* cfg80211_bitrate_mask - masks for bitrate control
*/
struct cfg80211_bitrate_mask {
-/*
- * As discussed in Berlin, this struct really
- * should look like this:
-
struct {
u32 legacy;
- u8 mcs[IEEE80211_HT_MCS_MASK_LEN];
+ /* TODO: add support for masking MCS rates; e.g.: */
+ /* u8 mcs[IEEE80211_HT_MCS_MASK_LEN]; */
} control[IEEE80211_NUM_BANDS];
-
- * Since we can always fix in-kernel users, let's keep
- * it simpler for now:
- */
- u32 fixed; /* fixed bitrate, 0 == not fixed */
- u32 maxrate; /* in kbps, 0 == no limit */
};
/**
* struct cfg80211_pmksa - PMK Security Association
* @IEEE80211_TX_CTL_RATE_CTRL_PROBE: internal to mac80211, can be
* set by rate control algorithms to indicate probe rate, will
* be cleared for fragmented frames (except on the last fragment)
- * @IEEE80211_TX_INTFL_RCALGO: mac80211 internal flag, do not test or
- * set this flag in the driver; indicates that the rate control
- * algorithm was used and should be notified of TX status
* @IEEE80211_TX_INTFL_NEED_TXPROCESSING: completely internal to mac80211,
* used to indicate that a pending frame requires TX processing before
* it can be sent out.
IEEE80211_TX_STAT_AMPDU = BIT(10),
IEEE80211_TX_STAT_AMPDU_NO_BACK = BIT(11),
IEEE80211_TX_CTL_RATE_CTRL_PROBE = BIT(12),
- IEEE80211_TX_INTFL_RCALGO = BIT(13),
IEEE80211_TX_INTFL_NEED_TXPROCESSING = BIT(14),
IEEE80211_TX_INTFL_RETRIED = BIT(15),
IEEE80211_TX_INTFL_DONT_ENCRYPT = BIT(16),
* @short_preamble: whether mac80211 will request short-preamble transmission
* if the selected rate supports it
* @max_rate_idx: user-requested maximum rate (not MCS for now)
+ * (deprecated; this will be removed once drivers get updated to use
+ * rate_idx_mask)
+ * @rate_idx_mask: user-requested rate mask (not MCS for now)
* @skb: the skb that will be transmitted, the control information in it needs
* to be filled in
* @ap: whether this frame is sent out in AP mode
struct ieee80211_tx_rate reported_rate;
bool rts, short_preamble;
u8 max_rate_idx;
+ u32 rate_idx_mask;
bool ap;
};
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
int i;
- u32 target_rate;
- struct ieee80211_supported_band *sband;
/*
* This _could_ be supported by providing a hook for
if (local->hw.flags & IEEE80211_HW_HAS_RATE_CONTROL)
return -EOPNOTSUPP;
- sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
-
- /*
- * target_rate = -1, rate->fixed = 0 means auto only, so use all rates
- * target_rate = X, rate->fixed = 1 means only rate X
- * target_rate = X, rate->fixed = 0 means all rates <= X
- */
- sdata->max_ratectrl_rateidx = -1;
- sdata->force_unicast_rateidx = -1;
- if (mask->fixed)
- target_rate = mask->fixed / 100;
- else if (mask->maxrate)
- target_rate = mask->maxrate / 100;
- else
- return 0;
+ for (i = 0; i < IEEE80211_NUM_BANDS; i++)
+ sdata->rc_rateidx_mask[i] = mask->control[i].legacy;
- for (i = 0; i< sband->n_bitrates; i++) {
- if (target_rate != sband->bitrates[i].bitrate)
- continue;
-
- /* requested bitrate found */
- sdata->max_ratectrl_rateidx = i;
- if (mask->fixed)
- sdata->force_unicast_rateidx = i;
- return 0;
- }
-
- return -EINVAL;
+ return 0;
}
static int ieee80211_remain_on_channel(struct wiphy *wiphy,
/* common attributes */
IEEE80211_IF_FILE(drop_unencrypted, drop_unencrypted, DEC);
-IEEE80211_IF_FILE(force_unicast_rateidx, force_unicast_rateidx, DEC);
-IEEE80211_IF_FILE(max_ratectrl_rateidx, max_ratectrl_rateidx, DEC);
+IEEE80211_IF_FILE(rc_rateidx_mask_2ghz, rc_rateidx_mask[IEEE80211_BAND_2GHZ],
+ HEX);
+IEEE80211_IF_FILE(rc_rateidx_mask_5ghz, rc_rateidx_mask[IEEE80211_BAND_5GHZ],
+ HEX);
/* STA attributes */
IEEE80211_IF_FILE(bssid, u.mgd.bssid, MAC);
static void add_sta_files(struct ieee80211_sub_if_data *sdata)
{
DEBUGFS_ADD(drop_unencrypted, sta);
- DEBUGFS_ADD(force_unicast_rateidx, sta);
- DEBUGFS_ADD(max_ratectrl_rateidx, sta);
+ DEBUGFS_ADD(rc_rateidx_mask_2ghz, sta);
+ DEBUGFS_ADD(rc_rateidx_mask_5ghz, sta);
DEBUGFS_ADD(bssid, sta);
DEBUGFS_ADD(aid, sta);
static void add_ap_files(struct ieee80211_sub_if_data *sdata)
{
DEBUGFS_ADD(drop_unencrypted, ap);
- DEBUGFS_ADD(force_unicast_rateidx, ap);
- DEBUGFS_ADD(max_ratectrl_rateidx, ap);
+ DEBUGFS_ADD(rc_rateidx_mask_2ghz, ap);
+ DEBUGFS_ADD(rc_rateidx_mask_5ghz, ap);
DEBUGFS_ADD(num_sta_ps, ap);
DEBUGFS_ADD(dtim_count, ap);
static void add_wds_files(struct ieee80211_sub_if_data *sdata)
{
DEBUGFS_ADD(drop_unencrypted, wds);
- DEBUGFS_ADD(force_unicast_rateidx, wds);
- DEBUGFS_ADD(max_ratectrl_rateidx, wds);
+ DEBUGFS_ADD(rc_rateidx_mask_2ghz, wds);
+ DEBUGFS_ADD(rc_rateidx_mask_5ghz, wds);
DEBUGFS_ADD(peer, wds);
}
static void add_vlan_files(struct ieee80211_sub_if_data *sdata)
{
DEBUGFS_ADD(drop_unencrypted, vlan);
- DEBUGFS_ADD(force_unicast_rateidx, vlan);
- DEBUGFS_ADD(max_ratectrl_rateidx, vlan);
+ DEBUGFS_ADD(rc_rateidx_mask_2ghz, vlan);
+ DEBUGFS_ADD(rc_rateidx_mask_5ghz, vlan);
}
static void add_monitor_files(struct ieee80211_sub_if_data *sdata)
*/
struct ieee80211_if_ap *bss;
- int force_unicast_rateidx; /* forced TX rateidx for unicast frames */
- int max_ratectrl_rateidx; /* max TX rateidx for rate control */
+ /* bitmap of allowed (non-MCS) rate indexes for rate control */
+ u32 rc_rateidx_mask[IEEE80211_NUM_BANDS];
union {
struct ieee80211_if_ap ap;
INIT_LIST_HEAD(&sdata->key_list);
- sdata->force_unicast_rateidx = -1;
- sdata->max_ratectrl_rateidx = -1;
+ for (i = 0; i < IEEE80211_NUM_BANDS; i++) {
+ struct ieee80211_supported_band *sband;
+ sband = local->hw.wiphy->bands[i];
+ sdata->rc_rateidx_mask[i] =
+ sband ? (1 << sband->n_bitrates) - 1 : 0;
+ }
/* setup type-dependent data */
ieee80211_setup_sdata(sdata, type);
}
EXPORT_SYMBOL(rate_control_send_low);
+static void rate_idx_match_mask(struct ieee80211_tx_rate *rate,
+ int n_bitrates, u32 mask)
+{
+ int j;
+
+ /* See whether the selected rate or anything below it is allowed. */
+ for (j = rate->idx; j >= 0; j--) {
+ if (mask & (1 << j)) {
+ /* Okay, found a suitable rate. Use it. */
+ rate->idx = j;
+ return;
+ }
+ }
+
+ /* Try to find a higher rate that would be allowed */
+ for (j = rate->idx + 1; j < n_bitrates; j++) {
+ if (mask & (1 << j)) {
+ /* Okay, found a suitable rate. Use it. */
+ rate->idx = j;
+ return;
+ }
+ }
+
+ /*
+ * Uh.. No suitable rate exists. This should not really happen with
+ * sane TX rate mask configurations. However, should someone manage to
+ * configure supported rates and TX rate mask in incompatible way,
+ * allow the frame to be transmitted with whatever the rate control
+ * selected.
+ */
+}
+
void rate_control_get_rate(struct ieee80211_sub_if_data *sdata,
struct sta_info *sta,
struct ieee80211_tx_rate_control *txrc)
struct ieee80211_sta *ista = NULL;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(txrc->skb);
int i;
+ u32 mask;
if (sta) {
ista = &sta->sta;
info->control.rates[i].count = 1;
}
- if (sta && sdata->force_unicast_rateidx > -1) {
- info->control.rates[0].idx = sdata->force_unicast_rateidx;
- } else {
- ref->ops->get_rate(ref->priv, ista, priv_sta, txrc);
- info->flags |= IEEE80211_TX_INTFL_RCALGO;
- }
+ ref->ops->get_rate(ref->priv, ista, priv_sta, txrc);
/*
- * try to enforce the maximum rate the user wanted
+ * Try to enforce the rateidx mask the user wanted. skip this if the
+ * default mask (allow all rates) is used to save some processing for
+ * the common case.
*/
- if (sdata->max_ratectrl_rateidx > -1)
+ mask = sdata->rc_rateidx_mask[info->band];
+ if (mask != (1 << txrc->sband->n_bitrates) - 1) {
+ if (sta) {
+ /* Filter out rates that the STA does not support */
+ mask &= sta->sta.supp_rates[info->band];
+ }
+ /*
+ * Make sure the rate index selected for each TX rate is
+ * included in the configured mask and change the rate indexes
+ * if needed.
+ */
for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) {
+ /* Rate masking supports only legacy rates for now */
if (info->control.rates[i].flags & IEEE80211_TX_RC_MCS)
continue;
- info->control.rates[i].idx =
- min_t(s8, info->control.rates[i].idx,
- sdata->max_ratectrl_rateidx);
+ rate_idx_match_mask(&info->control.rates[i],
+ txrc->sband->n_bitrates, mask);
+ }
}
BUG_ON(info->control.rates[0].idx < 0);
struct rate_control_ref *ref = local->rate_ctrl;
struct ieee80211_sta *ista = &sta->sta;
void *priv_sta = sta->rate_ctrl_priv;
- struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
-
- if (likely(info->flags & IEEE80211_TX_INTFL_RCALGO))
- ref->ops->tx_status(ref->priv, sband, ista, priv_sta, skb);
+ ref->ops->tx_status(ref->priv, sband, ista, priv_sta, skb);
}
txrc.bss_conf = &tx->sdata->vif.bss_conf;
txrc.skb = tx->skb;
txrc.reported_rate.idx = -1;
- txrc.max_rate_idx = tx->sdata->max_ratectrl_rateidx;
+ txrc.rate_idx_mask = tx->sdata->rc_rateidx_mask[tx->channel->band];
+ if (txrc.rate_idx_mask == (1 << sband->n_bitrates) - 1)
+ txrc.max_rate_idx = -1;
+ else
+ txrc.max_rate_idx = fls(txrc.rate_idx_mask) - 1;
txrc.ap = tx->sdata->vif.type == NL80211_IFTYPE_AP;
/* set up RTS protection if desired */
txrc.bss_conf = &sdata->vif.bss_conf;
txrc.skb = skb;
txrc.reported_rate.idx = -1;
- txrc.max_rate_idx = sdata->max_ratectrl_rateidx;
+ txrc.rate_idx_mask = sdata->rc_rateidx_mask[band];
+ if (txrc.rate_idx_mask == (1 << sband->n_bitrates) - 1)
+ txrc.max_rate_idx = -1;
+ else
+ txrc.max_rate_idx = fls(txrc.rate_idx_mask) - 1;
txrc.ap = true;
rate_control_get_rate(sdata, NULL, &txrc);
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
struct cfg80211_bitrate_mask mask;
+ u32 fixed, maxrate;
+ struct ieee80211_supported_band *sband;
+ int band, ridx;
+ bool match = false;
if (!rdev->ops->set_bitrate_mask)
return -EOPNOTSUPP;
- mask.fixed = 0;
- mask.maxrate = 0;
+ memset(&mask, 0, sizeof(mask));
+ fixed = 0;
+ maxrate = 0;
if (rate->value < 0) {
/* nothing */
} else if (rate->fixed) {
- mask.fixed = rate->value / 1000; /* kbps */
+ fixed = rate->value / 100000;
} else {
- mask.maxrate = rate->value / 1000; /* kbps */
+ maxrate = rate->value / 100000;
+ }
+
+ for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
+ sband = wdev->wiphy->bands[band];
+ if (sband == NULL)
+ continue;
+ for (ridx = 0; ridx < sband->n_bitrates; ridx++) {
+ struct ieee80211_rate *srate = &sband->bitrates[ridx];
+ if (fixed == srate->bitrate) {
+ mask.control[band].legacy = 1 << ridx;
+ match = true;
+ break;
+ }
+ if (srate->bitrate <= maxrate) {
+ mask.control[band].legacy |= 1 << ridx;
+ match = true;
+ }
+ }
}
+ if (!match)
+ return -EINVAL;
+
return rdev->ops->set_bitrate_mask(wdev->wiphy, dev, NULL, &mask);
}
EXPORT_SYMBOL_GPL(cfg80211_wext_siwrate);
git.openpandora.org / pandora-kernel.git / commitdiff