT_273(FN3), /* PORT0_FN3 -> PORT272_FN3 */
- PORT_273(FN4), /* PORT0_FN4 -> PORT272_FN4 */
- PORT_273(FN5), /* PORT0_FN5 -> PORT272_FN5 */
- PORT_273(FN6), /* PORT0_FN6 -> PORT272_FN6 */
- PORT_273(FN7), /* PORT0_FN7 -> PORT272_FN7 */
+ PORT_ALL(FN_IN), /* PORT0_FN_IN -> PORT272_FN_IN */
+ PORT_ALL(FN_OUT), /* PORT0_FN_OUT -> PORT272_FN_OUT */
+ PORT_ALL(FN0), /* PORT0_FN0 -> PORT272_FN0 */
+ PORT_ALL(FN1), /* PORT0_FN1 -> PORT272_FN1 */
+ PORT_ALL(FN2), /* PORT0_FN2 -> PORT272_FN2 */
+ PORT_ALL(FN3), /* PORT0_FN3 -> PORT272_FN3 */
+ PORT_ALL(FN4), /* PORT0_FN4 -> PORT272_FN4 */
+ PORT_ALL(FN5), /* PORT0_FN5 -> PORT272_FN5 */
+ PORT_ALL(FN6), /* PORT0_FN6 -> PORT272_FN6 */
+ PORT_ALL(FN7), /* PORT0_FN7 -> PORT272_FN7 */
MSELBCR_MSEL2_1, MSELBCR_MSEL2_0,
PINMUX_FUNCTION_END,
PINMUX_MARK_END,
};
-#define PORT_DATA_I(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_IN)
-
-#define PORT_DATA_I_PD(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_IN, PORT##nr##_IN_PD)
-
-#define PORT_DATA_I_PU(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_IN, PORT##nr##_IN_PU)
-
-#define PORT_DATA_I_PU_PD(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
-
-#define PORT_DATA_O(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT)
-
-#define PORT_DATA_IO(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
- PORT##nr##_IN)
-
-#define PORT_DATA_IO_PD(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
- PORT##nr##_IN, PORT##nr##_IN_PD)
-
-#define PORT_DATA_IO_PU(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
- PORT##nr##_IN, PORT##nr##_IN_PU)
-
-#define PORT_DATA_IO_PU_PD(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
- PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
-
-
static pinmux_enum_t pinmux_data[] = {
/* specify valid pin states for each pin in GPIO mode */
PINMUX_DATA(DIVLOCK_MARK, PORT272_FN1),
};
-#define _GPIO_PORT(pfx, sfx) PINMUX_GPIO(GPIO_PORT##pfx, PORT##pfx##_DATA)
-#define GPIO_PORT_273() _273(_GPIO_PORT, , unused)
-#define GPIO_FN(str) PINMUX_GPIO(GPIO_FN_##str, str##_MARK)
-
static struct pinmux_gpio pinmux_gpios[] = {
/* 49-1 -> 49-6 (GPIO) */
- GPIO_PORT_273(),
+ GPIO_PORT_ALL(),
/* Special Pull-up / Pull-down Functions */
GPIO_FN(PORT48_KEYIN0_PU), GPIO_FN(PORT49_KEYIN1_PU),
GPIO_FN(DIVLOCK),
};
-/* helper for top 4 bits in PORTnCR */
-#define PCRH(in, in_pd, in_pu, out) \
- 0, (out), (in), 0, \
- 0, 0, 0, 0, \
- 0, 0, (in_pd), 0, \
- 0, 0, (in_pu), 0
-
-#define PORTCR(nr, reg) \
- { PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) { \
- PCRH(PORT##nr##_IN, PORT##nr##_IN_PD, \
- PORT##nr##_IN_PU, PORT##nr##_OUT), \
- PORT##nr##_FN0, PORT##nr##_FN1, PORT##nr##_FN2, \
- PORT##nr##_FN3, PORT##nr##_FN4, PORT##nr##_FN5, \
- PORT##nr##_FN6, PORT##nr##_FN7 } \
- }
-
static struct pinmux_cfg_reg pinmux_config_regs[] = {
PORTCR(0, 0xe6050000), /* PORT0CR */
PORTCR(1, 0xe6050001), /* PORT1CR */
#include <linux/gpio.h>
#include <mach/sh7372.h>
-#define _1(fn, pfx, sfx) fn(pfx, sfx)
-
-#define _10(fn, pfx, sfx) \
- _1(fn, pfx##0, sfx), _1(fn, pfx##1, sfx), \
- _1(fn, pfx##2, sfx), _1(fn, pfx##3, sfx), \
- _1(fn, pfx##4, sfx), _1(fn, pfx##5, sfx), \
- _1(fn, pfx##6, sfx), _1(fn, pfx##7, sfx), \
- _1(fn, pfx##8, sfx), _1(fn, pfx##9, sfx)
-
-#define _80(fn, pfx, sfx) \
- _10(fn, pfx##1, sfx), _10(fn, pfx##2, sfx), \
- _10(fn, pfx##3, sfx), _10(fn, pfx##4, sfx), \
- _10(fn, pfx##5, sfx), _10(fn, pfx##6, sfx), \
- _10(fn, pfx##7, sfx), _10(fn, pfx##8, sfx)
-
-#define _190(fn, pfx, sfx) \
- _10(fn, pfx, sfx), _80(fn, pfx, sfx), _10(fn, pfx##9, sfx), \
- _10(fn, pfx##10, sfx), _80(fn, pfx##1, sfx), _1(fn, pfx##190, sfx)
-
-#define _PORT(pfx, sfx) pfx##_##sfx
-#define PORT_ALL(str) _190(_PORT, PORT, str)
+#define CPU_ALL_PORT(fn, pfx, sfx) \
+ PORT_10(fn, pfx, sfx), PORT_90(fn, pfx, sfx), \
+ PORT_10(fn, pfx##10, sfx), PORT_10(fn, pfx##11, sfx), \
+ PORT_10(fn, pfx##12, sfx), PORT_10(fn, pfx##13, sfx), \
+ PORT_10(fn, pfx##14, sfx), PORT_10(fn, pfx##15, sfx), \
+ PORT_10(fn, pfx##16, sfx), PORT_10(fn, pfx##17, sfx), \
+ PORT_10(fn, pfx##18, sfx), PORT_1(fn, pfx##190, sfx)
enum {
PINMUX_RESERVED = 0,
PINMUX_MARK_END,
};
-/* PORT_DATA_I_PD(nr) */
-#define _I___D(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_IN, PORT##nr##_IN_PD)
-
-/* PORT_DATA_I_PU(nr) */
-#define _I__U_(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_IN, PORT##nr##_IN_PU)
-
-/* PORT_DATA_I_PU_PD(nr) */
-#define _I__UD(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
-
-/* PORT_DATA_O(nr) */
-#define __O___(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT)
-
-/* PORT_DATA_IO(nr) */
-#define _IO___(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
- PORT##nr##_IN)
-
-/* PORT_DATA_IO_PD(nr) */
-#define _IO__D(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
- PORT##nr##_IN, PORT##nr##_IN_PD)
-
-/* PORT_DATA_IO_PU(nr) */
-#define _IO_U_(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
- PORT##nr##_IN, PORT##nr##_IN_PU)
-
-/* PORT_DATA_IO_PU_PD(nr) */
-#define _IO_UD(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
- PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
-
-
static pinmux_enum_t pinmux_data[] = {
/* specify valid pin states for each pin in GPIO mode */
-
- _IO__D(0), _IO__D(1), __O___(2), _I___D(3), _I___D(4),
- _I___D(5), _IO_UD(6), _I___D(7), _IO__D(8), __O___(9),
-
- __O___(10), __O___(11), _IO_UD(12), _IO__D(13), _IO__D(14),
- __O___(15), _IO__D(16), _IO__D(17), _I___D(18), _IO___(19),
-
- _IO___(20), _IO___(21), _IO___(22), _IO___(23), _IO___(24),
- _IO___(25), _IO___(26), _IO___(27), _IO___(28), _IO___(29),
-
- _IO___(30), _IO___(31), _IO___(32), _IO___(33), _IO___(34),
- _IO___(35), _IO___(36), _IO___(37), _IO___(38), _IO___(39),
-
- _IO___(40), _IO___(41), _IO___(42), _IO___(43), _IO___(44),
- _IO___(45), _IO_U_(46), _IO_U_(47), _IO_U_(48), _IO_U_(49),
-
- _IO_U_(50), _IO_U_(51), _IO_U_(52), _IO_U_(53), _IO_U_(54),
- _IO_U_(55), _IO_U_(56), _IO_U_(57), _IO_U_(58), _IO_U_(59),
-
- _IO_U_(60), _IO_U_(61), _IO___(62), __O___(63), __O___(64),
- _IO_U_(65), __O___(66), _IO_U_(67), __O___(68), _IO___(69), /*66?*/
-
- _IO___(70), _IO___(71), __O___(72), _I__U_(73), _I__UD(74),
- _IO_UD(75), _IO_UD(76), _IO_UD(77), _IO_UD(78), _IO_UD(79),
-
- _IO_UD(80), _IO_UD(81), _IO_UD(82), _IO_UD(83), _IO_UD(84),
- _IO_UD(85), _IO_UD(86), _IO_UD(87), _IO_UD(88), _IO_UD(89),
-
- _IO_UD(90), _IO_UD(91), _IO_UD(92), _IO_UD(93), _IO_UD(94),
- _IO_UD(95), _IO_U_(96), _IO_UD(97), _IO_UD(98), __O___(99), /*99?*/
-
- _IO__D(100), _IO__D(101), _IO__D(102), _IO__D(103), _IO__D(104),
- _IO__D(105), _IO_U_(106), _IO_U_(107), _IO_U_(108), _IO_U_(109),
-
- _IO_U_(110), _IO_U_(111), _IO__D(112), _IO__D(113), _IO_U_(114),
- _IO_U_(115), _IO_U_(116), _IO_U_(117), _IO_U_(118), _IO_U_(119),
-
- _IO_U_(120), _IO__D(121), _IO__D(122), _IO__D(123), _IO__D(124),
- _IO__D(125), _IO__D(126), _IO__D(127), _IO__D(128), _IO_UD(129),
-
- _IO_UD(130), _IO_UD(131), _IO_UD(132), _IO_UD(133), _IO_UD(134),
- _IO_UD(135), _IO__D(136), _IO__D(137), _IO__D(138), _IO__D(139),
-
- _IO__D(140), _IO__D(141), _IO__D(142), _IO_UD(143), _IO__D(144),
- _IO__D(145), _IO__D(146), _IO__D(147), _IO__D(148), _IO__D(149),
-
- _IO__D(150), _IO__D(151), _IO_UD(152), _I___D(153), _IO_UD(154),
- _I___D(155), _IO__D(156), _IO__D(157), _I___D(158), _IO__D(159),
-
- __O___(160), _IO__D(161), _IO__D(162), _IO__D(163), _I___D(164),
- _IO__D(165), _I___D(166), _I___D(167), _I___D(168), _I___D(169),
-
- _I___D(170), __O___(171), _IO_UD(172), _IO_UD(173), _IO_UD(174),
- _IO_UD(175), _IO_UD(176), _IO_UD(177), _IO_UD(178), __O___(179),
-
- _IO_UD(180), _IO_UD(181), _IO_UD(182), _IO_UD(183), _IO_UD(184),
- __O___(185), _IO_UD(186), _IO_UD(187), _IO_UD(188), _IO_UD(189),
-
- _IO_UD(190),
+ PORT_DATA_IO_PD(0), PORT_DATA_IO_PD(1),
+ PORT_DATA_O(2), PORT_DATA_I_PD(3),
+ PORT_DATA_I_PD(4), PORT_DATA_I_PD(5),
+ PORT_DATA_IO_PU_PD(6), PORT_DATA_I_PD(7),
+ PORT_DATA_IO_PD(8), PORT_DATA_O(9),
+
+ PORT_DATA_O(10), PORT_DATA_O(11),
+ PORT_DATA_IO_PU_PD(12), PORT_DATA_IO_PD(13),
+ PORT_DATA_IO_PD(14), PORT_DATA_O(15),
+ PORT_DATA_IO_PD(16), PORT_DATA_IO_PD(17),
+ PORT_DATA_I_PD(18), PORT_DATA_IO(19),
+
+ PORT_DATA_IO(20), PORT_DATA_IO(21),
+ PORT_DATA_IO(22), PORT_DATA_IO(23),
+ PORT_DATA_IO(24), PORT_DATA_IO(25),
+ PORT_DATA_IO(26), PORT_DATA_IO(27),
+ PORT_DATA_IO(28), PORT_DATA_IO(29),
+
+ PORT_DATA_IO(30), PORT_DATA_IO(31),
+ PORT_DATA_IO(32), PORT_DATA_IO(33),
+ PORT_DATA_IO(34), PORT_DATA_IO(35),
+ PORT_DATA_IO(36), PORT_DATA_IO(37),
+ PORT_DATA_IO(38), PORT_DATA_IO(39),
+
+ PORT_DATA_IO(40), PORT_DATA_IO(41),
+ PORT_DATA_IO(42), PORT_DATA_IO(43),
+ PORT_DATA_IO(44), PORT_DATA_IO(45),
+ PORT_DATA_IO_PU(46), PORT_DATA_IO_PU(47),
+ PORT_DATA_IO_PU(48), PORT_DATA_IO_PU(49),
+
+ PORT_DATA_IO_PU(50), PORT_DATA_IO_PU(51),
+ PORT_DATA_IO_PU(52), PORT_DATA_IO_PU(53),
+ PORT_DATA_IO_PU(54), PORT_DATA_IO_PU(55),
+ PORT_DATA_IO_PU(56), PORT_DATA_IO_PU(57),
+ PORT_DATA_IO_PU(58), PORT_DATA_IO_PU(59),
+
+ PORT_DATA_IO_PU(60), PORT_DATA_IO_PU(61),
+ PORT_DATA_IO(62), PORT_DATA_O(63),
+ PORT_DATA_O(64), PORT_DATA_IO_PU(65),
+ PORT_DATA_O(66), PORT_DATA_IO_PU(67), /*66?*/
+ PORT_DATA_O(68), PORT_DATA_IO(69),
+
+ PORT_DATA_IO(70), PORT_DATA_IO(71),
+ PORT_DATA_O(72), PORT_DATA_I_PU(73),
+ PORT_DATA_I_PU_PD(74), PORT_DATA_IO_PU_PD(75),
+ PORT_DATA_IO_PU_PD(76), PORT_DATA_IO_PU_PD(77),
+ PORT_DATA_IO_PU_PD(78), PORT_DATA_IO_PU_PD(79),
+
+ PORT_DATA_IO_PU_PD(80), PORT_DATA_IO_PU_PD(81),
+ PORT_DATA_IO_PU_PD(82), PORT_DATA_IO_PU_PD(83),
+ PORT_DATA_IO_PU_PD(84), PORT_DATA_IO_PU_PD(85),
+ PORT_DATA_IO_PU_PD(86), PORT_DATA_IO_PU_PD(87),
+ PORT_DATA_IO_PU_PD(88), PORT_DATA_IO_PU_PD(89),
+
+ PORT_DATA_IO_PU_PD(90), PORT_DATA_IO_PU_PD(91),
+ PORT_DATA_IO_PU_PD(92), PORT_DATA_IO_PU_PD(93),
+ PORT_DATA_IO_PU_PD(94), PORT_DATA_IO_PU_PD(95),
+ PORT_DATA_IO_PU(96), PORT_DATA_IO_PU_PD(97),
+ PORT_DATA_IO_PU_PD(98), PORT_DATA_O(99), /*99?*/
+
+ PORT_DATA_IO_PD(100), PORT_DATA_IO_PD(101),
+ PORT_DATA_IO_PD(102), PORT_DATA_IO_PD(103),
+ PORT_DATA_IO_PD(104), PORT_DATA_IO_PD(105),
+ PORT_DATA_IO_PU(106), PORT_DATA_IO_PU(107),
+ PORT_DATA_IO_PU(108), PORT_DATA_IO_PU(109),
+
+ PORT_DATA_IO_PU(110), PORT_DATA_IO_PU(111),
+ PORT_DATA_IO_PD(112), PORT_DATA_IO_PD(113),
+ PORT_DATA_IO_PU(114), PORT_DATA_IO_PU(115),
+ PORT_DATA_IO_PU(116), PORT_DATA_IO_PU(117),
+ PORT_DATA_IO_PU(118), PORT_DATA_IO_PU(119),
+
+ PORT_DATA_IO_PU(120), PORT_DATA_IO_PD(121),
+ PORT_DATA_IO_PD(122), PORT_DATA_IO_PD(123),
+ PORT_DATA_IO_PD(124), PORT_DATA_IO_PD(125),
+ PORT_DATA_IO_PD(126), PORT_DATA_IO_PD(127),
+ PORT_DATA_IO_PD(128), PORT_DATA_IO_PU_PD(129),
+
+ PORT_DATA_IO_PU_PD(130), PORT_DATA_IO_PU_PD(131),
+ PORT_DATA_IO_PU_PD(132), PORT_DATA_IO_PU_PD(133),
+ PORT_DATA_IO_PU_PD(134), PORT_DATA_IO_PU_PD(135),
+ PORT_DATA_IO_PD(136), PORT_DATA_IO_PD(137),
+ PORT_DATA_IO_PD(138), PORT_DATA_IO_PD(139),
+
+ PORT_DATA_IO_PD(140), PORT_DATA_IO_PD(141),
+ PORT_DATA_IO_PD(142), PORT_DATA_IO_PU_PD(143),
+ PORT_DATA_IO_PD(144), PORT_DATA_IO_PD(145),
+ PORT_DATA_IO_PD(146), PORT_DATA_IO_PD(147),
+ PORT_DATA_IO_PD(148), PORT_DATA_IO_PD(149),
+
+ PORT_DATA_IO_PD(150), PORT_DATA_IO_PD(151),
+ PORT_DATA_IO_PU_PD(152), PORT_DATA_I_PD(153),
+ PORT_DATA_IO_PU_PD(154), PORT_DATA_I_PD(155),
+ PORT_DATA_IO_PD(156), PORT_DATA_IO_PD(157),
+ PORT_DATA_I_PD(158), PORT_DATA_IO_PD(159),
+
+ PORT_DATA_O(160), PORT_DATA_IO_PD(161),
+ PORT_DATA_IO_PD(162), PORT_DATA_IO_PD(163),
+ PORT_DATA_I_PD(164), PORT_DATA_IO_PD(165),
+ PORT_DATA_I_PD(166), PORT_DATA_I_PD(167),
+ PORT_DATA_I_PD(168), PORT_DATA_I_PD(169),
+
+ PORT_DATA_I_PD(170), PORT_DATA_O(171),
+ PORT_DATA_IO_PU_PD(172), PORT_DATA_IO_PU_PD(173),
+ PORT_DATA_IO_PU_PD(174), PORT_DATA_IO_PU_PD(175),
+ PORT_DATA_IO_PU_PD(176), PORT_DATA_IO_PU_PD(177),
+ PORT_DATA_IO_PU_PD(178), PORT_DATA_O(179),
+
+ PORT_DATA_IO_PU_PD(180), PORT_DATA_IO_PU_PD(181),
+ PORT_DATA_IO_PU_PD(182), PORT_DATA_IO_PU_PD(183),
+ PORT_DATA_IO_PU_PD(184), PORT_DATA_O(185),
+ PORT_DATA_IO_PU_PD(186), PORT_DATA_IO_PU_PD(187),
+ PORT_DATA_IO_PU_PD(188), PORT_DATA_IO_PU_PD(189),
+
+ PORT_DATA_IO_PU_PD(190),
/* IRQ */
PINMUX_DATA(IRQ0_6_MARK, PORT6_FN0, MSEL1CR_0_0),
PINMUX_DATA(MFIv4_MARK, MSEL4CR_6_1),
};
-#define _GPIO_PORT(pfx, sfx) PINMUX_GPIO(GPIO_PORT##pfx, PORT##pfx##_DATA)
-#define GPIO_PORT_ALL() _190(_GPIO_PORT, , unused)
-#define GPIO_FN(str) PINMUX_GPIO(GPIO_FN_##str, str##_MARK)
-
static struct pinmux_gpio pinmux_gpios[] = {
/* PORT */
GPIO_FN(SDENC_DV_CLKI),
};
-/* helper for top 4 bits in PORTnCR */
-#define PCRH(in, in_pd, in_pu, out) \
- 0, (out), (in), 0, \
- 0, 0, 0, 0, \
- 0, 0, (in_pd), 0, \
- 0, 0, (in_pu), 0
-
-#define PORTCR(nr, reg) \
- { PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) { \
- PCRH(PORT##nr##_IN, PORT##nr##_IN_PD, \
- PORT##nr##_IN_PU, PORT##nr##_OUT), \
- PORT##nr##_FN0, PORT##nr##_FN1, PORT##nr##_FN2, \
- PORT##nr##_FN3, PORT##nr##_FN4, PORT##nr##_FN5, \
- PORT##nr##_FN6, PORT##nr##_FN7 } \
- }
-
static struct pinmux_cfg_reg pinmux_config_regs[] = {
PORTCR(0, 0xE6051000), /* PORT0CR */
PORTCR(1, 0xE6051001), /* PORT1CR */
#include <linux/gpio.h>
#include <mach/sh7377.h>
-#define _1(fn, pfx, sfx) fn(pfx, sfx)
-
-#define _10(fn, pfx, sfx) \
- _1(fn, pfx##0, sfx), _1(fn, pfx##1, sfx), \
- _1(fn, pfx##2, sfx), _1(fn, pfx##3, sfx), \
- _1(fn, pfx##4, sfx), _1(fn, pfx##5, sfx), \
- _1(fn, pfx##6, sfx), _1(fn, pfx##7, sfx), \
- _1(fn, pfx##8, sfx), _1(fn, pfx##9, sfx)
-
-#define _90(fn, pfx, sfx) \
- _10(fn, pfx##1, sfx), _10(fn, pfx##2, sfx), \
- _10(fn, pfx##3, sfx), _10(fn, pfx##4, sfx), \
- _10(fn, pfx##5, sfx), _10(fn, pfx##6, sfx), \
- _10(fn, pfx##7, sfx), _10(fn, pfx##8, sfx), \
- _10(fn, pfx##9, sfx)
-
-#define _265(fn, pfx, sfx) \
- _10(fn, pfx, sfx), _90(fn, pfx, sfx), \
- _10(fn, pfx##10, sfx), \
- _1(fn, pfx##110, sfx), _1(fn, pfx##111, sfx), \
- _1(fn, pfx##112, sfx), _1(fn, pfx##113, sfx), \
- _1(fn, pfx##114, sfx), _1(fn, pfx##115, sfx), \
- _1(fn, pfx##116, sfx), _1(fn, pfx##117, sfx), \
- _1(fn, pfx##118, sfx), \
- _1(fn, pfx##128, sfx), _1(fn, pfx##129, sfx), \
- _10(fn, pfx##13, sfx), _10(fn, pfx##14, sfx), \
- _10(fn, pfx##15, sfx), \
- _1(fn, pfx##160, sfx), _1(fn, pfx##161, sfx), \
- _1(fn, pfx##162, sfx), _1(fn, pfx##163, sfx), \
- _1(fn, pfx##164, sfx), \
- _1(fn, pfx##192, sfx), _1(fn, pfx##193, sfx), \
- _1(fn, pfx##194, sfx), _1(fn, pfx##195, sfx), \
- _1(fn, pfx##196, sfx), _1(fn, pfx##197, sfx), \
- _1(fn, pfx##198, sfx), _1(fn, pfx##199, sfx), \
- _10(fn, pfx##20, sfx), _10(fn, pfx##21, sfx), \
- _10(fn, pfx##22, sfx), _10(fn, pfx##23, sfx), \
- _10(fn, pfx##24, sfx), _10(fn, pfx##25, sfx), \
- _1(fn, pfx##260, sfx), _1(fn, pfx##261, sfx), \
- _1(fn, pfx##262, sfx), _1(fn, pfx##263, sfx), \
- _1(fn, pfx##264, sfx)
-
-#define _PORT(pfx, sfx) pfx##_##sfx
-#define PORT_265(str) _265(_PORT, PORT, str)
+#define CPU_ALL_PORT(fn, pfx, sfx) \
+ PORT_10(fn, pfx, sfx), PORT_90(fn, pfx, sfx), \
+ PORT_10(fn, pfx##10, sfx), \
+ PORT_1(fn, pfx##110, sfx), PORT_1(fn, pfx##111, sfx), \
+ PORT_1(fn, pfx##112, sfx), PORT_1(fn, pfx##113, sfx), \
+ PORT_1(fn, pfx##114, sfx), PORT_1(fn, pfx##115, sfx), \
+ PORT_1(fn, pfx##116, sfx), PORT_1(fn, pfx##117, sfx), \
+ PORT_1(fn, pfx##118, sfx), \
+ PORT_1(fn, pfx##128, sfx), PORT_1(fn, pfx##129, sfx), \
+ PORT_10(fn, pfx##13, sfx), PORT_10(fn, pfx##14, sfx), \
+ PORT_10(fn, pfx##15, sfx), \
+ PORT_1(fn, pfx##160, sfx), PORT_1(fn, pfx##161, sfx), \
+ PORT_1(fn, pfx##162, sfx), PORT_1(fn, pfx##163, sfx), \
+ PORT_1(fn, pfx##164, sfx), \
+ PORT_1(fn, pfx##192, sfx), PORT_1(fn, pfx##193, sfx), \
+ PORT_1(fn, pfx##194, sfx), PORT_1(fn, pfx##195, sfx), \
+ PORT_1(fn, pfx##196, sfx), PORT_1(fn, pfx##197, sfx), \
+ PORT_1(fn, pfx##198, sfx), PORT_1(fn, pfx##199, sfx), \
+ PORT_10(fn, pfx##20, sfx), PORT_10(fn, pfx##21, sfx), \
+ PORT_10(fn, pfx##22, sfx), PORT_10(fn, pfx##23, sfx), \
+ PORT_10(fn, pfx##24, sfx), PORT_10(fn, pfx##25, sfx), \
+ PORT_1(fn, pfx##260, sfx), PORT_1(fn, pfx##261, sfx), \
+ PORT_1(fn, pfx##262, sfx), PORT_1(fn, pfx##263, sfx), \
+ PORT_1(fn, pfx##264, sfx)
enum {
PINMUX_RESERVED = 0,
PINMUX_DATA_BEGIN,
- PORT_265(DATA), /* PORT0_DATA -> PORT264_DATA */
+ PORT_ALL(DATA), /* PORT0_DATA -> PORT264_DATA */
PINMUX_DATA_END,
PINMUX_INPUT_BEGIN,
- PORT_265(IN), /* PORT0_IN -> PORT264_IN */
+ PORT_ALL(IN), /* PORT0_IN -> PORT264_IN */
PINMUX_INPUT_END,
PINMUX_INPUT_PULLUP_BEGIN,
- PORT_265(IN_PU), /* PORT0_IN_PU -> PORT264_IN_PU */
+ PORT_ALL(IN_PU), /* PORT0_IN_PU -> PORT264_IN_PU */
PINMUX_INPUT_PULLUP_END,
PINMUX_INPUT_PULLDOWN_BEGIN,
- PORT_265(IN_PD), /* PORT0_IN_PD -> PORT264_IN_PD */
+ PORT_ALL(IN_PD), /* PORT0_IN_PD -> PORT264_IN_PD */
PINMUX_INPUT_PULLDOWN_END,
PINMUX_OUTPUT_BEGIN,
- PORT_265(OUT), /* PORT0_OUT -> PORT264_OUT */
+ PORT_ALL(OUT), /* PORT0_OUT -> PORT264_OUT */
PINMUX_OUTPUT_END,
PINMUX_FUNCTION_BEGIN,
- PORT_265(FN_IN), /* PORT0_FN_IN -> PORT264_FN_IN */
- PORT_265(FN_OUT), /* PORT0_FN_OUT -> PORT264_FN_OUT */
- PORT_265(FN0), /* PORT0_FN0 -> PORT264_FN0 */
- PORT_265(FN1), /* PORT0_FN1 -> PORT264_FN1 */
- PORT_265(FN2), /* PORT0_FN2 -> PORT264_FN2 */
- PORT_265(FN3), /* PORT0_FN3 -> PORT264_FN3 */
- PORT_265(FN4), /* PORT0_FN4 -> PORT264_FN4 */
- PORT_265(FN5), /* PORT0_FN5 -> PORT264_FN5 */
- PORT_265(FN6), /* PORT0_FN6 -> PORT264_FN6 */
- PORT_265(FN7), /* PORT0_FN7 -> PORT264_FN7 */
+ PORT_ALL(FN_IN), /* PORT0_FN_IN -> PORT264_FN_IN */
+ PORT_ALL(FN_OUT), /* PORT0_FN_OUT -> PORT264_FN_OUT */
+ PORT_ALL(FN0), /* PORT0_FN0 -> PORT264_FN0 */
+ PORT_ALL(FN1), /* PORT0_FN1 -> PORT264_FN1 */
+ PORT_ALL(FN2), /* PORT0_FN2 -> PORT264_FN2 */
+ PORT_ALL(FN3), /* PORT0_FN3 -> PORT264_FN3 */
+ PORT_ALL(FN4), /* PORT0_FN4 -> PORT264_FN4 */
+ PORT_ALL(FN5), /* PORT0_FN5 -> PORT264_FN5 */
+ PORT_ALL(FN6), /* PORT0_FN6 -> PORT264_FN6 */
+ PORT_ALL(FN7), /* PORT0_FN7 -> PORT264_FN7 */
MSELBCR_MSEL17_1, MSELBCR_MSEL17_0,
MSELBCR_MSEL16_1, MSELBCR_MSEL16_0,
PINMUX_MARK_END,
};
-#define PORT_DATA_I(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_IN)
-
-#define PORT_DATA_I_PD(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_IN, PORT##nr##_IN_PD)
-
-#define PORT_DATA_I_PU(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_IN, PORT##nr##_IN_PU)
-
-#define PORT_DATA_I_PU_PD(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_IN, PORT##nr##_IN_PD, \
- PORT##nr##_IN_PU)
-
-#define PORT_DATA_O(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_OUT)
-
-#define PORT_DATA_IO(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_OUT, PORT##nr##_IN)
-
-#define PORT_DATA_IO_PD(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_OUT, PORT##nr##_IN, \
- PORT##nr##_IN_PD)
-
-#define PORT_DATA_IO_PU(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_OUT, PORT##nr##_IN, \
- PORT##nr##_IN_PU)
-
-#define PORT_DATA_IO_PU_PD(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_OUT, PORT##nr##_IN, \
- PORT##nr##_IN_PD, PORT##nr##_IN_PU)
-
static pinmux_enum_t pinmux_data[] = {
/* specify valid pin states for each pin in GPIO mode */
/* 55-1 (GPIO) */
PINMUX_DATA(RESETOUTS_MARK, PORT264_FN1),
};
-#define _GPIO_PORT(pfx, sfx) PINMUX_GPIO(GPIO_PORT##pfx, PORT##pfx##_DATA)
-#define GPIO_PORT_265() _265(_GPIO_PORT, , unused)
-#define GPIO_FN(str) PINMUX_GPIO(GPIO_FN_##str, str##_MARK)
-
static struct pinmux_gpio pinmux_gpios[] = {
/* 55-1 -> 55-5 (GPIO) */
- GPIO_PORT_265(),
+ GPIO_PORT_ALL(),
/* Special Pull-up / Pull-down Functions */
GPIO_FN(PORT66_KEYIN0_PU), GPIO_FN(PORT67_KEYIN1_PU),
GPIO_FN(RESETOUTS),
};
-/* helper for top 4 bits in PORTnCR */
-#define PCRH(in, in_pd, in_pu, out) \
- 0, (out), (in), 0, \
- 0, 0, 0, 0, \
- 0, 0, (in_pd), 0, \
- 0, 0, (in_pu), 0
-
-#define PORTCR(nr, reg) \
- { PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) { \
- PCRH(PORT##nr##_IN, PORT##nr##_IN_PD, \
- PORT##nr##_IN_PU, PORT##nr##_OUT), \
- PORT##nr##_FN0, PORT##nr##_FN1, \
- PORT##nr##_FN2, PORT##nr##_FN3, \
- PORT##nr##_FN4, PORT##nr##_FN5, \
- PORT##nr##_FN6, PORT##nr##_FN7 } \
- }
-
static struct pinmux_cfg_reg pinmux_config_regs[] = {
PORTCR(0, 0xe6050000), /* PORT0CR */
PORTCR(1, 0xe6050001), /* PORT1CR */
#include <mach/sh73a0.h>
#include <mach/irqs.h>
-#define _1(fn, pfx, sfx) fn(pfx, sfx)
-
-#define _10(fn, pfx, sfx) \
- _1(fn, pfx##0, sfx), _1(fn, pfx##1, sfx), \
- _1(fn, pfx##2, sfx), _1(fn, pfx##3, sfx), \
- _1(fn, pfx##4, sfx), _1(fn, pfx##5, sfx), \
- _1(fn, pfx##6, sfx), _1(fn, pfx##7, sfx), \
- _1(fn, pfx##8, sfx), _1(fn, pfx##9, sfx)
-
-#define _310(fn, pfx, sfx) \
- _10(fn, pfx, sfx), _10(fn, pfx##1, sfx), \
- _10(fn, pfx##2, sfx), _10(fn, pfx##3, sfx), \
- _10(fn, pfx##4, sfx), _10(fn, pfx##5, sfx), \
- _10(fn, pfx##6, sfx), _10(fn, pfx##7, sfx), \
- _10(fn, pfx##8, sfx), _10(fn, pfx##9, sfx), \
- _10(fn, pfx##10, sfx), \
- _1(fn, pfx##110, sfx), _1(fn, pfx##111, sfx), \
- _1(fn, pfx##112, sfx), _1(fn, pfx##113, sfx), \
- _1(fn, pfx##114, sfx), _1(fn, pfx##115, sfx), \
- _1(fn, pfx##116, sfx), _1(fn, pfx##117, sfx), \
- _1(fn, pfx##118, sfx), \
- _1(fn, pfx##128, sfx), _1(fn, pfx##129, sfx), \
- _10(fn, pfx##13, sfx), _10(fn, pfx##14, sfx), \
- _10(fn, pfx##15, sfx), \
- _1(fn, pfx##160, sfx), _1(fn, pfx##161, sfx), \
- _1(fn, pfx##162, sfx), _1(fn, pfx##163, sfx), \
- _1(fn, pfx##164, sfx), \
- _1(fn, pfx##192, sfx), _1(fn, pfx##193, sfx), \
- _1(fn, pfx##194, sfx), _1(fn, pfx##195, sfx), \
- _1(fn, pfx##196, sfx), _1(fn, pfx##197, sfx), \
- _1(fn, pfx##198, sfx), _1(fn, pfx##199, sfx), \
- _10(fn, pfx##20, sfx), _10(fn, pfx##21, sfx), \
- _10(fn, pfx##22, sfx), _10(fn, pfx##23, sfx), \
- _10(fn, pfx##24, sfx), _10(fn, pfx##25, sfx), \
- _10(fn, pfx##26, sfx), _10(fn, pfx##27, sfx), \
- _1(fn, pfx##280, sfx), _1(fn, pfx##281, sfx), \
- _1(fn, pfx##282, sfx), \
- _1(fn, pfx##288, sfx), _1(fn, pfx##289, sfx), \
- _10(fn, pfx##29, sfx), _10(fn, pfx##30, sfx)
-
-#define _PORT(pfx, sfx) pfx##_##sfx
-#define PORT_310(str) _310(_PORT, PORT, str)
+#define CPU_ALL_PORT(fn, pfx, sfx) \
+ PORT_10(fn, pfx, sfx), PORT_10(fn, pfx##1, sfx), \
+ PORT_10(fn, pfx##2, sfx), PORT_10(fn, pfx##3, sfx), \
+ PORT_10(fn, pfx##4, sfx), PORT_10(fn, pfx##5, sfx), \
+ PORT_10(fn, pfx##6, sfx), PORT_10(fn, pfx##7, sfx), \
+ PORT_10(fn, pfx##8, sfx), PORT_10(fn, pfx##9, sfx), \
+ PORT_10(fn, pfx##10, sfx), \
+ PORT_1(fn, pfx##110, sfx), PORT_1(fn, pfx##111, sfx), \
+ PORT_1(fn, pfx##112, sfx), PORT_1(fn, pfx##113, sfx), \
+ PORT_1(fn, pfx##114, sfx), PORT_1(fn, pfx##115, sfx), \
+ PORT_1(fn, pfx##116, sfx), PORT_1(fn, pfx##117, sfx), \
+ PORT_1(fn, pfx##118, sfx), \
+ PORT_1(fn, pfx##128, sfx), PORT_1(fn, pfx##129, sfx), \
+ PORT_10(fn, pfx##13, sfx), PORT_10(fn, pfx##14, sfx), \
+ PORT_10(fn, pfx##15, sfx), \
+ PORT_1(fn, pfx##160, sfx), PORT_1(fn, pfx##161, sfx), \
+ PORT_1(fn, pfx##162, sfx), PORT_1(fn, pfx##163, sfx), \
+ PORT_1(fn, pfx##164, sfx), \
+ PORT_1(fn, pfx##192, sfx), PORT_1(fn, pfx##193, sfx), \
+ PORT_1(fn, pfx##194, sfx), PORT_1(fn, pfx##195, sfx), \
+ PORT_1(fn, pfx##196, sfx), PORT_1(fn, pfx##197, sfx), \
+ PORT_1(fn, pfx##198, sfx), PORT_1(fn, pfx##199, sfx), \
+ PORT_10(fn, pfx##20, sfx), PORT_10(fn, pfx##21, sfx), \
+ PORT_10(fn, pfx##22, sfx), PORT_10(fn, pfx##23, sfx), \
+ PORT_10(fn, pfx##24, sfx), PORT_10(fn, pfx##25, sfx), \
+ PORT_10(fn, pfx##26, sfx), PORT_10(fn, pfx##27, sfx), \
+ PORT_1(fn, pfx##280, sfx), PORT_1(fn, pfx##281, sfx), \
+ PORT_1(fn, pfx##282, sfx), \
+ PORT_1(fn, pfx##288, sfx), PORT_1(fn, pfx##289, sfx), \
+ PORT_10(fn, pfx##29, sfx), PORT_10(fn, pfx##30, sfx)
enum {
PINMUX_RESERVED = 0,
PINMUX_DATA_BEGIN,
- PORT_310(DATA), /* PORT0_DATA -> PORT309_DATA */
+ PORT_ALL(DATA), /* PORT0_DATA -> PORT309_DATA */
PINMUX_DATA_END,
PINMUX_INPUT_BEGIN,
- PORT_310(IN), /* PORT0_IN -> PORT309_IN */
+ PORT_ALL(IN), /* PORT0_IN -> PORT309_IN */
PINMUX_INPUT_END,
PINMUX_INPUT_PULLUP_BEGIN,
- PORT_310(IN_PU), /* PORT0_IN_PU -> PORT309_IN_PU */
+ PORT_ALL(IN_PU), /* PORT0_IN_PU -> PORT309_IN_PU */
PINMUX_INPUT_PULLUP_END,
PINMUX_INPUT_PULLDOWN_BEGIN,
- PORT_310(IN_PD), /* PORT0_IN_PD -> PORT309_IN_PD */
+ PORT_ALL(IN_PD), /* PORT0_IN_PD -> PORT309_IN_PD */
PINMUX_INPUT_PULLDOWN_END,
PINMUX_OUTPUT_BEGIN,
- PORT_310(OUT), /* PORT0_OUT -> PORT309_OUT */
+ PORT_ALL(OUT), /* PORT0_OUT -> PORT309_OUT */
PINMUX_OUTPUT_END,
PINMUX_FUNCTION_BEGIN,
- PORT_310(FN_IN), /* PORT0_FN_IN -> PORT309_FN_IN */
- PORT_310(FN_OUT), /* PORT0_FN_OUT -> PORT309_FN_OUT */
- PORT_310(FN0), /* PORT0_FN0 -> PORT309_FN0 */
- PORT_310(FN1), /* PORT0_FN1 -> PORT309_FN1 */
- PORT_310(FN2), /* PORT0_FN2 -> PORT309_FN2 */
- PORT_310(FN3), /* PORT0_FN3 -> PORT309_FN3 */
- PORT_310(FN4), /* PORT0_FN4 -> PORT309_FN4 */
- PORT_310(FN5), /* PORT0_FN5 -> PORT309_FN5 */
- PORT_310(FN6), /* PORT0_FN6 -> PORT309_FN6 */
- PORT_310(FN7), /* PORT0_FN7 -> PORT309_FN7 */
+ PORT_ALL(FN_IN), /* PORT0_FN_IN -> PORT309_FN_IN */
+ PORT_ALL(FN_OUT), /* PORT0_FN_OUT -> PORT309_FN_OUT */
+ PORT_ALL(FN0), /* PORT0_FN0 -> PORT309_FN0 */
+ PORT_ALL(FN1), /* PORT0_FN1 -> PORT309_FN1 */
+ PORT_ALL(FN2), /* PORT0_FN2 -> PORT309_FN2 */
+ PORT_ALL(FN3), /* PORT0_FN3 -> PORT309_FN3 */
+ PORT_ALL(FN4), /* PORT0_FN4 -> PORT309_FN4 */
+ PORT_ALL(FN5), /* PORT0_FN5 -> PORT309_FN5 */
+ PORT_ALL(FN6), /* PORT0_FN6 -> PORT309_FN6 */
+ PORT_ALL(FN7), /* PORT0_FN7 -> PORT309_FN7 */
MSEL2CR_MSEL19_0, MSEL2CR_MSEL19_1,
MSEL2CR_MSEL18_0, MSEL2CR_MSEL18_1,
SDHICMD2_PU_MARK,
MMCCMD0_PU_MARK,
MMCCMD1_PU_MARK,
+ MMCD0_0_PU_MARK,
+ MMCD0_1_PU_MARK,
+ MMCD0_2_PU_MARK,
+ MMCD0_3_PU_MARK,
+ MMCD0_4_PU_MARK,
+ MMCD0_5_PU_MARK,
+ MMCD0_6_PU_MARK,
+ MMCD0_7_PU_MARK,
FSIBISLD_PU_MARK,
FSIACK_PU_MARK,
FSIAILR_PU_MARK,
PINMUX_MARK_END,
};
-#define PORT_DATA_I(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_IN)
-
-#define PORT_DATA_I_PD(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_IN, PORT##nr##_IN_PD)
-
-#define PORT_DATA_I_PU(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_IN, PORT##nr##_IN_PU)
-
-#define PORT_DATA_I_PU_PD(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_IN, PORT##nr##_IN_PD, \
- PORT##nr##_IN_PU)
-
-#define PORT_DATA_O(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_OUT)
-
-#define PORT_DATA_IO(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_OUT, PORT##nr##_IN)
-
-#define PORT_DATA_IO_PD(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_OUT, PORT##nr##_IN, \
- PORT##nr##_IN_PD)
-
-#define PORT_DATA_IO_PU(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_OUT, PORT##nr##_IN, \
- PORT##nr##_IN_PU)
-
-#define PORT_DATA_IO_PU_PD(nr) \
- PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
- PORT##nr##_OUT, PORT##nr##_IN, \
- PORT##nr##_IN_PD, PORT##nr##_IN_PU)
-
static pinmux_enum_t pinmux_data[] = {
/* specify valid pin states for each pin in GPIO mode */
MSEL4CR_MSEL15_0),
PINMUX_DATA(MMCCMD1_PU_MARK, PORT297_FN2, PORT297_IN_PU,
MSEL4CR_MSEL15_1),
+
+ PINMUX_DATA(MMCD0_0_PU_MARK,
+ PORT271_FN1, PORT271_IN_PU, MSEL4CR_MSEL15_0),
+ PINMUX_DATA(MMCD0_1_PU_MARK,
+ PORT272_FN1, PORT272_IN_PU, MSEL4CR_MSEL15_0),
+ PINMUX_DATA(MMCD0_2_PU_MARK,
+ PORT273_FN1, PORT273_IN_PU, MSEL4CR_MSEL15_0),
+ PINMUX_DATA(MMCD0_3_PU_MARK,
+ PORT274_FN1, PORT274_IN_PU, MSEL4CR_MSEL15_0),
+ PINMUX_DATA(MMCD0_4_PU_MARK,
+ PORT275_FN1, PORT275_IN_PU, MSEL4CR_MSEL15_0),
+ PINMUX_DATA(MMCD0_5_PU_MARK,
+ PORT276_FN1, PORT276_IN_PU, MSEL4CR_MSEL15_0),
+ PINMUX_DATA(MMCD0_6_PU_MARK,
+ PORT277_FN1, PORT277_IN_PU, MSEL4CR_MSEL15_0),
+ PINMUX_DATA(MMCD0_7_PU_MARK,
+ PORT278_FN1, PORT278_IN_PU, MSEL4CR_MSEL15_0),
+
PINMUX_DATA(FSIBISLD_PU_MARK, PORT39_FN1, PORT39_IN_PU),
PINMUX_DATA(FSIACK_PU_MARK, PORT49_FN1, PORT49_IN_PU),
PINMUX_DATA(FSIAILR_PU_MARK, PORT50_FN5, PORT50_IN_PU),
PINMUX_DATA(FSIAISLD_PU_MARK, PORT55_FN1, PORT55_IN_PU),
};
-#define _GPIO_PORT(pfx, sfx) PINMUX_GPIO(GPIO_PORT##pfx, PORT##pfx##_DATA)
-#define GPIO_PORT_310() _310(_GPIO_PORT, , unused)
-#define GPIO_FN(str) PINMUX_GPIO(GPIO_FN_##str, str##_MARK)
-
static struct pinmux_gpio pinmux_gpios[] = {
- GPIO_PORT_310(),
+ GPIO_PORT_ALL(),
/* Table 25-1 (Functions 0-7) */
GPIO_FN(VBUS_0),
GPIO_FN(SDHICMD2_PU),
GPIO_FN(MMCCMD0_PU),
GPIO_FN(MMCCMD1_PU),
+ GPIO_FN(MMCD0_0_PU),
+ GPIO_FN(MMCD0_1_PU),
+ GPIO_FN(MMCD0_2_PU),
+ GPIO_FN(MMCD0_3_PU),
+ GPIO_FN(MMCD0_4_PU),
+ GPIO_FN(MMCD0_5_PU),
+ GPIO_FN(MMCD0_6_PU),
+ GPIO_FN(MMCD0_7_PU),
GPIO_FN(FSIACK_PU),
GPIO_FN(FSIAILR_PU),
GPIO_FN(FSIAIBT_PU),
GPIO_FN(FSIAISLD_PU),
};
-#define PORTCR(nr, reg) \
- { PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) { \
- 0, \
- /*0001*/ PORT##nr##_OUT , \
- /*0010*/ PORT##nr##_IN , 0, 0, 0, 0, 0, 0, 0, \
- /*1010*/ PORT##nr##_IN_PD, 0, 0, 0, \
- /*1110*/ PORT##nr##_IN_PU, 0, \
- PORT##nr##_FN0, PORT##nr##_FN1, PORT##nr##_FN2, \
- PORT##nr##_FN3, PORT##nr##_FN4, PORT##nr##_FN5, \
- PORT##nr##_FN6, PORT##nr##_FN7, 0, 0, 0, 0, 0, 0, 0, 0 } \
- }
-
static struct pinmux_cfg_reg pinmux_config_regs[] = {
PORTCR(0, 0xe6050000), /* PORT0CR */
PORTCR(1, 0xe6050001), /* PORT1CR */
#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/bitrev.h>
+#include <linux/console.h>
#include <asm/system.h>
#include <asm/io.h>
#include <asm/tlbflush.h>
return 0;
}
-static int pd_power_up(struct generic_pm_domain *genpd)
+static int __pd_power_up(struct sh7372_pm_domain *sh7372_pd, bool do_resume)
{
- struct sh7372_pm_domain *sh7372_pd = to_sh7372_pd(genpd);
unsigned int mask = 1 << sh7372_pd->bit_shift;
unsigned int retry_count;
int ret = 0;
for (retry_count = 2 * PSTR_RETRIES; retry_count; retry_count--) {
if (!(__raw_readl(SWUCR) & mask))
- goto out;
+ break;
if (retry_count > PSTR_RETRIES)
udelay(PSTR_DELAY_US);
else
cpu_relax();
}
- if (__raw_readl(SWUCR) & mask)
+ if (!retry_count)
ret = -EIO;
if (!sh7372_pd->no_debug)
mask, __raw_readl(PSTR));
out:
- if (ret == 0 && sh7372_pd->resume)
+ if (ret == 0 && sh7372_pd->resume && do_resume)
sh7372_pd->resume();
return ret;
}
+static int pd_power_up(struct generic_pm_domain *genpd)
+{
+ return __pd_power_up(to_sh7372_pd(genpd), true);
+}
+
static void sh7372_a4r_suspend(void)
{
sh7372_intcs_suspend();
genpd->active_wakeup = pd_active_wakeup;
genpd->power_off = pd_power_down;
genpd->power_on = pd_power_up;
- genpd->power_on(&sh7372_pd->genpd);
+ __pd_power_up(sh7372_pd, false);
}
void sh7372_add_device_to_domain(struct sh7372_pm_domain *sh7372_pd,
.no_debug = true,
};
+static void sh7372_a3sp_init(void)
+{
+ /* serial consoles make use of SCIF hardware located in A3SP,
+ * keep such power domain on if "no_console_suspend" is set.
+ */
+ sh7372_a3sp.stay_on = !console_suspend_enabled;
+}
+
struct sh7372_pm_domain sh7372_a3sg = {
.bit_shift = 13,
};
-#endif /* CONFIG_PM */
+#else /* !CONFIG_PM */
+
+static inline void sh7372_a3sp_init(void) {}
+
+#endif /* !CONFIG_PM */
#if defined(CONFIG_SUSPEND) || defined(CONFIG_CPU_IDLE)
static int sh7372_do_idle_core_standby(unsigned long unused)
#ifdef CONFIG_CPU_IDLE
-static void sh7372_cpuidle_setup(struct cpuidle_device *dev)
+static void sh7372_cpuidle_setup(struct cpuidle_driver *drv)
{
- struct cpuidle_state *state;
- int i = dev->state_count;
+ struct cpuidle_state *state = &drv->states[drv->state_count];
- state = &dev->states[i];
snprintf(state->name, CPUIDLE_NAME_LEN, "C2");
strncpy(state->desc, "Core Standby Mode", CPUIDLE_DESC_LEN);
state->exit_latency = 10;
state->target_residency = 20 + 10;
- state->power_usage = 1; /* perhaps not */
- state->flags = 0;
- state->flags |= CPUIDLE_FLAG_TIME_VALID;
- shmobile_cpuidle_modes[i] = sh7372_enter_core_standby;
+ state->flags = CPUIDLE_FLAG_TIME_VALID;
+ shmobile_cpuidle_modes[drv->state_count] = sh7372_enter_core_standby;
- dev->state_count = i + 1;
+ drv->state_count++;
}
static void sh7372_cpuidle_init(void)
/* do not convert A3SM, A3SP, A3SG, A4R power down into A4S */
__raw_writel(0, PDNSEL);
+ sh7372_a3sp_init();
+
sh7372_suspend_init();
sh7372_cpuidle_init();
}
tegra_clk_init_from_table(tegra_dt_clk_init_table);
+ /*
+ * Finished with the static registrations now; fill in the missing
+ * devices
+ */
+ of_platform_populate(NULL, tegra_dt_match_table,
+ tegra20_auxdata_lookup, NULL);
+
for (i = 0; i < ARRAY_SIZE(pinmux_configs); i++) {
if (of_machine_is_compatible(pinmux_configs[i].machine)) {
pinmux_configs[i].init();
WARN(i == ARRAY_SIZE(pinmux_configs),
"Unknown platform! Pinmuxing not initialized\n");
-
- /*
- * Finished with the static registrations now; fill in the missing
- * devices
- */
- of_platform_populate(NULL, tegra_dt_match_table, tegra20_auxdata_lookup, NULL);
}
static const char * tegra_dt_board_compat[] = {
#include <linux/kernel.h>
#include <linux/gpio.h>
+#include <linux/of.h>
+
#include <mach/pinmux.h>
#include "gpio-names.h"
void harmony_pinmux_init(void)
{
- platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
+ if (!of_machine_is_compatible("nvidia,tegra20"))
+ platform_add_devices(pinmux_devices,
+ ARRAY_SIZE(pinmux_devices));
tegra_pinmux_config_table(harmony_pinmux, ARRAY_SIZE(harmony_pinmux));
#include <linux/kernel.h>
#include <linux/gpio.h>
+#include <linux/of.h>
+
#include <mach/pinmux.h>
#include "gpio-names.h"
void paz00_pinmux_init(void)
{
- platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
+ if (!of_machine_is_compatible("nvidia,tegra20"))
+ platform_add_devices(pinmux_devices,
+ ARRAY_SIZE(pinmux_devices));
tegra_pinmux_config_table(paz00_pinmux, ARRAY_SIZE(paz00_pinmux));
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/gpio.h>
+#include <linux/of.h>
#include <mach/pinmux.h>
#include <mach/pinmux-t2.h>
{ .gpio = TEGRA_GPIO_SD2_POWER, .enable = true },
{ .gpio = TEGRA_GPIO_LIDSWITCH, .enable = true },
{ .gpio = TEGRA_GPIO_POWERKEY, .enable = true },
+ { .gpio = TEGRA_GPIO_HP_DET, .enable = true },
{ .gpio = TEGRA_GPIO_ISL29018_IRQ, .enable = true },
{ .gpio = TEGRA_GPIO_CDC_IRQ, .enable = true },
{ .gpio = TEGRA_GPIO_USB1, .enable = true },
void __init seaboard_common_pinmux_init(void)
{
- platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
+ if (!of_machine_is_compatible("nvidia,tegra20"))
+ platform_add_devices(pinmux_devices,
+ ARRAY_SIZE(pinmux_devices));
tegra_pinmux_config_table(seaboard_pinmux, ARRAY_SIZE(seaboard_pinmux));
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/of.h>
#include <mach/pinmux.h>
void __init trimslice_pinmux_init(void)
{
- platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
+ if (!of_machine_is_compatible("nvidia,tegra20"))
+ platform_add_devices(pinmux_devices,
+ ARRAY_SIZE(pinmux_devices));
tegra_pinmux_config_table(trimslice_pinmux, ARRAY_SIZE(trimslice_pinmux));
tegra_gpio_config(gpio_table, ARRAY_SIZE(gpio_table));
}
/* LCD controller*/
-static struct nuc900fb_display __initdata nuc900_lcd_info[] = {
+static struct nuc900fb_display nuc900_lcd_info[] = {
/* Giantplus Technology GPM1040A0 320x240 Color TFT LCD */
[0] = {
.type = LCM_DCCS_VA_SRC_RGB565,
},
};
-static struct nuc900fb_mach_info nuc900_fb_info __initdata = {
+static struct nuc900fb_mach_info nuc900_fb_info = {
#if defined(CONFIG_GPM1040A0_320X240)
.displays = &nuc900_lcd_info[0],
#else
extern void mfp_set_groupf(struct device *dev);
extern void mfp_set_groupc(struct device *dev);
extern void mfp_set_groupi(struct device *dev);
-extern void mfp_set_groupg(struct device *dev);
+extern void mfp_set_groupg(struct device *dev, const char *subname);
+extern void mfp_set_groupd(struct device *dev, const char *subname);
#endif /* __ASM_ARCH_MFP_H */
#ifndef __ASM_ARCH_SPI_H
#define __ASM_ARCH_SPI_H
-extern void mfp_set_groupg(struct device *dev);
+extern void mfp_set_groupg(struct device *dev, const char *subname);
struct nuc900_spi_info {
unsigned int num_cs;
#define REG_MFSEL (W90X900_VA_GCR + 0xC)
#define GPSELF (0x01 << 1)
-
#define GPSELC (0x03 << 2)
-#define ENKPI (0x02 << 2)
-#define ENNAND (0x01 << 2)
+#define GPSELD (0x0f << 4)
#define GPSELEI0 (0x01 << 26)
#define GPSELEI1 (0x01 << 27)
#define GPIOG0TO1 (0x03 << 14)
#define GPIOG2TO3 (0x03 << 16)
#define GPIOG22TO23 (0x03 << 22)
+#define GPIOG18TO20 (0x07 << 18)
#define ENSPI (0x0a << 14)
#define ENI2C0 (0x01 << 14)
#define ENI2C1 (0x01 << 16)
#define ENAC97 (0x02 << 22)
+#define ENSD1 (0x02 << 18)
+#define ENSD0 (0x0a << 4)
+#define ENKPI (0x02 << 2)
+#define ENNAND (0x01 << 2)
static DEFINE_MUTEX(mfp_mutex);
}
EXPORT_SYMBOL(mfp_set_groupi);
-void mfp_set_groupg(struct device *dev)
+void mfp_set_groupg(struct device *dev, const char *subname)
{
unsigned long mfpen;
const char *dev_id;
- BUG_ON(!dev);
+ BUG_ON((!dev) && (!subname));
mutex_lock(&mfp_mutex);
- dev_id = dev_name(dev);
+ if (subname != NULL)
+ dev_id = subname;
+ else
+ dev_id = dev_name(dev);
mfpen = __raw_readl(REG_MFSEL);
} else if (strcmp(dev_id, "nuc900-audio") == 0) {
mfpen &= ~(GPIOG22TO23);
mfpen |= ENAC97;/*enable AC97*/
+ } else if (strcmp(dev_id, "nuc900-mmc-port1") == 0) {
+ mfpen &= ~(GPIOG18TO20);
+ mfpen |= (ENSD1 | 0x01);/*enable sd1*/
} else {
mfpen &= ~(GPIOG0TO1 | GPIOG2TO3);/*GPIOG[3:0]*/
}
}
EXPORT_SYMBOL(mfp_set_groupg);
+void mfp_set_groupd(struct device *dev, const char *subname)
+{
+ unsigned long mfpen;
+ const char *dev_id;
+
+ BUG_ON((!dev) && (!subname));
+
+ mutex_lock(&mfp_mutex);
+
+ if (subname != NULL)
+ dev_id = subname;
+ else
+ dev_id = dev_name(dev);
+
+ mfpen = __raw_readl(REG_MFSEL);
+
+ if (strcmp(dev_id, "nuc900-mmc-port0") == 0) {
+ mfpen &= ~GPSELD;/*enable sd0*/
+ mfpen |= ENSD0;
+ } else
+ mfpen &= (~GPSELD);
+
+ __raw_writel(mfpen, REG_MFSEL);
+
+ mutex_unlock(&mfp_mutex);
+}
+EXPORT_SYMBOL(mfp_set_groupd);
config ARCH_IMX_V4_V5
bool "i.MX1, i.MX21, i.MX25, i.MX27"
- select AUTO_ZRELADDR
+ select AUTO_ZRELADDR if !ZBOOT_ROM
select ARM_PATCH_PHYS_VIRT
help
This enables support for systems based on the Freescale i.MX ARMv4
config ARCH_MX5
bool "i.MX50, i.MX51, i.MX53"
- select AUTO_ZRELADDR
+ select AUTO_ZRELADDR if !ZBOOT_ROM
select ARM_PATCH_PHYS_VIRT
help
This enables support for machines using Freescale's i.MX50 and i.MX53
#include <linux/io.h>
#include <mach/common.h>
#include <asm/mach/irq.h>
+#include <asm/exception.h>
#include <mach/hardware.h>
#include "irq-common.h"
if (irqnr == 1023)
break;
- if (irqnr > 29 && irqnr < 1021)
+ if (irqnr > 15 && irqnr < 1021)
handle_IRQ(irqnr, regs);
#ifdef CONFIG_SMP
- else if (irqnr < 16) {
+ else {
writel_relaxed(irqstat, gic_cpu_base_addr +
GIC_CPU_EOI);
handle_IPI(irqnr, regs);
}
-#endif
-#ifdef CONFIG_LOCAL_TIMERS
- else if (irqnr == 29) {
- writel_relaxed(irqstat, gic_cpu_base_addr +
- GIC_CPU_EOI);
- handle_local_timer(regs);
- }
#endif
} while (1);
}
.macro test_for_ipi, irqnr, irqstat, base, tmp
.endm
-
- .macro test_for_ltirq, irqnr, irqstat, base, tmp
- .endm
#include <linux/io.h>
#include <asm/mach/irq.h>
+#include <asm/exception.h>
#include <mach/hardware.h>
#include <mach/common.h>
struct bfin_serial_port {
struct uart_port port;
unsigned int old_status;
+ int tx_irq;
+ int rx_irq;
int status_irq;
#ifndef BFIN_UART_BF54X_STYLE
unsigned int lsr;
.end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX+1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART1_TX,
+ .end = IRQ_UART1_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART1_RX,
- .end = IRQ_UART1_RX+1,
+ .end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX+1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART1_TX,
+ .end = IRQ_UART1_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART1_RX,
- .end = IRQ_UART1_RX+1,
+ .end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX+1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART1_TX,
+ .end = IRQ_UART1_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART1_RX,
- .end = IRQ_UART1_RX+1,
+ .end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{
*/
#include <linux/device.h>
+#include <linux/export.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
.end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX+1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART1_TX,
+ .end = IRQ_UART1_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART1_RX,
- .end = IRQ_UART1_RX+1,
+ .end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
#include <linux/input.h>
#include <linux/gpio_keys.h>
-#include <linux/export.h>
static struct gpio_keys_button bfin_gpio_keys_table[] = {
{BTN_0, GPIO_PF14, 1, "gpio-keys: BTN0"},
*/
#include <linux/device.h>
+#include <linux/export.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
.end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX+1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART1_TX,
+ .end = IRQ_UART1_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART1_RX,
- .end = IRQ_UART1_RX+1,
+ .end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
#include <linux/input.h>
#include <linux/gpio_keys.h>
-#include <linux/export.h>
static struct gpio_keys_button bfin_gpio_keys_table[] = {
{BTN_0, GPIO_PG0, 1, "gpio-keys: BTN0"},
.end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX+1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART1_TX,
+ .end = IRQ_UART1_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART1_RX,
- .end = IRQ_UART1_RX+1,
+ .end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX+1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART1_TX,
+ .end = IRQ_UART1_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART1_RX,
- .end = IRQ_UART1_RX+1,
+ .end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = BFIN_UART_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX + 1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = BFIN_UART_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX + 1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = BFIN_UART_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX + 1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = BFIN_UART_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX + 1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = BFIN_UART_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX + 1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = BFIN_UART_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX + 1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
*/
#include <linux/device.h>
+#include <linux/export.h>
#include <linux/etherdevice.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
.end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX+1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART1_TX,
+ .end = IRQ_UART1_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART1_RX,
- .end = IRQ_UART1_RX+1,
+ .end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
#include <linux/bfin_mac.h>
-#include <linux/export.h>
static const unsigned short bfin_mac_peripherals[] = P_MII0;
static struct bfin_phydev_platform_data bfin_phydev_data[] = {
#include <linux/device.h>
#include <linux/etherdevice.h>
+#include <linux/export.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
.end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX+1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART1_TX,
+ .end = IRQ_UART1_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART1_RX,
- .end = IRQ_UART1_RX+1,
+ .end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
#include <linux/bfin_mac.h>
-#include <linux/export.h>
static const unsigned short bfin_mac_peripherals[] = P_MII0;
static struct bfin_phydev_platform_data bfin_phydev_data[] = {
*/
#include <linux/device.h>
+#include <linux/export.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
#include <linux/bfin_mac.h>
-#include <linux/export.h>
static const unsigned short bfin_mac_peripherals[] = P_RMII0;
static struct bfin_phydev_platform_data bfin_phydev_data[] = {
.end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX+1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART1_TX,
+ .end = IRQ_UART1_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART1_RX,
- .end = IRQ_UART1_RX+1,
+ .end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX+1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART1_TX,
+ .end = IRQ_UART1_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART1_RX,
- .end = IRQ_UART1_RX+1,
+ .end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{
#include <linux/device.h>
#include <linux/etherdevice.h>
+#include <linux/export.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
.end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX+1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART1_TX,
+ .end = IRQ_UART1_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART1_RX,
- .end = IRQ_UART1_RX+1,
+ .end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{
*/
#include <linux/device.h>
+#include <linux/export.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/io.h>
.end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX+1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART1_TX,
+ .end = IRQ_UART1_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART1_RX,
- .end = IRQ_UART1_RX+1,
+ .end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{
#if defined(CONFIG_BACKLIGHT_ADP8860) || defined(CONFIG_BACKLIGHT_ADP8860_MODULE)
#include <linux/i2c/adp8860.h>
-#include <linux/export.h>
static struct led_info adp8860_leds[] = {
{
.name = "adp8860-led7",
#include <linux/device.h>
#include <linux/etherdevice.h>
+#include <linux/export.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
.end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX+1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART1_TX,
+ .end = IRQ_UART1_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART1_RX,
- .end = IRQ_UART1_RX+1,
+ .end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
#include <linux/bfin_mac.h>
-#include <linux/export.h>
static const unsigned short bfin_mac_peripherals[] = P_MII0;
static struct bfin_phydev_platform_data bfin_phydev_data[] = {
.end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX+1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART1_TX,
+ .end = IRQ_UART1_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART1_RX,
- .end = IRQ_UART1_RX+1,
+ .end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART2_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART2_TX,
+ .end = IRQ_UART2_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART2_RX,
- .end = IRQ_UART2_RX+1,
+ .end = IRQ_UART2_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART0_RBR+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX+1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART1_RBR+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART1_TX,
+ .end = IRQ_UART1_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART1_RX,
- .end = IRQ_UART1_RX+1,
+ .end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART2_RBR+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART2_TX,
+ .end = IRQ_UART2_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART2_RX,
- .end = IRQ_UART2_RX+1,
+ .end = IRQ_UART2_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART3_RBR+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART3_TX,
+ .end = IRQ_UART3_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART3_RX,
- .end = IRQ_UART3_RX+1,
+ .end = IRQ_UART3_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART0_RBR+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX+1,
+ .end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART1_RBR+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART1_TX,
+ .end = IRQ_UART1_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART1_RX,
- .end = IRQ_UART1_RX+1,
+ .end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART2_RBR+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART2_TX,
+ .end = IRQ_UART2_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART2_RX,
- .end = IRQ_UART2_RX+1,
+ .end = IRQ_UART2_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = UART3_RBR+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART3_TX,
+ .end = IRQ_UART3_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART3_RX,
- .end = IRQ_UART3_RX+1,
+ .end = IRQ_UART3_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = BFIN_UART_GCTL + 2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART_TX,
+ .end = IRQ_UART_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART_RX,
- .end = IRQ_UART_RX + 1,
+ .end = IRQ_UART_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = BFIN_UART_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART_TX,
+ .end = IRQ_UART_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART_RX,
- .end = IRQ_UART_RX+1,
+ .end = IRQ_UART_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = BFIN_UART_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART_TX,
+ .end = IRQ_UART_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART_RX,
- .end = IRQ_UART_RX+1,
+ .end = IRQ_UART_RX,
.flags = IORESOURCE_IRQ,
},
{
.end = BFIN_UART_GCTL+2,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = IRQ_UART_TX,
+ .end = IRQ_UART_TX,
+ .flags = IORESOURCE_IRQ,
+ },
{
.start = IRQ_UART_RX,
- .end = IRQ_UART_RX+1,
+ .end = IRQ_UART_RX,
.flags = IORESOURCE_IRQ,
},
{
config ETRAX_ETHERNET
bool "Ethernet support"
depends on ETRAX_ARCH_V10
- select NET_ETHERNET
+ select ETHERNET
select NET_CORE
select MII
help
config ETRAX_ETHERNET
bool "Ethernet support"
depends on ETRAX_ARCH_V32
- select NET_ETHERNET
+ select ETHERNET
select NET_CORE
select MII
help
select HAVE_IDE
select HAVE_AOUT if MMU
select GENERIC_ATOMIC64 if MMU
- select HAVE_GENERIC_HARDIRQS if !MMU
- select GENERIC_IRQ_SHOW if !MMU
+ select HAVE_GENERIC_HARDIRQS
+ select GENERIC_IRQ_SHOW
select ARCH_HAVE_NMI_SAFE_CMPXCHG if RMW_INSNS
config RWSEM_GENERIC_SPINLOCK
comment "Bus Support"
+config DIO
+ bool "DIO bus support"
+ depends on HP300
+ default y
+ help
+ Say Y here to enable support for the "DIO" expansion bus used in
+ HP300 machines. If you are using such a system you almost certainly
+ want this.
+
config NUBUS
bool
depends on MAC
including the model, CPU, MMU, clock speed, BogoMIPS rating,
and memory size.
+config NATFEAT
+ bool "ARAnyM emulator support"
+ depends on ATARI
+ help
+ This option enables support for ARAnyM native features, such as
+ access to a disk image as /dev/hda.
+
+config NFBLOCK
+ tristate "NatFeat block device support"
+ depends on BLOCK && NATFEAT
+ help
+ Say Y to include support for the ARAnyM NatFeat block device
+ which allows direct access to the hard drives without using
+ the hardware emulation.
+
+config NFCON
+ tristate "NatFeat console driver"
+ depends on NATFEAT
+ help
+ Say Y to include support for the ARAnyM NatFeat console driver
+ which allows the console output to be redirected to the stderr
+ output of ARAnyM.
+
+config NFETH
+ tristate "NatFeat Ethernet support"
+ depends on ETHERNET && NATFEAT
+ help
+ Say Y to include support for the ARAnyM NatFeat network device
+ which will emulate a regular ethernet device while presenting an
+ ethertap device to the host system.
+
endmenu
menu "Character devices"
/*
- * linux/arch/m68k/amiga/amiints.c -- Amiga Linux interrupt handling code
+ * Amiga Linux interrupt handling code
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive
* for more details.
- *
- * 11/07/96: rewritten interrupt handling, irq lists are exists now only for
- * this sources where it makes sense (VERTB/PORTS/EXTER) and you must
- * be careful that dev_id for this sources is unique since this the
- * only possibility to distinguish between different handlers for
- * free_irq. irq lists also have different irq flags:
- * - IRQ_FLG_FAST: handler is inserted at top of list (after other
- * fast handlers)
- * - IRQ_FLG_SLOW: handler is inserted at bottom of list and before
- * they're executed irq level is set to the previous
- * one, but handlers don't need to be reentrant, if
- * reentrance occurred, slow handlers will be just
- * called again.
- * The whole interrupt handling for CIAs is moved to cia.c
- * /Roman Zippel
- *
- * 07/08/99: rewamp of the interrupt handling - we now have two types of
- * interrupts, normal and fast handlers, fast handlers being
- * marked with IRQF_DISABLED and runs with all other interrupts
- * disabled. Normal interrupts disable their own source but
- * run with all other interrupt sources enabled.
- * PORTS and EXTER interrupts are always shared even if the
- * drivers do not explicitly mark this when calling
- * request_irq which they really should do.
- * This is similar to the way interrupts are handled on all
- * other architectures and makes a ton of sense besides
- * having the advantage of making it easier to share
- * drivers.
- * /Jes
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/errno.h>
+#include <linux/irq.h>
#include <asm/irq.h>
#include <asm/traps.h>
#include <asm/amigaints.h>
#include <asm/amipcmcia.h>
-static void amiga_enable_irq(unsigned int irq);
-static void amiga_disable_irq(unsigned int irq);
-static irqreturn_t ami_int1(int irq, void *dev_id);
-static irqreturn_t ami_int3(int irq, void *dev_id);
-static irqreturn_t ami_int4(int irq, void *dev_id);
-static irqreturn_t ami_int5(int irq, void *dev_id);
-
-static struct irq_controller amiga_irq_controller = {
- .name = "amiga",
- .lock = __SPIN_LOCK_UNLOCKED(amiga_irq_controller.lock),
- .enable = amiga_enable_irq,
- .disable = amiga_disable_irq,
-};
-
-/*
- * void amiga_init_IRQ(void)
- *
- * Parameters: None
- *
- * Returns: Nothing
- *
- * This function should be called during kernel startup to initialize
- * the amiga IRQ handling routines.
- */
-
-void __init amiga_init_IRQ(void)
-{
- if (request_irq(IRQ_AUTO_1, ami_int1, 0, "int1", NULL))
- pr_err("Couldn't register int%d\n", 1);
- if (request_irq(IRQ_AUTO_3, ami_int3, 0, "int3", NULL))
- pr_err("Couldn't register int%d\n", 3);
- if (request_irq(IRQ_AUTO_4, ami_int4, 0, "int4", NULL))
- pr_err("Couldn't register int%d\n", 4);
- if (request_irq(IRQ_AUTO_5, ami_int5, 0, "int5", NULL))
- pr_err("Couldn't register int%d\n", 5);
-
- m68k_setup_irq_controller(&amiga_irq_controller, IRQ_USER, AMI_STD_IRQS);
-
- /* turn off PCMCIA interrupts */
- if (AMIGAHW_PRESENT(PCMCIA))
- gayle.inten = GAYLE_IRQ_IDE;
-
- /* turn off all interrupts and enable the master interrupt bit */
- amiga_custom.intena = 0x7fff;
- amiga_custom.intreq = 0x7fff;
- amiga_custom.intena = IF_SETCLR | IF_INTEN;
-
- cia_init_IRQ(&ciaa_base);
- cia_init_IRQ(&ciab_base);
-}
/*
* Enable/disable a particular machine specific interrupt source.
* internal data, that may not be changed by the interrupt at the same time.
*/
-static void amiga_enable_irq(unsigned int irq)
+static void amiga_irq_enable(struct irq_data *data)
{
- amiga_custom.intena = IF_SETCLR | (1 << (irq - IRQ_USER));
+ amiga_custom.intena = IF_SETCLR | (1 << (data->irq - IRQ_USER));
}
-static void amiga_disable_irq(unsigned int irq)
+static void amiga_irq_disable(struct irq_data *data)
{
- amiga_custom.intena = 1 << (irq - IRQ_USER);
+ amiga_custom.intena = 1 << (data->irq - IRQ_USER);
}
+static struct irq_chip amiga_irq_chip = {
+ .name = "amiga",
+ .irq_enable = amiga_irq_enable,
+ .irq_disable = amiga_irq_disable,
+};
+
+
/*
* The builtin Amiga hardware interrupt handlers.
*/
-static irqreturn_t ami_int1(int irq, void *dev_id)
+static void ami_int1(unsigned int irq, struct irq_desc *desc)
{
unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar;
/* if serial transmit buffer empty, interrupt */
if (ints & IF_TBE) {
amiga_custom.intreq = IF_TBE;
- m68k_handle_int(IRQ_AMIGA_TBE);
+ generic_handle_irq(IRQ_AMIGA_TBE);
}
/* if floppy disk transfer complete, interrupt */
if (ints & IF_DSKBLK) {
amiga_custom.intreq = IF_DSKBLK;
- m68k_handle_int(IRQ_AMIGA_DSKBLK);
+ generic_handle_irq(IRQ_AMIGA_DSKBLK);
}
/* if software interrupt set, interrupt */
if (ints & IF_SOFT) {
amiga_custom.intreq = IF_SOFT;
- m68k_handle_int(IRQ_AMIGA_SOFT);
+ generic_handle_irq(IRQ_AMIGA_SOFT);
}
- return IRQ_HANDLED;
}
-static irqreturn_t ami_int3(int irq, void *dev_id)
+static void ami_int3(unsigned int irq, struct irq_desc *desc)
{
unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar;
/* if a blitter interrupt */
if (ints & IF_BLIT) {
amiga_custom.intreq = IF_BLIT;
- m68k_handle_int(IRQ_AMIGA_BLIT);
+ generic_handle_irq(IRQ_AMIGA_BLIT);
}
/* if a copper interrupt */
if (ints & IF_COPER) {
amiga_custom.intreq = IF_COPER;
- m68k_handle_int(IRQ_AMIGA_COPPER);
+ generic_handle_irq(IRQ_AMIGA_COPPER);
}
/* if a vertical blank interrupt */
if (ints & IF_VERTB) {
amiga_custom.intreq = IF_VERTB;
- m68k_handle_int(IRQ_AMIGA_VERTB);
+ generic_handle_irq(IRQ_AMIGA_VERTB);
}
- return IRQ_HANDLED;
}
-static irqreturn_t ami_int4(int irq, void *dev_id)
+static void ami_int4(unsigned int irq, struct irq_desc *desc)
{
unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar;
/* if audio 0 interrupt */
if (ints & IF_AUD0) {
amiga_custom.intreq = IF_AUD0;
- m68k_handle_int(IRQ_AMIGA_AUD0);
+ generic_handle_irq(IRQ_AMIGA_AUD0);
}
/* if audio 1 interrupt */
if (ints & IF_AUD1) {
amiga_custom.intreq = IF_AUD1;
- m68k_handle_int(IRQ_AMIGA_AUD1);
+ generic_handle_irq(IRQ_AMIGA_AUD1);
}
/* if audio 2 interrupt */
if (ints & IF_AUD2) {
amiga_custom.intreq = IF_AUD2;
- m68k_handle_int(IRQ_AMIGA_AUD2);
+ generic_handle_irq(IRQ_AMIGA_AUD2);
}
/* if audio 3 interrupt */
if (ints & IF_AUD3) {
amiga_custom.intreq = IF_AUD3;
- m68k_handle_int(IRQ_AMIGA_AUD3);
+ generic_handle_irq(IRQ_AMIGA_AUD3);
}
- return IRQ_HANDLED;
}
-static irqreturn_t ami_int5(int irq, void *dev_id)
+static void ami_int5(unsigned int irq, struct irq_desc *desc)
{
unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar;
/* if serial receive buffer full interrupt */
if (ints & IF_RBF) {
/* acknowledge of IF_RBF must be done by the serial interrupt */
- m68k_handle_int(IRQ_AMIGA_RBF);
+ generic_handle_irq(IRQ_AMIGA_RBF);
}
/* if a disk sync interrupt */
if (ints & IF_DSKSYN) {
amiga_custom.intreq = IF_DSKSYN;
- m68k_handle_int(IRQ_AMIGA_DSKSYN);
+ generic_handle_irq(IRQ_AMIGA_DSKSYN);
}
- return IRQ_HANDLED;
+}
+
+
+/*
+ * void amiga_init_IRQ(void)
+ *
+ * Parameters: None
+ *
+ * Returns: Nothing
+ *
+ * This function should be called during kernel startup to initialize
+ * the amiga IRQ handling routines.
+ */
+
+void __init amiga_init_IRQ(void)
+{
+ m68k_setup_irq_controller(&amiga_irq_chip, handle_simple_irq, IRQ_USER,
+ AMI_STD_IRQS);
+
+ irq_set_chained_handler(IRQ_AUTO_1, ami_int1);
+ irq_set_chained_handler(IRQ_AUTO_3, ami_int3);
+ irq_set_chained_handler(IRQ_AUTO_4, ami_int4);
+ irq_set_chained_handler(IRQ_AUTO_5, ami_int5);
+
+ /* turn off PCMCIA interrupts */
+ if (AMIGAHW_PRESENT(PCMCIA))
+ gayle.inten = GAYLE_IRQ_IDE;
+
+ /* turn off all interrupts and enable the master interrupt bit */
+ amiga_custom.intena = 0x7fff;
+ amiga_custom.intreq = 0x7fff;
+ amiga_custom.intena = IF_SETCLR | IF_INTEN;
+
+ cia_init_IRQ(&ciaa_base);
+ cia_init_IRQ(&ciab_base);
}
amiga_custom.intreq = base->int_mask;
for (; ints; mach_irq++, ints >>= 1) {
if (ints & 1)
- m68k_handle_int(mach_irq);
+ generic_handle_irq(mach_irq);
}
return IRQ_HANDLED;
}
-static void cia_enable_irq(unsigned int irq)
+static void cia_irq_enable(struct irq_data *data)
{
+ unsigned int irq = data->irq;
unsigned char mask;
if (irq >= IRQ_AMIGA_CIAB) {
}
}
-static void cia_disable_irq(unsigned int irq)
+static void cia_irq_disable(struct irq_data *data)
{
+ unsigned int irq = data->irq;
+
if (irq >= IRQ_AMIGA_CIAB)
cia_able_irq(&ciab_base, 1 << (irq - IRQ_AMIGA_CIAB));
else
cia_able_irq(&ciaa_base, 1 << (irq - IRQ_AMIGA_CIAA));
}
-static struct irq_controller cia_irq_controller = {
+static struct irq_chip cia_irq_chip = {
.name = "cia",
- .lock = __SPIN_LOCK_UNLOCKED(cia_irq_controller.lock),
- .enable = cia_enable_irq,
- .disable = cia_disable_irq,
+ .irq_enable = cia_irq_enable,
+ .irq_disable = cia_irq_disable,
};
/*
* into this chain.
*/
-static void auto_enable_irq(unsigned int irq)
+static void auto_irq_enable(struct irq_data *data)
{
- switch (irq) {
+ switch (data->irq) {
case IRQ_AUTO_2:
amiga_custom.intena = IF_SETCLR | IF_PORTS;
break;
}
}
-static void auto_disable_irq(unsigned int irq)
+static void auto_irq_disable(struct irq_data *data)
{
- switch (irq) {
+ switch (data->irq) {
case IRQ_AUTO_2:
amiga_custom.intena = IF_PORTS;
break;
}
}
-static struct irq_controller auto_irq_controller = {
+static struct irq_chip auto_irq_chip = {
.name = "auto",
- .lock = __SPIN_LOCK_UNLOCKED(auto_irq_controller.lock),
- .enable = auto_enable_irq,
- .disable = auto_disable_irq,
+ .irq_enable = auto_irq_enable,
+ .irq_disable = auto_irq_disable,
};
void __init cia_init_IRQ(struct ciabase *base)
{
- m68k_setup_irq_controller(&cia_irq_controller, base->cia_irq, CIA_IRQS);
+ m68k_setup_irq_controller(&cia_irq_chip, handle_simple_irq,
+ base->cia_irq, CIA_IRQS);
/* clear any pending interrupt and turn off all interrupts */
cia_set_irq(base, CIA_ICR_ALL);
cia_able_irq(base, CIA_ICR_ALL);
/* override auto int and install CIA handler */
- m68k_setup_irq_controller(&auto_irq_controller, base->handler_irq, 1);
- m68k_irq_startup(base->handler_irq);
+ m68k_setup_irq_controller(&auto_irq_chip, handle_simple_irq,
+ base->handler_irq, 1);
+ m68k_irq_startup_irq(base->handler_irq);
if (request_irq(base->handler_irq, cia_handler, IRQF_SHARED,
base->name, base))
pr_err("Couldn't register %s interrupt\n", base->name);
#include <linux/interrupt.h>
+#include <linux/irq.h>
-#include <asm/irq.h>
#include <asm/traps.h>
#include <asm/apollohw.h>
-void dn_process_int(unsigned int irq, struct pt_regs *fp)
+unsigned int apollo_irq_startup(struct irq_data *data)
{
- __m68k_handle_int(irq, fp);
+ unsigned int irq = data->irq;
- *(volatile unsigned char *)(pica)=0x20;
- *(volatile unsigned char *)(picb)=0x20;
-}
-
-int apollo_irq_startup(unsigned int irq)
-{
if (irq < 8)
*(volatile unsigned char *)(pica+1) &= ~(1 << irq);
else
return 0;
}
-void apollo_irq_shutdown(unsigned int irq)
+void apollo_irq_shutdown(struct irq_data *data)
{
+ unsigned int irq = data->irq;
+
if (irq < 8)
*(volatile unsigned char *)(pica+1) |= (1 << irq);
else
*(volatile unsigned char *)(picb+1) |= (1 << (irq - 8));
}
-static struct irq_controller apollo_irq_controller = {
+void apollo_irq_eoi(struct irq_data *data)
+{
+ *(volatile unsigned char *)(pica) = 0x20;
+ *(volatile unsigned char *)(picb) = 0x20;
+}
+
+static struct irq_chip apollo_irq_chip = {
.name = "apollo",
- .lock = __SPIN_LOCK_UNLOCKED(apollo_irq_controller.lock),
- .startup = apollo_irq_startup,
- .shutdown = apollo_irq_shutdown,
+ .irq_startup = apollo_irq_startup,
+ .irq_shutdown = apollo_irq_shutdown,
+ .irq_eoi = apollo_irq_eoi,
};
void __init dn_init_IRQ(void)
{
- m68k_setup_user_interrupt(VEC_USER + 96, 16, dn_process_int);
- m68k_setup_irq_controller(&apollo_irq_controller, IRQ_APOLLO, 16);
+ m68k_setup_user_interrupt(VEC_USER + 96, 16);
+ m68k_setup_irq_controller(&apollo_irq_chip, handle_fasteoi_irq,
+ IRQ_APOLLO, 16);
}
* <asm/atariints.h>): Autovector interrupts are 1..7, then follow ST-MFP,
* TT-MFP, SCC, and finally VME interrupts. Vector numbers for the latter can
* be allocated by atari_register_vme_int().
- *
- * Each interrupt can be of three types:
- *
- * - SLOW: The handler runs with all interrupts enabled, except the one it
- * was called by (to avoid reentering). This should be the usual method.
- * But it is currently possible only for MFP ints, since only the MFP
- * offers an easy way to mask interrupts.
- *
- * - FAST: The handler runs with all interrupts disabled. This should be used
- * only for really fast handlers, that just do actions immediately
- * necessary, and let the rest do a bottom half or task queue.
- *
- * - PRIORITIZED: The handler can be interrupted by higher-level ints
- * (greater IPL, no MFP priorities!). This is the method of choice for ints
- * which should be slow, but are not from a MFP.
- *
- * The feature of more than one handler for one int source is still there, but
- * only applicable if all handers are of the same type. To not slow down
- * processing of ints with only one handler by the chaining feature, the list
- * calling function atari_call_irq_list() is only plugged in at the time the
- * second handler is registered.
- *
- * Implementation notes: For fast-as-possible int handling, there are separate
- * entry points for each type (slow/fast/prio). The assembler handler calls
- * the irq directly in the usual case, no C wrapper is involved. In case of
- * multiple handlers, atari_call_irq_list() is registered as handler and calls
- * in turn the real irq's. To ease access from assembler level to the irq
- * function pointer and accompanying data, these two are stored in a separate
- * array, irq_handler[]. The rest of data (type, name) are put into a second
- * array, irq_param, that is accessed from C only. For each slow interrupt (32
- * in all) there are separate handler functions, which makes it possible to
- * hard-code the MFP register address and value, are necessary to mask the
- * int. If there'd be only one generic function, lots of calculations would be
- * needed to determine MFP register and int mask from the vector number :-(
- *
- * Furthermore, slow ints may not lower the IPL below its previous value
- * (before the int happened). This is needed so that an int of class PRIO, on
- * that this int may be stacked, cannot be reentered. This feature is
- * implemented as follows: If the stack frame format is 1 (throwaway), the int
- * is not stacked, and the IPL is anded with 0xfbff, resulting in a new level
- * 2, which still blocks the HSYNC, but no interrupts of interest. If the
- * frame format is 0, the int is nested, and the old IPL value can be found in
- * the sr copy in the frame.
- */
-
-#if 0
-
-#define NUM_INT_SOURCES (8 + NUM_ATARI_SOURCES)
-
-typedef void (*asm_irq_handler)(void);
-
-struct irqhandler {
- irqreturn_t (*handler)(int, void *, struct pt_regs *);
- void *dev_id;
-};
-
-struct irqparam {
- unsigned long flags;
- const char *devname;
-};
-
-/*
- * Array with irq's and their parameter data. This array is accessed from low
- * level assembler code, so an element size of 8 allows usage of index scaling
- * addressing mode.
*/
-static struct irqhandler irq_handler[NUM_INT_SOURCES];
-
-/*
- * This array hold the rest of parameters of int handlers: type
- * (slow,fast,prio) and the name of the handler. These values are only
- * accessed from C
- */
-static struct irqparam irq_param[NUM_INT_SOURCES];
-
-/* check for valid int number (complex, sigh...) */
-#define IS_VALID_INTNO(n) \
- ((n) > 0 && \
- /* autovec and ST-MFP ok anyway */ \
- (((n) < TTMFP_SOURCE_BASE) || \
- /* TT-MFP ok if present */ \
- ((n) >= TTMFP_SOURCE_BASE && (n) < SCC_SOURCE_BASE && \
- ATARIHW_PRESENT(TT_MFP)) || \
- /* SCC ok if present and number even */ \
- ((n) >= SCC_SOURCE_BASE && (n) < VME_SOURCE_BASE && \
- !((n) & 1) && ATARIHW_PRESENT(SCC)) || \
- /* greater numbers ok if they are registered VME vectors */ \
- ((n) >= VME_SOURCE_BASE && (n) < VME_SOURCE_BASE + VME_MAX_SOURCES && \
- free_vme_vec_bitmap & (1 << ((n) - VME_SOURCE_BASE)))))
-
-
-/*
- * Here start the assembler entry points for interrupts
- */
-
-#define IRQ_NAME(nr) atari_slow_irq_##nr##_handler(void)
-
-#define BUILD_SLOW_IRQ(n) \
-asmlinkage void IRQ_NAME(n); \
-/* Dummy function to allow asm with operands. */ \
-void atari_slow_irq_##n##_dummy (void) { \
-__asm__ (__ALIGN_STR "\n" \
-"atari_slow_irq_" #n "_handler:\t" \
-" addl %6,%5\n" /* preempt_count() += HARDIRQ_OFFSET */ \
- SAVE_ALL_INT "\n" \
- GET_CURRENT(%%d0) "\n" \
-" andb #~(1<<(%c3&7)),%a4:w\n" /* mask this interrupt */ \
- /* get old IPL from stack frame */ \
-" bfextu %%sp@(%c2){#5,#3},%%d0\n" \
-" movew %%sr,%%d1\n" \
-" bfins %%d0,%%d1{#21,#3}\n" \
-" movew %%d1,%%sr\n" /* set IPL = previous value */ \
-" addql #1,%a0\n" \
-" lea %a1,%%a0\n" \
-" pea %%sp@\n" /* push addr of frame */ \
-" movel %%a0@(4),%%sp@-\n" /* push handler data */ \
-" pea (%c3+8)\n" /* push int number */ \
-" movel %%a0@,%%a0\n" \
-" jbsr %%a0@\n" /* call the handler */ \
-" addql #8,%%sp\n" \
-" addql #4,%%sp\n" \
-" orw #0x0600,%%sr\n" \
-" andw #0xfeff,%%sr\n" /* set IPL = 6 again */ \
-" orb #(1<<(%c3&7)),%a4:w\n" /* now unmask the int again */ \
-" jbra ret_from_interrupt\n" \
- : : "i" (&kstat_cpu(0).irqs[n+8]), "i" (&irq_handler[n+8]), \
- "n" (PT_OFF_SR), "n" (n), \
- "i" (n & 8 ? (n & 16 ? &tt_mfp.int_mk_a : &st_mfp.int_mk_a) \
- : (n & 16 ? &tt_mfp.int_mk_b : &st_mfp.int_mk_b)), \
- "m" (preempt_count()), "di" (HARDIRQ_OFFSET) \
-); \
- for (;;); /* fake noreturn */ \
-}
-
-BUILD_SLOW_IRQ(0);
-BUILD_SLOW_IRQ(1);
-BUILD_SLOW_IRQ(2);
-BUILD_SLOW_IRQ(3);
-BUILD_SLOW_IRQ(4);
-BUILD_SLOW_IRQ(5);
-BUILD_SLOW_IRQ(6);
-BUILD_SLOW_IRQ(7);
-BUILD_SLOW_IRQ(8);
-BUILD_SLOW_IRQ(9);
-BUILD_SLOW_IRQ(10);
-BUILD_SLOW_IRQ(11);
-BUILD_SLOW_IRQ(12);
-BUILD_SLOW_IRQ(13);
-BUILD_SLOW_IRQ(14);
-BUILD_SLOW_IRQ(15);
-BUILD_SLOW_IRQ(16);
-BUILD_SLOW_IRQ(17);
-BUILD_SLOW_IRQ(18);
-BUILD_SLOW_IRQ(19);
-BUILD_SLOW_IRQ(20);
-BUILD_SLOW_IRQ(21);
-BUILD_SLOW_IRQ(22);
-BUILD_SLOW_IRQ(23);
-BUILD_SLOW_IRQ(24);
-BUILD_SLOW_IRQ(25);
-BUILD_SLOW_IRQ(26);
-BUILD_SLOW_IRQ(27);
-BUILD_SLOW_IRQ(28);
-BUILD_SLOW_IRQ(29);
-BUILD_SLOW_IRQ(30);
-BUILD_SLOW_IRQ(31);
-
-asm_irq_handler slow_handlers[32] = {
- [0] = atari_slow_irq_0_handler,
- [1] = atari_slow_irq_1_handler,
- [2] = atari_slow_irq_2_handler,
- [3] = atari_slow_irq_3_handler,
- [4] = atari_slow_irq_4_handler,
- [5] = atari_slow_irq_5_handler,
- [6] = atari_slow_irq_6_handler,
- [7] = atari_slow_irq_7_handler,
- [8] = atari_slow_irq_8_handler,
- [9] = atari_slow_irq_9_handler,
- [10] = atari_slow_irq_10_handler,
- [11] = atari_slow_irq_11_handler,
- [12] = atari_slow_irq_12_handler,
- [13] = atari_slow_irq_13_handler,
- [14] = atari_slow_irq_14_handler,
- [15] = atari_slow_irq_15_handler,
- [16] = atari_slow_irq_16_handler,
- [17] = atari_slow_irq_17_handler,
- [18] = atari_slow_irq_18_handler,
- [19] = atari_slow_irq_19_handler,
- [20] = atari_slow_irq_20_handler,
- [21] = atari_slow_irq_21_handler,
- [22] = atari_slow_irq_22_handler,
- [23] = atari_slow_irq_23_handler,
- [24] = atari_slow_irq_24_handler,
- [25] = atari_slow_irq_25_handler,
- [26] = atari_slow_irq_26_handler,
- [27] = atari_slow_irq_27_handler,
- [28] = atari_slow_irq_28_handler,
- [29] = atari_slow_irq_29_handler,
- [30] = atari_slow_irq_30_handler,
- [31] = atari_slow_irq_31_handler
-};
-
-asmlinkage void atari_fast_irq_handler( void );
-asmlinkage void atari_prio_irq_handler( void );
-
-/* Dummy function to allow asm with operands. */
-void atari_fast_prio_irq_dummy (void) {
-__asm__ (__ALIGN_STR "\n"
-"atari_fast_irq_handler:\n\t"
- "orw #0x700,%%sr\n" /* disable all interrupts */
-"atari_prio_irq_handler:\n\t"
- "addl %3,%2\n\t" /* preempt_count() += HARDIRQ_OFFSET */
- SAVE_ALL_INT "\n\t"
- GET_CURRENT(%%d0) "\n\t"
- /* get vector number from stack frame and convert to source */
- "bfextu %%sp@(%c1){#4,#10},%%d0\n\t"
- "subw #(0x40-8),%%d0\n\t"
- "jpl 1f\n\t"
- "addw #(0x40-8-0x18),%%d0\n"
- "1:\tlea %a0,%%a0\n\t"
- "addql #1,%%a0@(%%d0:l:4)\n\t"
- "lea irq_handler,%%a0\n\t"
- "lea %%a0@(%%d0:l:8),%%a0\n\t"
- "pea %%sp@\n\t" /* push frame address */
- "movel %%a0@(4),%%sp@-\n\t" /* push handler data */
- "movel %%d0,%%sp@-\n\t" /* push int number */
- "movel %%a0@,%%a0\n\t"
- "jsr %%a0@\n\t" /* and call the handler */
- "addql #8,%%sp\n\t"
- "addql #4,%%sp\n\t"
- "jbra ret_from_interrupt"
- : : "i" (&kstat_cpu(0).irqs), "n" (PT_OFF_FORMATVEC),
- "m" (preempt_count()), "di" (HARDIRQ_OFFSET)
-);
- for (;;);
-}
-#endif
/*
* Bitmap for free interrupt vector numbers
extern int atari_SCC_reset_done;
-static int atari_startup_irq(unsigned int irq)
+static unsigned int atari_irq_startup(struct irq_data *data)
{
- m68k_irq_startup(irq);
+ unsigned int irq = data->irq;
+
+ m68k_irq_startup(data);
atari_turnon_irq(irq);
atari_enable_irq(irq);
return 0;
}
-static void atari_shutdown_irq(unsigned int irq)
+static void atari_irq_shutdown(struct irq_data *data)
{
+ unsigned int irq = data->irq;
+
atari_disable_irq(irq);
atari_turnoff_irq(irq);
- m68k_irq_shutdown(irq);
+ m68k_irq_shutdown(data);
if (irq == IRQ_AUTO_4)
vectors[VEC_INT4] = falcon_hblhandler;
}
-static struct irq_controller atari_irq_controller = {
+static void atari_irq_enable(struct irq_data *data)
+{
+ atari_enable_irq(data->irq);
+}
+
+static void atari_irq_disable(struct irq_data *data)
+{
+ atari_disable_irq(data->irq);
+}
+
+static struct irq_chip atari_irq_chip = {
.name = "atari",
- .lock = __SPIN_LOCK_UNLOCKED(atari_irq_controller.lock),
- .startup = atari_startup_irq,
- .shutdown = atari_shutdown_irq,
- .enable = atari_enable_irq,
- .disable = atari_disable_irq,
+ .irq_startup = atari_irq_startup,
+ .irq_shutdown = atari_irq_shutdown,
+ .irq_enable = atari_irq_enable,
+ .irq_disable = atari_irq_disable,
};
/*
void __init atari_init_IRQ(void)
{
- m68k_setup_user_interrupt(VEC_USER, NUM_ATARI_SOURCES - IRQ_USER, NULL);
- m68k_setup_irq_controller(&atari_irq_controller, 1, NUM_ATARI_SOURCES - 1);
+ m68k_setup_user_interrupt(VEC_USER, NUM_ATARI_SOURCES - IRQ_USER);
+ m68k_setup_irq_controller(&atari_irq_chip, handle_simple_irq, 1,
+ NUM_ATARI_SOURCES - 1);
/* Initialize the MFP(s) */
*/
static void __init bvme6000_init_IRQ(void)
{
- m68k_setup_user_interrupt(VEC_USER, 192, NULL);
+ m68k_setup_user_interrupt(VEC_USER, 192);
}
void __init config_bvme6000(void)
asm volatile(" movpw %0,%1@(5)" : : "d" (INTVAL), "a" (CLOCKBASE));
- if (request_irq(IRQ_AUTO_6, hp300_tick, IRQ_FLG_STD, "timer tick", vector))
+ if (request_irq(IRQ_AUTO_6, hp300_tick, 0, "timer tick", vector))
pr_err("Couldn't register timer interrupt\n");
out_8(CLOCKBASE + CLKCR2, 0x1); /* select CR1 */
#ifdef CONFIG_MMU
+static inline void ack_bad_irq(unsigned int irq)
+{
+ pr_crit("unexpected IRQ trap at vector %02x\n", irq);
+}
+
/* entry.S is sensitive to the offsets of these fields */
typedef struct {
unsigned int __softirq_pending;
#ifdef CONFIG_MMU
-#include <linux/linkage.h>
-#include <linux/hardirq.h>
-#include <linux/irqreturn.h>
-#include <linux/spinlock_types.h>
-
/*
* Interrupt source definitions
* General interrupt sources are the level 1-7.
#define IRQ_USER 8
-extern unsigned int irq_canonicalize(unsigned int irq);
-
-struct pt_regs;
-
/*
* various flags for request_irq() - the Amiga now uses the standard
* mechanism like all other architectures - IRQF_DISABLED and
#define IRQ_FLG_STD (0x8000) /* internally used */
#endif
-/*
- * This structure is used to chain together the ISRs for a particular
- * interrupt source (if it supports chaining).
- */
-typedef struct irq_node {
- irqreturn_t (*handler)(int, void *);
- void *dev_id;
- struct irq_node *next;
- unsigned long flags;
- const char *devname;
-} irq_node_t;
-
-/*
- * This structure has only 4 elements for speed reasons
- */
-struct irq_handler {
- int (*handler)(int, void *);
- unsigned long flags;
- void *dev_id;
- const char *devname;
-};
-
-struct irq_controller {
- const char *name;
- spinlock_t lock;
- int (*startup)(unsigned int irq);
- void (*shutdown)(unsigned int irq);
- void (*enable)(unsigned int irq);
- void (*disable)(unsigned int irq);
-};
-
-extern int m68k_irq_startup(unsigned int);
-extern void m68k_irq_shutdown(unsigned int);
-
-/*
- * This function returns a new irq_node_t
- */
-extern irq_node_t *new_irq_node(void);
+struct irq_data;
+struct irq_chip;
+struct irq_desc;
+extern unsigned int m68k_irq_startup(struct irq_data *data);
+extern unsigned int m68k_irq_startup_irq(unsigned int irq);
+extern void m68k_irq_shutdown(struct irq_data *data);
+extern void m68k_setup_auto_interrupt(void (*handler)(unsigned int,
+ struct pt_regs *));
+extern void m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt);
+extern void m68k_setup_irq_controller(struct irq_chip *,
+ void (*handle)(unsigned int irq,
+ struct irq_desc *desc),
+ unsigned int irq, unsigned int cnt);
-extern void m68k_setup_auto_interrupt(void (*handler)(unsigned int, struct pt_regs *));
-extern void m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt,
- void (*handler)(unsigned int, struct pt_regs *));
-extern void m68k_setup_irq_controller(struct irq_controller *, unsigned int, unsigned int);
-
-asmlinkage void m68k_handle_int(unsigned int);
-asmlinkage void __m68k_handle_int(unsigned int, struct pt_regs *);
+extern unsigned int irq_canonicalize(unsigned int irq);
#else
#define irq_canonicalize(irq) (irq)
#endif /* CONFIG_MMU */
asmlinkage void do_IRQ(int irq, struct pt_regs *regs);
+extern atomic_t irq_err_count;
#endif /* _M68K_IRQ_H_ */
extern void mac_poweroff(void);
extern void mac_init_IRQ(void);
extern int mac_irq_pending(unsigned int);
+extern void mac_irq_enable(struct irq_data *data);
+extern void mac_irq_disable(struct irq_data *data);
/*
* Floppy driver magic hook - probably shouldn't be here
#define Q40_IRQ10_MASK (1<<5)
#define Q40_IRQ14_MASK (1<<6)
#define Q40_IRQ15_MASK (1<<7)
-
-extern unsigned long q40_probe_irq_on (void);
-extern int q40_probe_irq_off (unsigned long irqs);
extra-$(CONFIG_SUN3) := sun3-head.o
extra-y += vmlinux.lds
-obj-y := entry.o m68k_ksyms.o module.o process.o ptrace.o setup.o signal.o \
- sys_m68k.o syscalltable.o time.o traps.o
+obj-y := entry.o irq.o m68k_ksyms.o module.o process.o ptrace.o setup.o \
+ signal.o sys_m68k.o syscalltable.o time.o traps.o
-obj-$(CONFIG_MMU) += ints.o devres.o vectors.o
-devres-$(CONFIG_MMU) = ../../../kernel/irq/devres.o
+obj-$(CONFIG_MMU) += ints.o vectors.o
ifndef CONFIG_MMU_SUN3
obj-y += dma.o
endif
ifndef CONFIG_MMU
-obj-y += init_task.o irq.o
+obj-y += init_task.o
endif
.globl sys_fork, sys_clone, sys_vfork
.globl ret_from_interrupt, bad_interrupt
.globl auto_irqhandler_fixup
-.globl user_irqvec_fixup, user_irqhandler_fixup
+.globl user_irqvec_fixup
.text
ENTRY(buserr)
movel %sp,%sp@-
movel %d0,%sp@- | put vector # on stack
auto_irqhandler_fixup = . + 2
- jsr __m68k_handle_int | process the IRQ
+ jsr do_IRQ | process the IRQ
addql #8,%sp | pop parameters off stack
ret_from_interrupt:
movel %sp,%sp@-
movel %d0,%sp@- | put vector # on stack
-user_irqhandler_fixup = . + 2
- jsr __m68k_handle_int | process the IRQ
+ jsr do_IRQ | process the IRQ
addql #8,%sp | pop parameters off stack
subqb #1,%curptr@(TASK_INFO+TINFO_PREEMPT+1)
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive
* for more details.
- *
- * 07/03/96: Timer initialization, and thus mach_sched_init(),
- * removed from request_irq() and moved to init_time().
- * We should therefore consider renaming our add_isr() and
- * remove_isr() to request_irq() and free_irq()
- * respectively, so they are compliant with the other
- * architectures. /Jes
- * 11/07/96: Changed all add_/remove_isr() to request_/free_irq() calls.
- * Removed irq list support, if any machine needs an irq server
- * it must implement this itself (as it's already done), instead
- * only default handler are used with mach_default_handler.
- * request_irq got some flags different from other architectures:
- * - IRQ_FLG_REPLACE : Replace an existing handler (the default one
- * can be replaced without this flag)
- * - IRQ_FLG_LOCK : handler can't be replaced
- * There are other machine depending flags, see there
- * If you want to replace a default handler you should know what
- * you're doing, since it might handle different other irq sources
- * which must be served /Roman Zippel
*/
#include <linux/module.h>
#endif
extern u32 auto_irqhandler_fixup[];
-extern u32 user_irqhandler_fixup[];
extern u16 user_irqvec_fixup[];
-/* table for system interrupt handlers */
-static struct irq_node *irq_list[NR_IRQS];
-static struct irq_controller *irq_controller[NR_IRQS];
-static int irq_depth[NR_IRQS];
-
static int m68k_first_user_vec;
-static struct irq_controller auto_irq_controller = {
+static struct irq_chip auto_irq_chip = {
.name = "auto",
- .lock = __SPIN_LOCK_UNLOCKED(auto_irq_controller.lock),
- .startup = m68k_irq_startup,
- .shutdown = m68k_irq_shutdown,
+ .irq_startup = m68k_irq_startup,
+ .irq_shutdown = m68k_irq_shutdown,
};
-static struct irq_controller user_irq_controller = {
+static struct irq_chip user_irq_chip = {
.name = "user",
- .lock = __SPIN_LOCK_UNLOCKED(user_irq_controller.lock),
- .startup = m68k_irq_startup,
- .shutdown = m68k_irq_shutdown,
+ .irq_startup = m68k_irq_startup,
+ .irq_shutdown = m68k_irq_shutdown,
};
-#define NUM_IRQ_NODES 100
-static irq_node_t nodes[NUM_IRQ_NODES];
-
/*
* void init_IRQ(void)
*
}
for (i = IRQ_AUTO_1; i <= IRQ_AUTO_7; i++)
- irq_controller[i] = &auto_irq_controller;
+ irq_set_chip_and_handler(i, &auto_irq_chip, handle_simple_irq);
mach_init_IRQ();
}
* @handler: called from auto vector interrupts
*
* setup the handler to be called from auto vector interrupts instead of the
- * standard __m68k_handle_int(), it will be called with irq numbers in the range
+ * standard do_IRQ(), it will be called with irq numbers in the range
* from IRQ_AUTO_1 - IRQ_AUTO_7.
*/
void __init m68k_setup_auto_interrupt(void (*handler)(unsigned int, struct pt_regs *))
* m68k_setup_user_interrupt
* @vec: first user vector interrupt to handle
* @cnt: number of active user vector interrupts
- * @handler: called from user vector interrupts
*
* setup user vector interrupts, this includes activating the specified range
* of interrupts, only then these interrupts can be requested (note: this is
- * different from auto vector interrupts). An optional handler can be installed
- * to be called instead of the default __m68k_handle_int(), it will be called
- * with irq numbers starting from IRQ_USER.
+ * different from auto vector interrupts).
*/
-void __init m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt,
- void (*handler)(unsigned int, struct pt_regs *))
+void __init m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt)
{
int i;
BUG_ON(IRQ_USER + cnt > NR_IRQS);
m68k_first_user_vec = vec;
for (i = 0; i < cnt; i++)
- irq_controller[IRQ_USER + i] = &user_irq_controller;
+ irq_set_chip(IRQ_USER + i, &user_irq_chip);
*user_irqvec_fixup = vec - IRQ_USER;
- if (handler)
- *user_irqhandler_fixup = (u32)handler;
flush_icache();
}
/**
* m68k_setup_irq_controller
- * @contr: irq controller which controls specified irq
+ * @chip: irq chip which controls specified irq
+ * @handle: flow handler which handles specified irq
* @irq: first irq to be managed by the controller
+ * @cnt: number of irqs to be managed by the controller
*
* Change the controller for the specified range of irq, which will be used to
* manage these irq. auto/user irq already have a default controller, which can
* be changed as well, but the controller probably should use m68k_irq_startup/
* m68k_irq_shutdown.
*/
-void m68k_setup_irq_controller(struct irq_controller *contr, unsigned int irq,
+void m68k_setup_irq_controller(struct irq_chip *chip,
+ irq_flow_handler_t handle, unsigned int irq,
unsigned int cnt)
{
int i;
- for (i = 0; i < cnt; i++)
- irq_controller[irq + i] = contr;
-}
-
-irq_node_t *new_irq_node(void)
-{
- irq_node_t *node;
- short i;
-
- for (node = nodes, i = NUM_IRQ_NODES-1; i >= 0; node++, i--) {
- if (!node->handler) {
- memset(node, 0, sizeof(*node));
- return node;
- }
+ for (i = 0; i < cnt; i++) {
+ irq_set_chip(irq + i, chip);
+ if (handle)
+ irq_set_handler(irq + i, handle);
}
-
- printk ("new_irq_node: out of nodes\n");
- return NULL;
}
-int setup_irq(unsigned int irq, struct irq_node *node)
-{
- struct irq_controller *contr;
- struct irq_node **prev;
- unsigned long flags;
-
- if (irq >= NR_IRQS || !(contr = irq_controller[irq])) {
- printk("%s: Incorrect IRQ %d from %s\n",
- __func__, irq, node->devname);
- return -ENXIO;
- }
-
- spin_lock_irqsave(&contr->lock, flags);
-
- prev = irq_list + irq;
- if (*prev) {
- /* Can't share interrupts unless both agree to */
- if (!((*prev)->flags & node->flags & IRQF_SHARED)) {
- spin_unlock_irqrestore(&contr->lock, flags);
- return -EBUSY;
- }
- while (*prev)
- prev = &(*prev)->next;
- }
-
- if (!irq_list[irq]) {
- if (contr->startup)
- contr->startup(irq);
- else
- contr->enable(irq);
- }
- node->next = NULL;
- *prev = node;
-
- spin_unlock_irqrestore(&contr->lock, flags);
-
- return 0;
-}
-
-int request_irq(unsigned int irq,
- irq_handler_t handler,
- unsigned long flags, const char *devname, void *dev_id)
-{
- struct irq_node *node;
- int res;
-
- node = new_irq_node();
- if (!node)
- return -ENOMEM;
-
- node->handler = handler;
- node->flags = flags;
- node->dev_id = dev_id;
- node->devname = devname;
-
- res = setup_irq(irq, node);
- if (res)
- node->handler = NULL;
-
- return res;
-}
-
-EXPORT_SYMBOL(request_irq);
-
-void free_irq(unsigned int irq, void *dev_id)
-{
- struct irq_controller *contr;
- struct irq_node **p, *node;
- unsigned long flags;
-
- if (irq >= NR_IRQS || !(contr = irq_controller[irq])) {
- printk("%s: Incorrect IRQ %d\n", __func__, irq);
- return;
- }
-
- spin_lock_irqsave(&contr->lock, flags);
-
- p = irq_list + irq;
- while ((node = *p)) {
- if (node->dev_id == dev_id)
- break;
- p = &node->next;
- }
-
- if (node) {
- *p = node->next;
- node->handler = NULL;
- } else
- printk("%s: Removing probably wrong IRQ %d\n",
- __func__, irq);
-
- if (!irq_list[irq]) {
- if (contr->shutdown)
- contr->shutdown(irq);
- else
- contr->disable(irq);
- }
-
- spin_unlock_irqrestore(&contr->lock, flags);
-}
-
-EXPORT_SYMBOL(free_irq);
-
-void enable_irq(unsigned int irq)
-{
- struct irq_controller *contr;
- unsigned long flags;
-
- if (irq >= NR_IRQS || !(contr = irq_controller[irq])) {
- printk("%s: Incorrect IRQ %d\n",
- __func__, irq);
- return;
- }
-
- spin_lock_irqsave(&contr->lock, flags);
- if (irq_depth[irq]) {
- if (!--irq_depth[irq]) {
- if (contr->enable)
- contr->enable(irq);
- }
- } else
- WARN_ON(1);
- spin_unlock_irqrestore(&contr->lock, flags);
-}
-
-EXPORT_SYMBOL(enable_irq);
-
-void disable_irq(unsigned int irq)
-{
- struct irq_controller *contr;
- unsigned long flags;
-
- if (irq >= NR_IRQS || !(contr = irq_controller[irq])) {
- printk("%s: Incorrect IRQ %d\n",
- __func__, irq);
- return;
- }
-
- spin_lock_irqsave(&contr->lock, flags);
- if (!irq_depth[irq]++) {
- if (contr->disable)
- contr->disable(irq);
- }
- spin_unlock_irqrestore(&contr->lock, flags);
-}
-
-EXPORT_SYMBOL(disable_irq);
-
-void disable_irq_nosync(unsigned int irq) __attribute__((alias("disable_irq")));
-
-EXPORT_SYMBOL(disable_irq_nosync);
-
-int m68k_irq_startup(unsigned int irq)
+unsigned int m68k_irq_startup_irq(unsigned int irq)
{
if (irq <= IRQ_AUTO_7)
vectors[VEC_SPUR + irq] = auto_inthandler;
return 0;
}
-void m68k_irq_shutdown(unsigned int irq)
+unsigned int m68k_irq_startup(struct irq_data *data)
{
- if (irq <= IRQ_AUTO_7)
- vectors[VEC_SPUR + irq] = bad_inthandler;
- else
- vectors[m68k_first_user_vec + irq - IRQ_USER] = bad_inthandler;
+ return m68k_irq_startup_irq(data->irq);
}
-
-/*
- * Do we need these probe functions on the m68k?
- *
- * ... may be useful with ISA devices
- */
-unsigned long probe_irq_on (void)
+void m68k_irq_shutdown(struct irq_data *data)
{
-#ifdef CONFIG_Q40
- if (MACH_IS_Q40)
- return q40_probe_irq_on();
-#endif
- return 0;
-}
+ unsigned int irq = data->irq;
-EXPORT_SYMBOL(probe_irq_on);
-
-int probe_irq_off (unsigned long irqs)
-{
-#ifdef CONFIG_Q40
- if (MACH_IS_Q40)
- return q40_probe_irq_off(irqs);
-#endif
- return 0;
+ if (irq <= IRQ_AUTO_7)
+ vectors[VEC_SPUR + irq] = bad_inthandler;
+ else
+ vectors[m68k_first_user_vec + irq - IRQ_USER] = bad_inthandler;
}
-EXPORT_SYMBOL(probe_irq_off);
unsigned int irq_canonicalize(unsigned int irq)
{
EXPORT_SYMBOL(irq_canonicalize);
-asmlinkage void m68k_handle_int(unsigned int irq)
-{
- struct irq_node *node;
- kstat_cpu(0).irqs[irq]++;
- node = irq_list[irq];
- do {
- node->handler(irq, node->dev_id);
- node = node->next;
- } while (node);
-}
-
-asmlinkage void __m68k_handle_int(unsigned int irq, struct pt_regs *regs)
-{
- struct pt_regs *old_regs;
- old_regs = set_irq_regs(regs);
- m68k_handle_int(irq);
- set_irq_regs(old_regs);
-}
asmlinkage void handle_badint(struct pt_regs *regs)
{
- kstat_cpu(0).irqs[0]++;
- printk("unexpected interrupt from %u\n", regs->vector);
-}
-
-int show_interrupts(struct seq_file *p, void *v)
-{
- struct irq_controller *contr;
- struct irq_node *node;
- int i = *(loff_t *) v;
-
- /* autovector interrupts */
- if (irq_list[i]) {
- contr = irq_controller[i];
- node = irq_list[i];
- seq_printf(p, "%-8s %3u: %10u %s", contr->name, i, kstat_cpu(0).irqs[i], node->devname);
- while ((node = node->next))
- seq_printf(p, ", %s", node->devname);
- seq_puts(p, "\n");
- }
- return 0;
-}
-
-#ifdef CONFIG_PROC_FS
-void init_irq_proc(void)
-{
- /* Insert /proc/irq driver here */
+ atomic_inc(&irq_err_count);
+ pr_warn("unexpected interrupt from %u\n", regs->vector);
}
-#endif
#include <linux/mm.h>
#include <linux/delay.h>
#include <linux/init.h>
+#include <linux/irq.h>
#include <asm/traps.h>
#include <asm/bootinfo.h>
/* #define DEBUG_IRQS */
-extern void mac_enable_irq(unsigned int);
-extern void mac_disable_irq(unsigned int);
-
int baboon_present;
static volatile struct baboon *baboon;
static unsigned char baboon_disabled;
* Baboon interrupt handler. This works a lot like a VIA.
*/
-static irqreturn_t baboon_irq(int irq, void *dev_id)
+static void baboon_irq(unsigned int irq, struct irq_desc *desc)
{
int irq_bit, irq_num;
unsigned char events;
(uint) baboon->mb_status);
#endif
- if (!(events = baboon->mb_ifr & 0x07))
- return IRQ_NONE;
+ events = baboon->mb_ifr & 0x07;
+ if (!events)
+ return;
irq_num = IRQ_BABOON_0;
irq_bit = 1;
do {
if (events & irq_bit) {
baboon->mb_ifr &= ~irq_bit;
- m68k_handle_int(irq_num);
+ generic_handle_irq(irq_num);
}
irq_bit <<= 1;
irq_num++;
/* for now we need to smash all interrupts */
baboon->mb_ifr &= ~events;
#endif
- return IRQ_HANDLED;
}
/*
void __init baboon_register_interrupts(void)
{
baboon_disabled = 0;
- if (request_irq(IRQ_NUBUS_C, baboon_irq, 0, "baboon", (void *)baboon))
- pr_err("Couldn't register baboon interrupt\n");
+ irq_set_chained_handler(IRQ_NUBUS_C, baboon_irq);
}
/*
baboon_disabled &= ~(1 << irq_idx);
if (!baboon_disabled)
- mac_enable_irq(IRQ_NUBUS_C);
+ mac_irq_enable(irq_get_irq_data(IRQ_NUBUS_C));
}
void baboon_irq_disable(int irq)
baboon_disabled |= 1 << irq_idx;
if (baboon_disabled)
- mac_disable_irq(IRQ_NUBUS_C);
+ mac_irq_disable(irq_get_irq_data(IRQ_NUBUS_C));
}
void baboon_irq_clear(int irq)
{
if (iop_ism_present) {
if (oss_present) {
- if (request_irq(OSS_IRQLEV_IOPISM, iop_ism_irq,
- IRQ_FLG_LOCK, "ISM IOP",
- (void *) IOP_NUM_ISM))
+ if (request_irq(OSS_IRQLEV_IOPISM, iop_ism_irq, 0,
+ "ISM IOP", (void *)IOP_NUM_ISM))
pr_err("Couldn't register ISM IOP interrupt\n");
oss_irq_enable(IRQ_MAC_ADB);
} else {
- if (request_irq(IRQ_VIA2_0, iop_ism_irq,
- IRQ_FLG_LOCK|IRQ_FLG_FAST, "ISM IOP",
- (void *) IOP_NUM_ISM))
+ if (request_irq(IRQ_VIA2_0, iop_ism_irq, 0, "ISM IOP",
+ (void *)IOP_NUM_ISM))
pr_err("Couldn't register ISM IOP interrupt\n");
}
if (!iop_alive(iop_base[IOP_NUM_ISM])) {
/* #define DEBUG_MACINTS */
-void mac_enable_irq(unsigned int irq);
-void mac_disable_irq(unsigned int irq);
-
-static struct irq_controller mac_irq_controller = {
+static struct irq_chip mac_irq_chip = {
.name = "mac",
- .lock = __SPIN_LOCK_UNLOCKED(mac_irq_controller.lock),
- .enable = mac_enable_irq,
- .disable = mac_disable_irq,
+ .irq_enable = mac_irq_enable,
+ .irq_disable = mac_irq_disable,
};
void __init mac_init_IRQ(void)
#ifdef DEBUG_MACINTS
printk("mac_init_IRQ(): Setting things up...\n");
#endif
- m68k_setup_irq_controller(&mac_irq_controller, IRQ_USER,
+ m68k_setup_irq_controller(&mac_irq_chip, handle_simple_irq, IRQ_USER,
NUM_MAC_SOURCES - IRQ_USER);
/* Make sure the SONIC interrupt is cleared or things get ugly */
#ifdef SHUTUP_SONIC
}
/*
- * mac_enable_irq - enable an interrupt source
- * mac_disable_irq - disable an interrupt source
+ * mac_irq_enable - enable an interrupt source
+ * mac_irq_disable - disable an interrupt source
* mac_clear_irq - clears a pending interrupt
- * mac_pending_irq - Returns the pending status of an IRQ (nonzero = pending)
+ * mac_irq_pending - returns the pending status of an IRQ (nonzero = pending)
*
* These routines are just dispatchers to the VIA/OSS/PSC routines.
*/
-void mac_enable_irq(unsigned int irq)
+void mac_irq_enable(struct irq_data *data)
{
+ int irq = data->irq;
int irq_src = IRQ_SRC(irq);
switch(irq_src) {
}
}
-void mac_disable_irq(unsigned int irq)
+void mac_irq_disable(struct irq_data *data)
{
+ int irq = data->irq;
int irq_src = IRQ_SRC(irq);
switch(irq_src) {
#include <linux/mm.h>
#include <linux/delay.h>
#include <linux/init.h>
+#include <linux/irq.h>
#include <asm/bootinfo.h>
#include <asm/macintosh.h>
int oss_present;
volatile struct mac_oss *oss;
-static irqreturn_t oss_irq(int, void *);
-static irqreturn_t oss_nubus_irq(int, void *);
-
-extern irqreturn_t via1_irq(int, void *);
+extern void via1_irq(unsigned int irq, struct irq_desc *desc);
/*
* Initialize the OSS
oss->irq_level[OSS_VIA1] = OSS_IRQLEV_VIA1;
}
-/*
- * Register the OSS and NuBus interrupt dispatchers.
- */
-
-void __init oss_register_interrupts(void)
-{
- if (request_irq(OSS_IRQLEV_SCSI, oss_irq, IRQ_FLG_LOCK,
- "scsi", (void *) oss))
- pr_err("Couldn't register %s interrupt\n", "scsi");
- if (request_irq(OSS_IRQLEV_NUBUS, oss_nubus_irq, IRQ_FLG_LOCK,
- "nubus", (void *) oss))
- pr_err("Couldn't register %s interrupt\n", "nubus");
- if (request_irq(OSS_IRQLEV_SOUND, oss_irq, IRQ_FLG_LOCK,
- "sound", (void *) oss))
- pr_err("Couldn't register %s interrupt\n", "sound");
- if (request_irq(OSS_IRQLEV_VIA1, via1_irq, IRQ_FLG_LOCK,
- "via1", (void *) via1))
- pr_err("Couldn't register %s interrupt\n", "via1");
-}
-
/*
* Initialize OSS for Nubus access
*/
* and SCSI; everything else is routed to its own autovector IRQ.
*/
-static irqreturn_t oss_irq(int irq, void *dev_id)
+static void oss_irq(unsigned int irq, struct irq_desc *desc)
{
int events;
events = oss->irq_pending & (OSS_IP_SOUND|OSS_IP_SCSI);
if (!events)
- return IRQ_NONE;
+ return;
#ifdef DEBUG_IRQS
if ((console_loglevel == 10) && !(events & OSS_IP_SCSI)) {
- printk("oss_irq: irq %d events = 0x%04X\n", irq,
+ printk("oss_irq: irq %u events = 0x%04X\n", irq,
(int) oss->irq_pending);
}
#endif
/* FIXME: call sound handler */
} else if (events & OSS_IP_SCSI) {
oss->irq_pending &= ~OSS_IP_SCSI;
- m68k_handle_int(IRQ_MAC_SCSI);
+ generic_handle_irq(IRQ_MAC_SCSI);
} else {
/* FIXME: error check here? */
}
- return IRQ_HANDLED;
}
/*
* Unlike the VIA/RBV this is on its own autovector interrupt level.
*/
-static irqreturn_t oss_nubus_irq(int irq, void *dev_id)
+static void oss_nubus_irq(unsigned int irq, struct irq_desc *desc)
{
int events, irq_bit, i;
events = oss->irq_pending & OSS_IP_NUBUS;
if (!events)
- return IRQ_NONE;
+ return;
#ifdef DEBUG_NUBUS_INT
if (console_loglevel > 7) {
irq_bit >>= 1;
if (events & irq_bit) {
oss->irq_pending &= ~irq_bit;
- m68k_handle_int(NUBUS_SOURCE_BASE + i);
+ generic_handle_irq(NUBUS_SOURCE_BASE + i);
}
} while(events & (irq_bit - 1));
- return IRQ_HANDLED;
+}
+
+/*
+ * Register the OSS and NuBus interrupt dispatchers.
+ */
+
+void __init oss_register_interrupts(void)
+{
+ irq_set_chained_handler(OSS_IRQLEV_SCSI, oss_irq);
+ irq_set_chained_handler(OSS_IRQLEV_NUBUS, oss_nubus_irq);
+ irq_set_chained_handler(OSS_IRQLEV_SOUND, oss_irq);
+ irq_set_chained_handler(OSS_IRQLEV_VIA1, via1_irq);
}
/*
#include <linux/mm.h>
#include <linux/delay.h>
#include <linux/init.h>
+#include <linux/irq.h>
#include <asm/traps.h>
#include <asm/bootinfo.h>
int psc_present;
volatile __u8 *psc;
-irqreturn_t psc_irq(int, void *);
-
/*
* Debugging dump, used in various places to see what's going on.
*/
}
}
-/*
- * Register the PSC interrupt dispatchers for autovector interrupts 3-6.
- */
-
-void __init psc_register_interrupts(void)
-{
- if (request_irq(IRQ_AUTO_3, psc_irq, 0, "psc3", (void *) 0x30))
- pr_err("Couldn't register psc%d interrupt\n", 3);
- if (request_irq(IRQ_AUTO_4, psc_irq, 0, "psc4", (void *) 0x40))
- pr_err("Couldn't register psc%d interrupt\n", 4);
- if (request_irq(IRQ_AUTO_5, psc_irq, 0, "psc5", (void *) 0x50))
- pr_err("Couldn't register psc%d interrupt\n", 5);
- if (request_irq(IRQ_AUTO_6, psc_irq, 0, "psc6", (void *) 0x60))
- pr_err("Couldn't register psc%d interrupt\n", 6);
-}
-
/*
* PSC interrupt handler. It's a lot like the VIA interrupt handler.
*/
-irqreturn_t psc_irq(int irq, void *dev_id)
+static void psc_irq(unsigned int irq, struct irq_desc *desc)
{
- int pIFR = pIFRbase + ((int) dev_id);
- int pIER = pIERbase + ((int) dev_id);
+ unsigned int offset = (unsigned int)irq_desc_get_handler_data(desc);
+ int pIFR = pIFRbase + offset;
+ int pIER = pIERbase + offset;
int irq_num;
unsigned char irq_bit, events;
#ifdef DEBUG_IRQS
- printk("psc_irq: irq %d pIFR = 0x%02X pIER = 0x%02X\n",
+ printk("psc_irq: irq %u pIFR = 0x%02X pIER = 0x%02X\n",
irq, (int) psc_read_byte(pIFR), (int) psc_read_byte(pIER));
#endif
events = psc_read_byte(pIFR) & psc_read_byte(pIER) & 0xF;
if (!events)
- return IRQ_NONE;
+ return;
irq_num = irq << 3;
irq_bit = 1;
do {
if (events & irq_bit) {
psc_write_byte(pIFR, irq_bit);
- m68k_handle_int(irq_num);
+ generic_handle_irq(irq_num);
}
irq_num++;
irq_bit <<= 1;
} while (events >= irq_bit);
- return IRQ_HANDLED;
+}
+
+/*
+ * Register the PSC interrupt dispatchers for autovector interrupts 3-6.
+ */
+
+void __init psc_register_interrupts(void)
+{
+ irq_set_chained_handler(IRQ_AUTO_3, psc_irq);
+ irq_set_handler_data(IRQ_AUTO_3, (void *)0x30);
+ irq_set_chained_handler(IRQ_AUTO_4, psc_irq);
+ irq_set_handler_data(IRQ_AUTO_4, (void *)0x40);
+ irq_set_chained_handler(IRQ_AUTO_5, psc_irq);
+ irq_set_handler_data(IRQ_AUTO_5, (void *)0x50);
+ irq_set_chained_handler(IRQ_AUTO_6, psc_irq);
+ irq_set_handler_data(IRQ_AUTO_6, (void *)0x60);
}
void psc_irq_enable(int irq) {
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/module.h>
+#include <linux/irq.h>
#include <asm/bootinfo.h>
#include <asm/macintosh.h>
static u8 nubus_disabled;
void via_debug_dump(void);
-irqreturn_t via1_irq(int, void *);
-irqreturn_t via2_irq(int, void *);
-irqreturn_t via_nubus_irq(int, void *);
void via_irq_enable(int irq);
void via_irq_disable(int irq);
void via_irq_clear(int irq);
via1[vT1CL] = MAC_CLOCK_LOW;
via1[vT1CH] = MAC_CLOCK_HIGH;
- if (request_irq(IRQ_MAC_TIMER_1, func, IRQ_FLG_LOCK, "timer", func))
+ if (request_irq(IRQ_MAC_TIMER_1, func, 0, "timer", func))
pr_err("Couldn't register %s interrupt\n", "timer");
}
-/*
- * Register the interrupt dispatchers for VIA or RBV machines only.
- */
-
-void __init via_register_interrupts(void)
-{
- if (via_alt_mapping) {
- if (request_irq(IRQ_AUTO_1, via1_irq,
- IRQ_FLG_LOCK|IRQ_FLG_FAST, "software",
- (void *) via1))
- pr_err("Couldn't register %s interrupt\n", "software");
- if (request_irq(IRQ_AUTO_6, via1_irq,
- IRQ_FLG_LOCK|IRQ_FLG_FAST, "via1",
- (void *) via1))
- pr_err("Couldn't register %s interrupt\n", "via1");
- } else {
- if (request_irq(IRQ_AUTO_1, via1_irq,
- IRQ_FLG_LOCK|IRQ_FLG_FAST, "via1",
- (void *) via1))
- pr_err("Couldn't register %s interrupt\n", "via1");
- }
- if (request_irq(IRQ_AUTO_2, via2_irq, IRQ_FLG_LOCK|IRQ_FLG_FAST,
- "via2", (void *) via2))
- pr_err("Couldn't register %s interrupt\n", "via2");
- if (request_irq(IRQ_MAC_NUBUS, via_nubus_irq,
- IRQ_FLG_LOCK|IRQ_FLG_FAST, "nubus", (void *) via2))
- pr_err("Couldn't register %s interrupt\n", "nubus");
-}
-
/*
* Debugging dump, used in various places to see what's going on.
*/
* via6522.c :-), disable/pending masks added.
*/
-irqreturn_t via1_irq(int irq, void *dev_id)
+void via1_irq(unsigned int irq, struct irq_desc *desc)
{
int irq_num;
unsigned char irq_bit, events;
events = via1[vIFR] & via1[vIER] & 0x7F;
if (!events)
- return IRQ_NONE;
+ return;
irq_num = VIA1_SOURCE_BASE;
irq_bit = 1;
do {
if (events & irq_bit) {
via1[vIFR] = irq_bit;
- m68k_handle_int(irq_num);
+ generic_handle_irq(irq_num);
}
++irq_num;
irq_bit <<= 1;
} while (events >= irq_bit);
- return IRQ_HANDLED;
}
-irqreturn_t via2_irq(int irq, void *dev_id)
+static void via2_irq(unsigned int irq, struct irq_desc *desc)
{
int irq_num;
unsigned char irq_bit, events;
events = via2[gIFR] & via2[gIER] & 0x7F;
if (!events)
- return IRQ_NONE;
+ return;
irq_num = VIA2_SOURCE_BASE;
irq_bit = 1;
do {
if (events & irq_bit) {
via2[gIFR] = irq_bit | rbv_clear;
- m68k_handle_int(irq_num);
+ generic_handle_irq(irq_num);
}
++irq_num;
irq_bit <<= 1;
} while (events >= irq_bit);
- return IRQ_HANDLED;
}
/*
* VIA2 dispatcher as a fast interrupt handler.
*/
-irqreturn_t via_nubus_irq(int irq, void *dev_id)
+void via_nubus_irq(unsigned int irq, struct irq_desc *desc)
{
int slot_irq;
unsigned char slot_bit, events;
else
events &= ~via2[vDirA];
if (!events)
- return IRQ_NONE;
+ return;
do {
slot_irq = IRQ_NUBUS_F;
do {
if (events & slot_bit) {
events &= ~slot_bit;
- m68k_handle_int(slot_irq);
+ generic_handle_irq(slot_irq);
}
--slot_irq;
slot_bit >>= 1;
else
events &= ~via2[vDirA];
} while (events);
- return IRQ_HANDLED;
+}
+
+/*
+ * Register the interrupt dispatchers for VIA or RBV machines only.
+ */
+
+void __init via_register_interrupts(void)
+{
+ if (via_alt_mapping) {
+ /* software interrupt */
+ irq_set_chained_handler(IRQ_AUTO_1, via1_irq);
+ /* via1 interrupt */
+ irq_set_chained_handler(IRQ_AUTO_6, via1_irq);
+ } else {
+ irq_set_chained_handler(IRQ_AUTO_1, via1_irq);
+ }
+ irq_set_chained_handler(IRQ_AUTO_2, via2_irq);
+ irq_set_chained_handler(IRQ_MAC_NUBUS, via_nubus_irq);
}
void via_irq_enable(int irq) {
void __init mvme147_init_IRQ(void)
{
- m68k_setup_user_interrupt(VEC_USER, 192, NULL);
+ m68k_setup_user_interrupt(VEC_USER, 192);
}
void __init config_mvme147(void)
void mvme147_sched_init (irq_handler_t timer_routine)
{
tick_handler = timer_routine;
- if (request_irq(PCC_IRQ_TIMER1, mvme147_timer_int, IRQ_FLG_REPLACE,
- "timer 1", NULL))
+ if (request_irq(PCC_IRQ_TIMER1, mvme147_timer_int, 0, "timer 1", NULL))
pr_err("Couldn't register timer interrupt\n");
/* Init the clock with a value */
static void __init mvme16x_init_IRQ (void)
{
- m68k_setup_user_interrupt(VEC_USER, 192, NULL);
+ m68k_setup_user_interrupt(VEC_USER, 192);
}
#define pcc2chip ((volatile u_char *)0xfff42000)
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
+#include <linux/irq.h>
#include <asm/ptrace.h>
#include <asm/system.h>
-#include <asm/irq.h>
#include <asm/traps.h>
#include <asm/q40_master.h>
*/
static void q40_irq_handler(unsigned int, struct pt_regs *fp);
-static void q40_enable_irq(unsigned int);
-static void q40_disable_irq(unsigned int);
+static void q40_irq_enable(struct irq_data *data);
+static void q40_irq_disable(struct irq_data *data);
unsigned short q40_ablecount[35];
unsigned short q40_state[35];
-static int q40_irq_startup(unsigned int irq)
+static unsigned int q40_irq_startup(struct irq_data *data)
{
+ unsigned int irq = data->irq;
+
/* test for ISA ints not implemented by HW */
switch (irq) {
case 1: case 2: case 8: case 9:
case 11: case 12: case 13:
printk("%s: ISA IRQ %d not implemented by HW\n", __func__, irq);
- return -ENXIO;
+ /* FIXME return -ENXIO; */
}
return 0;
}
-static void q40_irq_shutdown(unsigned int irq)
+static void q40_irq_shutdown(struct irq_data *data)
{
}
-static struct irq_controller q40_irq_controller = {
+static struct irq_chip q40_irq_chip = {
.name = "q40",
- .lock = __SPIN_LOCK_UNLOCKED(q40_irq_controller.lock),
- .startup = q40_irq_startup,
- .shutdown = q40_irq_shutdown,
- .enable = q40_enable_irq,
- .disable = q40_disable_irq,
+ .irq_startup = q40_irq_startup,
+ .irq_shutdown = q40_irq_shutdown,
+ .irq_enable = q40_irq_enable,
+ .irq_disable = q40_irq_disable,
};
/*
void __init q40_init_IRQ(void)
{
- m68k_setup_irq_controller(&q40_irq_controller, 1, Q40_IRQ_MAX);
+ m68k_setup_irq_controller(&q40_irq_chip, handle_simple_irq, 1,
+ Q40_IRQ_MAX);
/* setup handler for ISA ints */
m68k_setup_auto_interrupt(q40_irq_handler);
- m68k_irq_startup(IRQ_AUTO_2);
- m68k_irq_startup(IRQ_AUTO_4);
+ m68k_irq_startup_irq(IRQ_AUTO_2);
+ m68k_irq_startup_irq(IRQ_AUTO_4);
/* now enable some ints.. */
master_outb(1, EXT_ENABLE_REG); /* ISA IRQ 5-15 */
switch (irq) {
case 4:
case 6:
- __m68k_handle_int(Q40_IRQ_SAMPLE, fp);
+ do_IRQ(Q40_IRQ_SAMPLE, fp);
return;
}
if (mir & Q40_IRQ_FRAME_MASK) {
- __m68k_handle_int(Q40_IRQ_FRAME, fp);
+ do_IRQ(Q40_IRQ_FRAME, fp);
master_outb(-1, FRAME_CLEAR_REG);
}
if ((mir & Q40_IRQ_SER_MASK) || (mir & Q40_IRQ_EXT_MASK)) {
goto iirq;
}
q40_state[irq] |= IRQ_INPROGRESS;
- __m68k_handle_int(irq, fp);
+ do_IRQ(irq, fp);
q40_state[irq] &= ~IRQ_INPROGRESS;
/* naively enable everything, if that fails than */
mir = master_inb(IIRQ_REG);
/* should test whether keyboard irq is really enabled, doing it in defhand */
if (mir & Q40_IRQ_KEYB_MASK)
- __m68k_handle_int(Q40_IRQ_KEYBOARD, fp);
+ do_IRQ(Q40_IRQ_KEYBOARD, fp);
return;
}
-void q40_enable_irq(unsigned int irq)
+void q40_irq_enable(struct irq_data *data)
{
+ unsigned int irq = data->irq;
+
if (irq >= 5 && irq <= 15) {
mext_disabled--;
if (mext_disabled > 0)
- printk("q40_enable_irq : nested disable/enable\n");
+ printk("q40_irq_enable : nested disable/enable\n");
if (mext_disabled == 0)
master_outb(1, EXT_ENABLE_REG);
}
}
-void q40_disable_irq(unsigned int irq)
+void q40_irq_disable(struct irq_data *data)
{
+ unsigned int irq = data->irq;
+
/* disable ISA iqs : only do something if the driver has been
* verified to be Q40 "compatible" - right now IDE, NE2K
* Any driver should not attempt to sleep across disable_irq !!
printk("disable_irq nesting count %d\n",mext_disabled);
}
}
-
-unsigned long q40_probe_irq_on(void)
-{
- printk("irq probing not working - reconfigure the driver to avoid this\n");
- return -1;
-}
-int q40_probe_irq_off(unsigned long irqs)
-{
- return -1;
-}
static irqreturn_t sun3_int7(int irq, void *dev_id)
{
- *sun3_intreg |= (1 << irq);
- if (!(kstat_cpu(0).irqs[irq] % 2000))
- sun3_leds(led_pattern[(kstat_cpu(0).irqs[irq] % 16000) / 2000]);
+ unsigned int cnt;
+
+ cnt = kstat_irqs_cpu(irq, 0);
+ if (!(cnt % 2000))
+ sun3_leds(led_pattern[cnt % 16000 / 2000]);
return IRQ_HANDLED;
}
static irqreturn_t sun3_int5(int irq, void *dev_id)
{
+ unsigned int cnt;
+
#ifdef CONFIG_SUN3
intersil_clear();
#endif
- *sun3_intreg |= (1 << irq);
#ifdef CONFIG_SUN3
intersil_clear();
#endif
xtime_update(1);
update_process_times(user_mode(get_irq_regs()));
- if (!(kstat_cpu(0).irqs[irq] % 20))
- sun3_leds(led_pattern[(kstat_cpu(0).irqs[irq] % 160) / 20]);
+ cnt = kstat_irqs_cpu(irq, 0);
+ if (!(cnt % 20))
+ sun3_leds(led_pattern[cnt % 160 / 20]);
return IRQ_HANDLED;
}
return IRQ_HANDLED;
}
-static void sun3_inthandle(unsigned int irq, struct pt_regs *fp)
+static void sun3_irq_enable(struct irq_data *data)
{
- *sun3_intreg &= ~(1 << irq);
+ sun3_enable_irq(data->irq);
+};
- __m68k_handle_int(irq, fp);
-}
+static void sun3_irq_disable(struct irq_data *data)
+{
+ sun3_disable_irq(data->irq);
+};
-static struct irq_controller sun3_irq_controller = {
+static struct irq_chip sun3_irq_chip = {
.name = "sun3",
- .lock = __SPIN_LOCK_UNLOCKED(sun3_irq_controller.lock),
- .startup = m68k_irq_startup,
- .shutdown = m68k_irq_shutdown,
- .enable = sun3_enable_irq,
- .disable = sun3_disable_irq,
+ .irq_startup = m68k_irq_startup,
+ .irq_shutdown = m68k_irq_shutdown,
+ .irq_enable = sun3_irq_enable,
+ .irq_disable = sun3_irq_disable,
+ .irq_mask = sun3_irq_disable,
+ .irq_unmask = sun3_irq_enable,
};
void __init sun3_init_IRQ(void)
{
*sun3_intreg = 1;
- m68k_setup_auto_interrupt(sun3_inthandle);
- m68k_setup_irq_controller(&sun3_irq_controller, IRQ_AUTO_1, 7);
- m68k_setup_user_interrupt(VEC_USER, 128, NULL);
+ m68k_setup_irq_controller(&sun3_irq_chip, handle_level_irq, IRQ_AUTO_1,
+ 7);
+ m68k_setup_user_interrupt(VEC_USER, 128);
if (request_irq(IRQ_AUTO_5, sun3_int5, 0, "int5", NULL))
pr_err("Couldn't register %s interrupt\n", "int5");
archprepare:
ifdef CONFIG_MIPS32_N32
@echo ' Checking missing-syscalls for N32'
- $(Q)$(MAKE) $(build)=. missing-syscalls ccflags-y="-mabi=n32"
+ $(Q)$(MAKE) $(build)=. missing-syscalls missing_syscalls_flags="-mabi=n32"
endif
ifdef CONFIG_MIPS32_O32
@echo ' Checking missing-syscalls for O32'
- $(Q)$(MAKE) $(build)=. missing-syscalls ccflags-y="-mabi=32"
+ $(Q)$(MAKE) $(build)=. missing-syscalls missing_syscalls_flags="-mabi=32"
endif
install:
static struct map_info flash_map;
static struct mtd_info *mymtd;
-static int nr_parts;
-static struct mtd_partition *parts;
static const char *part_probe_types[] = {
"cmdlinepart",
#ifdef CONFIG_MTD_REDBOOT_PARTS
mymtd = do_map_probe("cfi_probe", &flash_map);
if (mymtd) {
mymtd->owner = THIS_MODULE;
-
- nr_parts = parse_mtd_partitions(mymtd,
- part_probe_types,
- &parts, 0);
- mtd_device_register(mymtd, parts, nr_parts);
+ mtd_device_parse_register(mymtd, part_probe_types,
+ 0, NULL, 0);
} else {
pr_err("Failed to register MTD device for flash\n");
}
* the other bits alone.
*/
cvmx_write_csr(CVMX_CIU_MBOX_CLRX(cvmx_get_core_num()), 0xffff);
- if (request_irq(OCTEON_IRQ_MBOX0, mailbox_interrupt, IRQF_DISABLED,
- "SMP-IPI", mailbox_interrupt)) {
+ if (request_irq(OCTEON_IRQ_MBOX0, mailbox_interrupt,
+ IRQF_PERCPU | IRQF_NO_THREAD, "SMP-IPI",
+ mailbox_interrupt)) {
panic("Cannot request_irq(OCTEON_IRQ_MBOX0)\n");
}
}
/* arg[0] is "g", the rest is boot parameters */
for (i = 1; i < argc; i++) {
- if (strlen(arcs_cmdline) + strlen(arg[i] + 1)
+ if (strlen(arcs_cmdline) + strlen(arg[i]) + 1
>= sizeof(arcs_cmdline))
break;
strcat(arcs_cmdline, arg[i]);
return -EINVAL;
}
+#define gpio_get_value_cansleep gpio_get_value
+
static inline void gpio_set_value(unsigned gpio, int value)
{
switch (bcm47xx_bus_type) {
}
}
+#define gpio_set_value_cansleep gpio_set_value
+
+static inline int gpio_cansleep(unsigned gpio)
+{
+ return 0;
+}
+
+static inline int gpio_is_valid(unsigned gpio)
+{
+ return gpio < (BCM47XX_EXTIF_GPIO_LINES + BCM47XX_CHIPCO_GPIO_LINES);
+}
+
+
static inline int gpio_direction_input(unsigned gpio)
{
switch (bcm47xx_bus_type) {
}
-/* cansleep wrappers */
-#include <asm-generic/gpio.h>
-
#endif /* __BCM47XX_GPIO_H */
#define __NR_syncfs (__NR_Linux + 342)
#define __NR_sendmmsg (__NR_Linux + 343)
#define __NR_setns (__NR_Linux + 344)
+#define __NR_process_vm_readv (__NR_Linux + 345)
+#define __NR_process_vm_writev (__NR_Linux + 346)
/*
* Offset of the last Linux o32 flavoured syscall
*/
-#define __NR_Linux_syscalls 344
+#define __NR_Linux_syscalls 346
#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
#define __NR_O32_Linux 4000
-#define __NR_O32_Linux_syscalls 344
+#define __NR_O32_Linux_syscalls 346
#if _MIPS_SIM == _MIPS_SIM_ABI64
#define __NR_syncfs (__NR_Linux + 301)
#define __NR_sendmmsg (__NR_Linux + 302)
#define __NR_setns (__NR_Linux + 303)
+#define __NR_process_vm_readv (__NR_Linux + 304)
+#define __NR_process_vm_writev (__NR_Linux + 305)
/*
* Offset of the last Linux 64-bit flavoured syscall
*/
-#define __NR_Linux_syscalls 303
+#define __NR_Linux_syscalls 305
#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
#define __NR_64_Linux 5000
-#define __NR_64_Linux_syscalls 303
+#define __NR_64_Linux_syscalls 305
#if _MIPS_SIM == _MIPS_SIM_NABI32
#define __NR_syncfs (__NR_Linux + 306)
#define __NR_sendmmsg (__NR_Linux + 307)
#define __NR_setns (__NR_Linux + 308)
+#define __NR_process_vm_readv (__NR_Linux + 309)
+#define __NR_process_vm_writev (__NR_Linux + 310)
/*
* Offset of the last N32 flavoured syscall
*/
-#define __NR_Linux_syscalls 308
+#define __NR_Linux_syscalls 310
#endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
#define __NR_N32_Linux 6000
-#define __NR_N32_Linux_syscalls 308
+#define __NR_N32_Linux_syscalls 310
#ifdef __KERNEL__
/*
* Compare interrupt can be routed and latched outside the core,
- * so a single execution hazard barrier may not be enough to give
- * it time to clear as seen in the Cause register. 4 time the
- * pipeline depth seems reasonably conservative, and empirically
- * works better in configurations with high CPU/bus clock ratios.
+ * so wait up to worst case number of cycle counter ticks for timer interrupt
+ * changes to propagate to the cause register.
*/
-
-#define compare_change_hazard() \
- do { \
- irq_disable_hazard(); \
- irq_disable_hazard(); \
- irq_disable_hazard(); \
- irq_disable_hazard(); \
- } while (0)
+#define COMPARE_INT_SEEN_TICKS 50
int c0_compare_int_usable(void)
{
* IP7 already pending? Try to clear it by acking the timer.
*/
if (c0_compare_int_pending()) {
- write_c0_compare(read_c0_count());
- compare_change_hazard();
+ cnt = read_c0_count();
+ write_c0_compare(cnt);
+ back_to_back_c0_hazard();
+ while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS))
+ if (!c0_compare_int_pending())
+ break;
if (c0_compare_int_pending())
return 0;
}
cnt = read_c0_count();
cnt += delta;
write_c0_compare(cnt);
- compare_change_hazard();
+ back_to_back_c0_hazard();
if ((int)(read_c0_count() - cnt) < 0)
break;
/* increase delta if the timer was already expired */
while ((int)(read_c0_count() - cnt) <= 0)
; /* Wait for expiry */
- compare_change_hazard();
+ while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS))
+ if (c0_compare_int_pending())
+ break;
if (!c0_compare_int_pending())
return 0;
-
- write_c0_compare(read_c0_count());
- compare_change_hazard();
+ cnt = read_c0_count();
+ write_c0_compare(cnt);
+ back_to_back_c0_hazard();
+ while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS))
+ if (!c0_compare_int_pending())
+ break;
if (c0_compare_int_pending())
return 0;
* for more details.
*/
+#include <linux/module.h>
#include <linux/cpufreq.h>
#include <linux/platform_device.h>
sys sys_syncfs 1
sys sys_sendmmsg 4
sys sys_setns 2
+ sys sys_process_vm_readv 6 /* 4345 */
+ sys sys_process_vm_writev 6
.endm
/* We pre-compute the number of _instruction_ bytes needed to
PTR sys_syncfs
PTR sys_sendmmsg
PTR sys_setns
+ PTR sys_process_vm_readv
+ PTR sys_process_vm_writev /* 5305 */
.size sys_call_table,.-sys_call_table
PTR sys_syncfs
PTR compat_sys_sendmmsg
PTR sys_setns
+ PTR compat_sys_process_vm_readv
+ PTR compat_sys_process_vm_writev /* 6310 */
.size sysn32_call_table,.-sysn32_call_table
PTR sys_syncfs
PTR compat_sys_sendmmsg
PTR sys_setns
+ PTR compat_sys_process_vm_readv /* 4345 */
+ PTR compat_sys_process_vm_writev
.size sys_call_table,.-sys_call_table
}
#endif /* CONFIG_MIPS_MT_SMTC */
- cpu_data[cpu].asid_cache = ASID_FIRST_VERSION;
+ if (!cpu_data[cpu].asid_cache)
+ cpu_data[cpu].asid_cache = ASID_FIRST_VERSION;
atomic_inc(&init_mm.mm_count);
current->active_mm = &init_mm;
* Copyright (C) 2010 John Crispin <blogic@openwrt.org>
*/
#include <linux/io.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/types.h>
*/
#include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/types.h>
#include <linux/string.h>
#include <linux/kernel.h>
* Copyright (C) 2010 John Crispin <blogic@openwrt.org>
*/
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/clk.h>
#include <asm/bootinfo.h>
#include <asm/time.h>
*/
#include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/io.h>
#include <linux/ioport.h>
#include <asm/bootinfo.h>
*/
#include <linux/io.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/init.h>
#include <linux/clk.h>
*/
#include <linux/io.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/init.h>
#include <linux/clk.h>
*/
#include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/types.h>
#include <linux/string.h>
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/dma-mapping.h>
+#include <linux/export.h>
#include <lantiq_soc.h>
#include <xway_dma.h>
*/
#include <linux/slab.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/ioport.h>
*/
#include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/types.h>
#include <linux/platform_device.h>
#include <linux/mutex.h>
#include <linux/slab.h>
#include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/types.h>
#include <linux/platform_device.h>
#include <linux/mutex.h>
* Copyright (C) 2010 John Crispin <blogic@openwrt.org>
*/
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/clk.h>
#include <asm/bootinfo.h>
#include <asm/time.h>
* Copyright (C) 2010 John Crispin <blogic@openwrt.org>
*/
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/clk.h>
#include <asm/bootinfo.h>
#include <asm/time.h>
#include <linux/io.h>
#include <linux/ioport.h>
#include <linux/pm.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <asm/reboot.h>
#include <lantiq_soc.h>
+++ /dev/null
-/*
- *
- * BRIEF MODULE DESCRIPTION
- *
- * Author: source@mvista.com
- *
- * This program is free software; you can distribute it and/or modify it
- * under the terms of the GNU General Public License (Version 2) as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- */
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <pci.h>
-#include <glb.h>
-#include <nand.h>
-
-static struct resource pci_io_resource = {
- .start = PNX8550_PCIIO + 0x1000, /* reserve regacy I/O space */
- .end = PNX8550_PCIIO + PNX8550_PCIIO_SIZE,
- .name = "pci IO space",
- .flags = IORESOURCE_IO
-};
-
-static struct resource pci_mem_resource = {
- .start = PNX8550_PCIMEM,
- .end = PNX8550_PCIMEM + PNX8550_PCIMEM_SIZE - 1,
- .name = "pci memory space",
- .flags = IORESOURCE_MEM
-};
-
-extern struct pci_ops pnx8550_pci_ops;
-
-static struct pci_controller pnx8550_controller = {
- .pci_ops = &pnx8550_pci_ops,
- .io_map_base = PNX8550_PORT_BASE,
- .io_resource = &pci_io_resource,
- .mem_resource = &pci_mem_resource,
-};
-
-/* Return the total size of DRAM-memory, (RANK0 + RANK1) */
-static inline unsigned long get_system_mem_size(void)
-{
- /* Read IP2031_RANK0_ADDR_LO */
- unsigned long dram_r0_lo = inl(PCI_BASE | 0x65010);
- /* Read IP2031_RANK1_ADDR_HI */
- unsigned long dram_r1_hi = inl(PCI_BASE | 0x65018);
-
- return dram_r1_hi - dram_r0_lo + 1;
-}
-
-static int __init pnx8550_pci_setup(void)
-{
- int pci_mem_code;
- int mem_size = get_system_mem_size() >> 20;
-
- /* Clear the Global 2 Register, PCI Inta Output Enable Registers
- Bit 1:Enable DAC Powerdown
- -> 0:DACs are enabled and are working normally
- 1:DACs are powerdown
- Bit 0:Enable of PCI inta output
- -> 0 = Disable PCI inta output
- 1 = Enable PCI inta output
- */
- PNX8550_GLB2_ENAB_INTA_O = 0;
-
- /* Calc the PCI mem size code */
- if (mem_size >= 128)
- pci_mem_code = SIZE_128M;
- else if (mem_size >= 64)
- pci_mem_code = SIZE_64M;
- else if (mem_size >= 32)
- pci_mem_code = SIZE_32M;
- else
- pci_mem_code = SIZE_16M;
-
- /* Set PCI_XIO registers */
- outl(pci_mem_resource.start, PCI_BASE | PCI_BASE1_LO);
- outl(pci_mem_resource.end + 1, PCI_BASE | PCI_BASE1_HI);
- outl(pci_io_resource.start, PCI_BASE | PCI_BASE2_LO);
- outl(pci_io_resource.end, PCI_BASE | PCI_BASE2_HI);
-
- /* Send memory transaction via PCI_BASE2 */
- outl(0x00000001, PCI_BASE | PCI_IO);
-
- /* Unlock the setup register */
- outl(0xca, PCI_BASE | PCI_UNLOCKREG);
-
- /*
- * BAR0 of PNX8550 (pci base 10) must be zero in order for ide
- * to work, and in order for bus_to_baddr to work without any
- * hacks.
- */
- outl(0x00000000, PCI_BASE | PCI_BASE10);
-
- /*
- *These two bars are set by default or the boot code.
- * However, it's safer to set them here so we're not boot
- * code dependent.
- */
- outl(0x1be00000, PCI_BASE | PCI_BASE14); /* PNX MMIO */
- outl(PNX8550_NAND_BASE_ADDR, PCI_BASE | PCI_BASE18); /* XIO */
-
- outl(PCI_EN_TA |
- PCI_EN_PCI2MMI |
- PCI_EN_XIO |
- PCI_SETUP_BASE18_SIZE(SIZE_32M) |
- PCI_SETUP_BASE18_EN |
- PCI_SETUP_BASE14_EN |
- PCI_SETUP_BASE10_PREF |
- PCI_SETUP_BASE10_SIZE(pci_mem_code) |
- PCI_SETUP_CFGMANAGE_EN |
- PCI_SETUP_PCIARB_EN,
- PCI_BASE |
- PCI_SETUP); /* PCI_SETUP */
- outl(0x00000000, PCI_BASE | PCI_CTRL); /* PCI_CONTROL */
-
- register_pci_controller(&pnx8550_controller);
-
- return 0;
-}
-
-arch_initcall(pnx8550_pci_setup);
+++ /dev/null
-/*
- *
- * 2.6 port, Embedded Alley Solutions, Inc
- *
- * Based on Per Hallsmark, per.hallsmark@mvista.com
- *
- * This program is free software; you can distribute it and/or modify it
- * under the terms of the GNU General Public License (Version 2) as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- */
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/irq.h>
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/serial_pnx8xxx.h>
-#include <linux/pm.h>
-
-#include <asm/cpu.h>
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-#include <asm/mipsregs.h>
-#include <asm/reboot.h>
-#include <asm/pgtable.h>
-#include <asm/time.h>
-
-#include <glb.h>
-#include <int.h>
-#include <pci.h>
-#include <uart.h>
-#include <nand.h>
-
-extern void __init board_setup(void);
-extern void pnx8550_machine_restart(char *);
-extern void pnx8550_machine_halt(void);
-extern void pnx8550_machine_power_off(void);
-extern struct resource ioport_resource;
-extern struct resource iomem_resource;
-extern char *prom_getcmdline(void);
-
-struct resource standard_io_resources[] = {
- {
- .start = 0x00,
- .end = 0x1f,
- .name = "dma1",
- .flags = IORESOURCE_BUSY
- }, {
- .start = 0x40,
- .end = 0x5f,
- .name = "timer",
- .flags = IORESOURCE_BUSY
- }, {
- .start = 0x80,
- .end = 0x8f,
- .name = "dma page reg",
- .flags = IORESOURCE_BUSY
- }, {
- .start = 0xc0,
- .end = 0xdf,
- .name = "dma2",
- .flags = IORESOURCE_BUSY
- },
-};
-
-#define STANDARD_IO_RESOURCES ARRAY_SIZE(standard_io_resources)
-
-extern struct resource pci_io_resource;
-extern struct resource pci_mem_resource;
-
-/* Return the total size of DRAM-memory, (RANK0 + RANK1) */
-unsigned long get_system_mem_size(void)
-{
- /* Read IP2031_RANK0_ADDR_LO */
- unsigned long dram_r0_lo = inl(PCI_BASE | 0x65010);
- /* Read IP2031_RANK1_ADDR_HI */
- unsigned long dram_r1_hi = inl(PCI_BASE | 0x65018);
-
- return dram_r1_hi - dram_r0_lo + 1;
-}
-
-int pnx8550_console_port = -1;
-
-void __init plat_mem_setup(void)
-{
- int i;
- char* argptr;
-
- board_setup(); /* board specific setup */
-
- _machine_restart = pnx8550_machine_restart;
- _machine_halt = pnx8550_machine_halt;
- pm_power_off = pnx8550_machine_power_off;
-
- /* Clear the Global 2 Register, PCI Inta Output Enable Registers
- Bit 1:Enable DAC Powerdown
- -> 0:DACs are enabled and are working normally
- 1:DACs are powerdown
- Bit 0:Enable of PCI inta output
- -> 0 = Disable PCI inta output
- 1 = Enable PCI inta output
- */
- PNX8550_GLB2_ENAB_INTA_O = 0;
-
- /* IO/MEM resources. */
- set_io_port_base(PNX8550_PORT_BASE);
- ioport_resource.start = 0;
- ioport_resource.end = ~0;
- iomem_resource.start = 0;
- iomem_resource.end = ~0;
-
- /* Request I/O space for devices on this board */
- for (i = 0; i < STANDARD_IO_RESOURCES; i++)
- request_resource(&ioport_resource, standard_io_resources + i);
-
- /* Place the Mode Control bit for GPIO pin 16 in primary function */
- /* Pin 16 is used by UART1, UA1_TX */
- outl((PNX8550_GPIO_MODE_PRIMOP << PNX8550_GPIO_MC_16_BIT) |
- (PNX8550_GPIO_MODE_PRIMOP << PNX8550_GPIO_MC_17_BIT),
- PNX8550_GPIO_MC1);
-
- argptr = prom_getcmdline();
- if ((argptr = strstr(argptr, "console=ttyS")) != NULL) {
- argptr += strlen("console=ttyS");
- pnx8550_console_port = *argptr == '0' ? 0 : 1;
-
- /* We must initialize the UART (console) before early printk */
- /* Set LCR to 8-bit and BAUD to 38400 (no 5) */
- ip3106_lcr(UART_BASE, pnx8550_console_port) =
- PNX8XXX_UART_LCR_8BIT;
- ip3106_baud(UART_BASE, pnx8550_console_port) = 5;
- }
-}
* Support for all devices (greater than 16) added by David Gathright.
*/
+#include <linux/export.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/mm.h>
#include <linux/vmalloc.h>
+#include <linux/export.h>
#include <linux/platform_device.h>
#include <asm/pci.h>
/* Get the boot parameters */
for (i = 1; i < argc; i++) {
- if (strlen(arcs_cmdline) + strlen(arg[i] + 1) >=
+ if (strlen(arcs_cmdline) + strlen(arg[i]) + 1 >=
sizeof(arcs_cmdline))
break;
config KEXEC
bool "kexec system call (EXPERIMENTAL)"
- depends on (PPC_BOOK3S || FSL_BOOKE || (44x && !SMP && !47x)) && EXPERIMENTAL
+ depends on (PPC_BOOK3S || FSL_BOOKE || (44x && !SMP && !PPC_47x)) && EXPERIMENTAL
help
kexec is a system call that implements the ability to shutdown your
current kernel, and to start another kernel. It is like a reboot
echo 'disable kernel modules' ; \
false ; \
fi
- @if ! /bin/echo dssall | $(AS) -many -o $(TOUT) >/dev/null 2>&1 ; then \
- echo -n '*** ${VERSION}.${PATCHLEVEL} kernels no longer build ' ; \
- echo 'correctly with old versions of binutils.' ; \
- echo '*** Please upgrade your binutils to 2.12.1 or newer' ; \
- false ; \
- fi
CLEAN_FILES += $(TOUT)
--- /dev/null
+/*
+ * charon board Device Tree Source
+ *
+ * Copyright (C) 2007 Semihalf
+ * Marian Balakowicz <m8@semihalf.com>
+ *
+ * Copyright (C) 2010 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+ model = "anon,charon";
+ compatible = "anon,charon";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&mpc5200_pic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,5200@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <32>;
+ i-cache-line-size = <32>;
+ d-cache-size = <0x4000>; // L1, 16K
+ i-cache-size = <0x4000>; // L1, 16K
+ timebase-frequency = <0>; // from bootloader
+ bus-frequency = <0>; // from bootloader
+ clock-frequency = <0>; // from bootloader
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x08000000>; // 128MB
+ };
+
+ soc5200@f0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc5200-immr";
+ ranges = <0 0xf0000000 0x0000c000>;
+ reg = <0xf0000000 0x00000100>;
+ bus-frequency = <0>; // from bootloader
+ system-frequency = <0>; // from bootloader
+
+ cdm@200 {
+ compatible = "fsl,mpc5200-cdm";
+ reg = <0x200 0x38>;
+ };
+
+ mpc5200_pic: interrupt-controller@500 {
+ // 5200 interrupts are encoded into two levels;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ compatible = "fsl,mpc5200-pic";
+ reg = <0x500 0x80>;
+ };
+
+ timer@600 { // General Purpose Timer
+ compatible = "fsl,mpc5200-gpt";
+ reg = <0x600 0x10>;
+ interrupts = <1 9 0>;
+ fsl,has-wdt;
+ };
+
+ can@900 {
+ compatible = "fsl,mpc5200-mscan";
+ interrupts = <2 17 0>;
+ reg = <0x900 0x80>;
+ };
+
+ can@980 {
+ compatible = "fsl,mpc5200-mscan";
+ interrupts = <2 18 0>;
+ reg = <0x980 0x80>;
+ };
+
+ gpio_simple: gpio@b00 {
+ compatible = "fsl,mpc5200-gpio";
+ reg = <0xb00 0x40>;
+ interrupts = <1 7 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ usb@1000 {
+ compatible = "fsl,mpc5200-ohci","ohci-be";
+ reg = <0x1000 0xff>;
+ interrupts = <2 6 0>;
+ };
+
+ dma-controller@1200 {
+ device_type = "dma-controller";
+ compatible = "fsl,mpc5200-bestcomm";
+ reg = <0x1200 0x80>;
+ interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
+ 3 4 0 3 5 0 3 6 0 3 7 0
+ 3 8 0 3 9 0 3 10 0 3 11 0
+ 3 12 0 3 13 0 3 14 0 3 15 0>;
+ };
+
+ xlb@1f00 {
+ compatible = "fsl,mpc5200-xlb";
+ reg = <0x1f00 0x100>;
+ };
+
+ serial@2000 { // PSC1
+ compatible = "fsl,mpc5200-psc-uart";
+ reg = <0x2000 0x100>;
+ interrupts = <2 1 0>;
+ };
+
+ serial@2400 { // PSC3
+ compatible = "fsl,mpc5200-psc-uart";
+ reg = <0x2400 0x100>;
+ interrupts = <2 3 0>;
+ };
+
+ ethernet@3000 {
+ compatible = "fsl,mpc5200-fec";
+ reg = <0x3000 0x400>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <2 5 0>;
+ fixed-link = <1 1 100 0 0>;
+ };
+
+ mdio@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200-mdio";
+ reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
+ interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
+ };
+
+ ata@3a00 {
+ compatible = "fsl,mpc5200-ata";
+ reg = <0x3a00 0x100>;
+ interrupts = <2 7 0>;
+ };
+
+ i2c@3d00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200-i2c","fsl-i2c";
+ reg = <0x3d00 0x40>;
+ interrupts = <2 15 0>;
+ };
+
+
+ i2c@3d40 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200-i2c","fsl-i2c";
+ reg = <0x3d40 0x40>;
+ interrupts = <2 16 0>;
+
+ dtt@28 {
+ compatible = "national,lm80";
+ reg = <0x28>;
+ };
+
+ rtc@68 {
+ compatible = "dallas,ds1374";
+ reg = <0x68>;
+ };
+ };
+
+ sram@8000 {
+ compatible = "fsl,mpc5200-sram";
+ reg = <0x8000 0x4000>;
+ };
+ };
+
+ localbus {
+ compatible = "fsl,mpc5200-lpb","simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = < 0 0 0xfc000000 0x02000000
+ 1 0 0xe0000000 0x04000000 // CS1 range, SM501
+ 3 0 0xe8000000 0x00080000>;
+
+ flash@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 0x02000000>;
+ bank-width = <4>;
+ device-width = <2>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+ };
+
+ display@1,0 {
+ compatible = "smi,sm501";
+ reg = <1 0x00000000 0x00800000
+ 1 0x03e00000 0x00200000>;
+ mode = "640x480-32@60";
+ interrupts = <1 1 3>;
+ little-endian;
+ };
+
+ mram0@3,0 {
+ compatible = "mtd-ram";
+ reg = <3 0x00000 0x80000>;
+ bank-width = <1>;
+ };
+ };
+
+ pci@f0000d00 {
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ compatible = "fsl,mpc5200-pci";
+ reg = <0xf0000d00 0x100>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3
+ 0xc000 0 0 2 &mpc5200_pic 0 0 3
+ 0xc000 0 0 3 &mpc5200_pic 0 0 3
+ 0xc000 0 0 4 &mpc5200_pic 0 0 3>;
+ clock-frequency = <0>; // From boot loader
+ interrupts = <2 8 0 2 9 0 2 10 0>;
+ bus-range = <0 0>;
+ ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000
+ 0x02000000 0 0x90000000 0x90000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
+ };
+};
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
+CONFIG_SPARSE_IRQ=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
+CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_KALLSYMS is not set
# CONFIG_EPOLL is not set
CONFIG_PPC_MPC5200_BUGFIX=y
# CONFIG_PPC_PMAC is not set
CONFIG_PPC_BESTCOMM=y
-CONFIG_SPARSE_IRQ=y
CONFIG_PM=y
# CONFIG_PCI is not set
CONFIG_NET=y
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_ROM=y
CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_PLATRAM=y
CONFIG_PROC_DEVICETREE=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=32768
-# CONFIG_MISC_DEVICES is not set
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_SG=y
CONFIG_ATA=y
CONFIG_PATA_PLATFORM=y
CONFIG_NETDEVICES=y
CONFIG_LXT_PHY=y
+CONFIG_FIXED_PHY=y
CONFIG_NET_ETHERNET=y
CONFIG_FEC_MPC52xx=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
CONFIG_SERIAL_MPC52xx=y
CONFIG_SERIAL_MPC52xx_CONSOLE=y
CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MPC=y
+CONFIG_SENSORS_LM80=y
CONFIG_WATCHDOG=y
+CONFIG_MFD_SM501=y
+CONFIG_FB=y
+CONFIG_FB_FOREIGN_ENDIAN=y
+CONFIG_FB_SM501=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_STORAGE=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_DS1307=y
+CONFIG_RTC_DRV_DS1374=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_INOTIFY=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_PROC_KCORE=y
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_PCBC=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_LZO=m
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
+CONFIG_VIRTUALIZATION=y
+CONFIG_KVM_BOOK3S_64=m
+CONFIG_KVM_BOOK3S_64_HV=y
+CONFIG_VHOST_NET=m
CONFIG_CRYPTO_LZO=m
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
+CONFIG_VIRTUALIZATION=y
+CONFIG_KVM_BOOK3S_64=m
+CONFIG_KVM_BOOK3S_64_HV=y
+CONFIG_VHOST_NET=m
int t;
__asm__ __volatile__(
- PPC_RELEASE_BARRIER
+ PPC_ATOMIC_ENTRY_BARRIER
"1: lwarx %0,0,%2 # atomic_add_return\n\
add %0,%1,%0\n"
PPC405_ERR77(0,%2)
" stwcx. %0,0,%2 \n\
bne- 1b"
- PPC_ACQUIRE_BARRIER
+ PPC_ATOMIC_EXIT_BARRIER
: "=&r" (t)
: "r" (a), "r" (&v->counter)
: "cc", "memory");
int t;
__asm__ __volatile__(
- PPC_RELEASE_BARRIER
+ PPC_ATOMIC_ENTRY_BARRIER
"1: lwarx %0,0,%2 # atomic_sub_return\n\
subf %0,%1,%0\n"
PPC405_ERR77(0,%2)
" stwcx. %0,0,%2 \n\
bne- 1b"
- PPC_ACQUIRE_BARRIER
+ PPC_ATOMIC_EXIT_BARRIER
: "=&r" (t)
: "r" (a), "r" (&v->counter)
: "cc", "memory");
int t;
__asm__ __volatile__(
- PPC_RELEASE_BARRIER
+ PPC_ATOMIC_ENTRY_BARRIER
"1: lwarx %0,0,%1 # atomic_inc_return\n\
addic %0,%0,1\n"
PPC405_ERR77(0,%1)
" stwcx. %0,0,%1 \n\
bne- 1b"
- PPC_ACQUIRE_BARRIER
+ PPC_ATOMIC_EXIT_BARRIER
: "=&r" (t)
: "r" (&v->counter)
: "cc", "xer", "memory");
int t;
__asm__ __volatile__(
- PPC_RELEASE_BARRIER
+ PPC_ATOMIC_ENTRY_BARRIER
"1: lwarx %0,0,%1 # atomic_dec_return\n\
addic %0,%0,-1\n"
PPC405_ERR77(0,%1)
" stwcx. %0,0,%1\n\
bne- 1b"
- PPC_ACQUIRE_BARRIER
+ PPC_ATOMIC_EXIT_BARRIER
: "=&r" (t)
: "r" (&v->counter)
: "cc", "xer", "memory");
int t;
__asm__ __volatile__ (
- PPC_RELEASE_BARRIER
+ PPC_ATOMIC_ENTRY_BARRIER
"1: lwarx %0,0,%1 # __atomic_add_unless\n\
cmpw 0,%0,%3 \n\
beq- 2f \n\
PPC405_ERR77(0,%2)
" stwcx. %0,0,%1 \n\
bne- 1b \n"
- PPC_ACQUIRE_BARRIER
+ PPC_ATOMIC_EXIT_BARRIER
" subf %0,%2,%0 \n\
2:"
: "=&r" (t)
int t;
__asm__ __volatile__(
- PPC_RELEASE_BARRIER
+ PPC_ATOMIC_ENTRY_BARRIER
"1: lwarx %0,0,%1 # atomic_dec_if_positive\n\
cmpwi %0,1\n\
addi %0,%0,-1\n\
PPC405_ERR77(0,%1)
" stwcx. %0,0,%1\n\
bne- 1b"
- PPC_ACQUIRE_BARRIER
+ PPC_ATOMIC_EXIT_BARRIER
"\n\
2:" : "=&b" (t)
: "r" (&v->counter)
long t;
__asm__ __volatile__(
- PPC_RELEASE_BARRIER
+ PPC_ATOMIC_ENTRY_BARRIER
"1: ldarx %0,0,%2 # atomic64_add_return\n\
add %0,%1,%0\n\
stdcx. %0,0,%2 \n\
bne- 1b"
- PPC_ACQUIRE_BARRIER
+ PPC_ATOMIC_EXIT_BARRIER
: "=&r" (t)
: "r" (a), "r" (&v->counter)
: "cc", "memory");
long t;
__asm__ __volatile__(
- PPC_RELEASE_BARRIER
+ PPC_ATOMIC_ENTRY_BARRIER
"1: ldarx %0,0,%2 # atomic64_sub_return\n\
subf %0,%1,%0\n\
stdcx. %0,0,%2 \n\
bne- 1b"
- PPC_ACQUIRE_BARRIER
+ PPC_ATOMIC_EXIT_BARRIER
: "=&r" (t)
: "r" (a), "r" (&v->counter)
: "cc", "memory");
long t;
__asm__ __volatile__(
- PPC_RELEASE_BARRIER
+ PPC_ATOMIC_ENTRY_BARRIER
"1: ldarx %0,0,%1 # atomic64_inc_return\n\
addic %0,%0,1\n\
stdcx. %0,0,%1 \n\
bne- 1b"
- PPC_ACQUIRE_BARRIER
+ PPC_ATOMIC_EXIT_BARRIER
: "=&r" (t)
: "r" (&v->counter)
: "cc", "xer", "memory");
long t;
__asm__ __volatile__(
- PPC_RELEASE_BARRIER
+ PPC_ATOMIC_ENTRY_BARRIER
"1: ldarx %0,0,%1 # atomic64_dec_return\n\
addic %0,%0,-1\n\
stdcx. %0,0,%1\n\
bne- 1b"
- PPC_ACQUIRE_BARRIER
+ PPC_ATOMIC_EXIT_BARRIER
: "=&r" (t)
: "r" (&v->counter)
: "cc", "xer", "memory");
long t;
__asm__ __volatile__(
- PPC_RELEASE_BARRIER
+ PPC_ATOMIC_ENTRY_BARRIER
"1: ldarx %0,0,%1 # atomic64_dec_if_positive\n\
addic. %0,%0,-1\n\
blt- 2f\n\
stdcx. %0,0,%1\n\
bne- 1b"
- PPC_ACQUIRE_BARRIER
+ PPC_ATOMIC_EXIT_BARRIER
"\n\
2:" : "=&r" (t)
: "r" (&v->counter)
long t;
__asm__ __volatile__ (
- PPC_RELEASE_BARRIER
+ PPC_ATOMIC_ENTRY_BARRIER
"1: ldarx %0,0,%1 # __atomic_add_unless\n\
cmpd 0,%0,%3 \n\
beq- 2f \n\
add %0,%2,%0 \n"
" stdcx. %0,0,%1 \n\
bne- 1b \n"
- PPC_ACQUIRE_BARRIER
+ PPC_ATOMIC_EXIT_BARRIER
" subf %0,%2,%0 \n\
2:"
: "=&r" (t)
return (old & mask); \
}
-DEFINE_TESTOP(test_and_set_bits, or, PPC_RELEASE_BARRIER,
- PPC_ACQUIRE_BARRIER, 0)
+DEFINE_TESTOP(test_and_set_bits, or, PPC_ATOMIC_ENTRY_BARRIER,
+ PPC_ATOMIC_EXIT_BARRIER, 0)
DEFINE_TESTOP(test_and_set_bits_lock, or, "",
PPC_ACQUIRE_BARRIER, 1)
-DEFINE_TESTOP(test_and_clear_bits, andc, PPC_RELEASE_BARRIER,
- PPC_ACQUIRE_BARRIER, 0)
-DEFINE_TESTOP(test_and_change_bits, xor, PPC_RELEASE_BARRIER,
- PPC_ACQUIRE_BARRIER, 0)
+DEFINE_TESTOP(test_and_clear_bits, andc, PPC_ATOMIC_ENTRY_BARRIER,
+ PPC_ATOMIC_EXIT_BARRIER, 0)
+DEFINE_TESTOP(test_and_change_bits, xor, PPC_ATOMIC_ENTRY_BARRIER,
+ PPC_ATOMIC_EXIT_BARRIER, 0)
static __inline__ int test_and_set_bit(unsigned long nr,
volatile unsigned long *addr)
{
if (can_use_virtual_dma)
return request_irq(FLOPPY_IRQ, floppy_hardint,
- IRQF_DISABLED, "floppy", NULL);
+ 0, "floppy", NULL);
else
return request_irq(FLOPPY_IRQ, floppy_interrupt,
- IRQF_DISABLED, "floppy", NULL);
+ 0, "floppy", NULL);
}
static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io)
#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \
__asm__ __volatile ( \
- PPC_RELEASE_BARRIER \
+ PPC_ATOMIC_ENTRY_BARRIER \
"1: lwarx %0,0,%2\n" \
insn \
PPC405_ERR77(0, %2) \
"2: stwcx. %1,0,%2\n" \
"bne- 1b\n" \
+ PPC_ATOMIC_EXIT_BARRIER \
"li %1,0\n" \
"3: .section .fixup,\"ax\"\n" \
"4: li %1,%3\n" \
return -EFAULT;
__asm__ __volatile__ (
- PPC_RELEASE_BARRIER
+ PPC_ATOMIC_ENTRY_BARRIER
"1: lwarx %1,0,%3 # futex_atomic_cmpxchg_inatomic\n\
cmpw 0,%1,%4\n\
bne- 3f\n"
PPC405_ERR77(0,%3)
"2: stwcx. %5,0,%3\n\
bne- 1b\n"
- PPC_ACQUIRE_BARRIER
+ PPC_ATOMIC_EXIT_BARRIER
"3: .section .fixup,\"ax\"\n\
4: li %0,%6\n\
b 3b\n\
#define KVM_SREGS_E_UPDATE_DEC (1 << 2)
#define KVM_SREGS_E_UPDATE_DBSR (1 << 3)
-/*
- * Book3S special bits to indicate contents in the struct by maintaining
- * backwards compatibility with older structs. If adding a new field,
- * please make sure to add a flag for that new field */
-#define KVM_SREGS_S_HIOR (1 << 0)
-
/*
* In KVM_SET_SREGS, reserved/pad fields must be left untouched from a
* previous KVM_GET_REGS.
__u64 ibat[8];
__u64 dbat[8];
} ppc32;
- __u64 flags; /* KVM_SREGS_S_ */
- __u64 hior;
} s;
struct {
union {
#endif
int context_id[SID_CONTEXTS];
- bool hior_sregs; /* HIOR is set by SREGS, not PVR */
-
struct hlist_head hpte_hash_pte[HPTEG_HASH_NUM_PTE];
struct hlist_head hpte_hash_pte_long[HPTEG_HASH_NUM_PTE_LONG];
struct hlist_head hpte_hash_vpte[HPTEG_HASH_NUM_VPTE];
LV1_CALL(gpu_context_iomap, 5, 0, 221 )
LV1_CALL(gpu_context_attribute, 6, 0, 225 )
LV1_CALL(gpu_context_intr, 1, 1, 227 )
-LV1_CALL(gpu_attribute, 5, 0, 228 )
+LV1_CALL(gpu_attribute, 3, 0, 228 )
LV1_CALL(get_rtc, 0, 2, 232 )
LV1_CALL(set_ppe_periodic_tracer_frequency, 1, 0, 240 )
LV1_CALL(start_ppe_periodic_tracer, 5, 0, 241 )
#define MSR_ MSR_ME | MSR_CE
#define MSR_KERNEL MSR_ | MSR_64BIT
-#define MSR_USER32 MSR_ | MSR_PR | MSR_EE | MSR_DE
+#define MSR_USER32 MSR_ | MSR_PR | MSR_EE
#define MSR_USER64 MSR_USER32 | MSR_64BIT
#elif defined (CONFIG_40x)
#define MSR_KERNEL (MSR_ME|MSR_RI|MSR_IR|MSR_DR|MSR_CE)
#ifdef __powerpc64__
-extern char _end[];
+extern char __end_interrupts[];
static inline int in_kernel_text(unsigned long addr)
{
extern unsigned int __start___lwsync_fixup, __stop___lwsync_fixup;
extern void do_lwsync_fixups(unsigned long value, void *fixup_start,
void *fixup_end);
+extern void do_final_fixups(void);
static inline void eieio(void)
{
START_LWSYNC_SECTION(97); \
isync; \
MAKE_LWSYNC_SECTION_ENTRY(97, __lwsync_fixup);
-#define PPC_ACQUIRE_BARRIER "\n" stringify_in_c(__PPC_ACQUIRE_BARRIER)
-#define PPC_RELEASE_BARRIER stringify_in_c(LWSYNC) "\n"
+#define PPC_ACQUIRE_BARRIER "\n" stringify_in_c(__PPC_ACQUIRE_BARRIER)
+#define PPC_RELEASE_BARRIER stringify_in_c(LWSYNC) "\n"
+#define PPC_ATOMIC_ENTRY_BARRIER "\n" stringify_in_c(LWSYNC) "\n"
+#define PPC_ATOMIC_EXIT_BARRIER "\n" stringify_in_c(sync) "\n"
#else
#define PPC_ACQUIRE_BARRIER
#define PPC_RELEASE_BARRIER
+#define PPC_ATOMIC_ENTRY_BARRIER
+#define PPC_ATOMIC_EXIT_BARRIER
#endif
#endif /* __KERNEL__ */
#define DEFAULT_PRIORITY 5
/*
- * Mark IPIs as higher priority so we can take them inside interrupts that
- * arent marked IRQF_DISABLED
+ * Mark IPIs as higher priority so we can take them inside interrupts
+ * FIXME: still true now?
*/
#define IPI_PRIORITY 4
stw r9,8(r1)
stw r11,12(r1)
stw r3,ORIG_GPR3(r1)
+ /*
+ * The trace_hardirqs_off will use CALLER_ADDR0 and CALLER_ADDR1.
+ * If from user mode there is only one stack frame on the stack, and
+ * accessing CALLER_ADDR1 will cause oops. So we need create a dummy
+ * stack frame to make trace_hardirqs_off happy.
+ */
+ andi. r12,r12,MSR_PR
+ beq 11f
+ stwu r1,-16(r1)
+ bl trace_hardirqs_off
+ addi r1,r1,16
+ b 12f
+
+11:
bl trace_hardirqs_off
+12:
lwz r0,GPR0(r1)
lwz r3,ORIG_GPR3(r1)
lwz r4,GPR4(r1)
#ifdef CONFIG_CBE_RAS
STD_EXCEPTION_HV(0x1200, 0x1202, cbe_system_error)
- KVM_HANDLER_PR_SKIP(PACA_EXGEN, EXC_HV, 0x1202)
+ KVM_HANDLER_SKIP(PACA_EXGEN, EXC_HV, 0x1202)
#endif /* CONFIG_CBE_RAS */
STD_EXCEPTION_PSERIES(0x1300, 0x1300, instruction_breakpoint)
#ifdef CONFIG_CBE_RAS
STD_EXCEPTION_HV(0x1600, 0x1602, cbe_maintenance)
- KVM_HANDLER_PR_SKIP(PACA_EXGEN, EXC_HV, 0x1602)
+ KVM_HANDLER_SKIP(PACA_EXGEN, EXC_HV, 0x1602)
#endif /* CONFIG_CBE_RAS */
STD_EXCEPTION_PSERIES(0x1700, 0x1700, altivec_assist)
#ifdef CONFIG_CBE_RAS
STD_EXCEPTION_HV(0x1800, 0x1802, cbe_thermal)
- KVM_HANDLER_PR_SKIP(PACA_EXGEN, EXC_HV, 0x1802)
+ KVM_HANDLER_SKIP(PACA_EXGEN, EXC_HV, 0x1802)
#endif /* CONFIG_CBE_RAS */
. = 0x3000
#include <linux/jump_label.h>
#include <asm/code-patching.h>
+#ifdef HAVE_JUMP_LABEL
void arch_jump_label_transform(struct jump_entry *entry,
enum jump_label_type type)
{
else
patch_instruction(addr, PPC_INST_NOP);
}
+#endif
/* On relocatable kernels interrupts handlers and our code
can be in different regions, so we don't patch them */
- extern u32 __end_interrupts;
if ((ulong)inst < (ulong)&__end_interrupts)
return;
#endif
mr r5, r31
li r0, 0
-#elif defined(CONFIG_44x) && !defined(CONFIG_47x)
+#elif defined(CONFIG_44x) && !defined(CONFIG_PPC_47x)
/*
* Code for setting up 1:1 mapping for PPC440x for KEXEC
new_thread = &new->thread;
old_thread = ¤t->thread;
-#if defined(CONFIG_PPC_BOOK3E_64)
- /* XXX Current Book3E code doesn't deal with kernel side DBCR0,
- * we always hold the user values, so we set it now.
- *
- * However, we ensure the kernel MSR:DE is appropriately cleared too
- * to avoid spurrious single step exceptions in the kernel.
- *
- * This will have to change to merge with the ppc32 code at some point,
- * but I don't like much what ppc32 is doing today so there's some
- * thinking needed there
- */
- if ((new_thread->dbcr0 | old_thread->dbcr0) & DBCR0_IDM) {
- u32 dbcr0;
-
- mtmsr(mfmsr() & ~MSR_DE);
- isync();
- dbcr0 = mfspr(SPRN_DBCR0);
- dbcr0 = (dbcr0 & DBCR0_EDM) | new_thread->dbcr0;
- mtspr(SPRN_DBCR0, dbcr0);
- }
-#endif /* CONFIG_PPC64_BOOK3E */
-
#ifdef CONFIG_PPC64
/*
* Collect processor utilization data per process
if ((regs->trap != 0xc00) && cpu_has_feature(CPU_FTR_CFAR))
printk("CFAR: "REG"\n", regs->orig_gpr3);
if (trap == 0x300 || trap == 0x600)
-#ifdef CONFIG_PPC_ADV_DEBUG_REGS
+#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
printk("DEAR: "REG", ESR: "REG"\n", regs->dar, regs->dsisr);
#else
printk("DAR: "REG", DSISR: %08lx\n", regs->dar, regs->dsisr);
return;
base = alloc_down(size, PAGE_SIZE, 0);
- if (base == 0) {
- prom_printf("RTAS allocation failed !\n");
- return;
- }
+ if (base == 0)
+ prom_panic("Could not allocate memory for RTAS\n");
rtas_inst = call_prom("open", 1, 1, ADDR("/rtas"));
if (!IHANDLE_VALID(rtas_inst)) {
PTRRELOC(&__start___lwsync_fixup),
PTRRELOC(&__stop___lwsync_fixup));
+ do_final_fixups();
+
return KERNELBASE + offset;
}
&__start___fw_ftr_fixup, &__stop___fw_ftr_fixup);
do_lwsync_fixups(cur_cpu_spec->cpu_features,
&__start___lwsync_fixup, &__stop___lwsync_fixup);
+ do_final_fixups();
/*
* Unflatten the device-tree passed by prom_init or kexec
compat_sigset_t cset;
switch (_NSIG_WORDS) {
- case 4: cset.sig[5] = set->sig[3] & 0xffffffffull;
+ case 4: cset.sig[6] = set->sig[3] & 0xffffffffull;
cset.sig[7] = set->sig[3] >> 32;
case 3: cset.sig[4] = set->sig[2] & 0xffffffffull;
cset.sig[5] = set->sig[2] >> 32;
return 1;
}
#endif
- err = request_irq(virq, smp_ipi_action[msg], IRQF_DISABLED|IRQF_PERCPU,
+ err = request_irq(virq, smp_ipi_action[msg], IRQF_PERCPU,
smp_ipi_name[msg], 0);
WARN(err < 0, "unable to request_irq %d for %s (rc %d)\n",
virq, smp_ipi_name[msg], err);
if (user_mode(regs)) {
current->thread.dbcr0 &= ~DBCR0_IC;
-#ifdef CONFIG_PPC_ADV_DEBUG_REGS
if (DBCR_ACTIVE_EVENTS(current->thread.dbcr0,
current->thread.dbcr1))
regs->msr |= MSR_DE;
else
/* Make sure the IDM bit is off */
current->thread.dbcr0 &= ~DBCR0_IDM;
-#endif
}
_exception(SIGTRAP, regs, TRAP_TRACE, regs->nip);
#include <asm/processor.h>
#include <asm/cputhreads.h>
#include <asm/page.h>
+#include <asm/hvcall.h>
#include <linux/gfp.h>
#include <linux/sched.h>
#include <linux/vmalloc.h>
addi r6,r5,VCORE_NAPPING_THREADS
31: lwarx r4,0,r6
or r4,r4,r0
- popcntw r7,r4
+ PPC_POPCNTW(r7,r4)
cmpw r7,r8
bge 2f
stwcx. r4,0,r6
#ifdef CONFIG_PPC_BOOK3S_64
if ((pvr >= 0x330000) && (pvr < 0x70330000)) {
kvmppc_mmu_book3s_64_init(vcpu);
- if (!to_book3s(vcpu)->hior_sregs)
- to_book3s(vcpu)->hior = 0xfff00000;
+ to_book3s(vcpu)->hior = 0xfff00000;
to_book3s(vcpu)->msr_mask = 0xffffffffffffffffULL;
vcpu->arch.cpu_type = KVM_CPU_3S_64;
} else
#endif
{
kvmppc_mmu_book3s_32_init(vcpu);
- if (!to_book3s(vcpu)->hior_sregs)
- to_book3s(vcpu)->hior = 0;
+ to_book3s(vcpu)->hior = 0;
to_book3s(vcpu)->msr_mask = 0xffffffffULL;
vcpu->arch.cpu_type = KVM_CPU_3S_32;
}
}
}
- if (sregs->u.s.flags & KVM_SREGS_S_HIOR)
- sregs->u.s.hior = to_book3s(vcpu)->hior;
-
return 0;
}
/* Flush the MMU after messing with the segments */
kvmppc_mmu_pte_flush(vcpu, 0, 0);
- if (sregs->u.s.flags & KVM_SREGS_S_HIOR) {
- to_book3s(vcpu)->hior_sregs = true;
- to_book3s(vcpu)->hior = sregs->u.s.hior;
- }
-
return 0;
}
case KVM_CAP_PPC_BOOKE_SREGS:
#else
case KVM_CAP_PPC_SEGSTATE:
- case KVM_CAP_PPC_HIOR:
case KVM_CAP_PPC_PAPR:
#endif
case KVM_CAP_PPC_UNSET_IRQ:
#include <linux/init.h>
#include <asm/cputable.h>
#include <asm/code-patching.h>
+#include <asm/page.h>
+#include <asm/sections.h>
struct fixup_entry {
}
}
+void do_final_fixups(void)
+{
+#if defined(CONFIG_PPC64) && defined(CONFIG_RELOCATABLE)
+ int *src, *dest;
+ unsigned long length;
+
+ if (PHYSICAL_START == 0)
+ return;
+
+ src = (int *)(KERNELBASE + PHYSICAL_START);
+ dest = (int *)KERNELBASE;
+ length = (__end_interrupts - _stext) / sizeof(int);
+
+ while (length--) {
+ patch_instruction(dest, *src);
+ src++;
+ dest++;
+ }
+#endif
+}
+
#ifdef CONFIG_FTR_FIXUP_SELFTEST
#define check(x) \
#include <linux/suspend.h>
#include <linux/memblock.h>
#include <linux/hugetlb.h>
+#include <linux/slab.h>
#include <asm/pgalloc.h>
#include <asm/prom.h>
book3e_hugetlb_preload(vma->vm_mm, address, *ptep);
#endif
}
+
+/*
+ * System memory should not be in /proc/iomem but various tools expect it
+ * (eg kdump).
+ */
+static int add_system_ram_resources(void)
+{
+ struct memblock_region *reg;
+
+ for_each_memblock(memory, reg) {
+ struct resource *res;
+ unsigned long base = reg->base;
+ unsigned long size = reg->size;
+
+ res = kzalloc(sizeof(struct resource), GFP_KERNEL);
+ WARN_ON(!res);
+
+ if (res) {
+ res->name = "System RAM";
+ res->start = base;
+ res->end = base + size - 1;
+ res->flags = IORESOURCE_MEM;
+ WARN_ON(request_resource(&iomem_resource, res) < 0);
+ }
+ }
+
+ return 0;
+}
+subsys_initcall(add_system_ram_resources);
struct device_node *root;
const char *vec5;
- root = of_find_node_by_path("/rtas");
+ if (firmware_has_feature(FW_FEATURE_OPAL))
+ root = of_find_node_by_path("/ibm,opal");
+ else
+ root = of_find_node_by_path("/rtas");
if (!root)
root = of_find_node_by_path("/");
#define VEC5_AFFINITY_BYTE 5
#define VEC5_AFFINITY 0x80
- chosen = of_find_node_by_path("/chosen");
- if (chosen) {
- vec5 = of_get_property(chosen, "ibm,architecture-vec-5", NULL);
- if (vec5 && (vec5[VEC5_AFFINITY_BYTE] & VEC5_AFFINITY)) {
- dbg("Using form 1 affinity\n");
- form1_affinity = 1;
+
+ if (firmware_has_feature(FW_FEATURE_OPAL))
+ form1_affinity = 1;
+ else {
+ chosen = of_find_node_by_path("/chosen");
+ if (chosen) {
+ vec5 = of_get_property(chosen,
+ "ibm,architecture-vec-5", NULL);
+ if (vec5 && (vec5[VEC5_AFFINITY_BYTE] &
+ VEC5_AFFINITY)) {
+ dbg("Using form 1 affinity\n");
+ form1_affinity = 1;
+ }
}
}
/* list of the supported boards */
static const char *board[] __initdata = {
+ "anon,charon",
"intercontrol,digsy-mtc",
"manroland,mucmc52",
"manroland,uc101",
config MCU_MPC8349EMITX
bool "MPC8349E-mITX MCU driver"
- depends on I2C && PPC_83xx
+ depends on I2C=y && PPC_83xx
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
help
}
ev->virq = virq;
- rc = request_irq(virq, ev->handler, IRQF_DISABLED,
+ rc = request_irq(virq, ev->handler, 0,
ev->typecode, NULL);
if (rc != 0) {
printk(KERN_ERR "Beat: failed to request virtual IRQ"
virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
oirq.size);
if (request_irq(virq, pciex_handle_internal_irq,
- IRQF_DISABLED, "pciex", (void *)phb)) {
+ 0, "pciex", (void *)phb)) {
pr_err("PCIEXC:Failed to request irq\n");
goto error;
}
IIC_IRQ_IOEX_ATI | (iommu->nid << IIC_IRQ_NODE_SHIFT));
BUG_ON(virq == NO_IRQ);
- ret = request_irq(virq, ioc_interrupt, IRQF_DISABLED,
- iommu->name, iommu);
+ ret = request_irq(virq, ioc_interrupt, 0, iommu->name, iommu);
BUG_ON(ret);
/* set the IOC segment table origin register (and turn on the iommu) */
}
rc = request_irq(irq, cbe_pm_irq,
- IRQF_DISABLED, "cbe-pmu-0", NULL);
+ 0, "cbe-pmu-0", NULL);
if (rc) {
printk("ERROR: Request for irq on node %d failed\n",
node);
snprintf(spu->irq_c0, sizeof (spu->irq_c0), "spe%02d.0",
spu->number);
ret = request_irq(spu->irqs[0], spu_irq_class_0,
- IRQF_DISABLED,
- spu->irq_c0, spu);
+ 0, spu->irq_c0, spu);
if (ret)
goto bail0;
}
snprintf(spu->irq_c1, sizeof (spu->irq_c1), "spe%02d.1",
spu->number);
ret = request_irq(spu->irqs[1], spu_irq_class_1,
- IRQF_DISABLED,
- spu->irq_c1, spu);
+ 0, spu->irq_c1, spu);
if (ret)
goto bail1;
}
snprintf(spu->irq_c2, sizeof (spu->irq_c2), "spe%02d.2",
spu->number);
ret = request_irq(spu->irqs[2], spu_irq_class_2,
- IRQF_DISABLED,
- spu->irq_c2, spu);
+ 0, spu->irq_c2, spu);
if (ret)
goto bail2;
}
static struct irqaction gatwick_cascade_action = {
.handler = gatwick_action,
- .flags = IRQF_DISABLED,
.name = "cascade",
};
if (psurge_secondary_virq)
rc = request_irq(psurge_secondary_virq, psurge_ipi_intr,
- IRQF_DISABLED|IRQF_PERCPU, "IPI", NULL);
+ IRQF_PERCPU, "IPI", NULL);
if (rc)
pr_err("Failed to setup secondary cpu IPI\n");
static struct irqaction psurge_irqaction = {
.handler = psurge_ipi_intr,
- .flags = IRQF_DISABLED|IRQF_PERCPU,
+ .flags = IRQF_PERCPU,
.name = "primary IPI",
};
spin_lock_init(&dev.lock);
- res = request_irq(irq, ps3_notification_interrupt, IRQF_DISABLED,
+ res = request_irq(irq, ps3_notification_interrupt, 0,
"ps3_notification", &dev);
if (res) {
pr_err("%s:%u: request_irq failed %d\n", __func__, __LINE__,
struct ps3_bmp bmp __attribute__ ((aligned (PS3_BMP_MINALIGN)));
u64 ppe_id;
u64 thread_id;
+ unsigned long ipi_mask;
};
static DEFINE_PER_CPU(struct ps3_private, ps3_private);
static void ps3_chip_eoi(struct irq_data *d)
{
const struct ps3_private *pd = irq_data_get_irq_chip_data(d);
- lv1_end_of_interrupt_ext(pd->ppe_id, pd->thread_id, d->irq);
+
+ /* non-IPIs are EOIed here. */
+
+ if (!test_bit(63 - d->irq, &pd->ipi_mask))
+ lv1_end_of_interrupt_ext(pd->ppe_id, pd->thread_id, d->irq);
}
/**
cpu, virq, pd->bmp.ipi_debug_brk_mask);
}
+void __init ps3_register_ipi_irq(unsigned int cpu, unsigned int virq)
+{
+ struct ps3_private *pd = &per_cpu(ps3_private, cpu);
+
+ set_bit(63 - virq, &pd->ipi_mask);
+
+ DBG("%s:%d: cpu %u, virq %u, ipi_mask %lxh\n", __func__, __LINE__,
+ cpu, virq, pd->ipi_mask);
+}
+
static unsigned int ps3_get_irq(void)
{
struct ps3_private *pd = &__get_cpu_var(ps3_private);
BUG();
}
#endif
+
+ /* IPIs are EOIed here. */
+
+ if (test_bit(63 - plug, &pd->ipi_mask))
+ lv1_end_of_interrupt_ext(pd->ppe_id, pd->thread_id, plug);
+
return plug;
}
void ps3_init_IRQ(void);
void ps3_shutdown_IRQ(int cpu);
void __init ps3_register_ipi_debug_brk(unsigned int cpu, unsigned int virq);
+void __init ps3_register_ipi_irq(unsigned int cpu, unsigned int virq);
/* smp */
enum ps3_bus_type *bus_type)
{
int result;
- u64 v1;
+ u64 v1 = 0;
result = read_node(PS3_LPAR_ID_PME,
make_first_field("bus", bus_index),
unsigned int *num_dev)
{
int result;
- u64 v1;
+ u64 v1 = 0;
result = read_node(PS3_LPAR_ID_PME,
make_first_field("bus", bus_index),
unsigned int dev_index, enum ps3_dev_type *dev_type)
{
int result;
- u64 v1;
+ u64 v1 = 0;
result = read_node(PS3_LPAR_ID_PME,
make_first_field("bus", bus_index),
enum ps3_interrupt_type *intr_type, unsigned int *interrupt_id)
{
int result;
- u64 v1;
- u64 v2;
+ u64 v1 = 0;
+ u64 v2 = 0;
result = read_node(PS3_LPAR_ID_PME,
make_first_field("bus", bus_index),
enum ps3_reg_type *reg_type)
{
int result;
- u64 v1;
+ u64 v1 = 0;
result = read_node(PS3_LPAR_ID_PME,
make_first_field("bus", bus_index),
unsigned int dev_index, unsigned int *num_regions)
{
int result;
- u64 v1;
+ u64 v1 = 0;
result = read_node(PS3_LPAR_ID_PME,
make_first_field("bus", bus_index),
unsigned int *region_id)
{
int result;
- u64 v1;
+ u64 v1 = 0;
result = read_node(PS3_LPAR_ID_PME,
make_first_field("bus", bus_index),
int ps3_repository_read_num_spu_reserved(unsigned int *num_spu_reserved)
{
int result;
- u64 v1;
+ u64 v1 = 0;
result = read_node(PS3_LPAR_ID_CURRENT,
make_first_field("bi", 0),
int ps3_repository_read_num_spu_resource_id(unsigned int *num_resource_id)
{
int result;
- u64 v1;
+ u64 v1 = 0;
result = read_node(PS3_LPAR_ID_CURRENT,
make_first_field("bi", 0),
enum ps3_spu_resource_type *resource_type, unsigned int *resource_id)
{
int result;
- u64 v1;
- u64 v2;
+ u64 v1 = 0;
+ u64 v2 = 0;
result = read_node(PS3_LPAR_ID_CURRENT,
make_first_field("bi", 0),
int ps3_repository_read_boot_dat_size(unsigned int *size)
{
int result;
- u64 v1;
+ u64 v1 = 0;
result = read_node(PS3_LPAR_ID_CURRENT,
make_first_field("bi", 0),
int ps3_repository_read_vuart_av_port(unsigned int *port)
{
int result;
- u64 v1;
+ u64 v1 = 0;
result = read_node(PS3_LPAR_ID_CURRENT,
make_first_field("bi", 0),
int ps3_repository_read_vuart_sysmgr_port(unsigned int *port)
{
int result;
- u64 v1;
+ u64 v1 = 0;
result = read_node(PS3_LPAR_ID_CURRENT,
make_first_field("bi", 0),
int ps3_repository_read_num_be(unsigned int *num_be)
{
int result;
- u64 v1;
+ u64 v1 = 0;
result = read_node(PS3_LPAR_ID_PME,
make_first_field("ben", 0),
static int ps3_smp_probe(void)
{
- return 2;
-}
+ int cpu;
-static void __init ps3_smp_setup_cpu(int cpu)
-{
- int result;
- unsigned int *virqs = per_cpu(ps3_ipi_virqs, cpu);
- int i;
+ for (cpu = 0; cpu < 2; cpu++) {
+ int result;
+ unsigned int *virqs = per_cpu(ps3_ipi_virqs, cpu);
+ int i;
- DBG(" -> %s:%d: (%d)\n", __func__, __LINE__, cpu);
+ DBG(" -> %s:%d: (%d)\n", __func__, __LINE__, cpu);
- /*
- * Check assumptions on ps3_ipi_virqs[] indexing. If this
- * check fails, then a different mapping of PPC_MSG_
- * to index needs to be setup.
- */
+ /*
+ * Check assumptions on ps3_ipi_virqs[] indexing. If this
+ * check fails, then a different mapping of PPC_MSG_
+ * to index needs to be setup.
+ */
- BUILD_BUG_ON(PPC_MSG_CALL_FUNCTION != 0);
- BUILD_BUG_ON(PPC_MSG_RESCHEDULE != 1);
- BUILD_BUG_ON(PPC_MSG_CALL_FUNC_SINGLE != 2);
- BUILD_BUG_ON(PPC_MSG_DEBUGGER_BREAK != 3);
+ BUILD_BUG_ON(PPC_MSG_CALL_FUNCTION != 0);
+ BUILD_BUG_ON(PPC_MSG_RESCHEDULE != 1);
+ BUILD_BUG_ON(PPC_MSG_CALL_FUNC_SINGLE != 2);
+ BUILD_BUG_ON(PPC_MSG_DEBUGGER_BREAK != 3);
- for (i = 0; i < MSG_COUNT; i++) {
- result = ps3_event_receive_port_setup(cpu, &virqs[i]);
+ for (i = 0; i < MSG_COUNT; i++) {
+ result = ps3_event_receive_port_setup(cpu, &virqs[i]);
- if (result)
- continue;
+ if (result)
+ continue;
- DBG("%s:%d: (%d, %d) => virq %u\n",
- __func__, __LINE__, cpu, i, virqs[i]);
+ DBG("%s:%d: (%d, %d) => virq %u\n",
+ __func__, __LINE__, cpu, i, virqs[i]);
- result = smp_request_message_ipi(virqs[i], i);
+ result = smp_request_message_ipi(virqs[i], i);
- if (result)
- virqs[i] = NO_IRQ;
- }
+ if (result)
+ virqs[i] = NO_IRQ;
+ else
+ ps3_register_ipi_irq(cpu, virqs[i]);
+ }
- ps3_register_ipi_debug_brk(cpu, virqs[PPC_MSG_DEBUGGER_BREAK]);
+ ps3_register_ipi_debug_brk(cpu, virqs[PPC_MSG_DEBUGGER_BREAK]);
- DBG(" <- %s:%d: (%d)\n", __func__, __LINE__, cpu);
+ DBG(" <- %s:%d: (%d)\n", __func__, __LINE__, cpu);
+ }
+
+ return 2;
}
void ps3_smp_cleanup_cpu(int cpu)
.probe = ps3_smp_probe,
.message_pass = ps3_smp_message_pass,
.kick_cpu = smp_generic_kick_cpu,
- .setup_cpu = ps3_smp_setup_cpu,
};
void smp_init_ps3(void)
*/
#include <linux/init.h>
-#include <linux/export.h>
+#include <linux/module.h>
#include <linux/types.h>
#include <linux/dma-mapping.h>
#include <linux/interrupt.h>
* IPIs are marked IRQ_PER_CPU. This has the side effect of
* preventing the IRQ_PENDING/IRQ_INPROGRESS logic from
* applying to them. We EOI them late to avoid re-entering.
- * We mark IPI's with IRQF_DISABLED as they must run with
- * irqs disabled.
*/
mpic_eoi(mpic);
}
}
/* Install error handler */
- if (request_irq(irq, l2c_error_handler, IRQF_DISABLED, "L2C", 0) < 0) {
+ if (request_irq(irq, l2c_error_handler, 0, "L2C", 0) < 0) {
printk(KERN_ERR "Cannot install L2C error handler"
", cache is not enabled\n");
of_node_put(np);
BUG_ON(ipi == NO_IRQ);
/*
- * IPIs are marked IRQF_DISABLED as they must run with irqs
- * disabled, and PERCPU. The handler was set in map.
+ * IPIs are marked IRQF_PERCPU. The handler was set in map.
*/
BUG_ON(request_irq(ipi, icp_ops->ipi_action,
- IRQF_DISABLED|IRQF_PERCPU, "IPI", NULL));
+ IRQF_PERCPU, "IPI", NULL));
}
int __init xics_smp_probe(void)
config CRASH_DUMP
bool "kernel crash dumps"
depends on 64BIT
+ select KEXEC
help
Generate crash dump after being started by kexec.
Crash dump kernels are loaded in the main kernel with kexec-tools
if (facility_mask & CRYPT_S390_MSA && !test_facility(17))
return 0;
- if (facility_mask & CRYPT_S390_MSA3 && !test_facility(76))
+
+ if (facility_mask & CRYPT_S390_MSA3 &&
+ (!test_facility(2) || !test_facility(76)))
return 0;
- if (facility_mask & CRYPT_S390_MSA4 && !test_facility(77))
+ if (facility_mask & CRYPT_S390_MSA4 &&
+ (!test_facility(2) || !test_facility(77)))
return 0;
switch (func & CRYPT_S390_OP_MASK) {
#define KVM_HPAGE_MASK(x) (~(KVM_HPAGE_SIZE(x) - 1))
#define KVM_PAGES_PER_HPAGE(x) (KVM_HPAGE_SIZE(x) / PAGE_SIZE)
-#define CPUSTAT_HOST 0x80000000
+#define CPUSTAT_STOPPED 0x80000000
#define CPUSTAT_WAIT 0x10000000
#define CPUSTAT_ECALL_PEND 0x08000000
#define CPUSTAT_STOP_INT 0x04000000
u32 instruction_stfl;
u32 instruction_tprot;
u32 instruction_sigp_sense;
+ u32 instruction_sigp_sense_running;
u32 instruction_sigp_external_call;
u32 instruction_sigp_emergency;
u32 instruction_sigp_stop;
unsigned long address, bits;
unsigned char skey;
+ if (!pte_present(*ptep))
+ return pgste;
address = pte_val(*ptep) & PAGE_MASK;
skey = page_get_storage_key(address);
bits = skey & (_PAGE_CHANGED | _PAGE_REFERENCED);
#ifdef CONFIG_PGSTE
int young;
+ if (!pte_present(*ptep))
+ return pgste;
young = page_reset_referenced(pte_val(*ptep) & PAGE_MASK);
/* Transfer page referenced bit to pte software bit (host view) */
if (young || (pgste_val(pgste) & RCP_HR_BIT))
}
-static inline void pgste_set_pte(pte_t *ptep, pgste_t pgste)
+static inline void pgste_set_pte(pte_t *ptep, pgste_t pgste, pte_t entry)
{
#ifdef CONFIG_PGSTE
unsigned long address;
unsigned long okey, nkey;
- address = pte_val(*ptep) & PAGE_MASK;
+ if (!pte_present(entry))
+ return;
+ address = pte_val(entry) & PAGE_MASK;
okey = nkey = page_get_storage_key(address);
nkey &= ~(_PAGE_ACC_BITS | _PAGE_FP_BIT);
/* Set page access key and fetch protection bit from pgste */
if (mm_has_pgste(mm)) {
pgste = pgste_get_lock(ptep);
- pgste_set_pte(ptep, pgste);
+ pgste_set_pte(ptep, pgste, entry);
*ptep = entry;
pgste_set_unlock(ptep, pgste);
} else
#define MACHINE_FLAG_LPAR (1UL << 12)
#define MACHINE_FLAG_SPP (1UL << 13)
#define MACHINE_FLAG_TOPOLOGY (1UL << 14)
+#define MACHINE_FLAG_STCKF (1UL << 15)
#define MACHINE_IS_VM (S390_lowcore.machine_flags & MACHINE_FLAG_VM)
#define MACHINE_IS_KVM (S390_lowcore.machine_flags & MACHINE_FLAG_KVM)
#define MACHINE_HAS_PFMF (0)
#define MACHINE_HAS_SPP (0)
#define MACHINE_HAS_TOPOLOGY (0)
+#define MACHINE_HAS_STCKF (0)
#else /* __s390x__ */
#define MACHINE_HAS_IEEE (1)
#define MACHINE_HAS_CSP (1)
#define MACHINE_HAS_PFMF (S390_lowcore.machine_flags & MACHINE_FLAG_PFMF)
#define MACHINE_HAS_SPP (S390_lowcore.machine_flags & MACHINE_FLAG_SPP)
#define MACHINE_HAS_TOPOLOGY (S390_lowcore.machine_flags & MACHINE_FLAG_TOPOLOGY)
+#define MACHINE_HAS_STCKF (S390_lowcore.machine_flags & MACHINE_FLAG_STCKF)
#endif /* __s390x__ */
#define ZFCPDUMP_HSA_SIZE (32UL<<20)
{
unsigned long long clk;
- if (test_facility(25))
+ if (MACHINE_HAS_STCKF)
asm volatile(".insn s,0xb27c0000,%0" : "=Q" (clk) : : "cc");
else
clk = get_clock();
#define __NR_clock_adjtime 337
#define __NR_syncfs 338
#define __NR_setns 339
-#define NR_syscalls 340
+#define __NR_process_vm_readv 340
+#define __NR_process_vm_writev 341
+#define NR_syscalls 342
/*
* There are some system calls that are not present on 64 bit, some
lgfr %r2,%r2 # int
lgfr %r3,%r3 # int
jg sys_setns
+
+ENTRY(compat_sys_process_vm_readv_wrapper)
+ lgfr %r2,%r2 # compat_pid_t
+ llgtr %r3,%r3 # struct compat_iovec __user *
+ llgfr %r4,%r4 # unsigned long
+ llgtr %r5,%r5 # struct compat_iovec __user *
+ llgfr %r6,%r6 # unsigned long
+ llgf %r0,164(%r15) # unsigned long
+ stg %r0,160(%r15)
+ jg sys_process_vm_readv
+
+ENTRY(compat_sys_process_vm_writev_wrapper)
+ lgfr %r2,%r2 # compat_pid_t
+ llgtr %r3,%r3 # struct compat_iovec __user *
+ llgfr %r4,%r4 # unsigned long
+ llgtr %r5,%r5 # struct compat_iovec __user *
+ llgfr %r6,%r6 # unsigned long
+ llgf %r0,164(%r15) # unsigned long
+ stg %r0,160(%r15)
+ jg sys_process_vm_writev
S390_lowcore.machine_flags |= MACHINE_FLAG_MVCOS;
if (test_facility(40))
S390_lowcore.machine_flags |= MACHINE_FLAG_SPP;
+ if (test_facility(25))
+ S390_lowcore.machine_flags |= MACHINE_FLAG_STCKF;
#endif
}
if (ipl_info.type != IPL_TYPE_FCP_DUMP)
return;
+ if (OLDMEM_BASE)
+ return;
if (console_devno != -1)
sprintf(str, " cio_ignore=all,!0.0.%04x,!0.0.%04x",
ipl_info.data.fcp.dev_id.devno, console_devno);
#ifdef CONFIG_ZFCPDUMP
- if (ipl_info.type == IPL_TYPE_FCP_DUMP) {
+ if (ipl_info.type == IPL_TYPE_FCP_DUMP && !OLDMEM_BASE) {
memory_end = ZFCPDUMP_HSA_SIZE;
memory_end_set = 1;
}
SYSCALL(sys_clock_adjtime,sys_clock_adjtime,compat_sys_clock_adjtime_wrapper)
SYSCALL(sys_syncfs,sys_syncfs,sys_syncfs_wrapper)
SYSCALL(sys_setns,sys_setns,sys_setns_wrapper)
+SYSCALL(sys_process_vm_readv,sys_process_vm_readv,compat_sys_process_vm_readv_wrapper) /* 340 */
+SYSCALL(sys_process_vm_writev,sys_process_vm_writev,compat_sys_process_vm_writev_wrapper)
return mask;
}
-static void add_cpus_to_mask(struct topology_cpu *tl_cpu,
- struct mask_info *book, struct mask_info *core)
+static struct mask_info *add_cpus_to_mask(struct topology_cpu *tl_cpu,
+ struct mask_info *book,
+ struct mask_info *core,
+ int z10)
{
unsigned int cpu;
cpu_book_id[lcpu] = book->id;
#endif
cpumask_set_cpu(lcpu, &core->mask);
- cpu_core_id[lcpu] = core->id;
+ if (z10) {
+ cpu_core_id[lcpu] = rcpu;
+ core = core->next;
+ } else {
+ cpu_core_id[lcpu] = core->id;
+ }
smp_cpu_polarization[lcpu] = tl_cpu->pp;
}
}
+ return core;
}
static void clear_masks(void)
{
#ifdef CONFIG_SCHED_BOOK
struct mask_info *book = &book_info;
+ struct cpuid cpu_id;
#else
struct mask_info *book = NULL;
#endif
struct mask_info *core = &core_info;
union topology_entry *tle, *end;
+ int z10 = 0;
-
+#ifdef CONFIG_SCHED_BOOK
+ get_cpu_id(&cpu_id);
+ z10 = cpu_id.machine == 0x2097 || cpu_id.machine == 0x2098;
+#endif
spin_lock_irq(&topology_lock);
clear_masks();
tle = info->tle;
end = (union topology_entry *)((unsigned long)info + info->length);
while (tle < end) {
+#ifdef CONFIG_SCHED_BOOK
+ if (z10) {
+ switch (tle->nl) {
+ case 1:
+ book = book->next;
+ book->id = tle->container.id;
+ break;
+ case 0:
+ core = add_cpus_to_mask(&tle->cpu, book, core, z10);
+ break;
+ default:
+ clear_masks();
+ goto out;
+ }
+ tle = next_tle(tle);
+ continue;
+ }
+#endif
switch (tle->nl) {
#ifdef CONFIG_SCHED_BOOK
case 2:
core->id = tle->container.id;
break;
case 0:
- add_cpus_to_mask(&tle->cpu, book, core);
+ add_cpus_to_mask(&tle->cpu, book, core, z10);
break;
default:
clear_masks();
for (i = 0; i < TOPOLOGY_NR_MAG; i++)
printk(" %d", info->mag[i]);
printk(" / %d\n", info->mnest);
- alloc_masks(info, &core_info, 2);
+ alloc_masks(info, &core_info, 1);
#ifdef CONFIG_SCHED_BOOK
- alloc_masks(info, &book_info, 3);
+ alloc_masks(info, &book_info, 2);
#endif
}
NOTES :text :note
+ .dummy : { *(.dummy) } :data
+
RODATA
#ifdef CONFIG_SHARED_KERNEL
return -EOPNOTSUPP;
}
- atomic_clear_mask(CPUSTAT_RUNNING, &vcpu->arch.sie_block->cpuflags);
+ atomic_set_mask(CPUSTAT_STOPPED, &vcpu->arch.sie_block->cpuflags);
vcpu->run->s390_reset_flags |= KVM_S390_RESET_SUBSYSTEM;
vcpu->run->s390_reset_flags |= KVM_S390_RESET_IPL;
vcpu->run->s390_reset_flags |= KVM_S390_RESET_CPU_INIT;
int rc = 0;
vcpu->stat.exit_stop_request++;
- atomic_clear_mask(CPUSTAT_RUNNING, &vcpu->arch.sie_block->cpuflags);
spin_lock_bh(&vcpu->arch.local_int.lock);
if (vcpu->arch.local_int.action_bits & ACTION_STORE_ON_STOP) {
vcpu->arch.local_int.action_bits &= ~ACTION_STORE_ON_STOP;
}
if (vcpu->arch.local_int.action_bits & ACTION_STOP_ON_STOP) {
+ atomic_set_mask(CPUSTAT_STOPPED,
+ &vcpu->arch.sie_block->cpuflags);
vcpu->arch.local_int.action_bits &= ~ACTION_STOP_ON_STOP;
VCPU_EVENT(vcpu, 3, "%s", "cpu stopped");
rc = -EOPNOTSUPP;
offsetof(struct _lowcore, restart_psw), sizeof(psw_t));
if (rc == -EFAULT)
exception = 1;
+ atomic_clear_mask(CPUSTAT_STOPPED, &vcpu->arch.sie_block->cpuflags);
break;
case KVM_S390_PROGRAM_INT:
{ "instruction_stfl", VCPU_STAT(instruction_stfl) },
{ "instruction_tprot", VCPU_STAT(instruction_tprot) },
{ "instruction_sigp_sense", VCPU_STAT(instruction_sigp_sense) },
+ { "instruction_sigp_sense_running", VCPU_STAT(instruction_sigp_sense_running) },
{ "instruction_sigp_external_call", VCPU_STAT(instruction_sigp_external_call) },
{ "instruction_sigp_emergency", VCPU_STAT(instruction_sigp_emergency) },
{ "instruction_sigp_stop", VCPU_STAT(instruction_sigp_stop) },
switch (ext) {
case KVM_CAP_S390_PSW:
case KVM_CAP_S390_GMAP:
+ case KVM_CAP_SYNC_MMU:
r = 1;
break;
default:
restore_fp_regs(&vcpu->arch.guest_fpregs);
restore_access_regs(vcpu->arch.guest_acrs);
gmap_enable(vcpu->arch.gmap);
+ atomic_set_mask(CPUSTAT_RUNNING, &vcpu->arch.sie_block->cpuflags);
}
void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
{
+ atomic_clear_mask(CPUSTAT_RUNNING, &vcpu->arch.sie_block->cpuflags);
gmap_disable(vcpu->arch.gmap);
save_fp_regs(&vcpu->arch.guest_fpregs);
save_access_regs(vcpu->arch.guest_acrs);
int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu)
{
- atomic_set(&vcpu->arch.sie_block->cpuflags, CPUSTAT_ZARCH | CPUSTAT_SM);
+ atomic_set(&vcpu->arch.sie_block->cpuflags, CPUSTAT_ZARCH |
+ CPUSTAT_SM |
+ CPUSTAT_STOPPED);
vcpu->arch.sie_block->ecb = 6;
vcpu->arch.sie_block->eca = 0xC1002001U;
vcpu->arch.sie_block->fac = (int) (long) facilities;
{
int rc = 0;
- if (atomic_read(&vcpu->arch.sie_block->cpuflags) & CPUSTAT_RUNNING)
+ if (!(atomic_read(&vcpu->arch.sie_block->cpuflags) & CPUSTAT_STOPPED))
rc = -EBUSY;
else {
vcpu->run->psw_mask = psw.mask;
if (vcpu->sigset_active)
sigprocmask(SIG_SETMASK, &vcpu->sigset, &sigsaved);
- atomic_set_mask(CPUSTAT_RUNNING, &vcpu->arch.sie_block->cpuflags);
+ atomic_clear_mask(CPUSTAT_STOPPED, &vcpu->arch.sie_block->cpuflags);
BUG_ON(vcpu->kvm->arch.float_int.local_int[vcpu->vcpu_id] == NULL);
u64 address1 = disp1 + base1 ? vcpu->arch.guest_gprs[base1] : 0;
u64 address2 = disp2 + base2 ? vcpu->arch.guest_gprs[base2] : 0;
struct vm_area_struct *vma;
+ unsigned long user_address;
vcpu->stat.instruction_tprot++;
return -EOPNOTSUPP;
+ /* we must resolve the address without holding the mmap semaphore.
+ * This is ok since the userspace hypervisor is not supposed to change
+ * the mapping while the guest queries the memory. Otherwise the guest
+ * might crash or get wrong info anyway. */
+ user_address = (unsigned long) __guestaddr_to_user(vcpu, address1);
+
down_read(¤t->mm->mmap_sem);
- vma = find_vma(current->mm,
- (unsigned long) __guestaddr_to_user(vcpu, address1));
+ vma = find_vma(current->mm, user_address);
if (!vma) {
up_read(¤t->mm->mmap_sem);
return kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING);
#define SIGP_SET_PREFIX 0x0d
#define SIGP_STORE_STATUS_ADDR 0x0e
#define SIGP_SET_ARCH 0x12
+#define SIGP_SENSE_RUNNING 0x15
/* cpu status bits */
#define SIGP_STAT_EQUIPMENT_CHECK 0x80000000UL
+#define SIGP_STAT_NOT_RUNNING 0x00000400UL
#define SIGP_STAT_INCORRECT_STATE 0x00000200UL
#define SIGP_STAT_INVALID_PARAMETER 0x00000100UL
#define SIGP_STAT_EXT_CALL_PENDING 0x00000080UL
spin_lock(&fi->lock);
if (fi->local_int[cpu_addr] == NULL)
rc = 3; /* not operational */
- else if (atomic_read(fi->local_int[cpu_addr]->cpuflags)
- & CPUSTAT_RUNNING) {
+ else if (!(atomic_read(fi->local_int[cpu_addr]->cpuflags)
+ & CPUSTAT_STOPPED)) {
*reg &= 0xffffffff00000000UL;
rc = 1; /* status stored */
} else {
spin_lock_bh(&li->lock);
/* cpu must be in stopped state */
- if (atomic_read(li->cpuflags) & CPUSTAT_RUNNING) {
+ if (!(atomic_read(li->cpuflags) & CPUSTAT_STOPPED)) {
rc = 1; /* incorrect state */
*reg &= SIGP_STAT_INCORRECT_STATE;
kfree(inti);
return rc;
}
+static int __sigp_sense_running(struct kvm_vcpu *vcpu, u16 cpu_addr,
+ unsigned long *reg)
+{
+ int rc;
+ struct kvm_s390_float_interrupt *fi = &vcpu->kvm->arch.float_int;
+
+ if (cpu_addr >= KVM_MAX_VCPUS)
+ return 3; /* not operational */
+
+ spin_lock(&fi->lock);
+ if (fi->local_int[cpu_addr] == NULL)
+ rc = 3; /* not operational */
+ else {
+ if (atomic_read(fi->local_int[cpu_addr]->cpuflags)
+ & CPUSTAT_RUNNING) {
+ /* running */
+ rc = 1;
+ } else {
+ /* not running */
+ *reg &= 0xffffffff00000000UL;
+ *reg |= SIGP_STAT_NOT_RUNNING;
+ rc = 0;
+ }
+ }
+ spin_unlock(&fi->lock);
+
+ VCPU_EVENT(vcpu, 4, "sensed running status of cpu %x rc %x", cpu_addr,
+ rc);
+
+ return rc;
+}
+
int kvm_s390_handle_sigp(struct kvm_vcpu *vcpu)
{
int r1 = (vcpu->arch.sie_block->ipa & 0x00f0) >> 4;
rc = __sigp_set_prefix(vcpu, cpu_addr, parameter,
&vcpu->arch.guest_gprs[r1]);
break;
+ case SIGP_SENSE_RUNNING:
+ vcpu->stat.instruction_sigp_sense_running++;
+ rc = __sigp_sense_running(vcpu, cpu_addr,
+ &vcpu->arch.guest_gprs[r1]);
+ break;
case SIGP_RESTART:
vcpu->stat.instruction_sigp_restart++;
/* user space must know about restart */
} else {
/* Completion interrupt was faster than initial
* interrupt. Set pfault_wait to -1 so the initial
- * interrupt doesn't put the task to sleep. */
- tsk->thread.pfault_wait = -1;
+ * interrupt doesn't put the task to sleep.
+ * If the task is not running, ignore the completion
+ * interrupt since it must be a leftover of a PFAULT
+ * CANCEL operation which didn't remove all pending
+ * completion interrupts. */
+ if (tsk->state == TASK_RUNNING)
+ tsk->thread.pfault_wait = -1;
}
put_task_struct(tsk);
} else {
#endif /* !__ASSEMBLY__ */
#ifdef CONFIG_UNCACHED_MAPPING
+#if defined(CONFIG_29BIT)
+#define UNCAC_ADDR(addr) P2SEGADDR(addr)
+#define CAC_ADDR(addr) P1SEGADDR(addr)
+#else
#define UNCAC_ADDR(addr) ((addr) - PAGE_OFFSET + uncached_start)
#define CAC_ADDR(addr) ((addr) - uncached_start + PAGE_OFFSET)
+#endif
#else
#define UNCAC_ADDR(addr) ((addr))
#define CAC_ADDR(addr) ((addr))
#define __NR_syncfs 362
#define __NR_sendmmsg 363
#define __NR_setns 364
+#define __NR_process_vm_readv 365
+#define __NR_process_vm_writev 366
-#define NR_syscalls 365
+#define NR_syscalls 367
#ifdef __KERNEL__
#define __NR_syncfs 373
#define __NR_sendmmsg 374
#define __NR_setns 375
+#define __NR_process_vm_readv 376
+#define __NR_process_vm_writev 377
#ifdef __KERNEL__
-#define NR_syscalls 376
+#define NR_syscalls 378
#define __ARCH_WANT_IPC_PARSE_VERSION
#define __ARCH_WANT_OLD_READDIR
static struct plat_sci_port scif0_platform_data = {
.mapbase = 0xfffe8000,
.flags = UPF_BOOT_AUTOCONF,
- .scscr = SCSCR_RE | SCSCR_TE | SCSCR_REIE,
+ .scscr = SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE |
+ SCSCR_REIE,
.scbrr_algo_id = SCBRR_ALGO_2,
.type = PORT_SCIF,
.irqs = { 192, 192, 192, 192 },
+ .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
};
static struct platform_device scif0_device = {
static struct plat_sci_port scif1_platform_data = {
.mapbase = 0xfffe8800,
.flags = UPF_BOOT_AUTOCONF,
- .scscr = SCSCR_RE | SCSCR_TE | SCSCR_REIE,
+ .scscr = SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE |
+ SCSCR_REIE,
.scbrr_algo_id = SCBRR_ALGO_2,
.type = PORT_SCIF,
.irqs = { 196, 196, 196, 196 },
+ .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
};
static struct platform_device scif1_device = {
static struct plat_sci_port scif2_platform_data = {
.mapbase = 0xfffe9000,
.flags = UPF_BOOT_AUTOCONF,
- .scscr = SCSCR_RE | SCSCR_TE | SCSCR_REIE,
+ .scscr = SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE |
+ SCSCR_REIE,
.scbrr_algo_id = SCBRR_ALGO_2,
.type = PORT_SCIF,
.irqs = { 200, 200, 200, 200 },
+ .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
};
static struct platform_device scif2_device = {
static struct plat_sci_port scif3_platform_data = {
.mapbase = 0xfffe9800,
.flags = UPF_BOOT_AUTOCONF,
- .scscr = SCSCR_RE | SCSCR_TE | SCSCR_REIE,
+ .scscr = SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE |
+ SCSCR_REIE,
.scbrr_algo_id = SCBRR_ALGO_2,
.type = PORT_SCIF,
.irqs = { 204, 204, 204, 204 },
+ .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE,
};
static struct platform_device scif3_device = {
.long sys_syncfs
.long sys_sendmmsg
.long sys_setns
+ .long sys_process_vm_readv /* 365 */
+ .long sys_process_vm_writev
.long sys_syncfs
.long sys_sendmmsg
.long sys_setns /* 375 */
+ .long sys_process_vm_readv
+ .long sys_process_vm_writev
#define kern_addr_valid(addr) \
(test_bit(__pa((unsigned long)(addr))>>20, sparc_valid_addr_bitmap))
-extern int io_remap_pfn_range(struct vm_area_struct *vma,
- unsigned long from, unsigned long pfn,
- unsigned long size, pgprot_t prot);
-
/*
* For sparc32&64, the pfn in io_remap_pfn_range() carries <iospace> in
* its high 4 bits. These macros/functions put it there or get it from there.
#define GET_IOSPACE(pfn) (pfn >> (BITS_PER_LONG - 4))
#define GET_PFN(pfn) (pfn & 0x0fffffffUL)
+extern int remap_pfn_range(struct vm_area_struct *, unsigned long, unsigned long,
+ unsigned long, pgprot_t);
+
+static inline int io_remap_pfn_range(struct vm_area_struct *vma,
+ unsigned long from, unsigned long pfn,
+ unsigned long size, pgprot_t prot)
+{
+ unsigned long long offset, space, phys_base;
+
+ offset = ((unsigned long long) GET_PFN(pfn)) << PAGE_SHIFT;
+ space = GET_IOSPACE(pfn);
+ phys_base = offset | (space << 32ULL);
+
+ return remap_pfn_range(vma, from, phys_base >> PAGE_SHIFT, size, prot);
+}
+
#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
#define ptep_set_access_flags(__vma, __address, __ptep, __entry, __dirty) \
({ \
extern int page_in_phys_avail(unsigned long paddr);
-extern int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long from,
- unsigned long pfn,
- unsigned long size, pgprot_t prot);
-
/*
* For sparc32&64, the pfn in io_remap_pfn_range() carries <iospace> in
* its high 4 bits. These macros/functions put it there or get it from there.
#define GET_IOSPACE(pfn) (pfn >> (BITS_PER_LONG - 4))
#define GET_PFN(pfn) (pfn & 0x0fffffffffffffffUL)
+extern int remap_pfn_range(struct vm_area_struct *, unsigned long, unsigned long,
+ unsigned long, pgprot_t);
+
+static inline int io_remap_pfn_range(struct vm_area_struct *vma,
+ unsigned long from, unsigned long pfn,
+ unsigned long size, pgprot_t prot)
+{
+ unsigned long offset = GET_PFN(pfn) << PAGE_SHIFT;
+ int space = GET_IOSPACE(pfn);
+ unsigned long phys_base;
+
+ phys_base = offset | (((unsigned long) space) << 32UL);
+
+ return remap_pfn_range(vma, from, phys_base >> PAGE_SHIFT, size, prot);
+}
+
#include <asm-generic/pgtable.h>
/* We provide our own get_unmapped_area to cope with VA holes and
#define __NR_syncfs 335
#define __NR_sendmmsg 336
#define __NR_setns 337
+#define __NR_process_vm_readv 338
+#define __NR_process_vm_writev 339
-#define NR_syscalls 338
+#define NR_syscalls 340
#ifdef __32bit_syscall_numbers__
/* Sparc 32-bit only has the "setresuid32", "getresuid32" variants,
extern void fpload(unsigned long *fpregs, unsigned long *fsr);
#else /* CONFIG_SPARC32 */
+
+#include <asm/trap_block.h>
+
struct popc_3insn_patch_entry {
unsigned int addr;
unsigned int insns[3];
__popc_6insn_patch_end;
extern void __init per_cpu_patch(void);
+extern void sun4v_patch_1insn_range(struct sun4v_1insn_patch_entry *,
+ struct sun4v_1insn_patch_entry *);
+extern void sun4v_patch_2insn_range(struct sun4v_2insn_patch_entry *,
+ struct sun4v_2insn_patch_entry *);
extern void __init sun4v_patch(void);
extern void __init boot_cpu_id_too_large(int cpu);
extern unsigned int dcache_parity_tl1_occurred;
#include <asm/processor.h>
#include <asm/spitfire.h>
+#include "entry.h"
+
#ifdef CONFIG_SPARC64
#include <linux/jump_label.h>
}
#ifdef CONFIG_SPARC64
+static void do_patch_sections(const Elf_Ehdr *hdr,
+ const Elf_Shdr *sechdrs)
+{
+ const Elf_Shdr *s, *sun4v_1insn = NULL, *sun4v_2insn = NULL;
+ char *secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
+
+ for (s = sechdrs; s < sechdrs + hdr->e_shnum; s++) {
+ if (!strcmp(".sun4v_1insn_patch", secstrings + s->sh_name))
+ sun4v_1insn = s;
+ if (!strcmp(".sun4v_2insn_patch", secstrings + s->sh_name))
+ sun4v_2insn = s;
+ }
+
+ if (sun4v_1insn && tlb_type == hypervisor) {
+ void *p = (void *) sun4v_1insn->sh_addr;
+ sun4v_patch_1insn_range(p, p + sun4v_1insn->sh_size);
+ }
+ if (sun4v_2insn && tlb_type == hypervisor) {
+ void *p = (void *) sun4v_2insn->sh_addr;
+ sun4v_patch_2insn_range(p, p + sun4v_2insn->sh_size);
+ }
+}
+
int module_finalize(const Elf_Ehdr *hdr,
const Elf_Shdr *sechdrs,
struct module *me)
/* make jump label nops */
jump_label_apply_nops(me);
+ do_patch_sections(hdr, sechdrs);
+
/* Cheetah's I-cache is fully coherent. */
if (tlb_type == spitfire) {
unsigned long va;
}
}
-void __init sun4v_patch(void)
+void sun4v_patch_1insn_range(struct sun4v_1insn_patch_entry *start,
+ struct sun4v_1insn_patch_entry *end)
{
- extern void sun4v_hvapi_init(void);
- struct sun4v_1insn_patch_entry *p1;
- struct sun4v_2insn_patch_entry *p2;
-
- if (tlb_type != hypervisor)
- return;
+ while (start < end) {
+ unsigned long addr = start->addr;
- p1 = &__sun4v_1insn_patch;
- while (p1 < &__sun4v_1insn_patch_end) {
- unsigned long addr = p1->addr;
-
- *(unsigned int *) (addr + 0) = p1->insn;
+ *(unsigned int *) (addr + 0) = start->insn;
wmb();
__asm__ __volatile__("flush %0" : : "r" (addr + 0));
- p1++;
+ start++;
}
+}
- p2 = &__sun4v_2insn_patch;
- while (p2 < &__sun4v_2insn_patch_end) {
- unsigned long addr = p2->addr;
+void sun4v_patch_2insn_range(struct sun4v_2insn_patch_entry *start,
+ struct sun4v_2insn_patch_entry *end)
+{
+ while (start < end) {
+ unsigned long addr = start->addr;
- *(unsigned int *) (addr + 0) = p2->insns[0];
+ *(unsigned int *) (addr + 0) = start->insns[0];
wmb();
__asm__ __volatile__("flush %0" : : "r" (addr + 0));
- *(unsigned int *) (addr + 4) = p2->insns[1];
+ *(unsigned int *) (addr + 4) = start->insns[1];
wmb();
__asm__ __volatile__("flush %0" : : "r" (addr + 4));
- p2++;
+ start++;
}
+}
+
+void __init sun4v_patch(void)
+{
+ extern void sun4v_hvapi_init(void);
+
+ if (tlb_type != hypervisor)
+ return;
+
+ sun4v_patch_1insn_range(&__sun4v_1insn_patch,
+ &__sun4v_1insn_patch_end);
+
+ sun4v_patch_2insn_range(&__sun4v_2insn_patch,
+ &__sun4v_2insn_patch_end);
sun4v_hvapi_init();
}
* want to handle. Thus you cannot kill init even with a SIGKILL even by
* mistake.
*/
-void do_signal32(sigset_t *oldset, struct pt_regs * regs,
- int restart_syscall, unsigned long orig_i0)
+void do_signal32(sigset_t *oldset, struct pt_regs * regs)
{
struct k_sigaction ka;
+ unsigned long orig_i0;
+ int restart_syscall;
siginfo_t info;
int signr;
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
- /* If the debugger messes with the program counter, it clears
- * the "in syscall" bit, directing us to not perform a syscall
- * restart.
- */
- if (restart_syscall && !pt_regs_is_syscall(regs))
- restart_syscall = 0;
+ restart_syscall = 0;
+ orig_i0 = 0;
+ if (pt_regs_is_syscall(regs) &&
+ (regs->tstate & (TSTATE_XCARRY | TSTATE_ICARRY))) {
+ restart_syscall = 1;
+ orig_i0 = regs->u_regs[UREG_G6];
+ }
if (signr > 0) {
if (restart_syscall)
siginfo_t info;
int signr;
+ /* It's a lot of work and synchronization to add a new ptrace
+ * register for GDB to save and restore in order to get
+ * orig_i0 correct for syscall restarts when debugging.
+ *
+ * Although it should be the case that most of the global
+ * registers are volatile across a system call, glibc already
+ * depends upon that fact that we preserve them. So we can't
+ * just use any global register to save away the orig_i0 value.
+ *
+ * In particular %g2, %g3, %g4, and %g5 are all assumed to be
+ * preserved across a system call trap by various pieces of
+ * code in glibc.
+ *
+ * %g7 is used as the "thread register". %g6 is not used in
+ * any fixed manner. %g6 is used as a scratch register and
+ * a compiler temporary, but it's value is never used across
+ * a system call. Therefore %g6 is usable for orig_i0 storage.
+ */
if (pt_regs_is_syscall(regs) && (regs->psr & PSR_C))
- restart_syscall = 1;
- else
- restart_syscall = 0;
+ regs->u_regs[UREG_G6] = orig_i0;
if (test_thread_flag(TIF_RESTORE_SIGMASK))
oldset = ¤t->saved_sigmask;
* the software "in syscall" bit, directing us to not perform
* a syscall restart.
*/
- if (restart_syscall && !pt_regs_is_syscall(regs))
- restart_syscall = 0;
+ restart_syscall = 0;
+ if (pt_regs_is_syscall(regs) && (regs->psr & PSR_C)) {
+ restart_syscall = 1;
+ orig_i0 = regs->u_regs[UREG_G6];
+ }
+
if (signr > 0) {
if (restart_syscall)
siginfo_t info;
int signr;
+ /* It's a lot of work and synchronization to add a new ptrace
+ * register for GDB to save and restore in order to get
+ * orig_i0 correct for syscall restarts when debugging.
+ *
+ * Although it should be the case that most of the global
+ * registers are volatile across a system call, glibc already
+ * depends upon that fact that we preserve them. So we can't
+ * just use any global register to save away the orig_i0 value.
+ *
+ * In particular %g2, %g3, %g4, and %g5 are all assumed to be
+ * preserved across a system call trap by various pieces of
+ * code in glibc.
+ *
+ * %g7 is used as the "thread register". %g6 is not used in
+ * any fixed manner. %g6 is used as a scratch register and
+ * a compiler temporary, but it's value is never used across
+ * a system call. Therefore %g6 is usable for orig_i0 storage.
+ */
if (pt_regs_is_syscall(regs) &&
- (regs->tstate & (TSTATE_XCARRY | TSTATE_ICARRY))) {
- restart_syscall = 1;
- } else
- restart_syscall = 0;
+ (regs->tstate & (TSTATE_XCARRY | TSTATE_ICARRY)))
+ regs->u_regs[UREG_G6] = orig_i0;
if (current_thread_info()->status & TS_RESTORE_SIGMASK)
oldset = ¤t->saved_sigmask;
#ifdef CONFIG_COMPAT
if (test_thread_flag(TIF_32BIT)) {
- extern void do_signal32(sigset_t *, struct pt_regs *,
- int restart_syscall,
- unsigned long orig_i0);
- do_signal32(oldset, regs, restart_syscall, orig_i0);
+ extern void do_signal32(sigset_t *, struct pt_regs *);
+ do_signal32(oldset, regs);
return;
}
#endif
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
- /* If the debugger messes with the program counter, it clears
- * the software "in syscall" bit, directing us to not perform
- * a syscall restart.
- */
- if (restart_syscall && !pt_regs_is_syscall(regs))
- restart_syscall = 0;
+ restart_syscall = 0;
+ if (pt_regs_is_syscall(regs) &&
+ (regs->tstate & (TSTATE_XCARRY | TSTATE_ICARRY))) {
+ restart_syscall = 1;
+ orig_i0 = regs->u_regs[UREG_G6];
+ }
if (signr > 0) {
if (restart_syscall)
#include <linux/types.h>
#include <linux/thread_info.h>
#include <linux/uaccess.h>
+#include <linux/errno.h>
#include <asm/sigcontext.h>
#include <asm/fpumacro.h>
/*320*/ .long sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv
/*325*/ .long sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_event_open, sys_recvmmsg, sys_fanotify_init
/*330*/ .long sys_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, sys_open_by_handle_at, sys_clock_adjtime
-/*335*/ .long sys_syncfs, sys_sendmmsg, sys_setns
+/*335*/ .long sys_syncfs, sys_sendmmsg, sys_setns, sys_process_vm_readv, sys_process_vm_writev
/*320*/ .word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, compat_sys_preadv
.word compat_sys_pwritev, compat_sys_rt_tgsigqueueinfo, sys_perf_event_open, compat_sys_recvmmsg, sys_fanotify_init
/*330*/ .word sys32_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, compat_sys_open_by_handle_at, compat_sys_clock_adjtime
- .word sys_syncfs, compat_sys_sendmmsg, sys_setns
+ .word sys_syncfs, compat_sys_sendmmsg, sys_setns, compat_sys_process_vm_readv, compat_sys_process_vm_writev
#endif /* CONFIG_COMPAT */
/*320*/ .word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv
.word sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_event_open, sys_recvmmsg, sys_fanotify_init
/*330*/ .word sys_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, sys_open_by_handle_at, sys_clock_adjtime
- .word sys_syncfs, sys_sendmmsg, sys_setns
+ .word sys_syncfs, sys_sendmmsg, sys_setns, sys_process_vm_readv, sys_process_vm_writev
obj-y += fault_$(BITS).o
obj-y += init_$(BITS).o
obj-$(CONFIG_SPARC32) += loadmmu.o
-obj-y += generic_$(BITS).o
obj-$(CONFIG_SPARC32) += extable.o btfixup.o srmmu.o iommu.o io-unit.o
obj-$(CONFIG_SPARC32) += hypersparc.o viking.o tsunami.o swift.o
obj-$(CONFIG_SPARC_LEON)+= leon_mm.o
+++ /dev/null
-/*
- * generic.c: Generic Sparc mm routines that are not dependent upon
- * MMU type but are Sparc specific.
- *
- * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/pagemap.h>
-#include <linux/export.h>
-
-#include <asm/pgalloc.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/cacheflush.h>
-#include <asm/tlbflush.h>
-
-/* Remap IO memory, the same way as remap_pfn_range(), but use
- * the obio memory space.
- *
- * They use a pgprot that sets PAGE_IO and does not check the
- * mem_map table as this is independent of normal memory.
- */
-static inline void io_remap_pte_range(struct mm_struct *mm, pte_t * pte, unsigned long address, unsigned long size,
- unsigned long offset, pgprot_t prot, int space)
-{
- unsigned long end;
-
- address &= ~PMD_MASK;
- end = address + size;
- if (end > PMD_SIZE)
- end = PMD_SIZE;
- do {
- set_pte_at(mm, address, pte, mk_pte_io(offset, prot, space));
- address += PAGE_SIZE;
- offset += PAGE_SIZE;
- pte++;
- } while (address < end);
-}
-
-static inline int io_remap_pmd_range(struct mm_struct *mm, pmd_t * pmd, unsigned long address, unsigned long size,
- unsigned long offset, pgprot_t prot, int space)
-{
- unsigned long end;
-
- address &= ~PGDIR_MASK;
- end = address + size;
- if (end > PGDIR_SIZE)
- end = PGDIR_SIZE;
- offset -= address;
- do {
- pte_t *pte = pte_alloc_map(mm, NULL, pmd, address);
- if (!pte)
- return -ENOMEM;
- io_remap_pte_range(mm, pte, address, end - address, address + offset, prot, space);
- address = (address + PMD_SIZE) & PMD_MASK;
- pmd++;
- } while (address < end);
- return 0;
-}
-
-int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long from,
- unsigned long pfn, unsigned long size, pgprot_t prot)
-{
- int error = 0;
- pgd_t * dir;
- unsigned long beg = from;
- unsigned long end = from + size;
- struct mm_struct *mm = vma->vm_mm;
- int space = GET_IOSPACE(pfn);
- unsigned long offset = GET_PFN(pfn) << PAGE_SHIFT;
-
- /* See comment in mm/memory.c remap_pfn_range */
- vma->vm_flags |= VM_IO | VM_RESERVED | VM_PFNMAP;
- vma->vm_pgoff = (offset >> PAGE_SHIFT) |
- ((unsigned long)space << 28UL);
-
- offset -= from;
- dir = pgd_offset(mm, from);
- flush_cache_range(vma, beg, end);
-
- while (from < end) {
- pmd_t *pmd = pmd_alloc(mm, dir, from);
- error = -ENOMEM;
- if (!pmd)
- break;
- error = io_remap_pmd_range(mm, pmd, from, end - from, offset + from, prot, space);
- if (error)
- break;
- from = (from + PGDIR_SIZE) & PGDIR_MASK;
- dir++;
- }
-
- flush_tlb_range(vma, beg, end);
- return error;
-}
-EXPORT_SYMBOL(io_remap_pfn_range);
+++ /dev/null
-/*
- * generic.c: Generic Sparc mm routines that are not dependent upon
- * MMU type but are Sparc specific.
- *
- * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/export.h>
-#include <linux/pagemap.h>
-
-#include <asm/pgalloc.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/tlbflush.h>
-
-/* Remap IO memory, the same way as remap_pfn_range(), but use
- * the obio memory space.
- *
- * They use a pgprot that sets PAGE_IO and does not check the
- * mem_map table as this is independent of normal memory.
- */
-static inline void io_remap_pte_range(struct mm_struct *mm, pte_t * pte,
- unsigned long address,
- unsigned long size,
- unsigned long offset, pgprot_t prot,
- int space)
-{
- unsigned long end;
-
- /* clear hack bit that was used as a write_combine side-effect flag */
- offset &= ~0x1UL;
- address &= ~PMD_MASK;
- end = address + size;
- if (end > PMD_SIZE)
- end = PMD_SIZE;
- do {
- pte_t entry;
- unsigned long curend = address + PAGE_SIZE;
-
- entry = mk_pte_io(offset, prot, space, PAGE_SIZE);
- if (!(address & 0xffff)) {
- if (PAGE_SIZE < (4 * 1024 * 1024) &&
- !(address & 0x3fffff) &&
- !(offset & 0x3ffffe) &&
- end >= address + 0x400000) {
- entry = mk_pte_io(offset, prot, space,
- 4 * 1024 * 1024);
- curend = address + 0x400000;
- offset += 0x400000;
- } else if (PAGE_SIZE < (512 * 1024) &&
- !(address & 0x7ffff) &&
- !(offset & 0x7fffe) &&
- end >= address + 0x80000) {
- entry = mk_pte_io(offset, prot, space,
- 512 * 1024 * 1024);
- curend = address + 0x80000;
- offset += 0x80000;
- } else if (PAGE_SIZE < (64 * 1024) &&
- !(offset & 0xfffe) &&
- end >= address + 0x10000) {
- entry = mk_pte_io(offset, prot, space,
- 64 * 1024);
- curend = address + 0x10000;
- offset += 0x10000;
- } else
- offset += PAGE_SIZE;
- } else
- offset += PAGE_SIZE;
-
- if (pte_write(entry))
- entry = pte_mkdirty(entry);
- do {
- BUG_ON(!pte_none(*pte));
- set_pte_at(mm, address, pte, entry);
- address += PAGE_SIZE;
- pte_val(entry) += PAGE_SIZE;
- pte++;
- } while (address < curend);
- } while (address < end);
-}
-
-static inline int io_remap_pmd_range(struct mm_struct *mm, pmd_t * pmd, unsigned long address, unsigned long size,
- unsigned long offset, pgprot_t prot, int space)
-{
- unsigned long end;
-
- address &= ~PGDIR_MASK;
- end = address + size;
- if (end > PGDIR_SIZE)
- end = PGDIR_SIZE;
- offset -= address;
- do {
- pte_t *pte = pte_alloc_map(mm, NULL, pmd, address);
- if (!pte)
- return -ENOMEM;
- io_remap_pte_range(mm, pte, address, end - address, address + offset, prot, space);
- pte_unmap(pte);
- address = (address + PMD_SIZE) & PMD_MASK;
- pmd++;
- } while (address < end);
- return 0;
-}
-
-static inline int io_remap_pud_range(struct mm_struct *mm, pud_t * pud, unsigned long address, unsigned long size,
- unsigned long offset, pgprot_t prot, int space)
-{
- unsigned long end;
-
- address &= ~PUD_MASK;
- end = address + size;
- if (end > PUD_SIZE)
- end = PUD_SIZE;
- offset -= address;
- do {
- pmd_t *pmd = pmd_alloc(mm, pud, address);
- if (!pud)
- return -ENOMEM;
- io_remap_pmd_range(mm, pmd, address, end - address, address + offset, prot, space);
- address = (address + PUD_SIZE) & PUD_MASK;
- pud++;
- } while (address < end);
- return 0;
-}
-
-int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long from,
- unsigned long pfn, unsigned long size, pgprot_t prot)
-{
- int error = 0;
- pgd_t * dir;
- unsigned long beg = from;
- unsigned long end = from + size;
- struct mm_struct *mm = vma->vm_mm;
- int space = GET_IOSPACE(pfn);
- unsigned long offset = GET_PFN(pfn) << PAGE_SHIFT;
- unsigned long phys_base;
-
- phys_base = offset | (((unsigned long) space) << 32UL);
-
- /* See comment in mm/memory.c remap_pfn_range */
- vma->vm_flags |= VM_IO | VM_RESERVED | VM_PFNMAP;
- vma->vm_pgoff = phys_base >> PAGE_SHIFT;
-
- offset -= from;
- dir = pgd_offset(mm, from);
- flush_cache_range(vma, beg, end);
-
- while (from < end) {
- pud_t *pud = pud_alloc(mm, dir, from);
- error = -ENOMEM;
- if (!pud)
- break;
- error = io_remap_pud_range(mm, pud, from, end - from, offset + from, prot, space);
- if (error)
- break;
- from = (from + PGDIR_SIZE) & PGDIR_MASK;
- dir++;
- }
-
- flush_tlb_range(vma, beg, end);
- return error;
-}
-EXPORT_SYMBOL(io_remap_pfn_range);
config I2C_BATTERY_BQ27200
tristate "I2C Battery BQ27200 Support"
- select PUV3_I2C
+ select I2C_PUV3
select POWER_SUPPLY
select BATTERY_BQ27x00
config I2C_EEPROM_AT24
tristate "I2C EEPROMs AT24 support"
- select PUV3_I2C
+ select I2C_PUV3
select MISC_DEVICES
select EEPROM_AT24
Say Y here if you want the debug print routines to direct their
output to the UniCore On-Chip-Debugger channel using CP #1.
-config DEBUG_OCD_BREAKPOINT
- bool "Breakpoint support via On-Chip-Debugger"
- depends on DEBUG_OCD
-
-config DEBUG_UART
- int "Kernel low-level debugging messages via serial port"
- depends on DEBUG_LL
- range 0 1
- default "0"
- help
- Choice for UART for kernel low-level using PKUnity UARTS,
- should be between zero and one. The port must have been
- initialised by the boot-loader before use.
-
endmenu
# Copyright (C) 2001~2010 GUAN Xue-tao
#
-EXTRA_CFLAGS := -fpic -fno-builtin
-EXTRA_AFLAGS := -Wa,-march=all
+ccflags-y := -fpic -fno-builtin
+asflags-y := -Wa,-march=all
OBJS := misc.o
#ifndef __UNICORE_BITOPS_H__
#define __UNICORE_BITOPS_H__
-#define find_next_bit __uc32_find_next_bit
-#define find_next_zero_bit __uc32_find_next_zero_bit
-
-#define find_first_bit __uc32_find_first_bit
-#define find_first_zero_bit __uc32_find_first_zero_bit
-
#define _ASM_GENERIC_BITOPS_FLS_H_
#define _ASM_GENERIC_BITOPS___FLS_H_
#define _ASM_GENERIC_BITOPS_FFS_H_
#include <asm-generic/bitops.h>
+/* following definitions: to avoid using codes in lib/find_*.c */
+#define find_next_bit find_next_bit
+#define find_next_zero_bit find_next_zero_bit
+#define find_first_bit find_first_bit
+#define find_first_zero_bit find_first_zero_bit
+
#endif /* __UNICORE_BITOPS_H__ */
#define start_thread(regs, pc, sp) \
({ \
unsigned long *stack = (unsigned long *)sp; \
- set_fs(USER_DS); \
memset(regs->uregs, 0, sizeof(regs->uregs)); \
regs->UCreg_asr = USER_MODE; \
regs->UCreg_pc = pc & ~1; /* pc */ \
#include "ksyms.h"
-EXPORT_SYMBOL(__uc32_find_next_zero_bit);
-EXPORT_SYMBOL(__uc32_find_next_bit);
+EXPORT_SYMBOL(find_next_zero_bit);
+EXPORT_SYMBOL(find_next_bit);
EXPORT_SYMBOL(__backtrace);
* Purpose : Find a 'zero' bit
* Prototype: int find_first_zero_bit(void *addr, unsigned int maxbit);
*/
-__uc32_find_first_zero_bit:
+ENTRY(find_first_zero_bit)
cxor.a r1, #0
beq 3f
mov r2, #0
bub 1b
3: mov r0, r1 @ no free bits
mov pc, lr
+ENDPROC(find_first_zero_bit)
/*
* Purpose : Find next 'zero' bit
* Prototype: int find_next_zero_bit
* (void *addr, unsigned int maxbit, int offset)
*/
-ENTRY(__uc32_find_next_zero_bit)
+ENTRY(find_next_zero_bit)
cxor.a r1, #0
beq 3b
and.a ip, r2, #7
or r2, r2, #7 @ if zero, then no bits here
add r2, r2, #1 @ align bit pointer
b 2b @ loop for next bit
-ENDPROC(__uc32_find_next_zero_bit)
+ENDPROC(find_next_zero_bit)
/*
* Purpose : Find a 'one' bit
* Prototype: int find_first_bit
* (const unsigned long *addr, unsigned int maxbit);
*/
-__uc32_find_first_bit:
+ENTRY(find_first_bit)
cxor.a r1, #0
beq 3f
mov r2, #0
bub 1b
3: mov r0, r1 @ no free bits
mov pc, lr
+ENDPROC(find_first_bit)
/*
* Purpose : Find next 'one' bit
* Prototype: int find_next_zero_bit
* (void *addr, unsigned int maxbit, int offset)
*/
-ENTRY(__uc32_find_next_bit)
+ENTRY(find_next_bit)
cxor.a r1, #0
beq 3b
and.a ip, r2, #7
or r2, r2, #7 @ if zero, then no bits here
add r2, r2, #1 @ align bit pointer
b 2b @ loop for next bit
-ENDPROC(__uc32_find_next_bit)
+ENDPROC(find_next_bit)
/*
* One or more bits in the LSB of r3 are assumed to be set.
extern int local_apic_timer_c2_ok;
extern int disable_apic;
+extern unsigned int lapic_timer_frequency;
#ifdef CONFIG_SMP
extern void __inquire_remote_apic(int apicid);
#define NMI_REASON_CLEAR_IOCHK 0x08
#define NMI_REASON_CLEAR_MASK 0x0f
-static inline unsigned char get_nmi_reason(void)
+static inline unsigned char default_get_nmi_reason(void)
{
return inb(NMI_REASON_PORT);
}
void mce_notify_process(void);
DECLARE_PER_CPU(struct mce, injectm);
-extern struct file_operations mce_chrdev_ops;
+
+extern void register_mce_write_callback(ssize_t (*)(struct file *filp,
+ const char __user *ubuf,
+ size_t usize, loff_t *off));
/*
* Exception handler
extern enum mrst_timer_options mrst_timer_options;
+/*
+ * Penwell uses spread spectrum clock, so the freq number is not exactly
+ * the same as reported by MSR based on SDM.
+ */
+#define PENWELL_FSB_FREQ_83SKU 83200
+#define PENWELL_FSB_FREQ_100SKU 99840
+
#define SFI_MTMR_MAX_NUM 8
#define SFI_MRTC_MAX 8
/**
* struct x86_platform_ops - platform specific runtime functions
* @calibrate_tsc: calibrate TSC
+ * @wallclock_init: init the wallclock device
* @get_wallclock: get time from HW clock like RTC etc.
* @set_wallclock: set time back to HW clock
* @is_untracked_pat_range exclude from PAT logic
*/
struct x86_platform_ops {
unsigned long (*calibrate_tsc)(void);
+ void (*wallclock_init)(void);
unsigned long (*get_wallclock)(void);
int (*set_wallclock)(unsigned long nowtime);
void (*iommu_shutdown)(void);
bool (*is_untracked_pat_range)(u64 start, u64 end);
void (*nmi_init)(void);
+ unsigned char (*get_nmi_reason)(void);
int (*i8042_detect)(void);
};
atomic_set(&stop_machine_first, 1);
wrote_text = 0;
- __stop_machine(stop_machine_text_poke, (void *)&tpp, NULL);
+ __stop_machine(stop_machine_text_poke, (void *)&tpp, cpu_online_mask);
}
.flags = IORESOURCE_MEM | IORESOURCE_BUSY,
};
-static unsigned int calibration_result;
+unsigned int lapic_timer_frequency = 0;
static void apic_pm_activate(void);
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
case CLOCK_EVT_MODE_ONESHOT:
- __setup_APIC_LVTT(calibration_result,
+ __setup_APIC_LVTT(lapic_timer_frequency,
mode != CLOCK_EVT_MODE_PERIODIC, 1);
break;
case CLOCK_EVT_MODE_UNUSED:
long delta, deltatsc;
int pm_referenced = 0;
+ /**
+ * check if lapic timer has already been calibrated by platform
+ * specific routine, such as tsc calibration code. if so, we just fill
+ * in the clockevent structure and return.
+ */
+
+ if (lapic_timer_frequency) {
+ apic_printk(APIC_VERBOSE, "lapic timer already calibrated %d\n",
+ lapic_timer_frequency);
+ lapic_clockevent.mult = div_sc(lapic_timer_frequency/APIC_DIVISOR,
+ TICK_NSEC, lapic_clockevent.shift);
+ lapic_clockevent.max_delta_ns =
+ clockevent_delta2ns(0x7FFFFF, &lapic_clockevent);
+ lapic_clockevent.min_delta_ns =
+ clockevent_delta2ns(0xF, &lapic_clockevent);
+ lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY;
+ return 0;
+ }
+
local_irq_disable();
/* Replace the global interrupt handler */
lapic_clockevent.min_delta_ns =
clockevent_delta2ns(0xF, &lapic_clockevent);
- calibration_result = (delta * APIC_DIVISOR) / LAPIC_CAL_LOOPS;
+ lapic_timer_frequency = (delta * APIC_DIVISOR) / LAPIC_CAL_LOOPS;
apic_printk(APIC_VERBOSE, "..... delta %ld\n", delta);
apic_printk(APIC_VERBOSE, "..... mult: %u\n", lapic_clockevent.mult);
apic_printk(APIC_VERBOSE, "..... calibration result: %u\n",
- calibration_result);
+ lapic_timer_frequency);
if (cpu_has_tsc) {
apic_printk(APIC_VERBOSE, "..... CPU clock speed is "
apic_printk(APIC_VERBOSE, "..... host bus clock speed is "
"%u.%04u MHz.\n",
- calibration_result / (1000000 / HZ),
- calibration_result % (1000000 / HZ));
+ lapic_timer_frequency / (1000000 / HZ),
+ lapic_timer_frequency % (1000000 / HZ));
/*
* Do a sanity check on the APIC calibration result
*/
- if (calibration_result < (1000000 / HZ)) {
+ if (lapic_timer_frequency < (1000000 / HZ)) {
local_irq_enable();
pr_warning("APIC frequency too slow, disabling apic timer\n");
return -1;
struct irq_cfg *cfg;
int count, node, i;
- if (!legacy_pic->nr_legacy_irqs) {
- nr_irqs_gsi = 0;
+ if (!legacy_pic->nr_legacy_irqs)
io_apic_irqs = ~0UL;
- }
for (i = 0; i < nr_ioapics; i++) {
ioapics[i].saved_registers =
int ioapic_idx;
struct irq_cfg *cfg;
unsigned int irq;
+ struct irq_chip *chip;
printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries);
for (ioapic_idx = 0; ioapic_idx < nr_ioapics; ioapic_idx++)
for_each_active_irq(irq) {
struct irq_pin_list *entry;
+ chip = irq_get_chip(irq);
+ if (chip != &ioapic_chip)
+ continue;
+
cfg = irq_get_chip_data(irq);
if (!cfg)
continue;
if (!alloc_cpumask_var(&mce_inject_cpumask, GFP_KERNEL))
return -ENOMEM;
printk(KERN_INFO "Machine check injector initialized\n");
- mce_chrdev_ops.write = mce_write;
+ register_mce_write_callback(mce_write);
register_nmi_handler(NMI_LOCAL, mce_raise_notify, 0,
"mce_notify");
return 0;
}
}
-/* Modified in mce-inject.c, so not static or const */
-struct file_operations mce_chrdev_ops = {
+static ssize_t (*mce_write)(struct file *filp, const char __user *ubuf,
+ size_t usize, loff_t *off);
+
+void register_mce_write_callback(ssize_t (*fn)(struct file *filp,
+ const char __user *ubuf,
+ size_t usize, loff_t *off))
+{
+ mce_write = fn;
+}
+EXPORT_SYMBOL_GPL(register_mce_write_callback);
+
+ssize_t mce_chrdev_write(struct file *filp, const char __user *ubuf,
+ size_t usize, loff_t *off)
+{
+ if (mce_write)
+ return mce_write(filp, ubuf, usize, off);
+ else
+ return -EINVAL;
+}
+
+static const struct file_operations mce_chrdev_ops = {
.open = mce_chrdev_open,
.release = mce_chrdev_release,
.read = mce_chrdev_read,
+ .write = mce_chrdev_write,
.poll = mce_chrdev_poll,
.unlocked_ioctl = mce_chrdev_ioctl,
.llseek = no_llseek,
};
-EXPORT_SYMBOL_GPL(mce_chrdev_ops);
static struct miscdevice mce_chrdev_device = {
MISC_MCELOG_MINOR,
struct pvclock_vcpu_time_info *src;
cycle_t ret;
- src = &get_cpu_var(hv_clock);
+ preempt_disable_notrace();
+ src = &__get_cpu_var(hv_clock);
ret = pvclock_clocksource_read(src);
- put_cpu_var(hv_clock);
+ preempt_enable_notrace();
return ret;
}
#include <asm/traps.h>
#include <asm/mach_traps.h>
#include <asm/nmi.h>
+#include <asm/x86_init.h>
#define NMI_MAX_NAMELEN 16
struct nmiaction {
/* Non-CPU-specific NMI: NMI sources can be processed on any CPU */
raw_spin_lock(&nmi_reason_lock);
- reason = get_nmi_reason();
+ reason = x86_platform.get_nmi_reason();
if (reason & NMI_REASON_MASK) {
if (reason & NMI_REASON_SERR)
x86_init.timers.wallclock_init();
+ x86_platform.wallclock_init();
+
mcheck_init();
arch_init_ideal_nops();
#include <asm/pat.h>
#include <asm/tsc.h>
#include <asm/iommu.h>
+#include <asm/mach_traps.h>
void __cpuinit x86_init_noop(void) { }
void __init x86_init_uint_noop(unsigned int unused) { }
void __init x86_init_pgd_noop(pgd_t *unused) { }
int __init iommu_init_noop(void) { return 0; }
void iommu_shutdown_noop(void) { }
+void wallclock_init_noop(void) { }
/*
* The platform setup functions are preset with the default functions
struct x86_platform_ops x86_platform = {
.calibrate_tsc = native_calibrate_tsc,
+ .wallclock_init = wallclock_init_noop,
.get_wallclock = mach_get_cmos_time,
.set_wallclock = mach_set_rtc_mmss,
.iommu_shutdown = iommu_shutdown_noop,
.is_untracked_pat_range = is_ISA_range,
.nmi_init = default_nmi_init,
+ .get_nmi_reason = default_get_nmi_reason,
.i8042_detect = default_i8042_detect
};
#include <asm/mce.h>
#include <asm/i387.h>
#include <asm/xcr.h>
+#include <asm/perf_event.h>
#include "trace.h"
static int ple_window = KVM_VMX_DEFAULT_PLE_WINDOW;
module_param(ple_window, int, S_IRUGO);
-#define NR_AUTOLOAD_MSRS 1
+#define NR_AUTOLOAD_MSRS 8
#define VMCS02_POOL_SIZE 1
struct vmcs {
static unsigned long *vmx_msr_bitmap_longmode;
static bool cpu_has_load_ia32_efer;
+static bool cpu_has_load_perf_global_ctrl;
static DECLARE_BITMAP(vmx_vpid_bitmap, VMX_NR_VPIDS);
static DEFINE_SPINLOCK(vmx_vpid_lock);
vmcs_write32(EXCEPTION_BITMAP, eb);
}
+static void clear_atomic_switch_msr_special(unsigned long entry,
+ unsigned long exit)
+{
+ vmcs_clear_bits(VM_ENTRY_CONTROLS, entry);
+ vmcs_clear_bits(VM_EXIT_CONTROLS, exit);
+}
+
static void clear_atomic_switch_msr(struct vcpu_vmx *vmx, unsigned msr)
{
unsigned i;
struct msr_autoload *m = &vmx->msr_autoload;
- if (msr == MSR_EFER && cpu_has_load_ia32_efer) {
- vmcs_clear_bits(VM_ENTRY_CONTROLS, VM_ENTRY_LOAD_IA32_EFER);
- vmcs_clear_bits(VM_EXIT_CONTROLS, VM_EXIT_LOAD_IA32_EFER);
- return;
+ switch (msr) {
+ case MSR_EFER:
+ if (cpu_has_load_ia32_efer) {
+ clear_atomic_switch_msr_special(VM_ENTRY_LOAD_IA32_EFER,
+ VM_EXIT_LOAD_IA32_EFER);
+ return;
+ }
+ break;
+ case MSR_CORE_PERF_GLOBAL_CTRL:
+ if (cpu_has_load_perf_global_ctrl) {
+ clear_atomic_switch_msr_special(
+ VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL,
+ VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL);
+ return;
+ }
+ break;
}
for (i = 0; i < m->nr; ++i)
vmcs_write32(VM_EXIT_MSR_LOAD_COUNT, m->nr);
}
+static void add_atomic_switch_msr_special(unsigned long entry,
+ unsigned long exit, unsigned long guest_val_vmcs,
+ unsigned long host_val_vmcs, u64 guest_val, u64 host_val)
+{
+ vmcs_write64(guest_val_vmcs, guest_val);
+ vmcs_write64(host_val_vmcs, host_val);
+ vmcs_set_bits(VM_ENTRY_CONTROLS, entry);
+ vmcs_set_bits(VM_EXIT_CONTROLS, exit);
+}
+
static void add_atomic_switch_msr(struct vcpu_vmx *vmx, unsigned msr,
u64 guest_val, u64 host_val)
{
unsigned i;
struct msr_autoload *m = &vmx->msr_autoload;
- if (msr == MSR_EFER && cpu_has_load_ia32_efer) {
- vmcs_write64(GUEST_IA32_EFER, guest_val);
- vmcs_write64(HOST_IA32_EFER, host_val);
- vmcs_set_bits(VM_ENTRY_CONTROLS, VM_ENTRY_LOAD_IA32_EFER);
- vmcs_set_bits(VM_EXIT_CONTROLS, VM_EXIT_LOAD_IA32_EFER);
- return;
+ switch (msr) {
+ case MSR_EFER:
+ if (cpu_has_load_ia32_efer) {
+ add_atomic_switch_msr_special(VM_ENTRY_LOAD_IA32_EFER,
+ VM_EXIT_LOAD_IA32_EFER,
+ GUEST_IA32_EFER,
+ HOST_IA32_EFER,
+ guest_val, host_val);
+ return;
+ }
+ break;
+ case MSR_CORE_PERF_GLOBAL_CTRL:
+ if (cpu_has_load_perf_global_ctrl) {
+ add_atomic_switch_msr_special(
+ VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL,
+ VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL,
+ GUEST_IA32_PERF_GLOBAL_CTRL,
+ HOST_IA32_PERF_GLOBAL_CTRL,
+ guest_val, host_val);
+ return;
+ }
+ break;
}
for (i = 0; i < m->nr; ++i)
if (m->guest[i].index == msr)
break;
- if (i == m->nr) {
+ if (i == NR_AUTOLOAD_MSRS) {
+ printk_once(KERN_WARNING"Not enough mst switch entries. "
+ "Can't add msr %x\n", msr);
+ return;
+ } else if (i == m->nr) {
++m->nr;
vmcs_write32(VM_ENTRY_MSR_LOAD_COUNT, m->nr);
vmcs_write32(VM_EXIT_MSR_LOAD_COUNT, m->nr);
&& allow_1_setting(MSR_IA32_VMX_EXIT_CTLS,
VM_EXIT_LOAD_IA32_EFER);
+ cpu_has_load_perf_global_ctrl =
+ allow_1_setting(MSR_IA32_VMX_ENTRY_CTLS,
+ VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL)
+ && allow_1_setting(MSR_IA32_VMX_EXIT_CTLS,
+ VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL);
+
+ /*
+ * Some cpus support VM_ENTRY_(LOAD|SAVE)_IA32_PERF_GLOBAL_CTRL
+ * but due to arrata below it can't be used. Workaround is to use
+ * msr load mechanism to switch IA32_PERF_GLOBAL_CTRL.
+ *
+ * VM Exit May Incorrectly Clear IA32_PERF_GLOBAL_CTRL [34:32]
+ *
+ * AAK155 (model 26)
+ * AAP115 (model 30)
+ * AAT100 (model 37)
+ * BC86,AAY89,BD102 (model 44)
+ * BA97 (model 46)
+ *
+ */
+ if (cpu_has_load_perf_global_ctrl && boot_cpu_data.x86 == 0x6) {
+ switch (boot_cpu_data.x86_model) {
+ case 26:
+ case 30:
+ case 37:
+ case 44:
+ case 46:
+ cpu_has_load_perf_global_ctrl = false;
+ printk_once(KERN_WARNING"kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL "
+ "does not work properly. Using workaround\n");
+ break;
+ default:
+ break;
+ }
+ }
+
return 0;
}
vmcs_write32(VM_ENTRY_INTR_INFO_FIELD, 0);
}
+static void atomic_switch_perf_msrs(struct vcpu_vmx *vmx)
+{
+ int i, nr_msrs;
+ struct perf_guest_switch_msr *msrs;
+
+ msrs = perf_guest_get_msrs(&nr_msrs);
+
+ if (!msrs)
+ return;
+
+ for (i = 0; i < nr_msrs; i++)
+ if (msrs[i].host == msrs[i].guest)
+ clear_atomic_switch_msr(vmx, msrs[i].msr);
+ else
+ add_atomic_switch_msr(vmx, msrs[i].msr, msrs[i].guest,
+ msrs[i].host);
+}
+
#ifdef CONFIG_X86_64
#define R "r"
#define Q "q"
if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP)
vmx_set_interrupt_shadow(vcpu, 0);
+ atomic_switch_perf_msrs(vmx);
+
vmx->__launched = vmx->loaded_vmcs->launched;
asm(
/* Store host registers */
}
#else
-static inline void sdv_serial_fixup(void);
+static inline void sdv_serial_fixup(void) {};
#endif
static void __init sdv_arch_setup(void)
static unsigned long __init mrst_calibrate_tsc(void)
{
unsigned long flags, fast_calibrate;
-
- local_irq_save(flags);
- fast_calibrate = apbt_quick_calibrate();
- local_irq_restore(flags);
-
+ if (__mrst_cpu_chip == MRST_CPU_CHIP_PENWELL) {
+ u32 lo, hi, ratio, fsb;
+
+ rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
+ pr_debug("IA32 perf status is 0x%x, 0x%0x\n", lo, hi);
+ ratio = (hi >> 8) & 0x1f;
+ pr_debug("ratio is %d\n", ratio);
+ if (!ratio) {
+ pr_err("read a zero ratio, should be incorrect!\n");
+ pr_err("force tsc ratio to 16 ...\n");
+ ratio = 16;
+ }
+ rdmsr(MSR_FSB_FREQ, lo, hi);
+ if ((lo & 0x7) == 0x7)
+ fsb = PENWELL_FSB_FREQ_83SKU;
+ else
+ fsb = PENWELL_FSB_FREQ_100SKU;
+ fast_calibrate = ratio * fsb;
+ pr_debug("read penwell tsc %lu khz\n", fast_calibrate);
+ lapic_timer_frequency = fsb * 1000 / HZ;
+ /* mark tsc clocksource as reliable */
+ set_cpu_cap(&boot_cpu_data, X86_FEATURE_TSC_RELIABLE);
+ } else {
+ local_irq_save(flags);
+ fast_calibrate = apbt_quick_calibrate();
+ local_irq_restore(flags);
+ }
+
if (fast_calibrate)
return fast_calibrate;
intel_scu_ipc_simple_command(0xf1, 0);
}
+/*
+ * Moorestown does not have external NMI source nor port 0x61 to report
+ * NMI status. The possible NMI sources are from pmu as a result of NMI
+ * watchdog or lock debug. Reading io port 0x61 results in 0xff which
+ * misled NMI handler.
+ */
+static unsigned char mrst_get_nmi_reason(void)
+{
+ return 0;
+}
+
/*
* Moorestown specific x86_init function overrides and early setup
* calls.
x86_platform.calibrate_tsc = mrst_calibrate_tsc;
x86_platform.i8042_detect = mrst_i8042_detect;
x86_init.timers.wallclock_init = mrst_rtc_init;
+ x86_platform.get_nmi_reason = mrst_get_nmi_reason;
+
x86_init.pci.init = pci_mrst_init;
x86_init.pci.fixup_irqs = x86_init_noop;
}
static const struct devs_id __initconst device_ids[] = {
+ {"bma023", SFI_DEV_TYPE_I2C, 1, &no_platform_data},
{"pmic_gpio", SFI_DEV_TYPE_SPI, 1, &pmic_gpio_platform_data},
{"spi_max3111", SFI_DEV_TYPE_SPI, 0, &max3111_platform_data},
{"i2c_max7315", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data},
spin_unlock_irqrestore(&rtc_lock, flags);
- /* vRTC YEAR reg contains the offset to 1960 */
- year += 1960;
+ /* vRTC YEAR reg contains the offset to 1972 */
+ year += 1972;
printk(KERN_INFO "vRTC: sec: %d min: %d hour: %d day: %d "
"mon: %d year: %d\n", sec, min, hour, mday, mon, year);
#endif
#define KSTK_EIP(tsk) KSTK_REG(tsk, HOST_IP)
-#define KSTK_ESP(tsk) KSTK_REG(tsk, HOST_IP)
+#define KSTK_ESP(tsk) KSTK_REG(tsk, HOST_SP)
#define KSTK_EBP(tsk) KSTK_REG(tsk, HOST_BP)
#define ARCH_IS_STACKGROW(address) \
int cpu = (long)hcpu;
switch (action) {
case CPU_UP_PREPARE:
- per_cpu(xen_vcpu, cpu) = &HYPERVISOR_shared_info->vcpu_info[cpu];
+ xen_vcpu_setup(cpu);
if (xen_have_vector_callback)
xen_init_lock_cpu(cpu);
break;
xen_hvm_smp_init();
register_cpu_notifier(&xen_hvm_cpu_notifier);
xen_unplug_emulated_devices();
- have_vcpu_info_placement = 0;
x86_init.irqs.intr_init = xen_init_IRQ;
xen_hvm_init_time_ops();
xen_hvm_init_mmu_ops();
if (shared == NULL) {
struct vm_struct *area =
- alloc_vm_area(PAGE_SIZE * max_nr_gframes);
+ alloc_vm_area(PAGE_SIZE * max_nr_gframes, NULL);
BUG_ON(area == NULL);
shared = area->addr;
*__shared = shared;
*/
if (list_empty(&plug->list))
trace_block_plug(q);
- else if (!plug->should_sort) {
- struct request *__rq;
+ else {
+ if (!plug->should_sort) {
+ struct request *__rq;
- __rq = list_entry_rq(plug->list.prev);
- if (__rq->q != q)
- plug->should_sort = 1;
+ __rq = list_entry_rq(plug->list.prev);
+ if (__rq->q != q)
+ plug->should_sort = 1;
+ }
+ if (request_count >= BLK_MAX_REQUEST_COUNT) {
+ blk_flush_plug_list(plug, false);
+ trace_block_plug(q);
+ }
}
- if (request_count >= BLK_MAX_REQUEST_COUNT)
- blk_flush_plug_list(plug, false);
list_add_tail(&req->queuelist, &plug->list);
drive_stat_acct(req, 1);
} else {
if (!iov[i].iov_len)
return -EINVAL;
- if (uaddr & queue_dma_alignment(q)) {
+ /*
+ * Keep going so we check length of all segments
+ */
+ if (uaddr & queue_dma_alignment(q))
unaligned = 1;
- break;
- }
}
if (unaligned || (q->dma_pad_mask & len) || map_data)
#include <linux/mutex.h>
#include <linux/idr.h>
#include <linux/log2.h>
-#include <linux/ctype.h>
#include "blk.h"
subsys_initcall(genhd_device_init);
-static ssize_t alias_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct gendisk *disk = dev_to_disk(dev);
- ssize_t ret = 0;
-
- if (disk->alias)
- ret = snprintf(buf, ALIAS_LEN, "%s\n", disk->alias);
- return ret;
-}
-
-static ssize_t alias_store(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct gendisk *disk = dev_to_disk(dev);
- char *alias;
- char *envp[] = { NULL, NULL };
- unsigned char c;
- int i;
- ssize_t ret = count;
-
- if (!count)
- return -EINVAL;
-
- if (count >= ALIAS_LEN) {
- printk(KERN_ERR "alias: alias is too long\n");
- return -EINVAL;
- }
-
- /* Validation check */
- for (i = 0; i < count; i++) {
- c = buf[i];
- if (i == count - 1 && c == '\n')
- break;
- if (!isalnum(c) && c != '_' && c != '-') {
- printk(KERN_ERR "alias: invalid alias\n");
- return -EINVAL;
- }
- }
-
- if (disk->alias) {
- printk(KERN_INFO "alias: %s is already assigned (%s)\n",
- disk->disk_name, disk->alias);
- return -EINVAL;
- }
-
- alias = kasprintf(GFP_KERNEL, "%s", buf);
- if (!alias)
- return -ENOMEM;
-
- if (alias[count - 1] == '\n')
- alias[count - 1] = '\0';
-
- envp[0] = kasprintf(GFP_KERNEL, "ALIAS=%s", alias);
- if (!envp[0]) {
- kfree(alias);
- return -ENOMEM;
- }
-
- disk->alias = alias;
- printk(KERN_INFO "alias: assigned %s to %s\n", alias, disk->disk_name);
-
- kobject_uevent_env(&dev->kobj, KOBJ_ADD, envp);
-
- kfree(envp[0]);
- return ret;
-}
-
static ssize_t disk_range_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
return sprintf(buf, "%d\n", queue_discard_alignment(disk->queue));
}
-static DEVICE_ATTR(alias, S_IRUGO|S_IWUSR, alias_show, alias_store);
static DEVICE_ATTR(range, S_IRUGO, disk_range_show, NULL);
static DEVICE_ATTR(ext_range, S_IRUGO, disk_ext_range_show, NULL);
static DEVICE_ATTR(removable, S_IRUGO, disk_removable_show, NULL);
#endif
static struct attribute *disk_attrs[] = {
- &dev_attr_alias.attr,
&dev_attr_range.attr,
&dev_attr_ext_range.attr,
&dev_attr_removable.attr,
return 0;
}
+#ifdef CONFIG_NET
static int crypto_ablkcipher_report(struct sk_buff *skb, struct crypto_alg *alg)
{
struct crypto_report_blkcipher rblkcipher;
nla_put_failure:
return -EMSGSIZE;
}
+#else
+static int crypto_ablkcipher_report(struct sk_buff *skb, struct crypto_alg *alg)
+{
+ return -ENOSYS;
+}
+#endif
static void crypto_ablkcipher_show(struct seq_file *m, struct crypto_alg *alg)
__attribute__ ((unused));
return 0;
}
+#ifdef CONFIG_NET
static int crypto_givcipher_report(struct sk_buff *skb, struct crypto_alg *alg)
{
struct crypto_report_blkcipher rblkcipher;
nla_put_failure:
return -EMSGSIZE;
}
+#else
+static int crypto_givcipher_report(struct sk_buff *skb, struct crypto_alg *alg)
+{
+ return -ENOSYS;
+}
+#endif
static void crypto_givcipher_show(struct seq_file *m, struct crypto_alg *alg)
__attribute__ ((unused));
return 0;
}
+#ifdef CONFIG_NET
static int crypto_aead_report(struct sk_buff *skb, struct crypto_alg *alg)
{
struct crypto_report_aead raead;
nla_put_failure:
return -EMSGSIZE;
}
+#else
+static int crypto_aead_report(struct sk_buff *skb, struct crypto_alg *alg)
+{
+ return -ENOSYS;
+}
+#endif
static void crypto_aead_show(struct seq_file *m, struct crypto_alg *alg)
__attribute__ ((unused));
return 0;
}
+#ifdef CONFIG_NET
static int crypto_nivaead_report(struct sk_buff *skb, struct crypto_alg *alg)
{
struct crypto_report_aead raead;
nla_put_failure:
return -EMSGSIZE;
}
+#else
+static int crypto_nivaead_report(struct sk_buff *skb, struct crypto_alg *alg)
+{
+ return -ENOSYS;
+}
+#endif
static void crypto_nivaead_show(struct seq_file *m, struct crypto_alg *alg)
return sizeof(struct crypto_shash *);
}
+#ifdef CONFIG_NET
static int crypto_ahash_report(struct sk_buff *skb, struct crypto_alg *alg)
{
struct crypto_report_hash rhash;
nla_put_failure:
return -EMSGSIZE;
}
+#else
+static int crypto_ahash_report(struct sk_buff *skb, struct crypto_alg *alg)
+{
+ return -ENOSYS;
+}
+#endif
static void crypto_ahash_show(struct seq_file *m, struct crypto_alg *alg)
__attribute__ ((unused));
return crypto_init_blkcipher_ops_async(tfm);
}
+#ifdef CONFIG_NET
static int crypto_blkcipher_report(struct sk_buff *skb, struct crypto_alg *alg)
{
struct crypto_report_blkcipher rblkcipher;
nla_put_failure:
return -EMSGSIZE;
}
+#else
+static int crypto_blkcipher_report(struct sk_buff *skb, struct crypto_alg *alg)
+{
+ return -ENOSYS;
+}
+#endif
static void crypto_blkcipher_show(struct seq_file *m, struct crypto_alg *alg)
__attribute__ ((unused));
down_read(&crypto_alg_sem);
- if (list_empty(&crypto_alg_list))
- return NULL;
-
list_for_each_entry(q, &crypto_alg_list, cra_list) {
int match = 0;
return 0;
}
+#ifdef CONFIG_NET
static int crypto_pcomp_report(struct sk_buff *skb, struct crypto_alg *alg)
{
struct crypto_report_comp rpcomp;
nla_put_failure:
return -EMSGSIZE;
}
+#else
+static int crypto_pcomp_report(struct sk_buff *skb, struct crypto_alg *alg)
+{
+ return -ENOSYS;
+}
+#endif
static void crypto_pcomp_show(struct seq_file *m, struct crypto_alg *alg)
__attribute__ ((unused));
return 0;
}
+#ifdef CONFIG_NET
static int crypto_rng_report(struct sk_buff *skb, struct crypto_alg *alg)
{
struct crypto_report_rng rrng;
nla_put_failure:
return -EMSGSIZE;
}
+#else
+static int crypto_rng_report(struct sk_buff *skb, struct crypto_alg *alg)
+{
+ return -ENOSYS;
+}
+#endif
static void crypto_rng_show(struct seq_file *m, struct crypto_alg *alg)
__attribute__ ((unused));
return alg->cra_ctxsize;
}
+#ifdef CONFIG_NET
static int crypto_shash_report(struct sk_buff *skb, struct crypto_alg *alg)
{
struct crypto_report_hash rhash;
nla_put_failure:
return -EMSGSIZE;
}
+#else
+static int crypto_shash_report(struct sk_buff *skb, struct crypto_alg *alg)
+{
+ return -ENOSYS;
+}
+#endif
static void crypto_shash_show(struct seq_file *m, struct crypto_alg *alg)
__attribute__ ((unused));
/*
* Suspend / resume control
*/
-static int acpi_idle_suspend;
static u32 saved_bm_rld;
static void acpi_idle_bm_rld_save(void)
int acpi_processor_suspend(struct acpi_device * device, pm_message_t state)
{
- if (acpi_idle_suspend == 1)
- return 0;
-
acpi_idle_bm_rld_save();
- acpi_idle_suspend = 1;
return 0;
}
int acpi_processor_resume(struct acpi_device * device)
{
- if (acpi_idle_suspend == 0)
- return 0;
-
acpi_idle_bm_rld_restore();
- acpi_idle_suspend = 0;
return 0;
}
local_irq_disable();
- /* Do not access any ACPI IO ports in suspend path */
- if (acpi_idle_suspend) {
- local_irq_enable();
- cpu_relax();
- return -EINVAL;
- }
-
lapic_timer_state_broadcast(pr, cx, 1);
kt1 = ktime_get_real();
acpi_idle_do_entry(cx);
local_irq_disable();
- if (acpi_idle_suspend) {
- local_irq_enable();
- cpu_relax();
- return -EINVAL;
- }
-
-
if (cx->entry_method != ACPI_CSTATE_FFH) {
current_thread_info()->status &= ~TS_POLLING;
/*
if (unlikely(!pr))
return -EINVAL;
-
- if (acpi_idle_suspend) {
- cpu_relax();
- return -EINVAL;
- }
-
if (!cx->bm_sts_skip && acpi_idle_bm_check()) {
if (drv->safe_state_index >= 0) {
return drv->states[drv->safe_state_index].enter(dev,
/* Promise */
{ PCI_VDEVICE(PROMISE, 0x3f20), board_ahci }, /* PDC42819 */
+ /* Asmedia */
+ { PCI_VDEVICE(ASMEDIA, 0x0612), board_ahci }, /* ASM1061 */
+
/* Generic, PCI class code for AHCI */
{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci },
static int __init ahci_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
- struct ahci_platform_data *pdata = dev->platform_data;
+ struct ahci_platform_data *pdata = dev_get_platdata(dev);
const struct platform_device_id *id = platform_get_device_id(pdev);
struct ata_port_info pi = ahci_port_info[id->driver_data];
const struct ata_port_info *ppi[] = { &pi, NULL };
static int __devexit ahci_remove(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
- struct ahci_platform_data *pdata = dev->platform_data;
+ struct ahci_platform_data *pdata = dev_get_platdata(dev);
struct ata_host *host = dev_get_drvdata(dev);
ata_host_detach(host);
sata_scr_read(link, SCR_STATUS, &sstatus))
rc = -ERESTART;
- if (rc == -ERESTART || try >= max_tries) {
+ if (try >= max_tries) {
/*
* Thaw host port even if reset failed, so that the port
* can be retried on the next phy event. This risks
ata_eh_acquire(ap);
}
+ /*
+ * While disks spinup behind PMP, some controllers fail sending SRST.
+ * They need to be reset - as well as the PMP - before retrying.
+ */
+ if (rc == -ERESTART) {
+ if (ata_is_host_link(link))
+ ata_eh_thaw_port(ap);
+ goto out;
+ }
+
if (try == max_tries - 1) {
sata_down_spd_limit(link, 0);
if (slave)
/* link reports offline after LPM */
link->flags |= ATA_LFLAG_NO_LPM;
- /* Class code report is unreliable and SRST
- * times out under certain configurations.
- */
+ /* Class code report is unreliable. */
if (link->pmp < 5)
- link->flags |= ATA_LFLAG_NO_SRST |
- ATA_LFLAG_ASSUME_ATA;
+ link->flags |= ATA_LFLAG_ASSUME_ATA;
/* port 5 is for SEMB device and it doesn't like SRST */
if (link->pmp == 5)
/**
* __ata_change_queue_depth - helper for ata_scsi_change_queue_depth
+ * @ap: ATA port to which the device change the queue depth
+ * @sdev: SCSI device to configure queue depth for
+ * @queue_depth: new queue depth
+ * @reason: calling context
*
* libsas and libata have different approaches for associating a sdev to
* its ata_port.
}
ret = of_irq_to_resource(dn, 0, &irq_res);
- if (ret == NO_IRQ)
+ if (!ret)
irq_res.start = irq_res.end = 0;
else
irq_res.flags = 0;
};
MODULE_AUTHOR("Uwe Koziolek");
-MODULE_DESCRIPTION("low-level driver for Silicon Integratad Systems SATA controller");
+MODULE_DESCRIPTION("low-level driver for Silicon Integrated Systems SATA controller");
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, sis_pci_tbl);
MODULE_VERSION(DRV_VERSION);
#include <linux/kallsyms.h>
#include <linux/mutex.h>
#include <linux/async.h>
+#include <linux/pm_runtime.h>
#include "base.h"
#include "power/power.h"
*/
list_del_init(&dev->kobj.entry);
spin_unlock(&devices_kset->list_lock);
+ /* Disable all device's runtime power management */
+ pm_runtime_disable(dev);
if (dev->bus && dev->bus->shutdown) {
dev_dbg(dev, "shutdown\n");
nid, K(node_page_state(nid, NR_WRITEBACK)),
nid, K(node_page_state(nid, NR_FILE_PAGES)),
nid, K(node_page_state(nid, NR_FILE_MAPPED)),
- nid, K(node_page_state(nid, NR_ANON_PAGES)
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+ nid, K(node_page_state(nid, NR_ANON_PAGES)
+ node_page_state(nid, NR_ANON_TRANSPARENT_HUGEPAGES) *
- HPAGE_PMD_NR
+ HPAGE_PMD_NR),
+#else
+ nid, K(node_page_state(nid, NR_ANON_PAGES)),
#endif
- ),
nid, K(node_page_state(nid, NR_SHMEM)),
nid, node_page_state(nid, NR_KERNEL_STACK) *
THREAD_SIZE / 1024,
nid, K(node_page_state(nid, NR_SLAB_RECLAIMABLE) +
node_page_state(nid, NR_SLAB_UNRECLAIMABLE)),
nid, K(node_page_state(nid, NR_SLAB_RECLAIMABLE)),
- nid, K(node_page_state(nid, NR_SLAB_UNRECLAIMABLE))
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+ nid, K(node_page_state(nid, NR_SLAB_UNRECLAIMABLE))
, nid,
K(node_page_state(nid, NR_ANON_TRANSPARENT_HUGEPAGES) *
- HPAGE_PMD_NR)
+ HPAGE_PMD_NR));
+#else
+ nid, K(node_page_state(nid, NR_SLAB_UNRECLAIMABLE)));
#endif
- );
n += hugetlb_report_node_meminfo(nid, buf + n);
return n;
}
list_for_each_entry_reverse(ce, &psd->clock_list, node) {
if (ce->status < PCE_STATUS_ERROR) {
- clk_disable(ce->clk);
+ if (ce->status == PCE_STATUS_ENABLED)
+ clk_disable(ce->clk);
ce->status = PCE_STATUS_ACQUIRED;
}
}
End:
if (!error) {
dev->power.is_suspended = true;
- if (dev->power.wakeup_path && dev->parent)
+ if (dev->power.wakeup_path
+ && dev->parent && !dev->parent->power.ignore_children)
dev->parent->power.wakeup_path = true;
}
struct device_opp *dev_opp = find_device_opp(dev);
if (IS_ERR(dev_opp))
- return ERR_PTR(PTR_ERR(dev_opp)); /* matching type */
+ return ERR_CAST(dev_opp); /* matching type */
return &dev_opp->head;
}
if (!dev || !req) /*guard against callers passing in null */
return -EINVAL;
- if (dev_pm_qos_request_active(req)) {
- WARN(1, KERN_ERR "dev_pm_qos_add_request() called for already "
- "added request\n");
+ if (WARN(dev_pm_qos_request_active(req),
+ "%s() called for already added request\n", __func__))
return -EINVAL;
- }
req->dev = dev;
if (!req) /*guard against callers passing in null */
return -EINVAL;
- if (!dev_pm_qos_request_active(req)) {
- WARN(1, KERN_ERR "dev_pm_qos_update_request() called for "
- "unknown object\n");
+ if (WARN(!dev_pm_qos_request_active(req),
+ "%s() called for unknown object\n", __func__))
return -EINVAL;
- }
mutex_lock(&dev_pm_qos_mtx);
if (!req) /*guard against callers passing in null */
return -EINVAL;
- if (!dev_pm_qos_request_active(req)) {
- WARN(1, KERN_ERR "dev_pm_qos_remove_request() called for "
- "unknown object\n");
+ if (WARN(!dev_pm_qos_request_active(req),
+ "%s() called for unknown object\n", __func__))
return -EINVAL;
- }
mutex_lock(&dev_pm_qos_mtx);
#include <linux/interrupt.h>
#include <linux/types.h>
#include <linux/pci.h>
+#include <linux/pci-aspm.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/delay.h>
dev_warn(&h->pdev->dev, "controller appears to be disabled\n");
return -ENODEV;
}
+
+ pci_disable_link_state(h->pdev, PCIE_LINK_STATE_L0S |
+ PCIE_LINK_STATE_L1 | PCIE_LINK_STATE_CLKPM);
+
err = pci_enable_device(h->pdev);
if (err) {
dev_warn(&h->pdev->dev, "Unable to Enable PCI device\n");
h->cciss_max_sectors = 8192;
rebuild_lun_table(h, 1, 0);
+ cciss_engage_scsi(h);
h->busy_initializing = 0;
return 1;
/* If no tape support, then these become defined out of existence */
#define cciss_scsi_setup(cntl_num)
+#define cciss_engage_scsi(h)
#endif /* CONFIG_CISS_SCSI_TAPE */
&xor_funcs
};
-static loff_t get_loop_size(struct loop_device *lo, struct file *file)
+static loff_t get_size(loff_t offset, loff_t sizelimit, struct file *file)
{
- loff_t size, offset, loopsize;
+ loff_t size, loopsize;
/* Compute loopsize in bytes */
size = i_size_read(file->f_mapping->host);
- offset = lo->lo_offset;
loopsize = size - offset;
- if (lo->lo_sizelimit > 0 && lo->lo_sizelimit < loopsize)
- loopsize = lo->lo_sizelimit;
+ /* offset is beyond i_size, wierd but possible */
+ if (loopsize < 0)
+ return 0;
+ if (sizelimit > 0 && sizelimit < loopsize)
+ loopsize = sizelimit;
/*
* Unfortunately, if we want to do I/O on the device,
* the number of 512-byte sectors has to fit into a sector_t.
return loopsize >> 9;
}
+static loff_t get_loop_size(struct loop_device *lo, struct file *file)
+{
+ return get_size(lo->lo_offset, lo->lo_sizelimit, file);
+}
+
static int
-figure_loop_size(struct loop_device *lo)
+figure_loop_size(struct loop_device *lo, loff_t offset, loff_t sizelimit)
{
- loff_t size = get_loop_size(lo, lo->lo_backing_file);
+ loff_t size = get_size(offset, sizelimit, lo->lo_backing_file);
sector_t x = (sector_t)size;
if (unlikely((loff_t)x != size))
return -EFBIG;
-
+ if (lo->lo_offset != offset)
+ lo->lo_offset = offset;
+ if (lo->lo_sizelimit != sizelimit)
+ lo->lo_sizelimit = sizelimit;
set_capacity(lo->lo_disk, x);
- return 0;
+ return 0;
}
static inline int
if (retval < 0)
return retval;
-
+ if (retval != bvec->bv_len)
+ return -EIO;
return 0;
}
if (lo->lo_offset != info->lo_offset ||
lo->lo_sizelimit != info->lo_sizelimit) {
- lo->lo_offset = info->lo_offset;
- lo->lo_sizelimit = info->lo_sizelimit;
- if (figure_loop_size(lo))
+ if (figure_loop_size(lo, info->lo_offset, info->lo_sizelimit))
return -EFBIG;
}
loop_config_discard(lo);
err = -ENXIO;
if (unlikely(lo->lo_state != Lo_bound))
goto out;
- err = figure_loop_size(lo);
+ err = figure_loop_size(lo, lo->lo_offset, lo->lo_sizelimit);
if (unlikely(err))
goto out;
sec = get_capacity(lo->lo_disk);
goto out_unlocked;
break;
case LOOP_SET_STATUS:
- err = loop_set_status_old(lo, (struct loop_info __user *) arg);
+ err = -EPERM;
+ if ((mode & FMODE_WRITE) || capable(CAP_SYS_ADMIN))
+ err = loop_set_status_old(lo,
+ (struct loop_info __user *)arg);
break;
case LOOP_GET_STATUS:
err = loop_get_status_old(lo, (struct loop_info __user *) arg);
break;
case LOOP_SET_STATUS64:
- err = loop_set_status64(lo, (struct loop_info64 __user *) arg);
+ err = -EPERM;
+ if ((mode & FMODE_WRITE) || capable(CAP_SYS_ADMIN))
+ err = loop_set_status64(lo,
+ (struct loop_info64 __user *) arg);
break;
case LOOP_GET_STATUS64:
err = loop_get_status64(lo, (struct loop_info64 __user *) arg);
if (dev->status & 0x10)
return -ETIME;
+ memset(&hdr, 0, sizeof(hdr));
hdr.magic = PG_MAGIC;
hdr.dlen = dev->dlen;
copy = 0;
/* Canyon CN-BTU1 with HID interfaces */
{ USB_DEVICE(0x0c10, 0x0000) },
+ /* Broadcom BCM20702A0 */
+ { USB_DEVICE(0x413c, 0x8197) },
+
{ } /* Terminating entry */
};
/* Certain Gen5 chipsets require require idling the GPU before
* unmapping anything from the GTT when VT-d is enabled.
*/
-extern int intel_iommu_gfx_mapped;
static inline int needs_idle_maps(void)
{
+#ifdef CONFIG_INTEL_IOMMU
const unsigned short gpu_devid = intel_private.pcidev->device;
+ extern int intel_iommu_gfx_mapped;
/* Query intel_iommu to see if we need the workaround. Presumably that
* was loaded first.
gpu_devid == PCI_DEVICE_ID_INTEL_IRONLAKE_M_IG) &&
intel_iommu_gfx_mapped)
return 1;
-
+#endif
return 0;
}
intel_private.gtt_bus_addr = reg_addr + gtt_offset;
}
- if (needs_idle_maps());
+ if (needs_idle_maps())
intel_private.base.do_idle_maps = 1;
intel_i9xx_setup_flush();
if (!arch_get_random_long(&v))
break;
- memcpy(buf, &v, chunk);
+ memcpy(p, &v, chunk);
p += chunk;
nbytes -= chunk;
}
static int __cpuinit db8500_cpufreq_init(struct cpufreq_policy *policy)
{
- int res;
+ int i, res;
BUILD_BUG_ON(ARRAY_SIZE(idx2opp) + 1 != ARRAY_SIZE(freq_table));
freq_table[3].frequency = 1000000;
}
pr_info("db8500-cpufreq : Available frequencies:\n");
- while (freq_table[i].frequency != CPUFREQ_TABLE_END)
- pr_info(" %d Mhz\n", freq_table[i++].frequency/1000);
+ for (i = 0; freq_table[i].frequency != CPUFREQ_TABLE_END; i++)
+ pr_info(" %d Mhz\n", freq_table[i].frequency/1000);
/* get policy fields based on the table */
res = cpufreq_frequency_table_cpuinfo(policy, freq_table);
-config ARCH_HAS_DEVFREQ
- bool
- depends on ARCH_HAS_OPP
- help
- Denotes that the architecture supports DEVFREQ. If the architecture
- supports multiple OPP entries per device and the frequency of the
- devices with OPPs may be altered dynamically, the architecture
- supports DEVFREQ.
-
menuconfig PM_DEVFREQ
bool "Generic Dynamic Voltage and Frequency Scaling (DVFS) support"
- depends on PM_OPP && ARCH_HAS_DEVFREQ
help
- With OPP support, a device may have a list of frequencies and
- voltages available. DEVFREQ, a generic DVFS framework can be
- registered for a device with OPP support in order to let the
- governor provided to DEVFREQ choose an operating frequency
- based on the OPP's list and the policy given with DEVFREQ.
+ A device may have a list of frequencies and voltages available.
+ devfreq, a generic DVFS framework can be registered for a device
+ in order to let the governor provided to devfreq choose an
+ operating frequency based on the device driver's policy.
- Each device may have its own governor and policy. DEVFREQ can
+ Each device may have its own governor and policy. Devfreq can
reevaluate the device state periodically and/or based on the
- OPP list changes (each frequency/voltage pair in OPP may be
- disabled or enabled).
+ notification to "nb", a notifier block, of devfreq.
- Like some CPUs with CPUFREQ, a device may have multiple clocks.
+ Like some CPUs with CPUfreq, a device may have multiple clocks.
However, because the clock frequencies of a single device are
- determined by the single device's state, an instance of DEVFREQ
+ determined by the single device's state, an instance of devfreq
is attached to a single device and returns a "representative"
- clock frequency from the OPP of the device, which is also attached
- to a device by 1-to-1. The device registering DEVFREQ takes the
- responsiblity to "interpret" the frequency listed in OPP and
+ clock frequency of the device, which is also attached
+ to a device by 1-to-1. The device registering devfreq takes the
+ responsiblity to "interpret" the representative frequency and
to set its every clock accordingly with the "target" callback
- given to DEVFREQ.
+ given to devfreq.
+
+ When OPP is used with the devfreq device, it is recommended to
+ register devfreq's nb to the OPP's notifier head. If OPP is
+ used with the devfreq device, you may use OPP helper
+ functions defined in devfreq.h.
if PM_DEVFREQ
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/init.h>
+#include <linux/module.h>
#include <linux/slab.h>
+#include <linux/stat.h>
#include <linux/opp.h>
#include <linux/devfreq.h>
#include <linux/workqueue.h>
*/
int devfreq_remove_device(struct devfreq *devfreq)
{
+ bool central_polling;
+
if (!devfreq)
return -EINVAL;
- if (!devfreq->governor->no_central_polling) {
+ central_polling = !devfreq->governor->no_central_polling;
+
+ if (central_polling) {
mutex_lock(&devfreq_list_lock);
while (wait_remove_device == devfreq) {
mutex_unlock(&devfreq_list_lock);
mutex_lock(&devfreq->lock);
_remove_devfreq(devfreq, false); /* it unlocks devfreq->lock */
- if (!devfreq->governor->no_central_polling)
+ if (central_polling)
mutex_unlock(&devfreq_list_lock);
return 0;
}
/**
- * dmi_name_in_vendors - Check if string is anywhere in the DMI vendor information.
+ * dmi_name_in_vendors - Check if string is in the DMI system or board vendor name
* @str: Case sensitive Name
*/
int dmi_name_in_vendors(const char *str)
{
- static int fields[] = { DMI_BIOS_VENDOR, DMI_BIOS_VERSION, DMI_SYS_VENDOR,
- DMI_PRODUCT_NAME, DMI_PRODUCT_VERSION, DMI_BOARD_VENDOR,
- DMI_BOARD_NAME, DMI_BOARD_VERSION, DMI_NONE };
+ static int fields[] = { DMI_SYS_VENDOR, DMI_BOARD_VENDOR, DMI_NONE };
int i;
for (i = 0; fields[i] != DMI_NONE; i++) {
int f = fields[i];
return (__raw_readl(reg) & GPIO_BIT(bank, gpio)) != 0;
}
-#define MOD_REG_BIT(reg, bit_mask, set) \
-do { \
- int l = __raw_readl(base + reg); \
- if (set) l |= bit_mask; \
- else l &= ~bit_mask; \
- __raw_writel(l, base + reg); \
-} while(0)
+static inline void _gpio_rmw(void __iomem *base, u32 reg, u32 mask, bool set)
+{
+ int l = __raw_readl(base + reg);
+
+ if (set)
+ l |= mask;
+ else
+ l &= ~mask;
+
+ __raw_writel(l, base + reg);
+}
/**
* _set_gpio_debounce - low level gpio debounce time
u32 gpio_bit = 1 << gpio;
if (cpu_is_omap44xx()) {
- MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT0, gpio_bit,
- trigger & IRQ_TYPE_LEVEL_LOW);
- MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT1, gpio_bit,
- trigger & IRQ_TYPE_LEVEL_HIGH);
- MOD_REG_BIT(OMAP4_GPIO_RISINGDETECT, gpio_bit,
- trigger & IRQ_TYPE_EDGE_RISING);
- MOD_REG_BIT(OMAP4_GPIO_FALLINGDETECT, gpio_bit,
- trigger & IRQ_TYPE_EDGE_FALLING);
+ _gpio_rmw(base, OMAP4_GPIO_LEVELDETECT0, gpio_bit,
+ trigger & IRQ_TYPE_LEVEL_LOW);
+ _gpio_rmw(base, OMAP4_GPIO_LEVELDETECT1, gpio_bit,
+ trigger & IRQ_TYPE_LEVEL_HIGH);
+ _gpio_rmw(base, OMAP4_GPIO_RISINGDETECT, gpio_bit,
+ trigger & IRQ_TYPE_EDGE_RISING);
+ _gpio_rmw(base, OMAP4_GPIO_FALLINGDETECT, gpio_bit,
+ trigger & IRQ_TYPE_EDGE_FALLING);
} else {
- MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit,
- trigger & IRQ_TYPE_LEVEL_LOW);
- MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT1, gpio_bit,
- trigger & IRQ_TYPE_LEVEL_HIGH);
- MOD_REG_BIT(OMAP24XX_GPIO_RISINGDETECT, gpio_bit,
- trigger & IRQ_TYPE_EDGE_RISING);
- MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit,
- trigger & IRQ_TYPE_EDGE_FALLING);
+ _gpio_rmw(base, OMAP24XX_GPIO_LEVELDETECT0, gpio_bit,
+ trigger & IRQ_TYPE_LEVEL_LOW);
+ _gpio_rmw(base, OMAP24XX_GPIO_LEVELDETECT1, gpio_bit,
+ trigger & IRQ_TYPE_LEVEL_HIGH);
+ _gpio_rmw(base, OMAP24XX_GPIO_RISINGDETECT, gpio_bit,
+ trigger & IRQ_TYPE_EDGE_RISING);
+ _gpio_rmw(base, OMAP24XX_GPIO_FALLINGDETECT, gpio_bit,
+ trigger & IRQ_TYPE_EDGE_FALLING);
}
if (likely(!(bank->non_wakeup_gpios & gpio_bit))) {
if (cpu_is_omap44xx()) {
- MOD_REG_BIT(OMAP4_GPIO_IRQWAKEN0, gpio_bit,
- trigger != 0);
+ _gpio_rmw(base, OMAP4_GPIO_IRQWAKEN0, gpio_bit,
+ trigger != 0);
} else {
/*
* GPIO wakeup request can only be generated on edge
gc = irq_alloc_generic_chip("MPUIO", 1, irq_start, bank->base,
handle_simple_irq);
+ if (!gc) {
+ dev_err(bank->dev, "Memory alloc failed for gc\n");
+ return;
+ }
+
ct = gc->chip_types;
/* NOTE: No ack required, reading IRQ status clears it. */
/* set platform specific polarity inversion */
ret = pca953x_write_reg(chip, PCA953X_INVERT, invert);
- if (ret)
- goto out;
- return 0;
out:
return ret;
}
struct pca953x_platform_data *pdata;
struct pca953x_chip *chip;
int irq_base=0, invert=0;
- int ret = 0;
+ int ret;
chip = kzalloc(sizeof(struct pca953x_chip), GFP_KERNEL);
if (chip == NULL)
pca953x_setup_gpio(chip, id->driver_data & PCA_GPIO_MASK);
if (chip->chip_type == PCA953X_TYPE)
- device_pca953x_init(chip, invert);
- else if (chip->chip_type == PCA957X_TYPE)
- device_pca957x_init(chip, invert);
+ ret = device_pca953x_init(chip, invert);
else
+ ret = device_pca957x_init(chip, invert);
+ if (ret)
goto out_failed;
ret = pca953x_irq_setup(chip, id, irq_base);
depends on (AGP || AGP=n) && !EMULATED_CMPXCHG && MMU
select I2C
select I2C_ALGOBIT
- select SLOW_WORK
help
Kernel-level support for the Direct Rendering Infrastructure (DRI)
introduced in XFree86 4.0. If you say Y here, you need to select
select FB_CFB_IMAGEBLIT
# i915 depends on ACPI_VIDEO when ACPI is enabled
# but for select to work, need to select ACPI_VIDEO's dependencies, ick
+ select BACKLIGHT_LCD_SUPPORT if ACPI
select BACKLIGHT_CLASS_DEVICE if ACPI
select VIDEO_OUTPUT_CONTROL if ACPI
select INPUT if ACPI
property->num_values = num_values;
INIT_LIST_HEAD(&property->enum_blob_list);
- if (name)
+ if (name) {
strncpy(property->name, name, DRM_PROP_NAME_LEN);
+ property->name[DRM_PROP_NAME_LEN-1] = '\0';
+ }
list_add_tail(&property->head, &dev->mode_config.property_list);
return property;
struct drm_connector *save_connectors, *connector;
int count = 0, ro, fail = 0;
struct drm_crtc_helper_funcs *crtc_funcs;
+ struct drm_mode_set save_set;
int ret = 0;
int i;
save_connectors[count++] = *connector;
}
+ save_set.crtc = set->crtc;
+ save_set.mode = &set->crtc->mode;
+ save_set.x = set->crtc->x;
+ save_set.y = set->crtc->y;
+ save_set.fb = set->crtc->fb;
+
/* We should be able to check here if the fb has the same properties
* and then just flip_or_move it */
if (set->crtc->fb != set->fb) {
*connector = save_connectors[count++];
}
+ /* Try to restore the config */
+ if (mode_changed &&
+ !drm_crtc_helper_set_mode(save_set.crtc, save_set.mode, save_set.x,
+ save_set.y, save_set.fb))
+ DRM_ERROR("failed to restore config after modeset failure\n");
+
kfree(save_connectors);
kfree(save_encoders);
kfree(save_crtcs);
tmp->minor = minor;
tmp->dent = ent;
tmp->info_ent = &files[i];
- list_add(&(tmp->list), &(minor->debugfs_nodes.list));
+
+ mutex_lock(&minor->debugfs_lock);
+ list_add(&tmp->list, &minor->debugfs_list);
+ mutex_unlock(&minor->debugfs_lock);
}
return 0;
char name[64];
int ret;
- INIT_LIST_HEAD(&minor->debugfs_nodes.list);
+ INIT_LIST_HEAD(&minor->debugfs_list);
+ mutex_init(&minor->debugfs_lock);
sprintf(name, "%d", minor_id);
minor->debugfs_root = debugfs_create_dir(name, root);
if (!minor->debugfs_root) {
struct drm_info_node *tmp;
int i;
+ mutex_lock(&minor->debugfs_lock);
for (i = 0; i < count; i++) {
- list_for_each_safe(pos, q, &minor->debugfs_nodes.list) {
+ list_for_each_safe(pos, q, &minor->debugfs_list) {
tmp = list_entry(pos, struct drm_info_node, list);
if (tmp->info_ent == &files[i]) {
debugfs_remove(tmp->dent);
}
}
}
+ mutex_unlock(&minor->debugfs_lock);
return 0;
}
EXPORT_SYMBOL(drm_debugfs_remove_files);
DRM_IOCTL_DEF(DRM_IOCTL_SG_ALLOC, drm_sg_alloc_ioctl, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
DRM_IOCTL_DEF(DRM_IOCTL_SG_FREE, drm_sg_free, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
- DRM_IOCTL_DEF(DRM_IOCTL_WAIT_VBLANK, drm_wait_vblank, 0),
+ DRM_IOCTL_DEF(DRM_IOCTL_WAIT_VBLANK, drm_wait_vblank, DRM_UNLOCKED),
DRM_IOCTL_DEF(DRM_IOCTL_MODESET_CTL, drm_modeset_ctl, 0),
/* Prevent vblank irq processing while disabling vblank irqs,
* so no updates of timestamps or count can happen after we've
* disabled. Needed to prevent races in case of delayed irq's.
- * Disable preemption, so vblank_time_lock is held as short as
- * possible, even under a kernel with PREEMPT_RT patches.
*/
- preempt_disable();
spin_lock_irqsave(&dev->vblank_time_lock, irqflags);
dev->driver->disable_vblank(dev, crtc);
clear_vblank_timestamps(dev, crtc);
spin_unlock_irqrestore(&dev->vblank_time_lock, irqflags);
- preempt_enable();
}
static void vblank_disable_fn(unsigned long arg)
/*
* Wake up any waiters so they don't hang.
*/
- spin_lock_irqsave(&dev->vbl_lock, irqflags);
- for (i = 0; i < dev->num_crtcs; i++) {
- DRM_WAKEUP(&dev->vbl_queue[i]);
- dev->vblank_enabled[i] = 0;
- dev->last_vblank[i] = dev->driver->get_vblank_counter(dev, i);
+ if (dev->num_crtcs) {
+ spin_lock_irqsave(&dev->vbl_lock, irqflags);
+ for (i = 0; i < dev->num_crtcs; i++) {
+ DRM_WAKEUP(&dev->vbl_queue[i]);
+ dev->vblank_enabled[i] = 0;
+ dev->last_vblank[i] =
+ dev->driver->get_vblank_counter(dev, i);
+ }
+ spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
}
- spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
if (!irq_enabled)
return -EINVAL;
spin_lock_irqsave(&dev->vbl_lock, irqflags);
/* Going from 0->1 means we have to enable interrupts again */
if (atomic_add_return(1, &dev->vblank_refcount[crtc]) == 1) {
- /* Disable preemption while holding vblank_time_lock. Do
- * it explicitely to guard against PREEMPT_RT kernel.
- */
- preempt_disable();
spin_lock_irqsave(&dev->vblank_time_lock, irqflags2);
if (!dev->vblank_enabled[crtc]) {
/* Enable vblank irqs under vblank_time_lock protection.
}
}
spin_unlock_irqrestore(&dev->vblank_time_lock, irqflags2);
- preempt_enable();
} else {
if (!dev->vblank_enabled[crtc]) {
atomic_dec(&dev->vblank_refcount[crtc]);
trace_drm_vblank_event_delivered(current->pid, pipe,
vblwait->request.sequence);
} else {
+ /* drm_handle_vblank_events will call drm_vblank_put */
list_add_tail(&e->base.link, &dev->vblank_event_list);
vblwait->reply.sequence = vblwait->request.sequence;
}
goto done;
}
- if (flags & _DRM_VBLANK_EVENT)
+ if (flags & _DRM_VBLANK_EVENT) {
+ /* must hold on to the vblank ref until the event fires
+ * drm_vblank_put will be called asynchronously
+ */
return drm_queue_vblank_event(dev, crtc, vblwait, file_priv);
+ }
if ((flags & _DRM_VBLANK_NEXTONMISS) &&
(seq - vblwait->request.sequence) <= (1<<23)) {
node->minor = minor;
node->dent = ent;
node->info_ent = (void *) key;
- list_add(&node->list, &minor->debugfs_nodes.list);
+
+ mutex_lock(&minor->debugfs_lock);
+ list_add(&node->list, &minor->debugfs_list);
+ mutex_unlock(&minor->debugfs_lock);
return 0;
}
};
static struct drm_driver driver = {
- /* don't use mtrr's here, the Xserver or user space app should
- * deal with them for intel hardware.
+ /* Don't use MTRRs here; the Xserver or userspace app should
+ * deal with them for Intel hardware.
*/
.driver_features =
DRIVER_USE_AGP | DRIVER_REQUIRE_AGP | /* DRIVER_USE_MTRR |*/
if (obj->base.size > dev_priv->mm.gtt_mappable_end) {
ret = -E2BIG;
- goto unlock;
+ goto out;
}
if (obj->madv != I915_MADV_WILLNEED) {
nv50_pll_set(struct drm_device *dev, uint32_t reg, uint32_t clk)
{
struct drm_nouveau_private *dev_priv = dev->dev_private;
- uint32_t reg0 = nv_rd32(dev, reg + 0);
- uint32_t reg1 = nv_rd32(dev, reg + 4);
struct nouveau_pll_vals pll;
struct pll_lims pll_limits;
+ u32 ctrl, mask, coef;
int ret;
ret = get_pll_limits(dev, reg, &pll_limits);
if (!clk)
return -ERANGE;
- reg0 = (reg0 & 0xfff8ffff) | (pll.log2P << 16);
- reg1 = (reg1 & 0xffff0000) | (pll.N1 << 8) | pll.M1;
-
- if (dev_priv->vbios.execute) {
- still_alive();
- nv_wr32(dev, reg + 4, reg1);
- nv_wr32(dev, reg + 0, reg0);
+ coef = pll.N1 << 8 | pll.M1;
+ ctrl = pll.log2P << 16;
+ mask = 0x00070000;
+ if (reg == 0x004008) {
+ mask |= 0x01f80000;
+ ctrl |= (pll_limits.log2p_bias << 19);
+ ctrl |= (pll.log2P << 22);
}
+ if (!dev_priv->vbios.execute)
+ return 0;
+
+ nv_mask(dev, reg + 0, mask, ctrl);
+ nv_wr32(dev, reg + 4, coef);
return 0;
}
if (dev_priv->card_type == NV_10 &&
nvbo->tile_mode && (type & TTM_PL_FLAG_VRAM) &&
- nvbo->bo.mem.num_pages < vram_pages / 2) {
+ nvbo->bo.mem.num_pages < vram_pages / 4) {
/*
* Make sure that the color and depth buffers are handled
* by independent memory controller units. Up to a 9x
INIT_LIST_HEAD(&chan->nvsw.vbl_wait);
INIT_LIST_HEAD(&chan->nvsw.flip);
INIT_LIST_HEAD(&chan->fence.pending);
+ spin_lock_init(&chan->fence.lock);
/* setup channel's memory and vm */
ret = nouveau_gpuobj_channel_init(chan, vram_handle, gart_handle);
case OUTPUT_DP:
max_clock = nv_encoder->dp.link_nr;
max_clock *= nv_encoder->dp.link_bw;
- clock = clock * nouveau_connector_bpp(connector) / 8;
+ clock = clock * nouveau_connector_bpp(connector) / 10;
break;
default:
BUG_ON(1);
{
struct drm_nouveau_private *dev_priv = dev->dev_private;
struct nouveau_fbdev *nfbdev;
+ int preferred_bpp;
int ret;
nfbdev = kzalloc(sizeof(struct nouveau_fbdev), GFP_KERNEL);
}
drm_fb_helper_single_add_all_connectors(&nfbdev->helper);
- drm_fb_helper_initial_config(&nfbdev->helper, 32);
+
+ if (dev_priv->vram_size <= 32 * 1024 * 1024)
+ preferred_bpp = 8;
+ else if (dev_priv->vram_size <= 64 * 1024 * 1024)
+ preferred_bpp = 16;
+ else
+ preferred_bpp = 32;
+
+ drm_fb_helper_initial_config(&nfbdev->helper, preferred_bpp);
return 0;
}
return ret;
}
- INIT_LIST_HEAD(&chan->fence.pending);
- spin_lock_init(&chan->fence.lock);
atomic_set(&chan->fence.last_sequence_irq, 0);
return 0;
}
NV_DEBUG(dev, "Probing %ss on I2C bus: %d\n", what, index);
- for (i = 0; info[i].addr; i++) {
+ for (i = 0; i2c && info[i].addr; i++) {
if (nouveau_probe_i2c_addr(i2c, info[i].addr) &&
(!match || match(i2c, &info[i]))) {
NV_INFO(dev, "Detected %s: %s\n", what, info[i].type);
if(version == 0x15) {
memtimings->timing =
kcalloc(entries, sizeof(*memtimings->timing), GFP_KERNEL);
- if(!memtimings) {
+ if (!memtimings->timing) {
NV_WARN(dev,"Could not allocate memtiming table\n");
return;
}
if (ret)
goto out_display_early;
+ /* workaround an odd issue on nvc1 by disabling the device's
+ * nosnoop capability. hopefully won't cause issues until a
+ * better fix is found - assuming there is one...
+ */
+ if (dev_priv->chipset == 0xc1) {
+ nv_mask(dev, 0x00088080, 0x00000800, 0x00000000);
+ }
+
nouveau_pm_init(dev);
ret = engine->vram.init(dev);
dev_priv->noaccel = !!nouveau_noaccel;
if (nouveau_noaccel == -1) {
switch (dev_priv->chipset) {
- case 0xc1: /* known broken */
- case 0xc8: /* never tested */
+#if 0
+ case 0xXX: /* known broken */
NV_INFO(dev, "acceleration disabled by default, pass "
"noaccel=0 to force enable\n");
dev_priv->noaccel = true;
break;
+#endif
default:
dev_priv->noaccel = false;
break;
int P = (ctrl & 0x00070000) >> 16;
u32 ref = 27000, clk = 0;
- if (ctrl & 0x80000000)
+ if ((ctrl & 0x80000000) && M1) {
clk = ref * N1 / M1;
-
- if (!(ctrl & 0x00000100)) {
- if (ctrl & 0x40000000)
- clk = clk * N2 / M2;
+ if ((ctrl & 0x40000100) == 0x40000000) {
+ if (M2)
+ clk = clk * N2 / M2;
+ else
+ clk = 0;
+ }
}
return clk >> P;
}
/* memory clock */
+ if (!perflvl->memory) {
+ info->mpll_ctrl = 0x00000000;
+ goto out;
+ }
+
ret = nv40_calc_pll(dev, 0x004020, &pll, perflvl->memory,
&N1, &M1, &N2, &M2, &log2P);
if (ret < 0)
mdelay(5);
nv_mask(dev, 0x00c040, 0x00000333, info->ctrl);
+ if (!info->mpll_ctrl)
+ goto resume;
+
/* wait for vblank start on active crtcs, disable memory access */
for (i = 0; i < 2; i++) {
if (!(crtc_mask & (1 << i)))
NV_DEBUG(dev, "\n");
/* master reset */
- nv_mask(dev, 0x000200, 0x00200100, 0x00000000);
- nv_mask(dev, 0x000200, 0x00200100, 0x00200100);
+ nv_mask(dev, 0x000200, 0x00201000, 0x00000000);
+ nv_mask(dev, 0x000200, 0x00201000, 0x00201000);
nv_wr32(dev, 0x40008c, 0x00000004); /* HW_CTX_SWITCH_ENABLED */
/* reset/enable traps and interrupts */
gr_def(ctx, offset + 0x1c, 0x00880000);
break;
case 0x86:
- gr_def(ctx, offset + 0x1c, 0x008c0000);
+ gr_def(ctx, offset + 0x1c, 0x018c0000);
break;
case 0x92:
case 0x96:
colbits = (r4 & 0x0000f000) >> 12;
rowbitsa = ((r4 & 0x000f0000) >> 16) + 8;
rowbitsb = ((r4 & 0x00f00000) >> 20) + 8;
- banks = ((r4 & 0x01000000) ? 8 : 4);
+ banks = 1 << (((r4 & 0x03000000) >> 24) + 2);
rowsize = parts * banks * (1 << colbits) * 8;
predicted = rowsize << rowbitsa;
struct nvc0_graph_priv *priv = nv_engine(chan->dev, NVOBJ_ENGINE_GR);
struct nvc0_graph_chan *grch = chan->engctx[NVOBJ_ENGINE_GR];
struct drm_device *dev = chan->dev;
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
int i = 0, gpc, tp, ret;
- u32 magic;
ret = nouveau_gpuobj_new(dev, chan, 0x2000, 256, NVOBJ_FLAG_VM,
&grch->unk408004);
nv_wo32(grch->mmio, i++ * 4, 0x0041880c);
nv_wo32(grch->mmio, i++ * 4, 0x80000018);
- magic = 0x02180000;
- nv_wo32(grch->mmio, i++ * 4, 0x00405830);
- nv_wo32(grch->mmio, i++ * 4, magic);
- for (gpc = 0; gpc < priv->gpc_nr; gpc++) {
- for (tp = 0; tp < priv->tp_nr[gpc]; tp++, magic += 0x0324) {
- u32 reg = 0x504520 + (gpc * 0x8000) + (tp * 0x0800);
- nv_wo32(grch->mmio, i++ * 4, reg);
- nv_wo32(grch->mmio, i++ * 4, magic);
+ if (dev_priv->chipset != 0xc1) {
+ u32 magic = 0x02180000;
+ nv_wo32(grch->mmio, i++ * 4, 0x00405830);
+ nv_wo32(grch->mmio, i++ * 4, magic);
+ for (gpc = 0; gpc < priv->gpc_nr; gpc++) {
+ for (tp = 0; tp < priv->tp_nr[gpc]; tp++) {
+ u32 reg = TP_UNIT(gpc, tp, 0x520);
+ nv_wo32(grch->mmio, i++ * 4, reg);
+ nv_wo32(grch->mmio, i++ * 4, magic);
+ magic += 0x0324;
+ }
+ }
+ } else {
+ u32 magic = 0x02180000;
+ nv_wo32(grch->mmio, i++ * 4, 0x00405830);
+ nv_wo32(grch->mmio, i++ * 4, magic | 0x0000218);
+ nv_wo32(grch->mmio, i++ * 4, 0x004064c4);
+ nv_wo32(grch->mmio, i++ * 4, 0x0086ffff);
+ for (gpc = 0; gpc < priv->gpc_nr; gpc++) {
+ for (tp = 0; tp < priv->tp_nr[gpc]; tp++) {
+ u32 reg = TP_UNIT(gpc, tp, 0x520);
+ nv_wo32(grch->mmio, i++ * 4, reg);
+ nv_wo32(grch->mmio, i++ * 4, (1 << 28) | magic);
+ magic += 0x0324;
+ }
+ for (tp = 0; tp < priv->tp_nr[gpc]; tp++) {
+ u32 reg = TP_UNIT(gpc, tp, 0x544);
+ nv_wo32(grch->mmio, i++ * 4, reg);
+ nv_wo32(grch->mmio, i++ * 4, magic);
+ magic += 0x0324;
+ }
}
}
/* calculate first set of magics */
memcpy(tpnr, priv->tp_nr, sizeof(priv->tp_nr));
+ gpc = -1;
for (tp = 0; tp < priv->tp_total; tp++) {
do {
gpc = (gpc + 1) % priv->gpc_nr;
if (1) {
u32 tp_mask = 0, tp_set = 0;
- u8 tpnr[GPC_MAX];
+ u8 tpnr[GPC_MAX], a, b;
memcpy(tpnr, priv->tp_nr, sizeof(priv->tp_nr));
for (gpc = 0; gpc < priv->gpc_nr; gpc++)
tp_mask |= ((1 << priv->tp_nr[gpc]) - 1) << (gpc * 8);
- gpc = -1;
- for (i = 0, gpc = -1; i < 32; i++) {
- int ltp = i * (priv->tp_total - 1) / 32;
-
- do {
- gpc = (gpc + 1) % priv->gpc_nr;
- } while (!tpnr[gpc]);
- tp = priv->tp_nr[gpc] - tpnr[gpc]--;
+ for (i = 0, gpc = -1, b = -1; i < 32; i++) {
+ a = (i * (priv->tp_total - 1)) / 32;
+ if (a != b) {
+ b = a;
+ do {
+ gpc = (gpc + 1) % priv->gpc_nr;
+ } while (!tpnr[gpc]);
+ tp = priv->tp_nr[gpc] - tpnr[gpc]--;
- tp_set |= 1 << ((gpc * 8) + tp);
+ tp_set |= 1 << ((gpc * 8) + tp);
+ }
- do {
- nv_wr32(dev, 0x406800 + (i * 0x20), tp_set);
- tp_set ^= tp_mask;
- nv_wr32(dev, 0x406c00 + (i * 0x20), tp_set);
- tp_set ^= tp_mask;
- } while (ltp == (++i * (priv->tp_total - 1) / 32));
- i--;
+ nv_wr32(dev, 0x406800 + (i * 0x20), tp_set);
+ nv_wr32(dev, 0x406c00 + (i * 0x20), tp_set ^ tp_mask);
}
}
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 3, 3, 3, 3, 1, 1, 1, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 3,
- 3, 3, 3, 3, 0, 0, 0, 0, 0, 0, 0, 0, 3, 3, 3, 3,
+ 3, 3, 3, 1, 0, 0, 0, 0, 0, 0, 0, 0, 3, 3, 3, 3,
3, 3, 0, 0, 0, 0, 0, 0, 3, 0, 0, 3, 0, 3, 0, 3,
3, 0, 3, 3, 3, 3, 3, 0, 0, 3, 0, 3, 0, 3, 3, 0,
3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 0, 1, 1, 0
u32 bsize = nv_rd32(dev, 0x10f20c);
u32 offset, length;
bool uniform = true;
- int ret, i;
+ int ret, part;
NV_DEBUG(dev, "0x100800: 0x%08x\n", nv_rd32(dev, 0x100800));
NV_DEBUG(dev, "parts 0x%08x bcast_mem_amount 0x%08x\n", parts, bsize);
/* read amount of vram attached to each memory controller */
- for (i = 0; i < parts; i++) {
- u32 psize = nv_rd32(dev, 0x11020c + (i * 0x1000));
+ part = 0;
+ while (parts) {
+ u32 psize = nv_rd32(dev, 0x11020c + (part++ * 0x1000));
+ if (psize == 0)
+ continue;
+ parts--;
+
if (psize != bsize) {
if (psize < bsize)
bsize = psize;
uniform = false;
}
- NV_DEBUG(dev, "%d: mem_amount 0x%08x\n", i, psize);
-
+ NV_DEBUG(dev, "%d: mem_amount 0x%08x\n", part, psize);
dev_priv->vram_size += (u64)psize << 20;
}
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
- struct drm_device *dev = crtc->dev;
- struct radeon_device *rdev = dev->dev_private;
-
- /* adjust pm to upcoming mode change */
- radeon_pm_compute_clocks(rdev);
-
if (!radeon_crtc_scaling_mode_fixup(crtc, mode, adjusted_mode))
return false;
return true;
}
}
- DRM_ERROR("aux i2c too many retries, giving up\n");
+ DRM_DEBUG_KMS("aux i2c too many retries, giving up\n");
return -EREMOTEIO;
}
return actual_temp * 1000;
}
+void sumo_pm_init_profile(struct radeon_device *rdev)
+{
+ int idx;
+
+ /* default */
+ rdev->pm.profiles[PM_PROFILE_DEFAULT_IDX].dpms_off_ps_idx = rdev->pm.default_power_state_index;
+ rdev->pm.profiles[PM_PROFILE_DEFAULT_IDX].dpms_on_ps_idx = rdev->pm.default_power_state_index;
+ rdev->pm.profiles[PM_PROFILE_DEFAULT_IDX].dpms_off_cm_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_DEFAULT_IDX].dpms_on_cm_idx = 0;
+
+ /* low,mid sh/mh */
+ if (rdev->flags & RADEON_IS_MOBILITY)
+ idx = radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 0);
+ else
+ idx = radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0);
+
+ rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_ps_idx = idx;
+ rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx = idx;
+ rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_cm_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 0;
+
+ rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_ps_idx = idx;
+ rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_ps_idx = idx;
+ rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_cm_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 0;
+
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_ps_idx = idx;
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_ps_idx = idx;
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_cm_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_cm_idx = 0;
+
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_ps_idx = idx;
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_ps_idx = idx;
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_cm_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_cm_idx = 0;
+
+ /* high sh/mh */
+ idx = radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0);
+ rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_ps_idx = idx;
+ rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_ps_idx = idx;
+ rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_cm_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_cm_idx =
+ rdev->pm.power_state[idx].num_clock_modes - 1;
+
+ rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_ps_idx = idx;
+ rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_ps_idx = idx;
+ rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_cm_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_cm_idx =
+ rdev->pm.power_state[idx].num_clock_modes - 1;
+}
+
void evergreen_pm_misc(struct radeon_device *rdev)
{
int req_ps_idx = rdev->pm.requested_power_state_index;
WREG32(MC_VM_SYSTEM_APERTURE_HIGH_ADDR,
rdev->mc.vram_end >> 12);
}
- WREG32(MC_VM_SYSTEM_APERTURE_DEFAULT_ADDR, 0);
+ WREG32(MC_VM_SYSTEM_APERTURE_DEFAULT_ADDR, rdev->vram_scratch.gpu_addr >> 12);
if (rdev->flags & RADEON_IS_IGP) {
tmp = RREG32(MC_FUS_VM_FB_OFFSET) & 0x000FFFFF;
tmp |= ((rdev->mc.vram_end >> 20) & 0xF) << 24;
pcie_lanes);
}
-static int r600_pm_get_type_index(struct radeon_device *rdev,
- enum radeon_pm_state_type ps_type,
- int instance)
-{
- int i;
- int found_instance = -1;
-
- for (i = 0; i < rdev->pm.num_power_states; i++) {
- if (rdev->pm.power_state[i].type == ps_type) {
- found_instance++;
- if (found_instance == instance)
- return i;
- }
- }
- /* return default if no match */
- return rdev->pm.default_power_state_index;
-}
-
void rs780_pm_init_profile(struct radeon_device *rdev)
{
if (rdev->pm.num_power_states == 2) {
void r600_pm_init_profile(struct radeon_device *rdev)
{
+ int idx;
+
if (rdev->family == CHIP_R600) {
/* XXX */
/* default */
rdev->pm.profiles[PM_PROFILE_DEFAULT_IDX].dpms_off_cm_idx = 0;
rdev->pm.profiles[PM_PROFILE_DEFAULT_IDX].dpms_on_cm_idx = 2;
/* low sh */
- if (rdev->flags & RADEON_IS_MOBILITY) {
- rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_ps_idx =
- r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 0);
- rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx =
- r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 0);
- rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_cm_idx = 0;
- rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 0;
- } else {
- rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_ps_idx =
- r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0);
- rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx =
- r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0);
- rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_cm_idx = 0;
- rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 0;
- }
+ if (rdev->flags & RADEON_IS_MOBILITY)
+ idx = radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 0);
+ else
+ idx = radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0);
+ rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_ps_idx = idx;
+ rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx = idx;
+ rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_cm_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 0;
/* mid sh */
- if (rdev->flags & RADEON_IS_MOBILITY) {
- rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_ps_idx =
- r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 0);
- rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_ps_idx =
- r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 0);
- rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_cm_idx = 0;
- rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_cm_idx = 1;
- } else {
- rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_ps_idx =
- r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0);
- rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_ps_idx =
- r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0);
- rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_cm_idx = 0;
- rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_cm_idx = 1;
- }
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_ps_idx = idx;
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_ps_idx = idx;
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_cm_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_cm_idx = 1;
/* high sh */
- rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_ps_idx =
- r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0);
- rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_ps_idx =
- r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0);
+ idx = radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0);
+ rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_ps_idx = idx;
+ rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_ps_idx = idx;
rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_cm_idx = 0;
rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_cm_idx = 2;
/* low mh */
- if (rdev->flags & RADEON_IS_MOBILITY) {
- rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_ps_idx =
- r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 1);
- rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_ps_idx =
- r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 1);
- rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_cm_idx = 0;
- rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 0;
- } else {
- rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_ps_idx =
- r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1);
- rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_ps_idx =
- r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1);
- rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_cm_idx = 0;
- rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 0;
- }
+ if (rdev->flags & RADEON_IS_MOBILITY)
+ idx = radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 1);
+ else
+ idx = radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1);
+ rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_ps_idx = idx;
+ rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_ps_idx = idx;
+ rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_cm_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 0;
/* mid mh */
- if (rdev->flags & RADEON_IS_MOBILITY) {
- rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_ps_idx =
- r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 1);
- rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_ps_idx =
- r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 1);
- rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_cm_idx = 0;
- rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_cm_idx = 1;
- } else {
- rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_ps_idx =
- r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1);
- rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_ps_idx =
- r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1);
- rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_cm_idx = 0;
- rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_cm_idx = 1;
- }
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_ps_idx = idx;
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_ps_idx = idx;
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_cm_idx = 0;
+ rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_cm_idx = 1;
/* high mh */
- rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_ps_idx =
- r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1);
- rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_ps_idx =
- r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1);
+ idx = radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1);
+ rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_ps_idx = idx;
+ rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_ps_idx = idx;
rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_cm_idx = 0;
rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_cm_idx = 2;
}
struct radeon_power_state {
enum radeon_pm_state_type type;
- /* XXX: use a define for num clock modes */
- struct radeon_pm_clock_info clock_info[8];
+ struct radeon_pm_clock_info *clock_info;
/* number of valid clock modes in this power state */
int num_clock_modes;
struct radeon_pm_clock_info *default_clock_mode;
struct device *int_hwmon_dev;
};
+int radeon_pm_get_type_index(struct radeon_device *rdev,
+ enum radeon_pm_state_type ps_type,
+ int instance);
/*
* Benchmarking
u64 gpu_addr;
};
+
+/*
+ * Mutex which allows recursive locking from the same process.
+ */
+struct radeon_mutex {
+ struct mutex mutex;
+ struct task_struct *owner;
+ int level;
+};
+
+static inline void radeon_mutex_init(struct radeon_mutex *mutex)
+{
+ mutex_init(&mutex->mutex);
+ mutex->owner = NULL;
+ mutex->level = 0;
+}
+
+static inline void radeon_mutex_lock(struct radeon_mutex *mutex)
+{
+ if (mutex_trylock(&mutex->mutex)) {
+ /* The mutex was unlocked before, so it's ours now */
+ mutex->owner = current;
+ } else if (mutex->owner != current) {
+ /* Another process locked the mutex, take it */
+ mutex_lock(&mutex->mutex);
+ mutex->owner = current;
+ }
+ /* Otherwise the mutex was already locked by this process */
+
+ mutex->level++;
+}
+
+static inline void radeon_mutex_unlock(struct radeon_mutex *mutex)
+{
+ if (--mutex->level > 0)
+ return;
+
+ mutex->owner = NULL;
+ mutex_unlock(&mutex->mutex);
+}
+
+
/*
* Core structure, functions and helpers.
*/
struct radeon_gem gem;
struct radeon_pm pm;
uint32_t bios_scratch[RADEON_BIOS_NUM_SCRATCH];
- struct mutex cs_mutex;
+ struct radeon_mutex cs_mutex;
struct radeon_wb wb;
struct radeon_dummy_page dummy_page;
bool gpu_lockup;
.pm_misc = &evergreen_pm_misc,
.pm_prepare = &evergreen_pm_prepare,
.pm_finish = &evergreen_pm_finish,
- .pm_init_profile = &rs780_pm_init_profile,
+ .pm_init_profile = &sumo_pm_init_profile,
.pm_get_dynpm_state = &r600_pm_get_dynpm_state,
.pre_page_flip = &evergreen_pre_page_flip,
.page_flip = &evergreen_page_flip,
extern void evergreen_pm_misc(struct radeon_device *rdev);
extern void evergreen_pm_prepare(struct radeon_device *rdev);
extern void evergreen_pm_finish(struct radeon_device *rdev);
+extern void sumo_pm_init_profile(struct radeon_device *rdev);
extern void evergreen_pre_page_flip(struct radeon_device *rdev, int crtc);
extern u32 evergreen_page_flip(struct radeon_device *rdev, int crtc, u64 crtc_base);
extern void evergreen_post_page_flip(struct radeon_device *rdev, int crtc);
for (i = 0; i < num_indices; i++) {
gpio = &i2c_info->asGPIO_Info[i];
+ /* r4xx mask is technically not used by the hw, so patch in the legacy mask bits */
+ if ((rdev->family == CHIP_R420) ||
+ (rdev->family == CHIP_R423) ||
+ (rdev->family == CHIP_RV410)) {
+ if ((le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x0018) ||
+ (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x0019) ||
+ (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x001a)) {
+ gpio->ucClkMaskShift = 0x19;
+ gpio->ucDataMaskShift = 0x18;
+ }
+ }
+
/* some evergreen boards have bad data for this entry */
if (ASIC_IS_DCE4(rdev)) {
if ((i == 7) &&
return state_index;
/* last mode is usually default, array is low to high */
for (i = 0; i < num_modes; i++) {
+ rdev->pm.power_state[state_index].clock_info =
+ kzalloc(sizeof(struct radeon_pm_clock_info) * 1, GFP_KERNEL);
+ if (!rdev->pm.power_state[state_index].clock_info)
+ return state_index;
+ rdev->pm.power_state[state_index].num_clock_modes = 1;
rdev->pm.power_state[state_index].clock_info[0].voltage.type = VOLTAGE_NONE;
switch (frev) {
case 1:
- rdev->pm.power_state[state_index].num_clock_modes = 1;
rdev->pm.power_state[state_index].clock_info[0].mclk =
le16_to_cpu(power_info->info.asPowerPlayInfo[i].usMemoryClock);
rdev->pm.power_state[state_index].clock_info[0].sclk =
state_index++;
break;
case 2:
- rdev->pm.power_state[state_index].num_clock_modes = 1;
rdev->pm.power_state[state_index].clock_info[0].mclk =
le32_to_cpu(power_info->info_2.asPowerPlayInfo[i].ulMemoryClock);
rdev->pm.power_state[state_index].clock_info[0].sclk =
state_index++;
break;
case 3:
- rdev->pm.power_state[state_index].num_clock_modes = 1;
rdev->pm.power_state[state_index].clock_info[0].mclk =
le32_to_cpu(power_info->info_3.asPowerPlayInfo[i].ulMemoryClock);
rdev->pm.power_state[state_index].clock_info[0].sclk =
rdev->pm.default_power_state_index = state_index;
rdev->pm.power_state[state_index].default_clock_mode =
&rdev->pm.power_state[state_index].clock_info[mode_index - 1];
- if (ASIC_IS_DCE5(rdev)) {
+ if (ASIC_IS_DCE5(rdev) && !(rdev->flags & RADEON_IS_IGP)) {
/* NI chips post without MC ucode, so default clocks are strobe mode only */
rdev->pm.default_sclk = rdev->pm.power_state[state_index].clock_info[0].sclk;
rdev->pm.default_mclk = rdev->pm.power_state[state_index].clock_info[0].mclk;
le16_to_cpu(power_info->pplib.usNonClockInfoArrayOffset) +
(power_state->v1.ucNonClockStateIndex *
power_info->pplib.ucNonClockSize));
- for (j = 0; j < (power_info->pplib.ucStateEntrySize - 1); j++) {
- clock_info = (union pplib_clock_info *)
- (mode_info->atom_context->bios + data_offset +
- le16_to_cpu(power_info->pplib.usClockInfoArrayOffset) +
- (power_state->v1.ucClockStateIndices[j] *
- power_info->pplib.ucClockInfoSize));
- valid = radeon_atombios_parse_pplib_clock_info(rdev,
- state_index, mode_index,
- clock_info);
- if (valid)
- mode_index++;
+ rdev->pm.power_state[i].clock_info = kzalloc(sizeof(struct radeon_pm_clock_info) *
+ ((power_info->pplib.ucStateEntrySize - 1) ?
+ (power_info->pplib.ucStateEntrySize - 1) : 1),
+ GFP_KERNEL);
+ if (!rdev->pm.power_state[i].clock_info)
+ return state_index;
+ if (power_info->pplib.ucStateEntrySize - 1) {
+ for (j = 0; j < (power_info->pplib.ucStateEntrySize - 1); j++) {
+ clock_info = (union pplib_clock_info *)
+ (mode_info->atom_context->bios + data_offset +
+ le16_to_cpu(power_info->pplib.usClockInfoArrayOffset) +
+ (power_state->v1.ucClockStateIndices[j] *
+ power_info->pplib.ucClockInfoSize));
+ valid = radeon_atombios_parse_pplib_clock_info(rdev,
+ state_index, mode_index,
+ clock_info);
+ if (valid)
+ mode_index++;
+ }
+ } else {
+ rdev->pm.power_state[state_index].clock_info[0].mclk =
+ rdev->clock.default_mclk;
+ rdev->pm.power_state[state_index].clock_info[0].sclk =
+ rdev->clock.default_sclk;
+ mode_index++;
}
rdev->pm.power_state[state_index].num_clock_modes = mode_index;
if (mode_index) {
non_clock_array_index = i; /* power_state->v2.nonClockInfoIndex */
non_clock_info = (struct _ATOM_PPLIB_NONCLOCK_INFO *)
&non_clock_info_array->nonClockInfo[non_clock_array_index];
- for (j = 0; j < power_state->v2.ucNumDPMLevels; j++) {
- clock_array_index = power_state->v2.clockInfoIndex[j];
- /* XXX this might be an inagua bug... */
- if (clock_array_index >= clock_info_array->ucNumEntries)
- continue;
- clock_info = (union pplib_clock_info *)
- &clock_info_array->clockInfo[clock_array_index];
- valid = radeon_atombios_parse_pplib_clock_info(rdev,
- state_index, mode_index,
- clock_info);
- if (valid)
- mode_index++;
+ rdev->pm.power_state[i].clock_info = kzalloc(sizeof(struct radeon_pm_clock_info) *
+ (power_state->v2.ucNumDPMLevels ?
+ power_state->v2.ucNumDPMLevels : 1),
+ GFP_KERNEL);
+ if (!rdev->pm.power_state[i].clock_info)
+ return state_index;
+ if (power_state->v2.ucNumDPMLevels) {
+ for (j = 0; j < power_state->v2.ucNumDPMLevels; j++) {
+ clock_array_index = power_state->v2.clockInfoIndex[j];
+ /* XXX this might be an inagua bug... */
+ if (clock_array_index >= clock_info_array->ucNumEntries)
+ continue;
+ clock_info = (union pplib_clock_info *)
+ &clock_info_array->clockInfo[clock_array_index];
+ valid = radeon_atombios_parse_pplib_clock_info(rdev,
+ state_index, mode_index,
+ clock_info);
+ if (valid)
+ mode_index++;
+ }
+ } else {
+ rdev->pm.power_state[state_index].clock_info[0].mclk =
+ rdev->clock.default_mclk;
+ rdev->pm.power_state[state_index].clock_info[0].sclk =
+ rdev->clock.default_sclk;
+ mode_index++;
}
rdev->pm.power_state[state_index].num_clock_modes = mode_index;
if (mode_index) {
} else {
rdev->pm.power_state = kzalloc(sizeof(struct radeon_power_state), GFP_KERNEL);
if (rdev->pm.power_state) {
- /* add the default mode */
- rdev->pm.power_state[state_index].type =
- POWER_STATE_TYPE_DEFAULT;
- rdev->pm.power_state[state_index].num_clock_modes = 1;
- rdev->pm.power_state[state_index].clock_info[0].mclk = rdev->clock.default_mclk;
- rdev->pm.power_state[state_index].clock_info[0].sclk = rdev->clock.default_sclk;
- rdev->pm.power_state[state_index].default_clock_mode =
- &rdev->pm.power_state[state_index].clock_info[0];
- rdev->pm.power_state[state_index].clock_info[0].voltage.type = VOLTAGE_NONE;
- rdev->pm.power_state[state_index].pcie_lanes = 16;
- rdev->pm.default_power_state_index = state_index;
- rdev->pm.power_state[state_index].flags = 0;
- state_index++;
+ rdev->pm.power_state[0].clock_info =
+ kzalloc(sizeof(struct radeon_pm_clock_info) * 1, GFP_KERNEL);
+ if (rdev->pm.power_state[0].clock_info) {
+ /* add the default mode */
+ rdev->pm.power_state[state_index].type =
+ POWER_STATE_TYPE_DEFAULT;
+ rdev->pm.power_state[state_index].num_clock_modes = 1;
+ rdev->pm.power_state[state_index].clock_info[0].mclk = rdev->clock.default_mclk;
+ rdev->pm.power_state[state_index].clock_info[0].sclk = rdev->clock.default_sclk;
+ rdev->pm.power_state[state_index].default_clock_mode =
+ &rdev->pm.power_state[state_index].clock_info[0];
+ rdev->pm.power_state[state_index].clock_info[0].voltage.type = VOLTAGE_NONE;
+ rdev->pm.power_state[state_index].pcie_lanes = 16;
+ rdev->pm.default_power_state_index = state_index;
+ rdev->pm.power_state[state_index].flags = 0;
+ state_index++;
+ }
}
}
struct radeon_bo *sobj = NULL;
uint64_t saddr, daddr;
int r, n;
- unsigned int time;
+ int time;
n = RADEON_BENCHMARK_ITERATIONS;
r = radeon_bo_create(rdev, size, PAGE_SIZE, true, sdomain, &sobj);
/* allocate 2 power states */
rdev->pm.power_state = kzalloc(sizeof(struct radeon_power_state) * 2, GFP_KERNEL);
- if (!rdev->pm.power_state) {
- rdev->pm.default_power_state_index = state_index;
- rdev->pm.num_power_states = 0;
-
- rdev->pm.current_power_state_index = rdev->pm.default_power_state_index;
- rdev->pm.current_clock_mode_index = 0;
- return;
- }
+ if (rdev->pm.power_state) {
+ /* allocate 1 clock mode per state */
+ rdev->pm.power_state[0].clock_info =
+ kzalloc(sizeof(struct radeon_pm_clock_info) * 1, GFP_KERNEL);
+ rdev->pm.power_state[1].clock_info =
+ kzalloc(sizeof(struct radeon_pm_clock_info) * 1, GFP_KERNEL);
+ if (!rdev->pm.power_state[0].clock_info ||
+ !rdev->pm.power_state[1].clock_info)
+ goto pm_failed;
+ } else
+ goto pm_failed;
/* check for a thermal chip */
offset = combios_get_table_offset(dev, COMBIOS_OVERDRIVE_INFO_TABLE);
rdev->pm.default_power_state_index = state_index;
rdev->pm.num_power_states = state_index + 1;
+ rdev->pm.current_power_state_index = rdev->pm.default_power_state_index;
+ rdev->pm.current_clock_mode_index = 0;
+ return;
+
+pm_failed:
+ rdev->pm.default_power_state_index = state_index;
+ rdev->pm.num_power_states = 0;
+
rdev->pm.current_power_state_index = rdev->pm.default_power_state_index;
rdev->pm.current_clock_mode_index = 0;
}
struct radeon_cs_chunk *ib_chunk;
int r;
- mutex_lock(&rdev->cs_mutex);
+ radeon_mutex_lock(&rdev->cs_mutex);
/* initialize parser */
memset(&parser, 0, sizeof(struct radeon_cs_parser));
parser.filp = filp;
if (r) {
DRM_ERROR("Failed to initialize parser !\n");
radeon_cs_parser_fini(&parser, r);
- mutex_unlock(&rdev->cs_mutex);
+ radeon_mutex_unlock(&rdev->cs_mutex);
return r;
}
r = radeon_ib_get(rdev, &parser.ib);
if (r) {
DRM_ERROR("Failed to get ib !\n");
radeon_cs_parser_fini(&parser, r);
- mutex_unlock(&rdev->cs_mutex);
+ radeon_mutex_unlock(&rdev->cs_mutex);
return r;
}
r = radeon_cs_parser_relocs(&parser);
if (r != -ERESTARTSYS)
DRM_ERROR("Failed to parse relocation %d!\n", r);
radeon_cs_parser_fini(&parser, r);
- mutex_unlock(&rdev->cs_mutex);
+ radeon_mutex_unlock(&rdev->cs_mutex);
return r;
}
/* Copy the packet into the IB, the parser will read from the
if (r || parser.parser_error) {
DRM_ERROR("Invalid command stream !\n");
radeon_cs_parser_fini(&parser, r);
- mutex_unlock(&rdev->cs_mutex);
+ radeon_mutex_unlock(&rdev->cs_mutex);
return r;
}
r = radeon_cs_finish_pages(&parser);
if (r) {
DRM_ERROR("Invalid command stream !\n");
radeon_cs_parser_fini(&parser, r);
- mutex_unlock(&rdev->cs_mutex);
+ radeon_mutex_unlock(&rdev->cs_mutex);
return r;
}
r = radeon_ib_schedule(rdev, parser.ib);
DRM_ERROR("Failed to schedule IB !\n");
}
radeon_cs_parser_fini(&parser, r);
- mutex_unlock(&rdev->cs_mutex);
+ radeon_mutex_unlock(&rdev->cs_mutex);
return r;
}
/* mutex initialization are all done here so we
* can recall function without having locking issues */
- mutex_init(&rdev->cs_mutex);
+ radeon_mutex_init(&rdev->cs_mutex);
mutex_init(&rdev->ib_pool.mutex);
mutex_init(&rdev->cp.mutex);
mutex_init(&rdev->dc_hw_i2c_mutex);
int r;
int resched;
+ /* Prevent CS ioctl from interfering */
+ radeon_mutex_lock(&rdev->cs_mutex);
+
radeon_save_bios_scratch_regs(rdev);
/* block TTM */
resched = ttm_bo_lock_delayed_workqueue(&rdev->mman.bdev);
radeon_restore_bios_scratch_regs(rdev);
drm_helper_resume_force_mode(rdev->ddev);
ttm_bo_unlock_delayed_workqueue(&rdev->mman.bdev, resched);
- return 0;
}
- /* bad news, how to tell it to userspace ? */
- dev_info(rdev->dev, "GPU reset failed\n");
+
+ radeon_mutex_unlock(&rdev->cs_mutex);
+
+ if (r) {
+ /* bad news, how to tell it to userspace ? */
+ dev_info(rdev->dev, "GPU reset failed\n");
+ }
+
return r;
}
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
- struct drm_device *dev = crtc->dev;
- struct radeon_device *rdev = dev->dev_private;
-
- /* adjust pm to upcoming mode change */
- radeon_pm_compute_clocks(rdev);
-
if (!radeon_crtc_scaling_mode_fixup(crtc, mode, adjusted_mode))
return false;
return true;
#define ACPI_AC_CLASS "ac_adapter"
+int radeon_pm_get_type_index(struct radeon_device *rdev,
+ enum radeon_pm_state_type ps_type,
+ int instance)
+{
+ int i;
+ int found_instance = -1;
+
+ for (i = 0; i < rdev->pm.num_power_states; i++) {
+ if (rdev->pm.power_state[i].type == ps_type) {
+ found_instance++;
+ if (found_instance == instance)
+ return i;
+ }
+ }
+ /* return default if no match */
+ return rdev->pm.default_power_state_index;
+}
+
#ifdef CONFIG_ACPI
static int radeon_acpi_event(struct notifier_block *nb,
unsigned long val,
struct vmw_dma_buffer *dmabuf = NULL;
int ret;
+ /* A lot of the code assumes this */
+ if (handle && (width != 64 || height != 64))
+ return -EINVAL;
+
if (handle) {
ret = vmw_user_surface_lookup_handle(dev_priv, tfile,
handle, &surface);
top = clips->y1;
bottom = clips->y2;
- clips_ptr = clips;
- for (i = 1; i < num_clips; i++, clips_ptr += inc) {
+ /* skip the first clip rect */
+ for (i = 1, clips_ptr = clips + inc;
+ i < num_clips; i++, clips_ptr += inc) {
left = min_t(int, left, (int)clips_ptr->x1);
right = max_t(int, right, (int)clips_ptr->x2);
top = min_t(int, top, (int)clips_ptr->y1);
* drm_encoder_cleanup which takes the lock we deadlock.
*/
drm_mode_config_cleanup(dev_priv->dev);
- vmw_kms_close_legacy_display_system(dev_priv);
+ if (dev_priv->sou_priv)
+ vmw_kms_close_screen_object_display(dev_priv);
+ else
+ vmw_kms_close_legacy_display_system(dev_priv);
return 0;
}
while (new_bus) {
new_bridge = new_bus->self;
- if (new_bridge) {
- /* go through list of devices already registered */
- list_for_each_entry(same_bridge_vgadev, &vga_list, list) {
- bus = same_bridge_vgadev->pdev->bus;
- bridge = bus->self;
-
- /* see if the share a bridge with this device */
- if (new_bridge == bridge) {
- /* if their direct parent bridge is the same
- as any bridge of this device then it can't be used
- for that device */
- same_bridge_vgadev->bridge_has_one_vga = false;
- }
+ /* go through list of devices already registered */
+ list_for_each_entry(same_bridge_vgadev, &vga_list, list) {
+ bus = same_bridge_vgadev->pdev->bus;
+ bridge = bus->self;
+
+ /* see if the share a bridge with this device */
+ if (new_bridge == bridge) {
+ /* if their direct parent bridge is the same
+ as any bridge of this device then it can't be used
+ for that device */
+ same_bridge_vgadev->bridge_has_one_vga = false;
+ }
- /* now iterate the previous devices bridge hierarchy */
- /* if the new devices parent bridge is in the other devices
- hierarchy then we can't use it to control this device */
- while (bus) {
- bridge = bus->self;
- if (bridge) {
- if (bridge == vgadev->pdev->bus->self)
- vgadev->bridge_has_one_vga = false;
- }
- bus = bus->parent;
+ /* now iterate the previous devices bridge hierarchy */
+ /* if the new devices parent bridge is in the other devices
+ hierarchy then we can't use it to control this device */
+ while (bus) {
+ bridge = bus->self;
+ if (bridge) {
+ if (bridge == vgadev->pdev->bus->self)
+ vgadev->bridge_has_one_vga = false;
}
+ bus = bus->parent;
}
}
new_bus = new_bus->parent;
config SENSORS_EXYNOS4_TMU
tristate "Temperature sensor on Samsung EXYNOS4"
- depends on EXYNOS4_DEV_TMU
+ depends on ARCH_EXYNOS4
help
If you say yes here you get support for TMU (Thermal Managment
Unit) on SAMSUNG EXYNOS4 series of SoC.
* General Public License for more details.
*/
+#include <linux/module.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/pm_runtime.h>
return -ENODEV;
io_base = ioremap(res->start, resource_size(res));
- if (!io_base) {
- ret = -ENOMEM;
- goto free_state;
- }
+ if (!io_base)
+ return -ENOMEM;
/* make sure protocol 1 is selected */
val = readl(io_base + HSEM_CTRL_REG);
/*
* Copyright (C) 1998-2000 Andreas S. Krebs (akrebs@altavista.net), Maintainer
* Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org>, Integrator
- * Copyright (C) 2007-2010 Bartlomiej Zolnierkiewicz
+ * Copyright (C) 2007-2011 Bartlomiej Zolnierkiewicz
*
* CYPRESS CY82C693 chipset IDE controller
*
u8 time_16, time_8;
/* select primary or secondary channel */
- if (hwif->index > 0) { /* drive is on the secondary channel */
+ if (drive->dn > 1) { /* drive is on the secondary channel */
dev = pci_get_slot(dev->bus, dev->devfn+1);
if (!dev) {
printk(KERN_ERR "%s: tune_drive: "
pci_write_config_byte(dev, CY82_IDE_SLAVE_IOW, time_16);
pci_write_config_byte(dev, CY82_IDE_SLAVE_8BIT, time_8);
}
- if (hwif->index > 0)
+ if (drive->dn > 1)
pci_dev_put(dev);
}
if (ec->dma != NO_DMA && !request_dma(ec->dma, DRV_NAME)) {
d.init_dma = icside_dma_init;
d.port_ops = &icside_v6_port_ops;
+ } else
d.dma_ops = NULL;
- }
ret = ide_host_register(host, &d, hws);
if (ret)
/* For SCSI -> ATAPI command conversion */
#include <scsi/scsi.h>
-#include <linux/irq.h>
#include <linux/io.h>
#include <asm/byteorder.h>
#include <linux/uaccess.h>
#include <scsi/scsi_ioctl.h>
#include <asm/byteorder.h>
-#include <linux/irq.h>
#include <linux/uaccess.h>
#include <linux/io.h>
#include <asm/unaligned.h>
#include <scsi/scsi.h>
#include <asm/byteorder.h>
-#include <linux/irq.h>
#include <linux/uaccess.h>
#include <linux/io.h>
#include <asm/unaligned.h>
.udma_mask = udma, \
}
-#define DECLARE_ICH_DEV(udma) \
+#define DECLARE_ICH_DEV(mwdma, udma) \
{ \
.name = DRV_NAME, \
.init_chipset = init_chipset_ich, \
.port_ops = &ich_port_ops, \
.pio_mask = ATA_PIO4, \
.swdma_mask = ATA_SWDMA2_ONLY, \
- .mwdma_mask = ATA_MWDMA12_ONLY, \
+ .mwdma_mask = mwdma, \
.udma_mask = udma, \
}
/* 2: PIIX4 */
DECLARE_PIIX_DEV(ATA_UDMA2),
/* 3: ICH0 */
- DECLARE_ICH_DEV(ATA_UDMA2),
+ DECLARE_ICH_DEV(ATA_MWDMA12_ONLY, ATA_UDMA2),
/* 4: ICH */
- DECLARE_ICH_DEV(ATA_UDMA4),
+ DECLARE_ICH_DEV(ATA_MWDMA12_ONLY, ATA_UDMA4),
/* 5: PIIX4 */
DECLARE_PIIX_DEV(ATA_UDMA4),
- /* 6: ICH[2-7]/ICH[2-3]M/C-ICH/ICH5-SATA/ESB2/ICH8M */
- DECLARE_ICH_DEV(ATA_UDMA5),
+ /* 6: ICH[2-6]/ICH[2-3]M/C-ICH/ICH5-SATA/ESB2/ICH8M */
+ DECLARE_ICH_DEV(ATA_MWDMA12_ONLY, ATA_UDMA5),
+ /* 7: ICH7/7-R, no MWDMA1 */
+ DECLARE_ICH_DEV(ATA_MWDMA2_ONLY, ATA_UDMA5),
};
/**
#endif
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ESB_2), 6 },
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICH6_19), 6 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICH7_21), 6 },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICH7_21), 7 },
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801DB_1), 6 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ESB2_18), 6 },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ESB2_18), 7 },
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICH8_6), 6 },
{ 0, },
};
};
MODULE_DEVICE_TABLE(pci, triflex_pci_tbl);
+#ifdef CONFIG_PM
+static int triflex_ide_pci_suspend(struct pci_dev *dev, pm_message_t state)
+{
+ /*
+ * We must not disable or powerdown the device.
+ * APM bios refuses to suspend if IDE is not accessible.
+ */
+ pci_save_state(dev);
+ return 0;
+}
+#else
+#define triflex_ide_pci_suspend NULL
+#endif
+
static struct pci_driver triflex_pci_driver = {
.name = "TRIFLEX_IDE",
.id_table = triflex_pci_tbl,
.probe = triflex_init_one,
.remove = ide_pci_remove,
- .suspend = ide_pci_suspend,
+ .suspend = triflex_ide_pci_suspend,
.resume = ide_pci_resume,
};
* published by the Free Software Foundation.
*/
+#include <linux/module.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
* published by the Free Software Foundation.
*/
+#include <linux/module.h>
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>
del_timer_sync(&led_cdev->blink_timer);
if (led_cdev->blink_set &&
- !led_cdev->blink_set(led_cdev, delay_on, delay_off)) {
- led_cdev->blink_delay_on = *delay_on;
- led_cdev->blink_delay_off = *delay_off;
+ !led_cdev->blink_set(led_cdev, delay_on, delay_off))
return;
- }
/* blink with 1 Hz as default if nothing specified */
if (!*delay_on && !*delay_off)
err = macii_init_via();
if (err) goto out;
- err = request_irq(IRQ_MAC_ADB, macii_interrupt, IRQ_FLG_LOCK, "ADB",
+ err = request_irq(IRQ_MAC_ADB, macii_interrupt, 0, "ADB",
macii_interrupt);
if (err) goto out;
return err;
}
- if (request_irq(IRQ_MAC_ADB, maciisi_interrupt, IRQ_FLG_LOCK | IRQ_FLG_FAST,
- "ADB", maciisi_interrupt)) {
+ if (request_irq(IRQ_MAC_ADB, maciisi_interrupt, 0, "ADB",
+ maciisi_interrupt)) {
printk(KERN_ERR "maciisi_init: can't get irq %d\n", IRQ_MAC_ADB);
return -EAGAIN;
}
struct r5dev *pdev, *qdev;
clear_bit(STRIPE_HANDLE, &sh->state);
- if (test_and_set_bit(STRIPE_ACTIVE, &sh->state)) {
+ if (test_and_set_bit_lock(STRIPE_ACTIVE, &sh->state)) {
/* already being handled, ensure it gets handled
* again when current action finishes */
set_bit(STRIPE_HANDLE, &sh->state);
/* check if the array has lost more than max_degraded devices and,
* if so, some requests might need to be failed.
*/
- if (s.failed > conf->max_degraded && s.to_read+s.to_write+s.written)
- handle_failed_stripe(conf, sh, &s, disks, &s.return_bi);
- if (s.failed > conf->max_degraded && s.syncing)
- handle_failed_sync(conf, sh, &s);
+ if (s.failed > conf->max_degraded) {
+ sh->check_state = 0;
+ sh->reconstruct_state = 0;
+ if (s.to_read+s.to_write+s.written)
+ handle_failed_stripe(conf, sh, &s, disks, &s.return_bi);
+ if (s.syncing)
+ handle_failed_sync(conf, sh, &s);
+ }
/*
* might be able to return some write requests if the parity blocks
return_io(s.return_bi);
- clear_bit(STRIPE_ACTIVE, &sh->state);
+ clear_bit_unlock(STRIPE_ACTIVE, &sh->state);
}
static void raid5_activate_delayed(struct r5conf *conf)
u8 i2c_r_data[24];
u8 i = 0;
u8 fifo_status = 0;
- int ret;
int status = 0;
mxl_i2c("read %d bytes", count);
i2c_w_data[4+(i*3)] = 0x00;
}
- ret = mxl111sf_i2c_get_data(state, 0, i2c_w_data, i2c_r_data);
+ mxl111sf_i2c_get_data(state, 0, i2c_w_data, i2c_r_data);
/* Check for I2C NACK status */
if (mxl111sf_i2c_check_status(state) == 1) {
goto fail;
ret = mxl111sf_write_reg(state, 0x00, 0x00);
- if (mxl_fail(ret))
- goto fail;
+ mxl_fail(ret);
fail:
return ret;
}
/* set hysteresis value reg: 0x0B<5:0> */
ret = mxl111sf_write_reg(state, V6_IDAC_HYSTERESIS_REG,
(hysteresis_value & 0x3F));
+ mxl_fail(ret);
}
ret = mxl111sf_write_reg(state, V6_IDAC_SETTINGS_REG, val);
+ mxl_fail(ret);
- return val;
+ return ret;
}
/*
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/media.h>
+#include <linux/module.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
strncpy(cap->card, dev->plat_dev->name, sizeof(cap->card) - 1);
cap->bus_info[0] = 0;
cap->version = KERNEL_VERSION(1, 0, 0);
- cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VIDEO_OUTPUT
- | V4L2_CAP_STREAMING;
+ cap->capabilities = V4L2_CAP_VIDEO_CAPTURE_MPLANE |
+ V4L2_CAP_VIDEO_OUTPUT_MPLANE | V4L2_CAP_STREAMING;
return 0;
}
strncpy(cap->card, dev->plat_dev->name, sizeof(cap->card) - 1);
cap->bus_info[0] = 0;
cap->version = KERNEL_VERSION(1, 0, 0);
- cap->capabilities = V4L2_CAP_VIDEO_CAPTURE
- | V4L2_CAP_VIDEO_OUTPUT
+ cap->capabilities = V4L2_CAP_VIDEO_CAPTURE_MPLANE
+ | V4L2_CAP_VIDEO_OUTPUT_MPLANE
| V4L2_CAP_STREAMING;
return 0;
}
menu_info = &mapping->menu_info[query_menu->index];
- if (ctrl->info.flags & UVC_CTRL_FLAG_GET_RES) {
+ if (mapping->data_type == UVC_CTRL_DATA_TYPE_BITMASK &&
+ (ctrl->info.flags & UVC_CTRL_FLAG_GET_RES)) {
s32 bitmap;
if (!ctrl->cached) {
/* Valid menu indices are reported by the GET_RES request for
* UVC controls that support it.
*/
- if (ctrl->info.flags & UVC_CTRL_FLAG_GET_RES) {
+ if (mapping->data_type == UVC_CTRL_DATA_TYPE_BITMASK &&
+ (ctrl->info.flags & UVC_CTRL_FLAG_GET_RES)) {
if (!ctrl->cached) {
ret = uvc_ctrl_populate_cache(chain, ctrl);
if (ret < 0)
fill_event(&ev, ctrl, changes);
list_for_each_entry(sev, &ctrl->ev_subs, node)
- if (sev->fh && (sev->fh != fh ||
- (sev->flags & V4L2_EVENT_SUB_FL_ALLOW_FEEDBACK)))
+ if (sev->fh != fh ||
+ (sev->flags & V4L2_EVENT_SUB_FL_ALLOW_FEEDBACK))
v4l2_event_queue_fh(sev->fh, &ev);
}
if (ctrl->cluster[0]->has_volatiles)
ctrl->flags |= V4L2_CTRL_FLAG_VOLATILE;
}
+ fh = NULL;
}
if (changed || update_inactive) {
/* If a control was changed that was not one of the controls
unsigned long flags;
unsigned i;
+ if (sub->type == V4L2_EVENT_ALL)
+ return -EINVAL;
+
if (elems < 1)
elems = 1;
if (sub->type == V4L2_EVENT_CTRL) {
{
struct v4l2_subscribed_event *sev;
unsigned long flags;
+ int i;
if (sub->type == V4L2_EVENT_ALL) {
v4l2_event_unsubscribe_all(fh);
sev = v4l2_event_subscribed(fh, sub->type, sub->id);
if (sev != NULL) {
+ /* Remove any pending events for this subscription */
+ for (i = 0; i < sev->in_use; i++) {
+ list_del(&sev->events[sev_pos(sev, i)].list);
+ fh->navailable--;
+ }
list_del(&sev->list);
- sev->fh = NULL;
}
spin_unlock_irqrestore(&fh->vdev->fh_lock, flags);
continue;
for (plane = 0; plane < vb->num_planes; ++plane) {
+ vb->v4l2_planes[plane].length = q->plane_sizes[plane];
vb->v4l2_planes[plane].m.mem_offset = off;
dprintk(3, "Buffer %d, plane %d offset 0x%08lx\n",
q->num_buffers -= buffers;
if (!q->num_buffers)
q->memory = 0;
+ INIT_LIST_HEAD(&q->queued_list);
}
/**
{
unsigned int plane;
for (plane = 0; plane < vb->num_planes; ++plane) {
+ void *mem_priv = vb->planes[plane].mem_priv;
/*
* If num_users() has not been provided, call_memop
* will return 0, apparently nobody cares about this
* case anyway. If num_users() returns more than 1,
* we are not the only user of the plane's memory.
*/
- if (call_memop(q, plane, num_users,
- vb->planes[plane].mem_priv) > 1)
+ if (mem_priv && call_memop(q, plane, num_users, mem_priv) > 1)
return true;
}
return false;
* TODO: Event handling with irq_chip. Waiting for PRCMU fw support.
*/
+#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/err.h>
#include <linux/platform_device.h>
* Debugfs support for the AB5500 MFD driver
*/
+#include <linux/export.h>
#include <linux/debugfs.h>
#include <linux/seq_file.h>
#include <linux/mfd/ab5500/ab5500.h>
module will be called bmp085.
config PCH_PHUB
- tristate "Intel EG20T PCH / OKI SEMICONDUCTOR IOH(ML7213/ML7223) PHUB"
+ tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) PHUB"
depends on PCI
help
This driver is for PCH(Platform controller Hub) PHUB(Packet Hub) of
processor. The Topcliff has MAC address and Option ROM data in SROM.
This driver can access MAC address and Option ROM data in SROM.
- This driver also can be used for OKI SEMICONDUCTOR IOH(Input/
- Output Hub), ML7213 and ML7223.
- ML7213 IOH is for IVI(In-Vehicle Infotainment) use and ML7223 IOH is
- for MP(Media Phone) use.
- ML7213/ML7223 is companion chip for Intel Atom E6xx series.
- ML7213/ML7223 is completely compatible for Intel EG20T PCH.
+ This driver also can be used for LAPIS Semiconductor's IOH,
+ ML7213/ML7223/ML7831.
+ ML7213 which is for IVI(In-Vehicle Infotainment) use.
+ ML7223 IOH is for MP(Media Phone) use.
+ ML7831 IOH is for general purpose use.
+ ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series.
+ ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH.
To compile this driver as a module, choose M here: the module will
be called pch_phub.
AD5293_ID = DPOT_CONF(F_RDACS_RW | F_SPI_16BIT, BRDAC0, 10, 27),
AD7376_ID = DPOT_CONF(F_RDACS_WONLY | F_AD_APPDATA | F_SPI_8BIT,
BRDAC0, 7, 28),
- AD8400_ID = DPOT_CONF(F_RDACS_WONLY | F_AD_APPDATA | F_SPI_8BIT,
+ AD8400_ID = DPOT_CONF(F_RDACS_WONLY | F_AD_APPDATA | F_SPI_16BIT,
BRDAC0, 8, 29),
AD8402_ID = DPOT_CONF(F_RDACS_WONLY | F_AD_APPDATA | F_SPI_16BIT,
BRDAC0 | BRDAC1, 8, 30),
/* CTL-CPLD Version Register */
#define CTL_CPLD_VERSION 0x2000
-static int fpga_of_probe(struct platform_device *op,
- const struct of_device_id *match)
+static int fpga_of_probe(struct platform_device *op)
{
struct device_node *of_node = op->dev.of_node;
struct device *this_device;
{},
};
-static struct of_platform_driver fpga_of_driver = {
+static struct platform_driver fpga_of_driver = {
.probe = fpga_of_probe,
.remove = fpga_of_remove,
.driver = {
static int __init fpga_init(void)
{
led_trigger_register_simple("fpga", &ledtrig_fpga);
- return of_register_platform_driver(&fpga_of_driver);
+ return platform_driver_register(&fpga_of_driver);
}
static void __exit fpga_exit(void)
{
- of_unregister_platform_driver(&fpga_of_driver);
+ platform_driver_unregister(&fpga_of_driver);
led_trigger_unregister_simple(ledtrig_fpga);
}
return true;
}
-static int data_of_probe(struct platform_device *op,
- const struct of_device_id *match)
+static int data_of_probe(struct platform_device *op)
{
struct device_node *of_node = op->dev.of_node;
struct device *this_device;
{},
};
-static struct of_platform_driver data_of_driver = {
+static struct platform_driver data_of_driver = {
.probe = data_of_probe,
.remove = data_of_remove,
.driver = {
static int __init data_init(void)
{
- return of_register_platform_driver(&data_of_driver);
+ return platform_driver_register(&data_of_driver);
}
static void __exit data_exit(void)
{
- of_unregister_platform_driver(&data_of_driver);
+ platform_driver_unregister(&data_of_driver);
}
MODULE_AUTHOR("Ira W. Snyder <iws@ovro.caltech.edu>");
config EEPROM_DIGSY_MTC_CFG
bool "DigsyMTC display configuration EEPROMs device"
- depends on PPC_MPC5200_GPIO && GPIOLIB && SPI_GPIO
+ depends on GPIO_MPC5200 && SPI_GPIO
help
This option enables access to display configuration EEPROMs
on digsy_mtc board. You have to additionally select Microwire
/*
- * Copyright (C) 2010 OKI SEMICONDUCTOR CO., LTD.
+ * Copyright (C) 2011 LAPIS Semiconductor Co., Ltd.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#define PCH_PHUB_ROM_START_ADDR_EG20T 0x80 /* ROM data area start address offset
(Intel EG20T PCH)*/
#define PCH_PHUB_ROM_START_ADDR_ML7213 0x400 /* ROM data area start address
- offset(OKI SEMICONDUCTOR ML7213)
+ offset(LAPIS Semicon ML7213)
*/
#define PCH_PHUB_ROM_START_ADDR_ML7223 0x400 /* ROM data area start address
- offset(OKI SEMICONDUCTOR ML7223)
+ offset(LAPIS Semicon ML7223)
*/
/* MAX number of INT_REDUCE_CONTROL registers */
#define PCI_DEVICE_ID_ROHM_ML7223_mPHUB 0x8012 /* for Bus-m */
#define PCI_DEVICE_ID_ROHM_ML7223_nPHUB 0x8002 /* for Bus-n */
+/* Macros for ML7831 */
+#define PCI_DEVICE_ID_ROHM_ML7831_PHUB 0x8801
+
/* SROM ACCESS Macro */
#define PCH_WORD_ADDR_MASK (~((1 << 2) - 1))
* @pch_mac_start_address: MAC address area start address
* @pch_opt_rom_start_address: Option ROM start address
* @ioh_type: Save IOH type
+ * @pdev: pointer to pci device struct
*/
struct pch_phub_reg {
u32 phub_id_reg;
u32 pch_mac_start_address;
u32 pch_opt_rom_start_address;
int ioh_type;
+ struct pci_dev *pdev;
};
/* SROM SPEC for MAC address assignment offset */
int retval;
int i;
- if (chip->ioh_type == 1) /* EG20T */
+ if ((chip->ioh_type == 1) || (chip->ioh_type == 5)) /* EG20T or ML7831*/
retval = pch_phub_gbe_serial_rom_conf(chip);
else /* ML7223 */
retval = pch_phub_gbe_serial_rom_conf_mp(chip);
unsigned int orom_size;
int ret;
int err;
+ ssize_t rom_size;
struct pch_phub_reg *chip =
dev_get_drvdata(container_of(kobj, struct device, kobj));
}
/* Get Rom signature */
+ chip->pch_phub_extrom_base_address = pci_map_rom(chip->pdev, &rom_size);
+ if (!chip->pch_phub_extrom_base_address)
+ goto exrom_map_err;
+
pch_phub_read_serial_rom(chip, chip->pch_opt_rom_start_address,
(unsigned char *)&rom_signature);
rom_signature &= 0xff;
goto return_err;
}
return_ok:
+ pci_unmap_rom(chip->pdev, chip->pch_phub_extrom_base_address);
mutex_unlock(&pch_phub_mutex);
return addr_offset;
return_err:
+ pci_unmap_rom(chip->pdev, chip->pch_phub_extrom_base_address);
+exrom_map_err:
mutex_unlock(&pch_phub_mutex);
return_err_nomutex:
return err;
int err;
unsigned int addr_offset;
int ret;
+ ssize_t rom_size;
struct pch_phub_reg *chip =
dev_get_drvdata(container_of(kobj, struct device, kobj));
goto return_ok;
}
+ chip->pch_phub_extrom_base_address = pci_map_rom(chip->pdev, &rom_size);
+ if (!chip->pch_phub_extrom_base_address) {
+ err = -ENOMEM;
+ goto exrom_map_err;
+ }
+
for (addr_offset = 0; addr_offset < count; addr_offset++) {
if (PCH_PHUB_OROM_SIZE < off + addr_offset)
goto return_ok;
}
return_ok:
+ pci_unmap_rom(chip->pdev, chip->pch_phub_extrom_base_address);
mutex_unlock(&pch_phub_mutex);
return addr_offset;
return_err:
+ pci_unmap_rom(chip->pdev, chip->pch_phub_extrom_base_address);
+
+exrom_map_err:
mutex_unlock(&pch_phub_mutex);
return err;
}
{
u8 mac[8];
struct pch_phub_reg *chip = dev_get_drvdata(dev);
+ ssize_t rom_size;
+
+ chip->pch_phub_extrom_base_address = pci_map_rom(chip->pdev, &rom_size);
+ if (!chip->pch_phub_extrom_base_address)
+ return -ENOMEM;
pch_phub_read_gbe_mac_addr(chip, mac);
+ pci_unmap_rom(chip->pdev, chip->pch_phub_extrom_base_address);
return sprintf(buf, "%pM\n", mac);
}
const char *buf, size_t count)
{
u8 mac[6];
+ ssize_t rom_size;
struct pch_phub_reg *chip = dev_get_drvdata(dev);
if (count != 18)
(u32 *)&mac[0], (u32 *)&mac[1], (u32 *)&mac[2], (u32 *)&mac[3],
(u32 *)&mac[4], (u32 *)&mac[5]);
+ chip->pch_phub_extrom_base_address = pci_map_rom(chip->pdev, &rom_size);
+ if (!chip->pch_phub_extrom_base_address)
+ return -ENOMEM;
+
pch_phub_write_gbe_mac_addr(chip, mac);
+ pci_unmap_rom(chip->pdev, chip->pch_phub_extrom_base_address);
return count;
}
int retval;
int ret;
- ssize_t rom_size;
struct pch_phub_reg *chip;
chip = kzalloc(sizeof(struct pch_phub_reg), GFP_KERNEL);
"in pch_phub_base_address variable is %p\n", __func__,
chip->pch_phub_base_address);
- if (id->driver_data != 3) {
- chip->pch_phub_extrom_base_address =\
- pci_map_rom(pdev, &rom_size);
- if (chip->pch_phub_extrom_base_address == 0) {
- dev_err(&pdev->dev, "%s: pci_map_rom FAILED", __func__);
- ret = -ENOMEM;
- goto err_pci_map;
- }
- dev_dbg(&pdev->dev, "%s : "
- "pci_map_rom SUCCESS and value in "
- "pch_phub_extrom_base_address variable is %p\n",
- __func__, chip->pch_phub_extrom_base_address);
- }
+ chip->pdev = pdev; /* Save pci device struct */
if (id->driver_data == 1) { /* EG20T PCH */
const char *board_name;
chip->pch_opt_rom_start_address =\
PCH_PHUB_ROM_START_ADDR_ML7223;
chip->pch_mac_start_address = PCH_PHUB_MAC_START_ADDR_ML7223;
+ } else if (id->driver_data == 5) { /* ML7831 */
+ retval = sysfs_create_file(&pdev->dev.kobj,
+ &dev_attr_pch_mac.attr);
+ if (retval)
+ goto err_sysfs_create;
+
+ retval = sysfs_create_bin_file(&pdev->dev.kobj, &pch_bin_attr);
+ if (retval)
+ goto exit_bin_attr;
+
+ /* set the prefech value */
+ iowrite32(0x000affaa, chip->pch_phub_base_address + 0x14);
+ /* set the interrupt delay value */
+ iowrite32(0x25, chip->pch_phub_base_address + 0x44);
+ chip->pch_opt_rom_start_address = PCH_PHUB_ROM_START_ADDR_EG20T;
+ chip->pch_mac_start_address = PCH_PHUB_MAC_START_ADDR_EG20T;
}
chip->ioh_type = id->driver_data;
sysfs_remove_file(&pdev->dev.kobj, &dev_attr_pch_mac.attr);
err_sysfs_create:
- pci_unmap_rom(pdev, chip->pch_phub_extrom_base_address);
-err_pci_map:
pci_iounmap(pdev, chip->pch_phub_base_address);
err_pci_iomap:
pci_release_regions(pdev);
sysfs_remove_file(&pdev->dev.kobj, &dev_attr_pch_mac.attr);
sysfs_remove_bin_file(&pdev->dev.kobj, &pch_bin_attr);
- pci_unmap_rom(pdev, chip->pch_phub_extrom_base_address);
pci_iounmap(pdev, chip->pch_phub_base_address);
pci_release_regions(pdev);
pci_disable_device(pdev);
{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ROHM_ML7213_PHUB), 2, },
{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ROHM_ML7223_mPHUB), 3, },
{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ROHM_ML7223_nPHUB), 4, },
+ { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ROHM_ML7831_PHUB), 5, },
{ }
};
MODULE_DEVICE_TABLE(pci, pch_phub_pcidev_id);
module_init(pch_phub_pci_init);
module_exit(pch_phub_pci_exit);
-MODULE_DESCRIPTION("Intel EG20T PCH/OKI SEMICONDUCTOR IOH(ML7213/ML7223) PHUB");
+MODULE_DESCRIPTION("Intel EG20T PCH/LAPIS Semiconductor IOH(ML7213/ML7223) PHUB");
MODULE_LICENSE("GPL");
}
module_exit(spear_pcie_gadget_exit);
-MODULE_ALIAS("pcie-gadget-spear");
+MODULE_ALIAS("platform:pcie-gadget-spear");
MODULE_AUTHOR("Pratyush Anand");
MODULE_LICENSE("GPL");
/* VENDOR SPEC register */
#define SDHCI_VENDOR_SPEC 0xC0
#define SDHCI_VENDOR_SPEC_SDIO_QUIRK 0x00000002
+#define SDHCI_WTMK_LVL 0x44
#define SDHCI_MIX_CTRL 0x48
/*
if (is_imx53_esdhc(imx_data))
imx_data->flags |= ESDHC_FLAG_MULTIBLK_NO_INT;
+ /*
+ * The imx6q ROM code will change the default watermark level setting
+ * to something insane. Change it back here.
+ */
+ if (is_imx6q_usdhc(imx_data))
+ writel(0x08100810, host->ioaddr + SDHCI_WTMK_LVL);
+
boarddata = &imx_data->boarddata;
if (sdhci_esdhc_imx_probe_dt(pdev, boarddata) < 0) {
if (!host->mmc->parent->platform_data) {
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <linux/mtd/map.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
source "drivers/net/fddi/Kconfig"
+source "drivers/net/hippi/Kconfig"
+
config NET_SB1000
tristate "General Instruments Surfboard 1000"
depends on PNP
goto out;
}
+ if (bond->slave_cnt > 0) {
+ pr_err("unable to update mode of %s because it has slaves.\n",
+ bond->dev->name);
+ ret = -EPERM;
+ goto out;
+ }
+
new_value = bond_parse_parm(buf, bond_mode_tbl);
if (new_value < 0) {
pr_err("%s: Ignoring invalid mode value %.*s.\n",
int bnx2x_init_firmware(struct bnx2x *bp)
{
- const char *fw_file_name;
struct bnx2x_fw_file_hdr *fw_hdr;
int rc;
- if (CHIP_IS_E1(bp))
- fw_file_name = FW_FILE_NAME_E1;
- else if (CHIP_IS_E1H(bp))
- fw_file_name = FW_FILE_NAME_E1H;
- else if (!CHIP_IS_E1x(bp))
- fw_file_name = FW_FILE_NAME_E2;
- else {
- BNX2X_ERR("Unsupported chip revision\n");
- return -EINVAL;
- }
- BNX2X_DEV_INFO("Loading %s\n", fw_file_name);
+ if (!bp->firmware) {
+ const char *fw_file_name;
- rc = request_firmware(&bp->firmware, fw_file_name, &bp->pdev->dev);
- if (rc) {
- BNX2X_ERR("Can't load firmware file %s\n", fw_file_name);
- goto request_firmware_exit;
- }
+ if (CHIP_IS_E1(bp))
+ fw_file_name = FW_FILE_NAME_E1;
+ else if (CHIP_IS_E1H(bp))
+ fw_file_name = FW_FILE_NAME_E1H;
+ else if (!CHIP_IS_E1x(bp))
+ fw_file_name = FW_FILE_NAME_E2;
+ else {
+ BNX2X_ERR("Unsupported chip revision\n");
+ return -EINVAL;
+ }
+ BNX2X_DEV_INFO("Loading %s\n", fw_file_name);
- rc = bnx2x_check_firmware(bp);
- if (rc) {
- BNX2X_ERR("Corrupt firmware file %s\n", fw_file_name);
- goto request_firmware_exit;
+ rc = request_firmware(&bp->firmware, fw_file_name,
+ &bp->pdev->dev);
+ if (rc) {
+ BNX2X_ERR("Can't load firmware file %s\n",
+ fw_file_name);
+ goto request_firmware_exit;
+ }
+
+ rc = bnx2x_check_firmware(bp);
+ if (rc) {
+ BNX2X_ERR("Corrupt firmware file %s\n", fw_file_name);
+ goto request_firmware_exit;
+ }
}
fw_hdr = (struct bnx2x_fw_file_hdr *)bp->firmware->data;
kfree(bp->init_ops);
kfree(bp->init_data);
release_firmware(bp->firmware);
+ bp->firmware = NULL;
}
if (bp->doorbells)
iounmap(bp->doorbells);
+ bnx2x_release_firmware(bp);
+
bnx2x_free_mem_bp(bp);
free_netdev(dev);
rc = drv->init_fw(bp);
if (rc) {
BNX2X_ERR("Error loading firmware\n");
- goto fw_init_err;
+ goto init_err;
}
/* Handle the beginning of COMMON_XXX pases separatelly... */
case FW_MSG_CODE_DRV_LOAD_COMMON_CHIP:
rc = bnx2x_func_init_cmn_chip(bp, drv);
if (rc)
- goto init_hw_err;
+ goto init_err;
break;
case FW_MSG_CODE_DRV_LOAD_COMMON:
rc = bnx2x_func_init_cmn(bp, drv);
if (rc)
- goto init_hw_err;
+ goto init_err;
break;
case FW_MSG_CODE_DRV_LOAD_PORT:
rc = bnx2x_func_init_port(bp, drv);
if (rc)
- goto init_hw_err;
+ goto init_err;
break;
case FW_MSG_CODE_DRV_LOAD_FUNCTION:
rc = bnx2x_func_init_func(bp, drv);
if (rc)
- goto init_hw_err;
+ goto init_err;
break;
default:
rc = -EINVAL;
}
-init_hw_err:
- drv->release_fw(bp);
-
-fw_init_err:
+init_err:
drv->gunzip_end(bp);
/* In case of success, complete the comand immediatelly: no ramrods
config NET_ATMEL
bool "Atmel devices"
+ default y
depends on HAVE_NET_MACB || (ARM && ARCH_AT91RM9200)
---help---
If you have a network (Ethernet) card belonging to this class, say Y.
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/io.h>
+#include <linux/dma-mapping.h>
+#include <linux/module.h>
#include <asm/checksum.h>
#include "sky2.h"
#define DRV_NAME "sky2"
-#define DRV_VERSION "1.29"
+#define DRV_VERSION "1.30"
/*
* The Yukon II chipset takes 64 bit command blocks (called list elements)
#define MAX_SKB_TX_LE (2 + (sizeof(dma_addr_t)/sizeof(u32))*(MAX_SKB_FRAGS+1))
#define TX_MIN_PENDING (MAX_SKB_TX_LE+1)
#define TX_MAX_PENDING 1024
-#define TX_DEF_PENDING 127
+#define TX_DEF_PENDING 63
#define TX_WATCHDOG (5 * HZ)
#define NAPI_WEIGHT 64
/* block receiver */
sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
+ sky2_read32(hw, B0_CTST);
}
static void sky2_set_tx_stfwd(struct sky2_hw *hw, unsigned port)
? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM);
}
+/*
+ * Fixed initial key as seed to RSS.
+ */
+static const uint32_t rss_init_key[10] = {
+ 0x7c3351da, 0x51c5cf4e, 0x44adbdd1, 0xe8d38d18, 0x48897c43,
+ 0xb1d60e7e, 0x6a3dd760, 0x01a2e453, 0x16f46f13, 0x1a0e7b30
+};
+
/* Enable/disable receive hash calculation (RSS) */
static void rx_set_rss(struct net_device *dev, u32 features)
{
/* Program RSS initial values */
if (features & NETIF_F_RXHASH) {
- u32 key[nkeys];
-
- get_random_bytes(key, nkeys * sizeof(u32));
for (i = 0; i < nkeys; i++)
sky2_write32(hw, SK_REG(sky2->port, RSS_KEY + i * 4),
- key[i]);
+ rss_init_key[i]);
/* Need to turn on (undocumented) flag to make hashing work */
sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T),
if (err)
dev_err(&pdev->dev, "cannot assign irq %d\n", pdev->irq);
else {
+ hw->flags |= SKY2_HW_IRQ_SETUP;
+
napi_enable(&hw->napi);
sky2_write32(hw, B0_IMSK, Y2_IS_BASE);
sky2_read32(hw, B0_IMSK);
/* Bring up network interface. */
-static int sky2_up(struct net_device *dev)
+static int sky2_open(struct net_device *dev)
{
struct sky2_port *sky2 = netdev_priv(dev);
struct sky2_hw *hw = sky2->hw;
sky2_hw_up(sky2);
+ if (hw->chip_id == CHIP_ID_YUKON_OPT ||
+ hw->chip_id == CHIP_ID_YUKON_PRM ||
+ hw->chip_id == CHIP_ID_YUKON_OP_2)
+ imask |= Y2_IS_PHY_QLNK; /* enable PHY Quick Link */
+
/* Enable interrupts from phy/mac for port */
imask = sky2_read32(hw, B0_IMSK);
imask |= portirq_msk[port];
sky2_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL), RB_RST_SET);
sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_SET);
+
+ sky2_read32(hw, B0_CTST);
}
static void sky2_hw_down(struct sky2_port *sky2)
}
/* Network shutdown */
-static int sky2_down(struct net_device *dev)
+static int sky2_close(struct net_device *dev)
{
struct sky2_port *sky2 = netdev_priv(dev);
struct sky2_hw *hw = sky2->hw;
netif_info(sky2, ifdown, dev, "disabling interface\n");
- /* Disable port IRQ */
- sky2_write32(hw, B0_IMSK,
- sky2_read32(hw, B0_IMSK) & ~portirq_msk[sky2->port]);
- sky2_read32(hw, B0_IMSK);
-
if (hw->ports == 1) {
+ sky2_write32(hw, B0_IMSK, 0);
+ sky2_read32(hw, B0_IMSK);
+
napi_disable(&hw->napi);
free_irq(hw->pdev->irq, hw);
+ hw->flags &= ~SKY2_HW_IRQ_SETUP;
} else {
+ u32 imask;
+
+ /* Disable port IRQ */
+ imask = sky2_read32(hw, B0_IMSK);
+ imask &= ~portirq_msk[sky2->port];
+ sky2_write32(hw, B0_IMSK, imask);
+ sky2_read32(hw, B0_IMSK);
+
synchronize_irq(hw->pdev->irq);
napi_synchronize(&hw->napi);
}
if (netif_running(dev)) {
sky2_tx_complete(sky2, last);
- /* Wake unless it's detached, and called e.g. from sky2_down() */
+ /* Wake unless it's detached, and called e.g. from sky2_close() */
if (tx_avail(sky2) > MAX_SKB_TX_LE + 4)
netif_wake_queue(dev);
}
hw->chip_id == CHIP_ID_YUKON_PRM ||
hw->chip_id == CHIP_ID_YUKON_OP_2) {
u16 reg;
- u32 msk;
if (hw->chip_id == CHIP_ID_YUKON_OPT && hw->chip_rev == 0) {
/* disable PCI-E PHY power down (set PHY reg 0x80, bit 7 */
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
sky2_pci_write16(hw, PSM_CONFIG_REG4, reg);
- /* enable PHY Quick Link */
- msk = sky2_read32(hw, B0_IMSK);
- msk |= Y2_IS_PHY_QLNK;
- sky2_write32(hw, B0_IMSK, msk);
-
/* check if PSMv2 was running before */
reg = sky2_pci_read16(hw, PSM_CONFIG_REG3);
if (reg & PCI_EXP_LNKCTL_ASPMC)
netif_tx_lock(dev);
netif_device_detach(dev); /* stop txq */
netif_tx_unlock(dev);
- sky2_down(dev);
+ sky2_close(dev);
}
}
int err = 0;
if (netif_running(dev)) {
- err = sky2_up(dev);
+ err = sky2_open(dev);
if (err) {
netdev_info(dev, "could not restart %d\n", err);
dev_close(dev);
{
int i;
- sky2_read32(hw, B0_IMSK);
- sky2_write32(hw, B0_IMSK, 0);
- synchronize_irq(hw->pdev->irq);
- napi_disable(&hw->napi);
+ if (hw->flags & SKY2_HW_IRQ_SETUP) {
+ sky2_read32(hw, B0_IMSK);
+ sky2_write32(hw, B0_IMSK, 0);
+
+ synchronize_irq(hw->pdev->irq);
+ napi_disable(&hw->napi);
+ }
for (i = 0; i < hw->ports; i++) {
struct net_device *dev = hw->dev[i];
netif_wake_queue(dev);
}
- sky2_write32(hw, B0_IMSK, imask);
- sky2_read32(hw, B0_IMSK);
-
- sky2_read32(hw, B0_Y2_SP_LISR);
- napi_enable(&hw->napi);
+ if (hw->flags & SKY2_HW_IRQ_SETUP) {
+ sky2_write32(hw, B0_IMSK, imask);
+ sky2_read32(hw, B0_IMSK);
+ sky2_read32(hw, B0_Y2_SP_LISR);
+ napi_enable(&hw->napi);
+ }
}
static void sky2_restart(struct work_struct *work)
return 0;
}
+/*
+ * Hardware is limited to min of 128 and max of 2048 for ring size
+ * and rounded up to next power of two
+ * to avoid division in modulus calclation
+ */
+static unsigned long roundup_ring_size(unsigned long pending)
+{
+ return max(128ul, roundup_pow_of_two(pending+1));
+}
+
static void sky2_get_ringparam(struct net_device *dev,
struct ethtool_ringparam *ering)
{
sky2->rx_pending = ering->rx_pending;
sky2->tx_pending = ering->tx_pending;
- sky2->tx_ring_size = roundup_pow_of_two(sky2->tx_pending+1);
+ sky2->tx_ring_size = roundup_ring_size(sky2->tx_pending);
return sky2_reattach(dev);
}
struct net_device *dev = ptr;
struct sky2_port *sky2 = netdev_priv(dev);
- if (dev->netdev_ops->ndo_open != sky2_up || !sky2_debug)
+ if (dev->netdev_ops->ndo_open != sky2_open || !sky2_debug)
return NOTIFY_DONE;
switch (event) {
not allowing netpoll on second port */
static const struct net_device_ops sky2_netdev_ops[2] = {
{
- .ndo_open = sky2_up,
- .ndo_stop = sky2_down,
+ .ndo_open = sky2_open,
+ .ndo_stop = sky2_close,
.ndo_start_xmit = sky2_xmit_frame,
.ndo_do_ioctl = sky2_ioctl,
.ndo_validate_addr = eth_validate_addr,
#endif
},
{
- .ndo_open = sky2_up,
- .ndo_stop = sky2_down,
+ .ndo_open = sky2_open,
+ .ndo_stop = sky2_close,
.ndo_start_xmit = sky2_xmit_frame,
.ndo_do_ioctl = sky2_ioctl,
.ndo_validate_addr = eth_validate_addr,
spin_lock_init(&sky2->phy_lock);
sky2->tx_pending = TX_DEF_PENDING;
- sky2->tx_ring_size = roundup_pow_of_two(TX_DEF_PENDING+1);
+ sky2->tx_ring_size = roundup_ring_size(TX_DEF_PENDING);
sky2->rx_pending = RX_DEF_PENDING;
hw->dev[port] = dev;
#define SKY2_HW_RSS_BROKEN 0x00000100
#define SKY2_HW_VLAN_BROKEN 0x00000200
#define SKY2_HW_RSS_CHKSUM 0x00000400 /* RSS requires chksum */
+#define SKY2_HW_IRQ_SETUP 0x00000800
u8 chip_id;
u8 chip_rev;
* Packet is OK - process it.
*/
length = be32_to_cpu(cqe->byte_cnt);
+ length -= ring->fcs_del;
ring->bytes += length;
ring->packets++;
context->db_rec_addr = cpu_to_be64(ring->wqres.db.dma);
/* Cancel FCS removal if FW allows */
- if (mdev->dev->caps.flags & MLX4_DEV_CAP_FLAG_FCS_KEEP)
+ if (mdev->dev->caps.flags & MLX4_DEV_CAP_FLAG_FCS_KEEP) {
context->param3 |= cpu_to_be32(1 << 29);
+ ring->fcs_del = ETH_FCS_LEN;
+ } else
+ ring->fcs_del = 0;
err = mlx4_qp_to_ready(mdev->dev, &ring->wqres.mtt, context, qp, state);
if (err) {
u32 prod;
u32 cons;
u32 buf_size;
+ u8 fcs_del;
void *buf;
void *rx_info;
unsigned long bytes;
};
static const struct nv_ethtool_str nv_estats_str[] = {
- { "tx_bytes" },
+ { "tx_bytes" }, /* includes Ethernet FCS CRC */
{ "tx_zero_rexmt" },
{ "tx_one_rexmt" },
{ "tx_many_rexmt" },
/* version 2 stats */
{ "tx_deferral" },
{ "tx_packets" },
- { "rx_bytes" },
+ { "rx_bytes" }, /* includes Ethernet FCS CRC */
{ "tx_pause" },
{ "rx_pause" },
{ "rx_drop_frame" },
};
struct nv_ethtool_stats {
- u64 tx_bytes;
+ u64 tx_bytes; /* should be ifconfig->tx_bytes + 4*tx_packets */
u64 tx_zero_rexmt;
u64 tx_one_rexmt;
u64 tx_many_rexmt;
u64 rx_unicast;
u64 rx_multicast;
u64 rx_broadcast;
- u64 rx_packets;
+ u64 rx_packets; /* should be ifconfig->rx_packets */
u64 rx_errors_total;
u64 tx_errors_total;
/* version 2 stats */
u64 tx_deferral;
- u64 tx_packets;
- u64 rx_bytes;
+ u64 tx_packets; /* should be ifconfig->tx_packets */
+ u64 rx_bytes; /* should be ifconfig->rx_bytes + 4*rx_packets */
u64 tx_pause;
u64 rx_pause;
u64 rx_drop_frame;
if (np->driver_data & (DEV_HAS_STATISTICS_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_STATISTICS_V3)) {
nv_get_hw_stats(dev);
+ /*
+ * Note: because HW stats are not always available and
+ * for consistency reasons, the following ifconfig
+ * stats are managed by software: rx_bytes, tx_bytes,
+ * rx_packets and tx_packets. The related hardware
+ * stats reported by ethtool should be equivalent to
+ * these ifconfig stats, with 4 additional bytes per
+ * packet (Ethernet FCS CRC).
+ */
+
/* copy to net_device stats */
- dev->stats.tx_packets = np->estats.tx_packets;
- dev->stats.rx_bytes = np->estats.rx_bytes;
- dev->stats.tx_bytes = np->estats.tx_bytes;
dev->stats.tx_fifo_errors = np->estats.tx_fifo_errors;
dev->stats.tx_carrier_errors = np->estats.tx_carrier_errors;
dev->stats.rx_crc_errors = np->estats.rx_crc_errors;
if (flags & NV_TX_ERROR) {
if ((flags & NV_TX_RETRYERROR) && !(flags & NV_TX_RETRYCOUNT_MASK))
nv_legacybackoff_reseed(dev);
+ } else {
+ dev->stats.tx_packets++;
+ dev->stats.tx_bytes += np->get_tx_ctx->skb->len;
}
dev_kfree_skb_any(np->get_tx_ctx->skb);
np->get_tx_ctx->skb = NULL;
if (flags & NV_TX2_ERROR) {
if ((flags & NV_TX2_RETRYERROR) && !(flags & NV_TX2_RETRYCOUNT_MASK))
nv_legacybackoff_reseed(dev);
+ } else {
+ dev->stats.tx_packets++;
+ dev->stats.tx_bytes += np->get_tx_ctx->skb->len;
}
dev_kfree_skb_any(np->get_tx_ctx->skb);
np->get_tx_ctx->skb = NULL;
else
nv_legacybackoff_reseed(dev);
}
+ } else {
+ dev->stats.tx_packets++;
+ dev->stats.tx_bytes += np->get_tx_ctx->skb->len;
}
dev_kfree_skb_any(np->get_tx_ctx->skb);
skb->protocol = eth_type_trans(skb, dev);
napi_gro_receive(&np->napi, skb);
dev->stats.rx_packets++;
+ dev->stats.rx_bytes += len;
next_pkt:
if (unlikely(np->get_rx.orig++ == np->last_rx.orig))
np->get_rx.orig = np->first_rx.orig;
}
napi_gro_receive(&np->napi, skb);
dev->stats.rx_packets++;
+ dev->stats.rx_bytes += len;
} else {
dev_kfree_skb(skb);
}
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
*/
-#include <linux/module.h> /* for __MODULE_STRING */
#include "pch_gbe.h"
+#include <linux/module.h> /* for __MODULE_STRING */
#define OPTION_UNSET -1
#define OPTION_DISABLED 0
iowrite16(lp->mcr0, ioaddr + MCR0);
/* Fill the MAC hash tables with their values */
- if (lp->mcr0 && MCR0_HASH_EN) {
+ if (lp->mcr0 & MCR0_HASH_EN) {
iowrite16(hash_table[0], ioaddr + MAR0);
iowrite16(hash_table[1], ioaddr + MAR1);
iowrite16(hash_table[2], ioaddr + MAR2);
netif_carrier_off(dev);
netif_info(tp, ifdown, dev, "link down\n");
if (pm)
- pm_schedule_suspend(&tp->pci_dev->dev, 100);
+ pm_schedule_suspend(&tp->pci_dev->dev, 5000);
}
spin_unlock_irqrestore(&tp->lock, flags);
}
{
struct smsc911x_data *pdata = netdev_priv(dev);
unsigned int byte_test;
+ unsigned int to = 100;
SMSC_TRACE(pdata, probe, "Driver Parameters:");
SMSC_TRACE(pdata, probe, "LAN base: 0x%08lX",
return -ENODEV;
}
+ /*
+ * poll the READY bit in PMT_CTRL. Any other access to the device is
+ * forbidden while this bit isn't set. Try for 100ms
+ */
+ while (!(smsc911x_reg_read(pdata, PMT_CTRL) & PMT_CTRL_READY_) && --to)
+ udelay(1000);
+ if (to == 0) {
+ pr_err("Device not READY in 100ms aborting\n");
+ return -ENODEV;
+ }
+
/* Check byte ordering */
byte_test = smsc911x_reg_read(pdata, BYTE_TEST);
SMSC_TRACE(pdata, probe, "BYTE_TEST: 0x%08X", byte_test);
/* DMA SW reset */
value |= DMA_BUS_MODE_SFT_RESET;
writel(value, ioaddr + DMA_BUS_MODE);
- limit = 15000;
+ limit = 10;
while (limit--) {
if (!(readl(ioaddr + DMA_BUS_MODE) & DMA_BUS_MODE_SFT_RESET))
break;
+ mdelay(10);
}
if (limit < 0)
return -EBUSY;
/* DMA SW reset */
value |= DMA_BUS_MODE_SFT_RESET;
writel(value, ioaddr + DMA_BUS_MODE);
- limit = 15000;
+ limit = 10;
while (limit--) {
if (!(readl(ioaddr + DMA_BUS_MODE) & DMA_BUS_MODE_SFT_RESET))
break;
+ mdelay(10);
}
if (limit < 0)
return -EBUSY;
spinlock_t lock;
spinlock_t tx_lock;
int wolopts;
- int wolenabled;
int wol_irq;
#ifdef CONFIG_STMMAC_TIMER
struct stmmac_timer *tm;
struct plat_stmmacenet_data *plat;
struct stmmac_counters mmc;
struct dma_features dma_cap;
+ int hw_cap_support;
};
extern int stmmac_mdio_unregister(struct net_device *ndev);
struct stmmac_priv *priv = netdev_priv(dev);
u32 support = WAKE_MAGIC | WAKE_UCAST;
+ /* By default almost all GMAC devices support the WoL via
+ * magic frame but we can disable it if the HW capability
+ * register shows no support for pmt_magic_frame. */
+ if ((priv->hw_cap_support) && (!priv->dma_cap.pmt_magic_frame))
+ wol->wolopts &= ~WAKE_MAGIC;
+
if (!device_can_wakeup(priv->device))
return -EINVAL;
}
/* Stop Advertising 1000BASE Capability if interface is not GMII */
- if ((interface) && ((interface == PHY_INTERFACE_MODE_MII) ||
- (interface == PHY_INTERFACE_MODE_RMII))) {
- phydev->supported &= (PHY_BASIC_FEATURES | SUPPORTED_Pause |
- SUPPORTED_Asym_Pause);
- phydev->advertising = phydev->supported;
- }
+ if ((interface == PHY_INTERFACE_MODE_MII) ||
+ (interface == PHY_INTERFACE_MODE_RMII))
+ phydev->advertising &= ~(SUPPORTED_1000baseT_Half |
+ SUPPORTED_1000baseT_Full);
/*
* Broken HW is sometimes missing the pull-up resistor on the
return 0;
}
-/* New GMAC chips support a new register to indicate the
- * presence of the optional feature/functions.
+/**
+ * stmmac_selec_desc_mode
+ * @dev : device pointer
+ * Description: select the Enhanced/Alternate or Normal descriptors */
+static void stmmac_selec_desc_mode(struct stmmac_priv *priv)
+{
+ if (priv->plat->enh_desc) {
+ pr_info(" Enhanced/Alternate descriptors\n");
+ priv->hw->desc = &enh_desc_ops;
+ } else {
+ pr_info(" Normal descriptors\n");
+ priv->hw->desc = &ndesc_ops;
+ }
+}
+
+/**
+ * stmmac_get_hw_features
+ * @priv : private device pointer
+ * Description:
+ * new GMAC chip generations have a new register to indicate the
+ * presence of the optional feature/functions.
+ * This can be also used to override the value passed through the
+ * platform and necessary for old MAC10/100 and GMAC chips.
*/
static int stmmac_get_hw_features(struct stmmac_priv *priv)
{
(hw_cap & DMA_HW_FEAT_RWKSEL) >> 9;
priv->dma_cap.pmt_magic_frame =
(hw_cap & DMA_HW_FEAT_MGKSEL) >> 10;
- /*MMC*/
+ /* MMC */
priv->dma_cap.rmon = (hw_cap & DMA_HW_FEAT_MMCSEL) >> 11;
/* IEEE 1588-2002*/
priv->dma_cap.time_stamp =
priv->dma_cap.enh_desc =
(hw_cap & DMA_HW_FEAT_ENHDESSEL) >> 24;
- } else
- pr_debug("\tNo HW DMA feature register supported");
+ }
return hw_cap;
}
goto open_error;
}
+ stmmac_get_synopsys_id(priv);
+
+ priv->hw_cap_support = stmmac_get_hw_features(priv);
+
+ if (priv->hw_cap_support) {
+ pr_info(" Support DMA HW capability register");
+
+ /* We can override some gmac/dma configuration fields: e.g.
+ * enh_desc, tx_coe (e.g. that are passed through the
+ * platform) with the values from the HW capability
+ * register (if supported).
+ */
+ priv->plat->enh_desc = priv->dma_cap.enh_desc;
+ priv->plat->tx_coe = priv->dma_cap.tx_coe;
+ priv->plat->pmt = priv->dma_cap.pmt_remote_wake_up;
+
+ /* By default disable wol on magic frame if not supported */
+ if (!priv->dma_cap.pmt_magic_frame)
+ priv->wolopts &= ~WAKE_MAGIC;
+
+ } else
+ pr_info(" No HW DMA feature register supported");
+
+ /* Select the enhnaced/normal descriptor structures */
+ stmmac_selec_desc_mode(priv);
+
+ /* PMT module is not integrated in all the MAC devices. */
+ if (priv->plat->pmt) {
+ pr_info(" Remote wake-up capable\n");
+ device_set_wakeup_capable(priv->device, 1);
+ }
+
+ priv->rx_coe = priv->hw->mac->rx_coe(priv->ioaddr);
+ if (priv->rx_coe)
+ pr_info(" Checksum Offload Engine supported\n");
+ if (priv->plat->tx_coe)
+ pr_info(" Checksum insertion supported\n");
+
/* Create and initialize the TX/RX descriptors chains. */
priv->dma_tx_size = STMMAC_ALIGN(dma_txsize);
priv->dma_rx_size = STMMAC_ALIGN(dma_rxsize);
/* Initialize the MAC Core */
priv->hw->mac->core_init(priv->ioaddr);
- stmmac_get_synopsys_id(priv);
-
- stmmac_get_hw_features(priv);
-
- priv->rx_coe = priv->hw->mac->rx_coe(priv->ioaddr);
- if (priv->rx_coe)
- pr_info("stmmac: Rx Checksum Offload Engine supported\n");
- if (priv->plat->tx_coe)
- pr_info("\tTX Checksum insertion supported\n");
netdev_update_features(dev);
/* Request the IRQ lines */
if (!priv->phydev)
return -EINVAL;
- spin_lock(&priv->lock);
ret = phy_mii_ioctl(priv->phydev, rq, cmd);
- spin_unlock(&priv->lock);
return ret;
}
struct net_device *dev = seq->private;
struct stmmac_priv *priv = netdev_priv(dev);
- if (!stmmac_get_hw_features(priv)) {
+ if (!priv->hw_cap_support) {
seq_printf(seq, "DMA HW features not supported\n");
return 0;
}
if (!device)
return -ENOMEM;
- if (priv->plat->enh_desc) {
- device->desc = &enh_desc_ops;
- pr_info("\tEnhanced descriptor structure\n");
- } else
- device->desc = &ndesc_ops;
-
priv->hw = device;
priv->hw->ring = &ring_mode_ops;
priv->ioaddr = addr;
- /* PMT module is not integrated in all the MAC devices. */
- if (plat_dat->pmt) {
- pr_info("\tPMT module supported\n");
- device_set_wakeup_capable(&pdev->dev, 1);
- }
/*
* On some platforms e.g. SPEAr the wake up irq differs from the mac irq
* The external wake up irq can be passed through the platform code
if (priv->wol_irq == -ENXIO)
priv->wol_irq = ndev->irq;
-
platform_set_drvdata(pdev, ndev);
/* Set the I/O base addr */
goto out_free_ndev;
}
- /* MAC HW revice detection */
+ /* MAC HW device detection */
ret = stmmac_mac_device_setup(ndev);
if (ret < 0)
goto out_plat_exit;
if (!ndev || !netif_running(ndev))
return 0;
+ if (priv->phydev)
+ phy_stop(priv->phydev);
+
spin_lock(&priv->lock);
netif_device_detach(ndev);
netif_stop_queue(ndev);
- if (priv->phydev)
- phy_stop(priv->phydev);
#ifdef CONFIG_STMMAC_TIMER
priv->tm->timer_stop();
#endif
napi_enable(&priv->napi);
- if (priv->phydev)
- phy_start(priv->phydev);
-
netif_start_queue(ndev);
spin_unlock(&priv->lock);
+
+ if (priv->phydev)
+ phy_start(priv->phydev);
+
return 0;
}
sbus_dp = op->dev.parent->of_node;
/* We can match PCI devices too, do not accept those here. */
- if (strcmp(sbus_dp->name, "sbus"))
+ if (strcmp(sbus_dp->name, "sbus") && strcmp(sbus_dp->name, "sbi"))
return err;
if (is_qfe) {
return;
temac_iow(lp, XTE_LSW0_OFFSET, value);
temac_iow(lp, XTE_CTL0_OFFSET, CNTLREG_WRITE_ENABLE_MASK | reg);
+ temac_indirect_busywait(lp);
}
/**
struct temac_local *lp = netdev_priv(ndev);
int i;
+ /* Reset Local Link (DMA) */
+ lp->dma_out(lp, DMA_CONTROL_REG, DMA_CONTROL_RST);
+
for (i = 0; i < RX_BD_NUM; i++) {
if (!lp->rx_skb[i])
break;
phy_start(lp->phy_dev);
}
+ temac_device_reset(ndev);
+
rc = request_irq(lp->tx_irq, ll_temac_tx_irq, 0, ndev->name, ndev);
if (rc)
goto err_tx_irq;
if (rc)
goto err_rx_irq;
- temac_device_reset(ndev);
return 0;
err_rx_irq:
kernel code or by user space programs. Say Y here only if you have
the memory.
-endif /* HIPPI */
+endif # HIPPI
#include <linux/usb/usbnet.h>
#include <linux/slab.h>
-#define DRIVER_VERSION "26-Sep-2011"
+#define DRIVER_VERSION "08-Nov-2011"
#define DRIVER_NAME "asix"
/* ASIX AX8817X based USB 2.0 Ethernet Devices */
#define MARVELL_CTRL_TXDELAY 0x0002
#define MARVELL_CTRL_RXDELAY 0x0080
-#define PHY_MODE_RTL8211CL 0x0004
+#define PHY_MODE_RTL8211CL 0x000C
/* This structure cannot exceed sizeof(unsigned long [5]) AKA 20 bytes */
struct asix_data {
{
int phy_reg;
u32 phy_id;
+ int i;
- phy_reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID1);
- if (phy_reg < 0)
+ /* Poll for the rare case the FW or phy isn't ready yet. */
+ for (i = 0; i < 100; i++) {
+ phy_reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID1);
+ if (phy_reg != 0 && phy_reg != 0xFFFF)
+ break;
+ mdelay(1);
+ }
+
+ if (phy_reg <= 0 || phy_reg == 0xFFFF)
return 0;
phy_id = (phy_reg & 0xffff) << 16;
static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
{
- int ret;
+ int ret, embd_phy;
struct asix_data *data = (struct asix_data *)&dev->data;
u8 buf[ETH_ALEN];
u32 phyid;
dev->mii.reg_num_mask = 0x1f;
dev->mii.phy_id = asix_get_phy_addr(dev);
- phyid = asix_get_phyid(dev);
- dbg("PHYID=0x%08x", phyid);
-
dev->net->netdev_ops = &ax88772_netdev_ops;
dev->net->ethtool_ops = &ax88772_ethtool_ops;
- ret = ax88772_reset(dev);
+ embd_phy = ((dev->mii.phy_id & 0x1f) == 0x10 ? 1 : 0);
+
+ /* Reset the PHY to normal operation mode */
+ ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, embd_phy, 0, 0, NULL);
+ if (ret < 0) {
+ dbg("Select PHY #1 failed: %d", ret);
+ return ret;
+ }
+
+ ret = asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_PRL);
+ if (ret < 0)
+ return ret;
+
+ msleep(150);
+
+ ret = asix_sw_reset(dev, AX_SWRESET_CLEAR);
if (ret < 0)
return ret;
+ msleep(150);
+
+ ret = asix_sw_reset(dev, embd_phy ? AX_SWRESET_IPRL : AX_SWRESET_PRTE);
+
+ /* Read PHYID register *AFTER* the PHY was reset properly */
+ phyid = asix_get_phyid(dev);
+ dbg("PHYID=0x%08x", phyid);
+
/* Asix framing packs multiple eth frames into a 2K usb bulk transfer */
if (dev->driver_info->flags & FLAG_FRAMING_AX) {
/* hard_mtu is still the default - the device does not support
__le16 eeprom;
u8 status;
int gpio0 = 0;
+ u32 phyid;
asix_read_cmd(dev, AX_CMD_READ_GPIOS, 0, 0, 1, &status);
dbg("GPIO Status: 0x%04x", status);
data->ledmode = 0;
gpio0 = 1;
} else {
- data->phymode = le16_to_cpu(eeprom) & 7;
+ data->phymode = le16_to_cpu(eeprom) & 0x7F;
data->ledmode = le16_to_cpu(eeprom) >> 8;
gpio0 = (le16_to_cpu(eeprom) & 0x80) ? 0 : 1;
}
dbg("GPIO0: %d, PhyMode: %d", gpio0, data->phymode);
+ /* Power up external GigaPHY through AX88178 GPIO pin */
asix_write_gpio(dev, AX_GPIO_RSE | AX_GPIO_GPO_1 | AX_GPIO_GPO1EN, 40);
if ((le16_to_cpu(eeprom) >> 8) != 1) {
asix_write_gpio(dev, 0x003c, 30);
asix_write_gpio(dev, AX_GPIO_GPO1EN | AX_GPIO_GPO_1, 30);
}
+ /* Read PHYID register *AFTER* powering up PHY */
+ phyid = asix_get_phyid(dev);
+ dbg("PHYID=0x%08x", phyid);
+
+ /* Set AX88178 to enable MII/GMII/RGMII interface for external PHY */
+ asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, 0, 0, 0, NULL);
+
asix_sw_reset(dev, 0);
msleep(150);
{
int ret;
u8 buf[ETH_ALEN];
- u32 phyid;
struct asix_data *data = (struct asix_data *)&dev->data;
data->eeprom_len = AX88772_EEPROM_LEN;
dev->net->netdev_ops = &ax88178_netdev_ops;
dev->net->ethtool_ops = &ax88178_ethtool_ops;
- phyid = asix_get_phyid(dev);
- dbg("PHYID=0x%08x", phyid);
+ /* Blink LEDS so users know driver saw dongle */
+ asix_sw_reset(dev, 0);
+ msleep(150);
- ret = ax88178_reset(dev);
- if (ret < 0)
- return ret;
+ asix_sw_reset(dev, AX_SWRESET_PRL | AX_SWRESET_IPPD);
+ msleep(150);
/* Asix framing packs multiple eth frames into a 2K usb bulk transfer */
if (dev->driver_info->flags & FLAG_FRAMING_AX) {
{
USB_DEVICE_AND_INTERFACE_INFO(0x1004, 0x61aa, USB_CLASS_COMM,
USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
- .driver_info = (unsigned long)&wwan_info,
+ .driver_info = 0,
},
/*
}
frame = (struct vl600_frame_hdr *) buf->data;
- /* NOTE: Should check that frame->magic == 0x53544448?
- * Otherwise if we receive garbage at the beginning of the frame
- * we may end up allocating a huge buffer and saving all the
- * future incoming data into it. */
+ /* Yes, check that frame->magic == 0x53544448 (or 0x44544d48),
+ * otherwise we may run out of memory w/a bad packet */
+ if (ntohl(frame->magic) != 0x53544448 &&
+ ntohl(frame->magic) != 0x44544d48)
+ goto error;
if (buf->len < sizeof(*frame) ||
buf->len != le32_to_cpup(&frame->len)) {
* overwrite the remaining fields.
*/
packet = (struct vl600_pkt_hdr *) skb->data;
+ /* The VL600 wants IPv6 packets to have an IPv4 ethertype
+ * Since this modem only supports IPv4 and IPv6, just set all
+ * frames to 0x0800 (ETH_P_IP)
+ */
+ packet->h_proto = htons(ETH_P_IP);
memset(&packet->dummy, 0, sizeof(packet->dummy));
packet->len = cpu_to_le32(orig_len);
if (skb->len < full_len) /* Pad */
skb_put(skb, full_len - skb->len);
- /* The VL600 wants IPv6 packets to have an IPv4 ethertype
- * Check if this is an IPv6 packet, and set the ethertype
- * to 0x800
- */
- if ((skb->data[sizeof(struct vl600_pkt_hdr *) + 0x22] & 0xf0) == 0x60) {
- skb->data[sizeof(struct vl600_pkt_hdr *) + 0x20] = 0x08;
- skb->data[sizeof(struct vl600_pkt_hdr *) + 0x21] = 0;
- }
-
return skb;
}
static const struct driver_info vl600_info = {
.description = "LG VL600 modem",
- .flags = FLAG_ETHER | FLAG_RX_ASSEMBLE,
+ .flags = FLAG_RX_ASSEMBLE | FLAG_WWAN,
.bind = vl600_bind,
.unbind = vl600_unbind,
.status = usbnet_cdc_status,
#define USB_VENDOR_ID_SMSC (0x0424)
#define USB_PRODUCT_ID_LAN7500 (0x7500)
#define USB_PRODUCT_ID_LAN7505 (0x7505)
+#define RXW_PADDING 2
#define check_warn(ret, fmt, args...) \
({ if (ret < 0) netdev_warn(dev->net, fmt, ##args); })
memcpy(&rx_cmd_b, skb->data, sizeof(rx_cmd_b));
le32_to_cpus(&rx_cmd_b);
- skb_pull(skb, 4 + NET_IP_ALIGN);
+ skb_pull(skb, 4 + RXW_PADDING);
packet = skb->data;
/* get the packet length */
- size = (rx_cmd_a & RX_CMD_A_LEN) - NET_IP_ALIGN;
- align_count = (4 - ((size + NET_IP_ALIGN) % 4)) % 4;
+ size = (rx_cmd_a & RX_CMD_A_LEN) - RXW_PADDING;
+ align_count = (4 - ((size + RXW_PADDING) % 4)) % 4;
if (unlikely(rx_cmd_a & RX_CMD_A_RED)) {
netif_dbg(dev, rx_err, dev->net,
int r;
sband = wiphy->bands[IEEE80211_BAND_2GHZ];
+ if (!sband)
+ return;
/*
* If no country IE has been received always enable active scan
}
}
+/* TODO: verify if needed for SSLPN or LCN */
static u16 b43_generate_tx_phy_ctl1(struct b43_wldev *dev, u8 bitrate)
{
const struct b43_phy *phy = &dev->phy;
unsigned int plcp_fragment_len;
u32 mac_ctl = 0;
u16 phy_ctl = 0;
+ bool fill_phy_ctl1 = (phy->type == B43_PHYTYPE_LP ||
+ phy->type == B43_PHYTYPE_N ||
+ phy->type == B43_PHYTYPE_HT);
u8 extra_ft = 0;
struct ieee80211_rate *txrate;
struct ieee80211_tx_rate *rates;
extra_ft |= B43_TXH_EFT_RTSFB_CCK;
if (rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS &&
- phy->type == B43_PHYTYPE_N) {
+ fill_phy_ctl1) {
txhdr->phy_ctl1_rts = cpu_to_le16(
b43_generate_tx_phy_ctl1(dev, rts_rate));
txhdr->phy_ctl1_rts_fb = cpu_to_le16(
break;
}
- if (phy->type == B43_PHYTYPE_N) {
+ if (fill_phy_ctl1) {
txhdr->phy_ctl1 =
cpu_to_le16(b43_generate_tx_phy_ctl1(dev, rate));
txhdr->phy_ctl1_fb =
/* Link quality statistics */
switch (chanstat & B43_RX_CHAN_PHYTYPE) {
+ case B43_PHYTYPE_HT:
+ /* TODO: is max the right choice? */
+ status.signal = max_t(__s8,
+ max(rxhdr->phy_ht_power0, rxhdr->phy_ht_power1),
+ rxhdr->phy_ht_power2);
+ break;
case B43_PHYTYPE_N:
+ /* Broadcom has code for min and avg, but always uses max */
if (rxhdr->power0 == 16 || rxhdr->power0 == 32)
status.signal = max(rxhdr->power1, rxhdr->power2);
else
} __packed;
} __packed;
union {
+ /* HT-PHY */
+ struct {
+ PAD_BYTES(1);
+ __s8 phy_ht_power0;
+ } __packed;
+
/* RSSI for N-PHYs */
struct {
__s8 power2;
__le16 phy_status2; /* PHY RX Status 2 */
} __packed;
- __le16 phy_status3; /* PHY RX Status 3 */
+ union {
+ /* HT-PHY */
+ struct {
+ __s8 phy_ht_power1;
+ __s8 phy_ht_power2;
+ } __packed;
+
+ __le16 phy_status3; /* PHY RX Status 3 */
+ } __packed;
union {
/* Tested with 598.314, 644.1001 and 666.2 */
struct {
static uint _dma_ctrlflags(struct dma_info *di, uint mask, uint flags)
{
- uint dmactrlflags = di->dma.dmactrlflags;
+ uint dmactrlflags;
if (di == NULL) {
- DMA_ERROR(("%s: _dma_ctrlflags: NULL dma handle\n", di->name));
+ DMA_ERROR(("_dma_ctrlflags: NULL dma handle\n"));
return 0;
}
+ dmactrlflags = di->dma.dmactrlflags;
dmactrlflags &= ~mask;
dmactrlflags |= flags;
return 0;
}
-static void iwl_trans_pcie_disable_sync_irq(struct iwl_trans *trans)
+static void iwl_trans_pcie_stop_device(struct iwl_trans *trans)
{
unsigned long flags;
- struct iwl_trans_pcie *trans_pcie =
- IWL_TRANS_GET_PCIE_TRANS(trans);
+ struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
+ /* tell the device to stop sending interrupts */
spin_lock_irqsave(&trans->shrd->lock, flags);
iwl_disable_interrupts(trans);
spin_unlock_irqrestore(&trans->shrd->lock, flags);
- /* wait to make sure we flush pending tasklet*/
- synchronize_irq(bus(trans)->irq);
- tasklet_kill(&trans_pcie->irq_tasklet);
-}
-
-static void iwl_trans_pcie_stop_device(struct iwl_trans *trans)
-{
- /* stop and reset the on-board processor */
- iwl_write32(bus(trans), CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
-
- /* tell the device to stop sending interrupts */
- iwl_trans_pcie_disable_sync_irq(trans);
-
/* device going down, Stop using ICT table */
iwl_disable_ict(trans);
/* Stop the device, and put it in low power state */
iwl_apm_stop(priv(trans));
+
+ /* Upon stop, the APM issues an interrupt if HW RF kill is set.
+ * Clean again the interrupt here
+ */
+ spin_lock_irqsave(&trans->shrd->lock, flags);
+ iwl_disable_interrupts(trans);
+ spin_unlock_irqrestore(&trans->shrd->lock, flags);
+
+ /* wait to make sure we flush pending tasklet*/
+ synchronize_irq(bus(trans)->irq);
+ tasklet_kill(&trans_pcie->irq_tasklet);
+
+ /* stop and reset the on-board processor */
+ iwl_write32(bus(trans), CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
}
static int iwl_trans_pcie_tx(struct iwl_trans *trans, struct sk_buff *skb,
if (channel &&
!(channel->flags & IEEE80211_CHAN_DISABLED))
cfg80211_inform_bss(wiphy, channel,
- bssid, le64_to_cpu(*(__le64 *)tsfdesc),
+ bssid, get_unaligned_le64(tsfdesc),
capa, intvl, ie, ielen,
LBS_SCAN_RSSI_TO_MBM(rssi),
GFP_KERNEL);
spin_unlock_irqrestore(&card->buffer_lock, flags);
break;
default:
+ kfree(packet);
netdev_err(priv->dev, "can't transfer buffer of type %d\n",
type);
err = -EINVAL;
wildcard_ssid_tlv->header.len = cpu_to_le16(
(u16) (ssid_len + sizeof(wildcard_ssid_tlv->
max_ssid_length)));
- wildcard_ssid_tlv->max_ssid_length =
- user_scan_in->ssid_list[ssid_idx].max_len;
+
+ /* max_ssid_length = 0 tells firmware to perform
+ specific scan for the SSID filled */
+ wildcard_ssid_tlv->max_ssid_length = 0;
memcpy(wildcard_ssid_tlv->ssid,
user_scan_in->ssid_list[ssid_idx].ssid,
s32 rssi, const u8 *ie_buf, size_t ie_len,
u16 beacon_period, u16 cap_info_bitmap, u8 band)
{
- struct mwifiex_bssdescriptor *bss_desc = NULL;
+ struct mwifiex_bssdescriptor *bss_desc;
int ret;
unsigned long flags;
u8 *beacon_ie;
beacon_ie = kmemdup(ie_buf, ie_len, GFP_KERNEL);
if (!beacon_ie) {
+ kfree(bss_desc);
dev_err(priv->adapter->dev, " failed to alloc beacon_ie\n");
return -ENOMEM;
}
{ USB_DEVICE(0x050d, 0x935b) },
/* Buffalo */
{ USB_DEVICE(0x0411, 0x00e8) },
+ { USB_DEVICE(0x0411, 0x0158) },
{ USB_DEVICE(0x0411, 0x016f) },
{ USB_DEVICE(0x0411, 0x01a2) },
/* Corega */
* Powersaving work
*/
struct delayed_work autowakeup_work;
+ struct work_struct sleep_work;
/*
* Data queue arrays for RX, TX, Beacon and ATIM.
return NULL;
}
+static void rt2x00lib_sleep(struct work_struct *work)
+{
+ struct rt2x00_dev *rt2x00dev =
+ container_of(work, struct rt2x00_dev, sleep_work);
+
+ if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
+ return;
+
+ /*
+ * Check again is powersaving is enabled, to prevent races from delayed
+ * work execution.
+ */
+ if (!test_bit(CONFIG_POWERSAVING, &rt2x00dev->flags))
+ rt2x00lib_config(rt2x00dev, &rt2x00dev->hw->conf,
+ IEEE80211_CONF_CHANGE_PS);
+}
+
static void rt2x00lib_rxdone_check_ps(struct rt2x00_dev *rt2x00dev,
struct sk_buff *skb,
struct rxdone_entry_desc *rxdesc)
cam |= (tim_ie->bitmap_ctrl & 0x01);
if (!cam && !test_bit(CONFIG_POWERSAVING, &rt2x00dev->flags))
- rt2x00lib_config(rt2x00dev, &rt2x00dev->hw->conf,
- IEEE80211_CONF_CHANGE_PS);
+ queue_work(rt2x00dev->workqueue, &rt2x00dev->sleep_work);
}
static int rt2x00lib_rxdone_read_signal(struct rt2x00_dev *rt2x00dev,
INIT_WORK(&rt2x00dev->intf_work, rt2x00lib_intf_scheduled);
INIT_DELAYED_WORK(&rt2x00dev->autowakeup_work, rt2x00lib_autowakeup);
+ INIT_WORK(&rt2x00dev->sleep_work, rt2x00lib_sleep);
/*
* Let the driver probe the device to detect the capabilities.
*/
cancel_work_sync(&rt2x00dev->intf_work);
cancel_delayed_work_sync(&rt2x00dev->autowakeup_work);
+ cancel_work_sync(&rt2x00dev->sleep_work);
if (rt2x00_is_usb(rt2x00dev)) {
del_timer_sync(&rt2x00dev->txstatus_timer);
cancel_work_sync(&rt2x00dev->rxdone_work);
break;
}
/* Fail if SSID isn't present in the filters */
- if (j == req->n_ssids) {
+ if (j == cmd->n_ssids) {
ret = -EINVAL;
goto out_free;
}
# PINCTRL infrastructure and drivers
#
-menuconfig PINCTRL
- bool "PINCTRL Support"
+config PINCTRL
+ bool
depends on EXPERIMENTAL
- help
- This enables the PINCTRL subsystem for controlling pins
- on chip packages, for example multiplexing pins on primarily
- PGA and BGA packages for systems on chip.
-
- If unsure, say N.
if PINCTRL
+menu "Pin controllers"
+ depends on PINCTRL
+
config PINMUX
bool "Support pinmux controllers"
- help
- Say Y here if you want the pincontrol subsystem to handle pin
- multiplexing drivers.
config DEBUG_PINCTRL
bool "Debug PINCTRL calls"
bool "CSR SiRFprimaII pinmux driver"
depends on ARCH_PRIMA2
select PINMUX
- help
- Say Y here to enable the SiRFprimaII pinmux driver
config PINMUX_U300
bool "U300 pinmux driver"
depends on ARCH_U300
select PINMUX
- help
- Say Y here to enable the U300 pinmux driver
+
+endmenu
endif
depends on EXPERIMENTAL
depends on BACKLIGHT_CLASS_DEVICE
depends on RFKILL || RFKILL = n
- depends on POWER_SUPPLY
depends on SERIO_I8042
+ select POWER_SUPPLY
+ select LEDS_CLASS
+ select NEW_LEDS
default n
---help---
This driver adds support for rfkill and backlight control to Dell
.update_status = dell_send_intensity,
};
-static void touchpad_led_on()
+static void touchpad_led_on(void)
{
int command = 0x97;
char data = 1;
i8042_command(&data, command | 1 << 12);
}
-static void touchpad_led_off()
+static void touchpad_led_off(void)
{
int command = 0x97;
char data = 2;
}
result = request_irq(vuart_bus_priv.virq, ps3_vuart_irq_handler,
- IRQF_DISABLED, "vuart", &vuart_bus_priv);
+ 0, "vuart", &vuart_bus_priv);
if (result) {
pr_debug("%s:%d: request_irq failed (%d)\n",
goto fail_close_device;
}
- error = request_irq(dev->irq, handler, IRQF_DISABLED,
+ error = request_irq(dev->irq, handler, 0,
dev->sbd.core.driver->name, dev);
if (error) {
dev_err(&dev->sbd.core, "%s:%u: request_irq failed %d\n",
/*
* rtc_time's year contains the increment over 1900, but vRTC's YEAR
* register can't be programmed to value larger than 0x64, so vRTC
- * driver chose to use 1960 (1970 is UNIX time start point) as the base,
+ * driver chose to use 1972 (1970 is UNIX time start point) as the base,
* and does the translation at read/write time.
*
- * Why not just use 1970 as the offset? it's because using 1960 will
+ * Why not just use 1970 as the offset? it's because using 1972 will
* make it consistent in leap year setting for both vrtc and low-level
- * physical rtc devices.
+ * physical rtc devices. Then why not use 1960 as the offset? If we use
+ * 1960, for a device's first use, its YEAR register is 0 and the system
+ * year will be parsed as 1960 which is not a valid UNIX time and will
+ * cause many applications to fail mysteriously.
*/
static int mrst_read_time(struct device *dev, struct rtc_time *time)
{
time->tm_year = vrtc_cmos_read(RTC_YEAR);
spin_unlock_irqrestore(&rtc_lock, flags);
- /* Adjust for the 1960/1900 */
- time->tm_year += 60;
+ /* Adjust for the 1972/1900 */
+ time->tm_year += 72;
time->tm_mon--;
- return RTC_24H;
+ return rtc_valid_tm(time);
}
static int mrst_set_time(struct device *dev, struct rtc_time *time)
min = time->tm_min;
sec = time->tm_sec;
- if (yrs < 70 || yrs > 138)
+ if (yrs < 72 || yrs > 138)
return -EINVAL;
- yrs -= 60;
+ yrs -= 72;
spin_lock_irqsave(&rtc_lock, flags);
}
}
-static int puv3_rtc_remove(struct platform_device *dev)
+static int __devexit puv3_rtc_remove(struct platform_device *dev)
{
struct rtc_device *rtc = platform_get_drvdata(dev);
return 0;
}
-static int puv3_rtc_probe(struct platform_device *pdev)
+static int __devinit puv3_rtc_probe(struct platform_device *pdev)
{
struct rtc_device *rtc;
struct resource *res;
if (ipl_info.type != IPL_TYPE_FCP_DUMP)
return -ENODATA;
+ if (OLDMEM_BASE)
+ return -ENODATA;
zcore_dbf = debug_register("zcore", 4, 1, 4 * sizeof(long));
debug_register_view(zcore_dbf, &debug_sprintf_view);
}
/**
- * ap_schedule_poll_timer(): Schedule poll timer.
+ * __ap_schedule_poll_timer(): Schedule poll timer.
*
* Set up the timer to run the poll tasklet
*/
-static inline void ap_schedule_poll_timer(void)
+static inline void __ap_schedule_poll_timer(void)
{
ktime_t hr_time;
spin_lock_bh(&ap_poll_timer_lock);
- if (ap_using_interrupts() || ap_suspend_flag)
- goto out;
- if (hrtimer_is_queued(&ap_poll_timer))
+ if (hrtimer_is_queued(&ap_poll_timer) || ap_suspend_flag)
goto out;
if (ktime_to_ns(hrtimer_expires_remaining(&ap_poll_timer)) <= 0) {
hr_time = ktime_set(0, poll_timeout);
spin_unlock_bh(&ap_poll_timer_lock);
}
+/**
+ * ap_schedule_poll_timer(): Schedule poll timer.
+ *
+ * Set up the timer to run the poll tasklet
+ */
+static inline void ap_schedule_poll_timer(void)
+{
+ if (ap_using_interrupts())
+ return;
+ __ap_schedule_poll_timer();
+}
+
/**
* ap_poll_read(): Receive pending reply messages from an AP device.
* @ap_dev: pointer to the AP device
*flags |= 1;
*flags |= 2;
break;
- case AP_RESPONSE_Q_FULL:
case AP_RESPONSE_RESET_IN_PROGRESS:
+ __ap_schedule_poll_timer();
+ case AP_RESPONSE_Q_FULL:
*flags |= 2;
break;
case AP_RESPONSE_MESSAGE_TOO_BIG:
config LCS
def_tristate m
prompt "Lan Channel Station Interface"
- depends on CCW && NETDEVICES && (NET_ETHERNET || TR || FDDI)
+ depends on CCW && NETDEVICES && (ETHERNET || TR || FDDI)
help
Select this option if you want to use LCS networking on IBM System z.
This device driver supports Token Ring (IEEE 802.5),
#include "lcs.h"
-#if !defined(CONFIG_NET_ETHERNET) && \
+#if !defined(CONFIG_ETHERNET) && \
!defined(CONFIG_TR) && !defined(CONFIG_FDDI)
#error Cannot compile lcs.c without some net devices switched on.
#endif
int rc;
LCS_DBF_TEXT(2, trace, "strtauto");
-#ifdef CONFIG_NET_ETHERNET
+#ifdef CONFIG_ETHERNET
card->lan_type = LCS_FRAME_TYPE_ENET;
rc = lcs_send_startlan(card, LCS_INITIATOR_TCPIP);
if (rc == 0)
goto netdev_out;
}
switch (card->lan_type) {
-#ifdef CONFIG_NET_ETHERNET
+#ifdef CONFIG_ETHERNET
case LCS_FRAME_TYPE_ENET:
card->lan_type_trans = eth_type_trans;
dev = alloc_etherdev(0);
netiucv_setup_netdevice);
if (!dev)
return NULL;
+ if (dev_alloc_name(dev, dev->name) < 0)
+ goto out_netdev;
privptr = netdev_priv(dev);
privptr->fsm = init_fsm("netiucvdev", dev_state_names,
#define QETH_IN_BUF_COUNT_MAX 128
#define QETH_MAX_BUFFER_ELEMENTS(card) ((card)->qdio.in_buf_size >> 12)
#define QETH_IN_BUF_REQUEUE_THRESHOLD(card) \
- ((card)->ssqd.qdioac1 & AC1_SIGA_INPUT_NEEDED ? 1 : \
- ((card)->qdio.in_buf_pool.buf_count / 2))
+ ((card)->qdio.in_buf_pool.buf_count / 2)
/* buffers we have to be behind before we get a PCI */
#define QETH_PCI_THRESHOLD_A(card) ((card)->qdio.in_buf_pool.buf_count+1)
void qeth_schedule_recovery(struct qeth_card *card)
{
QETH_CARD_TEXT(card, 2, "startrec");
- WARN_ON(1);
if (qeth_set_thread_start_bit(card, QETH_RECOVER_THREAD) == 0)
schedule_work(&card->kernel_thread_starter);
}
struct neighbour *n = NULL;
struct dst_entry *dst;
+ rcu_read_lock();
dst = skb_dst(skb);
if (dst)
n = dst_get_neighbour(dst);
if (n) {
cast_type = n->type;
+ rcu_read_unlock();
if ((cast_type == RTN_BROADCAST) ||
(cast_type == RTN_MULTICAST) ||
(cast_type == RTN_ANYCAST))
else
return RTN_UNSPEC;
}
+ rcu_read_unlock();
+
/* try something else */
if (skb->protocol == ETH_P_IPV6)
return (skb_network_header(skb)[24] == 0xff) ?
}
hdr->hdr.l3.length = skb->len - sizeof(struct qeth_hdr);
+
+ rcu_read_lock();
dst = skb_dst(skb);
if (dst)
n = dst_get_neighbour(dst);
QETH_CAST_UNICAST | QETH_HDR_PASSTHRU;
}
}
+ rcu_read_unlock();
}
static inline void qeth_l3_hdr_csum(struct qeth_card *card,
QETH_IN_BUF_COUNT_MAX)
qeth_realloc_buffer_pool(card,
QETH_IN_BUF_COUNT_MAX);
- break;
} else
rc = -EPERM;
- default: /* fall through */
+ break;
+ default:
rc = -EINVAL;
}
out:
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/pci.h>
+#include <linux/pci-aspm.h>
#include <linux/slab.h>
#include <linux/mutex.h>
#include <linux/spinlock.h>
unique_id++;
}
+ pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 |
+ PCIE_LINK_STATE_CLKPM);
+
error = pci_enable_device(pdev);
if (error)
goto out;
#include <linux/interrupt.h>
#include <linux/types.h>
#include <linux/pci.h>
+#include <linux/pci-aspm.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/delay.h>
dev_warn(&h->pdev->dev, "controller appears to be disabled\n");
return -ENODEV;
}
+
+ pci_disable_link_state(h->pdev, PCIE_LINK_STATE_L0S |
+ PCIE_LINK_STATE_L1 | PCIE_LINK_STATE_CLKPM);
+
err = pci_enable_device(h->pdev);
if (err) {
dev_warn(&h->pdev->dev, "unable to enable PCI device\n");
if (ioc->is_driver_loading)
return;
+
+ fw_event = kzalloc(sizeof(struct fw_event_work), GFP_ATOMIC);
+ if (!fw_event)
+ return;
+
fw_event->event = MPT2SAS_REMOVE_UNRESPONDING_DEVICES;
fw_event->ioc = ioc;
_scsih_fw_event_add(ioc, fw_event);
blk_start_request(req);
+ scmd_printk(KERN_INFO, cmd, "killing request\n");
+
sdev = cmd->device;
starget = scsi_target(sdev);
shost = sdev->host;
struct request *req;
if (!sdev) {
- printk("scsi: killing requests for dead queue\n");
while ((req = blk_peek_request(q)) != NULL)
scsi_kill_request(req, q);
return;
return sdev;
out_device_destroy:
- scsi_device_set_state(sdev, SDEV_DEL);
- transport_destroy_device(&sdev->sdev_gendev);
- put_device(&sdev->sdev_dev);
- scsi_free_queue(sdev->request_queue);
- put_device(&sdev->sdev_gendev);
+ __scsi_remove_device(sdev);
out:
if (display_failure_msg)
printk(ALLOC_FAILURE_MSG, __func__);
obj-$(CONFIG_MAPLE) += maple/
obj-$(CONFIG_SUPERHYWAY) += superhyway/
obj-$(CONFIG_GENERIC_GPIO) += pfc.o
+
+#
+# For the moment we only use this framework for ARM-based SH/R-Mobile
+# platforms and generic SH. SH-based SH-Mobile platforms are still using
+# an older framework that is pending up-porting, at which point this
+# special casing can go away.
+#
+obj-$(CONFIG_SUPERH)$(CONFIG_ARCH_SHMOBILE) += pm_runtime.o
#include <linux/seq_file.h>
#include <linux/err.h>
#include <linux/io.h>
-#include <linux/debugfs.h>
#include <linux/cpufreq.h>
#include <linux/clk.h>
#include <linux/sh_clk.h>
return clk_rate_round_helper(&div_range_round);
}
+static long clk_rate_mult_range_iter(unsigned int pos,
+ struct clk_rate_round_data *rounder)
+{
+ return clk_get_rate(rounder->arg) * pos;
+}
+
+long clk_rate_mult_range_round(struct clk *clk, unsigned int mult_min,
+ unsigned int mult_max, unsigned long rate)
+{
+ struct clk_rate_round_data mult_range_round = {
+ .min = mult_min,
+ .max = mult_max,
+ .func = clk_rate_mult_range_iter,
+ .arg = clk_get_parent(clk),
+ .rate = rate,
+ };
+
+ return clk_rate_round_helper(&mult_range_round);
+}
+
int clk_rate_table_find(struct clk *clk,
struct cpufreq_frequency_table *freq_table,
unsigned long rate)
list_add(&child->sibling, &parent->children);
child->parent = parent;
- /* now do the debugfs renaming to reattach the child
- to the proper parent */
-
return 0;
}
subsys_initcall(clk_syscore_init);
#endif
-/*
- * debugfs support to trace clock tree hierarchy and attributes
- */
-static struct dentry *clk_debugfs_root;
-
-static int clk_debugfs_register_one(struct clk *c)
-{
- int err;
- struct dentry *d;
- struct clk *pa = c->parent;
- char s[255];
- char *p = s;
-
- p += sprintf(p, "%p", c);
- d = debugfs_create_dir(s, pa ? pa->dentry : clk_debugfs_root);
- if (!d)
- return -ENOMEM;
- c->dentry = d;
-
- d = debugfs_create_u8("usecount", S_IRUGO, c->dentry, (u8 *)&c->usecount);
- if (!d) {
- err = -ENOMEM;
- goto err_out;
- }
- d = debugfs_create_u32("rate", S_IRUGO, c->dentry, (u32 *)&c->rate);
- if (!d) {
- err = -ENOMEM;
- goto err_out;
- }
- d = debugfs_create_x32("flags", S_IRUGO, c->dentry, (u32 *)&c->flags);
- if (!d) {
- err = -ENOMEM;
- goto err_out;
- }
- return 0;
-
-err_out:
- debugfs_remove_recursive(c->dentry);
- return err;
-}
-
-static int clk_debugfs_register(struct clk *c)
-{
- int err;
- struct clk *pa = c->parent;
-
- if (pa && !pa->dentry) {
- err = clk_debugfs_register(pa);
- if (err)
- return err;
- }
-
- if (!c->dentry) {
- err = clk_debugfs_register_one(c);
- if (err)
- return err;
- }
- return 0;
-}
-
-static int __init clk_debugfs_init(void)
-{
- struct clk *c;
- struct dentry *d;
- int err;
-
- d = debugfs_create_dir("clock", NULL);
- if (!d)
- return -ENOMEM;
- clk_debugfs_root = d;
-
- list_for_each_entry(c, &clock_list, node) {
- err = clk_debugfs_register(c);
- if (err)
- goto err_out;
- }
- return 0;
-err_out:
- debugfs_remove_recursive(clk_debugfs_root);
- return err;
-}
-late_initcall(clk_debugfs_init);
-
static int __init clk_late_init(void)
{
unsigned long flags;
/*
- * arch/arm/mach-shmobile/pm_runtime.c
- *
- * Runtime PM support code for SuperH Mobile ARM
+ * Runtime PM support code
*
* Copyright (C) 2009-2010 Magnus Damm
*
/*-------------------------------------------------------------------------*/
-static int __init atmel_spi_probe(struct platform_device *pdev)
+static int __devinit atmel_spi_probe(struct platform_device *pdev)
{
struct resource *regs;
int irq;
return ret;
}
-static int __exit atmel_spi_remove(struct platform_device *pdev)
+static int __devexit atmel_spi_remove(struct platform_device *pdev)
{
struct spi_master *master = platform_get_drvdata(pdev);
struct atmel_spi *as = spi_master_get_devdata(master);
},
.suspend = atmel_spi_suspend,
.resume = atmel_spi_resume,
+ .probe = atmel_spi_probe,
.remove = __exit_p(atmel_spi_remove),
};
module_platform_driver(atmel_spi_driver);
goto err_clk_prep;
}
+ status = clk_enable(pl022->clk);
+ if (status) {
+ dev_err(&adev->dev, "could not enable SSP/SPI bus clock\n");
+ goto err_no_clk_en;
+ }
+
/* Disable SSP */
writew((readw(SSP_CR1(pl022->virtbase)) & (~SSP_CR1_MASK_SSE)),
SSP_CR1(pl022->virtbase));
free_irq(adev->irq[0], pl022);
err_no_irq:
+ clk_disable(pl022->clk);
+ err_no_clk_en:
clk_unprepare(pl022->clk);
err_clk_prep:
clk_put(pl022->clk);
#include "as102_fw.h"
#include "dvbdev.h"
-int debug;
-module_param_named(debug, debug, int, 0644);
+int as102_debug;
+module_param_named(debug, as102_debug, int, 0644);
MODULE_PARM_DESC(debug, "Turn on/off debugging (default: off)");
int dual_tuner;
#define DRIVER_FULL_NAME "Abilis Systems as10x usb driver"
#define DRIVER_NAME "as10x_usb"
-extern int debug;
+extern int as102_debug;
+#define debug as102_debug
#define dprintk(debug, args...) \
do { if (debug) { \
CVM_OCT_SKB_CB(skb)[0] = hw_buffer.u64;
for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
struct skb_frag_struct *fs = skb_shinfo(skb)->frags + i;
- hw_buffer.s.addr = XKPHYS_TO_PHYS((u64)(page_address(fs->page) + fs->page_offset));
+ hw_buffer.s.addr = XKPHYS_TO_PHYS((u64)(page_address(fs->page.p) + fs->page_offset));
hw_buffer.s.size = fs->size;
CVM_OCT_SKB_CB(skb)[i + 1] = hw_buffer.u64;
}
asm volatile("mrc p14, 0, %0, c0, c5, 0 @ read comms data reg"
: "=r" (__c));
+ isb();
return __c;
}
asm volatile("mcr p14, 0, %0, c0, c5, 0 @ write a char"
: /* no output register */
: "r" (c));
+ isb();
}
static int hvc_dcc_put_chars(uint32_t vt, const char *buf, int count)
static int debug;
module_param(debug, int, 0600);
-#define T1 (HZ/10)
-#define T2 (HZ/3)
-#define N2 3
+/* Defaults: these are from the specification */
+
+#define T1 10 /* 100mS */
+#define T2 34 /* 333mS */
+#define N2 3 /* Retry 3 times */
/* Use long timers for testing at low speed with debug on */
#ifdef DEBUG_TIMING
-#define T1 HZ
-#define T2 (2 * HZ)
+#define T1 100
+#define T2 200
#endif
/*
Support for the IFX6x60 modem devices on Intel MID platforms.
config SERIAL_PCH_UART
- tristate "Intel EG20T PCH / OKI SEMICONDUCTOR IOH(ML7213/ML7223) UART"
+ tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) UART"
depends on PCI
select SERIAL_CORE
help
which is an IOH(Input/Output Hub) for x86 embedded processor.
Enabling PCH_DMA, this PCH UART works as DMA mode.
- This driver also can be used for OKI SEMICONDUCTOR IOH(Input/
- Output Hub), ML7213 and ML7223.
- ML7213 IOH is for IVI(In-Vehicle Infotainment) use and ML7223 IOH is
- for MP(Media Phone) use.
- ML7213/ML7223 is companion chip for Intel Atom E6xx series.
- ML7213/ML7223 is completely compatible for Intel EG20T PCH.
+ This driver also can be used for LAPIS Semiconductor IOH(Input/
+ Output Hub), ML7213, ML7223 and ML7831.
+ ML7213 IOH is for IVI(In-Vehicle Infotainment) use, ML7223 IOH is
+ for MP(Media Phone) use and ML7831 IOH is for general purpose use.
+ ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series.
+ ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH.
config SERIAL_MSM_SMD
bool "Enable tty device interface for some SMD ports"
if (rs485conf->flags & SER_RS485_ENABLED) {
dev_dbg(port->dev, "Setting UART to RS485\n");
atmel_port->tx_done_mask = ATMEL_US_TXEMPTY;
- if (rs485conf->flags & SER_RS485_RTS_AFTER_SEND)
+ if ((rs485conf->delay_rts_after_send) > 0)
UART_PUT_TTGR(port, rs485conf->delay_rts_after_send);
mode |= ATMEL_US_USMODE_RS485;
} else {
if (atmel_port->rs485.flags & SER_RS485_ENABLED) {
dev_dbg(port->dev, "Setting UART to RS485\n");
- if (atmel_port->rs485.flags & SER_RS485_RTS_AFTER_SEND)
+ if ((atmel_port->rs485.delay_rts_after_send) > 0)
UART_PUT_TTGR(port,
atmel_port->rs485.delay_rts_after_send);
mode |= ATMEL_US_USMODE_RS485;
if (atmel_port->rs485.flags & SER_RS485_ENABLED) {
dev_dbg(port->dev, "Setting UART to RS485\n");
- if (atmel_port->rs485.flags & SER_RS485_RTS_AFTER_SEND)
+ if ((atmel_port->rs485.delay_rts_after_send) > 0)
UART_PUT_TTGR(port,
atmel_port->rs485.delay_rts_after_send);
mode |= ATMEL_US_USMODE_RS485;
rs485conf->delay_rts_after_send = rs485_delay[1];
rs485conf->flags = 0;
- if (rs485conf->delay_rts_before_send == 0 &&
- rs485conf->delay_rts_after_send == 0) {
- rs485conf->flags |= SER_RS485_RTS_ON_SEND;
- } else {
- if (rs485conf->delay_rts_before_send)
- rs485conf->flags |= SER_RS485_RTS_BEFORE_SEND;
- if (rs485conf->delay_rts_after_send)
- rs485conf->flags |= SER_RS485_RTS_AFTER_SEND;
- }
-
if (of_get_property(np, "rs485-rx-during-tx", NULL))
rs485conf->flags |= SER_RS485_RX_DURING_TX;
e100_disable_rx(info);
e100_enable_rx_irq(info);
#endif
- if ((info->rs485.flags & SER_RS485_RTS_BEFORE_SEND) &&
- (info->rs485.delay_rts_before_send > 0))
- msleep(info->rs485.delay_rts_before_send);
+ if (info->rs485.delay_rts_before_send > 0)
+ msleep(info->rs485.delay_rts_before_send);
}
#endif /* CONFIG_ETRAX_RS485 */
rs485data.delay_rts_before_send = rs485ctrl.delay_rts_before_send;
rs485data.flags = 0;
- if (rs485data.delay_rts_before_send != 0)
- rs485data.flags |= SER_RS485_RTS_BEFORE_SEND;
- else
- rs485data.flags &= ~(SER_RS485_RTS_BEFORE_SEND);
if (rs485ctrl.enabled)
rs485data.flags |= SER_RS485_ENABLED;
/* Set sane defaults */
info->rs485.flags &= ~(SER_RS485_RTS_ON_SEND);
info->rs485.flags |= SER_RS485_RTS_AFTER_SEND;
- info->rs485.flags &= ~(SER_RS485_RTS_BEFORE_SEND);
info->rs485.delay_rts_before_send = 0;
info->rs485.flags &= ~(SER_RS485_ENABLED);
#endif
{
struct uart_hsu_port *up =
container_of(port, struct uart_hsu_port, port);
- struct tty_struct *tty = port->state->port.tty;
unsigned char cval, fcr = 0;
unsigned long flags;
unsigned int baud, quot;
}
/* CMSPAR isn't supported by this driver */
- if (tty)
- tty->termios->c_cflag &= ~CMSPAR;
+ termios->c_cflag &= ~CMSPAR;
if (termios->c_cflag & CSTOPB)
cval |= UART_LCR_STOP;
/*
- *Copyright (C) 2010 OKI SEMICONDUCTOR CO., LTD.
+ *Copyright (C) 2011 LAPIS Semiconductor Co., Ltd.
*
*This program is free software; you can redistribute it and/or modify
*it under the terms of the GNU General Public License as published by
/* Set the max number of UART port
* Intel EG20T PCH: 4 port
- * OKI SEMICONDUCTOR ML7213 IOH: 3 port
- * OKI SEMICONDUCTOR ML7223 IOH: 2 port
+ * LAPIS Semiconductor ML7213 IOH: 3 port
+ * LAPIS Semiconductor ML7223 IOH: 2 port
*/
#define PCH_UART_NR 4
pch_ml7213_uart2,
pch_ml7223_uart0,
pch_ml7223_uart1,
+ pch_ml7831_uart0,
+ pch_ml7831_uart1,
};
static struct pch_uart_driver_data drv_dat[] = {
[pch_ml7213_uart2] = {PCH_UART_2LINE, 2},
[pch_ml7223_uart0] = {PCH_UART_8LINE, 0},
[pch_ml7223_uart1] = {PCH_UART_2LINE, 1},
+ [pch_ml7831_uart0] = {PCH_UART_8LINE, 0},
+ [pch_ml7831_uart1] = {PCH_UART_2LINE, 1},
};
static unsigned int default_baud = 9600;
dev_err(priv->port.dev, "%s:dma_request_channel FAILS(Rx)\n",
__func__);
dma_release_channel(priv->chan_tx);
+ priv->chan_tx = NULL;
return;
}
dev_err(priv->port.dev,
"pch_uart_hal_set_fifo Failed(ret=%d)\n", ret);
- if (priv->use_dma_flag)
- pch_free_dma(port);
+ pch_free_dma(port);
free_irq(priv->port.irq, priv);
}
if (rtn)
goto out;
+ pch_uart_set_mctrl(&priv->port, priv->port.mctrl);
/* Don't rewrite B0 */
if (tty_termios_baud_rate(termios))
tty_termios_encode_baud_rate(termios, baud, baud);
.driver_data = pch_ml7223_uart0},
{PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x800D),
.driver_data = pch_ml7223_uart1},
+ {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8811),
+ .driver_data = pch_ml7831_uart0},
+ {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8812),
+ .driver_data = pch_ml7831_uart1},
{0,},
};
[SCLSR] = sci_reg_invalid,
},
+ /*
+ * Common SH-2(A) SCIF definitions for ports with FIFO data
+ * count registers.
+ */
+ [SCIx_SH2_SCIF_FIFODATA_REGTYPE] = {
+ [SCSMR] = { 0x00, 16 },
+ [SCBRR] = { 0x04, 8 },
+ [SCSCR] = { 0x08, 16 },
+ [SCxTDR] = { 0x0c, 8 },
+ [SCxSR] = { 0x10, 16 },
+ [SCxRDR] = { 0x14, 8 },
+ [SCFCR] = { 0x18, 16 },
+ [SCFDR] = { 0x1c, 16 },
+ [SCTFDR] = sci_reg_invalid,
+ [SCRFDR] = sci_reg_invalid,
+ [SCSPTR] = { 0x20, 16 },
+ [SCLSR] = { 0x24, 16 },
+ },
+
/*
* Common SH-3 SCIF definitions.
*/
#include <linux/kmod.h>
#include <linux/nsproxy.h>
+#include <linux/ratelimit.h>
/*
* This guards the refcounted line discipline lists. The lock
/**
* tty_ldisc_wait_idle - wait for the ldisc to become idle
* @tty: tty to wait for
+ * @timeout: for how long to wait at most
*
* Wait for the line discipline to become idle. The discipline must
* have been halted for this to guarantee it remains idle.
*/
-static int tty_ldisc_wait_idle(struct tty_struct *tty)
+static int tty_ldisc_wait_idle(struct tty_struct *tty, long timeout)
{
- int ret;
+ long ret;
ret = wait_event_timeout(tty_ldisc_idle,
- atomic_read(&tty->ldisc->users) == 1, 5 * HZ);
+ atomic_read(&tty->ldisc->users) == 1, timeout);
if (ret < 0)
return ret;
return ret > 0 ? 0 : -EBUSY;
tty_ldisc_flush_works(tty);
- retval = tty_ldisc_wait_idle(tty);
+ retval = tty_ldisc_wait_idle(tty, 5 * HZ);
tty_lock();
mutex_lock(&tty->ldisc_mutex);
if (IS_ERR(ld))
return -1;
- WARN_ON_ONCE(tty_ldisc_wait_idle(tty));
-
tty_ldisc_close(tty, tty->ldisc);
tty_ldisc_put(tty->ldisc);
tty->ldisc = NULL;
tty_unlock();
cancel_work_sync(&tty->buf.work);
mutex_unlock(&tty->ldisc_mutex);
-
+retry:
tty_lock();
mutex_lock(&tty->ldisc_mutex);
it means auditing a lot of other paths so this is
a FIXME */
if (tty->ldisc) { /* Not yet closed */
+ if (atomic_read(&tty->ldisc->users) != 1) {
+ char cur_n[TASK_COMM_LEN], tty_n[64];
+ long timeout = 3 * HZ;
+ tty_unlock();
+
+ while (tty_ldisc_wait_idle(tty, timeout) == -EBUSY) {
+ timeout = MAX_SCHEDULE_TIMEOUT;
+ printk_ratelimited(KERN_WARNING
+ "%s: waiting (%s) for %s took too long, but we keep waiting...\n",
+ __func__, get_task_comm(cur_n, current),
+ tty_name(tty, tty_n));
+ }
+ mutex_unlock(&tty->ldisc_mutex);
+ goto retry;
+ }
+
if (reset == 0) {
if (!tty_ldisc_reinit(tty, tty->termios->c_line))
}
skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, page,
- skb->len == 0, req->actual);
+ skb->len <= 1, req->actual);
page = NULL;
if (req->actual < req->length) { /* Last fragment */
static void virtio_pci_release_dev(struct device *_d)
{
- struct virtio_device *dev = container_of(_d, struct virtio_device,
- dev);
- struct virtio_pci_device *vp_dev = to_vp_device(dev);
-
- kfree(vp_dev);
+ /*
+ * No need for a release method as we allocate/free
+ * all devices together with the pci devices.
+ * Provide an empty one to avoid getting a warning from core.
+ */
}
/* the PCI probing function */
pci_iounmap(pci_dev, vp_dev->ioaddr);
pci_release_regions(pci_dev);
pci_disable_device(pci_dev);
+ kfree(vp_dev);
}
#ifdef CONFIG_PM
* alloc_xenballooned_pages - get pages that have been ballooned out
* @nr_pages: Number of pages to get
* @pages: pages returned
- * @highmem: highmem or lowmem pages
+ * @highmem: allow highmem pages
* @return 0 on success, error otherwise
*/
int alloc_xenballooned_pages(int nr_pages, struct page **pages, bool highmem)
mutex_lock(&balloon_mutex);
while (pgno < nr_pages) {
page = balloon_retrieve(highmem);
- if (page && PageHighMem(page) == highmem) {
+ if (page && (highmem || !PageHighMem(page))) {
pages[pgno++] = page;
} else {
enum bp_state st;
/* Grant foreign access to the page. */
gref->gref_id = gnttab_grant_foreign_access(op->domid,
pfn_to_mfn(page_to_pfn(gref->page)), readonly);
- if (gref->gref_id < 0) {
+ if ((int)gref->gref_id < 0) {
rc = gref->gref_id;
goto undo;
}
goto out;
}
- gref_ids = kzalloc(sizeof(gref_ids[0]) * op.count, GFP_TEMPORARY);
+ gref_ids = kcalloc(op.count, sizeof(gref_ids[0]), GFP_TEMPORARY);
if (!gref_ids) {
rc = -ENOMEM;
goto out;
if (NULL == add)
return NULL;
- add->grants = kzalloc(sizeof(add->grants[0]) * count, GFP_KERNEL);
- add->map_ops = kzalloc(sizeof(add->map_ops[0]) * count, GFP_KERNEL);
- add->unmap_ops = kzalloc(sizeof(add->unmap_ops[0]) * count, GFP_KERNEL);
- add->kmap_ops = kzalloc(sizeof(add->kmap_ops[0]) * count, GFP_KERNEL);
- add->pages = kzalloc(sizeof(add->pages[0]) * count, GFP_KERNEL);
+ add->grants = kcalloc(count, sizeof(add->grants[0]), GFP_KERNEL);
+ add->map_ops = kcalloc(count, sizeof(add->map_ops[0]), GFP_KERNEL);
+ add->unmap_ops = kcalloc(count, sizeof(add->unmap_ops[0]), GFP_KERNEL);
+ add->kmap_ops = kcalloc(count, sizeof(add->kmap_ops[0]), GFP_KERNEL);
+ add->pages = kcalloc(count, sizeof(add->pages[0]), GFP_KERNEL);
if (NULL == add->grants ||
NULL == add->map_ops ||
NULL == add->unmap_ops ||
#include <linux/vmalloc.h>
#include <linux/export.h>
#include <asm/xen/hypervisor.h>
+#include <asm/xen/page.h>
#include <xen/interface/xen.h>
#include <xen/interface/event_channel.h>
#include <xen/events.h>
int xenbus_map_ring_valloc(struct xenbus_device *dev, int gnt_ref, void **vaddr)
{
struct gnttab_map_grant_ref op = {
- .flags = GNTMAP_host_map,
+ .flags = GNTMAP_host_map | GNTMAP_contains_pte,
.ref = gnt_ref,
.dom = dev->otherend_id,
};
struct vm_struct *area;
+ pte_t *pte;
*vaddr = NULL;
- area = alloc_vm_area(PAGE_SIZE);
+ area = alloc_vm_area(PAGE_SIZE, &pte);
if (!area)
return -ENOMEM;
- op.host_addr = (unsigned long)area->addr;
+ op.host_addr = arbitrary_virt_to_machine(pte).maddr;
if (HYPERVISOR_grant_table_op(GNTTABOP_map_grant_ref, &op, 1))
BUG();
struct gnttab_unmap_grant_ref op = {
.host_addr = (unsigned long)vaddr,
};
+ unsigned int level;
/* It'd be nice if linux/vmalloc.h provided a find_vm_area(void *addr)
* method so that we don't have to muck with vmalloc internals here.
}
op.handle = (grant_handle_t)area->phys_addr;
+ op.host_addr = arbitrary_virt_to_machine(
+ lookup_address((unsigned long)vaddr, &level)).maddr;
if (HYPERVISOR_grant_table_op(GNTTABOP_unmap_grant_ref, &op, 1))
BUG();
* RETURNS:
* Pointer to new bio on success, NULL on failure.
*/
-struct bio *bio_alloc(gfp_t gfp_mask, int nr_iovecs)
+struct bio *bio_alloc(gfp_t gfp_mask, unsigned int nr_iovecs)
{
struct bio *bio = bio_alloc_bioset(gfp_mask, nr_iovecs, fs_bio_set);
* %__GFP_WAIT, the allocation is guaranteed to succeed.
*
**/
-struct bio *bio_kmalloc(gfp_t gfp_mask, int nr_iovecs)
+struct bio *bio_kmalloc(gfp_t gfp_mask, unsigned int nr_iovecs)
{
struct bio *bio;
kfree(bmd);
}
-static struct bio_map_data *bio_alloc_map_data(int nr_segs, int iov_count,
+static struct bio_map_data *bio_alloc_map_data(int nr_segs,
+ unsigned int iov_count,
gfp_t gfp_mask)
{
struct bio_map_data *bmd;
* the btrfs file release call will add this inode to the
* ordered operations list so that we make sure to flush out any
* new data the application may have written before commit.
- *
- * yes, its silly to have a single bitflag, but we might grow more
- * of these.
*/
unsigned ordered_data_close:1;
unsigned orphan_meta_reserved:1;
unsigned dummy_inode:1;
unsigned in_defrag:1;
+ unsigned delalloc_meta_reserved:1;
/*
* always compress this one file
static int btrfs_delayed_inode_reserve_metadata(
struct btrfs_trans_handle *trans,
struct btrfs_root *root,
+ struct inode *inode,
struct btrfs_delayed_node *node)
{
struct btrfs_block_rsv *src_rsv;
struct btrfs_block_rsv *dst_rsv;
u64 num_bytes;
int ret;
+ int release = false;
src_rsv = trans->block_rsv;
dst_rsv = &root->fs_info->delayed_block_rsv;
if (!ret)
node->bytes_reserved = num_bytes;
return ret;
+ } else if (src_rsv == &root->fs_info->delalloc_block_rsv) {
+ spin_lock(&BTRFS_I(inode)->lock);
+ if (BTRFS_I(inode)->delalloc_meta_reserved) {
+ BTRFS_I(inode)->delalloc_meta_reserved = 0;
+ spin_unlock(&BTRFS_I(inode)->lock);
+ release = true;
+ goto migrate;
+ }
+ spin_unlock(&BTRFS_I(inode)->lock);
+
+ /* Ok we didn't have space pre-reserved. This shouldn't happen
+ * too often but it can happen if we do delalloc to an existing
+ * inode which gets dirtied because of the time update, and then
+ * isn't touched again until after the transaction commits and
+ * then we try to write out the data. First try to be nice and
+ * reserve something strictly for us. If not be a pain and try
+ * to steal from the delalloc block rsv.
+ */
+ ret = btrfs_block_rsv_add_noflush(root, dst_rsv, num_bytes);
+ if (!ret)
+ goto out;
+
+ ret = btrfs_block_rsv_migrate(src_rsv, dst_rsv, num_bytes);
+ if (!ret)
+ goto out;
+
+ /*
+ * Ok this is a problem, let's just steal from the global rsv
+ * since this really shouldn't happen that often.
+ */
+ WARN_ON(1);
+ ret = btrfs_block_rsv_migrate(&root->fs_info->global_block_rsv,
+ dst_rsv, num_bytes);
+ goto out;
}
+migrate:
ret = btrfs_block_rsv_migrate(src_rsv, dst_rsv, num_bytes);
+
+out:
+ /*
+ * Migrate only takes a reservation, it doesn't touch the size of the
+ * block_rsv. This is to simplify people who don't normally have things
+ * migrated from their block rsv. If they go to release their
+ * reservation, that will decrease the size as well, so if migrate
+ * reduced size we'd end up with a negative size. But for the
+ * delalloc_meta_reserved stuff we will only know to drop 1 reservation,
+ * but we could in fact do this reserve/migrate dance several times
+ * between the time we did the original reservation and we'd clean it
+ * up. So to take care of this, release the space for the meta
+ * reservation here. I think it may be time for a documentation page on
+ * how block rsvs. work.
+ */
if (!ret)
node->bytes_reserved = num_bytes;
+ if (release)
+ btrfs_block_rsv_release(root, src_rsv, num_bytes);
+
return ret;
}
goto release_node;
}
- ret = btrfs_delayed_inode_reserve_metadata(trans, root, delayed_node);
+ ret = btrfs_delayed_inode_reserve_metadata(trans, root, inode,
+ delayed_node);
if (ret)
goto release_node;
u64 features;
struct btrfs_key location;
struct buffer_head *bh;
- struct btrfs_root *extent_root = kzalloc(sizeof(struct btrfs_root),
- GFP_NOFS);
- struct btrfs_root *csum_root = kzalloc(sizeof(struct btrfs_root),
- GFP_NOFS);
+ struct btrfs_super_block *disk_super;
struct btrfs_root *tree_root = btrfs_sb(sb);
- struct btrfs_fs_info *fs_info = NULL;
- struct btrfs_root *chunk_root = kzalloc(sizeof(struct btrfs_root),
- GFP_NOFS);
- struct btrfs_root *dev_root = kzalloc(sizeof(struct btrfs_root),
- GFP_NOFS);
+ struct btrfs_fs_info *fs_info = tree_root->fs_info;
+ struct btrfs_root *extent_root;
+ struct btrfs_root *csum_root;
+ struct btrfs_root *chunk_root;
+ struct btrfs_root *dev_root;
struct btrfs_root *log_tree_root;
-
int ret;
int err = -EINVAL;
int num_backups_tried = 0;
int backup_index = 0;
- struct btrfs_super_block *disk_super;
+ extent_root = fs_info->extent_root =
+ kzalloc(sizeof(struct btrfs_root), GFP_NOFS);
+ csum_root = fs_info->csum_root =
+ kzalloc(sizeof(struct btrfs_root), GFP_NOFS);
+ chunk_root = fs_info->chunk_root =
+ kzalloc(sizeof(struct btrfs_root), GFP_NOFS);
+ dev_root = fs_info->dev_root =
+ kzalloc(sizeof(struct btrfs_root), GFP_NOFS);
- if (!extent_root || !tree_root || !tree_root->fs_info ||
- !chunk_root || !dev_root || !csum_root) {
+ if (!extent_root || !csum_root || !chunk_root || !dev_root) {
err = -ENOMEM;
goto fail;
}
- fs_info = tree_root->fs_info;
ret = init_srcu_struct(&fs_info->subvol_srcu);
if (ret) {
mutex_init(&fs_info->reloc_mutex);
init_completion(&fs_info->kobj_unregister);
- fs_info->tree_root = tree_root;
- fs_info->extent_root = extent_root;
- fs_info->csum_root = csum_root;
- fs_info->chunk_root = chunk_root;
- fs_info->dev_root = dev_root;
- fs_info->fs_devices = fs_devices;
INIT_LIST_HEAD(&fs_info->dirty_cowonly_roots);
INIT_LIST_HEAD(&fs_info->space_info);
btrfs_mapping_init(&fs_info->mapping_tree);
btrfs_stop_workers(&fs_info->caching_workers);
fail_alloc:
fail_iput:
+ btrfs_mapping_tree_free(&fs_info->mapping_tree);
+
invalidate_inode_pages2(fs_info->btree_inode->i_mapping);
iput(fs_info->btree_inode);
-
- btrfs_close_devices(fs_info->fs_devices);
- btrfs_mapping_tree_free(&fs_info->mapping_tree);
fail_bdi:
bdi_destroy(&fs_info->bdi);
fail_srcu:
cleanup_srcu_struct(&fs_info->subvol_srcu);
fail:
+ btrfs_close_devices(fs_info->fs_devices);
free_fs_info(fs_info);
return ERR_PTR(err);
recovery_tree_root:
-
if (!btrfs_test_opt(tree_root, RECOVERY))
goto fail_tree_roots;
kfree(rsv);
}
-int btrfs_block_rsv_add(struct btrfs_root *root,
- struct btrfs_block_rsv *block_rsv,
- u64 num_bytes)
+static inline int __block_rsv_add(struct btrfs_root *root,
+ struct btrfs_block_rsv *block_rsv,
+ u64 num_bytes, int flush)
{
int ret;
if (num_bytes == 0)
return 0;
- ret = reserve_metadata_bytes(root, block_rsv, num_bytes, 1);
+ ret = reserve_metadata_bytes(root, block_rsv, num_bytes, flush);
if (!ret) {
block_rsv_add_bytes(block_rsv, num_bytes, 1);
return 0;
return ret;
}
+int btrfs_block_rsv_add(struct btrfs_root *root,
+ struct btrfs_block_rsv *block_rsv,
+ u64 num_bytes)
+{
+ return __block_rsv_add(root, block_rsv, num_bytes, 1);
+}
+
int btrfs_block_rsv_add_noflush(struct btrfs_root *root,
struct btrfs_block_rsv *block_rsv,
u64 num_bytes)
{
- int ret;
-
- if (num_bytes == 0)
- return 0;
-
- ret = reserve_metadata_bytes(root, block_rsv, num_bytes, 0);
- if (!ret) {
- block_rsv_add_bytes(block_rsv, num_bytes, 1);
- return 0;
- }
-
- return ret;
+ return __block_rsv_add(root, block_rsv, num_bytes, 0);
}
int btrfs_block_rsv_check(struct btrfs_root *root,
*/
static unsigned drop_outstanding_extent(struct inode *inode)
{
+ unsigned drop_inode_space = 0;
unsigned dropped_extents = 0;
BUG_ON(!BTRFS_I(inode)->outstanding_extents);
BTRFS_I(inode)->outstanding_extents--;
+ if (BTRFS_I(inode)->outstanding_extents == 0 &&
+ BTRFS_I(inode)->delalloc_meta_reserved) {
+ drop_inode_space = 1;
+ BTRFS_I(inode)->delalloc_meta_reserved = 0;
+ }
+
/*
* If we have more or the same amount of outsanding extents than we have
* reserved then we need to leave the reserved extents count alone.
*/
if (BTRFS_I(inode)->outstanding_extents >=
BTRFS_I(inode)->reserved_extents)
- return 0;
+ return drop_inode_space;
dropped_extents = BTRFS_I(inode)->reserved_extents -
BTRFS_I(inode)->outstanding_extents;
BTRFS_I(inode)->reserved_extents -= dropped_extents;
- return dropped_extents;
+ return dropped_extents + drop_inode_space;
}
/**
nr_extents = BTRFS_I(inode)->outstanding_extents -
BTRFS_I(inode)->reserved_extents;
BTRFS_I(inode)->reserved_extents += nr_extents;
+ }
- to_reserve = btrfs_calc_trans_metadata_size(root, nr_extents);
+ /*
+ * Add an item to reserve for updating the inode when we complete the
+ * delalloc io.
+ */
+ if (!BTRFS_I(inode)->delalloc_meta_reserved) {
+ nr_extents++;
+ BTRFS_I(inode)->delalloc_meta_reserved = 1;
}
+
+ to_reserve = btrfs_calc_trans_metadata_size(root, nr_extents);
to_reserve += calc_csum_metadata_size(inode, num_bytes, 1);
spin_unlock(&BTRFS_I(inode)->lock);
struct btrfs_free_space *entry, u8 *type)
{
struct btrfs_free_space_entry *e;
+ int ret;
+
+ if (!io_ctl->cur) {
+ ret = io_ctl_check_crc(io_ctl, io_ctl->index);
+ if (ret)
+ return ret;
+ }
e = io_ctl->cur;
entry->offset = le64_to_cpu(e->offset);
io_ctl_unmap_page(io_ctl);
- if (io_ctl->index >= io_ctl->num_pages)
- return 0;
-
- return io_ctl_check_crc(io_ctl, io_ctl->index);
+ return 0;
}
static int io_ctl_read_bitmap(struct io_ctl *io_ctl,
{
int ret;
- if (io_ctl->cur && io_ctl->cur != io_ctl->orig)
- io_ctl_unmap_page(io_ctl);
-
ret = io_ctl_check_crc(io_ctl, io_ctl->index);
if (ret)
return ret;
num_entries--;
}
+ io_ctl_unmap_page(&io_ctl);
+
/*
* We add the bitmaps at the end of the entries in order that
* the bitmap entries are added to the cache.
struct btrfs_free_space_ctl *ctl = root->free_ino_ctl;
struct btrfs_path *path;
struct inode *inode;
+ struct btrfs_block_rsv *rsv;
+ u64 num_bytes;
u64 alloc_hint = 0;
int ret;
int prealloc;
if (!path)
return -ENOMEM;
+ rsv = trans->block_rsv;
+ trans->block_rsv = &root->fs_info->trans_block_rsv;
+
+ num_bytes = trans->bytes_reserved;
+ /*
+ * 1 item for inode item insertion if need
+ * 3 items for inode item update (in the worst case)
+ * 1 item for free space object
+ * 3 items for pre-allocation
+ */
+ trans->bytes_reserved = btrfs_calc_trans_metadata_size(root, 8);
+ ret = btrfs_block_rsv_add_noflush(root, trans->block_rsv,
+ trans->bytes_reserved);
+ if (ret)
+ goto out;
again:
inode = lookup_free_ino_inode(root, path);
if (IS_ERR(inode) && PTR_ERR(inode) != -ENOENT) {
ret = PTR_ERR(inode);
- goto out;
+ goto out_release;
}
if (IS_ERR(inode)) {
ret = create_free_ino_inode(root, trans, path);
if (ret)
- goto out;
+ goto out_release;
goto again;
}
}
btrfs_free_reserved_data_space(inode, prealloc);
+ ret = btrfs_write_out_ino_cache(root, trans, path);
out_put:
iput(inode);
+out_release:
+ btrfs_block_rsv_release(root, trans->block_rsv, trans->bytes_reserved);
out:
- if (ret == 0)
- ret = btrfs_write_out_ino_cache(root, trans, path);
+ trans->block_rsv = rsv;
+ trans->bytes_reserved = num_bytes;
btrfs_free_path(path);
return ret;
struct page *locked_page,
u64 start, u64 end, int *page_started,
unsigned long *nr_written, int unlock);
+static noinline int btrfs_update_inode_fallback(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root, struct inode *inode);
static int btrfs_init_inode_security(struct btrfs_trans_handle *trans,
struct inode *inode, struct inode *dir,
trans = btrfs_join_transaction(root);
BUG_ON(IS_ERR(trans));
trans->block_rsv = &root->fs_info->delalloc_block_rsv;
- ret = btrfs_update_inode(trans, root, inode);
+ ret = btrfs_update_inode_fallback(trans, root, inode);
BUG_ON(ret);
}
goto out;
ret = btrfs_ordered_update_i_size(inode, 0, ordered_extent);
if (!ret || !test_bit(BTRFS_ORDERED_PREALLOC, &ordered_extent->flags)) {
- ret = btrfs_update_inode(trans, root, inode);
+ ret = btrfs_update_inode_fallback(trans, root, inode);
BUG_ON(ret);
}
ret = 0;
if (ret)
goto out;
}
+ /* release the path since we're done with it */
+ btrfs_release_path(path);
+
root->orphan_cleanup_state = ORPHAN_CLEANUP_DONE;
if (root->orphan_block_rsv)
/*
* copy everything in the in-memory inode into the btree.
*/
-noinline int btrfs_update_inode(struct btrfs_trans_handle *trans,
+static noinline int btrfs_update_inode_item(struct btrfs_trans_handle *trans,
struct btrfs_root *root, struct inode *inode)
{
struct btrfs_inode_item *inode_item;
struct extent_buffer *leaf;
int ret;
- /*
- * If the inode is a free space inode, we can deadlock during commit
- * if we put it into the delayed code.
- *
- * The data relocation inode should also be directly updated
- * without delay
- */
- if (!btrfs_is_free_space_inode(root, inode)
- && root->root_key.objectid != BTRFS_DATA_RELOC_TREE_OBJECTID) {
- ret = btrfs_delayed_update_inode(trans, root, inode);
- if (!ret)
- btrfs_set_inode_last_trans(trans, inode);
- return ret;
- }
-
path = btrfs_alloc_path();
if (!path)
return -ENOMEM;
return ret;
}
+/*
+ * copy everything in the in-memory inode into the btree.
+ */
+noinline int btrfs_update_inode(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root, struct inode *inode)
+{
+ int ret;
+
+ /*
+ * If the inode is a free space inode, we can deadlock during commit
+ * if we put it into the delayed code.
+ *
+ * The data relocation inode should also be directly updated
+ * without delay
+ */
+ if (!btrfs_is_free_space_inode(root, inode)
+ && root->root_key.objectid != BTRFS_DATA_RELOC_TREE_OBJECTID) {
+ ret = btrfs_delayed_update_inode(trans, root, inode);
+ if (!ret)
+ btrfs_set_inode_last_trans(trans, inode);
+ return ret;
+ }
+
+ return btrfs_update_inode_item(trans, root, inode);
+}
+
+static noinline int btrfs_update_inode_fallback(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root, struct inode *inode)
+{
+ int ret;
+
+ ret = btrfs_update_inode(trans, root, inode);
+ if (ret == -ENOSPC)
+ return btrfs_update_inode_item(trans, root, inode);
+ return ret;
+}
+
/*
* unlink helper that gets used here in inode.c and in the tree logging
* recovery code. It remove a link in a directory with a given name, and
if (test_bit(BTRFS_ORDERED_NOCOW, &ordered->flags)) {
ret = btrfs_ordered_update_i_size(inode, 0, ordered);
if (!ret)
- err = btrfs_update_inode(trans, root, inode);
+ err = btrfs_update_inode_fallback(trans, root, inode);
goto out;
}
add_pending_csums(trans, inode, ordered->file_offset, &ordered->list);
ret = btrfs_ordered_update_i_size(inode, 0, ordered);
if (!ret || !test_bit(BTRFS_ORDERED_PREALLOC, &ordered->flags))
- btrfs_update_inode(trans, root, inode);
+ btrfs_update_inode_fallback(trans, root, inode);
ret = 0;
out_unlock:
unlock_extent_cached(&BTRFS_I(inode)->io_tree, ordered->file_offset,
ret = btrfs_orphan_del(NULL, inode);
}
- trans->block_rsv = &root->fs_info->trans_block_rsv;
- ret = btrfs_update_inode(trans, root, inode);
- if (ret && !err)
- err = ret;
+ if (trans) {
+ trans->block_rsv = &root->fs_info->trans_block_rsv;
+ ret = btrfs_update_inode(trans, root, inode);
+ if (ret && !err)
+ err = ret;
- nr = trans->blocks_used;
- ret = btrfs_end_transaction_throttle(trans, root);
- btrfs_btree_balance_dirty(root, nr);
+ nr = trans->blocks_used;
+ ret = btrfs_end_transaction_throttle(trans, root);
+ btrfs_btree_balance_dirty(root, nr);
+ }
out:
btrfs_free_block_rsv(root, rsv);
ei->orphan_meta_reserved = 0;
ei->dummy_inode = 0;
ei->in_defrag = 0;
+ ei->delalloc_meta_reserved = 0;
ei->force_compress = BTRFS_COMPRESS_NONE;
ei->delayed_node = NULL;
list_add_tail(&new_edge->list[UPPER],
&new_node->lower);
}
+ } else {
+ list_add_tail(&new_node->lower, &cache->leaves);
}
rb_node = tree_insert(&cache->rb_root, new_node->bytenr,
static int scrub_submit(struct scrub_dev *sdev)
{
struct scrub_bio *sbio;
- struct bio *bio;
- int i;
if (sdev->curr == -1)
return 0;
sbio = sdev->bios[sdev->curr];
-
- bio = bio_alloc(GFP_NOFS, sbio->count);
- if (!bio)
- goto nomem;
-
- bio->bi_private = sbio;
- bio->bi_end_io = scrub_bio_end_io;
- bio->bi_bdev = sdev->dev->bdev;
- bio->bi_sector = sbio->physical >> 9;
-
- for (i = 0; i < sbio->count; ++i) {
- struct page *page;
- int ret;
-
- page = alloc_page(GFP_NOFS);
- if (!page)
- goto nomem;
-
- ret = bio_add_page(bio, page, PAGE_SIZE, 0);
- if (!ret) {
- __free_page(page);
- goto nomem;
- }
- }
-
sbio->err = 0;
sdev->curr = -1;
atomic_inc(&sdev->in_flight);
- submit_bio(READ, bio);
+ submit_bio(READ, sbio->bio);
return 0;
-
-nomem:
- scrub_free_bio(bio);
-
- return -ENOMEM;
}
static int scrub_page(struct scrub_dev *sdev, u64 logical, u64 len,
u8 *csum, int force)
{
struct scrub_bio *sbio;
+ struct page *page;
+ int ret;
again:
/*
}
sbio = sdev->bios[sdev->curr];
if (sbio->count == 0) {
+ struct bio *bio;
+
sbio->physical = physical;
sbio->logical = logical;
+ bio = bio_alloc(GFP_NOFS, SCRUB_PAGES_PER_BIO);
+ if (!bio)
+ return -ENOMEM;
+
+ bio->bi_private = sbio;
+ bio->bi_end_io = scrub_bio_end_io;
+ bio->bi_bdev = sdev->dev->bdev;
+ bio->bi_sector = sbio->physical >> 9;
+ sbio->err = 0;
+ sbio->bio = bio;
} else if (sbio->physical + sbio->count * PAGE_SIZE != physical ||
sbio->logical + sbio->count * PAGE_SIZE != logical) {
- int ret;
-
ret = scrub_submit(sdev);
if (ret)
return ret;
sbio->spag[sbio->count].generation = gen;
sbio->spag[sbio->count].have_csum = 0;
sbio->spag[sbio->count].mirror_num = mirror_num;
+
+ page = alloc_page(GFP_NOFS);
+ if (!page)
+ return -ENOMEM;
+
+ ret = bio_add_page(sbio->bio, page, PAGE_SIZE, 0);
+ if (!ret) {
+ __free_page(page);
+ ret = scrub_submit(sdev);
+ if (ret)
+ return ret;
+ goto again;
+ }
+
if (csum) {
sbio->spag[sbio->count].have_csum = 1;
memcpy(sbio->spag[sbio->count].csum, csum, sdev->csum_size);
{Opt_subvolrootid, "subvolrootid=%d"},
{Opt_defrag, "autodefrag"},
{Opt_inode_cache, "inode_cache"},
- {Opt_no_space_cache, "no_space_cache"},
+ {Opt_no_space_cache, "nospace_cache"},
{Opt_recovery, "recovery"},
{Opt_err, NULL},
};
token = match_token(p, tokens, args);
switch (token) {
case Opt_subvol:
+ kfree(*subvol_name);
*subvol_name = match_strdup(&args[0]);
break;
case Opt_subvolid:
if (btrfs_test_opt(root, SPACE_CACHE))
seq_puts(seq, ",space_cache");
else
- seq_puts(seq, ",no_space_cache");
+ seq_puts(seq, ",nospace_cache");
if (btrfs_test_opt(root, CLEAR_CACHE))
seq_puts(seq, ",clear_cache");
if (btrfs_test_opt(root, USER_SUBVOL_RM_ALLOWED))
static struct dentry *mount_subvol(const char *subvol_name, int flags,
const char *device_name, char *data)
{
- struct super_block *s;
struct dentry *root;
struct vfsmount *mnt;
- struct mnt_namespace *ns_private;
char *newargs;
- struct path path;
- int error;
newargs = setup_root_args(data);
if (!newargs)
if (IS_ERR(mnt))
return ERR_CAST(mnt);
- ns_private = create_mnt_ns(mnt);
- if (IS_ERR(ns_private)) {
- mntput(mnt);
- return ERR_CAST(ns_private);
- }
-
- /*
- * This will trigger the automount of the subvol so we can just
- * drop the mnt we have here and return the dentry that we
- * found.
- */
- error = vfs_path_lookup(mnt->mnt_root, mnt, subvol_name,
- LOOKUP_FOLLOW, &path);
- put_mnt_ns(ns_private);
- if (error)
- return ERR_PTR(error);
+ root = mount_subtree(mnt, subvol_name);
- if (!is_subvolume_inode(path.dentry->d_inode)) {
- path_put(&path);
- mntput(mnt);
- error = -EINVAL;
+ if (!IS_ERR(root) && !is_subvolume_inode(root->d_inode)) {
+ struct super_block *s = root->d_sb;
+ dput(root);
+ root = ERR_PTR(-EINVAL);
+ deactivate_locked_super(s);
printk(KERN_ERR "btrfs: '%s' is not a valid subvolume\n",
subvol_name);
- return ERR_PTR(-EINVAL);
}
- /* Get a ref to the sb and the dentry we found and return it */
- s = path.mnt->mnt_sb;
- atomic_inc(&s->s_active);
- root = dget(path.dentry);
- path_put(&path);
- down_write(&s->s_umount);
-
return root;
}
struct super_block *s;
struct dentry *root;
struct btrfs_fs_devices *fs_devices = NULL;
- struct btrfs_root *tree_root = NULL;
struct btrfs_fs_info *fs_info = NULL;
fmode_t mode = FMODE_READ;
char *subvol_name = NULL;
error = btrfs_parse_early_options(data, mode, fs_type,
&subvol_name, &subvol_objectid,
&subvol_rootid, &fs_devices);
- if (error)
+ if (error) {
+ kfree(subvol_name);
return ERR_PTR(error);
+ }
if (subvol_name) {
root = mount_subvol(subvol_name, flags, device_name, data);
if (error)
return ERR_PTR(error);
- error = btrfs_open_devices(fs_devices, mode, fs_type);
- if (error)
- return ERR_PTR(error);
-
- if (!(flags & MS_RDONLY) && fs_devices->rw_devices == 0) {
- error = -EACCES;
- goto error_close_devices;
- }
-
/*
* Setup a dummy root and fs_info for test/set super. This is because
* we don't actually fill this stuff out until open_ctree, but we need
* then open_ctree will properly initialize everything later.
*/
fs_info = kzalloc(sizeof(struct btrfs_fs_info), GFP_NOFS);
- tree_root = kzalloc(sizeof(struct btrfs_root), GFP_NOFS);
- if (!fs_info || !tree_root) {
+ if (!fs_info)
+ return ERR_PTR(-ENOMEM);
+
+ fs_info->tree_root = kzalloc(sizeof(struct btrfs_root), GFP_NOFS);
+ if (!fs_info->tree_root) {
error = -ENOMEM;
- goto error_close_devices;
+ goto error_fs_info;
}
- fs_info->tree_root = tree_root;
+ fs_info->tree_root->fs_info = fs_info;
fs_info->fs_devices = fs_devices;
- tree_root->fs_info = fs_info;
fs_info->super_copy = kzalloc(BTRFS_SUPER_INFO_SIZE, GFP_NOFS);
fs_info->super_for_commit = kzalloc(BTRFS_SUPER_INFO_SIZE, GFP_NOFS);
if (!fs_info->super_copy || !fs_info->super_for_commit) {
error = -ENOMEM;
+ goto error_fs_info;
+ }
+
+ error = btrfs_open_devices(fs_devices, mode, fs_type);
+ if (error)
+ goto error_fs_info;
+
+ if (!(flags & MS_RDONLY) && fs_devices->rw_devices == 0) {
+ error = -EACCES;
goto error_close_devices;
}
bdev = fs_devices->latest_bdev;
- s = sget(fs_type, btrfs_test_super, btrfs_set_super, tree_root);
+ s = sget(fs_type, btrfs_test_super, btrfs_set_super,
+ fs_info->tree_root);
if (IS_ERR(s)) {
error = PTR_ERR(s);
goto error_close_devices;
if (s->s_root) {
if ((flags ^ s->s_flags) & MS_RDONLY) {
deactivate_locked_super(s);
- return ERR_PTR(-EBUSY);
+ error = -EBUSY;
+ goto error_close_devices;
}
btrfs_close_devices(fs_devices);
free_fs_info(fs_info);
- kfree(tree_root);
} else {
char b[BDEVNAME_SIZE];
error_close_devices:
btrfs_close_devices(fs_devices);
+error_fs_info:
free_fs_info(fs_info);
- kfree(tree_root);
return ERR_PTR(error);
}
btrfs_reloc_pre_snapshot(trans, pending, &to_reserve);
if (to_reserve > 0) {
- ret = btrfs_block_rsv_add(root, &pending->block_rsv,
- to_reserve);
+ ret = btrfs_block_rsv_add_noflush(root, &pending->block_rsv,
+ to_reserve);
if (ret) {
pending->error = ret;
goto fail;
key.objectid = device->devid;
key.offset = start;
key.type = BTRFS_DEV_EXTENT_KEY;
-
+again:
ret = btrfs_search_slot(trans, root, &key, path, -1, 1);
if (ret > 0) {
ret = btrfs_previous_item(root, path, key.objectid,
struct btrfs_dev_extent);
BUG_ON(found_key.offset > start || found_key.offset +
btrfs_dev_extent_length(leaf, extent) < start);
+ key = found_key;
+ btrfs_release_path(path);
+ goto again;
} else if (ret == 0) {
leaf = path->nodes[0];
extent = btrfs_item_ptr(leaf, path->slots[0],
{
struct ceph_dentry_info *di;
- dout("d_release %p\n", dentry);
+ dout("ceph_d_prune %p\n", dentry);
/* do we have a valid parent? */
if (!dentry->d_parent || IS_ROOT(dentry))
*/
void ceph_queue_writeback(struct inode *inode)
{
+ ihold(inode);
if (queue_work(ceph_inode_to_client(inode)->wb_wq,
&ceph_inode(inode)->i_wb_work)) {
dout("ceph_queue_writeback %p\n", inode);
- ihold(inode);
} else {
dout("ceph_queue_writeback %p failed\n", inode);
+ iput(inode);
}
}
*/
void ceph_queue_invalidate(struct inode *inode)
{
+ ihold(inode);
if (queue_work(ceph_inode_to_client(inode)->pg_inv_wq,
&ceph_inode(inode)->i_pg_inv_work)) {
dout("ceph_queue_invalidate %p\n", inode);
- ihold(inode);
} else {
dout("ceph_queue_invalidate %p failed\n", inode);
+ iput(inode);
}
}
{
struct ceph_inode_info *ci = ceph_inode(inode);
+ ihold(inode);
if (queue_work(ceph_sb_to_client(inode->i_sb)->trunc_wq,
&ci->i_vmtruncate_work)) {
dout("ceph_queue_vmtruncate %p\n", inode);
- ihold(inode);
} else {
dout("ceph_queue_vmtruncate %p failed, pending=%d\n",
inode, ci->i_truncate_pending);
+ iput(inode);
}
}
if (err == 0) {
dout("open_root_inode success\n");
if (ceph_ino(req->r_target_inode) == CEPH_INO_ROOT &&
- fsc->sb->s_root == NULL)
+ fsc->sb->s_root == NULL) {
root = d_alloc_root(req->r_target_inode);
- else
+ ceph_init_dentry(root);
+ } else {
root = d_obtain_alias(req->r_target_inode);
+ }
req->r_target_inode = NULL;
dout("open_root_inode success, root dentry is %p\n", root);
} else {
#include <linux/bit_spinlock.h>
#include <linux/rculist_bl.h>
#include <linux/prefetch.h>
+#include <linux/ratelimit.h>
#include "internal.h"
/*
actual = __d_unalias(inode, dentry, alias);
}
write_sequnlock(&rename_lock);
- if (IS_ERR(actual))
+ if (IS_ERR(actual)) {
+ if (PTR_ERR(actual) == -ELOOP)
+ pr_warn_ratelimited(
+ "VFS: Lookup of '%s' in %s %s"
+ " would have caused loop\n",
+ dentry->d_name.name,
+ inode->i_sb->s_type->name,
+ inode->i_sb->s_id);
dput(alias);
+ }
goto out_nolock;
}
}
brelse(bitmap_bh);
printk(KERN_DEBUG "ext4_count_free_clusters: stored = %llu"
", computed = %llu, %llu\n",
- EXT4_B2C(sbi, ext4_free_blocks_count(es)),
+ EXT4_B2C(EXT4_SB(sb), ext4_free_blocks_count(es)),
desc_count, bitmap_count);
return bitmap_count;
#else
ext4_msg(inode->i_sb, KERN_CRIT, "%s: jbd2_start: "
"%ld pages, ino %lu; err %d", __func__,
wbc->nr_to_write, inode->i_ino, ret);
+ blk_finish_plug(&plug);
goto out_writepages;
}
data_opt = EXT4_MOUNT_WRITEBACK_DATA;
datacheck:
if (is_remount) {
- if (test_opt(sb, DATA_FLAGS) != data_opt) {
+ if (!sbi->s_journal)
+ ext4_msg(sb, KERN_WARNING, "Remounting file system with no journal so ignoring journalled data option");
+ else if (test_opt(sb, DATA_FLAGS) != data_opt) {
ext4_msg(sb, KERN_ERR,
"Cannot change data mode on remount");
return 0;
}
static int ext4_fill_super(struct super_block *sb, void *data, int silent)
- __releases(kernel_lock)
- __acquires(kernel_lock)
{
char *orig_data = kstrdup(data, GFP_KERNEL);
struct buffer_head *bh;
src = in->name;
srclen = in->len;
+ if (srclen > HFS_NAMELEN)
+ srclen = HFS_NAMELEN;
dst = out;
dstlen = HFS_MAX_NAMELEN;
if (nls_io) {
#include <linux/bitops.h>
#include <linux/sched.h>
-static const int nibblemap[] = { 4,3,3,2,3,2,2,1,3,2,2,1,2,1,1,0 };
-
static DEFINE_SPINLOCK(bitmap_lock);
-static unsigned long count_free(struct buffer_head *map[], unsigned numblocks, __u32 numbits)
+/*
+ * bitmap consists of blocks filled with 16bit words
+ * bit set == busy, bit clear == free
+ * endianness is a mess, but for counting zero bits it really doesn't matter...
+ */
+static __u32 count_free(struct buffer_head *map[], unsigned blocksize, __u32 numbits)
{
- unsigned i, j, sum = 0;
- struct buffer_head *bh;
-
- for (i=0; i<numblocks-1; i++) {
- if (!(bh=map[i]))
- return(0);
- for (j=0; j<bh->b_size; j++)
- sum += nibblemap[bh->b_data[j] & 0xf]
- + nibblemap[(bh->b_data[j]>>4) & 0xf];
- }
+ __u32 sum = 0;
+ unsigned blocks = DIV_ROUND_UP(numbits, blocksize * 8);
- if (numblocks==0 || !(bh=map[numblocks-1]))
- return(0);
- i = ((numbits - (numblocks-1) * bh->b_size * 8) / 16) * 2;
- for (j=0; j<i; j++) {
- sum += nibblemap[bh->b_data[j] & 0xf]
- + nibblemap[(bh->b_data[j]>>4) & 0xf];
+ while (blocks--) {
+ unsigned words = blocksize / 2;
+ __u16 *p = (__u16 *)(*map++)->b_data;
+ while (words--)
+ sum += 16 - hweight16(*p++);
}
- i = numbits%16;
- if (i!=0) {
- i = *(__u16 *)(&bh->b_data[j]) | ~((1<<i) - 1);
- sum += nibblemap[i & 0xf] + nibblemap[(i>>4) & 0xf];
- sum += nibblemap[(i>>8) & 0xf] + nibblemap[(i>>12) & 0xf];
- }
- return(sum);
+ return sum;
}
void minix_free_block(struct inode *inode, unsigned long block)
return 0;
}
-unsigned long minix_count_free_blocks(struct minix_sb_info *sbi)
+unsigned long minix_count_free_blocks(struct super_block *sb)
{
- return (count_free(sbi->s_zmap, sbi->s_zmap_blocks,
- sbi->s_nzones - sbi->s_firstdatazone + 1)
+ struct minix_sb_info *sbi = minix_sb(sb);
+ u32 bits = sbi->s_nzones - (sbi->s_firstdatazone + 1);
+
+ return (count_free(sbi->s_zmap, sb->s_blocksize, bits)
<< sbi->s_log_zone_size);
}
return inode;
}
-unsigned long minix_count_free_inodes(struct minix_sb_info *sbi)
+unsigned long minix_count_free_inodes(struct super_block *sb)
{
- return count_free(sbi->s_imap, sbi->s_imap_blocks, sbi->s_ninodes + 1);
+ struct minix_sb_info *sbi = minix_sb(sb);
+ u32 bits = sbi->s_ninodes + 1;
+
+ return count_free(sbi->s_imap, sb->s_blocksize, bits);
}
else if (sbi->s_mount_state & MINIX_ERROR_FS)
printk("MINIX-fs: mounting file system with errors, "
"running fsck is recommended\n");
+
+ /* Apparently minix can create filesystems that allocate more blocks for
+ * the bitmaps than needed. We simply ignore that, but verify it didn't
+ * create one with not enough blocks and bail out if so.
+ */
+ block = minix_blocks_needed(sbi->s_ninodes, s->s_blocksize);
+ if (sbi->s_imap_blocks < block) {
+ printk("MINIX-fs: file system does not have enough "
+ "imap blocks allocated. Refusing to mount\n");
+ goto out_iput;
+ }
+
+ block = minix_blocks_needed(
+ (sbi->s_nzones - (sbi->s_firstdatazone + 1)),
+ s->s_blocksize);
+ if (sbi->s_zmap_blocks < block) {
+ printk("MINIX-fs: file system does not have enough "
+ "zmap blocks allocated. Refusing to mount.\n");
+ goto out_iput;
+ }
+
return 0;
out_iput:
buf->f_type = sb->s_magic;
buf->f_bsize = sb->s_blocksize;
buf->f_blocks = (sbi->s_nzones - sbi->s_firstdatazone) << sbi->s_log_zone_size;
- buf->f_bfree = minix_count_free_blocks(sbi);
+ buf->f_bfree = minix_count_free_blocks(sb);
buf->f_bavail = buf->f_bfree;
buf->f_files = sbi->s_ninodes;
- buf->f_ffree = minix_count_free_inodes(sbi);
+ buf->f_ffree = minix_count_free_inodes(sb);
buf->f_namelen = sbi->s_namelen;
buf->f_fsid.val[0] = (u32)id;
buf->f_fsid.val[1] = (u32)(id >> 32);
extern struct minix2_inode * minix_V2_raw_inode(struct super_block *, ino_t, struct buffer_head **);
extern struct inode * minix_new_inode(const struct inode *, int, int *);
extern void minix_free_inode(struct inode * inode);
-extern unsigned long minix_count_free_inodes(struct minix_sb_info *sbi);
+extern unsigned long minix_count_free_inodes(struct super_block *sb);
extern int minix_new_block(struct inode * inode);
extern void minix_free_block(struct inode *inode, unsigned long block);
-extern unsigned long minix_count_free_blocks(struct minix_sb_info *sbi);
+extern unsigned long minix_count_free_blocks(struct super_block *sb);
extern int minix_getattr(struct vfsmount *, struct dentry *, struct kstat *);
extern int minix_prepare_chunk(struct page *page, loff_t pos, unsigned len);
return list_entry(inode, struct minix_inode_info, vfs_inode);
}
+static inline unsigned minix_blocks_needed(unsigned bits, unsigned blocksize)
+{
+ return DIV_ROUND_UP(bits, blocksize * 8);
+}
+
#if defined(CONFIG_MINIX_FS_NATIVE_ENDIAN) && \
defined(CONFIG_MINIX_FS_BIG_ENDIAN_16BIT_INDEXED)
if (!size)
return 0;
- size = (size >> 4) + ((size & 15) > 0);
+ size >>= 4;
while (*p++ == 0xffff) {
if (--size == 0)
return (p - addr) << 4;
__mnt_make_longterm(mnt);
new_ns->root = mnt;
list_add(&new_ns->list, &new_ns->root->mnt_list);
+ } else {
+ mntput(mnt);
}
return new_ns;
}
EXPORT_SYMBOL(create_mnt_ns);
+struct dentry *mount_subtree(struct vfsmount *mnt, const char *name)
+{
+ struct mnt_namespace *ns;
+ struct path path;
+ int err;
+
+ ns = create_mnt_ns(mnt);
+ if (IS_ERR(ns))
+ return ERR_CAST(ns);
+
+ err = vfs_path_lookup(mnt->mnt_root, mnt,
+ name, LOOKUP_FOLLOW|LOOKUP_AUTOMOUNT, &path);
+
+ put_mnt_ns(ns);
+
+ if (err)
+ return ERR_PTR(err);
+
+ /* trade a vfsmount reference for active sb one */
+ atomic_inc(&path.mnt->mnt_sb->s_active);
+ mntput(path.mnt);
+ /* lock the sucker */
+ down_write(&path.mnt->mnt_sb->s_umount);
+ /* ... and return the root of (sub)tree on it */
+ return path.dentry;
+}
+EXPORT_SYMBOL(mount_subtree);
+
SYSCALL_DEFINE5(mount, char __user *, dev_name, char __user *, dir_name,
char __user *, type, unsigned long, flags, void __user *, data)
{
static struct dentry *nfs_follow_remote_path(struct vfsmount *root_mnt,
const char *export_path)
{
- struct mnt_namespace *ns_private;
- struct super_block *s;
struct dentry *dentry;
- struct path path;
- int ret;
-
- ns_private = create_mnt_ns(root_mnt);
- ret = PTR_ERR(ns_private);
- if (IS_ERR(ns_private))
- goto out_mntput;
-
- ret = nfs_referral_loop_protect();
- if (ret != 0)
- goto out_put_mnt_ns;
+ int ret = nfs_referral_loop_protect();
- ret = vfs_path_lookup(root_mnt->mnt_root, root_mnt,
- export_path, LOOKUP_FOLLOW|LOOKUP_AUTOMOUNT, &path);
+ if (ret) {
+ mntput(root_mnt);
+ return ERR_PTR(ret);
+ }
+ dentry = mount_subtree(root_mnt, export_path);
nfs_referral_loop_unprotect();
- put_mnt_ns(ns_private);
-
- if (ret != 0)
- goto out_err;
-
- s = path.mnt->mnt_sb;
- atomic_inc(&s->s_active);
- dentry = dget(path.dentry);
- path_put(&path);
- down_write(&s->s_umount);
return dentry;
-out_put_mnt_ns:
- put_mnt_ns(ns_private);
-out_mntput:
- mntput(root_mnt);
-out_err:
- return ERR_PTR(ret);
}
static struct dentry *nfs4_try_mount(int flags, const char *dev_name,
return error;
}
-static int proc_pid_fd_link_getattr(struct vfsmount *mnt, struct dentry *dentry,
- struct kstat *stat)
-{
- struct inode *inode = dentry->d_inode;
- struct task_struct *task = get_proc_task(inode);
- int rc;
-
- if (task == NULL)
- return -ESRCH;
-
- rc = -EACCES;
- if (lock_trace(task))
- goto out_task;
-
- generic_fillattr(inode, stat);
- unlock_trace(task);
- rc = 0;
-out_task:
- put_task_struct(task);
- return rc;
-}
-
static const struct inode_operations proc_pid_link_inode_operations = {
.readlink = proc_pid_readlink,
.follow_link = proc_pid_follow_link,
.setattr = proc_setattr,
};
-static const struct inode_operations proc_fdinfo_link_inode_operations = {
- .setattr = proc_setattr,
- .getattr = proc_pid_fd_link_getattr,
-};
-
-static const struct inode_operations proc_fd_link_inode_operations = {
- .readlink = proc_pid_readlink,
- .follow_link = proc_pid_follow_link,
- .setattr = proc_setattr,
- .getattr = proc_pid_fd_link_getattr,
-};
-
/* building an inode */
static int proc_fd_info(struct inode *inode, struct path *path, char *info)
{
- struct task_struct *task;
- struct files_struct *files;
+ struct task_struct *task = get_proc_task(inode);
+ struct files_struct *files = NULL;
struct file *file;
int fd = proc_fd(inode);
- int rc;
-
- task = get_proc_task(inode);
- if (!task)
- return -ENOENT;
-
- rc = -EACCES;
- if (lock_trace(task))
- goto out_task;
-
- rc = -ENOENT;
- files = get_files_struct(task);
- if (files == NULL)
- goto out_unlock;
- /*
- * We are not taking a ref to the file structure, so we must
- * hold ->file_lock.
- */
- spin_lock(&files->file_lock);
- file = fcheck_files(files, fd);
- if (file) {
- unsigned int f_flags;
- struct fdtable *fdt;
-
- fdt = files_fdtable(files);
- f_flags = file->f_flags & ~O_CLOEXEC;
- if (FD_ISSET(fd, fdt->close_on_exec))
- f_flags |= O_CLOEXEC;
-
- if (path) {
- *path = file->f_path;
- path_get(&file->f_path);
+ if (task) {
+ files = get_files_struct(task);
+ put_task_struct(task);
+ }
+ if (files) {
+ /*
+ * We are not taking a ref to the file structure, so we must
+ * hold ->file_lock.
+ */
+ spin_lock(&files->file_lock);
+ file = fcheck_files(files, fd);
+ if (file) {
+ unsigned int f_flags;
+ struct fdtable *fdt;
+
+ fdt = files_fdtable(files);
+ f_flags = file->f_flags & ~O_CLOEXEC;
+ if (FD_ISSET(fd, fdt->close_on_exec))
+ f_flags |= O_CLOEXEC;
+
+ if (path) {
+ *path = file->f_path;
+ path_get(&file->f_path);
+ }
+ if (info)
+ snprintf(info, PROC_FDINFO_MAX,
+ "pos:\t%lli\n"
+ "flags:\t0%o\n",
+ (long long) file->f_pos,
+ f_flags);
+ spin_unlock(&files->file_lock);
+ put_files_struct(files);
+ return 0;
}
- if (info)
- snprintf(info, PROC_FDINFO_MAX,
- "pos:\t%lli\n"
- "flags:\t0%o\n",
- (long long) file->f_pos,
- f_flags);
- rc = 0;
- } else
- rc = -ENOENT;
- spin_unlock(&files->file_lock);
- put_files_struct(files);
-
-out_unlock:
- unlock_trace(task);
-out_task:
- put_task_struct(task);
- return rc;
+ spin_unlock(&files->file_lock);
+ put_files_struct(files);
+ }
+ return -ENOENT;
}
static int proc_fd_link(struct inode *inode, struct path *path)
spin_unlock(&files->file_lock);
put_files_struct(files);
- inode->i_op = &proc_fd_link_inode_operations;
+ inode->i_op = &proc_pid_link_inode_operations;
inode->i_size = 64;
ei->op.proc_get_link = proc_fd_link;
d_set_d_op(dentry, &tid_fd_dentry_operations);
if (fd == ~0U)
goto out;
- result = ERR_PTR(-EACCES);
- if (lock_trace(task))
- goto out;
-
result = instantiate(dir, dentry, task, &fd);
- unlock_trace(task);
out:
put_task_struct(task);
out_no_task:
retval = -ENOENT;
if (!p)
goto out_no_task;
-
- retval = -EACCES;
- if (lock_trace(p))
- goto out;
-
retval = 0;
fd = filp->f_pos;
switch (fd) {
case 0:
if (filldir(dirent, ".", 1, 0, inode->i_ino, DT_DIR) < 0)
- goto out_unlock;
+ goto out;
filp->f_pos++;
case 1:
ino = parent_ino(dentry);
if (filldir(dirent, "..", 2, 1, ino, DT_DIR) < 0)
- goto out_unlock;
+ goto out;
filp->f_pos++;
default:
files = get_files_struct(p);
if (!files)
- goto out_unlock;
+ goto out;
rcu_read_lock();
for (fd = filp->f_pos-2;
fd < files_fdtable(files)->max_fds;
rcu_read_unlock();
put_files_struct(files);
}
-
-out_unlock:
- unlock_trace(p);
out:
put_task_struct(p);
out_no_task:
ei->fd = fd;
inode->i_mode = S_IFREG | S_IRUSR;
inode->i_fop = &proc_fdinfo_file_operations;
- inode->i_op = &proc_fdinfo_link_inode_operations;
d_set_d_op(dentry, &tid_fd_dentry_operations);
d_add(dentry, inode);
/* Close the race of the process dying before we return the dentry */
int error = 0;
if (XFS_FORCED_SHUTDOWN(ip->i_mount)) {
- error = -EIO;
+ ioend->io_error = -EIO;
goto done;
}
if (ioend->io_error)
/*
* This is the ops vector shared by all buf log items.
*/
-static struct xfs_item_ops xfs_buf_item_ops = {
+static const struct xfs_item_ops xfs_buf_item_ops = {
.iop_size = xfs_buf_item_size,
.iop_format = xfs_buf_item_format,
.iop_pin = xfs_buf_item_pin,
/*
* This is the ops vector for dquots
*/
-static struct xfs_item_ops xfs_dquot_item_ops = {
+static const struct xfs_item_ops xfs_dquot_item_ops = {
.iop_size = xfs_qm_dquot_logitem_size,
.iop_format = xfs_qm_dquot_logitem_format,
.iop_pin = xfs_qm_dquot_logitem_pin,
{
}
-static struct xfs_item_ops xfs_qm_qoffend_logitem_ops = {
+static const struct xfs_item_ops xfs_qm_qoffend_logitem_ops = {
.iop_size = xfs_qm_qoff_logitem_size,
.iop_format = xfs_qm_qoff_logitem_format,
.iop_pin = xfs_qm_qoff_logitem_pin,
/*
* This is the ops vector shared by all quotaoff-start log items.
*/
-static struct xfs_item_ops xfs_qm_qoff_logitem_ops = {
+static const struct xfs_item_ops xfs_qm_qoff_logitem_ops = {
.iop_size = xfs_qm_qoff_logitem_size,
.iop_format = xfs_qm_qoff_logitem_format,
.iop_pin = xfs_qm_qoff_logitem_pin,
/*
* This is the ops vector shared by all efi log items.
*/
-static struct xfs_item_ops xfs_efi_item_ops = {
+static const struct xfs_item_ops xfs_efi_item_ops = {
.iop_size = xfs_efi_item_size,
.iop_format = xfs_efi_item_format,
.iop_pin = xfs_efi_item_pin,
/*
* This is the ops vector shared by all efd log items.
*/
-static struct xfs_item_ops xfs_efd_item_ops = {
+static const struct xfs_item_ops xfs_efd_item_ops = {
.iop_size = xfs_efd_item_size,
.iop_format = xfs_efd_item_format,
.iop_pin = xfs_efd_item_pin,
/*
* This is the ops vector shared by all buf log items.
*/
-static struct xfs_item_ops xfs_inode_item_ops = {
+static const struct xfs_item_ops xfs_inode_item_ops = {
.iop_size = xfs_inode_item_size,
.iop_format = xfs_inode_item_format,
.iop_pin = xfs_inode_item_pin,
struct xfs_mount *mp,
struct xfs_log_item *item,
int type,
- struct xfs_item_ops *ops)
+ const struct xfs_item_ops *ops)
{
item->li_mountp = mp;
item->li_ailp = mp->m_ail;
void xfs_log_item_init(struct xfs_mount *mp,
struct xfs_log_item *item,
int type,
- struct xfs_item_ops *ops);
+ const struct xfs_item_ops *ops);
xfs_lsn_t xfs_log_done(struct xfs_mount *mp,
struct xlog_ticket *ticket,
* disk and we didn't ask it to allocate;
* ESRCH if quotas got turned off suddenly.
*/
- error = xfs_qm_dqget(ip->i_mount, ip, id, type, XFS_QMOPT_DOWARN, &dqp);
+ error = xfs_qm_dqget(ip->i_mount, ip, id, type,
+ doalloc | XFS_QMOPT_DOWARN, &dqp);
if (error)
return error;
struct xfs_log_item *);
/* buffer item iodone */
/* callback func */
- struct xfs_item_ops *li_ops; /* function list */
+ const struct xfs_item_ops *li_ops; /* function list */
/* delayed logging */
struct list_head li_cil; /* CIL pointers */
{ XFS_LI_IN_AIL, "IN_AIL" }, \
{ XFS_LI_ABORTED, "ABORTED" }
-typedef struct xfs_item_ops {
+struct xfs_item_ops {
uint (*iop_size)(xfs_log_item_t *);
void (*iop_format)(xfs_log_item_t *, struct xfs_log_iovec *);
void (*iop_pin)(xfs_log_item_t *);
void (*iop_push)(xfs_log_item_t *);
bool (*iop_pushbuf)(xfs_log_item_t *);
void (*iop_committing)(xfs_log_item_t *, xfs_lsn_t);
-} xfs_item_ops_t;
+};
#define IOP_SIZE(ip) (*(ip)->li_ops->iop_size)(ip)
#define IOP_FORMAT(ip,vp) (*(ip)->li_ops->iop_format)(ip, vp)
char *link)
{
xfs_mount_t *mp = ip->i_mount;
- int pathlen;
+ xfs_fsize_t pathlen;
int error = 0;
trace_xfs_readlink(ip);
xfs_ilock(ip, XFS_ILOCK_SHARED);
- ASSERT(S_ISLNK(ip->i_d.di_mode));
- ASSERT(ip->i_d.di_size <= MAXPATHLEN);
-
pathlen = ip->i_d.di_size;
if (!pathlen)
goto out;
+ if (pathlen < 0 || pathlen > MAXPATHLEN) {
+ xfs_alert(mp, "%s: inode (%llu) bad symlink length (%lld)",
+ __func__, (unsigned long long) ip->i_ino,
+ (long long) pathlen);
+ ASSERT(0);
+ return XFS_ERROR(EFSCORRUPTED);
+ }
+
+
if (ip->i_df.if_flags & XFS_IFINLINE) {
memcpy(link, ip->i_df.if_u1.if_data, pathlen);
link[pathlen] = '\0';
struct proc_dir_entry *proc_root; /**< proc directory entry */
struct drm_info_node proc_nodes;
struct dentry *debugfs_root;
- struct drm_info_node debugfs_nodes;
+
+ struct list_head debugfs_list;
+ struct mutex debugfs_lock; /* Protects debugfs_list. */
struct drm_master *master; /* currently active master for this node */
struct list_head master_list;
*/
#define radeon_PCI_IDS \
{0x1002, 0x3150, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY}, \
+ {0x1002, 0x3151, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x3152, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x3154, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x3155, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x4C64, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV250|RADEON_IS_MOBILITY}, \
{0x1002, 0x4C66, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV250|RADEON_IS_MOBILITY}, \
{0x1002, 0x4C67, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV250|RADEON_IS_MOBILITY}, \
+ {0x1002, 0x4C6E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280|RADEON_IS_MOBILITY}, \
{0x1002, 0x4E44, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \
{0x1002, 0x4E45, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \
{0x1002, 0x4E46, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \
* - this size value would be page-aligned internally.
* @flags: user request for setting memory type or cache attributes.
* @handle: returned handle for the object.
+ * @pad: just padding to be 64-bit aligned.
*/
struct drm_exynos_gem_create {
unsigned int size;
unsigned int flags;
unsigned int handle;
+ unsigned int pad;
};
/**
extern struct bio_set *bioset_create(unsigned int, unsigned int);
extern void bioset_free(struct bio_set *);
-extern struct bio *bio_alloc(gfp_t, int);
-extern struct bio *bio_kmalloc(gfp_t, int);
+extern struct bio *bio_alloc(gfp_t, unsigned int);
+extern struct bio *bio_kmalloc(gfp_t, unsigned int);
extern struct bio *bio_alloc_bioset(gfp_t, int, struct bio_set *);
extern void bio_put(struct bio *);
extern void bio_free(struct bio *, struct bio_set *);
#define bioset_integrity_create(a, b) (0)
#define bio_integrity_prep(a) (0)
#define bio_integrity_enabled(a) (0)
-#define bio_integrity_clone(a, b, c, d) (0)
+static inline int bio_integrity_clone(struct bio *bio, struct bio *bio_src,
+ gfp_t gfp_mask, struct bio_set *bs)
+{
+ return 0;
+}
#define bioset_integrity_free(a) do { } while (0)
#define bio_integrity_free(a, b) do { } while (0)
#define bio_integrity_endio(a, b) do { } while (0)
#include "osdmap.h"
#include "messenger.h"
+/*
+ * Maximum object name size
+ * (must be at least as big as RBD_MAX_MD_NAME_LEN -- currently 100)
+ */
+#define MAX_OBJ_NAME_SIZE 100
+
struct ceph_msg;
struct ceph_snap_context;
struct ceph_osd_request;
struct inode *r_inode; /* for use by callbacks */
void *r_priv; /* ditto */
- char r_oid[40]; /* object name */
+ char r_oid[MAX_OBJ_NAME_SIZE]; /* object name */
int r_oid_len;
unsigned long r_stamp; /* send OR check time */
unsigned long total_time;
unsigned long busy_time;
unsigned long current_frequency;
- void *private_date;
+ void *private_data;
};
/**
* @resume: Called to bring a device on this bus out of sleep mode.
* @pm: Power management operations of this bus, callback the specific
* device driver's pm-ops.
- * @iommu_ops IOMMU specific operations for this bus, used to attach IOMMU
+ * @iommu_ops: IOMMU specific operations for this bus, used to attach IOMMU
* driver implementations to a bus and allow the driver to do
* bus-specific setup
* @p: The private data of the driver core, only the driver core can
return !!dev->power.async_suspend;
}
+static inline void pm_suspend_ignore_children(struct device *dev, bool enable)
+{
+ dev->power.ignore_children = enable;
+}
+
static inline void device_lock(struct device *dev)
{
mutex_lock(&dev->mutex);
extern struct dentry *mount_nodev(struct file_system_type *fs_type,
int flags, void *data,
int (*fill_super)(struct super_block *, void *, int));
+extern struct dentry *mount_subtree(struct vfsmount *mnt, const char *path);
void generic_shutdown_super(struct super_block *sb);
void kill_block_super(struct super_block *sb);
void kill_anon_super(struct super_block *sb);
#define dev_to_part(device) container_of((device), struct hd_struct, __dev)
#define disk_to_dev(disk) (&(disk)->part0.__dev)
#define part_to_dev(part) (&((part)->__dev))
-#define alias_name(disk) ((disk)->alias ? (disk)->alias : \
- (disk)->disk_name)
extern struct device_type part_type;
extern struct kobject *block_depr;
#define DISK_MAX_PARTS 256
#define DISK_NAME_LEN 32
-#define ALIAS_LEN 256
#include <linux/major.h>
#include <linux/device.h>
* disks that can't be partitioned. */
char disk_name[DISK_NAME_LEN]; /* name of major driver */
- char *alias; /* alias name of disk */
char *(*devnode)(struct gendisk *gd, mode_t *mode);
unsigned int events; /* supported events */
#define hugetlb_change_protection(vma, address, end, newprot)
-#ifndef HPAGE_MASK
-#define HPAGE_MASK PAGE_MASK /* Keep the compiler happy */
-#define HPAGE_SIZE PAGE_SIZE
-#endif
-
#endif /* !CONFIG_HUGETLB_PAGE */
#define HUGETLB_ANON_FILE "anon_hugepage"
static inline
void __hwspin_unlock(struct hwspinlock *hwlock, int mode, unsigned long *flags)
{
- return 0;
}
static inline int hwspin_lock_get_id(struct hwspinlock *hwlock)
INET_DIAG_VEGASINFO,
INET_DIAG_CONG,
INET_DIAG_TOS,
+ INET_DIAG_TCLASS,
};
-#define INET_DIAG_MAX INET_DIAG_TOS
+#define INET_DIAG_MAX INET_DIAG_TCLASS
/* INET_DIAG_MEM */
#define KVM_CAP_PPC_SMT 64
#define KVM_CAP_PPC_RMA 65
#define KVM_CAP_MAX_VCPUS 66 /* returns max vcpus per vm */
-#define KVM_CAP_PPC_HIOR 67
#define KVM_CAP_PPC_PAPR 68
#define KVM_CAP_S390_GMAP 71
#define WM8958_MICB2_DISCH_SHIFT 0 /* MICB2_DISCH */
#define WM8958_MICB2_DISCH_WIDTH 1 /* MICB2_DISCH */
+/*
+ * R210 (0xD2) - Mic Detect 3
+ */
+#define WM8958_MICD_LVL_MASK 0x07FC /* MICD_LVL - [10:2] */
+#define WM8958_MICD_LVL_SHIFT 2 /* MICD_LVL - [10:2] */
+#define WM8958_MICD_LVL_WIDTH 9 /* MICD_LVL - [10:2] */
+#define WM8958_MICD_VALID 0x0002 /* MICD_VALID */
+#define WM8958_MICD_VALID_MASK 0x0002 /* MICD_VALID */
+#define WM8958_MICD_VALID_SHIFT 1 /* MICD_VALID */
+#define WM8958_MICD_VALID_WIDTH 1 /* MICD_VALID */
+#define WM8958_MICD_STS 0x0001 /* MICD_STS */
+#define WM8958_MICD_STS_MASK 0x0001 /* MICD_STS */
+#define WM8958_MICD_STS_SHIFT 0 /* MICD_STS */
+#define WM8958_MICD_STS_WIDTH 1 /* MICD_STS */
+
/*
* R76 (0x4C) - Charge Pump (1)
*/
#define PCI_VENDOR_ID_AZWAVE 0x1a3b
+#define PCI_VENDOR_ID_ASMEDIA 0x1b21
+
#define PCI_VENDOR_ID_TEKRAM 0x1de1
#define PCI_DEVICE_ID_TEKRAM_DC290 0xdc29
extern void *pinctrl_dev_get_drvdata(struct pinctrl_dev *pctldev);
#else
+struct pinctrl_dev;
/* Sufficiently stupid default function when pinctrl is not in use */
static inline bool pin_is_valid(struct pinctrl_dev *pctldev, int pin)
unsigned int async_suspend:1;
bool is_prepared:1; /* Owned by the PM core */
bool is_suspended:1; /* Ditto */
+ bool ignore_children:1;
spinlock_t lock;
#ifdef CONFIG_PM_SLEEP
struct list_head entry;
atomic_t usage_count;
atomic_t child_count;
unsigned int disable_depth:3;
- unsigned int ignore_children:1;
unsigned int idle_notification:1;
unsigned int request_pending:1;
unsigned int deferred_resume:1;
|| !atomic_read(&dev->power.child_count);
}
-static inline void pm_suspend_ignore_children(struct device *dev, bool enable)
-{
- dev->power.ignore_children = enable;
-}
-
static inline void pm_runtime_get_noresume(struct device *dev)
{
atomic_inc(&dev->power.usage_count);
static inline void pm_runtime_forbid(struct device *dev) {}
static inline bool pm_children_suspended(struct device *dev) { return false; }
-static inline void pm_suspend_ignore_children(struct device *dev, bool en) {}
static inline void pm_runtime_get_noresume(struct device *dev) {}
static inline void pm_runtime_put_noidle(struct device *dev) {}
static inline bool device_run_wake(struct device *dev) { return false; }
struct serial_rs485 {
__u32 flags; /* RS485 feature flags */
-#define SER_RS485_ENABLED (1 << 0)
-#define SER_RS485_RTS_ON_SEND (1 << 1)
-#define SER_RS485_RTS_AFTER_SEND (1 << 2)
-#define SER_RS485_RTS_BEFORE_SEND (1 << 3)
+#define SER_RS485_ENABLED (1 << 0) /* If enabled */
+#define SER_RS485_RTS_ON_SEND (1 << 1) /* Logical level for
+ RTS pin when
+ sending */
+#define SER_RS485_RTS_AFTER_SEND (1 << 2) /* Logical level for
+ RTS pin after sent*/
#define SER_RS485_RX_DURING_TX (1 << 4)
- __u32 delay_rts_before_send; /* Milliseconds */
- __u32 delay_rts_after_send; /* Milliseconds */
+ __u32 delay_rts_before_send; /* Delay before send (milliseconds) */
+ __u32 delay_rts_after_send; /* Delay after send (milliseconds) */
__u32 padding[5]; /* Memory is cheap, new structs
are a royal PITA .. */
};
SCIx_IRDA_REGTYPE,
SCIx_SCIFA_REGTYPE,
SCIx_SCIFB_REGTYPE,
+ SCIx_SH2_SCIF_FIFODATA_REGTYPE,
SCIx_SH3_SCIF_REGTYPE,
SCIx_SH4_SCIF_REGTYPE,
SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE,
unsigned long arch_flags;
void *priv;
- struct dentry *dentry;
struct clk_mapping *mapping;
struct cpufreq_frequency_table *freq_table;
unsigned int nr_freqs;
long clk_rate_div_range_round(struct clk *clk, unsigned int div_min,
unsigned int div_max, unsigned long rate);
+long clk_rate_mult_range_round(struct clk *clk, unsigned int mult_min,
+ unsigned int mult_max, unsigned long rate);
+
long clk_round_parent(struct clk *clk, unsigned long target,
unsigned long *best_freq, unsigned long *parent_freq,
unsigned int div_min, unsigned int div_max);
int register_pinmux(struct pinmux_info *pip);
int unregister_pinmux(struct pinmux_info *pip);
+/* helper macro for port */
+#define PORT_1(fn, pfx, sfx) fn(pfx, sfx)
+
+#define PORT_10(fn, pfx, sfx) \
+ PORT_1(fn, pfx##0, sfx), PORT_1(fn, pfx##1, sfx), \
+ PORT_1(fn, pfx##2, sfx), PORT_1(fn, pfx##3, sfx), \
+ PORT_1(fn, pfx##4, sfx), PORT_1(fn, pfx##5, sfx), \
+ PORT_1(fn, pfx##6, sfx), PORT_1(fn, pfx##7, sfx), \
+ PORT_1(fn, pfx##8, sfx), PORT_1(fn, pfx##9, sfx)
+
+#define PORT_90(fn, pfx, sfx) \
+ PORT_10(fn, pfx##1, sfx), PORT_10(fn, pfx##2, sfx), \
+ PORT_10(fn, pfx##3, sfx), PORT_10(fn, pfx##4, sfx), \
+ PORT_10(fn, pfx##5, sfx), PORT_10(fn, pfx##6, sfx), \
+ PORT_10(fn, pfx##7, sfx), PORT_10(fn, pfx##8, sfx), \
+ PORT_10(fn, pfx##9, sfx)
+
+#define _PORT_ALL(pfx, sfx) pfx##_##sfx
+#define _GPIO_PORT(pfx, sfx) PINMUX_GPIO(GPIO_PORT##pfx, PORT##pfx##_DATA)
+#define PORT_ALL(str) CPU_ALL_PORT(_PORT_ALL, PORT, str)
+#define GPIO_PORT_ALL() CPU_ALL_PORT(_GPIO_PORT, , unused)
+#define GPIO_FN(str) PINMUX_GPIO(GPIO_FN_##str, str##_MARK)
+
+/* helper macro for pinmux_enum_t */
+#define PORT_DATA_I(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_IN)
+
+#define PORT_DATA_I_PD(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
+ PORT##nr##_IN, PORT##nr##_IN_PD)
+
+#define PORT_DATA_I_PU(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
+ PORT##nr##_IN, PORT##nr##_IN_PU)
+
+#define PORT_DATA_I_PU_PD(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
+ PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
+
+#define PORT_DATA_O(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT)
+
+#define PORT_DATA_IO(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
+ PORT##nr##_IN)
+
+#define PORT_DATA_IO_PD(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
+ PORT##nr##_IN, PORT##nr##_IN_PD)
+
+#define PORT_DATA_IO_PU(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
+ PORT##nr##_IN, PORT##nr##_IN_PU)
+
+#define PORT_DATA_IO_PU_PD(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
+ PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
+
+/* helper macro for top 4 bits in PORTnCR */
+#define _PCRH(in, in_pd, in_pu, out) \
+ 0, (out), (in), 0, \
+ 0, 0, 0, 0, \
+ 0, 0, (in_pd), 0, \
+ 0, 0, (in_pu), 0
+
+#define PORTCR(nr, reg) \
+ { \
+ PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) { \
+ _PCRH(PORT##nr##_IN, PORT##nr##_IN_PD, \
+ PORT##nr##_IN_PU, PORT##nr##_OUT), \
+ PORT##nr##_FN0, PORT##nr##_FN1, \
+ PORT##nr##_FN2, PORT##nr##_FN3, \
+ PORT##nr##_FN4, PORT##nr##_FN5, \
+ PORT##nr##_FN6, PORT##nr##_FN7 } \
+ }
+
#endif /* __SH_PFC_H */
#endif
/* Allocate/destroy a 'vmalloc' VM area. */
-extern struct vm_struct *alloc_vm_area(size_t size);
+extern struct vm_struct *alloc_vm_area(size_t size, pte_t **ptes);
extern void free_vm_area(struct vm_struct *area);
/* for /dev/kmem */
#define L2CAP_DEFAULT_ACK_TO 200
#define L2CAP_LE_DEFAULT_MTU 23
-#define L2CAP_CONN_TIMEOUT (40000) /* 40 seconds */
-#define L2CAP_INFO_TIMEOUT (4000) /* 4 seconds */
+#define L2CAP_DISC_TIMEOUT (100)
+#define L2CAP_DISC_REJ_TIMEOUT (5000) /* 5 seconds */
+#define L2CAP_ENC_TIMEOUT (5000) /* 5 seconds */
+#define L2CAP_CONN_TIMEOUT (40000) /* 40 seconds */
+#define L2CAP_INFO_TIMEOUT (4000) /* 4 seconds */
/* L2CAP socket address */
struct sockaddr_l2 {
* as the AC bitmap in the QoS info field
* @max_sp: max Service Period. same format as the MAX_SP in the
* QoS info field (but already shifted down)
+ * @sta_modify_mask: bitmap indicating which parameters changed
+ * (for those that don't have a natural "no change" value),
+ * see &enum station_parameters_apply_mask
*/
struct station_parameters {
u8 *supported_rates;
* user space MLME/SME implementation. The information is provided for
* the cfg80211_new_sta() calls to notify user space of the IEs.
* @assoc_req_ies_len: Length of assoc_req_ies buffer in octets.
+ * @sta_flags: station flags mask & values
*/
struct station_info {
u32 filled;
static inline int xen_must_unplug_nics(void) {
#if (defined(CONFIG_XEN_NETDEV_FRONTEND) || \
defined(CONFIG_XEN_NETDEV_FRONTEND_MODULE)) && \
- (defined(CONFIG_XEN_PLATFORM_PCI) || \
- defined(CONFIG_XEN_PLATFORM_PCI_MODULE))
+ defined(CONFIG_XEN_PVHVM)
return 1;
#else
return 0;
static inline int xen_must_unplug_disks(void) {
#if (defined(CONFIG_XEN_BLKDEV_FRONTEND) || \
defined(CONFIG_XEN_BLKDEV_FRONTEND_MODULE)) && \
- (defined(CONFIG_XEN_PLATFORM_PCI) || \
- defined(CONFIG_XEN_PLATFORM_PCI_MODULE))
+ defined(CONFIG_XEN_PVHVM)
return 1;
#else
return 0;
struct irq_desc *desc;
int i, ok = 0;
- if (atomic_inc_return(&irq_poll_active) == 1)
+ if (atomic_inc_return(&irq_poll_active) != 1)
goto out;
irq_poll_cpu = smp_processor_id();
static int hibernation_mode = HIBERNATION_SHUTDOWN;
+static bool freezer_test_done;
+
static const struct platform_hibernation_ops *hibernation_ops;
/**
if (error)
goto Close;
+ if (hibernation_test(TEST_FREEZER) ||
+ hibernation_testmode(HIBERNATION_TESTPROC)) {
+
+ /*
+ * Indicate to the caller that we are returning due to a
+ * successful freezer test.
+ */
+ freezer_test_done = true;
+ goto Close;
+ }
+
error = dpm_prepare(PMSG_FREEZE);
if (error)
goto Complete_devices;
if (error)
goto Finish;
- if (hibernation_test(TEST_FREEZER))
- goto Thaw;
-
- if (hibernation_testmode(HIBERNATION_TESTPROC))
- goto Thaw;
-
error = hibernation_snapshot(hibernation_mode == HIBERNATION_PLATFORM);
if (error)
goto Thaw;
+ if (freezer_test_done) {
+ freezer_test_done = false;
+ goto Thaw;
+ }
if (in_suspend) {
unsigned int flags = 0;
if (*s && len == strlen(*s) && !strncmp(buf, *s, len))
break;
}
- if (state < PM_SUSPEND_MAX && *s)
+ if (state < PM_SUSPEND_MAX && *s) {
error = enter_state(state);
if (error) {
suspend_stats.fail++;
dpm_save_failed_errno(error);
} else
suspend_stats.success++;
+ }
#endif
Exit:
};
static struct pm_qos_object cpu_dma_pm_qos = {
.constraints = &cpu_dma_constraints,
+ .name = "cpu_dma_latency",
};
static BLOCKING_NOTIFIER_HEAD(network_lat_notifier);
bdi_unregister(bdi);
+ /*
+ * If bdi_unregister() had already been called earlier, the
+ * wakeup_timer could still be armed because bdi_prune_sb()
+ * can race with the bdi_wakeup_thread_delayed() calls from
+ * __mark_inode_dirty().
+ */
+ del_timer_sync(&bdi->wb.wakeup_timer);
+
for (i = 0; i < NR_BDI_STAT_ITEMS; i++)
percpu_counter_destroy(&bdi->bdi_stat[i]);
* anon_vma prepared.
*/
if (unlikely(anon_vma_prepare(vma))) {
+ page_cache_release(new_page);
+ page_cache_release(old_page);
/* Caller expects lock to be held */
spin_lock(&mm->page_table_lock);
return VM_FAULT_OOM;
* between processes, it syncs the pagetable across all
* processes.
*/
-struct vm_struct *alloc_vm_area(size_t size)
+struct vm_struct *alloc_vm_area(size_t size, pte_t **ptes)
{
BUG();
return NULL;
if (!p)
return 0;
+ if (p->signal->oom_score_adj == OOM_SCORE_ADJ_MIN) {
+ task_unlock(p);
+ return 0;
+ }
+
/*
* The memory controller may have a limit of 0 bytes, so avoid a divide
* by zero, if necessary.
static int f(pte_t *pte, pgtable_t table, unsigned long addr, void *data)
{
- /* apply_to_page_range() does all the hard work. */
+ pte_t ***p = data;
+
+ if (p) {
+ *(*p) = pte;
+ (*p)++;
+ }
return 0;
}
/**
* alloc_vm_area - allocate a range of kernel address space
* @size: size of the area
+ * @ptes: returns the PTEs for the address space
*
* Returns: NULL on failure, vm_struct on success
*
* This function reserves a range of kernel address space, and
* allocates pagetables to map that range. No actual mappings
- * are created. If the kernel address space is not shared
- * between processes, it syncs the pagetable across all
- * processes.
+ * are created.
+ *
+ * If @ptes is non-NULL, pointers to the PTEs (in init_mm)
+ * allocated for the VM area are returned.
*/
-struct vm_struct *alloc_vm_area(size_t size)
+struct vm_struct *alloc_vm_area(size_t size, pte_t **ptes)
{
struct vm_struct *area;
* of kernel virtual address space and mapped into init_mm.
*/
if (apply_to_page_range(&init_mm, (unsigned long)area->addr,
- area->size, f, NULL)) {
+ size, f, ptes ? &ptes : NULL)) {
free_vm_area(area);
return NULL;
}
- /*
- * If the allocated address space is passed to a hypercall
- * before being used then we cannot rely on a page fault to
- * trigger an update of the page tables. So sync all the page
- * tables here.
- */
- vmalloc_sync_all();
-
return area;
}
EXPORT_SYMBOL_GPL(alloc_vm_area);
goto encrypt;
auth:
- if (test_bit(HCI_CONN_ENCRYPT_PEND, &conn->pend))
+ if (test_and_set_bit(HCI_CONN_ENCRYPT_PEND, &conn->pend))
return 0;
if (!hci_conn_auth(conn, sec_level, auth_type))
if (sock_owned_by_user(sk)) {
/* sk is owned by user. Try again later */
- __set_chan_timer(chan, HZ / 5);
+ __set_chan_timer(chan, L2CAP_DISC_TIMEOUT);
bh_unlock_sock(sk);
chan_put(chan);
return;
if (sock_owned_by_user(sk)) {
l2cap_state_change(chan, BT_DISCONN);
__clear_chan_timer(chan);
- __set_chan_timer(chan, HZ / 5);
+ __set_chan_timer(chan, L2CAP_DISC_TIMEOUT);
break;
}
default:
sk->sk_err = ECONNRESET;
- __set_chan_timer(chan, HZ * 5);
+ __set_chan_timer(chan, L2CAP_DISC_REJ_TIMEOUT);
l2cap_send_disconn_req(conn, chan, ECONNRESET);
goto done;
}
if (sock_owned_by_user(sk)) {
l2cap_state_change(chan, BT_DISCONN);
__clear_chan_timer(chan);
- __set_chan_timer(chan, HZ / 5);
+ __set_chan_timer(chan, L2CAP_DISC_TIMEOUT);
bh_unlock_sock(sk);
return 0;
}
if (sock_owned_by_user(sk)) {
l2cap_state_change(chan,BT_DISCONN);
__clear_chan_timer(chan);
- __set_chan_timer(chan, HZ / 5);
+ __set_chan_timer(chan, L2CAP_DISC_TIMEOUT);
bh_unlock_sock(sk);
return 0;
}
if (encrypt == 0x00) {
if (chan->sec_level == BT_SECURITY_MEDIUM) {
__clear_chan_timer(chan);
- __set_chan_timer(chan, HZ * 5);
+ __set_chan_timer(chan, L2CAP_ENC_TIMEOUT);
} else if (chan->sec_level == BT_SECURITY_HIGH)
l2cap_chan_close(chan, ECONNREFUSED);
} else {
L2CAP_CONN_REQ, sizeof(req), &req);
} else {
__clear_chan_timer(chan);
- __set_chan_timer(chan, HZ / 10);
+ __set_chan_timer(chan, L2CAP_DISC_TIMEOUT);
}
} else if (chan->state == BT_CONNECT2) {
struct l2cap_conn_rsp rsp;
}
} else {
l2cap_state_change(chan, BT_DISCONN);
- __set_chan_timer(chan, HZ / 10);
+ __set_chan_timer(chan, L2CAP_DISC_TIMEOUT);
res = L2CAP_CR_SEC_BLOCK;
stat = L2CAP_CS_NO_INFO;
}
__skb_pull(skb2, offset);
skb_reset_transport_header(skb2);
+ skb_postpull_rcsum(skb2, skb_network_header(skb2),
+ skb_network_header_len(skb2));
icmp6_type = icmp6_hdr(skb2)->icmp6_type;
int err = 0;
struct net_bridge_mdb_htable *mdb;
- spin_lock(&br->multicast_lock);
+ spin_lock_bh(&br->multicast_lock);
if (br->multicast_disabled == !val)
goto unlock;
}
unlock:
- spin_unlock(&br->multicast_lock);
+ spin_unlock_bh(&br->multicast_lock);
return err;
}
ceph_pagelist_init(req->r_trail);
}
/* create request message; allow space for oid */
- msg_size += 40;
+ msg_size += MAX_OBJ_NAME_SIZE;
if (snapc)
msg_size += sizeof(u64) * snapc->num_snaps;
if (use_mempool)
memcpy(top_iph+1, iph+1, top_iph->ihl*4 - sizeof(struct iphdr));
}
- err = ah->nexthdr;
-
kfree(AH_SKB_CB(skb)->tmp);
xfrm_output_resume(skb, err);
}
if (err)
goto out;
+ err = ah->nexthdr;
+
skb->network_header += ah_hlen;
memcpy(skb_network_header(skb), work_iph, ihl);
__skb_pull(skb, ah_hlen + ihl);
skb_set_transport_header(skb, -ihl);
-
- err = ah->nexthdr;
out:
kfree(AH_SKB_CB(skb)->tmp);
xfrm_input_resume(skb, err);
if (err == -EINPROGRESS)
goto out;
- if (err == -EBUSY)
- err = NET_XMIT_DROP;
goto out_free;
}
&np->rcv_saddr);
ipv6_addr_copy((struct in6_addr *)r->id.idiag_dst,
&np->daddr);
- if (ext & (1 << (INET_DIAG_TOS - 1)))
- RTA_PUT_U8(skb, INET_DIAG_TOS, np->tclass);
+ if (ext & (1 << (INET_DIAG_TCLASS - 1)))
+ RTA_PUT_U8(skb, INET_DIAG_TCLASS, np->tclass);
}
#endif
}
if (srrptr <= srrspace) {
opt->srr_is_hit = 1;
+ iph->daddr = nexthop;
opt->is_changed = 1;
}
return 0;
sk = ping_v4_lookup(net, iph->daddr, iph->saddr,
ntohs(icmph->un.echo.id), skb->dev->ifindex);
if (sk == NULL) {
- ICMP_INC_STATS_BH(net, ICMP_MIB_INERRORS);
pr_debug("no socket, dropping\n");
return; /* No socket for error */
}
pr_debug("ping_queue_rcv_skb(sk=%p,sk->num=%d,skb=%p)\n",
inet_sk(sk), inet_sk(sk)->inet_num, skb);
if (sock_queue_rcv_skb(sk, skb) < 0) {
- ICMP_INC_STATS_BH(sock_net(sk), ICMP_MIB_INERRORS);
kfree_skb(skb);
pr_debug("ping_queue_rcv_skb -> failed\n");
return -1;
spin_unlock_bh(rt_hash_lock_addr(hash));
}
+static int check_peer_redir(struct dst_entry *dst, struct inet_peer *peer)
+{
+ struct rtable *rt = (struct rtable *) dst;
+ __be32 orig_gw = rt->rt_gateway;
+ struct neighbour *n, *old_n;
+
+ dst_confirm(&rt->dst);
+
+ rt->rt_gateway = peer->redirect_learned.a4;
+
+ n = ipv4_neigh_lookup(&rt->dst, &rt->rt_gateway);
+ if (IS_ERR(n))
+ return PTR_ERR(n);
+ old_n = xchg(&rt->dst._neighbour, n);
+ if (old_n)
+ neigh_release(old_n);
+ if (!n || !(n->nud_state & NUD_VALID)) {
+ if (n)
+ neigh_event_send(n, NULL);
+ rt->rt_gateway = orig_gw;
+ return -EAGAIN;
+ } else {
+ rt->rt_flags |= RTCF_REDIRECTED;
+ call_netevent_notifiers(NETEVENT_NEIGH_UPDATE, n);
+ }
+ return 0;
+}
+
/* called in rcu_read_lock() section */
void ip_rt_redirect(__be32 old_gw, __be32 daddr, __be32 new_gw,
__be32 saddr, struct net_device *dev)
{
int s, i;
struct in_device *in_dev = __in_dev_get_rcu(dev);
- struct rtable *rt;
__be32 skeys[2] = { saddr, 0 };
int ikeys[2] = { dev->ifindex, 0 };
- struct flowi4 fl4;
struct inet_peer *peer;
struct net *net;
goto reject_redirect;
}
- memset(&fl4, 0, sizeof(fl4));
- fl4.daddr = daddr;
for (s = 0; s < 2; s++) {
for (i = 0; i < 2; i++) {
- fl4.flowi4_oif = ikeys[i];
- fl4.saddr = skeys[s];
- rt = __ip_route_output_key(net, &fl4);
- if (IS_ERR(rt))
- continue;
-
- if (rt->dst.error || rt->dst.dev != dev ||
- rt->rt_gateway != old_gw) {
- ip_rt_put(rt);
- continue;
- }
+ unsigned int hash;
+ struct rtable __rcu **rthp;
+ struct rtable *rt;
+
+ hash = rt_hash(daddr, skeys[s], ikeys[i], rt_genid(net));
+
+ rthp = &rt_hash_table[hash].chain;
+
+ while ((rt = rcu_dereference(*rthp)) != NULL) {
+ rthp = &rt->dst.rt_next;
+
+ if (rt->rt_key_dst != daddr ||
+ rt->rt_key_src != skeys[s] ||
+ rt->rt_oif != ikeys[i] ||
+ rt_is_input_route(rt) ||
+ rt_is_expired(rt) ||
+ !net_eq(dev_net(rt->dst.dev), net) ||
+ rt->dst.error ||
+ rt->dst.dev != dev ||
+ rt->rt_gateway != old_gw)
+ continue;
- if (!rt->peer)
- rt_bind_peer(rt, rt->rt_dst, 1);
+ if (!rt->peer)
+ rt_bind_peer(rt, rt->rt_dst, 1);
- peer = rt->peer;
- if (peer) {
- peer->redirect_learned.a4 = new_gw;
- atomic_inc(&__rt_peer_genid);
+ peer = rt->peer;
+ if (peer) {
+ if (peer->redirect_learned.a4 != new_gw) {
+ peer->redirect_learned.a4 = new_gw;
+ atomic_inc(&__rt_peer_genid);
+ }
+ check_peer_redir(&rt->dst, peer);
+ }
}
-
- ip_rt_put(rt);
- return;
}
}
return;
}
}
-static int check_peer_redir(struct dst_entry *dst, struct inet_peer *peer)
-{
- struct rtable *rt = (struct rtable *) dst;
- __be32 orig_gw = rt->rt_gateway;
- struct neighbour *n, *old_n;
-
- dst_confirm(&rt->dst);
-
- rt->rt_gateway = peer->redirect_learned.a4;
-
- n = ipv4_neigh_lookup(&rt->dst, &rt->rt_gateway);
- if (IS_ERR(n))
- return PTR_ERR(n);
- old_n = xchg(&rt->dst._neighbour, n);
- if (old_n)
- neigh_release(old_n);
- if (!n || !(n->nud_state & NUD_VALID)) {
- if (n)
- neigh_event_send(n, NULL);
- rt->rt_gateway = orig_gw;
- return -EAGAIN;
- } else {
- rt->rt_flags |= RTCF_REDIRECTED;
- call_netevent_notifiers(NETEVENT_NEIGH_UPDATE, n);
- }
- return 0;
-}
static struct dst_entry *ipv4_dst_check(struct dst_entry *dst, u32 cookie)
{
struct rtable *rt = skb_rtable(skb);
struct rtmsg *r;
struct nlmsghdr *nlh;
- long expires = 0;
+ unsigned long expires = 0;
const struct inet_peer *peer = rt->peer;
u32 id = 0, ts = 0, tsage = 0, error;
tsage = get_seconds() - peer->tcp_ts_stamp;
}
expires = ACCESS_ONCE(peer->pmtu_expires);
- if (expires)
- expires -= jiffies;
+ if (expires) {
+ if (time_before(jiffies, expires))
+ expires -= jiffies;
+ else
+ expires = 0;
+ }
}
if (rt_is_input_route(rt)) {
NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_LISTENDROPS);
return NULL;
put_and_exit:
+ tcp_clear_xmit_timers(newsk);
bh_unlock_sock(newsk);
sock_put(newsk);
goto exit;
/* Return 0, if packet can be sent now without violation Nagle's rules:
* 1. It is full sized.
* 2. Or it contains FIN. (already checked by caller)
- * 3. Or TCP_NODELAY was set.
+ * 3. Or TCP_CORK is not set, and TCP_NODELAY is set.
* 4. Or TCP_CORK is not set, and all sent packets are ACKed.
* With Minshall's modification: all sent small packets are ACKed.
*/
#endif
}
- err = ah->nexthdr;
-
kfree(AH_SKB_CB(skb)->tmp);
xfrm_output_resume(skb, err);
}
if (err)
goto out;
+ err = ah->nexthdr;
+
skb->network_header += ah_hlen;
memcpy(skb_network_header(skb), work_iph, hdr_len);
__skb_pull(skb, ah_hlen + hdr_len);
skb_set_transport_header(skb, -hdr_len);
-
- err = ah->nexthdr;
out:
kfree(AH_SKB_CB(skb)->tmp);
xfrm_input_resume(skb, err);
if (err == -EINPROGRESS)
goto out;
- if (err == -EBUSY)
- err = NET_XMIT_DROP;
goto out_free;
}
ipv6_addr_loopback(&hdr->daddr))
goto err;
+ /*
+ * RFC4291 2.7
+ * Multicast addresses must not be used as source addresses in IPv6
+ * packets or appear in any Routing header.
+ */
+ if (ipv6_addr_is_multicast(&hdr->saddr))
+ goto err;
+
skb->transport_header = skb->network_header + sizeof(*hdr);
IP6CB(skb)->nhoff = offsetof(struct ipv6hdr, nexthdr);
if ((err = register_netdevice(dev)) < 0)
goto failed_free;
+ strcpy(t->parms.name, dev->name);
+
dev_hold(dev);
ip6_tnl_link(ip6n, t);
return t;
struct ip6_tnl *t = netdev_priv(dev);
t->dev = dev;
- strcpy(t->parms.name, dev->name);
dev->tstats = alloc_percpu(struct pcpu_tstats);
if (!dev->tstats)
return -ENOMEM;
static int __net_init ip6_tnl_init_net(struct net *net)
{
struct ip6_tnl_net *ip6n = net_generic(net, ip6_tnl_net_id);
+ struct ip6_tnl *t = NULL;
int err;
ip6n->tnls[0] = ip6n->tnls_wc;
err = register_netdev(ip6n->fb_tnl_dev);
if (err < 0)
goto err_register;
+
+ t = netdev_priv(ip6n->fb_tnl_dev);
+
+ strcpy(t->parms.name, ip6n->fb_tnl_dev->name);
return 0;
err_register:
goto error;
}
- /* Point to L2TP header */
- optr = ptr = skb->data;
-
/* Trace packet contents, if enabled */
if (tunnel->debug & L2TP_MSG_DATA) {
length = min(32u, skb->len);
offset = 0;
do {
- printk(" %02X", ptr[offset]);
+ printk(" %02X", skb->data[offset]);
} while (++offset < length);
printk("\n");
}
+ /* Point to L2TP header */
+ optr = ptr = skb->data;
+
/* Get L2TP header flags */
hdrflags = ntohs(*(__be16 *) ptr);
int i, j, err;
bool have_higher_than_11mbit = false;
u16 ap_ht_cap_flags;
+ int min_rate = INT_MAX, min_rate_index = -1;
/* AssocResp and ReassocResp have identical structure */
rates |= BIT(j);
if (is_basic)
basic_rates |= BIT(j);
+ if (rate < min_rate) {
+ min_rate = rate;
+ min_rate_index = j;
+ }
break;
}
}
rates |= BIT(j);
if (is_basic)
basic_rates |= BIT(j);
+ if (rate < min_rate) {
+ min_rate = rate;
+ min_rate_index = j;
+ }
break;
}
}
}
+ /*
+ * some buggy APs don't advertise basic_rates. use the lowest
+ * supported rate instead.
+ */
+ if (unlikely(!basic_rates) && min_rate_index >= 0) {
+ printk(KERN_DEBUG "%s: No basic rates in AssocResp. "
+ "Using min supported rate instead.\n", sdata->name);
+ basic_rates = BIT(min_rate_index);
+ }
+
sta->sta.supp_rates[wk->chan->band] = rates;
sdata->vif.bss_conf.basic_rates = basic_rates;
cancel_work_sync(&ifmgd->request_smps_work);
+ cancel_work_sync(&ifmgd->monitor_work);
cancel_work_sync(&ifmgd->beacon_connection_loss_work);
if (del_timer_sync(&ifmgd->timer))
set_bit(TMR_RUNNING_TIMER, &ifmgd->timers_running);
if (del_timer_sync(&ifmgd->chswitch_timer))
set_bit(TMR_RUNNING_CHANSW, &ifmgd->timers_running);
- cancel_work_sync(&ifmgd->monitor_work);
/* these will just be re-established on connection */
del_timer_sync(&ifmgd->conn_mon_timer);
del_timer_sync(&ifmgd->bcn_mon_timer);
pos++;
/* IEEE80211_RADIOTAP_RATE */
- if (status->flag & RX_FLAG_HT) {
+ if (!rate || status->flag & RX_FLAG_HT) {
/*
+ * Without rate information don't add it. If we have,
* MCS information is a separate field in radiotap,
* added below. The byte here is needed as padding
* for the channel though, so initialise it to 0.
else if (status->flag & RX_FLAG_HT)
put_unaligned_le16(IEEE80211_CHAN_DYN | IEEE80211_CHAN_2GHZ,
pos);
- else if (rate->flags & IEEE80211_RATE_ERP_G)
+ else if (rate && rate->flags & IEEE80211_RATE_ERP_G)
put_unaligned_le16(IEEE80211_CHAN_OFDM | IEEE80211_CHAN_2GHZ,
pos);
- else
+ else if (rate)
put_unaligned_le16(IEEE80211_CHAN_CCK | IEEE80211_CHAN_2GHZ,
pos);
+ else
+ put_unaligned_le16(IEEE80211_CHAN_2GHZ, pos);
pos += 2;
/* IEEE80211_RADIOTAP_DBM_ANTSIGNAL */
* Use MoreData flag to indicate whether there are
* more buffered frames for this STA
*/
- if (!more_data)
- hdr->frame_control &=
- cpu_to_le16(~IEEE80211_FCTL_MOREDATA);
- else
+ if (more_data || !skb_queue_empty(&frames))
hdr->frame_control |=
cpu_to_le16(IEEE80211_FCTL_MOREDATA);
+ else
+ hdr->frame_control &=
+ cpu_to_le16(~IEEE80211_FCTL_MOREDATA);
if (ieee80211_is_data_qos(hdr->frame_control) ||
ieee80211_is_qos_nullfunc(hdr->frame_control))
skb = ieee80211_probereq_get(&local->hw, &sdata->vif,
ssid, ssid_len,
buf, buf_len);
+ if (!skb)
+ goto out;
if (dst) {
mgmt = (struct ieee80211_mgmt *) skb->data;
}
IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
+
+ out:
kfree(buf);
return skb;
config RDS_RDMA
tristate "RDS over Infiniband and iWARP"
- select LLIST
depends on RDS && INFINIBAND && INFINIBAND_ADDR_TRANS
---help---
Allow RDS to use Infiniband and iWARP as a transport.
[NL80211_ATTR_MESH_CONFIG] = { .type = NLA_NESTED },
[NL80211_ATTR_SUPPORT_MESH_AUTH] = { .type = NLA_FLAG },
- [NL80211_ATTR_HT_CAPABILITY] = { .type = NLA_BINARY,
- .len = NL80211_HT_CAPABILITY_LEN },
+ [NL80211_ATTR_HT_CAPABILITY] = { .len = NL80211_HT_CAPABILITY_LEN },
[NL80211_ATTR_MGMT_SUBTYPE] = { .type = NLA_U8 },
[NL80211_ATTR_IE] = { .type = NLA_BINARY,
goto bad_res;
}
+ if (netdev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP &&
+ netdev->ieee80211_ptr->iftype != NL80211_IFTYPE_P2P_GO) {
+ result = -EINVAL;
+ goto bad_res;
+ }
+
nla_for_each_nested(nl_txq_params,
info->attrs[NL80211_ATTR_WIPHY_TXQ_PARAMS],
rem_txq_params) {
kfree(last_request);
+ last_request = NULL;
+ dev_set_uevent_suppress(®_pdev->dev, true);
+
platform_device_unregister(reg_pdev);
spin_lock_bh(®_pending_beacons_lock);
{
const u8 *ie1 = cfg80211_find_ie(num, ies1, len1);
const u8 *ie2 = cfg80211_find_ie(num, ies2, len2);
- int r;
+ /* equal if both missing */
if (!ie1 && !ie2)
return 0;
- if (!ie1 || !ie2)
+ /* sort missing IE before (left of) present IE */
+ if (!ie1)
return -1;
+ if (!ie2)
+ return 1;
- r = memcmp(ie1 + 2, ie2 + 2, min(ie1[1], ie2[1]));
- if (r == 0 && ie1[1] != ie2[1])
+ /* sort by length first, then by contents */
+ if (ie1[1] != ie2[1])
return ie2[1] - ie1[1];
- return r;
+ return memcmp(ie1 + 2, ie2 + 2, ie1[1]);
}
static bool is_bss(struct cfg80211_bss *a,
# Makefile for encrypted keys
#
-obj-$(CONFIG_ENCRYPTED_KEYS) += encrypted.o ecryptfs_format.o
-obj-$(CONFIG_TRUSTED_KEYS) += masterkey_trusted.o
+obj-$(CONFIG_ENCRYPTED_KEYS) += encrypted-keys.o
+
+encrypted-keys-y := encrypted.o ecryptfs_format.o
+masterkey-$(CONFIG_TRUSTED_KEYS) := masterkey_trusted.o
+masterkey-$(CONFIG_TRUSTED_KEYS)-$(CONFIG_ENCRYPTED_KEYS) := masterkey_trusted.o
+encrypted-keys-y += $(masterkey-y) $(masterkey-m-m)
goto out;
if (IS_ERR(mkey)) {
- int ret = PTR_ERR(epayload);
+ int ret = PTR_ERR(mkey);
if (ret == -ENOTSUPP)
pr_info("encrypted_key: key %s not supported",
#define __ENCRYPTED_KEY_H
#define ENCRYPTED_DEBUG 0
-#ifdef CONFIG_TRUSTED_KEYS
+#if defined(CONFIG_TRUSTED_KEYS) || \
+ (defined(CONFIG_TRUSTED_KEYS_MODULE) && defined(CONFIG_ENCRYPTED_KEYS_MODULE))
extern struct key *request_trusted_key(const char *trusted_desc,
u8 **master_key, size_t *master_keylen);
#else
key->expiry = 0;
}
- kfree_rcu(zap, rcu);
+ if (zap)
+ kfree_rcu(zap, rcu);
error:
return ret;
const char *smack_cipso_option = SMACK_CIPSO_OPTION;
-
-#define SEQ_READ_FINISHED ((loff_t)-1)
-
/*
* Values for parsing cipso rules
* SMK_DIGITLEN: Length of a digit field in a rule.
rc = count;
/*
+ * If this is "load" as opposed to "load-self" and a new rule
+ * it needs to get added for reporting.
* smk_set_access returns true if there was already a rule
* for the subject/object pair, and false if it was new.
*/
- if (!smk_set_access(rule, rule_list, rule_lock)) {
+ if (load && !smk_set_access(rule, rule_list, rule_lock)) {
smlp = kzalloc(sizeof(*smlp), GFP_KERNEL);
if (smlp != NULL) {
smlp->smk_rule = rule;
return rc;
}
-
/*
- * Seq_file read operations for /smack/load
+ * Core logic for smackfs seq list operations.
*/
-static void *load_seq_start(struct seq_file *s, loff_t *pos)
+static void *smk_seq_start(struct seq_file *s, loff_t *pos,
+ struct list_head *head)
{
struct list_head *list;
* This is 0 the first time through.
*/
if (s->index == 0)
- s->private = &smack_rule_list;
+ s->private = head;
if (s->private == NULL)
return NULL;
return list;
}
-static void *load_seq_next(struct seq_file *s, void *v, loff_t *pos)
+static void *smk_seq_next(struct seq_file *s, void *v, loff_t *pos,
+ struct list_head *head)
{
struct list_head *list = v;
- if (list_is_last(list, &smack_rule_list)) {
+ if (list_is_last(list, head)) {
s->private = NULL;
return NULL;
}
return list->next;
}
+static void smk_seq_stop(struct seq_file *s, void *v)
+{
+ /* No-op */
+}
+
+/*
+ * Seq_file read operations for /smack/load
+ */
+
+static void *load_seq_start(struct seq_file *s, loff_t *pos)
+{
+ return smk_seq_start(s, pos, &smack_rule_list);
+}
+
+static void *load_seq_next(struct seq_file *s, void *v, loff_t *pos)
+{
+ return smk_seq_next(s, v, pos, &smack_rule_list);
+}
+
static int load_seq_show(struct seq_file *s, void *v)
{
struct list_head *list = v;
return 0;
}
-static void load_seq_stop(struct seq_file *s, void *v)
-{
- /* No-op */
-}
-
static const struct seq_operations load_seq_ops = {
.start = load_seq_start,
.next = load_seq_next,
.show = load_seq_show,
- .stop = load_seq_stop,
+ .stop = smk_seq_stop,
};
/**
static void *cipso_seq_start(struct seq_file *s, loff_t *pos)
{
- if (*pos == SEQ_READ_FINISHED)
- return NULL;
- if (list_empty(&smack_known_list))
- return NULL;
-
- return smack_known_list.next;
+ return smk_seq_start(s, pos, &smack_known_list);
}
static void *cipso_seq_next(struct seq_file *s, void *v, loff_t *pos)
{
- struct list_head *list = v;
-
- /*
- * labels with no associated cipso value wont be printed
- * in cipso_seq_show
- */
- if (list_is_last(list, &smack_known_list)) {
- *pos = SEQ_READ_FINISHED;
- return NULL;
- }
-
- return list->next;
+ return smk_seq_next(s, v, pos, &smack_known_list);
}
/*
return 0;
}
-static void cipso_seq_stop(struct seq_file *s, void *v)
-{
- /* No-op */
-}
-
static const struct seq_operations cipso_seq_ops = {
.start = cipso_seq_start,
- .stop = cipso_seq_stop,
.next = cipso_seq_next,
.show = cipso_seq_show,
+ .stop = smk_seq_stop,
};
/**
static void *netlbladdr_seq_start(struct seq_file *s, loff_t *pos)
{
- if (*pos == SEQ_READ_FINISHED)
- return NULL;
- if (list_empty(&smk_netlbladdr_list))
- return NULL;
- return smk_netlbladdr_list.next;
+ return smk_seq_start(s, pos, &smk_netlbladdr_list);
}
static void *netlbladdr_seq_next(struct seq_file *s, void *v, loff_t *pos)
{
- struct list_head *list = v;
-
- if (list_is_last(list, &smk_netlbladdr_list)) {
- *pos = SEQ_READ_FINISHED;
- return NULL;
- }
-
- return list->next;
+ return smk_seq_next(s, v, pos, &smk_netlbladdr_list);
}
#define BEBITS (sizeof(__be32) * 8)
return 0;
}
-static void netlbladdr_seq_stop(struct seq_file *s, void *v)
-{
- /* No-op */
-}
-
static const struct seq_operations netlbladdr_seq_ops = {
.start = netlbladdr_seq_start,
- .stop = netlbladdr_seq_stop,
.next = netlbladdr_seq_next,
.show = netlbladdr_seq_show,
+ .stop = smk_seq_stop,
};
/**
{
struct task_smack *tsp = current_security();
- if (*pos == SEQ_READ_FINISHED)
- return NULL;
- if (list_empty(&tsp->smk_rules))
- return NULL;
- return tsp->smk_rules.next;
+ return smk_seq_start(s, pos, &tsp->smk_rules);
}
static void *load_self_seq_next(struct seq_file *s, void *v, loff_t *pos)
{
struct task_smack *tsp = current_security();
- struct list_head *list = v;
- if (list_is_last(list, &tsp->smk_rules)) {
- *pos = SEQ_READ_FINISHED;
- return NULL;
- }
- return list->next;
+ return smk_seq_next(s, v, pos, &tsp->smk_rules);
}
static int load_self_seq_show(struct seq_file *s, void *v)
return 0;
}
-static void load_self_seq_stop(struct seq_file *s, void *v)
-{
- /* No-op */
-}
-
static const struct seq_operations load_self_seq_ops = {
.start = load_self_seq_start,
.next = load_self_seq_next,
.show = load_self_seq_show,
- .stop = load_self_seq_stop,
+ .stop = smk_seq_stop,
};
struct link_ctl_info info;
int vals[2]; /* current values */
unsigned int flags;
+ struct snd_kcontrol *kctl; /* original kcontrol pointer */
struct snd_kcontrol slave; /* the copy of original control entry */
};
slave->count * sizeof(*slave->vd), GFP_KERNEL);
if (!srec)
return -ENOMEM;
+ srec->kctl = slave;
srec->slave = *slave;
memcpy(srec->slave.vd, slave->vd, slave->count * sizeof(*slave->vd));
srec->master = master_link;
static void master_free(struct snd_kcontrol *kcontrol)
{
struct link_master *master = snd_kcontrol_chip(kcontrol);
- struct link_slave *slave;
-
- list_for_each_entry(slave, &master->slaves, list)
- slave->master = NULL;
+ struct link_slave *slave, *n;
+
+ /* free all slave links and retore the original slave kctls */
+ list_for_each_entry_safe(slave, n, &master->slaves, list) {
+ struct snd_kcontrol *sctl = slave->kctl;
+ struct list_head olist = sctl->list;
+ memcpy(sctl, &slave->slave, sizeof(*sctl));
+ memcpy(sctl->vd, slave->slave.vd,
+ sctl->count * sizeof(*sctl->vd));
+ sctl->list = olist; /* keep the current linked-list */
+ kfree(slave);
+ }
kfree(master);
}
return 0;
}
+typedef int (*map_slave_func_t)(void *, struct snd_kcontrol *);
+
+/* apply the function to all matching slave ctls in the mixer list */
+static int map_slaves(struct hda_codec *codec, const char * const *slaves,
+ map_slave_func_t func, void *data)
+{
+ struct hda_nid_item *items;
+ const char * const *s;
+ int i, err;
+
+ items = codec->mixers.list;
+ for (i = 0; i < codec->mixers.used; i++) {
+ struct snd_kcontrol *sctl = items[i].kctl;
+ if (!sctl || !sctl->id.name ||
+ sctl->id.iface != SNDRV_CTL_ELEM_IFACE_MIXER)
+ continue;
+ for (s = slaves; *s; s++) {
+ if (!strcmp(sctl->id.name, *s)) {
+ err = func(data, sctl);
+ if (err)
+ return err;
+ break;
+ }
+ }
+ }
+ return 0;
+}
+
+static int check_slave_present(void *data, struct snd_kcontrol *sctl)
+{
+ return 1;
+}
+
/**
* snd_hda_add_vmaster - create a virtual master control and add slaves
* @codec: HD-audio codec
unsigned int *tlv, const char * const *slaves)
{
struct snd_kcontrol *kctl;
- const char * const *s;
int err;
- for (s = slaves; *s && !snd_hda_find_mixer_ctl(codec, *s); s++)
- ;
- if (!*s) {
+ err = map_slaves(codec, slaves, check_slave_present, NULL);
+ if (err != 1) {
snd_printdd("No slave found for %s\n", name);
return 0;
}
if (err < 0)
return err;
- for (s = slaves; *s; s++) {
- struct snd_kcontrol *sctl;
- int i = 0;
- for (;;) {
- sctl = _snd_hda_find_mixer_ctl(codec, *s, i);
- if (!sctl) {
- if (!i)
- snd_printdd("Cannot find slave %s, "
- "skipped\n", *s);
- break;
- }
- err = snd_ctl_add_slave(kctl, sctl);
- if (err < 0)
- return err;
- i++;
- }
- }
+ err = map_slaves(codec, slaves, (map_slave_func_t)snd_ctl_add_slave,
+ kctl);
+ if (err < 0)
+ return err;
return 0;
}
EXPORT_SYMBOL_HDA(snd_hda_add_vmaster);
memset(sequences_hp, 0, sizeof(sequences_hp));
assoc_line_out = 0;
+ codec->ignore_misc_bit = true;
end_nid = codec->start_nid + codec->num_nodes;
for (nid = codec->start_nid; nid < end_nid; nid++) {
unsigned int wid_caps = get_wcaps(codec, nid);
continue;
def_conf = snd_hda_codec_get_pincfg(codec, nid);
+ if (!(get_defcfg_misc(snd_hda_codec_get_pincfg(codec, nid)) &
+ AC_DEFCFG_MISC_NO_PRESENCE))
+ codec->ignore_misc_bit = false;
conn = get_defcfg_connect(def_conf);
if (conn == AC_JACK_PORT_NONE)
continue;
unsigned int no_sticky_stream:1; /* no sticky-PCM stream assignment */
unsigned int pins_shutup:1; /* pins are shut up */
unsigned int no_trigger_sense:1; /* don't trigger at pin-sensing */
+ unsigned int ignore_misc_bit:1; /* ignore MISC_NO_PRESENCE bit */
#ifdef CONFIG_SND_HDA_POWER_SAVE
unsigned int power_on :1; /* current (global) power-state */
unsigned int power_transition :1; /* power-state in transition */
buf + ELD_FIXED_BYTES + mnl + 3 * i);
}
+ /*
+ * HDMI sink's ELD info cannot always be retrieved for now, e.g.
+ * in console or for audio devices. Assume the highest speakers
+ * configuration, to _not_ prohibit multi-channel audio playback.
+ */
+ if (!e->spk_alloc)
+ e->spk_alloc = 0xffff;
+
+ e->eld_valid = true;
return 0;
out_fail:
- e->eld_ver = 0;
return -EINVAL;
}
* ELD is valid, actual eld_size is assigned in hdmi_update_eld()
*/
- if (!eld->eld_valid)
- return -ENOENT;
-
size = snd_hdmi_get_eld_size(codec, nid);
if (size == 0) {
/* wfg: workaround for ASUS P5E-VM HDMI board */
static inline bool is_jack_detectable(struct hda_codec *codec, hda_nid_t nid)
{
- return (snd_hda_query_pin_caps(codec, nid) & AC_PINCAP_PRES_DETECT) &&
- /* disable MISC_NO_PRESENCE check because it may break too
- * many devices
- */
- /*(get_defcfg_misc(snd_hda_codec_get_pincfg(codec, nid) &
- AC_DEFCFG_MISC_NO_PRESENCE)) &&*/
- (get_wcaps(codec, nid) & AC_WCAP_UNSOL_CAP);
+ if (!(snd_hda_query_pin_caps(codec, nid) & AC_PINCAP_PRES_DETECT))
+ return false;
+ if (!codec->ignore_misc_bit &&
+ (get_defcfg_misc(snd_hda_codec_get_pincfg(codec, nid)) &
+ AC_DEFCFG_MISC_NO_PRESENCE))
+ return false;
+ if (!(get_wcaps(codec, nid) & AC_WCAP_UNSOL_CAP))
+ return false;
+ return true;
}
/* flags for hda_nid_item */
int spk_alloc;
int sad_count;
struct cea_sad sad[ELD_MAX_SAD];
+ /*
+ * all fields above eld_buffer will be cleared before updating ELD
+ */
char eld_buffer[ELD_MAX_SIZE];
#ifdef CONFIG_PROC_FS
struct snd_info_entry *proc_entry;
return snd_hda_multi_out_dig_cleanup(codec, &spec->multiout);
}
+static void cs_update_input_select(struct hda_codec *codec)
+{
+ struct cs_spec *spec = codec->spec;
+ if (spec->cur_adc)
+ snd_hda_codec_write(codec, spec->cur_adc, 0,
+ AC_VERB_SET_CONNECT_SEL,
+ spec->adc_idx[spec->cur_input]);
+}
+
/*
* Analog capture
*/
spec->cur_adc = spec->adc_nid[spec->cur_input];
spec->cur_adc_stream_tag = stream_tag;
spec->cur_adc_format = format;
+ cs_update_input_select(codec);
snd_hda_codec_setup_stream(codec, spec->cur_adc, stream_tag, 0, format);
return 0;
}
spec->cur_adc_stream_tag, 0,
spec->cur_adc_format);
}
- snd_hda_codec_write(codec, spec->cur_adc, 0,
- AC_VERB_SET_CONNECT_SEL,
- spec->adc_idx[idx]);
spec->cur_input = idx;
+ cs_update_input_select(codec);
return 1;
}
} else {
spec->cur_input = spec->last_input;
}
-
- snd_hda_codec_write_cache(codec, spec->cur_adc, 0,
- AC_VERB_SET_CONNECT_SEL,
- spec->adc_idx[spec->cur_input]);
+ cs_update_input_select(codec);
} else {
if (present)
change_cur_input(codec, spec->automic_idx, 0);
cs_automic(codec);
else {
spec->cur_adc = spec->adc_nid[spec->cur_input];
- snd_hda_codec_write(codec, spec->cur_adc, 0,
- AC_VERB_SET_CONNECT_SEL,
- spec->adc_idx[spec->cur_input]);
+ cs_update_input_select(codec);
}
} else {
change_cur_input(codec, spec->cur_input, 1);
SND_PCI_QUIRK(0x1043, 0x1993, "Asus U50F", CXT5066_ASUS),
SND_PCI_QUIRK(0x1179, 0xff1e, "Toshiba Satellite C650D", CXT5066_IDEAPAD),
SND_PCI_QUIRK(0x1179, 0xff50, "Toshiba Satellite P500-PSPGSC-01800T", CXT5066_OLPC_XO_1_5),
- SND_PCI_QUIRK(0x1179, 0xffe0, "Toshiba Satellite Pro T130-15F", CXT5066_OLPC_XO_1_5),
SND_PCI_QUIRK(0x14f1, 0x0101, "Conexant Reference board",
CXT5066_LAPTOP),
SND_PCI_QUIRK(0x152d, 0x0833, "OLPC XO-1.5", CXT5066_OLPC_XO_1_5),
hda_nid_t pin_nid;
int num_mux_nids;
hda_nid_t mux_nids[HDA_MAX_CONNECTIONS];
+
+ struct hda_codec *codec;
struct hdmi_eld sink_eld;
+ struct delayed_work work;
};
struct hdmi_spec {
* Unsolicited events
*/
-static void hdmi_present_sense(struct hda_codec *codec, hda_nid_t pin_nid,
- struct hdmi_eld *eld);
+static void hdmi_present_sense(struct hdmi_spec_per_pin *per_pin, bool retry);
static void hdmi_intrinsic_event(struct hda_codec *codec, unsigned int res)
{
int pd = !!(res & AC_UNSOL_RES_PD);
int eldv = !!(res & AC_UNSOL_RES_ELDV);
int pin_idx;
- struct hdmi_eld *eld;
printk(KERN_INFO
"HDMI hot plug event: Codec=%d Pin=%d Presence_Detect=%d ELD_Valid=%d\n",
pin_idx = pin_nid_to_pin_index(spec, pin_nid);
if (pin_idx < 0)
return;
- eld = &spec->pins[pin_idx].sink_eld;
-
- hdmi_present_sense(codec, pin_nid, eld);
- /*
- * HDMI sink's ELD info cannot always be retrieved for now, e.g.
- * in console or for audio devices. Assume the highest speakers
- * configuration, to _not_ prohibit multi-channel audio playback.
- */
- if (!eld->spk_alloc)
- eld->spk_alloc = 0xffff;
+ hdmi_present_sense(&spec->pins[pin_idx], true);
}
static void hdmi_non_intrinsic_event(struct hda_codec *codec, unsigned int res)
return 0;
}
-static void hdmi_present_sense(struct hda_codec *codec, hda_nid_t pin_nid,
- struct hdmi_eld *eld)
+static void hdmi_present_sense(struct hdmi_spec_per_pin *per_pin, bool retry)
{
+ struct hda_codec *codec = per_pin->codec;
+ struct hdmi_eld *eld = &per_pin->sink_eld;
+ hda_nid_t pin_nid = per_pin->pin_nid;
/*
* Always execute a GetPinSense verb here, even when called from
* hdmi_intrinsic_event; for some NVIDIA HW, the unsolicited
* the unsolicited response to avoid custom WARs.
*/
int present = snd_hda_pin_sense(codec, pin_nid);
+ bool eld_valid = false;
- memset(eld, 0, sizeof(*eld));
+ memset(eld, 0, offsetof(struct hdmi_eld, eld_buffer));
eld->monitor_present = !!(present & AC_PINSENSE_PRESENCE);
if (eld->monitor_present)
- eld->eld_valid = !!(present & AC_PINSENSE_ELDV);
- else
- eld->eld_valid = 0;
+ eld_valid = !!(present & AC_PINSENSE_ELDV);
printk(KERN_INFO
"HDMI status: Codec=%d Pin=%d Presence_Detect=%d ELD_Valid=%d\n",
- codec->addr, pin_nid, eld->monitor_present, eld->eld_valid);
+ codec->addr, pin_nid, eld->monitor_present, eld_valid);
- if (eld->eld_valid)
+ if (eld_valid) {
if (!snd_hdmi_get_eld(eld, codec, pin_nid))
snd_hdmi_show_eld(eld);
+ else if (retry) {
+ queue_delayed_work(codec->bus->workq,
+ &per_pin->work,
+ msecs_to_jiffies(300));
+ }
+ }
snd_hda_input_jack_report(codec, pin_nid);
}
+static void hdmi_repoll_eld(struct work_struct *work)
+{
+ struct hdmi_spec_per_pin *per_pin =
+ container_of(to_delayed_work(work), struct hdmi_spec_per_pin, work);
+
+ hdmi_present_sense(per_pin, false);
+}
+
static int hdmi_add_pin(struct hda_codec *codec, hda_nid_t pin_nid)
{
struct hdmi_spec *spec = codec->spec;
if (err < 0)
return err;
- hdmi_present_sense(codec, per_pin->pin_nid, &per_pin->sink_eld);
+ hdmi_present_sense(per_pin, false);
return 0;
}
AC_VERB_SET_UNSOLICITED_ENABLE,
AC_USRSP_EN | pin_nid);
+ per_pin->codec = codec;
+ INIT_DELAYED_WORK(&per_pin->work, hdmi_repoll_eld);
snd_hda_eld_proc_new(codec, eld, pin_idx);
}
return 0;
struct hdmi_spec_per_pin *per_pin = &spec->pins[pin_idx];
struct hdmi_eld *eld = &per_pin->sink_eld;
+ cancel_delayed_work(&per_pin->work);
snd_hda_eld_proc_free(codec, eld);
}
snd_hda_input_jack_free(codec);
+ flush_workqueue(codec->bus->workq);
kfree(spec);
}
struct alc_spec *spec = codec->spec;
const struct hda_input_mux *imux;
unsigned int mux_idx;
- int i, type;
+ int i, type, num_conns;
hda_nid_t nid;
mux_idx = adc_idx >= spec->num_mux_defs ? 0 : adc_idx;
spec->capsrc_nids[adc_idx] : spec->adc_nids[adc_idx];
/* no selection? */
- if (snd_hda_get_conn_list(codec, nid, NULL) <= 1)
+ num_conns = snd_hda_get_conn_list(codec, nid, NULL);
+ if (num_conns <= 1)
return 1;
type = get_wcaps_type(get_wcaps(codec, nid));
if (type == AC_WID_AUD_MIX) {
/* Matrix-mixer style (e.g. ALC882) */
- for (i = 0; i < imux->num_items; i++) {
- unsigned int v = (i == idx) ? 0 : HDA_AMP_MUTE;
- snd_hda_codec_amp_stereo(codec, nid, HDA_INPUT,
- imux->items[i].index,
+ int active = imux->items[idx].index;
+ for (i = 0; i < num_conns; i++) {
+ unsigned int v = (i == active) ? 0 : HDA_AMP_MUTE;
+ snd_hda_codec_amp_stereo(codec, nid, HDA_INPUT, i,
HDA_AMP_MUTE, v);
}
} else {
switch (fix->type) {
case ALC_FIXUP_SKU:
if (action != ALC_FIXUP_ACT_PRE_PROBE || !fix->v.sku)
- break;;
+ break;
snd_printdd(KERN_INFO "hda_codec: %s: "
"Apply sku override for %s\n",
codec->chip_name, modelname);
STAC_92HD83XXX_REF,
STAC_92HD83XXX_PWR_REF,
STAC_DELL_S14,
+ STAC_DELL_VOSTRO_3500,
STAC_92HD83XXX_HP,
STAC_92HD83XXX_HP_cNB11_INTQUAD,
STAC_HP_DV7_4000,
/* power management */
unsigned int num_pwrs;
- const unsigned int *pwr_mapping;
const hda_nid_t *pwr_nids;
const hda_nid_t *dac_list;
#define STAC92HD83_DAC_COUNT 3
-static const hda_nid_t stac92hd83xxx_pwr_nids[4] = {
- 0xa, 0xb, 0xd, 0xe,
+static const hda_nid_t stac92hd83xxx_pwr_nids[7] = {
+ 0x0a, 0x0b, 0x0c, 0xd, 0x0e,
+ 0x0f, 0x10
};
static const hda_nid_t stac92hd83xxx_slave_dig_outs[2] = {
0x1e, 0,
};
-static const unsigned int stac92hd83xxx_pwr_mapping[4] = {
- 0x03, 0x0c, 0x20, 0x40,
-};
-
static const hda_nid_t stac92hd83xxx_dmic_nids[] = {
0x11, 0x20,
};
0x40f000f0, 0x40f000f0,
};
+static const unsigned int dell_vostro_3500_pin_configs[10] = {
+ 0x02a11020, 0x0221101f, 0x400000f0, 0x90170110,
+ 0x400000f1, 0x400000f2, 0x400000f3, 0x90a60160,
+ 0x400000f4, 0x400000f5,
+};
+
static const unsigned int hp_dv7_4000_pin_configs[10] = {
0x03a12050, 0x0321201f, 0x40f000f0, 0x90170110,
0x40f000f0, 0x40f000f0, 0x90170110, 0xd5a30140,
[STAC_92HD83XXX_REF] = ref92hd83xxx_pin_configs,
[STAC_92HD83XXX_PWR_REF] = ref92hd83xxx_pin_configs,
[STAC_DELL_S14] = dell_s14_pin_configs,
+ [STAC_DELL_VOSTRO_3500] = dell_vostro_3500_pin_configs,
[STAC_92HD83XXX_HP_cNB11_INTQUAD] = hp_cNB11_intquad_pin_configs,
[STAC_HP_DV7_4000] = hp_dv7_4000_pin_configs,
};
[STAC_92HD83XXX_REF] = "ref",
[STAC_92HD83XXX_PWR_REF] = "mic-ref",
[STAC_DELL_S14] = "dell-s14",
+ [STAC_DELL_VOSTRO_3500] = "dell-vostro-3500",
[STAC_92HD83XXX_HP] = "hp",
[STAC_92HD83XXX_HP_cNB11_INTQUAD] = "hp_cNB11_intquad",
[STAC_HP_DV7_4000] = "hp-dv7-4000",
"DFI LanParty", STAC_92HD83XXX_REF),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02ba,
"unknown Dell", STAC_DELL_S14),
+ SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x1028,
+ "Dell Vostro 3500", STAC_DELL_VOSTRO_3500),
SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_HP, 0xff00, 0x3600,
"HP", STAC_92HD83XXX_HP),
SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x1656,
stac_toggle_power_map(codec, nid, 1);
continue;
}
- if (enable_pin_detect(codec, nid, STAC_PWR_EVENT))
+ if (enable_pin_detect(codec, nid, STAC_PWR_EVENT)) {
stac_issue_unsol_event(codec, nid);
+ continue;
+ }
+ /* none of the above, turn the port OFF */
+ stac_toggle_power_map(codec, nid, 0);
}
/* sync mute LED */
if (idx >= spec->num_pwrs)
return;
- /* several codecs have two power down bits */
- if (spec->pwr_mapping)
- idx = spec->pwr_mapping[idx];
- else
- idx = 1 << idx;
+ idx = 1 << idx;
val = snd_hda_codec_read(codec, codec->afg, 0, 0x0fec, 0x0) & 0xff;
if (enable)
snd_hda_codec_set_pincfg(codec, 0xf, 0x2181205e);
}
- /* reset pin power-down; Windows may leave these bits after reboot */
- snd_hda_codec_write_cache(codec, codec->afg, 0, 0x7EC, 0);
- snd_hda_codec_write_cache(codec, codec->afg, 0, 0x7ED, 0);
codec->no_trigger_sense = 1;
codec->spec = spec;
codec->slave_dig_outs = stac92hd83xxx_slave_dig_outs;
spec->digbeep_nid = 0x21;
spec->pwr_nids = stac92hd83xxx_pwr_nids;
- spec->pwr_mapping = stac92hd83xxx_pwr_mapping;
spec->num_pwrs = ARRAY_SIZE(stac92hd83xxx_pwr_nids);
spec->multiout.dac_nids = spec->dac_nids;
spec->init = stac92hd83xxx_core_init;
stac92xx_set_config_regs(codec,
stac92hd83xxx_brd_tbl[spec->board_config]);
- if (spec->board_config != STAC_92HD83XXX_PWR_REF)
- spec->num_pwrs = 0;
-
codec->patch_ops = stac92xx_patch_ops;
if (find_mute_led_gpio(codec, 0))
(codec->revision_id & 0xf) == 1)
spec->stream_delay = 40; /* 40 milliseconds */
- /* no output amps */
- spec->num_pwrs = 0;
/* disable VSW */
spec->init = stac92hd71bxx_core_init;
unmute_init++;
if ((codec->revision_id & 0xf) == 1)
spec->stream_delay = 40; /* 40 milliseconds */
- /* no output amps */
- spec->num_pwrs = 0;
/* fallthru */
default:
spec->init = stac92hd71bxx_core_init;
}
if (civ != igetbyte(chip, ichdev->reg_offset + ICH_REG_OFF_CIV))
continue;
+
+ /* IO read operation is very expensive inside virtual machine
+ * as it is emulated. The probability that subsequent PICB read
+ * will return different result is high enough to loop till
+ * timeout here.
+ * Same CIV is strict enough condition to be sure that PICB
+ * is valid inside VM on emulated card. */
if (chip->inside_vm)
break;
if (ptr1 == igetword(chip, ichdev->reg_offset + ichdev->roff_picb))
ICH_PCR, ICH_SCR, ICH_SIS_TCR
};
+static int __devinit snd_intel8x0_inside_vm(struct pci_dev *pci)
+{
+ int result = inside_vm;
+ char *msg = NULL;
+
+ /* check module parameter first (override detection) */
+ if (result >= 0) {
+ msg = result ? "enable (forced) VM" : "disable (forced) VM";
+ goto fini;
+ }
+
+ /* detect KVM and Parallels virtual environments */
+ result = kvm_para_available();
+#ifdef X86_FEATURE_HYPERVISOR
+ result = result || boot_cpu_has(X86_FEATURE_HYPERVISOR);
+#endif
+ if (!result)
+ goto fini;
+
+ /* check for known (emulated) devices */
+ if (pci->subsystem_vendor == 0x1af4 &&
+ pci->subsystem_device == 0x1100) {
+ /* KVM emulated sound, PCI SSID: 1af4:1100 */
+ msg = "enable KVM";
+ } else if (pci->subsystem_vendor == 0x1ab8) {
+ /* Parallels VM emulated sound, PCI SSID: 1ab8:xxxx */
+ msg = "enable Parallels VM";
+ } else {
+ msg = "disable (unknown or VT-d) VM";
+ result = 0;
+ }
+
+fini:
+ if (msg != NULL)
+ printk(KERN_INFO "intel8x0: %s optimization\n", msg);
+
+ return result;
+}
+
static int __devinit snd_intel8x0_create(struct snd_card *card,
struct pci_dev *pci,
unsigned long device_type,
if (xbox)
chip->xbox = 1;
- chip->inside_vm = inside_vm;
- if (inside_vm)
- printk(KERN_INFO "intel8x0: enable KVM optimization\n");
+ chip->inside_vm = snd_intel8x0_inside_vm(pci);
if (pci->vendor == PCI_VENDOR_ID_INTEL &&
pci->device == PCI_DEVICE_ID_INTEL_440MX)
buggy_irq = 0;
}
- if (inside_vm < 0) {
- /* detect KVM and Parallels virtual environments */
- inside_vm = kvm_para_available();
-#if defined(__i386__) || defined(__x86_64__)
- inside_vm = inside_vm || boot_cpu_has(X86_FEATURE_HYPERVISOR);
-#endif
- }
-
if ((err = snd_intel8x0_create(card, pci, pci_id->driver_data,
&chip)) < 0) {
snd_card_free(card);
(0x0fUL << 12) |
(PS3_AUDIO_IOID);
- ret = lv1_gpu_attribute(0x100, 0x007, val, 0, 0);
+ ret = lv1_gpu_attribute(0x100, 0x007, val);
if (ret)
pr_info("%s: gpu_attribute failed %d\n", __func__,
ret);
static int wm8994_readable(struct snd_soc_codec *codec, unsigned int reg)
{
struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec);
- struct wm8994 *control = wm8994->control_data;
+ struct wm8994 *control = codec->control_data;
switch (reg) {
case WM8994_GPIO_1:
{
struct wm8994_priv *wm8994 = data;
struct snd_soc_codec *codec = wm8994->codec;
- int reg;
+ int reg, count;
- reg = snd_soc_read(codec, WM8958_MIC_DETECT_3);
- if (reg < 0) {
- dev_err(codec->dev, "Failed to read mic detect status: %d\n",
- reg);
- return IRQ_NONE;
- }
+ /* We may occasionally read a detection without an impedence
+ * range being provided - if that happens loop again.
+ */
+ count = 10;
+ do {
+ reg = snd_soc_read(codec, WM8958_MIC_DETECT_3);
+ if (reg < 0) {
+ dev_err(codec->dev,
+ "Failed to read mic detect status: %d\n",
+ reg);
+ return IRQ_NONE;
+ }
- if (!(reg & WM8958_MICD_VALID)) {
- dev_dbg(codec->dev, "Mic detect data not valid\n");
- goto out;
- }
+ if (!(reg & WM8958_MICD_VALID)) {
+ dev_dbg(codec->dev, "Mic detect data not valid\n");
+ goto out;
+ }
+
+ if (!(reg & WM8958_MICD_STS) || (reg & WM8958_MICD_LVL_MASK))
+ break;
+
+ msleep(1);
+ } while (count--);
+
+ if (count == 0)
+ dev_warn(codec->dev, "No impedence range reported for jack\n");
#ifndef CONFIG_SND_SOC_WM8994_MODULE
trace_snd_soc_jack_irq(dev_name(codec->dev));
wm8994_request_irq(codec->control_data, WM8994_IRQ_FIFOS_ERR,
wm8994_fifo_error, "FIFO error", codec);
- wm8994_request_irq(wm8994->control_data, WM8994_IRQ_TEMP_WARN,
+ wm8994_request_irq(codec->control_data, WM8994_IRQ_TEMP_WARN,
wm8994_temp_warn, "Thermal warning", codec);
- wm8994_request_irq(wm8994->control_data, WM8994_IRQ_TEMP_SHUT,
+ wm8994_request_irq(codec->control_data, WM8994_IRQ_TEMP_SHUT,
wm8994_temp_shut, "Thermal shutdown", codec);
ret = wm8994_request_irq(codec->control_data, WM8994_IRQ_DCS_DONE,
* interface to ALSA control for feature/mixer units
*/
+/* volume control quirks */
+static void volume_control_quirks(struct usb_mixer_elem_info *cval,
+ struct snd_kcontrol *kctl)
+{
+ switch (cval->mixer->chip->usb_id) {
+ case USB_ID(0x0471, 0x0101):
+ case USB_ID(0x0471, 0x0104):
+ case USB_ID(0x0471, 0x0105):
+ case USB_ID(0x0672, 0x1041):
+ /* quirk for UDA1321/N101.
+ * note that detection between firmware 2.1.1.7 (N101)
+ * and later 2.1.1.21 is not very clear from datasheets.
+ * I hope that the min value is -15360 for newer firmware --jk
+ */
+ if (!strcmp(kctl->id.name, "PCM Playback Volume") &&
+ cval->min == -15616) {
+ snd_printk(KERN_INFO
+ "set volume quirk for UDA1321/N101 chip\n");
+ cval->max = -256;
+ }
+ break;
+
+ case USB_ID(0x046d, 0x09a4):
+ if (!strcmp(kctl->id.name, "Mic Capture Volume")) {
+ snd_printk(KERN_INFO
+ "set volume quirk for QuickCam E3500\n");
+ cval->min = 6080;
+ cval->max = 8768;
+ cval->res = 192;
+ }
+ break;
+
+ case USB_ID(0x046d, 0x0808):
+ case USB_ID(0x046d, 0x0809):
+ case USB_ID(0x046d, 0x081d): /* HD Webcam c510 */
+ case USB_ID(0x046d, 0x0991):
+ /* Most audio usb devices lie about volume resolution.
+ * Most Logitech webcams have res = 384.
+ * Proboly there is some logitech magic behind this number --fishor
+ */
+ if (!strcmp(kctl->id.name, "Mic Capture Volume")) {
+ snd_printk(KERN_INFO
+ "set resolution quirk: cval->res = 384\n");
+ cval->res = 384;
+ }
+ break;
+
+ }
+}
+
/*
* retrieve the minimum and maximum values for the specified control
*/
-static int get_min_max(struct usb_mixer_elem_info *cval, int default_min)
+static int get_min_max_with_quirks(struct usb_mixer_elem_info *cval,
+ int default_min, struct snd_kcontrol *kctl)
{
/* for failsafe */
cval->min = default_min;
cval->initialized = 1;
}
+ if (kctl)
+ volume_control_quirks(cval, kctl);
+
/* USB descriptions contain the dB scale in 1/256 dB unit
* while ALSA TLV contains in 1/100 dB unit
*/
return 0;
}
+#define get_min_max(cval, def) get_min_max_with_quirks(cval, def, NULL)
/* get a feature/mixer unit info */
static int mixer_ctl_feature_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo)
uinfo->value.integer.max = 1;
} else {
if (!cval->initialized) {
- get_min_max(cval, 0);
+ get_min_max_with_quirks(cval, 0, kcontrol);
if (cval->initialized && cval->dBmin >= cval->dBmax) {
kcontrol->vd[0].access &=
~(SNDRV_CTL_ELEM_ACCESS_TLV_READ |
cval->ch_readonly = readonly_mask;
}
- /* get min/max values */
- get_min_max(cval, 0);
-
/* if all channels in the mask are marked read-only, make the control
* read-only. set_cur_mix_value() will check the mask again and won't
* issue write commands to read-only channels. */
len = snd_usb_copy_string_desc(state, nameid,
kctl->id.name, sizeof(kctl->id.name));
+ /* get min/max values */
+ get_min_max_with_quirks(cval, 0, kctl);
+
switch (control) {
case UAC_FU_MUTE:
case UAC_FU_VOLUME:
break;
}
- /* volume control quirks */
- switch (state->chip->usb_id) {
- case USB_ID(0x0471, 0x0101):
- case USB_ID(0x0471, 0x0104):
- case USB_ID(0x0471, 0x0105):
- case USB_ID(0x0672, 0x1041):
- /* quirk for UDA1321/N101.
- * note that detection between firmware 2.1.1.7 (N101)
- * and later 2.1.1.21 is not very clear from datasheets.
- * I hope that the min value is -15360 for newer firmware --jk
- */
- if (!strcmp(kctl->id.name, "PCM Playback Volume") &&
- cval->min == -15616) {
- snd_printk(KERN_INFO
- "set volume quirk for UDA1321/N101 chip\n");
- cval->max = -256;
- }
- break;
-
- case USB_ID(0x046d, 0x09a4):
- if (!strcmp(kctl->id.name, "Mic Capture Volume")) {
- snd_printk(KERN_INFO
- "set volume quirk for QuickCam E3500\n");
- cval->min = 6080;
- cval->max = 8768;
- cval->res = 192;
- }
- break;
-
- case USB_ID(0x046d, 0x0808):
- case USB_ID(0x046d, 0x0809):
- case USB_ID(0x046d, 0x0991):
- /* Most audio usb devices lie about volume resolution.
- * Most Logitech webcams have res = 384.
- * Proboly there is some logitech magic behind this number --fishor
- */
- if (!strcmp(kctl->id.name, "Mic Capture Volume")) {
- snd_printk(KERN_INFO
- "set resolution quirk: cval->res = 384\n");
- cval->res = 384;
- }
- break;
-
- }
-
range = (cval->max - cval->min) / cval->res;
/* Are there devices with volume range more than 255? I use a bit more
* to be sure. 384 is a resolution magic number found on Logitech
return -ENOMEM;
}
if (fp->nr_rates > 0) {
- rate_table = kmalloc(sizeof(int) * fp->nr_rates, GFP_KERNEL);
+ rate_table = kmemdup(fp->rate_table,
+ sizeof(int) * fp->nr_rates, GFP_KERNEL);
if (!rate_table) {
kfree(fp);
return -ENOMEM;
}
- memcpy(rate_table, fp->rate_table, sizeof(int) * fp->nr_rates);
fp->rate_table = rate_table;
}
if (altsd->bNumEndpoints != 1)
return -ENXIO;
- fp = kmalloc(sizeof(*fp), GFP_KERNEL);
+ fp = kmemdup(&ua_format, sizeof(*fp), GFP_KERNEL);
if (!fp)
return -ENOMEM;
- memcpy(fp, &ua_format, sizeof(*fp));
fp->iface = altsd->bInterfaceNumber;
fp->endpoint = get_endpoint(alts, 0)->bEndpointAddress;
$default{"BISECT_SKIP"} = 1;
$default{"SUCCESS_LINE"} = "login:";
$default{"DETECT_TRIPLE_FAULT"} = 1;
+$default{"NO_INSTALL"} = 0;
$default{"BOOTED_TIMEOUT"} = 1;
$default{"DIE_ON_FAILURE"} = 1;
$default{"SSH_EXEC"} = "ssh \$SSH_USER\@\$MACHINE \$SSH_COMMAND";
my $target;
my $make;
my $post_install;
+my $no_install;
my $noclean;
my $minconfig;
my $start_minconfig;
my $booted_timeout;
my $detect_triplefault;
my $console;
+my $reboot_success_line;
my $success_line;
my $stop_after_success;
my $stop_after_failure;
my %variable;
my %force_config;
+# do not force reboots on config problems
+my $no_reboot = 1;
+
+# default variables that can be used
+chomp ($variable{"PWD"} = `pwd`);
+
$config_help{"MACHINE"} = << "EOF"
The machine hostname that you will test.
EOF
sub get_ktest_config {
my ($config) = @_;
+ my $ans;
return if (defined($opt{$config}));
if (defined($default{$config})) {
print "\[$default{$config}\] ";
}
- $entered_configs{$config} = <STDIN>;
- $entered_configs{$config} =~ s/^\s*(.*\S)\s*$/$1/;
- if ($entered_configs{$config} =~ /^\s*$/) {
+ $ans = <STDIN>;
+ $ans =~ s/^\s*(.*\S)\s*$/$1/;
+ if ($ans =~ /^\s*$/) {
if ($default{$config}) {
- $entered_configs{$config} = $default{$config};
+ $ans = $default{$config};
} else {
print "Your answer can not be blank\n";
next;
}
}
+ $entered_configs{$config} = process_variables($ans);
last;
}
}
}
sub process_variables {
- my ($value) = @_;
+ my ($value, $remove_undef) = @_;
my $retval = "";
# We want to check for '\', and it is just easier
$retval = "$retval$begin";
if (defined($variable{$var})) {
$retval = "$retval$variable{$var}";
+ } elsif (defined($remove_undef) && $remove_undef) {
+ # for if statements, any variable that is not defined,
+ # we simple convert to 0
+ $retval = "${retval}0";
} else {
# put back the origin piece.
$retval = "$retval\$\{$var\}";
}
sub set_value {
- my ($lvalue, $rvalue) = @_;
+ my ($lvalue, $rvalue, $override, $overrides, $name) = @_;
if (defined($opt{$lvalue})) {
- die "Error: Option $lvalue defined more than once!\n";
+ if (!$override || defined(${$overrides}{$lvalue})) {
+ my $extra = "";
+ if ($override) {
+ $extra = "In the same override section!\n";
+ }
+ die "$name: $.: Option $lvalue defined more than once!\n$extra";
+ }
+ ${$overrides}{$lvalue} = $rvalue;
}
if ($rvalue =~ /^\s*$/) {
delete $opt{$lvalue};
}
}
-sub read_config {
- my ($config) = @_;
+sub process_compare {
+ my ($lval, $cmp, $rval) = @_;
+
+ # remove whitespace
+
+ $lval =~ s/^\s*//;
+ $lval =~ s/\s*$//;
+
+ $rval =~ s/^\s*//;
+ $rval =~ s/\s*$//;
+
+ if ($cmp eq "==") {
+ return $lval eq $rval;
+ } elsif ($cmp eq "!=") {
+ return $lval ne $rval;
+ }
+
+ my $statement = "$lval $cmp $rval";
+ my $ret = eval $statement;
+
+ # $@ stores error of eval
+ if ($@) {
+ return -1;
+ }
+
+ return $ret;
+}
+
+sub value_defined {
+ my ($val) = @_;
+
+ return defined($variable{$2}) ||
+ defined($opt{$2});
+}
+
+my $d = 0;
+sub process_expression {
+ my ($name, $val) = @_;
+
+ my $c = $d++;
+
+ while ($val =~ s/\(([^\(]*?)\)/\&\&\&\&VAL\&\&\&\&/) {
+ my $express = $1;
+
+ if (process_expression($name, $express)) {
+ $val =~ s/\&\&\&\&VAL\&\&\&\&/ 1 /;
+ } else {
+ $val =~ s/\&\&\&\&VAL\&\&\&\&/ 0 /;
+ }
+ }
+
+ $d--;
+ my $OR = "\\|\\|";
+ my $AND = "\\&\\&";
+
+ while ($val =~ s/^(.*?)($OR|$AND)//) {
+ my $express = $1;
+ my $op = $2;
+
+ if (process_expression($name, $express)) {
+ if ($op eq "||") {
+ return 1;
+ }
+ } else {
+ if ($op eq "&&") {
+ return 0;
+ }
+ }
+ }
+
+ if ($val =~ /(.*)(==|\!=|>=|<=|>|<)(.*)/) {
+ my $ret = process_compare($1, $2, $3);
+ if ($ret < 0) {
+ die "$name: $.: Unable to process comparison\n";
+ }
+ return $ret;
+ }
+
+ if ($val =~ /^\s*(NOT\s*)?DEFINED\s+(\S+)\s*$/) {
+ if (defined $1) {
+ return !value_defined($2);
+ } else {
+ return value_defined($2);
+ }
+ }
+
+ if ($val =~ /^\s*0\s*$/) {
+ return 0;
+ } elsif ($val =~ /^\s*\d+\s*$/) {
+ return 1;
+ }
+
+ die ("$name: $.: Undefined content $val in if statement\n");
+}
+
+sub process_if {
+ my ($name, $value) = @_;
+
+ # Convert variables and replace undefined ones with 0
+ my $val = process_variables($value, 1);
+ my $ret = process_expression $name, $val;
+
+ return $ret;
+}
- open(IN, $config) || die "can't read file $config";
+sub __read_config {
+ my ($config, $current_test_num) = @_;
+
+ my $in;
+ open($in, $config) || die "can't read file $config";
my $name = $config;
$name =~ s,.*/(.*),$1,;
- my $test_num = 0;
+ my $test_num = $$current_test_num;
my $default = 1;
my $repeat = 1;
my $num_tests_set = 0;
my $skip = 0;
my $rest;
+ my $line;
my $test_case = 0;
+ my $if = 0;
+ my $if_set = 0;
+ my $override = 0;
- while (<IN>) {
+ my %overrides;
+
+ while (<$in>) {
# ignore blank lines and comments
next if (/^\s*$/ || /\s*\#/);
- if (/^\s*TEST_START(.*)/) {
+ if (/^\s*(TEST_START|DEFAULTS)\b(.*)/) {
- $rest = $1;
+ my $type = $1;
+ $rest = $2;
+ $line = $2;
- if ($num_tests_set) {
- die "$name: $.: Can not specify both NUM_TESTS and TEST_START\n";
- }
+ my $old_test_num;
+ my $old_repeat;
+ $override = 0;
+
+ if ($type eq "TEST_START") {
+
+ if ($num_tests_set) {
+ die "$name: $.: Can not specify both NUM_TESTS and TEST_START\n";
+ }
- my $old_test_num = $test_num;
- my $old_repeat = $repeat;
+ $old_test_num = $test_num;
+ $old_repeat = $repeat;
- $test_num += $repeat;
- $default = 0;
- $repeat = 1;
+ $test_num += $repeat;
+ $default = 0;
+ $repeat = 1;
+ } else {
+ $default = 1;
+ }
- if ($rest =~ /\s+SKIP(.*)/) {
- $rest = $1;
+ # If SKIP is anywhere in the line, the command will be skipped
+ if ($rest =~ s/\s+SKIP\b//) {
$skip = 1;
} else {
$test_case = 1;
$skip = 0;
}
- if ($rest =~ /\s+ITERATE\s+(\d+)(.*)$/) {
- $repeat = $1;
- $rest = $2;
- $repeat_tests{"$test_num"} = $repeat;
+ if ($rest =~ s/\sELSE\b//) {
+ if (!$if) {
+ die "$name: $.: ELSE found with out matching IF section\n$_";
+ }
+ $if = 0;
+
+ if ($if_set) {
+ $skip = 1;
+ } else {
+ $skip = 0;
+ }
}
- if ($rest =~ /\s+SKIP(.*)/) {
- $rest = $1;
- $skip = 1;
+ if ($rest =~ s/\sIF\s+(.*)//) {
+ if (process_if($name, $1)) {
+ $if_set = 1;
+ } else {
+ $skip = 1;
+ }
+ $if = 1;
+ } else {
+ $if = 0;
+ $if_set = 0;
}
- if ($rest !~ /^\s*$/) {
- die "$name: $.: Gargbage found after TEST_START\n$_";
+ if (!$skip) {
+ if ($type eq "TEST_START") {
+ if ($rest =~ s/\s+ITERATE\s+(\d+)//) {
+ $repeat = $1;
+ $repeat_tests{"$test_num"} = $repeat;
+ }
+ } elsif ($rest =~ s/\sOVERRIDE\b//) {
+ # DEFAULT only
+ $override = 1;
+ # Clear previous overrides
+ %overrides = ();
+ }
+ }
+
+ if (!$skip && $rest !~ /^\s*$/) {
+ die "$name: $.: Gargbage found after $type\n$_";
}
- if ($skip) {
+ if ($skip && $type eq "TEST_START") {
$test_num = $old_test_num;
$repeat = $old_repeat;
}
- } elsif (/^\s*DEFAULTS(.*)$/) {
- $default = 1;
-
+ } elsif (/^\s*ELSE\b(.*)$/) {
+ if (!$if) {
+ die "$name: $.: ELSE found with out matching IF section\n$_";
+ }
$rest = $1;
-
- if ($rest =~ /\s+SKIP(.*)/) {
- $rest = $1;
+ if ($if_set) {
$skip = 1;
+ $rest = "";
} else {
$skip = 0;
+
+ if ($rest =~ /\sIF\s+(.*)/) {
+ # May be a ELSE IF section.
+ if (!process_if($name, $1)) {
+ $skip = 1;
+ }
+ $rest = "";
+ } else {
+ $if = 0;
+ }
}
if ($rest !~ /^\s*$/) {
die "$name: $.: Gargbage found after DEFAULTS\n$_";
}
+ } elsif (/^\s*INCLUDE\s+(\S+)/) {
+
+ next if ($skip);
+
+ if (!$default) {
+ die "$name: $.: INCLUDE can only be done in default sections\n$_";
+ }
+
+ my $file = process_variables($1);
+
+ if ($file !~ m,^/,) {
+ # check the path of the config file first
+ if ($config =~ m,(.*)/,) {
+ if (-f "$1/$file") {
+ $file = "$1/$file";
+ }
+ }
+ }
+
+ if ( ! -r $file ) {
+ die "$name: $.: Can't read file $file\n$_";
+ }
+
+ if (__read_config($file, \$test_num)) {
+ $test_case = 1;
+ }
+
} elsif (/^\s*([A-Z_\[\]\d]+)\s*=\s*(.*?)\s*$/) {
next if ($skip);
}
if ($default || $lvalue =~ /\[\d+\]$/) {
- set_value($lvalue, $rvalue);
+ set_value($lvalue, $rvalue, $override, \%overrides, $name);
} else {
my $val = "$lvalue\[$test_num\]";
- set_value($val, $rvalue);
+ set_value($val, $rvalue, $override, \%overrides, $name);
if ($repeat > 1) {
$repeats{$val} = $repeat;
}
}
- close(IN);
-
if ($test_num) {
$test_num += $repeat - 1;
$opt{"NUM_TESTS"} = $test_num;
}
+ close($in);
+
+ $$current_test_num = $test_num;
+
+ return $test_case;
+}
+
+sub read_config {
+ my ($config) = @_;
+
+ my $test_case;
+ my $test_num = 0;
+
+ $test_case = __read_config $config, \$test_num;
+
# make sure we have all mandatory configs
get_ktest_configs;
}
sub run_command;
+sub start_monitor;
+sub end_monitor;
+sub wait_for_monitor;
sub reboot {
+ my ($time) = @_;
+
+ if (defined($time)) {
+ start_monitor;
+ # flush out current monitor
+ # May contain the reboot success line
+ wait_for_monitor 1;
+ }
+
# try to reboot normally
if (run_command $reboot) {
if (defined($powercycle_after_reboot)) {
# nope? power cycle it.
run_command "$power_cycle";
}
+
+ if (defined($time)) {
+ wait_for_monitor($time, $reboot_success_line);
+ end_monitor;
+ }
}
sub do_not_reboot {
my $i = $iteration;
- return $test_type eq "build" ||
+ return $test_type eq "build" || $no_reboot ||
($test_type eq "patchcheck" && $opt{"PATCHCHECK_TYPE[$i]"} eq "build") ||
($test_type eq "bisect" && $opt{"BISECT_TYPE[$i]"} eq "build");
}
}
sub wait_for_monitor {
- my ($time) = @_;
+ my ($time, $stop) = @_;
+ my $full_line = "";
my $line;
+ my $booted = 0;
doprint "** Wait for monitor to settle down **\n";
# read the monitor and wait for the system to calm down
- do {
+ while (!$booted) {
$line = wait_for_input($monitor_fp, $time);
- print "$line" if (defined($line));
- } while (defined($line));
+ last if (!defined($line));
+ print "$line";
+ $full_line .= $line;
+
+ if (defined($stop) && $full_line =~ /$stop/) {
+ doprint "wait for monitor detected $stop\n";
+ $booted = 1;
+ }
+
+ if ($line =~ /\n/) {
+ $full_line = "";
+ }
+ }
print "** Monitor flushed **\n";
}
# no need to reboot for just building.
if (!do_not_reboot) {
doprint "REBOOTING\n";
- reboot;
- start_monitor;
- wait_for_monitor $sleep_time;
- end_monitor;
+ reboot $sleep_time;
}
my $name = "";
open(IN, "$ssh_grub |")
or die "unable to get menu.lst";
+ my $found = 0;
+
while (<IN>) {
if (/^\s*title\s+$grub_menu\s*$/) {
$grub_number++;
+ $found = 1;
last;
} elsif (/^\s*title\s/) {
$grub_number++;
close(IN);
die "Could not find '$grub_menu' in /boot/grub/menu on $machine"
- if ($grub_number < 0);
+ if (!$found);
doprint "$grub_number\n";
}
sub reboot_to {
if ($reboot_type eq "grub") {
- run_ssh "'(echo \"savedefault --default=$grub_number --once\" | grub --batch && reboot)'";
+ run_ssh "'(echo \"savedefault --default=$grub_number --once\" | grub --batch)'";
+ reboot;
return;
}
sub install {
+ return if ($no_install);
+
run_scp "$outputdir/$build_target", "$target_image" or
dodie "failed to copy image";
}
sub start_monitor_and_boot {
+ # Make sure the stable kernel has finished booting
+ start_monitor;
+ wait_for_monitor 5;
+ end_monitor;
+
get_grub_index;
get_version;
install;
unlink $buildlog;
+ # Failed builds should not reboot the target
+ my $save_no_reboot = $no_reboot;
+ $no_reboot = 1;
+
if (defined($pre_build)) {
my $ret = run_command $pre_build;
if (!$ret && defined($pre_build_die) &&
# allow for empty configs
run_command "touch $output_config";
- run_command "mv $output_config $outputdir/config_temp" or
- dodie "moving .config";
+ if (!$noclean) {
+ run_command "mv $output_config $outputdir/config_temp" or
+ dodie "moving .config";
- if (!$noclean && !run_command "$make mrproper") {
- dodie "make mrproper";
- }
+ run_command "$make mrproper" or dodie "make mrproper";
- run_command "mv $outputdir/config_temp $output_config" or
- dodie "moving config_temp";
+ run_command "mv $outputdir/config_temp $output_config" or
+ dodie "moving config_temp";
+ }
} elsif (!$noclean) {
unlink "$output_config";
if (!$build_ret) {
# bisect may need this to pass
- return 0 if ($in_bisect);
+ if ($in_bisect) {
+ $no_reboot = $save_no_reboot;
+ return 0;
+ }
fail "failed build" and return 0;
}
+ $no_reboot = $save_no_reboot;
+
return 1;
}
if ($i != $opt{"NUM_TESTS"} && !do_not_reboot) {
doprint "Reboot and wait $sleep_time seconds\n";
- reboot;
- start_monitor;
- wait_for_monitor $sleep_time;
- end_monitor;
+ reboot $sleep_time;
}
}
sub bisect_reboot {
doprint "Reboot and sleep $bisect_sleep_time seconds\n";
- reboot;
- start_monitor;
- wait_for_monitor $bisect_sleep_time;
- end_monitor;
+ reboot $bisect_sleep_time;
}
# returns 1 on success, 0 on failure, -1 on skip
sub patchcheck_reboot {
doprint "Reboot and sleep $patchcheck_sleep_time seconds\n";
- reboot;
- start_monitor;
- wait_for_monitor $patchcheck_sleep_time;
- end_monitor;
+ reboot $patchcheck_sleep_time;
}
sub patchcheck {
}
my %depends;
+my %depcount;
my $iflevel = 0;
my @ifdeps;
# prevent recursion
my %read_kconfigs;
+sub add_dep {
+ # $config depends on $dep
+ my ($config, $dep) = @_;
+
+ if (defined($depends{$config})) {
+ $depends{$config} .= " " . $dep;
+ } else {
+ $depends{$config} = $dep;
+ }
+
+ # record the number of configs depending on $dep
+ if (defined $depcount{$dep}) {
+ $depcount{$dep}++;
+ } else {
+ $depcount{$dep} = 1;
+ }
+}
+
# taken from streamline_config.pl
sub read_kconfig {
my ($kconfig) = @_;
$config = $2;
for (my $i = 0; $i < $iflevel; $i++) {
- if ($i) {
- $depends{$config} .= " " . $ifdeps[$i];
- } else {
- $depends{$config} = $ifdeps[$i];
- }
- $state = "DEP";
+ add_dep $config, $ifdeps[$i];
}
# collect the depends for the config
} elsif ($state eq "NEW" && /^\s*depends\s+on\s+(.*)$/) {
- if (defined($depends{$1})) {
- $depends{$config} .= " " . $1;
- } else {
- $depends{$config} = $1;
- }
+ add_dep $config, $1;
# Get the configs that select this config
- } elsif ($state ne "NONE" && /^\s*select\s+(\S+)/) {
- if (defined($depends{$1})) {
- $depends{$1} .= " " . $config;
- } else {
- $depends{$1} = $config;
- }
+ } elsif ($state eq "NEW" && /^\s*select\s+(\S+)/) {
+
+ # selected by depends on config
+ add_dep $1, $config;
# Check for if statements
} elsif (/^if\s+(.*\S)\s*$/) {
close OUT;
}
+sub chomp_config {
+ my ($config) = @_;
+
+ $config =~ s/CONFIG_//;
+
+ return $config;
+}
+
sub get_depends {
my ($dep) = @_;
- my $kconfig = $dep;
- $kconfig =~ s/CONFIG_//;
+ my $kconfig = chomp_config $dep;
$dep = $depends{"$kconfig"};
return undef;
}
- my $kconfig = $config;
- $kconfig =~ s/CONFIG_//;
+ my $kconfig = chomp_config $config;
# Test dependencies first
if (defined($depends{"$kconfig"})) {
my @config_keys = keys %min_configs;
+ # All configs need a depcount
+ foreach my $config (@config_keys) {
+ my $kconfig = chomp_config $config;
+ if (!defined $depcount{$kconfig}) {
+ $depcount{$kconfig} = 0;
+ }
+ }
+
# Remove anything that was set by the make allnoconfig
# we shouldn't need them as they get set for us anyway.
foreach my $config (@config_keys) {
# Now disable each config one by one and do a make oldconfig
# till we find a config that changes our list.
- # Put configs that did not modify the config at the end.
my @test_configs = keys %min_configs;
+
+ # Sort keys by who is most dependent on
+ @test_configs = sort { $depcount{chomp_config($b)} <=> $depcount{chomp_config($a)} }
+ @test_configs ;
+
+ # Put configs that did not modify the config at the end.
my $reset = 1;
for (my $i = 0; $i < $#test_configs; $i++) {
if (!defined($nochange_config{$test_configs[0]})) {
}
doprint "Reboot and wait $sleep_time seconds\n";
- reboot;
- start_monitor;
- wait_for_monitor $sleep_time;
- end_monitor;
+ reboot $sleep_time;
}
success $i;
# First we need to do is the builds
for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
+ # Do not reboot on failing test options
+ $no_reboot = 1;
+
$iteration = $i;
my $makecmd = set_test_option("MAKE_CMD", $i);
$reboot_type = set_test_option("REBOOT_TYPE", $i);
$grub_menu = set_test_option("GRUB_MENU", $i);
$post_install = set_test_option("POST_INSTALL", $i);
+ $no_install = set_test_option("NO_INSTALL", $i);
$reboot_script = set_test_option("REBOOT_SCRIPT", $i);
$reboot_on_error = set_test_option("REBOOT_ON_ERROR", $i);
$poweroff_on_error = set_test_option("POWEROFF_ON_ERROR", $i);
$console = set_test_option("CONSOLE", $i);
$detect_triplefault = set_test_option("DETECT_TRIPLE_FAULT", $i);
$success_line = set_test_option("SUCCESS_LINE", $i);
+ $reboot_success_line = set_test_option("REBOOT_SUCCESS_LINE", $i);
$stop_after_success = set_test_option("STOP_AFTER_SUCCESS", $i);
$stop_after_failure = set_test_option("STOP_AFTER_FAILURE", $i);
$stop_test_after = set_test_option("STOP_TEST_AFTER", $i);
chdir $builddir || die "can't change directory to $builddir";
- if (!-d $tmpdir) {
- mkpath($tmpdir) or
- die "can't create $tmpdir";
+ foreach my $dir ($tmpdir, $outputdir) {
+ if (!-d $dir) {
+ mkpath($dir) or
+ die "can't create $dir";
+ }
}
$ENV{"SSH_USER"} = $ssh_user;
$run_type = "ERROR";
}
+ my $installme = "";
+ $installme = " no_install" if ($no_install);
+
doprint "\n\n";
- doprint "RUNNING TEST $i of $opt{NUM_TESTS} with option $test_type $run_type\n\n";
+ doprint "RUNNING TEST $i of $opt{NUM_TESTS} with option $test_type $run_type$installme\n\n";
unlink $dmesg;
unlink $buildlog;
die "failed to checkout $checkout";
}
+ $no_reboot = 0;
+
+
if ($test_type eq "bisect") {
bisect $i;
next;
build $build_type or next;
}
+ if ($test_type eq "install") {
+ get_version;
+ install;
+ success $i;
+ next;
+ }
+
if ($test_type ne "build") {
my $failed = 0;
start_monitor_and_boot or $failed = 1;
# the same option name under the same test or as default
# ktest will fail to execute, and no tests will run.
#
+# DEFAULTS OVERRIDE
+#
+# Options defined in the DEFAULTS section can not be duplicated
+# even if they are defined in two different DEFAULT sections.
+# This is done to catch mistakes where an option is added but
+# the previous option was forgotten about and not commented.
+#
+# The OVERRIDE keyword can be added to a section to allow this
+# section to override other DEFAULT sections values that have
+# been defined previously. It will only override options that
+# have been defined before its use. Options defined later
+# in a non override section will still error. The same option
+# can not be defined in the same section even if that section
+# is marked OVERRIDE.
+#
+#
+#
+# Both TEST_START and DEFAULTS sections can also have the IF keyword
+# The value after the IF must evaluate into a 0 or non 0 positive
+# integer, and can use the config variables (explained below).
+#
+# DEFAULTS IF ${IS_X86_32}
+#
+# The above will process the DEFAULTS section if the config
+# variable IS_X86_32 evaluates to a non zero positive integer
+# otherwise if it evaluates to zero, it will act the same
+# as if the SKIP keyword was used.
+#
+# The ELSE keyword can be used directly after a section with
+# a IF statement.
+#
+# TEST_START IF ${RUN_NET_TESTS}
+# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-network
+#
+# ELSE
+#
+# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-normal
+#
+#
+# The ELSE keyword can also contain an IF statement to allow multiple
+# if then else sections. But all the sections must be either
+# DEFAULT or TEST_START, they can not be a mixture.
+#
+# TEST_START IF ${RUN_NET_TESTS}
+# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-network
+#
+# ELSE IF ${RUN_DISK_TESTS}
+# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-tests
+#
+# ELSE IF ${RUN_CPU_TESTS}
+# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-cpu
+#
+# ELSE
+# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-network
+#
+# The if statement may also have comparisons that will and for
+# == and !=, strings may be used for both sides.
+#
+# BOX_TYPE := x86_32
+#
+# DEFAULTS IF ${BOX_TYPE} == x86_32
+# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-32
+# ELSE
+# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-64
+#
+# The DEFINED keyword can be used by the IF statements too.
+# It returns true if the given config variable or option has been defined
+# or false otherwise.
+#
+#
+# DEFAULTS IF DEFINED USE_CC
+# CC := ${USE_CC}
+# ELSE
+# CC := gcc
+#
+#
+# As well as NOT DEFINED.
+#
+# DEFAULTS IF NOT DEFINED MAKE_CMD
+# MAKE_CMD := make ARCH=x86
+#
+#
+# And/or ops (&&,||) may also be used to make complex conditionals.
+#
+# TEST_START IF (DEFINED ALL_TESTS || ${MYTEST} == boottest) && ${MACHINE} == gandalf
+#
+# Notice the use of paranthesis. Without any paranthesis the above would be
+# processed the same as:
+#
+# TEST_START IF DEFINED ALL_TESTS || (${MYTEST} == boottest && ${MACHINE} == gandalf)
+#
+#
+#
+# INCLUDE file
+#
+# The INCLUDE keyword may be used in DEFAULT sections. This will
+# read another config file and process that file as well. The included
+# file can include other files, add new test cases or default
+# statements. Config variables will be passed to these files and changes
+# to config variables will be seen by top level config files. Including
+# a file is processed just like the contents of the file was cut and pasted
+# into the top level file, except, that include files that end with
+# TEST_START sections will have that section ended at the end of
+# the include file. That is, an included file is included followed
+# by another DEFAULT keyword.
+#
+# Unlike other files referenced in this config, the file path does not need
+# to be absolute. If the file does not start with '/', then the directory
+# that the current config file was located in is used. If no config by the
+# given name is found there, then the current directory is searched.
+#
+# INCLUDE myfile
+# DEFAULT
+#
+# is the same as:
+#
+# INCLUDE myfile
+#
+# Note, if the include file does not contain a full path, the file is
+# searched first by the location of the original include file, and then
+# by the location that ktest.pl was executed in.
+#
#### Config variables ####
#
# The default test type (default test)
# The test types may be:
-# build - only build the kernel, do nothing else
-# boot - build and boot the kernel
-# test - build, boot and if TEST is set, run the test script
+# build - only build the kernel, do nothing else
+# install - build and install, but do nothing else (does not reboot)
+# boot - build, install, and boot the kernel
+# test - build, boot and if TEST is set, run the test script
# (If TEST is not set, it defaults back to boot)
# bisect - Perform a bisect on the kernel (see BISECT_TYPE below)
# patchcheck - Do a test on a series of commits in git (see PATCHCHECK below)
# or on some systems:
#POST_INSTALL = ssh user@target /sbin/dracut -f /boot/initramfs-test.img $KERNEL_VERSION
+# If for some reason you just want to boot the kernel and you do not
+# want the test to install anything new. For example, you may just want
+# to boot test the same kernel over and over and do not want to go through
+# the hassle of installing anything, you can set this option to 1
+# (default 0)
+#NO_INSTALL = 1
+
# If there is a script that you require to run before the build is done
# you can specify it with PRE_BUILD.
#
# (default "login:")
#SUCCESS_LINE = login:
+# To speed up between reboots, defining a line that the
+# default kernel produces that represents that the default
+# kernel has successfully booted and can be used to pass
+# a new test kernel to it. Otherwise ktest.pl will wait till
+# SLEEP_TIME to continue.
+# (default undefined)
+#REBOOT_SUCCESS_LINE = login:
+
# In case the console constantly fills the screen, having
# a specified time to stop the test after success is recommended.
# (in seconds)
# another test. If a reboot to the reliable kernel happens,
# we wait SLEEP_TIME for the console to stop producing output
# before starting the next test.
+#
+# You can speed up reboot times even more by setting REBOOT_SUCCESS_LINE.
# (default 60)
#SLEEP_TIME = 60
git.openpandora.org / pandora-kernel.git / commitdiff