ARM: mx5/mx53_evk: Make the reset pin name more meaningful

As there is a mx53_smd board in the kernel, using SMD_FEC_PHY_RST as the pin name can be misleading when used
on a MX53_EVK board.

Change the pin name to reflect the board name.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c
index d771999..2af3f43 100644 (file)
--- a/arch/arm/mach-mx5/board-mx53_evk.c
+++ b/arch/arm/mach-mx5/board-mx53_evk.c
@@ -34,7 +34,7 @@
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx53.h>
 
-#define SMD_FEC_PHY_RST                IMX_GPIO_NR(7, 6)
+#define MX53_EVK_FEC_PHY_RST   IMX_GPIO_NR(7, 6)
 #define EVK_ECSPI1_CS0         IMX_GPIO_NR(2, 30)
 #define EVK_ECSPI1_CS1         IMX_GPIO_NR(3, 19)
 
@@ -82,14 +82,14 @@ static inline void mx53_evk_fec_reset(void)
        int ret;
 
        /* reset FEC PHY */
-       ret = gpio_request_one(SMD_FEC_PHY_RST, GPIOF_OUT_INIT_LOW,
+       ret = gpio_request_one(MX53_EVK_FEC_PHY_RST, GPIOF_OUT_INIT_LOW,
                                                        "fec-phy-reset");
        if (ret) {
                printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
                return;
        }
        msleep(1);
-       gpio_set_value(SMD_FEC_PHY_RST, 1);
+       gpio_set_value(MX53_EVK_FEC_PHY_RST, 1);
 }
 
 static struct fec_platform_data mx53_evk_fec_pdata = {