Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
authorLinus Torvalds <torvalds@linux-foundation.org>
Tue, 18 Dec 2012 20:46:37 +0000 (12:46 -0800)
committerLinus Torvalds <torvalds@linux-foundation.org>
Tue, 18 Dec 2012 20:46:37 +0000 (12:46 -0800)
Pull second round of input updates from Dmitry Torokhov:
 "As usual, there are a couple of new drivers, input core now supports
  managed input devices (devres), a slew of drivers now have device tree
  support and a bunch of fixes and cleanups."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (71 commits)
  Input: walkera0701 - fix crash on startup
  Input: matrix-keymap - provide a proper module license
  Input: gpio_keys_polled - switch to using gpio_request_one()
  Input: gpio_keys - switch to using gpio_request_one()
  Input: wacom - fix touch support for Bamboo Fun CTH-461
  Input: xpad - add a few new VID/PID combinations
  Input: xpad - minor formatting fixes
  Input: gpio-keys-polled - honor 'autorepeat' setting in platform data
  Input: tca8418-keypad - switch to using managed resources
  Input: tca8418_keypad - increase severity of failures in probe()
  Input: tca8418_keypad - move device ID tables closer to where they are used
  Input: tca8418_keypad - use dev_get_platdata() to retrieve platform data
  Input: tca8418_keypad - use a temporary variable for parent device
  Input: tca8418_keypad - add support for shared interrupt
  Input: tca8418_keypad - add support for device tree bindings
  Input: remove Compaq iPAQ H3600 (Bitsy) touchscreen driver
  Input: bu21013_ts - add support for Device Tree booting
  Input: bu21013_ts - move GPIO init and exit functions into the driver
  Input: bu21013_ts - request regulator that actually exists
  ARM: ux500: Strip out duplicate touch screen platform information
  ...

12 files changed:
1  2 
arch/arm/mach-omap1/board-nokia770.c
drivers/input/input-mt.c
drivers/input/keyboard/Kconfig
drivers/input/misc/Kconfig
drivers/input/misc/Makefile
drivers/input/misc/da9052_onkey.c
drivers/input/touchscreen/Kconfig
drivers/input/touchscreen/Makefile
drivers/input/touchscreen/atmel_tsadcc.c
drivers/input/touchscreen/da9052_tsi.c
drivers/input/touchscreen/ti_am335x_tsc.c
drivers/mfd/stmpe.c

Simple merge
Simple merge
Simple merge
Simple merge
Simple merge
Simple merge
Simple merge
Simple merge
index 7a18a8a,0000000..51e7b87
mode 100644,000000..100644
--- /dev/null
@@@ -1,398 -1,0 +1,398 @@@
- static int __devinit titsc_probe(struct platform_device *pdev)
 +/*
 + * TI Touch Screen driver
 + *
 + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
 + *
 + * This program is free software; you can redistribute it and/or
 + * modify it under the terms of the GNU General Public License as
 + * published by the Free Software Foundation version 2.
 + *
 + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
 + * kind, whether express or implied; without even the implied warranty
 + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 + * GNU General Public License for more details.
 + */
 +
 +
 +#include <linux/init.h>
 +#include <linux/kernel.h>
 +#include <linux/err.h>
 +#include <linux/module.h>
 +#include <linux/input.h>
 +#include <linux/slab.h>
 +#include <linux/interrupt.h>
 +#include <linux/clk.h>
 +#include <linux/platform_device.h>
 +#include <linux/io.h>
 +#include <linux/input/ti_am335x_tsc.h>
 +#include <linux/delay.h>
 +
 +#include <linux/mfd/ti_am335x_tscadc.h>
 +
 +#define ADCFSM_STEPID         0x10
 +#define SEQ_SETTLE            275
 +#define MAX_12BIT             ((1 << 12) - 1)
 +
 +struct titsc {
 +      struct input_dev        *input;
 +      struct ti_tscadc_dev    *mfd_tscadc;
 +      unsigned int            irq;
 +      unsigned int            wires;
 +      unsigned int            x_plate_resistance;
 +      bool                    pen_down;
 +      int                     steps_to_configure;
 +};
 +
 +static unsigned int titsc_readl(struct titsc *ts, unsigned int reg)
 +{
 +      return readl(ts->mfd_tscadc->tscadc_base + reg);
 +}
 +
 +static void titsc_writel(struct titsc *tsc, unsigned int reg,
 +                                      unsigned int val)
 +{
 +      writel(val, tsc->mfd_tscadc->tscadc_base + reg);
 +}
 +
 +static void titsc_step_config(struct titsc *ts_dev)
 +{
 +      unsigned int    config;
 +      int i, total_steps;
 +
 +      /* Configure the Step registers */
 +      total_steps = 2 * ts_dev->steps_to_configure;
 +
 +      config = STEPCONFIG_MODE_HWSYNC |
 +                      STEPCONFIG_AVG_16 | STEPCONFIG_XPP;
 +      switch (ts_dev->wires) {
 +      case 4:
 +              config |= STEPCONFIG_INP_AN2 | STEPCONFIG_XNN;
 +              break;
 +      case 5:
 +              config |= STEPCONFIG_YNN |
 +                              STEPCONFIG_INP_AN4 | STEPCONFIG_XNN |
 +                              STEPCONFIG_YPP;
 +              break;
 +      case 8:
 +              config |= STEPCONFIG_INP_AN2 | STEPCONFIG_XNN;
 +              break;
 +      }
 +
 +      for (i = 1; i <= ts_dev->steps_to_configure; i++) {
 +              titsc_writel(ts_dev, REG_STEPCONFIG(i), config);
 +              titsc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY);
 +      }
 +
 +      config = 0;
 +      config = STEPCONFIG_MODE_HWSYNC |
 +                      STEPCONFIG_AVG_16 | STEPCONFIG_YNN |
 +                      STEPCONFIG_INM_ADCREFM | STEPCONFIG_FIFO1;
 +      switch (ts_dev->wires) {
 +      case 4:
 +              config |= STEPCONFIG_YPP;
 +              break;
 +      case 5:
 +              config |= STEPCONFIG_XPP | STEPCONFIG_INP_AN4 |
 +                              STEPCONFIG_XNP | STEPCONFIG_YPN;
 +              break;
 +      case 8:
 +              config |= STEPCONFIG_YPP;
 +              break;
 +      }
 +
 +      for (i = (ts_dev->steps_to_configure + 1); i <= total_steps; i++) {
 +              titsc_writel(ts_dev, REG_STEPCONFIG(i), config);
 +              titsc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY);
 +      }
 +
 +      config = 0;
 +      /* Charge step configuration */
 +      config = STEPCONFIG_XPP | STEPCONFIG_YNN |
 +                      STEPCHARGE_RFP_XPUL | STEPCHARGE_RFM_XNUR |
 +                      STEPCHARGE_INM_AN1 | STEPCHARGE_INP_AN1;
 +
 +      titsc_writel(ts_dev, REG_CHARGECONFIG, config);
 +      titsc_writel(ts_dev, REG_CHARGEDELAY, CHARGEDLY_OPENDLY);
 +
 +      config = 0;
 +      /* Configure to calculate pressure */
 +      config = STEPCONFIG_MODE_HWSYNC |
 +                      STEPCONFIG_AVG_16 | STEPCONFIG_YPP |
 +                      STEPCONFIG_XNN | STEPCONFIG_INM_ADCREFM;
 +      titsc_writel(ts_dev, REG_STEPCONFIG(total_steps + 1), config);
 +      titsc_writel(ts_dev, REG_STEPDELAY(total_steps + 1),
 +                      STEPCONFIG_OPENDLY);
 +
 +      config |= STEPCONFIG_INP_AN3 | STEPCONFIG_FIFO1;
 +      titsc_writel(ts_dev, REG_STEPCONFIG(total_steps + 2), config);
 +      titsc_writel(ts_dev, REG_STEPDELAY(total_steps + 2),
 +                      STEPCONFIG_OPENDLY);
 +
 +      titsc_writel(ts_dev, REG_SE, STPENB_STEPENB_TC);
 +}
 +
 +static void titsc_read_coordinates(struct titsc *ts_dev,
 +                                  unsigned int *x, unsigned int *y)
 +{
 +      unsigned int fifocount = titsc_readl(ts_dev, REG_FIFO0CNT);
 +      unsigned int prev_val_x = ~0, prev_val_y = ~0;
 +      unsigned int prev_diff_x = ~0, prev_diff_y = ~0;
 +      unsigned int read, diff;
 +      unsigned int i, channel;
 +
 +      /*
 +       * Delta filter is used to remove large variations in sampled
 +       * values from ADC. The filter tries to predict where the next
 +       * coordinate could be. This is done by taking a previous
 +       * coordinate and subtracting it form current one. Further the
 +       * algorithm compares the difference with that of a present value,
 +       * if true the value is reported to the sub system.
 +       */
 +      for (i = 0; i < fifocount - 1; i++) {
 +              read = titsc_readl(ts_dev, REG_FIFO0);
 +              channel = read & 0xf0000;
 +              channel = channel >> 0x10;
 +              if ((channel >= 0) && (channel < ts_dev->steps_to_configure)) {
 +                      read &= 0xfff;
 +                      diff = abs(read - prev_val_x);
 +                      if (diff < prev_diff_x) {
 +                              prev_diff_x = diff;
 +                              *x = read;
 +                      }
 +                      prev_val_x = read;
 +              }
 +
 +              read = titsc_readl(ts_dev, REG_FIFO1);
 +              channel = read & 0xf0000;
 +              channel = channel >> 0x10;
 +              if ((channel >= ts_dev->steps_to_configure) &&
 +                      (channel < (2 * ts_dev->steps_to_configure - 1))) {
 +                      read &= 0xfff;
 +                      diff = abs(read - prev_val_y);
 +                      if (diff < prev_diff_y) {
 +                              prev_diff_y = diff;
 +                              *y = read;
 +                      }
 +                      prev_val_y = read;
 +              }
 +      }
 +}
 +
 +static irqreturn_t titsc_irq(int irq, void *dev)
 +{
 +      struct titsc *ts_dev = dev;
 +      struct input_dev *input_dev = ts_dev->input;
 +      unsigned int status, irqclr = 0;
 +      unsigned int x = 0, y = 0;
 +      unsigned int z1, z2, z;
 +      unsigned int fsm;
 +      unsigned int fifo1count, fifo0count;
 +      int i;
 +
 +      status = titsc_readl(ts_dev, REG_IRQSTATUS);
 +      if (status & IRQENB_FIFO0THRES) {
 +              titsc_read_coordinates(ts_dev, &x, &y);
 +
 +              z1 = titsc_readl(ts_dev, REG_FIFO0) & 0xfff;
 +              z2 = titsc_readl(ts_dev, REG_FIFO1) & 0xfff;
 +
 +              fifo1count = titsc_readl(ts_dev, REG_FIFO1CNT);
 +              for (i = 0; i < fifo1count; i++)
 +                      titsc_readl(ts_dev, REG_FIFO1);
 +
 +              fifo0count = titsc_readl(ts_dev, REG_FIFO0CNT);
 +              for (i = 0; i < fifo0count; i++)
 +                      titsc_readl(ts_dev, REG_FIFO0);
 +
 +              if (ts_dev->pen_down && z1 != 0 && z2 != 0) {
 +                      /*
 +                       * Calculate pressure using formula
 +                       * Resistance(touch) = x plate resistance *
 +                       * x postion/4096 * ((z2 / z1) - 1)
 +                       */
 +                      z = z2 - z1;
 +                      z *= x;
 +                      z *= ts_dev->x_plate_resistance;
 +                      z /= z1;
 +                      z = (z + 2047) >> 12;
 +
 +                      if (z <= MAX_12BIT) {
 +                              input_report_abs(input_dev, ABS_X, x);
 +                              input_report_abs(input_dev, ABS_Y, y);
 +                              input_report_abs(input_dev, ABS_PRESSURE, z);
 +                              input_report_key(input_dev, BTN_TOUCH, 1);
 +                              input_sync(input_dev);
 +                      }
 +              }
 +              irqclr |= IRQENB_FIFO0THRES;
 +      }
 +
 +      /*
 +       * Time for sequencer to settle, to read
 +       * correct state of the sequencer.
 +       */
 +      udelay(SEQ_SETTLE);
 +
 +      status = titsc_readl(ts_dev, REG_RAWIRQSTATUS);
 +      if (status & IRQENB_PENUP) {
 +              /* Pen up event */
 +              fsm = titsc_readl(ts_dev, REG_ADCFSM);
 +              if (fsm == ADCFSM_STEPID) {
 +                      ts_dev->pen_down = false;
 +                      input_report_key(input_dev, BTN_TOUCH, 0);
 +                      input_report_abs(input_dev, ABS_PRESSURE, 0);
 +                      input_sync(input_dev);
 +              } else {
 +                      ts_dev->pen_down = true;
 +              }
 +              irqclr |= IRQENB_PENUP;
 +      }
 +
 +      titsc_writel(ts_dev, REG_IRQSTATUS, irqclr);
 +
 +      titsc_writel(ts_dev, REG_SE, STPENB_STEPENB_TC);
 +      return IRQ_HANDLED;
 +}
 +
 +/*
 + * The functions for inserting/removing driver as a module.
 + */
 +
- static int __devexit titsc_remove(struct platform_device *pdev)
++static int titsc_probe(struct platform_device *pdev)
 +{
 +      struct titsc *ts_dev;
 +      struct input_dev *input_dev;
 +      struct ti_tscadc_dev *tscadc_dev = pdev->dev.platform_data;
 +      struct mfd_tscadc_board *pdata;
 +      int err;
 +
 +      pdata = tscadc_dev->dev->platform_data;
 +
 +      if (!pdata) {
 +              dev_err(&pdev->dev, "Could not find platform data\n");
 +              return -EINVAL;
 +      }
 +
 +      /* Allocate memory for device */
 +      ts_dev = kzalloc(sizeof(struct titsc), GFP_KERNEL);
 +      input_dev = input_allocate_device();
 +      if (!ts_dev || !input_dev) {
 +              dev_err(&pdev->dev, "failed to allocate memory.\n");
 +              err = -ENOMEM;
 +              goto err_free_mem;
 +      }
 +
 +      tscadc_dev->tsc = ts_dev;
 +      ts_dev->mfd_tscadc = tscadc_dev;
 +      ts_dev->input = input_dev;
 +      ts_dev->irq = tscadc_dev->irq;
 +      ts_dev->wires = pdata->tsc_init->wires;
 +      ts_dev->x_plate_resistance = pdata->tsc_init->x_plate_resistance;
 +      ts_dev->steps_to_configure = pdata->tsc_init->steps_to_configure;
 +
 +      err = request_irq(ts_dev->irq, titsc_irq,
 +                        0, pdev->dev.driver->name, ts_dev);
 +      if (err) {
 +              dev_err(&pdev->dev, "failed to allocate irq.\n");
 +              goto err_free_mem;
 +      }
 +
 +      titsc_writel(ts_dev, REG_IRQENABLE, IRQENB_FIFO0THRES);
 +      titsc_step_config(ts_dev);
 +      titsc_writel(ts_dev, REG_FIFO0THR, ts_dev->steps_to_configure);
 +
 +      input_dev->name = "ti-tsc";
 +      input_dev->dev.parent = &pdev->dev;
 +
 +      input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
 +      input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
 +
 +      input_set_abs_params(input_dev, ABS_X, 0, MAX_12BIT, 0, 0);
 +      input_set_abs_params(input_dev, ABS_Y, 0, MAX_12BIT, 0, 0);
 +      input_set_abs_params(input_dev, ABS_PRESSURE, 0, MAX_12BIT, 0, 0);
 +
 +      /* register to the input system */
 +      err = input_register_device(input_dev);
 +      if (err)
 +              goto err_free_irq;
 +
 +      platform_set_drvdata(pdev, ts_dev);
 +      return 0;
 +
 +err_free_irq:
 +      free_irq(ts_dev->irq, ts_dev);
 +err_free_mem:
 +      input_free_device(input_dev);
 +      kfree(ts_dev);
 +      return err;
 +}
 +
-       .remove = __devexit_p(titsc_remove),
++static int titsc_remove(struct platform_device *pdev)
 +{
 +      struct ti_tscadc_dev *tscadc_dev = pdev->dev.platform_data;
 +      struct titsc *ts_dev = tscadc_dev->tsc;
 +
 +      free_irq(ts_dev->irq, ts_dev);
 +
 +      input_unregister_device(ts_dev->input);
 +
 +      platform_set_drvdata(pdev, NULL);
 +      kfree(ts_dev);
 +      return 0;
 +}
 +
 +#ifdef CONFIG_PM
 +static int titsc_suspend(struct device *dev)
 +{
 +      struct ti_tscadc_dev *tscadc_dev = dev->platform_data;
 +      struct titsc *ts_dev = tscadc_dev->tsc;
 +      unsigned int idle;
 +
 +      if (device_may_wakeup(tscadc_dev->dev)) {
 +              idle = titsc_readl(ts_dev, REG_IRQENABLE);
 +              titsc_writel(ts_dev, REG_IRQENABLE,
 +                              (idle | IRQENB_HW_PEN));
 +              titsc_writel(ts_dev, REG_IRQWAKEUP, IRQWKUP_ENB);
 +      }
 +      return 0;
 +}
 +
 +static int titsc_resume(struct device *dev)
 +{
 +      struct ti_tscadc_dev *tscadc_dev = dev->platform_data;
 +      struct titsc *ts_dev = tscadc_dev->tsc;
 +
 +      if (device_may_wakeup(tscadc_dev->dev)) {
 +              titsc_writel(ts_dev, REG_IRQWAKEUP,
 +                              0x00);
 +              titsc_writel(ts_dev, REG_IRQCLR, IRQENB_HW_PEN);
 +      }
 +      titsc_step_config(ts_dev);
 +      titsc_writel(ts_dev, REG_FIFO0THR,
 +                      ts_dev->steps_to_configure);
 +      return 0;
 +}
 +
 +static const struct dev_pm_ops titsc_pm_ops = {
 +      .suspend = titsc_suspend,
 +      .resume  = titsc_resume,
 +};
 +#define TITSC_PM_OPS (&titsc_pm_ops)
 +#else
 +#define TITSC_PM_OPS NULL
 +#endif
 +
 +static struct platform_driver ti_tsc_driver = {
 +      .probe  = titsc_probe,
++      .remove = titsc_remove,
 +      .driver = {
 +              .name   = "tsc",
 +              .owner  = THIS_MODULE,
 +              .pm     = TITSC_PM_OPS,
 +      },
 +};
 +module_platform_driver(ti_tsc_driver);
 +
 +MODULE_DESCRIPTION("TI touchscreen controller driver");
 +MODULE_AUTHOR("Rachna Patil <rachna@ti.com>");
 +MODULE_LICENSE("GPL");
Simple merge