--- /dev/null
+What: /sys/firmware/sgi_uv/
+Date: August 2008
+Contact: Russ Anderson <rja@sgi.com>
+Description:
+ The /sys/firmware/sgi_uv directory contains information
+ about the SGI UV platform.
+
+ Under that directory are a number of files:
+
+ partition_id
+ coherence_id
+
+ The partition_id entry contains the partition id.
+ SGI UV systems can be partitioned into multiple physical
+ machines, which each partition running a unique copy
+ of the operating system. Each partition will have a unique
+ partition id. To display the partition id, use the command:
+
+ cat /sys/firmware/sgi_uv/partition_id
+
+ The coherence_id entry contains the coherence id.
+ A partitioned SGI UV system can have one or more coherence
+ domain. The coherence id indicates which coherence domain
+ this partition is in. To display the coherence id, use the
+ command:
+
+ cat /sys/firmware/sgi_uv/coherence_id
*.css
*.dvi
*.eps
+*.fw.gen.S
+*.fw
*.gif
*.grep
*.grp
controlled by a kernel/module/sysfs/sysctl parameter.
Who: Krzysztof Piotr Oledzki <ole@ans.pl>
+---------------------------
+
+What: ide-scsi (BLK_DEV_IDESCSI)
+When: 2.6.29
+Why: The 2.6 kernel supports direct writing to ide CD drives, which
+ eliminates the need for ide-scsi. The new method is more
+ efficient in every way.
+Who: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
void (*kill_sb) (struct super_block *);
locking rules:
may block BKL
-get_sb yes yes
-kill_sb yes yes
+get_sb yes no
+kill_sb yes no
->get_sb() returns error or 0 with locked superblock attached to the vfsmount
(exclusive on ->s_umount).
unlocked_ioctl: no (see below)
compat_ioctl: no
mmap: no
-open: maybe (see below)
+open: no
flush: no
release: no
fsync: no (see below)
aio_fsync: no
-fasync: yes (see below)
+fasync: no
lock: yes
readv: no
writev: no
semaphore. Note some filesystems (i.e. remote ones) provide no
protection for i_size so you will need to use the BKL.
-->open() locking is in-transit: big lock partially moved into the methods.
-The only exception is ->open() in the instances of file_operations that never
-end up in ->i_fop/->proc_fops, i.e. ones that belong to character devices
-(chrdev_open() takes lock before replacing ->f_op and calling the secondary
-method. As soon as we fix the handling of module reference counters all
-instances of ->open() will be called without the BKL.
-
Note: ext2_release() was *the* source of contention on fs-intensive
loads and dropping BKL on ->release() helps to get rid of that (we still
grab BKL for cases when we close a file that had been opened r/w, but that
========
There is plenty of additional information on the linux-ntfs web site
-at http://linux-ntfs.sourceforge.net/
+at http://www.linux-ntfs.org/
The web site has a lot of additional information, such as a comprehensive
FAQ, documentation on the NTFS on-disk format, information on the Linux-NTFS
For Win2k and later dynamic disks, you can for example use the ldminfo utility
which is part of the Linux LDM tools (the latest version at the time of
writing is linux-ldm-0.0.8.tar.bz2). You can download it from:
- http://linux-ntfs.sourceforge.net/downloads.html
+ http://www.linux-ntfs.org/
Simply extract the downloaded archive (tar xvjf linux-ldm-0.0.8.tar.bz2), go
into it (cd linux-ldm-0.0.8) and change to the test directory (cd test). You
will find the precompiled (i386) ldminfo utility there. NOTE: You will not be
"smaps". When enabled, the contents of these files are visible only to
readers that are allowed to ptrace() the given process.
+msgmni
+------
+
+Maximum number of message queue ids on the system.
+This value scales to the amount of lowmem. It is automatically recomputed
+upon memory add/remove or ipc namespace creation/removal.
+When a value is written into this file, msgmni's value becomes fixed, i.e. it
+is not recomputed anymore when one of the above events occurs.
+Use auto_msgmni to change this behavior.
+
+auto_msgmni
+-----------
+
+Enables/Disables automatic recomputing of msgmni upon memory add/remove or
+upon ipc namespace creation/removal (see the msgmni description above).
+Echoing "1" into this file enables msgmni automatic recomputing.
+Echoing "0" turns it off.
+auto_msgmni default value is 1.
+
2.4 /proc/sys/vm - The virtual memory subsystem
-----------------------------------------------
- LCD brightness control
- Volume control
- Fan control and monitoring: fan speed, fan enable/disable
- - Experimental: WAN enable and disable
+ - WAN enable and disable
A compatibility table by model and feature is maintained on the web
site, http://ibm-acpi.sf.net/. I appreciate any success or failure
would be the safest choice, though).
-EXPERIMENTAL: WAN
------------------
+WAN
+---
procfs: /proc/acpi/ibm/wan
sysfs device attribute: wwan_enable (deprecated)
sysfs rfkill class: switch "tpacpi_wwan_sw"
-This feature is marked EXPERIMENTAL because the implementation
-directly accesses hardware registers and may not work as expected. USE
-WITH CAUTION! To use this feature, you need to supply the
-experimental=1 parameter when loading the module.
-
This feature shows the presence and current state of a W-WAN (Sierra
Wireless EV-DO) device.
2 -> Hauppauge HVR850 (au0828) [2040:7240]
3 -> DViCO FusionHDTV USB (au0828) [0fe9:d620]
4 -> Hauppauge HVR950Q rev xxF8 (au0828) [2040:7201,2040:7211,2040:7281]
+ 5 -> Hauppauge Woodbury (au0828) [2040:8200]
zc3xx 0471:0326 Philips SPC 300 NC
sonixj 0471:0327 Philips SPC 600 NC
sonixj 0471:0328 Philips SPC 700 NC
-zc3xx 0471:032d Philips spc210nc
-zc3xx 0471:032e Philips spc315nc
-sonixj 0471:0330 Philips SPC 710NC
+zc3xx 0471:032d Philips SPC 210 NC
+zc3xx 0471:032e Philips SPC 315 NC
+sonixj 0471:0330 Philips SPC 710 NC
spca501 0497:c001 Smile International
sunplus 04a5:3003 Benq DC 1300
sunplus 04a5:3008 Benq DC 1500
-sunplus 04a5:300a Benq DC3410
-spca500 04a5:300c Benq DC1016
+sunplus 04a5:300a Benq DC 3410
+spca500 04a5:300c Benq DC 1016
sunplus 04f1:1001 JVC GC A50
spca561 04fc:0561 Flexcam 100
sunplus 04fc:500c Sunplus CA500C
tv8532 0923:010f ICM532 cams
mars 093a:050f Mars-Semi Pc-Camera
pac207 093a:2460 PAC207 Qtec Webcam 100
-pac207 093a:2463 Philips spc200nc pac207
+pac207 093a:2463 Philips SPC 220 NC
pac207 093a:2464 Labtec Webcam 1200
pac207 093a:2468 PAC207
pac207 093a:2470 Genius GF112
-pac207 093a:2471 PAC207 Genius VideoCam ge111
-pac207 093a:2472 PAC207 Genius VideoCam ge110
+pac207 093a:2471 Genius VideoCam ge111
+pac207 093a:2472 Genius VideoCam ge110
pac7311 093a:2600 PAC7311 Typhoon
-pac7311 093a:2601 PAC7311 Phillips SPC610NC
+pac7311 093a:2601 Philips SPC 610 NC
pac7311 093a:2603 PAC7312
-pac7311 093a:2608 PAC7311 Trust WB-3300p
-pac7311 093a:260e PAC7311 Gigaware VGA PC Camera, Trust WB-3350p, SIGMA cam 2350
-pac7311 093a:260f PAC7311 SnakeCam
+pac7311 093a:2608 Trust WB-3300p
+pac7311 093a:260e Gigaware VGA PC Camera, Trust WB-3350p, SIGMA cam 2350
+pac7311 093a:260f SnakeCam
pac7311 093a:2621 PAC731x
+pac7311 093a:2624 PAC7302
+pac7311 093a:2626 Labtec 2200
zc3xx 0ac8:0302 Z-star Vimicro zc0302
vc032x 0ac8:0321 Vimicro generic vc0321
vc032x 0ac8:0323 Vimicro Vc0323
sonixj 0c45:60ec SN9C105+MO4000
sonixj 0c45:60fb Surfer NoName
sonixj 0c45:60fc LG-LIC300
+sonixj 0c45:6128 Microdia/Sonix SNP325
sonixj 0c45:612a Avant Camera
sonixj 0c45:612c Typhoon Rasy Cam 1.3MPix
sonixj 0c45:6130 Sonix Pccam
spca561 10fd:7e50 FlyCam Usb 100
zc3xx 10fd:8050 Typhoon Webshot II USB 300k
spca501 1776:501c Arowana 300K CMOS Camera
-t613 17a1:0128 T613/TAS5130A
+t613 17a1:0128 TASCORP JPEG Webcam, NGS Cyclops
vc032x 17ef:4802 Lenovo Vc0323+MI1310_SOC
pac207 2001:f115 D-Link DSB-C120
spca500 2899:012c Toptro Industrial
S: Maintained
ACPI
-P: Andi Kleen
-M: ak@linux.intel.com
+P: Len Brown
M: lenb@kernel.org
L: linux-acpi@vger.kernel.org
W: http://www.lesswatts.org/projects/acpi/
W: http://www.canb.auug.org.au/~sfr/
S: Supported
+APPLE BCM5974 MULTITOUCH DRIVER
+P: Henrik Rydberg
+M: rydberg@euromail.se
+L: linux-input@vger.kernel.org
+S: Maintained
+
APPLE SMC DRIVER
P: Nicolas Boichat
M: nicolas@boichat.ch
M: syrjala@sci.fi
S: Maintained
-ATL1 ETHERNET DRIVER
+ATLX ETHERNET DRIVERS
P: Jay Cliburn
M: jcliburn@gmail.com
P: Chris Snook
M: csnook@redhat.com
+P: Jie Yang
+M: jie.yang@atheros.com
L: atl1-devel@lists.sourceforge.net
W: http://sourceforge.net/projects/atl1
W: http://atl1.sourceforge.net
EMBEDDED LINUX
P: Paul Gortmaker
M: paul.gortmaker@windriver.com
-P David Woodhouse
+P: David Woodhouse
M: dwmw2@infradead.org
L: linux-embedded@vger.kernel.org
S: Maintained
M: aia21@cantab.net
L: linux-ntfs-dev@lists.sourceforge.net
L: linux-kernel@vger.kernel.org
-W: http://linux-ntfs.sf.net/
+W: http://www.linux-ntfs.org/
T: git kernel.org:/pub/scm/linux/kernel/git/aia21/ntfs-2.6.git
S: Maintained
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 27
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc6
NAME = Rotary Wombat
# *DOCUMENTATION*
#include <linux/compiler.h>
#include <asm/types.h>
-#ifdef __ARMEB__
-# define __BIG_ENDIAN
-#else
-# define __LITTLE_ENDIAN
-#endif
-
-#define __SWAB_64_THRU_32__
-
-static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
+static inline __attribute_const__ __u32 ___arch__swab32(__u32 x)
{
__u32 t;
return x;
}
-#define __arch_swab32 __arch_swab32
-#include <linux/byteorder.h>
+#define __arch__swab32(x) ___arch__swab32(x)
+
+#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+# define __BYTEORDER_HAS_U64__
+# define __SWAB_64_THRU_32__
+#endif
+
+#ifdef __ARMEB__
+#include <linux/byteorder/big_endian.h>
+#else
+#include <linux/byteorder/little_endian.h>
+#endif
#endif
+
#define MT_DEVICE_NONSHARED 1
#define MT_DEVICE_CACHED 2
#define MT_DEVICE_IXP2000 3
+#define MT_DEVICE_WC 4
/*
- * types 4 onwards can be found in asm/mach/map.h and are undefined
+ * types 5 onwards can be found in asm/mach/map.h and are undefined
* for ioremap
*/
#define ioremap(cookie,size) __arm_ioremap(cookie, size, MT_DEVICE)
#define ioremap_nocache(cookie,size) __arm_ioremap(cookie, size, MT_DEVICE)
#define ioremap_cached(cookie,size) __arm_ioremap(cookie, size, MT_DEVICE_CACHED)
+#define ioremap_wc(cookie,size) __arm_ioremap(cookie, size, MT_DEVICE_WC)
#define iounmap(cookie) __iounmap(cookie)
#else
#define ioremap(cookie,size) __arch_ioremap((cookie), (size), MT_DEVICE)
#define ioremap_nocache(cookie,size) __arch_ioremap((cookie), (size), MT_DEVICE)
#define ioremap_cached(cookie,size) __arch_ioremap((cookie), (size), MT_DEVICE_CACHED)
+#define ioremap_wc(cookie,size) __arch_ioremap((cookie), (size), MT_DEVICE_WC)
#define iounmap(cookie) __arch_iounmap(cookie)
#endif
unsigned int type;
};
-/* types 0-3 are defined in asm/io.h */
-#define MT_CACHECLEAN 4
-#define MT_MINICLEAN 5
-#define MT_LOW_VECTORS 6
-#define MT_HIGH_VECTORS 7
-#define MT_MEMORY 8
-#define MT_ROM 9
+/* types 0-4 are defined in asm/io.h */
+#define MT_CACHECLEAN 5
+#define MT_MINICLEAN 6
+#define MT_LOW_VECTORS 7
+#define MT_HIGH_VECTORS 8
+#define MT_MEMORY 9
+#define MT_ROM 10
#define MT_NONSHARED_DEVICE MT_DEVICE_NONSHARED
#define MT_IXP2000_DEVICE MT_DEVICE_IXP2000
#ifdef CONFIG_ARCH_OMAP730
static struct omap_mcbsp_platform_data omap730_mcbsp_pdata[] = {
{
+ .phys_base = OMAP730_MCBSP1_BASE,
.virt_base = io_p2v(OMAP730_MCBSP1_BASE),
.dma_rx_sync = OMAP_DMA_MCBSP1_RX,
.dma_tx_sync = OMAP_DMA_MCBSP1_TX,
.ops = &omap1_mcbsp_ops,
},
{
+ .phys_base = OMAP730_MCBSP2_BASE,
.virt_base = io_p2v(OMAP730_MCBSP2_BASE),
.dma_rx_sync = OMAP_DMA_MCBSP3_RX,
.dma_tx_sync = OMAP_DMA_MCBSP3_TX,
#ifdef CONFIG_ARCH_OMAP15XX
static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = {
{
+ .phys_base = OMAP1510_MCBSP1_BASE,
.virt_base = OMAP1510_MCBSP1_BASE,
.dma_rx_sync = OMAP_DMA_MCBSP1_RX,
.dma_tx_sync = OMAP_DMA_MCBSP1_TX,
.clk_name = "mcbsp_clk",
},
{
+ .phys_base = OMAP1510_MCBSP2_BASE,
.virt_base = io_p2v(OMAP1510_MCBSP2_BASE),
.dma_rx_sync = OMAP_DMA_MCBSP2_RX,
.dma_tx_sync = OMAP_DMA_MCBSP2_TX,
.ops = &omap1_mcbsp_ops,
},
{
+ .phys_base = OMAP1510_MCBSP3_BASE,
.virt_base = OMAP1510_MCBSP3_BASE,
.dma_rx_sync = OMAP_DMA_MCBSP3_RX,
.dma_tx_sync = OMAP_DMA_MCBSP3_TX,
#ifdef CONFIG_ARCH_OMAP16XX
static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
{
+ .phys_base = OMAP1610_MCBSP1_BASE,
.virt_base = OMAP1610_MCBSP1_BASE,
.dma_rx_sync = OMAP_DMA_MCBSP1_RX,
.dma_tx_sync = OMAP_DMA_MCBSP1_TX,
.clk_name = "mcbsp_clk",
},
{
+ .phys_base = OMAP1610_MCBSP2_BASE,
.virt_base = io_p2v(OMAP1610_MCBSP2_BASE),
.dma_rx_sync = OMAP_DMA_MCBSP2_RX,
.dma_tx_sync = OMAP_DMA_MCBSP2_TX,
.ops = &omap1_mcbsp_ops,
},
{
+ .phys_base = OMAP1610_MCBSP3_BASE,
.virt_base = OMAP1610_MCBSP3_BASE,
.dma_rx_sync = OMAP_DMA_MCBSP3_RX,
.dma_tx_sync = OMAP_DMA_MCBSP3_TX,
#ifdef CONFIG_ARCH_OMAP24XX
static struct omap_mcbsp_platform_data omap24xx_mcbsp_pdata[] = {
{
+ .phys_base = OMAP24XX_MCBSP1_BASE,
.virt_base = IO_ADDRESS(OMAP24XX_MCBSP1_BASE),
.dma_rx_sync = OMAP24XX_DMA_MCBSP1_RX,
.dma_tx_sync = OMAP24XX_DMA_MCBSP1_TX,
.clk_name = "mcbsp_clk",
},
{
+ .phys_base = OMAP24XX_MCBSP2_BASE,
.virt_base = IO_ADDRESS(OMAP24XX_MCBSP2_BASE),
.dma_rx_sync = OMAP24XX_DMA_MCBSP2_RX,
.dma_tx_sync = OMAP24XX_DMA_MCBSP2_TX,
#ifdef CONFIG_ARCH_OMAP34XX
static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
{
+ .phys_base = OMAP34XX_MCBSP1_BASE,
.virt_base = IO_ADDRESS(OMAP34XX_MCBSP1_BASE),
.dma_rx_sync = OMAP24XX_DMA_MCBSP1_RX,
.dma_tx_sync = OMAP24XX_DMA_MCBSP1_TX,
.clk_name = "mcbsp_clk",
},
{
+ .phys_base = OMAP34XX_MCBSP2_BASE,
.virt_base = IO_ADDRESS(OMAP34XX_MCBSP2_BASE),
.dma_rx_sync = OMAP24XX_DMA_MCBSP2_RX,
.dma_tx_sync = OMAP24XX_DMA_MCBSP2_TX,
PMD_SECT_TEX(1),
.domain = DOMAIN_IO,
},
+ [MT_DEVICE_WC] = { /* ioremap_wc */
+ .prot_pte = PROT_PTE_DEVICE,
+ .prot_l1 = PMD_TYPE_TABLE,
+ .prot_sect = PROT_SECT_DEVICE,
+ .domain = DOMAIN_IO,
+ },
[MT_CACHECLEAN] = {
.prot_sect = PMD_TYPE_SECT | PMD_SECT_XN,
.domain = DOMAIN_KERNEL,
ecc_mask = 0;
}
+ /*
+ * On non-Xscale3 ARMv5-and-older systems, use CB=01
+ * (Uncached/Buffered) for ioremap_wc() mappings. On XScale3
+ * and ARMv6+, use TEXCB=00100 mappings (Inner/Outer Uncacheable
+ * in xsc3 parlance, Uncached Normal in ARMv6 parlance).
+ */
+ if (cpu_is_xsc3() || cpu_arch >= CPU_ARCH_ARMv6) {
+ mem_types[MT_DEVICE_WC].prot_pte_ext |= PTE_EXT_TEX(1);
+ mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_TEX(1);
+ } else {
+ mem_types[MT_DEVICE_WC].prot_pte |= L_PTE_BUFFERABLE;
+ mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_BUFFERABLE;
+ }
+
/*
* ARMv5 and lower, bit 4 must be set for page tables.
* (was: cache "update-able on write" bit on ARM610)
#include <linux/proc_fs.h>
#include <linux/semaphore.h>
#include <linux/string.h>
-#include <linux/version.h>
#include <mach/clock.h>
bank->chip.set = gpio_set;
if (bank_is_mpuio(bank)) {
bank->chip.label = "mpuio";
-#ifdef CONFIG_ARCH_OMAP1
+#ifdef CONFIG_ARCH_OMAP16XX
bank->chip.dev = &omap_mpuio_device.dev;
#endif
bank->chip.base = OMAP_MPUIO(0);
};
struct omap_mcbsp_platform_data {
+ unsigned long phys_base;
u32 virt_base;
u8 dma_rx_sync, dma_tx_sync;
u16 rx_irq, tx_irq;
struct omap_mcbsp {
struct device *dev;
+ unsigned long phys_base;
u32 io_base;
u8 id;
u8 free;
omap_set_dma_dest_params(mcbsp[id].dma_tx_lch,
src_port,
OMAP_DMA_AMODE_CONSTANT,
- mcbsp[id].io_base + OMAP_MCBSP_REG_DXR1,
+ mcbsp[id].phys_base + OMAP_MCBSP_REG_DXR1,
0, 0);
omap_set_dma_src_params(mcbsp[id].dma_tx_lch,
omap_set_dma_src_params(mcbsp[id].dma_rx_lch,
src_port,
OMAP_DMA_AMODE_CONSTANT,
- mcbsp[id].io_base + OMAP_MCBSP_REG_DRR1,
+ mcbsp[id].phys_base + OMAP_MCBSP_REG_DRR1,
0, 0);
omap_set_dma_dest_params(mcbsp[id].dma_rx_lch,
mcbsp[id].dma_tx_lch = -1;
mcbsp[id].dma_rx_lch = -1;
+ mcbsp[id].phys_base = pdata->phys_base;
mcbsp[id].io_base = pdata->virt_base;
/* Default I/O is IRQ based */
mcbsp[id].io_type = OMAP_MCBSP_IRQ_IO;
* to extract and format the required data.
*/
+#include <linux/mm.h>
+#include <linux/sched.h>
#include <linux/thread_info.h>
#include <linux/kbuild.h>
OFFSET(TI_rar_saved, thread_info, rar_saved);
OFFSET(TI_rsr_saved, thread_info, rsr_saved);
OFFSET(TI_restart_block, thread_info, restart_block);
+ BLANK();
+ OFFSET(TSK_active_mm, task_struct, active_mm);
+ BLANK();
+ OFFSET(MM_pgd, mm_struct, pgd);
}
/* Low-level exception handlers */
handle_critical:
+ /*
+ * AT32AP700x errata:
+ *
+ * After a Java stack overflow or underflow trap, any CPU
+ * memory access may cause erratic behavior. This will happen
+ * when the four least significant bits of the JOSP system
+ * register contains any value between 9 and 15 (inclusive).
+ *
+ * Possible workarounds:
+ * - Don't use the Java Extension Module
+ * - Ensure that the stack overflow and underflow trap
+ * handlers do not do any memory access or trigger any
+ * exceptions before the overflow/underflow condition is
+ * cleared (by incrementing or decrementing the JOSP)
+ * - Make sure that JOSP does not contain any problematic
+ * value before doing any exception or interrupt
+ * processing.
+ * - Set up a critical exception handler which writes a
+ * known-to-be-safe value, e.g. 4, to JOSP before doing
+ * any further processing.
+ *
+ * We'll use the last workaround for now since we cannot
+ * guarantee that user space processes don't use Java mode.
+ * Non-well-behaving userland will be terminated with extreme
+ * prejudice.
+ */
+#ifdef CONFIG_CPU_AT32AP700X
+ /*
+ * There's a chance we can't touch memory, so temporarily
+ * borrow PTBR to save the stack pointer while we fix things
+ * up...
+ */
+ mtsr SYSREG_PTBR, sp
+ mov sp, 4
+ mtsr SYSREG_JOSP, sp
+ mfsr sp, SYSREG_PTBR
+ sub pc, -2
+
+ /* Push most of pt_regs on stack. We'll do the rest later */
sub sp, 4
- stmts --sp, r0-lr
- rcall save_full_context_ex
+ pushm r0-r12
+
+ /* PTBR mirrors current_thread_info()->task->active_mm->pgd */
+ get_thread_info r0
+ ld.w r1, r0[TI_task]
+ ld.w r2, r1[TSK_active_mm]
+ ld.w r3, r2[MM_pgd]
+ mtsr SYSREG_PTBR, r3
+#else
+ sub sp, 4
+ pushm r0-r12
+#endif
+ sub r0, sp, -(14 * 4)
+ mov r1, lr
+ mfsr r2, SYSREG_RAR_EX
+ mfsr r3, SYSREG_RSR_EX
+ pushm r0-r3
+
mfsr r12, SYSREG_ECR
mov r11, sp
rcall do_critical_exception
mov r11, SDRAMC_LPR_LPCB_SELF_RFR
bfins r10, r11, 0, 2 /* LPCB <- self Refresh */
sync 0 /* flush write buffer */
- st.w r12[SDRAMC_LPR], r11 /* put SDRAM in self-refresh mode */
+ st.w r12[SDRAMC_LPR], r10 /* put SDRAM in self-refresh mode */
ld.w r11, r12[SDRAMC_LPR]
unmask_interrupts
sleep CPU_SLEEP_FROZEN
} \
} while (0)
+/*
+ * format for entries in the Global Offset Table
+ */
+struct got_entry {
+ uint64_t val;
+};
+
+/*
+ * Layout of the Function Descriptor
+ */
+struct fdesc {
+ uint64_t ip;
+ uint64_t gp;
+};
+
#endif /* _ASM_IA64_ELF_H */
* David Mosberger-Tang <davidm@hpl.hp.com>
*/
+#include <linux/elf.h>
+#include <linux/uaccess.h>
#include <asm-generic/sections.h>
extern char __per_cpu_start[], __per_cpu_end[], __phys_per_cpu_start[];
extern char __start_unwind[], __end_unwind[];
extern char __start_ivt_text[], __end_ivt_text[];
+#undef dereference_function_descriptor
+static inline void *dereference_function_descriptor(void *ptr)
+{
+ struct fdesc *desc = ptr;
+ void *p;
+
+ if (!probe_kernel_address(&desc->ip, p))
+ ptr = p;
+ return ptr;
+}
+
+
#endif /* _ASM_IA64_SECTIONS_H */
* until the transfer is complete. In order to get the asynch
* version of bte_copy, you must perform this check yourself.
*/
-#define BTE_UNALIGNED_COPY(src, dest, len, mode) \
- (((len & L1_CACHE_MASK) || (src & L1_CACHE_MASK) || \
- (dest & L1_CACHE_MASK)) ? \
- bte_unaligned_copy(src, dest, len, mode) : \
+#define BTE_UNALIGNED_COPY(src, dest, len, mode) \
+ (((len & (L1_CACHE_BYTES - 1)) || \
+ (src & (L1_CACHE_BYTES - 1)) || \
+ (dest & (L1_CACHE_BYTES - 1))) ? \
+ bte_unaligned_copy(src, dest, len, mode) : \
bte_copy(src, dest, len, mode, NULL))
#undef N
-struct got_entry {
- uint64_t val;
-};
-
-struct fdesc {
- uint64_t ip;
- uint64_t gp;
-};
-
/* Opaque struct for insns, to protect against derefs. */
struct insn;
return -EBUSY;
}
- cpu_clear(cpu, cpu_online_map);
-
if (migrate_platform_irqs(cpu)) {
cpu_set(cpu, cpu_online_map);
return (-EBUSY);
}
remove_siblinginfo(cpu);
- cpu_clear(cpu, cpu_online_map);
fixup_irqs();
+ cpu_clear(cpu, cpu_online_map);
local_flush_tlb_all();
cpu_clear(cpu, cpu_callin_map);
return 0;
entry = find_next_zero_bit(map, mapsize, last_entry);
}
- if (entry > mapsize)
+ if (entry > mapsize) {
+ kfree(ca_dmamap);
goto map_return;
+ }
for (i = 0; i < entries; i++)
set_bit(entry + i, map);
do {
/* reset IKBD ACIA */
acia.key_ctrl = ACIA_RESET |
- (atari_switches & ATARI_SWITCH_IKBD) ? ACIA_RHTID : 0;
+ ((atari_switches & ATARI_SWITCH_IKBD) ?
+ ACIA_RHTID : 0);
(void)acia.key_ctrl;
(void)acia.key_data;
/* reset MIDI ACIA */
acia.mid_ctrl = ACIA_RESET |
- (atari_switches & ATARI_SWITCH_MIDI) ? ACIA_RHTID : 0;
+ ((atari_switches & ATARI_SWITCH_MIDI) ?
+ ACIA_RHTID : 0);
(void)acia.mid_ctrl;
(void)acia.mid_data;
ACIA_RHTID : ACIA_RLTID);
acia.mid_ctrl = ACIA_DIV16 | ACIA_D8N1S |
- (atari_switches & ATARI_SWITCH_MIDI) ? ACIA_RHTID : 0;
+ ((atari_switches & ATARI_SWITCH_MIDI) ?
+ ACIA_RHTID : 0);
/* make sure the interrupt line is up */
} while ((mfp.par_dt_reg & 0x10) == 0);
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:00 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_ZONE_DMA=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_ZORRO_NAMES=y
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDEDOUBLER=y
CONFIG_BLK_DEV_BUDDHA=y
# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
CONFIG_GVP11_SCSI=y
CONFIG_SCSI_A4000T=y
CONFIG_SCSI_ZORRO7XX=y
+# CONFIG_SCSI_DH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
CONFIG_SOUND=m
CONFIG_DMASOUND_PAULA=m
CONFIG_DMASOUND=m
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
-CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
#
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:01 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_PROC_HARDWARE=y
CONFIG_ZONE_DMA=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
-CONFIG_APOLLO_ELPLUS=y
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
CONFIG_LOGO_LINUX_MONO=y
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
#
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:02 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_PROC_HARDWARE=y
CONFIG_ZONE_DMA=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_FALCON_IDE=y
# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
CONFIG_ATARI_SCSI=y
# CONFIG_ATARI_SCSI_TOSHIBA_DELAY is not set
# CONFIG_ATARI_SCSI_RESET_BOOT is not set
+# CONFIG_SCSI_DH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
CONFIG_SOUND=m
CONFIG_DMASOUND_ATARI=m
CONFIG_DMASOUND=m
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# Character devices
#
CONFIG_ATARI_MFPSER=m
-CONFIG_ATARI_SCC=y
-CONFIG_ATARI_SCC_DMA=y
CONFIG_ATARI_MIDI=m
CONFIG_ATARI_DSP56K=m
-# CONFIG_SERIAL_CONSOLE is not set
#
# File systems
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4DEV_FS=y
+# CONFIG_EXT4DEV_FS_XATTR is not set
CONFIG_JBD=y
+CONFIG_JBD2=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
-CONFIG_SUNRPC_BIND34=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
#
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:03 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_PROC_HARDWARE=y
CONFIG_ZONE_DMA=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_53C700_BE_BUS=y
# CONFIG_SCSI_DEBUG is not set
CONFIG_BVME6000_SCSI=y
+# CONFIG_SCSI_DH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
#
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=m
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:04 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_PROC_HARDWARE=y
CONFIG_ZONE_DMA=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
#
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:06 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_PROC_HARDWARE=y
CONFIG_ZONE_DMA=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_MAC_IDE=y
# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
# CONFIG_SCSI_DEBUG is not set
CONFIG_MAC_SCSI=y
CONFIG_SCSI_MAC_ESP=y
+# CONFIG_SCSI_DH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_INPUT_ADBHID=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_LOGO_MAC_CLUT224=y
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
-CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
#
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:07 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_ZONE_DMA=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_ZORRO_NAMES=y
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_MAC_IDE=y
CONFIG_BLK_DEV_Q40IDE=y
# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
CONFIG_MVME16x_SCSI=y
CONFIG_BVME6000_SCSI=y
CONFIG_SUN3X_ESP=y
+# CONFIG_SCSI_DH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_INPUT_ADBHID=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
CONFIG_HYDRA=m
CONFIG_ZORRO8390=m
CONFIG_APNE=m
-CONFIG_APOLLO_ELPLUS=y
CONFIG_MAC8390=y
CONFIG_MAC89x0=m
CONFIG_MACSONIC=m
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_LOGO_MAC_CLUT224=y
-
-#
-# Sound
-#
CONFIG_SOUND=m
CONFIG_DMASOUND_ATARI=m
CONFIG_DMASOUND_PAULA=m
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# Character devices
#
CONFIG_ATARI_MFPSER=m
-CONFIG_ATARI_SCC=y
-CONFIG_ATARI_SCC_DMA=y
CONFIG_ATARI_MIDI=m
CONFIG_ATARI_DSP56K=m
CONFIG_AMIGA_BUILTIN_SERIAL=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4DEV_FS=y
+# CONFIG_EXT4DEV_FS_XATTR is not set
CONFIG_JBD=y
+CONFIG_JBD2=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
#
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:08 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_PROC_HARDWARE=y
CONFIG_ZONE_DMA=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_ISCSI_TCP=m
# CONFIG_SCSI_DEBUG is not set
CONFIG_MVME147_SCSI=y
+# CONFIG_SCSI_DH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
#
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:09 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_PROC_HARDWARE=y
CONFIG_ZONE_DMA=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_53C700_BE_BUS=y
# CONFIG_SCSI_DEBUG is not set
CONFIG_MVME16x_SCSI=y
+# CONFIG_SCSI_DH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
#
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:10 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_GENERIC_ISA_DMA=y
CONFIG_ZONE_DMA=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_Q40IDE=y
# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
CONFIG_SOUND=m
CONFIG_DMASOUND_Q40=m
CONFIG_DMASOUND=m
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
#
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:11 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_PROC_HARDWARE=y
CONFIG_ZONE_DMA=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_ISCSI_TCP=m
# CONFIG_SCSI_DEBUG is not set
CONFIG_SUN3_SCSI=y
+# CONFIG_SCSI_DH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
#
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:12 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_PROC_HARDWARE=y
CONFIG_ZONE_DMA=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_ISCSI_TCP=m
# CONFIG_SCSI_DEBUG is not set
CONFIG_SUN3X_ESP=y
+# CONFIG_SCSI_DH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
#
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
source "init/Kconfig"
+config PROBE_INITRD_HEADER
+ bool "Probe initrd header created by addinitrd"
+ depends on BLK_DEV_INITRD
+ help
+ Probe initrd header at the last page of kernel image.
+ Say Y here if you are using arch/mips/boot/addinitrd.c to
+ add initrd or initramfs image to the kernel image.
+ Otherwise, say N.
+
menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)"
config HW_HAS_EISA
static unsigned long __init init_initrd(void)
{
unsigned long end;
- u32 *initrd_header;
/*
* Board specific code or command line parser should have
* already set up initrd_start and initrd_end. In these cases
* perfom sanity checks and use them if all looks good.
*/
- if (initrd_start && initrd_end > initrd_start)
- goto sanitize;
+ if (!initrd_start || initrd_end <= initrd_start) {
+#ifdef CONFIG_PROBE_INITRD_HEADER
+ u32 *initrd_header;
- /*
- * See if initrd has been added to the kernel image by
- * arch/mips/boot/addinitrd.c. In that case a header is
- * prepended to initrd and is made up by 8 bytes. The fisrt
- * word is a magic number and the second one is the size of
- * initrd. Initrd start must be page aligned in any cases.
- */
- initrd_header = __va(PAGE_ALIGN(__pa_symbol(&_end) + 8)) - 8;
- if (initrd_header[0] != 0x494E5244)
+ /*
+ * See if initrd has been added to the kernel image by
+ * arch/mips/boot/addinitrd.c. In that case a header is
+ * prepended to initrd and is made up by 8 bytes. The first
+ * word is a magic number and the second one is the size of
+ * initrd. Initrd start must be page aligned in any cases.
+ */
+ initrd_header = __va(PAGE_ALIGN(__pa_symbol(&_end) + 8)) - 8;
+ if (initrd_header[0] != 0x494E5244)
+ goto disable;
+ initrd_start = (unsigned long)(initrd_header + 2);
+ initrd_end = initrd_start + initrd_header[1];
+#else
goto disable;
- initrd_start = (unsigned long)(initrd_header + 2);
- initrd_end = initrd_start + initrd_header[1];
+#endif
+ }
-sanitize:
if (initrd_start & ~PAGE_MASK) {
pr_err("initrd start must be page aligned\n");
goto disable;
do_exit(SIGSEGV);
}
-extern const struct exception_table_entry __start___dbe_table[];
-extern const struct exception_table_entry __stop___dbe_table[];
+extern struct exception_table_entry __start___dbe_table[];
+extern struct exception_table_entry __stop___dbe_table[];
__asm__(
" .section __dbe_table, \"a\"\n"
if (n == 0 && cpu_has_divec) {
*(u32 *)(ebase + 0x200) = 0x08000000 |
(0x03ffffff & (handler >> 2));
- flush_icache_range(ebase + 0x200, ebase + 0x204);
+ local_flush_icache_range(ebase + 0x200, ebase + 0x204);
}
return (void *)old_handler;
}
*w = (*w & 0xffff0000) | (((u32)handler >> 16) & 0xffff);
w = (u32 *)(b + ori_offset);
*w = (*w & 0xffff0000) | ((u32)handler & 0xffff);
- flush_icache_range((unsigned long)b, (unsigned long)(b+handler_len));
+ local_flush_icache_range((unsigned long)b,
+ (unsigned long)(b+handler_len));
}
else {
/*
w = (u32 *)b;
*w++ = 0x08000000 | (((u32)handler >> 2) & 0x03fffff); /* j handler */
*w = 0;
- flush_icache_range((unsigned long)b, (unsigned long)(b+8));
+ local_flush_icache_range((unsigned long)b,
+ (unsigned long)(b+8));
}
return (void *)old_handler;
void __init set_handler(unsigned long offset, void *addr, unsigned long size)
{
memcpy((void *)(ebase + offset), addr, size);
- flush_icache_range(ebase + offset, ebase + offset + size);
+ local_flush_icache_range(ebase + offset, ebase + offset + size);
}
static char panic_null_cerr[] __cpuinitdata =
signal32_init();
#endif
- flush_icache_range(ebase, ebase + 0x400);
+ local_flush_icache_range(ebase, ebase + 0x400);
flush_tlb_handlers();
+
+ sort_extable(__start___dbe_table, __stop___dbe_table);
}
flush_cache_range = r3k_flush_cache_range;
flush_cache_page = r3k_flush_cache_page;
flush_icache_range = r3k_flush_icache_range;
+ local_flush_icache_range = r3k_flush_icache_range;
flush_cache_sigtramp = r3k_flush_cache_sigtramp;
local_flush_data_cache_page = local_r3k_flush_data_cache_page;
unsigned long end;
};
-static inline void local_r4k_flush_icache_range(void *args)
+static inline void local_r4k_flush_icache_range(unsigned long start, unsigned long end)
{
- struct flush_icache_range_args *fir_args = args;
- unsigned long start = fir_args->start;
- unsigned long end = fir_args->end;
-
if (!cpu_has_ic_fills_f_dc) {
if (end - start >= dcache_size) {
r4k_blast_dcache();
protected_blast_icache_range(start, end);
}
+static inline void local_r4k_flush_icache_range_ipi(void *args)
+{
+ struct flush_icache_range_args *fir_args = args;
+ unsigned long start = fir_args->start;
+ unsigned long end = fir_args->end;
+
+ local_r4k_flush_icache_range(start, end);
+}
+
static void r4k_flush_icache_range(unsigned long start, unsigned long end)
{
struct flush_icache_range_args args;
args.start = start;
args.end = end;
- r4k_on_each_cpu(local_r4k_flush_icache_range, &args, 1);
+ r4k_on_each_cpu(local_r4k_flush_icache_range_ipi, &args, 1);
instruction_hazard();
}
local_flush_data_cache_page = local_r4k_flush_data_cache_page;
flush_data_cache_page = r4k_flush_data_cache_page;
flush_icache_range = r4k_flush_icache_range;
+ local_flush_icache_range = local_r4k_flush_icache_range;
#if defined(CONFIG_DMA_NONCOHERENT)
if (coherentio) {
flush_cache_range = (void *) tx39h_flush_icache_all;
flush_cache_page = (void *) tx39h_flush_icache_all;
flush_icache_range = (void *) tx39h_flush_icache_all;
+ local_flush_icache_range = (void *) tx39h_flush_icache_all;
flush_cache_sigtramp = (void *) tx39h_flush_icache_all;
local_flush_data_cache_page = (void *) tx39h_flush_icache_all;
flush_cache_range = tx39_flush_cache_range;
flush_cache_page = tx39_flush_cache_page;
flush_icache_range = tx39_flush_icache_range;
+ local_flush_icache_range = tx39_flush_icache_range;
flush_cache_sigtramp = tx39_flush_cache_sigtramp;
local_flush_data_cache_page = local_tx39_flush_data_cache_page;
void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page,
unsigned long pfn);
void (*flush_icache_range)(unsigned long start, unsigned long end);
+void (*local_flush_icache_range)(unsigned long start, unsigned long end);
void (*__flush_cache_vmap)(void);
void (*__flush_cache_vunmap)(void);
void __cpuinit flush_tlb_handlers(void)
{
- flush_icache_range((unsigned long)handle_tlbl,
+ local_flush_icache_range((unsigned long)handle_tlbl,
(unsigned long)handle_tlbl + sizeof(handle_tlbl));
- flush_icache_range((unsigned long)handle_tlbs,
+ local_flush_icache_range((unsigned long)handle_tlbs,
(unsigned long)handle_tlbs + sizeof(handle_tlbs));
- flush_icache_range((unsigned long)handle_tlbm,
+ local_flush_icache_range((unsigned long)handle_tlbm,
(unsigned long)handle_tlbm + sizeof(handle_tlbm));
}
return res;
/* Second HPC is missing? */
- if (!ip22_is_fullhouse() ||
+ if (ip22_is_fullhouse() ||
get_dbe(tmp, (unsigned int *)&hpc3c1->pbdma[1]))
return 0;
txx9_ce_res[i].name = txx9_ce_res_name[i];
}
+ txx9_pcode = pcode;
sprintf(txx9_pcode_str, "TX%x", pcode);
if (base) {
txx9_reg_res.start = base & 0xfffffffffULL;
buf->count -= reclen;
return 0;
Efault:
- buffer->error = -EFAULT;
+ buf->error = -EFAULT;
return -EFAULT;
}
#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/bug.h>
+#include <linux/uaccess.h>
+#include <asm/sections.h>
#include <asm/unwind.h>
#if 0
deregister_unwind_table(mod);
module_bug_cleanup(mod);
}
+
+#ifdef CONFIG_64BIT
+void *dereference_function_descriptor(void *ptr)
+{
+ Elf64_Fdesc *desc = ptr;
+ void *p;
+
+ if (!probe_kernel_address(&desc->addr, p))
+ ptr = p;
+ return ptr;
+}
+#endif
KBUILD_CFLAGS += -mcpu=powerpc
endif
+# Work around a gcc code-gen bug with -fno-omit-frame-pointer.
+ifeq ($(CONFIG_FTRACE),y)
+KBUILD_CFLAGS += -mno-sched-epilog
+endif
+
cpu-as-$(CONFIG_4xx) += -Wa,-m405
cpu-as-$(CONFIG_6xx) += -Wa,-maltivec
cpu-as-$(CONFIG_POWER4) += -Wa,-maltivec
zlibheader := inffast.h inffixed.h inflate.h inftrees.h infutil.h
zliblinuxheader := zlib.h zconf.h zutil.h
-$(addprefix $(obj)/,$(zlib) gunzip_util.o main.o): \
+$(addprefix $(obj)/,$(zlib) cuboot-c2k.o gunzip_util.o main.o prpmc2800.o): \
$(addprefix $(obj)/,$(zliblinuxheader)) $(addprefix $(obj)/,$(zlibheader))
src-libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c
#define __S110 PAGE_SHARED_X
#define __S111 PAGE_SHARED_X
-#ifdef CONFIG_HUGETLB_PAGE
-
+#ifdef CONFIG_PPC_MM_SLICES
#define HAVE_ARCH_UNMAPPED_AREA
#define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN
-
-#endif
+#endif /* CONFIG_PPC_MM_SLICES */
#ifndef __ASSEMBLY__
return 0;
}
+#undef dereference_function_descriptor
+void *dereference_function_descriptor(void *);
+
#endif
#endif /* __KERNEL__ */
ifdef CONFIG_FTRACE
# Do not trace early boot code
-CFLAGS_REMOVE_cputable.o = -pg
-CFLAGS_REMOVE_prom_init.o = -pg
+CFLAGS_REMOVE_cputable.o = -pg -mno-sched-epilog
+CFLAGS_REMOVE_prom_init.o = -pg -mno-sched-epilog
+CFLAGS_REMOVE_btext.o = -pg -mno-sched-epilog
ifdef CONFIG_DYNAMIC_FTRACE
# dynamic ftrace setup.
-CFLAGS_REMOVE_ftrace.o = -pg
+CFLAGS_REMOVE_ftrace.o = -pg -mno-sched-epilog
endif
endif
unsigned int flags, unsigned int length)
{
char *ptr = (char *) ¤t->thread.TS_FPR(reg);
- int ret;
+ int ret = 0;
flush_vsx_to_thread(current);
stw r9,_NIP(r11) /* make it do a blr */
#ifdef CONFIG_SMP
- mfspr r12,SPRN_SPRG3
+ rlwinm r12,r11,0,0,31-THREAD_SHIFT
lwz r11,TI_CPU(r12) /* get cpu number * 4 */
slwi r11,r11,2
#else
stw r9,_NIP(r11) /* make it do a blr */
#ifdef CONFIG_SMP
- mfspr r12,SPRN_SPRG3
+ rlwinm r12,r1,0,0,31-THREAD_SHIFT
lwz r11,TI_CPU(r12) /* get cpu number * 4 */
slwi r11,r11,2
#else
li r11,0
#endif
+
b transfer_to_handler_cont
#include <linux/err.h>
#include <linux/vmalloc.h>
#include <linux/bug.h>
+#include <linux/uaccess.h>
#include <asm/module.h>
-#include <asm/uaccess.h>
+#include <asm/sections.h>
#include <asm/firmware.h>
#include <asm/code-patching.h>
#include <linux/sort.h>
return 0;
}
+
+void *dereference_function_descriptor(void *ptr)
+{
+ struct ppc64_opd_entry *desc = ptr;
+ void *p;
+
+ if (!probe_kernel_address(&desc->funcaddr, p))
+ ptr = p;
+ return ptr;
+}
__got2_end = .;
#endif /* CONFIG_PPC32 */
- . = ALIGN(PAGE_SIZE);
- _etext = .;
- PROVIDE32 (etext = .);
} :kernel
+ . = ALIGN(PAGE_SIZE);
+ _etext = .;
+ PROVIDE32 (etext = .);
+
/* Read-only data */
RODATA
unsigned long hash, hpteg;
unsigned long vsid = get_kernel_vsid(vaddr, ssize);
unsigned long va = hpt_va(vaddr, vsid, ssize);
+ unsigned long tprot = prot;
+
+ /* Make kernel text executable */
+ if (in_kernel_text(vaddr))
+ tprot &= ~HPTE_R_N;
hash = hpt_hash(va, shift, ssize);
hpteg = ((hash & htab_hash_mask) * HPTES_PER_GROUP);
BUG_ON(!ppc_md.hpte_insert);
- ret = ppc_md.hpte_insert(hpteg, va, paddr, prot,
+ ret = ppc_md.hpte_insert(hpteg, va, paddr, tprot,
HPTE_V_BOLTED, psize, ssize);
if (ret < 0)
{
unsigned long table;
unsigned long pteg_count;
- unsigned long prot, tprot;
+ unsigned long prot;
unsigned long base = 0, size = 0, limit;
int i;
for (i=0; i < lmb.memory.cnt; i++) {
base = (unsigned long)__va(lmb.memory.region[i].base);
size = lmb.memory.region[i].size;
- tprot = prot | (in_kernel_text(base) ? _PAGE_EXEC : 0);
DBG("creating mapping for region: %lx..%lx (prot: %x)\n",
- base, size, tprot);
+ base, size, prot);
#ifdef CONFIG_U3_DART
/* Do not map the DART space. Fortunately, it will be aligned
unsigned long dart_table_end = dart_tablebase + 16 * MB;
if (base != dart_tablebase)
BUG_ON(htab_bolt_mapping(base, dart_tablebase,
- __pa(base), tprot,
+ __pa(base), prot,
mmu_linear_psize,
mmu_kernel_ssize));
if ((base + size) > dart_table_end)
BUG_ON(htab_bolt_mapping(dart_tablebase+16*MB,
base + size,
__pa(dart_table_end),
- tprot,
+ prot,
mmu_linear_psize,
mmu_kernel_ssize));
continue;
}
#endif /* CONFIG_U3_DART */
BUG_ON(htab_bolt_mapping(base, base + size, __pa(base),
- tprot, mmu_linear_psize, mmu_kernel_ssize));
+ prot, mmu_linear_psize, mmu_kernel_ssize));
}
/*
!(tmp->flags & SPU_CREATE_NOSCHED) &&
(!victim || tmp->prio > victim->prio)) {
victim = spu->ctx;
- get_spu_context(victim);
}
}
+ if (victim)
+ get_spu_context(victim);
mutex_unlock(&cbe_spu_info[node].list_mutex);
if (victim) {
/* not a candidate for interruptible because it's called either
from the scheduler thread or from spu_deactivate */
mutex_lock(&ctx->state_mutex);
- __spu_schedule(spu, ctx);
+ if (ctx->state == SPU_STATE_SAVED)
+ __spu_schedule(spu, ctx);
spu_release(ctx);
}
-static void spu_unschedule(struct spu *spu, struct spu_context *ctx)
+/**
+ * spu_unschedule - remove a context from a spu, and possibly release it.
+ * @spu: The SPU to unschedule from
+ * @ctx: The context currently scheduled on the SPU
+ * @free_spu Whether to free the SPU for other contexts
+ *
+ * Unbinds the context @ctx from the SPU @spu. If @free_spu is non-zero, the
+ * SPU is made available for other contexts (ie, may be returned by
+ * spu_get_idle). If this is zero, the caller is expected to schedule another
+ * context to this spu.
+ *
+ * Should be called with ctx->state_mutex held.
+ */
+static void spu_unschedule(struct spu *spu, struct spu_context *ctx,
+ int free_spu)
{
int node = spu->node;
mutex_lock(&cbe_spu_info[node].list_mutex);
cbe_spu_info[node].nr_active--;
- spu->alloc_state = SPU_FREE;
+ if (free_spu)
+ spu->alloc_state = SPU_FREE;
spu_unbind_context(spu, ctx);
ctx->stats.invol_ctx_switch++;
spu->stats.invol_ctx_switch++;
if (spu) {
new = grab_runnable_context(max_prio, spu->node);
if (new || force) {
- spu_unschedule(spu, ctx);
+ spu_unschedule(spu, ctx, new == NULL);
if (new) {
if (new->flags & SPU_CREATE_NOSCHED)
wake_up(&new->stop_wq);
new = grab_runnable_context(ctx->prio + 1, spu->node);
if (new) {
- spu_unschedule(spu, ctx);
+ spu_unschedule(spu, ctx, 0);
if (test_bit(SPU_SCHED_SPU_RUN, &ctx->sched_flags))
spu_add_to_rq(ctx);
} else {
ifdef CONFIG_FTRACE
# Do not trace early boot code
-CFLAGS_REMOVE_bootx_init.o = -pg
+CFLAGS_REMOVE_bootx_init.o = -pg -mno-sched-epilog
endif
obj-y += pic.o setup.o time.o feature.o pci.o \
u32 gprs[NUM_GPRS];
u32 acrs[NUM_ACRS];
u32 orig_gpr2;
+ /* nb: there's a 4-byte hole here */
s390_fp_regs fp_regs;
/*
* These per registers are in here so that gdb can modify them
*/
tmp = (addr_t) task_pt_regs(child)->orig_gpr2;
+ } else if (addr < (addr_t) &dummy->regs.fp_regs) {
+ /*
+ * prevent reads of padding hole between
+ * orig_gpr2 and fp_regs on s390.
+ */
+ tmp = 0;
+
} else if (addr < (addr_t) (&dummy->regs.fp_regs + 1)) {
/*
* floating point regs. are stored in the thread structure
*/
task_pt_regs(child)->orig_gpr2 = data;
+ } else if (addr < (addr_t) &dummy->regs.fp_regs) {
+ /*
+ * prevent writes of padding hole between
+ * orig_gpr2 and fp_regs on s390.
+ */
+ return 0;
+
} else if (addr < (addr_t) (&dummy->regs.fp_regs + 1)) {
/*
* floating point regs. are stored in the thread structure
*/
tmp = *(__u32*)((addr_t) &task_pt_regs(child)->orig_gpr2 + 4);
+ } else if (addr < (addr_t) &dummy32->regs.fp_regs) {
+ /*
+ * prevent reads of padding hole between
+ * orig_gpr2 and fp_regs on s390.
+ */
+ tmp = 0;
+
} else if (addr < (addr_t) (&dummy32->regs.fp_regs + 1)) {
/*
* floating point regs. are stored in the thread structure
*/
*(__u32*)((addr_t) &task_pt_regs(child)->orig_gpr2 + 4) = tmp;
+ } else if (addr < (addr_t) &dummy32->regs.fp_regs) {
+ /*
+ * prevent writess of padding hole between
+ * orig_gpr2 and fp_regs on s390.
+ */
+ return 0;
+
} else if (addr < (addr_t) (&dummy32->regs.fp_regs + 1)) {
/*
* floating point regs. are stored in the thread structure
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26
-# Wed Jul 30 01:18:59 2008
+# Linux kernel version: 2.6.27-rc4
+# Tue Aug 26 14:21:17 2008
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KALLSYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
# CONFIG_USE_GENERIC_SMP_HELPERS is not set
CONFIG_HAVE_CLK=y
CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SECCOMP=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-# CONFIG_UIO is not set
+CONFIG_UIO=y
+# CONFIG_UIO_PDRV is not set
+CONFIG_UIO_PDRV_GENIRQ=y
+# CONFIG_UIO_SMX is not set
#
# File systems
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26
-# Wed Jul 30 01:44:41 2008
+# Linux kernel version: 2.6.27-rc4
+# Tue Aug 26 14:18:17 2008
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_USE_GENERIC_SMP_HELPERS is not set
CONFIG_HAVE_CLK=y
CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_SCHED_HRTICK is not set
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SECCOMP=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
# CONFIG_USB is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
CONFIG_RTC_DRV_SH=y
# CONFIG_DMADEVICES is not set
-# CONFIG_UIO is not set
+CONFIG_UIO=y
+# CONFIG_UIO_PDRV is not set
+CONFIG_UIO_PDRV_GENIRQ=y
+# CONFIG_UIO_SMX is not set
#
# File systems
extern long __put_user_asm_q(void *, long);
extern void __put_user_unknown(void);
+extern long __strnlen_user(const char *__s, long __n);
+
#endif /* __ASM_SH_UACCESS_64_H */
* arch/sh/kernel/cpu/sh5/entry.S
*
* Copyright (C) 2000, 2001 Paolo Alberelli
- * Copyright (C) 2004 - 2007 Paul Mundt
+ * Copyright (C) 2004 - 2008 Paul Mundt
* Copyright (C) 2003, 2004 Richard Curnow
*
* This file is subject to the terms and conditions of the GNU General Public
blink tr0, ZERO
resume_kernel:
+ CLI()
+
pta restore_all, tr0
getcon KCR0, r6
andi r7, 0xf0, r7
bne r7, ZERO, tr0
- movi ((PREEMPT_ACTIVE >> 16) & 65535), r8
- shori (PREEMPT_ACTIVE & 65535), r8
- st.l r6, TI_PRE_COUNT, r8
-
- STI()
- movi schedule, r7
+ movi preempt_schedule_irq, r7
ori r7, 1, r7
ptabs r7, tr1
blink tr1, LINK
- st.l r6, TI_PRE_COUNT, ZERO
- CLI()
-
pta need_resched, tr1
blink tr1, ZERO
#endif
bra resume_userspace
nop
ENTRY(resume_kernel)
+ cli
mov.l @(TI_PRE_COUNT,r8), r0 ! current_thread_info->preempt_count
tst r0, r0
bf noresched
and #0xf0, r0 ! interrupts off (exception path)?
cmp/eq #0xf0, r0
bt noresched
-
- mov.l 1f, r0
- mov.l r0, @(TI_PRE_COUNT,r8)
-
-#ifdef CONFIG_TRACE_IRQFLAGS
mov.l 3f, r0
- jsr @r0
- nop
-#endif
- sti
- mov.l 2f, r0
- jsr @r0
- nop
- mov #0, r0
- mov.l r0, @(TI_PRE_COUNT,r8)
- cli
-#ifdef CONFIG_TRACE_IRQFLAGS
- mov.l 4f, r0
- jsr @r0
+ jsr @r0 ! call preempt_schedule_irq
nop
-#endif
-
bra need_resched
nop
.align 2
1: .long PREEMPT_ACTIVE
2: .long schedule
-#ifdef CONFIG_TRACE_IRQFLAGS
-3: .long trace_hardirqs_on
-4: .long trace_hardirqs_off
-#endif
+3: .long preempt_schedule_irq
#endif
ENTRY(resume_userspace)
/* now call it */
rnk = (relocate_new_kernel_t) reboot_code_buffer;
- (*rnk)(page_list, reboot_code_buffer, image->start, vbr_reg);
+ (*rnk)(page_list, reboot_code_buffer, P2SEGADDR(image->start), vbr_reg);
}
void arch_crash_save_vmcoreinfo(void)
void user_disable_single_step(struct task_struct *child)
{
+ struct pt_regs *regs = child->thread.uregs;
+
regs->sr &= ~SR_SSTEP;
}
(unsigned long)(free_mem >> 20));
crashk_res.start = crash_base;
crashk_res.end = crash_base + crash_size - 1;
+ insert_resource(&iomem_resource, &crashk_res);
}
}
#else
request_resource(res, &data_resource);
request_resource(res, &bss_resource);
-#ifdef CONFIG_KEXEC
- if (crashk_res.start != crashk_res.end)
- request_resource(res, &crashk_res);
-#endif
-
add_active_range(nid, start_pfn, end_pfn);
}
version = call >> 16; /* hack for backward compatibility */
call &= 0xffff;
- if (call <= SEMCTL)
+ if (call <= SEMTIMEDOP)
switch (call) {
case SEMOP:
return sys_semtimedop(first,
}
__setup("memchunk.", memchunk_setup);
-static void memchunk_cmdline_override(char *name, unsigned long *sizep)
+static void __init memchunk_cmdline_override(char *name, unsigned long *sizep)
{
char *p = boot_command_line;
int k = strlen(name);
}
}
-int platform_resource_setup_memory(struct platform_device *pdev,
- char *name, unsigned long memsize)
+int __init platform_resource_setup_memory(struct platform_device *pdev,
+ char *name, unsigned long memsize)
{
struct resource *r;
dma_addr_t dma_handle;
void smp_bogo(struct seq_file *);
void smp_info(struct seq_file *);
-BTFIXUPDEF_CALL(void, smp_cross_call, smpfunc_t, unsigned long, unsigned long, unsigned long, unsigned long, unsigned long)
+BTFIXUPDEF_CALL(void, smp_cross_call, smpfunc_t, cpumask_t, unsigned long, unsigned long, unsigned long, unsigned long)
BTFIXUPDEF_CALL(int, __hard_smp_processor_id, void)
BTFIXUPDEF_BLACKBOX(hard_smp_processor_id)
BTFIXUPDEF_BLACKBOX(load_current)
-#define smp_cross_call(func,arg1,arg2,arg3,arg4,arg5) BTFIXUP_CALL(smp_cross_call)(func,arg1,arg2,arg3,arg4,arg5)
+#define smp_cross_call(func,mask,arg1,arg2,arg3,arg4) BTFIXUP_CALL(smp_cross_call)(func,mask,arg1,arg2,arg3,arg4)
-static inline void xc0(smpfunc_t func) { smp_cross_call(func, 0, 0, 0, 0, 0); }
+static inline void xc0(smpfunc_t func) { smp_cross_call(func, cpu_online_map, 0, 0, 0, 0); }
static inline void xc1(smpfunc_t func, unsigned long arg1)
-{ smp_cross_call(func, arg1, 0, 0, 0, 0); }
+{ smp_cross_call(func, cpu_online_map, arg1, 0, 0, 0); }
static inline void xc2(smpfunc_t func, unsigned long arg1, unsigned long arg2)
-{ smp_cross_call(func, arg1, arg2, 0, 0, 0); }
+{ smp_cross_call(func, cpu_online_map, arg1, arg2, 0, 0); }
static inline void xc3(smpfunc_t func, unsigned long arg1, unsigned long arg2,
unsigned long arg3)
-{ smp_cross_call(func, arg1, arg2, arg3, 0, 0); }
+{ smp_cross_call(func, cpu_online_map, arg1, arg2, arg3, 0); }
static inline void xc4(smpfunc_t func, unsigned long arg1, unsigned long arg2,
unsigned long arg3, unsigned long arg4)
-{ smp_cross_call(func, arg1, arg2, arg3, arg4, 0); }
-static inline void xc5(smpfunc_t func, unsigned long arg1, unsigned long arg2,
- unsigned long arg3, unsigned long arg4, unsigned long arg5)
-{ smp_cross_call(func, arg1, arg2, arg3, arg4, arg5); }
+{ smp_cross_call(func, cpu_online_map, arg1, arg2, arg3, arg4); }
static inline int smp_call_function(void (*func)(void *info), void *info, int wait)
{
return 0;
}
+static inline int smp_call_function_single(int cpuid, void (*func) (void *info),
+ void *info, int wait)
+{
+ smp_cross_call((smpfunc_t)func, cpumask_of_cpu(cpuid),
+ (unsigned long) info, 0, 0, 0);
+ return 0;
+}
+
static inline int cpu_logical_map(int cpu)
{
return cpu;
int *addrc, int *sizec);
int (*map)(u32 *addr, const u32 *range,
int na, int ns, int pna);
- unsigned int (*get_flags)(const u32 *addr);
+ unsigned long (*get_flags)(const u32 *addr, unsigned long);
};
/*
return 0;
}
-static unsigned int of_bus_default_get_flags(const u32 *addr)
+static unsigned long of_bus_default_get_flags(const u32 *addr, unsigned long flags)
{
+ if (flags)
+ return flags;
return IORESOURCE_MEM;
}
return 0;
}
-static unsigned int of_bus_pci_get_flags(const u32 *addr)
+static unsigned long of_bus_pci_get_flags(const u32 *addr, unsigned long flags)
{
- unsigned int flags = 0;
u32 w = addr[0];
+ /* For PCI, we override whatever child busses may have used. */
+ flags = 0;
switch((w >> 24) & 0x03) {
case 0x01:
flags |= IORESOURCE_IO;
+ break;
+
case 0x02: /* 32 bits */
case 0x03: /* 64 bits */
flags |= IORESOURCE_MEM;
+ break;
}
if (w & 0x40000000)
flags |= IORESOURCE_PREFETCH;
int pna, pns;
size = of_read_addr(reg + na, ns);
- flags = bus->get_flags(reg);
memcpy(addr, reg, na * 4);
+ flags = bus->get_flags(reg, 0);
+
/* If the immediate parent has no ranges property to apply,
* just use a 1<->1 mapping.
*/
dna, dns, pna))
break;
+ flags = pbus->get_flags(addr, flags);
+
dna = pna;
dns = pns;
dbus = pbus;
static DEFINE_SPINLOCK(cross_call_lock);
/* Cross calls must be serialized, at least currently. */
-void smp4d_cross_call(smpfunc_t func, unsigned long arg1, unsigned long arg2,
- unsigned long arg3, unsigned long arg4, unsigned long arg5)
+static void smp4d_cross_call(smpfunc_t func, cpumask_t mask, unsigned long arg1,
+ unsigned long arg2, unsigned long arg3,
+ unsigned long arg4)
{
if(smp_processors_ready) {
register int high = smp_highest_cpu;
register unsigned long a2 asm("i2") = arg2;
register unsigned long a3 asm("i3") = arg3;
register unsigned long a4 asm("i4") = arg4;
- register unsigned long a5 asm("i5") = arg5;
+ register unsigned long a5 asm("i5") = 0;
__asm__ __volatile__(
"std %0, [%6]\n\t"
/* Init receive/complete mapping, plus fire the IPI's off. */
{
- cpumask_t mask;
register int i;
- mask = cpumask_of_cpu(hard_smp4d_processor_id());
- cpus_andnot(mask, cpu_online_map, mask);
+ cpu_clear(smp_processor_id(), mask);
+ cpus_and(mask, cpu_online_map, mask);
for(i = 0; i <= high; i++) {
if (cpu_isset(i, mask)) {
ccall_info.processors_in[i] = 0;
i = 0;
do {
+ if (!cpu_isset(i, mask))
+ continue;
while(!ccall_info.processors_in[i])
barrier();
} while(++i <= high);
i = 0;
do {
+ if (!cpu_isset(i, mask))
+ continue;
while(!ccall_info.processors_out[i])
barrier();
} while(++i <= high);
static DEFINE_SPINLOCK(cross_call_lock);
/* Cross calls must be serialized, at least currently. */
-static void smp4m_cross_call(smpfunc_t func, unsigned long arg1,
+static void smp4m_cross_call(smpfunc_t func, cpumask_t mask, unsigned long arg1,
unsigned long arg2, unsigned long arg3,
- unsigned long arg4, unsigned long arg5)
+ unsigned long arg4)
{
register int ncpus = SUN4M_NCPUS;
unsigned long flags;
ccall_info.arg2 = arg2;
ccall_info.arg3 = arg3;
ccall_info.arg4 = arg4;
- ccall_info.arg5 = arg5;
+ ccall_info.arg5 = 0;
/* Init receive/complete mapping, plus fire the IPI's off. */
{
- cpumask_t mask = cpu_online_map;
register int i;
cpu_clear(smp_processor_id(), mask);
+ cpus_and(mask, cpu_online_map, mask);
for(i = 0; i < ncpus; i++) {
if (cpu_isset(i, mask)) {
ccall_info.processors_in[i] = 0;
i = 0;
do {
+ if (!cpu_isset(i, mask))
+ continue;
while(!ccall_info.processors_in[i])
barrier();
} while(++i < ncpus);
i = 0;
do {
+ if (!cpu_isset(i, mask))
+ continue;
while(!ccall_info.processors_out[i])
barrier();
} while(++i < ncpus);
}
spin_unlock_irqrestore(&irq_desc[irq].lock, flags);
}
+
+ tick_ops->disable_irq();
}
#endif
int *addrc, int *sizec);
int (*map)(u32 *addr, const u32 *range,
int na, int ns, int pna);
- unsigned int (*get_flags)(const u32 *addr);
+ unsigned long (*get_flags)(const u32 *addr, unsigned long);
};
/*
return 0;
}
-static unsigned int of_bus_default_get_flags(const u32 *addr)
+static unsigned long of_bus_default_get_flags(const u32 *addr, unsigned long flags)
{
+ if (flags)
+ return flags;
return IORESOURCE_MEM;
}
return 0;
}
-static unsigned int of_bus_pci_get_flags(const u32 *addr)
+static unsigned long of_bus_pci_get_flags(const u32 *addr, unsigned long flags)
{
- unsigned int flags = 0;
u32 w = addr[0];
+ /* For PCI, we override whatever child busses may have used. */
+ flags = 0;
switch((w >> 24) & 0x03) {
case 0x01:
flags |= IORESOURCE_IO;
+ break;
+
case 0x02: /* 32 bits */
case 0x03: /* 64 bits */
flags |= IORESOURCE_MEM;
+ break;
}
if (w & 0x40000000)
flags |= IORESOURCE_PREFETCH;
int pna, pns;
size = of_read_addr(reg + na, ns);
- flags = bus->get_flags(reg);
-
memcpy(addr, reg, na * 4);
+ flags = bus->get_flags(addr, 0);
+
if (use_1to1_mapping(pp)) {
result = of_read_addr(addr, na);
goto build_res;
dna, dns, pna))
break;
+ flags = pbus->get_flags(addr, flags);
+
dna = pna;
dns = pns;
dbus = pbus;
i, cpu_data(i).clock_tick);
}
-static __cacheline_aligned_in_smp DEFINE_SPINLOCK(call_lock);
-
extern void setup_sparc64_timer(void);
static volatile unsigned long callin_flag = 0;
while (!cpu_isset(cpuid, smp_commenced_mask))
rmb();
- spin_lock(&call_lock);
+ ipi_call_lock();
cpu_set(cpuid, cpu_online_map);
- spin_unlock(&call_lock);
+ ipi_call_unlock();
/* idle thread is expected to have preempt disabled */
preempt_disable();
c->core_id = 0;
c->proc_id = -1;
- spin_lock(&call_lock);
- cpu_clear(cpu, cpu_online_map);
- spin_unlock(&call_lock);
-
smp_wmb();
/* Make sure no interrupts point to this cpu. */
mdelay(1);
local_irq_disable();
+ ipi_call_lock();
+ cpu_clear(cpu, cpu_online_map);
+ ipi_call_unlock();
+
return 0;
}
* memory list again, and make sure it provides at least as much
* memory as 'pavail' does.
*/
-static void setup_valid_addr_bitmap_from_pavail(void)
+static void __init setup_valid_addr_bitmap_from_pavail(void)
{
int i;
# P6_NOPs are a relatively minor optimization that require a family >=
# 6 processor, except that it is broken on certain VIA chips.
# Furthermore, AMD chips prefer a totally different sequence of NOPs
-# (which work on all CPUs). As a result, disallow these if we're
-# compiling X86_GENERIC but not X86_64 (these NOPs do work on all
-# x86-64 capable chips); the list of processors in the right-hand clause
-# are the cores that benefit from this optimization.
+# (which work on all CPUs). In addition, it looks like Virtual PC
+# does not understand them.
+#
+# As a result, disallow these if we're not compiling for X86_64 (these
+# NOPs do work on all x86-64 capable chips); the list of processors in
+# the right-hand clause are the cores that benefit from this optimization.
#
config X86_P6_NOP
def_bool y
- depends on (X86_64 || !X86_GENERIC) && (M686 || MPENTIUMII || MPENTIUMIII || MPENTIUMM || MCORE2 || MPENTIUM4 || MPSC)
+ depends on X86_64
+ depends on (MCORE2 || MPENTIUM4 || MPSC)
config X86_TSC
def_bool y
{
REQUIRED_MASK0,
REQUIRED_MASK1,
- REQUIRED_MASK2,
- REQUIRED_MASK3,
+ 0, /* REQUIRED_MASK2 not implemented in this file */
+ 0, /* REQUIRED_MASK3 not implemented in this file */
REQUIRED_MASK4,
- REQUIRED_MASK5,
+ 0, /* REQUIRED_MASK5 not implemented in this file */
REQUIRED_MASK6,
- REQUIRED_MASK7,
+ 0, /* REQUIRED_MASK7 not implemented in this file */
};
#define A32(a, b, c, d) (((d) << 24)+((c) << 16)+((b) << 8)+(a))
extern char __vsyscall_0;
const unsigned char *const *find_nop_table(void)
{
- return boot_cpu_data.x86_vendor != X86_VENDOR_INTEL ||
- boot_cpu_data.x86 < 6 ? k8_nops : p6_nops;
+ if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
+ boot_cpu_has(X86_FEATURE_NOPL))
+ return p6_nops;
+ else
+ return k8_nops;
}
#else /* CONFIG_X86_64 */
-static const struct nop {
- int cpuid;
- const unsigned char *const *noptable;
-} noptypes[] = {
- { X86_FEATURE_K8, k8_nops },
- { X86_FEATURE_K7, k7_nops },
- { X86_FEATURE_P4, p6_nops },
- { X86_FEATURE_P3, p6_nops },
- { -1, NULL }
-};
-
const unsigned char *const *find_nop_table(void)
{
- const unsigned char *const *noptable = intel_nops;
- int i;
-
- for (i = 0; noptypes[i].cpuid >= 0; i++) {
- if (boot_cpu_has(noptypes[i].cpuid)) {
- noptable = noptypes[i].noptable;
- break;
- }
- }
- return noptable;
+ if (boot_cpu_has(X86_FEATURE_K8))
+ return k8_nops;
+ else if (boot_cpu_has(X86_FEATURE_K7))
+ return k7_nops;
+ else if (boot_cpu_has(X86_FEATURE_NOPL))
+ return p6_nops;
+ else
+ return intel_nops;
}
#endif /* CONFIG_X86_64 */
if (c->x86_power & (1<<8))
set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
}
+
+ /* Set MTRR capability flag if appropriate */
+ if (c->x86_model == 13 || c->x86_model == 9 ||
+ (c->x86_model == 8 && c->x86_mask >= 8))
+ set_cpu_cap(c, X86_FEATURE_K6_MTRR);
}
static void __cpuinit init_amd(struct cpuinfo_x86 *c)
mbytes);
}
- /* Set MTRR capability flag if appropriate */
- if (c->x86_model == 13 || c->x86_model == 9 ||
- (c->x86_model == 8 && c->x86_mask >= 8))
- set_cpu_cap(c, X86_FEATURE_K6_MTRR);
break;
}
EAMD3D = 1<<20,
};
+static void __cpuinit early_init_centaur(struct cpuinfo_x86 *c)
+{
+ switch (c->x86) {
+ case 5:
+ /* Emulate MTRRs using Centaur's MCR. */
+ set_cpu_cap(c, X86_FEATURE_CENTAUR_MCR);
+ break;
+ }
+}
+
static void __cpuinit init_centaur(struct cpuinfo_x86 *c)
{
static struct cpu_dev centaur_cpu_dev __cpuinitdata = {
.c_vendor = "Centaur",
.c_ident = { "CentaurHauls" },
+ .c_early_init = early_init_centaur,
.c_init = init_centaur,
.c_size_cache = centaur_size_cache,
};
#include <asm/mtrr.h>
#include <asm/mce.h>
#include <asm/pat.h>
+#include <asm/asm.h>
#ifdef CONFIG_X86_LOCAL_APIC
#include <asm/mpspec.h>
#include <asm/apic.h>
get_cpu_vendor(c, 1);
+ early_get_cap(c);
+
if (c->x86_vendor != X86_VENDOR_UNKNOWN &&
cpu_devs[c->x86_vendor]->c_early_init)
cpu_devs[c->x86_vendor]->c_early_init(c);
+}
- early_get_cap(c);
+/*
+ * The NOPL instruction is supposed to exist on all CPUs with
+ * family >= 6, unfortunately, that's not true in practice because
+ * of early VIA chips and (more importantly) broken virtualizers that
+ * are not easy to detect. Hence, probe for it based on first
+ * principles.
+ */
+static void __cpuinit detect_nopl(struct cpuinfo_x86 *c)
+{
+ const u32 nopl_signature = 0x888c53b1; /* Random number */
+ u32 has_nopl = nopl_signature;
+
+ clear_cpu_cap(c, X86_FEATURE_NOPL);
+ if (c->x86 >= 6) {
+ asm volatile("\n"
+ "1: .byte 0x0f,0x1f,0xc0\n" /* nopl %eax */
+ "2:\n"
+ " .section .fixup,\"ax\"\n"
+ "3: xor %0,%0\n"
+ " jmp 2b\n"
+ " .previous\n"
+ _ASM_EXTABLE(1b,3b)
+ : "+a" (has_nopl));
+
+ if (has_nopl == nopl_signature)
+ set_cpu_cap(c, X86_FEATURE_NOPL);
+ }
}
static void __cpuinit generic_identify(struct cpuinfo_x86 *c)
}
init_scattered_cpuid_features(c);
+ detect_nopl(c);
}
-
}
static void __cpuinit squash_the_stupid_serial_number(struct cpuinfo_x86 *c)
#include <asm/mtrr.h>
#include <asm/mce.h>
#include <asm/pat.h>
+#include <asm/asm.h>
#include <asm/numa.h>
#ifdef CONFIG_X86_LOCAL_APIC
#include <asm/mpspec.h>
}
}
+/*
+ * The NOPL instruction is supposed to exist on all CPUs with
+ * family >= 6, unfortunately, that's not true in practice because
+ * of early VIA chips and (more importantly) broken virtualizers that
+ * are not easy to detect. Hence, probe for it based on first
+ * principles.
+ *
+ * Note: no 64-bit chip is known to lack these, but put the code here
+ * for consistency with 32 bits, and to make it utterly trivial to
+ * diagnose the problem should it ever surface.
+ */
+static void __cpuinit detect_nopl(struct cpuinfo_x86 *c)
+{
+ const u32 nopl_signature = 0x888c53b1; /* Random number */
+ u32 has_nopl = nopl_signature;
+
+ clear_cpu_cap(c, X86_FEATURE_NOPL);
+ if (c->x86 >= 6) {
+ asm volatile("\n"
+ "1: .byte 0x0f,0x1f,0xc0\n" /* nopl %eax */
+ "2:\n"
+ " .section .fixup,\"ax\"\n"
+ "3: xor %0,%0\n"
+ " jmp 2b\n"
+ " .previous\n"
+ _ASM_EXTABLE(1b,3b)
+ : "+a" (has_nopl));
+
+ if (has_nopl == nopl_signature)
+ set_cpu_cap(c, X86_FEATURE_NOPL);
+ }
+}
+
static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c);
void __init early_cpu_init(void)
c->x86_phys_bits = eax & 0xff;
}
+ detect_nopl(c);
+
if (c->x86_vendor != X86_VENDOR_UNKNOWN &&
cpu_devs[c->x86_vendor]->c_early_init)
cpu_devs[c->x86_vendor]->c_early_init(c);
/* others are initialized in smpboot.c */
pda->pcurrent = &init_task;
pda->irqstackptr = boot_cpu_stack;
+ pda->irqstackptr += IRQSTACKSIZE - 64;
} else {
- pda->irqstackptr = (char *)
- __get_free_pages(GFP_ATOMIC, IRQSTACK_ORDER);
- if (!pda->irqstackptr)
- panic("cannot allocate irqstack for cpu %d", cpu);
+ if (!pda->irqstackptr) {
+ pda->irqstackptr = (char *)
+ __get_free_pages(GFP_ATOMIC, IRQSTACK_ORDER);
+ if (!pda->irqstackptr)
+ panic("cannot allocate irqstack for cpu %d",
+ cpu);
+ pda->irqstackptr += IRQSTACKSIZE - 64;
+ }
if (pda->nodenumber == 0 && cpu_to_node(cpu) != NUMA_NO_NODE)
pda->nodenumber = cpu_to_node(cpu);
}
-
- pda->irqstackptr += IRQSTACKSIZE-64;
}
char boot_exception_stacks[(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ +
/*
* set up and load the per-CPU TSS
*/
- for (v = 0; v < N_EXCEPTION_STACKS; v++) {
+ if (!orig_ist->ist[0]) {
static const unsigned int order[N_EXCEPTION_STACKS] = {
- [0 ... N_EXCEPTION_STACKS - 1] = EXCEPTION_STACK_ORDER,
- [DEBUG_STACK - 1] = DEBUG_STACK_ORDER
+ [0 ... N_EXCEPTION_STACKS - 1] = EXCEPTION_STACK_ORDER,
+ [DEBUG_STACK - 1] = DEBUG_STACK_ORDER
};
- if (cpu) {
- estacks = (char *)__get_free_pages(GFP_ATOMIC, order[v]);
- if (!estacks)
- panic("Cannot allocate exception stack %ld %d\n",
- v, cpu);
+ for (v = 0; v < N_EXCEPTION_STACKS; v++) {
+ if (cpu) {
+ estacks = (char *)__get_free_pages(GFP_ATOMIC, order[v]);
+ if (!estacks)
+ panic("Cannot allocate exception "
+ "stack %ld %d\n", v, cpu);
+ }
+ estacks += PAGE_SIZE << order[v];
+ orig_ist->ist[v] = t->x86_tss.ist[v] =
+ (unsigned long)estacks;
}
- estacks += PAGE_SIZE << order[v];
- orig_ist->ist[v] = t->x86_tss.ist[v] = (unsigned long)estacks;
}
t->x86_tss.io_bitmap_base = offsetof(struct tss_struct, io_bitmap);
/*
* Read NSC/Cyrix DEVID registers (DIR) to get more detailed info. about the CPU
*/
-static void __cpuinit do_cyrix_devid(unsigned char *dir0, unsigned char *dir1)
+static void __cpuinit __do_cyrix_devid(unsigned char *dir0, unsigned char *dir1)
{
unsigned char ccr2, ccr3;
- unsigned long flags;
/* we test for DEVID by checking whether CCR3 is writable */
- local_irq_save(flags);
ccr3 = getCx86(CX86_CCR3);
setCx86(CX86_CCR3, ccr3 ^ 0x80);
getCx86(0xc0); /* dummy to change bus */
*dir0 = getCx86(CX86_DIR0);
*dir1 = getCx86(CX86_DIR1);
}
- local_irq_restore(flags);
}
+static void __cpuinit do_cyrix_devid(unsigned char *dir0, unsigned char *dir1)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ __do_cyrix_devid(dir0, dir1);
+ local_irq_restore(flags);
+}
/*
* Cx86_dir0_msb is a HACK needed by check_cx686_cpuid/slop in bugs.h in
* order to identify the Cyrix CPU model after we're out of setup.c
local_irq_restore(flags);
}
+static void __cpuinit early_init_cyrix(struct cpuinfo_x86 *c)
+{
+ unsigned char dir0, dir0_msn, dir1 = 0;
+
+ __do_cyrix_devid(&dir0, &dir1);
+ dir0_msn = dir0 >> 4; /* identifies CPU "family" */
+
+ switch (dir0_msn) {
+ case 3: /* 6x86/6x86L */
+ /* Emulate MTRRs using Cyrix's ARRs. */
+ set_cpu_cap(c, X86_FEATURE_CYRIX_ARR);
+ break;
+ case 5: /* 6x86MX/M II */
+ /* Emulate MTRRs using Cyrix's ARRs. */
+ set_cpu_cap(c, X86_FEATURE_CYRIX_ARR);
+ break;
+ }
+}
static void __cpuinit init_cyrix(struct cpuinfo_x86 *c)
{
static struct cpu_dev cyrix_cpu_dev __cpuinitdata = {
.c_vendor = "Cyrix",
.c_ident = { "CyrixInstead" },
+ .c_early_init = early_init_cyrix,
.c_init = init_cyrix,
.c_identify = cyrix_identify,
};
NULL, NULL, NULL, NULL,
"constant_tsc", "up", NULL, "arch_perfmon",
"pebs", "bts", NULL, NULL,
- "rep_good", NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+ "rep_good", NULL, NULL, NULL,
+ "nopl", NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
/* Intel-defined (#2) */
if (!p)
return -EINVAL;
- if (!strcmp(p, "exactmap")) {
+ if (!strncmp(p, "exactmap", 8)) {
#ifdef CONFIG_CRASH_DUMP
/*
* If we are doing a crash dump, we still need to know
/* Calculate the min / max delta */
hpet_clockevent.max_delta_ns = clockevent_delta2ns(0x7FFFFFFF,
&hpet_clockevent);
- hpet_clockevent.min_delta_ns = clockevent_delta2ns(0x30,
- &hpet_clockevent);
+ /* 5 usec minimum reprogramming delta. */
+ hpet_clockevent.min_delta_ns = 5000;
/*
* Start hpet with the boot cpu mask and make it
}
static int hpet_legacy_next_event(unsigned long delta,
- struct clock_event_device *evt)
+ struct clock_event_device *evt)
{
- unsigned long cnt;
+ u32 cnt;
cnt = hpet_readl(HPET_COUNTER);
- cnt += delta;
+ cnt += (u32) delta;
hpet_writel(cnt, HPET_T0_CMP);
- return ((long)(hpet_readl(HPET_COUNTER) - cnt ) > 0) ? -ETIME : 0;
+ /*
+ * We need to read back the CMP register to make sure that
+ * what we wrote hit the chip before we compare it to the
+ * counter.
+ */
+ WARN_ON((u32)hpet_readl(HPET_T0_CMP) != cnt);
+
+ return (s32)((u32)hpet_readl(HPET_COUNTER) - cnt) >= 0 ? -ETIME : 0;
}
/*
DMI_MATCH(DMI_BOARD_NAME, "30BF")
}
},
+ {
+ .callback = dmi_io_delay_0xed_port,
+ .ident = "Presario F700",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Quanta"),
+ DMI_MATCH(DMI_BOARD_NAME, "30D3")
+ }
+ },
{ }
};
return ULLONG_MAX;
}
-/**
- * native_calibrate_tsc - calibrate the tsc on boot
+/*
+ * Try to calibrate the TSC against the Programmable
+ * Interrupt Timer and return the frequency of the TSC
+ * in kHz.
+ *
+ * Return ULONG_MAX on failure to calibrate.
*/
-unsigned long native_calibrate_tsc(void)
+static unsigned long pit_calibrate_tsc(void)
{
- unsigned long flags;
- u64 tsc1, tsc2, tr1, tr2, delta, pm1, pm2, hpet1, hpet2;
- int hpet = is_hpet_enabled();
- unsigned int tsc_khz_val = 0;
-
- local_irq_save(flags);
-
- tsc1 = tsc_read_refs(&pm1, hpet ? &hpet1 : NULL);
+ u64 tsc, t1, t2, delta;
+ unsigned long tscmin, tscmax;
+ int pitcnt;
+ /* Set the Gate high, disable speaker */
outb((inb(0x61) & ~0x02) | 0x01, 0x61);
+ /*
+ * Setup CTC channel 2* for mode 0, (interrupt on terminal
+ * count mode), binary count. Set the latch register to 50ms
+ * (LSB then MSB) to begin countdown.
+ */
outb(0xb0, 0x43);
outb((CLOCK_TICK_RATE / (1000 / 50)) & 0xff, 0x42);
outb((CLOCK_TICK_RATE / (1000 / 50)) >> 8, 0x42);
- tr1 = get_cycles();
- while ((inb(0x61) & 0x20) == 0);
- tr2 = get_cycles();
- tsc2 = tsc_read_refs(&pm2, hpet ? &hpet2 : NULL);
+ tsc = t1 = t2 = get_cycles();
- local_irq_restore(flags);
+ pitcnt = 0;
+ tscmax = 0;
+ tscmin = ULONG_MAX;
+ while ((inb(0x61) & 0x20) == 0) {
+ t2 = get_cycles();
+ delta = t2 - tsc;
+ tsc = t2;
+ if ((unsigned long) delta < tscmin)
+ tscmin = (unsigned int) delta;
+ if ((unsigned long) delta > tscmax)
+ tscmax = (unsigned int) delta;
+ pitcnt++;
+ }
/*
- * Preset the result with the raw and inaccurate PIT
- * calibration value
+ * Sanity checks:
+ *
+ * If we were not able to read the PIT more than 5000
+ * times, then we have been hit by a massive SMI
+ *
+ * If the maximum is 10 times larger than the minimum,
+ * then we got hit by an SMI as well.
*/
- delta = (tr2 - tr1);
+ if (pitcnt < 5000 || tscmax > 10 * tscmin)
+ return ULONG_MAX;
+
+ /* Calculate the PIT value */
+ delta = t2 - t1;
do_div(delta, 50);
- tsc_khz_val = delta;
+ return delta;
+}
+
+
+/**
+ * native_calibrate_tsc - calibrate the tsc on boot
+ */
+unsigned long native_calibrate_tsc(void)
+{
+ u64 tsc1, tsc2, delta, pm1, pm2, hpet1, hpet2;
+ unsigned long tsc_pit_min = ULONG_MAX, tsc_ref_min = ULONG_MAX;
+ unsigned long flags;
+ int hpet = is_hpet_enabled(), i;
- /* hpet or pmtimer available ? */
+ /*
+ * Run 5 calibration loops to get the lowest frequency value
+ * (the best estimate). We use two different calibration modes
+ * here:
+ *
+ * 1) PIT loop. We set the PIT Channel 2 to oneshot mode and
+ * load a timeout of 50ms. We read the time right after we
+ * started the timer and wait until the PIT count down reaches
+ * zero. In each wait loop iteration we read the TSC and check
+ * the delta to the previous read. We keep track of the min
+ * and max values of that delta. The delta is mostly defined
+ * by the IO time of the PIT access, so we can detect when a
+ * SMI/SMM disturbance happend between the two reads. If the
+ * maximum time is significantly larger than the minimum time,
+ * then we discard the result and have another try.
+ *
+ * 2) Reference counter. If available we use the HPET or the
+ * PMTIMER as a reference to check the sanity of that value.
+ * We use separate TSC readouts and check inside of the
+ * reference read for a SMI/SMM disturbance. We dicard
+ * disturbed values here as well. We do that around the PIT
+ * calibration delay loop as we have to wait for a certain
+ * amount of time anyway.
+ */
+ for (i = 0; i < 5; i++) {
+ unsigned long tsc_pit_khz;
+
+ /*
+ * Read the start value and the reference count of
+ * hpet/pmtimer when available. Then do the PIT
+ * calibration, which will take at least 50ms, and
+ * read the end value.
+ */
+ local_irq_save(flags);
+ tsc1 = tsc_read_refs(&pm1, hpet ? &hpet1 : NULL);
+ tsc_pit_khz = pit_calibrate_tsc();
+ tsc2 = tsc_read_refs(&pm2, hpet ? &hpet2 : NULL);
+ local_irq_restore(flags);
+
+ /* Pick the lowest PIT TSC calibration so far */
+ tsc_pit_min = min(tsc_pit_min, tsc_pit_khz);
+
+ /* hpet or pmtimer available ? */
+ if (!hpet && !pm1 && !pm2)
+ continue;
+
+ /* Check, whether the sampling was disturbed by an SMI */
+ if (tsc1 == ULLONG_MAX || tsc2 == ULLONG_MAX)
+ continue;
+
+ tsc2 = (tsc2 - tsc1) * 1000000LL;
+
+ if (hpet) {
+ if (hpet2 < hpet1)
+ hpet2 += 0x100000000ULL;
+ hpet2 -= hpet1;
+ tsc1 = ((u64)hpet2 * hpet_readl(HPET_PERIOD));
+ do_div(tsc1, 1000000);
+ } else {
+ if (pm2 < pm1)
+ pm2 += (u64)ACPI_PM_OVRRUN;
+ pm2 -= pm1;
+ tsc1 = pm2 * 1000000000LL;
+ do_div(tsc1, PMTMR_TICKS_PER_SEC);
+ }
+
+ do_div(tsc2, tsc1);
+ tsc_ref_min = min(tsc_ref_min, (unsigned long) tsc2);
+ }
+
+ /*
+ * Now check the results.
+ */
+ if (tsc_pit_min == ULONG_MAX) {
+ /* PIT gave no useful value */
+ printk(KERN_WARNING "TSC: Unable to calibrate against PIT\n");
+
+ /* We don't have an alternative source, disable TSC */
+ if (!hpet && !pm1 && !pm2) {
+ printk("TSC: No reference (HPET/PMTIMER) available\n");
+ return 0;
+ }
+
+ /* The alternative source failed as well, disable TSC */
+ if (tsc_ref_min == ULONG_MAX) {
+ printk(KERN_WARNING "TSC: HPET/PMTIMER calibration "
+ "failed due to SMI disturbance.\n");
+ return 0;
+ }
+
+ /* Use the alternative source */
+ printk(KERN_INFO "TSC: using %s reference calibration\n",
+ hpet ? "HPET" : "PMTIMER");
+
+ return tsc_ref_min;
+ }
+
+ /* We don't have an alternative source, use the PIT calibration value */
if (!hpet && !pm1 && !pm2) {
- printk(KERN_INFO "TSC calibrated against PIT\n");
- goto out;
+ printk(KERN_INFO "TSC: Using PIT calibration value\n");
+ return tsc_pit_min;
}
- /* Check, whether the sampling was disturbed by an SMI */
- if (tsc1 == ULLONG_MAX || tsc2 == ULLONG_MAX) {
- printk(KERN_WARNING "TSC calibration disturbed by SMI, "
- "using PIT calibration result\n");
- goto out;
+ /* The alternative source failed, use the PIT calibration value */
+ if (tsc_ref_min == ULONG_MAX) {
+ printk(KERN_WARNING "TSC: HPET/PMTIMER calibration failed due "
+ "to SMI disturbance. Using PIT calibration\n");
+ return tsc_pit_min;
}
- tsc2 = (tsc2 - tsc1) * 1000000LL;
-
- if (hpet) {
- printk(KERN_INFO "TSC calibrated against HPET\n");
- if (hpet2 < hpet1)
- hpet2 += 0x100000000ULL;
- hpet2 -= hpet1;
- tsc1 = ((u64)hpet2 * hpet_readl(HPET_PERIOD));
- do_div(tsc1, 1000000);
- } else {
- printk(KERN_INFO "TSC calibrated against PM_TIMER\n");
- if (pm2 < pm1)
- pm2 += (u64)ACPI_PM_OVRRUN;
- pm2 -= pm1;
- tsc1 = pm2 * 1000000000LL;
- do_div(tsc1, PMTMR_TICKS_PER_SEC);
+ /* Check the reference deviation */
+ delta = ((u64) tsc_pit_min) * 100;
+ do_div(delta, tsc_ref_min);
+
+ /*
+ * If both calibration results are inside a 5% window, the we
+ * use the lower frequency of those as it is probably the
+ * closest estimate.
+ */
+ if (delta >= 95 && delta <= 105) {
+ printk(KERN_INFO "TSC: PIT calibration confirmed by %s.\n",
+ hpet ? "HPET" : "PMTIMER");
+ printk(KERN_INFO "TSC: using %s calibration value\n",
+ tsc_pit_min <= tsc_ref_min ? "PIT" :
+ hpet ? "HPET" : "PMTIMER");
+ return tsc_pit_min <= tsc_ref_min ? tsc_pit_min : tsc_ref_min;
}
- do_div(tsc2, tsc1);
- tsc_khz_val = tsc2;
+ printk(KERN_WARNING "TSC: PIT calibration deviates from %s: %lu %lu.\n",
+ hpet ? "HPET" : "PMTIMER", tsc_pit_min, tsc_ref_min);
-out:
- return tsc_khz_val;
+ /*
+ * The calibration values differ too much. In doubt, we use
+ * the PIT value as we know that there are PMTIMERs around
+ * running at double speed.
+ */
+ printk(KERN_INFO "TSC: Using PIT calibration value\n");
+ return tsc_pit_min;
}
-
#ifdef CONFIG_X86_32
/* Only called from the Powernow K7 cpu freq driver */
int recalibrate_cpu_khz(void)
#include <linux/ioport.h>
#include <linux/errno.h>
#include <linux/bootmem.h>
-#include <linux/acpi.h>
#include <asm/pat.h>
-#include <asm/hpet.h>
-#include <asm/io_apic.h>
#include "pci.h"
}
EXPORT_SYMBOL(pcibios_align_resource);
-static int check_res_with_valid(struct pci_dev *dev, struct resource *res)
-{
- unsigned long base;
- unsigned long size;
- int i;
-
- base = res->start;
- size = (res->start == 0 && res->end == res->start) ? 0 :
- (res->end - res->start + 1);
-
- if (!base || !size)
- return 0;
-
-#ifdef CONFIG_HPET_TIMER
- /* for hpet */
- if (base == hpet_address && (res->flags & IORESOURCE_MEM)) {
- dev_info(&dev->dev, "BAR has HPET at %08lx-%08lx\n",
- base, base + size - 1);
- return 1;
- }
-#endif
-
-#ifdef CONFIG_X86_IO_APIC
- for (i = 0; i < nr_ioapics; i++) {
- unsigned long ioapic_phys = mp_ioapics[i].mp_apicaddr;
-
- if (base == ioapic_phys && (res->flags & IORESOURCE_MEM)) {
- dev_info(&dev->dev, "BAR has ioapic at %08lx-%08lx\n",
- base, base + size - 1);
- return 1;
- }
- }
-#endif
-
-#ifdef CONFIG_PCI_MMCONFIG
- for (i = 0; i < pci_mmcfg_config_num; i++) {
- unsigned long addr;
-
- addr = pci_mmcfg_config[i].address;
- if (base == addr && (res->flags & IORESOURCE_MEM)) {
- dev_info(&dev->dev, "BAR has MMCONFIG at %08lx-%08lx\n",
- base, base + size - 1);
- return 1;
- }
- }
-#endif
-
- return 0;
-}
-
-static int check_platform(struct pci_dev *dev, struct resource *res)
-{
- struct resource *root = NULL;
-
- /*
- * forcibly insert it into the
- * resource tree
- */
- if (res->flags & IORESOURCE_MEM)
- root = &iomem_resource;
- else if (res->flags & IORESOURCE_IO)
- root = &ioport_resource;
-
- if (root && check_res_with_valid(dev, res)) {
- insert_resource(root, res);
-
- return 1;
- }
-
- return 0;
-}
/*
* Handle resources of PCI devices. If the world were perfect, we could
* just allocate all the resource regions and do nothing more. It isn't.
pr = pci_find_parent_resource(dev, r);
if (!r->start || !pr ||
request_resource(pr, r) < 0) {
- if (check_platform(dev, r))
- continue;
- dev_err(&dev->dev, "BAR %d: can't "
- "allocate resource\n", idx);
+ dev_err(&dev->dev, "BAR %d: can't allocate resource\n", idx);
/*
* Something is wrong with the region.
* Invalidate the resource to prevent
else
disabled = !(command & PCI_COMMAND_MEMORY);
if (pass == disabled) {
- dev_dbg(&dev->dev, "resource %#08llx-%#08llx "
- "(f=%lx, d=%d, p=%d)\n",
+ dev_dbg(&dev->dev, "resource %#08llx-%#08llx (f=%lx, d=%d, p=%d)\n",
(unsigned long long) r->start,
(unsigned long long) r->end,
r->flags, disabled, pass);
pr = pci_find_parent_resource(dev, r);
if (!pr || request_resource(pr, r) < 0) {
- if (check_platform(dev, r))
- continue;
- dev_err(&dev->dev, "BAR %d: can't "
- "allocate resource\n", idx);
+ dev_err(&dev->dev, "BAR %d: can't allocate resource\n", idx);
/* We'll assign a new address later */
r->end -= r->start;
r->start = 0;
.ptep_modify_prot_commit = __ptep_modify_prot_commit,
.pte_val = xen_pte_val,
- .pte_flags = native_pte_val,
+ .pte_flags = native_pte_flags,
.pgd_val = xen_pgd_val,
.make_pte = xen_make_pte,
return 0;
}
+EXPORT_SYMBOL(blk_register_filter);
void blk_unregister_filter(struct gendisk *disk)
{
kobject_put(&filter->kobj);
kobject_put(disk->holder_dir->parent);
}
-
+EXPORT_SYMBOL(blk_unregister_filter);
disk->minors, NULL, exact_match, exact_lock, disk);
register_disk(disk);
blk_register_queue(disk);
- blk_register_filter(disk);
bdi = &disk->queue->backing_dev_info;
bdi_register_dev(bdi, MKDEV(disk->major, disk->first_minor));
void unlink_gendisk(struct gendisk *disk)
{
- blk_unregister_filter(disk);
sysfs_remove_link(&disk->dev.kobj, "bdi");
bdi_unregister(&disk->queue->backing_dev_info);
blk_unregister_queue(disk);
loff_t k = *pos;
if (!k)
- seq_puts(part, "major minor #blocks name\n\n");
+ part->private = (void *)1LU; /* tell show to print header */
mutex_lock(&block_class_lock);
dev = class_find_device(&block_class, NULL, &k, find_start);
int n;
char buf[BDEVNAME_SIZE];
+ /*
+ * Print header if start told us to do. This is to preserve
+ * the original behavior of not printing header if no
+ * partition exists. This hackery will be removed later with
+ * class iteration clean up.
+ */
+ if (part->private) {
+ seq_puts(part, "major minor #blocks name\n\n");
+ part->private = NULL;
+ }
+
/* Don't show non-partitionable removeable devices or empty devices */
if (!get_capacity(sgp) ||
(sgp->minors == 1 && (sgp->flags & GENHD_FL_REMOVABLE)))
spin_lock_bh(&next->lock);
next->parent = NULL;
_next = next->next;
- next->next = NULL;
+ if (_next && _next->chan == chan)
+ next->next = NULL;
spin_unlock_bh(&next->lock);
next->tx_submit(next);
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/bitops.h>
-#include <asm/unaligned.h>
static const u32 camellia_sp1110[256] = {
0x70707000,0x82828200,0x2c2c2c00,0xececec00,
/*
* macros
*/
+#define GETU32(v, pt) \
+ do { \
+ /* latest breed of gcc is clever enough to use move */ \
+ memcpy(&(v), (pt), 4); \
+ (v) = be32_to_cpu(v); \
+ } while(0)
+
+/* rotation right shift 1byte */
+#define ROR8(x) (((x) >> 8) + ((x) << 24))
+/* rotation left shift 1bit */
+#define ROL1(x) (((x) << 1) + ((x) >> 31))
+/* rotation left shift 1byte */
+#define ROL8(x) (((x) << 8) + ((x) >> 24))
+
#define ROLDQ(ll, lr, rl, rr, w0, w1, bits) \
do { \
w0 = ll; \
^ camellia_sp3033[(u8)(il >> 8)] \
^ camellia_sp4404[(u8)(il )]; \
yl ^= yr; \
- yr = ror32(yr, 8); \
+ yr = ROR8(yr); \
yr ^= yl; \
} while(0)
subL[7] ^= subL[1]; subR[7] ^= subR[1];
subL[1] ^= subR[1] & ~subR[9];
dw = subL[1] & subL[9],
- subR[1] ^= rol32(dw, 1); /* modified for FLinv(kl2) */
+ subR[1] ^= ROL1(dw); /* modified for FLinv(kl2) */
/* round 8 */
subL[11] ^= subL[1]; subR[11] ^= subR[1];
/* round 10 */
subL[15] ^= subL[1]; subR[15] ^= subR[1];
subL[1] ^= subR[1] & ~subR[17];
dw = subL[1] & subL[17],
- subR[1] ^= rol32(dw, 1); /* modified for FLinv(kl4) */
+ subR[1] ^= ROL1(dw); /* modified for FLinv(kl4) */
/* round 14 */
subL[19] ^= subL[1]; subR[19] ^= subR[1];
/* round 16 */
} else {
subL[1] ^= subR[1] & ~subR[25];
dw = subL[1] & subL[25],
- subR[1] ^= rol32(dw, 1); /* modified for FLinv(kl6) */
+ subR[1] ^= ROL1(dw); /* modified for FLinv(kl6) */
/* round 20 */
subL[27] ^= subL[1]; subR[27] ^= subR[1];
/* round 22 */
subL[26] ^= kw4l; subR[26] ^= kw4r;
kw4l ^= kw4r & ~subR[24];
dw = kw4l & subL[24],
- kw4r ^= rol32(dw, 1); /* modified for FL(kl5) */
+ kw4r ^= ROL1(dw); /* modified for FL(kl5) */
}
/* round 17 */
subL[22] ^= kw4l; subR[22] ^= kw4r;
subL[18] ^= kw4l; subR[18] ^= kw4r;
kw4l ^= kw4r & ~subR[16];
dw = kw4l & subL[16],
- kw4r ^= rol32(dw, 1); /* modified for FL(kl3) */
+ kw4r ^= ROL1(dw); /* modified for FL(kl3) */
/* round 11 */
subL[14] ^= kw4l; subR[14] ^= kw4r;
/* round 9 */
subL[10] ^= kw4l; subR[10] ^= kw4r;
kw4l ^= kw4r & ~subR[8];
dw = kw4l & subL[8],
- kw4r ^= rol32(dw, 1); /* modified for FL(kl1) */
+ kw4r ^= ROL1(dw); /* modified for FL(kl1) */
/* round 5 */
subL[6] ^= kw4l; subR[6] ^= kw4r;
/* round 3 */
SUBKEY_R(6) = subR[5] ^ subR[7];
tl = subL[10] ^ (subR[10] & ~subR[8]);
dw = tl & subL[8], /* FL(kl1) */
- tr = subR[10] ^ rol32(dw, 1);
+ tr = subR[10] ^ ROL1(dw);
SUBKEY_L(7) = subL[6] ^ tl; /* round 6 */
SUBKEY_R(7) = subR[6] ^ tr;
SUBKEY_L(8) = subL[8]; /* FL(kl1) */
SUBKEY_R(9) = subR[9];
tl = subL[7] ^ (subR[7] & ~subR[9]);
dw = tl & subL[9], /* FLinv(kl2) */
- tr = subR[7] ^ rol32(dw, 1);
+ tr = subR[7] ^ ROL1(dw);
SUBKEY_L(10) = tl ^ subL[11]; /* round 7 */
SUBKEY_R(10) = tr ^ subR[11];
SUBKEY_L(11) = subL[10] ^ subL[12]; /* round 8 */
SUBKEY_R(14) = subR[13] ^ subR[15];
tl = subL[18] ^ (subR[18] & ~subR[16]);
dw = tl & subL[16], /* FL(kl3) */
- tr = subR[18] ^ rol32(dw, 1);
+ tr = subR[18] ^ ROL1(dw);
SUBKEY_L(15) = subL[14] ^ tl; /* round 12 */
SUBKEY_R(15) = subR[14] ^ tr;
SUBKEY_L(16) = subL[16]; /* FL(kl3) */
SUBKEY_R(17) = subR[17];
tl = subL[15] ^ (subR[15] & ~subR[17]);
dw = tl & subL[17], /* FLinv(kl4) */
- tr = subR[15] ^ rol32(dw, 1);
+ tr = subR[15] ^ ROL1(dw);
SUBKEY_L(18) = tl ^ subL[19]; /* round 13 */
SUBKEY_R(18) = tr ^ subR[19];
SUBKEY_L(19) = subL[18] ^ subL[20]; /* round 14 */
} else {
tl = subL[26] ^ (subR[26] & ~subR[24]);
dw = tl & subL[24], /* FL(kl5) */
- tr = subR[26] ^ rol32(dw, 1);
+ tr = subR[26] ^ ROL1(dw);
SUBKEY_L(23) = subL[22] ^ tl; /* round 18 */
SUBKEY_R(23) = subR[22] ^ tr;
SUBKEY_L(24) = subL[24]; /* FL(kl5) */
SUBKEY_R(25) = subR[25];
tl = subL[23] ^ (subR[23] & ~subR[25]);
dw = tl & subL[25], /* FLinv(kl6) */
- tr = subR[23] ^ rol32(dw, 1);
+ tr = subR[23] ^ ROL1(dw);
SUBKEY_L(26) = tl ^ subL[27]; /* round 19 */
SUBKEY_R(26) = tr ^ subR[27];
SUBKEY_L(27) = subL[26] ^ subL[28]; /* round 20 */
/* apply the inverse of the last half of P-function */
i = 2;
do {
- dw = SUBKEY_L(i + 0) ^ SUBKEY_R(i + 0); dw = rol32(dw, 8);/* round 1 */
+ dw = SUBKEY_L(i + 0) ^ SUBKEY_R(i + 0); dw = ROL8(dw);/* round 1 */
SUBKEY_R(i + 0) = SUBKEY_L(i + 0) ^ dw; SUBKEY_L(i + 0) = dw;
- dw = SUBKEY_L(i + 1) ^ SUBKEY_R(i + 1); dw = rol32(dw, 8);/* round 2 */
+ dw = SUBKEY_L(i + 1) ^ SUBKEY_R(i + 1); dw = ROL8(dw);/* round 2 */
SUBKEY_R(i + 1) = SUBKEY_L(i + 1) ^ dw; SUBKEY_L(i + 1) = dw;
- dw = SUBKEY_L(i + 2) ^ SUBKEY_R(i + 2); dw = rol32(dw, 8);/* round 3 */
+ dw = SUBKEY_L(i + 2) ^ SUBKEY_R(i + 2); dw = ROL8(dw);/* round 3 */
SUBKEY_R(i + 2) = SUBKEY_L(i + 2) ^ dw; SUBKEY_L(i + 2) = dw;
- dw = SUBKEY_L(i + 3) ^ SUBKEY_R(i + 3); dw = rol32(dw, 8);/* round 4 */
+ dw = SUBKEY_L(i + 3) ^ SUBKEY_R(i + 3); dw = ROL8(dw);/* round 4 */
SUBKEY_R(i + 3) = SUBKEY_L(i + 3) ^ dw; SUBKEY_L(i + 3) = dw;
- dw = SUBKEY_L(i + 4) ^ SUBKEY_R(i + 4); dw = rol32(dw, 9);/* round 5 */
+ dw = SUBKEY_L(i + 4) ^ SUBKEY_R(i + 4); dw = ROL8(dw);/* round 5 */
SUBKEY_R(i + 4) = SUBKEY_L(i + 4) ^ dw; SUBKEY_L(i + 4) = dw;
- dw = SUBKEY_L(i + 5) ^ SUBKEY_R(i + 5); dw = rol32(dw, 8);/* round 6 */
+ dw = SUBKEY_L(i + 5) ^ SUBKEY_R(i + 5); dw = ROL8(dw);/* round 6 */
SUBKEY_R(i + 5) = SUBKEY_L(i + 5) ^ dw; SUBKEY_L(i + 5) = dw;
i += 8;
} while (i < max);
/**
* k == kll || klr || krl || krr (|| is concatenation)
*/
- kll = get_unaligned_be32(key);
- klr = get_unaligned_be32(key + 4);
- krl = get_unaligned_be32(key + 8);
- krr = get_unaligned_be32(key + 12);
+ GETU32(kll, key );
+ GETU32(klr, key + 4);
+ GETU32(krl, key + 8);
+ GETU32(krr, key + 12);
/* generate KL dependent subkeys */
/* kw1 */
* key = (kll || klr || krl || krr || krll || krlr || krrl || krrr)
* (|| is concatenation)
*/
- kll = get_unaligned_be32(key);
- klr = get_unaligned_be32(key + 4);
- krl = get_unaligned_be32(key + 8);
- krr = get_unaligned_be32(key + 12);
- krll = get_unaligned_be32(key + 16);
- krlr = get_unaligned_be32(key + 20);
- krrl = get_unaligned_be32(key + 24);
- krrr = get_unaligned_be32(key + 28);
+ GETU32(kll, key );
+ GETU32(klr, key + 4);
+ GETU32(krl, key + 8);
+ GETU32(krr, key + 12);
+ GETU32(krll, key + 16);
+ GETU32(krlr, key + 20);
+ GETU32(krrl, key + 24);
+ GETU32(krrr, key + 28);
/* generate KL dependent subkeys */
/* kw1 */
t0 &= ll; \
t2 |= rr; \
rl ^= t2; \
- lr ^= rol32(t0, 1); \
+ lr ^= ROL1(t0); \
t3 = krl; \
t1 = klr; \
t3 &= rl; \
t1 |= lr; \
ll ^= t1; \
- rr ^= rol32(t3, 1); \
+ rr ^= ROL1(t3); \
} while(0)
#define CAMELLIA_ROUNDSM(xl, xr, kl, kr, yl, yr, il, ir) \
il ^= kl; \
ir ^= il ^ kr; \
yl ^= ir; \
- yr ^= ror32(il, 8) ^ ir; \
+ yr ^= ROR8(il) ^ ir; \
} while(0)
/* max = 24: 128bit encrypt, max = 32: 256bit encrypt */
arg = arg->common.next;
}
- ACPI_ERROR((AE_INFO,
+ ACPI_WARNING((AE_INFO,
"Package List length (%X) larger than NumElements count (%X), truncated\n",
i, element_count));
} else if (i < element_count) {
{
set_no_mwait, "Extensa 5220", {
DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
- DMI_MATCH(DMI_SYS_VENDOR, "ACER"),
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
DMI_MATCH(DMI_PRODUCT_VERSION, "0100"),
DMI_MATCH(DMI_BOARD_NAME, "Columbia") }, NULL},
{},
* 1 -> ignore _PPC totally -> forced by user through boot param
*/
static int ignore_ppc = -1;
-module_param(ignore_ppc, uint, 0644);
+module_param(ignore_ppc, int, 0644);
MODULE_PARM_DESC(ignore_ppc, "If the frequency of your machine gets wrongly" \
"limited by BIOS, this should help");
if (wait_event_timeout(hc->wait, smb_check_done(hc),
msecs_to_jiffies(timeout)))
return 0;
+ /*
+ * After the timeout happens, OS will try to check the status of SMbus.
+ * If the status is what OS expected, it will be regarded as the bogus
+ * timeout.
+ */
+ if (smb_check_done(hc))
+ return 0;
else
return -ETIME;
}
static int __init acpi_parse_apic_instance(char *str)
{
+ if (!str)
+ return -EINVAL;
acpi_apic_instance = simple_strtoul(str, NULL, 0);
tristate "Marvell PATA support via legacy mode"
depends on PCI
help
- This option enables limited support for the Marvell 88SE6145 ATA
- controller.
+ This option enables limited support for the Marvell 88SE61xx ATA
+ controllers. If you wish to use only the SATA ports then select
+ the AHCI driver alone. If you wish to the use the PATA port or
+ both SATA and PATA include this driver.
If unsure, say N.
/* board_ahci_mv */
{
AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_MSI |
- AHCI_HFLAG_MV_PATA),
+ AHCI_HFLAG_MV_PATA | AHCI_HFLAG_NO_PMP),
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA,
.pio_mask = 0x1f, /* pio0-4 */
{ PCI_VDEVICE(INTEL, 0x3a05), board_ahci }, /* ICH10 */
{ PCI_VDEVICE(INTEL, 0x3a25), board_ahci }, /* ICH10 */
{ PCI_VDEVICE(INTEL, 0x3b24), board_ahci }, /* PCH RAID */
+ { PCI_VDEVICE(INTEL, 0x3b25), board_ahci }, /* PCH RAID */
{ PCI_VDEVICE(INTEL, 0x3b2b), board_ahci }, /* PCH RAID */
+ { PCI_VDEVICE(INTEL, 0x3b2c), board_ahci }, /* PCH RAID */
/* JMicron 360/1/3/5/6, match class to avoid IDE function */
{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
MODULE_PARM_DESC(ahci_em_messages,
"Set AHCI Enclosure Management Message type (0 = disabled, 1 = LED");
+#if defined(CONFIG_PATA_MARVELL) || defined(CONFIG_PATA_MARVELL_MODULE)
+static int marvell_enable;
+#else
+static int marvell_enable = 1;
+#endif
+module_param(marvell_enable, int, 0644);
+MODULE_PARM_DESC(marvell_enable, "Marvell SATA via AHCI (1 = enabled)");
+
+
static inline int ahci_nr_ports(u32 cap)
{
return (cap & 0x1f) + 1;
"MV_AHCI HACK: port_map %x -> %x\n",
port_map,
port_map & mv);
+ dev_printk(KERN_ERR, &pdev->dev,
+ "Disabling your PATA port. Use the boot option 'ahci.marvell_enable=0' to avoid this.\n");
port_map &= mv;
}
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
+ /* The AHCI driver can only drive the SATA ports, the PATA driver
+ can drive them all so if both drivers are selected make sure
+ AHCI stays out of the way */
+ if (pdev->vendor == PCI_VENDOR_ID_MARVELL && !marvell_enable)
+ return -ENODEV;
+
/* acquire resources */
rc = pcim_enable_device(pdev);
if (rc)
break;
case HSM_ST_ERR:
- /* make sure qc->err_mask is available to
- * know what's wrong and recover
- */
- WARN_ON(!(qc->err_mask & (AC_ERR_DEV | AC_ERR_HSM)));
-
ap->hsm_task_state = HSM_ST_IDLE;
/* complete taskfile transaction */
#include <linux/ata.h>
#define DRV_NAME "pata_marvell"
-#define DRV_VERSION "0.1.4"
+#define DRV_VERSION "0.1.6"
/**
- * marvell_pre_reset - check for 40/80 pin
- * @link: link
- * @deadline: deadline jiffies for the operation
+ * marvell_pata_active - check if PATA is active
+ * @pdev: PCI device
*
- * Perform the PATA port setup we need.
+ * Returns 1 if the PATA port may be active. We know how to check this
+ * for the 6145 but not the other devices
*/
-static int marvell_pre_reset(struct ata_link *link, unsigned long deadline)
+static int marvell_pata_active(struct pci_dev *pdev)
{
- struct ata_port *ap = link->ap;
- struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ int i;
u32 devices;
void __iomem *barp;
- int i;
- /* Check if our port is enabled */
+ /* We don't yet know how to do this for other devices */
+ if (pdev->device != 0x6145)
+ return 1;
barp = pci_iomap(pdev, 5, 0x10);
if (barp == NULL)
return -ENOMEM;
+
printk("BAR5:");
for(i = 0; i <= 0x0F; i++)
printk("%02X:%02X ", i, ioread8(barp + i));
devices = ioread32(barp + 0x0C);
pci_iounmap(pdev, barp);
- if ((pdev->device == 0x6145) && (ap->port_no == 0) &&
- (!(devices & 0x10))) /* PATA enable ? */
- return -ENOENT;
+ if (devices & 0x10)
+ return 1;
+ return 0;
+}
+
+/**
+ * marvell_pre_reset - check for 40/80 pin
+ * @link: link
+ * @deadline: deadline jiffies for the operation
+ *
+ * Perform the PATA port setup we need.
+ */
+
+static int marvell_pre_reset(struct ata_link *link, unsigned long deadline)
+{
+ struct ata_port *ap = link->ap;
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+
+ if (pdev->device == 0x6145 && ap->port_no == 0 &&
+ !marvell_pata_active(pdev)) /* PATA enable ? */
+ return -ENOENT;
return ata_sff_prereset(link, deadline);
}
if (pdev->device == 0x6101)
ppi[1] = &ata_dummy_port_info;
+#if defined(CONFIG_AHCI) || defined(CONFIG_AHCI_MODULE)
+ if (!marvell_pata_active(pdev)) {
+ printk(KERN_INFO DRV_NAME ": PATA port not active, deferring to AHCI driver.\n");
+ return -ENODEV;
+ }
+#endif
return ata_pci_sff_init_one(pdev, ppi, &marvell_sht, NULL);
}
/* Try to acquire MMIO resources and fallback to PIO if
* that fails
*/
- rc = pcim_enable_device(pdev);
- if (rc)
- return rc;
rc = pcim_iomap_regions(pdev, 1 << SIL680_MMIO_BAR, DRV_NAME);
if (rc)
goto use_ioports;
{ PCI_VDEVICE(MARVELL, 0x5041), chip_504x },
{ PCI_VDEVICE(MARVELL, 0x5080), chip_5080 },
{ PCI_VDEVICE(MARVELL, 0x5081), chip_508x },
- /* RocketRAID 1740/174x have different identifiers */
+ /* RocketRAID 1720/174x have different identifiers */
+ { PCI_VDEVICE(TTI, 0x1720), chip_6042 },
{ PCI_VDEVICE(TTI, 0x1740), chip_508x },
{ PCI_VDEVICE(TTI, 0x1742), chip_508x },
static void nv_nf2_thaw(struct ata_port *ap);
static void nv_ck804_freeze(struct ata_port *ap);
static void nv_ck804_thaw(struct ata_port *ap);
-static int nv_hardreset(struct ata_link *link, unsigned int *class,
- unsigned long deadline);
static int nv_adma_slave_config(struct scsi_device *sdev);
static int nv_adma_check_atapi_dma(struct ata_queued_cmd *qc);
static void nv_adma_qc_prep(struct ata_queued_cmd *qc);
static struct ata_port_operations nv_generic_ops = {
.inherits = &ata_bmdma_port_ops,
- .hardreset = nv_hardreset,
+ .hardreset = ATA_OP_NULL,
.scr_read = nv_scr_read,
.scr_write = nv_scr_write,
};
ata_sff_thaw(ap);
}
-static int nv_hardreset(struct ata_link *link, unsigned int *class,
- unsigned long deadline)
-{
- int rc;
-
- /* SATA hardreset fails to retrieve proper device signature on
- * some controllers. Request follow up SRST. For more info,
- * see http://bugzilla.kernel.org/show_bug.cgi?id=3352
- */
- rc = sata_sff_hardreset(link, class, deadline);
- if (rc)
- return rc;
- return -EAGAIN;
-}
-
static void nv_adma_error_handler(struct ata_port *ap)
{
struct nv_adma_port_priv *pp = ap->private_data;
/* read-write data: */
spinlock_t lock;
unsigned add_ptr;
- int entropy_count;
+ int entropy_count; /* Must at no time exceed ->POOLBITS! */
int input_rotate;
};
static void credit_entropy_bits(struct entropy_store *r, int nbits)
{
unsigned long flags;
+ int entropy_count;
if (!nbits)
return;
spin_lock_irqsave(&r->lock, flags);
DEBUG_ENT("added %d entropy credits to %s\n", nbits, r->name);
- r->entropy_count += nbits;
- if (r->entropy_count < 0) {
+ entropy_count = r->entropy_count;
+ entropy_count += nbits;
+ if (entropy_count < 0) {
DEBUG_ENT("negative entropy/overflow\n");
- r->entropy_count = 0;
- } else if (r->entropy_count > r->poolinfo->POOLBITS)
- r->entropy_count = r->poolinfo->POOLBITS;
+ entropy_count = 0;
+ } else if (entropy_count > r->poolinfo->POOLBITS)
+ entropy_count = r->poolinfo->POOLBITS;
+ r->entropy_count = entropy_count;
/* should we wake readers? */
- if (r == &input_pool &&
- r->entropy_count >= random_read_wakeup_thresh) {
+ if (r == &input_pool && entropy_count >= random_read_wakeup_thresh) {
wake_up_interruptible(&random_read_wait);
kill_fasync(&fasync, SIGIO, POLL_IN);
}
-
spin_unlock_irqrestore(&r->lock, flags);
}
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/pci.h>
+#include <linux/delay.h>
#include <asm/io.h>
/*
*/
static int verify_pmtmr_rate(void)
{
- u32 value1, value2;
+ cycle_t value1, value2;
unsigned long count, delta;
mach_prepare_counter();
- value1 = read_pmtmr();
+ value1 = clocksource_acpi_pm.read();
mach_countup(&count);
- value2 = read_pmtmr();
+ value2 = clocksource_acpi_pm.read();
delta = (value2 - value1) & ACPI_PM_MASK;
/* Check that the PMTMR delta is within 5% of what we expect */
#define verify_pmtmr_rate() (0)
#endif
+/* Number of monotonicity checks to perform during initialization */
+#define ACPI_PM_MONOTONICITY_CHECKS 10
+
static int __init init_acpi_pm_clocksource(void)
{
- u32 value1, value2;
- unsigned int i;
+ cycle_t value1, value2;
+ unsigned int i, j, good = 0;
if (!pmtmr_ioport)
return -ENODEV;
clocksource_acpi_pm.shift);
/* "verify" this timing source: */
- value1 = read_pmtmr();
- for (i = 0; i < 10000; i++) {
- value2 = read_pmtmr();
- if (value2 == value1)
- continue;
- if (value2 > value1)
- goto pm_good;
- if ((value2 < value1) && ((value2) < 0xFFF))
- goto pm_good;
- printk(KERN_INFO "PM-Timer had inconsistent results:"
- " 0x%#x, 0x%#x - aborting.\n", value1, value2);
- return -EINVAL;
+ for (j = 0; j < ACPI_PM_MONOTONICITY_CHECKS; j++) {
+ value1 = clocksource_acpi_pm.read();
+ for (i = 0; i < 10000; i++) {
+ value2 = clocksource_acpi_pm.read();
+ if (value2 == value1)
+ continue;
+ if (value2 > value1)
+ good++;
+ break;
+ if ((value2 < value1) && ((value2) < 0xFFF))
+ good++;
+ break;
+ printk(KERN_INFO "PM-Timer had inconsistent results:"
+ " 0x%#llx, 0x%#llx - aborting.\n",
+ value1, value2);
+ return -EINVAL;
+ }
+ udelay(300 * i);
+ }
+
+ if (good != ACPI_PM_MONOTONICITY_CHECKS) {
+ printk(KERN_INFO "PM-Timer failed consistency check "
+ " (0x%#llx) - aborting.\n", value1);
+ return -ENODEV;
}
- printk(KERN_INFO "PM-Timer had no reasonable result:"
- " 0x%#x - aborting.\n", value1);
- return -ENODEV;
-pm_good:
if (verify_pmtmr_rate() != 0)
return -ENODEV;
control = (void *)header + sizeof(*header);
end = (void *)control + control->hdr.length;
- eot_offset = (void *)header + header->length -
- (void *)control - sizeof(*header);
+ eot_offset = (void *)header + header->length - (void *)control;
rc = ibft_verify_hdr("control", (struct ibft_hdr *)control, id_control,
sizeof(*control));
return 0;
DRM_UDELAY(1);
}
- DRM_INFO("wait for fifo failed status : 0x%08X 0x%08X\n",
+ DRM_DEBUG("wait for fifo failed status : 0x%08X 0x%08X\n",
RADEON_READ(RADEON_RBBM_STATUS),
RADEON_READ(R300_VAP_CNTL_STATUS));
}
DRM_UDELAY(1);
}
- DRM_INFO("wait idle failed status : 0x%08X 0x%08X\n",
+ DRM_DEBUG("wait idle failed status : 0x%08X 0x%08X\n",
RADEON_READ(RADEON_RBBM_STATUS),
RADEON_READ(R300_VAP_CNTL_STATUS));
#include <linux/clk.h>
#include <linux/io.h>
+/* Transmit operation: */
+/* */
+/* 0 byte transmit */
+/* BUS: S A8 ACK P */
+/* IRQ: DTE WAIT */
+/* ICIC: */
+/* ICCR: 0x94 0x90 */
+/* ICDR: A8 */
+/* */
+/* 1 byte transmit */
+/* BUS: S A8 ACK D8(1) ACK P */
+/* IRQ: DTE WAIT WAIT */
+/* ICIC: -DTE */
+/* ICCR: 0x94 0x90 */
+/* ICDR: A8 D8(1) */
+/* */
+/* 2 byte transmit */
+/* BUS: S A8 ACK D8(1) ACK D8(2) ACK P */
+/* IRQ: DTE WAIT WAIT WAIT */
+/* ICIC: -DTE */
+/* ICCR: 0x94 0x90 */
+/* ICDR: A8 D8(1) D8(2) */
+/* */
+/* 3 bytes or more, +---------+ gets repeated */
+/* */
+/* */
+/* Receive operation: */
+/* */
+/* 0 byte receive - not supported since slave may hold SDA low */
+/* */
+/* 1 byte receive [TX] | [RX] */
+/* BUS: S A8 ACK | D8(1) ACK P */
+/* IRQ: DTE WAIT | WAIT DTE */
+/* ICIC: -DTE | +DTE */
+/* ICCR: 0x94 0x81 | 0xc0 */
+/* ICDR: A8 | D8(1) */
+/* */
+/* 2 byte receive [TX]| [RX] */
+/* BUS: S A8 ACK | D8(1) ACK D8(2) ACK P */
+/* IRQ: DTE WAIT | WAIT WAIT DTE */
+/* ICIC: -DTE | +DTE */
+/* ICCR: 0x94 0x81 | 0xc0 */
+/* ICDR: A8 | D8(1) D8(2) */
+/* */
+/* 3 byte receive [TX] | [RX] */
+/* BUS: S A8 ACK | D8(1) ACK D8(2) ACK D8(3) ACK P */
+/* IRQ: DTE WAIT | WAIT WAIT WAIT DTE */
+/* ICIC: -DTE | +DTE */
+/* ICCR: 0x94 0x81 | 0xc0 */
+/* ICDR: A8 | D8(1) D8(2) D8(3) */
+/* */
+/* 4 bytes or more, this part is repeated +---------+ */
+/* */
+/* */
+/* Interrupt order and BUSY flag */
+/* ___ _ */
+/* SDA ___\___XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXAAAAAAAAA___/ */
+/* SCL \_/1\_/2\_/3\_/4\_/5\_/6\_/7\_/8\___/9\_____/ */
+/* */
+/* S D7 D6 D5 D4 D3 D2 D1 D0 P */
+/* ___ */
+/* WAIT IRQ ________________________________/ \___________ */
+/* TACK IRQ ____________________________________/ \_______ */
+/* DTE IRQ __________________________________________/ \_ */
+/* AL IRQ XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX */
+/* _______________________________________________ */
+/* BUSY __/ \_ */
+/* */
+
enum sh_mobile_i2c_op {
OP_START = 0,
- OP_TX_ONLY,
+ OP_TX_FIRST,
+ OP_TX,
OP_TX_STOP,
OP_TX_TO_RX,
- OP_RX_ONLY,
+ OP_RX,
OP_RX_STOP,
+ OP_RX_STOP_DATA,
};
struct sh_mobile_i2c_data {
spin_lock_irqsave(&pd->lock, flags);
switch (op) {
- case OP_START:
+ case OP_START: /* issue start and trigger DTE interrupt */
iowrite8(0x94, ICCR(pd));
break;
- case OP_TX_ONLY:
+ case OP_TX_FIRST: /* disable DTE interrupt and write data */
+ iowrite8(ICIC_WAITE | ICIC_ALE | ICIC_TACKE, ICIC(pd));
iowrite8(data, ICDR(pd));
break;
- case OP_TX_STOP:
+ case OP_TX: /* write data */
iowrite8(data, ICDR(pd));
- iowrite8(0x90, ICCR(pd));
- iowrite8(ICIC_ALE | ICIC_TACKE, ICIC(pd));
break;
- case OP_TX_TO_RX:
+ case OP_TX_STOP: /* write data and issue a stop afterwards */
iowrite8(data, ICDR(pd));
+ iowrite8(0x90, ICCR(pd));
+ break;
+ case OP_TX_TO_RX: /* select read mode */
iowrite8(0x81, ICCR(pd));
break;
- case OP_RX_ONLY:
+ case OP_RX: /* just read data */
ret = ioread8(ICDR(pd));
break;
- case OP_RX_STOP:
+ case OP_RX_STOP: /* enable DTE interrupt, issue stop */
+ iowrite8(ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE,
+ ICIC(pd));
+ iowrite8(0xc0, ICCR(pd));
+ break;
+ case OP_RX_STOP_DATA: /* enable DTE interrupt, read data, issue stop */
+ iowrite8(ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE,
+ ICIC(pd));
ret = ioread8(ICDR(pd));
iowrite8(0xc0, ICCR(pd));
break;
return ret;
}
+static int sh_mobile_i2c_is_first_byte(struct sh_mobile_i2c_data *pd)
+{
+ if (pd->pos == -1)
+ return 1;
+
+ return 0;
+}
+
+static int sh_mobile_i2c_is_last_byte(struct sh_mobile_i2c_data *pd)
+{
+ if (pd->pos == (pd->msg->len - 1))
+ return 1;
+
+ return 0;
+}
+
+static void sh_mobile_i2c_get_data(struct sh_mobile_i2c_data *pd,
+ unsigned char *buf)
+{
+ switch (pd->pos) {
+ case -1:
+ *buf = (pd->msg->addr & 0x7f) << 1;
+ *buf |= (pd->msg->flags & I2C_M_RD) ? 1 : 0;
+ break;
+ default:
+ *buf = pd->msg->buf[pd->pos];
+ }
+}
+
+static int sh_mobile_i2c_isr_tx(struct sh_mobile_i2c_data *pd)
+{
+ unsigned char data;
+
+ if (pd->pos == pd->msg->len)
+ return 1;
+
+ sh_mobile_i2c_get_data(pd, &data);
+
+ if (sh_mobile_i2c_is_last_byte(pd))
+ i2c_op(pd, OP_TX_STOP, data);
+ else if (sh_mobile_i2c_is_first_byte(pd))
+ i2c_op(pd, OP_TX_FIRST, data);
+ else
+ i2c_op(pd, OP_TX, data);
+
+ pd->pos++;
+ return 0;
+}
+
+static int sh_mobile_i2c_isr_rx(struct sh_mobile_i2c_data *pd)
+{
+ unsigned char data;
+ int real_pos;
+
+ do {
+ if (pd->pos <= -1) {
+ sh_mobile_i2c_get_data(pd, &data);
+
+ if (sh_mobile_i2c_is_first_byte(pd))
+ i2c_op(pd, OP_TX_FIRST, data);
+ else
+ i2c_op(pd, OP_TX, data);
+ break;
+ }
+
+ if (pd->pos == 0) {
+ i2c_op(pd, OP_TX_TO_RX, 0);
+ break;
+ }
+
+ real_pos = pd->pos - 2;
+
+ if (pd->pos == pd->msg->len) {
+ if (real_pos < 0) {
+ i2c_op(pd, OP_RX_STOP, 0);
+ break;
+ }
+ data = i2c_op(pd, OP_RX_STOP_DATA, 0);
+ } else
+ data = i2c_op(pd, OP_RX, 0);
+
+ pd->msg->buf[real_pos] = data;
+ } while (0);
+
+ pd->pos++;
+ return pd->pos == (pd->msg->len + 2);
+}
+
static irqreturn_t sh_mobile_i2c_isr(int irq, void *dev_id)
{
struct platform_device *dev = dev_id;
struct sh_mobile_i2c_data *pd = platform_get_drvdata(dev);
- struct i2c_msg *msg = pd->msg;
- unsigned char data, sr;
- int wakeup = 0;
+ unsigned char sr;
+ int wakeup;
sr = ioread8(ICSR(pd));
- pd->sr |= sr;
+ pd->sr |= sr; /* remember state */
dev_dbg(pd->dev, "i2c_isr 0x%02x 0x%02x %s %d %d!\n", sr, pd->sr,
- (msg->flags & I2C_M_RD) ? "read" : "write",
- pd->pos, msg->len);
+ (pd->msg->flags & I2C_M_RD) ? "read" : "write",
+ pd->pos, pd->msg->len);
if (sr & (ICSR_AL | ICSR_TACK)) {
- iowrite8(0, ICIC(pd)); /* disable interrupts */
- wakeup = 1;
- goto do_wakeup;
- }
+ /* don't interrupt transaction - continue to issue stop */
+ iowrite8(sr & ~(ICSR_AL | ICSR_TACK), ICSR(pd));
+ wakeup = 0;
+ } else if (pd->msg->flags & I2C_M_RD)
+ wakeup = sh_mobile_i2c_isr_rx(pd);
+ else
+ wakeup = sh_mobile_i2c_isr_tx(pd);
- if (pd->pos == msg->len) {
- i2c_op(pd, OP_RX_ONLY, 0);
- wakeup = 1;
- goto do_wakeup;
- }
+ if (sr & ICSR_WAIT) /* TODO: add delay here to support slow acks */
+ iowrite8(sr & ~ICSR_WAIT, ICSR(pd));
- if (pd->pos == -1) {
- data = (msg->addr & 0x7f) << 1;
- data |= (msg->flags & I2C_M_RD) ? 1 : 0;
- } else
- data = msg->buf[pd->pos];
-
- if ((pd->pos == -1) || !(msg->flags & I2C_M_RD)) {
- if (msg->flags & I2C_M_RD)
- i2c_op(pd, OP_TX_TO_RX, data);
- else if (pd->pos == (msg->len - 1)) {
- i2c_op(pd, OP_TX_STOP, data);
- wakeup = 1;
- } else
- i2c_op(pd, OP_TX_ONLY, data);
- } else {
- if (pd->pos == (msg->len - 1))
- data = i2c_op(pd, OP_RX_STOP, 0);
- else
- data = i2c_op(pd, OP_RX_ONLY, 0);
-
- msg->buf[pd->pos] = data;
- }
- pd->pos++;
-
- do_wakeup:
if (wakeup) {
pd->sr |= SW_DONE;
wake_up(&pd->wait);
static int start_ch(struct sh_mobile_i2c_data *pd, struct i2c_msg *usr_msg)
{
+ if (usr_msg->len == 0 && (usr_msg->flags & I2C_M_RD)) {
+ dev_err(pd->dev, "Unsupported zero length i2c read\n");
+ return -EIO;
+ }
+
/* Initialize channel registers */
iowrite8(ioread8(ICCR(pd)) & ~ICCR_ICE, ICCR(pd));
pd->pos = -1;
pd->sr = 0;
- /* Enable all interrupts except wait */
- iowrite8(ioread8(ICIC(pd)) | ICIC_ALE | ICIC_TACKE | ICIC_DTEE,
- ICIC(pd));
+ /* Enable all interrupts to begin with */
+ iowrite8(ICIC_WAITE | ICIC_ALE | ICIC_TACKE | ICIC_DTEE, ICIC(pd));
return 0;
}
if (!k)
dev_err(pd->dev, "Transfer request timed out\n");
- retry_count = 10;
+ retry_count = 1000;
again:
val = ioread8(ICSR(pd));
dev_dbg(pd->dev, "val 0x%02x pd->sr 0x%02x\n", val, pd->sr);
- if ((val | pd->sr) & (ICSR_TACK | ICSR_AL)) {
- err = -EIO;
- break;
- }
-
/* the interrupt handler may wake us up before the
* transfer is finished, so poll the hardware
* until we're done.
*/
-
- if (!(!(val & ICSR_BUSY) && (val & ICSR_SCLM) &&
- (val & ICSR_SDAM))) {
- msleep(1);
+ if (val & ICSR_BUSY) {
+ udelay(10);
if (retry_count--)
goto again;
dev_err(pd->dev, "Polling timed out\n");
break;
}
+
+ /* handle missing acknowledge and arbitration lost */
+ if ((val | pd->sr) & (ICSR_TACK | ICSR_AL)) {
+ err = -EIO;
+ break;
+ }
}
deactivate_ch(pd);
module will be called ide-floppy.
config BLK_DEV_IDESCSI
- tristate "SCSI emulation support"
+ tristate "SCSI emulation support (DEPRECATED)"
depends on SCSI
select IDE_ATAPI
---help---
and will allow you to use a SCSI device driver instead of a native
ATAPI driver.
- This is useful if you have an ATAPI device for which no native
- driver has been written (for example, an ATAPI PD-CD drive);
- you can then use this emulation together with an appropriate SCSI
- device driver. In order to do this, say Y here and to "SCSI support"
- and "SCSI generic support", below. You must then provide the kernel
- command line "hdx=ide-scsi" (try "man bootparam" or see the
- documentation of your boot loader (lilo or loadlin) about how to
- pass options to the kernel at boot time) for devices if you want the
- native EIDE sub-drivers to skip over the native support, so that
- this SCSI emulation can be used instead.
-
- Note that this option does NOT allow you to attach SCSI devices to a
- box that doesn't have a SCSI host adapter installed.
-
If both this SCSI emulation and native ATAPI support are compiled
into the kernel, the native support will be used.
.mwdma_mask = ATA_MWDMA2,
};
-static int __devinit palm_bk3710_probe(struct platform_device *pdev)
+static int __init palm_bk3710_probe(struct platform_device *pdev)
{
struct clk *clk;
struct resource *mem, *irq;
- struct ide_host *host;
unsigned long base, rate;
int i, rc;
hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
hw.io_ports_array[i] = base + IDE_PALM_ATA_PRI_REG_OFFSET + i;
hw.io_ports.ctl_addr = base + IDE_PALM_ATA_PRI_CTL_OFFSET;
hw.irq = irq->start;
+ hw.dev = &pdev->dev;
hw.chipset = ide_palm3710;
palm_bk3710_port_info.udma_mask = rate < 100000000 ? ATA_UDMA4 :
.name = "palm_bk3710",
.owner = THIS_MODULE,
},
- .probe = palm_bk3710_probe,
- .remove = NULL,
};
static int __init palm_bk3710_init(void)
{
- return platform_driver_register(&platform_bk_driver);
+ return platform_driver_probe(&platform_bk_driver, palm_bk3710_probe);
}
module_init(palm_bk3710_init);
ide_proc_unregister_driver(drive, info->driver);
+ blk_unregister_filter(info->disk);
del_gendisk(info->disk);
ide_cd_put(info);
g->fops = &idecd_ops;
g->flags |= GENHD_FL_REMOVABLE;
add_disk(g);
+ blk_register_filter(g);
return 0;
out_free_cd:
}
}
-/*
- * Compute drive->capacity, the full capacity of the drive
- * Called with drive->id != NULL.
- *
- * To compute capacity, this uses either of
- *
- * 1. CHS value set by user (whatever user sets will be trusted)
- * 2. LBA value from target drive (require new ATA feature)
- * 3. LBA value from system BIOS (new one is OK, old one may break)
- * 4. CHS value from system BIOS (traditional style)
- *
- * in above order (i.e., if value of higher priority is available,
- * reset will be ignored).
- */
static void init_idedisk_capacity(ide_drive_t *drive)
{
struct hd_driveid *id = drive->id;
return 0;
}
+static struct hpt_info *hpt3xx_get_info(struct device *dev)
+{
+ struct ide_host *host = dev_get_drvdata(dev);
+ struct hpt_info *info = (struct hpt_info *)host->host_priv;
+
+ return dev == host->dev[1] ? info + 1 : info;
+}
+
/*
* The Marvell bridge chips used on the HighPoint SATA cards do not seem
* to support the UltraDMA modes 1, 2, and 3 as well as any MWDMA modes...
static u8 hpt3xx_udma_filter(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct ide_host *host = pci_get_drvdata(dev);
- struct hpt_info *info = host->host_priv + (hwif->dev == host->dev[1]);
+ struct hpt_info *info = hpt3xx_get_info(hwif->dev);
u8 mask = hwif->ultra_mask;
switch (info->chip_type) {
static u8 hpt3xx_mdma_filter(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct ide_host *host = pci_get_drvdata(dev);
- struct hpt_info *info = host->host_priv + (hwif->dev == host->dev[1]);
+ struct hpt_info *info = hpt3xx_get_info(hwif->dev);
switch (info->chip_type) {
case HPT372 :
{
ide_hwif_t *hwif = drive->hwif;
struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct ide_host *host = pci_get_drvdata(dev);
- struct hpt_info *info = host->host_priv + (hwif->dev == host->dev[1]);
+ struct hpt_info *info = hpt3xx_get_info(hwif->dev);
struct hpt_timings *t = info->timings;
u8 itr_addr = 0x40 + (drive->dn * 4);
u32 old_itr = 0;
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct ide_host *host = pci_get_drvdata(dev);
- struct hpt_info *info = host->host_priv + (hwif->dev == host->dev[1]);
+ struct hpt_info *info = hpt3xx_get_info(hwif->dev);
if (drive->quirk_list) {
if (info->chip_type >= HPT370) {
static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev)
{
unsigned long io_base = pci_resource_start(dev, 4);
- struct ide_host *host = pci_get_drvdata(dev);
- struct hpt_info *info = host->host_priv + (&dev->dev == host->dev[1]);
+ struct hpt_info *info = hpt3xx_get_info(&dev->dev);
const char *name = DRV_NAME;
u8 pci_clk, dpll_clk = 0; /* PCI and DPLL clock in MHz */
u8 chip_type;
static u8 hpt3xx_cable_detect(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct ide_host *host = pci_get_drvdata(dev);
- struct hpt_info *info = host->host_priv + (hwif->dev == host->dev[1]);
+ struct hpt_info *info = hpt3xx_get_info(hwif->dev);
u8 chip_type = info->chip_type;
u8 scr1 = 0, ata66 = hwif->channel ? 0x01 : 0x02;
static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct ide_host *host = pci_get_drvdata(dev);
- struct hpt_info *info = host->host_priv + (hwif->dev == host->dev[1]);
+ struct hpt_info *info = hpt3xx_get_info(hwif->dev);
int serialize = HPT_SERIALIZE_IO;
u8 chip_type = info->chip_type;
u8 new_mcr, old_mcr = 0;
}
/* table of devices that work with this driver */
-static const struct usb_device_id bcm5974_table [] = {
+static const struct usb_device_id bcm5974_table[] = {
/* MacbookAir1.1 */
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING_ANSI),
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING_ISO),
/* trackpad finger structure */
struct tp_finger {
- __le16 origin; /* left/right origin? */
+ __le16 origin; /* zero when switching track finger */
__le16 abs_x; /* absolute x coodinate */
__le16 abs_y; /* absolute y coodinate */
__le16 rel_x; /* relative x coodinate */
struct bt_data *bt_data; /* button transferred data */
struct urb *tp_urb; /* trackpad usb request block */
struct tp_data *tp_data; /* trackpad transferred data */
+ int fingers; /* number of fingers on trackpad */
};
/* logical dimensions */
#define SN_WIDTH 100 /* width signal-to-noise ratio */
#define SN_COORD 250 /* coordinate signal-to-noise ratio */
+/* pressure thresholds */
+#define PRESSURE_LOW (2 * DIM_PRESSURE / SN_PRESSURE)
+#define PRESSURE_HIGH (3 * PRESSURE_LOW)
+
/* device constants */
static const struct bcm5974_config bcm5974_config_table[] = {
{
0, cfg->y.dim, cfg->y.fuzz, 0);
__set_bit(EV_KEY, input_dev->evbit);
+ __set_bit(BTN_TOUCH, input_dev->keybit);
__set_bit(BTN_TOOL_FINGER, input_dev->keybit);
__set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
__set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit);
const struct tp_finger *f = dev->tp_data->finger;
struct input_dev *input = dev->input;
const int fingers = (size - 26) / 28;
- int p = 0, w, x, y, n = 0;
+ int raw_p, raw_w, raw_x, raw_y;
+ int ptest = 0, origin = 0, nmin = 0, nmax = 0;
+ int abs_p = 0, abs_w = 0, abs_x = 0, abs_y = 0;
if (size < 26 || (size - 26) % 28 != 0)
return -EIO;
+ /* always track the first finger; when detached, start over */
if (fingers) {
- p = raw2int(f->force_major);
- w = raw2int(f->size_major);
- x = raw2int(f->abs_x);
- y = raw2int(f->abs_y);
- n = p > 0 ? fingers : 0;
+ raw_p = raw2int(f->force_major);
+ raw_w = raw2int(f->size_major);
+ raw_x = raw2int(f->abs_x);
+ raw_y = raw2int(f->abs_y);
dprintk(9,
- "bcm5974: p: %+05d w: %+05d x: %+05d y: %+05d n: %d\n",
- p, w, x, y, n);
+ "bcm5974: raw: p: %+05d w: %+05d x: %+05d y: %+05d\n",
+ raw_p, raw_w, raw_x, raw_y);
+
+ ptest = int2bound(&c->p, raw_p);
+ origin = raw2int(f->origin);
+ }
- input_report_abs(input, ABS_TOOL_WIDTH, int2bound(&c->w, w));
- input_report_abs(input, ABS_X, int2bound(&c->x, x - c->x.devmin));
- input_report_abs(input, ABS_Y, int2bound(&c->y, c->y.devmax - y));
+ /* while tracking finger still valid, count all fingers */
+ if (ptest > PRESSURE_LOW && origin) {
+ abs_p = ptest;
+ abs_w = int2bound(&c->w, raw_w);
+ abs_x = int2bound(&c->x, raw_x - c->x.devmin);
+ abs_y = int2bound(&c->y, c->y.devmax - raw_y);
+ for (; f != dev->tp_data->finger + fingers; f++) {
+ ptest = int2bound(&c->p, raw2int(f->force_major));
+ if (ptest > PRESSURE_LOW)
+ nmax++;
+ if (ptest > PRESSURE_HIGH)
+ nmin++;
+ }
}
- input_report_abs(input, ABS_PRESSURE, int2bound(&c->p, p));
+ if (dev->fingers < nmin)
+ dev->fingers = nmin;
+ if (dev->fingers > nmax)
+ dev->fingers = nmax;
+
+ input_report_key(input, BTN_TOUCH, dev->fingers > 0);
+ input_report_key(input, BTN_TOOL_FINGER, dev->fingers == 1);
+ input_report_key(input, BTN_TOOL_DOUBLETAP, dev->fingers == 2);
+ input_report_key(input, BTN_TOOL_TRIPLETAP, dev->fingers > 2);
- input_report_key(input, BTN_TOOL_FINGER, n == 1);
- input_report_key(input, BTN_TOOL_DOUBLETAP, n == 2);
- input_report_key(input, BTN_TOOL_TRIPLETAP, n > 2);
+ input_report_abs(input, ABS_PRESSURE, abs_p);
+ input_report_abs(input, ABS_TOOL_WIDTH, abs_w);
+
+ if (abs_p) {
+ input_report_abs(input, ABS_X, abs_x);
+ input_report_abs(input, ABS_Y, abs_y);
+
+ dprintk(8,
+ "bcm5974: abs: p: %+05d w: %+05d x: %+05d y: %+05d "
+ "nmin: %d nmax: %d n: %d\n",
+ abs_p, abs_w, abs_x, abs_y, nmin, nmax, dev->fingers);
+
+ }
input_sync(input);
.ident = "Lenovo 3000 n100",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
- DMI_MATCH(DMI_PRODUCT_VERSION, "3000 N100"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "076804U"),
},
},
{
}
+static mdk_rdev_t *next_active_rdev(mdk_rdev_t *rdev, mddev_t *mddev)
+{
+ /* Iterate the disks of an mddev, using rcu to protect access to the
+ * linked list, and raising the refcount of devices we return to ensure
+ * they don't disappear while in use.
+ * As devices are only added or removed when raid_disk is < 0 and
+ * nr_pending is 0 and In_sync is clear, the entries we return will
+ * still be in the same position on the list when we re-enter
+ * list_for_each_continue_rcu.
+ */
+ struct list_head *pos;
+ rcu_read_lock();
+ if (rdev == NULL)
+ /* start at the beginning */
+ pos = &mddev->disks;
+ else {
+ /* release the previous rdev and start from there. */
+ rdev_dec_pending(rdev, mddev);
+ pos = &rdev->same_set;
+ }
+ list_for_each_continue_rcu(pos, &mddev->disks) {
+ rdev = list_entry(pos, mdk_rdev_t, same_set);
+ if (rdev->raid_disk >= 0 &&
+ test_bit(In_sync, &rdev->flags) &&
+ !test_bit(Faulty, &rdev->flags)) {
+ /* this is a usable devices */
+ atomic_inc(&rdev->nr_pending);
+ rcu_read_unlock();
+ return rdev;
+ }
+ }
+ rcu_read_unlock();
+ return NULL;
+}
+
static int write_sb_page(struct bitmap *bitmap, struct page *page, int wait)
{
- mdk_rdev_t *rdev;
+ mdk_rdev_t *rdev = NULL;
mddev_t *mddev = bitmap->mddev;
- rcu_read_lock();
- rdev_for_each_rcu(rdev, mddev)
- if (test_bit(In_sync, &rdev->flags)
- && !test_bit(Faulty, &rdev->flags)) {
+ while ((rdev = next_active_rdev(rdev, mddev)) != NULL) {
int size = PAGE_SIZE;
if (page->index == bitmap->file_pages-1)
size = roundup(bitmap->last_page_size,
+ page->index * (PAGE_SIZE/512),
size,
page);
- }
- rcu_read_unlock();
+ }
if (wait)
md_super_wait(mddev);
del_timer_sync(&mddev->safemode_timer);
- invalidate_partition(disk, 0);
-
switch(mode) {
case 1: /* readonly */
err = -ENXIO;
{
v4l2_std_id *id = arg;
int found = 0;
- int i, err;
+ int i;
DEB_EE(("VIDIOC_S_STD\n"));
case VIDIOC_OVERLAY:
{
int on = *(int *)arg;
- int err = 0;
DEB_D(("VIDIOC_OVERLAY on:%d\n",on));
if (on != 0) {
case VIDIOCGMBUF:
{
struct video_mbuf *mbuf = arg;
- struct videobuf_queue *q;
int i;
/* fixme: number of capture buffers and sizes for v4l apps */
/*
* Driver for Microtune MT2131 "QAM/8VSB single chip tuner"
*
- * Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
/*
* Driver for Microtune MT2131 "QAM/8VSB single chip tuner"
*
- * Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
/*
* Driver for Microtune MT2131 "QAM/8VSB single chip tuner"
*
- * Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
MaxLinear MXL5005S VSB/QAM/DVBT tuner driver
Copyright (C) 2008 MaxLinear
- Copyright (C) 2006 Steven Toth <stoth@hauppauge.com>
+ Copyright (C) 2006 Steven Toth <stoth@linuxtv.org>
Functions:
mxl5005s_reset()
mxl5005s_writereg()
/* ----------------------------------------------------------------
* Begin: Everything after here is new code to adapt the
* proprietary Realtek driver into a Linux API tuner.
- * Copyright (C) 2008 Steven Toth <stoth@hauppauge.com>
+ * Copyright (C) 2008 Steven Toth <stoth@linuxtv.org>
*/
static int mxl5005s_reset(struct dvb_frontend *fe)
{
MaxLinear MXL5005S VSB/QAM/DVBT tuner driver
Copyright (C) 2008 MaxLinear
- Copyright (C) 2008 Steven Toth <stoth@hauppauge.com>
+ Copyright (C) 2008 Steven Toth <stoth@linuxtv.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
static int simple_config_lookup(struct dvb_frontend *fe,
struct tuner_params *t_params,
- int *frequency, u8 *config, u8 *cb)
+ unsigned *frequency, u8 *config, u8 *cb)
{
struct tuner_simple_priv *priv = fe->tuner_priv;
int i;
priv->last_div = div;
if (t_params->has_tda9887) {
struct v4l2_priv_tun_config tda9887_cfg;
- int config = 0;
+ int tda_config = 0;
int is_secam_l = (params->std & (V4L2_STD_SECAM_L |
V4L2_STD_SECAM_LC)) &&
!(params->std & ~(V4L2_STD_SECAM_L |
V4L2_STD_SECAM_LC));
tda9887_cfg.tuner = TUNER_TDA9887;
- tda9887_cfg.priv = &config;
+ tda9887_cfg.priv = &tda_config;
if (params->std == V4L2_STD_SECAM_LC) {
if (t_params->port1_active ^ t_params->port1_invert_for_secam_lc)
- config |= TDA9887_PORT1_ACTIVE;
+ tda_config |= TDA9887_PORT1_ACTIVE;
if (t_params->port2_active ^ t_params->port2_invert_for_secam_lc)
- config |= TDA9887_PORT2_ACTIVE;
+ tda_config |= TDA9887_PORT2_ACTIVE;
} else {
if (t_params->port1_active)
- config |= TDA9887_PORT1_ACTIVE;
+ tda_config |= TDA9887_PORT1_ACTIVE;
if (t_params->port2_active)
- config |= TDA9887_PORT2_ACTIVE;
+ tda_config |= TDA9887_PORT2_ACTIVE;
}
if (t_params->intercarrier_mode)
- config |= TDA9887_INTERCARRIER;
+ tda_config |= TDA9887_INTERCARRIER;
if (is_secam_l) {
if (i == 0 && t_params->default_top_secam_low)
- config |= TDA9887_TOP(t_params->default_top_secam_low);
+ tda_config |= TDA9887_TOP(t_params->default_top_secam_low);
else if (i == 1 && t_params->default_top_secam_mid)
- config |= TDA9887_TOP(t_params->default_top_secam_mid);
+ tda_config |= TDA9887_TOP(t_params->default_top_secam_mid);
else if (t_params->default_top_secam_high)
- config |= TDA9887_TOP(t_params->default_top_secam_high);
+ tda_config |= TDA9887_TOP(t_params->default_top_secam_high);
} else {
if (i == 0 && t_params->default_top_low)
- config |= TDA9887_TOP(t_params->default_top_low);
+ tda_config |= TDA9887_TOP(t_params->default_top_low);
else if (i == 1 && t_params->default_top_mid)
- config |= TDA9887_TOP(t_params->default_top_mid);
+ tda_config |= TDA9887_TOP(t_params->default_top_mid);
else if (t_params->default_top_high)
- config |= TDA9887_TOP(t_params->default_top_high);
+ tda_config |= TDA9887_TOP(t_params->default_top_high);
}
if (t_params->default_pll_gating_18)
- config |= TDA9887_GATING_18;
+ tda_config |= TDA9887_GATING_18;
i2c_clients_command(priv->i2c_props.adap, TUNER_SET_CONFIG,
&tda9887_cfg);
}
static struct tuner_params *t_params;
u8 config, cb;
u32 div;
- int ret, frequency = params->frequency / 62500;
+ int ret;
+ unsigned frequency = params->frequency / 62500;
t_params = simple_tuner_params(fe, TUNER_PARAM_TYPE_DIGITAL);
ret = simple_config_lookup(fe, t_params, &frequency, &config, &cb);
* Driver for Xceive XC5000 "QAM/8VSB single chip tuner"
*
* Copyright (c) 2007 Xceive Corporation
- * Copyright (c) 2007 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2007 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
/*
* Driver for Xceive XC5000 "QAM/8VSB single chip tuner"
*
- * Copyright (c) 2007 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2007 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
/*
* Driver for Xceive XC5000 "QAM/8VSB single chip tuner"
*
- * Copyright (c) 2007 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2007 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
flexcop_diseqc_send_byte(fe, 0xff);
else {
flexcop_set_tone(fe, SEC_TONE_ON);
- udelay(12500);
+ mdelay(12);
+ udelay(500);
flexcop_set_tone(fe, SEC_TONE_OFF);
}
msleep(20);
fc->fc_i2c_adap[1].port = FC_I2C_PORT_EEPROM;
fc->fc_i2c_adap[2].port = FC_I2C_PORT_TUNER;
- strncpy(fc->fc_i2c_adap[0].i2c_adap.name,
- "B2C2 FlexCop I2C to demod", I2C_NAME_SIZE);
- strncpy(fc->fc_i2c_adap[1].i2c_adap.name,
- "B2C2 FlexCop I2C to eeprom", I2C_NAME_SIZE);
- strncpy(fc->fc_i2c_adap[2].i2c_adap.name,
- "B2C2 FlexCop I2C to tuner", I2C_NAME_SIZE);
+ strlcpy(fc->fc_i2c_adap[0].i2c_adap.name, "B2C2 FlexCop I2C to demod",
+ sizeof(fc->fc_i2c_adap[0].i2c_adap.name));
+ strlcpy(fc->fc_i2c_adap[1].i2c_adap.name, "B2C2 FlexCop I2C to eeprom",
+ sizeof(fc->fc_i2c_adap[1].i2c_adap.name));
+ strlcpy(fc->fc_i2c_adap[2].i2c_adap.name, "B2C2 FlexCop I2C to tuner",
+ sizeof(fc->fc_i2c_adap[2].i2c_adap.name));
i2c_set_adapdata(&fc->fc_i2c_adap[0].i2c_adap, &fc->fc_i2c_adap[0]);
i2c_set_adapdata(&fc->fc_i2c_adap[1].i2c_adap, &fc->fc_i2c_adap[1]);
goto error;
}
if (state->type_flags & DST_TYPE_HAS_FW_1)
- udelay(3000);
+ mdelay(3);
if (read_dst(state, &reply, GET_ACK)) {
dprintk(verbose, DST_DEBUG, 1, "Trying to recover.. ");
if ((dst_error_recovery(state)) < 0) {
if (len >= 2 && data[0] == 0 && (data[1] == 1 || data[1] == 3))
goto error;
if (state->type_flags & DST_TYPE_HAS_FW_1)
- udelay(3000);
+ mdelay(3);
else
udelay(2000);
if (!dst_wait_dst_ready(state, NO_DELAY))
struct timespec timeout = { 0 };
struct dmx_pes_filter_params *para = &filter->params.pes;
dmx_output_t otype;
- int ret;
int ts_type;
enum dmx_ts_pes ts_pes;
struct dmx_ts_feed **tsfeed = &filter->feed.ts;
/* we need this extra check for annoying interfaces like the budget-av */
if ((!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE)) &&
(ca->pub->poll_slot_status)) {
- int status = ca->pub->poll_slot_status(ca->pub, slot, 0);
+ status = ca->pub->poll_slot_status(ca->pub, slot, 0);
if (!(status & DVB_CA_EN50221_POLL_CAM_PRESENT)) {
ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_NONE;
dvb_ca_en50221_thread_update_delay(ca);
/* we need this extra check for annoying interfaces like the budget-av */
if ((!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE)) &&
(ca->pub->poll_slot_status)) {
- int status = ca->pub->poll_slot_status(ca->pub, slot, 0);
+ status = ca->pub->poll_slot_status(ca->pub, slot, 0);
if (!(status & DVB_CA_EN50221_POLL_CAM_PRESENT)) {
ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_NONE;
dvb_ca_en50221_thread_update_delay(ca);
* initialization, so parg is 8 bits and does not
* include the initialization or start bit
*/
- unsigned long cmd = ((unsigned long) parg) << 1;
+ unsigned long swcmd = ((unsigned long) parg) << 1;
struct timeval nexttime;
struct timeval tv[10];
int i;
u8 last = 1;
if (dvb_frontend_debug)
- printk("%s switch command: 0x%04lx\n", __func__, cmd);
+ printk("%s switch command: 0x%04lx\n", __func__, swcmd);
do_gettimeofday(&nexttime);
if (dvb_frontend_debug)
memcpy(&tv[0], &nexttime, sizeof(struct timeval));
for (i = 0; i < 9; i++) {
if (dvb_frontend_debug)
do_gettimeofday(&tv[i + 1]);
- if ((cmd & 0x01) != last) {
+ if ((swcmd & 0x01) != last) {
/* set voltage to (last ? 13V : 18V) */
fe->ops.set_voltage(fe, (last) ? SEC_VOLTAGE_13 : SEC_VOLTAGE_18);
last = (last) ? 0 : 1;
}
- cmd = cmd >> 1;
+ swcmd = swcmd >> 1;
if (i != 8)
dvb_frontend_sleep_until(&nexttime, 8000);
}
if (d->state == DVB_USB_STATE_INIT &&
usb_set_interface(d->udev, 0, 0) < 0)
err("set interface failed");
- do; while (!(ret = cxusb_ctrl_msg(d, CMD_POWER_ON, NULL, 0, NULL, 0)) &&
+ do {} while (!(ret = cxusb_ctrl_msg(d, CMD_POWER_ON, NULL, 0, NULL, 0)) &&
!(ret = cxusb_ctrl_msg(d, 0x15, NULL, 0, NULL, 0)) &&
!(ret = cxusb_ctrl_msg(d, 0x17, NULL, 0, NULL, 0)) && 0);
if (!ret) {
{ USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_HT_EXPRESS) },
{ USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_XXS) },
{ USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_STK7700P_2) },
- { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_TD_STICK_52009) },
+/* 35 */{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_TD_STICK_52009) },
+ { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500_3) },
{ 0 } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table);
}
},
- .num_device_descs = 3,
+ .num_device_descs = 4,
.devices = {
{ "DiBcom STK7070PD reference design",
{ &dib0700_usb_id_table[17], NULL },
{ "Hauppauge Nova-TD Stick (52009)",
{ &dib0700_usb_id_table[35], NULL },
{ NULL },
+ },
+ { "Hauppauge Nova-TD-500 (84xxx)",
+ { &dib0700_usb_id_table[36], NULL },
+ { NULL },
}
}
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
#define USB_PID_WINTV_NOVA_T_USB2_WARM 0x9301
#define USB_PID_HAUPPAUGE_NOVA_T_500 0x9941
#define USB_PID_HAUPPAUGE_NOVA_T_500_2 0x9950
+#define USB_PID_HAUPPAUGE_NOVA_T_500_3 0x8400
#define USB_PID_HAUPPAUGE_NOVA_T_STICK 0x7050
#define USB_PID_HAUPPAUGE_NOVA_T_STICK_2 0x7060
#define USB_PID_HAUPPAUGE_NOVA_T_STICK_3 0x7070
/*
Auvitek AU8522 QAM/8VSB demodulator driver
- Copyright (C) 2008 Steven Toth <stoth@hauppauge.com>
+ Copyright (C) 2008 Steven Toth <stoth@linuxtv.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
return ret;
}
+static int au8522_set_if(struct dvb_frontend *fe, enum au8522_if_freq if_freq)
+{
+ struct au8522_state *state = fe->demodulator_priv;
+ u8 r0b5, r0b6, r0b7;
+ char *ifmhz;
+
+ switch (if_freq) {
+ case AU8522_IF_3_25MHZ:
+ ifmhz = "3.25";
+ r0b5 = 0x00;
+ r0b6 = 0x3d;
+ r0b7 = 0xa0;
+ break;
+ case AU8522_IF_4MHZ:
+ ifmhz = "4.00";
+ r0b5 = 0x00;
+ r0b6 = 0x4b;
+ r0b7 = 0xd9;
+ break;
+ case AU8522_IF_6MHZ:
+ ifmhz = "6.00";
+ r0b5 = 0xfb;
+ r0b6 = 0x8e;
+ r0b7 = 0x39;
+ break;
+ default:
+ dprintk("%s() IF Frequency not supported\n", __func__);
+ return -EINVAL;
+ }
+ dprintk("%s() %s MHz\n", __func__, ifmhz);
+ au8522_writereg(state, 0x80b5, r0b5);
+ au8522_writereg(state, 0x80b6, r0b6);
+ au8522_writereg(state, 0x80b7, r0b7);
+
+ return 0;
+}
+
/* VSB Modulation table */
static struct {
u16 reg;
{ 0x80af, 0x66 },
{ 0x821b, 0xcc },
{ 0x821d, 0x80 },
- { 0x80b5, 0xfb },
- { 0x80b6, 0x8e },
- { 0x80b7, 0x39 },
{ 0x80a4, 0xe8 },
{ 0x8231, 0x13 },
};
{ 0x80a4, 0x00 },
{ 0x8081, 0xc4 },
{ 0x80a5, 0x40 },
- { 0x80b5, 0xfb },
- { 0x80b6, 0x8e },
- { 0x80b7, 0x39 },
{ 0x80aa, 0x77 },
{ 0x80ad, 0x77 },
{ 0x80a6, 0x67 },
au8522_writereg(state,
VSB_mod_tab[i].reg,
VSB_mod_tab[i].data);
+ au8522_set_if(fe, state->config->vsb_if);
break;
case QAM_64:
case QAM_256:
au8522_writereg(state,
QAM_mod_tab[i].reg,
QAM_mod_tab[i].data);
+ au8522_set_if(fe, state->config->qam_if);
break;
default:
dprintk("%s() Invalid modulation\n", __func__);
/*
Auvitek AU8522 QAM/8VSB demodulator driver
- Copyright (C) 2008 Steven Toth <stoth@hauppauge.com>
+ Copyright (C) 2008 Steven Toth <stoth@linuxtv.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
#include <linux/dvb/frontend.h>
+enum au8522_if_freq {
+ AU8522_IF_6MHZ = 0,
+ AU8522_IF_4MHZ,
+ AU8522_IF_3_25MHZ,
+};
+
struct au8522_config {
/* the demodulator's i2c address */
u8 demod_address;
#define AU8522_TUNERLOCKING 0
#define AU8522_DEMODLOCKING 1
u8 status_mode;
+
+ enum au8522_if_freq vsb_if;
+ enum au8522_if_freq qam_if;
};
#if defined(CONFIG_DVB_AU8522) || \
Copyright (C) 2001-2002 Convergence Integrated Media GmbH
Holger Waechtler <holger@convergence.de>
- Copyright (C) 2004 Steven Toth <stoth@hauppauge.com>
+ Copyright (C) 2004 Steven Toth <stoth@linuxtv.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
Copyright (C) 2001-2002 Convergence Integrated Media GmbH
Holger Waechtler <holger@convergence.de>
- Copyright (C) 2004 Steven Toth <stoth@hauppauge.com>
+ Copyright (C) 2004 Steven Toth <stoth@linuxtv.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
/*
* Conexant cx24123/cx24109 - DVB QPSK Satellite demod/tuner driver
*
- * Copyright (C) 2005 Steven Toth <stoth@hauppauge.com>
+ * Copyright (C) 2005 Steven Toth <stoth@linuxtv.org>
*
* Support for KWorld DVB-S 100 by Vadim Catana <skystar@moldova.cc>
*
if (config->dont_use_pll)
cx24123_repeater_mode(state, 1, 0);
- strncpy(state->tuner_i2c_adapter.name,
- "CX24123 tuner I2C bus", I2C_NAME_SIZE);
+ strlcpy(state->tuner_i2c_adapter.name, "CX24123 tuner I2C bus",
+ sizeof(state->tuner_i2c_adapter.name));
state->tuner_i2c_adapter.class = I2C_CLASS_TV_DIGITAL,
state->tuner_i2c_adapter.algo = &cx24123_tuner_i2c_algo;
state->tuner_i2c_adapter.algo_data = NULL;
/*
Conexant cx24123/cx24109 - DVB QPSK Satellite demod/tuner driver
- Copyright (C) 2005 Steven Toth <stoth@hauppauge.com>
+ Copyright (C) 2005 Steven Toth <stoth@linuxtv.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
/*
Samsung S5H1409 VSB/QAM demodulator driver
- Copyright (C) 2006 Steven Toth <stoth@hauppauge.com>
+ Copyright (C) 2006 Steven Toth <stoth@linuxtv.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
break;
case QAM_64:
case QAM_256:
+ case QAM_AUTO:
dprintk("%s() QAM_AUTO (64/256)\n", __func__);
if (state->if_freq != S5H1409_QAM_IF_FREQ)
s5h1409_set_if_freq(fe, S5H1409_QAM_IF_FREQ);
/*
Samsung S5H1409 VSB/QAM demodulator driver
- Copyright (C) 2006 Steven Toth <stoth@hauppauge.com>
+ Copyright (C) 2006 Steven Toth <stoth@linuxtv.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
/*
Samsung S5H1411 VSB/QAM demodulator driver
- Copyright (C) 2008 Steven Toth <stoth@hauppauge.com>
+ Copyright (C) 2008 Steven Toth <stoth@linuxtv.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
break;
case QAM_64:
case QAM_256:
+ case QAM_AUTO:
dprintk("%s() QAM_AUTO (64/256)\n", __func__);
s5h1411_set_if_freq(fe, state->config->qam_if);
s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0x00, 0x0171);
/*
Samsung S5H1411 VSB/QAM demodulator driver
- Copyright (C) 2008 Steven Toth <stoth@hauppauge.com>
+ Copyright (C) 2008 Steven Toth <stoth@linuxtv.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
state->frontend.demodulator_priv = state;
/* create tuner i2c adapter */
- strncpy(state->tuner_i2c_adapter.name, "S5H1420-PN1010 tuner I2C bus", I2C_NAME_SIZE);
+ strlcpy(state->tuner_i2c_adapter.name, "S5H1420-PN1010 tuner I2C bus",
+ sizeof(state->tuner_i2c_adapter.name));
state->tuner_i2c_adapter.class = I2C_CLASS_TV_DIGITAL,
state->tuner_i2c_adapter.algo = &s5h1420_tuner_i2c_algo;
state->tuner_i2c_adapter.algo_data = NULL;
/*
NXP TDA10048HN DVB OFDM demodulator driver
- Copyright (C) 2008 Steven Toth <stoth@hauppauge.com>
+ Copyright (C) 2008 Steven Toth <stoth@linuxtv.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
if (fw->size != TDA10048_DEFAULT_FIRMWARE_SIZE) {
printk(KERN_ERR "%s: firmware incorrect size\n", __func__);
- return -EIO;
+ ret = -EIO;
} else {
printk(KERN_INFO "%s: firmware uploading\n", __func__);
/*
NXP TDA10048HN DVB OFDM demodulator driver
- Copyright (C) 2008 Steven Toth <stoth@hauppauge.com>
+ Copyright (C) 2008 Steven Toth <stoth@linuxtv.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
* Copyright (c) 2008 Michael Krufky <mkrufky@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 3 as
+ * it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation;
*
* Software distributed under the License is distributed on an "AS IS"
* Copyright (c) 2008 Michael Krufky <mkrufky@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 3 as
+ * it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation;
*
* Software distributed under the License is distributed on an "AS IS"
* Copyright (c), 2005-2008 Siano Mobile Silicon, Inc.
*
* This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 3 as
+ * it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation;
*
* Software distributed under the License is distributed on an "AS IS"
* Copyright (c), 2005-2008 Siano Mobile Silicon, Inc.
*
* This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 3 as
+ * it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation;
*
* Software distributed under the License is distributed on an "AS IS"
* Copyright (c), 2005-2008 Siano Mobile Silicon, Inc.
*
* This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 3 as
+ * it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation;
*
* Software distributed under the License is distributed on an "AS IS"
* Copyright (c), 2005-2008 Siano Mobile Silicon, Inc.
*
* This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 3 as
+ * it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation;
*
* Software distributed under the License is distributed on an "AS IS"
DiseqcSendByte(budget, 0xff);
else {
saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI);
- udelay(12500);
+ mdelay(12);
+ udelay(500);
saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
}
msleep(20);
DiseqcSendByte(budget, 0xff);
else {
saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI);
- udelay(12500);
+ mdelay(12);
+ udelay(500);
saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
}
msleep(20);
# Makefile for the kernel character device drivers.
#
-miropcm20-objs := miropcm20-rds-core.o miropcm20-radio.o
-
obj-$(CONFIG_RADIO_AZTECH) += radio-aztech.o
obj-$(CONFIG_RADIO_RTRACK2) += radio-rtrack2.o
obj-$(CONFIG_RADIO_SF16FMI) += radio-sf16fmi.o
obj-$(CONFIG_RADIO_MAXIRADIO) += radio-maxiradio.o
obj-$(CONFIG_RADIO_RTRACK) += radio-aimslab.o
obj-$(CONFIG_RADIO_ZOLTRIX) += radio-zoltrix.o
-obj-$(CONFIG_RADIO_MIROPCM20) += miropcm20.o
-obj-$(CONFIG_RADIO_MIROPCM20_RDS) += miropcm20-rds.o
obj-$(CONFIG_RADIO_GEMTEK) += radio-gemtek.o
obj-$(CONFIG_RADIO_GEMTEK_PCI) += radio-gemtek-pci.o
obj-$(CONFIG_RADIO_TRUST) += radio-trust.o
radio->usbdev = interface_to_usbdev(intf);
radio->curfreq = FREQ_MIN*FREQ_MUL;
video_set_drvdata(radio->videodev, radio);
- if (video_register_device(radio->videodev, VFL_TYPE_RADIO,radio_nr)) {
+ if (video_register_device(radio->videodev, VFL_TYPE_RADIO, radio_nr) < 0) {
warn("Could not register video device");
video_device_release(radio->videodev);
kfree(radio->transfer_buffer);
+++ /dev/null
-/* Miro PCM20 radio driver for Linux radio support
- * (c) 1998 Ruurd Reitsma <R.A.Reitsma@wbmt.tudelft.nl>
- * Thanks to Norberto Pellici for the ACI device interface specification
- * The API part is based on the radiotrack driver by M. Kirkwood
- * This driver relies on the aci mixer (drivers/sound/aci.c)
- * Look there for further info...
- */
-
-/* Revision history:
- *
- * 1998 Ruurd Reitsma <R.A.Reitsma@wbmt.tudelft.nl>
- * 2000-09-05 Robert Siemer <Robert.Siemer@gmx.de>
- * removed unfinished volume control (maybe adding it later again)
- * use OSS-mixer; added stereo control
- */
-
-/* What ever you think about the ACI, version 0x07 is not very well!
- * I can't get frequency, 'tuner status', 'tuner flags' or mute/mono
- * conditions... Robert
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/videodev.h>
-#include <media/v4l2-common.h>
-#include <media/v4l2-ioctl.h>
-#include "oss/aci.h"
-#include "miropcm20-rds-core.h"
-
-static int radio_nr = -1;
-module_param(radio_nr, int, 0);
-
-struct pcm20_device {
- unsigned long freq;
- int muted;
- int stereo;
-};
-
-
-static int pcm20_mute(struct pcm20_device *dev, unsigned char mute)
-{
- dev->muted = mute;
- return aci_write_cmd(ACI_SET_TUNERMUTE, mute);
-}
-
-static int pcm20_stereo(struct pcm20_device *dev, unsigned char stereo)
-{
- dev->stereo = stereo;
- return aci_write_cmd(ACI_SET_TUNERMONO, !stereo);
-}
-
-static int pcm20_setfreq(struct pcm20_device *dev, unsigned long freq)
-{
- unsigned char freql;
- unsigned char freqh;
-
- dev->freq=freq;
-
- freq /= 160;
- if (!(aci_version==0x07 || aci_version>=0xb0))
- freq /= 10; /* I don't know exactly which version
- * needs this hack */
- freql = freq & 0xff;
- freqh = freq >> 8;
-
- aci_rds_cmd(RDS_RESET, NULL, 0);
- pcm20_stereo(dev, 1);
-
- return aci_rw_cmd(ACI_WRITE_TUNE, freql, freqh);
-}
-
-static int pcm20_getflags(struct pcm20_device *dev, __u32 *flags, __u16 *signal)
-{
- /* okay, check for signal, stereo and rds here... */
- int i;
- unsigned char buf;
-
- if ((i=aci_rw_cmd(ACI_READ_TUNERSTATION, -1, -1))<0)
- return i;
- pr_debug("check_sig: 0x%x\n", i);
- if (i & 0x80) {
- /* no signal from tuner */
- *flags=0;
- *signal=0;
- return 0;
- } else
- *signal=0xffff;
-
- if ((i=aci_rw_cmd(ACI_READ_TUNERSTEREO, -1, -1))<0)
- return i;
- if (i & 0x40) {
- *flags=0;
- } else {
- /* stereo */
- *flags=VIDEO_TUNER_STEREO_ON;
- /* I can't see stereo, when forced to mono */
- dev->stereo=1;
- }
-
- if ((i=aci_rds_cmd(RDS_STATUS, &buf, 1))<0)
- return i;
- if (buf & 1)
- /* RDS available */
- *flags|=VIDEO_TUNER_RDS_ON;
- else
- return 0;
-
- if ((i=aci_rds_cmd(RDS_RXVALUE, &buf, 1))<0)
- return i;
- pr_debug("rds-signal: %d\n", buf);
- if (buf > 15) {
- printk("miropcm20-radio: RX strengths unexpected high...\n");
- buf=15;
- }
- /* refine signal */
- if ((*signal=SCALE(15, 0xffff, buf))==0)
- *signal = 1;
-
- return 0;
-}
-
-static int pcm20_do_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, void *arg)
-{
- struct video_device *dev = video_devdata(file);
- struct pcm20_device *pcm20 = dev->priv;
- int i;
-
- switch(cmd)
- {
- case VIDIOCGCAP:
- {
- struct video_capability *v = arg;
- memset(v,0,sizeof(*v));
- v->type=VID_TYPE_TUNER;
- strcpy(v->name, "Miro PCM20");
- v->channels=1;
- v->audios=1;
- return 0;
- }
- case VIDIOCGTUNER:
- {
- struct video_tuner *v = arg;
- if(v->tuner) /* Only 1 tuner */
- return -EINVAL;
- v->rangelow=87*16000;
- v->rangehigh=108*16000;
- pcm20_getflags(pcm20, &v->flags, &v->signal);
- v->flags|=VIDEO_TUNER_LOW;
- v->mode=VIDEO_MODE_AUTO;
- strcpy(v->name, "FM");
- return 0;
- }
- case VIDIOCSTUNER:
- {
- struct video_tuner *v = arg;
- if(v->tuner!=0)
- return -EINVAL;
- /* Only 1 tuner so no setting needed ! */
- return 0;
- }
- case VIDIOCGFREQ:
- {
- unsigned long *freq = arg;
- *freq = pcm20->freq;
- return 0;
- }
- case VIDIOCSFREQ:
- {
- unsigned long *freq = arg;
- pcm20->freq = *freq;
- i=pcm20_setfreq(pcm20, pcm20->freq);
- pr_debug("First view (setfreq): 0x%x\n", i);
- return i;
- }
- case VIDIOCGAUDIO:
- {
- struct video_audio *v = arg;
- memset(v,0, sizeof(*v));
- v->flags=VIDEO_AUDIO_MUTABLE;
- if (pcm20->muted)
- v->flags|=VIDEO_AUDIO_MUTE;
- v->mode=VIDEO_SOUND_STEREO;
- if (pcm20->stereo)
- v->mode|=VIDEO_SOUND_MONO;
- /* v->step=2048; */
- strcpy(v->name, "Radio");
- return 0;
- }
- case VIDIOCSAUDIO:
- {
- struct video_audio *v = arg;
- if(v->audio)
- return -EINVAL;
-
- pcm20_mute(pcm20, !!(v->flags&VIDEO_AUDIO_MUTE));
- if(v->flags&VIDEO_SOUND_MONO)
- pcm20_stereo(pcm20, 0);
- if(v->flags&VIDEO_SOUND_STEREO)
- pcm20_stereo(pcm20, 1);
-
- return 0;
- }
- default:
- return -ENOIOCTLCMD;
- }
-}
-
-static int pcm20_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
-{
- return video_usercopy(inode, file, cmd, arg, pcm20_do_ioctl);
-}
-
-static struct pcm20_device pcm20_unit = {
- .freq = 87*16000,
- .muted = 1,
-};
-
-static const struct file_operations pcm20_fops = {
- .owner = THIS_MODULE,
- .open = video_exclusive_open,
- .release = video_exclusive_release,
- .ioctl = pcm20_ioctl,
-#ifdef CONFIG_COMPAT
- .compat_ioctl = v4l_compat_ioctl32,
-#endif
- .llseek = no_llseek,
-};
-
-static struct video_device pcm20_radio = {
- .name = "Miro PCM 20 radio",
- .fops = &pcm20_fops,
- .priv = &pcm20_unit
-};
-
-static int __init pcm20_init(void)
-{
- if(video_register_device(&pcm20_radio, VFL_TYPE_RADIO, radio_nr)==-1)
- goto video_register_device;
-
- if(attach_aci_rds()<0)
- goto attach_aci_rds;
-
- printk(KERN_INFO "Miro PCM20 radio card driver.\n");
-
- return 0;
-
- attach_aci_rds:
- video_unregister_device(&pcm20_radio);
- video_register_device:
- return -EINVAL;
-}
-
-MODULE_AUTHOR("Ruurd Reitsma");
-MODULE_DESCRIPTION("A driver for the Miro PCM20 radio card.");
-MODULE_LICENSE("GPL");
-
-static void __exit pcm20_cleanup(void)
-{
- unload_aci_rds();
- video_unregister_device(&pcm20_radio);
-}
-
-module_init(pcm20_init);
-module_exit(pcm20_cleanup);
+++ /dev/null
-/*
- * Many thanks to Fred Seidel <seidel@metabox.de>, the
- * designer of the RDS decoder hardware. With his help
- * I was able to code this driver.
- * Thanks also to Norberto Pellicci, Dominic Mounteney
- * <DMounteney@pinnaclesys.com> and www.teleauskunft.de
- * for good hints on finding Fred. It was somewhat hard
- * to locate him here in Germany... [:
- *
- * Revision history:
- *
- * 2000-08-09 Robert Siemer <Robert.Siemer@gmx.de>
- * RDS support for MiroSound PCM20 radio
- */
-
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/mutex.h>
-
-#include <asm/io.h>
-#include "oss/aci.h"
-#include "miropcm20-rds-core.h"
-
-#define DEBUG 0
-
-static struct mutex aci_rds_mutex;
-
-#define RDS_DATASHIFT 2 /* Bit 2 */
-#define RDS_DATAMASK (1 << RDS_DATASHIFT)
-#define RDS_BUSYMASK 0x10 /* Bit 4 */
-#define RDS_CLOCKMASK 0x08 /* Bit 3 */
-
-#define RDS_DATA(x) (((x) >> RDS_DATASHIFT) & 1)
-
-
-#if DEBUG
-static void print_matrix(char array[], unsigned int length)
-{
- int i, j;
-
- for (i=0; i<length; i++) {
- printk(KERN_DEBUG "aci-rds: ");
- for (j=7; j>=0; j--) {
- printk("%d", (array[i] >> j) & 0x1);
- }
- if (i%8 == 0)
- printk(" byte-border\n");
- else
- printk("\n");
- }
-}
-#endif /* DEBUG */
-
-static int byte2trans(unsigned char byte, unsigned char sendbuffer[], int size)
-{
- int i;
-
- if (size != 8)
- return -1;
- for (i = 7; i >= 0; i--)
- sendbuffer[7-i] = (byte & (1 << i)) ? RDS_DATAMASK : 0;
- sendbuffer[0] |= RDS_CLOCKMASK;
-
- return 0;
-}
-
-static int rds_waitread(void)
-{
- unsigned char byte;
- int i=2000;
-
- do {
- byte=inb(RDS_REGISTER);
- i--;
- }
- while ((byte & RDS_BUSYMASK) && i);
-
- if (i) {
- #if DEBUG
- printk(KERN_DEBUG "rds_waitread()");
- print_matrix(&byte, 1);
- #endif
- return (byte);
- } else {
- printk(KERN_WARNING "aci-rds: rds_waitread() timeout...\n");
- return -1;
- }
-}
-
-/* don't use any ..._nowait() function if you are not sure what you do... */
-
-static inline void rds_rawwrite_nowait(unsigned char byte)
-{
- #if DEBUG
- printk(KERN_DEBUG "rds_rawwrite()");
- print_matrix(&byte, 1);
- #endif
- outb(byte, RDS_REGISTER);
-}
-
-static int rds_rawwrite(unsigned char byte)
-{
- if (rds_waitread() >= 0) {
- rds_rawwrite_nowait(byte);
- return 0;
- } else
- return -1;
-}
-
-static int rds_write(unsigned char cmd)
-{
- unsigned char sendbuffer[8];
- int i;
-
- if (byte2trans(cmd, sendbuffer, 8) != 0){
- return -1;
- } else {
- for (i=0; i<8; i++) {
- rds_rawwrite(sendbuffer[i]);
- }
- }
- return 0;
-}
-
-static int rds_readcycle_nowait(void)
-{
- rds_rawwrite_nowait(0);
- return rds_waitread();
-}
-
-static int rds_readcycle(void)
-{
- if (rds_rawwrite(0) < 0)
- return -1;
- return rds_waitread();
-}
-
-static int rds_read(unsigned char databuffer[], int datasize)
-{
- #define READSIZE (8*datasize)
-
- int i,j;
-
- if (datasize < 1) /* nothing to read */
- return 0;
-
- /* to be able to use rds_readcycle_nowait()
- I have to waitread() here */
- if (rds_waitread() < 0)
- return -1;
-
- memset(databuffer, 0, datasize);
-
- for (i=0; i< READSIZE; i++)
- if((j=rds_readcycle_nowait()) < 0) {
- return -1;
- } else {
- databuffer[i/8]|=(RDS_DATA(j) << (7-(i%8)));
- }
-
- return 0;
-}
-
-static int rds_ack(void)
-{
- int i=rds_readcycle();
-
- if (i < 0)
- return -1;
- if (i & RDS_DATAMASK) {
- return 0; /* ACK */
- } else {
- printk(KERN_DEBUG "aci-rds: NACK\n");
- return 1; /* NACK */
- }
-}
-
-int aci_rds_cmd(unsigned char cmd, unsigned char databuffer[], int datasize)
-{
- int ret;
-
- if (mutex_lock_interruptible(&aci_rds_mutex))
- return -EINTR;
-
- rds_write(cmd);
-
- /* RDS_RESET doesn't need further processing */
- if (cmd!=RDS_RESET && (rds_ack() || rds_read(databuffer, datasize)))
- ret = -1;
- else
- ret = 0;
-
- mutex_unlock(&aci_rds_mutex);
-
- return ret;
-}
-EXPORT_SYMBOL(aci_rds_cmd);
-
-int __init attach_aci_rds(void)
-{
- mutex_init(&aci_rds_mutex);
- return 0;
-}
-
-void __exit unload_aci_rds(void)
-{
-}
-MODULE_LICENSE("GPL");
+++ /dev/null
-#ifndef _MIROPCM20_RDS_CORE_H_
-#define _MIROPCM20_RDS_CORE_H_
-
-extern int aci_rds_cmd(unsigned char cmd, unsigned char databuffer[], int datasize);
-
-#define RDS_STATUS 0x01
-#define RDS_STATIONNAME 0x02
-#define RDS_TEXT 0x03
-#define RDS_ALTFREQ 0x04
-#define RDS_TIMEDATE 0x05
-#define RDS_PI_CODE 0x06
-#define RDS_PTYTATP 0x07
-#define RDS_RESET 0x08
-#define RDS_RXVALUE 0x09
-
-extern void __exit unload_aci_rds(void);
-extern int __init attach_aci_rds(void);
-
-#endif /* _MIROPCM20_RDS_CORE_H_ */
+++ /dev/null
-/* MiroSOUND PCM20 radio rds interface driver
- * (c) 2001 Robert Siemer <Robert.Siemer@gmx.de>
- * Thanks to Fred Seidel. See miropcm20-rds-core.c for further information.
- */
-
-/* Revision history:
- *
- * 2001-04-18 Robert Siemer <Robert.Siemer@gmx.de>
- * separate file for user interface driver
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/smp_lock.h>
-#include <linux/fs.h>
-#include <linux/miscdevice.h>
-#include <linux/delay.h>
-#include <asm/uaccess.h>
-#include "miropcm20-rds-core.h"
-
-static char * text_buffer;
-static int rds_users;
-
-
-static int rds_f_open(struct inode *in, struct file *fi)
-{
- if (rds_users)
- return -EBUSY;
-
- lock_kernel();
- rds_users++;
- if ((text_buffer=kmalloc(66, GFP_KERNEL)) == 0) {
- rds_users--;
- printk(KERN_NOTICE "aci-rds: Out of memory by open()...\n");
- unlock_kernel();
- return -ENOMEM;
- }
-
- unlock_kernel();
- return 0;
-}
-
-static int rds_f_release(struct inode *in, struct file *fi)
-{
- kfree(text_buffer);
-
- rds_users--;
- return 0;
-}
-
-static void print_matrix(char *ch, char out[])
-{
- int j;
-
- for (j=7; j>=0; j--) {
- out[7-j] = ((*ch >> j) & 0x1) + '0';
- }
-}
-
-static ssize_t rds_f_read(struct file *file, char __user *buffer, size_t length, loff_t *offset)
-{
-// i = sprintf(text_buffer, "length: %d, offset: %d\n", length, *offset);
-
- char c;
- char bits[8];
-
- msleep(2000);
- aci_rds_cmd(RDS_STATUS, &c, 1);
- print_matrix(&c, bits);
- if (copy_to_user(buffer, bits, 8))
- return -EFAULT;
-
-/* if ((c >> 3) & 1) {
- aci_rds_cmd(RDS_STATIONNAME, text_buffer+1, 8);
- text_buffer[0] = ' ' ;
- text_buffer[9] = '\n';
- return copy_to_user(buffer+8, text_buffer, 10) ? -EFAULT: 18;
- }
-*/
-/* if ((c >> 6) & 1) {
- aci_rds_cmd(RDS_PTYTATP, &c, 1);
- if ( c & 1)
- sprintf(text_buffer, " M");
- else
- sprintf(text_buffer, " S");
- if ((c >> 1) & 1)
- sprintf(text_buffer+2, " TA");
- else
- sprintf(text_buffer+2, " --");
- if ((c >> 7) & 1)
- sprintf(text_buffer+5, " TP");
- else
- sprintf(text_buffer+5, " --");
- sprintf(text_buffer+8, " %2d\n", (c >> 2) & 0x1f);
- return copy_to_user(buffer+8, text_buffer, 12) ? -EFAULT: 20;
- }
-*/
-
- if ((c >> 4) & 1) {
- aci_rds_cmd(RDS_TEXT, text_buffer, 65);
- text_buffer[0] = ' ' ;
- text_buffer[65] = '\n';
- return copy_to_user(buffer+8, text_buffer,66) ? -EFAULT : 66+8;
- } else {
- put_user('\n', buffer+8);
- return 9;
- }
-}
-
-static const struct file_operations rds_fops = {
- .owner = THIS_MODULE,
- .read = rds_f_read,
- .open = rds_f_open,
- .release = rds_f_release
-};
-
-static struct miscdevice rds_miscdev = {
- .minor = MISC_DYNAMIC_MINOR,
- .name = "radiotext",
- .fops = &rds_fops,
-};
-
-static int __init miropcm20_rds_init(void)
-{
- return misc_register(&rds_miscdev);
-}
-
-static void __exit miropcm20_rds_cleanup(void)
-{
- misc_deregister(&rds_miscdev);
-}
-
-module_init(miropcm20_rds_init);
-module_exit(miropcm20_rds_cleanup);
-MODULE_LICENSE("GPL");
rtrack_radio.priv=&rtrack_unit;
- if(video_register_device(&rtrack_radio, VFL_TYPE_RADIO, radio_nr)==-1)
- {
+ if (video_register_device(&rtrack_radio, VFL_TYPE_RADIO, radio_nr) < 0) {
release_region(io, 2);
return -EINVAL;
}
mutex_init(&lock);
aztech_radio.priv=&aztech_unit;
- if(video_register_device(&aztech_radio, VFL_TYPE_RADIO, radio_nr)==-1)
- {
+ if (video_register_device(&aztech_radio, VFL_TYPE_RADIO, radio_nr) < 0) {
release_region(io,2);
return -EINVAL;
}
}
if (!request_region(io,2,"cadet"))
goto fail;
- if(video_register_device(&cadet_radio,VFL_TYPE_RADIO,radio_nr)==-1) {
+ if (video_register_device(&cadet_radio, VFL_TYPE_RADIO, radio_nr) < 0) {
release_region(io,2);
goto fail;
}
}
*devradio = vdev_template;
- if ( video_register_device( devradio, VFL_TYPE_RADIO , nr_radio) == -1 ) {
+ if (video_register_device(devradio, VFL_TYPE_RADIO, nr_radio) < 0) {
kfree( devradio );
goto err_video;
}
gemtek_radio.priv = &gemtek_unit;
- if (video_register_device(&gemtek_radio, VFL_TYPE_RADIO,
- radio_nr) == -1) {
+ if (video_register_device(&gemtek_radio, VFL_TYPE_RADIO, radio_nr) < 0) {
release_region(io, 1);
return -EBUSY;
}
video_set_drvdata(maestro_radio_inst, radio_unit);
pci_set_drvdata(pdev, maestro_radio_inst);
- retval = video_register_device(maestro_radio_inst, VFL_TYPE_RADIO,
- radio_nr);
+ retval = video_register_device(maestro_radio_inst, VFL_TYPE_RADIO, radio_nr);
if (retval) {
printk(KERN_ERR "can't register video device!\n");
goto errfr1;
{
unsigned long int si;
int bl;
- int data = FREQ2BITS(freq);
+ int val = FREQ2BITS(freq);
/* TEA5757 shift register bits (see pdf) */
- outbit(0,io); // 24 search
- outbit(1,io); // 23 search up/down
+ outbit(0, io); /* 24 search */
+ outbit(1, io); /* 23 search up/down */
- outbit(0,io); // 22 stereo/mono
+ outbit(0, io); /* 22 stereo/mono */
- outbit(0,io); // 21 band
- outbit(0,io); // 20 band (only 00=FM works I think)
+ outbit(0, io); /* 21 band */
+ outbit(0, io); /* 20 band (only 00=FM works I think) */
- outbit(0,io); // 19 port ?
- outbit(0,io); // 18 port ?
+ outbit(0, io); /* 19 port ? */
+ outbit(0, io); /* 18 port ? */
- outbit(0,io); // 17 search level
- outbit(0,io); // 16 search level
+ outbit(0, io); /* 17 search level */
+ outbit(0, io); /* 16 search level */
si = 0x8000;
- for (bl = 1; bl <= 16 ; bl++) {
- outbit(data & si,io);
- si >>=1;
+ for (bl = 1; bl <= 16; bl++) {
+ outbit(val & si, io);
+ si >>= 1;
}
dprintk(1, "Radio freq set to %d.%02d MHz\n",
mutex_init(&radio_unit.lock);
maxiradio_radio.priv = &radio_unit;
- if (video_register_device(&maxiradio_radio, VFL_TYPE_RADIO, radio_nr)==-1) {
+ if (video_register_device(&maxiradio_radio, VFL_TYPE_RADIO, radio_nr) < 0) {
printk("radio-maxiradio: can't register device!");
goto err_out_free_region;
}
rtrack2_radio.priv=&rtrack2_unit;
spin_lock_init(&lock);
- if(video_register_device(&rtrack2_radio, VFL_TYPE_RADIO, radio_nr)==-1)
- {
+ if (video_register_device(&rtrack2_radio, VFL_TYPE_RADIO, radio_nr) < 0) {
release_region(io, 4);
return -EINVAL;
}
mutex_init(&lock);
- if (video_register_device(&fmi_radio, VFL_TYPE_RADIO, radio_nr) == -1) {
+ if (video_register_device(&fmi_radio, VFL_TYPE_RADIO, radio_nr) < 0) {
release_region(io, 2);
return -EINVAL;
}
INIT_DELAYED_WORK(&radio->work, si470x_work);
/* register video device */
- if (video_register_device(radio->videodev, VFL_TYPE_RADIO, radio_nr)) {
- retval = -EIO;
+ retval = video_register_device(radio->videodev, VFL_TYPE_RADIO, radio_nr);
+ if (retval) {
printk(KERN_WARNING DRIVER_NAME
": Could not register video device\n");
goto err_all;
spin_lock_init(&lock);
- if(video_register_device(&terratec_radio, VFL_TYPE_RADIO, radio_nr)==-1)
- {
+ if (video_register_device(&terratec_radio, VFL_TYPE_RADIO, radio_nr) < 0) {
release_region(io,2);
return -EINVAL;
}
printk(KERN_ERR "trust: port 0x%x already in use\n", io);
return -EBUSY;
}
- if(video_register_device(&trust_radio, VFL_TYPE_RADIO, radio_nr)==-1)
- {
+ if (video_register_device(&trust_radio, VFL_TYPE_RADIO, radio_nr) < 0) {
release_region(io, 2);
return -EINVAL;
}
return -EBUSY;
}
- if (video_register_device(&zoltrix_radio, VFL_TYPE_RADIO, radio_nr) == -1)
- {
+ if (video_register_device(&zoltrix_radio, VFL_TYPE_RADIO, radio_nr) < 0) {
release_region(io, 2);
return -EINVAL;
}
config VIDEO_SH_MOBILE_CEU
tristate "SuperH Mobile CEU Interface driver"
- depends on VIDEO_DEV
+ depends on VIDEO_DEV && HAS_DMA
select SOC_CAMERA
select VIDEOBUF_DMA_CONTIG
---help---
obj-$(CONFIG_VIDEO_DEV) += v4l1-compat.o
endif
+obj-$(CONFIG_VIDEO_TUNER) += tuner.o
+
obj-$(CONFIG_VIDEO_BT848) += bt8xx/
obj-$(CONFIG_VIDEO_IR_I2C) += ir-kbd-i2c.o
obj-$(CONFIG_VIDEO_TVAUDIO) += tvaudio.o
obj-$(CONFIG_VIDEO_DPC) += dpc7146.o
obj-$(CONFIG_TUNER_3036) += tuner-3036.o
-obj-$(CONFIG_VIDEO_TUNER) += tuner.o
-
obj-$(CONFIG_VIDEOBUF_GEN) += videobuf-core.o
obj-$(CONFIG_VIDEOBUF_DMA_SG) += videobuf-dma-sg.o
obj-$(CONFIG_VIDEOBUF_DMA_CONTIG) += videobuf-dma-contig.o
select DVB_AU8522 if !DVB_FE_CUSTOMIZE
select MEDIA_TUNER_XC5000 if !DVB_FE_CUSTOMIZE
select MEDIA_TUNER_MXL5007T if !DVB_FE_CUSTOMIZE
+ select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMIZE
---help---
This is a video4linux driver for Auvitek's USB device.
/*
* Driver for the Auvitek USB bridge
*
- * Copyright (c) 2008 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2008 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
[AU0828_BOARD_DVICO_FUSIONHDTV7] = {
.name = "DViCO FusionHDTV USB",
},
+ [AU0828_BOARD_HAUPPAUGE_WOODBURY] = {
+ .name = "Hauppauge Woodbury",
+ },
};
/* Tuner callback function for au0828 boards. Currently only needed
case AU0828_BOARD_HAUPPAUGE_HVR850:
case AU0828_BOARD_HAUPPAUGE_HVR950Q:
case AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL:
+ case AU0828_BOARD_HAUPPAUGE_WOODBURY:
if (dev->i2c_rc == 0)
hauppauge_eeprom(dev, eeprom+0xa0);
break;
case AU0828_BOARD_HAUPPAUGE_HVR850:
case AU0828_BOARD_HAUPPAUGE_HVR950Q:
case AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL:
+ case AU0828_BOARD_HAUPPAUGE_WOODBURY:
/* GPIO's
* 4 - CS5340
* 5 - AU8522 Demodulator
.driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL },
{ USB_DEVICE(0x2040, 0x7281),
.driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL },
+ { USB_DEVICE(0x2040, 0x8200),
+ .driver_info = AU0828_BOARD_HAUPPAUGE_WOODBURY },
{ },
};
/*
* Driver for the Auvitek USB bridge
*
- * Copyright (c) 2008 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2008 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#define AU0828_BOARD_HAUPPAUGE_HVR850 2
#define AU0828_BOARD_DVICO_FUSIONHDTV7 3
#define AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL 4
+#define AU0828_BOARD_HAUPPAUGE_WOODBURY 5
/*
* Driver for the Auvitek USB bridge
*
- * Copyright (c) 2008 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2008 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
module_exit(au0828_exit);
MODULE_DESCRIPTION("Driver for Auvitek AU0828 based products");
-MODULE_AUTHOR("Steven Toth <stoth@hauppauge.com>");
+MODULE_AUTHOR("Steven Toth <stoth@linuxtv.org>");
MODULE_LICENSE("GPL");
/*
* Driver for the Auvitek USB bridge
*
- * Copyright (c) 2008 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2008 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#include "au8522.h"
#include "xc5000.h"
#include "mxl5007t.h"
+#include "tda18271.h"
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
static struct au8522_config hauppauge_hvr950q_config = {
.demod_address = 0x8e >> 1,
.status_mode = AU8522_DEMODLOCKING,
+ .qam_if = AU8522_IF_6MHZ,
+ .vsb_if = AU8522_IF_6MHZ,
+};
+
+static struct au8522_config hauppauge_woodbury_config = {
+ .demod_address = 0x8e >> 1,
+ .status_mode = AU8522_DEMODLOCKING,
+ .qam_if = AU8522_IF_4MHZ,
+ .vsb_if = AU8522_IF_3_25MHZ,
};
static struct xc5000_config hauppauge_hvr950q_tunerconfig = {
.if_freq_hz = MxL_IF_6_MHZ,
};
+static struct tda18271_config hauppauge_woodbury_tunerconfig = {
+ .gate = TDA18271_GATE_DIGITAL,
+};
+
/*-------------------------------------------------------------------*/
static void urb_completion(struct urb *purb)
{
&dev->i2c_adap, 0x60,
&mxl5007t_hvr950q_config);
break;
+ case AU0828_BOARD_HAUPPAUGE_WOODBURY:
+ dvb->frontend = dvb_attach(au8522_attach,
+ &hauppauge_woodbury_config,
+ &dev->i2c_adap);
+ if (dvb->frontend != NULL)
+ dvb_attach(tda18271_attach, dvb->frontend,
+ 0x60, &dev->i2c_adap,
+ &hauppauge_woodbury_tunerconfig);
+ break;
default:
printk(KERN_WARNING "The frontend of your DVB/ATSC card "
"isn't supported yet\n");
/*
* Driver for the Auvitek AU0828 USB bridge
*
- * Copyright (c) 2008 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2008 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
/*
* Driver for the Auvitek USB bridge
*
- * Copyright (c) 2008 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2008 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
/*
* Driver for the Auvitek AU0828 USB bridge
*
- * Copyright (c) 2008 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2008 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
static void flyvideo_gpio(struct bttv *btv)
{
- int gpio,has_remote,has_radio,is_capture_only,is_lr90,has_tda9820_tda9821;
- int tuner=UNSET,ttype;
+ int gpio, has_remote, has_radio, is_capture_only;
+ int is_lr90, has_tda9820_tda9821;
+ int tuner_type = UNSET, ttype;
gpio_inout(0xffffff, 0);
udelay(8); /* without this we would see the 0x1800 mask */
* xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered
* Note: Some bits are Audio_Mask !
*/
- ttype=(gpio&0x0f0000)>>16;
- switch(ttype) {
- case 0x0: tuner=2; /* NTSC, e.g. TPI8NSR11P */
+ ttype = (gpio & 0x0f0000) >> 16;
+ switch (ttype) {
+ case 0x0:
+ tuner_type = 2; /* NTSC, e.g. TPI8NSR11P */
break;
- case 0x2: tuner=39;/* LG NTSC (newer TAPC series) TAPC-H701P */
+ case 0x2:
+ tuner_type = 39; /* LG NTSC (newer TAPC series) TAPC-H701P */
break;
- case 0x4: tuner=5; /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */
+ case 0x4:
+ tuner_type = 5; /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */
break;
- case 0x6: tuner=37;/* LG PAL (newer TAPC series) TAPC-G702P */
+ case 0x6:
+ tuner_type = 37; /* LG PAL (newer TAPC series) TAPC-G702P */
break;
- case 0xC: tuner=3; /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */
+ case 0xC:
+ tuner_type = 3; /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */
break;
default:
printk(KERN_INFO "bttv%d: FlyVideo_gpio: unknown tuner type.\n", btv->c.nr);
+ break;
}
has_remote = gpio & 0x800000;
/*
* gpio & 0x001000 output bit for audio routing */
- if(is_capture_only)
- tuner = TUNER_ABSENT; /* No tuner present */
+ if (is_capture_only)
+ tuner_type = TUNER_ABSENT; /* No tuner present */
printk(KERN_INFO "bttv%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
- btv->c.nr, has_radio? "yes":"no ", has_remote? "yes":"no ", tuner, gpio);
+ btv->c.nr, has_radio ? "yes" : "no ",
+ has_remote ? "yes" : "no ", tuner_type, gpio);
printk(KERN_INFO "bttv%d: FlyVideo LR90=%s tda9821/tda9820=%s capture_only=%s\n",
- btv->c.nr, is_lr90?"yes":"no ", has_tda9820_tda9821?"yes":"no ",
- is_capture_only?"yes":"no ");
+ btv->c.nr, is_lr90 ? "yes" : "no ",
+ has_tda9820_tda9821 ? "yes" : "no ",
+ is_capture_only ? "yes" : "no ");
- if (tuner != UNSET) /* only set if known tuner autodetected, else let insmod option through */
- btv->tuner_type = tuner;
+ if (tuner_type != UNSET) /* only set if known tuner autodetected, else let insmod option through */
+ btv->tuner_type = tuner_type;
btv->has_radio = has_radio;
/* LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80
* LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00
* Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute */
- if(has_tda9820_tda9821) btv->audio_mode_gpio = lt9415_audio;
+ if (has_tda9820_tda9821)
+ btv->audio_mode_gpio = lt9415_audio;
/* todo: if(has_tda9874) btv->audio_mode_gpio = fv2000s_audio; */
}
static void __devinit avermedia_eeprom(struct bttv *btv)
{
- int tuner_make,tuner_tv_fm,tuner_format,tuner=0;
+ int tuner_make, tuner_tv_fm, tuner_format, tuner_type = 0;
tuner_make = (eeprom_data[0x41] & 0x7);
tuner_tv_fm = (eeprom_data[0x41] & 0x18) >> 3;
btv->has_remote = (eeprom_data[0x42] & 0x01);
if (tuner_make == 0 || tuner_make == 2)
- if(tuner_format <=0x0a)
- tuner = tuner_0_table[tuner_format];
+ if (tuner_format <= 0x0a)
+ tuner_type = tuner_0_table[tuner_format];
if (tuner_make == 1)
- if(tuner_format <=9)
- tuner = tuner_1_table[tuner_format];
+ if (tuner_format <= 9)
+ tuner_type = tuner_1_table[tuner_format];
if (tuner_make == 4)
- if(tuner_format == 0x09)
- tuner = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */
+ if (tuner_format == 0x09)
+ tuner_type = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */
printk(KERN_INFO "bttv%d: Avermedia eeprom[0x%02x%02x]: tuner=",
- btv->c.nr,eeprom_data[0x41],eeprom_data[0x42]);
- if(tuner) {
- btv->tuner_type=tuner;
- printk("%d",tuner);
+ btv->c.nr, eeprom_data[0x41], eeprom_data[0x42]);
+ if (tuner_type) {
+ btv->tuner_type = tuner_type;
+ printk(KERN_CONT "%d", tuner_type);
} else
- printk("Unknown type");
- printk(" radio:%s remote control:%s\n",
+ printk(KERN_CONT "Unknown type");
+ printk(KERN_CONT " radio:%s remote control:%s\n",
tuner_tv_fm ? "yes" : "no",
btv->has_remote ? "yes" : "no");
}
gpio_inout(mask,mask);
gpio_bits(mask,0);
- udelay(2500);
+ mdelay(2);
+ udelay(500);
gpio_bits(mask,mask);
if (bttv_gpio)
static unsigned int uv_ratio = 50;
static unsigned int full_luma_range;
static unsigned int coring;
-extern int no_overlay;
/* API features (turn on/off stuff for testing) */
static unsigned int v4l2 = 1;
const struct bttv_format *fmt, struct bttv_overlay *ov,
int skip_even, int skip_odd)
{
- int dwords,rc,line,maxy,start,end,skip,nskips;
+ int dwords, rc, line, maxy, start, end;
+ unsigned skip, nskips;
struct btcx_skiplist *skips;
__le32 *rp;
u32 ri,ra;
int bttv_sub_add_device(struct bttv_core *core, char *name);
int bttv_sub_del_devices(struct bttv_core *core);
+/* ---------------------------------------------------------- */
+/* bttv-cards.c */
+
+extern int no_overlay;
+
/* ---------------------------------------------------------- */
/* bttv-driver.c */
}
void
-btcx_calc_skips(int line, int width, unsigned int *maxy,
+btcx_calc_skips(int line, int width, int *maxy,
struct btcx_skiplist *skips, unsigned int *nskips,
const struct v4l2_clip *clips, unsigned int nclips)
{
unsigned int clip,skip;
- int end,maxline;
+ int end, maxline;
skip=0;
maxline = 9999;
int btcx_align(struct v4l2_rect *win, struct v4l2_clip *clips,
unsigned int n, int mask);
void btcx_sort_clips(struct v4l2_clip *clips, unsigned int nclips);
-void btcx_calc_skips(int line, int width, unsigned int *maxy,
+void btcx_calc_skips(int line, int width, int *maxy,
struct btcx_skiplist *skips, unsigned int *nskips,
const struct v4l2_clip *clips, unsigned int nclips);
printk(KERN_INFO "Connectix Quickcam on %s\n", qcam->pport->name);
- if(video_register_device(&qcam->vdev, VFL_TYPE_GRABBER, video_nr)==-1)
- {
+ if (video_register_device(&qcam->vdev, VFL_TYPE_GRABBER, video_nr) < 0) {
parport_unregister_device(qcam->pdev);
kfree(qcam);
return -ENODEV;
parport_release(qcam->pdev);
- if (video_register_device(&qcam->vdev, VFL_TYPE_GRABBER, video_nr)==-1)
- {
+ if (video_register_device(&qcam->vdev, VFL_TYPE_GRABBER, video_nr) < 0) {
printk(KERN_ERR "Unable to register Colour QuickCam on %s\n",
qcam->pport->name);
parport_unregister_device(qcam->pdev);
camera->lowlevel_data = lowlevel;
/* register v4l device */
- if (video_register_device(&camera->vdev, VFL_TYPE_GRABBER, video_nr) == -1) {
+ if (video_register_device(&camera->vdev, VFL_TYPE_GRABBER, video_nr) < 0) {
kfree(camera);
printk(KERN_DEBUG "video_register_device failed\n");
return NULL;
if(cam->params.pnp_id.device_type == DEVICE_STV_672 &&
cam->params.version.sensor_flags==CPIA2_VP_SENSOR_FLAGS_500){
// Maximum 15fps
- int i;
for(i=0; i<c->maximum; ++i) {
if(framerate_controls[i].value ==
CPIA2_VP_FRAMERATE_15) {
reset_camera_struct_v4l(cam);
/* register v4l device */
- if (video_register_device
- (cam->vdev, VFL_TYPE_GRABBER, video_nr) == -1) {
+ if (video_register_device(cam->vdev, VFL_TYPE_GRABBER, video_nr) < 0) {
ERR("video_register_device failed\n");
video_device_release(cam->vdev);
return -ENODEV;
u32 v;
const u8 *ptr;
int i;
- int retries = 0;
+ int retries1 = 0;
if (request_firmware(&fw, FWFILE, &cx->dev->dev) != 0) {
CX18_ERR("unable to open firmware %s\n", FWFILE);
/* The firmware load often has byte errors, so allow for several
retries, both at byte level and at the firmware load level. */
- while (retries < 5) {
+ while (retries1 < 5) {
cx18_av_write4(cx, CXADEC_CHIP_CTRL, 0x00010000);
cx18_av_write(cx, CXADEC_STD_DET_CTL, 0xf6);
for (i = 0; i < size; i++) {
u32 dl_control = 0x0F000000 | i | ((u32)ptr[i] << 16);
u32 value = 0;
- int retries;
+ int retries2;
- for (retries = 0; retries < 5; retries++) {
+ for (retries2 = 0; retries2 < 5; retries2++) {
cx18_av_write4(cx, CXADEC_DL_CTL, dl_control);
udelay(10);
value = cx18_av_read4(cx, CXADEC_DL_CTL);
the address. We can only write the lower
address byte of the address. */
if ((value & 0x3F00) != (dl_control & 0x3F00)) {
- retries = 5;
+ retries2 = 5;
break;
}
}
- if (retries >= 5)
+ if (retries2 >= 5)
break;
}
if (i == size)
break;
- retries++;
+ retries1++;
}
- if (retries >= 5) {
+ if (retries1 >= 5) {
CX18_ERR("unable to load firmware %s\n", FWFILE);
release_firmware(fw);
return -EIO;
-1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1, -1 };
-static int cardtype_c = 1;
-static int tuner_c = 1;
-static int radio_c = 1;
+static unsigned cardtype_c = 1;
+static unsigned tuner_c = 1;
+static unsigned radio_c = 1;
static char pal[] = "--";
static char secam[] = "--";
static char ntsc[] = "-";
/*
* cx18 functions for DVB support
*
- * Copyright (c) 2008 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2008 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
/*
* cx18 functions for DVB support
*
- * Copyright (c) 2008 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2008 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
CX18_WARN("Ack struct = %d for %s\n",
mb->args[2], s->name);
id = read_enc(off);
- buf = cx18_queue_find_buf(s, id, read_enc(off + 4));
+ buf = cx18_queue_get_buf_irq(s, id, read_enc(off + 4));
CX18_DEBUG_HI_DMA("DMA DONE for %s (buffer %d)\n", s->name, id);
if (buf) {
cx18_buf_sync_for_cpu(s, buf);
return buf;
}
-struct cx18_buffer *cx18_queue_find_buf(struct cx18_stream *s, u32 id,
+struct cx18_buffer *cx18_queue_get_buf_irq(struct cx18_stream *s, u32 id,
u32 bytesused)
{
struct cx18 *cx = s->cx;
struct list_head *p;
+ spin_lock(&s->qlock);
list_for_each(p, &s->q_free.list) {
struct cx18_buffer *buf =
list_entry(p, struct cx18_buffer, list);
continue;
buf->bytesused = bytesused;
/* the transport buffers are handled differently,
- so there is no need to move them to the full queue */
- if (s->type == CX18_ENC_STREAM_TYPE_TS)
- return buf;
- s->q_free.buffers--;
- s->q_free.length -= s->buf_size;
- s->q_full.buffers++;
- s->q_full.length += s->buf_size;
- s->q_full.bytesused += buf->bytesused;
- list_move_tail(&buf->list, &s->q_full.list);
+ they are not moved to the full queue */
+ if (s->type != CX18_ENC_STREAM_TYPE_TS) {
+ s->q_free.buffers--;
+ s->q_free.length -= s->buf_size;
+ s->q_full.buffers++;
+ s->q_full.length += s->buf_size;
+ s->q_full.bytesused += buf->bytesused;
+ list_move_tail(&buf->list, &s->q_full.list);
+ }
+ spin_unlock(&s->qlock);
return buf;
}
+ spin_unlock(&s->qlock);
CX18_ERR("Cannot find buffer %d for stream %s\n", id, s->name);
return NULL;
}
-static void cx18_queue_move_buf(struct cx18_stream *s, struct cx18_queue *from,
- struct cx18_queue *to, int clear, int full)
-{
- struct cx18_buffer *buf =
- list_entry(from->list.next, struct cx18_buffer, list);
-
- list_move_tail(from->list.next, &to->list);
- from->buffers--;
- from->length -= s->buf_size;
- from->bytesused -= buf->bytesused - buf->readpos;
- /* special handling for q_free */
- if (clear)
- buf->bytesused = buf->readpos = buf->b_flags = 0;
- else if (full) {
- /* special handling for stolen buffers, assume
- all bytes are used. */
- buf->bytesused = s->buf_size;
- buf->readpos = buf->b_flags = 0;
- }
- to->buffers++;
- to->length += s->buf_size;
- to->bytesused += buf->bytesused - buf->readpos;
-}
-
-/* Move 'needed_bytes' worth of buffers from queue 'from' into queue 'to'.
- If 'needed_bytes' == 0, then move all buffers from 'from' into 'to'.
- If 'steal' != NULL, then buffers may also taken from that queue if
- needed.
-
- The buffer is automatically cleared if it goes to the free queue. It is
- also cleared if buffers need to be taken from the 'steal' queue and
- the 'from' queue is the free queue.
-
- When 'from' is q_free, then needed_bytes is compared to the total
- available buffer length, otherwise needed_bytes is compared to the
- bytesused value. For the 'steal' queue the total available buffer
- length is always used.
-
- -ENOMEM is returned if the buffers could not be obtained, 0 if all
- buffers where obtained from the 'from' list and if non-zero then
- the number of stolen buffers is returned. */
-static int cx18_queue_move(struct cx18_stream *s, struct cx18_queue *from,
- struct cx18_queue *steal, struct cx18_queue *to,
- int needed_bytes)
+/* Move all buffers of a queue to q_free, while flushing the buffers */
+static void cx18_queue_flush(struct cx18_stream *s, struct cx18_queue *q)
{
unsigned long flags;
- int rc = 0;
- int from_free = from == &s->q_free;
- int to_free = to == &s->q_free;
- int bytes_available;
-
- spin_lock_irqsave(&s->qlock, flags);
- if (needed_bytes == 0) {
- from_free = 1;
- needed_bytes = from->length;
- }
-
- bytes_available = from_free ? from->length : from->bytesused;
- bytes_available += steal ? steal->length : 0;
+ struct cx18_buffer *buf;
- if (bytes_available < needed_bytes) {
- spin_unlock_irqrestore(&s->qlock, flags);
- return -ENOMEM;
- }
- if (from_free) {
- u32 old_length = to->length;
+ if (q == &s->q_free)
+ return;
- while (to->length - old_length < needed_bytes) {
- if (list_empty(&from->list))
- from = steal;
- if (from == steal)
- rc++; /* keep track of 'stolen' buffers */
- cx18_queue_move_buf(s, from, to, 1, 0);
- }
- } else {
- u32 old_bytesused = to->bytesused;
-
- while (to->bytesused - old_bytesused < needed_bytes) {
- if (list_empty(&from->list))
- from = steal;
- if (from == steal)
- rc++; /* keep track of 'stolen' buffers */
- cx18_queue_move_buf(s, from, to, to_free, rc);
- }
+ spin_lock_irqsave(&s->qlock, flags);
+ while (!list_empty(&q->list)) {
+ buf = list_entry(q->list.next, struct cx18_buffer, list);
+ list_move_tail(q->list.next, &s->q_free.list);
+ buf->bytesused = buf->readpos = buf->b_flags = 0;
+ s->q_free.buffers++;
+ s->q_free.length += s->buf_size;
}
+ cx18_queue_init(q);
spin_unlock_irqrestore(&s->qlock, flags);
- return rc;
}
void cx18_flush_queues(struct cx18_stream *s)
{
- cx18_queue_move(s, &s->q_io, NULL, &s->q_free, 0);
- cx18_queue_move(s, &s->q_full, NULL, &s->q_free, 0);
+ cx18_queue_flush(s, &s->q_io);
+ cx18_queue_flush(s, &s->q_full);
}
int cx18_stream_alloc(struct cx18_stream *s)
s->name, s->buffers, s->buf_size,
s->buffers * s->buf_size / 1024);
- if (((char *)&cx->scb->cpu_mdl[cx->mdl_offset + s->buffers] -
- (char *)cx->scb) > SCB_RESERVED_SIZE) {
- unsigned bufsz = (((char *)cx->scb) + SCB_RESERVED_SIZE -
- ((char *)cx->scb->cpu_mdl));
+ if (((char __iomem *)&cx->scb->cpu_mdl[cx->mdl_offset + s->buffers] -
+ (char __iomem *)cx->scb) > SCB_RESERVED_SIZE) {
+ unsigned bufsz = (((char __iomem *)cx->scb) + SCB_RESERVED_SIZE -
+ ((char __iomem *)cx->scb->cpu_mdl));
CX18_ERR("Too many buffers, cannot fit in SCB area\n");
CX18_ERR("Max buffers = %zd\n",
void cx18_enqueue(struct cx18_stream *s, struct cx18_buffer *buf,
struct cx18_queue *q);
struct cx18_buffer *cx18_dequeue(struct cx18_stream *s, struct cx18_queue *q);
-struct cx18_buffer *cx18_queue_find_buf(struct cx18_stream *s, u32 id,
+struct cx18_buffer *cx18_queue_get_buf_irq(struct cx18_stream *s, u32 id,
u32 bytesused);
void cx18_flush_queues(struct cx18_stream *s);
*
* (c) 2004 Jelle Foks <jelle@foks.8m.com>
* (c) 2004 Gerd Knorr <kraxel@bytesex.org>
- * (c) 2008 Steven Toth <stoth@hauppauge.com>
+ * (c) 2008 Steven Toth <stoth@linuxtv.org>
* - CX23885/7/8 support
*
* Includes parts from the ivtv driver( http://ivtv.sourceforge.net/),
/*
* Driver for the Conexant CX23885 PCIe bridge
*
- * Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
/*
* Driver for the Conexant CX23885 PCIe bridge
*
- * Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#include "cx23885.h"
MODULE_DESCRIPTION("Driver for cx23885 based TV cards");
-MODULE_AUTHOR("Steven Toth <stoth@hauppauge.com>");
+MODULE_AUTHOR("Steven Toth <stoth@linuxtv.org>");
MODULE_LICENSE("GPL");
static unsigned int debug;
/*
* Driver for the Conexant CX23885 PCIe bridge
*
- * Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
/*
* Driver for the Conexant CX23885 PCIe bridge
*
- * Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
/*
* Driver for the Conexant CX23885 PCIe bridge
*
- * Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
/*
* Driver for the Conexant CX23885 PCIe bridge
*
- * Copyright (c) 2007 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2007 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
/*
* Driver for the Conexant CX23885 PCIe bridge
*
- * Copyright (c) 2007 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2007 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#endif
MODULE_DESCRIPTION("v4l2 driver module for cx23885 based TV cards");
-MODULE_AUTHOR("Steven Toth <stoth@hauppauge.com>");
+MODULE_AUTHOR("Steven Toth <stoth@linuxtv.org>");
MODULE_LICENSE("GPL");
/* ------------------------------------------------------------------ */
/*
* Driver for the Conexant CX23885 PCIe bridge
*
- * Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* NTSC sliced VBI support by Christopher Neufeld <television@cneufeld.ca>
* with additional fixes by Hans Verkuil <hverkuil@xs4all.nl>.
*
- * CX23885 support by Steven Toth <stoth@hauppauge.com>.
+ * CX23885 support by Steven Toth <stoth@linuxtv.org>.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
ret = request_firmware(&fw, "dabusb/bitstream.bin", &s->usbdev->dev);
if (ret) {
err("Failed to load \"dabusb/bitstream.bin\": %d\n", ret);
+ kfree(b);
return ret;
}
cam->v4ldev->fops = &et61x251_fops;
cam->v4ldev->minor = video_nr[dev_nr];
cam->v4ldev->release = video_device_release;
+ cam->v4ldev->parent = &udev->dev;
video_set_drvdata(cam->v4ldev, cam);
init_completion(&cam->probe);
struct usb_device *dev = gspca_dev->dev;
#ifdef GSPCA_DEBUG
- if (len > sizeof gspca_dev->usb_buf) {
+ if (len > USB_BUF_SZ) {
err("reg_r: buffer overflow");
return;
}
struct usb_device *dev = gspca_dev->dev;
#ifdef GSPCA_DEBUG
- if (len > sizeof gspca_dev->usb_buf) {
+ if (len > USB_BUF_SZ) {
err("reg_w: buffer overflow");
return;
}
reg_w_val(gspca_dev, 0x0000, 0x00);
/* wait for completion */
retry = 50;
- while (retry--) {
+ do {
reg_r(gspca_dev, 0x0002, 1);
/* 0x07 until 0x00 */
if (gspca_dev->usb_buf[0] == 0x00)
break;
reg_w_val(gspca_dev, 0x0053, 0x00);
- }
+ } while (--retry);
if (retry == 0)
PDEBUG(D_ERR, "Damned Errors sending jpeg Table");
/* send the qtable now */
return 0;
}
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
{
cx11646_init1(gspca_dev);
cx11646_initsize(gspca_dev);
cx11646_jpeg(gspca_dev);
}
-static void sd_stopN(struct gspca_dev *gspca_dev)
-{
-}
-
static void sd_stop0(struct gspca_dev *gspca_dev)
{
int retry = 50;
reg_w_val(gspca_dev, 0x00fc, 0xe0);
}
-static void sd_close(struct gspca_dev *gspca_dev)
-{
-}
-
static void sd_pkt_scan(struct gspca_dev *gspca_dev,
struct gspca_frame *frame, /* target */
__u8 *data, /* isoc packet */
.ctrls = sd_ctrls,
.nctrls = ARRAY_SIZE(sd_ctrls),
.config = sd_config,
- .open = sd_open,
+ .init = sd_init,
.start = sd_start,
- .stopN = sd_stopN,
.stop0 = sd_stop0,
- .close = sd_close,
.pkt_scan = sd_pkt_scan,
};
.id_table = device_table,
.probe = sd_probe,
.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+ .suspend = gspca_suspend,
+ .resume = gspca_resume,
+#endif
};
/* -- module insert / remove -- */
.set = sd_setcontrast,
.get = sd_getcontrast,
},
+#define COLOR_IDX 2
{
{
.id = V4L2_CID_SATURATION,
struct usb_device *dev = gspca_dev->dev;
#ifdef GSPCA_DEBUG
- if (len > sizeof gspca_dev->usb_buf) {
+ if (len > USB_BUF_SZ) {
err("reg_r: buffer overflow");
return;
}
struct usb_device *dev = gspca_dev->dev;
#ifdef GSPCA_DEBUG
- if (len > sizeof gspca_dev->usb_buf) {
+ if (len > USB_BUF_SZ) {
err("reg_w: buffer overflow");
return;
}
} else {
cam->cam_mode = vga_mode;
cam->nmodes = sizeof vga_mode / sizeof vga_mode[0];
+ gspca_dev->ctrl_dis = (1 << COLOR_IDX);
}
sd->brightness = BRIGHTNESS_DEF;
sd->contrast = CONTRAST_DEF;
return 0;
}
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
et_video(gspca_dev, 0); /* video off */
}
-static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-}
-
-static void sd_close(struct gspca_dev *gspca_dev)
-{
-}
-
static __u8 Et_getgainG(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
.ctrls = sd_ctrls,
.nctrls = ARRAY_SIZE(sd_ctrls),
.config = sd_config,
- .open = sd_open,
+ .init = sd_init,
.start = sd_start,
.stopN = sd_stopN,
- .stop0 = sd_stop0,
- .close = sd_close,
.pkt_scan = sd_pkt_scan,
.dq_callback = do_autogain,
};
/* -- module initialisation -- */
static __devinitdata struct usb_device_id device_table[] = {
-#ifndef CONFIG_USB_ET61X251
{USB_DEVICE(0x102c, 0x6151), .driver_info = SENSOR_PAS106},
-#endif
+#if !defined CONFIG_USB_ET61X251 && !defined CONFIG_USB_ET61X251_MODULE
{USB_DEVICE(0x102c, 0x6251), .driver_info = SENSOR_TAS5130CXX},
+#endif
{}
};
.id_table = device_table,
.probe = sd_probe,
.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+ .suspend = gspca_suspend,
+ .resume = gspca_resume,
+#endif
};
/* -- module insert / remove -- */
cam_pkt_op pkt_scan;
if (urb->status != 0) {
- PDEBUG(D_ERR|D_PACK, "urb status: %d", urb->status);
+#ifdef CONFIG_PM
+ if (!gspca_dev->frozen)
+#endif
+ PDEBUG(D_ERR|D_PACK, "urb status: %d", urb->status);
return; /* disconnection ? */
}
pkt_scan = gspca_dev->sd_desc->pkt_scan;
gspca_dev->streaming = 0;
atomic_set(&gspca_dev->nevent, 0);
if (gspca_dev->present) {
- gspca_dev->sd_desc->stopN(gspca_dev);
+ if (gspca_dev->sd_desc->stopN)
+ gspca_dev->sd_desc->stopN(gspca_dev);
destroy_urbs(gspca_dev);
gspca_set_alt0(gspca_dev);
- gspca_dev->sd_desc->stop0(gspca_dev);
+ if (gspca_dev->sd_desc->stop0)
+ gspca_dev->sd_desc->stop0(gspca_dev);
PDEBUG(D_STREAM, "stream off OK");
}
}
goto out;
}
- /* if not done yet, initialize the sensor */
- if (gspca_dev->users == 0) {
- if (mutex_lock_interruptible(&gspca_dev->usb_lock)) {
- ret = -ERESTARTSYS;
- goto out;
- }
- ret = gspca_dev->sd_desc->open(gspca_dev);
- mutex_unlock(&gspca_dev->usb_lock);
- if (ret != 0) {
- PDEBUG(D_ERR|D_CONF, "init device failed %d", ret);
- goto out;
- }
- } else if (gspca_dev->users > 4) { /* (arbitrary value) */
+ if (gspca_dev->users > 4) { /* (arbitrary value) */
ret = -EBUSY;
goto out;
}
else
gspca_dev->vdev.debug &= ~3;
#endif
+ ret = 0;
out:
mutex_unlock(&gspca_dev->queue_lock);
if (ret != 0)
/* if the file did the capture, free the streaming resources */
if (gspca_dev->capt_file == file) {
- mutex_lock(&gspca_dev->usb_lock);
- if (gspca_dev->streaming)
+ if (gspca_dev->streaming) {
+ mutex_lock(&gspca_dev->usb_lock);
gspca_stream_off(gspca_dev);
- gspca_dev->sd_desc->close(gspca_dev);
- mutex_unlock(&gspca_dev->usb_lock);
+ mutex_unlock(&gspca_dev->usb_lock);
+ }
frame_free(gspca_dev);
gspca_dev->capt_file = NULL;
gspca_dev->memory = GSPCA_MEMORY_NO;
return 0;
}
-/* the use of V4L2_CTRL_FLAG_NEXT_CTRL asks for the controls to be sorted */
static int vidioc_queryctrl(struct file *file, void *priv,
struct v4l2_queryctrl *q_ctrl)
{
struct gspca_dev *gspca_dev = priv;
- int i;
+ int i, ix;
u32 id;
+ ix = -1;
id = q_ctrl->id;
if (id & V4L2_CTRL_FLAG_NEXT_CTRL) {
id &= V4L2_CTRL_ID_MASK;
id++;
for (i = 0; i < gspca_dev->sd_desc->nctrls; i++) {
- if (id >= gspca_dev->sd_desc->ctrls[i].qctrl.id) {
- memcpy(q_ctrl,
- &gspca_dev->sd_desc->ctrls[i].qctrl,
- sizeof *q_ctrl);
- return 0;
+ if (gspca_dev->sd_desc->ctrls[i].qctrl.id < id)
+ continue;
+ if (ix < 0) {
+ ix = i;
+ continue;
}
+ if (gspca_dev->sd_desc->ctrls[i].qctrl.id
+ > gspca_dev->sd_desc->ctrls[ix].qctrl.id)
+ continue;
+ ix = i;
}
- return -EINVAL;
}
for (i = 0; i < gspca_dev->sd_desc->nctrls; i++) {
if (id == gspca_dev->sd_desc->ctrls[i].qctrl.id) {
- memcpy(q_ctrl,
- &gspca_dev->sd_desc->ctrls[i].qctrl,
- sizeof *q_ctrl);
- return 0;
+ ix = i;
+ break;
}
}
- if (id >= V4L2_CID_BASE
- && id <= V4L2_CID_LASTP1) {
+ if (ix < 0)
+ return -EINVAL;
+ memcpy(q_ctrl, &gspca_dev->sd_desc->ctrls[ix].qctrl,
+ sizeof *q_ctrl);
+ if (gspca_dev->ctrl_dis & (1 << ix))
q_ctrl->flags |= V4L2_CTRL_FLAG_DISABLED;
- return 0;
- }
- return -EINVAL;
+ return 0;
}
static int vidioc_s_ctrl(struct file *file, void *priv,
i++, ctrls++) {
if (ctrl->id != ctrls->qctrl.id)
continue;
+ if (gspca_dev->ctrl_dis & (1 << i))
+ return -EINVAL;
if (ctrl->value < ctrls->qctrl.minimum
|| ctrl->value > ctrls->qctrl.maximum)
return -ERANGE;
i++, ctrls++) {
if (ctrl->id != ctrls->qctrl.id)
continue;
+ if (gspca_dev->ctrl_dis & (1 << i))
+ return -EINVAL;
if (mutex_lock_interruptible(&gspca_dev->usb_lock))
return -ERESTARTSYS;
ret = ctrls->get(gspca_dev, &ctrl->value);
i = ret; /* frame index */
frame = &gspca_dev->frame[i];
if (gspca_dev->memory == V4L2_MEMORY_USERPTR) {
- if (copy_to_user((__u8 *) frame->v4l2_buf.m.userptr,
+ if (copy_to_user((__u8 __user *) frame->v4l2_buf.m.userptr,
frame->data,
frame->v4l2_buf.bytesused)) {
PDEBUG(D_ERR|D_STREAM,
err("couldn't kzalloc gspca struct");
return -EIO;
}
+ gspca_dev->usb_buf = kmalloc(USB_BUF_SZ, GFP_KERNEL);
+ if (!gspca_dev->usb_buf) {
+ err("out of memory");
+ ret = -EIO;
+ goto out;
+ }
gspca_dev->dev = dev;
gspca_dev->iface = interface->bInterfaceNumber;
gspca_dev->nbalt = intf->num_altsetting;
/* gspca_dev->users = 0; (done by kzalloc) */
gspca_dev->nbufread = 2;
- /* configure the subdriver */
+ /* configure the subdriver and initialize the USB device */
ret = gspca_dev->sd_desc->config(gspca_dev, id);
+ if (ret < 0)
+ goto out;
+ ret = gspca_dev->sd_desc->init(gspca_dev);
if (ret < 0)
goto out;
ret = gspca_set_alt0(gspca_dev);
PDEBUG(D_PROBE, "probe ok");
return 0;
out:
+ kfree(gspca_dev->usb_buf);
kfree(gspca_dev);
return ret;
}
/* We don't want people trying to open up the device */
video_unregister_device(&gspca_dev->vdev);
/* Free the memory */
+ kfree(gspca_dev->usb_buf);
kfree(gspca_dev);
PDEBUG(D_PROBE, "disconnect complete");
}
EXPORT_SYMBOL(gspca_disconnect);
+#ifdef CONFIG_PM
+int gspca_suspend(struct usb_interface *intf, pm_message_t message)
+{
+ struct gspca_dev *gspca_dev = usb_get_intfdata(intf);
+
+ if (!gspca_dev->streaming)
+ return 0;
+ gspca_dev->frozen = 1; /* avoid urb error messages */
+ if (gspca_dev->sd_desc->stopN)
+ gspca_dev->sd_desc->stopN(gspca_dev);
+ destroy_urbs(gspca_dev);
+ gspca_set_alt0(gspca_dev);
+ if (gspca_dev->sd_desc->stop0)
+ gspca_dev->sd_desc->stop0(gspca_dev);
+ return 0;
+}
+EXPORT_SYMBOL(gspca_suspend);
+
+int gspca_resume(struct usb_interface *intf)
+{
+ struct gspca_dev *gspca_dev = usb_get_intfdata(intf);
+
+ gspca_dev->frozen = 0;
+ gspca_dev->sd_desc->init(gspca_dev);
+ if (gspca_dev->streaming)
+ return gspca_init_transfer(gspca_dev);
+ return 0;
+}
+EXPORT_SYMBOL(gspca_resume);
+#endif
/* -- cam driver utility functions -- */
/* auto gain and exposure algorithm based on the knee algorithm described here:
/* device information - set at probe time */
struct cam {
- char *dev_name;
struct v4l2_pix_format *cam_mode; /* size nmodes */
char nmodes;
__u8 epaddr;
/* controls */
const struct ctrl *ctrls;
int nctrls;
-/* operations */
+/* mandatory operations */
cam_cf_op config; /* called on probe */
- cam_op open; /* called on open */
+ cam_op init; /* called on probe and resume */
cam_v_op start; /* called on stream on */
- cam_v_op stopN; /* called on stream off - main alt */
- cam_v_op stop0; /* called on stream off - alt 0 */
- cam_v_op close; /* called on close */
cam_pkt_op pkt_scan;
/* optional operations */
+ cam_v_op stopN; /* called on stream off - main alt */
+ cam_v_op stop0; /* called on stream off - alt 0 */
cam_v_op dq_callback; /* called when a frame has been dequeued */
cam_jpg_op get_jcomp;
cam_jpg_op set_jcomp;
struct cam cam; /* device information */
const struct sd_desc *sd_desc; /* subdriver description */
+ unsigned ctrl_dis; /* disabled controls (bit map) */
- __u8 usb_buf[8]; /* buffer for USB exchanges */
+#define USB_BUF_SZ 64
+ __u8 *usb_buf; /* buffer for USB exchanges */
struct urb *urb[MAX_NURBS];
__u8 *frbuf; /* buffer for nframes */
struct mutex queue_lock; /* ISOC queue protection */
__u32 sequence; /* frame sequence number */
char streaming;
+#ifdef CONFIG_PM
+ char frozen; /* suspend - resume */
+#endif
char users; /* number of opens */
char present; /* device connected */
char nbufread; /* number of buffers for read() */
struct gspca_frame *frame,
const __u8 *data,
int len);
+#ifdef CONFIG_PM
+int gspca_suspend(struct usb_interface *intf, pm_message_t message);
+int gspca_resume(struct usb_interface *intf);
+#endif
int gspca_auto_gain_n_exposure(struct gspca_dev *gspca_dev, int avg_lum,
int desired_avg_lum, int deadzone, int gain_knee, int exposure_knee);
#endif /* GSPCAV2_H */
return rc;
}
-static int reg_w_buf(struct gspca_dev *gspca_dev,
- __u16 index, __u8 *buf, int len)
-{
- int rc;
-
- rc = usb_control_msg(gspca_dev->dev,
- usb_sndbulkpipe(gspca_dev->dev, 4),
- 0x12,
- 0xc8, /* ?? */
- 0, /* value */
- index, buf, len, 500);
- if (rc < 0)
- PDEBUG(D_ERR, "reg write [%02x] error %d", index, rc);
- return rc;
-}
-
static void bulk_w(struct gspca_dev *gspca_dev,
__u16 *pch,
__u16 Address)
return 0;
}
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
{
return 0;
}
/*
Initialize the MR97113 chip register
*/
- data = kmalloc(16, GFP_KERNEL);
data[0] = 0x00; /* address */
data[1] = 0x0c | 0x01; /* reg 0 */
data[2] = 0x01; /* reg 1 */
data[10] = 0x5d; /* reg 9, I2C device address
* [for PAS5101 (0x40)] [for MI (0x5d)] */
- err_code = reg_w_buf(gspca_dev, data[0], data, 11);
- kfree(data);
+ err_code = reg_w(gspca_dev, data[0], 11);
if (err_code < 0)
return;
- data = gspca_dev->usb_buf;
data[0] = 0x23; /* address */
data[1] = 0x09; /* reg 35, append frame header */
PDEBUG(D_ERR, "Camera Stop failed");
}
-static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-}
-
-static void sd_close(struct gspca_dev *gspca_dev)
-{
-}
-
static void sd_pkt_scan(struct gspca_dev *gspca_dev,
struct gspca_frame *frame, /* target */
__u8 *data, /* isoc packet */
.ctrls = sd_ctrls,
.nctrls = ARRAY_SIZE(sd_ctrls),
.config = sd_config,
- .open = sd_open,
+ .init = sd_init,
.start = sd_start,
.stopN = sd_stopN,
- .stop0 = sd_stop0,
- .close = sd_close,
.pkt_scan = sd_pkt_scan,
};
.id_table = device_table,
.probe = sd_probe,
.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+ .suspend = gspca_suspend,
+ .resume = gspca_resume,
+#endif
};
/* -- module insert / remove -- */
#define SEN_OV6630 2
#define SEN_OV7610 3
#define SEN_OV7620 4
-#define SEN_OV7630 5
-#define SEN_OV7640 6
-#define SEN_OV7670 7
-#define SEN_OV76BE 8
-#define SEN_OV8610 9
+#define SEN_OV7640 5
+#define SEN_OV7670 6
+#define SEN_OV76BE 7
+#define SEN_OV8610 8
};
.get = sd_getcolors,
},
/* next controls work with ov7670 only */
+#define HFLIP_IDX 3
{
{
.id = V4L2_CID_HFLIP,
.set = sd_sethflip,
.get = sd_gethflip,
},
+#define VFLIP_IDX 4
{
{
.id = V4L2_CID_VFLIP,
#define OV7670_REG_HAECC7 0xaa /* Hist AEC/AGC control 7 */
#define OV7670_REG_BD60MAX 0xab /* 60hz banding step limit */
+struct ov_regvals {
+ __u8 reg;
+ __u8 val;
+};
+struct ov_i2c_regvals {
+ __u8 reg;
+ __u8 val;
+};
+
+static const struct ov_i2c_regvals norm_6x20[] = {
+ { 0x12, 0x80 }, /* reset */
+ { 0x11, 0x01 },
+ { 0x03, 0x60 },
+ { 0x05, 0x7f }, /* For when autoadjust is off */
+ { 0x07, 0xa8 },
+ /* The ratio of 0x0c and 0x0d controls the white point */
+ { 0x0c, 0x24 },
+ { 0x0d, 0x24 },
+ { 0x0f, 0x15 }, /* COMS */
+ { 0x10, 0x75 }, /* AEC Exposure time */
+ { 0x12, 0x24 }, /* Enable AGC */
+ { 0x14, 0x04 },
+ /* 0x16: 0x06 helps frame stability with moving objects */
+ { 0x16, 0x06 },
+/* { 0x20, 0x30 }, * Aperture correction enable */
+ { 0x26, 0xb2 }, /* BLC enable */
+ /* 0x28: 0x05 Selects RGB format if RGB on */
+ { 0x28, 0x05 },
+ { 0x2a, 0x04 }, /* Disable framerate adjust */
+/* { 0x2b, 0xac }, * Framerate; Set 2a[7] first */
+ { 0x2d, 0x99 },
+ { 0x33, 0xa0 }, /* Color Processing Parameter */
+ { 0x34, 0xd2 }, /* Max A/D range */
+ { 0x38, 0x8b },
+ { 0x39, 0x40 },
+
+ { 0x3c, 0x39 }, /* Enable AEC mode changing */
+ { 0x3c, 0x3c }, /* Change AEC mode */
+ { 0x3c, 0x24 }, /* Disable AEC mode changing */
+
+ { 0x3d, 0x80 },
+ /* These next two registers (0x4a, 0x4b) are undocumented.
+ * They control the color balance */
+ { 0x4a, 0x80 },
+ { 0x4b, 0x80 },
+ { 0x4d, 0xd2 }, /* This reduces noise a bit */
+ { 0x4e, 0xc1 },
+ { 0x4f, 0x04 },
+/* Do 50-53 have any effect? */
+/* Toggle 0x12[2] off and on here? */
+};
+
+static const struct ov_i2c_regvals norm_6x30[] = {
+ { 0x12, 0x80 }, /* Reset */
+ { 0x00, 0x1f }, /* Gain */
+ { 0x01, 0x99 }, /* Blue gain */
+ { 0x02, 0x7c }, /* Red gain */
+ { 0x03, 0xc0 }, /* Saturation */
+ { 0x05, 0x0a }, /* Contrast */
+ { 0x06, 0x95 }, /* Brightness */
+ { 0x07, 0x2d }, /* Sharpness */
+ { 0x0c, 0x20 },
+ { 0x0d, 0x20 },
+ { 0x0e, 0x20 },
+ { 0x0f, 0x05 },
+ { 0x10, 0x9a },
+ { 0x11, 0x00 }, /* Pixel clock = fastest */
+ { 0x12, 0x24 }, /* Enable AGC and AWB */
+ { 0x13, 0x21 },
+ { 0x14, 0x80 },
+ { 0x15, 0x01 },
+ { 0x16, 0x03 },
+ { 0x17, 0x38 },
+ { 0x18, 0xea },
+ { 0x19, 0x04 },
+ { 0x1a, 0x93 },
+ { 0x1b, 0x00 },
+ { 0x1e, 0xc4 },
+ { 0x1f, 0x04 },
+ { 0x20, 0x20 },
+ { 0x21, 0x10 },
+ { 0x22, 0x88 },
+ { 0x23, 0xc0 }, /* Crystal circuit power level */
+ { 0x25, 0x9a }, /* Increase AEC black ratio */
+ { 0x26, 0xb2 }, /* BLC enable */
+ { 0x27, 0xa2 },
+ { 0x28, 0x00 },
+ { 0x29, 0x00 },
+ { 0x2a, 0x84 }, /* 60 Hz power */
+ { 0x2b, 0xa8 }, /* 60 Hz power */
+ { 0x2c, 0xa0 },
+ { 0x2d, 0x95 }, /* Enable auto-brightness */
+ { 0x2e, 0x88 },
+ { 0x33, 0x26 },
+ { 0x34, 0x03 },
+ { 0x36, 0x8f },
+ { 0x37, 0x80 },
+ { 0x38, 0x83 },
+ { 0x39, 0x80 },
+ { 0x3a, 0x0f },
+ { 0x3b, 0x3c },
+ { 0x3c, 0x1a },
+ { 0x3d, 0x80 },
+ { 0x3e, 0x80 },
+ { 0x3f, 0x0e },
+ { 0x40, 0x00 }, /* White bal */
+ { 0x41, 0x00 }, /* White bal */
+ { 0x42, 0x80 },
+ { 0x43, 0x3f }, /* White bal */
+ { 0x44, 0x80 },
+ { 0x45, 0x20 },
+ { 0x46, 0x20 },
+ { 0x47, 0x80 },
+ { 0x48, 0x7f },
+ { 0x49, 0x00 },
+ { 0x4a, 0x00 },
+ { 0x4b, 0x80 },
+ { 0x4c, 0xd0 },
+ { 0x4d, 0x10 }, /* U = 0.563u, V = 0.714v */
+ { 0x4e, 0x40 },
+ { 0x4f, 0x07 }, /* UV avg., col. killer: max */
+ { 0x50, 0xff },
+ { 0x54, 0x23 }, /* Max AGC gain: 18dB */
+ { 0x55, 0xff },
+ { 0x56, 0x12 },
+ { 0x57, 0x81 },
+ { 0x58, 0x75 },
+ { 0x59, 0x01 }, /* AGC dark current comp.: +1 */
+ { 0x5a, 0x2c },
+ { 0x5b, 0x0f }, /* AWB chrominance levels */
+ { 0x5c, 0x10 },
+ { 0x3d, 0x80 },
+ { 0x27, 0xa6 },
+ { 0x12, 0x20 }, /* Toggle AWB */
+ { 0x12, 0x24 },
+};
+
+/* Lawrence Glaister <lg@jfm.bc.ca> reports:
+ *
+ * Register 0x0f in the 7610 has the following effects:
+ *
+ * 0x85 (AEC method 1): Best overall, good contrast range
+ * 0x45 (AEC method 2): Very overexposed
+ * 0xa5 (spec sheet default): Ok, but the black level is
+ * shifted resulting in loss of contrast
+ * 0x05 (old driver setting): very overexposed, too much
+ * contrast
+ */
+static const struct ov_i2c_regvals norm_7610[] = {
+ { 0x10, 0xff },
+ { 0x16, 0x06 },
+ { 0x28, 0x24 },
+ { 0x2b, 0xac },
+ { 0x12, 0x00 },
+ { 0x38, 0x81 },
+ { 0x28, 0x24 }, /* 0c */
+ { 0x0f, 0x85 }, /* lg's setting */
+ { 0x15, 0x01 },
+ { 0x20, 0x1c },
+ { 0x23, 0x2a },
+ { 0x24, 0x10 },
+ { 0x25, 0x8a },
+ { 0x26, 0xa2 },
+ { 0x27, 0xc2 },
+ { 0x2a, 0x04 },
+ { 0x2c, 0xfe },
+ { 0x2d, 0x93 },
+ { 0x30, 0x71 },
+ { 0x31, 0x60 },
+ { 0x32, 0x26 },
+ { 0x33, 0x20 },
+ { 0x34, 0x48 },
+ { 0x12, 0x24 },
+ { 0x11, 0x01 },
+ { 0x0c, 0x24 },
+ { 0x0d, 0x24 },
+};
+
+static const struct ov_i2c_regvals norm_7620[] = {
+ { 0x00, 0x00 }, /* gain */
+ { 0x01, 0x80 }, /* blue gain */
+ { 0x02, 0x80 }, /* red gain */
+ { 0x03, 0xc0 }, /* OV7670_REG_VREF */
+ { 0x06, 0x60 },
+ { 0x07, 0x00 },
+ { 0x0c, 0x24 },
+ { 0x0c, 0x24 },
+ { 0x0d, 0x24 },
+ { 0x11, 0x01 },
+ { 0x12, 0x24 },
+ { 0x13, 0x01 },
+ { 0x14, 0x84 },
+ { 0x15, 0x01 },
+ { 0x16, 0x03 },
+ { 0x17, 0x2f },
+ { 0x18, 0xcf },
+ { 0x19, 0x06 },
+ { 0x1a, 0xf5 },
+ { 0x1b, 0x00 },
+ { 0x20, 0x18 },
+ { 0x21, 0x80 },
+ { 0x22, 0x80 },
+ { 0x23, 0x00 },
+ { 0x26, 0xa2 },
+ { 0x27, 0xea },
+ { 0x28, 0x20 },
+ { 0x29, 0x00 },
+ { 0x2a, 0x10 },
+ { 0x2b, 0x00 },
+ { 0x2c, 0x88 },
+ { 0x2d, 0x91 },
+ { 0x2e, 0x80 },
+ { 0x2f, 0x44 },
+ { 0x60, 0x27 },
+ { 0x61, 0x02 },
+ { 0x62, 0x5f },
+ { 0x63, 0xd5 },
+ { 0x64, 0x57 },
+ { 0x65, 0x83 },
+ { 0x66, 0x55 },
+ { 0x67, 0x92 },
+ { 0x68, 0xcf },
+ { 0x69, 0x76 },
+ { 0x6a, 0x22 },
+ { 0x6b, 0x00 },
+ { 0x6c, 0x02 },
+ { 0x6d, 0x44 },
+ { 0x6e, 0x80 },
+ { 0x6f, 0x1d },
+ { 0x70, 0x8b },
+ { 0x71, 0x00 },
+ { 0x72, 0x14 },
+ { 0x73, 0x54 },
+ { 0x74, 0x00 },
+ { 0x75, 0x8e },
+ { 0x76, 0x00 },
+ { 0x77, 0xff },
+ { 0x78, 0x80 },
+ { 0x79, 0x80 },
+ { 0x7a, 0x80 },
+ { 0x7b, 0xe2 },
+ { 0x7c, 0x00 },
+};
+
+/* 7640 and 7648. The defaults should be OK for most registers. */
+static const struct ov_i2c_regvals norm_7640[] = {
+ { 0x12, 0x80 },
+ { 0x12, 0x14 },
+};
+
+/* 7670. Defaults taken from OmniVision provided data,
+* as provided by Jonathan Corbet of OLPC */
+static const struct ov_i2c_regvals norm_7670[] = {
+ { OV7670_REG_COM7, OV7670_COM7_RESET },
+ { OV7670_REG_TSLB, 0x04 }, /* OV */
+ { OV7670_REG_COM7, OV7670_COM7_FMT_VGA }, /* VGA */
+ { OV7670_REG_CLKRC, 0x01 },
+/*
+ * Set the hardware window. These values from OV don't entirely
+ * make sense - hstop is less than hstart. But they work...
+ */
+ { OV7670_REG_HSTART, 0x13 },
+ { OV7670_REG_HSTOP, 0x01 },
+ { OV7670_REG_HREF, 0xb6 },
+ { OV7670_REG_VSTART, 0x02 },
+ { OV7670_REG_VSTOP, 0x7a },
+ { OV7670_REG_VREF, 0x0a },
+
+ { OV7670_REG_COM3, 0 },
+ { OV7670_REG_COM14, 0 },
+/* Mystery scaling numbers */
+ { 0x70, 0x3a },
+ { 0x71, 0x35 },
+ { 0x72, 0x11 },
+ { 0x73, 0xf0 },
+ { 0xa2, 0x02 },
+/* { OV7670_REG_COM10, 0x0 }, */
+
+/* Gamma curve values */
+ { 0x7a, 0x20 },
+ { 0x7b, 0x10 },
+ { 0x7c, 0x1e },
+ { 0x7d, 0x35 },
+ { 0x7e, 0x5a },
+ { 0x7f, 0x69 },
+ { 0x80, 0x76 },
+ { 0x81, 0x80 },
+ { 0x82, 0x88 },
+ { 0x83, 0x8f },
+ { 0x84, 0x96 },
+ { 0x85, 0xa3 },
+ { 0x86, 0xaf },
+ { 0x87, 0xc4 },
+ { 0x88, 0xd7 },
+ { 0x89, 0xe8 },
+
+/* AGC and AEC parameters. Note we start by disabling those features,
+ then turn them only after tweaking the values. */
+ { OV7670_REG_COM8, OV7670_COM8_FASTAEC
+ | OV7670_COM8_AECSTEP
+ | OV7670_COM8_BFILT },
+ { OV7670_REG_GAIN, 0 },
+ { OV7670_REG_AECH, 0 },
+ { OV7670_REG_COM4, 0x40 }, /* magic reserved bit */
+ { OV7670_REG_COM9, 0x18 }, /* 4x gain + magic rsvd bit */
+ { OV7670_REG_BD50MAX, 0x05 },
+ { OV7670_REG_BD60MAX, 0x07 },
+ { OV7670_REG_AEW, 0x95 },
+ { OV7670_REG_AEB, 0x33 },
+ { OV7670_REG_VPT, 0xe3 },
+ { OV7670_REG_HAECC1, 0x78 },
+ { OV7670_REG_HAECC2, 0x68 },
+ { 0xa1, 0x03 }, /* magic */
+ { OV7670_REG_HAECC3, 0xd8 },
+ { OV7670_REG_HAECC4, 0xd8 },
+ { OV7670_REG_HAECC5, 0xf0 },
+ { OV7670_REG_HAECC6, 0x90 },
+ { OV7670_REG_HAECC7, 0x94 },
+ { OV7670_REG_COM8, OV7670_COM8_FASTAEC
+ | OV7670_COM8_AECSTEP
+ | OV7670_COM8_BFILT
+ | OV7670_COM8_AGC
+ | OV7670_COM8_AEC },
+
+/* Almost all of these are magic "reserved" values. */
+ { OV7670_REG_COM5, 0x61 },
+ { OV7670_REG_COM6, 0x4b },
+ { 0x16, 0x02 },
+ { OV7670_REG_MVFP, 0x07 },
+ { 0x21, 0x02 },
+ { 0x22, 0x91 },
+ { 0x29, 0x07 },
+ { 0x33, 0x0b },
+ { 0x35, 0x0b },
+ { 0x37, 0x1d },
+ { 0x38, 0x71 },
+ { 0x39, 0x2a },
+ { OV7670_REG_COM12, 0x78 },
+ { 0x4d, 0x40 },
+ { 0x4e, 0x20 },
+ { OV7670_REG_GFIX, 0 },
+ { 0x6b, 0x4a },
+ { 0x74, 0x10 },
+ { 0x8d, 0x4f },
+ { 0x8e, 0 },
+ { 0x8f, 0 },
+ { 0x90, 0 },
+ { 0x91, 0 },
+ { 0x96, 0 },
+ { 0x9a, 0 },
+ { 0xb0, 0x84 },
+ { 0xb1, 0x0c },
+ { 0xb2, 0x0e },
+ { 0xb3, 0x82 },
+ { 0xb8, 0x0a },
+
+/* More reserved magic, some of which tweaks white balance */
+ { 0x43, 0x0a },
+ { 0x44, 0xf0 },
+ { 0x45, 0x34 },
+ { 0x46, 0x58 },
+ { 0x47, 0x28 },
+ { 0x48, 0x3a },
+ { 0x59, 0x88 },
+ { 0x5a, 0x88 },
+ { 0x5b, 0x44 },
+ { 0x5c, 0x67 },
+ { 0x5d, 0x49 },
+ { 0x5e, 0x0e },
+ { 0x6c, 0x0a },
+ { 0x6d, 0x55 },
+ { 0x6e, 0x11 },
+ { 0x6f, 0x9f },
+ /* "9e for advance AWB" */
+ { 0x6a, 0x40 },
+ { OV7670_REG_BLUE, 0x40 },
+ { OV7670_REG_RED, 0x60 },
+ { OV7670_REG_COM8, OV7670_COM8_FASTAEC
+ | OV7670_COM8_AECSTEP
+ | OV7670_COM8_BFILT
+ | OV7670_COM8_AGC
+ | OV7670_COM8_AEC
+ | OV7670_COM8_AWB },
+
+/* Matrix coefficients */
+ { 0x4f, 0x80 },
+ { 0x50, 0x80 },
+ { 0x51, 0 },
+ { 0x52, 0x22 },
+ { 0x53, 0x5e },
+ { 0x54, 0x80 },
+ { 0x58, 0x9e },
+
+ { OV7670_REG_COM16, OV7670_COM16_AWBGAIN },
+ { OV7670_REG_EDGE, 0 },
+ { 0x75, 0x05 },
+ { 0x76, 0xe1 },
+ { 0x4c, 0 },
+ { 0x77, 0x01 },
+ { OV7670_REG_COM13, OV7670_COM13_GAMMA
+ | OV7670_COM13_UVSAT
+ | 2}, /* was 3 */
+ { 0x4b, 0x09 },
+ { 0xc9, 0x60 },
+ { OV7670_REG_COM16, 0x38 },
+ { 0x56, 0x40 },
+
+ { 0x34, 0x11 },
+ { OV7670_REG_COM11, OV7670_COM11_EXP|OV7670_COM11_HZAUTO },
+ { 0xa4, 0x88 },
+ { 0x96, 0 },
+ { 0x97, 0x30 },
+ { 0x98, 0x20 },
+ { 0x99, 0x30 },
+ { 0x9a, 0x84 },
+ { 0x9b, 0x29 },
+ { 0x9c, 0x03 },
+ { 0x9d, 0x4c },
+ { 0x9e, 0x3f },
+ { 0x78, 0x04 },
+
+/* Extra-weird stuff. Some sort of multiplexor register */
+ { 0x79, 0x01 },
+ { 0xc8, 0xf0 },
+ { 0x79, 0x0f },
+ { 0xc8, 0x00 },
+ { 0x79, 0x10 },
+ { 0xc8, 0x7e },
+ { 0x79, 0x0a },
+ { 0xc8, 0x80 },
+ { 0x79, 0x0b },
+ { 0xc8, 0x01 },
+ { 0x79, 0x0c },
+ { 0xc8, 0x0f },
+ { 0x79, 0x0d },
+ { 0xc8, 0x20 },
+ { 0x79, 0x09 },
+ { 0xc8, 0x80 },
+ { 0x79, 0x02 },
+ { 0xc8, 0xc0 },
+ { 0x79, 0x03 },
+ { 0xc8, 0x40 },
+ { 0x79, 0x05 },
+ { 0xc8, 0x30 },
+ { 0x79, 0x26 },
+};
+
+static const struct ov_i2c_regvals norm_8610[] = {
+ { 0x12, 0x80 },
+ { 0x00, 0x00 },
+ { 0x01, 0x80 },
+ { 0x02, 0x80 },
+ { 0x03, 0xc0 },
+ { 0x04, 0x30 },
+ { 0x05, 0x30 }, /* was 0x10, new from windrv 090403 */
+ { 0x06, 0x70 }, /* was 0x80, new from windrv 090403 */
+ { 0x0a, 0x86 },
+ { 0x0b, 0xb0 },
+ { 0x0c, 0x20 },
+ { 0x0d, 0x20 },
+ { 0x11, 0x01 },
+ { 0x12, 0x25 },
+ { 0x13, 0x01 },
+ { 0x14, 0x04 },
+ { 0x15, 0x01 }, /* Lin and Win think different about UV order */
+ { 0x16, 0x03 },
+ { 0x17, 0x38 }, /* was 0x2f, new from windrv 090403 */
+ { 0x18, 0xea }, /* was 0xcf, new from windrv 090403 */
+ { 0x19, 0x02 }, /* was 0x06, new from windrv 090403 */
+ { 0x1a, 0xf5 },
+ { 0x1b, 0x00 },
+ { 0x20, 0xd0 }, /* was 0x90, new from windrv 090403 */
+ { 0x23, 0xc0 }, /* was 0x00, new from windrv 090403 */
+ { 0x24, 0x30 }, /* was 0x1d, new from windrv 090403 */
+ { 0x25, 0x50 }, /* was 0x57, new from windrv 090403 */
+ { 0x26, 0xa2 },
+ { 0x27, 0xea },
+ { 0x28, 0x00 },
+ { 0x29, 0x00 },
+ { 0x2a, 0x80 },
+ { 0x2b, 0xc8 }, /* was 0xcc, new from windrv 090403 */
+ { 0x2c, 0xac },
+ { 0x2d, 0x45 }, /* was 0xd5, new from windrv 090403 */
+ { 0x2e, 0x80 },
+ { 0x2f, 0x14 }, /* was 0x01, new from windrv 090403 */
+ { 0x4c, 0x00 },
+ { 0x4d, 0x30 }, /* was 0x10, new from windrv 090403 */
+ { 0x60, 0x02 }, /* was 0x01, new from windrv 090403 */
+ { 0x61, 0x00 }, /* was 0x09, new from windrv 090403 */
+ { 0x62, 0x5f }, /* was 0xd7, new from windrv 090403 */
+ { 0x63, 0xff },
+ { 0x64, 0x53 }, /* new windrv 090403 says 0x57,
+ * maybe thats wrong */
+ { 0x65, 0x00 },
+ { 0x66, 0x55 },
+ { 0x67, 0xb0 },
+ { 0x68, 0xc0 }, /* was 0xaf, new from windrv 090403 */
+ { 0x69, 0x02 },
+ { 0x6a, 0x22 },
+ { 0x6b, 0x00 },
+ { 0x6c, 0x99 }, /* was 0x80, old windrv says 0x00, but
+ * deleting bit7 colors the first images red */
+ { 0x6d, 0x11 }, /* was 0x00, new from windrv 090403 */
+ { 0x6e, 0x11 }, /* was 0x00, new from windrv 090403 */
+ { 0x6f, 0x01 },
+ { 0x70, 0x8b },
+ { 0x71, 0x00 },
+ { 0x72, 0x14 },
+ { 0x73, 0x54 },
+ { 0x74, 0x00 },/* 0x60? - was 0x00, new from windrv 090403 */
+ { 0x75, 0x0e },
+ { 0x76, 0x02 }, /* was 0x02, new from windrv 090403 */
+ { 0x77, 0xff },
+ { 0x78, 0x80 },
+ { 0x79, 0x80 },
+ { 0x7a, 0x80 },
+ { 0x7b, 0x10 }, /* was 0x13, new from windrv 090403 */
+ { 0x7c, 0x00 },
+ { 0x7d, 0x08 }, /* was 0x09, new from windrv 090403 */
+ { 0x7e, 0x08 }, /* was 0xc0, new from windrv 090403 */
+ { 0x7f, 0xfb },
+ { 0x80, 0x28 },
+ { 0x81, 0x00 },
+ { 0x82, 0x23 },
+ { 0x83, 0x0b },
+ { 0x84, 0x00 },
+ { 0x85, 0x62 }, /* was 0x61, new from windrv 090403 */
+ { 0x86, 0xc9 },
+ { 0x87, 0x00 },
+ { 0x88, 0x00 },
+ { 0x89, 0x01 },
+ { 0x12, 0x20 },
+ { 0x12, 0x25 }, /* was 0x24, new from windrv 090403 */
+};
+
static unsigned char ov7670_abs_to_sm(unsigned char v)
{
if (v > 127)
rc = reg_w(sd, R51x_I2C_W_SID, slave);
if (rc < 0)
return rc;
+ sd->primary_i2c_slave = slave;
return reg_w(sd, R51x_I2C_R_SID, slave + 1);
}
-struct ov_regvals {
- __u8 reg;
- __u8 val;
-};
-struct ov_i2c_regvals {
- __u8 reg;
- __u8 val;
-};
-
static int write_regvals(struct sd *sd,
const struct ov_regvals *regvals,
int n)
static int ov8xx0_configure(struct sd *sd)
{
int rc;
- static const struct ov_i2c_regvals norm_8610[] = {
- { 0x12, 0x80 },
- { 0x00, 0x00 },
- { 0x01, 0x80 },
- { 0x02, 0x80 },
- { 0x03, 0xc0 },
- { 0x04, 0x30 },
- { 0x05, 0x30 }, /* was 0x10, new from windrv 090403 */
- { 0x06, 0x70 }, /* was 0x80, new from windrv 090403 */
- { 0x0a, 0x86 },
- { 0x0b, 0xb0 },
- { 0x0c, 0x20 },
- { 0x0d, 0x20 },
- { 0x11, 0x01 },
- { 0x12, 0x25 },
- { 0x13, 0x01 },
- { 0x14, 0x04 },
- { 0x15, 0x01 }, /* Lin and Win think different about UV order */
- { 0x16, 0x03 },
- { 0x17, 0x38 }, /* was 0x2f, new from windrv 090403 */
- { 0x18, 0xea }, /* was 0xcf, new from windrv 090403 */
- { 0x19, 0x02 }, /* was 0x06, new from windrv 090403 */
- { 0x1a, 0xf5 },
- { 0x1b, 0x00 },
- { 0x20, 0xd0 }, /* was 0x90, new from windrv 090403 */
- { 0x23, 0xc0 }, /* was 0x00, new from windrv 090403 */
- { 0x24, 0x30 }, /* was 0x1d, new from windrv 090403 */
- { 0x25, 0x50 }, /* was 0x57, new from windrv 090403 */
- { 0x26, 0xa2 },
- { 0x27, 0xea },
- { 0x28, 0x00 },
- { 0x29, 0x00 },
- { 0x2a, 0x80 },
- { 0x2b, 0xc8 }, /* was 0xcc, new from windrv 090403 */
- { 0x2c, 0xac },
- { 0x2d, 0x45 }, /* was 0xd5, new from windrv 090403 */
- { 0x2e, 0x80 },
- { 0x2f, 0x14 }, /* was 0x01, new from windrv 090403 */
- { 0x4c, 0x00 },
- { 0x4d, 0x30 }, /* was 0x10, new from windrv 090403 */
- { 0x60, 0x02 }, /* was 0x01, new from windrv 090403 */
- { 0x61, 0x00 }, /* was 0x09, new from windrv 090403 */
- { 0x62, 0x5f }, /* was 0xd7, new from windrv 090403 */
- { 0x63, 0xff },
- { 0x64, 0x53 }, /* new windrv 090403 says 0x57,
- * maybe thats wrong */
- { 0x65, 0x00 },
- { 0x66, 0x55 },
- { 0x67, 0xb0 },
- { 0x68, 0xc0 }, /* was 0xaf, new from windrv 090403 */
- { 0x69, 0x02 },
- { 0x6a, 0x22 },
- { 0x6b, 0x00 },
- { 0x6c, 0x99 }, /* was 0x80, old windrv says 0x00, but
- deleting bit7 colors the first images red */
- { 0x6d, 0x11 }, /* was 0x00, new from windrv 090403 */
- { 0x6e, 0x11 }, /* was 0x00, new from windrv 090403 */
- { 0x6f, 0x01 },
- { 0x70, 0x8b },
- { 0x71, 0x00 },
- { 0x72, 0x14 },
- { 0x73, 0x54 },
- { 0x74, 0x00 },/* 0x60? - was 0x00, new from windrv 090403 */
- { 0x75, 0x0e },
- { 0x76, 0x02 }, /* was 0x02, new from windrv 090403 */
- { 0x77, 0xff },
- { 0x78, 0x80 },
- { 0x79, 0x80 },
- { 0x7a, 0x80 },
- { 0x7b, 0x10 }, /* was 0x13, new from windrv 090403 */
- { 0x7c, 0x00 },
- { 0x7d, 0x08 }, /* was 0x09, new from windrv 090403 */
- { 0x7e, 0x08 }, /* was 0xc0, new from windrv 090403 */
- { 0x7f, 0xfb },
- { 0x80, 0x28 },
- { 0x81, 0x00 },
- { 0x82, 0x23 },
- { 0x83, 0x0b },
- { 0x84, 0x00 },
- { 0x85, 0x62 }, /* was 0x61, new from windrv 090403 */
- { 0x86, 0xc9 },
- { 0x87, 0x00 },
- { 0x88, 0x00 },
- { 0x89, 0x01 },
- { 0x12, 0x20 },
- { 0x12, 0x25 }, /* was 0x24, new from windrv 090403 */
- };
PDEBUG(D_PROBE, "starting ov8xx0 configuration");
- if (init_ov_sensor(sd) < 0)
- PDEBUG(D_ERR|D_PROBE, "Failed to read sensor ID");
- else
- PDEBUG(D_PROBE, "OV86x0 initialized");
-
/* Detect sensor (sub)type */
rc = i2c_r(sd, OV7610_REG_COM_I);
if (rc < 0) {
PDEBUG(D_ERR, "Unknown image sensor version: %d", rc & 3);
return -1;
}
- PDEBUG(D_PROBE, "Writing 8610 registers");
- if (write_i2c_regvals(sd, norm_8610, ARRAY_SIZE(norm_8610)))
- return -1;
/* Set sensor-specific vars */
/* sd->sif = 0; already done */
{
int rc, high, low;
- /* Lawrence Glaister <lg@jfm.bc.ca> reports:
- *
- * Register 0x0f in the 7610 has the following effects:
- *
- * 0x85 (AEC method 1): Best overall, good contrast range
- * 0x45 (AEC method 2): Very overexposed
- * 0xa5 (spec sheet default): Ok, but the black level is
- * shifted resulting in loss of contrast
- * 0x05 (old driver setting): very overexposed, too much
- * contrast
- */
- static const struct ov_i2c_regvals norm_7610[] = {
- { 0x10, 0xff },
- { 0x16, 0x06 },
- { 0x28, 0x24 },
- { 0x2b, 0xac },
- { 0x12, 0x00 },
- { 0x38, 0x81 },
- { 0x28, 0x24 }, /* 0c */
- { 0x0f, 0x85 }, /* lg's setting */
- { 0x15, 0x01 },
- { 0x20, 0x1c },
- { 0x23, 0x2a },
- { 0x24, 0x10 },
- { 0x25, 0x8a },
- { 0x26, 0xa2 },
- { 0x27, 0xc2 },
- { 0x2a, 0x04 },
- { 0x2c, 0xfe },
- { 0x2d, 0x93 },
- { 0x30, 0x71 },
- { 0x31, 0x60 },
- { 0x32, 0x26 },
- { 0x33, 0x20 },
- { 0x34, 0x48 },
- { 0x12, 0x24 },
- { 0x11, 0x01 },
- { 0x0c, 0x24 },
- { 0x0d, 0x24 },
- };
-
- static const struct ov_i2c_regvals norm_7620[] = {
- { 0x00, 0x00 }, /* gain */
- { 0x01, 0x80 }, /* blue gain */
- { 0x02, 0x80 }, /* red gain */
- { 0x03, 0xc0 }, /* OV7670_REG_VREF */
- { 0x06, 0x60 },
- { 0x07, 0x00 },
- { 0x0c, 0x24 },
- { 0x0c, 0x24 },
- { 0x0d, 0x24 },
- { 0x11, 0x01 },
- { 0x12, 0x24 },
- { 0x13, 0x01 },
- { 0x14, 0x84 },
- { 0x15, 0x01 },
- { 0x16, 0x03 },
- { 0x17, 0x2f },
- { 0x18, 0xcf },
- { 0x19, 0x06 },
- { 0x1a, 0xf5 },
- { 0x1b, 0x00 },
- { 0x20, 0x18 },
- { 0x21, 0x80 },
- { 0x22, 0x80 },
- { 0x23, 0x00 },
- { 0x26, 0xa2 },
- { 0x27, 0xea },
- { 0x28, 0x20 },
- { 0x29, 0x00 },
- { 0x2a, 0x10 },
- { 0x2b, 0x00 },
- { 0x2c, 0x88 },
- { 0x2d, 0x91 },
- { 0x2e, 0x80 },
- { 0x2f, 0x44 },
- { 0x60, 0x27 },
- { 0x61, 0x02 },
- { 0x62, 0x5f },
- { 0x63, 0xd5 },
- { 0x64, 0x57 },
- { 0x65, 0x83 },
- { 0x66, 0x55 },
- { 0x67, 0x92 },
- { 0x68, 0xcf },
- { 0x69, 0x76 },
- { 0x6a, 0x22 },
- { 0x6b, 0x00 },
- { 0x6c, 0x02 },
- { 0x6d, 0x44 },
- { 0x6e, 0x80 },
- { 0x6f, 0x1d },
- { 0x70, 0x8b },
- { 0x71, 0x00 },
- { 0x72, 0x14 },
- { 0x73, 0x54 },
- { 0x74, 0x00 },
- { 0x75, 0x8e },
- { 0x76, 0x00 },
- { 0x77, 0xff },
- { 0x78, 0x80 },
- { 0x79, 0x80 },
- { 0x7a, 0x80 },
- { 0x7b, 0xe2 },
- { 0x7c, 0x00 },
- };
-
- /* 7640 and 7648. The defaults should be OK for most registers. */
- static const struct ov_i2c_regvals norm_7640[] = {
- { 0x12, 0x80 },
- { 0x12, 0x14 },
- };
-
- /* 7670. Defaults taken from OmniVision provided data,
- * as provided by Jonathan Corbet of OLPC */
- static const struct ov_i2c_regvals norm_7670[] = {
- { OV7670_REG_COM7, OV7670_COM7_RESET },
- { OV7670_REG_TSLB, 0x04 }, /* OV */
- { OV7670_REG_COM7, OV7670_COM7_FMT_VGA }, /* VGA */
- { OV7670_REG_CLKRC, 0x01 },
- /*
- * Set the hardware window. These values from OV don't entirely
- * make sense - hstop is less than hstart. But they work...
- */
- { OV7670_REG_HSTART, 0x13 }, { OV7670_REG_HSTOP, 0x01 },
- { OV7670_REG_HREF, 0xb6 }, { OV7670_REG_VSTART, 0x02 },
- { OV7670_REG_VSTOP, 0x7a }, { OV7670_REG_VREF, 0x0a },
-
- { OV7670_REG_COM3, 0 }, { OV7670_REG_COM14, 0 },
- /* Mystery scaling numbers */
- { 0x70, 0x3a }, { 0x71, 0x35 },
- { 0x72, 0x11 }, { 0x73, 0xf0 },
- { 0xa2, 0x02 },
-/* { OV7670_REG_COM10, 0x0 }, */
-
- /* Gamma curve values */
- { 0x7a, 0x20 },
- { 0x7b, 0x10 },
- { 0x7c, 0x1e },
- { 0x7d, 0x35 },
- { 0x7e, 0x5a }, { 0x7f, 0x69 },
- { 0x80, 0x76 }, { 0x81, 0x80 },
- { 0x82, 0x88 }, { 0x83, 0x8f },
- { 0x84, 0x96 }, { 0x85, 0xa3 },
- { 0x86, 0xaf }, { 0x87, 0xc4 },
- { 0x88, 0xd7 }, { 0x89, 0xe8 },
-
- /* AGC and AEC parameters. Note we start by disabling those features,
- then turn them only after tweaking the values. */
- { OV7670_REG_COM8, OV7670_COM8_FASTAEC
- | OV7670_COM8_AECSTEP
- | OV7670_COM8_BFILT },
- { OV7670_REG_GAIN, 0 }, { OV7670_REG_AECH, 0 },
- { OV7670_REG_COM4, 0x40 }, /* magic reserved bit */
- { OV7670_REG_COM9, 0x18 }, /* 4x gain + magic rsvd bit */
- { OV7670_REG_BD50MAX, 0x05 }, { OV7670_REG_BD60MAX, 0x07 },
- { OV7670_REG_AEW, 0x95 }, { OV7670_REG_AEB, 0x33 },
- { OV7670_REG_VPT, 0xe3 }, { OV7670_REG_HAECC1, 0x78 },
- { OV7670_REG_HAECC2, 0x68 },
- { 0xa1, 0x03 }, /* magic */
- { OV7670_REG_HAECC3, 0xd8 }, { OV7670_REG_HAECC4, 0xd8 },
- { OV7670_REG_HAECC5, 0xf0 }, { OV7670_REG_HAECC6, 0x90 },
- { OV7670_REG_HAECC7, 0x94 },
- { OV7670_REG_COM8, OV7670_COM8_FASTAEC
- | OV7670_COM8_AECSTEP
- | OV7670_COM8_BFILT
- | OV7670_COM8_AGC
- | OV7670_COM8_AEC },
-
- /* Almost all of these are magic "reserved" values. */
- { OV7670_REG_COM5, 0x61 }, { OV7670_REG_COM6, 0x4b },
- { 0x16, 0x02 },
- { OV7670_REG_MVFP, 0x07 },
- { 0x21, 0x02 }, { 0x22, 0x91 },
- { 0x29, 0x07 }, { 0x33, 0x0b },
- { 0x35, 0x0b }, { 0x37, 0x1d },
- { 0x38, 0x71 }, { 0x39, 0x2a },
- { OV7670_REG_COM12, 0x78 }, { 0x4d, 0x40 },
- { 0x4e, 0x20 }, { OV7670_REG_GFIX, 0 },
- { 0x6b, 0x4a }, { 0x74, 0x10 },
- { 0x8d, 0x4f }, { 0x8e, 0 },
- { 0x8f, 0 }, { 0x90, 0 },
- { 0x91, 0 }, { 0x96, 0 },
- { 0x9a, 0 }, { 0xb0, 0x84 },
- { 0xb1, 0x0c }, { 0xb2, 0x0e },
- { 0xb3, 0x82 }, { 0xb8, 0x0a },
-
- /* More reserved magic, some of which tweaks white balance */
- { 0x43, 0x0a }, { 0x44, 0xf0 },
- { 0x45, 0x34 }, { 0x46, 0x58 },
- { 0x47, 0x28 }, { 0x48, 0x3a },
- { 0x59, 0x88 }, { 0x5a, 0x88 },
- { 0x5b, 0x44 }, { 0x5c, 0x67 },
- { 0x5d, 0x49 }, { 0x5e, 0x0e },
- { 0x6c, 0x0a }, { 0x6d, 0x55 },
- { 0x6e, 0x11 }, { 0x6f, 0x9f },
- /* "9e for advance AWB" */
- { 0x6a, 0x40 }, { OV7670_REG_BLUE, 0x40 },
- { OV7670_REG_RED, 0x60 },
- { OV7670_REG_COM8, OV7670_COM8_FASTAEC
- | OV7670_COM8_AECSTEP
- | OV7670_COM8_BFILT
- | OV7670_COM8_AGC
- | OV7670_COM8_AEC
- | OV7670_COM8_AWB },
-
- /* Matrix coefficients */
- { 0x4f, 0x80 }, { 0x50, 0x80 },
- { 0x51, 0 }, { 0x52, 0x22 },
- { 0x53, 0x5e }, { 0x54, 0x80 },
- { 0x58, 0x9e },
-
- { OV7670_REG_COM16, OV7670_COM16_AWBGAIN },
- { OV7670_REG_EDGE, 0 },
- { 0x75, 0x05 }, { 0x76, 0xe1 },
- { 0x4c, 0 }, { 0x77, 0x01 },
- { OV7670_REG_COM13, OV7670_COM13_GAMMA
- | OV7670_COM13_UVSAT
- | 2}, /* was 3 */
- { 0x4b, 0x09 },
- { 0xc9, 0x60 }, { OV7670_REG_COM16, 0x38 },
- { 0x56, 0x40 },
-
- { 0x34, 0x11 },
- { OV7670_REG_COM11, OV7670_COM11_EXP|OV7670_COM11_HZAUTO },
- { 0xa4, 0x88 }, { 0x96, 0 },
- { 0x97, 0x30 }, { 0x98, 0x20 },
- { 0x99, 0x30 }, { 0x9a, 0x84 },
- { 0x9b, 0x29 }, { 0x9c, 0x03 },
- { 0x9d, 0x4c }, { 0x9e, 0x3f },
- { 0x78, 0x04 },
-
- /* Extra-weird stuff. Some sort of multiplexor register */
- { 0x79, 0x01 }, { 0xc8, 0xf0 },
- { 0x79, 0x0f }, { 0xc8, 0x00 },
- { 0x79, 0x10 }, { 0xc8, 0x7e },
- { 0x79, 0x0a }, { 0xc8, 0x80 },
- { 0x79, 0x0b }, { 0xc8, 0x01 },
- { 0x79, 0x0c }, { 0xc8, 0x0f },
- { 0x79, 0x0d }, { 0xc8, 0x20 },
- { 0x79, 0x09 }, { 0xc8, 0x80 },
- { 0x79, 0x02 }, { 0xc8, 0xc0 },
- { 0x79, 0x03 }, { 0xc8, 0x40 },
- { 0x79, 0x05 }, { 0xc8, 0x30 },
- { 0x79, 0x26 },
- };
PDEBUG(D_PROBE, "starting OV7xx0 configuration");
switch (low) {
case 0x30:
PDEBUG(D_PROBE, "Sensor is an OV7630/OV7635");
- sd->sensor = SEN_OV7630;
- break;
+ PDEBUG(D_ERR,
+ "7630 is not supported by this driver");
+ return -1;
case 0x40:
PDEBUG(D_PROBE, "Sensor is an OV7645");
sd->sensor = SEN_OV7640; /* FIXME */
return -1;
}
- switch (sd->sensor) {
- case SEN_OV7620:
- PDEBUG(D_PROBE, "Writing 7620 registers");
- if (write_i2c_regvals(sd, norm_7620, ARRAY_SIZE(norm_7620)))
- return -1;
- break;
- case SEN_OV7630:
- PDEBUG(D_ERR, "7630 is not supported by this driver version");
- return -1;
- case SEN_OV7640:
- PDEBUG(D_PROBE, "Writing 7640 registers");
- if (write_i2c_regvals(sd, norm_7640, ARRAY_SIZE(norm_7640)))
- return -1;
- break;
- case SEN_OV7670:
- PDEBUG(D_PROBE, "Writing 7670 registers");
- if (write_i2c_regvals(sd, norm_7670, ARRAY_SIZE(norm_7670)))
- return -1;
- break;
- default:
- PDEBUG(D_PROBE, "Writing 7610 registers");
- if (write_i2c_regvals(sd, norm_7610, ARRAY_SIZE(norm_7610)))
- return -1;
- break;
- }
-
/* Set sensor-specific vars */
/* sd->sif = 0; already done */
return 0;
static int ov6xx0_configure(struct sd *sd)
{
int rc;
- static const struct ov_i2c_regvals norm_6x20[] = {
- { 0x12, 0x80 }, /* reset */
- { 0x11, 0x01 },
- { 0x03, 0x60 },
- { 0x05, 0x7f }, /* For when autoadjust is off */
- { 0x07, 0xa8 },
- /* The ratio of 0x0c and 0x0d controls the white point */
- { 0x0c, 0x24 },
- { 0x0d, 0x24 },
- { 0x0f, 0x15 }, /* COMS */
- { 0x10, 0x75 }, /* AEC Exposure time */
- { 0x12, 0x24 }, /* Enable AGC */
- { 0x14, 0x04 },
- /* 0x16: 0x06 helps frame stability with moving objects */
- { 0x16, 0x06 },
-/* { 0x20, 0x30 }, * Aperture correction enable */
- { 0x26, 0xb2 }, /* BLC enable */
- /* 0x28: 0x05 Selects RGB format if RGB on */
- { 0x28, 0x05 },
- { 0x2a, 0x04 }, /* Disable framerate adjust */
-/* { 0x2b, 0xac }, * Framerate; Set 2a[7] first */
- { 0x2d, 0x99 },
- { 0x33, 0xa0 }, /* Color Processing Parameter */
- { 0x34, 0xd2 }, /* Max A/D range */
- { 0x38, 0x8b },
- { 0x39, 0x40 },
-
- { 0x3c, 0x39 }, /* Enable AEC mode changing */
- { 0x3c, 0x3c }, /* Change AEC mode */
- { 0x3c, 0x24 }, /* Disable AEC mode changing */
-
- { 0x3d, 0x80 },
- /* These next two registers (0x4a, 0x4b) are undocumented.
- * They control the color balance */
- { 0x4a, 0x80 },
- { 0x4b, 0x80 },
- { 0x4d, 0xd2 }, /* This reduces noise a bit */
- { 0x4e, 0xc1 },
- { 0x4f, 0x04 },
-/* Do 50-53 have any effect? */
-/* Toggle 0x12[2] off and on here? */
- };
-
- static const struct ov_i2c_regvals norm_6x30[] = {
- { 0x12, 0x80 }, /* Reset */
- { 0x00, 0x1f }, /* Gain */
- { 0x01, 0x99 }, /* Blue gain */
- { 0x02, 0x7c }, /* Red gain */
- { 0x03, 0xc0 }, /* Saturation */
- { 0x05, 0x0a }, /* Contrast */
- { 0x06, 0x95 }, /* Brightness */
- { 0x07, 0x2d }, /* Sharpness */
- { 0x0c, 0x20 },
- { 0x0d, 0x20 },
- { 0x0e, 0x20 },
- { 0x0f, 0x05 },
- { 0x10, 0x9a },
- { 0x11, 0x00 }, /* Pixel clock = fastest */
- { 0x12, 0x24 }, /* Enable AGC and AWB */
- { 0x13, 0x21 },
- { 0x14, 0x80 },
- { 0x15, 0x01 },
- { 0x16, 0x03 },
- { 0x17, 0x38 },
- { 0x18, 0xea },
- { 0x19, 0x04 },
- { 0x1a, 0x93 },
- { 0x1b, 0x00 },
- { 0x1e, 0xc4 },
- { 0x1f, 0x04 },
- { 0x20, 0x20 },
- { 0x21, 0x10 },
- { 0x22, 0x88 },
- { 0x23, 0xc0 }, /* Crystal circuit power level */
- { 0x25, 0x9a }, /* Increase AEC black ratio */
- { 0x26, 0xb2 }, /* BLC enable */
- { 0x27, 0xa2 },
- { 0x28, 0x00 },
- { 0x29, 0x00 },
- { 0x2a, 0x84 }, /* 60 Hz power */
- { 0x2b, 0xa8 }, /* 60 Hz power */
- { 0x2c, 0xa0 },
- { 0x2d, 0x95 }, /* Enable auto-brightness */
- { 0x2e, 0x88 },
- { 0x33, 0x26 },
- { 0x34, 0x03 },
- { 0x36, 0x8f },
- { 0x37, 0x80 },
- { 0x38, 0x83 },
- { 0x39, 0x80 },
- { 0x3a, 0x0f },
- { 0x3b, 0x3c },
- { 0x3c, 0x1a },
- { 0x3d, 0x80 },
- { 0x3e, 0x80 },
- { 0x3f, 0x0e },
- { 0x40, 0x00 }, /* White bal */
- { 0x41, 0x00 }, /* White bal */
- { 0x42, 0x80 },
- { 0x43, 0x3f }, /* White bal */
- { 0x44, 0x80 },
- { 0x45, 0x20 },
- { 0x46, 0x20 },
- { 0x47, 0x80 },
- { 0x48, 0x7f },
- { 0x49, 0x00 },
- { 0x4a, 0x00 },
- { 0x4b, 0x80 },
- { 0x4c, 0xd0 },
- { 0x4d, 0x10 }, /* U = 0.563u, V = 0.714v */
- { 0x4e, 0x40 },
- { 0x4f, 0x07 }, /* UV avg., col. killer: max */
- { 0x50, 0xff },
- { 0x54, 0x23 }, /* Max AGC gain: 18dB */
- { 0x55, 0xff },
- { 0x56, 0x12 },
- { 0x57, 0x81 },
- { 0x58, 0x75 },
- { 0x59, 0x01 }, /* AGC dark current comp.: +1 */
- { 0x5a, 0x2c },
- { 0x5b, 0x0f }, /* AWB chrominance levels */
- { 0x5c, 0x10 },
- { 0x3d, 0x80 },
- { 0x27, 0xa6 },
- { 0x12, 0x20 }, /* Toggle AWB */
- { 0x12, 0x24 },
- };
-
- PDEBUG(D_PROBE, "starting sensor configuration");
-
- if (init_ov_sensor(sd) < 0) {
- PDEBUG(D_ERR, "Failed to read sensor ID.");
- return -1;
- }
- PDEBUG(D_PROBE, "OV6xx0 sensor detected");
+ PDEBUG(D_PROBE, "starting OV6xx0 configuration");
/* Detect sensor (sub)type */
rc = i2c_r(sd, OV7610_REG_COM_I);
/* Set sensor-specific vars */
sd->sif = 1;
- if (sd->sensor == SEN_OV6620) {
- PDEBUG(D_PROBE, "Writing 6x20 registers");
- if (write_i2c_regvals(sd, norm_6x20, ARRAY_SIZE(norm_6x20)))
- return -1;
- } else {
- PDEBUG(D_PROBE, "Writing 6x30 registers");
- if (write_i2c_regvals(sd, norm_6x30, ARRAY_SIZE(norm_6x30)))
- return -1;
- }
return 0;
}
ov51x_led_control(sd, 0); /* turn LED off */
/* Test for 76xx */
- sd->primary_i2c_slave = OV7xx0_SID;
if (ov51x_set_slave_ids(sd, OV7xx0_SID) < 0)
goto error;
/* The OV519 must be more aggressive about sensor detection since
* I2C write will never fail if the sensor is not present. We have
* to try to initialize the sensor to detect its presence */
- if (init_ov_sensor(sd) < 0) {
+ if (init_ov_sensor(sd) >= 0) {
+ if (ov7xx0_configure(sd) < 0) {
+ PDEBUG(D_ERR, "Failed to configure OV7xx0");
+ goto error;
+ }
+ } else {
+
/* Test for 6xx0 */
- sd->primary_i2c_slave = OV6xx0_SID;
if (ov51x_set_slave_ids(sd, OV6xx0_SID) < 0)
goto error;
- if (init_ov_sensor(sd) < 0) {
+ if (init_ov_sensor(sd) >= 0) {
+ if (ov6xx0_configure(sd) < 0) {
+ PDEBUG(D_ERR, "Failed to configure OV6xx0");
+ goto error;
+ }
+ } else {
+
/* Test for 8xx0 */
- sd->primary_i2c_slave = OV8xx0_SID;
if (ov51x_set_slave_ids(sd, OV8xx0_SID) < 0)
goto error;
PDEBUG(D_ERR,
"Can't determine sensor slave IDs");
goto error;
- } else {
- if (ov8xx0_configure(sd) < 0) {
- PDEBUG(D_ERR,
- "Failed to configure OV8xx0 sensor");
- goto error;
- }
}
- } else {
- if (ov6xx0_configure(sd) < 0) {
- PDEBUG(D_ERR, "Failed to configure OV6xx0");
+ if (ov8xx0_configure(sd) < 0) {
+ PDEBUG(D_ERR,
+ "Failed to configure OV8xx0 sensor");
goto error;
}
}
- } else {
- if (ov7xx0_configure(sd) < 0) {
- PDEBUG(D_ERR, "Failed to configure OV7xx0");
- goto error;
- }
}
cam = &gspca_dev->cam;
sd->colors = COLOR_DEF;
sd->hflip = HFLIP_DEF;
sd->vflip = VFLIP_DEF;
+ if (sd->sensor != SEN_OV7670)
+ gspca_dev->ctrl_dis = (1 << HFLIP_IDX)
+ | (1 << VFLIP_IDX);
return 0;
error:
PDEBUG(D_ERR, "OV519 Config failed");
return -EBUSY;
}
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ /* initialize the sensor */
+ switch (sd->sensor) {
+ case SEN_OV6620:
+ if (write_i2c_regvals(sd, norm_6x20, ARRAY_SIZE(norm_6x20)))
+ return -EIO;
+ break;
+ case SEN_OV6630:
+ if (write_i2c_regvals(sd, norm_6x30, ARRAY_SIZE(norm_6x30)))
+ return -EIO;
+ break;
+ default:
+/* case SEN_OV7610: */
+/* case SEN_OV76BE: */
+ if (write_i2c_regvals(sd, norm_7610, ARRAY_SIZE(norm_7610)))
+ return -EIO;
+ break;
+ case SEN_OV7620:
+ if (write_i2c_regvals(sd, norm_7620, ARRAY_SIZE(norm_7620)))
+ return -EIO;
+ break;
+ case SEN_OV7640:
+ if (write_i2c_regvals(sd, norm_7640, ARRAY_SIZE(norm_7640)))
+ return -EIO;
+ break;
+ case SEN_OV7670:
+ if (write_i2c_regvals(sd, norm_7670, ARRAY_SIZE(norm_7670)))
+ return -EIO;
+ break;
+ case SEN_OV8610:
+ if (write_i2c_regvals(sd, norm_8610, ARRAY_SIZE(norm_8610)))
+ return -EIO;
+ break;
+ }
return 0;
}
ov51x_led_control((struct sd *) gspca_dev, 0);
}
-static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-}
-
-static void sd_close(struct gspca_dev *gspca_dev)
-{
-}
-
static void sd_pkt_scan(struct gspca_dev *gspca_dev,
struct gspca_frame *frame, /* target */
__u8 *data, /* isoc packet */
.ctrls = sd_ctrls,
.nctrls = ARRAY_SIZE(sd_ctrls),
.config = sd_config,
- .open = sd_open,
+ .init = sd_init,
.start = sd_start,
.stopN = sd_stopN,
- .stop0 = sd_stop0,
- .close = sd_close,
.pkt_scan = sd_pkt_scan,
};
.id_table = device_table,
.probe = sd_probe,
.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+ .suspend = gspca_suspend,
+ .resume = gspca_resume,
+#endif
};
/* -- module insert / remove -- */
#define PAC207_GAIN_KNEE 20
#define PAC207_AUTOGAIN_DEADZONE 30
-/* We calculating the autogain at the end of the transfer of a frame, at this
- moment a frame with the old settings is being transmitted, and a frame is
- being captured with the old settings. So if we adjust the autogain we must
- ignore atleast the 2 next frames for the new settings to come into effect
- before doing any other adjustments */
-#define PAC207_AUTOGAIN_IGNORE_FRAMES 3
/* specific webcam descriptor */
struct sd {
.minimum = 0,
.maximum = 1,
.step = 1,
- .default_value = 1,
+#define AUTOGAIN_DEF 1
+ .default_value = AUTOGAIN_DEF,
.flags = 0,
},
.set = sd_setautogain,
/* 48 reg_72 Rate Control end BalSize_4a =0x36 */
static const __u8 PacReg72[] = { 0x00, 0x00, 0x36, 0x00 };
-static const unsigned char pac207_sof_marker[5] =
- { 0xff, 0xff, 0x00, 0xff, 0x96 };
-
static int pac207_write_regs(struct gspca_dev *gspca_dev, u16 index,
const u8 *buffer, u16 length)
{
return -ENODEV;
}
- pac207_write_reg(gspca_dev, 0x41, 0x00);
- /* Bit_0=Image Format,
- * Bit_1=LED,
- * Bit_2=Compression test mode enable */
- pac207_write_reg(gspca_dev, 0x0f, 0x00); /* Power Control */
- pac207_write_reg(gspca_dev, 0x11, 0x30); /* Analog Bias */
-
PDEBUG(D_PROBE,
"Pixart PAC207BCA Image Processor and Control Chip detected"
" (vid/pid 0x%04X:0x%04X)", id->idVendor, id->idProduct);
cam = &gspca_dev->cam;
- cam->dev_name = (char *) id->driver_info;
cam->epaddr = 0x05;
cam->cam_mode = sif_mode;
cam->nmodes = ARRAY_SIZE(sif_mode);
sd->brightness = PAC207_BRIGHTNESS_DEFAULT;
sd->exposure = PAC207_EXPOSURE_DEFAULT;
sd->gain = PAC207_GAIN_DEFAULT;
+ sd->autogain = AUTOGAIN_DEF;
return 0;
}
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
{
- struct sd *sd = (struct sd *) gspca_dev;
+ pac207_write_reg(gspca_dev, 0x41, 0x00);
+ /* Bit_0=Image Format,
+ * Bit_1=LED,
+ * Bit_2=Compression test mode enable */
+ pac207_write_reg(gspca_dev, 0x0f, 0x00); /* Power Control */
+ pac207_write_reg(gspca_dev, 0x11, 0x30); /* Analog Bias */
- sd->autogain = 1;
return 0;
}
pac207_write_reg(gspca_dev, 0x0f, 0x00); /* Power Control */
}
-static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-}
-
-/* this function is called at close time */
-static void sd_close(struct gspca_dev *gspca_dev)
-{
-}
+/* Include pac common sof detection functions */
+#include "pac_common.h"
static void pac207_do_auto_gain(struct gspca_dev *gspca_dev)
{
else if (gspca_auto_gain_n_exposure(gspca_dev, avg_lum,
100 + sd->brightness / 2, PAC207_AUTOGAIN_DEADZONE,
PAC207_GAIN_KNEE, PAC207_EXPOSURE_KNEE))
- sd->autogain_ignore_frames = PAC207_AUTOGAIN_IGNORE_FRAMES;
-}
-
-static unsigned char *pac207_find_sof(struct gspca_dev *gspca_dev,
- unsigned char *m, int len)
-{
- struct sd *sd = (struct sd *) gspca_dev;
- int i;
-
- /* Search for the SOF marker (fixed part) in the header */
- for (i = 0; i < len; i++) {
- if (m[i] == pac207_sof_marker[sd->sof_read]) {
- sd->sof_read++;
- if (sd->sof_read == sizeof(pac207_sof_marker)) {
- PDEBUG(D_STREAM,
- "SOF found, bytes to analyze: %u."
- " Frame starts at byte #%u",
- len, i + 1);
- sd->sof_read = 0;
- return m + i + 1;
- }
- } else {
- sd->sof_read = 0;
- }
- }
-
- return NULL;
+ sd->autogain_ignore_frames = PAC_AUTOGAIN_IGNORE_FRAMES;
}
static void sd_pkt_scan(struct gspca_dev *gspca_dev,
struct sd *sd = (struct sd *) gspca_dev;
unsigned char *sof;
- sof = pac207_find_sof(gspca_dev, data, len);
+ sof = pac_find_sof(gspca_dev, data, len);
if (sof) {
int n;
/* finish decoding current frame */
n = sof - data;
- if (n > sizeof pac207_sof_marker)
- n -= sizeof pac207_sof_marker;
+ if (n > sizeof pac_sof_marker)
+ n -= sizeof pac_sof_marker;
else
n = 0;
frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame,
sd->gain = PAC207_GAIN_DEFAULT;
if (gspca_dev->streaming) {
sd->autogain_ignore_frames =
- PAC207_AUTOGAIN_IGNORE_FRAMES;
+ PAC_AUTOGAIN_IGNORE_FRAMES;
setexposure(gspca_dev);
setgain(gspca_dev);
}
.ctrls = sd_ctrls,
.nctrls = ARRAY_SIZE(sd_ctrls),
.config = sd_config,
- .open = sd_open,
+ .init = sd_init,
.start = sd_start,
.stopN = sd_stopN,
- .stop0 = sd_stop0,
- .close = sd_close,
.dq_callback = pac207_do_auto_gain,
.pkt_scan = sd_pkt_scan,
};
.id_table = device_table,
.probe = sd_probe,
.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+ .suspend = gspca_suspend,
+ .resume = gspca_resume,
+#endif
};
/* -- module insert / remove -- */
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+/* Some documentation about various registers as determined by trial and error.
+ When the register addresses differ between the 7202 and the 7311 the 2
+ different addresses are written as 7302addr/7311addr, when one of the 2
+ addresses is a - sign that register description is not valid for the
+ matching IC.
+
+ Register page 1:
+
+ Address Description
+ -/0x08 Unknown compressor related, must always be 8 except when not
+ in 640x480 resolution and page 4 reg 2 <= 3 then set it to 9 !
+ -/0x1b Auto white balance related, bit 0 is AWB enable (inverted)
+ bits 345 seem to toggle per color gains on/off (inverted)
+ 0x78 Global control, bit 6 controls the LED (inverted)
+ -/0x80 JPEG compression ratio ? Best not touched
+
+ Register page 3/4:
+
+ Address Description
+ 0x02 Clock divider 2-63, fps =~ 60 / val. Must be a multiple of 3 on
+ the 7302, so one of 3, 6, 9, ..., except when between 6 and 12?
+ -/0x0f Master gain 1-245, low value = high gain
+ 0x10/- Master gain 0-31
+ -/0x10 Another gain 0-15, limited influence (1-2x gain I guess)
+ 0x21 Bitfield: 0-1 unused, 2-3 vflip/hflip, 4-5 unknown, 6-7 unused
+ -/0x27 Seems to toggle various gains on / off, Setting bit 7 seems to
+ completely disable the analog amplification block. Set to 0x68
+ for max gain, 0x14 for minimal gain.
+*/
+
#define MODULE_NAME "pac7311"
#include "gspca.h"
struct sd {
struct gspca_dev gspca_dev; /* !! must be the first item */
- int lum_sum;
- atomic_t avg_lum;
- atomic_t do_gain;
-
unsigned char brightness;
unsigned char contrast;
unsigned char colors;
+ unsigned char gain;
+ unsigned char exposure;
unsigned char autogain;
+ __u8 hflip;
+ __u8 vflip;
+
+ __u8 sensor;
+#define SENSOR_PAC7302 0
+#define SENSOR_PAC7311 1
- char ffseq;
- signed char ag_cnt;
-#define AG_CNT_START 13
+ u8 sof_read;
+ u8 autogain_ignore_frames;
+
+ atomic_t avg_lum;
};
/* V4L2 controls supported by the driver */
static int sd_getcolors(struct gspca_dev *gspca_dev, __s32 *val);
static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val);
static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_sethflip(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_gethflip(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setvflip(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setgain(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getgain(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setexposure(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getexposure(struct gspca_dev *gspca_dev, __s32 *val);
static struct ctrl sd_ctrls[] = {
+/* This control is pac7302 only */
+#define BRIGHTNESS_IDX 0
{
{
.id = V4L2_CID_BRIGHTNESS,
.set = sd_setbrightness,
.get = sd_getbrightness,
},
+/* This control is for both the 7302 and the 7311 */
{
{
.id = V4L2_CID_CONTRAST,
.type = V4L2_CTRL_TYPE_INTEGER,
.name = "Contrast",
.minimum = 0,
- .maximum = 255,
+#define CONTRAST_MAX 255
+ .maximum = CONTRAST_MAX,
.step = 1,
#define CONTRAST_DEF 127
.default_value = CONTRAST_DEF,
.set = sd_setcontrast,
.get = sd_getcontrast,
},
+/* This control is pac7302 only */
+#define SATURATION_IDX 2
{
{
.id = V4L2_CID_SATURATION,
.type = V4L2_CTRL_TYPE_INTEGER,
- .name = "Color",
+ .name = "Saturation",
.minimum = 0,
- .maximum = 255,
+#define COLOR_MAX 255
+ .maximum = COLOR_MAX,
.step = 1,
#define COLOR_DEF 127
.default_value = COLOR_DEF,
.set = sd_setcolors,
.get = sd_getcolors,
},
+/* All controls below are for both the 7302 and the 7311 */
+ {
+ {
+ .id = V4L2_CID_GAIN,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Gain",
+ .minimum = 0,
+#define GAIN_MAX 255
+ .maximum = GAIN_MAX,
+ .step = 1,
+#define GAIN_DEF 127
+#define GAIN_KNEE 255 /* Gain seems to cause little noise on the pac73xx */
+ .default_value = GAIN_DEF,
+ },
+ .set = sd_setgain,
+ .get = sd_getgain,
+ },
+ {
+ {
+ .id = V4L2_CID_EXPOSURE,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Exposure",
+ .minimum = 0,
+#define EXPOSURE_MAX 255
+ .maximum = EXPOSURE_MAX,
+ .step = 1,
+#define EXPOSURE_DEF 16 /* 32 ms / 30 fps */
+#define EXPOSURE_KNEE 50 /* 100 ms / 10 fps */
+ .default_value = EXPOSURE_DEF,
+ },
+ .set = sd_setexposure,
+ .get = sd_getexposure,
+ },
{
{
.id = V4L2_CID_AUTOGAIN,
.set = sd_setautogain,
.get = sd_getautogain,
},
+ {
+ {
+ .id = V4L2_CID_HFLIP,
+ .type = V4L2_CTRL_TYPE_BOOLEAN,
+ .name = "Mirror",
+ .minimum = 0,
+ .maximum = 1,
+ .step = 1,
+#define HFLIP_DEF 0
+ .default_value = HFLIP_DEF,
+ },
+ .set = sd_sethflip,
+ .get = sd_gethflip,
+ },
+ {
+ {
+ .id = V4L2_CID_VFLIP,
+ .type = V4L2_CTRL_TYPE_BOOLEAN,
+ .name = "Vflip",
+ .minimum = 0,
+ .maximum = 1,
+ .step = 1,
+#define VFLIP_DEF 0
+ .default_value = VFLIP_DEF,
+ },
+ .set = sd_setvflip,
+ .get = sd_getvflip,
+ },
};
static struct v4l2_pix_format vga_mode[] = {
- {160, 120, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+ {160, 120, V4L2_PIX_FMT_PJPG, V4L2_FIELD_NONE,
.bytesperline = 160,
.sizeimage = 160 * 120 * 3 / 8 + 590,
.colorspace = V4L2_COLORSPACE_JPEG,
.priv = 2},
- {320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+ {320, 240, V4L2_PIX_FMT_PJPG, V4L2_FIELD_NONE,
.bytesperline = 320,
.sizeimage = 320 * 240 * 3 / 8 + 590,
.colorspace = V4L2_COLORSPACE_JPEG,
.priv = 1},
- {640, 480, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+ {640, 480, V4L2_PIX_FMT_PJPG, V4L2_FIELD_NONE,
.bytesperline = 640,
.sizeimage = 640 * 480 * 3 / 8 + 590,
.colorspace = V4L2_COLORSPACE_JPEG,
.priv = 0},
};
-#define PAC7311_JPEG_HEADER_SIZE (sizeof pac7311_jpeg_header) /* (594) */
-
-static const __u8 pac7311_jpeg_header[] = {
- 0xff, 0xd8,
- 0xff, 0xe0, 0x00, 0x03, 0x20,
- 0xff, 0xc0, 0x00, 0x11, 0x08,
- 0x01, 0xe0, /* 12: height */
- 0x02, 0x80, /* 14: width */
- 0x03, /* 16 */
- 0x01, 0x21, 0x00,
- 0x02, 0x11, 0x01,
- 0x03, 0x11, 0x01,
- 0xff, 0xdb, 0x00, 0x84,
- 0x00, 0x10, 0x0b, 0x0c, 0x0e, 0x0c, 0x0a, 0x10, 0x0e, 0x0d,
- 0x0e, 0x12, 0x11, 0x10, 0x13, 0x18, 0x28, 0x1a, 0x18, 0x16,
- 0x16, 0x18, 0x31, 0x23, 0x25, 0x1d, 0x28, 0x3a, 0x33, 0x3d,
- 0x3c, 0x39, 0x33, 0x38, 0x37, 0x40, 0x48, 0x5c, 0x4e, 0x40,
- 0x44, 0x57, 0x45, 0x37, 0x38, 0x50, 0x6d, 0x51, 0x57, 0x5f,
- 0x62, 0x67, 0x68, 0x67, 0x3e, 0x4d, 0x71, 0x79, 0x70, 0x64,
- 0x78, 0x5c, 0x65, 0x67, 0x63, 0x01, 0x11, 0x12, 0x12, 0x18,
- 0x15, 0x18, 0x2f, 0x1a, 0x1a, 0x2f, 0x63, 0x42, 0x38, 0x42,
- 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
- 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
- 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
- 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
- 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
- 0xff, 0xc4, 0x01, 0xa2, 0x00, 0x00, 0x01, 0x05, 0x01, 0x01,
- 0x01, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08,
- 0x09, 0x0a, 0x0b, 0x10, 0x00, 0x02, 0x01, 0x03, 0x03, 0x02,
- 0x04, 0x03, 0x05, 0x05, 0x04, 0x04, 0x00, 0x00, 0x01, 0x7d,
- 0x01, 0x02, 0x03, 0x00, 0x04, 0x11, 0x05, 0x12, 0x21, 0x31,
- 0x41, 0x06, 0x13, 0x51, 0x61, 0x07, 0x22, 0x71, 0x14, 0x32,
- 0x81, 0x91, 0xa1, 0x08, 0x23, 0x42, 0xb1, 0xc1, 0x15, 0x52,
- 0xd1, 0xf0, 0x24, 0x33, 0x62, 0x72, 0x82, 0x09, 0x0a, 0x16,
- 0x17, 0x18, 0x19, 0x1a, 0x25, 0x26, 0x27, 0x28, 0x29, 0x2a,
- 0x34, 0x35, 0x36, 0x37, 0x38, 0x39, 0x3a, 0x43, 0x44, 0x45,
- 0x46, 0x47, 0x48, 0x49, 0x4a, 0x53, 0x54, 0x55, 0x56, 0x57,
- 0x58, 0x59, 0x5a, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, 0x69,
- 0x6a, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, 0x79, 0x7a, 0x83,
- 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x92, 0x93, 0x94,
- 0x95, 0x96, 0x97, 0x98, 0x99, 0x9a, 0xa2, 0xa3, 0xa4, 0xa5,
- 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xb2, 0xb3, 0xb4, 0xb5, 0xb6,
- 0xb7, 0xb8, 0xb9, 0xba, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7,
- 0xc8, 0xc9, 0xca, 0xd2, 0xd3, 0xd4, 0xd5, 0xd6, 0xd7, 0xd8,
- 0xd9, 0xda, 0xe1, 0xe2, 0xe3, 0xe4, 0xe5, 0xe6, 0xe7, 0xe8,
- 0xe9, 0xea, 0xf1, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7, 0xf8,
- 0xf9, 0xfa, 0x01, 0x00, 0x03, 0x01, 0x01, 0x01, 0x01, 0x01,
- 0x01, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0a,
- 0x0b, 0x11, 0x00, 0x02, 0x01, 0x02, 0x04, 0x04, 0x03, 0x04,
- 0x07, 0x05, 0x04, 0x04, 0x00, 0x01, 0x02, 0x77, 0x00, 0x01,
- 0x02, 0x03, 0x11, 0x04, 0x05, 0x21, 0x31, 0x06, 0x12, 0x41,
- 0x51, 0x07, 0x61, 0x71, 0x13, 0x22, 0x32, 0x81, 0x08, 0x14,
- 0x42, 0x91, 0xa1, 0xb1, 0xc1, 0x09, 0x23, 0x33, 0x52, 0xf0,
- 0x15, 0x62, 0x72, 0xd1, 0x0a, 0x16, 0x24, 0x34, 0xe1, 0x25,
- 0xf1, 0x17, 0x18, 0x19, 0x1a, 0x26, 0x27, 0x28, 0x29, 0x2a,
- 0x35, 0x36, 0x37, 0x38, 0x39, 0x3a, 0x43, 0x44, 0x45, 0x46,
- 0x47, 0x48, 0x49, 0x4a, 0x53, 0x54, 0x55, 0x56, 0x57, 0x58,
- 0x59, 0x5a, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, 0x69, 0x6a,
- 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, 0x79, 0x7a, 0x82, 0x83,
- 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x92, 0x93, 0x94,
- 0x95, 0x96, 0x97, 0x98, 0x99, 0x9a, 0xa2, 0xa3, 0xa4, 0xa5,
- 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xb2, 0xb3, 0xb4, 0xb5, 0xb6,
- 0xb7, 0xb8, 0xb9, 0xba, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7,
- 0xc8, 0xc9, 0xca, 0xd2, 0xd3, 0xd4, 0xd5, 0xd6, 0xd7, 0xd8,
- 0xd9, 0xda, 0xe2, 0xe3, 0xe4, 0xe5, 0xe6, 0xe7, 0xe8, 0xe9,
- 0xea, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7, 0xf8, 0xf9, 0xfa,
- 0xff, 0xda, 0x00, 0x0c, 0x03, 0x01, 0x00, 0x02, 0x11, 0x03,
- 0x11, 0x00, 0x3f, 0x00
+/* pac 7302 */
+static const __u8 init_7302[] = {
+/* index,value */
+ 0xff, 0x01, /* page 1 */
+ 0x78, 0x00, /* deactivate */
+ 0xff, 0x01,
+ 0x78, 0x40, /* led off */
+};
+static const __u8 start_7302[] = {
+/* index, len, [value]* */
+ 0xff, 1, 0x00, /* page 0 */
+ 0x00, 12, 0x01, 0x40, 0x40, 0x40, 0x01, 0xe0, 0x02, 0x80,
+ 0x00, 0x00, 0x00, 0x00,
+ 0x0d, 24, 0x03, 0x01, 0x00, 0xb5, 0x07, 0xcb, 0x00, 0x00,
+ 0x07, 0xc8, 0x00, 0xea, 0x07, 0xcf, 0x07, 0xf7,
+ 0x07, 0x7e, 0x01, 0x0b, 0x00, 0x00, 0x00, 0x11,
+ 0x26, 2, 0xaa, 0xaa,
+ 0x2e, 1, 0x31,
+ 0x38, 1, 0x01,
+ 0x3a, 3, 0x14, 0xff, 0x5a,
+ 0x43, 11, 0x00, 0x0a, 0x18, 0x11, 0x01, 0x2c, 0x88, 0x11,
+ 0x00, 0x54, 0x11,
+ 0x55, 1, 0x00,
+ 0x62, 4, 0x10, 0x1e, 0x1e, 0x18,
+ 0x6b, 1, 0x00,
+ 0x6e, 3, 0x08, 0x06, 0x00,
+ 0x72, 3, 0x00, 0xff, 0x00,
+ 0x7d, 23, 0x01, 0x01, 0x58, 0x46, 0x50, 0x3c, 0x50, 0x3c,
+ 0x54, 0x46, 0x54, 0x56, 0x52, 0x50, 0x52, 0x50,
+ 0x56, 0x64, 0xa4, 0x00, 0xda, 0x00, 0x00,
+ 0xa2, 10, 0x22, 0x2c, 0x3c, 0x54, 0x69, 0x7c, 0x9c, 0xb9,
+ 0xd2, 0xeb,
+ 0xaf, 1, 0x02,
+ 0xb5, 2, 0x08, 0x08,
+ 0xb8, 2, 0x08, 0x88,
+ 0xc4, 4, 0xae, 0x01, 0x04, 0x01,
+ 0xcc, 1, 0x00,
+ 0xd1, 11, 0x01, 0x30, 0x49, 0x5e, 0x6f, 0x7f, 0x8e, 0xa9,
+ 0xc1, 0xd7, 0xec,
+ 0xdc, 1, 0x01,
+ 0xff, 1, 0x01, /* page 1 */
+ 0x12, 3, 0x02, 0x00, 0x01,
+ 0x3e, 2, 0x00, 0x00,
+ 0x76, 5, 0x01, 0x20, 0x40, 0x00, 0xf2,
+ 0x7c, 1, 0x00,
+ 0x7f, 10, 0x4b, 0x0f, 0x01, 0x2c, 0x02, 0x58, 0x03, 0x20,
+ 0x02, 0x00,
+ 0x96, 5, 0x01, 0x10, 0x04, 0x01, 0x04,
+ 0xc8, 14, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00,
+ 0x07, 0x00, 0x01, 0x07, 0x04, 0x01,
+ 0xd8, 1, 0x01,
+ 0xdb, 2, 0x00, 0x01,
+ 0xde, 7, 0x00, 0x01, 0x04, 0x04, 0x00, 0x00, 0x00,
+ 0xe6, 4, 0x00, 0x00, 0x00, 0x01,
+ 0xeb, 1, 0x00,
+ 0xff, 1, 0x02, /* page 2 */
+ 0x22, 1, 0x00,
+ 0xff, 1, 0x03, /* page 3 */
+ 0x00, 255, /* load the page 3 */
+ 0x11, 1, 0x01,
+ 0xff, 1, 0x02, /* page 2 */
+ 0x13, 1, 0x00,
+ 0x22, 4, 0x1f, 0xa4, 0xf0, 0x96,
+ 0x27, 2, 0x14, 0x0c,
+ 0x2a, 5, 0xc8, 0x00, 0x18, 0x12, 0x22,
+ 0x64, 8, 0x00, 0x00, 0xf0, 0x01, 0x14, 0x44, 0x44, 0x44,
+ 0x6e, 1, 0x08,
+ 0xff, 1, 0x01, /* page 1 */
+ 0x78, 1, 0x00,
+ 0, 0 /* end of sequence */
+};
+
+/* page 3 - the value 0xaa says skip the index - see reg_w_page() */
+static const __u8 page3_7302[] = {
+ 0x90, 0x40, 0x03, 0x50, 0xc2, 0x01, 0x14, 0x16,
+ 0x14, 0x12, 0x00, 0x00, 0x00, 0x02, 0x33, 0x00,
+ 0x0f, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x47, 0x01, 0xb3, 0x01, 0x00,
+ 0x00, 0x08, 0x00, 0x00, 0x0d, 0x00, 0x00, 0x21,
+ 0x00, 0x00, 0x00, 0x54, 0xf4, 0x02, 0x52, 0x54,
+ 0xa4, 0xb8, 0xe0, 0x2a, 0xf6, 0x00, 0x00, 0x00,
+ 0x00, 0x1e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0xfc, 0x00, 0xf2, 0x1f, 0x04, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0xc0, 0xc0, 0x10, 0x00, 0x00,
+ 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x40, 0xff, 0x03, 0x19, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0xc8, 0xc8, 0xc8,
+ 0xc8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50,
+ 0x08, 0x10, 0x24, 0x40, 0x00, 0x00, 0x00, 0x00,
+ 0x01, 0x00, 0x02, 0x47, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x02, 0xfa, 0x00, 0x64, 0x5a, 0x28, 0x00,
+ 0x00
+};
+
+/* pac 7311 */
+static const __u8 init_7311[] = {
+ 0x78, 0x40, /* Bit_0=start stream, Bit_6=LED */
+ 0x78, 0x40, /* Bit_0=start stream, Bit_6=LED */
+ 0x78, 0x44, /* Bit_0=start stream, Bit_6=LED */
+ 0xff, 0x04,
+ 0x27, 0x80,
+ 0x28, 0xca,
+ 0x29, 0x53,
+ 0x2a, 0x0e,
+ 0xff, 0x01,
+ 0x3e, 0x20,
+};
+
+static const __u8 start_7311[] = {
+/* index, len, [value]* */
+ 0xff, 1, 0x01, /* page 1 */
+ 0x02, 43, 0x48, 0x0a, 0x40, 0x08, 0x00, 0x00, 0x08, 0x00,
+ 0x06, 0xff, 0x11, 0xff, 0x5a, 0x30, 0x90, 0x4c,
+ 0x00, 0x07, 0x00, 0x0a, 0x10, 0x00, 0xa0, 0x10,
+ 0x02, 0x00, 0x00, 0x00, 0x00, 0x0b, 0x01, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00,
+ 0x3e, 42, 0x00, 0x00, 0x78, 0x52, 0x4a, 0x52, 0x78, 0x6e,
+ 0x48, 0x46, 0x48, 0x6e, 0x5f, 0x49, 0x42, 0x49,
+ 0x5f, 0x5f, 0x49, 0x42, 0x49, 0x5f, 0x6e, 0x48,
+ 0x46, 0x48, 0x6e, 0x78, 0x52, 0x4a, 0x52, 0x78,
+ 0x00, 0x00, 0x09, 0x1b, 0x34, 0x49, 0x5c, 0x9b,
+ 0xd0, 0xff,
+ 0x78, 6, 0x44, 0x00, 0xf2, 0x01, 0x01, 0x80,
+ 0x7f, 18, 0x2a, 0x1c, 0x00, 0xc8, 0x02, 0x58, 0x03, 0x84,
+ 0x12, 0x00, 0x1a, 0x04, 0x08, 0x0c, 0x10, 0x14,
+ 0x18, 0x20,
+ 0x96, 3, 0x01, 0x08, 0x04,
+ 0xa0, 4, 0x44, 0x44, 0x44, 0x04,
+ 0xf0, 13, 0x01, 0x00, 0x00, 0x00, 0x22, 0x00, 0x20, 0x00,
+ 0x3f, 0x00, 0x0a, 0x01, 0x00,
+ 0xff, 1, 0x04, /* page 4 */
+ 0x00, 254, /* load the page 4 */
+ 0x11, 1, 0x01,
+ 0, 0 /* end of sequence */
+};
+
+/* page 4 - the value 0xaa says skip the index - see reg_w_page() */
+static const __u8 page4_7311[] = {
+ 0xaa, 0xaa, 0x04, 0x54, 0x07, 0x2b, 0x09, 0x0f,
+ 0x09, 0x00, 0xaa, 0xaa, 0x07, 0x00, 0x00, 0x62,
+ 0x08, 0xaa, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x03, 0xa0, 0x01, 0xf4, 0xaa,
+ 0xaa, 0x00, 0x08, 0xaa, 0x03, 0xaa, 0x00, 0x68,
+ 0xca, 0x10, 0x06, 0x78, 0x00, 0x00, 0x00, 0x00,
+ 0x23, 0x28, 0x04, 0x11, 0x00, 0x00
};
static void reg_w_buf(struct gspca_dev *gspca_dev,
- __u16 index,
- const char *buffer, __u16 len)
+ __u8 index,
+ const char *buffer, int len)
{
memcpy(gspca_dev->usb_buf, buffer, len);
usb_control_msg(gspca_dev->dev,
500);
}
-static __u8 reg_r(struct gspca_dev *gspca_dev,
- __u16 index)
-{
- usb_control_msg(gspca_dev->dev,
- usb_rcvctrlpipe(gspca_dev->dev, 0),
- 0, /* request */
- USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- 0, /* value */
- index, gspca_dev->usb_buf, 1,
- 500);
- return gspca_dev->usb_buf[0];
-}
static void reg_w(struct gspca_dev *gspca_dev,
- __u16 index,
+ __u8 index,
__u8 value)
{
gspca_dev->usb_buf[0] = value;
usb_sndctrlpipe(gspca_dev->dev, 0),
0, /* request */
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- value, index, gspca_dev->usb_buf, 1,
+ 0, index, gspca_dev->usb_buf, 1,
500);
}
+static void reg_w_seq(struct gspca_dev *gspca_dev,
+ const __u8 *seq, int len)
+{
+ while (--len >= 0) {
+ reg_w(gspca_dev, seq[0], seq[1]);
+ seq += 2;
+ }
+}
+
+/* load the beginning of a page */
+static void reg_w_page(struct gspca_dev *gspca_dev,
+ const __u8 *page, int len)
+{
+ int index;
+
+ for (index = 0; index < len; index++) {
+ if (page[index] == 0xaa) /* skip this index */
+ continue;
+ gspca_dev->usb_buf[0] = page[index];
+ usb_control_msg(gspca_dev->dev,
+ usb_sndctrlpipe(gspca_dev->dev, 0),
+ 0, /* request */
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ 0, index, gspca_dev->usb_buf, 1,
+ 500);
+ }
+}
+
+/* output a variable sequence */
+static void reg_w_var(struct gspca_dev *gspca_dev,
+ const __u8 *seq)
+{
+ int index, len;
+
+ for (;;) {
+ index = *seq++;
+ len = *seq++;
+ switch (len) {
+ case 0:
+ return;
+ case 254:
+ reg_w_page(gspca_dev, page4_7311, sizeof page4_7311);
+ break;
+ case 255:
+ reg_w_page(gspca_dev, page3_7302, sizeof page3_7302);
+ break;
+ default:
+ if (len > 64) {
+ PDEBUG(D_ERR|D_STREAM,
+ "Incorrect variable sequence");
+ return;
+ }
+ while (len > 0) {
+ if (len < 8) {
+ reg_w_buf(gspca_dev, index, seq, len);
+ seq += len;
+ break;
+ }
+ reg_w_buf(gspca_dev, index, seq, 8);
+ seq += 8;
+ index += 8;
+ len -= 8;
+ }
+ }
+ }
+ /* not reached */
+}
+
/* this function is called at probe time */
static int sd_config(struct gspca_dev *gspca_dev,
const struct usb_device_id *id)
struct sd *sd = (struct sd *) gspca_dev;
struct cam *cam;
- PDEBUG(D_CONF, "Find Sensor PAC7311");
- reg_w(gspca_dev, 0x78, 0x40); /* Bit_0=start stream, Bit_7=LED */
- reg_w(gspca_dev, 0x78, 0x40); /* Bit_0=start stream, Bit_7=LED */
- reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_7=LED */
- reg_w(gspca_dev, 0xff, 0x04);
- reg_w(gspca_dev, 0x27, 0x80);
- reg_w(gspca_dev, 0x28, 0xca);
- reg_w(gspca_dev, 0x29, 0x53);
- reg_w(gspca_dev, 0x2a, 0x0e);
- reg_w(gspca_dev, 0xff, 0x01);
- reg_w(gspca_dev, 0x3e, 0x20);
-
cam = &gspca_dev->cam;
cam->epaddr = 0x05;
- cam->cam_mode = vga_mode;
- cam->nmodes = ARRAY_SIZE(vga_mode);
+
+ sd->sensor = id->driver_info;
+ if (sd->sensor == SENSOR_PAC7302) {
+ PDEBUG(D_CONF, "Find Sensor PAC7302");
+ cam->cam_mode = &vga_mode[2]; /* only 640x480 */
+ cam->nmodes = 1;
+ } else {
+ PDEBUG(D_CONF, "Find Sensor PAC7311");
+ cam->cam_mode = vga_mode;
+ cam->nmodes = ARRAY_SIZE(vga_mode);
+ gspca_dev->ctrl_dis = (1 << BRIGHTNESS_IDX)
+ | (1 << SATURATION_IDX);
+ }
sd->brightness = BRIGHTNESS_DEF;
sd->contrast = CONTRAST_DEF;
sd->colors = COLOR_DEF;
+ sd->gain = GAIN_DEF;
+ sd->exposure = EXPOSURE_DEF;
sd->autogain = AUTOGAIN_DEF;
- sd->ag_cnt = -1;
+ sd->hflip = HFLIP_DEF;
+ sd->vflip = VFLIP_DEF;
return 0;
}
-static void setbrightness(struct gspca_dev *gspca_dev)
+/* This function is used by pac7302 only */
+static void setbrightcont(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ int i, v;
+ static const __u8 max[10] =
+ {0x29, 0x33, 0x42, 0x5a, 0x6e, 0x80, 0x9f, 0xbb,
+ 0xd4, 0xec};
+ static const __u8 delta[10] =
+ {0x35, 0x33, 0x33, 0x2f, 0x2a, 0x25, 0x1e, 0x17,
+ 0x11, 0x0b};
+
+ reg_w(gspca_dev, 0xff, 0x00); /* page 0 */
+ for (i = 0; i < 10; i++) {
+ v = max[i];
+ v += (sd->brightness - BRIGHTNESS_MAX)
+ * 150 / BRIGHTNESS_MAX; /* 200 ? */
+ v -= delta[i] * sd->contrast / CONTRAST_MAX;
+ if (v < 0)
+ v = 0;
+ else if (v > 0xff)
+ v = 0xff;
+ reg_w(gspca_dev, 0xa2 + i, v);
+ }
+ reg_w(gspca_dev, 0xdc, 0x01);
+}
+
+/* This function is used by pac7311 only */
+static void setcontrast(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
- int brightness;
-/*jfm: inverted?*/
- brightness = BRIGHTNESS_MAX - sd->brightness;
reg_w(gspca_dev, 0xff, 0x04);
-/* reg_w(gspca_dev, 0x0e, 0x00); */
- reg_w(gspca_dev, 0x0f, brightness);
+ reg_w(gspca_dev, 0x10, sd->contrast >> 4);
/* load registers to sensor (Bit 0, auto clear) */
reg_w(gspca_dev, 0x11, 0x01);
- PDEBUG(D_CONF|D_STREAM, "brightness: %i", brightness);
}
-static void setcontrast(struct gspca_dev *gspca_dev)
+/* This function is used by pac7302 only */
+static void setcolors(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
+ int i, v;
+ static const int a[9] =
+ {217, -212, 0, -101, 170, -67, -38, -315, 355};
+ static const int b[9] =
+ {19, 106, 0, 19, 106, 1, 19, 106, 1};
- reg_w(gspca_dev, 0xff, 0x01);
- reg_w(gspca_dev, 0x80, sd->contrast);
- /* load registers to sensor (Bit 0, auto clear) */
+ reg_w(gspca_dev, 0xff, 0x03); /* page 3 */
reg_w(gspca_dev, 0x11, 0x01);
- PDEBUG(D_CONF|D_STREAM, "contrast: %i", sd->contrast);
+ reg_w(gspca_dev, 0xff, 0x00); /* page 0 */
+ reg_w(gspca_dev, 0xff, 0x00); /* page 0 */
+ for (i = 0; i < 9; i++) {
+ v = a[i] * sd->colors / COLOR_MAX + b[i];
+ reg_w(gspca_dev, 0x0f + 2 * i, (v >> 8) & 0x07);
+ reg_w(gspca_dev, 0x0f + 2 * i + 1, v);
+ }
+ reg_w(gspca_dev, 0xdc, 0x01);
+ PDEBUG(D_CONF|D_STREAM, "color: %i", sd->colors);
}
-static void setcolors(struct gspca_dev *gspca_dev)
+static void setgain(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
- reg_w(gspca_dev, 0xff, 0x01);
- reg_w(gspca_dev, 0x10, sd->colors);
+ if (sd->sensor == SENSOR_PAC7302) {
+ reg_w(gspca_dev, 0xff, 0x03); /* page 3 */
+ reg_w(gspca_dev, 0x10, sd->gain >> 3);
+ } else {
+ int gain = GAIN_MAX - sd->gain;
+ if (gain < 1)
+ gain = 1;
+ else if (gain > 245)
+ gain = 245;
+ reg_w(gspca_dev, 0xff, 0x04); /* page 4 */
+ reg_w(gspca_dev, 0x0e, 0x00);
+ reg_w(gspca_dev, 0x0f, gain);
+ }
/* load registers to sensor (Bit 0, auto clear) */
reg_w(gspca_dev, 0x11, 0x01);
- PDEBUG(D_CONF|D_STREAM, "color: %i", sd->colors);
}
-static void setautogain(struct gspca_dev *gspca_dev)
+static void setexposure(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
+ __u8 reg;
+
+ /* register 2 of frame 3/4 contains the clock divider configuring the
+ no fps according to the formula: 60 / reg. sd->exposure is the
+ desired exposure time in ms. */
+ reg = 120 * sd->exposure / 1000;
+ if (reg < 2)
+ reg = 2;
+ else if (reg > 63)
+ reg = 63;
+
+ if (sd->sensor == SENSOR_PAC7302) {
+ /* On the pac7302 reg2 MUST be a multiple of 3, so round it to
+ the nearest multiple of 3, except when between 6 and 12? */
+ if (reg < 6 || reg > 12)
+ reg = ((reg + 1) / 3) * 3;
+ reg_w(gspca_dev, 0xff, 0x03); /* page 3 */
+ reg_w(gspca_dev, 0x02, reg);
+ } else {
+ reg_w(gspca_dev, 0xff, 0x04); /* page 4 */
+ reg_w(gspca_dev, 0x02, reg);
+ /* Page 1 register 8 must always be 0x08 except when not in
+ 640x480 mode and Page3/4 reg 2 <= 3 then it must be 9 */
+ reg_w(gspca_dev, 0xff, 0x01);
+ if (gspca_dev->cam.cam_mode[(int)gspca_dev->curr_mode].priv &&
+ reg <= 3)
+ reg_w(gspca_dev, 0x08, 0x09);
+ else
+ reg_w(gspca_dev, 0x08, 0x08);
+ }
+ /* load registers to sensor (Bit 0, auto clear) */
+ reg_w(gspca_dev, 0x11, 0x01);
+}
- if (sd->autogain) {
- sd->lum_sum = 0;
- sd->ag_cnt = AG_CNT_START;
+static void sethvflip(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ __u8 data;
+
+ if (sd->sensor == SENSOR_PAC7302) {
+ reg_w(gspca_dev, 0xff, 0x03); /* page 3 */
+ data = (sd->hflip ? 0x08 : 0x00)
+ | (sd->vflip ? 0x04 : 0x00);
} else {
- sd->ag_cnt = -1;
+ reg_w(gspca_dev, 0xff, 0x04); /* page 4 */
+ data = (sd->hflip ? 0x04 : 0x00)
+ | (sd->vflip ? 0x08 : 0x00);
}
+ reg_w(gspca_dev, 0x21, data);
+ /* load registers to sensor (Bit 0, auto clear) */
+ reg_w(gspca_dev, 0x11, 0x01);
}
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
{
- reg_w(gspca_dev, 0x78, 0x00); /* Turn on LED */
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ if (sd->sensor == SENSOR_PAC7302)
+ reg_w_seq(gspca_dev, init_7302, sizeof init_7302);
+ else
+ reg_w_seq(gspca_dev, init_7311, sizeof init_7311);
+
return 0;
}
static void sd_start(struct gspca_dev *gspca_dev)
{
- reg_w(gspca_dev, 0xff, 0x01);
- reg_w_buf(gspca_dev, 0x0002, "\x48\x0a\x40\x08\x00\x00\x08\x00", 8);
- reg_w_buf(gspca_dev, 0x000a, "\x06\xff\x11\xff\x5a\x30\x90\x4c", 8);
- reg_w_buf(gspca_dev, 0x0012, "\x00\x07\x00\x0a\x10\x00\xa0\x10", 8);
- reg_w_buf(gspca_dev, 0x001a, "\x02\x00\x00\x00\x00\x0b\x01\x00", 8);
- reg_w_buf(gspca_dev, 0x0022, "\x00\x00\x00\x00\x00\x00\x00\x00", 8);
- reg_w_buf(gspca_dev, 0x002a, "\x00\x00\x00", 3);
- reg_w_buf(gspca_dev, 0x003e, "\x00\x00\x78\x52\x4a\x52\x78\x6e", 8);
- reg_w_buf(gspca_dev, 0x0046, "\x48\x46\x48\x6e\x5f\x49\x42\x49", 8);
- reg_w_buf(gspca_dev, 0x004e, "\x5f\x5f\x49\x42\x49\x5f\x6e\x48", 8);
- reg_w_buf(gspca_dev, 0x0056, "\x46\x48\x6e\x78\x52\x4a\x52\x78", 8);
- reg_w_buf(gspca_dev, 0x005e, "\x00\x00\x09\x1b\x34\x49\x5c\x9b", 8);
- reg_w_buf(gspca_dev, 0x0066, "\xd0\xff", 2);
- reg_w_buf(gspca_dev, 0x0078, "\x44\x00\xf2\x01\x01\x80", 6);
- reg_w_buf(gspca_dev, 0x007f, "\x2a\x1c\x00\xc8\x02\x58\x03\x84", 8);
- reg_w_buf(gspca_dev, 0x0087, "\x12\x00\x1a\x04\x08\x0c\x10\x14", 8);
- reg_w_buf(gspca_dev, 0x008f, "\x18\x20", 2);
- reg_w_buf(gspca_dev, 0x0096, "\x01\x08\x04", 3);
- reg_w_buf(gspca_dev, 0x00a0, "\x44\x44\x44\x04", 4);
- reg_w_buf(gspca_dev, 0x00f0, "\x01\x00\x00\x00\x22\x00\x20\x00", 8);
- reg_w_buf(gspca_dev, 0x00f8, "\x3f\x00\x0a\x01\x00", 5);
+ struct sd *sd = (struct sd *) gspca_dev;
- reg_w(gspca_dev, 0xff, 0x04);
- reg_w(gspca_dev, 0x02, 0x04);
- reg_w(gspca_dev, 0x03, 0x54);
- reg_w(gspca_dev, 0x04, 0x07);
- reg_w(gspca_dev, 0x05, 0x2b);
- reg_w(gspca_dev, 0x06, 0x09);
- reg_w(gspca_dev, 0x07, 0x0f);
- reg_w(gspca_dev, 0x08, 0x09);
- reg_w(gspca_dev, 0x09, 0x00);
- reg_w(gspca_dev, 0x0c, 0x07);
- reg_w(gspca_dev, 0x0d, 0x00);
- reg_w(gspca_dev, 0x0e, 0x00);
- reg_w(gspca_dev, 0x0f, 0x62);
- reg_w(gspca_dev, 0x10, 0x08);
- reg_w(gspca_dev, 0x12, 0x07);
- reg_w(gspca_dev, 0x13, 0x00);
- reg_w(gspca_dev, 0x14, 0x00);
- reg_w(gspca_dev, 0x15, 0x00);
- reg_w(gspca_dev, 0x16, 0x00);
- reg_w(gspca_dev, 0x17, 0x00);
- reg_w(gspca_dev, 0x18, 0x00);
- reg_w(gspca_dev, 0x19, 0x00);
- reg_w(gspca_dev, 0x1a, 0x00);
- reg_w(gspca_dev, 0x1b, 0x03);
- reg_w(gspca_dev, 0x1c, 0xa0);
- reg_w(gspca_dev, 0x1d, 0x01);
- reg_w(gspca_dev, 0x1e, 0xf4);
- reg_w(gspca_dev, 0x21, 0x00);
- reg_w(gspca_dev, 0x22, 0x08);
- reg_w(gspca_dev, 0x24, 0x03);
- reg_w(gspca_dev, 0x26, 0x00);
- reg_w(gspca_dev, 0x27, 0x01);
- reg_w(gspca_dev, 0x28, 0xca);
- reg_w(gspca_dev, 0x29, 0x10);
- reg_w(gspca_dev, 0x2a, 0x06);
- reg_w(gspca_dev, 0x2b, 0x78);
- reg_w(gspca_dev, 0x2c, 0x00);
- reg_w(gspca_dev, 0x2d, 0x00);
- reg_w(gspca_dev, 0x2e, 0x00);
- reg_w(gspca_dev, 0x2f, 0x00);
- reg_w(gspca_dev, 0x30, 0x23);
- reg_w(gspca_dev, 0x31, 0x28);
- reg_w(gspca_dev, 0x32, 0x04);
- reg_w(gspca_dev, 0x33, 0x11);
- reg_w(gspca_dev, 0x34, 0x00);
- reg_w(gspca_dev, 0x35, 0x00);
- reg_w(gspca_dev, 0x11, 0x01);
- setcontrast(gspca_dev);
- setbrightness(gspca_dev);
- setcolors(gspca_dev);
- setautogain(gspca_dev);
+ sd->sof_read = 0;
+
+ if (sd->sensor == SENSOR_PAC7302) {
+ reg_w_var(gspca_dev, start_7302);
+ setbrightcont(gspca_dev);
+ setcolors(gspca_dev);
+ } else {
+ reg_w_var(gspca_dev, start_7311);
+ setcontrast(gspca_dev);
+ }
+ setgain(gspca_dev);
+ setexposure(gspca_dev);
+ sethvflip(gspca_dev);
/* set correct resolution */
switch (gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv) {
- case 2: /* 160x120 */
- reg_w(gspca_dev, 0xff, 0x04);
- reg_w(gspca_dev, 0x02, 0x03);
+ case 2: /* 160x120 pac7311 */
reg_w(gspca_dev, 0xff, 0x01);
- reg_w(gspca_dev, 0x08, 0x09);
reg_w(gspca_dev, 0x17, 0x20);
- reg_w(gspca_dev, 0x1b, 0x00);
-/* reg_w(gspca_dev, 0x80, 0x69); */
reg_w(gspca_dev, 0x87, 0x10);
break;
- case 1: /* 320x240 */
- reg_w(gspca_dev, 0xff, 0x04);
- reg_w(gspca_dev, 0x02, 0x03);
+ case 1: /* 320x240 pac7311 */
reg_w(gspca_dev, 0xff, 0x01);
- reg_w(gspca_dev, 0x08, 0x09);
reg_w(gspca_dev, 0x17, 0x30);
-/* reg_w(gspca_dev, 0x80, 0x3f); */
reg_w(gspca_dev, 0x87, 0x11);
break;
case 0: /* 640x480 */
- reg_w(gspca_dev, 0xff, 0x04);
- reg_w(gspca_dev, 0x02, 0x03);
+ if (sd->sensor == SENSOR_PAC7302)
+ break;
reg_w(gspca_dev, 0xff, 0x01);
- reg_w(gspca_dev, 0x08, 0x08);
reg_w(gspca_dev, 0x17, 0x00);
-/* reg_w(gspca_dev, 0x80, 0x1c); */
reg_w(gspca_dev, 0x87, 0x12);
break;
}
+ sd->sof_read = 0;
+ sd->autogain_ignore_frames = 0;
+ atomic_set(&sd->avg_lum, -1);
+
/* start stream */
reg_w(gspca_dev, 0xff, 0x01);
- reg_w(gspca_dev, 0x78, 0x04);
- reg_w(gspca_dev, 0x78, 0x05);
+ if (sd->sensor == SENSOR_PAC7302)
+ reg_w(gspca_dev, 0x78, 0x01);
+ else
+ reg_w(gspca_dev, 0x78, 0x05);
}
static void sd_stopN(struct gspca_dev *gspca_dev)
{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ if (sd->sensor == SENSOR_PAC7302) {
+ reg_w(gspca_dev, 0xff, 0x01);
+ reg_w(gspca_dev, 0x78, 0x00);
+ reg_w(gspca_dev, 0x78, 0x00);
+ return;
+ }
reg_w(gspca_dev, 0xff, 0x04);
reg_w(gspca_dev, 0x27, 0x80);
reg_w(gspca_dev, 0x28, 0xca);
reg_w(gspca_dev, 0x2a, 0x0e);
reg_w(gspca_dev, 0xff, 0x01);
reg_w(gspca_dev, 0x3e, 0x20);
- reg_w(gspca_dev, 0x78, 0x04); /* Bit_0=start stream, Bit_7=LED */
- reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_7=LED */
- reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_7=LED */
+ reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_6=LED */
+ reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_6=LED */
+ reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_6=LED */
}
static void sd_stop0(struct gspca_dev *gspca_dev)
{
-}
+ struct sd *sd = (struct sd *) gspca_dev;
-/* this function is called at close time */
-static void sd_close(struct gspca_dev *gspca_dev)
-{
- reg_w(gspca_dev, 0xff, 0x04);
- reg_w(gspca_dev, 0x27, 0x80);
- reg_w(gspca_dev, 0x28, 0xca);
- reg_w(gspca_dev, 0x29, 0x53);
- reg_w(gspca_dev, 0x2a, 0x0e);
- reg_w(gspca_dev, 0xff, 0x01);
- reg_w(gspca_dev, 0x3e, 0x20);
- reg_w(gspca_dev, 0x78, 0x04); /* Bit_0=start stream, Bit_7=LED */
- reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_7=LED */
- reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_7=LED */
+ if (sd->sensor == SENSOR_PAC7302) {
+ reg_w(gspca_dev, 0xff, 0x01);
+ reg_w(gspca_dev, 0x78, 0x40);
+ }
}
+/* Include pac common sof detection functions */
+#include "pac_common.h"
+
static void do_autogain(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
- int luma;
- int luma_mean = 128;
- int luma_delta = 20;
- __u8 spring = 5;
- int Gbright;
+ int avg_lum = atomic_read(&sd->avg_lum);
+ int desired_lum, deadzone;
- if (!atomic_read(&sd->do_gain))
+ if (avg_lum == -1)
return;
- atomic_set(&sd->do_gain, 0);
-
- luma = atomic_read(&sd->avg_lum);
- Gbright = reg_r(gspca_dev, 0x02);
- PDEBUG(D_FRAM, "luma mean %d", luma);
- if (luma < luma_mean - luma_delta ||
- luma > luma_mean + luma_delta) {
- Gbright += (luma_mean - luma) >> spring;
- if (Gbright > 0x1a)
- Gbright = 0x1a;
- else if (Gbright < 4)
- Gbright = 4;
- PDEBUG(D_FRAM, "gbright %d", Gbright);
- reg_w(gspca_dev, 0xff, 0x04);
- reg_w(gspca_dev, 0x0f, Gbright);
- /* load registers to sensor (Bit 0, auto clear) */
- reg_w(gspca_dev, 0x11, 0x01);
+
+ if (sd->sensor == SENSOR_PAC7302) {
+ desired_lum = 270 + sd->brightness * 4;
+ /* Hack hack, with the 7202 the first exposure step is
+ pretty large, so if we're about to make the first
+ exposure increase make the deadzone large to avoid
+ oscilating */
+ if (desired_lum > avg_lum && sd->gain == GAIN_DEF &&
+ sd->exposure > EXPOSURE_DEF &&
+ sd->exposure < 42)
+ deadzone = 90;
+ else
+ deadzone = 30;
+ } else {
+ desired_lum = 200;
+ deadzone = 20;
}
+
+ if (sd->autogain_ignore_frames > 0)
+ sd->autogain_ignore_frames--;
+ else if (gspca_auto_gain_n_exposure(gspca_dev, avg_lum, desired_lum,
+ deadzone, GAIN_KNEE, EXPOSURE_KNEE))
+ sd->autogain_ignore_frames = PAC_AUTOGAIN_IGNORE_FRAMES;
}
+static const unsigned char pac7311_jpeg_header1[] = {
+ 0xff, 0xd8, 0xff, 0xc0, 0x00, 0x11, 0x08
+};
+
+static const unsigned char pac7311_jpeg_header2[] = {
+ 0x03, 0x01, 0x21, 0x00, 0x02, 0x11, 0x01, 0x03, 0x11, 0x01, 0xff, 0xda,
+ 0x00, 0x0c, 0x03, 0x01, 0x00, 0x02, 0x11, 0x03, 0x11, 0x00, 0x3f, 0x00
+};
+
+/* this function is run at interrupt level */
static void sd_pkt_scan(struct gspca_dev *gspca_dev,
struct gspca_frame *frame, /* target */
__u8 *data, /* isoc packet */
int len) /* iso packet length */
{
struct sd *sd = (struct sd *) gspca_dev;
- unsigned char tmpbuf[4];
- int i, p, ffseq;
-
-/* if (len < 5) { */
- if (len < 6) {
-/* gspca_dev->last_packet_type = DISCARD_PACKET; */
- return;
- }
-
- ffseq = sd->ffseq;
-
- for (p = 0; p < len - 6; p++) {
- if ((data[0 + p] == 0xff)
- && (data[1 + p] == 0xff)
- && (data[2 + p] == 0x00)
- && (data[3 + p] == 0xff)
- && (data[4 + p] == 0x96)) {
-
- /* start of frame */
- if (sd->ag_cnt >= 0 && p > 28) {
- sd->lum_sum += data[p - 23];
- if (--sd->ag_cnt < 0) {
- sd->ag_cnt = AG_CNT_START;
- atomic_set(&sd->avg_lum,
- sd->lum_sum / AG_CNT_START);
- sd->lum_sum = 0;
- atomic_set(&sd->do_gain, 1);
- }
- }
+ unsigned char *sof;
+
+ sof = pac_find_sof(gspca_dev, data, len);
+ if (sof) {
+ unsigned char tmpbuf[4];
+ int n, lum_offset, footer_length;
+
+ if (sd->sensor == SENSOR_PAC7302) {
+ /* 6 bytes after the FF D9 EOF marker a number of lumination
+ bytes are send corresponding to different parts of the
+ image, the 14th and 15th byte after the EOF seem to
+ correspond to the center of the image */
+ lum_offset = 61 + sizeof pac_sof_marker;
+ footer_length = 74;
+ } else {
+ lum_offset = 24 + sizeof pac_sof_marker;
+ footer_length = 26;
+ }
- /* copy the end of data to the current frame */
+ /* Finish decoding current frame */
+ n = (sof - data) - (footer_length + sizeof pac_sof_marker);
+ if (n < 0) {
+ frame->data_end += n;
+ n = 0;
+ }
+ frame = gspca_frame_add(gspca_dev, INTER_PACKET, frame,
+ data, n);
+ if (gspca_dev->last_packet_type != DISCARD_PACKET &&
+ frame->data_end[-2] == 0xff &&
+ frame->data_end[-1] == 0xd9)
frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame,
- data, p);
-
- /* put the JPEG header in the new frame */
- gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
- (unsigned char *) pac7311_jpeg_header,
- 12);
+ NULL, 0);
+
+ n = sof - data;
+ len -= n;
+ data = sof;
+
+ /* Get average lumination */
+ if (gspca_dev->last_packet_type == LAST_PACKET &&
+ n >= lum_offset)
+ atomic_set(&sd->avg_lum, data[-lum_offset] +
+ data[-lum_offset + 1]);
+ else
+ atomic_set(&sd->avg_lum, -1);
+
+ /* Start the new frame with the jpeg header */
+ gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
+ pac7311_jpeg_header1, sizeof(pac7311_jpeg_header1));
+ if (sd->sensor == SENSOR_PAC7302) {
+ /* The PAC7302 has the image rotated 90 degrees */
+ tmpbuf[0] = gspca_dev->width >> 8;
+ tmpbuf[1] = gspca_dev->width & 0xff;
+ tmpbuf[2] = gspca_dev->height >> 8;
+ tmpbuf[3] = gspca_dev->height & 0xff;
+ } else {
tmpbuf[0] = gspca_dev->height >> 8;
tmpbuf[1] = gspca_dev->height & 0xff;
tmpbuf[2] = gspca_dev->width >> 8;
tmpbuf[3] = gspca_dev->width & 0xff;
- gspca_frame_add(gspca_dev, INTER_PACKET, frame,
- tmpbuf, 4);
- gspca_frame_add(gspca_dev, INTER_PACKET, frame,
- (unsigned char *) &pac7311_jpeg_header[16],
- PAC7311_JPEG_HEADER_SIZE - 16);
-
- data += p + 7;
- len -= p + 7;
- ffseq = 0;
- break;
}
+ gspca_frame_add(gspca_dev, INTER_PACKET, frame, tmpbuf, 4);
+ gspca_frame_add(gspca_dev, INTER_PACKET, frame,
+ pac7311_jpeg_header2, sizeof(pac7311_jpeg_header2));
}
-
- /* remove the 'ff ff ff xx' sequences */
- switch (ffseq) {
- case 3:
- data += 1;
- len -= 1;
- break;
- case 2:
- if (data[0] == 0xff) {
- data += 2;
- len -= 2;
- frame->data_end -= 2;
- }
- break;
- case 1:
- if (data[0] == 0xff
- && data[1] == 0xff) {
- data += 3;
- len -= 3;
- frame->data_end -= 1;
- }
- break;
- }
- for (i = 0; i < len - 4; i++) {
- if (data[i] == 0xff
- && data[i + 1] == 0xff
- && data[i + 2] == 0xff) {
- memmove(&data[i], &data[i + 4], len - i - 4);
- len -= 4;
- }
- }
- ffseq = 0;
- if (data[len - 4] == 0xff) {
- if (data[len - 3] == 0xff
- && data[len - 2] == 0xff) {
- len -= 4;
- }
- } else if (data[len - 3] == 0xff) {
- if (data[len - 2] == 0xff
- && data[len - 1] == 0xff)
- ffseq = 3;
- } else if (data[len - 2] == 0xff) {
- if (data[len - 1] == 0xff)
- ffseq = 2;
- } else if (data[len - 1] == 0xff)
- ffseq = 1;
- sd->ffseq = ffseq;
gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len);
}
-static void getbrightness(struct gspca_dev *gspca_dev)
-{
-/* sd->brightness = reg_r(gspca_dev, 0x08);
- return sd->brightness; */
-/* PDEBUG(D_CONF, "Called pac7311_getbrightness: Not implemented yet"); */
-}
-
-
-
static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val)
{
struct sd *sd = (struct sd *) gspca_dev;
sd->brightness = val;
if (gspca_dev->streaming)
- setbrightness(gspca_dev);
+ setbrightcont(gspca_dev);
return 0;
}
{
struct sd *sd = (struct sd *) gspca_dev;
- getbrightness(gspca_dev);
*val = sd->brightness;
return 0;
}
struct sd *sd = (struct sd *) gspca_dev;
sd->contrast = val;
- if (gspca_dev->streaming)
- setcontrast(gspca_dev);
+ if (gspca_dev->streaming) {
+ if (sd->sensor == SENSOR_PAC7302)
+ setbrightcont(gspca_dev);
+ else
+ setcontrast(gspca_dev);
+ }
return 0;
}
{
struct sd *sd = (struct sd *) gspca_dev;
-/* getcontrast(gspca_dev); */
*val = sd->contrast;
return 0;
}
{
struct sd *sd = (struct sd *) gspca_dev;
-/* getcolors(gspca_dev); */
*val = sd->colors;
return 0;
}
+static int sd_setgain(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->gain = val;
+ if (gspca_dev->streaming)
+ setgain(gspca_dev);
+ return 0;
+}
+
+static int sd_getgain(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->gain;
+ return 0;
+}
+
+static int sd_setexposure(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->exposure = val;
+ if (gspca_dev->streaming)
+ setexposure(gspca_dev);
+ return 0;
+}
+
+static int sd_getexposure(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->exposure;
+ return 0;
+}
+
static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val)
{
struct sd *sd = (struct sd *) gspca_dev;
sd->autogain = val;
- if (gspca_dev->streaming)
- setautogain(gspca_dev);
+ /* when switching to autogain set defaults to make sure
+ we are on a valid point of the autogain gain /
+ exposure knee graph, and give this change time to
+ take effect before doing autogain. */
+ if (sd->autogain) {
+ sd->exposure = EXPOSURE_DEF;
+ sd->gain = GAIN_DEF;
+ if (gspca_dev->streaming) {
+ sd->autogain_ignore_frames =
+ PAC_AUTOGAIN_IGNORE_FRAMES;
+ setexposure(gspca_dev);
+ setgain(gspca_dev);
+ }
+ }
+
return 0;
}
return 0;
}
+static int sd_sethflip(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->hflip = val;
+ if (gspca_dev->streaming)
+ sethvflip(gspca_dev);
+ return 0;
+}
+
+static int sd_gethflip(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->hflip;
+ return 0;
+}
+
+static int sd_setvflip(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->vflip = val;
+ if (gspca_dev->streaming)
+ sethvflip(gspca_dev);
+ return 0;
+}
+
+static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->vflip;
+ return 0;
+}
+
/* sub-driver description */
static struct sd_desc sd_desc = {
.name = MODULE_NAME,
.ctrls = sd_ctrls,
.nctrls = ARRAY_SIZE(sd_ctrls),
.config = sd_config,
- .open = sd_open,
+ .init = sd_init,
.start = sd_start,
.stopN = sd_stopN,
.stop0 = sd_stop0,
- .close = sd_close,
.pkt_scan = sd_pkt_scan,
.dq_callback = do_autogain,
};
/* -- module initialisation -- */
static __devinitdata struct usb_device_id device_table[] = {
- {USB_DEVICE(0x093a, 0x2600)},
- {USB_DEVICE(0x093a, 0x2601)},
- {USB_DEVICE(0x093a, 0x2603)},
- {USB_DEVICE(0x093a, 0x2608)},
- {USB_DEVICE(0x093a, 0x260e)},
- {USB_DEVICE(0x093a, 0x260f)},
- {USB_DEVICE(0x093a, 0x2621)},
+ {USB_DEVICE(0x093a, 0x2600), .driver_info = SENSOR_PAC7311},
+ {USB_DEVICE(0x093a, 0x2601), .driver_info = SENSOR_PAC7311},
+ {USB_DEVICE(0x093a, 0x2603), .driver_info = SENSOR_PAC7311},
+ {USB_DEVICE(0x093a, 0x2608), .driver_info = SENSOR_PAC7311},
+ {USB_DEVICE(0x093a, 0x260e), .driver_info = SENSOR_PAC7311},
+ {USB_DEVICE(0x093a, 0x260f), .driver_info = SENSOR_PAC7311},
+ {USB_DEVICE(0x093a, 0x2621), .driver_info = SENSOR_PAC7302},
+ {USB_DEVICE(0x093a, 0x2624), .driver_info = SENSOR_PAC7302},
+ {USB_DEVICE(0x093a, 0x2626), .driver_info = SENSOR_PAC7302},
{}
};
MODULE_DEVICE_TABLE(usb, device_table);
.id_table = device_table,
.probe = sd_probe,
.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+ .suspend = gspca_suspend,
+ .resume = gspca_resume,
+#endif
};
/* -- module insert / remove -- */
--- /dev/null
+/*
+ * Pixart PAC207BCA / PAC73xx common functions
+ *
+ * Copyright (C) 2008 Hans de Goede <j.w.r.degoede@hhs.nl>
+ * Copyright (C) 2005 Thomas Kaiser thomas@kaiser-linux.li
+ * Copyleft (C) 2005 Michel Xhaard mxhaard@magic.fr
+ *
+ * V4L2 by Jean-Francois Moine <http://moinejf.free.fr>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+/* We calculate the autogain at the end of the transfer of a frame, at this
+ moment a frame with the old settings is being transmitted, and a frame is
+ being captured with the old settings. So if we adjust the autogain we must
+ ignore atleast the 2 next frames for the new settings to come into effect
+ before doing any other adjustments */
+#define PAC_AUTOGAIN_IGNORE_FRAMES 3
+
+static const unsigned char pac_sof_marker[5] =
+ { 0xff, 0xff, 0x00, 0xff, 0x96 };
+
+static unsigned char *pac_find_sof(struct gspca_dev *gspca_dev,
+ unsigned char *m, int len)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ int i;
+
+ /* Search for the SOF marker (fixed part) in the header */
+ for (i = 0; i < len; i++) {
+ if (m[i] == pac_sof_marker[sd->sof_read]) {
+ sd->sof_read++;
+ if (sd->sof_read == sizeof(pac_sof_marker)) {
+ PDEBUG(D_FRAM,
+ "SOF found, bytes to analyze: %u."
+ " Frame starts at byte #%u",
+ len, i + 1);
+ sd->sof_read = 0;
+ return m + i + 1;
+ }
+ } else {
+ sd->sof_read = 0;
+ }
+ }
+
+ return NULL;
+}
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+/* Some documentation on known sonixb registers:
+
+Reg Use
+0x10 high nibble red gain low nibble blue gain
+0x11 low nibble green gain
+0x12 hstart
+0x13 vstart
+0x15 hsize (hsize = register-value * 16)
+0x16 vsize (vsize = register-value * 16)
+0x17 bit 0 toggle compression quality (according to sn9c102 driver)
+0x18 bit 7 enables compression, bit 4-5 set image down scaling:
+ 00 scale 1, 01 scale 1/2, 10, scale 1/4
+0x19 high-nibble is sensor clock divider, changes exposure on sensors which
+ use a clock generated by the bridge. Some sensors have their own clock.
+0x1c auto_exposure area (for avg_lum) startx (startx = register-value * 32)
+0x1d auto_exposure area (for avg_lum) starty (starty = register-value * 32)
+0x1e auto_exposure area (for avg_lum) stopx (hsize = (0x1e - 0x1c) * 32)
+0x1f auto_exposure area (for avg_lum) stopy (vsize = (0x1f - 0x1d) * 32)
+*/
+
#define MODULE_NAME "sonixb"
#include "gspca.h"
/* specific webcam descriptor */
struct sd {
struct gspca_dev gspca_dev; /* !! must be the first item */
-
- struct sd_desc sd_desc; /* our nctrls differ dependend upon the
- sensor, so we use a per cam copy */
atomic_t avg_lum;
+ int prev_avg_lum;
unsigned char gain;
unsigned char exposure;
unsigned char frames_to_drop;
unsigned char freq; /* light freq filter setting */
- unsigned char fr_h_sz; /* size of frame header */
- char sensor; /* Type of image sensor chip */
+ __u8 bridge; /* Type of bridge */
+#define BRIDGE_101 0
+#define BRIDGE_102 0 /* We make no difference between 101 and 102 */
+#define BRIDGE_103 1
+
+ __u8 sensor; /* Type of image sensor chip */
#define SENSOR_HV7131R 0
#define SENSOR_OV6650 1
#define SENSOR_OV7630 2
#define SENSOR_PAS202 4
#define SENSOR_TAS5110 5
#define SENSOR_TAS5130CXX 6
- char sensor_has_gain;
- __u8 sensor_addr;
__u8 reg11;
};
-/* flags used in the device id table */
+typedef const __u8 sensor_init_t[8];
+
+struct sensor_data {
+ const __u8 *bridge_init[2];
+ int bridge_init_size[2];
+ sensor_init_t *sensor_init;
+ int sensor_init_size;
+ sensor_init_t *sensor_bridge_init[2];
+ int sensor_bridge_init_size[2];
+ int flags;
+ unsigned ctrl_dis;
+ __u8 sensor_addr;
+};
+
+/* sensor_data flags */
#define F_GAIN 0x01 /* has gain */
-#define F_AUTO 0x02 /* has autogain */
-#define F_SIF 0x04 /* sif or vga */
-#define F_H18 0x08 /* long (18 b) or short (12 b) frame header */
+#define F_SIF 0x02 /* sif or vga */
+
+/* priv field of struct v4l2_pix_format flags (do not use low nibble!) */
+#define MODE_RAW 0x10 /* raw bayer mode */
+#define MODE_REDUCED_SIF 0x20 /* vga mode (320x240 / 160x120) on sif cam */
+
+/* ctrl_dis helper macros */
+#define NO_EXPO ((1 << EXPOSURE_IDX) | (1 << AUTOGAIN_IDX))
+#define NO_FREQ (1 << FREQ_IDX)
+#define NO_BRIGHTNESS (1 << BRIGHTNESS_IDX)
#define COMP2 0x8f
#define COMP 0xc7 /* 0x87 //0x07 */
#define SYS_CLK 0x04
+#define SENS(bridge_1, bridge_3, sensor, sensor_1, \
+ sensor_3, _flags, _ctrl_dis, _sensor_addr) \
+{ \
+ .bridge_init = { bridge_1, bridge_3 }, \
+ .bridge_init_size = { sizeof(bridge_1), sizeof(bridge_3) }, \
+ .sensor_init = sensor, \
+ .sensor_init_size = sizeof(sensor), \
+ .sensor_bridge_init = { sensor_1, sensor_3,}, \
+ .sensor_bridge_init_size = { sizeof(sensor_1), sizeof(sensor_3)}, \
+ .flags = _flags, .ctrl_dis = _ctrl_dis, .sensor_addr = _sensor_addr \
+}
+
/* We calculate the autogain at the end of the transfer of a frame, at this
moment a frame with the old settings is being transmitted, and a frame is
being captured with the old settings. So if we adjust the autogain we must
static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val);
static struct ctrl sd_ctrls[] = {
+#define BRIGHTNESS_IDX 0
{
{
.id = V4L2_CID_BRIGHTNESS,
.set = sd_setbrightness,
.get = sd_getbrightness,
},
+#define GAIN_IDX 1
{
{
.id = V4L2_CID_GAIN,
.set = sd_setgain,
.get = sd_getgain,
},
+#define EXPOSURE_IDX 2
{
{
.id = V4L2_CID_EXPOSURE,
.set = sd_setexposure,
.get = sd_getexposure,
},
+#define AUTOGAIN_IDX 3
{
{
.id = V4L2_CID_AUTOGAIN,
.set = sd_setautogain,
.get = sd_getautogain,
},
+#define FREQ_IDX 4
{
{
.id = V4L2_CID_POWER_LINE_FREQUENCY,
};
static struct v4l2_pix_format vga_mode[] = {
+ {160, 120, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+ .bytesperline = 160,
+ .sizeimage = 160 * 120 * 5 / 4,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 2 | MODE_RAW},
{160, 120, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE,
.bytesperline = 160,
- .sizeimage = 160 * 120,
+ .sizeimage = 160 * 120 * 5 / 4,
.colorspace = V4L2_COLORSPACE_SRGB,
.priv = 2},
{320, 240, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE,
.bytesperline = 320,
- .sizeimage = 320 * 240,
+ .sizeimage = 320 * 240 * 5 / 4,
.colorspace = V4L2_COLORSPACE_SRGB,
.priv = 1},
{640, 480, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE,
.bytesperline = 640,
- .sizeimage = 640 * 480,
+ .sizeimage = 640 * 480 * 5 / 4,
.colorspace = V4L2_COLORSPACE_SRGB,
.priv = 0},
};
static struct v4l2_pix_format sif_mode[] = {
+ {160, 120, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+ .bytesperline = 160,
+ .sizeimage = 160 * 120,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 1 | MODE_RAW | MODE_REDUCED_SIF},
+ {160, 120, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE,
+ .bytesperline = 160,
+ .sizeimage = 160 * 120 * 5 / 4,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 1 | MODE_REDUCED_SIF},
+ {176, 144, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+ .bytesperline = 176,
+ .sizeimage = 176 * 144 * 5 / 4,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 1 | MODE_RAW},
{176, 144, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE,
.bytesperline = 176,
- .sizeimage = 176 * 144,
+ .sizeimage = 176 * 144 * 5 / 4,
.colorspace = V4L2_COLORSPACE_SRGB,
.priv = 1},
+ {320, 240, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE,
+ .bytesperline = 320,
+ .sizeimage = 320 * 240 * 5 / 4,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 0 | MODE_REDUCED_SIF},
{352, 288, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE,
.bytesperline = 352,
- .sizeimage = 352 * 288,
+ .sizeimage = 352 * 288 * 5 / 4,
.colorspace = V4L2_COLORSPACE_SRGB,
.priv = 0},
};
static const __u8 initHv7131[] = {
0x46, 0x77, 0x00, 0x04, 0x00, 0x00, 0x00, 0x80, 0x11, 0x00, 0x00, 0x00,
0x00, 0x00,
- 0x00, 0x00, 0x00, 0x03, 0x01, 0x00, /* shift from 0x02 0x01 0x00 */
+ 0x00, 0x00, 0x00, 0x02, 0x01, 0x00,
0x28, 0x1e, 0x60, 0x8a, 0x20,
0x1d, 0x10, 0x02, 0x03, 0x0f, 0x0c
};
static const __u8 initOv6650[] = {
0x44, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80,
0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x02, 0x01, 0x0a, 0x16, 0x12, 0x68, 0x0b,
- 0x10, 0x1d, 0x10, 0x00, 0x06, 0x1f, 0x00
+ 0x00, 0x01, 0x01, 0x0a, 0x16, 0x12, 0x68, 0x8b,
+ 0x10, 0x1d, 0x10, 0x02, 0x02, 0x09, 0x07
};
static const __u8 ov6650_sensor_init[][8] =
{
static const __u8 initOv7630[] = {
0x04, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, /* r01 .. r08 */
0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* r09 .. r10 */
- 0x00, 0x02, 0x01, 0x0a, /* r11 .. r14 */
+ 0x00, 0x01, 0x01, 0x0a, /* r11 .. r14 */
0x28, 0x1e, /* H & V sizes r15 .. r16 */
- 0x68, COMP1, MCK_INIT1, /* r17 .. r19 */
+ 0x68, COMP2, MCK_INIT1, /* r17 .. r19 */
0x1d, 0x10, 0x02, 0x03, 0x0f, 0x0c /* r1a .. r1f */
};
static const __u8 initOv7630_3[] = {
0x44, 0x44, 0x00, 0x1a, 0x20, 0x20, 0x20, 0x80, /* r01 .. r08 */
0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, /* r09 .. r10 */
- 0x00, 0x01, 0x01, 0x0a, /* r11 .. r14 */
+ 0x00, 0x02, 0x01, 0x0a, /* r11 .. r14 */
0x28, 0x1e, /* H & V sizes r15 .. r16 */
0x68, 0x8f, MCK_INIT1, /* r17 .. r19 */
0x1d, 0x10, 0x02, 0x03, 0x0f, 0x0c, 0x00, /* r1a .. r20 */
{0xd0, 0x21, 0x17, 0x1c, 0xbd, 0x06, 0xf6, 0x10},
};
+static const __u8 ov7630_sensor_init_3[][8] = {
+ {0xa0, 0x21, 0x13, 0x80, 0x00, 0x00, 0x00, 0x10},
+};
+
static const __u8 initPas106[] = {
0x04, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x81, 0x40, 0x00, 0x00, 0x00,
0x00, 0x00,
- 0x00, 0x00, 0x00, 0x05, 0x01, 0x00,
- 0x16, 0x12, 0x28, COMP1, MCK_INIT1,
- 0x18, 0x10, 0x04, 0x03, 0x11, 0x0c
+ 0x00, 0x00, 0x00, 0x04, 0x01, 0x00,
+ 0x16, 0x12, 0x24, COMP1, MCK_INIT1,
+ 0x18, 0x10, 0x02, 0x02, 0x09, 0x07
};
/* compression 0x86 mckinit1 0x2b */
-static const __u8 pas106_data[][2] = {
- {0x02, 0x04}, /* Pixel Clock Divider 6 */
- {0x03, 0x13}, /* Frame Time MSB */
-/* {0x03, 0x12}, * Frame Time MSB */
- {0x04, 0x06}, /* Frame Time LSB */
-/* {0x04, 0x05}, * Frame Time LSB */
- {0x05, 0x65}, /* Shutter Time Line Offset */
-/* {0x05, 0x6d}, * Shutter Time Line Offset */
-/* {0x06, 0xb1}, * Shutter Time Pixel Offset */
- {0x06, 0xcd}, /* Shutter Time Pixel Offset */
- {0x07, 0xc1}, /* Black Level Subtract Sign */
-/* {0x07, 0x00}, * Black Level Subtract Sign */
- {0x08, 0x06}, /* Black Level Subtract Level */
- {0x08, 0x06}, /* Black Level Subtract Level */
-/* {0x08, 0x01}, * Black Level Subtract Level */
- {0x09, 0x05}, /* Color Gain B Pixel 5 a */
- {0x0a, 0x04}, /* Color Gain G1 Pixel 1 5 */
- {0x0b, 0x04}, /* Color Gain G2 Pixel 1 0 5 */
- {0x0c, 0x05}, /* Color Gain R Pixel 3 1 */
- {0x0d, 0x00}, /* Color GainH Pixel */
- {0x0e, 0x0e}, /* Global Gain */
- {0x0f, 0x00}, /* Contrast */
- {0x10, 0x06}, /* H&V synchro polarity */
- {0x11, 0x06}, /* ?default */
- {0x12, 0x06}, /* DAC scale */
- {0x14, 0x02}, /* ?default */
- {0x13, 0x01}, /* Validate Settings */
+static const __u8 pas106_sensor_init[][8] = {
+ /* Pixel Clock Divider 6 */
+ { 0xa1, 0x40, 0x02, 0x04, 0x00, 0x00, 0x00, 0x14 },
+ /* Frame Time MSB (also seen as 0x12) */
+ { 0xa1, 0x40, 0x03, 0x13, 0x00, 0x00, 0x00, 0x14 },
+ /* Frame Time LSB (also seen as 0x05) */
+ { 0xa1, 0x40, 0x04, 0x06, 0x00, 0x00, 0x00, 0x14 },
+ /* Shutter Time Line Offset (also seen as 0x6d) */
+ { 0xa1, 0x40, 0x05, 0x65, 0x00, 0x00, 0x00, 0x14 },
+ /* Shutter Time Pixel Offset (also seen as 0xb1) */
+ { 0xa1, 0x40, 0x06, 0xcd, 0x00, 0x00, 0x00, 0x14 },
+ /* Black Level Subtract Sign (also seen 0x00) */
+ { 0xa1, 0x40, 0x07, 0xc1, 0x00, 0x00, 0x00, 0x14 },
+ /* Black Level Subtract Level (also seen 0x01) */
+ { 0xa1, 0x40, 0x08, 0x06, 0x00, 0x00, 0x00, 0x14 },
+ { 0xa1, 0x40, 0x08, 0x06, 0x00, 0x00, 0x00, 0x14 },
+ /* Color Gain B Pixel 5 a */
+ { 0xa1, 0x40, 0x09, 0x05, 0x00, 0x00, 0x00, 0x14 },
+ /* Color Gain G1 Pixel 1 5 */
+ { 0xa1, 0x40, 0x0a, 0x04, 0x00, 0x00, 0x00, 0x14 },
+ /* Color Gain G2 Pixel 1 0 5 */
+ { 0xa1, 0x40, 0x0b, 0x04, 0x00, 0x00, 0x00, 0x14 },
+ /* Color Gain R Pixel 3 1 */
+ { 0xa1, 0x40, 0x0c, 0x05, 0x00, 0x00, 0x00, 0x14 },
+ /* Color GainH Pixel */
+ { 0xa1, 0x40, 0x0d, 0x00, 0x00, 0x00, 0x00, 0x14 },
+ /* Global Gain */
+ { 0xa1, 0x40, 0x0e, 0x0e, 0x00, 0x00, 0x00, 0x14 },
+ /* Contrast */
+ { 0xa1, 0x40, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x14 },
+ /* H&V synchro polarity */
+ { 0xa1, 0x40, 0x10, 0x06, 0x00, 0x00, 0x00, 0x14 },
+ /* ?default */
+ { 0xa1, 0x40, 0x11, 0x06, 0x00, 0x00, 0x00, 0x14 },
+ /* DAC scale */
+ { 0xa1, 0x40, 0x12, 0x06, 0x00, 0x00, 0x00, 0x14 },
+ /* ?default */
+ { 0xa1, 0x40, 0x14, 0x02, 0x00, 0x00, 0x00, 0x14 },
+ /* Validate Settings */
+ { 0xa1, 0x40, 0x13, 0x01, 0x00, 0x00, 0x00, 0x14 },
};
+
static const __u8 initPas202[] = {
0x44, 0x44, 0x21, 0x30, 0x00, 0x00, 0x00, 0x80, 0x40, 0x00, 0x00, 0x00,
0x00, 0x00,
- 0x00, 0x00, 0x00, 0x07, 0x03, 0x0a, /* 6 */
- 0x28, 0x1e, 0x28, 0x89, 0x30,
+ 0x00, 0x00, 0x00, 0x06, 0x03, 0x0a,
+ 0x28, 0x1e, 0x28, 0x89, 0x20,
0x00, 0x00, 0x02, 0x03, 0x0f, 0x0c
};
static const __u8 pas202_sensor_init[][8] = {
static const __u8 initTas5110[] = {
0x44, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x11, 0x00, 0x00, 0x00,
0x00, 0x00,
- 0x00, 0x01, 0x00, 0x46, 0x09, 0x0a, /* shift from 0x45 0x09 0x0a */
+ 0x00, 0x01, 0x00, 0x45, 0x09, 0x0a,
0x16, 0x12, 0x60, 0x86, 0x2b,
0x14, 0x0a, 0x02, 0x02, 0x09, 0x07
};
static const __u8 initTas5130[] = {
0x04, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x11, 0x00, 0x00, 0x00,
0x00, 0x00,
- 0x00, 0x01, 0x00, 0x69, 0x0c, 0x0a,
+ 0x00, 0x01, 0x00, 0x68, 0x0c, 0x0a,
0x28, 0x1e, 0x60, COMP, MCK_INIT,
0x18, 0x10, 0x04, 0x03, 0x11, 0x0c
};
{0x30, 0x11, 0x02, 0x20, 0x70, 0x00, 0x00, 0x10},
};
+struct sensor_data sensor_data[] = {
+SENS(initHv7131, NULL, hv7131_sensor_init, NULL, NULL, 0, NO_EXPO|NO_FREQ, 0),
+SENS(initOv6650, NULL, ov6650_sensor_init, NULL, NULL, F_GAIN|F_SIF, 0, 0x60),
+SENS(initOv7630, initOv7630_3, ov7630_sensor_init, NULL, ov7630_sensor_init_3,
+ F_GAIN, 0, 0x21),
+SENS(initPas106, NULL, pas106_sensor_init, NULL, NULL, F_SIF, NO_EXPO|NO_FREQ,
+ 0),
+SENS(initPas202, initPas202, pas202_sensor_init, NULL, NULL, 0,
+ NO_EXPO|NO_FREQ, 0),
+SENS(initTas5110, NULL, tas5110_sensor_init, NULL, NULL, F_GAIN|F_SIF,
+ NO_BRIGHTNESS|NO_FREQ, 0),
+SENS(initTas5130, NULL, tas5130_sensor_init, NULL, NULL, 0, NO_EXPO|NO_FREQ,
+ 0),
+};
+
/* get one byte in gspca_dev->usb_buf */
static void reg_r(struct gspca_dev *gspca_dev,
__u16 value)
int len)
{
#ifdef GSPCA_DEBUG
- if (len > sizeof gspca_dev->usb_buf) {
+ if (len > USB_BUF_SZ) {
PDEBUG(D_ERR|D_PACK, "reg_w: buffer overflow");
return;
}
500);
}
-static void reg_w_big(struct gspca_dev *gspca_dev,
- __u16 value,
- const __u8 *buffer,
- int len)
-{
- __u8 *tmpbuf;
-
- tmpbuf = kmalloc(len, GFP_KERNEL);
- memcpy(tmpbuf, buffer, len);
- usb_control_msg(gspca_dev->dev,
- usb_sndctrlpipe(gspca_dev->dev, 0),
- 0x08, /* request */
- USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
- value,
- 0, /* index */
- tmpbuf, len,
- 500);
- kfree(tmpbuf);
-}
-
static int i2c_w(struct gspca_dev *gspca_dev, const __u8 *buffer)
{
int retry = 60;
{0xa0, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00, 0x10};
/* change reg 0x06 */
- i2cOV[1] = sd->sensor_addr;
+ i2cOV[1] = sensor_data[sd->sensor].sensor_addr;
i2cOV[3] = sd->brightness;
if (i2c_w(gspca_dev, i2cOV) < 0)
goto err;
goto err;
break;
}
- case SENSOR_TAS5110:
- /* FIXME figure out howto control brightness on TAS5110 */
- break;
}
return;
err:
case SENSOR_OV7630: {
__u8 i2c[] = {0xa0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10};
- i2c[1] = sd->sensor_addr;
+ i2c[1] = sensor_data[sd->sensor].sensor_addr;
i2c[3] = gain >> 2;
if (i2c_w(gspca_dev, i2c) < 0)
goto err;
rgb_value = gain;
reg_w(gspca_dev, 0x11, &rgb_value, 1);
- if (sd->sensor_has_gain)
+ if (sensor_data[sd->sensor].flags & F_GAIN)
setsensorgain(gspca_dev);
}
else if (reg11 > 16)
reg11 = 16;
+ /* In 640x480, if the reg11 has less than 3, the image is
+ unstable (not enough bandwidth). */
+ if (gspca_dev->width == 640 && reg11 < 3)
+ reg11 = 3;
+
/* frame exposure time in ms = 1000 * reg11 / 30 ->
reg10 = sd->exposure * 2 * reg10_max / (1000 * reg11 / 30) */
reg10 = (sd->exposure * 60 * reg10_max) / (1000 * reg11);
else if (reg10 > reg10_max)
reg10 = reg10_max;
- /* In 640x480, if the reg11 has less than 3, the image is
- unstable (not enough bandwidth). */
- if (gspca_dev->width == 640 && reg11 < 3)
- reg11 = 3;
-
/* Write reg 10 and reg11 low nibble */
- i2c[1] = sd->sensor_addr;
+ i2c[1] = sensor_data[sd->sensor].sensor_addr;
i2c[3] = reg10;
i2c[4] |= reg11 - 1;
? 0x4f : 0x8a;
break;
}
- i2c[1] = sd->sensor_addr;
+ i2c[1] = sensor_data[sd->sensor].sensor_addr;
if (i2c_w(gspca_dev, i2c) < 0)
PDEBUG(D_ERR, "i2c error setfreq");
break;
{
struct sd *sd = (struct sd *) gspca_dev;
struct cam *cam;
- int sif = 0;
- /* nctrls depends upon the sensor, so we use a per cam copy */
- memcpy(&sd->sd_desc, gspca_dev->sd_desc, sizeof(struct sd_desc));
- gspca_dev->sd_desc = &sd->sd_desc;
+ reg_r(gspca_dev, 0x00);
+ if (gspca_dev->usb_buf[0] != 0x10)
+ return -ENODEV;
/* copy the webcam info from the device id */
- sd->sensor = (id->driver_info >> 24) & 0xff;
- if (id->driver_info & (F_GAIN << 16))
- sd->sensor_has_gain = 1;
- if (id->driver_info & (F_AUTO << 16))
- sd->sd_desc.dq_callback = do_autogain;
- if (id->driver_info & (F_SIF << 16))
- sif = 1;
- if (id->driver_info & (F_H18 << 16))
- sd->fr_h_sz = 18; /* size of frame header */
- else
- sd->fr_h_sz = 12;
- sd->sd_desc.nctrls = (id->driver_info >> 8) & 0xff;
- sd->sensor_addr = id->driver_info & 0xff;
+ sd->sensor = id->driver_info >> 8;
+ sd->bridge = id->driver_info & 0xff;
+ gspca_dev->ctrl_dis = sensor_data[sd->sensor].ctrl_dis;
cam = &gspca_dev->cam;
cam->epaddr = 0x01;
- if (!sif) {
+ if (!(sensor_data[sd->sensor].flags & F_SIF)) {
cam->cam_mode = vga_mode;
cam->nmodes = ARRAY_SIZE(vga_mode);
} else {
sd->brightness = BRIGHTNESS_DEF;
sd->gain = GAIN_DEF;
sd->exposure = EXPOSURE_DEF;
- sd->autogain = AUTOGAIN_DEF;
+ if (gspca_dev->ctrl_dis & (1 << AUTOGAIN_IDX))
+ sd->autogain = 0; /* Disable do_autogain callback */
+ else
+ sd->autogain = AUTOGAIN_DEF;
sd->freq = FREQ_DEF;
return 0;
}
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
{
- reg_r(gspca_dev, 0x00);
- if (gspca_dev->usb_buf[0] != 0x10)
- return -ENODEV;
- return 0;
-}
+ const __u8 stop = 0x09; /* Disable stream turn of LED */
-static void pas106_i2cinit(struct gspca_dev *gspca_dev)
-{
- int i;
- const __u8 *data;
- __u8 i2c1[] = { 0xa1, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x14 };
-
- i = ARRAY_SIZE(pas106_data);
- data = pas106_data[0];
- while (--i >= 0) {
- memcpy(&i2c1[2], data, 2);
- /* copy 2 bytes from the template */
- if (i2c_w(gspca_dev, i2c1) < 0)
- PDEBUG(D_ERR, "i2c error pas106");
- data += 2;
- }
+ reg_w(gspca_dev, 0x01, &stop, 1);
+
+ return 0;
}
/* -- start the camera -- */
static void sd_start(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
- int mode, l = 0x1f;
+ struct cam *cam = &gspca_dev->cam;
+ int mode, l;
const __u8 *sn9c10x;
- __u8 reg17_19[3];
-
- mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv;
+ __u8 reg12_19[8];
+
+ mode = cam->cam_mode[gspca_dev->curr_mode].priv & 0x07;
+ sn9c10x = sensor_data[sd->sensor].bridge_init[sd->bridge];
+ l = sensor_data[sd->sensor].bridge_init_size[sd->bridge];
+ memcpy(reg12_19, &sn9c10x[0x12 - 1], 8);
+ reg12_19[6] = sn9c10x[0x18 - 1] | (mode << 4);
+ /* Special cases where reg 17 and or 19 value depends on mode */
switch (sd->sensor) {
- case SENSOR_HV7131R:
- sn9c10x = initHv7131;
- reg17_19[0] = 0x60;
- reg17_19[1] = (mode << 4) | 0x8a;
- reg17_19[2] = 0x20;
- break;
- case SENSOR_OV6650:
- sn9c10x = initOv6650;
- reg17_19[0] = 0x68;
- reg17_19[1] = (mode << 4) | 0x8b;
- reg17_19[2] = 0x20;
- break;
- case SENSOR_OV7630:
- if (sd->fr_h_sz == 18) { /* SN9C103 */
- sn9c10x = initOv7630_3;
- l = sizeof initOv7630_3;
- } else
- sn9c10x = initOv7630;
- reg17_19[0] = 0x68;
- reg17_19[1] = (mode << 4) | COMP2;
- reg17_19[2] = MCK_INIT1;
- break;
- case SENSOR_PAS106:
- sn9c10x = initPas106;
- reg17_19[0] = 0x24; /* 0x28 */
- reg17_19[1] = (mode << 4) | COMP1;
- reg17_19[2] = MCK_INIT1;
- break;
case SENSOR_PAS202:
- sn9c10x = initPas202;
- reg17_19[0] = mode ? 0x24 : 0x20;
- reg17_19[1] = (mode << 4) | 0x89;
- reg17_19[2] = 0x20;
+ reg12_19[5] = mode ? 0x24 : 0x20;
break;
- case SENSOR_TAS5110:
- sn9c10x = initTas5110;
- reg17_19[0] = 0x60;
- reg17_19[1] = (mode << 4) | 0x86;
- reg17_19[2] = 0x2b; /* 0xf3; */
- break;
- default:
-/* case SENSOR_TAS5130CXX: */
- sn9c10x = initTas5130;
- reg17_19[0] = 0x60;
- reg17_19[1] = (mode << 4) | COMP;
- reg17_19[2] = mode ? 0x23 : 0x43;
+ case SENSOR_TAS5130CXX:
+ /* probably not mode specific at all most likely the upper
+ nibble of 0x19 is exposure (clock divider) just as with
+ the tas5110, we need someone to test this. */
+ reg12_19[7] = mode ? 0x23 : 0x43;
break;
}
+ /* Disable compression when the raw bayer format has been selected */
+ if (cam->cam_mode[gspca_dev->curr_mode].priv & MODE_RAW)
+ reg12_19[6] &= ~0x80;
+
+ /* Vga mode emulation on SIF sensor? */
+ if (cam->cam_mode[gspca_dev->curr_mode].priv & MODE_REDUCED_SIF) {
+ reg12_19[0] += 16; /* 0x12: hstart adjust */
+ reg12_19[1] += 24; /* 0x13: vstart adjust */
+ reg12_19[3] = 320 / 16; /* 0x15: hsize */
+ reg12_19[4] = 240 / 16; /* 0x16: vsize */
+ }
/* reg 0x01 bit 2 video transfert on */
reg_w(gspca_dev, 0x01, &sn9c10x[0x01 - 1], 1);
/* reg 0x17 SensorClk enable inv Clk 0x60 */
reg_w(gspca_dev, 0x17, &sn9c10x[0x17 - 1], 1);
/* Set the registers from the template */
- reg_w_big(gspca_dev, 0x01, sn9c10x, l);
- switch (sd->sensor) {
- case SENSOR_HV7131R:
- i2c_w_vector(gspca_dev, hv7131_sensor_init,
- sizeof hv7131_sensor_init);
- break;
- case SENSOR_OV6650:
- i2c_w_vector(gspca_dev, ov6650_sensor_init,
- sizeof ov6650_sensor_init);
- break;
- case SENSOR_OV7630:
- i2c_w_vector(gspca_dev, ov7630_sensor_init,
- sizeof ov7630_sensor_init);
- if (sd->fr_h_sz == 18) { /* SN9C103 */
- const __u8 i2c[] = { 0xa0, 0x21, 0x13, 0x80, 0x00,
- 0x00, 0x00, 0x10 };
- i2c_w(gspca_dev, i2c);
- }
- break;
- case SENSOR_PAS106:
- pas106_i2cinit(gspca_dev);
- break;
- case SENSOR_PAS202:
- i2c_w_vector(gspca_dev, pas202_sensor_init,
- sizeof pas202_sensor_init);
- break;
- case SENSOR_TAS5110:
- i2c_w_vector(gspca_dev, tas5110_sensor_init,
- sizeof tas5110_sensor_init);
- break;
- default:
-/* case SENSOR_TAS5130CXX: */
- i2c_w_vector(gspca_dev, tas5130_sensor_init,
- sizeof tas5130_sensor_init);
- break;
- }
+ reg_w(gspca_dev, 0x01, sn9c10x, l);
+
+ /* Init the sensor */
+ i2c_w_vector(gspca_dev, sensor_data[sd->sensor].sensor_init,
+ sensor_data[sd->sensor].sensor_init_size);
+ if (sensor_data[sd->sensor].sensor_bridge_init[sd->bridge])
+ i2c_w_vector(gspca_dev,
+ sensor_data[sd->sensor].sensor_bridge_init[sd->bridge],
+ sensor_data[sd->sensor].sensor_bridge_init_size[
+ sd->bridge]);
+
/* H_size V_size 0x28, 0x1e -> 640x480. 0x16, 0x12 -> 352x288 */
- reg_w(gspca_dev, 0x15, &sn9c10x[0x15 - 1], 2);
+ reg_w(gspca_dev, 0x15, ®12_19[3], 2);
/* compression register */
- reg_w(gspca_dev, 0x18, ®17_19[1], 1);
+ reg_w(gspca_dev, 0x18, ®12_19[6], 1);
/* H_start */
- reg_w(gspca_dev, 0x12, &sn9c10x[0x12 - 1], 1);
+ reg_w(gspca_dev, 0x12, ®12_19[0], 1);
/* V_START */
- reg_w(gspca_dev, 0x13, &sn9c10x[0x13 - 1], 1);
+ reg_w(gspca_dev, 0x13, ®12_19[1], 1);
/* reset 0x17 SensorClk enable inv Clk 0x60 */
/*fixme: ov7630 [17]=68 8f (+20 if 102)*/
- reg_w(gspca_dev, 0x17, ®17_19[0], 1);
+ reg_w(gspca_dev, 0x17, ®12_19[5], 1);
/*MCKSIZE ->3 */ /*fixme: not ov7630*/
- reg_w(gspca_dev, 0x19, ®17_19[2], 1);
+ reg_w(gspca_dev, 0x19, ®12_19[7], 1);
/* AE_STRX AE_STRY AE_ENDX AE_ENDY */
reg_w(gspca_dev, 0x1c, &sn9c10x[0x1c - 1], 4);
/* Enable video transfert */
reg_w(gspca_dev, 0x01, &sn9c10x[0], 1);
/* Compression */
- reg_w(gspca_dev, 0x18, ®17_19[1], 2);
+ reg_w(gspca_dev, 0x18, ®12_19[6], 2);
msleep(20);
sd->reg11 = -1;
static void sd_stopN(struct gspca_dev *gspca_dev)
{
- __u8 ByteSend;
-
- ByteSend = 0x09; /* 0X00 */
- reg_w(gspca_dev, 0x01, &ByteSend, 1);
-}
-
-static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-}
-
-static void sd_close(struct gspca_dev *gspca_dev)
-{
+ sd_init(gspca_dev);
}
static void sd_pkt_scan(struct gspca_dev *gspca_dev,
{
int i;
struct sd *sd = (struct sd *) gspca_dev;
+ struct cam *cam = &gspca_dev->cam;
/* frames start with:
* ff ff 00 c4 c4 96 synchro
&& data[5 + i] == 0x96) { /* start of frame */
int lum = -1;
int pkt_type = LAST_PACKET;
+ int fr_h_sz = (sd->bridge == BRIDGE_103) ?
+ 18 : 12;
- if (len - i < sd->fr_h_sz) {
+ if (len - i < fr_h_sz) {
PDEBUG(D_STREAM, "packet too short to"
" get avg brightness");
- } else if (sd->fr_h_sz == 12) {
- lum = data[i + 8] + (data[i + 9] << 8);
- } else {
+ } else if (sd->bridge == BRIDGE_103) {
lum = data[i + 9] +
(data[i + 10] << 8);
+ } else {
+ lum = data[i + 8] + (data[i + 9] << 8);
}
- if (lum == 0) {
+ /* When exposure changes midway a frame we
+ get a lum of 0 in this case drop 2 frames
+ as the frames directly after an exposure
+ change have an unstable image. Sometimes lum
+ *really* is 0 (cam used in low light with
+ low exposure setting), so do not drop frames
+ if the previous lum was 0 too. */
+ if (lum == 0 && sd->prev_avg_lum != 0) {
lum = -1;
sd->frames_to_drop = 2;
- }
+ sd->prev_avg_lum = 0;
+ } else
+ sd->prev_avg_lum = lum;
atomic_set(&sd->avg_lum, lum);
if (sd->frames_to_drop) {
frame = gspca_frame_add(gspca_dev, pkt_type,
frame, data, 0);
- data += i + sd->fr_h_sz;
- len -= i + sd->fr_h_sz;
+ data += i + fr_h_sz;
+ len -= i + fr_h_sz;
gspca_frame_add(gspca_dev, FIRST_PACKET,
frame, data, len);
return;
}
}
}
+
+ if (cam->cam_mode[gspca_dev->curr_mode].priv & MODE_RAW) {
+ /* In raw mode we sometimes get some garbage after the frame
+ ignore this */
+ int used = frame->data_end - frame->data;
+ int size = cam->cam_mode[gspca_dev->curr_mode].sizeimage;
+
+ if (used + len > size)
+ len = size - used;
+ }
+
gspca_frame_add(gspca_dev, INTER_PACKET,
frame, data, len);
}
.ctrls = sd_ctrls,
.nctrls = ARRAY_SIZE(sd_ctrls),
.config = sd_config,
- .open = sd_open,
+ .init = sd_init,
.start = sd_start,
.stopN = sd_stopN,
- .stop0 = sd_stop0,
- .close = sd_close,
.pkt_scan = sd_pkt_scan,
.querymenu = sd_querymenu,
+ .dq_callback = do_autogain,
};
/* -- module initialisation -- */
-#define SFCI(sensor, flags, nctrls, i2c_addr) \
- .driver_info = (SENSOR_ ## sensor << 24) \
- | ((flags) << 16) \
- | ((nctrls) << 8) \
- | (i2c_addr)
+#define SB(sensor, bridge) \
+ .driver_info = (SENSOR_ ## sensor << 8) | BRIDGE_ ## bridge
+
+
static __devinitdata struct usb_device_id device_table[] = {
-#ifndef CONFIG_USB_SN9C102
- {USB_DEVICE(0x0c45, 0x6001), /* SN9C102 */
- SFCI(TAS5110, F_GAIN|F_AUTO|F_SIF, 4, 0)},
- {USB_DEVICE(0x0c45, 0x6005), /* SN9C101 */
- SFCI(TAS5110, F_GAIN|F_AUTO|F_SIF, 4, 0)},
- {USB_DEVICE(0x0c45, 0x6007), /* SN9C101 */
- SFCI(TAS5110, F_GAIN|F_AUTO|F_SIF, 4, 0)},
- {USB_DEVICE(0x0c45, 0x6009), /* SN9C101 */
- SFCI(PAS106, F_SIF, 2, 0)},
- {USB_DEVICE(0x0c45, 0x600d), /* SN9C101 */
- SFCI(PAS106, F_SIF, 2, 0)},
+ {USB_DEVICE(0x0c45, 0x6001), SB(TAS5110, 102)}, /* TAS5110C1B */
+ {USB_DEVICE(0x0c45, 0x6005), SB(TAS5110, 101)}, /* TAS5110C1B */
+#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
+ {USB_DEVICE(0x0c45, 0x6007), SB(TAS5110, 101)}, /* TAS5110D */
+ {USB_DEVICE(0x0c45, 0x6009), SB(PAS106, 101)},
+ {USB_DEVICE(0x0c45, 0x600d), SB(PAS106, 101)},
#endif
- {USB_DEVICE(0x0c45, 0x6011), /* SN9C101 - SN9C101G */
- SFCI(OV6650, F_GAIN|F_AUTO|F_SIF, 5, 0x60)},
-#ifndef CONFIG_USB_SN9C102
- {USB_DEVICE(0x0c45, 0x6019), /* SN9C101 */
- SFCI(OV7630, F_GAIN|F_AUTO, 5, 0x21)},
- {USB_DEVICE(0x0c45, 0x6024), /* SN9C102 */
- SFCI(TAS5130CXX, 0, 2, 0)},
- {USB_DEVICE(0x0c45, 0x6025), /* SN9C102 */
- SFCI(TAS5130CXX, 0, 2, 0)},
- {USB_DEVICE(0x0c45, 0x6028), /* SN9C102 */
- SFCI(PAS202, 0, 2, 0)},
- {USB_DEVICE(0x0c45, 0x6029), /* SN9C101 */
- SFCI(PAS106, F_SIF, 2, 0)},
- {USB_DEVICE(0x0c45, 0x602c), /* SN9C102 */
- SFCI(OV7630, F_GAIN|F_AUTO, 5, 0x21)},
- {USB_DEVICE(0x0c45, 0x602d), /* SN9C102 */
- SFCI(HV7131R, 0, 2, 0)},
- {USB_DEVICE(0x0c45, 0x602e), /* SN9C102 */
- SFCI(OV7630, F_GAIN|F_AUTO, 5, 0x21)},
- {USB_DEVICE(0x0c45, 0x60af), /* SN9C103 */
- SFCI(PAS202, F_H18, 2, 0)},
- {USB_DEVICE(0x0c45, 0x60b0), /* SN9C103 */
- SFCI(OV7630, F_GAIN|F_AUTO|F_H18, 5, 0x21)},
+ {USB_DEVICE(0x0c45, 0x6011), SB(OV6650, 101)},
+#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
+ {USB_DEVICE(0x0c45, 0x6019), SB(OV7630, 101)},
+ {USB_DEVICE(0x0c45, 0x6024), SB(TAS5130CXX, 102)},
+ {USB_DEVICE(0x0c45, 0x6025), SB(TAS5130CXX, 102)},
+ {USB_DEVICE(0x0c45, 0x6028), SB(PAS202, 102)},
+ {USB_DEVICE(0x0c45, 0x6029), SB(PAS106, 102)},
+ {USB_DEVICE(0x0c45, 0x602c), SB(OV7630, 102)},
#endif
+ {USB_DEVICE(0x0c45, 0x602d), SB(HV7131R, 102)},
+#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
+ {USB_DEVICE(0x0c45, 0x602e), SB(OV7630, 102)},
+#endif
+ {USB_DEVICE(0x0c45, 0x608f), SB(OV7630, 103)},
+#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
+ {USB_DEVICE(0x0c45, 0x60af), SB(PAS202, 103)},
+#endif
+ {USB_DEVICE(0x0c45, 0x60b0), SB(OV7630, 103)},
{}
};
MODULE_DEVICE_TABLE(usb, device_table);
.id_table = device_table,
.probe = sd_probe,
.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+ .suspend = gspca_suspend,
+ .resume = gspca_resume,
+#endif
};
/* -- module insert / remove -- */
#define SENSOR_HV7131R 0
#define SENSOR_MI0360 1
#define SENSOR_MO4000 2
-#define SENSOR_OV7648 3
-#define SENSOR_OV7660 4
+#define SENSOR_OM6802 3
+#define SENSOR_OV7630 4
+#define SENSOR_OV7648 5
+#define SENSOR_OV7660 6
unsigned char i2c_base;
};
.type = V4L2_CTRL_TYPE_INTEGER,
.name = "Brightness",
.minimum = 0,
- .maximum = 0xffff,
+#define BRIGHTNESS_MAX 0xffff
+ .maximum = BRIGHTNESS_MAX,
.step = 1,
#define BRIGHTNESS_DEF 0x7fff
.default_value = BRIGHTNESS_DEF,
.type = V4L2_CTRL_TYPE_INTEGER,
.name = "Contrast",
.minimum = 0,
- .maximum = 127,
+#define CONTRAST_MAX 127
+ .maximum = CONTRAST_MAX,
.step = 1,
#define CONTRAST_DEF 63
.default_value = CONTRAST_DEF,
.type = V4L2_CTRL_TYPE_INTEGER,
.name = "Color",
.minimum = 0,
- .maximum = 255,
+ .maximum = 64,
.step = 1,
-#define COLOR_DEF 127
+#define COLOR_DEF 32
.default_value = COLOR_DEF,
},
.set = sd_setcolors,
.get = sd_getcolors,
},
+#define AUTOGAIN_IDX 3
{
{
.id = V4L2_CID_AUTOGAIN,
static struct v4l2_pix_format vga_mode[] = {
{160, 120, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
.bytesperline = 160,
- .sizeimage = 160 * 120 * 3 / 8 + 590,
+ .sizeimage = 160 * 120 * 4 / 8 + 590,
.colorspace = V4L2_COLORSPACE_JPEG,
.priv = 2},
{320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
+static const __u8 sn_om6802[] = {
+/* reg0 reg1 reg2 reg3 reg4 reg5 reg6 reg7 */
+ 0x00, 0x23, 0x72, 0x00, 0x1a, 0x34, 0x27, 0x20,
+/* reg8 reg9 rega regb regc regd rege regf */
+ 0x80, 0x34, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+/* reg10 reg11 reg12 reg13 reg14 reg15 reg16 reg17 */
+ 0x03, 0x00, 0x51, 0x01, 0x00, 0x28, 0x1e, 0x40,
+/* reg18 reg19 reg1a reg1b reg1c reg1d reg1e reg1f */
+ 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x08, 0x22, 0x44, 0x63, 0x7d, 0x92, 0xa3, 0xaf,
+ 0xbc, 0xc4, 0xcd, 0xd5, 0xdc, 0xe1, 0xe8, 0xef,
+ 0xf7
+};
+
+static const __u8 sn_ov7630[] = {
+/* reg0 reg1 reg2 reg3 reg4 reg5 reg6 reg7 */
+ 0x00, 0x21, 0x40, 0x00, 0x1a, 0x20, 0x1f, 0x20,
+/* reg8 reg9 rega regb regc regd rege regf */
+ 0xa1, 0x21, 0x76, 0x21, 0x00, 0x00, 0x00, 0x10,
+/* reg10 reg11 reg12 reg13 reg14 reg15 reg16 reg17 */
+ 0x03, 0x00, 0x04, 0x01, 0x0a, 0x28, 0x1e, 0xc2,
+/* reg18 reg19 reg1a reg1b reg1c reg1d reg1e reg1f */
+ 0x0b, 0x00, 0x00, 0x00, 0x00, 0x00
+};
+
static const __u8 sn_ov7648[] = {
/* reg0 reg1 reg2 reg3 reg4 reg5 reg6 reg7 */
0x00, 0x21, 0x62, 0x00, 0x1a, 0x20, 0x20, 0x20,
sn_hv7131,
sn_mi0360,
sn_mo4000,
+ sn_om6802,
+ sn_ov7630,
sn_ov7648,
sn_ov7660
};
-static const __u8 regsn20[] = {
+static const __u8 gamma_def[] = {
0x00, 0x2d, 0x46, 0x5a, 0x6c, 0x7c, 0x8b, 0x99,
0xa6, 0xb2, 0xbf, 0xca, 0xd5, 0xe0, 0xeb, 0xf5, 0xff
};
-static const __u8 regsn20_sn9c325[] = {
- 0x0a, 0x3a, 0x56, 0x6c, 0x7e, 0x8d, 0x9a, 0xa4,
- 0xaf, 0xbb, 0xc5, 0xcd, 0xd5, 0xde, 0xe8, 0xed, 0xf5
-};
static const __u8 reg84[] = {
0x14, 0x00, 0x27, 0x00, 0x07, 0x00, 0xe5, 0x0f,
0xe4, 0x0f, 0x38, 0x00, 0x3e, 0x00, 0xc3, 0x0f,
-/* 0x00, 0x00, 0x00, 0x00, 0x00 */
- 0xf7, 0x0f, 0x0a, 0x00, 0x00
-};
-static const __u8 reg84_sn9c325[] = {
- 0x14, 0x00, 0x27, 0x00, 0x07, 0x00, 0xe4, 0x0f,
- 0xd3, 0x0f, 0x4b, 0x00, 0x48, 0x00, 0xc0, 0x0f,
- 0xf8, 0x0f, 0x00, 0x00, 0x00
+ 0xf7, 0x0f, 0x00, 0x00, 0x00
};
-
static const __u8 hv7131r_sensor_init[][8] = {
{0xC1, 0x11, 0x01, 0x08, 0x01, 0x00, 0x00, 0x10},
{0xB1, 0x11, 0x34, 0x17, 0x7F, 0x00, 0x00, 0x10},
{0xa1, 0x21, 0x11, 0x38, 0x00, 0x00, 0x00, 0x10},
{}
};
+static __u8 om6802_sensor_init[][8] = {
+ {0xa0, 0x34, 0x90, 0x05, 0x00, 0x00, 0x00, 0x10},
+ {0xa0, 0x34, 0x49, 0x85, 0x00, 0x00, 0x00, 0x10},
+ {0xa0, 0x34, 0x5a, 0xc0, 0x00, 0x00, 0x00, 0x10},
+ {0xa0, 0x34, 0xdd, 0x18, 0x00, 0x00, 0x00, 0x10},
+/* {0xa0, 0x34, 0xfb, 0x11, 0x00, 0x00, 0x00, 0x10}, */
+ {0xa0, 0x34, 0xf0, 0x04, 0x00, 0x00, 0x00, 0x10},
+ /* white balance & auto-exposure */
+/* {0xa0, 0x34, 0xf1, 0x02, 0x00, 0x00, 0x00, 0x10},
+ * set color mode */
+/* {0xa0, 0x34, 0xfe, 0x5b, 0x00, 0x00, 0x00, 0x10},
+ * max AGC value in AE */
+/* {0xa0, 0x34, 0xe5, 0x00, 0x00, 0x00, 0x00, 0x10},
+ * preset AGC */
+/* {0xa0, 0x34, 0xe6, 0x00, 0x00, 0x00, 0x00, 0x10},
+ * preset brightness */
+/* {0xa0, 0x34, 0xe7, 0x00, 0x00, 0x00, 0x00, 0x10},
+ * preset contrast */
+/* {0xa0, 0x34, 0xe8, 0x31, 0x00, 0x00, 0x00, 0x10},
+ * preset gamma */
+ {0xa0, 0x34, 0xe9, 0x0f, 0x00, 0x00, 0x00, 0x10},
+ /* luminance mode (0x4f = AE) */
+ {0xa0, 0x34, 0xe4, 0xff, 0x00, 0x00, 0x00, 0x10},
+ /* preset shutter */
+/* {0xa0, 0x34, 0xef, 0x00, 0x00, 0x00, 0x00, 0x10},
+ * auto frame rate */
+/* {0xa0, 0x34, 0xfb, 0xee, 0x00, 0x00, 0x00, 0x10}, */
+
+/* {0xa0, 0x34, 0x71, 0x84, 0x00, 0x00, 0x00, 0x10}, */
+/* {0xa0, 0x34, 0x72, 0x05, 0x00, 0x00, 0x00, 0x10}, */
+/* {0xa0, 0x34, 0x68, 0x80, 0x00, 0x00, 0x00, 0x10}, */
+/* {0xa0, 0x34, 0x69, 0x01, 0x00, 0x00, 0x00, 0x10}, */
+ {}
+};
+static const __u8 ov7630_sensor_init[][8] = {
+ {0xa1, 0x21, 0x76, 0x01, 0x00, 0x00, 0x00, 0x10},
+ {0xa1, 0x21, 0x12, 0xc8, 0x00, 0x00, 0x00, 0x10},
+/* win: delay 20ms */
+ {0xa1, 0x21, 0x12, 0x48, 0x00, 0x00, 0x00, 0x10},
+ {0xa1, 0x21, 0x12, 0xc8, 0x00, 0x00, 0x00, 0x10},
+/* win: delay 20ms */
+ {0xa1, 0x21, 0x12, 0x48, 0x00, 0x00, 0x00, 0x10},
+/* win: i2c_r from 00 to 80 */
+ {0xd1, 0x21, 0x03, 0x80, 0x10, 0x20, 0x80, 0x10},
+ {0xb1, 0x21, 0x0c, 0x20, 0x20, 0x00, 0x00, 0x10},
+ {0xd1, 0x21, 0x11, 0x00, 0x48, 0xc0, 0x00, 0x10},
+ {0xb1, 0x21, 0x15, 0x80, 0x03, 0x00, 0x00, 0x10},
+ {0xd1, 0x21, 0x17, 0x1b, 0xbd, 0x05, 0xf6, 0x10},
+ {0xa1, 0x21, 0x1b, 0x04, 0x00, 0x00, 0x00, 0x10},
+ {0xd1, 0x21, 0x1f, 0x00, 0x80, 0x80, 0x80, 0x10},
+ {0xd1, 0x21, 0x23, 0xde, 0x10, 0x8a, 0xa0, 0x10},
+ {0xc1, 0x21, 0x27, 0xca, 0xa2, 0x74, 0x00, 0x10},
+ {0xd1, 0x21, 0x2a, 0x88, 0x00, 0x88, 0x01, 0x10},
+ {0xc1, 0x21, 0x2e, 0x80, 0x00, 0x18, 0x00, 0x10},
+ {0xa1, 0x21, 0x21, 0x08, 0x00, 0x00, 0x00, 0x10},
+ {0xa1, 0x21, 0x22, 0x00, 0x00, 0x00, 0x00, 0x10},
+ {0xa1, 0x21, 0x2e, 0x00, 0x00, 0x00, 0x00, 0x10},
+ {0xb1, 0x21, 0x32, 0xc2, 0x08, 0x00, 0x00, 0x10},
+ {0xb1, 0x21, 0x4c, 0x00, 0x00, 0x00, 0x00, 0x10},
+ {0xd1, 0x21, 0x60, 0x05, 0x40, 0x12, 0x57, 0x10},
+ {0xa1, 0x21, 0x64, 0x73, 0x00, 0x00, 0x00, 0x10},
+ {0xd1, 0x21, 0x65, 0x00, 0x55, 0x01, 0xac, 0x10},
+ {0xa1, 0x21, 0x69, 0x38, 0x00, 0x00, 0x00, 0x10},
+ {0xd1, 0x21, 0x6f, 0x1f, 0x01, 0x00, 0x10, 0x10},
+ {0xd1, 0x21, 0x73, 0x50, 0x20, 0x02, 0x01, 0x10},
+ {0xd1, 0x21, 0x77, 0xf3, 0x90, 0x98, 0x98, 0x10},
+ {0xc1, 0x21, 0x7b, 0x00, 0x4c, 0xf7, 0x00, 0x10},
+ {0xd1, 0x21, 0x17, 0x1b, 0xbd, 0x05, 0xf6, 0x10},
+ {0xa1, 0x21, 0x1b, 0x04, 0x00, 0x00, 0x00, 0x10},
+/* */
+ {0xa1, 0x21, 0x12, 0x48, 0x00, 0x00, 0x00, 0x10},
+ {0xa1, 0x21, 0x12, 0x48, 0x00, 0x00, 0x00, 0x10},
+/*fixme: + 0x12, 0x04*/
+ {0xa1, 0x21, 0x75, 0x82, 0x00, 0x00, 0x00, 0x10},
+ {0xa1, 0x21, 0x10, 0x32, 0x00, 0x00, 0x00, 0x10},
+ {0xa1, 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10},
+ {0xb1, 0x21, 0x01, 0x80, 0x80, 0x00, 0x00, 0x10},
+/* */
+ {0xa1, 0x21, 0x11, 0x00, 0x00, 0x00, 0x00, 0x10},
+ {0xa1, 0x21, 0x2a, 0x88, 0x00, 0x00, 0x00, 0x10},
+ {0xa1, 0x21, 0x2b, 0x34, 0x00, 0x00, 0x00, 0x10},
+/* */
+ {0xa1, 0x21, 0x10, 0x83, 0x00, 0x00, 0x00, 0x10},
+/* {0xb1, 0x21, 0x01, 0x88, 0x70, 0x00, 0x00, 0x10}, */
+ {}
+};
static const __u8 ov7660_sensor_init[][8] = {
{0xa1, 0x21, 0x12, 0x80, 0x00, 0x00, 0x00, 0x10}, /* reset SCCB */
/* (delay 20ms) */
0x29, 0x29, 0x29, 0x29
};
-/* read <len> bytes (len < sizeof gspca_dev->usb_buf) to gspca_dev->usb_buf */
+/* read <len> bytes to gspca_dev->usb_buf */
static void reg_r(struct gspca_dev *gspca_dev,
__u16 value, int len)
{
+#ifdef GSPCA_DEBUG
+ if (len > USB_BUF_SZ) {
+ err("reg_r: buffer overflow");
+ return;
+ }
+#endif
usb_control_msg(gspca_dev->dev,
usb_rcvctrlpipe(gspca_dev->dev, 0),
0,
{
PDEBUG(D_USBO, "reg_w [%02x] = %02x %02x ..",
value, buffer[0], buffer[1]);
- if (len <= sizeof gspca_dev->usb_buf) {
- memcpy(gspca_dev->usb_buf, buffer, len);
- usb_control_msg(gspca_dev->dev,
- usb_sndctrlpipe(gspca_dev->dev, 0),
- 0x08,
- USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
- value, 0,
- gspca_dev->usb_buf, len,
- 500);
- } else {
- __u8 *tmpbuf;
-
- tmpbuf = kmalloc(len, GFP_KERNEL);
- memcpy(tmpbuf, buffer, len);
- usb_control_msg(gspca_dev->dev,
- usb_sndctrlpipe(gspca_dev->dev, 0),
- 0x08,
- USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
- value, 0,
- tmpbuf, len,
- 500);
- kfree(tmpbuf);
+#ifdef GSPCA_DEBUG
+ if (len > USB_BUF_SZ) {
+ err("reg_w: buffer overflow");
+ return;
}
+#endif
+ memcpy(gspca_dev->usb_buf, buffer, len);
+ usb_control_msg(gspca_dev->dev,
+ usb_sndctrlpipe(gspca_dev->dev, 0),
+ 0x08,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
+ value, 0,
+ gspca_dev->usb_buf, len,
+ 500);
}
/* I2C write 1 byte */
static const __u8 regd4[] = {0x60, 0x00, 0x00};
reg_w1(gspca_dev, 0xf1, 0x00);
- reg_w1(gspca_dev, 0x01, 0x00); /*jfm was sn9c1xx[1] in v1*/
+ reg_w1(gspca_dev, 0x01, sn9c1xx[1]);
/* configure gpio */
reg_w(gspca_dev, 0x01, &sn9c1xx[1], 2);
reg_w(gspca_dev, 0x03, &sn9c1xx[3], 0x0f);
- switch (sd->bridge) {
- case BRIDGE_SN9C325:
+ switch (sd->sensor) {
+ case SENSOR_OM6802:
+ reg_w1(gspca_dev, 0x02, 0x71);
+ reg_w1(gspca_dev, 0x01, 0x42);
+ reg_w1(gspca_dev, 0x17, 0x64);
+ reg_w1(gspca_dev, 0x01, 0x42);
+ break;
+/*jfm: from win trace */
+ case SENSOR_OV7630:
+ reg_w1(gspca_dev, 0x01, 0x61);
+ reg_w1(gspca_dev, 0x17, 0xe2);
+ reg_w1(gspca_dev, 0x01, 0x60);
+ reg_w1(gspca_dev, 0x01, 0x40);
+ break;
+ case SENSOR_OV7648:
reg_w1(gspca_dev, 0x01, 0x43);
reg_w1(gspca_dev, 0x17, 0xae);
reg_w1(gspca_dev, 0x01, 0x42);
break;
+/*jfm: from win trace */
+ case SENSOR_OV7660:
+ reg_w1(gspca_dev, 0x01, 0x61);
+ reg_w1(gspca_dev, 0x17, 0x20);
+ reg_w1(gspca_dev, 0x01, 0x60);
+ reg_w1(gspca_dev, 0x01, 0x40);
+ break;
default:
reg_w1(gspca_dev, 0x01, 0x43);
reg_w1(gspca_dev, 0x17, 0x61);
reg_w1(gspca_dev, 0x01, 0x42);
- }
-
- if (sd->sensor == SENSOR_HV7131R) {
- if (probesensor(gspca_dev) < 0)
- return -ENODEV;
+ if (sd->sensor == SENSOR_HV7131R) {
+ if (probesensor(gspca_dev) < 0)
+ return -ENODEV;
+ }
+ break;
}
return 0;
}
}
}
+static void om6802_InitSensor(struct gspca_dev *gspca_dev)
+{
+ int i = 0;
+
+ while (om6802_sensor_init[i][0]) {
+ i2c_w8(gspca_dev, om6802_sensor_init[i]);
+ i++;
+ }
+}
+
+static void ov7630_InitSensor(struct gspca_dev *gspca_dev)
+{
+ int i = 0;
+
+ i2c_w8(gspca_dev, ov7630_sensor_init[i]); /* 76 01 */
+ i++;
+ i2c_w8(gspca_dev, ov7630_sensor_init[i]); /* 12 c8 (RGB+SRST) */
+ i++;
+ msleep(20);
+ i2c_w8(gspca_dev, ov7630_sensor_init[i]); /* 12 48 */
+ i++;
+ i2c_w8(gspca_dev, ov7630_sensor_init[i]); /* 12 c8 */
+ i++;
+ msleep(20);
+ i2c_w8(gspca_dev, ov7630_sensor_init[i]); /* 12 48 */
+ i++;
+/*jfm:win i2c_r from 00 to 80*/
+
+ while (ov7630_sensor_init[i][0]) {
+ i2c_w8(gspca_dev, ov7630_sensor_init[i]);
+ i++;
+ }
+}
+
static void ov7648_InitSensor(struct gspca_dev *gspca_dev)
{
int i = 0;
sd->autogain = AUTOGAIN_DEF;
sd->ag_cnt = -1;
+ switch (sd->sensor) {
+ case SENSOR_OV7630:
+ case SENSOR_OV7648:
+ case SENSOR_OV7660:
+ gspca_dev->ctrl_dis = (1 << AUTOGAIN_IDX);
+ break;
+ }
+
return 0;
}
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
/* const __u8 *sn9c1xx; */
| ((expoMo10[3] & 0x30) >> 4));
break;
}
+ case SENSOR_OM6802: {
+ __u8 gainOm[] =
+ { 0xa0, 0x34, 0xe5, 0x00, 0x00, 0x00, 0x00, 0x10 };
+
+ if (expo > 0x03ff)
+ expo = 0x03ff;
+ if (expo < 0x0001)
+ expo = 0x0001;
+ gainOm[3] = expo >> 2;
+ i2c_w8(gspca_dev, gainOm);
+ reg_w1(gspca_dev, 0x96, (expo >> 5) & 0x1f);
+ PDEBUG(D_CONF, "set exposure %d", gainOm[3]);
+ break;
+ }
}
return expo;
}
+/* this function is used for sensors o76xx only */
+static void setbrightcont(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ unsigned val;
+ __u8 reg84_full[0x15];
+
+ memset(reg84_full, 0, sizeof reg84_full);
+ val = sd->contrast * 0x20 / CONTRAST_MAX + 0x10; /* 10..30 */
+ reg84_full[2] = val;
+ reg84_full[0] = (val + 1) / 2;
+ reg84_full[4] = (val + 1) / 5;
+ if (val > BRIGHTNESS_DEF)
+ val = (sd->brightness - BRIGHTNESS_DEF) * 0x20
+ / BRIGHTNESS_MAX;
+ else
+ val = 0;
+ reg84_full[0x12] = val; /* 00..1f */
+ reg_w(gspca_dev, 0x84, reg84_full, sizeof reg84_full);
+}
+
+/* sensor != ov76xx */
static void setbrightness(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
unsigned int expo;
__u8 k2;
+ k2 = sd->brightness >> 10;
switch (sd->sensor) {
case SENSOR_HV7131R:
expo = sd->brightness << 4;
expo = sd->brightness >> 4;
sd->exposure = setexposure(gspca_dev, expo);
break;
+ case SENSOR_OM6802:
+ expo = sd->brightness >> 6;
+ sd->exposure = setexposure(gspca_dev, expo);
+ k2 = sd->brightness >> 11;
+ break;
}
- k2 = sd->brightness >> 10;
reg_w1(gspca_dev, 0x96, k2);
}
+/* sensor != ov76xx */
static void setcontrast(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
static void setcolors(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
- __u8 data;
- int colour;
+ __u8 blue, red;
- colour = sd->colors - 128;
- if (colour > 0)
- data = (colour + 32) & 0x7f; /* blue */
- else
- data = (-colour + 32) & 0x7f; /* red */
- reg_w1(gspca_dev, 0x05, data);
+ if (sd->colors >= 32) {
+ red = 32 + (sd->colors - 32) / 2;
+ blue = 64 - sd->colors;
+ } else {
+ red = sd->colors;
+ blue = 32 + (32 - sd->colors) / 2;
+ }
+ reg_w1(gspca_dev, 0x05, red);
+/* reg_w1(gspca_dev, 0x07, 32); */
+ reg_w1(gspca_dev, 0x06, blue);
}
static void setautogain(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
- switch (sd->sensor) {
- case SENSOR_HV7131R:
- case SENSOR_MO4000:
- case SENSOR_MI0360:
- if (sd->autogain)
- sd->ag_cnt = AG_CNT_START;
- else
- sd->ag_cnt = -1;
- break;
- }
+ if (gspca_dev->ctrl_dis & (1 << AUTOGAIN_IDX))
+ return;
+ if (sd->autogain)
+ sd->ag_cnt = AG_CNT_START;
+ else
+ sd->ag_cnt = -1;
}
/* -- start the camera -- */
static const __u8 C0[] = { 0x2d, 0x2d, 0x3a, 0x05, 0x04, 0x3f };
static const __u8 CA[] = { 0x28, 0xd8, 0x14, 0xec };
static const __u8 CE[] = { 0x32, 0xdd, 0x2d, 0xdd }; /* MI0360 */
- static const __u8 CE_sn9c325[] =
- { 0x32, 0xdd, 0x32, 0xdd }; /* OV7648 - SN9C325 */
+ static const __u8 CE_ov76xx[] =
+ { 0x32, 0xdd, 0x32, 0xdd }; /* OV7630/48 */
sn9c1xx = sn_tb[(int) sd->sensor];
configure_gpio(gspca_dev, sn9c1xx);
-/* reg_w1(gspca_dev, 0x01, 0x44); jfm from win trace*/
reg_w1(gspca_dev, 0x15, sn9c1xx[0x15]);
reg_w1(gspca_dev, 0x16, sn9c1xx[0x16]);
reg_w1(gspca_dev, 0x12, sn9c1xx[0x12]);
reg_w1(gspca_dev, 0xc8, 0x50);
reg_w1(gspca_dev, 0xc9, 0x3c);
reg_w1(gspca_dev, 0x18, sn9c1xx[0x18]);
- switch (sd->bridge) {
- case BRIDGE_SN9C325:
+ switch (sd->sensor) {
+ case SENSOR_OV7630:
+ reg17 = 0xe2;
+ break;
+ case SENSOR_OV7648:
reg17 = 0xae;
break;
+/*jfm: from win trace */
+ case SENSOR_OV7660:
+ reg17 = 0xa0;
+ break;
default:
reg17 = 0x60;
break;
reg_w1(gspca_dev, 0x07, sn9c1xx[7]);
reg_w1(gspca_dev, 0x06, sn9c1xx[6]);
reg_w1(gspca_dev, 0x14, sn9c1xx[0x14]);
- switch (sd->bridge) {
- case BRIDGE_SN9C325:
- reg_w(gspca_dev, 0x20, regsn20_sn9c325,
- sizeof regsn20_sn9c325);
- for (i = 0; i < 8; i++)
- reg_w(gspca_dev, 0x84, reg84_sn9c325,
- sizeof reg84_sn9c325);
- reg_w1(gspca_dev, 0x9a, 0x0a);
- reg_w1(gspca_dev, 0x99, 0x60);
- break;
- default:
- reg_w(gspca_dev, 0x20, regsn20, sizeof regsn20);
- for (i = 0; i < 8; i++)
- reg_w(gspca_dev, 0x84, reg84, sizeof reg84);
+ reg_w(gspca_dev, 0x20, gamma_def, sizeof gamma_def);
+ for (i = 0; i < 8; i++)
+ reg_w(gspca_dev, 0x84, reg84, sizeof reg84);
reg_w1(gspca_dev, 0x9a, 0x08);
reg_w1(gspca_dev, 0x99, 0x59);
- break;
- }
mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv;
if (mode)
/* reg1 = 0x06; * 640 clk 24Mz (done) */
}
break;
+ case SENSOR_OM6802:
+ om6802_InitSensor(gspca_dev);
+ reg17 = 0x64; /* 640 MCKSIZE */
+ break;
+ case SENSOR_OV7630:
+ ov7630_InitSensor(gspca_dev);
+ reg17 = 0xe2;
+ reg1 = 0x44;
+ break;
case SENSOR_OV7648:
ov7648_InitSensor(gspca_dev);
reg17 = 0xa2;
}
reg_w(gspca_dev, 0xc0, C0, 6);
reg_w(gspca_dev, 0xca, CA, 4);
- switch (sd->bridge) {
- case BRIDGE_SN9C325:
- reg_w(gspca_dev, 0xce, CE_sn9c325, 4);
+ switch (sd->sensor) {
+ case SENSOR_OV7630:
+ case SENSOR_OV7648:
+ reg_w(gspca_dev, 0xce, CE_ov76xx, 4);
break;
default:
reg_w(gspca_dev, 0xce, CE, 4);
reg_w1(gspca_dev, 0x18, reg18);
reg_w1(gspca_dev, 0x17, reg17);
- reg_w1(gspca_dev, 0x01, reg1);
- setbrightness(gspca_dev);
- setcontrast(gspca_dev);
+ switch (sd->sensor) {
+ case SENSOR_HV7131R:
+ case SENSOR_MI0360:
+ case SENSOR_MO4000:
+ case SENSOR_OM6802:
+ setbrightness(gspca_dev);
+ setcontrast(gspca_dev);
+ break;
+ default: /* OV76xx */
+ setbrightcont(gspca_dev);
+ break;
+ }
setautogain(gspca_dev);
+ reg_w1(gspca_dev, 0x01, reg1);
}
static void sd_stopN(struct gspca_dev *gspca_dev)
i2c_w8(gspca_dev, stopmi0360);
data = 0x29;
break;
+ case SENSOR_OV7630:
case SENSOR_OV7648:
data = 0x29;
break;
reg_w1(gspca_dev, 0x17, sn9c1xx[0x17]);
reg_w1(gspca_dev, 0x01, sn9c1xx[1]);
reg_w1(gspca_dev, 0x01, data);
- reg_w1(gspca_dev, 0xf1, 0x01);
-}
-
-static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-}
-
-static void sd_close(struct gspca_dev *gspca_dev)
-{
+ reg_w1(gspca_dev, 0xf1, 0x00);
}
static void do_autogain(struct gspca_dev *gspca_dev)
default:
/* case SENSOR_MO4000: */
/* case SENSOR_MI0360: */
+/* case SENSOR_OM6802: */
expotimes = sd->exposure;
expotimes += (luma_mean - delta) >> 6;
if (expotimes < 0)
gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len);
}
-static unsigned int getexposure(struct gspca_dev *gspca_dev)
-{
- struct sd *sd = (struct sd *) gspca_dev;
- __u8 hexpo, mexpo, lexpo;
-
- switch (sd->sensor) {
- case SENSOR_HV7131R:
- /* read sensor exposure */
- i2c_r5(gspca_dev, 0x25);
- return (gspca_dev->usb_buf[0] << 16)
- | (gspca_dev->usb_buf[1] << 8)
- | gspca_dev->usb_buf[2];
- case SENSOR_MI0360:
- /* read sensor exposure */
- i2c_r5(gspca_dev, 0x09);
- return (gspca_dev->usb_buf[0] << 8)
- | gspca_dev->usb_buf[1];
- case SENSOR_MO4000:
- i2c_r5(gspca_dev, 0x0e);
- hexpo = 0; /* gspca_dev->usb_buf[1] & 0x07; */
- mexpo = 0x40; /* gspca_dev->usb_buf[2] & 0xff; */
- lexpo = (gspca_dev->usb_buf[1] & 0x30) >> 4;
- PDEBUG(D_CONF, "exposure %d",
- (hexpo << 10) | (mexpo << 2) | lexpo);
- return (hexpo << 10) | (mexpo << 2) | lexpo;
- default:
-/* case SENSOR_OV7648: * jfm: is it ok for 7648? */
-/* case SENSOR_OV7660: */
- /* read sensor exposure */
- i2c_r5(gspca_dev, 0x04);
- hexpo = gspca_dev->usb_buf[3] & 0x2f;
- lexpo = gspca_dev->usb_buf[0] & 0x02;
- i2c_r5(gspca_dev, 0x08);
- mexpo = gspca_dev->usb_buf[2];
- return (hexpo << 10) | (mexpo << 2) | lexpo;
- }
-}
-
-static void getbrightness(struct gspca_dev *gspca_dev)
-{
- struct sd *sd = (struct sd *) gspca_dev;
-
- /* hardcoded registers seem not readable */
- switch (sd->sensor) {
- case SENSOR_HV7131R:
- sd->brightness = getexposure(gspca_dev) >> 4;
- break;
- case SENSOR_MI0360:
- sd->brightness = getexposure(gspca_dev) << 4;
- break;
- case SENSOR_MO4000:
- sd->brightness = getexposure(gspca_dev) << 4;
- break;
- }
-}
-
static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val)
{
struct sd *sd = (struct sd *) gspca_dev;
sd->brightness = val;
- if (gspca_dev->streaming)
- setbrightness(gspca_dev);
+ if (gspca_dev->streaming) {
+ switch (sd->sensor) {
+ case SENSOR_HV7131R:
+ case SENSOR_MI0360:
+ case SENSOR_MO4000:
+ case SENSOR_OM6802:
+ setbrightness(gspca_dev);
+ break;
+ default: /* OV76xx */
+ setbrightcont(gspca_dev);
+ break;
+ }
+ }
return 0;
}
{
struct sd *sd = (struct sd *) gspca_dev;
- getbrightness(gspca_dev);
*val = sd->brightness;
return 0;
}
struct sd *sd = (struct sd *) gspca_dev;
sd->contrast = val;
- if (gspca_dev->streaming)
- setcontrast(gspca_dev);
+ if (gspca_dev->streaming) {
+ switch (sd->sensor) {
+ case SENSOR_HV7131R:
+ case SENSOR_MI0360:
+ case SENSOR_MO4000:
+ case SENSOR_OM6802:
+ setcontrast(gspca_dev);
+ break;
+ default: /* OV76xx */
+ setbrightcont(gspca_dev);
+ break;
+ }
+ }
return 0;
}
.ctrls = sd_ctrls,
.nctrls = ARRAY_SIZE(sd_ctrls),
.config = sd_config,
- .open = sd_open,
+ .init = sd_init,
.start = sd_start,
.stopN = sd_stopN,
- .stop0 = sd_stop0,
- .close = sd_close,
.pkt_scan = sd_pkt_scan,
.dq_callback = do_autogain,
};
| (SENSOR_ ## sensor << 8) \
| (i2c_addr)
static const __devinitdata struct usb_device_id device_table[] = {
-#ifndef CONFIG_USB_SN9C102
+#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
{USB_DEVICE(0x0458, 0x7025), BSI(SN9C120, MI0360, 0x5d)},
{USB_DEVICE(0x045e, 0x00f5), BSI(SN9C105, OV7660, 0x21)},
{USB_DEVICE(0x045e, 0x00f7), BSI(SN9C105, OV7660, 0x21)},
/* {USB_DEVICE(0x0c45, 0x6108), BSI(SN9C120, OM6801, 0x??)}, */
/* {USB_DEVICE(0x0c45, 0x6122), BSI(SN9C110, ICM105C, 0x??)}, */
/* {USB_DEVICE(0x0c45, 0x6123), BSI(SN9C110, SanyoCCD, 0x??)}, */
- {USB_DEVICE(0x0c45, 0x612a), BSI(SN9C325, OV7648, 0x21)},
-/* bw600.inf:
- {USB_DEVICE(0x0c45, 0x612a), BSI(SN9C110, OV7648, 0x21)}, */
+ {USB_DEVICE(0x0c45, 0x6128), BSI(SN9C110, OM6802, 0x21)}, /*sn9c325?*/
+/*bw600.inf:*/
+ {USB_DEVICE(0x0c45, 0x612a), BSI(SN9C110, OV7648, 0x21)}, /*sn9c325?*/
{USB_DEVICE(0x0c45, 0x612c), BSI(SN9C110, MO4000, 0x21)},
-/* {USB_DEVICE(0x0c45, 0x612e), BSI(SN9C110, OV7630, 0x??)}, */
+ {USB_DEVICE(0x0c45, 0x612e), BSI(SN9C110, OV7630, 0x21)},
/* {USB_DEVICE(0x0c45, 0x612f), BSI(SN9C110, ICM105C, 0x??)}, */
-#ifndef CONFIG_USB_SN9C102
+#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
{USB_DEVICE(0x0c45, 0x6130), BSI(SN9C120, MI0360, 0x5d)},
+#endif
{USB_DEVICE(0x0c45, 0x6138), BSI(SN9C120, MO4000, 0x21)},
+#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
/* {USB_DEVICE(0x0c45, 0x613a), BSI(SN9C120, OV7648, 0x??)}, */
{USB_DEVICE(0x0c45, 0x613b), BSI(SN9C120, OV7660, 0x21)},
{USB_DEVICE(0x0c45, 0x613c), BSI(SN9C120, HV7131R, 0x11)},
.id_table = device_table,
.probe = sd_probe,
.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+ .suspend = gspca_suspend,
+ .resume = gspca_resume,
+#endif
};
/* -- module insert / remove -- */
return 0;
}
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
gspca_dev->usb_buf[0]);
}
-static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-}
-
-static void sd_close(struct gspca_dev *gspca_dev)
-{
-}
-
static void sd_pkt_scan(struct gspca_dev *gspca_dev,
struct gspca_frame *frame, /* target */
__u8 *data, /* isoc packet */
.ctrls = sd_ctrls,
.nctrls = ARRAY_SIZE(sd_ctrls),
.config = sd_config,
- .open = sd_open,
+ .init = sd_init,
.start = sd_start,
.stopN = sd_stopN,
- .stop0 = sd_stop0,
- .close = sd_close,
.pkt_scan = sd_pkt_scan,
};
.id_table = device_table,
.probe = sd_probe,
.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+ .suspend = gspca_suspend,
+ .resume = gspca_resume,
+#endif
};
/* -- module insert / remove -- */
return -EINVAL;
}
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
}
static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-}
-
-/* this function is called at close time */
-static void sd_close(struct gspca_dev *gspca_dev)
{
reg_write(gspca_dev->dev, SPCA501_REG_CTLRL, 0x05, 0x00);
}
.ctrls = sd_ctrls,
.nctrls = ARRAY_SIZE(sd_ctrls),
.config = sd_config,
- .open = sd_open,
+ .init = sd_init,
.start = sd_start,
.stopN = sd_stopN,
.stop0 = sd_stop0,
- .close = sd_close,
.pkt_scan = sd_pkt_scan,
};
.id_table = device_table,
.probe = sd_probe,
.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+ .suspend = gspca_suspend,
+ .resume = gspca_resume,
+#endif
};
/* -- module insert / remove -- */
return 0;
}
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
int ret;
}
static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-}
-
-/* this function is called at close time */
-static void sd_close(struct gspca_dev *gspca_dev)
{
/* This maybe reset or power control */
reg_write(gspca_dev->dev, 0x03, 0x03, 0x20);
.ctrls = sd_ctrls,
.nctrls = ARRAY_SIZE(sd_ctrls),
.config = sd_config,
- .open = sd_open,
+ .init = sd_init,
.start = sd_start,
.stopN = sd_stopN,
.stop0 = sd_stop0,
- .close = sd_close,
.pkt_scan = sd_pkt_scan,
};
.id_table = device_table,
.probe = sd_probe,
.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+ .suspend = gspca_suspend,
+ .resume = gspca_resume,
+#endif
};
/* -- module insert / remove -- */
return 0;
}
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
{
struct usb_device *dev = gspca_dev->dev;
reg_w(dev, 0x03, 0x00, 0x0003);
}
-static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-}
-
-static void sd_close(struct gspca_dev *gspca_dev)
-{
-}
-
static void sd_pkt_scan(struct gspca_dev *gspca_dev,
struct gspca_frame *frame, /* target */
__u8 *data, /* isoc packet */
.ctrls = sd_ctrls,
.nctrls = ARRAY_SIZE(sd_ctrls),
.config = sd_config,
- .open = sd_open,
+ .init = sd_init,
.start = sd_start,
.stopN = sd_stopN,
- .stop0 = sd_stop0,
- .close = sd_close,
.pkt_scan = sd_pkt_scan,
};
.id_table = device_table,
.probe = sd_probe,
.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+ .suspend = gspca_suspend,
+ .resume = gspca_resume,
+#endif
};
/* -- module insert / remove -- */
return 0; /* success */
}
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
{
/* write_vector(gspca_dev, spca508_open_data); */
return 0;
reg_write(gspca_dev->dev, 0x8112, 0x20);
}
-static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-}
-
-/* this function is called at close time */
-static void sd_close(struct gspca_dev *gspca_dev)
-{
-}
-
static void sd_pkt_scan(struct gspca_dev *gspca_dev,
struct gspca_frame *frame, /* target */
__u8 *data, /* isoc packet */
.ctrls = sd_ctrls,
.nctrls = ARRAY_SIZE(sd_ctrls),
.config = sd_config,
- .open = sd_open,
+ .init = sd_init,
.start = sd_start,
.stopN = sd_stopN,
- .stop0 = sd_stop0,
- .close = sd_close,
.pkt_scan = sd_pkt_scan,
};
.id_table = device_table,
.probe = sd_probe,
.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+ .suspend = gspca_suspend,
+ .resume = gspca_resume,
+#endif
};
/* -- module insert / remove -- */
struct sd {
struct gspca_dev gspca_dev; /* !! must be the first item */
- unsigned short contrast;
- __u8 brightness;
+ __u16 contrast; /* rev72a only */
+#define CONTRAST_MIN 0x0000
+#define CONTRAST_DEF 0x2000
+#define CONTRAST_MAX 0x3fff
+
+ __u16 exposure; /* rev12a only */
+#define EXPOSURE_MIN 1
+#define EXPOSURE_DEF 200
+#define EXPOSURE_MAX (4095 - 900) /* see set_exposure */
+
+ __u8 brightness; /* rev72a only */
+#define BRIGHTNESS_MIN 0
+#define BRIGHTNESS_DEF 32
+#define BRIGHTNESS_MAX 63
+
+ __u8 white; /* rev12a only */
+#define WHITE_MIN 1
+#define WHITE_DEF 0x40
+#define WHITE_MAX 0x7f
+
__u8 autogain;
+#define AUTOGAIN_MIN 0
+#define AUTOGAIN_DEF 1
+#define AUTOGAIN_MAX 1
+
+ __u8 gain; /* rev12a only */
+#define GAIN_MIN 0x0
+#define GAIN_DEF 0x24
+#define GAIN_MAX 0x24
+
+#define EXPO12A_DEF 3
+ __u8 expo12a; /* expo/gain? for rev 12a */
__u8 chip_revision;
+#define Rev012A 0
+#define Rev072A 1
+
signed char ag_cnt;
#define AG_CNT_START 13
};
-/* V4L2 controls supported by the driver */
-static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val);
-static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val);
-static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val);
-static int sd_getcontrast(struct gspca_dev *gspca_dev, __s32 *val);
-static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val);
-static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val);
-
-static struct ctrl sd_ctrls[] = {
-#define SD_BRIGHTNESS 0
- {
- {
- .id = V4L2_CID_BRIGHTNESS,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "Brightness",
- .minimum = 0,
- .maximum = 63,
- .step = 1,
- .default_value = 32,
- },
- .set = sd_setbrightness,
- .get = sd_getbrightness,
- },
-#define SD_CONTRAST 1
- {
- {
- .id = V4L2_CID_CONTRAST,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "Contrast",
- .minimum = 0,
- .maximum = 0x3fff,
- .step = 1,
- .default_value = 0x2000,
- },
- .set = sd_setcontrast,
- .get = sd_getcontrast,
- },
-#define SD_AUTOGAIN 2
- {
- {
- .id = V4L2_CID_AUTOGAIN,
- .type = V4L2_CTRL_TYPE_BOOLEAN,
- .name = "Auto Gain",
- .minimum = 0,
- .maximum = 1,
- .step = 1,
- .default_value = 1,
- },
- .set = sd_setautogain,
- .get = sd_getautogain,
- },
-};
-
-static struct v4l2_pix_format sif_mode[] = {
+static struct v4l2_pix_format sif_012a_mode[] = {
{160, 120, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE,
.bytesperline = 160,
.sizeimage = 160 * 120,
.priv = 0},
};
+static struct v4l2_pix_format sif_072a_mode[] = {
+ {160, 120, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE,
+ .bytesperline = 160,
+ .sizeimage = 160 * 120,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 3},
+ {176, 144, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE,
+ .bytesperline = 176,
+ .sizeimage = 176 * 144,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 2},
+ {320, 240, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE,
+ .bytesperline = 320,
+ .sizeimage = 320 * 240,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 1},
+ {352, 288, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE,
+ .bytesperline = 352,
+ .sizeimage = 352 * 288,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 0},
+};
+
/*
* Initialization data
* I'm not very sure how to split initialization from open data
#define SPCA561_INDEX_I2C_BASE 0x8800
#define SPCA561_SNAPBIT 0x20
#define SPCA561_SNAPCTRL 0x40
-enum {
- Rev072A = 0,
- Rev012A,
-};
-static void reg_w_val(struct usb_device *dev, __u16 index, __u16 value)
+static void reg_w_val(struct usb_device *dev, __u16 index, __u8 value)
{
int ret;
index, gspca_dev->usb_buf, len, 500);
}
-static void i2c_init(struct gspca_dev *gspca_dev, __u8 mode)
-{
- reg_w_val(gspca_dev->dev, 0x92, 0x8804);
- reg_w_val(gspca_dev->dev, mode, 0x8802);
-}
-
static void i2c_write(struct gspca_dev *gspca_dev, __u16 valeur, __u16 reg)
{
int retry = 60;
DataLow = valeur;
DataHight = valeur >> 8;
- reg_w_val(gspca_dev->dev, reg, 0x8801);
- reg_w_val(gspca_dev->dev, DataLow, 0x8805);
- reg_w_val(gspca_dev->dev, DataHight, 0x8800);
+ reg_w_val(gspca_dev->dev, 0x8801, reg);
+ reg_w_val(gspca_dev->dev, 0x8805, DataLow);
+ reg_w_val(gspca_dev->dev, 0x8800, DataHight);
while (retry--) {
reg_r(gspca_dev, 0x8803, 1);
if (!gspca_dev->usb_buf[0])
__u8 value;
__u8 vallsb;
- reg_w_val(gspca_dev->dev, 0x92, 0x8804);
- reg_w_val(gspca_dev->dev, reg, 0x8801);
- reg_w_val(gspca_dev->dev, (mode | 0x01), 0x8802);
- while (retry--) {
+ reg_w_val(gspca_dev->dev, 0x8804, 0x92);
+ reg_w_val(gspca_dev->dev, 0x8801, reg);
+ reg_w_val(gspca_dev->dev, 0x8802, (mode | 0x01));
+ do {
reg_r(gspca_dev, 0x8803, 1);
if (!gspca_dev->usb_buf)
break;
- }
+ } while (--retry);
if (retry == 0)
return -1;
reg_r(gspca_dev, 0x8800, 1);
{0x0035, 0x8801}, /* 0x14 - set gain general */
{0x001f, 0x8805}, /* 0x14 */
{0x0000, 0x8800},
- {0x0030, 0x8112},
+ {0x000e, 0x8112}, /* white balance - was 30 */
{}
};
-static void sensor_reset(struct gspca_dev *gspca_dev)
-{
- reg_w_val(gspca_dev->dev, 0x8631, 0xc8);
- reg_w_val(gspca_dev->dev, 0x8634, 0xc8);
- reg_w_val(gspca_dev->dev, 0x8112, 0x00);
- reg_w_val(gspca_dev->dev, 0x8114, 0x00);
- reg_w_val(gspca_dev->dev, 0x8118, 0x21);
- i2c_init(gspca_dev, 0x14);
- i2c_write(gspca_dev, 1, 0x0d);
- i2c_write(gspca_dev, 0, 0x0d);
-}
/******************** QC Express etch2 stuff ********************/
static const __u16 Pb100_1map8300[][2] = {
{0x8303, 0x0125}, /* image area */
{0x8304, 0x0169},
{0x8328, 0x000b},
- {0x833c, 0x0001},
+ {0x833c, 0x0001}, /*fixme: win:07*/
- {0x832f, 0x0419},
+ {0x832f, 0x1904}, /*fixme: was 0419*/
{0x8307, 0x00aa},
{0x8301, 0x0003},
{0x8302, 0x000e},
};
static const __u16 spca561_161rev12A_data1[][2] = {
- {0x21, 0x8118},
- {0x01, 0x8114},
- {0x00, 0x8112},
+ {0x29, 0x8118}, /* white balance - was 21 */
+ {0x08, 0x8114}, /* white balance - was 01 */
+ {0x0e, 0x8112}, /* white balance - was 00 */
+ {0x00, 0x8102}, /* white balance - new */
{0x92, 0x8804},
{0x04, 0x8802}, /* windows uses 08 */
{}
{0xb0, 0x8603},
/* sensor gains */
+ {0x07, 0x8601}, /* white balance - new */
+ {0x07, 0x8602}, /* white balance - new */
{0x00, 0x8610}, /* *red */
{0x00, 0x8611}, /* 3f *green */
{0x00, 0x8612}, /* green *blue */
{0x00, 0x8613}, /* blue *green */
- {0x35, 0x8614}, /* green *red */
- {0x35, 0x8615}, /* 40 *green */
- {0x35, 0x8616}, /* 7a *blue */
- {0x35, 0x8617}, /* 40 *green */
+ {0x43, 0x8614}, /* green *red - white balance - was 0x35 */
+ {0x40, 0x8615}, /* 40 *green - white balance - was 0x35 */
+ {0x71, 0x8616}, /* 7a *blue - white balance - was 0x35 */
+ {0x40, 0x8617}, /* 40 *green - white balance - was 0x35 */
{0x0c, 0x8620}, /* 0c */
{0xc8, 0x8631}, /* c8 */
{0xdf, 0x863c}, /* df */
{0xf0, 0x8505},
{0x32, 0x850a},
+/* {0x99, 0x8700}, * - white balance - new (removed) */
{}
};
}
static void init_161rev12A(struct gspca_dev *gspca_dev)
{
- sensor_reset(gspca_dev);
+/* sensor_reset(gspca_dev); (not in win) */
write_vector(gspca_dev, spca561_161rev12A_data1);
sensor_mapwrite(gspca_dev, Pb100_1map8300);
+/*fixme: should be in sd_start*/
write_vector(gspca_dev, spca561_161rev12A_data2);
sensor_mapwrite(gspca_dev, Pb100_2map8300);
}
}
cam = &gspca_dev->cam;
- cam->dev_name = (char *) id->driver_info;
cam->epaddr = 0x01;
gspca_dev->nbalt = 7 + 1; /* choose alternate 7 first */
- cam->cam_mode = sif_mode;
- cam->nmodes = sizeof sif_mode / sizeof sif_mode[0];
sd->chip_revision = id->driver_info;
- sd->brightness = sd_ctrls[SD_BRIGHTNESS].qctrl.default_value;
- sd->contrast = sd_ctrls[SD_CONTRAST].qctrl.default_value;
- sd->autogain = sd_ctrls[SD_AUTOGAIN].qctrl.default_value;
+ if (sd->chip_revision == Rev012A) {
+ cam->cam_mode = sif_012a_mode;
+ cam->nmodes = ARRAY_SIZE(sif_012a_mode);
+ } else {
+ cam->cam_mode = sif_072a_mode;
+ cam->nmodes = ARRAY_SIZE(sif_072a_mode);
+ }
+ sd->brightness = BRIGHTNESS_DEF;
+ sd->contrast = CONTRAST_DEF;
+ sd->white = WHITE_DEF;
+ sd->exposure = EXPOSURE_DEF;
+ sd->autogain = AUTOGAIN_DEF;
+ sd->gain = GAIN_DEF;
+ sd->expo12a = EXPO12A_DEF;
return 0;
}
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init_12a(struct gspca_dev *gspca_dev)
{
- struct sd *sd = (struct sd *) gspca_dev;
-
- switch (sd->chip_revision) {
- case Rev072A:
- PDEBUG(D_STREAM, "Chip revision id: 072a");
- write_vector(gspca_dev, spca561_init_data);
- break;
- default:
-/* case Rev012A: */
- PDEBUG(D_STREAM, "Chip revision id: 012a");
- init_161rev12A(gspca_dev);
- break;
- }
+ PDEBUG(D_STREAM, "Chip revision: 012a");
+ init_161rev12A(gspca_dev);
+ return 0;
+}
+static int sd_init_72a(struct gspca_dev *gspca_dev)
+{
+ PDEBUG(D_STREAM, "Chip revision: 072a");
+ write_vector(gspca_dev, spca561_init_data);
return 0;
}
struct sd *sd = (struct sd *) gspca_dev;
struct usb_device *dev = gspca_dev->dev;
__u8 lowb;
- int expotimes;
switch (sd->chip_revision) {
case Rev072A:
lowb = sd->contrast >> 8;
- reg_w_val(dev, lowb, 0x8651);
- reg_w_val(dev, lowb, 0x8652);
- reg_w_val(dev, lowb, 0x8653);
- reg_w_val(dev, lowb, 0x8654);
+ reg_w_val(dev, 0x8651, lowb);
+ reg_w_val(dev, 0x8652, lowb);
+ reg_w_val(dev, 0x8653, lowb);
+ reg_w_val(dev, 0x8654, lowb);
break;
- case Rev012A: {
- __u8 Reg8391[] =
- { 0x00, 0x00, 0x00, 0x00, 0x0c, 0x00, 0x00, 0x00 };
-
- /* Write camera sensor settings */
- expotimes = (sd->contrast >> 5) & 0x07ff;
- Reg8391[0] = expotimes & 0xff; /* exposure */
- Reg8391[1] = 0x18 | (expotimes >> 8);
- Reg8391[2] = sd->brightness; /* gain */
+ default: {
+/* case Rev012A: { */
+ static const __u8 Reg8391[] =
+ { 0x92, 0x30, 0x20, 0x00, 0x0c, 0x00, 0x00, 0x00 };
+
reg_w_buf(gspca_dev, 0x8391, Reg8391, 8);
reg_w_buf(gspca_dev, 0x8390, Reg8391, 8);
break;
}
}
-static void setautogain(struct gspca_dev *gspca_dev)
+/* rev12a only */
+static void setwhite(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
+ __u16 white;
+ __u8 reg8614, reg8616;
+
+ white = sd->white;
+ /* try to emulate MS-win as possible */
+ reg8616 = 0x90 - white * 5 / 8;
+ reg_w_val(gspca_dev->dev, 0x8616, reg8616);
+ reg8614 = 0x20 + white * 3 / 8;
+ reg_w_val(gspca_dev->dev, 0x8614, reg8614);
+}
- if (sd->chip_revision == Rev072A) {
- if (sd->autogain)
- sd->ag_cnt = AG_CNT_START;
- else
- sd->ag_cnt = -1;
+/* rev 12a only */
+static void setexposure(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ int expo;
+ int clock_divider;
+ __u8 data[2];
+
+ /* Register 0x8309 controls exposure for the spca561,
+ the basic exposure setting goes from 1-2047, where 1 is completely
+ dark and 2047 is very bright. It not only influences exposure but
+ also the framerate (to allow for longer exposure) from 1 - 300 it
+ only raises the exposure time then from 300 - 600 it halves the
+ framerate to be able to further raise the exposure time and for every
+ 300 more it halves the framerate again. This allows for a maximum
+ exposure time of circa 0.2 - 0.25 seconds (30 / (2000/3000) fps).
+ Sometimes this is not enough, the 1-2047 uses bits 0-10, bits 11-12
+ configure a divider for the base framerate which us used at the
+ exposure setting of 1-300. These bits configure the base framerate
+ according to the following formula: fps = 60 / (value + 2) */
+ if (sd->exposure < 2048) {
+ expo = sd->exposure;
+ clock_divider = 0;
+ } else {
+ /* Add 900 to make the 0 setting of the second part of the
+ exposure equal to the 2047 setting of the first part. */
+ expo = (sd->exposure - 2048) + 900;
+ clock_divider = 3;
}
+ expo |= clock_divider << 11;
+ data[0] = expo;
+ data[1] = expo >> 8;
+ reg_w_buf(gspca_dev, 0x8309, data, 2);
}
-static void sd_start(struct gspca_dev *gspca_dev)
+/* rev 12a only */
+static void setgain(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
+ __u8 data[2];
+
+ data[0] = sd->gain;
+ data[1] = 0;
+ reg_w_buf(gspca_dev, 0x8335, data, 2);
+}
+
+static void setautogain(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ if (sd->autogain)
+ sd->ag_cnt = AG_CNT_START;
+ else
+ sd->ag_cnt = -1;
+}
+
+static void sd_start_12a(struct gspca_dev *gspca_dev)
+{
struct usb_device *dev = gspca_dev->dev;
- int Clck;
+ int Clck = 0x8a; /* lower 0x8X values lead to fps > 30 */
__u8 Reg8307[] = { 0xaa, 0x00 };
int mode;
mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv;
- switch (sd->chip_revision) {
- case Rev072A:
- switch (mode) {
- default:
-/* case 0:
- case 1: */
- Clck = 0x25;
- break;
- case 2:
- Clck = 0x22;
- break;
- case 3:
- Clck = 0x21;
- break;
- }
- reg_w_val(dev, 0x8500, mode); /* mode */
- reg_w_val(dev, 0x8700, Clck); /* 0x27 clock */
- reg_w_val(dev, 0x8112, 0x10 | 0x20);
- setautogain(gspca_dev);
- break;
+ if (mode <= 1) {
+ /* Use compression on 320x240 and above */
+ reg_w_val(dev, 0x8500, 0x10 | mode);
+ } else {
+ /* I couldn't get the compression to work below 320x240
+ * Fortunately at these resolutions the bandwidth
+ * is sufficient to push raw frames at ~20fps */
+ reg_w_val(dev, 0x8500, mode);
+ } /* -- qq@kuku.eu.org */
+ reg_w_buf(gspca_dev, 0x8307, Reg8307, 2);
+ reg_w_val(gspca_dev->dev, 0x8700, Clck);
+ /* 0x8f 0x85 0x27 clock */
+ reg_w_val(gspca_dev->dev, 0x8112, 0x1e | 0x20);
+ reg_w_val(gspca_dev->dev, 0x850b, 0x03);
+ setcontrast(gspca_dev);
+ setwhite(gspca_dev);
+ setautogain(gspca_dev);
+ setexposure(gspca_dev);
+}
+static void sd_start_72a(struct gspca_dev *gspca_dev)
+{
+ struct usb_device *dev = gspca_dev->dev;
+ int Clck;
+ int mode;
+
+ mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv;
+ switch (mode) {
default:
-/* case Rev012A: */
- switch (mode) {
- case 0:
- case 1:
- Clck = 0x8a;
- break;
- case 2:
- Clck = 0x85;
- break;
- default:
- Clck = 0x83;
- break;
- }
- if (mode <= 1) {
- /* Use compression on 320x240 and above */
- reg_w_val(dev, 0x8500, 0x10 | mode);
- } else {
- /* I couldn't get the compression to work below 320x240
- * Fortunately at these resolutions the bandwidth
- * is sufficient to push raw frames at ~20fps */
- reg_w_val(dev, 0x8500, mode);
- } /* -- qq@kuku.eu.org */
- reg_w_buf(gspca_dev, 0x8307, Reg8307, 2);
- reg_w_val(gspca_dev->dev, 0x8700, Clck);
- /* 0x8f 0x85 0x27 clock */
- reg_w_val(gspca_dev->dev, 0x8112, 0x1e | 0x20);
- reg_w_val(gspca_dev->dev, 0x850b, 0x03);
- setcontrast(gspca_dev);
+/* case 0:
+ case 1: */
+ Clck = 0x25;
+ break;
+ case 2:
+ Clck = 0x22;
+ break;
+ case 3:
+ Clck = 0x21;
break;
}
+ reg_w_val(dev, 0x8500, mode); /* mode */
+ reg_w_val(dev, 0x8700, Clck); /* 0x27 clock */
+ reg_w_val(dev, 0x8112, 0x10 | 0x20);
+ setautogain(gspca_dev);
}
static void sd_stopN(struct gspca_dev *gspca_dev)
{
- reg_w_val(gspca_dev->dev, 0x8112, 0x20);
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ if (sd->chip_revision == Rev012A) {
+ reg_w_val(gspca_dev->dev, 0x8112, 0x0e);
+ } else {
+ reg_w_val(gspca_dev->dev, 0x8112, 0x20);
+/* reg_w_val(gspca_dev->dev, 0x8102, 0x00); ?? */
+ }
}
static void sd_stop0(struct gspca_dev *gspca_dev)
{
-}
+ struct sd *sd = (struct sd *) gspca_dev;
-/* this function is called at close time */
-static void sd_close(struct gspca_dev *gspca_dev)
-{
- reg_w_val(gspca_dev->dev, 0x8114, 0);
+ if (sd->chip_revision == Rev012A) {
+ reg_w_val(gspca_dev->dev, 0x8118, 0x29);
+ reg_w_val(gspca_dev->dev, 0x8114, 0x08);
+ }
+/* reg_w_val(gspca_dev->dev, 0x8114, 0); */
}
static void do_autogain(struct gspca_dev *gspca_dev)
__u8 luma_mean = 110;
__u8 luma_delta = 20;
__u8 spring = 4;
+ __u8 reg8339[2];
if (sd->ag_cnt < 0)
return;
}
break;
case Rev012A:
- /* sensor registers is access and memory mapped to 0x8300 */
- /* readind all 0x83xx block the sensor */
- /*
- * The data from the header seem wrong where is the luma
- * and chroma mean value
- * at the moment set exposure in contrast set
- */
+ reg_r(gspca_dev, 0x8330, 2);
+ if (gspca_dev->usb_buf[1] > 0x08) {
+ reg8339[0] = ++sd->expo12a;
+ reg8339[1] = 0;
+ reg_w_buf(gspca_dev, 0x8339, reg8339, 2);
+ } else if (gspca_dev->usb_buf[1] < 0x02) {
+ reg8339[0] = --sd->expo12a;
+ reg8339[1] = 0;
+ reg_w_buf(gspca_dev, 0x8339, reg8339, 2);
+ }
break;
}
}
__u8 *data, /* isoc packet */
int len) /* iso packet length */
{
+ struct sd *sd = (struct sd *) gspca_dev;
+
switch (data[0]) {
case 0: /* start of frame */
frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame,
frame, data, len);
} else {
/* raw bayer (with a header, which we skip) */
- data += 20;
- len -= 20;
+ if (sd->chip_revision == Rev012A) {
+ data += 20;
+ len -= 20;
+ } else {
+ data += 16;
+ len -= 16;
+ }
gspca_frame_add(gspca_dev, FIRST_PACKET,
frame, data, len);
}
gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len);
}
+/* rev 72a only */
static void setbrightness(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
__u8 value;
- switch (sd->chip_revision) {
- case Rev072A:
- value = sd->brightness;
- reg_w_val(gspca_dev->dev, value, 0x8611);
- reg_w_val(gspca_dev->dev, value, 0x8612);
- reg_w_val(gspca_dev->dev, value, 0x8613);
- reg_w_val(gspca_dev->dev, value, 0x8614);
- break;
- default:
-/* case Rev012A: */
- setcontrast(gspca_dev);
- break;
- }
+ value = sd->brightness;
+ reg_w_val(gspca_dev->dev, 0x8611, value);
+ reg_w_val(gspca_dev->dev, 0x8612, value);
+ reg_w_val(gspca_dev->dev, 0x8613, value);
+ reg_w_val(gspca_dev->dev, 0x8614, value);
}
static void getbrightness(struct gspca_dev *gspca_dev)
struct sd *sd = (struct sd *) gspca_dev;
__u16 tot;
- switch (sd->chip_revision) {
- case Rev072A:
- tot = 0;
- reg_r(gspca_dev, 0x8611, 1);
- tot += gspca_dev->usb_buf[0];
- reg_r(gspca_dev, 0x8612, 1);
- tot += gspca_dev->usb_buf[0];
- reg_r(gspca_dev, 0x8613, 1);
- tot += gspca_dev->usb_buf[0];
- reg_r(gspca_dev, 0x8614, 1);
- tot += gspca_dev->usb_buf[0];
- sd->brightness = tot >> 2;
- break;
- default:
-/* case Rev012A: */
- /* no way to read sensor settings */
- break;
- }
+ tot = 0;
+ reg_r(gspca_dev, 0x8611, 1);
+ tot += gspca_dev->usb_buf[0];
+ reg_r(gspca_dev, 0x8612, 1);
+ tot += gspca_dev->usb_buf[0];
+ reg_r(gspca_dev, 0x8613, 1);
+ tot += gspca_dev->usb_buf[0];
+ reg_r(gspca_dev, 0x8614, 1);
+ tot += gspca_dev->usb_buf[0];
+ sd->brightness = tot >> 2;
}
+/* rev72a only */
static void getcontrast(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
__u16 tot;
- switch (sd->chip_revision) {
- case Rev072A:
- tot = 0;
- reg_r(gspca_dev, 0x8651, 1);
- tot += gspca_dev->usb_buf[0];
- reg_r(gspca_dev, 0x8652, 1);
- tot += gspca_dev->usb_buf[0];
- reg_r(gspca_dev, 0x8653, 1);
- tot += gspca_dev->usb_buf[0];
- reg_r(gspca_dev, 0x8654, 1);
- tot += gspca_dev->usb_buf[0];
- sd->contrast = tot << 6;
- break;
- default:
-/* case Rev012A: */
- /* no way to read sensor settings */
- break;
- }
+ tot = 0;
+ reg_r(gspca_dev, 0x8651, 1);
+ tot += gspca_dev->usb_buf[0];
+ reg_r(gspca_dev, 0x8652, 1);
+ tot += gspca_dev->usb_buf[0];
+ reg_r(gspca_dev, 0x8653, 1);
+ tot += gspca_dev->usb_buf[0];
+ reg_r(gspca_dev, 0x8654, 1);
+ tot += gspca_dev->usb_buf[0];
+ sd->contrast = tot << 6;
PDEBUG(D_CONF, "get contrast %d", sd->contrast);
}
+/* rev 72a only */
static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val)
{
struct sd *sd = (struct sd *) gspca_dev;
return 0;
}
+/* rev 72a only */
static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val)
{
struct sd *sd = (struct sd *) gspca_dev;
return 0;
}
+/* rev12a only */
+static int sd_setwhite(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->white = val;
+ if (gspca_dev->streaming)
+ setwhite(gspca_dev);
+ return 0;
+}
+
+static int sd_getwhite(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->white;
+ return 0;
+}
+
+/* rev12a only */
+static int sd_setexposure(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->exposure = val;
+ if (gspca_dev->streaming)
+ setexposure(gspca_dev);
+ return 0;
+}
+
+static int sd_getexposure(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->exposure;
+ return 0;
+}
+
+/* rev12a only */
+static int sd_setgain(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->gain = val;
+ if (gspca_dev->streaming)
+ setgain(gspca_dev);
+ return 0;
+}
+
+static int sd_getgain(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->gain;
+ return 0;
+}
+
+/* control tables */
+static struct ctrl sd_ctrls_12a[] = {
+ {
+ {
+ .id = V4L2_CID_DO_WHITE_BALANCE,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "While Balance",
+ .minimum = WHITE_MIN,
+ .maximum = WHITE_MAX,
+ .step = 1,
+ .default_value = WHITE_DEF,
+ },
+ .set = sd_setwhite,
+ .get = sd_getwhite,
+ },
+ {
+ {
+ .id = V4L2_CID_EXPOSURE,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Exposure",
+ .minimum = EXPOSURE_MIN,
+ .maximum = EXPOSURE_MAX,
+ .step = 1,
+ .default_value = EXPOSURE_DEF,
+ },
+ .set = sd_setexposure,
+ .get = sd_getexposure,
+ },
+ {
+ {
+ .id = V4L2_CID_AUTOGAIN,
+ .type = V4L2_CTRL_TYPE_BOOLEAN,
+ .name = "Auto Gain",
+ .minimum = AUTOGAIN_MIN,
+ .maximum = AUTOGAIN_MAX,
+ .step = 1,
+ .default_value = AUTOGAIN_DEF,
+ },
+ .set = sd_setautogain,
+ .get = sd_getautogain,
+ },
+ {
+ {
+ .id = V4L2_CID_GAIN,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Gain",
+ .minimum = GAIN_MIN,
+ .maximum = GAIN_MAX,
+ .step = 1,
+ .default_value = GAIN_DEF,
+ },
+ .set = sd_setgain,
+ .get = sd_getgain,
+ },
+};
+
+static struct ctrl sd_ctrls_72a[] = {
+ {
+ {
+ .id = V4L2_CID_BRIGHTNESS,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Brightness",
+ .minimum = BRIGHTNESS_MIN,
+ .maximum = BRIGHTNESS_MAX,
+ .step = 1,
+ .default_value = BRIGHTNESS_DEF,
+ },
+ .set = sd_setbrightness,
+ .get = sd_getbrightness,
+ },
+ {
+ {
+ .id = V4L2_CID_CONTRAST,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Contrast",
+ .minimum = CONTRAST_MIN,
+ .maximum = CONTRAST_MAX,
+ .step = 1,
+ .default_value = CONTRAST_DEF,
+ },
+ .set = sd_setcontrast,
+ .get = sd_getcontrast,
+ },
+ {
+ {
+ .id = V4L2_CID_AUTOGAIN,
+ .type = V4L2_CTRL_TYPE_BOOLEAN,
+ .name = "Auto Gain",
+ .minimum = AUTOGAIN_MIN,
+ .maximum = AUTOGAIN_MAX,
+ .step = 1,
+ .default_value = AUTOGAIN_DEF,
+ },
+ .set = sd_setautogain,
+ .get = sd_getautogain,
+ },
+};
+
/* sub-driver description */
-static const struct sd_desc sd_desc = {
+static const struct sd_desc sd_desc_12a = {
+ .name = MODULE_NAME,
+ .ctrls = sd_ctrls_12a,
+ .nctrls = ARRAY_SIZE(sd_ctrls_12a),
+ .config = sd_config,
+ .init = sd_init_12a,
+ .start = sd_start_12a,
+ .stopN = sd_stopN,
+ .stop0 = sd_stop0,
+ .pkt_scan = sd_pkt_scan,
+/* .dq_callback = do_autogain, * fixme */
+};
+static const struct sd_desc sd_desc_72a = {
.name = MODULE_NAME,
- .ctrls = sd_ctrls,
- .nctrls = ARRAY_SIZE(sd_ctrls),
+ .ctrls = sd_ctrls_72a,
+ .nctrls = ARRAY_SIZE(sd_ctrls_72a),
.config = sd_config,
- .open = sd_open,
- .start = sd_start,
+ .init = sd_init_72a,
+ .start = sd_start_72a,
.stopN = sd_stopN,
.stop0 = sd_stop0,
- .close = sd_close,
.pkt_scan = sd_pkt_scan,
.dq_callback = do_autogain,
};
+static const struct sd_desc *sd_desc[2] = {
+ &sd_desc_12a,
+ &sd_desc_72a
+};
/* -- module initialisation -- */
static const __devinitdata struct usb_device_id device_table[] = {
static int sd_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
- return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd),
+ return gspca_dev_probe(intf, id,
+ sd_desc[id->driver_info],
+ sizeof(struct sd),
THIS_MODULE);
}
.id_table = device_table,
.probe = sd_probe,
.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+ .suspend = gspca_suspend,
+ .resume = gspca_resume,
+#endif
};
/* -- module insert / remove -- */
return 0;
}
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
{
int ret;
PDEBUG(D_STREAM, "camera stopped");
}
-static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-}
-
-static void sd_close(struct gspca_dev *gspca_dev)
-{
-}
-
static void sd_pkt_scan(struct gspca_dev *gspca_dev,
struct gspca_frame *frame, /* target */
__u8 *data, /* isoc packet */
.ctrls = sd_ctrls,
.nctrls = ARRAY_SIZE(sd_ctrls),
.config = sd_config,
- .open = sd_open,
+ .init = sd_init,
.start = sd_start,
.stopN = sd_stopN,
- .stop0 = sd_stop0,
- .close = sd_close,
.pkt_scan = sd_pkt_scan,
.querymenu = sd_querymenu,
};
.id_table = device_table,
.probe = sd_probe,
.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+ .suspend = gspca_suspend,
+ .resume = gspca_resume,
+#endif
};
/* -- module insert / remove -- */
0x1e, 0x1e, 0x1e, 0x1e, 0x1e, 0x1e, 0x1e, 0x1e}
};
-static void reg_r(struct usb_device *dev,
- __u16 req,
- __u16 index,
- __u8 *buffer, __u16 length)
+/* read <len> bytes to gspca_dev->usb_buf */
+static void reg_r(struct gspca_dev *gspca_dev,
+ __u16 req,
+ __u16 index,
+ __u16 len)
{
- usb_control_msg(dev,
- usb_rcvctrlpipe(dev, 0),
+#ifdef GSPCA_DEBUG
+ if (len > USB_BUF_SZ) {
+ err("reg_r: buffer overflow");
+ return;
+ }
+#endif
+ usb_control_msg(gspca_dev->dev,
+ usb_rcvctrlpipe(gspca_dev->dev, 0),
req,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0, /* value */
- index, buffer, length,
+ index,
+ len ? gspca_dev->usb_buf : NULL, len,
500);
}
-static void reg_w(struct usb_device *dev,
- __u16 req,
- __u16 value,
- __u16 index,
- __u8 *buffer, __u16 length)
+/* write <len> bytes from gspca_dev->usb_buf */
+static void reg_w(struct gspca_dev *gspca_dev,
+ __u16 req,
+ __u16 value,
+ __u16 index,
+ __u16 len)
{
- usb_control_msg(dev,
- usb_sndctrlpipe(dev, 0),
+#ifdef GSPCA_DEBUG
+ if (len > USB_BUF_SZ) {
+ err("reg_w: buffer overflow");
+ return;
+ }
+#endif
+ usb_control_msg(gspca_dev->dev,
+ usb_sndctrlpipe(gspca_dev->dev, 0),
req,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- value, index, buffer, length,
+ value, index,
+ len ? gspca_dev->usb_buf : NULL, len,
500);
}
int count = 10;
while (--count > 0) {
- reg_r(gspca_dev->dev, 0x21, 0, gspca_dev->usb_buf, 1);
+ reg_r(gspca_dev, 0x21, 0, 1);
if ((gspca_dev->usb_buf[0] & 0x01) == 0)
break;
msleep(10);
static void spca504B_WaitCmdStatus(struct gspca_dev *gspca_dev)
{
- struct usb_device *dev = gspca_dev->dev;
int count = 50;
while (--count > 0) {
- reg_r(dev, 0x21, 1, gspca_dev->usb_buf, 1);
+ reg_r(gspca_dev, 0x21, 1, 1);
if (gspca_dev->usb_buf[0] != 0) {
gspca_dev->usb_buf[0] = 0;
- reg_w(dev, 0x21, 0, 1, gspca_dev->usb_buf, 1);
- reg_r(dev, 0x21, 1, gspca_dev->usb_buf, 1);
+ reg_w(gspca_dev, 0x21, 0, 1, 1);
+ reg_r(gspca_dev, 0x21, 1, 1);
spca504B_PollingDataReady(gspca_dev);
break;
}
static void spca50x_GetFirmware(struct gspca_dev *gspca_dev)
{
- struct usb_device *dev = gspca_dev->dev;
__u8 *data;
- data = kmalloc(64, GFP_KERNEL);
- reg_r(dev, 0x20, 0, data, 5);
+ data = gspca_dev->usb_buf;
+ reg_r(gspca_dev, 0x20, 0, 5);
PDEBUG(D_STREAM, "FirmWare : %d %d %d %d %d ",
data[0], data[1], data[2], data[3], data[4]);
- reg_r(dev, 0x23, 0, data, 64);
- reg_r(dev, 0x23, 1, data, 64);
- kfree(data);
+ reg_r(gspca_dev, 0x23, 0, 64);
+ reg_r(gspca_dev, 0x23, 1, 64);
}
static void spca504B_SetSizeType(struct gspca_dev *gspca_dev)
Type = 0;
switch (sd->bridge) {
case BRIDGE_SPCA533:
- reg_w(dev, 0x31, 0, 0, NULL, 0);
+ reg_w(gspca_dev, 0x31, 0, 0, 0);
spca504B_WaitCmdStatus(gspca_dev);
rc = spca504B_PollingDataReady(gspca_dev);
spca50x_GetFirmware(gspca_dev);
gspca_dev->usb_buf[0] = 2; /* type */
- reg_w(dev, 0x24, 0, 8, gspca_dev->usb_buf, 1);
- reg_r(dev, 0x24, 8, gspca_dev->usb_buf, 1);
+ reg_w(gspca_dev, 0x24, 0, 8, 1);
+ reg_r(gspca_dev, 0x24, 8, 1);
gspca_dev->usb_buf[0] = Size;
- reg_w(dev, 0x25, 0, 4, gspca_dev->usb_buf, 1);
- reg_r(dev, 0x25, 4, gspca_dev->usb_buf, 1); /* size */
+ reg_w(gspca_dev, 0x25, 0, 4, 1);
+ reg_r(gspca_dev, 0x25, 4, 1); /* size */
rc = spca504B_PollingDataReady(gspca_dev);
/* Init the cam width height with some values get on init ? */
- reg_w(dev, 0x31, 0, 4, NULL, 0);
+ reg_w(gspca_dev, 0x31, 0, 4, 0);
spca504B_WaitCmdStatus(gspca_dev);
rc = spca504B_PollingDataReady(gspca_dev);
break;
/* case BRIDGE_SPCA504B: */
/* case BRIDGE_SPCA536: */
gspca_dev->usb_buf[0] = Size;
- reg_w(dev, 0x25, 0, 4, gspca_dev->usb_buf, 1);
- reg_r(dev, 0x25, 4, gspca_dev->usb_buf, 1); /* size */
+ reg_w(gspca_dev, 0x25, 0, 4, 1);
+ reg_r(gspca_dev, 0x25, 4, 1); /* size */
Type = 6;
gspca_dev->usb_buf[0] = Type;
- reg_w(dev, 0x27, 0, 0, gspca_dev->usb_buf, 1);
- reg_r(dev, 0x27, 0, gspca_dev->usb_buf, 1); /* type */
+ reg_w(gspca_dev, 0x27, 0, 0, 1);
+ reg_r(gspca_dev, 0x27, 0, 1); /* type */
rc = spca504B_PollingDataReady(gspca_dev);
break;
case BRIDGE_SPCA504:
static void spca504B_setQtable(struct gspca_dev *gspca_dev)
{
- struct usb_device *dev = gspca_dev->dev;
-
gspca_dev->usb_buf[0] = 3;
- reg_w(dev, 0x26, 0, 0, gspca_dev->usb_buf, 1);
- reg_r(dev, 0x26, 0, gspca_dev->usb_buf, 1);
+ reg_w(gspca_dev, 0x26, 0, 0, 1);
+ reg_r(gspca_dev, 0x26, 0, 1);
spca504B_PollingDataReady(gspca_dev);
}
static void sp5xx_initContBrigHueRegisters(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
- struct usb_device *dev = gspca_dev->dev;
int pollreg = 1;
switch (sd->bridge) {
default:
/* case BRIDGE_SPCA533: */
/* case BRIDGE_SPCA504B: */
- reg_w(dev, 0, 0, 0x21a7, NULL, 0); /* brightness */
- reg_w(dev, 0, 0x20, 0x21a8, NULL, 0); /* contrast */
- reg_w(dev, 0, 0, 0x21ad, NULL, 0); /* hue */
- reg_w(dev, 0, 1, 0x21ac, NULL, 0); /* sat/hue */
- reg_w(dev, 0, 0x20, 0x21ae, NULL, 0); /* saturation */
- reg_w(dev, 0, 0, 0x21a3, NULL, 0); /* gamma */
+ reg_w(gspca_dev, 0, 0, 0x21a7, 0); /* brightness */
+ reg_w(gspca_dev, 0, 0x20, 0x21a8, 0); /* contrast */
+ reg_w(gspca_dev, 0, 0, 0x21ad, 0); /* hue */
+ reg_w(gspca_dev, 0, 1, 0x21ac, 0); /* sat/hue */
+ reg_w(gspca_dev, 0, 0x20, 0x21ae, 0); /* saturation */
+ reg_w(gspca_dev, 0, 0, 0x21a3, 0); /* gamma */
break;
case BRIDGE_SPCA536:
- reg_w(dev, 0, 0, 0x20f0, NULL, 0);
- reg_w(dev, 0, 0x21, 0x20f1, NULL, 0);
- reg_w(dev, 0, 0x40, 0x20f5, NULL, 0);
- reg_w(dev, 0, 1, 0x20f4, NULL, 0);
- reg_w(dev, 0, 0x40, 0x20f6, NULL, 0);
- reg_w(dev, 0, 0, 0x2089, NULL, 0);
+ reg_w(gspca_dev, 0, 0, 0x20f0, 0);
+ reg_w(gspca_dev, 0, 0x21, 0x20f1, 0);
+ reg_w(gspca_dev, 0, 0x40, 0x20f5, 0);
+ reg_w(gspca_dev, 0, 1, 0x20f4, 0);
+ reg_w(gspca_dev, 0, 0x40, 0x20f6, 0);
+ reg_w(gspca_dev, 0, 0, 0x2089, 0);
break;
}
if (pollreg)
const struct usb_device_id *id)
{
struct sd *sd = (struct sd *) gspca_dev;
- struct usb_device *dev = gspca_dev->dev;
struct cam *cam;
cam = &gspca_dev->cam;
if (sd->subtype == AiptekMiniPenCam13) {
/* try to get the firmware as some cam answer 2.0.1.2.2
* and should be a spca504b then overwrite that setting */
- reg_r(dev, 0x20, 0, gspca_dev->usb_buf, 1);
+ reg_r(gspca_dev, 0x20, 0, 1);
switch (gspca_dev->usb_buf[0]) {
case 1:
break; /* (right bridge/subtype) */
return 0;
}
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
struct usb_device *dev = gspca_dev->dev;
switch (sd->bridge) {
case BRIDGE_SPCA504B:
- reg_w(dev, 0x1d, 0, 0, NULL, 0);
- reg_w(dev, 0, 1, 0x2306, NULL, 0);
- reg_w(dev, 0, 0, 0x0d04, NULL, 0);
- reg_w(dev, 0, 0, 0x2000, NULL, 0);
- reg_w(dev, 0, 0x13, 0x2301, NULL, 0);
- reg_w(dev, 0, 0, 0x2306, NULL, 0);
+ reg_w(gspca_dev, 0x1d, 0, 0, 0);
+ reg_w(gspca_dev, 0, 1, 0x2306, 0);
+ reg_w(gspca_dev, 0, 0, 0x0d04, 0);
+ reg_w(gspca_dev, 0, 0, 0x2000, 0);
+ reg_w(gspca_dev, 0, 0x13, 0x2301, 0);
+ reg_w(gspca_dev, 0, 0, 0x2306, 0);
/* fall thru */
case BRIDGE_SPCA533:
rc = spca504B_PollingDataReady(gspca_dev);
break;
case BRIDGE_SPCA536:
spca50x_GetFirmware(gspca_dev);
- reg_r(dev, 0x00, 0x5002, gspca_dev->usb_buf, 1);
+ reg_r(gspca_dev, 0x00, 0x5002, 1);
gspca_dev->usb_buf[0] = 0;
- reg_w(dev, 0x24, 0, 0, gspca_dev->usb_buf, 1);
- reg_r(dev, 0x24, 0, gspca_dev->usb_buf, 1);
+ reg_w(gspca_dev, 0x24, 0, 0, 1);
+ reg_r(gspca_dev, 0x24, 0, 1);
rc = spca504B_PollingDataReady(gspca_dev);
- reg_w(dev, 0x34, 0, 0, NULL, 0);
+ reg_w(gspca_dev, 0x34, 0, 0, 0);
spca504B_WaitCmdStatus(gspca_dev);
break;
case BRIDGE_SPCA504C: /* pccam600 */
/* case BRIDGE_SPCA536: */
if (sd->subtype == MegapixV4 ||
sd->subtype == LogitechClickSmart820) {
- reg_w(dev, 0xf0, 0, 0, NULL, 0);
+ reg_w(gspca_dev, 0xf0, 0, 0, 0);
spca504B_WaitCmdStatus(gspca_dev);
- reg_r(dev, 0xf0, 4, NULL, 0);
+ reg_r(gspca_dev, 0xf0, 4, 0);
spca504B_WaitCmdStatus(gspca_dev);
} else {
- reg_w(dev, 0x31, 0, 4, NULL, 0);
+ reg_w(gspca_dev, 0x31, 0, 4, 0);
spca504B_WaitCmdStatus(gspca_dev);
rc = spca504B_PollingDataReady(gspca_dev);
}
/* case BRIDGE_SPCA533: */
/* case BRIDGE_SPCA536: */
/* case BRIDGE_SPCA504B: */
- reg_w(dev, 0x31, 0, 0, NULL, 0);
+ reg_w(gspca_dev, 0x31, 0, 0, 0);
spca504B_WaitCmdStatus(gspca_dev);
spca504B_PollingDataReady(gspca_dev);
break;
}
}
-static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-}
-
-static void sd_close(struct gspca_dev *gspca_dev)
-{
-}
-
static void sd_pkt_scan(struct gspca_dev *gspca_dev,
struct gspca_frame *frame, /* target */
__u8 *data, /* isoc packet */
.ctrls = sd_ctrls,
.nctrls = ARRAY_SIZE(sd_ctrls),
.config = sd_config,
- .open = sd_open,
+ .init = sd_init,
.start = sd_start,
.stopN = sd_stopN,
- .stop0 = sd_stop0,
- .close = sd_close,
.pkt_scan = sd_pkt_scan,
};
.id_table = device_table,
.probe = sd_probe,
.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+ .suspend = gspca_suspend,
+ .resume = gspca_resume,
+#endif
};
/* -- module insert / remove -- */
#define MAX_GAMMA 0x10 /* 0 to 15 */
-#define V4L2_CID_EFFECTS (V4L2_CID_PRIVATE_BASE + 3)
+#define V4L2_CID_EFFECTS (V4L2_CID_PRIVATE_BASE + 0)
MODULE_AUTHOR("Leandro Costantino <le_costantino@pixartargentina.com.ar>");
MODULE_DESCRIPTION("GSPCA/T613 (JPEG Compliance) USB Camera Driver");
static struct v4l2_pix_format vga_mode_t16[] = {
{160, 120, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
.bytesperline = 160,
- .sizeimage = 160 * 120 * 3 / 8 + 590,
+ .sizeimage = 160 * 120 * 4 / 8 + 590,
.colorspace = V4L2_COLORSPACE_JPEG,
.priv = 4},
{176, 144, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
NULL, 0, 500);
return;
}
- if (len <= sizeof gspca_dev->usb_buf) {
+ if (len <= USB_BUF_SZ) {
memcpy(gspca_dev->usb_buf, buffer, len);
usb_control_msg(gspca_dev->dev,
usb_sndctrlpipe(gspca_dev->dev, 0),
return 0;
}
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
+{
+ init_default_parameters(gspca_dev);
+ return 0;
+}
+
static void setbrightness(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
setcolors(gspca_dev);
}
-static void sd_stopN(struct gspca_dev *gspca_dev)
-{
-}
-
-static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-}
-
-static void sd_close(struct gspca_dev *gspca_dev)
-{
-}
-
static void sd_pkt_scan(struct gspca_dev *gspca_dev,
struct gspca_frame *frame, /* target */
__u8 *data, /* isoc packet */
return -EINVAL;
}
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
-{
- init_default_parameters(gspca_dev);
- return 0;
-}
-
/* sub-driver description */
static const struct sd_desc sd_desc = {
.name = MODULE_NAME,
.ctrls = sd_ctrls,
.nctrls = ARRAY_SIZE(sd_ctrls),
.config = sd_config,
- .open = sd_open,
+ .init = sd_init,
.start = sd_start,
- .stopN = sd_stopN,
- .stop0 = sd_stop0,
- .close = sd_close,
.pkt_scan = sd_pkt_scan,
.querymenu = sd_querymenu,
};
.id_table = device_table,
.probe = sd_probe,
.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+ .suspend = gspca_suspend,
+ .resume = gspca_resume,
+#endif
};
/* -- module insert / remove -- */
}
}
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
{
reg_w_1(gspca_dev, TV8532_AD_SLOPE, 0x32);
reg_w_1(gspca_dev, TV8532_AD_BITCTRL, 0x00);
reg_w_1(gspca_dev, TV8532_GPIO_OE, 0x0b);
}
-static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-}
-
-static void sd_close(struct gspca_dev *gspca_dev)
-{
-}
-
static void tv8532_preprocess(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
.ctrls = sd_ctrls,
.nctrls = ARRAY_SIZE(sd_ctrls),
.config = sd_config,
- .open = sd_open,
+ .init = sd_init,
.start = sd_start,
.stopN = sd_stopN,
- .stop0 = sd_stop0,
- .close = sd_close,
.pkt_scan = sd_pkt_scan,
};
.id_table = device_table,
.probe = sd_probe,
.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+ .suspend = gspca_suspend,
+ .resume = gspca_resume,
+#endif
};
/* -- module insert / remove -- */
.set = sd_setautogain,
.get = sd_getautogain,
},
+#define LIGHTFREQ_IDX 1
{
{
.id = V4L2_CID_POWER_LINE_FREQUENCY,
};
static struct v4l2_pix_format vc0321_mode[] = {
- {320, 240, V4L2_PIX_FMT_YUV420, V4L2_FIELD_NONE,
+ {320, 240, V4L2_PIX_FMT_YVYU, V4L2_FIELD_NONE,
.bytesperline = 320,
.sizeimage = 320 * 240 * 2,
.colorspace = V4L2_COLORSPACE_SRGB,
.priv = 1},
- {640, 480, V4L2_PIX_FMT_YUV420, V4L2_FIELD_NONE,
+ {640, 480, V4L2_PIX_FMT_YVYU, V4L2_FIELD_NONE,
.bytesperline = 640,
.sizeimage = 640 * 480 * 2,
.colorspace = V4L2_COLORSPACE_SRGB,
sd->qindex = 7;
sd->autogain = AUTOGAIN_DEF;
sd->lightfreq = FREQ_DEF;
+ if (sd->sensor != SENSOR_OV7670)
+ gspca_dev->ctrl_dis = (1 << LIGHTFREQ_IDX);
if (sd->bridge == BRIDGE_VC0321) {
reg_r(gspca_dev, 0x8a, 0, 3);
return 0;
}
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and time */
+static int sd_init(struct gspca_dev *gspca_dev)
{
return 0;
}
reg_w(dev, 0x89, 0xffff, 0xffff);
}
-/* this function is called at close time */
-static void sd_close(struct gspca_dev *gspca_dev)
-{
-/* struct usb_device *dev = gspca_dev->dev;
- __u8 buffread;
-
- reg_w(dev, 0x89, 0xffff, 0xffff);
- reg_w(dev, 0xa0, 0x01, 0xb301);
- reg_w(dev, 0xa0, 0x09, 0xb303);
- reg_w(dev, 0x89, 0xffff, 0xffff);
-*/
-}
-
static void sd_pkt_scan(struct gspca_dev *gspca_dev,
struct gspca_frame *frame, /* target */
__u8 *data, /* isoc packet */
.ctrls = sd_ctrls,
.nctrls = ARRAY_SIZE(sd_ctrls),
.config = sd_config,
- .open = sd_open,
+ .init = sd_init,
.start = sd_start,
.stopN = sd_stopN,
.stop0 = sd_stop0,
- .close = sd_close,
.pkt_scan = sd_pkt_scan,
.querymenu = sd_querymenu,
};
.id_table = device_table,
.probe = sd_probe,
.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+ .suspend = gspca_suspend,
+ .resume = gspca_resume,
+#endif
};
/* -- module insert / remove -- */
static int sd_getsharpness(struct gspca_dev *gspca_dev, __s32 *val);
static struct ctrl sd_ctrls[] = {
+#define BRIGHTNESS_IDX 0
#define SD_BRIGHTNESS 0
{
{
.set = sd_setautogain,
.get = sd_getautogain,
},
+#define LIGHTFREQ_IDX 4
#define SD_FREQ 4
{
{
case SENSOR_MC501CB:
return -1; /* don't probe */
case SENSOR_TAS5130C_VF0250:
- /* may probe but with write in reg 0x0010 */
+ /* may probe but with no write in reg 0x0010 */
return -1; /* don't probe */
+ case SENSOR_PAS106:
+ sensor = sif_probe(gspca_dev);
+ if (sensor >= 0)
+ return sensor;
+ break;
}
sensor = vga_2wr_probe(gspca_dev);
if (sensor >= 0) {
/* next probe is needed for OmniVision ? */
}
sensor2 = vga_3wr_probe(gspca_dev);
- if (sensor2 >= 0) {
- if (sensor >= 0)
- return sensor;
- return sensor2;
- }
- return sif_probe(gspca_dev);
+ if (sensor2 >= 0
+ && sensor >= 0)
+ return sensor;
+ return sensor2;
}
/* this function is called at probe time */
sd->lightfreq = sd_ctrls[SD_FREQ].qctrl.default_value;
sd->sharpness = sd_ctrls[SD_SHARPNESS].qctrl.default_value;
+ switch (sd->sensor) {
+ case SENSOR_GC0305:
+ case SENSOR_OV7620:
+ case SENSOR_PO2030:
+ gspca_dev->ctrl_dis = (1 << BRIGHTNESS_IDX);
+ break;
+ case SENSOR_HDCS2020:
+ case SENSOR_HV7131B:
+ case SENSOR_HV7131C:
+ case SENSOR_OV7630C:
+ gspca_dev->ctrl_dis = (1 << LIGHTFREQ_IDX);
+ break;
+ }
+
/* switch the led off */
reg_w(gspca_dev->dev, 0x01, 0x0000);
return 0;
}
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
{
reg_w(gspca_dev->dev, 0x01, 0x0000);
return 0;
}
}
-static void sd_stopN(struct gspca_dev *gspca_dev)
-{
-}
-
static void sd_stop0(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
send_unknown(gspca_dev->dev, sd->sensor);
}
-/* this function is called at close time */
-static void sd_close(struct gspca_dev *gspca_dev)
-{
-}
-
static void sd_pkt_scan(struct gspca_dev *gspca_dev,
struct gspca_frame *frame,
__u8 *data,
.ctrls = sd_ctrls,
.nctrls = sizeof sd_ctrls / sizeof sd_ctrls[0],
.config = sd_config,
- .open = sd_open,
+ .init = sd_init,
.start = sd_start,
- .stopN = sd_stopN,
.stop0 = sd_stop0,
- .close = sd_close,
.pkt_scan = sd_pkt_scan,
.querymenu = sd_querymenu,
};
static const __devinitdata struct usb_device_id device_table[] = {
{USB_DEVICE(0x041e, 0x041e)},
-#ifndef CONFIG_USB_ZC0301
{USB_DEVICE(0x041e, 0x4017)},
- {USB_DEVICE(0x041e, 0x401c)},
+ {USB_DEVICE(0x041e, 0x401c), .driver_info = SENSOR_PAS106},
{USB_DEVICE(0x041e, 0x401e)},
{USB_DEVICE(0x041e, 0x401f)},
-#endif
+ {USB_DEVICE(0x041e, 0x4022)},
{USB_DEVICE(0x041e, 0x4029)},
-#ifndef CONFIG_USB_ZC0301
- {USB_DEVICE(0x041e, 0x4034)},
- {USB_DEVICE(0x041e, 0x4035)},
+ {USB_DEVICE(0x041e, 0x4034), .driver_info = SENSOR_PAS106},
+ {USB_DEVICE(0x041e, 0x4035), .driver_info = SENSOR_PAS106},
{USB_DEVICE(0x041e, 0x4036)},
{USB_DEVICE(0x041e, 0x403a)},
-#endif
{USB_DEVICE(0x041e, 0x4051), .driver_info = SENSOR_TAS5130C_VF0250},
{USB_DEVICE(0x041e, 0x4053), .driver_info = SENSOR_TAS5130C_VF0250},
-#ifndef CONFIG_USB_ZC0301
{USB_DEVICE(0x0458, 0x7007)},
{USB_DEVICE(0x0458, 0x700c)},
{USB_DEVICE(0x0458, 0x700f)},
-#endif
{USB_DEVICE(0x0461, 0x0a00)},
{USB_DEVICE(0x046d, 0x08a0)},
{USB_DEVICE(0x046d, 0x08a1)},
{USB_DEVICE(0x046d, 0x08aa)},
{USB_DEVICE(0x046d, 0x08ac)},
{USB_DEVICE(0x046d, 0x08ad)},
-#ifndef CONFIG_USB_ZC0301
+#if !defined CONFIG_USB_ZC0301 && !defined CONFIG_USB_ZC0301_MODULE
{USB_DEVICE(0x046d, 0x08ae)},
#endif
{USB_DEVICE(0x046d, 0x08af)},
{USB_DEVICE(0x046d, 0x08d8)},
{USB_DEVICE(0x046d, 0x08da)},
{USB_DEVICE(0x046d, 0x08dd), .driver_info = SENSOR_MC501CB},
- {USB_DEVICE(0x0471, 0x0325)},
- {USB_DEVICE(0x0471, 0x0326)},
- {USB_DEVICE(0x0471, 0x032d)},
- {USB_DEVICE(0x0471, 0x032e)},
+ {USB_DEVICE(0x0471, 0x0325), .driver_info = SENSOR_PAS106},
+ {USB_DEVICE(0x0471, 0x0326), .driver_info = SENSOR_PAS106},
+ {USB_DEVICE(0x0471, 0x032d), .driver_info = SENSOR_PAS106},
+ {USB_DEVICE(0x0471, 0x032e), .driver_info = SENSOR_PAS106},
{USB_DEVICE(0x055f, 0xc005)},
-#ifndef CONFIG_USB_ZC0301
{USB_DEVICE(0x055f, 0xd003)},
{USB_DEVICE(0x055f, 0xd004)},
-#endif
{USB_DEVICE(0x0698, 0x2003)},
+ {USB_DEVICE(0x0ac8, 0x0301), .driver_info = SENSOR_PAS106},
{USB_DEVICE(0x0ac8, 0x0302)},
-#ifndef CONFIG_USB_ZC0301
{USB_DEVICE(0x0ac8, 0x301b)},
+#if !defined CONFIG_USB_ZC0301 && !defined CONFIG_USB_ZC0301_MODULE
{USB_DEVICE(0x0ac8, 0x303b)},
#endif
{USB_DEVICE(0x0ac8, 0x305b), .driver_info = SENSOR_TAS5130C_VF0250},
-#ifndef CONFIG_USB_ZC0301
{USB_DEVICE(0x0ac8, 0x307b)},
{USB_DEVICE(0x10fd, 0x0128)},
+ {USB_DEVICE(0x10fd, 0x804d)},
{USB_DEVICE(0x10fd, 0x8050)},
-#endif
{} /* end of entry */
};
#undef DVNAME
.id_table = device_table,
.probe = sd_probe,
.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+ .suspend = gspca_suspend,
+ .resume = gspca_resume,
+#endif
};
static int __init sd_mod_init(void)
spin_lock_init(&itv->lock);
spin_lock_init(&itv->dma_reg_lock);
- itv->irq_work_queues = create_workqueue(itv->name);
+ itv->irq_work_queues = create_singlethread_workqueue(itv->name);
if (itv->irq_work_queues == NULL) {
IVTV_ERR("Could not create ivtv workqueue\n");
return -1;
#define IVTV_F_I_DEC_PAUSED 20 /* the decoder is paused */
#define IVTV_F_I_INITED 21 /* set after first open */
#define IVTV_F_I_FAILED 22 /* set if first open failed */
+#define IVTV_F_I_WORK_INITED 23 /* worker thread was initialized */
/* Event notifications */
#define IVTV_F_I_EV_DEC_STOPPED 28 /* decoder stopped event */
DEFINE_WAIT(wait);
+ if (test_and_clear_bit(IVTV_F_I_WORK_INITED, &itv->i_flags)) {
+ struct sched_param param = { .sched_priority = 99 };
+
+ /* This thread must use the FIFO scheduler as it
+ is realtime sensitive. */
+ sched_setscheduler(current, SCHED_FIFO, ¶m);
+ }
if (test_and_clear_bit(IVTV_F_I_WORK_HANDLER_PIO, &itv->i_flags))
ivtv_pio_work_handler(itv);
static void ivtv_irq_enc_vbi_cap(struct ivtv *itv)
{
- struct ivtv_stream *s_mpg = &itv->streams[IVTV_ENC_STREAM_TYPE_MPG];
u32 data[CX2341X_MBOX_MAX_DATA];
struct ivtv_stream *s;
IVTV_DEBUG_HI_IRQ("ENC START VBI CAP\n");
s = &itv->streams[IVTV_ENC_STREAM_TYPE_VBI];
- /* If more than two VBI buffers are pending, then
- clear the old ones and start with this new one.
- This can happen during transition stages when MPEG capturing is
- started, but the first interrupts haven't arrived yet. During
- that period VBI requests can accumulate without being able to
- DMA the data. Since at most four VBI DMA buffers are available,
- we just drop the old requests when there are already three
- requests queued. */
- if (s->sg_pending_size > 2) {
- struct ivtv_buffer *buf;
- list_for_each_entry(buf, &s->q_predma.list, list)
- ivtv_buf_sync_for_cpu(s, buf);
- ivtv_queue_move(s, &s->q_predma, NULL, &s->q_free, 0);
- s->sg_pending_size = 0;
- }
- /* if we can append the data, and the MPEG stream isn't capturing,
- then start a DMA request for just the VBI data. */
- if (!stream_enc_dma_append(s, data) &&
- !test_bit(IVTV_F_S_STREAMING, &s_mpg->s_flags)) {
+ if (!stream_enc_dma_append(s, data))
set_bit(ivtv_use_pio(s) ? IVTV_F_S_PIO_PENDING : IVTV_F_S_DMA_PENDING, &s->s_flags);
- }
}
static void ivtv_irq_dec_vbi_reinsert(struct ivtv *itv)
#define IVTV_QUEUE_H
#define IVTV_DMA_UNMAPPED ((u32) -1)
-#define SLICED_VBI_PIO 1
+#define SLICED_VBI_PIO 0
/* ivtv_buffer utility functions */
/* Every X number of frames a VBI interrupt arrives (frames as in 25 or 30 fps) */
data[1] = 1;
/* The VBI frames are stored in a ringbuffer with this size (with a VBI frame as unit) */
- data[2] = raw ? 4 : 8;
+ data[2] = raw ? 4 : 4 * (itv->vbi.raw_size / itv->vbi.enc_size);
/* The start/stop codes determine which VBI lines end up in the raw VBI data area.
The codes are from table 24 in the saa7115 datasheet. Each raw/sliced/video line
is framed with codes FF0000XX where XX is the SAV/EAV (Start/End of Active Video)
u32 line_size = itv->vbi.sliced_decoder_line_size;
struct v4l2_decode_vbi_line vbi;
int i;
+ unsigned lines = 0;
/* find the first valid line */
for (i = 0; i < size; i++, buf++) {
}
vbi.p = p + 4;
itv->video_dec_func(itv, VIDIOC_INT_DECODE_VBI_LINE, &vbi);
- if (vbi.type) {
+ if (vbi.type && !(lines & (1 << vbi.line))) {
+ lines |= 1 << vbi.line;
itv->vbi.sliced_data[line].id = vbi.type;
itv->vbi.sliced_data[line].field = vbi.is_second_field;
itv->vbi.sliced_data[line].line = vbi.line;
#define IVTV_DRIVER_NAME "ivtv"
#define IVTV_DRIVER_VERSION_MAJOR 1
-#define IVTV_DRIVER_VERSION_MINOR 3
+#define IVTV_DRIVER_VERSION_MINOR 4
#define IVTV_DRIVER_VERSION_PATCHLEVEL 0
#define IVTV_VERSION __stringify(IVTV_DRIVER_VERSION_MAJOR) "." __stringify(IVTV_DRIVER_VERSION_MINOR) "." __stringify(IVTV_DRIVER_VERSION_PATCHLEVEL)
case DECODER_ENABLE_OUTPUT:
{
+ int enable;
- int *iarg = arg;
- int enable = (*iarg != 0);
- if (enable) {
- dprintk("ks0127: command "
+ iarg = arg;
+ enable = (*iarg != 0);
+ if (enable) {
+ dprintk("ks0127: command "
"DECODER_ENABLE_OUTPUT on "
"(%d)\n", enable);
- /* All output pins on */
- ks0127_and_or(ks, KS_OFMTA, 0xcf, 0x30);
- /* Obey the OEN pin */
- ks0127_and_or(ks, KS_CDEM, 0x7f, 0x00);
- } else {
- dprintk("ks0127: command "
+ /* All output pins on */
+ ks0127_and_or(ks, KS_OFMTA, 0xcf, 0x30);
+ /* Obey the OEN pin */
+ ks0127_and_or(ks, KS_CDEM, 0x7f, 0x00);
+ } else {
+ dprintk("ks0127: command "
"DECODER_ENABLE_OUTPUT off "
"(%d)\n", enable);
- /* Video output pins off */
- ks0127_and_or(ks, KS_OFMTA, 0xcf, 0x00);
- /* Ignore the OEN pin */
- ks0127_and_or(ks, KS_CDEM, 0x7f, 0x80);
- }
+ /* Video output pins off */
+ ks0127_and_or(ks, KS_OFMTA, 0xcf, 0x00);
+ /* Ignore the OEN pin */
+ ks0127_and_or(ks, KS_CDEM, 0x7f, 0x80);
+ }
}
break;
memcpy(meye.video_dev, &meye_template, sizeof(meye_template));
meye.video_dev->parent = &meye.mchip_dev->dev;
+ ret = -EIO;
if ((ret = sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERA, 1))) {
printk(KERN_ERR "meye: unable to power on the camera\n");
printk(KERN_ERR "meye: did you enable the camera in "
goto outsonypienable;
}
- ret = -EIO;
if ((ret = pci_enable_device(meye.mchip_dev))) {
printk(KERN_ERR "meye: pci_enable_device failed\n");
goto outenabledev;
return 0;
}
-static int std_callback(struct saa7146_dev* dev, struct saa7146_standard *std)
+static int std_callback(struct saa7146_dev *dev, struct saa7146_standard *standard)
{
- struct mxb* mxb = (struct mxb*)dev->ext_priv;
+ struct mxb *mxb = (struct mxb *)dev->ext_priv;
int zero = 0;
int one = 1;
- if(V4L2_STD_PAL_I == std->id ) {
+ if (V4L2_STD_PAL_I == standard->id) {
v4l2_std_id std = V4L2_STD_PAL_I;
+
DEB_D(("VIDIOC_S_STD: setting mxb for PAL_I.\n"));
/* set the 7146 gpio register -- I don't know what this does exactly */
saa7146_write(dev, GPIO_CTRL, 0x00404050);
/* unset the 7111 gpio register -- I don't know what this does exactly */
- mxb->saa7111a->driver->command(mxb->saa7111a,DECODER_SET_GPIO, &zero);
+ mxb->saa7111a->driver->command(mxb->saa7111a, DECODER_SET_GPIO, &zero);
mxb->tuner->driver->command(mxb->tuner, VIDIOC_S_STD, &std);
} else {
v4l2_std_id std = V4L2_STD_PAL_BG;
+
DEB_D(("VIDIOC_S_STD: setting mxb for PAL/NTSC/SECAM.\n"));
/* set the 7146 gpio register -- I don't know what this does exactly */
saa7146_write(dev, GPIO_CTRL, 0x00404050);
/* set the 7111 gpio register -- I don't know what this does exactly */
- mxb->saa7111a->driver->command(mxb->saa7111a,DECODER_SET_GPIO, &one);
+ mxb->saa7111a->driver->command(mxb->saa7111a, DECODER_SET_GPIO, &one);
mxb->tuner->driver->command(mxb->tuner, VIDIOC_S_STD, &std);
}
return 0;
break;
/* Retry until idle */
- do
+ do {
rc = reg_r(ov, R511_I2C_CTL);
- while (rc > 0 && ((rc&1) == 0));
+ } while (rc > 0 && ((rc&1) == 0));
if (rc < 0)
break;
return rc;
/* Retry until idle */
- do
- rc = reg_r(ov, R511_I2C_CTL);
- while (rc > 0 && ((rc&1) == 0));
+ do {
+ rc = reg_r(ov, R511_I2C_CTL);
+ } while (rc > 0 && ((rc & 1) == 0));
if (rc < 0)
return rc;
return rc;
/* Retry until idle */
- do
+ do {
rc = reg_r(ov, R511_I2C_CTL);
- while (rc > 0 && ((rc&1) == 0));
+ } while (rc > 0 && ((rc&1) == 0));
if (rc < 0)
return rc;
* Initialization and module stuff
*/
+#ifndef MODULE
+static int enable;
+module_param(enable, int, 0);
+#endif
+
static int __init init_pms_cards(void)
{
printk(KERN_INFO "Mediavision Pro Movie Studio driver 0.02\n");
+#ifndef MODULE
+ if (!enable) {
+ printk(KERN_INFO "PMS: not enabled, use pms.enable=1 to "
+ "probe\n");
+ return -ENODEV;
+ }
+#endif
+
data_port = io_port +1;
if(init_mediavision())
case VIDIOCPWCGVIDCMD:
{
- ARG_DEF(struct pwc_video_command, cmd);
-
- ARGR(cmd).type = pdev->type;
- ARGR(cmd).release = pdev->release;
- ARGR(cmd).command_len = pdev->cmd_len;
- memcpy(&ARGR(cmd).command_buf, pdev->cmd_buf, pdev->cmd_len);
- ARGR(cmd).bandlength = pdev->vbandlength;
- ARGR(cmd).frame_size = pdev->frame_size;
- ARG_OUT(cmd)
+ ARG_DEF(struct pwc_video_command, vcmd);
+
+ ARGR(vcmd).type = pdev->type;
+ ARGR(vcmd).release = pdev->release;
+ ARGR(vcmd).command_len = pdev->cmd_len;
+ memcpy(&ARGR(vcmd).command_buf, pdev->cmd_buf, pdev->cmd_len);
+ ARGR(vcmd).bandlength = pdev->vbandlength;
+ ARGR(vcmd).frame_size = pdev->frame_size;
+ ARG_OUT(vcmd)
break;
}
/*
client->addr << 1, client->adapter->name);
state = kzalloc(sizeof(struct saa711x_state), GFP_KERNEL);
- i2c_set_clientdata(client, state);
- if (state == NULL) {
+ if (state == NULL)
return -ENOMEM;
- }
+ i2c_set_clientdata(client, state);
state->input = -1;
state->output = SAA7115_IPORT_ON;
state->enable = 1;
mutex_init(&se401->lock);
wmb();
- if (video_register_device(&se401->vdev, VFL_TYPE_GRABBER, video_nr) == -1) {
+ if (video_register_device(&se401->vdev, VFL_TYPE_GRABBER, video_nr) < 0) {
kfree(se401);
err("video_register_device failed");
return -EIO;
cam->v4ldev->fops = &sn9c102_fops;
cam->v4ldev->minor = video_nr[dev_nr];
cam->v4ldev->release = video_device_release;
+ cam->v4ldev->parent = &udev->dev;
init_completion(&cam->probe);
static const struct usb_device_id sn9c102_id_table[] = {
/* SN9C101 and SN9C102 */
+#if !defined CONFIG_USB_GSPCA && !defined CONFIG_USB_GSPCA_MODULE
{ SN9C102_USB_DEVICE(0x0c45, 0x6001, BRIDGE_SN9C102), },
{ SN9C102_USB_DEVICE(0x0c45, 0x6005, BRIDGE_SN9C102), },
+#endif
{ SN9C102_USB_DEVICE(0x0c45, 0x6007, BRIDGE_SN9C102), },
{ SN9C102_USB_DEVICE(0x0c45, 0x6009, BRIDGE_SN9C102), },
{ SN9C102_USB_DEVICE(0x0c45, 0x600d, BRIDGE_SN9C102), },
+/* { SN9C102_USB_DEVICE(0x0c45, 0x6011, BRIDGE_SN9C102), }, OV6650 */
{ SN9C102_USB_DEVICE(0x0c45, 0x6019, BRIDGE_SN9C102), },
{ SN9C102_USB_DEVICE(0x0c45, 0x6024, BRIDGE_SN9C102), },
{ SN9C102_USB_DEVICE(0x0c45, 0x6025, BRIDGE_SN9C102), },
{ SN9C102_USB_DEVICE(0x0c45, 0x602a, BRIDGE_SN9C102), },
{ SN9C102_USB_DEVICE(0x0c45, 0x602b, BRIDGE_SN9C102), },
{ SN9C102_USB_DEVICE(0x0c45, 0x602c, BRIDGE_SN9C102), },
- { SN9C102_USB_DEVICE(0x0c45, 0x602d, BRIDGE_SN9C102), },
+/* { SN9C102_USB_DEVICE(0x0c45, 0x602d, BRIDGE_SN9C102), }, HV7131R */
{ SN9C102_USB_DEVICE(0x0c45, 0x602e, BRIDGE_SN9C102), },
{ SN9C102_USB_DEVICE(0x0c45, 0x6030, BRIDGE_SN9C102), },
/* SN9C103 */
{ SN9C102_USB_DEVICE(0x0c45, 0x6080, BRIDGE_SN9C103), },
{ SN9C102_USB_DEVICE(0x0c45, 0x6082, BRIDGE_SN9C103), },
- { SN9C102_USB_DEVICE(0x0c45, 0x6083, BRIDGE_SN9C103), },
+/* { SN9C102_USB_DEVICE(0x0c45, 0x6083, BRIDGE_SN9C103), }, HY7131D/E */
{ SN9C102_USB_DEVICE(0x0c45, 0x6088, BRIDGE_SN9C103), },
{ SN9C102_USB_DEVICE(0x0c45, 0x608a, BRIDGE_SN9C103), },
{ SN9C102_USB_DEVICE(0x0c45, 0x608b, BRIDGE_SN9C103), },
{ SN9C102_USB_DEVICE(0x0c45, 0x608c, BRIDGE_SN9C103), },
- { SN9C102_USB_DEVICE(0x0c45, 0x608e, BRIDGE_SN9C103), },
+/* { SN9C102_USB_DEVICE(0x0c45, 0x608e, BRIDGE_SN9C103), }, CISVF10 */
+#if !defined CONFIG_USB_GSPCA && !defined CONFIG_USB_GSPCA_MODULE
{ SN9C102_USB_DEVICE(0x0c45, 0x608f, BRIDGE_SN9C103), },
+#endif
{ SN9C102_USB_DEVICE(0x0c45, 0x60a0, BRIDGE_SN9C103), },
{ SN9C102_USB_DEVICE(0x0c45, 0x60a2, BRIDGE_SN9C103), },
{ SN9C102_USB_DEVICE(0x0c45, 0x60a3, BRIDGE_SN9C103), },
- { SN9C102_USB_DEVICE(0x0c45, 0x60a8, BRIDGE_SN9C103), },
- { SN9C102_USB_DEVICE(0x0c45, 0x60aa, BRIDGE_SN9C103), },
- { SN9C102_USB_DEVICE(0x0c45, 0x60ab, BRIDGE_SN9C103), },
+/* { SN9C102_USB_DEVICE(0x0c45, 0x60a8, BRIDGE_SN9C103), }, PAS106 */
+/* { SN9C102_USB_DEVICE(0x0c45, 0x60aa, BRIDGE_SN9C103), }, TAS5130 */
+/* { SN9C102_USB_DEVICE(0x0c45, 0x60ab, BRIDGE_SN9C103), }, TAS5130 */
{ SN9C102_USB_DEVICE(0x0c45, 0x60ac, BRIDGE_SN9C103), },
{ SN9C102_USB_DEVICE(0x0c45, 0x60ae, BRIDGE_SN9C103), },
{ SN9C102_USB_DEVICE(0x0c45, 0x60af, BRIDGE_SN9C103), },
+#if !defined CONFIG_USB_GSPCA && !defined CONFIG_USB_GSPCA_MODULE
{ SN9C102_USB_DEVICE(0x0c45, 0x60b0, BRIDGE_SN9C103), },
+#endif
{ SN9C102_USB_DEVICE(0x0c45, 0x60b2, BRIDGE_SN9C103), },
{ SN9C102_USB_DEVICE(0x0c45, 0x60b3, BRIDGE_SN9C103), },
{ SN9C102_USB_DEVICE(0x0c45, 0x60b8, BRIDGE_SN9C103), },
{ SN9C102_USB_DEVICE(0x0c45, 0x6108, BRIDGE_SN9C120), },
{ SN9C102_USB_DEVICE(0x0c45, 0x610f, BRIDGE_SN9C120), },
{ SN9C102_USB_DEVICE(0x0c45, 0x6130, BRIDGE_SN9C120), },
- { SN9C102_USB_DEVICE(0x0c45, 0x6138, BRIDGE_SN9C120), },
+/* { SN9C102_USB_DEVICE(0x0c45, 0x6138, BRIDGE_SN9C120), }, MO8000 */
{ SN9C102_USB_DEVICE(0x0c45, 0x613a, BRIDGE_SN9C120), },
{ SN9C102_USB_DEVICE(0x0c45, 0x613b, BRIDGE_SN9C120), },
{ SN9C102_USB_DEVICE(0x0c45, 0x613c, BRIDGE_SN9C120), },
mutex_init (&stv680->lock);
wmb ();
- if (video_register_device (stv680->vdev, VFL_TYPE_GRABBER, video_nr) == -1) {
+ if (video_register_device(stv680->vdev, VFL_TYPE_GRABBER, video_nr) < 0) {
PDEBUG (0, "STV(e): video_register_device failed");
retval = -EIO;
goto error_vdev;
* make black color and quit the horizontal scanning loop.
*/
if (((frame->curline + 2) >= scanHeight) || (i >= scanLength)) {
- const int j = i * V4L_BYTES_PER_PIXEL;
+ const int offset = i * V4L_BYTES_PER_PIXEL;
#if USES_IBMCAM_PUTPIXEL
/* Refresh 'f' because we don't use it much with PUTPIXEL */
- f = frame->data + (v4l_linesize * frame->curline) + j;
+ f = frame->data + (v4l_linesize * frame->curline) + offset;
#endif
- memset(f, 0, v4l_linesize - j);
+ memset(f, 0, v4l_linesize - offset);
break;
}
cam->udev = dev;
cam->bulkEndpoint = bulkEndpoint;
- if (video_register_device(&cam->vdev, VFL_TYPE_GRABBER, -1) == -1) {
+ if (video_register_device(&cam->vdev, VFL_TYPE_GRABBER, -1) < 0) {
kfree(cam);
printk(KERN_WARNING "video_register_device failed\n");
return -EIO;
int ret;
char *name_base;
+ if (vfd == NULL)
+ return -EINVAL;
+
switch (type) {
case VFL_TYPE_GRABBER:
base = MINOR_VFL_TYPE_GRABBER_MIN;
default:
printk(KERN_ERR "%s called with unknown type: %d\n",
__func__, type);
- return -1;
+ return -EINVAL;
}
/* pick a minor number */
p->timestamp.tv_sec / 3600,
(int)(p->timestamp.tv_sec / 60) % 60,
(int)(p->timestamp.tv_sec % 60),
- p->timestamp.tv_usec,
+ (long)p->timestamp.tv_usec,
p->index,
prt_names(p->type, v4l2_type_names),
p->bytesused, p->flags,
__video_do_ioctl will be called again, with one or more
V4L2 ioctls.
********************************************************/
- if (_IOC_TYPE(cmd) == 'v')
+ if (_IOC_TYPE(cmd) == 'v' && _IOC_NR(cmd) < BASE_VIDIOCPRIVATE)
return v4l_compat_translate_ioctl(inode, file, cmd, arg,
__video_do_ioctl);
#endif
dev = list_entry(list, struct vivi_dev, vivi_devlist);
if (-1 != dev->vfd->minor) {
- video_unregister_device(dev->vfd);
- printk(KERN_INFO "%s: /dev/video%d unregistered.\n",
+ printk(KERN_INFO "%s: unregistering /dev/video%d\n",
VIVI_MODULE_NAME, dev->vfd->minor);
+ video_unregister_device(dev->vfd);
} else {
- video_device_release(dev->vfd);
- printk(KERN_INFO "%s: /dev/video%d released.\n",
+ printk(KERN_INFO "%s: releasing /dev/video%d\n",
VIVI_MODULE_NAME, dev->vfd->minor);
+ video_device_release(dev->vfd);
}
kfree(dev);
Initialization and module stuff
------------------------------------------------------------------*/
+/* This routine allocates from 1 to n_devs virtual drivers.
+
+ The real maximum number of virtual drivers will depend on how many drivers
+ will succeed. This is limited to the maximum number of devices that
+ videodev supports. Since there are 64 minors for video grabbers, this is
+ currently the theoretical maximum limit. However, a further limit does
+ exist at videodev that forbids any driver to register more than 32 video
+ grabbers.
+ */
static int __init vivi_init(void)
{
int ret = -ENOMEM, i;
struct vivi_dev *dev;
struct video_device *vfd;
+ if (n_devs <= 0)
+ n_devs = 1;
+
for (i = 0; i < n_devs; i++) {
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
- if (NULL == dev)
+ if (!dev)
break;
- list_add_tail(&dev->vivi_devlist, &vivi_devlist);
-
/* init video dma queues */
INIT_LIST_HEAD(&dev->vidq.active);
init_waitqueue_head(&dev->vidq.wq);
mutex_init(&dev->mutex);
vfd = video_device_alloc();
- if (NULL == vfd)
+ if (!vfd) {
+ kfree(dev);
break;
+ }
*vfd = vivi_template;
ret = video_register_device(vfd, VFL_TYPE_GRABBER, video_nr);
- if (ret < 0)
+ if (ret < 0) {
+ video_device_release(vfd);
+ kfree(dev);
+
+ /* If some registers succeeded, keep driver */
+ if (i)
+ ret = 0;
+
break;
+ }
+
+ /* Now that everything is fine, let's add it to device list */
+ list_add_tail(&dev->vivi_devlist, &vivi_devlist);
snprintf(vfd->name, sizeof(vfd->name), "%s (%i)",
vivi_template.name, vfd->minor);
if (ret < 0) {
vivi_release();
printk(KERN_INFO "Error %d while loading vivi driver\n", ret);
- } else
+ } else {
printk(KERN_INFO "Video Technology Magazine Virtual Video "
"Capture Board ver %u.%u.%u successfully loaded.\n",
(VIVI_VERSION >> 16) & 0xFF, (VIVI_VERSION >> 8) & 0xFF,
VIVI_VERSION & 0xFF);
+
+ /* n_devs will reflect the actual number of allocated devices */
+ n_devs = i;
+ }
+
return ret;
}
MODULE_AUTHOR("Mauro Carvalho Chehab, Ted Walther and John Sokol");
MODULE_LICENSE("Dual BSD/GPL");
-module_param(video_nr, int, 0);
+module_param(video_nr, uint, 0444);
MODULE_PARM_DESC(video_nr, "video iminor start number");
-module_param(n_devs, int, 0);
+module_param(n_devs, uint, 0444);
MODULE_PARM_DESC(n_devs, "number of video devices to create");
module_param_named(debug, vivi_template.debug, int, 0444);
memcpy(&cam->vdev, &w9966_template, sizeof(struct video_device));
cam->vdev.priv = cam;
- if (video_register_device(&cam->vdev, VFL_TYPE_GRABBER, video_nr) == -1)
+ if (video_register_device(&cam->vdev, VFL_TYPE_GRABBER, video_nr) < 0)
return -1;
w9966_setState(cam, W9966_STATE_VDEV, W9966_STATE_VDEV);
cam->v4ldev->fops = &zc0301_fops;
cam->v4ldev->minor = video_nr[dev_nr];
cam->v4ldev->release = video_device_release;
+ cam->v4ldev->parent = &udev->dev;
video_set_drvdata(cam->v4ldev, cam);
init_completion(&cam->probe);
#define ZC0301_ID_TABLE \
static const struct usb_device_id zc0301_id_table[] = { \
- { ZC0301_USB_DEVICE(0x041e, 0x4017, 0xff), }, /* ICM105 */ \
- { ZC0301_USB_DEVICE(0x041e, 0x401c, 0xff), }, /* PAS106 */ \
- { ZC0301_USB_DEVICE(0x041e, 0x401e, 0xff), }, /* HV7131 */ \
- { ZC0301_USB_DEVICE(0x041e, 0x401f, 0xff), }, /* TAS5130 */ \
- { ZC0301_USB_DEVICE(0x041e, 0x4022, 0xff), }, \
- { ZC0301_USB_DEVICE(0x041e, 0x4034, 0xff), }, /* PAS106 */ \
- { ZC0301_USB_DEVICE(0x041e, 0x4035, 0xff), }, /* PAS106 */ \
- { ZC0301_USB_DEVICE(0x041e, 0x4036, 0xff), }, /* HV7131 */ \
- { ZC0301_USB_DEVICE(0x041e, 0x403a, 0xff), }, /* HV7131 */ \
- { ZC0301_USB_DEVICE(0x0458, 0x7007, 0xff), }, /* TAS5130 */ \
- { ZC0301_USB_DEVICE(0x0458, 0x700c, 0xff), }, /* TAS5130 */ \
- { ZC0301_USB_DEVICE(0x0458, 0x700f, 0xff), }, /* TAS5130 */ \
{ ZC0301_USB_DEVICE(0x046d, 0x08ae, 0xff), }, /* PAS202 */ \
- { ZC0301_USB_DEVICE(0x055f, 0xd003, 0xff), }, /* TAS5130 */ \
- { ZC0301_USB_DEVICE(0x055f, 0xd004, 0xff), }, /* TAS5130 */ \
- { ZC0301_USB_DEVICE(0x0ac8, 0x0301, 0xff), }, \
- { ZC0301_USB_DEVICE(0x0ac8, 0x301b, 0xff), }, /* PB-0330/HV7131 */ \
{ ZC0301_USB_DEVICE(0x0ac8, 0x303b, 0xff), }, /* PB-0330 */ \
- { ZC0301_USB_DEVICE(0x10fd, 0x0128, 0xff), }, /* TAS5130 */ \
- { ZC0301_USB_DEVICE(0x10fd, 0x8050, 0xff), }, /* TAS5130 */ \
- { ZC0301_USB_DEVICE(0x10fd, 0x804e, 0xff), }, /* TAS5130 */ \
{ } \
};
return 0;
error_debugfs:
- remove_debugfs();
+ remove_debugfs();
return -ENOMEM;
}
static void __exit acer_wmi_exit(void)
{
remove_sysfs(acer_platform_device);
+ remove_debugfs();
platform_device_del(acer_platform_device);
platform_driver_unregister(&acer_platform_driver);
DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK S6410"),
},
.callback = dmi_check_cb_s6410},
+ {
+ .ident = "FUJITSU LifeBook P8010",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook P8010"),
+ },
+ .callback = dmi_check_cb_s6410},
{}
};
#define HPWMI_ALS_QUERY 0x3
#define HPWMI_DOCK_QUERY 0x4
#define HPWMI_WIRELESS_QUERY 0x5
+#define HPWMI_HOTKEY_QUERY 0xc
static int __init hp_wmi_bios_setup(struct platform_device *device);
static int __exit hp_wmi_bios_remove(struct platform_device *device);
struct key_entry {
char type; /* See KE_* below */
- u8 code;
+ u16 code;
u16 keycode;
};
{KE_SW, 0x01, SW_DOCK},
{KE_KEY, 0x02, KEY_BRIGHTNESSUP},
{KE_KEY, 0x03, KEY_BRIGHTNESSDOWN},
- {KE_KEY, 0x04, KEY_HELP},
+ {KE_KEY, 0x20e6, KEY_PROG1},
+ {KE_KEY, 0x2142, KEY_MEDIA},
+ {KE_KEY, 0x231b, KEY_HELP},
{KE_END, 0}
};
int wireless = hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 0, 0);
if (wireless & 0x100)
- return 1;
+ return RFKILL_STATE_UNBLOCKED;
else
- return 0;
+ return RFKILL_STATE_SOFT_BLOCKED;
}
static int hp_wmi_bluetooth_state(void)
int wireless = hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 0, 0);
if (wireless & 0x10000)
- return 1;
+ return RFKILL_STATE_UNBLOCKED;
else
- return 0;
+ return RFKILL_STATE_SOFT_BLOCKED;
}
static int hp_wmi_wwan_state(void)
int wireless = hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 0, 0);
if (wireless & 0x1000000)
- return 1;
+ return RFKILL_STATE_UNBLOCKED;
else
- return 0;
+ return RFKILL_STATE_SOFT_BLOCKED;
}
static ssize_t show_display(struct device *dev, struct device_attribute *attr,
if (obj && obj->type == ACPI_TYPE_BUFFER && obj->buffer.length == 8) {
int eventcode = *((u8 *) obj->buffer.pointer);
+ if (eventcode == 0x4)
+ eventcode = hp_wmi_perform_query(HPWMI_HOTKEY_QUERY, 0,
+ 0);
key = hp_wmi_get_entry_by_scancode(eventcode);
if (key) {
switch (key->type) {
}
} else if (eventcode == 0x5) {
if (wifi_rfkill)
- wifi_rfkill->state = hp_wmi_wifi_state();
+ rfkill_force_state(wifi_rfkill,
+ hp_wmi_wifi_state());
if (bluetooth_rfkill)
- bluetooth_rfkill->state =
- hp_wmi_bluetooth_state();
+ rfkill_force_state(bluetooth_rfkill,
+ hp_wmi_bluetooth_state());
if (wwan_rfkill)
- wwan_rfkill->state = hp_wmi_wwan_state();
+ rfkill_force_state(wwan_rfkill,
+ hp_wmi_wwan_state());
} else
printk(KERN_INFO "HP WMI: Unknown key pressed - %x\n",
eventcode);
static int __init hp_wmi_bios_setup(struct platform_device *device)
{
int err;
+ int wireless = hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 0, 0);
err = device_create_file(&device->dev, &dev_attr_display);
if (err)
if (err)
goto add_sysfs_error;
- wifi_rfkill = rfkill_allocate(&device->dev, RFKILL_TYPE_WLAN);
- wifi_rfkill->name = "hp-wifi";
- wifi_rfkill->state = hp_wmi_wifi_state();
- wifi_rfkill->toggle_radio = hp_wmi_wifi_set;
- wifi_rfkill->user_claim_unsupported = 1;
-
- bluetooth_rfkill = rfkill_allocate(&device->dev,
- RFKILL_TYPE_BLUETOOTH);
- bluetooth_rfkill->name = "hp-bluetooth";
- bluetooth_rfkill->state = hp_wmi_bluetooth_state();
- bluetooth_rfkill->toggle_radio = hp_wmi_bluetooth_set;
- bluetooth_rfkill->user_claim_unsupported = 1;
-
- wwan_rfkill = rfkill_allocate(&device->dev, RFKILL_TYPE_WIMAX);
- wwan_rfkill->name = "hp-wwan";
- wwan_rfkill->state = hp_wmi_wwan_state();
- wwan_rfkill->toggle_radio = hp_wmi_wwan_set;
- wwan_rfkill->user_claim_unsupported = 1;
-
- rfkill_register(wifi_rfkill);
- rfkill_register(bluetooth_rfkill);
- rfkill_register(wwan_rfkill);
+ if (wireless & 0x1) {
+ wifi_rfkill = rfkill_allocate(&device->dev, RFKILL_TYPE_WLAN);
+ wifi_rfkill->name = "hp-wifi";
+ wifi_rfkill->state = hp_wmi_wifi_state();
+ wifi_rfkill->toggle_radio = hp_wmi_wifi_set;
+ wifi_rfkill->user_claim_unsupported = 1;
+ rfkill_register(wifi_rfkill);
+ }
+
+ if (wireless & 0x2) {
+ bluetooth_rfkill = rfkill_allocate(&device->dev,
+ RFKILL_TYPE_BLUETOOTH);
+ bluetooth_rfkill->name = "hp-bluetooth";
+ bluetooth_rfkill->state = hp_wmi_bluetooth_state();
+ bluetooth_rfkill->toggle_radio = hp_wmi_bluetooth_set;
+ bluetooth_rfkill->user_claim_unsupported = 1;
+ rfkill_register(bluetooth_rfkill);
+ }
+
+ if (wireless & 0x4) {
+ wwan_rfkill = rfkill_allocate(&device->dev, RFKILL_TYPE_WWAN);
+ wwan_rfkill->name = "hp-wwan";
+ wwan_rfkill->state = hp_wmi_wwan_state();
+ wwan_rfkill->toggle_radio = hp_wmi_wwan_set;
+ wwan_rfkill->user_claim_unsupported = 1;
+ rfkill_register(wwan_rfkill);
+ }
return 0;
add_sysfs_error:
{
cleanup_sysfs(device);
- rfkill_unregister(wifi_rfkill);
- rfkill_unregister(bluetooth_rfkill);
- rfkill_unregister(wwan_rfkill);
+ if (wifi_rfkill)
+ rfkill_unregister(wifi_rfkill);
+ if (bluetooth_rfkill)
+ rfkill_unregister(bluetooth_rfkill);
+ if (wwan_rfkill)
+ rfkill_unregister(wwan_rfkill);
return 0;
}
.read = wan_read,
.write = wan_write,
.exit = wan_exit,
- .flags.experimental = 1,
};
/*************************************************************************
check_disk_change(inode->i_bdev);
ret = 0;
- if ((filp->f_mode & FMODE_WRITE) && md->read_only)
+ if ((filp->f_mode & FMODE_WRITE) && md->read_only) {
+ mmc_blk_put(md);
ret = -EROFS;
+ }
}
return ret;
if (cpu_is_at91sam9260 () || cpu_is_at91sam9263())
if (host->total_length < 12)
host->total_length = 12;
- host->buffer = dma_alloc_coherent(NULL,
- host->total_length,
- &host->physical_address, GFP_KERNEL);
+
+ host->buffer = kmalloc(host->total_length, GFP_KERNEL);
+ if (!host->buffer) {
+ pr_debug("Can't alloc tx buffer\n");
+ cmd->error = -ENOMEM;
+ mmc_request_done(host->mmc, host->request);
+ return;
+ }
at91_mci_sg_to_dma(host, data);
+ host->physical_address = dma_map_single(NULL,
+ host->buffer, host->total_length,
+ DMA_TO_DEVICE);
+
pr_debug("Transmitting %d bytes\n", host->total_length);
at91_mci_write(host, ATMEL_PDC_TPR, host->physical_address);
cmd->resp[3] = at91_mci_read(host, AT91_MCI_RSPR(3));
if (host->buffer) {
- dma_free_coherent(NULL, host->total_length, host->buffer, host->physical_address);
+ dma_unmap_single(NULL,
+ host->physical_address, host->total_length,
+ DMA_TO_DEVICE);
+ kfree(host->buffer);
host->buffer = NULL;
}
case MEMGETREGIONINFO:
{
- struct region_info_user ur;
+ uint32_t ur_idx;
+ struct mtd_erase_region_info *kr;
+ struct region_info_user *ur = (struct region_info_user *) argp;
- if (copy_from_user(&ur, argp, sizeof(struct region_info_user)))
+ if (get_user(ur_idx, &(ur->regionindex)))
return -EFAULT;
- if (ur.regionindex >= mtd->numeraseregions)
- return -EINVAL;
- if (copy_to_user(argp, &(mtd->eraseregions[ur.regionindex]),
- sizeof(struct mtd_erase_region_info)))
+ kr = &(mtd->eraseregions[ur_idx]);
+
+ if (put_user(kr->offset, &(ur->offset))
+ || put_user(kr->erasesize, &(ur->erasesize))
+ || put_user(kr->numblocks, &(ur->numblocks)))
return -EFAULT;
+
break;
}
void __iomem *ccr;
void __iomem *fcr;
- unsigned long fcr_phys;
+ unsigned long fcr_base;
unsigned int irq;
tmio_iowrite8(0x81, tmio->ccr + CCR_ICC);
/* (10h)BaseAddress 0x1000 spba.spba2 */
- tmio_iowrite16(tmio->fcr_phys, tmio->ccr + CCR_BASE);
- tmio_iowrite16(tmio->fcr_phys >> 16, tmio->ccr + CCR_BASE + 16);
+ tmio_iowrite16(tmio->fcr_base, tmio->ccr + CCR_BASE);
+ tmio_iowrite16(tmio->fcr_base >> 16, tmio->ccr + CCR_BASE + 2);
/* (04h)Command Register I/O spcmd */
tmio_iowrite8(0x02, tmio->ccr + CCR_COMMAND);
goto err_iomap_ccr;
}
- tmio->fcr_phys = (unsigned long)fcr->start;
+ tmio->fcr_base = fcr->start & 0xfffff;
tmio->fcr = ioremap(fcr->start, fcr->end - fcr->start + 1);
if (!tmio->fcr) {
retval = -EIO;
#define PAGES_PER_SGE_SHIFT 0
#define PAGES_PER_SGE (1 << PAGES_PER_SGE_SHIFT)
+#define BCM_RX_ETH_PAYLOAD_ALIGN 64
+
/* SGE ring related macros */
#define NUM_RX_SGE_PAGES 2
#define RX_SGE_CNT (BCM_PAGE_SIZE / sizeof(struct eth_rx_sge))
u32 rx_csum;
u32 rx_offset;
- u32 rx_buf_use_size; /* useable size */
- u32 rx_buf_size; /* with alignment */
+ u32 rx_buf_size;
#define ETH_OVREHEAD (ETH_HLEN + 8) /* 8 for CRC + VLAN */
#define ETH_MIN_PACKET_SIZE 60
#define ETH_MAX_PACKET_SIZE 1500
#include "bnx2x.h"
#include "bnx2x_init.h"
-#define DRV_MODULE_VERSION "1.45.20"
-#define DRV_MODULE_RELDATE "2008/08/25"
+#define DRV_MODULE_VERSION "1.45.21"
+#define DRV_MODULE_RELDATE "2008/09/03"
#define BNX2X_BC_VER 0x040200
/* Time in jiffies before concluding the transmitter is hung */
if (unlikely(skb == NULL))
return -ENOMEM;
- mapping = pci_map_single(bp->pdev, skb->data, bp->rx_buf_use_size,
+ mapping = pci_map_single(bp->pdev, skb->data, bp->rx_buf_size,
PCI_DMA_FROMDEVICE);
if (unlikely(dma_mapping_error(&bp->pdev->dev, mapping))) {
dev_kfree_skb(skb);
/* move empty skb from pool to prod and map it */
prod_rx_buf->skb = fp->tpa_pool[queue].skb;
mapping = pci_map_single(bp->pdev, fp->tpa_pool[queue].skb->data,
- bp->rx_buf_use_size, PCI_DMA_FROMDEVICE);
+ bp->rx_buf_size, PCI_DMA_FROMDEVICE);
pci_unmap_addr_set(prod_rx_buf, mapping, mapping);
/* move partial skb from cons to pool (don't unmap yet) */
pool entry status to BNX2X_TPA_STOP even if new skb allocation
fails. */
pci_unmap_single(bp->pdev, pci_unmap_addr(rx_buf, mapping),
- bp->rx_buf_use_size, PCI_DMA_FROMDEVICE);
+ bp->rx_buf_size, PCI_DMA_FROMDEVICE);
if (likely(new_skb)) {
/* fix ip xsum and give it to the stack */
} else if (bnx2x_alloc_rx_skb(bp, fp, bd_prod) == 0) {
pci_unmap_single(bp->pdev,
pci_unmap_addr(rx_buf, mapping),
- bp->rx_buf_use_size,
+ bp->rx_buf_size,
PCI_DMA_FROMDEVICE);
skb_reserve(skb, pad);
skb_put(skb, len);
if (fp->tpa_state[i] == BNX2X_TPA_START)
pci_unmap_single(bp->pdev,
pci_unmap_addr(rx_buf, mapping),
- bp->rx_buf_use_size,
+ bp->rx_buf_size,
PCI_DMA_FROMDEVICE);
dev_kfree_skb(skb);
u16 ring_prod, cqe_ring_prod;
int i, j;
- bp->rx_buf_use_size = bp->dev->mtu;
- bp->rx_buf_use_size += bp->rx_offset + ETH_OVREHEAD;
- bp->rx_buf_size = bp->rx_buf_use_size + 64;
+ bp->rx_buf_size = bp->dev->mtu;
+ bp->rx_buf_size += bp->rx_offset + ETH_OVREHEAD +
+ BCM_RX_ETH_PAYLOAD_ALIGN;
if (bp->flags & TPA_ENABLE_FLAG) {
DP(NETIF_MSG_IFUP,
- "rx_buf_use_size %d rx_buf_size %d effective_mtu %d\n",
- bp->rx_buf_use_size, bp->rx_buf_size,
- bp->dev->mtu + ETH_OVREHEAD);
+ "rx_buf_size %d effective_mtu %d\n",
+ bp->rx_buf_size, bp->dev->mtu + ETH_OVREHEAD);
for_each_queue(bp, j) {
struct bnx2x_fastpath *fp = &bp->fp[j];
context->ustorm_st_context.common.status_block_id = sb_id;
context->ustorm_st_context.common.flags =
USTORM_ETH_ST_CONTEXT_CONFIG_ENABLE_MC_ALIGNMENT;
- context->ustorm_st_context.common.mc_alignment_size = 64;
+ context->ustorm_st_context.common.mc_alignment_size =
+ BCM_RX_ETH_PAYLOAD_ALIGN;
context->ustorm_st_context.common.bd_buff_size =
- bp->rx_buf_use_size;
+ bp->rx_buf_size;
context->ustorm_st_context.common.bd_page_base_hi =
U64_HI(fp->rx_desc_mapping);
context->ustorm_st_context.common.bd_page_base_lo =
}
/* Init CQ ring mapping and aggregation size */
- max_agg_size = min((u32)(bp->rx_buf_use_size +
+ max_agg_size = min((u32)(bp->rx_buf_size +
8*BCM_PAGE_SIZE*PAGES_PER_SGE),
(u32)0xffff);
for_each_queue(bp, i) {
pci_unmap_single(bp->pdev,
pci_unmap_addr(rx_buf, mapping),
- bp->rx_buf_use_size,
+ bp->rx_buf_size,
PCI_DMA_FROMDEVICE);
rx_buf->skb = NULL;
if (netif_running(dev))
nv_close(dev);
- pci_enable_wake(pdev, PCI_D3hot, np->wolenabled);
- pci_enable_wake(pdev, PCI_D3cold, np->wolenabled);
pci_disable_device(pdev);
- pci_set_power_state(pdev, PCI_D3hot);
+ if (system_state == SYSTEM_POWER_OFF) {
+ if (pci_enable_wake(pdev, PCI_D3cold, np->wolenabled))
+ pci_enable_wake(pdev, PCI_D3hot, np->wolenabled);
+ pci_set_power_state(pdev, PCI_D3hot);
+ }
}
#else
#define nv_suspend NULL
int err = 0;
int vector, v_budget;
+ /*
+ * Set the default interrupt throttle rate.
+ */
+ adapter->rx_eitr = (1000000 / IXGBE_DEFAULT_ITR_RX_USECS);
+ adapter->tx_eitr = (1000000 / IXGBE_DEFAULT_ITR_TX_USECS);
+
/*
* It's easy to be greedy for MSI-X vectors, but it really
* doesn't do us much good if we have a lot more vectors
int i, pos;
struct pci_dev *pdev;
- pdev = pci_get_device(0x1166, 0x0140, NULL);
- if (pdev) {
- pci_dev_put(pdev);
- adapter->hw_read_wx(adapter,
- NETXEN_PCIE_REG(PCIE_TGT_SPLIT_CHICKEN), &chicken, 4);
- chicken |= 0x4000;
- adapter->hw_write_wx(adapter,
- NETXEN_PCIE_REG(PCIE_TGT_SPLIT_CHICKEN), &chicken, 4);
- }
-
pdev = adapter->pdev;
adapter->hw_read_wx(adapter,
PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega FEther PCC-TXD", 0x5261440f, 0x436768c5),
PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega FEtherII PCC-TXD", 0x5261440f, 0x730df72e),
PCMCIA_DEVICE_PROD_ID12("Dynalink", "L100C16", 0x55632fd5, 0x66bc2a90),
+ PCMCIA_DEVICE_PROD_ID12("IO DATA", "ETXPCM", 0x547e66dc, 0x233adac2),
PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 PC Card (PCMPC100 V3)", 0x0733cc81, 0x232019a8),
PCMCIA_DEVICE_PROD_ID12("MELCO", "LPC3-TX", 0x481e0094, 0xf91af609),
PCMCIA_DEVICE_PROD_ID12("PCMCIA", "100BASE", 0x281f1c5d, 0x7c2add04),
PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega EtherII PCC-TD", 0x5261440f, 0xc49bd73d),
PCMCIA_DEVICE_PROD_ID12("Corega K.K.", "corega EtherII PCC-TD", 0xd4fdcbd8, 0xc49bd73d),
PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega Ether PCC-T", 0x5261440f, 0x6705fcaa),
+ PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega Ether PCC-TD", 0x5261440f, 0x47d5ca83),
PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega FastEther PCC-TX", 0x5261440f, 0x485e85d9),
PCMCIA_DEVICE_PROD_ID12("Corega,K.K.", "Ethernet LAN Card", 0x110d26d9, 0x9fd2f0a2),
PCMCIA_DEVICE_PROD_ID12("corega,K.K.", "Ethernet LAN Card", 0x9791a90e, 0x9fd2f0a2),
PCMCIA_DEVICE_PROD_ID1("CyQ've 10 Base-T LAN CARD", 0x94faf360),
PCMCIA_DEVICE_PROD_ID1("EP-210 PCMCIA LAN CARD.", 0x8850b4de),
PCMCIA_DEVICE_PROD_ID1("ETHER-C16", 0x06a8514f),
- PCMCIA_DEVICE_PROD_ID1("IC-CARD", 0x60cb09a6),
PCMCIA_DEVICE_PROD_ID1("NE2000 Compatible", 0x75b8ad5a),
PCMCIA_DEVICE_PROD_ID2("EN-6200P2", 0xa996d078),
/* too generic! */
case -ENOENT:
break;
default:
- if (netif_msg_drv(pegasus))
+ if (netif_msg_drv(pegasus) && printk_ratelimit())
dev_dbg(&pegasus->intf->dev, "%s, status %d\n",
__FUNCTION__, urb->status);
}
set_current_state(TASK_RUNNING);
if (ret == -ENODEV)
netif_device_detach(pegasus->net);
- if (netif_msg_drv(pegasus))
+ if (netif_msg_drv(pegasus) && printk_ratelimit())
dev_err(&pegasus->intf->dev, "%s, status %d\n",
__FUNCTION__, ret);
goto out;
if ((ret = usb_submit_urb(pegasus->ctrl_urb, GFP_ATOMIC))) {
if (ret == -ENODEV)
netif_device_detach(pegasus->net);
- if (netif_msg_drv(pegasus))
+ if (netif_msg_drv(pegasus) && printk_ratelimit())
dev_err(&pegasus->intf->dev, "%s, status %d\n",
__FUNCTION__, ret);
goto out;
pegasus->eth_regs[EthCtrl2] |= RX_PROMISCUOUS;
if (netif_msg_link(pegasus))
pr_info("%s: Promiscuous mode enabled.\n", net->name);
- } else if (net->mc_count ||
- (net->flags & IFF_ALLMULTI)) {
+ } else if (net->mc_count || (net->flags & IFF_ALLMULTI)) {
pegasus->eth_regs[EthCtrl0] |= RX_MULTICAST;
pegasus->eth_regs[EthCtrl2] &= ~RX_PROMISCUOUS;
if (netif_msg_link(pegasus))
pegasus->eth_regs[EthCtrl2] &= ~RX_PROMISCUOUS;
}
+ pegasus->ctrl_urb->status = 0;
+
pegasus->flags |= ETH_REGS_CHANGE;
ctrl_callback(pegasus->ctrl_urb);
}
}
break;
case ATH9K_CIPHER_WEP:
- if (k->kv_len < 40 / NBBY) {
+ if (k->kv_len < LEN_WEP40) {
DPRINTF(ah->ah_sc, ATH_DBG_KEYCACHE,
"%s: WEP key length %u too small\n",
__func__, k->kv_len);
return false;
}
- if (k->kv_len <= 40 / NBBY)
+ if (k->kv_len <= LEN_WEP40)
keyType = AR_KEYTABLE_TYPE_40;
- else if (k->kv_len <= 104 / NBBY)
+ else if (k->kv_len <= LEN_WEP104)
keyType = AR_KEYTABLE_TYPE_104;
else
keyType = AR_KEYTABLE_TYPE_128;
key2 = get_unaligned_le32(k->kv_val + 6) ^ xorMask;
key3 = (get_unaligned_le16(k->kv_val + 10) ^ xorMask) & 0xffff;
key4 = get_unaligned_le32(k->kv_val + 12) ^ xorMask;
- if (k->kv_len <= 104 / NBBY)
+ if (k->kv_len <= LEN_WEP104)
key4 &= 0xff;
if (keyType == AR_KEYTABLE_TYPE_TKIP && ATH9K_IS_MIC_ENABLED(ah)) {
if (!ret)
return -EIO;
- sc->sc_keytype = hk.kv_type;
+ if (mac)
+ sc->sc_keytype = hk.kv_type;
return 0;
}
key->hw_key_idx = key->keyidx;
/* push IV and Michael MIC generation to stack */
key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
- key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
+ if (key->alg == ALG_TKIP)
+ key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
}
break;
case DISABLE_KEY:
tx_info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK;
tx_status->flags &= ~ATH_TX_BAR;
}
- if (tx_status->flags)
- tx_info->status.excessive_retries = 1;
+
+ if (tx_status->flags & (ATH_TX_ERROR | ATH_TX_XRETRY)) {
+ if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK)) {
+ /* Frame was not ACKed, but an ACK was expected */
+ tx_info->status.excessive_retries = 1;
+ }
+ } else {
+ /* Frame was ACKed */
+ tx_info->flags |= IEEE80211_TX_STAT_ACK;
+ }
tx_info->status.retry_count = tx_status->retries;
struct ath_arx_tid *rxtid, int drop)
{
struct ath_rxbuf *rxbuf;
+ unsigned long flag;
- spin_lock_bh(&rxtid->tidlock);
+ spin_lock_irqsave(&rxtid->tidlock, flag);
while (rxtid->baw_head != rxtid->baw_tail) {
rxbuf = rxtid->rxbuf + rxtid->baw_head;
if (!rxbuf->rx_wbuf) {
INCR(rxtid->baw_head, ATH_TID_MAX_BUFS);
INCR(rxtid->seq_next, IEEE80211_SEQ_MAX);
}
- spin_unlock_bh(&rxtid->tidlock);
+ spin_unlock_irqrestore(&rxtid->tidlock, flag);
}
static struct sk_buff *ath_rxbuf_alloc(struct ath_softc *sc,
txctl->flags = ATH9K_TXDESC_CLRDMASK; /* needed for crypto errors */
if (tx_info->flags & IEEE80211_TX_CTL_NO_ACK)
- tx_info->flags |= ATH9K_TXDESC_NOACK;
+ txctl->flags |= ATH9K_TXDESC_NOACK;
if (tx_info->flags & IEEE80211_TX_CTL_USE_RTS_CTS)
- tx_info->flags |= ATH9K_TXDESC_RTSENA;
+ txctl->flags |= ATH9K_TXDESC_RTSENA;
/*
* Setup for rate calculations.
iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET);
udelay(10);
-
- iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
+ /* clear "init complete" move adapter D0A* --> D0U state */
+ iwl_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
spin_unlock_irqrestore(&priv->lock, flags);
}
udelay(10);
- iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
+ /* clear "init complete" move adapter D0A* --> D0U state */
+ iwl_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
spin_unlock_irqrestore(&priv->lock, flags);
}
FH_TFDIB_CTRL0_REG(FH_SRVC_CHNL),
phy_addr & FH_MEM_TFDIB_DRAM_ADDR_LSB_MSK);
- /* FIME: write the MSB of the phy_addr in CTRL1
- * iwl_write_direct32(priv,
- IWL_FH_TFDIB_CTRL1_REG(IWL_FH_SRVC_CHNL),
- ((phy_addr & MSB_MSK)
- << FH_MEM_TFDIB_REG1_ADDR_BITSHIFT) | byte_count);
- */
iwl_write_direct32(priv,
- FH_TFDIB_CTRL1_REG(FH_SRVC_CHNL), byte_cnt);
+ FH_TFDIB_CTRL1_REG(FH_SRVC_CHNL),
+ (iwl_get_dma_hi_address(phy_addr)
+ << FH_MEM_TFDIB_REG1_ADDR_BITSHIFT) | byte_cnt);
+
iwl_write_direct32(priv,
FH_TCSR_CHNL_TX_BUF_STS_REG(FH_SRVC_CHNL),
1 << FH_TCSR_CHNL_TX_BUF_STS_REG_POS_TB_NUM |
!sta->ht_info.ht_supported)
return -1;
- if (priv->current_ht_config.tx_mimo_ps_mode == IWL_MIMO_PS_STATIC)
+ if (((sta->ht_info.cap & IEEE80211_HT_CAP_MIMO_PS) >> 2)
+ == IWL_MIMO_PS_STATIC)
return -1;
/* Need both Tx chains/antennas to support MIMO */
}
/**
- * iwl4965_full_rxon_required - check if full RXON (vs RXON_ASSOC) cmd is needed
+ * iwl_full_rxon_required - check if full RXON (vs RXON_ASSOC) cmd is needed
* @priv: staging_rxon is compared to active_rxon
*
* If the RXON structure is changing enough to require a new tune,
* or is clearing the RXON_FILTER_ASSOC_MSK, then return 1 to indicate that
* a new tune (full RXON command, rather than RXON_ASSOC cmd) is required.
*/
-static int iwl4965_full_rxon_required(struct iwl_priv *priv)
+static int iwl_full_rxon_required(struct iwl_priv *priv)
{
/* These items are only settable from the full RXON command */
priv->active_rxon.ofdm_ht_single_stream_basic_rates) ||
(priv->staging_rxon.ofdm_ht_dual_stream_basic_rates !=
priv->active_rxon.ofdm_ht_dual_stream_basic_rates) ||
- (priv->staging_rxon.rx_chain != priv->active_rxon.rx_chain) ||
(priv->staging_rxon.assoc_id != priv->active_rxon.assoc_id))
return 1;
/* If we don't need to send a full RXON, we can use
* iwl4965_rxon_assoc_cmd which is used to reconfigure filter
* and other flags for the current radio configuration. */
- if (!iwl4965_full_rxon_required(priv)) {
+ if (!iwl_full_rxon_required(priv)) {
ret = iwl_send_rxon_assoc(priv);
if (ret) {
IWL_ERROR("Error setting RXON_ASSOC (%d)\n", ret);
iwl_conf->supported_chan_width = 0;
}
- iwl_conf->tx_mimo_ps_mode =
- (u8)((ht_conf->cap & IEEE80211_HT_CAP_MIMO_PS) >> 2);
memcpy(iwl_conf->supp_mcs_set, ht_conf->supp_mcs_set, 16);
iwl_conf->control_channel = ht_bss_conf->primary_channel;
udelay(5);
/* FIXME: apm_ops.suspend(priv) */
- priv->cfg->ops->lib->apm_ops.reset(priv);
+ if (exit_pending || test_bit(STATUS_IN_SUSPEND, &priv->status))
+ priv->cfg->ops->lib->apm_ops.stop(priv);
+ else
+ priv->cfg->ops->lib->apm_ops.reset(priv);
priv->cfg->ops->lib->free_shared_mem(priv);
exit:
{
struct iwl_priv *priv = hw->priv;
int ret;
+ u16 pci_cmd;
IWL_DEBUG_MAC80211("enter\n");
pci_restore_state(priv->pci_dev);
pci_enable_msi(priv->pci_dev);
+ /* enable interrupts if needed: hw bug w/a */
+ pci_read_config_word(priv->pci_dev, PCI_COMMAND, &pci_cmd);
+ if (pci_cmd & PCI_COMMAND_INTX_DISABLE) {
+ pci_cmd &= ~PCI_COMMAND_INTX_DISABLE;
+ pci_write_config_word(priv->pci_dev, PCI_COMMAND, pci_cmd);
+ }
+
ret = request_irq(priv->pci_dev->irq, iwl4965_isr, IRQF_SHARED,
DRV_NAME, priv);
if (ret) {
priv->assoc_id = 0;
timestamp = ((struct ieee80211_mgmt *)skb->data)->u.beacon.timestamp;
- priv->timestamp = le64_to_cpu(timestamp) + (priv->beacon_int * 1000);
+ priv->timestamp = le64_to_cpu(timestamp);
IWL_DEBUG_MAC80211("leave\n");
spin_unlock_irqrestore(&priv->lock, flags);
iwl_dbgfs_unregister(priv);
sysfs_remove_group(&pdev->dev.kobj, &iwl4965_attribute_group);
+ /* ieee80211_unregister_hw call wil cause iwl4965_mac_stop to
+ * to be called and iwl4965_down since we are removing the device
+ * we need to set STATUS_EXIT_PENDING bit.
+ */
+ set_bit(STATUS_EXIT_PENDING, &priv->status);
if (priv->mac80211_registered) {
ieee80211_unregister_hw(priv->hw);
priv->mac80211_registered = 0;
+ } else {
+ iwl4965_down(priv);
}
- set_bit(STATUS_EXIT_PENDING, &priv->status);
-
- iwl4965_down(priv);
-
/* make sure we flush any pending irq or
* tasklet for the driver
*/
clear_bit(STATUS_GEO_CONFIGURED, &priv->status);
}
-static u8 is_single_rx_stream(struct iwl_priv *priv)
+static bool is_single_rx_stream(struct iwl_priv *priv)
{
return !priv->current_ht_config.is_ht ||
((priv->current_ht_config.supp_mcs_set[1] == 0) &&
- (priv->current_ht_config.supp_mcs_set[2] == 0)) ||
- priv->ps_mode == IWL_MIMO_PS_STATIC;
+ (priv->current_ht_config.supp_mcs_set[2] == 0));
}
static u8 iwl_is_channel_extension(struct iwl_priv *priv,
* MIMO (dual stream) requires at least 2, but works better with 3.
* This does not determine *which* chains to use, just how many.
*/
-static int iwlcore_get_rx_chain_counter(struct iwl_priv *priv,
- u8 *idle_state, u8 *rx_state)
+static int iwl_get_active_rx_chain_count(struct iwl_priv *priv)
{
- u8 is_single = is_single_rx_stream(priv);
- u8 is_cam = test_bit(STATUS_POWER_PMI, &priv->status) ? 0 : 1;
+ bool is_single = is_single_rx_stream(priv);
+ bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status);
/* # of Rx chains to use when expecting MIMO. */
if (is_single || (!is_cam && (priv->ps_mode == IWL_MIMO_PS_STATIC)))
- *rx_state = 2;
+ return 2;
else
- *rx_state = 3;
+ return 3;
+}
+static int iwl_get_idle_rx_chain_count(struct iwl_priv *priv, int active_cnt)
+{
+ int idle_cnt;
+ bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status);
/* # Rx chains when idling and maybe trying to save power */
switch (priv->ps_mode) {
case IWL_MIMO_PS_STATIC:
case IWL_MIMO_PS_DYNAMIC:
- *idle_state = (is_cam) ? 2 : 1;
+ idle_cnt = (is_cam) ? 2 : 1;
break;
case IWL_MIMO_PS_NONE:
- *idle_state = (is_cam) ? *rx_state : 1;
+ idle_cnt = (is_cam) ? active_cnt : 1;
break;
+ case IWL_MIMO_PS_INVALID:
default:
- *idle_state = 1;
+ IWL_ERROR("invalide mimo ps mode %d\n", priv->ps_mode);
+ WARN_ON(1);
+ idle_cnt = -1;
break;
}
-
- return 0;
+ return idle_cnt;
}
/**
*/
void iwl_set_rxon_chain(struct iwl_priv *priv)
{
- u8 is_single = is_single_rx_stream(priv);
- u8 idle_state, rx_state;
-
- priv->staging_rxon.rx_chain = 0;
- rx_state = idle_state = 3;
+ bool is_single = is_single_rx_stream(priv);
+ bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status);
+ u8 idle_rx_cnt, active_rx_cnt;
+ u16 rx_chain;
/* Tell uCode which antennas are actually connected.
* Before first association, we assume all antennas are connected.
* Just after first association, iwl_chain_noise_calibration()
* checks which antennas actually *are* connected. */
- priv->staging_rxon.rx_chain |=
- cpu_to_le16(priv->hw_params.valid_rx_ant <<
- RXON_RX_CHAIN_VALID_POS);
+ rx_chain = priv->hw_params.valid_rx_ant << RXON_RX_CHAIN_VALID_POS;
/* How many receivers should we use? */
- iwlcore_get_rx_chain_counter(priv, &idle_state, &rx_state);
- priv->staging_rxon.rx_chain |=
- cpu_to_le16(rx_state << RXON_RX_CHAIN_MIMO_CNT_POS);
- priv->staging_rxon.rx_chain |=
- cpu_to_le16(idle_state << RXON_RX_CHAIN_CNT_POS);
-
- if (!is_single && (rx_state >= 2) &&
- !test_bit(STATUS_POWER_PMI, &priv->status))
+ active_rx_cnt = iwl_get_active_rx_chain_count(priv);
+ idle_rx_cnt = iwl_get_idle_rx_chain_count(priv, active_rx_cnt);
+
+ /* correct rx chain count accoridng hw settings */
+ if (priv->hw_params.rx_chains_num < active_rx_cnt)
+ active_rx_cnt = priv->hw_params.rx_chains_num;
+
+ if (priv->hw_params.rx_chains_num < idle_rx_cnt)
+ idle_rx_cnt = priv->hw_params.rx_chains_num;
+
+ rx_chain |= active_rx_cnt << RXON_RX_CHAIN_MIMO_CNT_POS;
+ rx_chain |= idle_rx_cnt << RXON_RX_CHAIN_CNT_POS;
+
+ priv->staging_rxon.rx_chain = cpu_to_le16(rx_chain);
+
+ if (!is_single && (active_rx_cnt >= 2) && is_cam)
priv->staging_rxon.rx_chain |= RXON_RX_CHAIN_MIMO_FORCE_MSK;
else
priv->staging_rxon.rx_chain &= ~RXON_RX_CHAIN_MIMO_FORCE_MSK;
- IWL_DEBUG_ASSOC("rx chain %X\n", priv->staging_rxon.rx_chain);
+ IWL_DEBUG_ASSOC("rx_chain=0x%Xi active=%d idle=%d\n",
+ priv->staging_rxon.rx_chain,
+ active_rx_cnt, idle_rx_cnt);
+
+ WARN_ON(active_rx_cnt == 0 || idle_rx_cnt == 0 ||
+ active_rx_cnt < idle_rx_cnt);
}
EXPORT_SYMBOL(iwl_set_rxon_chain);
/* self configuration data */
u8 is_ht;
u8 supported_chan_width;
- u16 tx_mimo_ps_mode;
u8 is_green_field;
u8 sgf; /* HT_SHORT_GI_* short guard interval */
u8 max_amsdu_size;
#define FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE (0x01000000)
+#define FH_MEM_TFDIB_REG1_ADDR_BITSHIFT 28
/**
* Transmit DMA Channel Control/Status Registers (TCSR)
rx_status.antenna = 0;
rx_status.flag = 0;
- rx_status.flag |= RX_FLAG_TSFT;
+
+ /* TSF isn't reliable. In order to allow smooth user experience,
+ * this W/A doesn't propagate it to the mac80211 */
+ /*rx_status.flag |= RX_FLAG_TSFT;*/
if ((unlikely(rx_start->cfg_phy_cnt > 20))) {
IWL_DEBUG_DROP("dsp size out of range [0,20]: %d/n",
else
scan_ch->type = SCAN_CHANNEL_TYPE_ACTIVE;
- if ((scan_ch->type & SCAN_CHANNEL_TYPE_ACTIVE) && n_probes)
+ if (n_probes)
scan_ch->type |= IWL_SCAN_PROBE_MASK(n_probes);
scan_ch->active_dwell = cpu_to_le16(active_dwell);
/**
* iwl_tx_queue_init - Allocate and initialize one tx/cmd queue
*/
-static int iwl_tx_queue_init(struct iwl_priv *priv,
- struct iwl_tx_queue *txq,
+static int iwl_tx_queue_init(struct iwl_priv *priv, struct iwl_tx_queue *txq,
int slots_num, u32 txq_id)
{
int i, len;
- int rc = 0;
+ int ret;
/*
* Alloc buffer array for commands (Tx or other types of commands).
continue;
}
- txq->cmd[i] = kmalloc(len, GFP_KERNEL | GFP_DMA);
+ txq->cmd[i] = kmalloc(len, GFP_KERNEL);
if (!txq->cmd[i])
- return -ENOMEM;
+ goto err;
}
/* Alloc driver data array and TFD circular buffer */
- rc = iwl_tx_queue_alloc(priv, txq, txq_id);
- if (rc) {
- for (i = 0; i < slots_num; i++)
- kfree(txq->cmd[i]);
+ ret = iwl_tx_queue_alloc(priv, txq, txq_id);
+ if (ret)
+ goto err;
- return -ENOMEM;
- }
txq->need_update = 0;
/* TFD_QUEUE_SIZE_MAX must be power-of-two size, otherwise
iwl_hw_tx_queue_init(priv, txq);
return 0;
+err:
+ for (i = 0; i < slots_num; i++) {
+ kfree(txq->cmd[i]);
+ txq->cmd[i] = NULL;
+ }
+
+ if (txq_id == IWL_CMD_QUEUE_NUM) {
+ kfree(txq->cmd[slots_num]);
+ txq->cmd[slots_num] = NULL;
+ }
+ return -ENOMEM;
}
/**
* iwl_hw_txq_ctx_free - Free TXQ Context
if (ret < 0) {
lbs_pr_err("can't download helper at 0x%x, ret %d\n",
sent, ret);
- goto done;
+ goto err_release;
}
if (count == 0)
sent += count;
}
+err_release:
release_firmware(fw);
- ret = 0;
-
done:
lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret);
return ret;
}
ret = if_cs_poll_while_fw_download(card, IF_CS_SCRATCH, 0x5a);
- if (ret < 0) {
+ if (ret < 0)
lbs_pr_err("firmware download failed\n");
- goto err_release;
- }
-
- ret = 0;
- goto done;
-
err_release:
release_firmware(fw);
priv->promiscuous = promisc;
}
+ /* If we're not in promiscuous mode, then we need to set the
+ * group address if either we want to multicast, or if we were
+ * multicasting and want to stop */
if (! promisc && (mc_count || priv->mc_count) ) {
struct dev_mc_list *p = dev->mc_list;
struct hermes_multicast mclist;
printk(KERN_WARNING "%s: Multicast list is "
"longer than mc_count\n", dev->name);
- err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFGROUPADDRESSES,
- HERMES_BYTES_TO_RECLEN(priv->mc_count * ETH_ALEN),
- &mclist);
+ err = hermes_write_ltv(hw, USER_BAP,
+ HERMES_RID_CNFGROUPADDRESSES,
+ HERMES_BYTES_TO_RECLEN(mc_count * ETH_ALEN),
+ &mclist);
if (err)
printk(KERN_ERR "%s: Error %d setting multicast list.\n",
dev->name, err);
*/
#define is_power_of_two(x) ( !((x) & ((x)-1)) )
#define low_bit_mask(x) ( ((x)-1) & ~(x) )
-#define is_valid_mask(x) is_power_of_two(1 + (x) + low_bit_mask(x))
+#define is_valid_mask(x) is_power_of_two(1LU + (x) + low_bit_mask(x))
/*
* Macro's to find first set bit in a variable.
* does not exceed the given typelimit.
*/
#define FIELD_CHECK(__mask, __type) \
- BUILD_BUG_ON(!__builtin_constant_p(__mask) || \
- !(__mask) || \
+ BUILD_BUG_ON(!(__mask) || \
!is_valid_mask(__mask) || \
(__mask) != (__type)(__mask)) \
continue;
r_size = r->end - r->start + 1;
/* For bridges size != alignment */
- align = (i < PCI_BRIDGE_RESOURCES) ? r_size : r->start;
+ align = resource_alignment(r);
order = __ffs(align) - 20;
if (order > 11) {
- dev_warn(&dev->dev, "BAR %d too large: "
+ dev_warn(&dev->dev, "BAR %d bad alignment %llx: "
"%#016llx-%#016llx\n", i,
+ (unsigned long long)align,
(unsigned long long)r->start,
(unsigned long long)r->end);
r->flags = 0;
case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
extended_irq = &res->data.extended_irq;
- if (extended_irq->producer_consumer == ACPI_PRODUCER)
- return AE_OK;
if (extended_irq->interrupt_count == 0)
pnp_add_irq_resource(dev, 0, IORESOURCE_DISABLED);
static int cmos_suspend(struct device *dev, pm_message_t mesg)
{
struct cmos_rtc *cmos = dev_get_drvdata(dev);
- int do_wake = device_may_wakeup(dev);
unsigned char tmp;
/* only the alarm might be a wakeup event source */
if (tmp & (RTC_PIE|RTC_AIE|RTC_UIE)) {
unsigned char mask;
- if (do_wake)
+ if (device_may_wakeup(dev))
mask = RTC_IRQMASK & ~RTC_AIE;
else
mask = RTC_IRQMASK;
return 0;
}
+/* We want RTC alarms to wake us from e.g. ACPI G2/S5 "soft off", even
+ * after a detour through G3 "mechanical off", although the ACPI spec
+ * says wakeup should only work from G1/S4 "hibernate". To most users,
+ * distinctions between S4 and S5 are pointless. So when the hardware
+ * allows, don't draw that distinction.
+ */
+static inline int cmos_poweroff(struct device *dev)
+{
+ return cmos_suspend(dev, PMSG_HIBERNATE);
+}
+
static int cmos_resume(struct device *dev)
{
struct cmos_rtc *cmos = dev_get_drvdata(dev);
#else
#define cmos_suspend NULL
#define cmos_resume NULL
+
+static inline int cmos_poweroff(struct device *dev)
+{
+ return -ENOSYS;
+}
+
#endif
/*----------------------------------------------------------------*/
static int __devinit
cmos_pnp_probe(struct pnp_dev *pnp, const struct pnp_device_id *id)
{
- /* REVISIT paranoia argues for a shutdown notifier, since PNP
- * drivers can't provide shutdown() methods to disable IRQs.
- * Or better yet, fix PNP to allow those methods...
- */
if (pnp_port_start(pnp,0) == 0x70 && !pnp_irq_valid(pnp,0))
/* Some machines contain a PNP entry for the RTC, but
* don't define the IRQ. It should always be safe to
#define cmos_pnp_resume NULL
#endif
+static void cmos_pnp_shutdown(struct device *pdev)
+{
+ if (system_state == SYSTEM_POWER_OFF && !cmos_poweroff(pdev))
+ return;
+
+ cmos_do_shutdown();
+}
static const struct pnp_device_id rtc_ids[] = {
{ .id = "PNP0b00", },
.flags = PNP_DRIVER_RES_DO_NOT_CHANGE,
.suspend = cmos_pnp_suspend,
.resume = cmos_pnp_resume,
+ .driver = {
+ .name = (char *)driver_name,
+ .shutdown = cmos_pnp_shutdown,
+ }
};
#endif /* CONFIG_PNP */
static void cmos_platform_shutdown(struct platform_device *pdev)
{
+ if (system_state == SYSTEM_POWER_OFF && !cmos_poweroff(&pdev->dev))
+ return;
+
cmos_do_shutdown();
}
*/
void rtc_time_to_tm(unsigned long time, struct rtc_time *tm)
{
- unsigned int days, month, year;
+ unsigned int month, year;
+ int days;
days = time / 86400;
- time -= days * 86400;
+ time -= (unsigned int) days * 86400;
/* day of the week, 1970-01-01 was a Thursday */
tm->tm_wday = (days + 4) % 7;
ret = sysfs_create_group(&chp->dev.kobj, &chp_attr_group);
if (ret) {
device_unregister(&chp->dev);
- goto out_free;
+ goto out;
}
mutex_lock(&channel_subsystems[chpid.cssid]->mutex);
if (channel_subsystems[chpid.cssid]->cm_enabled) {
sysfs_remove_group(&chp->dev.kobj, &chp_attr_group);
device_unregister(&chp->dev);
mutex_unlock(&channel_subsystems[chpid.cssid]->mutex);
- goto out_free;
+ goto out;
}
}
channel_subsystems[chpid.cssid]->chps[chpid.id] = chp;
mutex_unlock(&channel_subsystems[chpid.cssid]->mutex);
- return ret;
+ goto out;
out_free:
kfree(chp);
+out:
return ret;
}
case 1: /* status pending */
case 2: /* busy */
return -EBUSY;
- default: /* device/path not operational */
+ case 3: /* device/path not operational */
return cio_start_handle_notoper(sch, lpm);
+ default:
+ return ccode;
}
}
css = to_css(dev);
mutex_destroy(&css->mutex);
+ if (css->pseudo_subchannel) {
+ /* Implies that it has been generated but never registered. */
+ css_subchannel_release(&css->pseudo_subchannel->dev);
+ css->pseudo_subchannel = NULL;
+ }
kfree(css);
}
}
channel_subsystems[i] = css;
ret = setup_css(i);
- if (ret)
- goto out_free;
+ if (ret) {
+ kfree(channel_subsystems[i]);
+ goto out_unregister;
+ }
ret = device_register(&css->device);
- if (ret)
- goto out_free_all;
+ if (ret) {
+ put_device(&css->device);
+ goto out_unregister;
+ }
if (css_chsc_characteristics.secm) {
ret = device_create_file(&css->device,
&dev_attr_cm_enable);
}
ret = register_reboot_notifier(&css_reboot_notifier);
if (ret)
- goto out_pseudo;
+ goto out_unregister;
css_init_done = 1;
/* Enable default isc for I/O subchannels. */
for_each_subchannel(__init_channel_subsystem, NULL);
return 0;
-out_pseudo:
- device_unregister(&channel_subsystems[i]->pseudo_subchannel->dev);
out_file:
- device_remove_file(&channel_subsystems[i]->device,
- &dev_attr_cm_enable);
+ if (css_chsc_characteristics.secm)
+ device_remove_file(&channel_subsystems[i]->device,
+ &dev_attr_cm_enable);
out_device:
device_unregister(&channel_subsystems[i]->device);
-out_free_all:
- kfree(channel_subsystems[i]->pseudo_subchannel->lock);
- kfree(channel_subsystems[i]->pseudo_subchannel);
-out_free:
- kfree(channel_subsystems[i]);
out_unregister:
while (i > 0) {
struct channel_subsystem *css;
i--;
css = channel_subsystems[i];
device_unregister(&css->pseudo_subchannel->dev);
+ css->pseudo_subchannel = NULL;
if (css_chsc_characteristics.secm)
device_remove_file(&css->device,
&dev_attr_cm_enable);
{
struct subchannel *sch;
+ /* Allow ccw_device_offline while disconnected. */
+ if (cdev->private->state == DEV_STATE_DISCONNECTED ||
+ cdev->private->state == DEV_STATE_NOT_OPER) {
+ cdev->private->flags.donotify = 0;
+ ccw_device_done(cdev, DEV_STATE_NOT_OPER);
+ return 0;
+ }
if (ccw_device_is_orphan(cdev)) {
ccw_device_done(cdev, DEV_STATE_OFFLINE);
return 0;
dev_set_drvdata(dev, sdkp);
add_disk(gd);
+ blk_register_filter(gd);
sd_dif_config_host(sdkp);
sd_printk(KERN_NOTICE, sdkp, "Attached SCSI %sdisk\n",
struct scsi_disk *sdkp = dev_get_drvdata(dev);
device_del(&sdkp->dev);
+ blk_unregister_filter(sdkp->disk);
del_gendisk(sdkp->disk);
sd_shutdown(dev);
dev_set_drvdata(dev, cd);
disk->flags |= GENHD_FL_REMOVABLE;
add_disk(disk);
+ blk_register_filter(disk);
sdev_printk(KERN_DEBUG, sdev,
"Attached scsi CD-ROM %s\n", cd->cdi.name);
{
struct scsi_cd *cd = dev_get_drvdata(dev);
+ blk_unregister_filter(cd->disk);
del_gendisk(cd->disk);
mutex_lock(&sr_ref_mutex);
* kick the UART on a regular basis.
*/
if (!(iir1 & UART_IIR_NO_INT) && (iir & UART_IIR_NO_INT)) {
+ up->bugs |= UART_BUG_THRE;
pr_debug("ttyS%d - using backup timer\n", port->line);
- up->timer.function = serial8250_backup_timeout;
- up->timer.data = (unsigned long)up;
- mod_timer(&up->timer, jiffies +
- poll_timeout(up->port.timeout) + HZ / 5);
}
}
+ /*
+ * The above check will only give an accurate result the first time
+ * the port is opened so this value needs to be preserved.
+ */
+ if (up->bugs & UART_BUG_THRE) {
+ up->timer.function = serial8250_backup_timeout;
+ up->timer.data = (unsigned long)up;
+ mod_timer(&up->timer, jiffies +
+ poll_timeout(up->port.timeout) + HZ / 5);
+ }
+
/*
* If the "interrupt" for this port doesn't correspond with any
* hardware interrupt, we use a timer-based system. The original
#define UART_BUG_QUOT (1 << 0) /* UART has buggy quot LSB */
#define UART_BUG_TXEN (1 << 1) /* UART has buggy TX IIR status */
#define UART_BUG_NOMSR (1 << 2) /* UART has buggy MSR status bits (Au1x00) */
+#define UART_BUG_THRE (1 << 3) /* UART has buggy THRE reassertion */
#define PROBE_RSA (1 << 0)
#define PROBE_ANY (~0)
if (cpu_is_omap16xx())
ocpi_enable();
-#ifdef CONFIG_ARCH_OMAP_OTG
+#ifdef CONFIG_USB_OTG
if (need_transceiver) {
ohci->transceiver = otg_get_transceiver();
if (ohci->transceiver) {
if (serial->type->set_termios) {
termios->c_cflag = cflag;
tty_termios_encode_baud_rate(termios, baud, baud);
- serial->type->set_termios(NULL, port, &dummy);
+ serial->type->set_termios(tty, port, &dummy);
port->port.tty = NULL;
kfree(termios);
ret = register_framebuffer(info);
if (ret < 0) {
dev_err(dev, "failed to register framebuffer device: %d\n", ret);
- goto free_cmap;
+ goto reset_drvdata;
}
/* add selected videomode to modelist */
return 0;
-
+reset_drvdata:
+ dev_set_drvdata(dev, NULL);
free_cmap:
fb_dealloc_cmap(&info->cmap);
unregister_irqs:
{
struct device *dev = &pdev->dev;
struct fb_info *info = dev_get_drvdata(dev);
- struct atmel_lcdfb_info *sinfo = info->par;
+ struct atmel_lcdfb_info *sinfo;
- if (!sinfo)
+ if (!info || !info->par)
return 0;
+ sinfo = info->par;
cancel_work_sync(&sinfo->task);
exit_backlight(sinfo);
static int cirrusfb_check_var(struct fb_var_screeninfo *var,
struct fb_info *info)
{
- int nom, den; /* translyting from pixels->bytes */
- int yres, i;
- static struct { int xres, yres; } modes[] =
- { { 1600, 1280 },
- { 1280, 1024 },
- { 1024, 768 },
- { 800, 600 },
- { 640, 480 },
- { -1, -1 } };
+ int yres;
+ /* memory size in pixels */
+ unsigned pixels = info->screen_size * 8 / var->bits_per_pixel;
switch (var->bits_per_pixel) {
case 1:
- nom = 4;
- den = 8;
+ pixels /= 4;
break; /* 8 pixel per byte, only 1/4th of mem usable */
case 8:
case 16:
case 24:
case 32:
- nom = var->bits_per_pixel / 8;
- den = 1;
break; /* 1 pixel == 1 byte */
default:
printk(KERN_ERR "cirrusfb: mode %dx%dx%d rejected..."
return -EINVAL;
}
- if (var->xres * nom / den * var->yres > info->screen_size) {
- printk(KERN_ERR "cirrusfb: mode %dx%dx%d rejected..."
- "resolution too high to fit into video memory!\n",
- var->xres, var->yres, var->bits_per_pixel);
- DPRINTK("EXIT - EINVAL error\n");
- return -EINVAL;
- }
-
+ if (var->xres_virtual < var->xres)
+ var->xres_virtual = var->xres;
/* use highest possible virtual resolution */
- if (var->xres_virtual == -1 &&
- var->yres_virtual == -1) {
- printk(KERN_INFO
- "cirrusfb: using maximum available virtual resolution\n");
- for (i = 0; modes[i].xres != -1; i++) {
- int size = modes[i].xres * nom / den * modes[i].yres;
- if (size < info->screen_size / 2)
- break;
- }
- if (modes[i].xres == -1) {
- printk(KERN_ERR "cirrusfb: could not find a virtual "
- "resolution that fits into video memory!!\n");
- DPRINTK("EXIT - EINVAL error\n");
- return -EINVAL;
- }
- var->xres_virtual = modes[i].xres;
- var->yres_virtual = modes[i].yres;
+ if (var->yres_virtual == -1) {
+ var->yres_virtual = pixels / var->xres_virtual;
printk(KERN_INFO "cirrusfb: virtual resolution set to "
"maximum of %dx%d\n", var->xres_virtual,
var->yres_virtual);
}
-
- if (var->xres_virtual < var->xres)
- var->xres_virtual = var->xres;
if (var->yres_virtual < var->yres)
var->yres_virtual = var->yres;
+ if (var->xres_virtual * var->yres_virtual > pixels) {
+ printk(KERN_ERR "cirrusfb: mode %dx%dx%d rejected... "
+ "virtual resolution too high to fit into video memory!\n",
+ var->xres_virtual, var->yres_virtual,
+ var->bits_per_pixel);
+ DPRINTK("EXIT - EINVAL error\n");
+ return -EINVAL;
+ }
+
+
if (var->xoffset < 0)
var->xoffset = 0;
if (var->yoffset < 0)
#define VOODOO5_MAX_PIXCLOCK 350000
static struct fb_fix_screeninfo tdfx_fix __devinitdata = {
- .id = "3Dfx",
.type = FB_TYPE_PACKED_PIXELS,
.visual = FB_VISUAL_PSEUDOCOLOR,
.ypanstep = 1,
if (dev_id < PCI_DEVICE_ID_3DFX_VOODOO5) {
/* Banshee/Voodoo3 */
chip_size = 2;
- if (has_sgram && (draminit0 & DRAMINIT0_SGRAM_TYPE))
+ if (has_sgram && !(draminit0 & DRAMINIT0_SGRAM_TYPE))
chip_size = 1;
} else {
/* Voodoo4/5 */
/* Configure the default fb_fix_screeninfo first */
switch (pdev->device) {
case PCI_DEVICE_ID_3DFX_BANSHEE:
- strcat(tdfx_fix.id, " Banshee");
+ strcpy(tdfx_fix.id, "3Dfx Banshee");
default_par->max_pixclock = BANSHEE_MAX_PIXCLOCK;
break;
case PCI_DEVICE_ID_3DFX_VOODOO3:
- strcat(tdfx_fix.id, " Voodoo3");
+ strcpy(tdfx_fix.id, "3Dfx Voodoo3");
default_par->max_pixclock = VOODOO3_MAX_PIXCLOCK;
break;
case PCI_DEVICE_ID_3DFX_VOODOO5:
- strcat(tdfx_fix.id, " Voodoo5");
+ strcpy(tdfx_fix.id, "3Dfx Voodoo5");
default_par->max_pixclock = VOODOO5_MAX_PIXCLOCK;
break;
}
#define PAGES2KB(_p) ((_p)<<(PAGE_SHIFT-10))
-#define BALLOON_CLASS_NAME "memory"
+#define BALLOON_CLASS_NAME "xen_memory"
struct balloon_stats {
/* We aim for 'current allocation' == 'target allocation'. */
$(obj)/%: $(obj)/%.ihex | $(objtree)/$(obj)/$$(dir %)
$(call cmd,ihex)
+# Don't depend on ihex2fw if we're installing and it already exists.
+# Putting it after | in the dependencies doesn't seem sufficient when
+# we're installing after a cross-compile, because ihex2fw has dependencies
+# on stuff like /usr/lib/gcc/ppc64-redhat-linux/4.3.0/include/stddef.h and
+# thus wants to be rebuilt. Which it can't be, if the prebuilt kernel tree
+# is exported read-only for someone to run 'make install'.
+ifeq ($(INSTALL):$(wildcard $(obj)/ihex2fw),install:$(obj)/ihex2fw)
+ihex2fw_dep :=
+else
+ihex2fw_dep := $(obj)/ihex2fw
+endif
+
# .HEX is also Intel HEX, but where the offset and length in each record
# is actually meaningful, because the firmware has to be loaded in a certain
# order rather than as a single binary blob. Thus, we convert them into our
# more compact binary representation of ihex records (<linux/ihex.h>)
-$(obj)/%.fw: $(obj)/%.HEX $(obj)/ihex2fw | $(objtree)/$(obj)/$$(dir %)
+$(obj)/%.fw: $(obj)/%.HEX $(ihex2fw_dep) | $(objtree)/$(obj)/$$(dir %)
$(call cmd,ihex2fw)
# .H16 is our own modified form of Intel HEX, with 16-bit length for records.
-$(obj)/%.fw: $(obj)/%.H16 $(obj)/ihex2fw | $(objtree)/$(obj)/$$(dir %)
+$(obj)/%.fw: $(obj)/%.H16 $(ihex2fw_dep) | $(objtree)/$(obj)/$$(dir %)
$(call cmd,h16tofw)
$(firmware-dirs):
on parent directory when server supports Unix Extensions but not POSIX
create. Update cifs.upcall version to handle new Kerberos sec flags
(this requires update of cifs.upcall program from Samba). Fix memory leak
-on dns_upcall (resolving DFS referralls).
+on dns_upcall (resolving DFS referralls). Fix plain text password
+authentication (requires setting SecurityFlags to 0x30030 to enable
+lanman and plain text though). Fix writes to be at correct offset when
+file is open with O_APPEND and file is on a directio (forcediretio) mount.
Version 1.53
------------
hashing mechanisms (as "must use") on the other hand
does not make much sense. Default flags are
0x07007
- (NTLM, NTLMv2 and packet signing allowed). Maximum
+ (NTLM, NTLMv2 and packet signing allowed). The maximum
allowable flags if you want to allow mounts to servers
using weaker password hashes is 0x37037 (lanman,
- plaintext, ntlm, ntlmv2, signing allowed):
+ plaintext, ntlm, ntlmv2, signing allowed). Some
+ SecurityFlags require the corresponding menuconfig
+ options to be enabled (lanman and plaintext require
+ CONFIG_CIFS_WEAK_PW_HASH for example). Enabling
+ plaintext authentication currently requires also
+ enabling lanman authentication in the security flags
+ because the cifs module only supports sending
+ laintext passwords using the older lanman dialect
+ form of the session setup SMB. (e.g. for authentication
+ using plain text passwords, set the SecurityFlags
+ to 0x30030):
may use packet signing 0x00001
must use packet signing 0x01001
if ((ses->server->secMode & SECMODE_PW_ENCRYPT) == 0)
if (extended_security & CIFSSEC_MAY_PLNTXT) {
+ memset(lnm_session_key, 0, CIFS_SESS_KEY_SIZE);
memcpy(lnm_session_key, password_with_pad,
CIFS_ENCPWD_SIZE);
return;
return -EBADF;
open_file = (struct cifsFileInfo *) file->private_data;
+ rc = generic_write_checks(file, poffset, &write_size, 0);
+ if (rc)
+ return rc;
+
xid = GetXid();
if (*poffset > file->f_path.dentry->d_inode->i_size)
#ifdef CONFIG_CIFS_WEAK_PW_HASH
char lnm_session_key[CIFS_SESS_KEY_SIZE];
+ pSMB->req.hdr.Flags2 &= ~SMBFLG2_UNICODE;
+
/* no capabilities flags in old lanman negotiation */
pSMB->old_req.PasswordLength = cpu_to_le16(CIFS_SESS_KEY_SIZE);
}
}
+ if (errors > 0) {
+ dfprintk(MOUNT, "NFS: parsing encountered %d error%s\n",
+ errors, (errors == 1 ? "" : "s"));
+ if (!sloppy)
+ return 0;
+ }
return 1;
out_nomem:
* enough space for either:
*/
alloc = sizeof(struct posix_ace_state_array)
- + cnt*sizeof(struct posix_ace_state);
+ + cnt*sizeof(struct posix_user_ace_state);
state->users = kzalloc(alloc, GFP_KERNEL);
if (!state->users)
return -ENOMEM;
int slack_bytes;
__be32 status;
- status = nfserr_resource;
- cstate = cstate_alloc();
- if (cstate == NULL)
- goto out;
-
resp->xbuf = &rqstp->rq_res;
resp->p = rqstp->rq_res.head[0].iov_base + rqstp->rq_res.head[0].iov_len;
resp->tagp = resp->p;
if (args->minorversion > NFSD_SUPPORTED_MINOR_VERSION)
goto out;
+ status = nfserr_resource;
+ cstate = cstate_alloc();
+ if (cstate == NULL)
+ goto out;
+
status = nfs_ok;
while (!status && resp->opcnt < args->opcnt) {
op = &args->ops[resp->opcnt++];
nfsd4_increment_op_stats(op->opnum);
}
+ cstate_free(cstate);
out:
nfsd4_release_compoundargs(args);
- cstate_free(cstate);
dprintk("nfsv4 compound returned %d\n", ntohl(status));
return status;
}
* Reason flags (32-bit). Cumulative flags describing the change(s) to the
* file since it was last opened. I think the names speak for themselves but
* if you disagree check out the descriptions in the Linux NTFS project NTFS
- * documentation: http://linux-ntfs.sourceforge.net/ntfs/files/usnjrnl.html
+ * documentation: http://www.linux-ntfs.org/
*/
enum {
USN_REASON_DATA_OVERWRITE = const_cpu_to_le32(0x00000001),
* Source info flags (32-bit). Information about the source of the change(s)
* to the file. For detailed descriptions of what these mean, see the Linux
* NTFS project NTFS documentation:
- * http://linux-ntfs.sourceforge.net/ntfs/files/usnjrnl.html
+ * http://www.linux-ntfs.org/
*/
enum {
USN_SOURCE_DATA_MANAGEMENT = const_cpu_to_le32(0x00000001),
goto bail;
}
- if (!ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb)) && !p_blkno) {
+ if (!ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb)) && !p_blkno && create) {
ocfs2_error(inode->i_sb,
"Inode %llu has a hole at block %llu\n",
(unsigned long long)OCFS2_I(inode)->ip_blkno,
return 0;
}
-/*
- * Use precise platform statistics if available:
- */
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
-static cputime_t task_utime(struct task_struct *p)
-{
- return p->utime;
-}
-
-static cputime_t task_stime(struct task_struct *p)
-{
- return p->stime;
-}
-#else
-static cputime_t task_utime(struct task_struct *p)
-{
- clock_t utime = cputime_to_clock_t(p->utime),
- total = utime + cputime_to_clock_t(p->stime);
- u64 temp;
-
- /*
- * Use CFS's precise accounting:
- */
- temp = (u64)nsec_to_clock_t(p->se.sum_exec_runtime);
-
- if (total) {
- temp *= utime;
- do_div(temp, total);
- }
- utime = (clock_t)temp;
-
- p->prev_utime = max(p->prev_utime, clock_t_to_cputime(utime));
- return p->prev_utime;
-}
-
-static cputime_t task_stime(struct task_struct *p)
-{
- clock_t stime;
-
- /*
- * Use CFS's precise accounting. (we subtract utime from
- * the total, to make sure the total observed by userspace
- * grows monotonically - apps rely on that):
- */
- stime = nsec_to_clock_t(p->se.sum_exec_runtime) -
- cputime_to_clock_t(task_utime(p));
-
- if (stime >= 0)
- p->prev_stime = max(p->prev_stime, clock_t_to_cputime(stime));
-
- return p->prev_stime;
-}
-#endif
-
-static cputime_t task_gtime(struct task_struct *p)
-{
- return p->gtime;
-}
-
static int do_task_stat(struct seq_file *m, struct pid_namespace *ns,
struct pid *pid, struct task_struct *task, int whole)
{
#include <linux/tty.h>
#include <linux/string.h>
#include <linux/mman.h>
+#include <linux/quicklist.h>
#include <linux/proc_fs.h>
#include <linux/ioport.h>
#include <linux/mm.h>
"Committed_AS: %8lu kB\n"
"VmallocTotal: %8lu kB\n"
"VmallocUsed: %8lu kB\n"
- "VmallocChunk: %8lu kB\n",
+ "VmallocChunk: %8lu kB\n"
+ "Quicklists: %8lu kB\n",
K(i.totalram),
K(i.freeram),
K(i.bufferram),
K(committed),
(unsigned long)VMALLOC_TOTAL >> 10,
vmi.used >> 10,
- vmi.largest_chunk >> 10
+ vmi.largest_chunk >> 10,
+ K(quicklist_total_size())
);
len += hugetlb_report_meminfo(page + len);
int subtract_lebs;
long long available;
- /*
- * Force the amount available to the total size reported if the used
- * space is zero.
- */
- if (c->lst.total_used <= UBIFS_INO_NODE_SZ &&
- c->budg_data_growth + c->budg_dd_growth == 0) {
- /* Do the same calculation as for c->block_cnt */
- available = c->main_lebs - 2;
- available *= c->leb_size - c->dark_wm;
- return available;
- }
-
available = c->main_bytes - c->lst.total_used;
/*
}
/**
- * ubifs_budg_get_free_space - return amount of free space.
+ * ubifs_reported_space - calculate reported free space.
+ * @c: the UBIFS file-system description object
+ * @free: amount of free space
+ *
+ * This function calculates amount of free space which will be reported to
+ * user-space. User-space application tend to expect that if the file-system
+ * (e.g., via the 'statfs()' call) reports that it has N bytes available, they
+ * are able to write a file of size N. UBIFS attaches node headers to each data
+ * node and it has to write indexind nodes as well. This introduces additional
+ * overhead, and UBIFS it has to report sligtly less free space to meet the
+ * above expectetion.
+ *
+ * This function assumes free space is made up of uncompressed data nodes and
+ * full index nodes (one per data node, tripled because we always allow enough
+ * space to write the index thrice).
+ *
+ * Note, the calculation is pessimistic, which means that most of the time
+ * UBIFS reports less space than it actually has.
+ */
+long long ubifs_reported_space(const struct ubifs_info *c, uint64_t free)
+{
+ int divisor, factor, f;
+
+ /*
+ * Reported space size is @free * X, where X is UBIFS block size
+ * divided by UBIFS block size + all overhead one data block
+ * introduces. The overhead is the node header + indexing overhead.
+ *
+ * Indexing overhead calculations are based on the following formula:
+ * I = N/(f - 1) + 1, where I - number of indexing nodes, N - number
+ * of data nodes, f - fanout. Because effective UBIFS fanout is twice
+ * as less than maximum fanout, we assume that each data node
+ * introduces 3 * @c->max_idx_node_sz / (@c->fanout/2 - 1) bytes.
+ * Note, the multiplier 3 is because UBIFS reseves thrice as more space
+ * for the index.
+ */
+ f = c->fanout > 3 ? c->fanout >> 1 : 2;
+ factor = UBIFS_BLOCK_SIZE;
+ divisor = UBIFS_MAX_DATA_NODE_SZ;
+ divisor += (c->max_idx_node_sz * 3) / (f - 1);
+ free *= factor;
+ do_div(free, divisor);
+ return free;
+}
+
+/**
+ * ubifs_get_free_space - return amount of free space.
* @c: UBIFS file-system description object
*
- * This function returns amount of free space on the file-system.
+ * This function calculates amount of free space to report to user-space.
+ *
+ * Because UBIFS may introduce substantial overhead (the index, node headers,
+ * alighment, wastage at the end of eraseblocks, etc), it cannot report real
+ * amount of free flash space it has (well, because not all dirty space is
+ * reclamable, UBIFS does not actually know the real amount). If UBIFS did so,
+ * it would bread user expectetion about what free space is. Users seem to
+ * accustomed to assume that if the file-system reports N bytes of free space,
+ * they would be able to fit a file of N bytes to the FS. This almost works for
+ * traditional file-systems, because they have way less overhead than UBIFS.
+ * So, to keep users happy, UBIFS tries to take the overhead into account.
*/
-long long ubifs_budg_get_free_space(struct ubifs_info *c)
+long long ubifs_get_free_space(struct ubifs_info *c)
{
- int min_idx_lebs, rsvd_idx_lebs;
+ int min_idx_lebs, rsvd_idx_lebs, lebs;
long long available, outstanding, free;
- /* Do exactly the same calculations as in 'do_budget_space()' */
spin_lock(&c->space_lock);
min_idx_lebs = ubifs_calc_min_idx_lebs(c);
+ outstanding = c->budg_data_growth + c->budg_dd_growth;
- if (min_idx_lebs > c->lst.idx_lebs)
- rsvd_idx_lebs = min_idx_lebs - c->lst.idx_lebs;
- else
- rsvd_idx_lebs = 0;
-
- if (rsvd_idx_lebs > c->lst.empty_lebs + c->freeable_cnt + c->idx_gc_cnt
- - c->lst.taken_empty_lebs) {
+ /*
+ * Force the amount available to the total size reported if the used
+ * space is zero.
+ */
+ if (c->lst.total_used <= UBIFS_INO_NODE_SZ && !outstanding) {
spin_unlock(&c->space_lock);
- return 0;
+ return (long long)c->block_cnt << UBIFS_BLOCK_SHIFT;
}
available = ubifs_calc_available(c, min_idx_lebs);
- outstanding = c->budg_data_growth + c->budg_dd_growth;
- c->min_idx_lebs = min_idx_lebs;
+
+ /*
+ * When reporting free space to user-space, UBIFS guarantees that it is
+ * possible to write a file of free space size. This means that for
+ * empty LEBs we may use more precise calculations than
+ * 'ubifs_calc_available()' is using. Namely, we know that in empty
+ * LEBs we would waste only @c->leb_overhead bytes, not @c->dark_wm.
+ * Thus, amend the available space.
+ *
+ * Note, the calculations below are similar to what we have in
+ * 'do_budget_space()', so refer there for comments.
+ */
+ if (min_idx_lebs > c->lst.idx_lebs)
+ rsvd_idx_lebs = min_idx_lebs - c->lst.idx_lebs;
+ else
+ rsvd_idx_lebs = 0;
+ lebs = c->lst.empty_lebs + c->freeable_cnt + c->idx_gc_cnt -
+ c->lst.taken_empty_lebs;
+ lebs -= rsvd_idx_lebs;
+ available += lebs * (c->dark_wm - c->leb_overhead);
spin_unlock(&c->space_lock);
if (available > outstanding)
if (err) {
if (err != -ENOSPC)
return err;
- err = 0;
budgeted = 0;
}
int err;
struct ubifs_budget_req req;
loff_t old_size = inode->i_size, new_size = attr->ia_size;
- int offset = new_size & (UBIFS_BLOCK_SIZE - 1);
+ int offset = new_size & (UBIFS_BLOCK_SIZE - 1), budgeted = 1;
struct ubifs_inode *ui = ubifs_inode(inode);
dbg_gen("ino %lu, size %lld -> %lld", inode->i_ino, old_size, new_size);
/* A funny way to budget for truncation node */
req.dirtied_ino_d = UBIFS_TRUN_NODE_SZ;
err = ubifs_budget_space(c, &req);
- if (err)
- return err;
+ if (err) {
+ /*
+ * Treat truncations to zero as deletion and always allow them,
+ * just like we do for '->unlink()'.
+ */
+ if (new_size || err != -ENOSPC)
+ return err;
+ budgeted = 0;
+ }
err = vmtruncate(inode, new_size);
if (err)
err = ubifs_jnl_truncate(c, inode, old_size, new_size);
mutex_unlock(&ui->ui_mutex);
out_budg:
- ubifs_release_budget(c, &req);
+ if (budgeted)
+ ubifs_release_budget(c, &req);
+ else {
+ c->nospace = c->nospace_rp = 0;
+ smp_wmb();
+ }
return err;
}
* dirty index heap, and it falls-back to LPT scanning if the heaps are empty
* or do not have an LEB which satisfies the @min_space criteria.
*
- * Note:
- * o LEBs which have less than dead watermark of dirty space are never picked
- * by this function;
- *
- * Returns zero and the LEB properties of
- * found dirty LEB in case of success, %-ENOSPC if no dirty LEB was found and a
- * negative error code in case of other failures. The returned LEB is marked as
- * "taken".
+ * Note, LEBs which have less than dead watermark of free + dirty space are
+ * never picked by this function.
*
* The additional @pick_free argument controls if this function has to return a
* free or freeable LEB if one is present. For example, GC must to set it to %1,
*
* In addition @pick_free is set to %2 by the recovery process in order to
* recover gc_lnum in which case an index LEB must not be returned.
+ *
+ * This function returns zero and the LEB properties of found dirty LEB in case
+ * of success, %-ENOSPC if no dirty LEB was found and a negative error code in
+ * case of other failures. The returned LEB is marked as "taken".
*/
int ubifs_find_dirty_leb(struct ubifs_info *c, struct ubifs_lprops *ret_lp,
int min_space, int pick_free)
int lebs, rsvd_idx_lebs = 0;
spin_lock(&c->space_lock);
- lebs = c->lst.empty_lebs;
+ lebs = c->lst.empty_lebs + c->idx_gc_cnt;
lebs += c->freeable_cnt - c->lst.taken_empty_lebs;
/*
lp = idx_lp;
if (lp) {
- ubifs_assert(lp->dirty >= c->dead_wm);
+ ubifs_assert(lp->free + lp->dirty >= c->dead_wm);
goto found;
}
if (err)
goto out;
+ /* Allow for races with TNC */
+ c->gced_lnum = lnum;
+ smp_wmb();
+ c->gc_seq += 1;
+ smp_wmb();
+
if (c->gc_lnum == -1) {
c->gc_lnum = lnum;
err = LEB_RETAINED;
return (void *)((struct ubifs_branch *)idx->branches)->key;
}
-/**
- * ubifs_reported_space - calculate reported free space.
- * @c: the UBIFS file-system description object
- * @free: amount of free space
- *
- * This function calculates amount of free space which will be reported to
- * user-space. User-space application tend to expect that if the file-system
- * (e.g., via the 'statfs()' call) reports that it has N bytes available, they
- * are able to write a file of size N. UBIFS attaches node headers to each data
- * node and it has to write indexind nodes as well. This introduces additional
- * overhead, and UBIFS it has to report sligtly less free space to meet the
- * above expectetion.
- *
- * This function assumes free space is made up of uncompressed data nodes and
- * full index nodes (one per data node, doubled because we always allow enough
- * space to write the index twice).
- *
- * Note, the calculation is pessimistic, which means that most of the time
- * UBIFS reports less space than it actually has.
- */
-static inline long long ubifs_reported_space(const struct ubifs_info *c,
- uint64_t free)
-{
- int divisor, factor;
-
- divisor = UBIFS_MAX_DATA_NODE_SZ + (c->max_idx_node_sz * 3);
- factor = UBIFS_MAX_DATA_NODE_SZ - UBIFS_DATA_NODE_SZ;
- do_div(free, divisor);
-
- return free * factor;
-}
-
/**
* ubifs_current_time - round current time to time granularity.
* @inode: inode
current_fs_time(inode->i_sb) : CURRENT_TIME_SEC;
}
+/**
+ * ubifs_tnc_lookup - look up a file-system node.
+ * @c: UBIFS file-system description object
+ * @key: node key to lookup
+ * @node: the node is returned here
+ *
+ * This function look up and reads node with key @key. The caller has to make
+ * sure the @node buffer is large enough to fit the node. Returns zero in case
+ * of success, %-ENOENT if the node was not found, and a negative error code in
+ * case of failure.
+ */
+static inline int ubifs_tnc_lookup(struct ubifs_info *c,
+ const union ubifs_key *key, void *node)
+{
+ return ubifs_tnc_locate(c, key, node, NULL, NULL);
+}
+
#endif /* __UBIFS_MISC_H__ */
{
struct ubifs_info *c = dentry->d_sb->s_fs_info;
unsigned long long free;
+ __le32 *uuid = (__le32 *)c->uuid;
- free = ubifs_budg_get_free_space(c);
+ free = ubifs_get_free_space(c);
dbg_gen("free space %lld bytes (%lld blocks)",
free, free >> UBIFS_BLOCK_SHIFT);
buf->f_files = 0;
buf->f_ffree = 0;
buf->f_namelen = UBIFS_MAX_NLEN;
-
+ buf->f_fsid.val[0] = le32_to_cpu(uuid[0]) ^ le32_to_cpu(uuid[2]);
+ buf->f_fsid.val[1] = le32_to_cpu(uuid[1]) ^ le32_to_cpu(uuid[3]);
return 0;
}
c->dead_wm = ALIGN(MIN_WRITE_SZ, c->min_io_size);
c->dark_wm = ALIGN(UBIFS_MAX_NODE_SZ, c->min_io_size);
+ /*
+ * Calculate how many bytes would be wasted at the end of LEB if it was
+ * fully filled with data nodes of maximum size. This is used in
+ * calculations when reporting free space.
+ */
+ c->leb_overhead = c->leb_size % UBIFS_MAX_DATA_NODE_SZ;
return 0;
}
* internally because it does not make much sense for UBIFS, but it is
* necessary to report something for the 'statfs()' call.
*
- * Subtract the LEB reserved for GC and the LEB which is reserved for
- * deletions.
- *
- * Review 'ubifs_calc_available()' if changing this calculation.
+ * Subtract the LEB reserved for GC, the LEB which is reserved for
+ * deletions, and assume only one journal head is available.
*/
- tmp64 = c->main_lebs - 2;
- tmp64 *= (uint64_t)c->leb_size - c->dark_wm;
+ tmp64 = c->main_lebs - 2 - c->jhead_cnt + 1;
+ tmp64 *= (uint64_t)c->leb_size - c->leb_overhead;
tmp64 = ubifs_reported_space(c, tmp64);
c->block_cnt = tmp64 >> UBIFS_BLOCK_SHIFT;
if (keys_cmp(c, key, &node_key) != 0)
ret = 0;
}
- if (ret == 0)
+ if (ret == 0 && c->replaying)
dbg_mnt("dangling branch LEB %d:%d len %d, key %s",
zbr->lnum, zbr->offs, zbr->len, DBGKEY(key));
return ret;
}
/**
- * ubifs_tnc_lookup - look up a file-system node.
+ * maybe_leb_gced - determine if a LEB may have been garbage collected.
* @c: UBIFS file-system description object
- * @key: node key to lookup
- * @node: the node is returned here
+ * @lnum: LEB number
+ * @gc_seq1: garbage collection sequence number
*
- * This function look up and reads node with key @key. The caller has to make
- * sure the @node buffer is large enough to fit the node. Returns zero in case
- * of success, %-ENOENT if the node was not found, and a negative error code in
- * case of failure.
+ * This function determines if @lnum may have been garbage collected since
+ * sequence number @gc_seq1. If it may have been then %1 is returned, otherwise
+ * %0 is returned.
*/
-int ubifs_tnc_lookup(struct ubifs_info *c, const union ubifs_key *key,
- void *node)
+static int maybe_leb_gced(struct ubifs_info *c, int lnum, int gc_seq1)
{
- int found, n, err;
- struct ubifs_znode *znode;
- struct ubifs_zbranch zbr, *zt;
+ int gc_seq2, gced_lnum;
- mutex_lock(&c->tnc_mutex);
- found = ubifs_lookup_level0(c, key, &znode, &n);
- if (!found) {
- err = -ENOENT;
- goto out;
- } else if (found < 0) {
- err = found;
- goto out;
- }
- zt = &znode->zbranch[n];
- if (is_hash_key(c, key)) {
- /*
- * In this case the leaf node cache gets used, so we pass the
- * address of the zbranch and keep the mutex locked
- */
- err = tnc_read_node_nm(c, zt, node);
- goto out;
- }
- zbr = znode->zbranch[n];
- mutex_unlock(&c->tnc_mutex);
-
- err = ubifs_tnc_read_node(c, &zbr, node);
- return err;
-
-out:
- mutex_unlock(&c->tnc_mutex);
- return err;
+ gced_lnum = c->gced_lnum;
+ smp_rmb();
+ gc_seq2 = c->gc_seq;
+ /* Same seq means no GC */
+ if (gc_seq1 == gc_seq2)
+ return 0;
+ /* Different by more than 1 means we don't know */
+ if (gc_seq1 + 1 != gc_seq2)
+ return 1;
+ /*
+ * We have seen the sequence number has increased by 1. Now we need to
+ * be sure we read the right LEB number, so read it again.
+ */
+ smp_rmb();
+ if (gced_lnum != c->gced_lnum)
+ return 1;
+ /* Finally we can check lnum */
+ if (gced_lnum == lnum)
+ return 1;
+ return 0;
}
/**
* @lnum: LEB number is returned here
* @offs: offset is returned here
*
- * This function is the same as 'ubifs_tnc_lookup()' but it returns the node
- * location also. See 'ubifs_tnc_lookup()'.
+ * This function look up and reads node with key @key. The caller has to make
+ * sure the @node buffer is large enough to fit the node. Returns zero in case
+ * of success, %-ENOENT if the node was not found, and a negative error code in
+ * case of failure. The node location can be returned in @lnum and @offs.
*/
int ubifs_tnc_locate(struct ubifs_info *c, const union ubifs_key *key,
void *node, int *lnum, int *offs)
{
- int found, n, err;
+ int found, n, err, safely = 0, gc_seq1;
struct ubifs_znode *znode;
struct ubifs_zbranch zbr, *zt;
+again:
mutex_lock(&c->tnc_mutex);
found = ubifs_lookup_level0(c, key, &znode, &n);
if (!found) {
goto out;
}
zt = &znode->zbranch[n];
+ if (lnum) {
+ *lnum = zt->lnum;
+ *offs = zt->offs;
+ }
if (is_hash_key(c, key)) {
/*
* In this case the leaf node cache gets used, so we pass the
* address of the zbranch and keep the mutex locked
*/
- *lnum = zt->lnum;
- *offs = zt->offs;
err = tnc_read_node_nm(c, zt, node);
goto out;
}
+ if (safely) {
+ err = ubifs_tnc_read_node(c, zt, node);
+ goto out;
+ }
+ /* Drop the TNC mutex prematurely and race with garbage collection */
zbr = znode->zbranch[n];
+ gc_seq1 = c->gc_seq;
mutex_unlock(&c->tnc_mutex);
- *lnum = zbr.lnum;
- *offs = zbr.offs;
+ if (ubifs_get_wbuf(c, zbr.lnum)) {
+ /* We do not GC journal heads */
+ err = ubifs_tnc_read_node(c, &zbr, node);
+ return err;
+ }
- err = ubifs_tnc_read_node(c, &zbr, node);
- return err;
+ err = fallible_read_node(c, key, &zbr, node);
+ if (maybe_leb_gced(c, zbr.lnum, gc_seq1)) {
+ /*
+ * The node may have been GC'ed out from under us so try again
+ * while keeping the TNC mutex locked.
+ */
+ safely = 1;
+ goto again;
+ }
+ return 0;
out:
mutex_unlock(&c->tnc_mutex);
{
int found, n, err;
struct ubifs_znode *znode;
- struct ubifs_zbranch zbr;
dbg_tnc("name '%.*s' key %s", nm->len, nm->name, DBGKEY(key));
mutex_lock(&c->tnc_mutex);
goto out_unlock;
}
- zbr = znode->zbranch[n];
- mutex_unlock(&c->tnc_mutex);
-
- err = tnc_read_node_nm(c, &zbr, node);
- return err;
+ err = tnc_read_node_nm(c, &znode->zbranch[n], node);
out_unlock:
mutex_unlock(&c->tnc_mutex);
#define UBIFS_SK_LEN 8
/* Minimum index tree fanout */
-#define UBIFS_MIN_FANOUT 2
+#define UBIFS_MIN_FANOUT 3
/* Maximum number of levels in UBIFS indexing B-tree */
#define UBIFS_MAX_LEVELS 512
* @max_idx_node_sz: maximum indexing node aligned on 8-bytes boundary
* @max_inode_sz: maximum possible inode size in bytes
* @max_znode_sz: size of znode in bytes
+ *
+ * @leb_overhead: how many bytes are wasted in an LEB when it is filled with
+ * data nodes of maximum size - used in free space reporting
* @dead_wm: LEB dead space watermark
* @dark_wm: LEB dark space watermark
* @block_cnt: count of 4KiB blocks on the FS
* @sbuf: a buffer of LEB size used by GC and replay for scanning
* @idx_gc: list of index LEBs that have been garbage collected
* @idx_gc_cnt: number of elements on the idx_gc list
+ * @gc_seq: incremented for every non-index LEB garbage collected
+ * @gced_lnum: last non-index LEB that was garbage collected
*
* @infos_list: links all 'ubifs_info' objects
* @umount_mutex: serializes shrinker and un-mount
int max_idx_node_sz;
long long max_inode_sz;
int max_znode_sz;
+
+ int leb_overhead;
int dead_wm;
int dark_wm;
int block_cnt;
void *sbuf;
struct list_head idx_gc;
int idx_gc_cnt;
+ volatile int gc_seq;
+ volatile int gced_lnum;
struct list_head infos_list;
struct mutex umount_mutex;
struct ubifs_budget_req *req);
void ubifs_cancel_ino_op(struct ubifs_info *c, struct inode *inode,
struct ubifs_budget_req *req);
-long long ubifs_budg_get_free_space(struct ubifs_info *c);
+long long ubifs_get_free_space(struct ubifs_info *c);
int ubifs_calc_min_idx_lebs(struct ubifs_info *c);
void ubifs_convert_page_budget(struct ubifs_info *c);
+long long ubifs_reported_space(const struct ubifs_info *c, uint64_t free);
long long ubifs_calc_available(const struct ubifs_info *c, int min_idx_lebs);
/* find.c */
/* tnc.c */
int ubifs_lookup_level0(struct ubifs_info *c, const union ubifs_key *key,
struct ubifs_znode **zn, int *n);
-int ubifs_tnc_lookup(struct ubifs_info *c, const union ubifs_key *key,
- void *node);
int ubifs_tnc_lookup_nm(struct ubifs_info *c, const union ubifs_key *key,
void *node, const struct qstr *nm);
int ubifs_tnc_locate(struct ubifs_info *c, const union ubifs_key *key,
.release = udf_release_file,
.fsync = udf_fsync_file,
.splice_read = generic_file_splice_read,
+ .llseek = generic_file_llseek,
};
const struct inode_operations udf_file_inode_operations = {
*err = -ENOSPC;
iinfo = UDF_I(inode);
- iinfo->i_unique = 0;
- iinfo->i_lenExtents = 0;
- iinfo->i_next_alloc_block = 0;
- iinfo->i_next_alloc_goal = 0;
- iinfo->i_strat4096 = 0;
+ if (UDF_QUERY_FLAG(inode->i_sb, UDF_FLAG_USE_EXTENDED_FE)) {
+ iinfo->i_efe = 1;
+ if (UDF_VERS_USE_EXTENDED_FE > sbi->s_udfrev)
+ sbi->s_udfrev = UDF_VERS_USE_EXTENDED_FE;
+ iinfo->i_ext.i_data = kzalloc(inode->i_sb->s_blocksize -
+ sizeof(struct extendedFileEntry),
+ GFP_KERNEL);
+ } else {
+ iinfo->i_efe = 0;
+ iinfo->i_ext.i_data = kzalloc(inode->i_sb->s_blocksize -
+ sizeof(struct fileEntry),
+ GFP_KERNEL);
+ }
+ if (!iinfo->i_ext.i_data) {
+ iput(inode);
+ *err = -ENOMEM;
+ return NULL;
+ }
block = udf_new_block(dir->i_sb, NULL,
dinfo->i_location.partitionReferenceNum,
lvhd->uniqueID = cpu_to_le64(uniqueID);
mark_buffer_dirty(sbi->s_lvid_bh);
}
+ mutex_unlock(&sbi->s_alloc_mutex);
inode->i_mode = mode;
inode->i_uid = current->fsuid;
if (dir->i_mode & S_ISGID) {
iinfo->i_lenEAttr = 0;
iinfo->i_lenAlloc = 0;
iinfo->i_use = 0;
- if (UDF_QUERY_FLAG(inode->i_sb, UDF_FLAG_USE_EXTENDED_FE)) {
- iinfo->i_efe = 1;
- if (UDF_VERS_USE_EXTENDED_FE > sbi->s_udfrev)
- sbi->s_udfrev = UDF_VERS_USE_EXTENDED_FE;
- iinfo->i_ext.i_data = kzalloc(inode->i_sb->s_blocksize -
- sizeof(struct extendedFileEntry),
- GFP_KERNEL);
- } else {
- iinfo->i_efe = 0;
- iinfo->i_ext.i_data = kzalloc(inode->i_sb->s_blocksize -
- sizeof(struct fileEntry),
- GFP_KERNEL);
- }
- if (!iinfo->i_ext.i_data) {
- iput(inode);
- *err = -ENOMEM;
- mutex_unlock(&sbi->s_alloc_mutex);
- return NULL;
- }
if (UDF_QUERY_FLAG(inode->i_sb, UDF_FLAG_USE_AD_IN_ICB))
iinfo->i_alloc_type = ICBTAG_FLAG_AD_IN_ICB;
else if (UDF_QUERY_FLAG(inode->i_sb, UDF_FLAG_USE_SHORT_AD))
iinfo->i_crtime = current_fs_time(inode->i_sb);
insert_inode_hash(inode);
mark_inode_dirty(inode);
- mutex_unlock(&sbi->s_alloc_mutex);
if (DQUOT_ALLOC_INODE(inode)) {
DQUOT_DROP(inode);
-ifneq ($(wildcard $(srctree)/include/asm-$(SRCARCH)/kvm.h),)
+ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/kvm.h \
+ $(srctree)/include/asm-$(SRCARCH)/kvm.h),)
header-y += kvm.h
endif
-ifneq ($(wildcard $(srctree)/include/asm-$(SRCARCH)/a.out.h),)
+ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/a.out.h \
+ $(srctree)/include/asm-$(SRCARCH)/a.out.h),)
unifdef-y += a.out.h
endif
unifdef-y += auxvec.h
extern char __initdata_begin[], __initdata_end[];
extern char __start_rodata[], __end_rodata[];
+/* function descriptor handling (if any). Override
+ * in asm/sections.h */
+#ifndef dereference_function_descriptor
+#define dereference_function_descriptor(p) (p)
+#endif
+
#endif /* _ASM_GENERIC_SECTIONS_H_ */
* @args: array of argument values to store
*
* Changes @n arguments to the system call starting with the @i'th argument.
- * @n'th argument to @val. Argument @i gets value @args[0], and so on.
+ * Argument @i gets value @args[0], and so on.
* An arch inline version is probably optimal when @i and @n are constants.
*
* It's only valid to call this when @task is stopped for tracing on
}
extern void (*flush_icache_range)(unsigned long start, unsigned long end);
+extern void (*local_flush_icache_range)(unsigned long start, unsigned long end);
extern void (*__flush_cache_vmap)(void);
/* nothing to see, move along */
#include <asm-generic/sections.h>
+#ifdef CONFIG_64BIT
+#undef dereference_function_descriptor
+void *dereference_function_descriptor(void *);
+#endif
+
#endif
#define X86_FEATURE_UP (3*32+ 9) /* smp kernel running on up */
#define X86_FEATURE_FXSAVE_LEAK (3*32+10) /* FXSAVE leaks FOP/FIP/FOP */
#define X86_FEATURE_ARCH_PERFMON (3*32+11) /* Intel Architectural PerfMon */
-#define X86_FEATURE_PEBS (3*32+12) /* Precise-Event Based Sampling */
-#define X86_FEATURE_BTS (3*32+13) /* Branch Trace Store */
-#define X86_FEATURE_SYSCALL32 (3*32+14) /* syscall in ia32 userspace */
-#define X86_FEATURE_SYSENTER32 (3*32+15) /* sysenter in ia32 userspace */
+#define X86_FEATURE_PEBS (3*32+12) /* Precise-Event Based Sampling */
+#define X86_FEATURE_BTS (3*32+13) /* Branch Trace Store */
+#define X86_FEATURE_SYSCALL32 (3*32+14) /* syscall in ia32 userspace */
+#define X86_FEATURE_SYSENTER32 (3*32+15) /* sysenter in ia32 userspace */
#define X86_FEATURE_REP_GOOD (3*32+16) /* rep microcode works well on this CPU */
#define X86_FEATURE_MFENCE_RDTSC (3*32+17) /* Mfence synchronizes RDTSC */
#define X86_FEATURE_LFENCE_RDTSC (3*32+18) /* Lfence synchronizes RDTSC */
-#define X86_FEATURE_11AP (3*32+19) /* Bad local APIC aka 11AP */
+#define X86_FEATURE_11AP (3*32+19) /* Bad local APIC aka 11AP */
+#define X86_FEATURE_NOPL (3*32+20) /* The NOPL (0F 1F) instructions */
/* Intel-defined CPU features, CPUID level 0x00000001 (ecx), word 4 */
#define X86_FEATURE_XMM3 (4*32+ 0) /* Streaming SIMD Extensions-3 */
# define NEED_3DNOW 0
#endif
+#if defined(CONFIG_X86_P6_NOP) || defined(CONFIG_X86_64)
+# define NEED_NOPL (1<<(X86_FEATURE_NOPL & 31))
+#else
+# define NEED_NOPL 0
+#endif
+
#ifdef CONFIG_X86_64
#define NEED_PSE 0
#define NEED_MSR (1<<(X86_FEATURE_MSR & 31))
#define REQUIRED_MASK1 (NEED_LM|NEED_3DNOW)
#define REQUIRED_MASK2 0
-#define REQUIRED_MASK3 0
+#define REQUIRED_MASK3 (NEED_NOPL)
#define REQUIRED_MASK4 0
#define REQUIRED_MASK5 0
#define REQUIRED_MASK6 0
unifdef-y += adb.h
unifdef-y += adfs_fs.h
unifdef-y += agpgart.h
-ifneq ($(wildcard $(srctree)/include/asm-$(SRCARCH)/a.out.h),)
+ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/a.out.h \
+ $(srctree)/include/asm-$(SRCARCH)/a.out.h),)
unifdef-y += a.out.h
endif
unifdef-y += apm_bios.h
unifdef-y += kernelcapi.h
unifdef-y += kernel.h
unifdef-y += keyboard.h
-ifneq ($(wildcard $(srctree)/include/asm-$(SRCARCH)/kvm.h),)
+ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/kvm.h \
+ $(srctree)/include/asm-$(SRCARCH)/kvm.h),)
unifdef-y += kvm.h
endif
unifdef-y += llc.h
unifdef-y += patchkey.h
unifdef-y += pci.h
unifdef-y += personality.h
-unifdef-y += pim.h
unifdef-y += pktcdvd.h
unifdef-y += pmu.h
unifdef-y += poll.h
extern int clockevents_program_event(struct clock_event_device *dev,
ktime_t expires, ktime_t now);
+extern void clockevents_handle_noop(struct clock_event_device *dev);
+
#ifdef CONFIG_GENERIC_CLOCKEVENTS
extern void clockevents_notify(unsigned long reason, void *arg);
#else
static inline void rebuild_sched_domains(void)
{
- partition_sched_domains(0, NULL, NULL);
+ partition_sched_domains(1, NULL, NULL);
}
#endif /* !CONFIG_CPUSETS */
#ifdef CONFIG_BLK_DEV_IDEDMA_PCI
int ide_pci_set_master(struct pci_dev *, const char *);
unsigned long ide_pci_dma_base(ide_hwif_t *, const struct ide_port_info *);
-extern const struct ide_dma_ops sff_dma_ops;
int ide_pci_check_simplex(ide_hwif_t *, const struct ide_port_info *);
int ide_hwif_setup_dma(ide_hwif_t *, const struct ide_port_info *);
#else
int ide_dma_test_irq(ide_drive_t *);
extern void ide_dma_lost_irq(ide_drive_t *);
extern void ide_dma_timeout(ide_drive_t *);
+extern const struct ide_dma_ops sff_dma_ops;
#endif /* CONFIG_BLK_DEV_IDEDMA_SFF */
#else
static inline int hwif_to_node(ide_hwif_t *hwif)
{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- return hwif->dev ? pcibus_to_node(dev->bus) : -1;
+ return hwif->dev ? dev_to_node(hwif->dev) : -1;
}
static inline ide_drive_t *ide_get_paired_drive(ide_drive_t *drive)
extern int request_resource(struct resource *root, struct resource *new);
extern int release_resource(struct resource *new);
extern int insert_resource(struct resource *parent, struct resource *new);
+extern void insert_resource_expand_to_fit(struct resource *root, struct resource *new);
extern int allocate_resource(struct resource *root, struct resource *new,
resource_size_t size, resource_size_t min,
resource_size_t max, resource_size_t align,
next->next->pprev = &next->next;
}
+/*
+ * Move a list from one list head to another. Fixup the pprev
+ * reference of the first entry if it exists.
+ */
+static inline void hlist_move_list(struct hlist_head *old,
+ struct hlist_head *new)
+{
+ new->first = old->first;
+ if (new->first)
+ new->first->pprev = &new->first;
+ old->first = NULL;
+}
+
#define hlist_entry(ptr, type, member) container_of(ptr,type,member)
#define hlist_for_each(pos, head) \
#ifdef __KERNEL__
#include <linux/in.h>
#endif
-#include <linux/pim.h>
/*
* Based on the MROUTING 3.5 defines primarily to keep
*/
#ifdef __KERNEL__
+#include <linux/pim.h>
#include <net/sock.h>
#ifdef CONFIG_IP_MROUTE
#ifdef __KERNEL__
+#include <linux/pim.h>
#include <linux/skbuff.h> /* for struct sk_buff_head */
#ifdef CONFIG_IPV6_MROUTE
#include <asm/byteorder.h>
-#ifndef __KERNEL__
-struct pim {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
- __u8 pim_type:4, /* PIM message type */
- pim_ver:4; /* PIM version */
-#elif defined(__BIG_ENDIAN_BITFIELD)
- __u8 pim_ver:4; /* PIM version */
- pim_type:4; /* PIM message type */
-#endif
- __u8 pim_rsv; /* Reserved */
- __be16 pim_cksum; /* Checksum */
-};
-
-#define PIM_MINLEN 8
-#endif
-
/* Message types - V1 */
#define PIM_V1_VERSION __constant_htonl(0x10000000)
#define PIM_V1_REGISTER 1
#define PIM_VERSION 2
#define PIM_REGISTER 1
-#if defined(__KERNEL__)
#define PIM_NULL_REGISTER __constant_htonl(0x40000000)
/* PIMv2 register message header layout (ietf-draft-idmr-pimvsm-v2-00.ps */
struct sk_buff;
extern int pim_rcv_v1(struct sk_buff *);
#endif
-#endif
unsigned long quicklist_total_size(void);
+#else
+
+static inline unsigned long quicklist_total_size(void)
+{
+ return 0;
+}
+
#endif
#endif /* LINUX_QUICKLIST_H */
int ret = -EBUSY;
spin_lock_irqsave(&cnt->lock, flags);
- if (cnt->usage < limit) {
+ if (cnt->usage <= limit) {
cnt->limit = limit;
ret = 0;
}
__put_task_struct(t);
}
+extern cputime_t task_utime(struct task_struct *p);
+extern cputime_t task_stime(struct task_struct *p);
+extern cputime_t task_gtime(struct task_struct *p);
+
/*
* Per process flags
*/
unsigned long sc_flags;
struct list_head sc_dto_q; /* DTO tasklet I/O pending Q */
struct list_head sc_read_complete_q;
- spinlock_t sc_read_complete_lock;
struct work_struct sc_work;
};
/* sc_flags */
* tracehook_report_clone_complete(). This must prevent the child from
* self-reaping if tracehook_report_clone_complete() uses the @child
* pointer; otherwise it might have died and been released by the time
- * tracehook_report_report_clone_complete() is called.
+ * tracehook_report_clone_complete() is called.
*
* Called with no locks held, but the child cannot run until this returns.
*/
#define V4L2_PIX_FMT_SPCA508 v4l2_fourcc('S', '5', '0', '8') /* YUVY per line */
#define V4L2_PIX_FMT_SPCA561 v4l2_fourcc('S', '5', '6', '1') /* compressed GBRG bayer */
#define V4L2_PIX_FMT_PAC207 v4l2_fourcc('P', '2', '0', '7') /* compressed BGGR bayer */
+#define V4L2_PIX_FMT_PJPG v4l2_fourcc('P', 'J', 'P', 'G') /* Pixart 73xx JPEG */
+#define V4L2_PIX_FMT_YVYU v4l2_fourcc('Y', 'V', 'Y', 'U') /* 16 YVU 4:2:2 */
/*
* F O R M A T E N U M E R A T I O N
void hci_conn_hash_flush(struct hci_dev *hdev);
void hci_conn_check_pending(struct hci_dev *hdev);
-struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *src);
+struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst, __u8 auth_type);
+int hci_conn_check_link_mode(struct hci_conn *conn);
int hci_conn_auth(struct hci_conn *conn);
int hci_conn_encrypt(struct hci_conn *conn);
int hci_conn_change_link_key(struct hci_conn *conn);
extern void inet_twsk_deschedule(struct inet_timewait_sock *tw,
struct inet_timewait_death_row *twdr);
+extern void inet_twsk_purge(struct net *net, struct inet_hashinfo *hashinfo,
+ struct inet_timewait_death_row *twdr, int family);
+
static inline
struct net *twsk_net(const struct inet_timewait_sock *twsk)
{
static int audit_match_perm(struct audit_context *ctx, int mask)
{
+ unsigned n;
if (unlikely(!ctx))
return 0;
- unsigned n = ctx->major;
+ n = ctx->major;
switch (audit_classify_syscall(ctx->arch, n)) {
case 0: /* native */
if ((mask & AUDIT_PERM_WRITE) &&
* 2003-10-22 Updates by Stephen Hemminger.
* 2004 May-July Rework by Paul Jackson.
* 2006 Rework by Paul Menage to use generic cgroups
+ * 2008 Rework of the scheduler domains and CPU hotplug handling
+ * by Max Krasnyansky
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of the Linux
static DEFINE_MUTEX(callback_mutex);
-/* This is ugly, but preserves the userspace API for existing cpuset
+/*
+ * This is ugly, but preserves the userspace API for existing cpuset
* users. If someone tries to mount the "cpuset" filesystem, we
- * silently switch it to mount "cgroup" instead */
+ * silently switch it to mount "cgroup" instead
+ */
static int cpuset_get_sb(struct file_system_type *fs_type,
int flags, const char *unused_dev_name,
void *data, struct vfsmount *mnt)
}
/*
- * Helper routine for rebuild_sched_domains().
+ * Helper routine for generate_sched_domains().
* Do cpusets a, b have overlapping cpus_allowed masks?
*/
-
static int cpusets_overlap(struct cpuset *a, struct cpuset *b)
{
return cpus_intersects(a->cpus_allowed, b->cpus_allowed);
}
/*
- * rebuild_sched_domains()
- *
- * This routine will be called to rebuild the scheduler's dynamic
- * sched domains:
- * - if the flag 'sched_load_balance' of any cpuset with non-empty
- * 'cpus' changes,
- * - or if the 'cpus' allowed changes in any cpuset which has that
- * flag enabled,
- * - or if the 'sched_relax_domain_level' of any cpuset which has
- * that flag enabled and with non-empty 'cpus' changes,
- * - or if any cpuset with non-empty 'cpus' is removed,
- * - or if a cpu gets offlined.
- *
- * This routine builds a partial partition of the systems CPUs
- * (the set of non-overlappping cpumask_t's in the array 'part'
- * below), and passes that partial partition to the kernel/sched.c
- * partition_sched_domains() routine, which will rebuild the
- * schedulers load balancing domains (sched domains) as specified
- * by that partial partition. A 'partial partition' is a set of
- * non-overlapping subsets whose union is a subset of that set.
+ * generate_sched_domains()
+ *
+ * This function builds a partial partition of the systems CPUs
+ * A 'partial partition' is a set of non-overlapping subsets whose
+ * union is a subset of that set.
+ * The output of this function needs to be passed to kernel/sched.c
+ * partition_sched_domains() routine, which will rebuild the scheduler's
+ * load balancing domains (sched domains) as specified by that partial
+ * partition.
*
* See "What is sched_load_balance" in Documentation/cpusets.txt
* for a background explanation of this.
* domains when operating in the severe memory shortage situations
* that could cause allocation failures below.
*
- * Call with cgroup_mutex held. May take callback_mutex during
- * call due to the kfifo_alloc() and kmalloc() calls. May nest
- * a call to the get_online_cpus()/put_online_cpus() pair.
- * Must not be called holding callback_mutex, because we must not
- * call get_online_cpus() while holding callback_mutex. Elsewhere
- * the kernel nests callback_mutex inside get_online_cpus() calls.
- * So the reverse nesting would risk an ABBA deadlock.
+ * Must be called with cgroup_lock held.
*
* The three key local variables below are:
* q - a linked-list queue of cpuset pointers, used to implement a
* element of the partition (one sched domain) to be passed to
* partition_sched_domains().
*/
-
-void rebuild_sched_domains(void)
+static int generate_sched_domains(cpumask_t **domains,
+ struct sched_domain_attr **attributes)
{
- LIST_HEAD(q); /* queue of cpusets to be scanned*/
+ LIST_HEAD(q); /* queue of cpusets to be scanned */
struct cpuset *cp; /* scans q */
struct cpuset **csa; /* array of all cpuset ptrs */
int csn; /* how many cpuset ptrs in csa so far */
int ndoms; /* number of sched domains in result */
int nslot; /* next empty doms[] cpumask_t slot */
- csa = NULL;
+ ndoms = 0;
doms = NULL;
dattr = NULL;
+ csa = NULL;
/* Special case for the 99% of systems with one, full, sched domain */
if (is_sched_load_balance(&top_cpuset)) {
- ndoms = 1;
doms = kmalloc(sizeof(cpumask_t), GFP_KERNEL);
if (!doms)
- goto rebuild;
+ goto done;
+
dattr = kmalloc(sizeof(struct sched_domain_attr), GFP_KERNEL);
if (dattr) {
*dattr = SD_ATTR_INIT;
update_domain_attr_tree(dattr, &top_cpuset);
}
*doms = top_cpuset.cpus_allowed;
- goto rebuild;
+
+ ndoms = 1;
+ goto done;
}
csa = kmalloc(number_of_cpusets * sizeof(cp), GFP_KERNEL);
}
}
- /* Convert <csn, csa> to <ndoms, doms> */
+ /*
+ * Now we know how many domains to create.
+ * Convert <csn, csa> to <ndoms, doms> and populate cpu masks.
+ */
doms = kmalloc(ndoms * sizeof(cpumask_t), GFP_KERNEL);
- if (!doms)
- goto rebuild;
+ if (!doms) {
+ ndoms = 0;
+ goto done;
+ }
+
+ /*
+ * The rest of the code, including the scheduler, can deal with
+ * dattr==NULL case. No need to abort if alloc fails.
+ */
dattr = kmalloc(ndoms * sizeof(struct sched_domain_attr), GFP_KERNEL);
for (nslot = 0, i = 0; i < csn; i++) {
struct cpuset *a = csa[i];
+ cpumask_t *dp;
int apn = a->pn;
- if (apn >= 0) {
- cpumask_t *dp = doms + nslot;
-
- if (nslot == ndoms) {
- static int warnings = 10;
- if (warnings) {
- printk(KERN_WARNING
- "rebuild_sched_domains confused:"
- " nslot %d, ndoms %d, csn %d, i %d,"
- " apn %d\n",
- nslot, ndoms, csn, i, apn);
- warnings--;
- }
- continue;
+ if (apn < 0) {
+ /* Skip completed partitions */
+ continue;
+ }
+
+ dp = doms + nslot;
+
+ if (nslot == ndoms) {
+ static int warnings = 10;
+ if (warnings) {
+ printk(KERN_WARNING
+ "rebuild_sched_domains confused:"
+ " nslot %d, ndoms %d, csn %d, i %d,"
+ " apn %d\n",
+ nslot, ndoms, csn, i, apn);
+ warnings--;
}
+ continue;
+ }
- cpus_clear(*dp);
- if (dattr)
- *(dattr + nslot) = SD_ATTR_INIT;
- for (j = i; j < csn; j++) {
- struct cpuset *b = csa[j];
-
- if (apn == b->pn) {
- cpus_or(*dp, *dp, b->cpus_allowed);
- b->pn = -1;
- if (dattr)
- update_domain_attr_tree(dattr
- + nslot, b);
- }
+ cpus_clear(*dp);
+ if (dattr)
+ *(dattr + nslot) = SD_ATTR_INIT;
+ for (j = i; j < csn; j++) {
+ struct cpuset *b = csa[j];
+
+ if (apn == b->pn) {
+ cpus_or(*dp, *dp, b->cpus_allowed);
+ if (dattr)
+ update_domain_attr_tree(dattr + nslot, b);
+
+ /* Done with this partition */
+ b->pn = -1;
}
- nslot++;
}
+ nslot++;
}
BUG_ON(nslot != ndoms);
-rebuild:
- /* Have scheduler rebuild sched domains */
+done:
+ kfree(csa);
+
+ *domains = doms;
+ *attributes = dattr;
+ return ndoms;
+}
+
+/*
+ * Rebuild scheduler domains.
+ *
+ * Call with neither cgroup_mutex held nor within get_online_cpus().
+ * Takes both cgroup_mutex and get_online_cpus().
+ *
+ * Cannot be directly called from cpuset code handling changes
+ * to the cpuset pseudo-filesystem, because it cannot be called
+ * from code that already holds cgroup_mutex.
+ */
+static void do_rebuild_sched_domains(struct work_struct *unused)
+{
+ struct sched_domain_attr *attr;
+ cpumask_t *doms;
+ int ndoms;
+
get_online_cpus();
- partition_sched_domains(ndoms, doms, dattr);
+
+ /* Generate domain masks and attrs */
+ cgroup_lock();
+ ndoms = generate_sched_domains(&doms, &attr);
+ cgroup_unlock();
+
+ /* Have scheduler rebuild the domains */
+ partition_sched_domains(ndoms, doms, attr);
+
put_online_cpus();
+}
-done:
- kfree(csa);
- /* Don't kfree(doms) -- partition_sched_domains() does that. */
- /* Don't kfree(dattr) -- partition_sched_domains() does that. */
+static DECLARE_WORK(rebuild_sched_domains_work, do_rebuild_sched_domains);
+
+/*
+ * Rebuild scheduler domains, asynchronously via workqueue.
+ *
+ * If the flag 'sched_load_balance' of any cpuset with non-empty
+ * 'cpus' changes, or if the 'cpus' allowed changes in any cpuset
+ * which has that flag enabled, or if any cpuset with a non-empty
+ * 'cpus' is removed, then call this routine to rebuild the
+ * scheduler's dynamic sched domains.
+ *
+ * The rebuild_sched_domains() and partition_sched_domains()
+ * routines must nest cgroup_lock() inside get_online_cpus(),
+ * but such cpuset changes as these must nest that locking the
+ * other way, holding cgroup_lock() for much of the code.
+ *
+ * So in order to avoid an ABBA deadlock, the cpuset code handling
+ * these user changes delegates the actual sched domain rebuilding
+ * to a separate workqueue thread, which ends up processing the
+ * above do_rebuild_sched_domains() function.
+ */
+static void async_rebuild_sched_domains(void)
+{
+ schedule_work(&rebuild_sched_domains_work);
+}
+
+/*
+ * Accomplishes the same scheduler domain rebuild as the above
+ * async_rebuild_sched_domains(), however it directly calls the
+ * rebuild routine synchronously rather than calling it via an
+ * asynchronous work thread.
+ *
+ * This can only be called from code that is not holding
+ * cgroup_mutex (not nested in a cgroup_lock() call.)
+ */
+void rebuild_sched_domains(void)
+{
+ do_rebuild_sched_domains(NULL);
}
/**
return retval;
if (is_load_balanced)
- rebuild_sched_domains();
+ async_rebuild_sched_domains();
return 0;
}
if (val != cs->relax_domain_level) {
cs->relax_domain_level = val;
if (!cpus_empty(cs->cpus_allowed) && is_sched_load_balance(cs))
- rebuild_sched_domains();
+ async_rebuild_sched_domains();
}
return 0;
mutex_unlock(&callback_mutex);
if (cpus_nonempty && balance_flag_changed)
- rebuild_sched_domains();
+ async_rebuild_sched_domains();
return 0;
}
default:
BUG();
}
+
+ /* Unreachable but makes gcc happy */
+ return 0;
}
static s64 cpuset_read_s64(struct cgroup *cont, struct cftype *cft)
default:
BUG();
}
+
+ /* Unrechable but makes gcc happy */
+ return 0;
}
}
/*
- * Locking note on the strange update_flag() call below:
- *
* If the cpuset being removed has its flag 'sched_load_balance'
* enabled, then simulate turning sched_load_balance off, which
- * will call rebuild_sched_domains(). The get_online_cpus()
- * call in rebuild_sched_domains() must not be made while holding
- * callback_mutex. Elsewhere the kernel nests callback_mutex inside
- * get_online_cpus() calls. So the reverse nesting would risk an
- * ABBA deadlock.
+ * will call async_rebuild_sched_domains().
*/
static void cpuset_destroy(struct cgroup_subsys *ss, struct cgroup *cont)
struct cgroup_subsys cpuset_subsys = {
.name = "cpuset",
.create = cpuset_create,
- .destroy = cpuset_destroy,
+ .destroy = cpuset_destroy,
.can_attach = cpuset_can_attach,
.attach = cpuset_attach,
.populate = cpuset_populate,
}
/*
- * If common_cpu_mem_hotplug_unplug(), below, unplugs any CPUs
+ * If CPU and/or memory hotplug handlers, below, unplug any CPUs
* or memory nodes, we need to walk over the cpuset hierarchy,
* removing that CPU or node from all cpusets. If this removes the
* last CPU or node from a cpuset, then move the tasks in the empty
}
}
-/*
- * The cpus_allowed and mems_allowed nodemasks in the top_cpuset track
- * cpu_online_map and node_states[N_HIGH_MEMORY]. Force the top cpuset to
- * track what's online after any CPU or memory node hotplug or unplug event.
- *
- * Since there are two callers of this routine, one for CPU hotplug
- * events and one for memory node hotplug events, we could have coded
- * two separate routines here. We code it as a single common routine
- * in order to minimize text size.
- */
-
-static void common_cpu_mem_hotplug_unplug(int rebuild_sd)
-{
- cgroup_lock();
-
- top_cpuset.cpus_allowed = cpu_online_map;
- top_cpuset.mems_allowed = node_states[N_HIGH_MEMORY];
- scan_for_empty_cpusets(&top_cpuset);
-
- /*
- * Scheduler destroys domains on hotplug events.
- * Rebuild them based on the current settings.
- */
- if (rebuild_sd)
- rebuild_sched_domains();
-
- cgroup_unlock();
-}
-
/*
* The top_cpuset tracks what CPUs and Memory Nodes are online,
* period. This is necessary in order to make cpusets transparent
*
* This routine ensures that top_cpuset.cpus_allowed tracks
* cpu_online_map on each CPU hotplug (cpuhp) event.
+ *
+ * Called within get_online_cpus(). Needs to call cgroup_lock()
+ * before calling generate_sched_domains().
*/
-
-static int cpuset_handle_cpuhp(struct notifier_block *unused_nb,
+static int cpuset_track_online_cpus(struct notifier_block *unused_nb,
unsigned long phase, void *unused_cpu)
{
+ struct sched_domain_attr *attr;
+ cpumask_t *doms;
+ int ndoms;
+
switch (phase) {
- case CPU_UP_CANCELED:
- case CPU_UP_CANCELED_FROZEN:
- case CPU_DOWN_FAILED:
- case CPU_DOWN_FAILED_FROZEN:
case CPU_ONLINE:
case CPU_ONLINE_FROZEN:
case CPU_DEAD:
case CPU_DEAD_FROZEN:
- common_cpu_mem_hotplug_unplug(1);
break;
+
default:
return NOTIFY_DONE;
}
+ cgroup_lock();
+ top_cpuset.cpus_allowed = cpu_online_map;
+ scan_for_empty_cpusets(&top_cpuset);
+ ndoms = generate_sched_domains(&doms, &attr);
+ cgroup_unlock();
+
+ /* Have scheduler rebuild the domains */
+ partition_sched_domains(ndoms, doms, attr);
+
return NOTIFY_OK;
}
#ifdef CONFIG_MEMORY_HOTPLUG
/*
* Keep top_cpuset.mems_allowed tracking node_states[N_HIGH_MEMORY].
- * Call this routine anytime after you change
- * node_states[N_HIGH_MEMORY].
- * See also the previous routine cpuset_handle_cpuhp().
+ * Call this routine anytime after node_states[N_HIGH_MEMORY] changes.
+ * See also the previous routine cpuset_track_online_cpus().
*/
-
void cpuset_track_online_nodes(void)
{
- common_cpu_mem_hotplug_unplug(0);
+ cgroup_lock();
+ top_cpuset.mems_allowed = node_states[N_HIGH_MEMORY];
+ scan_for_empty_cpusets(&top_cpuset);
+ cgroup_unlock();
}
#endif
top_cpuset.cpus_allowed = cpu_online_map;
top_cpuset.mems_allowed = node_states[N_HIGH_MEMORY];
- hotcpu_notifier(cpuset_handle_cpuhp, 0);
+ hotcpu_notifier(cpuset_track_online_cpus, 0);
}
/**
* We won't ever get here for the group leader, since it
* will have been the last reference on the signal_struct.
*/
- sig->utime = cputime_add(sig->utime, tsk->utime);
- sig->stime = cputime_add(sig->stime, tsk->stime);
- sig->gtime = cputime_add(sig->gtime, tsk->gtime);
+ sig->utime = cputime_add(sig->utime, task_utime(tsk));
+ sig->stime = cputime_add(sig->stime, task_stime(tsk));
+ sig->gtime = cputime_add(sig->gtime, task_gtime(tsk));
sig->min_flt += tsk->min_flt;
sig->maj_flt += tsk->maj_flt;
sig->nvcsw += tsk->nvcsw;
* the child reaper process (ie "init") in our pid
* space.
*/
+static struct task_struct *find_new_reaper(struct task_struct *father)
+{
+ struct pid_namespace *pid_ns = task_active_pid_ns(father);
+ struct task_struct *thread;
+
+ thread = father;
+ while_each_thread(father, thread) {
+ if (thread->flags & PF_EXITING)
+ continue;
+ if (unlikely(pid_ns->child_reaper == father))
+ pid_ns->child_reaper = thread;
+ return thread;
+ }
+
+ if (unlikely(pid_ns->child_reaper == father)) {
+ write_unlock_irq(&tasklist_lock);
+ if (unlikely(pid_ns == &init_pid_ns))
+ panic("Attempted to kill init!");
+
+ zap_pid_ns_processes(pid_ns);
+ write_lock_irq(&tasklist_lock);
+ /*
+ * We can not clear ->child_reaper or leave it alone.
+ * There may by stealth EXIT_DEAD tasks on ->children,
+ * forget_original_parent() must move them somewhere.
+ */
+ pid_ns->child_reaper = init_pid_ns.child_reaper;
+ }
+
+ return pid_ns->child_reaper;
+}
+
static void forget_original_parent(struct task_struct *father)
{
- struct task_struct *p, *n, *reaper = father;
+ struct task_struct *p, *n, *reaper;
LIST_HEAD(ptrace_dead);
write_lock_irq(&tasklist_lock);
-
+ reaper = find_new_reaper(father);
/*
* First clean up ptrace if we were using it.
*/
ptrace_exit(father, &ptrace_dead);
- do {
- reaper = next_thread(reaper);
- if (reaper == father) {
- reaper = task_child_reaper(father);
- break;
- }
- } while (reaper->flags & PF_EXITING);
-
list_for_each_entry_safe(p, n, &father->children, sibling) {
p->real_parent = reaper;
if (p->parent == father) {
static inline void check_stack_usage(void) {}
#endif
-static inline void exit_child_reaper(struct task_struct *tsk)
-{
- if (likely(tsk->group_leader != task_child_reaper(tsk)))
- return;
-
- if (tsk->nsproxy->pid_ns == &init_pid_ns)
- panic("Attempted to kill init!");
-
- /*
- * @tsk is the last thread in the 'cgroup-init' and is exiting.
- * Terminate all remaining processes in the namespace and reap them
- * before exiting @tsk.
- *
- * Note that @tsk (last thread of cgroup-init) may not necessarily
- * be the child-reaper (i.e main thread of cgroup-init) of the
- * namespace i.e the child_reaper may have already exited.
- *
- * Even after a child_reaper exits, we let it inherit orphaned children,
- * because, pid_ns->child_reaper remains valid as long as there is
- * at least one living sub-thread in the cgroup init.
-
- * This living sub-thread of the cgroup-init will be notified when
- * a child inherited by the 'child-reaper' exits (do_notify_parent()
- * uses __group_send_sig_info()). Further, when reaping child processes,
- * do_wait() iterates over children of all living sub threads.
-
- * i.e even though 'child_reaper' thread is listed as the parent of the
- * orphaned children, any living sub-thread in the cgroup-init can
- * perform the role of the child_reaper.
- */
- zap_pid_ns_processes(tsk->nsproxy->pid_ns);
-}
-
NORET_TYPE void do_exit(long code)
{
struct task_struct *tsk = current;
}
group_dead = atomic_dec_and_test(&tsk->signal->live);
if (group_dead) {
- exit_child_reaper(tsk);
hrtimer_cancel(&tsk->signal->real_timer);
exit_itimers(tsk->signal);
}
rc = sys_wait4(-1, NULL, __WALL, NULL);
} while (rc != -ECHILD);
-
- /* Child reaper for the pid namespace is going away */
- pid_ns->child_reaper = NULL;
acct_exit_ns(pid_ns);
return;
}
#include <linux/uaccess.h>
/*
- * locking rule: all changes to target_value or requirements or notifiers lists
+ * locking rule: all changes to requirements or notifiers lists
* or pm_qos_object list and pm_qos_objects need to happen with pm_qos_lock
* held, taken with _irqsave. One lock to rule them all
*/
struct miscdevice pm_qos_power_miscdev;
char *name;
s32 default_value;
- s32 target_value;
+ atomic_t target_value;
s32 (*comparitor)(s32, s32);
};
.notifiers = &cpu_dma_lat_notifier,
.name = "cpu_dma_latency",
.default_value = 2000 * USEC_PER_SEC,
- .target_value = 2000 * USEC_PER_SEC,
+ .target_value = ATOMIC_INIT(2000 * USEC_PER_SEC),
.comparitor = min_compare
};
.notifiers = &network_lat_notifier,
.name = "network_latency",
.default_value = 2000 * USEC_PER_SEC,
- .target_value = 2000 * USEC_PER_SEC,
+ .target_value = ATOMIC_INIT(2000 * USEC_PER_SEC),
.comparitor = min_compare
};
.notifiers = &network_throughput_notifier,
.name = "network_throughput",
.default_value = 0,
- .target_value = 0,
+ .target_value = ATOMIC_INIT(0),
.comparitor = max_compare
};
extreme_value = pm_qos_array[target]->comparitor(
extreme_value, node->value);
}
- if (pm_qos_array[target]->target_value != extreme_value) {
+ if (atomic_read(&pm_qos_array[target]->target_value) != extreme_value) {
call_notifier = 1;
- pm_qos_array[target]->target_value = extreme_value;
+ atomic_set(&pm_qos_array[target]->target_value, extreme_value);
pr_debug(KERN_ERR "new target for qos %d is %d\n", target,
- pm_qos_array[target]->target_value);
+ atomic_read(&pm_qos_array[target]->target_value));
}
spin_unlock_irqrestore(&pm_qos_lock, flags);
*/
int pm_qos_requirement(int pm_qos_class)
{
- int ret_val;
- unsigned long flags;
-
- spin_lock_irqsave(&pm_qos_lock, flags);
- ret_val = pm_qos_array[pm_qos_class]->target_value;
- spin_unlock_irqrestore(&pm_qos_lock, flags);
-
- return ret_val;
+ return atomic_read(&pm_qos_array[pm_qos_class]->target_value);
}
EXPORT_SYMBOL_GPL(pm_qos_requirement);
EXPORT_SYMBOL(allocate_resource);
-/**
- * insert_resource - Inserts a resource in the resource tree
- * @parent: parent of the new resource
- * @new: new resource to insert
- *
- * Returns 0 on success, -EBUSY if the resource can't be inserted.
- *
- * This function is equivalent to request_resource when no conflict
- * happens. If a conflict happens, and the conflicting resources
- * entirely fit within the range of the new resource, then the new
- * resource is inserted and the conflicting resources become children of
- * the new resource.
+/*
+ * Insert a resource into the resource tree. If successful, return NULL,
+ * otherwise return the conflicting resource (compare to __request_resource())
*/
-int insert_resource(struct resource *parent, struct resource *new)
+static struct resource * __insert_resource(struct resource *parent, struct resource *new)
{
- int result;
struct resource *first, *next;
- write_lock(&resource_lock);
-
for (;; parent = first) {
- result = 0;
first = __request_resource(parent, new);
if (!first)
- goto out;
+ return first;
- result = -EBUSY;
if (first == parent)
- goto out;
+ return first;
if ((first->start > new->start) || (first->end < new->end))
break;
for (next = first; ; next = next->sibling) {
/* Partial overlap? Bad, and unfixable */
if (next->start < new->start || next->end > new->end)
- goto out;
+ return next;
if (!next->sibling)
break;
if (next->sibling->start > new->end)
break;
}
- result = 0;
-
new->parent = parent;
new->sibling = next->sibling;
new->child = first;
next = next->sibling;
next->sibling = new;
}
+ return NULL;
+}
- out:
+/**
+ * insert_resource - Inserts a resource in the resource tree
+ * @parent: parent of the new resource
+ * @new: new resource to insert
+ *
+ * Returns 0 on success, -EBUSY if the resource can't be inserted.
+ *
+ * This function is equivalent to request_resource when no conflict
+ * happens. If a conflict happens, and the conflicting resources
+ * entirely fit within the range of the new resource, then the new
+ * resource is inserted and the conflicting resources become children of
+ * the new resource.
+ */
+int insert_resource(struct resource *parent, struct resource *new)
+{
+ struct resource *conflict;
+
+ write_lock(&resource_lock);
+ conflict = __insert_resource(parent, new);
+ write_unlock(&resource_lock);
+ return conflict ? -EBUSY : 0;
+}
+
+/**
+ * insert_resource_expand_to_fit - Insert a resource into the resource tree
+ * @root: root resource descriptor
+ * @new: new resource to insert
+ *
+ * Insert a resource into the resource tree, possibly expanding it in order
+ * to make it encompass any conflicting resources.
+ */
+void insert_resource_expand_to_fit(struct resource *root, struct resource *new)
+{
+ if (new->parent)
+ return;
+
+ write_lock(&resource_lock);
+ for (;;) {
+ struct resource *conflict;
+
+ conflict = __insert_resource(root, new);
+ if (!conflict)
+ break;
+ if (conflict == root)
+ break;
+
+ /* Ok, expand resource to cover the conflict, then try again .. */
+ if (conflict->start < new->start)
+ new->start = conflict->start;
+ if (conflict->end > new->end)
+ new->end = conflict->end;
+
+ printk("Expanded resource %s due to conflict with %s\n", new->name, conflict->name);
+ }
write_unlock(&resource_lock);
- return result;
}
/**
cpustat->steal = cputime64_add(cpustat->steal, tmp);
}
+/*
+ * Use precise platform statistics if available:
+ */
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+cputime_t task_utime(struct task_struct *p)
+{
+ return p->utime;
+}
+
+cputime_t task_stime(struct task_struct *p)
+{
+ return p->stime;
+}
+#else
+cputime_t task_utime(struct task_struct *p)
+{
+ clock_t utime = cputime_to_clock_t(p->utime),
+ total = utime + cputime_to_clock_t(p->stime);
+ u64 temp;
+
+ /*
+ * Use CFS's precise accounting:
+ */
+ temp = (u64)nsec_to_clock_t(p->se.sum_exec_runtime);
+
+ if (total) {
+ temp *= utime;
+ do_div(temp, total);
+ }
+ utime = (clock_t)temp;
+
+ p->prev_utime = max(p->prev_utime, clock_t_to_cputime(utime));
+ return p->prev_utime;
+}
+
+cputime_t task_stime(struct task_struct *p)
+{
+ clock_t stime;
+
+ /*
+ * Use CFS's precise accounting. (we subtract utime from
+ * the total, to make sure the total observed by userspace
+ * grows monotonically - apps rely on that):
+ */
+ stime = nsec_to_clock_t(p->se.sum_exec_runtime) -
+ cputime_to_clock_t(task_utime(p));
+
+ if (stime >= 0)
+ p->prev_stime = max(p->prev_stime, clock_t_to_cputime(stime));
+
+ return p->prev_stime;
+}
+#endif
+
+inline cputime_t task_gtime(struct task_struct *p)
+{
+ return p->gtime;
+}
+
/*
* This function gets called by the timer code, with HZ frequency.
* We call it with interrupts disabled.
* and partition_sched_domains() will fallback to the single partition
* 'fallback_doms', it also forces the domains to be rebuilt.
*
+ * If doms_new==NULL it will be replaced with cpu_online_map.
+ * ndoms_new==0 is a special case for destroying existing domains.
+ * It will not create the default domain.
+ *
* Call with hotplug lock held
*/
void partition_sched_domains(int ndoms_new, cpumask_t *doms_new,
struct sched_domain_attr *dattr_new)
{
- int i, j;
+ int i, j, n;
mutex_lock(&sched_domains_mutex);
/* always unregister in case we don't destroy any domains */
unregister_sched_domain_sysctl();
- if (doms_new == NULL)
- ndoms_new = 0;
+ n = doms_new ? ndoms_new : 0;
/* Destroy deleted domains */
for (i = 0; i < ndoms_cur; i++) {
- for (j = 0; j < ndoms_new; j++) {
+ for (j = 0; j < n; j++) {
if (cpus_equal(doms_cur[i], doms_new[j])
&& dattrs_equal(dattr_cur, i, dattr_new, j))
goto match1;
if (doms_new == NULL) {
ndoms_cur = 0;
- ndoms_new = 1;
doms_new = &fallback_doms;
cpus_andnot(doms_new[0], cpu_online_map, cpu_isolated_map);
dattr_new = NULL;
int arch_reinit_sched_domains(void)
{
get_online_cpus();
+
+ /* Destroy domains first to force the rebuild */
+ partition_sched_domains(0, NULL, NULL);
+
rebuild_sched_domains();
put_online_cpus();
+
return 0;
}
case CPU_ONLINE_FROZEN:
case CPU_DEAD:
case CPU_DEAD_FROZEN:
- partition_sched_domains(0, NULL, NULL);
+ partition_sched_domains(1, NULL, NULL);
return NOTIFY_OK;
default:
do_each_thread(g, t) {
if (!--max_count)
goto unlock;
- if (t->state & TASK_UNINTERRUPTIBLE)
+ /* use "==" to skip the TASK_KILLABLE tasks waiting on NFS */
+ if (t->state == TASK_UNINTERRUPTIBLE)
check_hung_task(t, now);
} while_each_thread(g, t);
unlock:
static struct ctl_table root_table[];
static struct ctl_table_root sysctl_table_root;
static struct ctl_table_header root_table_header = {
+ .count = 1,
.ctl_table = root_table,
.ctl_entry = LIST_HEAD_INIT(sysctl_table_root.default_set.list),
.root = &sysctl_table_root,
/*
* Noop handler when we shut down an event device
*/
-static void clockevents_handle_noop(struct clock_event_device *dev)
+void clockevents_handle_noop(struct clock_event_device *dev)
{
}
* released list and do a notify add later.
*/
if (old) {
- old->event_handler = clockevents_handle_noop;
clockevents_set_mode(old, CLOCK_EVT_MODE_UNUSED);
list_del(&old->list);
list_add(&old->list, &clockevents_released);
if (abs(now.tv_nsec - (NSEC_PER_SEC / 2)) <= tick_nsec / 2)
fail = update_persistent_clock(now);
- next.tv_nsec = (NSEC_PER_SEC / 2) - now.tv_nsec;
+ next.tv_nsec = (NSEC_PER_SEC / 2) - now.tv_nsec - (TICK_NSEC / 2);
if (next.tv_nsec <= 0)
next.tv_nsec += NSEC_PER_SEC;
*/
static void tick_handle_periodic_broadcast(struct clock_event_device *dev)
{
+ ktime_t next;
+
tick_do_periodic_broadcast();
/*
/*
* Setup the next period for devices, which do not have
- * periodic mode:
+ * periodic mode. We read dev->next_event first and add to it
+ * when the event alrady expired. clockevents_program_event()
+ * sets dev->next_event only when the event is really
+ * programmed to the device.
*/
- for (;;) {
- ktime_t next = ktime_add(dev->next_event, tick_period);
+ for (next = dev->next_event; ;) {
+ next = ktime_add(next, tick_period);
if (!clockevents_program_event(dev, next, ktime_get()))
return;
struct clock_event_device *bc, *dev;
struct tick_device *td;
unsigned long flags, *reason = why;
- int cpu;
+ int cpu, bc_stopped;
spin_lock_irqsave(&tick_broadcast_lock, flags);
if (!tick_device_is_functional(dev))
goto out;
+ bc_stopped = cpus_empty(tick_broadcast_mask);
+
switch (*reason) {
case CLOCK_EVT_NOTIFY_BROADCAST_ON:
case CLOCK_EVT_NOTIFY_BROADCAST_FORCE:
break;
}
- if (cpus_empty(tick_broadcast_mask))
- clockevents_set_mode(bc, CLOCK_EVT_MODE_SHUTDOWN);
- else {
+ if (cpus_empty(tick_broadcast_mask)) {
+ if (!bc_stopped)
+ clockevents_set_mode(bc, CLOCK_EVT_MODE_SHUTDOWN);
+ } else if (bc_stopped) {
if (tick_broadcast_device.mode == TICKDEV_MODE_PERIODIC)
tick_broadcast_start_periodic(bc);
else
static int tick_broadcast_set_event(ktime_t expires, int force)
{
struct clock_event_device *bc = tick_broadcast_device.evtdev;
- ktime_t now = ktime_get();
- int res;
-
- for(;;) {
- res = clockevents_program_event(bc, expires, now);
- if (!res || !force)
- return res;
- now = ktime_get();
- expires = ktime_add(now, ktime_set(0, bc->min_delta_ns));
- }
+
+ return tick_dev_program_event(bc, expires, force);
}
int tick_resume_broadcast_oneshot(struct clock_event_device *bc)
cpu_clear(cpu, tick_broadcast_oneshot_mask);
}
+static void tick_broadcast_init_next_event(cpumask_t *mask, ktime_t expires)
+{
+ struct tick_device *td;
+ int cpu;
+
+ for_each_cpu_mask_nr(cpu, *mask) {
+ td = &per_cpu(tick_cpu_device, cpu);
+ if (td->evtdev)
+ td->evtdev->next_event = expires;
+ }
+}
+
/**
* tick_broadcast_setup_oneshot - setup the broadcast device
*/
void tick_broadcast_setup_oneshot(struct clock_event_device *bc)
{
- bc->event_handler = tick_handle_oneshot_broadcast;
- clockevents_set_mode(bc, CLOCK_EVT_MODE_ONESHOT);
- bc->next_event.tv64 = KTIME_MAX;
+ /* Set it up only once ! */
+ if (bc->event_handler != tick_handle_oneshot_broadcast) {
+ int was_periodic = bc->mode == CLOCK_EVT_MODE_PERIODIC;
+ int cpu = smp_processor_id();
+ cpumask_t mask;
+
+ bc->event_handler = tick_handle_oneshot_broadcast;
+ clockevents_set_mode(bc, CLOCK_EVT_MODE_ONESHOT);
+
+ /* Take the do_timer update */
+ tick_do_timer_cpu = cpu;
+
+ /*
+ * We must be careful here. There might be other CPUs
+ * waiting for periodic broadcast. We need to set the
+ * oneshot_mask bits for those and program the
+ * broadcast device to fire.
+ */
+ mask = tick_broadcast_mask;
+ cpu_clear(cpu, mask);
+ cpus_or(tick_broadcast_oneshot_mask,
+ tick_broadcast_oneshot_mask, mask);
+
+ if (was_periodic && !cpus_empty(mask)) {
+ tick_broadcast_init_next_event(&mask, tick_next_period);
+ tick_broadcast_set_event(tick_next_period, 1);
+ } else
+ bc->next_event.tv64 = KTIME_MAX;
+ }
}
/*
} else {
handler = td->evtdev->event_handler;
next_event = td->evtdev->next_event;
+ td->evtdev->event_handler = clockevents_handle_noop;
}
td->evtdev = newdev;
extern void tick_setup_oneshot(struct clock_event_device *newdev,
void (*handler)(struct clock_event_device *),
ktime_t nextevt);
+extern int tick_dev_program_event(struct clock_event_device *dev,
+ ktime_t expires, int force);
extern int tick_program_event(ktime_t expires, int force);
extern void tick_oneshot_notify(void);
extern int tick_switch_to_oneshot(void (*handler)(struct clock_event_device *));
#include "tick-internal.h"
/**
- * tick_program_event
+ * tick_program_event internal worker function
*/
-int tick_program_event(ktime_t expires, int force)
+int tick_dev_program_event(struct clock_event_device *dev, ktime_t expires,
+ int force)
{
- struct clock_event_device *dev = __get_cpu_var(tick_cpu_device).evtdev;
ktime_t now = ktime_get();
+ int i;
- while (1) {
+ for (i = 0;;) {
int ret = clockevents_program_event(dev, expires, now);
if (!ret || !force)
return ret;
+
+ /*
+ * We tried 2 times to program the device with the given
+ * min_delta_ns. If that's not working then we double it
+ * and emit a warning.
+ */
+ if (++i > 2) {
+ /* Increase the min. delta and try again */
+ if (!dev->min_delta_ns)
+ dev->min_delta_ns = 5000;
+ else
+ dev->min_delta_ns += dev->min_delta_ns >> 1;
+
+ printk(KERN_WARNING
+ "CE: %s increasing min_delta_ns to %lu nsec\n",
+ dev->name ? dev->name : "?",
+ dev->min_delta_ns << 1);
+
+ i = 0;
+ }
+
now = ktime_get();
- expires = ktime_add(now, ktime_set(0, dev->min_delta_ns));
+ expires = ktime_add_ns(now, dev->min_delta_ns);
}
}
+/**
+ * tick_program_event
+ */
+int tick_program_event(ktime_t expires, int force)
+{
+ struct clock_event_device *dev = __get_cpu_var(tick_cpu_device).evtdev;
+
+ return tick_dev_program_event(dev, expires, force);
+}
+
/**
* tick_resume_onshot - resume oneshot mode
*/
{
newdev->event_handler = handler;
clockevents_set_mode(newdev, CLOCK_EVT_MODE_ONESHOT);
- clockevents_program_event(newdev, next_event, ktime_get());
+ tick_dev_program_event(newdev, next_event, 1);
}
/**
ts->idle_lastupdate = now;
ts->idle_sleeptime = ktime_add(ts->idle_sleeptime, delta);
ts->idle_active = 0;
+
+ sched_clock_idle_wakeup_event(0);
}
}
}
ts->idle_entrytime = now;
ts->idle_active = 1;
+ sched_clock_idle_sleep_event();
return now;
}
bool
depends on DEBUG_KERNEL && TRACE_IRQFLAGS_SUPPORT && STACKTRACE_SUPPORT && LOCKDEP_SUPPORT
select STACKTRACE
- select FRAME_POINTER if !X86 && !MIPS
+ select FRAME_POINTER if !X86 && !MIPS && !PPC
select KALLSYMS
select KALLSYMS_ALL
depends on FAULT_INJECTION_DEBUG_FS && STACKTRACE_SUPPORT
depends on !X86_64
select STACKTRACE
- select FRAME_POINTER
+ select FRAME_POINTER if !PPC
help
Provide stacktrace filter for fault-injection capabilities
config LATENCYTOP
bool "Latency measuring infrastructure"
- select FRAME_POINTER if !MIPS
+ select FRAME_POINTER if !MIPS && !PPC
select KALLSYMS
select KALLSYMS_ALL
select STACKTRACE
/*
* Allocate a new object. If the pool is empty, switch off the debugger.
+ * Must be called with interrupts disabled.
*/
static struct debug_obj *
alloc_object(void *addr, struct debug_bucket *b, struct debug_obj_descr *descr)
static void free_object(struct debug_obj *obj)
{
unsigned long idx = (unsigned long)(obj - obj_static_pool);
+ unsigned long flags;
if (obj_pool_free < ODEBUG_POOL_SIZE || idx < ODEBUG_POOL_SIZE) {
- spin_lock(&pool_lock);
+ spin_lock_irqsave(&pool_lock, flags);
hlist_add_head(&obj->node, &obj_pool);
obj_pool_free++;
obj_pool_used--;
- spin_unlock(&pool_lock);
+ spin_unlock_irqrestore(&pool_lock, flags);
} else {
- spin_lock(&pool_lock);
+ spin_lock_irqsave(&pool_lock, flags);
obj_pool_used--;
- spin_unlock(&pool_lock);
+ spin_unlock_irqrestore(&pool_lock, flags);
kmem_cache_free(obj_cache, obj);
}
}
{
struct debug_bucket *db = obj_hash;
struct hlist_node *node, *tmp;
+ HLIST_HEAD(freelist);
struct debug_obj *obj;
unsigned long flags;
int i;
for (i = 0; i < ODEBUG_HASH_SIZE; i++, db++) {
spin_lock_irqsave(&db->lock, flags);
- hlist_for_each_entry_safe(obj, node, tmp, &db->list, node) {
+ hlist_move_list(&db->list, &freelist);
+ spin_unlock_irqrestore(&db->lock, flags);
+
+ /* Now free them */
+ hlist_for_each_entry_safe(obj, node, tmp, &freelist, node) {
hlist_del(&obj->node);
free_object(obj);
}
- spin_unlock_irqrestore(&db->lock, flags);
}
}
return;
default:
hlist_del(&obj->node);
+ spin_unlock_irqrestore(&db->lock, flags);
free_object(obj);
- break;
+ return;
}
out_unlock:
spin_unlock_irqrestore(&db->lock, flags);
{
unsigned long flags, oaddr, saddr, eaddr, paddr, chunks;
struct hlist_node *node, *tmp;
+ HLIST_HEAD(freelist);
struct debug_obj_descr *descr;
enum debug_obj_state state;
struct debug_bucket *db;
goto repeat;
default:
hlist_del(&obj->node);
- free_object(obj);
+ hlist_add_head(&obj->node, &freelist);
break;
}
}
spin_unlock_irqrestore(&db->lock, flags);
+
+ /* Now free them */
+ hlist_for_each_entry_safe(obj, node, tmp, &freelist, node) {
+ hlist_del(&obj->node);
+ free_object(obj);
+ }
+
if (cnt > debug_objects_maxchain)
debug_objects_maxchain = cnt;
}
* the lowest available address range.
*/
dma_addr_t handle;
- handle = swiotlb_map_single(NULL, NULL, size, DMA_FROM_DEVICE);
+ handle = swiotlb_map_single(hwdev, NULL, size, DMA_FROM_DEVICE);
if (swiotlb_dma_mapping_error(hwdev, handle))
return NULL;
#include <asm/page.h> /* for PAGE_SIZE */
#include <asm/div64.h>
+#include <asm/sections.h> /* for dereference_function_descriptor() */
/* Works only for digits and letters, but small and fast */
#define TOLOWER(x) ((x) | 0x20)
return buf;
}
-static inline void *dereference_function_descriptor(void *ptr)
-{
-#if defined(CONFIG_IA64) || defined(CONFIG_PPC64)
- void *p;
- if (!probe_kernel_address(ptr, p))
- ptr = p;
-#endif
- return ptr;
-}
-
static char *symbol_string(char *buf, char *end, void *ptr, int field_width, int precision, int flags)
{
unsigned long value = (unsigned long) ptr;
* After a write we want buffered reads to be sure to go to disk to get
* the new data. We invalidate clean cached page from the region we're
* about to write. We do this *before* the write so that we can return
- * -EIO without clobbering -EIOCBQUEUED from ->direct_IO().
+ * without clobbering -EIOCBQUEUED from ->direct_IO().
*/
if (mapping->nrpages) {
written = invalidate_inode_pages2_range(mapping,
pos >> PAGE_CACHE_SHIFT, end);
- if (written)
+ /*
+ * If a page can not be invalidated, return 0 to fall back
+ * to buffered write.
+ */
+ if (written) {
+ if (written == -EBUSY)
+ return 0;
goto out;
+ }
}
written = mapping->a_ops->direct_IO(WRITE, iocb, iov, pos, *nr_segs);
} else {
switch (flags & MAP_TYPE) {
case MAP_SHARED:
+ /*
+ * Ignore pgoff.
+ */
+ pgoff = 0;
vm_flags |= VM_SHARED | VM_MAYSHARE;
break;
case MAP_PRIVATE:
#endif
for (page = start_page; page <= end_page;) {
+ /* Make sure we are not inadvertently changing nodes */
+ VM_BUG_ON(page_to_nid(page) != zone_to_nid(zone));
+
if (!pfn_valid_within(page_to_pfn(page))) {
page++;
continue;
continue;
page = pfn_to_page(pfn);
+ /* Watch out for overlapping nodes */
+ if (page_to_nid(page) != zone_to_nid(zone))
+ continue;
+
/* Blocks with reserved pages will never free, skip them. */
if (PageReserved(page))
continue;
}
#ifndef CONFIG_NEED_MULTIPLE_NODES
-struct pglist_data contig_page_data = { .bdata = &bootmem_node_data[0] };
+struct pglist_data __refdata contig_page_data = { .bdata = &bootmem_node_data[0] };
EXPORT_SYMBOL(contig_page_data);
#endif
* linux/mm/page_isolation.c
*/
-#include <stddef.h>
#include <linux/mm.h>
#include <linux/page-isolation.h>
#include <linux/pageblock-flags.h>
static unsigned long max_pages(unsigned long min_pages)
{
unsigned long node_free_pages, max;
- struct zone *zones = NODE_DATA(numa_node_id())->node_zones;
+ int node = numa_node_id();
+ struct zone *zones = NODE_DATA(node)->node_zones;
+ int num_cpus_on_node;
+ node_to_cpumask_ptr(cpumask_on_node, node);
node_free_pages =
#ifdef CONFIG_ZONE_DMA
zone_page_state(&zones[ZONE_NORMAL], NR_FREE_PAGES);
max = node_free_pages / FRACTION_OF_NODE_MEM;
+
+ num_cpus_on_node = cpus_weight_nr(*cpumask_on_node);
+ max /= num_cpus_on_node;
+
return max(max, min_pages);
}
* Any pages which are found to be mapped into pagetables are unmapped prior to
* invalidation.
*
- * Returns -EIO if any pages could not be invalidated.
+ * Returns -EBUSY if any pages could not be invalidated.
*/
int invalidate_inode_pages2_range(struct address_space *mapping,
pgoff_t start, pgoff_t end)
ret2 = do_launder_page(mapping, page);
if (ret2 == 0) {
if (!invalidate_complete_page2(mapping, page))
- ret2 = -EIO;
+ ret2 = -EBUSY;
}
if (ret2 < 0)
ret = ret2;
#define BT_DBG(D...)
#endif
-#define VERSION "2.12"
+#define VERSION "2.13"
/* Bluetooth sockets */
#define BT_MAX_PROTO 8
/* Create SCO or ACL connection.
* Device _must_ be locked */
-struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst)
+struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst, __u8 auth_type)
{
struct hci_conn *acl;
struct hci_conn *sco;
hci_conn_hold(acl);
- if (acl->state == BT_OPEN || acl->state == BT_CLOSED)
+ if (acl->state == BT_OPEN || acl->state == BT_CLOSED) {
+ acl->auth_type = auth_type;
hci_acl_connect(acl);
+ }
if (type == ACL_LINK)
return acl;
}
EXPORT_SYMBOL(hci_connect);
+/* Check link security requirement */
+int hci_conn_check_link_mode(struct hci_conn *conn)
+{
+ BT_DBG("conn %p", conn);
+
+ if (conn->ssp_mode > 0 && conn->hdev->ssp_mode > 0 &&
+ !(conn->link_mode & HCI_LM_ENCRYPT))
+ return 0;
+
+ return 1;
+}
+EXPORT_SYMBOL(hci_conn_check_link_mode);
+
/* Authenticate remote device */
int hci_conn_auth(struct hci_conn *conn)
{
if (conn->ssp_mode > 0 && conn->hdev->ssp_mode > 0) {
if (!(conn->auth_type & 0x01)) {
- conn->auth_type = HCI_AT_GENERAL_BONDING_MITM;
+ conn->auth_type |= 0x01;
conn->link_mode &= ~HCI_LM_AUTH;
}
}
if (conn->state == BT_CONFIG) {
if (!ev->status && hdev->ssp_mode > 0 &&
- conn->ssp_mode > 0) {
- if (conn->out) {
- struct hci_cp_auth_requested cp;
- cp.handle = ev->handle;
- hci_send_cmd(hdev,
- HCI_OP_AUTH_REQUESTED,
+ conn->ssp_mode > 0 && conn->out) {
+ struct hci_cp_auth_requested cp;
+ cp.handle = ev->handle;
+ hci_send_cmd(hdev, HCI_OP_AUTH_REQUESTED,
sizeof(cp), &cp);
- }
} else {
conn->state = BT_CONNECTED;
hci_proto_connect_cfm(conn, ev->status);
#define BT_DBG(D...)
#endif
-#define VERSION "2.10"
+#define VERSION "2.11"
static u32 l2cap_feat_mask = 0x0000;
struct l2cap_conn *conn;
struct hci_conn *hcon;
struct hci_dev *hdev;
+ __u8 auth_type;
int err = 0;
BT_DBG("%s -> %s psm 0x%2.2x", batostr(src), batostr(dst), l2cap_pi(sk)->psm);
err = -ENOMEM;
- hcon = hci_connect(hdev, ACL_LINK, dst);
+ if (l2cap_pi(sk)->link_mode & L2CAP_LM_AUTH ||
+ l2cap_pi(sk)->link_mode & L2CAP_LM_ENCRYPT ||
+ l2cap_pi(sk)->link_mode & L2CAP_LM_SECURE) {
+ if (l2cap_pi(sk)->psm == cpu_to_le16(0x0001))
+ auth_type = HCI_AT_NO_BONDING_MITM;
+ else
+ auth_type = HCI_AT_GENERAL_BONDING_MITM;
+ } else {
+ if (l2cap_pi(sk)->psm == cpu_to_le16(0x0001))
+ auth_type = HCI_AT_NO_BONDING;
+ else
+ auth_type = HCI_AT_GENERAL_BONDING;
+ }
+
+ hcon = hci_connect(hdev, ACL_LINK, dst, auth_type);
if (!hcon)
goto done;
struct l2cap_conn_req *req = (struct l2cap_conn_req *) data;
struct l2cap_conn_rsp rsp;
struct sock *sk, *parent;
- int result, status = 0;
+ int result, status = L2CAP_CS_NO_INFO;
u16 dcid = 0, scid = __le16_to_cpu(req->scid);
- __le16 psm = req->psm;
+ __le16 psm = req->psm;
BT_DBG("psm 0x%2.2x scid 0x%4.4x", psm, scid);
goto sendresp;
}
+ /* Check if the ACL is secure enough (if not SDP) */
+ if (psm != cpu_to_le16(0x0001) &&
+ !hci_conn_check_link_mode(conn->hcon)) {
+ result = L2CAP_CR_SEC_BLOCK;
+ goto response;
+ }
+
result = L2CAP_CR_NO_MEM;
/* Check for backlog size */
rsp.scid = cpu_to_le16(l2cap_pi(sk)->dcid);
rsp.dcid = cpu_to_le16(l2cap_pi(sk)->scid);
rsp.result = cpu_to_le16(result);
- rsp.status = cpu_to_le16(0);
+ rsp.status = cpu_to_le16(L2CAP_CS_NO_INFO);
l2cap_send_cmd(conn, l2cap_pi(sk)->ident,
L2CAP_CONN_RSP, sizeof(rsp), &rsp);
}
rsp.scid = cpu_to_le16(l2cap_pi(sk)->dcid);
rsp.dcid = cpu_to_le16(l2cap_pi(sk)->scid);
rsp.result = cpu_to_le16(result);
- rsp.status = cpu_to_le16(0);
+ rsp.status = cpu_to_le16(L2CAP_CS_NO_INFO);
l2cap_send_cmd(conn, l2cap_pi(sk)->ident,
L2CAP_CONN_RSP, sizeof(rsp), &rsp);
}
else
type = SCO_LINK;
- hcon = hci_connect(hdev, type, dst);
+ hcon = hci_connect(hdev, type, dst, HCI_AT_NO_BONDING);
if (!hcon)
goto done;
return 0;
case BRCTL_SET_BRIDGE_HELLO_TIME:
+ {
+ unsigned long t = clock_t_to_jiffies(args[1]);
if (!capable(CAP_NET_ADMIN))
return -EPERM;
+ if (t < HZ)
+ return -EINVAL;
+
spin_lock_bh(&br->lock);
- br->bridge_hello_time = clock_t_to_jiffies(args[1]);
+ br->bridge_hello_time = t;
if (br_is_root_bridge(br))
br->hello_time = br->bridge_hello_time;
spin_unlock_bh(&br->lock);
return 0;
+ }
case BRCTL_SET_BRIDGE_MAX_AGE:
if (!capable(CAP_NET_ADMIN))
*/
static ssize_t store_bridge_parm(struct device *d,
const char *buf, size_t len,
- void (*set)(struct net_bridge *, unsigned long))
+ int (*set)(struct net_bridge *, unsigned long))
{
struct net_bridge *br = to_bridge(d);
char *endp;
unsigned long val;
+ int err;
if (!capable(CAP_NET_ADMIN))
return -EPERM;
return -EINVAL;
spin_lock_bh(&br->lock);
- (*set)(br, val);
+ err = (*set)(br, val);
spin_unlock_bh(&br->lock);
- return len;
+ return err ? err : len;
}
return sprintf(buf, "%lu\n", jiffies_to_clock_t(br->forward_delay));
}
-static void set_forward_delay(struct net_bridge *br, unsigned long val)
+static int set_forward_delay(struct net_bridge *br, unsigned long val)
{
unsigned long delay = clock_t_to_jiffies(val);
br->forward_delay = delay;
if (br_is_root_bridge(br))
br->bridge_forward_delay = delay;
+ return 0;
}
static ssize_t store_forward_delay(struct device *d,
jiffies_to_clock_t(to_bridge(d)->hello_time));
}
-static void set_hello_time(struct net_bridge *br, unsigned long val)
+static int set_hello_time(struct net_bridge *br, unsigned long val)
{
unsigned long t = clock_t_to_jiffies(val);
+
+ if (t < HZ)
+ return -EINVAL;
+
br->hello_time = t;
if (br_is_root_bridge(br))
br->bridge_hello_time = t;
+ return 0;
}
static ssize_t store_hello_time(struct device *d,
jiffies_to_clock_t(to_bridge(d)->max_age));
}
-static void set_max_age(struct net_bridge *br, unsigned long val)
+static int set_max_age(struct net_bridge *br, unsigned long val)
{
unsigned long t = clock_t_to_jiffies(val);
br->max_age = t;
if (br_is_root_bridge(br))
br->bridge_max_age = t;
+ return 0;
}
static ssize_t store_max_age(struct device *d, struct device_attribute *attr,
return sprintf(buf, "%lu\n", jiffies_to_clock_t(br->ageing_time));
}
-static void set_ageing_time(struct net_bridge *br, unsigned long val)
+static int set_ageing_time(struct net_bridge *br, unsigned long val)
{
br->ageing_time = clock_t_to_jiffies(val);
+ return 0;
}
static ssize_t store_ageing_time(struct device *d,
(br->bridge_id.prio[0] << 8) | br->bridge_id.prio[1]);
}
-static void set_priority(struct net_bridge *br, unsigned long val)
+static int set_priority(struct net_bridge *br, unsigned long val)
{
br_stp_set_bridge_priority(br, (u16) val);
+ return 0;
}
static ssize_t store_priority(struct device *d, struct device_attribute *attr,
spin_unlock(root_lock);
} else {
if (!test_bit(__QDISC_STATE_DEACTIVATED,
- &q->state))
+ &q->state)) {
__netif_reschedule(q);
+ } else {
+ smp_mb__before_clear_bit();
+ clear_bit(__QDISC_STATE_SCHED,
+ &q->state);
+ }
}
}
}
}
}
+static inline bool inetdev_valid_mtu(unsigned mtu)
+{
+ return mtu >= 68;
+}
+
/* Called only under RTNL semaphore */
static int inetdev_event(struct notifier_block *this, unsigned long event,
IN_DEV_CONF_SET(in_dev, NOXFRM, 1);
IN_DEV_CONF_SET(in_dev, NOPOLICY, 1);
}
+ } else if (event == NETDEV_CHANGEMTU) {
+ /* Re-enabling IP */
+ if (inetdev_valid_mtu(dev->mtu))
+ in_dev = inetdev_init(dev);
}
goto out;
}
dev->ip_ptr = NULL;
break;
case NETDEV_UP:
- if (dev->mtu < 68)
+ if (!inetdev_valid_mtu(dev->mtu))
break;
if (dev->flags & IFF_LOOPBACK) {
struct in_ifaddr *ifa;
ip_mc_down(in_dev);
break;
case NETDEV_CHANGEMTU:
- if (dev->mtu >= 68)
+ if (inetdev_valid_mtu(dev->mtu))
break;
- /* MTU falled under 68, disable IP */
+ /* disable IP when MTU is not enough */
case NETDEV_UNREGISTER:
inetdev_destroy(in_dev);
break;
}
EXPORT_SYMBOL_GPL(inet_twdr_twcal_tick);
+
+void inet_twsk_purge(struct net *net, struct inet_hashinfo *hashinfo,
+ struct inet_timewait_death_row *twdr, int family)
+{
+ struct inet_timewait_sock *tw;
+ struct sock *sk;
+ struct hlist_node *node;
+ int h;
+
+ local_bh_disable();
+ for (h = 0; h < (hashinfo->ehash_size); h++) {
+ struct inet_ehash_bucket *head =
+ inet_ehash_bucket(hashinfo, h);
+ rwlock_t *lock = inet_ehash_lockp(hashinfo, h);
+restart:
+ write_lock(lock);
+ sk_for_each(sk, node, &head->twchain) {
+
+ tw = inet_twsk(sk);
+ if (!net_eq(twsk_net(tw), net) ||
+ tw->tw_family != family)
+ continue;
+
+ atomic_inc(&tw->tw_refcnt);
+ write_unlock(lock);
+ inet_twsk_deschedule(tw, twdr);
+ inet_twsk_put(tw);
+
+ goto restart;
+ }
+ write_unlock(lock);
+ }
+ local_bh_enable();
+}
+EXPORT_SYMBOL_GPL(inet_twsk_purge);
static void __net_exit tcp_sk_exit(struct net *net)
{
inet_ctl_sock_destroy(net->ipv4.tcp_sock);
+ inet_twsk_purge(net, &tcp_hashinfo, &tcp_death_row, AF_INET);
}
static struct pernet_operations __net_initdata tcp_sk_ops = {
}
#ifdef CONFIG_IPV6_OPTIMISTIC_DAD
- /*
- * Here if the dst entry we've looked up
- * has a neighbour entry that is in the INCOMPLETE
- * state and the src address from the flow is
- * marked as OPTIMISTIC, we release the found
- * dst entry and replace it instead with the
- * dst entry of the nexthop router
- */
- if (!((*dst)->neighbour->nud_state & NUD_VALID)) {
- struct inet6_ifaddr *ifp;
- struct flowi fl_gw;
- int redirect;
-
- ifp = ipv6_get_ifaddr(net, &fl->fl6_src,
- (*dst)->dev, 1);
-
- redirect = (ifp && ifp->flags & IFA_F_OPTIMISTIC);
- if (ifp)
- in6_ifa_put(ifp);
-
- if (redirect) {
- /*
- * We need to get the dst entry for the
- * default router instead
- */
- dst_release(*dst);
- memcpy(&fl_gw, fl, sizeof(struct flowi));
- memset(&fl_gw.fl6_dst, 0, sizeof(struct in6_addr));
- *dst = ip6_route_output(net, sk, &fl_gw);
- if ((err = (*dst)->error))
- goto out_err_release;
- }
+ /*
+ * Here if the dst entry we've looked up
+ * has a neighbour entry that is in the INCOMPLETE
+ * state and the src address from the flow is
+ * marked as OPTIMISTIC, we release the found
+ * dst entry and replace it instead with the
+ * dst entry of the nexthop router
+ */
+ if ((*dst)->neighbour && !((*dst)->neighbour->nud_state & NUD_VALID)) {
+ struct inet6_ifaddr *ifp;
+ struct flowi fl_gw;
+ int redirect;
+
+ ifp = ipv6_get_ifaddr(net, &fl->fl6_src,
+ (*dst)->dev, 1);
+
+ redirect = (ifp && ifp->flags & IFA_F_OPTIMISTIC);
+ if (ifp)
+ in6_ifa_put(ifp);
+
+ if (redirect) {
+ /*
+ * We need to get the dst entry for the
+ * default router instead
+ */
+ dst_release(*dst);
+ memcpy(&fl_gw, fl, sizeof(struct flowi));
+ memset(&fl_gw.fl6_dst, 0, sizeof(struct in6_addr));
+ *dst = ip6_route_output(net, sk, &fl_gw);
+ if ((err = (*dst)->error))
+ goto out_err_release;
}
+ }
#endif
return 0;
skb_checksum_complete(skb)) {
atomic_inc(&sk->sk_drops);
kfree_skb(skb);
- return 0;
+ return NET_RX_DROP;
}
/* Charge it to the socket. */
if (sock_queue_rcv_skb(sk,skb)<0) {
atomic_inc(&sk->sk_drops);
kfree_skb(skb);
- return 0;
+ return NET_RX_DROP;
}
return 0;
if (skb_checksum_complete(skb)) {
atomic_inc(&sk->sk_drops);
kfree_skb(skb);
- return 0;
+ return NET_RX_DROP;
}
}
static void tcpv6_net_exit(struct net *net)
{
inet_ctl_sock_destroy(net->ipv6.tcp_sk);
+ inet_twsk_purge(net, &tcp_hashinfo, &tcp_death_row, AF_INET6);
}
static struct pernet_operations tcpv6_net_ops = {
key = sdata->default_key;
if (key) {
sprintf(buf, "../keys/%d", key->debugfs.cnt);
- sdata->debugfs.default_key =
+ sdata->common_debugfs.default_key =
debugfs_create_symlink("default_key",
sdata->debugfsdir, buf);
} else
if (!sdata)
return;
- debugfs_remove(sdata->debugfs.default_key);
- sdata->debugfs.default_key = NULL;
+ debugfs_remove(sdata->common_debugfs.default_key);
+ sdata->common_debugfs.default_key = NULL;
}
void ieee80211_debugfs_key_sta_del(struct ieee80211_key *key,
struct {
struct dentry *mode;
} monitor;
- struct dentry *default_key;
} debugfs;
+ struct {
+ struct dentry *default_key;
+ } common_debugfs;
#ifdef CONFIG_MAC80211_MESH
struct dentry *mesh_stats_dir;
static void ieee80211_sta_send_associnfo(struct net_device *dev,
struct ieee80211_if_sta *ifsta)
{
+ char *buf;
+ size_t len;
+ int i;
union iwreq_data wrqu;
+ if (!ifsta->assocreq_ies && !ifsta->assocresp_ies)
+ return;
+
+ buf = kmalloc(50 + 2 * (ifsta->assocreq_ies_len +
+ ifsta->assocresp_ies_len), GFP_KERNEL);
+ if (!buf)
+ return;
+
+ len = sprintf(buf, "ASSOCINFO(");
if (ifsta->assocreq_ies) {
- memset(&wrqu, 0, sizeof(wrqu));
- wrqu.data.length = ifsta->assocreq_ies_len;
- wireless_send_event(dev, IWEVASSOCREQIE, &wrqu,
- ifsta->assocreq_ies);
+ len += sprintf(buf + len, "ReqIEs=");
+ for (i = 0; i < ifsta->assocreq_ies_len; i++) {
+ len += sprintf(buf + len, "%02x",
+ ifsta->assocreq_ies[i]);
+ }
}
-
if (ifsta->assocresp_ies) {
- memset(&wrqu, 0, sizeof(wrqu));
- wrqu.data.length = ifsta->assocresp_ies_len;
- wireless_send_event(dev, IWEVASSOCRESPIE, &wrqu,
- ifsta->assocresp_ies);
+ if (ifsta->assocreq_ies)
+ len += sprintf(buf + len, " ");
+ len += sprintf(buf + len, "RespIEs=");
+ for (i = 0; i < ifsta->assocresp_ies_len; i++) {
+ len += sprintf(buf + len, "%02x",
+ ifsta->assocresp_ies[i]);
+ }
+ }
+ len += sprintf(buf + len, ")");
+
+ if (len > IW_CUSTOM_MAX) {
+ len = sprintf(buf, "ASSOCRESPIE=");
+ for (i = 0; i < ifsta->assocresp_ies_len; i++) {
+ len += sprintf(buf + len, "%02x",
+ ifsta->assocresp_ies[i]);
+ }
}
+
+ memset(&wrqu, 0, sizeof(wrqu));
+ wrqu.data.length = len;
+ wireless_send_event(dev, IWEVCUSTOM, &wrqu, buf);
+
+ kfree(buf);
}
static int parse_dcc(char *data, const char *data_end, u_int32_t *ip,
u_int16_t *port, char **ad_beg_p, char **ad_end_p)
{
+ char *tmp;
+
/* at least 12: "AAAAAAAA P\1\n" */
while (*data++ != ' ')
if (data > data_end - 12)
return -1;
+ /* Make sure we have a newline character within the packet boundaries
+ * because simple_strtoul parses until the first invalid character. */
+ for (tmp = data; tmp <= data_end; tmp++)
+ if (*tmp == '\n')
+ break;
+ if (tmp > data_end || *tmp != '\n')
+ return -1;
+
*ad_beg_p = data;
*ip = simple_strtoul(data, &data, 10);
void nf_ct_gre_keymap_flush(void)
{
- struct list_head *pos, *n;
+ struct nf_ct_gre_keymap *km, *tmp;
write_lock_bh(&nf_ct_gre_lock);
- list_for_each_safe(pos, n, &gre_keymap_list) {
- list_del(pos);
- kfree(pos);
+ list_for_each_entry_safe(km, tmp, &gre_keymap_list, list) {
+ list_del(&km->list);
+ kfree(km);
}
write_unlock_bh(&nf_ct_gre_lock);
}
kmp = &help->help.ct_pptp_info.keymap[dir];
if (*kmp) {
/* check whether it's a retransmission */
+ read_lock_bh(&nf_ct_gre_lock);
list_for_each_entry(km, &gre_keymap_list, list) {
- if (gre_key_cmpfn(km, t) && km == *kmp)
+ if (gre_key_cmpfn(km, t) && km == *kmp) {
+ read_unlock_bh(&nf_ct_gre_lock);
return 0;
+ }
}
+ read_unlock_bh(&nf_ct_gre_lock);
pr_debug("trying to override keymap_%s for ct %p\n",
dir == IP_CT_DIR_REPLY ? "reply" : "orig", ct);
return -EEXIST;
static int process_sip_response(struct sk_buff *skb,
const char **dptr, unsigned int *datalen)
{
- static const struct sip_handler *handler;
enum ip_conntrack_info ctinfo;
struct nf_conn *ct = nf_ct_get(skb, &ctinfo);
unsigned int matchoff, matchlen;
dataoff = matchoff + matchlen + 1;
for (i = 0; i < ARRAY_SIZE(sip_handlers); i++) {
+ const struct sip_handler *handler;
+
handler = &sip_handlers[i];
if (handler->response == NULL)
continue;
static int process_sip_request(struct sk_buff *skb,
const char **dptr, unsigned int *datalen)
{
- static const struct sip_handler *handler;
enum ip_conntrack_info ctinfo;
struct nf_conn *ct = nf_ct_get(skb, &ctinfo);
unsigned int matchoff, matchlen;
unsigned int cseq, i;
for (i = 0; i < ARRAY_SIZE(sip_handlers); i++) {
+ const struct sip_handler *handler;
+
handler = &sip_handlers[i];
if (handler->request == NULL)
continue;
}
}
- root_lock = qdisc_root_lock(q);
+ root_lock = qdisc_root_sleeping_lock(q);
if (tp == NULL) {
/* Proto-tcf does not exist, create new one */
static inline
void route4_reset_fastmap(struct Qdisc *q, struct route4_head *head, u32 id)
{
- spinlock_t *root_lock = qdisc_root_lock(q);
+ spinlock_t *root_lock = qdisc_root_sleeping_lock(q);
spin_lock_bh(root_lock);
memset(head->fastmap, 0, sizeof(head->fastmap));
if (q->stab && qdisc_dump_stab(skb, q->stab) < 0)
goto nla_put_failure;
- if (gnet_stats_start_copy_compat(skb, TCA_STATS2, TCA_STATS,
- TCA_XSTATS, qdisc_root_lock(q), &d) < 0)
+ if (gnet_stats_start_copy_compat(skb, TCA_STATS2, TCA_STATS, TCA_XSTATS,
+ qdisc_root_sleeping_lock(q), &d) < 0)
goto nla_put_failure;
if (q->ops->dump_stats && q->ops->dump_stats(q, &d) < 0)
if (cl_ops->dump && cl_ops->dump(q, cl, skb, tcm) < 0)
goto nla_put_failure;
- if (gnet_stats_start_copy_compat(skb, TCA_STATS2, TCA_STATS,
- TCA_XSTATS, qdisc_root_lock(q), &d) < 0)
+ if (gnet_stats_start_copy_compat(skb, TCA_STATS2, TCA_STATS, TCA_XSTATS,
+ qdisc_root_sleeping_lock(q), &d) < 0)
goto nla_put_failure;
if (cl_ops->dump_stats && cl_ops->dump_stats(q, cl, &d) < 0)
if (--cl->refcnt == 0) {
#ifdef CONFIG_NET_CLS_ACT
- spinlock_t *root_lock = qdisc_root_lock(sch);
+ spinlock_t *root_lock = qdisc_root_sleeping_lock(sch);
struct cbq_sched_data *q = qdisc_priv(sch);
spin_lock_bh(root_lock);
static int htb_dump(struct Qdisc *sch, struct sk_buff *skb)
{
- spinlock_t *root_lock = qdisc_root_lock(sch);
+ spinlock_t *root_lock = qdisc_root_sleeping_lock(sch);
struct htb_sched *q = qdisc_priv(sch);
struct nlattr *nest;
struct tc_htb_glob gopt;
struct sk_buff *skb, struct tcmsg *tcm)
{
struct htb_class *cl = (struct htb_class *)arg;
- spinlock_t *root_lock = qdisc_root_lock(sch);
+ spinlock_t *root_lock = qdisc_root_sleeping_lock(sch);
struct nlattr *nest;
struct tc_htb_opt opt;
for (i = 0; i < n; i++)
d->table[i] = data[i];
- root_lock = qdisc_root_lock(sch);
+ root_lock = qdisc_root_sleeping_lock(sch);
spin_lock_bh(root_lock);
d = xchg(&q->delay_dist, d);
txq = netdev_get_tx_queue(master->dev, 0);
master->slaves = NULL;
- root_lock = qdisc_root_lock(txq->qdisc);
+ root_lock = qdisc_root_sleeping_lock(txq->qdisc);
spin_lock_bh(root_lock);
qdisc_reset(txq->qdisc);
spin_unlock_bh(root_lock);
void __user *buffer, size_t *lenp, loff_t *ppos)
{
char tmpbuf[256];
- int len;
+ size_t len;
+
if ((*ppos && !write) || !*lenp) {
*lenp = 0;
return 0;
}
- if (write)
- return -EINVAL;
- else {
- len = svc_print_xprts(tmpbuf, sizeof(tmpbuf));
- if (!access_ok(VERIFY_WRITE, buffer, len))
- return -EFAULT;
-
- if (__copy_to_user(buffer, tmpbuf, len))
- return -EFAULT;
- }
- *lenp -= len;
- *ppos += len;
- return 0;
+ len = svc_print_xprts(tmpbuf, sizeof(tmpbuf));
+ return simple_read_from_buffer(buffer, *lenp, ppos, tmpbuf, len);
}
static int
dprintk("svcrdma: rqstp=%p\n", rqstp);
- spin_lock_bh(&rdma_xprt->sc_read_complete_lock);
+ spin_lock_bh(&rdma_xprt->sc_rq_dto_lock);
if (!list_empty(&rdma_xprt->sc_read_complete_q)) {
ctxt = list_entry(rdma_xprt->sc_read_complete_q.next,
struct svc_rdma_op_ctxt,
dto_q);
list_del_init(&ctxt->dto_q);
}
- spin_unlock_bh(&rdma_xprt->sc_read_complete_lock);
- if (ctxt)
+ if (ctxt) {
+ spin_unlock_bh(&rdma_xprt->sc_rq_dto_lock);
return rdma_read_complete(rqstp, ctxt);
+ }
- spin_lock_bh(&rdma_xprt->sc_rq_dto_lock);
if (!list_empty(&rdma_xprt->sc_rq_dto_q)) {
ctxt = list_entry(rdma_xprt->sc_rq_dto_q.next,
struct svc_rdma_op_ctxt,
if (test_bit(RDMACTXT_F_LAST_CTXT, &ctxt->flags)) {
struct svc_rdma_op_ctxt *read_hdr = ctxt->read_hdr;
BUG_ON(!read_hdr);
+ spin_lock_bh(&xprt->sc_rq_dto_lock);
set_bit(XPT_DATA, &xprt->sc_xprt.xpt_flags);
- spin_lock_bh(&xprt->sc_read_complete_lock);
list_add_tail(&read_hdr->dto_q,
&xprt->sc_read_complete_q);
- spin_unlock_bh(&xprt->sc_read_complete_lock);
+ spin_unlock_bh(&xprt->sc_rq_dto_lock);
svc_xprt_enqueue(&xprt->sc_xprt);
}
svc_rdma_put_context(ctxt, 0);
init_waitqueue_head(&cma_xprt->sc_send_wait);
spin_lock_init(&cma_xprt->sc_lock);
- spin_lock_init(&cma_xprt->sc_read_complete_lock);
spin_lock_init(&cma_xprt->sc_rq_dto_lock);
cma_xprt->sc_ord = svcrdma_ord;
struct media media;
struct bcbearer_pair bpairs[MAX_BEARERS];
struct bcbearer_pair bpairs_temp[TIPC_MAX_LINK_PRI + 1];
- struct node_map remains;
- struct node_map remains_new;
+ struct tipc_node_map remains;
+ struct tipc_node_map remains_new;
};
/**
struct bclink {
struct link link;
- struct node node;
+ struct tipc_node node;
};
* Called with 'node' locked, bc_lock unlocked
*/
-static void bclink_set_gap(struct node *n_ptr)
+static void bclink_set_gap(struct tipc_node *n_ptr)
{
struct sk_buff *buf = n_ptr->bclink.deferred_head;
* Node is locked, bc_lock unlocked.
*/
-void tipc_bclink_acknowledge(struct node *n_ptr, u32 acked)
+void tipc_bclink_acknowledge(struct tipc_node *n_ptr, u32 acked)
{
struct sk_buff *crs;
struct sk_buff *next;
* tipc_net_lock and node lock set
*/
-static void bclink_send_ack(struct node *n_ptr)
+static void bclink_send_ack(struct tipc_node *n_ptr)
{
struct link *l_ptr = n_ptr->active_links[n_ptr->addr & 1];
* tipc_net_lock and node lock set
*/
-static void bclink_send_nack(struct node *n_ptr)
+static void bclink_send_nack(struct tipc_node *n_ptr)
{
struct sk_buff *buf;
struct tipc_msg *msg;
* tipc_net_lock and node lock set
*/
-void tipc_bclink_check_gap(struct node *n_ptr, u32 last_sent)
+void tipc_bclink_check_gap(struct tipc_node *n_ptr, u32 last_sent)
{
if (!n_ptr->bclink.supported ||
less_eq(last_sent, mod(n_ptr->bclink.last_in)))
static void tipc_bclink_peek_nack(u32 dest, u32 sender_tag, u32 gap_after, u32 gap_to)
{
- struct node *n_ptr = tipc_node_find(dest);
+ struct tipc_node *n_ptr = tipc_node_find(dest);
u32 my_after, my_to;
if (unlikely(!n_ptr || !tipc_node_is_up(n_ptr)))
static int rx_count = 0;
#endif
struct tipc_msg *msg = buf_msg(buf);
- struct node* node = tipc_node_find(msg_prevnode(msg));
+ struct tipc_node* node = tipc_node_find(msg_prevnode(msg));
u32 next_in;
u32 seqno;
struct sk_buff *deferred;
return last_sent;
}
-u32 tipc_bclink_acks_missing(struct node *n_ptr)
+u32 tipc_bclink_acks_missing(struct tipc_node *n_ptr)
{
return (n_ptr->bclink.supported &&
(tipc_bclink_get_last_sent() != n_ptr->bclink.acked));
#define WSIZE 32
/**
- * struct node_map - set of node identifiers
+ * struct tipc_node_map - set of node identifiers
* @count: # of nodes in set
* @map: bitmap of node identifiers that are in the set
*/
-struct node_map {
+struct tipc_node_map {
u32 count;
u32 map[MAX_NODES / WSIZE];
};
};
-struct node;
+struct tipc_node;
extern char tipc_bclink_name[];
* nmap_add - add a node to a node map
*/
-static inline void tipc_nmap_add(struct node_map *nm_ptr, u32 node)
+static inline void tipc_nmap_add(struct tipc_node_map *nm_ptr, u32 node)
{
int n = tipc_node(node);
int w = n / WSIZE;
* nmap_remove - remove a node from a node map
*/
-static inline void tipc_nmap_remove(struct node_map *nm_ptr, u32 node)
+static inline void tipc_nmap_remove(struct tipc_node_map *nm_ptr, u32 node)
{
int n = tipc_node(node);
int w = n / WSIZE;
* nmap_equal - test for equality of node maps
*/
-static inline int tipc_nmap_equal(struct node_map *nm_a, struct node_map *nm_b)
+static inline int tipc_nmap_equal(struct tipc_node_map *nm_a, struct tipc_node_map *nm_b)
{
return !memcmp(nm_a, nm_b, sizeof(*nm_a));
}
* @nm_diff: output node map A-B (i.e. nodes of A that are not in B)
*/
-static inline void tipc_nmap_diff(struct node_map *nm_a, struct node_map *nm_b,
- struct node_map *nm_diff)
+static inline void tipc_nmap_diff(struct tipc_node_map *nm_a, struct tipc_node_map *nm_b,
+ struct tipc_node_map *nm_diff)
{
int stop = sizeof(nm_a->map) / sizeof(u32);
int w;
int tipc_bclink_init(void);
void tipc_bclink_stop(void);
-void tipc_bclink_acknowledge(struct node *n_ptr, u32 acked);
+void tipc_bclink_acknowledge(struct tipc_node *n_ptr, u32 acked);
int tipc_bclink_send_msg(struct sk_buff *buf);
void tipc_bclink_recv_pkt(struct sk_buff *buf);
u32 tipc_bclink_get_last_sent(void);
-u32 tipc_bclink_acks_missing(struct node *n_ptr);
-void tipc_bclink_check_gap(struct node *n_ptr, u32 seqno);
+u32 tipc_bclink_acks_missing(struct tipc_node *n_ptr);
+void tipc_bclink_check_gap(struct tipc_node *n_ptr, u32 seqno);
int tipc_bclink_stats(char *stats_buf, const u32 buf_size);
int tipc_bclink_reset_stats(void);
int tipc_bclink_set_queue_limits(u32 limit);
spin_lock_bh(&b_ptr->publ.lock);
b_ptr->publ.blocked = 1;
list_for_each_entry_safe(l_ptr, temp_l_ptr, &b_ptr->links, link_list) {
- struct node *n_ptr = l_ptr->owner;
+ struct tipc_node *n_ptr = l_ptr->owner;
spin_lock_bh(&n_ptr->lock);
tipc_link_reset(l_ptr);
u32 continue_count;
int active;
char net_plane;
- struct node_map nodes;
+ struct tipc_node_map nodes;
};
struct bearer_name {
u32 lower, u32 upper);
static struct sk_buff *tipc_cltr_prepare_routing_msg(u32 data_size, u32 dest);
-struct node **tipc_local_nodes = NULL;
-struct node_map tipc_cltr_bcast_nodes = {0,{0,}};
+struct tipc_node **tipc_local_nodes = NULL;
+struct tipc_node_map tipc_cltr_bcast_nodes = {0,{0,}};
u32 tipc_highest_allowed_slave = 0;
struct cluster *tipc_cltr_create(u32 addr)
u32 tipc_cltr_next_node(struct cluster *c_ptr, u32 addr)
{
- struct node *n_ptr;
+ struct tipc_node *n_ptr;
u32 n_num = tipc_node(addr) + 1;
if (!c_ptr)
return 0;
}
-void tipc_cltr_attach_node(struct cluster *c_ptr, struct node *n_ptr)
+void tipc_cltr_attach_node(struct cluster *c_ptr, struct tipc_node *n_ptr)
{
u32 n_num = tipc_node(n_ptr->addr);
u32 max_n_num = tipc_max_nodes;
* Uses deterministic and fair algorithm.
*/
-struct node *tipc_cltr_select_node(struct cluster *c_ptr, u32 selector)
+struct tipc_node *tipc_cltr_select_node(struct cluster *c_ptr, u32 selector)
{
u32 n_num;
u32 mask = tipc_max_nodes;
{
struct tipc_msg *msg = buf_msg(buf);
struct cluster *c_ptr;
- struct node *n_ptr;
+ struct tipc_node *n_ptr;
unchar *node_table;
u32 table_size;
u32 router;
u32 lower, u32 upper)
{
struct sk_buff *buf_copy;
- struct node *n_ptr;
+ struct tipc_node *n_ptr;
u32 n_num;
u32 tstop;
{
struct sk_buff *buf_copy;
struct cluster *c_ptr;
- struct node *n_ptr;
+ struct tipc_node *n_ptr;
u32 n_num;
u32 tstart;
u32 tstop;
struct cluster {
u32 addr;
struct _zone *owner;
- struct node **nodes;
+ struct tipc_node **nodes;
u32 highest_node;
u32 highest_slave;
};
-extern struct node **tipc_local_nodes;
+extern struct tipc_node **tipc_local_nodes;
extern u32 tipc_highest_allowed_slave;
-extern struct node_map tipc_cltr_bcast_nodes;
+extern struct tipc_node_map tipc_cltr_bcast_nodes;
void tipc_cltr_remove_as_router(struct cluster *c_ptr, u32 router);
void tipc_cltr_send_ext_routes(struct cluster *c_ptr, u32 dest);
-struct node *tipc_cltr_select_node(struct cluster *c_ptr, u32 selector);
+struct tipc_node *tipc_cltr_select_node(struct cluster *c_ptr, u32 selector);
u32 tipc_cltr_select_router(struct cluster *c_ptr, u32 ref);
void tipc_cltr_recv_routing_table(struct sk_buff *buf);
struct cluster *tipc_cltr_create(u32 addr);
void tipc_cltr_delete(struct cluster *c_ptr);
-void tipc_cltr_attach_node(struct cluster *c_ptr, struct node *n_ptr);
+void tipc_cltr_attach_node(struct cluster *c_ptr, struct tipc_node *n_ptr);
void tipc_cltr_send_slave_routes(struct cluster *c_ptr, u32 dest);
void tipc_cltr_broadcast(struct sk_buff *buf);
int tipc_cltr_init(void);
/* Always accept link here */
struct sk_buff *rbuf;
struct tipc_media_addr *addr;
- struct node *n_ptr = tipc_node_find(orig);
+ struct tipc_node *n_ptr = tipc_node_find(orig);
int link_fully_up;
dbg(" in own cluster\n");
int tipc_link_send(struct sk_buff *buf, u32 dest, u32 selector)
{
struct link *l_ptr;
- struct node *n_ptr;
+ struct tipc_node *n_ptr;
int res = -ELINKCONG;
read_lock_bh(&tipc_net_lock);
int tipc_send_buf_fast(struct sk_buff *buf, u32 destnode)
{
struct link *l_ptr;
- struct node *n_ptr;
+ struct tipc_node *n_ptr;
int res;
u32 selector = msg_origport(buf_msg(buf)) & 1;
u32 dummy;
struct tipc_msg *hdr = &sender->publ.phdr;
struct link *l_ptr;
struct sk_buff *buf;
- struct node *node;
+ struct tipc_node *node;
int res;
u32 selector = msg_origport(hdr) & 1;
u32 destaddr)
{
struct link *l_ptr;
- struct node *node;
+ struct tipc_node *node;
struct tipc_msg *hdr = &sender->publ.phdr;
u32 dsz = msg_data_sz(hdr);
u32 max_pkt,fragm_sz,rest;
static void link_reset_all(unsigned long addr)
{
- struct node *n_ptr;
+ struct tipc_node *n_ptr;
char addr_string[16];
u32 i;
/* Handle failure on broadcast link */
- struct node *n_ptr;
+ struct tipc_node *n_ptr;
char addr_string[16];
tipc_printf(TIPC_OUTPUT, "Msg seq number: %u, ", msg_seqno(msg));
read_lock_bh(&tipc_net_lock);
while (head) {
struct bearer *b_ptr = (struct bearer *)tb_ptr;
- struct node *n_ptr;
+ struct tipc_node *n_ptr;
struct link *l_ptr;
struct sk_buff *crs;
struct sk_buff *buf = head;
* Returns pointer to link (or 0 if invalid link name).
*/
-static struct link *link_find_link(const char *name, struct node **node)
+static struct link *link_find_link(const char *name, struct tipc_node **node)
{
struct link_name link_name_parts;
struct bearer *b_ptr;
struct tipc_link_config *args;
u32 new_value;
struct link *l_ptr;
- struct node *node;
+ struct tipc_node *node;
int res;
if (!TLV_CHECK(req_tlv_area, req_tlv_space, TIPC_TLV_LINK_CONFIG))
{
char *link_name;
struct link *l_ptr;
- struct node *node;
+ struct tipc_node *node;
if (!TLV_CHECK(req_tlv_area, req_tlv_space, TIPC_TLV_LINK_NAME))
return tipc_cfg_reply_error_string(TIPC_CFG_TLV_ERROR);
{
struct print_buf pb;
struct link *l_ptr;
- struct node *node;
+ struct tipc_node *node;
char *status;
u32 profile_total = 0;
int res = -EINVAL;
struct link *l_ptr;
u32 bearer_id;
- struct node * node;
+ struct tipc_node * node;
u32 a;
a = link_name2addr(name, &bearer_id);
u32 tipc_link_get_max_pkt(u32 dest, u32 selector)
{
- struct node *n_ptr;
+ struct tipc_node *n_ptr;
struct link *l_ptr;
u32 res = MAX_PKT_DEFAULT;
char name[TIPC_MAX_LINK_NAME];
struct tipc_media_addr media_addr;
struct timer_list timer;
- struct node *owner;
+ struct tipc_node *owner;
struct list_head link_list;
/* Management and link supervision data */
u32 node;
u32 ref;
u32 key;
- struct node_subscr subscr;
+ struct tipc_node_subscr subscr;
struct list_head local_list;
struct list_head pport_list;
struct publication *node_list_next;
DEFINE_RWLOCK(tipc_net_lock);
struct network tipc_net = { NULL };
-struct node *tipc_net_select_remote_node(u32 addr, u32 ref)
+struct tipc_node *tipc_net_select_remote_node(u32 addr, u32 ref)
{
return tipc_zone_select_remote_node(tipc_net.zones[tipc_zone(addr)], addr, ref);
}
void tipc_net_remove_as_router(u32 router);
void tipc_net_send_external_routes(u32 dest);
void tipc_net_route_msg(struct sk_buff *buf);
-struct node *tipc_net_select_remote_node(u32 addr, u32 ref);
+struct tipc_node *tipc_net_select_remote_node(u32 addr, u32 ref);
u32 tipc_net_select_router(u32 addr, u32 ref);
int tipc_net_start(u32 addr);
#include "bearer.h"
#include "name_distr.h"
-void node_print(struct print_buf *buf, struct node *n_ptr, char *str);
-static void node_lost_contact(struct node *n_ptr);
-static void node_established_contact(struct node *n_ptr);
+void node_print(struct print_buf *buf, struct tipc_node *n_ptr, char *str);
+static void node_lost_contact(struct tipc_node *n_ptr);
+static void node_established_contact(struct tipc_node *n_ptr);
-struct node *tipc_nodes = NULL; /* sorted list of nodes within cluster */
+struct tipc_node *tipc_nodes = NULL; /* sorted list of nodes within cluster */
static DEFINE_SPINLOCK(node_create_lock);
* but this is a non-trivial change.)
*/
-struct node *tipc_node_create(u32 addr)
+struct tipc_node *tipc_node_create(u32 addr)
{
struct cluster *c_ptr;
- struct node *n_ptr;
- struct node **curr_node;
+ struct tipc_node *n_ptr;
+ struct tipc_node **curr_node;
spin_lock_bh(&node_create_lock);
return n_ptr;
}
-void tipc_node_delete(struct node *n_ptr)
+void tipc_node_delete(struct tipc_node *n_ptr)
{
if (!n_ptr)
return;
* Link becomes active (alone or shared) or standby, depending on its priority.
*/
-void tipc_node_link_up(struct node *n_ptr, struct link *l_ptr)
+void tipc_node_link_up(struct tipc_node *n_ptr, struct link *l_ptr)
{
struct link **active = &n_ptr->active_links[0];
* node_select_active_links - select active link
*/
-static void node_select_active_links(struct node *n_ptr)
+static void node_select_active_links(struct tipc_node *n_ptr)
{
struct link **active = &n_ptr->active_links[0];
u32 i;
* tipc_node_link_down - handle loss of link
*/
-void tipc_node_link_down(struct node *n_ptr, struct link *l_ptr)
+void tipc_node_link_down(struct tipc_node *n_ptr, struct link *l_ptr)
{
struct link **active;
node_lost_contact(n_ptr);
}
-int tipc_node_has_active_links(struct node *n_ptr)
+int tipc_node_has_active_links(struct tipc_node *n_ptr)
{
return (n_ptr &&
((n_ptr->active_links[0]) || (n_ptr->active_links[1])));
}
-int tipc_node_has_redundant_links(struct node *n_ptr)
+int tipc_node_has_redundant_links(struct tipc_node *n_ptr)
{
return (n_ptr->working_links > 1);
}
-static int tipc_node_has_active_routes(struct node *n_ptr)
+static int tipc_node_has_active_routes(struct tipc_node *n_ptr)
{
return (n_ptr && (n_ptr->last_router >= 0));
}
-int tipc_node_is_up(struct node *n_ptr)
+int tipc_node_is_up(struct tipc_node *n_ptr)
{
return (tipc_node_has_active_links(n_ptr) || tipc_node_has_active_routes(n_ptr));
}
-struct node *tipc_node_attach_link(struct link *l_ptr)
+struct tipc_node *tipc_node_attach_link(struct link *l_ptr)
{
- struct node *n_ptr = tipc_node_find(l_ptr->addr);
+ struct tipc_node *n_ptr = tipc_node_find(l_ptr->addr);
if (!n_ptr)
n_ptr = tipc_node_create(l_ptr->addr);
return NULL;
}
-void tipc_node_detach_link(struct node *n_ptr, struct link *l_ptr)
+void tipc_node_detach_link(struct tipc_node *n_ptr, struct link *l_ptr)
{
n_ptr->links[l_ptr->b_ptr->identity] = NULL;
tipc_net.zones[tipc_zone(l_ptr->addr)]->links--;
*
*/
-static void node_established_contact(struct node *n_ptr)
+static void node_established_contact(struct tipc_node *n_ptr)
{
struct cluster *c_ptr;
tipc_highest_allowed_slave);
}
-static void node_lost_contact(struct node *n_ptr)
+static void node_lost_contact(struct tipc_node *n_ptr)
{
struct cluster *c_ptr;
- struct node_subscr *ns, *tns;
+ struct tipc_node_subscr *ns, *tns;
char addr_string[16];
u32 i;
* Called by when cluster local lookup has failed.
*/
-struct node *tipc_node_select_next_hop(u32 addr, u32 selector)
+struct tipc_node *tipc_node_select_next_hop(u32 addr, u32 selector)
{
- struct node *n_ptr;
+ struct tipc_node *n_ptr;
u32 router_addr;
if (!tipc_addr_domain_valid(addr))
* Uses a deterministic and fair algorithm for selecting router node.
*/
-u32 tipc_node_select_router(struct node *n_ptr, u32 ref)
+u32 tipc_node_select_router(struct tipc_node *n_ptr, u32 ref)
{
u32 ulim;
u32 mask;
return tipc_addr(own_zone(), own_cluster(), r);
}
-void tipc_node_add_router(struct node *n_ptr, u32 router)
+void tipc_node_add_router(struct tipc_node *n_ptr, u32 router)
{
u32 r_num = tipc_node(router);
!n_ptr->routers[n_ptr->last_router]);
}
-void tipc_node_remove_router(struct node *n_ptr, u32 router)
+void tipc_node_remove_router(struct tipc_node *n_ptr, u32 router)
{
u32 r_num = tipc_node(router);
}
#if 0
-void node_print(struct print_buf *buf, struct node *n_ptr, char *str)
+void node_print(struct print_buf *buf, struct tipc_node *n_ptr, char *str)
{
u32 i;
u32 tipc_available_nodes(const u32 domain)
{
- struct node *n_ptr;
+ struct tipc_node *n_ptr;
u32 cnt = 0;
read_lock_bh(&tipc_net_lock);
{
u32 domain;
struct sk_buff *buf;
- struct node *n_ptr;
+ struct tipc_node *n_ptr;
struct tipc_node_info node_info;
u32 payload_size;
{
u32 domain;
struct sk_buff *buf;
- struct node *n_ptr;
+ struct tipc_node *n_ptr;
struct tipc_link_info link_info;
u32 payload_size;
#include "bearer.h"
/**
- * struct node - TIPC node structure
+ * struct tipc_node - TIPC node structure
* @addr: network address of node
* @lock: spinlock governing access to structure
* @owner: pointer to cluster that node belongs to
* @defragm: list of partially reassembled b'cast message fragments from node
*/
-struct node {
+struct tipc_node {
u32 addr;
spinlock_t lock;
struct cluster *owner;
- struct node *next;
+ struct tipc_node *next;
struct list_head nsub;
struct link *active_links[2];
struct link *links[MAX_BEARERS];
} bclink;
};
-extern struct node *tipc_nodes;
+extern struct tipc_node *tipc_nodes;
extern u32 tipc_own_tag;
-struct node *tipc_node_create(u32 addr);
-void tipc_node_delete(struct node *n_ptr);
-struct node *tipc_node_attach_link(struct link *l_ptr);
-void tipc_node_detach_link(struct node *n_ptr, struct link *l_ptr);
-void tipc_node_link_down(struct node *n_ptr, struct link *l_ptr);
-void tipc_node_link_up(struct node *n_ptr, struct link *l_ptr);
-int tipc_node_has_active_links(struct node *n_ptr);
-int tipc_node_has_redundant_links(struct node *n_ptr);
-u32 tipc_node_select_router(struct node *n_ptr, u32 ref);
-struct node *tipc_node_select_next_hop(u32 addr, u32 selector);
-int tipc_node_is_up(struct node *n_ptr);
-void tipc_node_add_router(struct node *n_ptr, u32 router);
-void tipc_node_remove_router(struct node *n_ptr, u32 router);
+struct tipc_node *tipc_node_create(u32 addr);
+void tipc_node_delete(struct tipc_node *n_ptr);
+struct tipc_node *tipc_node_attach_link(struct link *l_ptr);
+void tipc_node_detach_link(struct tipc_node *n_ptr, struct link *l_ptr);
+void tipc_node_link_down(struct tipc_node *n_ptr, struct link *l_ptr);
+void tipc_node_link_up(struct tipc_node *n_ptr, struct link *l_ptr);
+int tipc_node_has_active_links(struct tipc_node *n_ptr);
+int tipc_node_has_redundant_links(struct tipc_node *n_ptr);
+u32 tipc_node_select_router(struct tipc_node *n_ptr, u32 ref);
+struct tipc_node *tipc_node_select_next_hop(u32 addr, u32 selector);
+int tipc_node_is_up(struct tipc_node *n_ptr);
+void tipc_node_add_router(struct tipc_node *n_ptr, u32 router);
+void tipc_node_remove_router(struct tipc_node *n_ptr, u32 router);
struct sk_buff *tipc_node_get_links(const void *req_tlv_area, int req_tlv_space);
struct sk_buff *tipc_node_get_nodes(const void *req_tlv_area, int req_tlv_space);
-static inline struct node *tipc_node_find(u32 addr)
+static inline struct tipc_node *tipc_node_find(u32 addr)
{
if (likely(in_own_cluster(addr)))
return tipc_local_nodes[tipc_node(addr)];
return NULL;
}
-static inline struct node *tipc_node_select(u32 addr, u32 selector)
+static inline struct tipc_node *tipc_node_select(u32 addr, u32 selector)
{
if (likely(in_own_cluster(addr)))
return tipc_local_nodes[tipc_node(addr)];
return tipc_node_select_next_hop(addr, selector);
}
-static inline void tipc_node_lock(struct node *n_ptr)
+static inline void tipc_node_lock(struct tipc_node *n_ptr)
{
spin_lock_bh(&n_ptr->lock);
}
-static inline void tipc_node_unlock(struct node *n_ptr)
+static inline void tipc_node_unlock(struct tipc_node *n_ptr)
{
spin_unlock_bh(&n_ptr->lock);
}
* tipc_nodesub_subscribe - create "node down" subscription for specified node
*/
-void tipc_nodesub_subscribe(struct node_subscr *node_sub, u32 addr,
+void tipc_nodesub_subscribe(struct tipc_node_subscr *node_sub, u32 addr,
void *usr_handle, net_ev_handler handle_down)
{
if (addr == tipc_own_addr) {
* tipc_nodesub_unsubscribe - cancel "node down" subscription (if any)
*/
-void tipc_nodesub_unsubscribe(struct node_subscr *node_sub)
+void tipc_nodesub_unsubscribe(struct tipc_node_subscr *node_sub)
{
if (!node_sub->node)
return;
typedef void (*net_ev_handler) (void *usr_handle);
/**
- * struct node_subscr - "node down" subscription entry
+ * struct tipc_node_subscr - "node down" subscription entry
* @node: ptr to node structure of interest (or NULL, if none)
* @handle_node_down: routine to invoke when node fails
* @usr_handle: argument to pass to routine when node fails
* @nodesub_list: adjacent entries in list of subscriptions for the node
*/
-struct node_subscr {
- struct node *node;
+struct tipc_node_subscr {
+ struct tipc_node *node;
net_ev_handler handle_node_down;
void *usr_handle;
struct list_head nodesub_list;
};
-void tipc_nodesub_subscribe(struct node_subscr *node_sub, u32 addr,
+void tipc_nodesub_subscribe(struct tipc_node_subscr *node_sub, u32 addr,
void *usr_handle, net_ev_handler handle_down);
-void tipc_nodesub_unsubscribe(struct node_subscr *node_sub);
+void tipc_nodesub_unsubscribe(struct tipc_node_subscr *node_sub);
#endif
u32 probing_interval;
u32 last_in_seqno;
struct timer_list timer;
- struct node_subscr subscription;
+ struct tipc_node_subscr subscription;
};
extern spinlock_t tipc_port_list_lock;
}
}
-struct node *tipc_zone_select_remote_node(struct _zone *z_ptr, u32 addr, u32 ref)
+struct tipc_node *tipc_zone_select_remote_node(struct _zone *z_ptr, u32 addr, u32 ref)
{
struct cluster *c_ptr;
- struct node *n_ptr;
+ struct tipc_node *n_ptr;
u32 c_num;
if (!z_ptr)
u32 links;
};
-struct node *tipc_zone_select_remote_node(struct _zone *z_ptr, u32 addr, u32 ref);
+struct tipc_node *tipc_zone_select_remote_node(struct _zone *z_ptr, u32 addr, u32 ref);
u32 tipc_zone_select_router(struct _zone *z_ptr, u32 addr, u32 ref);
void tipc_zone_remove_as_router(struct _zone *z_ptr, u32 router);
void tipc_zone_send_external_routes(struct _zone *z_ptr, u32 dest);
files in /sys/class/net/*/wireless/. The same information
is available via the ioctls as well.
- Say Y if you have programs using it (we don't know of any).
+ Say Y if you have programs using it, like old versions of
+ hal.
struct hlist_head *chain = policy_hash_bysel(&pol->selector,
pol->family, dir);
+ list_add_tail(&pol->bytype, &xfrm_policy_bytype[pol->type]);
hlist_add_head(&pol->bydst, chain);
hlist_add_head(&pol->byidx, xfrm_policy_byidx+idx_hash(pol->index));
xfrm_policy_count[dir]++;
* We can't enlist stable bundles either.
*/
write_unlock_bh(&policy->lock);
- if (dst)
- dst_free(dst);
+ dst_free(dst);
if (pol_dead)
XFRM_INC_STATS(LINUX_MIB_XFRMOUTPOLDEAD);
err = xfrm_dst_update_origin(dst, fl);
if (unlikely(err)) {
write_unlock_bh(&policy->lock);
- if (dst)
- dst_free(dst);
+ dst_free(dst);
XFRM_INC_STATS(LINUX_MIB_XFRMOUTBUNDLECHECKERROR);
goto error;
}
{
unsigned int h;
struct hlist_node *entry;
- struct xfrm_state *x, *x0;
+ struct xfrm_state *x, *x0, *to_put;
int acquire_in_progress = 0;
int error = 0;
struct xfrm_state *best = NULL;
+ to_put = NULL;
+
spin_lock_bh(&xfrm_state_lock);
h = xfrm_dst_hash(daddr, saddr, tmpl->reqid, family);
hlist_for_each_entry(x, entry, xfrm_state_bydst+h, bydst) {
if (tmpl->id.spi &&
(x0 = __xfrm_state_lookup(daddr, tmpl->id.spi,
tmpl->id.proto, family)) != NULL) {
- xfrm_state_put(x0);
+ to_put = x0;
error = -EEXIST;
goto out;
}
error = security_xfrm_state_alloc_acquire(x, pol->security, fl->secid);
if (error) {
x->km.state = XFRM_STATE_DEAD;
- xfrm_state_put(x);
+ to_put = x;
x = NULL;
goto out;
}
if (km_query(x, tmpl, pol) == 0) {
x->km.state = XFRM_STATE_ACQ;
+ list_add_tail(&x->all, &xfrm_state_all);
hlist_add_head(&x->bydst, xfrm_state_bydst+h);
h = xfrm_src_hash(daddr, saddr, family);
hlist_add_head(&x->bysrc, xfrm_state_bysrc+h);
xfrm_hash_grow_check(x->bydst.next != NULL);
} else {
x->km.state = XFRM_STATE_DEAD;
- xfrm_state_put(x);
+ to_put = x;
x = NULL;
error = -ESRCH;
}
else
*err = acquire_in_progress ? -EAGAIN : error;
spin_unlock_bh(&xfrm_state_lock);
+ if (to_put)
+ xfrm_state_put(to_put);
return x;
}
xfrm_state_hold(x);
x->timer.expires = jiffies + sysctl_xfrm_acq_expires*HZ;
add_timer(&x->timer);
+ list_add_tail(&x->all, &xfrm_state_all);
hlist_add_head(&x->bydst, xfrm_state_bydst+h);
h = xfrm_src_hash(daddr, saddr, family);
hlist_add_head(&x->bysrc, xfrm_state_bysrc+h);
int xfrm_state_add(struct xfrm_state *x)
{
- struct xfrm_state *x1;
+ struct xfrm_state *x1, *to_put;
int family;
int err;
int use_spi = xfrm_id_proto_match(x->id.proto, IPSEC_PROTO_ANY);
family = x->props.family;
+ to_put = NULL;
+
spin_lock_bh(&xfrm_state_lock);
x1 = __xfrm_state_locate(x, use_spi, family);
if (x1) {
- xfrm_state_put(x1);
+ to_put = x1;
x1 = NULL;
err = -EEXIST;
goto out;
x1 = __xfrm_find_acq_byseq(x->km.seq);
if (x1 && ((x1->id.proto != x->id.proto) ||
xfrm_addr_cmp(&x1->id.daddr, &x->id.daddr, family))) {
- xfrm_state_put(x1);
+ to_put = x1;
x1 = NULL;
}
}
xfrm_state_put(x1);
}
+ if (to_put)
+ xfrm_state_put(to_put);
+
return err;
}
EXPORT_SYMBOL(xfrm_state_add);
int xfrm_state_update(struct xfrm_state *x)
{
- struct xfrm_state *x1;
+ struct xfrm_state *x1, *to_put;
int err;
int use_spi = xfrm_id_proto_match(x->id.proto, IPSEC_PROTO_ANY);
+ to_put = NULL;
+
spin_lock_bh(&xfrm_state_lock);
x1 = __xfrm_state_locate(x, use_spi, x->props.family);
goto out;
if (xfrm_state_kern(x1)) {
- xfrm_state_put(x1);
+ to_put = x1;
err = -EEXIST;
goto out;
}
out:
spin_unlock_bh(&xfrm_state_lock);
+ if (to_put)
+ xfrm_state_put(to_put);
+
if (err)
return err;
return 0;
if (!S_ISBLK(inode->i_mode) && !S_ISCHR(inode->i_mode))
return 0;
- dev_cgroup = css_to_devcgroup(task_subsys_state(current,
- devices_subsys_id));
- if (!dev_cgroup)
- return 0;
rcu_read_lock();
+
+ dev_cgroup = task_devcgroup(current);
+
list_for_each_entry_rcu(wh, &dev_cgroup->whitelist, list) {
if (wh->type & DEV_ALL)
goto acc_check;
rcu_read_unlock();
return 0;
}
+
rcu_read_unlock();
return -EPERM;
struct dev_cgroup *dev_cgroup;
struct dev_whitelist_item *wh;
- dev_cgroup = css_to_devcgroup(task_subsys_state(current,
- devices_subsys_id));
- if (!dev_cgroup)
- return 0;
-
rcu_read_lock();
+
+ dev_cgroup = task_devcgroup(current);
+
list_for_each_entry(wh, &dev_cgroup->whitelist, list) {
if (wh->type & DEV_ALL)
goto acc_check;
rcu_read_unlock();
return 0;
}
+
rcu_read_unlock();
+
return -EPERM;
}
/* Check the validity of the new context. */
if (!policydb_context_isvalid(pol, ctx)) {
rc = -EINVAL;
- context_destroy(ctx);
goto out;
}
rc = 0;
out:
+ if (rc)
+ context_destroy(ctx);
return rc;
}
} else if (rc)
goto out;
rc = sidtab_context_to_sid(&sidtab, &context, sid);
- if (rc)
- context_destroy(&context);
+ context_destroy(&context);
out:
read_unlock(&policy_rwlock);
kfree(scontext2);
endif # !M68K
+endif # SOUND
+
+# AC97_BUS is used from both sound and ucb1400
config AC97_BUS
tristate
help
sound although they're sharing the AC97 bus. Concerned drivers
should "select" this.
-endif # SOUND
SND_PCI_QUIRK(0x1043, 0x817f, "Asus P5LD2", ALC882_6ST_DIG),
SND_PCI_QUIRK(0x1043, 0x81d8, "Asus P5WD", ALC882_6ST_DIG),
SND_PCI_QUIRK(0x105b, 0x6668, "Foxconn", ALC882_6ST_DIG),
- SND_PCI_QUIRK(0x106b, 0x00a0, "Apple iMac 24''", ALC885_IMAC24),
SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte P35 DS3R", ALC882_6ST_DIG),
SND_PCI_QUIRK(0x1462, 0x28fb, "Targa T8", ALC882_TARGA), /* MSI-1049 T8 */
SND_PCI_QUIRK(0x1462, 0x6668, "MSI", ALC882_6ST_DIG),
{ }
};
+/* additional verbs for ALC663 */
+static struct hda_verb alc663_auto_init_verbs[] = {
+ {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ { }
+};
+
static struct hda_verb alc663_m51va_init_verbs[] = {
{0x21, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
{0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
if (!pin)
return 0;
+ if (pin == 0x17) {
+ /* ALC663 has a mono output pin on 0x17 */
+ sprintf(name, "%s Playback Switch", pfx);
+ err = add_control(spec, ALC_CTL_WIDGET_MUTE, name,
+ HDA_COMPOSE_AMP_VAL(pin, 2, 0, HDA_OUTPUT));
+ return err;
+ }
+
if (alc880_is_fixed_pin(pin)) {
nid = alc880_idx_to_dac(alc880_fixed_pin_idx(pin));
/* printk("DAC nid=%x\n",nid); */
spec->input_mux = &spec->private_imux;
spec->init_verbs[spec->num_init_verbs++] = alc662_auto_init_verbs;
+ if (codec->vendor_id == 0x10ec0663)
+ spec->init_verbs[spec->num_init_verbs++] =
+ alc663_auto_init_verbs;
+
+ err = alc_auto_add_mic_boost(codec);
+ if (err < 0)
+ return err;
+
spec->mixers[spec->num_mixers] = alc662_capture_mixer;
spec->num_mixers++;
return 1;
};
static struct hda_verb dell_m6_core_init[] = {
- /* set master volume and direct control */
- { 0x1f, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xff},
+ /* set master volume to max value without distortion
+ * and direct control */
+ { 0x1f, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xec},
/* setup audio connections */
{ 0x0d, AC_VERB_SET_CONNECT_SEL, 0x00},
{ 0x0a, AC_VERB_SET_CONNECT_SEL, 0x01},
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#include <linux/delay.h>
#include <linux/pci.h>
#include <sound/control.h>
#include <sound/core.h>
else
value |= AK4396_DFS_QUAD;
data->ak4396_ctl2 = value;
+
+ msleep(1); /* wait for the new MCLK to become stable */
+
ak4396_write(chip, AK4396_CONTROL_1, AK4396_DIF_24_MSB);
ak4396_write(chip, AK4396_CONTROL_2, value);
ak4396_write(chip, AK4396_CONTROL_1, AK4396_DIF_24_MSB | AK4396_RSTN);
* GPIO 1 -> DFS1 of AK5385
*/
+#include <linux/delay.h>
#include <linux/mutex.h>
#include <linux/pci.h>
#include <sound/ac97_codec.h>
else
value |= AK4396_DFS_QUAD;
data->ak4396_ctl2 = value;
+
+ msleep(1); /* wait for the new MCLK to become stable */
+
for (i = 0; i < 4; ++i) {
ak4396_write(chip, i,
AK4396_CONTROL_1, AK4396_DIF_24_MSB);
#include <linux/device.h>
#include <linux/delay.h>
#include <linux/clk.h>
+#include <linux/platform_device.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/initval.h>
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
- clk_i2s = clk_get(NULL, "I2SCLK");
if (IS_ERR(clk_i2s))
return PTR_ERR(clk_i2s);
pxa_gpio_mode(gpio_bus[pxa_i2s.master].tx);
pxa_gpio_mode(gpio_bus[pxa_i2s.master].frm);
pxa_gpio_mode(gpio_bus[pxa_i2s.master].clk);
+ BUG_ON(IS_ERR(clk_i2s));
clk_enable(clk_i2s);
pxa_i2s_wait();
EXPORT_SYMBOL_GPL(pxa_i2s_dai);
+static int pxa2xx_i2s_probe(struct platform_device *dev)
+{
+ clk_i2s = clk_get(&dev->dev, "I2SCLK");
+ return IS_ERR(clk_i2s) ? PTR_ERR(clk_i2s) : 0;
+}
+
+static int __devexit pxa2xx_i2s_remove(struct platform_device *dev)
+{
+ clk_put(clk_i2s);
+ clk_i2s = ERR_PTR(-ENOENT);
+ return 0;
+}
+
+static struct platform_driver pxa2xx_i2s_driver = {
+ .probe = pxa2xx_i2s_probe,
+ .remove = __devexit_p(pxa2xx_i2s_remove),
+
+ .driver = {
+ .name = "pxa2xx-i2s",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init pxa2xx_i2s_init(void)
+{
+ clk_i2s = ERR_PTR(-ENOENT);
+ return platform_driver_register(&pxa2xx_i2s_driver);
+}
+
+static void __exit pxa2xx_i2s_exit(void)
+{
+ platform_driver_unregister(&pxa2xx_i2s_driver);
+}
+
+module_init(pxa2xx_i2s_init);
+module_exit(pxa2xx_i2s_exit);
+
/* Module information */
MODULE_AUTHOR("Liam Girdwood, liam.girdwood@wolfsonmicro.com, www.wolfsonmicro.com");
MODULE_DESCRIPTION("pxa2xx I2S SoC Interface");
git.openpandora.org / pandora-kernel.git / commitdiff