hwmon: (w83795) Use standard attributes for chassis intrusion

Follow the standard attribute naming for the chassis intrusion
feature. I couldn't test the beeping (my board apparently doesn't do
that) but the alarm works fine.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>

diff --git a/drivers/hwmon/w83795.c b/drivers/hwmon/w83795.c
index c461e75..1d840aa 100644 (file)
--- a/drivers/hwmon/w83795.c
+++ b/drivers/hwmon/w83795.c
@@ -713,7 +713,7 @@ store_beep(struct device *dev, struct device_attribute *attr,
        return count;
 }
 
-/* Write any value to clear chassis alarm */
+/* Write 0 to clear chassis alarm */
 static ssize_t
 store_chassis_clear(struct device *dev,
                    struct device_attribute *attr, const char *buf,
@@ -721,7 +721,10 @@ store_chassis_clear(struct device *dev,
 {
        struct i2c_client *client = to_i2c_client(dev);
        struct w83795_data *data = i2c_get_clientdata(client);
-       u8 val;
+       unsigned long val;
+
+       if (strict_strtoul(buf, 10, &val) < 0 || val != 0)
+               return -EINVAL;
 
        mutex_lock(&data->update_lock);
        val = w83795_read(client, W83795_REG_CLR_CHASSIS);
@@ -1709,8 +1712,10 @@ static const struct sensor_device_attribute_2 w83795_pwm[][7] = {
 };
 
 static const struct sensor_device_attribute_2 sda_single_files[] = {
-       SENSOR_ATTR_2(chassis, S_IWUSR | S_IRUGO, show_alarm_beep,
+       SENSOR_ATTR_2(intrusion0_alarm, S_IWUSR | S_IRUGO, show_alarm_beep,
                      store_chassis_clear, ALARM_STATUS, 46),
+       SENSOR_ATTR_2(intrusion0_beep, S_IWUSR | S_IRUGO, show_alarm_beep,
+                     store_beep, BEEP_ENABLE, 46),
        SENSOR_ATTR_2(beep_enable, S_IWUSR | S_IRUGO, show_alarm_beep,
                      store_beep, BEEP_ENABLE, 47),
 #ifdef CONFIG_SENSORS_W83795_FANCTRL