bool
default n
+config GENERIC_HARDIRQS_NO__DO_IRQ
+ def_bool y
+
config GENERIC_HARDIRQS
bool
default y
*/
extern inline void __set_hae(unsigned long new_hae)
{
- unsigned long flags;
- local_irq_save(flags);
+ unsigned long flags = swpipl(IPL_MAX);
+
+ barrier();
alpha_mv.hae_cache = new_hae;
*alpha_mv.hae_register = new_hae;
/* Re-read to make sure it was written. */
new_hae = *alpha_mv.hae_register;
- local_irq_restore(flags);
+ setipl(flags);
+ barrier();
}
extern inline void set_hae(unsigned long new_hae)
#
extra-y := head.o vmlinux.lds
-EXTRA_AFLAGS := $(KBUILD_CFLAGS)
-EXTRA_CFLAGS := -Werror -Wno-sign-compare
+asflags-y := $(KBUILD_CFLAGS)
+ccflags-y := -Werror -Wno-sign-compare
obj-y := entry.o traps.o process.o init_task.o osf_sys.o irq.o \
irq_alpha.o signal.o setup.o ptrace.o time.o \
int irq_select_affinity(unsigned int irq)
{
+ struct irq_desc *desc = irq_to_desc[irq];
static int last_cpu;
int cpu = last_cpu + 1;
- if (!irq_desc[irq].chip->set_affinity || irq_user_affinity[irq])
+ if (!desc || !get_irq_desc_chip(desc)->set_affinity || irq_user_affinity[irq])
return 1;
while (!cpu_possible(cpu) ||
cpu = (cpu < (NR_CPUS-1) ? cpu + 1 : 0);
last_cpu = cpu;
- cpumask_copy(irq_desc[irq].affinity, cpumask_of(cpu));
- irq_desc[irq].chip->set_affinity(irq, cpumask_of(cpu));
+ cpumask_copy(desc->affinity, cpumask_of(cpu));
+ get_irq_desc_chip(desc)->set_affinity(irq, cpumask_of(cpu));
return 0;
}
#endif /* CONFIG_SMP */
int j;
int irq = *(loff_t *) v;
struct irqaction * action;
+ struct irq_desc *desc;
unsigned long flags;
#ifdef CONFIG_SMP
#endif
if (irq < ACTUAL_NR_IRQS) {
- raw_spin_lock_irqsave(&irq_desc[irq].lock, flags);
- action = irq_desc[irq].action;
+ desc = irq_to_desc(irq);
+
+ if (!desc)
+ return 0;
+
+ raw_spin_lock_irqsave(&desc->lock, flags);
+ action = desc->action;
if (!action)
goto unlock;
seq_printf(p, "%3d: ", irq);
for_each_online_cpu(j)
seq_printf(p, "%10u ", kstat_irqs_cpu(irq, j));
#endif
- seq_printf(p, " %14s", irq_desc[irq].chip->name);
+ seq_printf(p, " %14s", get_irq_desc_chip(desc)->name);
seq_printf(p, " %c%s",
(action->flags & IRQF_DISABLED)?'+':' ',
action->name);
seq_putc(p, '\n');
unlock:
- raw_spin_unlock_irqrestore(&irq_desc[irq].lock, flags);
+ raw_spin_unlock_irqrestore(&desc->lock, flags);
} else if (irq == ACTUAL_NR_IRQS) {
#ifdef CONFIG_SMP
seq_puts(p, "IPI: ");
* handled by some other CPU. (or is disabled)
*/
static unsigned int illegal_count=0;
+ struct irq_desc *desc = irq_to_desc(irq);
- if ((unsigned) irq > ACTUAL_NR_IRQS && illegal_count < MAX_ILLEGAL_IRQS ) {
+ if (!desc || ((unsigned) irq > ACTUAL_NR_IRQS &&
+ illegal_count < MAX_ILLEGAL_IRQS)) {
irq_err_count++;
illegal_count++;
printk(KERN_CRIT "device_interrupt: invalid interrupt %d\n",
return;
}
- irq_enter();
/*
- * __do_IRQ() must be called with IPL_MAX. Note that we do not
+ * From here we must proceed with IPL_MAX. Note that we do not
* explicitly enable interrupts afterwards - some MILO PALcode
* (namely LX164 one) seems to have severe problems with RTI
* at IPL 0.
*/
local_irq_disable();
- __do_IRQ(irq);
+ irq_enter();
+ generic_handle_irq_desc(irq, desc);
irq_exit();
}
* processed by PALcode, and comes in via entInt vector 1.
*/
-static void rtc_enable_disable(unsigned int irq) { }
-static unsigned int rtc_startup(unsigned int irq) { return 0; }
-
struct irqaction timer_irqaction = {
.handler = timer_interrupt,
.flags = IRQF_DISABLED,
.name = "timer",
};
-static struct irq_chip rtc_irq_type = {
- .name = "RTC",
- .startup = rtc_startup,
- .shutdown = rtc_enable_disable,
- .enable = rtc_enable_disable,
- .disable = rtc_enable_disable,
- .ack = rtc_enable_disable,
- .end = rtc_enable_disable,
-};
-
void __init
init_rtc_irq(void)
{
- irq_desc[RTC_IRQ].status = IRQ_DISABLED;
- irq_desc[RTC_IRQ].chip = &rtc_irq_type;
- setup_irq(RTC_IRQ, &timer_irqaction);
+ struct irq_desc *desc = irq_to_desc(RTC_IRQ);
+
+ if (desc) {
+ desc->status |= IRQ_DISABLED;
+ set_irq_chip_and_handler_name(RTC_IRQ, &no_irq_chip,
+ handle_simple_irq, "RTC");
+ setup_irq(RTC_IRQ, &timer_irqaction);
+ }
}
/* Dummy irqactions. */
spin_unlock(&i8259_irq_lock);
}
-unsigned int
-i8259a_startup_irq(unsigned int irq)
-{
- i8259a_enable_irq(irq);
- return 0; /* never anything pending */
-}
-
-void
-i8259a_end_irq(unsigned int irq)
-{
- if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
- i8259a_enable_irq(irq);
-}
-
struct irq_chip i8259a_irq_type = {
.name = "XT-PIC",
- .startup = i8259a_startup_irq,
- .shutdown = i8259a_disable_irq,
- .enable = i8259a_enable_irq,
- .disable = i8259a_disable_irq,
- .ack = i8259a_mask_and_ack_irq,
- .end = i8259a_end_irq,
+ .unmask = i8259a_enable_irq,
+ .mask = i8259a_disable_irq,
+ .mask_ack = i8259a_mask_and_ack_irq,
};
void __init
outb(0xff, 0xA1); /* mask all of 8259A-2 */
for (i = 0; i < 16; i++) {
- irq_desc[i].status = IRQ_DISABLED;
- irq_desc[i].chip = &i8259a_irq_type;
+ set_irq_chip_and_handler(i, &i8259a_irq_type, handle_level_irq);
}
setup_irq(2, &cascade);
pyxis_update_irq_hw(cached_irq_mask &= ~(1UL << (irq - 16)));
}
-static unsigned int
-pyxis_startup_irq(unsigned int irq)
-{
- pyxis_enable_irq(irq);
- return 0;
-}
-
-static void
-pyxis_end_irq(unsigned int irq)
-{
- if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
- pyxis_enable_irq(irq);
-}
-
static void
pyxis_mask_and_ack_irq(unsigned int irq)
{
static struct irq_chip pyxis_irq_type = {
.name = "PYXIS",
- .startup = pyxis_startup_irq,
- .shutdown = pyxis_disable_irq,
- .enable = pyxis_enable_irq,
- .disable = pyxis_disable_irq,
- .ack = pyxis_mask_and_ack_irq,
- .end = pyxis_end_irq,
+ .mask_ack = pyxis_mask_and_ack_irq,
+ .mask = pyxis_disable_irq,
+ .unmask = pyxis_enable_irq,
};
void
for (i = 16; i < 48; ++i) {
if ((ignore_mask >> i) & 1)
continue;
- irq_desc[i].status = IRQ_DISABLED | IRQ_LEVEL;
- irq_desc[i].chip = &pyxis_irq_type;
+ set_irq_chip_and_handler(i, &pyxis_irq_type, handle_level_irq);
+ irq_to_desc(i)->status |= IRQ_LEVEL;
}
setup_irq(16+7, &isa_cascade_irqaction);
spin_unlock(&srm_irq_lock);
}
-static unsigned int
-srm_startup_irq(unsigned int irq)
-{
- srm_enable_irq(irq);
- return 0;
-}
-
-static void
-srm_end_irq(unsigned int irq)
-{
- if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
- srm_enable_irq(irq);
-}
-
/* Handle interrupts from the SRM, assuming no additional weirdness. */
static struct irq_chip srm_irq_type = {
.name = "SRM",
- .startup = srm_startup_irq,
- .shutdown = srm_disable_irq,
- .enable = srm_enable_irq,
- .disable = srm_disable_irq,
- .ack = srm_disable_irq,
- .end = srm_end_irq,
+ .unmask = srm_enable_irq,
+ .mask = srm_disable_irq,
+ .mask_ack = srm_disable_irq,
};
void __init
for (i = 16; i < max; ++i) {
if (i < 64 && ((ignore_mask >> i) & 1))
continue;
- irq_desc[i].status = IRQ_DISABLED | IRQ_LEVEL;
- irq_desc[i].chip = &srm_irq_type;
+ set_irq_chip_and_handler(i, &srm_irq_type, handle_level_irq);
+ irq_to_desc(i)->status |= IRQ_LEVEL;
}
}
return do_utimes(AT_FDCWD, filename, tvs ? tv : NULL, 0);
}
-#define MAX_SELECT_SECONDS \
- ((unsigned long) (MAX_SCHEDULE_TIMEOUT / HZ)-1)
-
SYSCALL_DEFINE5(osf_select, int, n, fd_set __user *, inp, fd_set __user *, outp,
fd_set __user *, exp, struct timeval32 __user *, tvp)
{
*(vuip)GRU_INT_CLEAR = 0; mb();
}
-static unsigned int
-alcor_startup_irq(unsigned int irq)
-{
- alcor_enable_irq(irq);
- return 0;
-}
-
static void
alcor_isa_mask_and_ack_irq(unsigned int irq)
{
*(vuip)GRU_INT_CLEAR = 0; mb();
}
-static void
-alcor_end_irq(unsigned int irq)
-{
- if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
- alcor_enable_irq(irq);
-}
-
static struct irq_chip alcor_irq_type = {
.name = "ALCOR",
- .startup = alcor_startup_irq,
- .shutdown = alcor_disable_irq,
- .enable = alcor_enable_irq,
- .disable = alcor_disable_irq,
- .ack = alcor_mask_and_ack_irq,
- .end = alcor_end_irq,
+ .unmask = alcor_enable_irq,
+ .mask = alcor_disable_irq,
+ .mask_ack = alcor_mask_and_ack_irq,
};
static void
on while IRQ probing. */
if (i >= 16+20 && i <= 16+30)
continue;
- irq_desc[i].status = IRQ_DISABLED | IRQ_LEVEL;
- irq_desc[i].chip = &alcor_irq_type;
+ set_irq_chip_and_handler(i, &alcor_irq_type, handle_level_irq);
+ irq_to_desc(i)->status |= IRQ_LEVEL;
}
i8259a_irq_type.ack = alcor_isa_mask_and_ack_irq;
cabriolet_update_irq_hw(irq, cached_irq_mask |= 1UL << irq);
}
-static unsigned int
-cabriolet_startup_irq(unsigned int irq)
-{
- cabriolet_enable_irq(irq);
- return 0; /* never anything pending */
-}
-
-static void
-cabriolet_end_irq(unsigned int irq)
-{
- if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
- cabriolet_enable_irq(irq);
-}
-
static struct irq_chip cabriolet_irq_type = {
.name = "CABRIOLET",
- .startup = cabriolet_startup_irq,
- .shutdown = cabriolet_disable_irq,
- .enable = cabriolet_enable_irq,
- .disable = cabriolet_disable_irq,
- .ack = cabriolet_disable_irq,
- .end = cabriolet_end_irq,
+ .unmask = cabriolet_enable_irq,
+ .mask = cabriolet_disable_irq,
+ .mask_ack = cabriolet_disable_irq,
};
static void
outb(0xff, 0x806);
for (i = 16; i < 35; ++i) {
- irq_desc[i].status = IRQ_DISABLED | IRQ_LEVEL;
- irq_desc[i].chip = &cabriolet_irq_type;
+ set_irq_chip_and_handler(i, &cabriolet_irq_type,
+ handle_level_irq);
+ irq_to_desc(i)->status |= IRQ_LEVEL;
}
}
spin_unlock(&dp264_irq_lock);
}
-static unsigned int
-dp264_startup_irq(unsigned int irq)
-{
- dp264_enable_irq(irq);
- return 0; /* never anything pending */
-}
-
-static void
-dp264_end_irq(unsigned int irq)
-{
- if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
- dp264_enable_irq(irq);
-}
-
static void
clipper_enable_irq(unsigned int irq)
{
spin_unlock(&dp264_irq_lock);
}
-static unsigned int
-clipper_startup_irq(unsigned int irq)
-{
- clipper_enable_irq(irq);
- return 0; /* never anything pending */
-}
-
-static void
-clipper_end_irq(unsigned int irq)
-{
- if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
- clipper_enable_irq(irq);
-}
-
static void
cpu_set_irq_affinity(unsigned int irq, cpumask_t affinity)
{
static struct irq_chip dp264_irq_type = {
.name = "DP264",
- .startup = dp264_startup_irq,
- .shutdown = dp264_disable_irq,
- .enable = dp264_enable_irq,
- .disable = dp264_disable_irq,
- .ack = dp264_disable_irq,
- .end = dp264_end_irq,
+ .unmask = dp264_enable_irq,
+ .mask = dp264_disable_irq,
+ .mask_ack = dp264_disable_irq,
.set_affinity = dp264_set_affinity,
};
static struct irq_chip clipper_irq_type = {
.name = "CLIPPER",
- .startup = clipper_startup_irq,
- .shutdown = clipper_disable_irq,
- .enable = clipper_enable_irq,
- .disable = clipper_disable_irq,
- .ack = clipper_disable_irq,
- .end = clipper_end_irq,
+ .unmask = clipper_enable_irq,
+ .mask = clipper_disable_irq,
+ .mask_ack = clipper_disable_irq,
.set_affinity = clipper_set_affinity,
};
{
long i;
for (i = imin; i <= imax; ++i) {
- irq_desc[i].status = IRQ_DISABLED | IRQ_LEVEL;
- irq_desc[i].chip = ops;
+ irq_to_desc(i)->status |= IRQ_LEVEL;
+ set_irq_chip_and_handler(i, ops, handle_level_irq);
}
}
eb64p_update_irq_hw(irq, cached_irq_mask |= 1 << irq);
}
-static unsigned int
-eb64p_startup_irq(unsigned int irq)
-{
- eb64p_enable_irq(irq);
- return 0; /* never anything pending */
-}
-
-static void
-eb64p_end_irq(unsigned int irq)
-{
- if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
- eb64p_enable_irq(irq);
-}
-
static struct irq_chip eb64p_irq_type = {
.name = "EB64P",
- .startup = eb64p_startup_irq,
- .shutdown = eb64p_disable_irq,
- .enable = eb64p_enable_irq,
- .disable = eb64p_disable_irq,
- .ack = eb64p_disable_irq,
- .end = eb64p_end_irq,
+ .unmask = eb64p_enable_irq,
+ .mask = eb64p_disable_irq,
+ .mask_ack = eb64p_disable_irq,
};
static void
init_i8259a_irqs();
for (i = 16; i < 32; ++i) {
- irq_desc[i].status = IRQ_DISABLED | IRQ_LEVEL;
- irq_desc[i].chip = &eb64p_irq_type;
+ irq_to_desc(i)->status |= IRQ_LEVEL;
+ set_irq_chip_and_handler(i, &eb64p_irq_type, handle_level_irq);
}
common_init_isa_dma();
eiger_update_irq_hw(irq, mask);
}
-static unsigned int
-eiger_startup_irq(unsigned int irq)
-{
- eiger_enable_irq(irq);
- return 0; /* never anything pending */
-}
-
-static void
-eiger_end_irq(unsigned int irq)
-{
- if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
- eiger_enable_irq(irq);
-}
-
static struct irq_chip eiger_irq_type = {
.name = "EIGER",
- .startup = eiger_startup_irq,
- .shutdown = eiger_disable_irq,
- .enable = eiger_enable_irq,
- .disable = eiger_disable_irq,
- .ack = eiger_disable_irq,
- .end = eiger_end_irq,
+ .unmask = eiger_enable_irq,
+ .mask = eiger_disable_irq,
+ .mask_ack = eiger_disable_irq,
};
static void
init_i8259a_irqs();
for (i = 16; i < 128; ++i) {
- irq_desc[i].status = IRQ_DISABLED | IRQ_LEVEL;
- irq_desc[i].chip = &eiger_irq_type;
+ irq_to_desc(i)->status |= IRQ_LEVEL;
+ set_irq_chip_and_handler(i, &eiger_irq_type, handle_level_irq);
}
}
* world.
*/
-static unsigned int
-jensen_local_startup(unsigned int irq)
-{
- /* the parport is really hw IRQ 1, silly Jensen. */
- if (irq == 7)
- i8259a_startup_irq(1);
- else
- /*
- * For all true local interrupts, set the flag that prevents
- * the IPL from being dropped during handler processing.
- */
- if (irq_desc[irq].action)
- irq_desc[irq].action->flags |= IRQF_DISABLED;
- return 0;
-}
-
-static void
-jensen_local_shutdown(unsigned int irq)
-{
- /* the parport is really hw IRQ 1, silly Jensen. */
- if (irq == 7)
- i8259a_disable_irq(1);
-}
-
static void
jensen_local_enable(unsigned int irq)
{
}
static void
-jensen_local_ack(unsigned int irq)
+jensen_local_mask_ack(unsigned int irq)
{
/* the parport is really hw IRQ 1, silly Jensen. */
if (irq == 7)
i8259a_mask_and_ack_irq(1);
}
-static void
-jensen_local_end(unsigned int irq)
-{
- /* the parport is really hw IRQ 1, silly Jensen. */
- if (irq == 7)
- i8259a_end_irq(1);
-}
-
static struct irq_chip jensen_local_irq_type = {
.name = "LOCAL",
- .startup = jensen_local_startup,
- .shutdown = jensen_local_shutdown,
- .enable = jensen_local_enable,
- .disable = jensen_local_disable,
- .ack = jensen_local_ack,
- .end = jensen_local_end,
+ .unmask = jensen_local_enable,
+ .mask = jensen_local_disable,
+ .mask_ack = jensen_local_mask_ack,
};
static void
}
/* If there is no handler yet... */
- if (irq_desc[irq].action == NULL) {
+ if (!irq_has_action(irq)) {
/* If it is a local interrupt that cannot be masked... */
if (vector >= 0x900)
{
{
init_i8259a_irqs();
- irq_desc[1].chip = &jensen_local_irq_type;
- irq_desc[4].chip = &jensen_local_irq_type;
- irq_desc[3].chip = &jensen_local_irq_type;
- irq_desc[7].chip = &jensen_local_irq_type;
- irq_desc[9].chip = &jensen_local_irq_type;
+ set_irq_chip_and_handler(1, &jensen_local_irq_type, handle_level_irq);
+ set_irq_chip_and_handler(4, &jensen_local_irq_type, handle_level_irq);
+ set_irq_chip_and_handler(3, &jensen_local_irq_type, handle_level_irq);
+ set_irq_chip_and_handler(7, &jensen_local_irq_type, handle_level_irq);
+ set_irq_chip_and_handler(9, &jensen_local_irq_type, handle_level_irq);
common_init_isa_dma();
}
spin_unlock(&io7->irq_lock);
}
-static unsigned int
-io7_startup_irq(unsigned int irq)
-{
- io7_enable_irq(irq);
- return 0; /* never anything pending */
-}
-
-static void
-io7_end_irq(unsigned int irq)
-{
- if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
- io7_enable_irq(irq);
-}
-
static void
marvel_irq_noop(unsigned int irq)
{
static struct irq_chip marvel_legacy_irq_type = {
.name = "LEGACY",
- .startup = marvel_irq_noop_return,
- .shutdown = marvel_irq_noop,
- .enable = marvel_irq_noop,
- .disable = marvel_irq_noop,
- .ack = marvel_irq_noop,
- .end = marvel_irq_noop,
+ .mask = marvel_irq_noop,
+ .unmask = marvel_irq_noop,
};
static struct irq_chip io7_lsi_irq_type = {
.name = "LSI",
- .startup = io7_startup_irq,
- .shutdown = io7_disable_irq,
- .enable = io7_enable_irq,
- .disable = io7_disable_irq,
- .ack = io7_disable_irq,
- .end = io7_end_irq,
+ .unmask = io7_enable_irq,
+ .mask = io7_disable_irq,
+ .mask_ack = io7_disable_irq,
};
static struct irq_chip io7_msi_irq_type = {
.name = "MSI",
- .startup = io7_startup_irq,
- .shutdown = io7_disable_irq,
- .enable = io7_enable_irq,
- .disable = io7_disable_irq,
+ .unmask = io7_enable_irq,
+ .mask = io7_disable_irq,
.ack = marvel_irq_noop,
- .end = io7_end_irq,
};
static void
/* Set up the lsi irqs. */
for (i = 0; i < 128; ++i) {
- irq_desc[base + i].status = IRQ_DISABLED | IRQ_LEVEL;
- irq_desc[base + i].chip = lsi_ops;
+ irq_to_desc(base + i)->status |= IRQ_LEVEL;
+ set_irq_chip_and_handler(base + i, lsi_ops, handle_level_irq);
}
/* Disable the implemented irqs in hardware. */
/* Set up the msi irqs. */
for (i = 128; i < (128 + 512); ++i) {
- irq_desc[base + i].status = IRQ_DISABLED | IRQ_LEVEL;
- irq_desc[base + i].chip = msi_ops;
+ irq_to_desc(base + i)->status |= IRQ_LEVEL;
+ set_irq_chip_and_handler(base + i, msi_ops, handle_level_irq);
}
for (i = 0; i < 16; ++i)
/* Reserve the legacy irqs. */
for (i = 0; i < 16; ++i) {
- irq_desc[i].status = IRQ_DISABLED;
- irq_desc[i].chip = &marvel_legacy_irq_type;
+ set_irq_chip_and_handler(i, &marvel_legacy_irq_type,
+ handle_level_irq);
}
/* Init the io7 irqs. */
mikasa_update_irq_hw(cached_irq_mask &= ~(1 << (irq - 16)));
}
-static unsigned int
-mikasa_startup_irq(unsigned int irq)
-{
- mikasa_enable_irq(irq);
- return 0;
-}
-
-static void
-mikasa_end_irq(unsigned int irq)
-{
- if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
- mikasa_enable_irq(irq);
-}
-
static struct irq_chip mikasa_irq_type = {
.name = "MIKASA",
- .startup = mikasa_startup_irq,
- .shutdown = mikasa_disable_irq,
- .enable = mikasa_enable_irq,
- .disable = mikasa_disable_irq,
- .ack = mikasa_disable_irq,
- .end = mikasa_end_irq,
+ .unmask = mikasa_enable_irq,
+ .mask = mikasa_disable_irq,
+ .mask_ack = mikasa_disable_irq,
};
static void
mikasa_update_irq_hw(0);
for (i = 16; i < 32; ++i) {
- irq_desc[i].status = IRQ_DISABLED | IRQ_LEVEL;
- irq_desc[i].chip = &mikasa_irq_type;
+ irq_to_desc(i)->status |= IRQ_LEVEL;
+ set_irq_chip_and_handler(i, &mikasa_irq_type, handle_level_irq);
}
init_i8259a_irqs();
noritake_update_irq_hw(irq, cached_irq_mask &= ~(1 << (irq - 16)));
}
-static unsigned int
-noritake_startup_irq(unsigned int irq)
-{
- noritake_enable_irq(irq);
- return 0;
-}
-
-static void
-noritake_end_irq(unsigned int irq)
-{
- if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
- noritake_enable_irq(irq);
-}
-
static struct irq_chip noritake_irq_type = {
.name = "NORITAKE",
- .startup = noritake_startup_irq,
- .shutdown = noritake_disable_irq,
- .enable = noritake_enable_irq,
- .disable = noritake_disable_irq,
- .ack = noritake_disable_irq,
- .end = noritake_end_irq,
+ .unmask = noritake_enable_irq,
+ .mask = noritake_disable_irq,
+ .mask_ack = noritake_disable_irq,
};
static void
outw(0, 0x54c);
for (i = 16; i < 48; ++i) {
- irq_desc[i].status = IRQ_DISABLED | IRQ_LEVEL;
- irq_desc[i].chip = &noritake_irq_type;
+ irq_to_desc(i)->status |= IRQ_LEVEL;
+ set_irq_chip_and_handler(i, &noritake_irq_type, handle_level_irq);
}
init_i8259a_irqs();
spin_unlock(&rawhide_irq_lock);
}
-static unsigned int
-rawhide_startup_irq(unsigned int irq)
-{
- rawhide_enable_irq(irq);
- return 0;
-}
-
-static void
-rawhide_end_irq(unsigned int irq)
-{
- if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
- rawhide_enable_irq(irq);
-}
-
static struct irq_chip rawhide_irq_type = {
.name = "RAWHIDE",
- .startup = rawhide_startup_irq,
- .shutdown = rawhide_disable_irq,
- .enable = rawhide_enable_irq,
- .disable = rawhide_disable_irq,
- .ack = rawhide_mask_and_ack_irq,
- .end = rawhide_end_irq,
+ .unmask = rawhide_enable_irq,
+ .mask = rawhide_disable_irq,
+ .mask_ack = rawhide_mask_and_ack_irq,
};
static void
}
for (i = 16; i < 128; ++i) {
- irq_desc[i].status = IRQ_DISABLED | IRQ_LEVEL;
- irq_desc[i].chip = &rawhide_irq_type;
+ irq_to_desc(i)->status |= IRQ_LEVEL;
+ set_irq_chip_and_handler(i, &rawhide_irq_type, handle_level_irq);
}
init_i8259a_irqs();
rx164_update_irq_hw(cached_irq_mask &= ~(1UL << (irq - 16)));
}
-static unsigned int
-rx164_startup_irq(unsigned int irq)
-{
- rx164_enable_irq(irq);
- return 0;
-}
-
-static void
-rx164_end_irq(unsigned int irq)
-{
- if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
- rx164_enable_irq(irq);
-}
-
static struct irq_chip rx164_irq_type = {
.name = "RX164",
- .startup = rx164_startup_irq,
- .shutdown = rx164_disable_irq,
- .enable = rx164_enable_irq,
- .disable = rx164_disable_irq,
- .ack = rx164_disable_irq,
- .end = rx164_end_irq,
+ .unmask = rx164_enable_irq,
+ .mask = rx164_disable_irq,
+ .mask_ack = rx164_disable_irq,
};
static void
rx164_update_irq_hw(0);
for (i = 16; i < 40; ++i) {
- irq_desc[i].status = IRQ_DISABLED | IRQ_LEVEL;
- irq_desc[i].chip = &rx164_irq_type;
+ irq_to_desc(i)->status |= IRQ_LEVEL;
+ set_irq_chip_and_handler(i, &rx164_irq_type, handle_level_irq);
}
init_i8259a_irqs();
#endif
}
-static unsigned int
-sable_lynx_startup_irq(unsigned int irq)
-{
- sable_lynx_enable_irq(irq);
- return 0;
-}
-
-static void
-sable_lynx_end_irq(unsigned int irq)
-{
- if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
- sable_lynx_enable_irq(irq);
-}
-
static void
sable_lynx_mask_and_ack_irq(unsigned int irq)
{
static struct irq_chip sable_lynx_irq_type = {
.name = "SABLE/LYNX",
- .startup = sable_lynx_startup_irq,
- .shutdown = sable_lynx_disable_irq,
- .enable = sable_lynx_enable_irq,
- .disable = sable_lynx_disable_irq,
- .ack = sable_lynx_mask_and_ack_irq,
- .end = sable_lynx_end_irq,
+ .unmask = sable_lynx_enable_irq,
+ .mask = sable_lynx_disable_irq,
+ .mask_ack = sable_lynx_mask_and_ack_irq,
};
static void
long i;
for (i = 0; i < nr_of_irqs; ++i) {
- irq_desc[i].status = IRQ_DISABLED | IRQ_LEVEL;
- irq_desc[i].chip = &sable_lynx_irq_type;
+ irq_to_desc(i)->status |= IRQ_LEVEL;
+ set_irq_chip_and_handler(i, &sable_lynx_irq_type,
+ handle_level_irq);
}
common_init_isa_dma();
takara_update_irq_hw(irq, mask);
}
-static unsigned int
-takara_startup_irq(unsigned int irq)
-{
- takara_enable_irq(irq);
- return 0; /* never anything pending */
-}
-
-static void
-takara_end_irq(unsigned int irq)
-{
- if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
- takara_enable_irq(irq);
-}
-
static struct irq_chip takara_irq_type = {
.name = "TAKARA",
- .startup = takara_startup_irq,
- .shutdown = takara_disable_irq,
- .enable = takara_enable_irq,
- .disable = takara_disable_irq,
- .ack = takara_disable_irq,
- .end = takara_end_irq,
+ .unmask = takara_enable_irq,
+ .mask = takara_disable_irq,
+ .mask_ack = takara_disable_irq,
};
static void
takara_update_irq_hw(i, -1);
for (i = 16; i < 128; ++i) {
- irq_desc[i].status = IRQ_DISABLED | IRQ_LEVEL;
- irq_desc[i].chip = &takara_irq_type;
+ irq_to_desc(i)->status |= IRQ_LEVEL;
+ set_irq_chip_and_handler(i, &takara_irq_type, handle_level_irq);
}
common_init_isa_dma();
spin_unlock(&titan_irq_lock);
}
-static unsigned int
-titan_startup_irq(unsigned int irq)
-{
- titan_enable_irq(irq);
- return 0; /* never anything pending */
-}
-
-static void
-titan_end_irq(unsigned int irq)
-{
- if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
- titan_enable_irq(irq);
-}
-
static void
titan_cpu_set_irq_affinity(unsigned int irq, cpumask_t affinity)
{
{
long i;
for (i = imin; i <= imax; ++i) {
- irq_desc[i].status = IRQ_DISABLED | IRQ_LEVEL;
- irq_desc[i].chip = ops;
+ irq_to_desc(i)->status |= IRQ_LEVEL;
+ set_irq_chip_and_handler(i, ops, handle_level_irq);
}
}
static struct irq_chip titan_irq_type = {
- .name = "TITAN",
- .startup = titan_startup_irq,
- .shutdown = titan_disable_irq,
- .enable = titan_enable_irq,
- .disable = titan_disable_irq,
- .ack = titan_disable_irq,
- .end = titan_end_irq,
- .set_affinity = titan_set_irq_affinity,
+ .name = "TITAN",
+ .unmask = titan_enable_irq,
+ .mask = titan_disable_irq,
+ .mask_ack = titan_disable_irq,
+ .set_affinity = titan_set_irq_affinity,
};
static irqreturn_t
spin_unlock(&wildfire_irq_lock);
}
-static unsigned int
-wildfire_startup_irq(unsigned int irq)
-{
- wildfire_enable_irq(irq);
- return 0; /* never anything pending */
-}
-
-static void
-wildfire_end_irq(unsigned int irq)
-{
-#if 0
- if (!irq_desc[irq].action)
- printk("got irq %d\n", irq);
-#endif
- if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
- wildfire_enable_irq(irq);
-}
-
static struct irq_chip wildfire_irq_type = {
.name = "WILDFIRE",
- .startup = wildfire_startup_irq,
- .shutdown = wildfire_disable_irq,
- .enable = wildfire_enable_irq,
- .disable = wildfire_disable_irq,
- .ack = wildfire_mask_and_ack_irq,
- .end = wildfire_end_irq,
+ .unmask = wildfire_enable_irq,
+ .mask = wildfire_disable_irq,
+ .mask_ack = wildfire_mask_and_ack_irq,
};
static void __init
for (i = 0; i < 16; ++i) {
if (i == 2)
continue;
- irq_desc[i+irq_bias].status = IRQ_DISABLED | IRQ_LEVEL;
- irq_desc[i+irq_bias].chip = &wildfire_irq_type;
+ irq_to_desc(i+irq_bias)->status |= IRQ_LEVEL;
+ set_irq_chip_and_handler(i+irq_bias, &wildfire_irq_type,
+ handle_level_irq);
}
- irq_desc[36+irq_bias].status = IRQ_DISABLED | IRQ_LEVEL;
- irq_desc[36+irq_bias].chip = &wildfire_irq_type;
+ irq_to_desc(36+irq_bias)->status |= IRQ_LEVEL;
+ set_irq_chip_and_handler(36+irq_bias, &wildfire_irq_type,
+ handle_level_irq);
for (i = 40; i < 64; ++i) {
- irq_desc[i+irq_bias].status = IRQ_DISABLED | IRQ_LEVEL;
- irq_desc[i+irq_bias].chip = &wildfire_irq_type;
+ irq_to_desc(i+irq_bias)->status |= IRQ_LEVEL;
+ set_irq_chip_and_handler(i+irq_bias, &wildfire_irq_type,
+ handle_level_irq);
}
setup_irq(32+irq_bias, &isa_enable);
# Makefile for alpha-specific library files..
#
-EXTRA_AFLAGS := $(KBUILD_CFLAGS)
-EXTRA_CFLAGS := -Werror
+asflags-y := $(KBUILD_CFLAGS)
+ccflags-y := -Werror
# Many of these routines have implementations tuned for ev6.
# Choose them iff we're targeting ev6 specifically.
# Makefile for the FPU instruction emulation.
#
-EXTRA_CFLAGS := -w
+ccflags-y := -w
obj-$(CONFIG_MATHEMU) += math-emu.o
# Makefile for the linux alpha-specific parts of the memory manager.
#
-EXTRA_CFLAGS := -Werror
+ccflags-y := -Werror
obj-y := init.o fault.o extable.o
-EXTRA_CFLAGS := -Werror -Wno-sign-compare
+ccflags-y := -Werror -Wno-sign-compare
obj-$(CONFIG_OPROFILE) += oprofile.o
#include <linux/workqueue.h>
#include <linux/interrupt.h>
+/*
+ * Maxium size for a single dma descriptor
+ * Size is limited to 16 bits.
+ * Size is in the units of addr-widths (1,2,4,8 bytes)
+ * Larger transfers will be split up to multiple linked desc
+ */
+#define STEDMA40_MAX_SEG_SIZE 0xFFFF
+
/* dev types for memcpy */
#define STEDMA40_DEV_DST_MEMORY (-1)
#define STEDMA40_DEV_SRC_MEMORY (-1)
platform_data for a dma-pl330 device.
config PCH_DMA
- tristate "Topcliff (Intel EG20T) PCH DMA support"
+ tristate "Intel EG20T PCH / OKI SEMICONDUCTOR ML7213 IOH DMA support"
depends on PCI && X86
select DMA_ENGINE
help
- Enable support for the Topcliff (Intel EG20T) PCH DMA engine.
+ Enable support for Intel EG20T PCH DMA engine.
+
+ This driver also can be used for OKI SEMICONDUCTOR ML7213 IOH(Input/
+ Output Hub) which is for IVI(In-Vehicle Infotainment) use.
+ ML7213 is companion chip for Intel Atom E6xx series.
+ ML7213 is completely compatible for Intel EG20T PCH.
config IMX_SDMA
tristate "i.MX SDMA support"
* this program; if not, write to the Free Software Foundation, Inc., 59
* Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
- * The full GNU General Public License is iin this distribution in the
- * file called COPYING.
+ * The full GNU General Public License is in this distribution in the file
+ * called COPYING.
*
* Documentation: ARM DDI 0196G == PL080
- * Documentation: ARM DDI 0218E == PL081
+ * Documentation: ARM DDI 0218E == PL081
*
- * PL080 & PL081 both have 16 sets of DMA signals that can be routed to
- * any channel.
+ * PL080 & PL081 both have 16 sets of DMA signals that can be routed to any
+ * channel.
*
* The PL080 has 8 channels available for simultaneous use, and the PL081
* has only two channels. So on these DMA controllers the number of channels
*
* ASSUMES default (little) endianness for DMA transfers
*
- * Only DMAC flow control is implemented
+ * The PL08x has two flow control settings:
+ * - DMAC flow control: the transfer size defines the number of transfers
+ * which occur for the current LLI entry, and the DMAC raises TC at the
+ * end of every LLI entry. Observed behaviour shows the DMAC listening
+ * to both the BREQ and SREQ signals (contrary to documented),
+ * transferring data if either is active. The LBREQ and LSREQ signals
+ * are ignored.
+ *
+ * - Peripheral flow control: the transfer size is ignored (and should be
+ * zero). The data is transferred from the current LLI entry, until
+ * after the final transfer signalled by LBREQ or LSREQ. The DMAC
+ * will then move to the next LLI entry.
+ *
+ * Only the former works sanely with scatter lists, so we only implement
+ * the DMAC flow control method. However, peripherals which use the LBREQ
+ * and LSREQ signals (eg, MMCI) are unable to use this mode, which through
+ * these hardware restrictions prevents them from using scatter DMA.
*
* Global TODO:
* - Break out common code from arch/arm/mach-s3c64xx and share
#include <linux/device.h>
#include <linux/init.h>
#include <linux/module.h>
-#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/slab.h>
#include <linux/dmapool.h>
-#include <linux/amba/bus.h>
#include <linux/dmaengine.h>
+#include <linux/amba/bus.h>
#include <linux/amba/pl08x.h>
#include <linux/debugfs.h>
#include <linux/seq_file.h>
#include <asm/hardware/pl080.h>
-#include <asm/dma.h>
-#include <asm/mach/dma.h>
-#include <asm/atomic.h>
-#include <asm/processor.h>
-#include <asm/cacheflush.h>
#define DRIVER_NAME "pl08xdmac"
/**
- * struct vendor_data - vendor-specific config parameters
- * for PL08x derivates
- * @name: the name of this specific variant
+ * struct vendor_data - vendor-specific config parameters for PL08x derivatives
* @channels: the number of channels available in this variant
- * @dualmaster: whether this version supports dual AHB masters
- * or not.
+ * @dualmaster: whether this version supports dual AHB masters or not.
*/
struct vendor_data {
- char *name;
u8 channels;
bool dualmaster;
};
/*
* PL08X private data structures
- * An LLI struct - see pl08x TRM
- * Note that next uses bit[0] as a bus bit,
- * start & end do not - their bus bit info
- * is in cctl
+ * An LLI struct - see PL08x TRM. Note that next uses bit[0] as a bus bit,
+ * start & end do not - their bus bit info is in cctl. Also note that these
+ * are fixed 32-bit quantities.
*/
-struct lli {
- dma_addr_t src;
- dma_addr_t dst;
- dma_addr_t next;
+struct pl08x_lli {
+ u32 src;
+ u32 dst;
+ u32 lli;
u32 cctl;
};
* @phy_chans: array of data for the physical channels
* @pool: a pool for the LLI descriptors
* @pool_ctr: counter of LLIs in the pool
+ * @lli_buses: bitmask to or in to LLI pointer selecting AHB port for LLI fetches
+ * @mem_buses: set to indicate memory transfers on AHB2.
* @lock: a spinlock for this struct
*/
struct pl08x_driver_data {
struct dma_device memcpy;
void __iomem *base;
struct amba_device *adev;
- struct vendor_data *vd;
+ const struct vendor_data *vd;
struct pl08x_platform_data *pd;
struct pl08x_phy_chan *phy_chans;
struct dma_pool *pool;
int pool_ctr;
+ u8 lli_buses;
+ u8 mem_buses;
spinlock_t lock;
};
/* Size (bytes) of each LLI buffer allocated for one transfer */
# define PL08X_LLI_TSFR_SIZE 0x2000
-/* Maximimum times we call dma_pool_alloc on this pool without freeing */
+/* Maximum times we call dma_pool_alloc on this pool without freeing */
#define PL08X_MAX_ALLOCS 0x40
-#define MAX_NUM_TSFR_LLIS (PL08X_LLI_TSFR_SIZE/sizeof(struct lli))
+#define MAX_NUM_TSFR_LLIS (PL08X_LLI_TSFR_SIZE/sizeof(struct pl08x_lli))
#define PL08X_ALIGN 8
static inline struct pl08x_dma_chan *to_pl08x_chan(struct dma_chan *chan)
return container_of(chan, struct pl08x_dma_chan, chan);
}
+static inline struct pl08x_txd *to_pl08x_txd(struct dma_async_tx_descriptor *tx)
+{
+ return container_of(tx, struct pl08x_txd, tx);
+}
+
/*
* Physical channel handling
*/
/*
* Set the initial DMA register values i.e. those for the first LLI
- * The next lli pointer and the configuration interrupt bit have
- * been set when the LLIs were constructed
+ * The next LLI pointer and the configuration interrupt bit have
+ * been set when the LLIs were constructed. Poke them into the hardware
+ * and start the transfer.
*/
-static void pl08x_set_cregs(struct pl08x_driver_data *pl08x,
- struct pl08x_phy_chan *ch)
-{
- /* Wait for channel inactive */
- while (pl08x_phy_channel_busy(ch))
- ;
-
- dev_vdbg(&pl08x->adev->dev,
- "WRITE channel %d: csrc=%08x, cdst=%08x, "
- "cctl=%08x, clli=%08x, ccfg=%08x\n",
- ch->id,
- ch->csrc,
- ch->cdst,
- ch->cctl,
- ch->clli,
- ch->ccfg);
-
- writel(ch->csrc, ch->base + PL080_CH_SRC_ADDR);
- writel(ch->cdst, ch->base + PL080_CH_DST_ADDR);
- writel(ch->clli, ch->base + PL080_CH_LLI);
- writel(ch->cctl, ch->base + PL080_CH_CONTROL);
- writel(ch->ccfg, ch->base + PL080_CH_CONFIG);
-}
-
-static inline void pl08x_config_phychan_for_txd(struct pl08x_dma_chan *plchan)
+static void pl08x_start_txd(struct pl08x_dma_chan *plchan,
+ struct pl08x_txd *txd)
{
- struct pl08x_channel_data *cd = plchan->cd;
+ struct pl08x_driver_data *pl08x = plchan->host;
struct pl08x_phy_chan *phychan = plchan->phychan;
- struct pl08x_txd *txd = plchan->at;
-
- /* Copy the basic control register calculated at transfer config */
- phychan->csrc = txd->csrc;
- phychan->cdst = txd->cdst;
- phychan->clli = txd->clli;
- phychan->cctl = txd->cctl;
-
- /* Assign the signal to the proper control registers */
- phychan->ccfg = cd->ccfg;
- phychan->ccfg &= ~PL080_CONFIG_SRC_SEL_MASK;
- phychan->ccfg &= ~PL080_CONFIG_DST_SEL_MASK;
- /* If it wasn't set from AMBA, ignore it */
- if (txd->direction == DMA_TO_DEVICE)
- /* Select signal as destination */
- phychan->ccfg |=
- (phychan->signal << PL080_CONFIG_DST_SEL_SHIFT);
- else if (txd->direction == DMA_FROM_DEVICE)
- /* Select signal as source */
- phychan->ccfg |=
- (phychan->signal << PL080_CONFIG_SRC_SEL_SHIFT);
- /* Always enable error interrupts */
- phychan->ccfg |= PL080_CONFIG_ERR_IRQ_MASK;
- /* Always enable terminal interrupts */
- phychan->ccfg |= PL080_CONFIG_TC_IRQ_MASK;
-}
-
-/*
- * Enable the DMA channel
- * Assumes all other configuration bits have been set
- * as desired before this code is called
- */
-static void pl08x_enable_phy_chan(struct pl08x_driver_data *pl08x,
- struct pl08x_phy_chan *ch)
-{
+ struct pl08x_lli *lli = &txd->llis_va[0];
u32 val;
- /*
- * Do not access config register until channel shows as disabled
- */
- while (readl(pl08x->base + PL080_EN_CHAN) & (1 << ch->id))
- ;
+ plchan->at = txd;
- /*
- * Do not access config register until channel shows as inactive
- */
- val = readl(ch->base + PL080_CH_CONFIG);
+ /* Wait for channel inactive */
+ while (pl08x_phy_channel_busy(phychan))
+ cpu_relax();
+
+ dev_vdbg(&pl08x->adev->dev,
+ "WRITE channel %d: csrc=0x%08x, cdst=0x%08x, "
+ "clli=0x%08x, cctl=0x%08x, ccfg=0x%08x\n",
+ phychan->id, lli->src, lli->dst, lli->lli, lli->cctl,
+ txd->ccfg);
+
+ writel(lli->src, phychan->base + PL080_CH_SRC_ADDR);
+ writel(lli->dst, phychan->base + PL080_CH_DST_ADDR);
+ writel(lli->lli, phychan->base + PL080_CH_LLI);
+ writel(lli->cctl, phychan->base + PL080_CH_CONTROL);
+ writel(txd->ccfg, phychan->base + PL080_CH_CONFIG);
+
+ /* Enable the DMA channel */
+ /* Do not access config register until channel shows as disabled */
+ while (readl(pl08x->base + PL080_EN_CHAN) & (1 << phychan->id))
+ cpu_relax();
+
+ /* Do not access config register until channel shows as inactive */
+ val = readl(phychan->base + PL080_CH_CONFIG);
while ((val & PL080_CONFIG_ACTIVE) || (val & PL080_CONFIG_ENABLE))
- val = readl(ch->base + PL080_CH_CONFIG);
+ val = readl(phychan->base + PL080_CH_CONFIG);
- writel(val | PL080_CONFIG_ENABLE, ch->base + PL080_CH_CONFIG);
+ writel(val | PL080_CONFIG_ENABLE, phychan->base + PL080_CH_CONFIG);
}
/*
*
* Disabling individual channels could lose data.
*
- * Disable the peripheral DMA after disabling the DMAC
- * in order to allow the DMAC FIFO to drain, and
- * hence allow the channel to show inactive
- *
+ * Disable the peripheral DMA after disabling the DMAC in order to allow
+ * the DMAC FIFO to drain, and hence allow the channel to show inactive
*/
static void pl08x_pause_phy_chan(struct pl08x_phy_chan *ch)
{
/* Wait for channel inactive */
while (pl08x_phy_channel_busy(ch))
- ;
+ cpu_relax();
}
static void pl08x_resume_phy_chan(struct pl08x_phy_chan *ch)
static u32 pl08x_getbytes_chan(struct pl08x_dma_chan *plchan)
{
struct pl08x_phy_chan *ch;
- struct pl08x_txd *txdi = NULL;
struct pl08x_txd *txd;
unsigned long flags;
- u32 bytes = 0;
+ size_t bytes = 0;
spin_lock_irqsave(&plchan->lock, flags);
-
ch = plchan->phychan;
txd = plchan->at;
/*
- * Next follow the LLIs to get the number of pending bytes in the
- * currently active transaction.
+ * Follow the LLIs to get the number of remaining
+ * bytes in the currently active transaction.
*/
if (ch && txd) {
- struct lli *llis_va = txd->llis_va;
- struct lli *llis_bus = (struct lli *) txd->llis_bus;
- u32 clli = readl(ch->base + PL080_CH_LLI);
+ u32 clli = readl(ch->base + PL080_CH_LLI) & ~PL080_LLI_LM_AHB2;
- /* First get the bytes in the current active LLI */
+ /* First get the remaining bytes in the active transfer */
bytes = get_bytes_in_cctl(readl(ch->base + PL080_CH_CONTROL));
if (clli) {
- int i = 0;
+ struct pl08x_lli *llis_va = txd->llis_va;
+ dma_addr_t llis_bus = txd->llis_bus;
+ int index;
+
+ BUG_ON(clli < llis_bus || clli >= llis_bus +
+ sizeof(struct pl08x_lli) * MAX_NUM_TSFR_LLIS);
+
+ /*
+ * Locate the next LLI - as this is an array,
+ * it's simple maths to find.
+ */
+ index = (clli - llis_bus) / sizeof(struct pl08x_lli);
- /* Forward to the LLI pointed to by clli */
- while ((clli != (u32) &(llis_bus[i])) &&
- (i < MAX_NUM_TSFR_LLIS))
- i++;
+ for (; index < MAX_NUM_TSFR_LLIS; index++) {
+ bytes += get_bytes_in_cctl(llis_va[index].cctl);
- while (clli) {
- bytes += get_bytes_in_cctl(llis_va[i].cctl);
/*
- * A clli of 0x00000000 will terminate the
- * LLI list
+ * A LLI pointer of 0 terminates the LLI list
*/
- clli = llis_va[i].next;
- i++;
+ if (!llis_va[index].lli)
+ break;
}
}
}
/* Sum up all queued transactions */
- if (!list_empty(&plchan->desc_list)) {
- list_for_each_entry(txdi, &plchan->desc_list, node) {
+ if (!list_empty(&plchan->pend_list)) {
+ struct pl08x_txd *txdi;
+ list_for_each_entry(txdi, &plchan->pend_list, node) {
bytes += txdi->len;
}
-
}
spin_unlock_irqrestore(&plchan->lock, flags);
/*
* Allocate a physical channel for a virtual channel
+ *
+ * Try to locate a physical channel to be used for this transfer. If all
+ * are taken return NULL and the requester will have to cope by using
+ * some fallback PIO mode or retrying later.
*/
static struct pl08x_phy_chan *
pl08x_get_phy_channel(struct pl08x_driver_data *pl08x,
unsigned long flags;
int i;
- /*
- * Try to locate a physical channel to be used for
- * this transfer. If all are taken return NULL and
- * the requester will have to cope by using some fallback
- * PIO mode or retrying later.
- */
for (i = 0; i < pl08x->vd->channels; i++) {
ch = &pl08x->phy_chans[i];
}
static inline u32 pl08x_cctl_bits(u32 cctl, u8 srcwidth, u8 dstwidth,
- u32 tsize)
+ size_t tsize)
{
u32 retbits = cctl;
- /* Remove all src, dst and transfersize bits */
+ /* Remove all src, dst and transfer size bits */
retbits &= ~PL080_CONTROL_DWIDTH_MASK;
retbits &= ~PL080_CONTROL_SWIDTH_MASK;
retbits &= ~PL080_CONTROL_TRANSFER_SIZE_MASK;
return retbits;
}
+struct pl08x_lli_build_data {
+ struct pl08x_txd *txd;
+ struct pl08x_driver_data *pl08x;
+ struct pl08x_bus_data srcbus;
+ struct pl08x_bus_data dstbus;
+ size_t remainder;
+};
+
/*
- * Autoselect a master bus to use for the transfer
- * this prefers the destination bus if both available
- * if fixed address on one bus the other will be chosen
+ * Autoselect a master bus to use for the transfer this prefers the
+ * destination bus if both available if fixed address on one bus the
+ * other will be chosen
*/
-void pl08x_choose_master_bus(struct pl08x_bus_data *src_bus,
- struct pl08x_bus_data *dst_bus, struct pl08x_bus_data **mbus,
- struct pl08x_bus_data **sbus, u32 cctl)
+static void pl08x_choose_master_bus(struct pl08x_lli_build_data *bd,
+ struct pl08x_bus_data **mbus, struct pl08x_bus_data **sbus, u32 cctl)
{
if (!(cctl & PL080_CONTROL_DST_INCR)) {
- *mbus = src_bus;
- *sbus = dst_bus;
+ *mbus = &bd->srcbus;
+ *sbus = &bd->dstbus;
} else if (!(cctl & PL080_CONTROL_SRC_INCR)) {
- *mbus = dst_bus;
- *sbus = src_bus;
+ *mbus = &bd->dstbus;
+ *sbus = &bd->srcbus;
} else {
- if (dst_bus->buswidth == 4) {
- *mbus = dst_bus;
- *sbus = src_bus;
- } else if (src_bus->buswidth == 4) {
- *mbus = src_bus;
- *sbus = dst_bus;
- } else if (dst_bus->buswidth == 2) {
- *mbus = dst_bus;
- *sbus = src_bus;
- } else if (src_bus->buswidth == 2) {
- *mbus = src_bus;
- *sbus = dst_bus;
+ if (bd->dstbus.buswidth == 4) {
+ *mbus = &bd->dstbus;
+ *sbus = &bd->srcbus;
+ } else if (bd->srcbus.buswidth == 4) {
+ *mbus = &bd->srcbus;
+ *sbus = &bd->dstbus;
+ } else if (bd->dstbus.buswidth == 2) {
+ *mbus = &bd->dstbus;
+ *sbus = &bd->srcbus;
+ } else if (bd->srcbus.buswidth == 2) {
+ *mbus = &bd->srcbus;
+ *sbus = &bd->dstbus;
} else {
- /* src_bus->buswidth == 1 */
- *mbus = dst_bus;
- *sbus = src_bus;
+ /* bd->srcbus.buswidth == 1 */
+ *mbus = &bd->dstbus;
+ *sbus = &bd->srcbus;
}
}
}
/*
- * Fills in one LLI for a certain transfer descriptor
- * and advance the counter
+ * Fills in one LLI for a certain transfer descriptor and advance the counter
*/
-int pl08x_fill_lli_for_desc(struct pl08x_driver_data *pl08x,
- struct pl08x_txd *txd, int num_llis, int len,
- u32 cctl, u32 *remainder)
+static void pl08x_fill_lli_for_desc(struct pl08x_lli_build_data *bd,
+ int num_llis, int len, u32 cctl)
{
- struct lli *llis_va = txd->llis_va;
- struct lli *llis_bus = (struct lli *) txd->llis_bus;
+ struct pl08x_lli *llis_va = bd->txd->llis_va;
+ dma_addr_t llis_bus = bd->txd->llis_bus;
BUG_ON(num_llis >= MAX_NUM_TSFR_LLIS);
- llis_va[num_llis].cctl = cctl;
- llis_va[num_llis].src = txd->srcbus.addr;
- llis_va[num_llis].dst = txd->dstbus.addr;
-
- /*
- * On versions with dual masters, you can optionally AND on
- * PL080_LLI_LM_AHB2 to the LLI to tell the hardware to read
- * in new LLIs with that controller, but we always try to
- * choose AHB1 to point into memory. The idea is to have AHB2
- * fixed on the peripheral and AHB1 messing around in the
- * memory. So we don't manipulate this bit currently.
- */
-
- llis_va[num_llis].next =
- (dma_addr_t)((u32) &(llis_bus[num_llis + 1]));
+ llis_va[num_llis].cctl = cctl;
+ llis_va[num_llis].src = bd->srcbus.addr;
+ llis_va[num_llis].dst = bd->dstbus.addr;
+ llis_va[num_llis].lli = llis_bus + (num_llis + 1) * sizeof(struct pl08x_lli);
+ if (bd->pl08x->lli_buses & PL08X_AHB2)
+ llis_va[num_llis].lli |= PL080_LLI_LM_AHB2;
if (cctl & PL080_CONTROL_SRC_INCR)
- txd->srcbus.addr += len;
+ bd->srcbus.addr += len;
if (cctl & PL080_CONTROL_DST_INCR)
- txd->dstbus.addr += len;
+ bd->dstbus.addr += len;
- *remainder -= len;
+ BUG_ON(bd->remainder < len);
- return num_llis + 1;
+ bd->remainder -= len;
}
/*
- * Return number of bytes to fill to boundary, or len
+ * Return number of bytes to fill to boundary, or len.
+ * This calculation works for any value of addr.
*/
-static inline u32 pl08x_pre_boundary(u32 addr, u32 len)
+static inline size_t pl08x_pre_boundary(u32 addr, size_t len)
{
- u32 boundary;
-
- boundary = ((addr >> PL08X_BOUNDARY_SHIFT) + 1)
- << PL08X_BOUNDARY_SHIFT;
+ size_t boundary_len = PL08X_BOUNDARY_SIZE -
+ (addr & (PL08X_BOUNDARY_SIZE - 1));
- if (boundary < addr + len)
- return boundary - addr;
- else
- return len;
+ return min(boundary_len, len);
}
/*
static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
struct pl08x_txd *txd)
{
- struct pl08x_channel_data *cd = txd->cd;
struct pl08x_bus_data *mbus, *sbus;
- u32 remainder;
+ struct pl08x_lli_build_data bd;
int num_llis = 0;
u32 cctl;
- int max_bytes_per_lli;
- int total_bytes = 0;
- struct lli *llis_va;
- struct lli *llis_bus;
-
- if (!txd) {
- dev_err(&pl08x->adev->dev, "%s no descriptor\n", __func__);
- return 0;
- }
+ size_t max_bytes_per_lli;
+ size_t total_bytes = 0;
+ struct pl08x_lli *llis_va;
txd->llis_va = dma_pool_alloc(pl08x->pool, GFP_NOWAIT,
&txd->llis_bus);
pl08x->pool_ctr++;
- /*
- * Initialize bus values for this transfer
- * from the passed optimal values
- */
- if (!cd) {
- dev_err(&pl08x->adev->dev, "%s no channel data\n", __func__);
- return 0;
- }
+ /* Get the default CCTL */
+ cctl = txd->cctl;
- /* Get the default CCTL from the platform data */
- cctl = cd->cctl;
-
- /*
- * On the PL080 we have two bus masters and we
- * should select one for source and one for
- * destination. We try to use AHB2 for the
- * bus which does not increment (typically the
- * peripheral) else we just choose something.
- */
- cctl &= ~(PL080_CONTROL_DST_AHB2 | PL080_CONTROL_SRC_AHB2);
- if (pl08x->vd->dualmaster) {
- if (cctl & PL080_CONTROL_SRC_INCR)
- /* Source increments, use AHB2 for destination */
- cctl |= PL080_CONTROL_DST_AHB2;
- else if (cctl & PL080_CONTROL_DST_INCR)
- /* Destination increments, use AHB2 for source */
- cctl |= PL080_CONTROL_SRC_AHB2;
- else
- /* Just pick something, source AHB1 dest AHB2 */
- cctl |= PL080_CONTROL_DST_AHB2;
- }
+ bd.txd = txd;
+ bd.pl08x = pl08x;
+ bd.srcbus.addr = txd->src_addr;
+ bd.dstbus.addr = txd->dst_addr;
/* Find maximum width of the source bus */
- txd->srcbus.maxwidth =
+ bd.srcbus.maxwidth =
pl08x_get_bytes_for_cctl((cctl & PL080_CONTROL_SWIDTH_MASK) >>
PL080_CONTROL_SWIDTH_SHIFT);
/* Find maximum width of the destination bus */
- txd->dstbus.maxwidth =
+ bd.dstbus.maxwidth =
pl08x_get_bytes_for_cctl((cctl & PL080_CONTROL_DWIDTH_MASK) >>
PL080_CONTROL_DWIDTH_SHIFT);
/* Set up the bus widths to the maximum */
- txd->srcbus.buswidth = txd->srcbus.maxwidth;
- txd->dstbus.buswidth = txd->dstbus.maxwidth;
+ bd.srcbus.buswidth = bd.srcbus.maxwidth;
+ bd.dstbus.buswidth = bd.dstbus.maxwidth;
dev_vdbg(&pl08x->adev->dev,
"%s source bus is %d bytes wide, dest bus is %d bytes wide\n",
- __func__, txd->srcbus.buswidth, txd->dstbus.buswidth);
+ __func__, bd.srcbus.buswidth, bd.dstbus.buswidth);
/*
* Bytes transferred == tsize * MIN(buswidths), not max(buswidths)
*/
- max_bytes_per_lli = min(txd->srcbus.buswidth, txd->dstbus.buswidth) *
+ max_bytes_per_lli = min(bd.srcbus.buswidth, bd.dstbus.buswidth) *
PL080_CONTROL_TRANSFER_SIZE_MASK;
dev_vdbg(&pl08x->adev->dev,
- "%s max bytes per lli = %d\n",
+ "%s max bytes per lli = %zu\n",
__func__, max_bytes_per_lli);
/* We need to count this down to zero */
- remainder = txd->len;
+ bd.remainder = txd->len;
dev_vdbg(&pl08x->adev->dev,
- "%s remainder = %d\n",
- __func__, remainder);
+ "%s remainder = %zu\n",
+ __func__, bd.remainder);
/*
* Choose bus to align to
* - prefers destination bus if both available
* - if fixed address on one bus chooses other
- * - modifies cctl to choose an apropriate master
- */
- pl08x_choose_master_bus(&txd->srcbus, &txd->dstbus,
- &mbus, &sbus, cctl);
-
-
- /*
- * The lowest bit of the LLI register
- * is also used to indicate which master to
- * use for reading the LLIs.
*/
+ pl08x_choose_master_bus(&bd, &mbus, &sbus, cctl);
if (txd->len < mbus->buswidth) {
- /*
- * Less than a bus width available
- * - send as single bytes
- */
- while (remainder) {
+ /* Less than a bus width available - send as single bytes */
+ while (bd.remainder) {
dev_vdbg(&pl08x->adev->dev,
"%s single byte LLIs for a transfer of "
- "less than a bus width (remain %08x)\n",
- __func__, remainder);
+ "less than a bus width (remain 0x%08x)\n",
+ __func__, bd.remainder);
cctl = pl08x_cctl_bits(cctl, 1, 1, 1);
- num_llis =
- pl08x_fill_lli_for_desc(pl08x, txd, num_llis, 1,
- cctl, &remainder);
+ pl08x_fill_lli_for_desc(&bd, num_llis++, 1, cctl);
total_bytes++;
}
} else {
- /*
- * Make one byte LLIs until master bus is aligned
- * - slave will then be aligned also
- */
+ /* Make one byte LLIs until master bus is aligned */
while ((mbus->addr) % (mbus->buswidth)) {
dev_vdbg(&pl08x->adev->dev,
"%s adjustment lli for less than bus width "
- "(remain %08x)\n",
- __func__, remainder);
+ "(remain 0x%08x)\n",
+ __func__, bd.remainder);
cctl = pl08x_cctl_bits(cctl, 1, 1, 1);
- num_llis = pl08x_fill_lli_for_desc
- (pl08x, txd, num_llis, 1, cctl, &remainder);
+ pl08x_fill_lli_for_desc(&bd, num_llis++, 1, cctl);
total_bytes++;
}
/*
- * Master now aligned
+ * Master now aligned
* - if slave is not then we must set its width down
*/
if (sbus->addr % sbus->buswidth) {
* Make largest possible LLIs until less than one bus
* width left
*/
- while (remainder > (mbus->buswidth - 1)) {
- int lli_len, target_len;
- int tsize;
- int odd_bytes;
+ while (bd.remainder > (mbus->buswidth - 1)) {
+ size_t lli_len, target_len, tsize, odd_bytes;
/*
* If enough left try to send max possible,
* otherwise try to send the remainder
*/
- target_len = remainder;
- if (remainder > max_bytes_per_lli)
- target_len = max_bytes_per_lli;
+ target_len = min(bd.remainder, max_bytes_per_lli);
/*
- * Set bus lengths for incrementing busses
- * to number of bytes which fill to next memory
- * boundary
+ * Set bus lengths for incrementing buses to the
+ * number of bytes which fill to next memory boundary,
+ * limiting on the target length calculated above.
*/
if (cctl & PL080_CONTROL_SRC_INCR)
- txd->srcbus.fill_bytes =
- pl08x_pre_boundary(
- txd->srcbus.addr,
- remainder);
+ bd.srcbus.fill_bytes =
+ pl08x_pre_boundary(bd.srcbus.addr,
+ target_len);
else
- txd->srcbus.fill_bytes =
- max_bytes_per_lli;
+ bd.srcbus.fill_bytes = target_len;
if (cctl & PL080_CONTROL_DST_INCR)
- txd->dstbus.fill_bytes =
- pl08x_pre_boundary(
- txd->dstbus.addr,
- remainder);
+ bd.dstbus.fill_bytes =
+ pl08x_pre_boundary(bd.dstbus.addr,
+ target_len);
else
- txd->dstbus.fill_bytes =
- max_bytes_per_lli;
+ bd.dstbus.fill_bytes = target_len;
- /*
- * Find the nearest
- */
- lli_len = min(txd->srcbus.fill_bytes,
- txd->dstbus.fill_bytes);
+ /* Find the nearest */
+ lli_len = min(bd.srcbus.fill_bytes,
+ bd.dstbus.fill_bytes);
- BUG_ON(lli_len > remainder);
+ BUG_ON(lli_len > bd.remainder);
if (lli_len <= 0) {
dev_err(&pl08x->adev->dev,
- "%s lli_len is %d, <= 0\n",
+ "%s lli_len is %zu, <= 0\n",
__func__, lli_len);
return 0;
}
if (lli_len == target_len) {
/*
- * Can send what we wanted
- */
- /*
- * Maintain alignment
+ * Can send what we wanted.
+ * Maintain alignment
*/
lli_len = (lli_len/mbus->buswidth) *
mbus->buswidth;
} else {
/*
* So now we know how many bytes to transfer
- * to get to the nearest boundary
- * The next lli will past the boundary
- * - however we may be working to a boundary
- * on the slave bus
- * We need to ensure the master stays aligned
+ * to get to the nearest boundary. The next
+ * LLI will past the boundary. However, we
+ * may be working to a boundary on the slave
+ * bus. We need to ensure the master stays
+ * aligned, and that we are working in
+ * multiples of the bus widths.
*/
odd_bytes = lli_len % mbus->buswidth;
- /*
- * - and that we are working in multiples
- * of the bus widths
- */
lli_len -= odd_bytes;
}
if (target_len != lli_len) {
dev_vdbg(&pl08x->adev->dev,
- "%s can't send what we want. Desired %08x, lli of %08x bytes in txd of %08x\n",
+ "%s can't send what we want. Desired 0x%08zx, lli of 0x%08zx bytes in txd of 0x%08zx\n",
__func__, target_len, lli_len, txd->len);
}
cctl = pl08x_cctl_bits(cctl,
- txd->srcbus.buswidth,
- txd->dstbus.buswidth,
+ bd.srcbus.buswidth,
+ bd.dstbus.buswidth,
tsize);
dev_vdbg(&pl08x->adev->dev,
- "%s fill lli with single lli chunk of size %08x (remainder %08x)\n",
- __func__, lli_len, remainder);
- num_llis = pl08x_fill_lli_for_desc(pl08x, txd,
- num_llis, lli_len, cctl,
- &remainder);
+ "%s fill lli with single lli chunk of size 0x%08zx (remainder 0x%08zx)\n",
+ __func__, lli_len, bd.remainder);
+ pl08x_fill_lli_for_desc(&bd, num_llis++,
+ lli_len, cctl);
total_bytes += lli_len;
}
if (odd_bytes) {
/*
- * Creep past the boundary,
- * maintaining master alignment
+ * Creep past the boundary, maintaining
+ * master alignment
*/
int j;
for (j = 0; (j < mbus->buswidth)
- && (remainder); j++) {
+ && (bd.remainder); j++) {
cctl = pl08x_cctl_bits(cctl, 1, 1, 1);
dev_vdbg(&pl08x->adev->dev,
- "%s align with boundardy, single byte (remain %08x)\n",
- __func__, remainder);
- num_llis =
- pl08x_fill_lli_for_desc(pl08x,
- txd, num_llis, 1,
- cctl, &remainder);
+ "%s align with boundary, single byte (remain 0x%08zx)\n",
+ __func__, bd.remainder);
+ pl08x_fill_lli_for_desc(&bd,
+ num_llis++, 1, cctl);
total_bytes++;
}
}
/*
* Send any odd bytes
*/
- if (remainder < 0) {
- dev_err(&pl08x->adev->dev, "%s remainder not fitted 0x%08x bytes\n",
- __func__, remainder);
- return 0;
- }
-
- while (remainder) {
+ while (bd.remainder) {
cctl = pl08x_cctl_bits(cctl, 1, 1, 1);
dev_vdbg(&pl08x->adev->dev,
- "%s align with boundardy, single odd byte (remain %d)\n",
- __func__, remainder);
- num_llis = pl08x_fill_lli_for_desc(pl08x, txd, num_llis,
- 1, cctl, &remainder);
+ "%s align with boundary, single odd byte (remain %zu)\n",
+ __func__, bd.remainder);
+ pl08x_fill_lli_for_desc(&bd, num_llis++, 1, cctl);
total_bytes++;
}
}
if (total_bytes != txd->len) {
dev_err(&pl08x->adev->dev,
- "%s size of encoded lli:s don't match total txd, transferred 0x%08x from size 0x%08x\n",
+ "%s size of encoded lli:s don't match total txd, transferred 0x%08zx from size 0x%08zx\n",
__func__, total_bytes, txd->len);
return 0;
}
__func__, (u32) MAX_NUM_TSFR_LLIS);
return 0;
}
- /*
- * Decide whether this is a loop or a terminated transfer
- */
- llis_va = txd->llis_va;
- llis_bus = (struct lli *) txd->llis_bus;
- if (cd->circular_buffer) {
- /*
- * Loop the circular buffer so that the next element
- * points back to the beginning of the LLI.
- */
- llis_va[num_llis - 1].next =
- (dma_addr_t)((unsigned int)&(llis_bus[0]));
- } else {
- /*
- * On non-circular buffers, the final LLI terminates
- * the LLI.
- */
- llis_va[num_llis - 1].next = 0;
- /*
- * The final LLI element shall also fire an interrupt
- */
- llis_va[num_llis - 1].cctl |= PL080_CONTROL_TC_IRQ_EN;
- }
-
- /* Now store the channel register values */
- txd->csrc = llis_va[0].src;
- txd->cdst = llis_va[0].dst;
- if (num_llis > 1)
- txd->clli = llis_va[0].next;
- else
- txd->clli = 0;
-
- txd->cctl = llis_va[0].cctl;
- /* ccfg will be set at physical channel allocation time */
+ llis_va = txd->llis_va;
+ /* The final LLI terminates the LLI. */
+ llis_va[num_llis - 1].lli = 0;
+ /* The final LLI element shall also fire an interrupt. */
+ llis_va[num_llis - 1].cctl |= PL080_CONTROL_TC_IRQ_EN;
#ifdef VERBOSE_DEBUG
{
for (i = 0; i < num_llis; i++) {
dev_vdbg(&pl08x->adev->dev,
- "lli %d @%p: csrc=%08x, cdst=%08x, cctl=%08x, clli=%08x\n",
+ "lli %d @%p: csrc=0x%08x, cdst=0x%08x, cctl=0x%08x, clli=0x%08x\n",
i,
&llis_va[i],
llis_va[i].src,
llis_va[i].dst,
llis_va[i].cctl,
- llis_va[i].next
+ llis_va[i].lli
);
}
}
static void pl08x_free_txd(struct pl08x_driver_data *pl08x,
struct pl08x_txd *txd)
{
- if (!txd)
- dev_err(&pl08x->adev->dev,
- "%s no descriptor to free\n",
- __func__);
-
/* Free the LLI */
- dma_pool_free(pl08x->pool, txd->llis_va,
- txd->llis_bus);
+ dma_pool_free(pl08x->pool, txd->llis_va, txd->llis_bus);
pl08x->pool_ctr--;
struct pl08x_txd *txdi = NULL;
struct pl08x_txd *next;
- if (!list_empty(&plchan->desc_list)) {
+ if (!list_empty(&plchan->pend_list)) {
list_for_each_entry_safe(txdi,
- next, &plchan->desc_list, node) {
+ next, &plchan->pend_list, node) {
list_del(&txdi->node);
pl08x_free_txd(pl08x, txdi);
}
-
}
}
return -EBUSY;
}
ch->signal = ret;
+
+ /* Assign the flow control signal to this channel */
+ if (txd->direction == DMA_TO_DEVICE)
+ txd->ccfg |= ch->signal << PL080_CONFIG_DST_SEL_SHIFT;
+ else if (txd->direction == DMA_FROM_DEVICE)
+ txd->ccfg |= ch->signal << PL080_CONFIG_SRC_SEL_SHIFT;
}
dev_dbg(&pl08x->adev->dev, "allocated physical channel %d and signal %d for xfer on %s\n",
ch->signal,
plchan->name);
+ plchan->phychan_hold++;
plchan->phychan = ch;
return 0;
}
+static void release_phy_channel(struct pl08x_dma_chan *plchan)
+{
+ struct pl08x_driver_data *pl08x = plchan->host;
+
+ if ((plchan->phychan->signal >= 0) && pl08x->pd->put_signal) {
+ pl08x->pd->put_signal(plchan);
+ plchan->phychan->signal = -1;
+ }
+ pl08x_put_phy_channel(pl08x, plchan->phychan);
+ plchan->phychan = NULL;
+}
+
static dma_cookie_t pl08x_tx_submit(struct dma_async_tx_descriptor *tx)
{
struct pl08x_dma_chan *plchan = to_pl08x_chan(tx->chan);
+ struct pl08x_txd *txd = to_pl08x_txd(tx);
+ unsigned long flags;
- atomic_inc(&plchan->last_issued);
- tx->cookie = atomic_read(&plchan->last_issued);
- /* This unlock follows the lock in the prep() function */
- spin_unlock_irqrestore(&plchan->lock, plchan->lockflags);
+ spin_lock_irqsave(&plchan->lock, flags);
+
+ plchan->chan.cookie += 1;
+ if (plchan->chan.cookie < 0)
+ plchan->chan.cookie = 1;
+ tx->cookie = plchan->chan.cookie;
+
+ /* Put this onto the pending list */
+ list_add_tail(&txd->node, &plchan->pend_list);
+
+ /*
+ * If there was no physical channel available for this memcpy,
+ * stack the request up and indicate that the channel is waiting
+ * for a free physical channel.
+ */
+ if (!plchan->slave && !plchan->phychan) {
+ /* Do this memcpy whenever there is a channel ready */
+ plchan->state = PL08X_CHAN_WAITING;
+ plchan->waiting = txd;
+ } else {
+ plchan->phychan_hold--;
+ }
+
+ spin_unlock_irqrestore(&plchan->lock, flags);
return tx->cookie;
}
}
/*
- * Code accessing dma_async_is_complete() in a tight loop
- * may give problems - could schedule where indicated.
- * If slaves are relying on interrupts to signal completion this
- * function must not be called with interrupts disabled
+ * Code accessing dma_async_is_complete() in a tight loop may give problems.
+ * If slaves are relying on interrupts to signal completion this function
+ * must not be called with interrupts disabled.
*/
static enum dma_status
pl08x_dma_tx_status(struct dma_chan *chan,
enum dma_status ret;
u32 bytesleft = 0;
- last_used = atomic_read(&plchan->last_issued);
+ last_used = plchan->chan.cookie;
last_complete = plchan->lc;
ret = dma_async_is_complete(cookie, last_complete, last_used);
return ret;
}
- /*
- * schedule(); could be inserted here
- */
-
/*
* This cookie not complete yet
*/
- last_used = atomic_read(&plchan->last_issued);
+ last_used = plchan->chan.cookie;
last_complete = plchan->lc;
/* Get number of bytes left in the active transactions and queue */
},
};
-static void dma_set_runtime_config(struct dma_chan *chan,
- struct dma_slave_config *config)
+static int dma_set_runtime_config(struct dma_chan *chan,
+ struct dma_slave_config *config)
{
struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
struct pl08x_driver_data *pl08x = plchan->host;
struct pl08x_channel_data *cd = plchan->cd;
enum dma_slave_buswidth addr_width;
+ dma_addr_t addr;
u32 maxburst;
u32 cctl = 0;
- /* Mask out all except src and dst channel */
- u32 ccfg = cd->ccfg & 0x000003DEU;
- int i = 0;
+ int i;
+
+ if (!plchan->slave)
+ return -EINVAL;
/* Transfer direction */
plchan->runtime_direction = config->direction;
if (config->direction == DMA_TO_DEVICE) {
- plchan->runtime_addr = config->dst_addr;
- cctl |= PL080_CONTROL_SRC_INCR;
- ccfg |= PL080_FLOW_MEM2PER << PL080_CONFIG_FLOW_CONTROL_SHIFT;
+ addr = config->dst_addr;
addr_width = config->dst_addr_width;
maxburst = config->dst_maxburst;
} else if (config->direction == DMA_FROM_DEVICE) {
- plchan->runtime_addr = config->src_addr;
- cctl |= PL080_CONTROL_DST_INCR;
- ccfg |= PL080_FLOW_PER2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT;
+ addr = config->src_addr;
addr_width = config->src_addr_width;
maxburst = config->src_maxburst;
} else {
dev_err(&pl08x->adev->dev,
"bad runtime_config: alien transfer direction\n");
- return;
+ return -EINVAL;
}
switch (addr_width) {
default:
dev_err(&pl08x->adev->dev,
"bad runtime_config: alien address width\n");
- return;
+ return -EINVAL;
}
/*
* Now decide on a maxburst:
- * If this channel will only request single transfers, set
- * this down to ONE element.
+ * If this channel will only request single transfers, set this
+ * down to ONE element. Also select one element if no maxburst
+ * is specified.
*/
- if (plchan->cd->single) {
+ if (plchan->cd->single || maxburst == 0) {
cctl |= (PL080_BSIZE_1 << PL080_CONTROL_SB_SIZE_SHIFT) |
(PL080_BSIZE_1 << PL080_CONTROL_DB_SIZE_SHIFT);
} else {
- while (i < ARRAY_SIZE(burst_sizes)) {
+ for (i = 0; i < ARRAY_SIZE(burst_sizes); i++)
if (burst_sizes[i].burstwords <= maxburst)
break;
- i++;
- }
cctl |= burst_sizes[i].reg;
}
- /* Access the cell in privileged mode, non-bufferable, non-cacheable */
- cctl &= ~PL080_CONTROL_PROT_MASK;
- cctl |= PL080_CONTROL_PROT_SYS;
+ plchan->runtime_addr = addr;
/* Modify the default channel data to fit PrimeCell request */
cd->cctl = cctl;
- cd->ccfg = ccfg;
dev_dbg(&pl08x->adev->dev,
"configured channel %s (%s) for %s, data width %d, "
- "maxburst %d words, LE, CCTL=%08x, CCFG=%08x\n",
+ "maxburst %d words, LE, CCTL=0x%08x\n",
dma_chan_name(chan), plchan->name,
(config->direction == DMA_FROM_DEVICE) ? "RX" : "TX",
addr_width,
maxburst,
- cctl, ccfg);
+ cctl);
+
+ return 0;
}
/*
static void pl08x_issue_pending(struct dma_chan *chan)
{
struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
- struct pl08x_driver_data *pl08x = plchan->host;
unsigned long flags;
spin_lock_irqsave(&plchan->lock, flags);
- /* Something is already active */
- if (plchan->at) {
- spin_unlock_irqrestore(&plchan->lock, flags);
- return;
- }
-
- /* Didn't get a physical channel so waiting for it ... */
- if (plchan->state == PL08X_CHAN_WAITING)
+ /* Something is already active, or we're waiting for a channel... */
+ if (plchan->at || plchan->state == PL08X_CHAN_WAITING) {
+ spin_unlock_irqrestore(&plchan->lock, flags);
return;
+ }
/* Take the first element in the queue and execute it */
- if (!list_empty(&plchan->desc_list)) {
+ if (!list_empty(&plchan->pend_list)) {
struct pl08x_txd *next;
- next = list_first_entry(&plchan->desc_list,
+ next = list_first_entry(&plchan->pend_list,
struct pl08x_txd,
node);
list_del(&next->node);
- plchan->at = next;
plchan->state = PL08X_CHAN_RUNNING;
- /* Configure the physical channel for the active txd */
- pl08x_config_phychan_for_txd(plchan);
- pl08x_set_cregs(pl08x, plchan->phychan);
- pl08x_enable_phy_chan(pl08x, plchan->phychan);
+ pl08x_start_txd(plchan, next);
}
spin_unlock_irqrestore(&plchan->lock, flags);
static int pl08x_prep_channel_resources(struct pl08x_dma_chan *plchan,
struct pl08x_txd *txd)
{
- int num_llis;
struct pl08x_driver_data *pl08x = plchan->host;
- int ret;
+ unsigned long flags;
+ int num_llis, ret;
num_llis = pl08x_fill_llis_for_desc(pl08x, txd);
-
- if (!num_llis)
+ if (!num_llis) {
+ kfree(txd);
return -EINVAL;
+ }
- spin_lock_irqsave(&plchan->lock, plchan->lockflags);
-
- /*
- * If this device is not using a circular buffer then
- * queue this new descriptor for transfer.
- * The descriptor for a circular buffer continues
- * to be used until the channel is freed.
- */
- if (txd->cd->circular_buffer)
- dev_err(&pl08x->adev->dev,
- "%s attempting to queue a circular buffer\n",
- __func__);
- else
- list_add_tail(&txd->node,
- &plchan->desc_list);
+ spin_lock_irqsave(&plchan->lock, flags);
/*
* See if we already have a physical channel allocated,
ret = prep_phy_channel(plchan, txd);
if (ret) {
/*
- * No physical channel available, we will
- * stack up the memcpy channels until there is a channel
- * available to handle it whereas slave transfers may
- * have been denied due to platform channel muxing restrictions
- * and since there is no guarantee that this will ever be
- * resolved, and since the signal must be aquired AFTER
- * aquiring the physical channel, we will let them be NACK:ed
- * with -EBUSY here. The drivers can alway retry the prep()
- * call if they are eager on doing this using DMA.
+ * No physical channel was available.
+ *
+ * memcpy transfers can be sorted out at submission time.
+ *
+ * Slave transfers may have been denied due to platform
+ * channel muxing restrictions. Since there is no guarantee
+ * that this will ever be resolved, and the signal must be
+ * acquired AFTER acquiring the physical channel, we will let
+ * them be NACK:ed with -EBUSY here. The drivers can retry
+ * the prep() call if they are eager on doing this using DMA.
*/
if (plchan->slave) {
pl08x_free_txd_list(pl08x, plchan);
- spin_unlock_irqrestore(&plchan->lock, plchan->lockflags);
+ pl08x_free_txd(pl08x, txd);
+ spin_unlock_irqrestore(&plchan->lock, flags);
return -EBUSY;
}
- /* Do this memcpy whenever there is a channel ready */
- plchan->state = PL08X_CHAN_WAITING;
- plchan->waiting = txd;
} else
/*
- * Else we're all set, paused and ready to roll,
- * status will switch to PL08X_CHAN_RUNNING when
- * we call issue_pending(). If there is something
- * running on the channel already we don't change
- * its state.
+ * Else we're all set, paused and ready to roll, status
+ * will switch to PL08X_CHAN_RUNNING when we call
+ * issue_pending(). If there is something running on the
+ * channel already we don't change its state.
*/
if (plchan->state == PL08X_CHAN_IDLE)
plchan->state = PL08X_CHAN_PAUSED;
- /*
- * Notice that we leave plchan->lock locked on purpose:
- * it will be unlocked in the subsequent tx_submit()
- * call. This is a consequence of the current API.
- */
+ spin_unlock_irqrestore(&plchan->lock, flags);
return 0;
}
+/*
+ * Given the source and destination available bus masks, select which
+ * will be routed to each port. We try to have source and destination
+ * on separate ports, but always respect the allowable settings.
+ */
+static u32 pl08x_select_bus(struct pl08x_driver_data *pl08x, u8 src, u8 dst)
+{
+ u32 cctl = 0;
+
+ if (!(dst & PL08X_AHB1) || ((dst & PL08X_AHB2) && (src & PL08X_AHB1)))
+ cctl |= PL080_CONTROL_DST_AHB2;
+ if (!(src & PL08X_AHB1) || ((src & PL08X_AHB2) && !(dst & PL08X_AHB2)))
+ cctl |= PL080_CONTROL_SRC_AHB2;
+
+ return cctl;
+}
+
+static struct pl08x_txd *pl08x_get_txd(struct pl08x_dma_chan *plchan,
+ unsigned long flags)
+{
+ struct pl08x_txd *txd = kzalloc(sizeof(struct pl08x_txd), GFP_NOWAIT);
+
+ if (txd) {
+ dma_async_tx_descriptor_init(&txd->tx, &plchan->chan);
+ txd->tx.flags = flags;
+ txd->tx.tx_submit = pl08x_tx_submit;
+ INIT_LIST_HEAD(&txd->node);
+
+ /* Always enable error and terminal interrupts */
+ txd->ccfg = PL080_CONFIG_ERR_IRQ_MASK |
+ PL080_CONFIG_TC_IRQ_MASK;
+ }
+ return txd;
+}
+
/*
* Initialize a descriptor to be used by memcpy submit
*/
struct pl08x_txd *txd;
int ret;
- txd = kzalloc(sizeof(struct pl08x_txd), GFP_NOWAIT);
+ txd = pl08x_get_txd(plchan, flags);
if (!txd) {
dev_err(&pl08x->adev->dev,
"%s no memory for descriptor\n", __func__);
return NULL;
}
- dma_async_tx_descriptor_init(&txd->tx, chan);
txd->direction = DMA_NONE;
- txd->srcbus.addr = src;
- txd->dstbus.addr = dest;
+ txd->src_addr = src;
+ txd->dst_addr = dest;
+ txd->len = len;
/* Set platform data for m2m */
- txd->cd = &pl08x->pd->memcpy_channel;
+ txd->ccfg |= PL080_FLOW_MEM2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT;
+ txd->cctl = pl08x->pd->memcpy_channel.cctl &
+ ~(PL080_CONTROL_DST_AHB2 | PL080_CONTROL_SRC_AHB2);
+
/* Both to be incremented or the code will break */
- txd->cd->cctl |= PL080_CONTROL_SRC_INCR | PL080_CONTROL_DST_INCR;
- txd->tx.tx_submit = pl08x_tx_submit;
- txd->tx.callback = NULL;
- txd->tx.callback_param = NULL;
- txd->len = len;
+ txd->cctl |= PL080_CONTROL_SRC_INCR | PL080_CONTROL_DST_INCR;
+
+ if (pl08x->vd->dualmaster)
+ txd->cctl |= pl08x_select_bus(pl08x,
+ pl08x->mem_buses, pl08x->mem_buses);
- INIT_LIST_HEAD(&txd->node);
ret = pl08x_prep_channel_resources(plchan, txd);
if (ret)
return NULL;
- /*
- * NB: the channel lock is held at this point so tx_submit()
- * must be called in direct succession.
- */
return &txd->tx;
}
-struct dma_async_tx_descriptor *pl08x_prep_slave_sg(
+static struct dma_async_tx_descriptor *pl08x_prep_slave_sg(
struct dma_chan *chan, struct scatterlist *sgl,
unsigned int sg_len, enum dma_data_direction direction,
unsigned long flags)
struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
struct pl08x_driver_data *pl08x = plchan->host;
struct pl08x_txd *txd;
+ u8 src_buses, dst_buses;
int ret;
/*
dev_dbg(&pl08x->adev->dev, "%s prepare transaction of %d bytes from %s\n",
__func__, sgl->length, plchan->name);
- txd = kzalloc(sizeof(struct pl08x_txd), GFP_NOWAIT);
+ txd = pl08x_get_txd(plchan, flags);
if (!txd) {
dev_err(&pl08x->adev->dev, "%s no txd\n", __func__);
return NULL;
}
- dma_async_tx_descriptor_init(&txd->tx, chan);
-
if (direction != plchan->runtime_direction)
dev_err(&pl08x->adev->dev, "%s DMA setup does not match "
"the direction configured for the PrimeCell\n",
* channel target address dynamically at runtime.
*/
txd->direction = direction;
+ txd->len = sgl->length;
+
+ txd->cctl = plchan->cd->cctl &
+ ~(PL080_CONTROL_SRC_AHB2 | PL080_CONTROL_DST_AHB2 |
+ PL080_CONTROL_SRC_INCR | PL080_CONTROL_DST_INCR |
+ PL080_CONTROL_PROT_MASK);
+
+ /* Access the cell in privileged mode, non-bufferable, non-cacheable */
+ txd->cctl |= PL080_CONTROL_PROT_SYS;
+
if (direction == DMA_TO_DEVICE) {
- txd->srcbus.addr = sgl->dma_address;
+ txd->ccfg |= PL080_FLOW_MEM2PER << PL080_CONFIG_FLOW_CONTROL_SHIFT;
+ txd->cctl |= PL080_CONTROL_SRC_INCR;
+ txd->src_addr = sgl->dma_address;
if (plchan->runtime_addr)
- txd->dstbus.addr = plchan->runtime_addr;
+ txd->dst_addr = plchan->runtime_addr;
else
- txd->dstbus.addr = plchan->cd->addr;
+ txd->dst_addr = plchan->cd->addr;
+ src_buses = pl08x->mem_buses;
+ dst_buses = plchan->cd->periph_buses;
} else if (direction == DMA_FROM_DEVICE) {
+ txd->ccfg |= PL080_FLOW_PER2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT;
+ txd->cctl |= PL080_CONTROL_DST_INCR;
if (plchan->runtime_addr)
- txd->srcbus.addr = plchan->runtime_addr;
+ txd->src_addr = plchan->runtime_addr;
else
- txd->srcbus.addr = plchan->cd->addr;
- txd->dstbus.addr = sgl->dma_address;
+ txd->src_addr = plchan->cd->addr;
+ txd->dst_addr = sgl->dma_address;
+ src_buses = plchan->cd->periph_buses;
+ dst_buses = pl08x->mem_buses;
} else {
dev_err(&pl08x->adev->dev,
"%s direction unsupported\n", __func__);
return NULL;
}
- txd->cd = plchan->cd;
- txd->tx.tx_submit = pl08x_tx_submit;
- txd->tx.callback = NULL;
- txd->tx.callback_param = NULL;
- txd->len = sgl->length;
- INIT_LIST_HEAD(&txd->node);
+
+ txd->cctl |= pl08x_select_bus(pl08x, src_buses, dst_buses);
ret = pl08x_prep_channel_resources(plchan, txd);
if (ret)
return NULL;
- /*
- * NB: the channel lock is held at this point so tx_submit()
- * must be called in direct succession.
- */
return &txd->tx;
}
/* Controls applicable to inactive channels */
if (cmd == DMA_SLAVE_CONFIG) {
- dma_set_runtime_config(chan,
- (struct dma_slave_config *)
- arg);
- return 0;
+ return dma_set_runtime_config(chan,
+ (struct dma_slave_config *)arg);
}
/*
* Mark physical channel as free and free any slave
* signal
*/
- if ((plchan->phychan->signal >= 0) &&
- pl08x->pd->put_signal) {
- pl08x->pd->put_signal(plchan);
- plchan->phychan->signal = -1;
- }
- pl08x_put_phy_channel(pl08x, plchan->phychan);
- plchan->phychan = NULL;
+ release_phy_channel(plchan);
}
- /* Stop any pending tasklet */
- tasklet_disable(&plchan->tasklet);
/* Dequeue jobs and free LLIs */
if (plchan->at) {
pl08x_free_txd(pl08x, plchan->at);
/*
* Just check that the device is there and active
- * TODO: turn this bit on/off depending on the number of
- * physical channels actually used, if it is zero... well
- * shut it off. That will save some power. Cut the clock
- * at the same time.
+ * TODO: turn this bit on/off depending on the number of physical channels
+ * actually used, if it is zero... well shut it off. That will save some
+ * power. Cut the clock at the same time.
*/
static void pl08x_ensure_on(struct pl08x_driver_data *pl08x)
{
val = readl(pl08x->base + PL080_CONFIG);
val &= ~(PL080_CONFIG_M2_BE | PL080_CONFIG_M1_BE | PL080_CONFIG_ENABLE);
- /* We implictly clear bit 1 and that means little-endian mode */
+ /* We implicitly clear bit 1 and that means little-endian mode */
val |= PL080_CONFIG_ENABLE;
writel(val, pl08x->base + PL080_CONFIG);
}
+static void pl08x_unmap_buffers(struct pl08x_txd *txd)
+{
+ struct device *dev = txd->tx.chan->device->dev;
+
+ if (!(txd->tx.flags & DMA_COMPL_SKIP_SRC_UNMAP)) {
+ if (txd->tx.flags & DMA_COMPL_SRC_UNMAP_SINGLE)
+ dma_unmap_single(dev, txd->src_addr, txd->len,
+ DMA_TO_DEVICE);
+ else
+ dma_unmap_page(dev, txd->src_addr, txd->len,
+ DMA_TO_DEVICE);
+ }
+ if (!(txd->tx.flags & DMA_COMPL_SKIP_DEST_UNMAP)) {
+ if (txd->tx.flags & DMA_COMPL_DEST_UNMAP_SINGLE)
+ dma_unmap_single(dev, txd->dst_addr, txd->len,
+ DMA_FROM_DEVICE);
+ else
+ dma_unmap_page(dev, txd->dst_addr, txd->len,
+ DMA_FROM_DEVICE);
+ }
+}
+
static void pl08x_tasklet(unsigned long data)
{
struct pl08x_dma_chan *plchan = (struct pl08x_dma_chan *) data;
- struct pl08x_phy_chan *phychan = plchan->phychan;
struct pl08x_driver_data *pl08x = plchan->host;
+ struct pl08x_txd *txd;
+ unsigned long flags;
- if (!plchan)
- BUG();
-
- spin_lock(&plchan->lock);
-
- if (plchan->at) {
- dma_async_tx_callback callback =
- plchan->at->tx.callback;
- void *callback_param =
- plchan->at->tx.callback_param;
-
- /*
- * Update last completed
- */
- plchan->lc =
- (plchan->at->tx.cookie);
-
- /*
- * Callback to signal completion
- */
- if (callback)
- callback(callback_param);
+ spin_lock_irqsave(&plchan->lock, flags);
- /*
- * Device callbacks should NOT clear
- * the current transaction on the channel
- * Linus: sometimes they should?
- */
- if (!plchan->at)
- BUG();
+ txd = plchan->at;
+ plchan->at = NULL;
- /*
- * Free the descriptor if it's not for a device
- * using a circular buffer
- */
- if (!plchan->at->cd->circular_buffer) {
- pl08x_free_txd(pl08x, plchan->at);
- plchan->at = NULL;
- }
- /*
- * else descriptor for circular
- * buffers only freed when
- * client has disabled dma
- */
+ if (txd) {
+ /* Update last completed */
+ plchan->lc = txd->tx.cookie;
}
- /*
- * If a new descriptor is queued, set it up
- * plchan->at is NULL here
- */
- if (!list_empty(&plchan->desc_list)) {
+
+ /* If a new descriptor is queued, set it up plchan->at is NULL here */
+ if (!list_empty(&plchan->pend_list)) {
struct pl08x_txd *next;
- next = list_first_entry(&plchan->desc_list,
+ next = list_first_entry(&plchan->pend_list,
struct pl08x_txd,
node);
list_del(&next->node);
- plchan->at = next;
- /* Configure the physical channel for the next txd */
- pl08x_config_phychan_for_txd(plchan);
- pl08x_set_cregs(pl08x, plchan->phychan);
- pl08x_enable_phy_chan(pl08x, plchan->phychan);
+
+ pl08x_start_txd(plchan, next);
+ } else if (plchan->phychan_hold) {
+ /*
+ * This channel is still in use - we have a new txd being
+ * prepared and will soon be queued. Don't give up the
+ * physical channel.
+ */
} else {
struct pl08x_dma_chan *waiting = NULL;
* No more jobs, so free up the physical channel
* Free any allocated signal on slave transfers too
*/
- if ((phychan->signal >= 0) && pl08x->pd->put_signal) {
- pl08x->pd->put_signal(plchan);
- phychan->signal = -1;
- }
- pl08x_put_phy_channel(pl08x, phychan);
- plchan->phychan = NULL;
+ release_phy_channel(plchan);
plchan->state = PL08X_CHAN_IDLE;
/*
- * And NOW before anyone else can grab that free:d
- * up physical channel, see if there is some memcpy
- * pending that seriously needs to start because of
- * being stacked up while we were choking the
- * physical channels with data.
+ * And NOW before anyone else can grab that free:d up
+ * physical channel, see if there is some memcpy pending
+ * that seriously needs to start because of being stacked
+ * up while we were choking the physical channels with data.
*/
list_for_each_entry(waiting, &pl08x->memcpy.channels,
chan.device_node) {
ret = prep_phy_channel(waiting,
waiting->waiting);
BUG_ON(ret);
+ waiting->phychan_hold--;
waiting->state = PL08X_CHAN_RUNNING;
waiting->waiting = NULL;
pl08x_issue_pending(&waiting->chan);
}
}
- spin_unlock(&plchan->lock);
+ spin_unlock_irqrestore(&plchan->lock, flags);
+
+ if (txd) {
+ dma_async_tx_callback callback = txd->tx.callback;
+ void *callback_param = txd->tx.callback_param;
+
+ /* Don't try to unmap buffers on slave channels */
+ if (!plchan->slave)
+ pl08x_unmap_buffers(txd);
+
+ /* Free the descriptor */
+ spin_lock_irqsave(&plchan->lock, flags);
+ pl08x_free_txd(pl08x, txd);
+ spin_unlock_irqrestore(&plchan->lock, flags);
+
+ /* Callback to signal completion */
+ if (callback)
+ callback(callback_param);
+ }
}
static irqreturn_t pl08x_irq(int irq, void *dev)
val = readl(pl08x->base + PL080_ERR_STATUS);
if (val) {
- /*
- * An error interrupt (on one or more channels)
- */
+ /* An error interrupt (on one or more channels) */
dev_err(&pl08x->adev->dev,
"%s error interrupt, register value 0x%08x\n",
__func__, val);
mask |= (1 << i);
}
}
- /*
- * Clear only the terminal interrupts on channels we processed
- */
+ /* Clear only the terminal interrupts on channels we processed */
writel(mask, pl08x->base + PL080_TC_CLEAR);
return mask ? IRQ_HANDLED : IRQ_NONE;
int i;
INIT_LIST_HEAD(&dmadev->channels);
+
/*
* Register as many many memcpy as we have physical channels,
* we won't always be able to use all but the code will have
return -ENOMEM;
}
}
+ if (chan->cd->circular_buffer) {
+ dev_err(&pl08x->adev->dev,
+ "channel %s: circular buffers not supported\n",
+ chan->name);
+ kfree(chan);
+ continue;
+ }
dev_info(&pl08x->adev->dev,
"initialize virtual channel \"%s\"\n",
chan->name);
chan->chan.device = dmadev;
- atomic_set(&chan->last_issued, 0);
- chan->lc = atomic_read(&chan->last_issued);
+ chan->chan.cookie = 0;
+ chan->lc = 0;
spin_lock_init(&chan->lock);
- INIT_LIST_HEAD(&chan->desc_list);
+ INIT_LIST_HEAD(&chan->pend_list);
tasklet_init(&chan->tasklet, pl08x_tasklet,
(unsigned long) chan);
seq_printf(s, "CHANNEL:\tSTATE:\n");
seq_printf(s, "--------\t------\n");
list_for_each_entry(chan, &pl08x->memcpy.channels, chan.device_node) {
- seq_printf(s, "%s\t\t\%s\n", chan->name,
+ seq_printf(s, "%s\t\t%s\n", chan->name,
pl08x_state_str(chan->state));
}
seq_printf(s, "CHANNEL:\tSTATE:\n");
seq_printf(s, "--------\t------\n");
list_for_each_entry(chan, &pl08x->slave.channels, chan.device_node) {
- seq_printf(s, "%s\t\t\%s\n", chan->name,
+ seq_printf(s, "%s\t\t%s\n", chan->name,
pl08x_state_str(chan->state));
}
static int pl08x_probe(struct amba_device *adev, struct amba_id *id)
{
struct pl08x_driver_data *pl08x;
- struct vendor_data *vd = id->data;
+ const struct vendor_data *vd = id->data;
int ret = 0;
int i;
pl08x->adev = adev;
pl08x->vd = vd;
+ /* By default, AHB1 only. If dualmaster, from platform */
+ pl08x->lli_buses = PL08X_AHB1;
+ pl08x->mem_buses = PL08X_AHB1;
+ if (pl08x->vd->dualmaster) {
+ pl08x->lli_buses = pl08x->pd->lli_buses;
+ pl08x->mem_buses = pl08x->pd->mem_buses;
+ }
+
/* A DMA memory pool for LLIs, align on 1-byte boundary */
pl08x->pool = dma_pool_create(DRIVER_NAME, &pl08x->adev->dev,
PL08X_LLI_TSFR_SIZE, PL08X_ALIGN, 0);
/* Turn on the PL08x */
pl08x_ensure_on(pl08x);
- /*
- * Attach the interrupt handler
- */
+ /* Attach the interrupt handler */
writel(0x000000FF, pl08x->base + PL080_ERR_CLEAR);
writel(0x000000FF, pl08x->base + PL080_TC_CLEAR);
ret = request_irq(adev->irq[0], pl08x_irq, IRQF_DISABLED,
- vd->name, pl08x);
+ DRIVER_NAME, pl08x);
if (ret) {
dev_err(&adev->dev, "%s failed to request interrupt %d\n",
__func__, adev->irq[0]);
amba_set_drvdata(adev, pl08x);
init_pl08x_debugfs(pl08x);
- dev_info(&pl08x->adev->dev, "ARM(R) %s DMA block initialized @%08x\n",
- vd->name, adev->res.start);
+ dev_info(&pl08x->adev->dev, "DMA: PL%03x rev%u at 0x%08llx irq %d\n",
+ amba_part(adev), amba_rev(adev),
+ (unsigned long long)adev->res.start, adev->irq[0]);
return 0;
out_no_slave_reg:
/* PL080 has 8 channels and the PL080 have just 2 */
static struct vendor_data vendor_pl080 = {
- .name = "PL080",
.channels = 8,
.dualmaster = true,
};
static struct vendor_data vendor_pl081 = {
- .name = "PL081",
.channels = 2,
.dualmaster = false,
};
retval = amba_driver_register(&pl08x_amba_driver);
if (retval)
printk(KERN_WARNING DRIVER_NAME
- "failed to register as an amba device (%d)\n",
+ "failed to register as an AMBA device (%d)\n",
retval);
return retval;
}
/* move myself to free_list */
list_move(&desc->desc_node, &atchan->free_list);
- /* unmap dma addresses */
+ /* unmap dma addresses (not on slave channels) */
if (!atchan->chan_common.private) {
struct device *parent = chan2parent(&atchan->chan_common);
if (!(txd->flags & DMA_COMPL_SKIP_DEST_UNMAP)) {
desc->lli.ctrlb = ctrlb;
desc->txd.cookie = 0;
- async_tx_ack(&desc->txd);
if (!first) {
first = desc;
/* set end-of-link to the last link descriptor of list*/
set_desc_eol(desc);
- desc->txd.flags = flags; /* client is in control of this ack */
+ first->txd.flags = flags; /* client is in control of this ack */
return &first->txd;
if (!desc)
goto err_desc_get;
- mem = sg_phys(sg);
+ mem = sg_dma_address(sg);
len = sg_dma_len(sg);
mem_width = 2;
if (unlikely(mem & 3 || len & 3))
if (!desc)
goto err_desc_get;
- mem = sg_phys(sg);
+ mem = sg_dma_address(sg);
len = sg_dma_len(sg);
mem_width = 2;
if (unlikely(mem & 3 || len & 3))
first->txd.cookie = -EBUSY;
first->len = total_len;
- /* last link descriptor of list is responsible of flags */
- prev->txd.flags = flags; /* client is in control of this ack */
+ /* first link descriptor of list is responsible of flags */
+ first->txd.flags = flags; /* client is in control of this ack */
return &first->txd;
dev_vdbg(chan2dev(chan), "issue_pending\n");
+ spin_lock_bh(&atchan->lock);
if (!atc_chan_is_enabled(atchan)) {
- spin_lock_bh(&atchan->lock);
atc_advance_work(atchan);
- spin_unlock_bh(&atchan->lock);
}
+ spin_unlock_bh(&atchan->lock);
}
/**
{
return platform_driver_probe(&at_dma_driver, at_dma_probe);
}
-module_init(at_dma_init);
+subsys_initcall(at_dma_init);
static void __exit at_dma_exit(void)
{
/*
* Freescale MPC85xx, MPC83xx DMA Engine support
*
- * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
+ * Copyright (C) 2007-2010 Freescale Semiconductor, Inc. All rights reserved.
*
* Author:
* Zhang Wei <wei.zhang@freescale.com>, Jul 2007
fdev->common.device_control = fsl_dma_device_control;
fdev->common.dev = &op->dev;
+ dma_set_mask(&(op->dev), DMA_BIT_MASK(36));
+
dev_set_drvdata(&op->dev, fdev);
/*
/*calculate CTL_LO*/
ctl_lo.ctl_lo = 0;
ctl_lo.ctlx.int_en = 1;
- ctl_lo.ctlx.dst_tr_width = mids->dma_slave.dst_addr_width;
- ctl_lo.ctlx.src_tr_width = mids->dma_slave.src_addr_width;
ctl_lo.ctlx.dst_msize = mids->dma_slave.src_maxburst;
ctl_lo.ctlx.src_msize = mids->dma_slave.dst_maxburst;
+ /*
+ * Here we need some translation from "enum dma_slave_buswidth"
+ * to the format for our dma controller
+ * standard intel_mid_dmac's format
+ * 1 Byte 0b000
+ * 2 Bytes 0b001
+ * 4 Bytes 0b010
+ */
+ ctl_lo.ctlx.dst_tr_width = mids->dma_slave.dst_addr_width / 2;
+ ctl_lo.ctlx.src_tr_width = mids->dma_slave.src_addr_width / 2;
+
if (mids->cfg_mode == LNW_DMA_MEM_TO_MEM) {
ctl_lo.ctlx.tt_fc = 0;
ctl_lo.ctlx.sinc = 0;
BUG_ON(!mids);
if (!midc->dma->pimr_mask) {
- pr_debug("MDMA: SG list is not supported by this controller\n");
- return NULL;
+ /* We can still handle sg list with only one item */
+ if (sg_len == 1) {
+ txd = intel_mid_dma_prep_memcpy(chan,
+ mids->dma_slave.dst_addr,
+ mids->dma_slave.src_addr,
+ sgl->length,
+ flags);
+ return txd;
+ } else {
+ pr_warn("MDMA: SG list is not supported by this controller\n");
+ return NULL;
+ }
}
pr_debug("MDMA: SG Length = %d, direction = %d, Flags = %#lx\n",
pr_err("MDMA: Prep memcpy failed\n");
return NULL;
}
+
desc = to_intel_mid_dma_desc(txd);
desc->dirn = direction;
ctl_lo.ctl_lo = desc->ctl_lo;
/*DMA Interrupt*/
pr_debug("MDMA:Got an interrupt on irq %d\n", irq);
- if (!mid) {
- pr_err("ERR_MDMA:null pointer mid\n");
- return -EINVAL;
- }
-
pr_debug("MDMA: Status %x, Mask %x\n", tfr_status, mid->intr_mask);
tfr_status &= mid->intr_mask;
if (tfr_status) {
return err;
}
-#ifdef CONFIG_MD_RAID6_PQ
+#ifdef CONFIG_RAID6_PQ
static int __devinit
iop_adma_pq_zero_sum_self_test(struct iop_adma_device *device)
{
if (dma_has_cap(DMA_PQ, dma_dev->cap_mask) &&
dma_has_cap(DMA_PQ_VAL, dma_dev->cap_mask)) {
- #ifdef CONFIG_MD_RAID6_PQ
+ #ifdef CONFIG_RAID6_PQ
ret = iop_adma_pq_zero_sum_self_test(adev);
dev_dbg(&pdev->dev, "pq self test returned %d\n", ret);
#else
/*
* Topcliff PCH DMA controller driver
* Copyright (c) 2010 Intel Corporation
+ * Copyright (C) 2011 OKI SEMICONDUCTOR CO., LTD.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
}
/* PCI Device ID of DMA device */
-#define PCI_DEVICE_ID_PCH_DMA_8CH 0x8810
-#define PCI_DEVICE_ID_PCH_DMA_4CH 0x8815
+#define PCI_VENDOR_ID_ROHM 0x10DB
+#define PCI_DEVICE_ID_EG20T_PCH_DMA_8CH 0x8810
+#define PCI_DEVICE_ID_EG20T_PCH_DMA_4CH 0x8815
+#define PCI_DEVICE_ID_ML7213_DMA1_8CH 0x8026
+#define PCI_DEVICE_ID_ML7213_DMA2_8CH 0x802B
+#define PCI_DEVICE_ID_ML7213_DMA3_4CH 0x8034
static const struct pci_device_id pch_dma_id_table[] = {
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_PCH_DMA_8CH), 8 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_PCH_DMA_4CH), 4 },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_EG20T_PCH_DMA_8CH), 8 },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_EG20T_PCH_DMA_4CH), 4 },
+ { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7213_DMA1_8CH), 8}, /* UART Video */
+ { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7213_DMA2_8CH), 8}, /* PCMIF SPI */
+ { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7213_DMA3_4CH), 4}, /* FPGA */
{ 0, },
};
module_init(pch_dma_init);
module_exit(pch_dma_exit);
-MODULE_DESCRIPTION("Topcliff PCH DMA controller driver");
+MODULE_DESCRIPTION("Intel EG20T PCH / OKI SEMICONDUCTOR ML7213 IOH "
+ "DMA controller driver");
MODULE_AUTHOR("Yong Wang <yong.y.wang@intel.com>");
MODULE_LICENSE("GPL v2");
/*
- * Copyright (C) ST-Ericsson SA 2007-2010
+ * Copyright (C) Ericsson AB 2007-2008
+ * Copyright (C) ST-Ericsson SA 2008-2010
* Author: Per Forlin <per.forlin@stericsson.com> for ST-Ericsson
* Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson
* License terms: GNU General Public License (GPL) version 2
return d;
}
-/* Support functions for logical channels */
+static int d40_psize_2_burst_size(bool is_log, int psize)
+{
+ if (is_log) {
+ if (psize == STEDMA40_PSIZE_LOG_1)
+ return 1;
+ } else {
+ if (psize == STEDMA40_PSIZE_PHY_1)
+ return 1;
+ }
+
+ return 2 << psize;
+}
+
+/*
+ * The dma only supports transmitting packages up to
+ * STEDMA40_MAX_SEG_SIZE << data_width. Calculate the total number of
+ * dma elements required to send the entire sg list
+ */
+static int d40_size_2_dmalen(int size, u32 data_width1, u32 data_width2)
+{
+ int dmalen;
+ u32 max_w = max(data_width1, data_width2);
+ u32 min_w = min(data_width1, data_width2);
+ u32 seg_max = ALIGN(STEDMA40_MAX_SEG_SIZE << min_w, 1 << max_w);
+
+ if (seg_max > STEDMA40_MAX_SEG_SIZE)
+ seg_max -= (1 << max_w);
+
+ if (!IS_ALIGNED(size, 1 << max_w))
+ return -EINVAL;
+
+ if (size <= seg_max)
+ dmalen = 1;
+ else {
+ dmalen = size / seg_max;
+ if (dmalen * seg_max < size)
+ dmalen++;
+ }
+ return dmalen;
+}
+
+static int d40_sg_2_dmalen(struct scatterlist *sgl, int sg_len,
+ u32 data_width1, u32 data_width2)
+{
+ struct scatterlist *sg;
+ int i;
+ int len = 0;
+ int ret;
+
+ for_each_sg(sgl, sg, sg_len, i) {
+ ret = d40_size_2_dmalen(sg_dma_len(sg),
+ data_width1, data_width2);
+ if (ret < 0)
+ return ret;
+ len += ret;
+ }
+ return len;
+}
+/* Support functions for logical channels */
static int d40_channel_execute_command(struct d40_chan *d40c,
enum d40_command command)
res = -EINVAL;
}
+ if (d40_psize_2_burst_size(is_log, conf->src_info.psize) *
+ (1 << conf->src_info.data_width) !=
+ d40_psize_2_burst_size(is_log, conf->dst_info.psize) *
+ (1 << conf->dst_info.data_width)) {
+ /*
+ * The DMAC hardware only supports
+ * src (burst x width) == dst (burst x width)
+ */
+
+ dev_err(&d40c->chan.dev->device,
+ "[%s] src (burst x width) != dst (burst x width)\n",
+ __func__);
+ res = -EINVAL;
+ }
+
return res;
}
if (d40d == NULL)
goto err;
- d40d->lli_len = sgl_len;
+ d40d->lli_len = d40_sg_2_dmalen(sgl_dst, sgl_len,
+ d40c->dma_cfg.src_info.data_width,
+ d40c->dma_cfg.dst_info.data_width);
+ if (d40d->lli_len < 0) {
+ dev_err(&d40c->chan.dev->device,
+ "[%s] Unaligned size\n", __func__);
+ goto err;
+ }
+
d40d->lli_current = 0;
d40d->txd.flags = dma_flags;
if (d40c->log_num != D40_PHY_CHAN) {
- if (d40_pool_lli_alloc(d40d, sgl_len, true) < 0) {
+ if (d40_pool_lli_alloc(d40d, d40d->lli_len, true) < 0) {
dev_err(&d40c->chan.dev->device,
"[%s] Out of memory\n", __func__);
goto err;
sgl_len,
d40d->lli_log.src,
d40c->log_def.lcsp1,
- d40c->dma_cfg.src_info.data_width);
+ d40c->dma_cfg.src_info.data_width,
+ d40c->dma_cfg.dst_info.data_width);
(void) d40_log_sg_to_lli(sgl_dst,
sgl_len,
d40d->lli_log.dst,
d40c->log_def.lcsp3,
- d40c->dma_cfg.dst_info.data_width);
+ d40c->dma_cfg.dst_info.data_width,
+ d40c->dma_cfg.src_info.data_width);
} else {
- if (d40_pool_lli_alloc(d40d, sgl_len, false) < 0) {
+ if (d40_pool_lli_alloc(d40d, d40d->lli_len, false) < 0) {
dev_err(&d40c->chan.dev->device,
"[%s] Out of memory\n", __func__);
goto err;
virt_to_phys(d40d->lli_phy.src),
d40c->src_def_cfg,
d40c->dma_cfg.src_info.data_width,
+ d40c->dma_cfg.dst_info.data_width,
d40c->dma_cfg.src_info.psize);
if (res < 0)
virt_to_phys(d40d->lli_phy.dst),
d40c->dst_def_cfg,
d40c->dma_cfg.dst_info.data_width,
+ d40c->dma_cfg.src_info.data_width,
d40c->dma_cfg.dst_info.psize);
if (res < 0)
struct d40_chan *d40c = container_of(chan, struct d40_chan,
chan);
unsigned long flags;
- int err = 0;
if (d40c->phy_chan == NULL) {
dev_err(&d40c->chan.dev->device,
}
d40d->txd.flags = dma_flags;
+ d40d->lli_len = d40_size_2_dmalen(size,
+ d40c->dma_cfg.src_info.data_width,
+ d40c->dma_cfg.dst_info.data_width);
+ if (d40d->lli_len < 0) {
+ dev_err(&d40c->chan.dev->device,
+ "[%s] Unaligned size\n", __func__);
+ goto err;
+ }
+
dma_async_tx_descriptor_init(&d40d->txd, chan);
if (d40c->log_num != D40_PHY_CHAN) {
- if (d40_pool_lli_alloc(d40d, 1, true) < 0) {
+ if (d40_pool_lli_alloc(d40d, d40d->lli_len, true) < 0) {
dev_err(&d40c->chan.dev->device,
"[%s] Out of memory\n", __func__);
goto err;
}
- d40d->lli_len = 1;
d40d->lli_current = 0;
- d40_log_fill_lli(d40d->lli_log.src,
- src,
- size,
- d40c->log_def.lcsp1,
- d40c->dma_cfg.src_info.data_width,
- true);
+ if (d40_log_buf_to_lli(d40d->lli_log.src,
+ src,
+ size,
+ d40c->log_def.lcsp1,
+ d40c->dma_cfg.src_info.data_width,
+ d40c->dma_cfg.dst_info.data_width,
+ true) == NULL)
+ goto err;
- d40_log_fill_lli(d40d->lli_log.dst,
- dst,
- size,
- d40c->log_def.lcsp3,
- d40c->dma_cfg.dst_info.data_width,
- true);
+ if (d40_log_buf_to_lli(d40d->lli_log.dst,
+ dst,
+ size,
+ d40c->log_def.lcsp3,
+ d40c->dma_cfg.dst_info.data_width,
+ d40c->dma_cfg.src_info.data_width,
+ true) == NULL)
+ goto err;
} else {
- if (d40_pool_lli_alloc(d40d, 1, false) < 0) {
+ if (d40_pool_lli_alloc(d40d, d40d->lli_len, false) < 0) {
dev_err(&d40c->chan.dev->device,
"[%s] Out of memory\n", __func__);
goto err;
}
- err = d40_phy_fill_lli(d40d->lli_phy.src,
+ if (d40_phy_buf_to_lli(d40d->lli_phy.src,
src,
size,
d40c->dma_cfg.src_info.psize,
d40c->src_def_cfg,
true,
d40c->dma_cfg.src_info.data_width,
- false);
- if (err)
- goto err_fill_lli;
+ d40c->dma_cfg.dst_info.data_width,
+ false) == NULL)
+ goto err;
- err = d40_phy_fill_lli(d40d->lli_phy.dst,
+ if (d40_phy_buf_to_lli(d40d->lli_phy.dst,
dst,
size,
d40c->dma_cfg.dst_info.psize,
d40c->dst_def_cfg,
true,
d40c->dma_cfg.dst_info.data_width,
- false);
-
- if (err)
- goto err_fill_lli;
+ d40c->dma_cfg.src_info.data_width,
+ false) == NULL)
+ goto err;
(void) dma_map_single(d40c->base->dev, d40d->lli_phy.src,
d40d->lli_pool.size, DMA_TO_DEVICE);
spin_unlock_irqrestore(&d40c->lock, flags);
return &d40d->txd;
-err_fill_lli:
- dev_err(&d40c->chan.dev->device,
- "[%s] Failed filling in PHY LLI\n", __func__);
err:
if (d40d)
d40_desc_free(d40c, d40d);
dma_addr_t dev_addr = 0;
int total_size;
- if (d40_pool_lli_alloc(d40d, sg_len, true) < 0) {
+ d40d->lli_len = d40_sg_2_dmalen(sgl, sg_len,
+ d40c->dma_cfg.src_info.data_width,
+ d40c->dma_cfg.dst_info.data_width);
+ if (d40d->lli_len < 0) {
+ dev_err(&d40c->chan.dev->device,
+ "[%s] Unaligned size\n", __func__);
+ return -EINVAL;
+ }
+
+ if (d40_pool_lli_alloc(d40d, d40d->lli_len, true) < 0) {
dev_err(&d40c->chan.dev->device,
"[%s] Out of memory\n", __func__);
return -ENOMEM;
}
- d40d->lli_len = sg_len;
d40d->lli_current = 0;
if (direction == DMA_FROM_DEVICE)
dma_addr_t dst_dev_addr;
int res;
- if (d40_pool_lli_alloc(d40d, sgl_len, false) < 0) {
+ d40d->lli_len = d40_sg_2_dmalen(sgl, sgl_len,
+ d40c->dma_cfg.src_info.data_width,
+ d40c->dma_cfg.dst_info.data_width);
+ if (d40d->lli_len < 0) {
+ dev_err(&d40c->chan.dev->device,
+ "[%s] Unaligned size\n", __func__);
+ return -EINVAL;
+ }
+
+ if (d40_pool_lli_alloc(d40d, d40d->lli_len, false) < 0) {
dev_err(&d40c->chan.dev->device,
"[%s] Out of memory\n", __func__);
return -ENOMEM;
}
- d40d->lli_len = sgl_len;
d40d->lli_current = 0;
if (direction == DMA_FROM_DEVICE) {
virt_to_phys(d40d->lli_phy.src),
d40c->src_def_cfg,
d40c->dma_cfg.src_info.data_width,
+ d40c->dma_cfg.dst_info.data_width,
d40c->dma_cfg.src_info.psize);
if (res < 0)
return res;
virt_to_phys(d40d->lli_phy.dst),
d40c->dst_def_cfg,
d40c->dma_cfg.dst_info.data_width,
+ d40c->dma_cfg.src_info.data_width,
d40c->dma_cfg.dst_info.psize);
if (res < 0)
return res;
psize = STEDMA40_PSIZE_PHY_8;
else if (config_maxburst >= 4)
psize = STEDMA40_PSIZE_PHY_4;
+ else if (config_maxburst >= 2)
+ psize = STEDMA40_PSIZE_PHY_2;
else
psize = STEDMA40_PSIZE_PHY_1;
}
/*
* Copyright (C) ST-Ericsson SA 2007-2010
- * Author: Per Friden <per.friden@stericsson.com> for ST-Ericsson
+ * Author: Per Forlin <per.forlin@stericsson.com> for ST-Ericsson
* Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson
* License terms: GNU General Public License (GPL) version 2
*/
*dst_cfg = dst;
}
-int d40_phy_fill_lli(struct d40_phy_lli *lli,
- dma_addr_t data,
- u32 data_size,
- int psize,
- dma_addr_t next_lli,
- u32 reg_cfg,
- bool term_int,
- u32 data_width,
- bool is_device)
+static int d40_phy_fill_lli(struct d40_phy_lli *lli,
+ dma_addr_t data,
+ u32 data_size,
+ int psize,
+ dma_addr_t next_lli,
+ u32 reg_cfg,
+ bool term_int,
+ u32 data_width,
+ bool is_device)
{
int num_elems;
else
num_elems = 2 << psize;
- /*
- * Size is 16bit. data_width is 8, 16, 32 or 64 bit
- * Block large than 64 KiB must be split.
- */
- if (data_size > (0xffff << data_width))
- return -EINVAL;
-
/* Must be aligned */
if (!IS_ALIGNED(data, 0x1 << data_width))
return -EINVAL;
return 0;
}
+static int d40_seg_size(int size, int data_width1, int data_width2)
+{
+ u32 max_w = max(data_width1, data_width2);
+ u32 min_w = min(data_width1, data_width2);
+ u32 seg_max = ALIGN(STEDMA40_MAX_SEG_SIZE << min_w, 1 << max_w);
+
+ if (seg_max > STEDMA40_MAX_SEG_SIZE)
+ seg_max -= (1 << max_w);
+
+ if (size <= seg_max)
+ return size;
+
+ if (size <= 2 * seg_max)
+ return ALIGN(size / 2, 1 << max_w);
+
+ return seg_max;
+}
+
+struct d40_phy_lli *d40_phy_buf_to_lli(struct d40_phy_lli *lli,
+ dma_addr_t addr,
+ u32 size,
+ int psize,
+ dma_addr_t lli_phys,
+ u32 reg_cfg,
+ bool term_int,
+ u32 data_width1,
+ u32 data_width2,
+ bool is_device)
+{
+ int err;
+ dma_addr_t next = lli_phys;
+ int size_rest = size;
+ int size_seg = 0;
+
+ do {
+ size_seg = d40_seg_size(size_rest, data_width1, data_width2);
+ size_rest -= size_seg;
+
+ if (term_int && size_rest == 0)
+ next = 0;
+ else
+ next = ALIGN(next + sizeof(struct d40_phy_lli),
+ D40_LLI_ALIGN);
+
+ err = d40_phy_fill_lli(lli,
+ addr,
+ size_seg,
+ psize,
+ next,
+ reg_cfg,
+ !next,
+ data_width1,
+ is_device);
+
+ if (err)
+ goto err;
+
+ lli++;
+ if (!is_device)
+ addr += size_seg;
+ } while (size_rest);
+
+ return lli;
+
+ err:
+ return NULL;
+}
+
int d40_phy_sg_to_lli(struct scatterlist *sg,
int sg_len,
dma_addr_t target,
- struct d40_phy_lli *lli,
+ struct d40_phy_lli *lli_sg,
dma_addr_t lli_phys,
u32 reg_cfg,
- u32 data_width,
+ u32 data_width1,
+ u32 data_width2,
int psize)
{
int total_size = 0;
int i;
struct scatterlist *current_sg = sg;
- dma_addr_t next_lli_phys;
dma_addr_t dst;
- int err = 0;
+ struct d40_phy_lli *lli = lli_sg;
+ dma_addr_t l_phys = lli_phys;
for_each_sg(sg, current_sg, sg_len, i) {
total_size += sg_dma_len(current_sg);
- /* If this scatter list entry is the last one, no next link */
- if (sg_len - 1 == i)
- next_lli_phys = 0;
- else
- next_lli_phys = ALIGN(lli_phys + (i + 1) *
- sizeof(struct d40_phy_lli),
- D40_LLI_ALIGN);
-
if (target)
dst = target;
else
dst = sg_phys(current_sg);
- err = d40_phy_fill_lli(&lli[i],
- dst,
- sg_dma_len(current_sg),
- psize,
- next_lli_phys,
- reg_cfg,
- !next_lli_phys,
- data_width,
- target == dst);
- if (err)
- goto err;
+ l_phys = ALIGN(lli_phys + (lli - lli_sg) *
+ sizeof(struct d40_phy_lli), D40_LLI_ALIGN);
+
+ lli = d40_phy_buf_to_lli(lli,
+ dst,
+ sg_dma_len(current_sg),
+ psize,
+ l_phys,
+ reg_cfg,
+ sg_len - 1 == i,
+ data_width1,
+ data_width2,
+ target == dst);
+ if (lli == NULL)
+ return -EINVAL;
}
return total_size;
-err:
- return err;
}
writel(lli_dst->lcsp13, &lcla[1].lcsp13);
}
-void d40_log_fill_lli(struct d40_log_lli *lli,
- dma_addr_t data, u32 data_size,
- u32 reg_cfg,
- u32 data_width,
- bool addr_inc)
+static void d40_log_fill_lli(struct d40_log_lli *lli,
+ dma_addr_t data, u32 data_size,
+ u32 reg_cfg,
+ u32 data_width,
+ bool addr_inc)
{
lli->lcsp13 = reg_cfg;
/* The number of elements to transfer */
lli->lcsp02 = ((data_size >> data_width) <<
D40_MEM_LCSP0_ECNT_POS) & D40_MEM_LCSP0_ECNT_MASK;
+
+ BUG_ON((data_size >> data_width) > STEDMA40_MAX_SEG_SIZE);
+
/* 16 LSBs address of the current element */
lli->lcsp02 |= data & D40_MEM_LCSP0_SPTR_MASK;
/* 16 MSBs address of the current element */
int total_size = 0;
struct scatterlist *current_sg = sg;
int i;
+ struct d40_log_lli *lli_src = lli->src;
+ struct d40_log_lli *lli_dst = lli->dst;
for_each_sg(sg, current_sg, sg_len, i) {
total_size += sg_dma_len(current_sg);
if (direction == DMA_TO_DEVICE) {
- d40_log_fill_lli(&lli->src[i],
- sg_phys(current_sg),
- sg_dma_len(current_sg),
- lcsp->lcsp1, src_data_width,
- true);
- d40_log_fill_lli(&lli->dst[i],
- dev_addr,
- sg_dma_len(current_sg),
- lcsp->lcsp3, dst_data_width,
- false);
+ lli_src =
+ d40_log_buf_to_lli(lli_src,
+ sg_phys(current_sg),
+ sg_dma_len(current_sg),
+ lcsp->lcsp1, src_data_width,
+ dst_data_width,
+ true);
+ lli_dst =
+ d40_log_buf_to_lli(lli_dst,
+ dev_addr,
+ sg_dma_len(current_sg),
+ lcsp->lcsp3, dst_data_width,
+ src_data_width,
+ false);
} else {
- d40_log_fill_lli(&lli->dst[i],
- sg_phys(current_sg),
- sg_dma_len(current_sg),
- lcsp->lcsp3, dst_data_width,
- true);
- d40_log_fill_lli(&lli->src[i],
- dev_addr,
- sg_dma_len(current_sg),
- lcsp->lcsp1, src_data_width,
- false);
+ lli_dst =
+ d40_log_buf_to_lli(lli_dst,
+ sg_phys(current_sg),
+ sg_dma_len(current_sg),
+ lcsp->lcsp3, dst_data_width,
+ src_data_width,
+ true);
+ lli_src =
+ d40_log_buf_to_lli(lli_src,
+ dev_addr,
+ sg_dma_len(current_sg),
+ lcsp->lcsp1, src_data_width,
+ dst_data_width,
+ false);
}
}
return total_size;
}
+struct d40_log_lli *d40_log_buf_to_lli(struct d40_log_lli *lli_sg,
+ dma_addr_t addr,
+ int size,
+ u32 lcsp13, /* src or dst*/
+ u32 data_width1,
+ u32 data_width2,
+ bool addr_inc)
+{
+ struct d40_log_lli *lli = lli_sg;
+ int size_rest = size;
+ int size_seg = 0;
+
+ do {
+ size_seg = d40_seg_size(size_rest, data_width1, data_width2);
+ size_rest -= size_seg;
+
+ d40_log_fill_lli(lli,
+ addr,
+ size_seg,
+ lcsp13, data_width1,
+ addr_inc);
+ if (addr_inc)
+ addr += size_seg;
+ lli++;
+ } while (size_rest);
+
+ return lli;
+}
+
int d40_log_sg_to_lli(struct scatterlist *sg,
int sg_len,
struct d40_log_lli *lli_sg,
u32 lcsp13, /* src or dst*/
- u32 data_width)
+ u32 data_width1, u32 data_width2)
{
int total_size = 0;
struct scatterlist *current_sg = sg;
int i;
+ struct d40_log_lli *lli = lli_sg;
for_each_sg(sg, current_sg, sg_len, i) {
total_size += sg_dma_len(current_sg);
-
- d40_log_fill_lli(&lli_sg[i],
- sg_phys(current_sg),
- sg_dma_len(current_sg),
- lcsp13, data_width,
- true);
+ lli = d40_log_buf_to_lli(lli,
+ sg_phys(current_sg),
+ sg_dma_len(current_sg),
+ lcsp13,
+ data_width1, data_width2, true);
}
return total_size;
}
struct d40_phy_lli *lli,
dma_addr_t lli_phys,
u32 reg_cfg,
- u32 data_width,
+ u32 data_width1,
+ u32 data_width2,
int psize);
-int d40_phy_fill_lli(struct d40_phy_lli *lli,
- dma_addr_t data,
- u32 data_size,
- int psize,
- dma_addr_t next_lli,
- u32 reg_cfg,
- bool term_int,
- u32 data_width,
- bool is_device);
+struct d40_phy_lli *d40_phy_buf_to_lli(struct d40_phy_lli *lli,
+ dma_addr_t data,
+ u32 data_size,
+ int psize,
+ dma_addr_t next_lli,
+ u32 reg_cfg,
+ bool term_int,
+ u32 data_width1,
+ u32 data_width2,
+ bool is_device);
void d40_phy_lli_write(void __iomem *virtbase,
u32 phy_chan_num,
/* Logical channels */
-void d40_log_fill_lli(struct d40_log_lli *lli,
- dma_addr_t data,
- u32 data_size,
- u32 reg_cfg,
- u32 data_width,
- bool addr_inc);
+struct d40_log_lli *d40_log_buf_to_lli(struct d40_log_lli *lli_sg,
+ dma_addr_t addr,
+ int size,
+ u32 lcsp13, /* src or dst*/
+ u32 data_width1, u32 data_width2,
+ bool addr_inc);
int d40_log_sg_to_dev(struct scatterlist *sg,
int sg_len,
int sg_len,
struct d40_log_lli *lli_sg,
u32 lcsp13, /* src or dst*/
- u32 data_width);
+ u32 data_width1, u32 data_width2);
void d40_log_lli_lcpa_write(struct d40_log_lli_full *lcpa,
struct d40_log_lli *lli_dst,
#define NVOBJ_FLAG_ZERO_ALLOC (1 << 1)
#define NVOBJ_FLAG_ZERO_FREE (1 << 2)
#define NVOBJ_FLAG_VM (1 << 3)
+#define NVOBJ_FLAG_VM_USER (1 << 4)
#define NVOBJ_CINST_GLOBAL 0xdeadbeef
dev->pdev->subsystem_device == sub_device;
}
+/* returns 1 if device is one of the nv4x using the 0x4497 object class,
+ * helpful to determine a number of other hardware features
+ */
+static inline int
+nv44_graph_class(struct drm_device *dev)
+{
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+
+ if ((dev_priv->chipset & 0xf0) == 0x60)
+ return 1;
+
+ return !(0x0baf & (1 << (dev_priv->chipset & 0x0f)));
+}
+
/* memory type/access flags, do not match hardware values */
#define NV_MEM_ACCESS_RO 1
#define NV_MEM_ACCESS_WO 2
FBINFO_HWACCEL_IMAGEBLIT;
info->flags |= FBINFO_CAN_FORCE_OUTPUT;
info->fbops = &nouveau_fbcon_sw_ops;
- info->fix.smem_start = dev->mode_config.fb_base +
- (nvbo->bo.mem.start << PAGE_SHIFT);
+ info->fix.smem_start = nvbo->bo.mem.bus.base +
+ nvbo->bo.mem.bus.offset;
info->fix.smem_len = size;
info->screen_base = nvbo_kmap_obj_iovirtual(nouveau_fb->nvbo);
{
struct nouveau_mm *mm = man->priv;
struct nouveau_mm_node *r;
- u64 total = 0, ttotal[3] = {}, tused[3] = {}, tfree[3] = {};
- int i;
+ u32 total = 0, free = 0;
mutex_lock(&mm->mutex);
list_for_each_entry(r, &mm->nodes, nl_entry) {
- printk(KERN_DEBUG "%s %s-%d: 0x%010llx 0x%010llx\n",
- prefix, r->free ? "free" : "used", r->type,
- ((u64)r->offset << 12),
+ printk(KERN_DEBUG "%s %d: 0x%010llx 0x%010llx\n",
+ prefix, r->type, ((u64)r->offset << 12),
(((u64)r->offset + r->length) << 12));
+
total += r->length;
- ttotal[r->type] += r->length;
- if (r->free)
- tfree[r->type] += r->length;
- else
- tused[r->type] += r->length;
+ if (!r->type)
+ free += r->length;
}
mutex_unlock(&mm->mutex);
- printk(KERN_DEBUG "%s total: 0x%010llx\n", prefix, total << 12);
- for (i = 0; i < 3; i++) {
- printk(KERN_DEBUG "%s type %d: 0x%010llx, "
- "used 0x%010llx, free 0x%010llx\n", prefix,
- i, ttotal[i] << 12, tused[i] << 12, tfree[i] << 12);
- }
+ printk(KERN_DEBUG "%s total: 0x%010llx free: 0x%010llx\n",
+ prefix, (u64)total << 12, (u64)free << 12);
+ printk(KERN_DEBUG "%s block: 0x%08x\n",
+ prefix, mm->block_size << 12);
}
const struct ttm_mem_type_manager_func nouveau_vram_manager = {
b->offset = a->offset;
b->length = size;
- b->free = a->free;
b->type = a->type;
a->offset += size;
a->length -= size;
list_add_tail(&b->nl_entry, &a->nl_entry);
- if (b->free)
+ if (b->type == 0)
list_add_tail(&b->fl_entry, &a->fl_entry);
return b;
}
-static struct nouveau_mm_node *
-nouveau_mm_merge(struct nouveau_mm *rmm, struct nouveau_mm_node *this)
-{
- struct nouveau_mm_node *prev, *next;
-
- /* try to merge with free adjacent entries of same type */
- prev = list_entry(this->nl_entry.prev, struct nouveau_mm_node, nl_entry);
- if (this->nl_entry.prev != &rmm->nodes) {
- if (prev->free && prev->type == this->type) {
- prev->length += this->length;
- region_put(rmm, this);
- this = prev;
- }
- }
-
- next = list_entry(this->nl_entry.next, struct nouveau_mm_node, nl_entry);
- if (this->nl_entry.next != &rmm->nodes) {
- if (next->free && next->type == this->type) {
- next->offset = this->offset;
- next->length += this->length;
- region_put(rmm, this);
- this = next;
- }
- }
-
- return this;
-}
+#define node(root, dir) ((root)->nl_entry.dir == &rmm->nodes) ? NULL : \
+ list_entry((root)->nl_entry.dir, struct nouveau_mm_node, nl_entry)
void
nouveau_mm_put(struct nouveau_mm *rmm, struct nouveau_mm_node *this)
{
- u32 block_s, block_l;
+ struct nouveau_mm_node *prev = node(this, prev);
+ struct nouveau_mm_node *next = node(this, next);
- this->free = true;
list_add(&this->fl_entry, &rmm->free);
- this = nouveau_mm_merge(rmm, this);
-
- /* any entirely free blocks now? we'll want to remove typing
- * on them now so they can be use for any memory allocation
- */
- block_s = roundup(this->offset, rmm->block_size);
- if (block_s + rmm->block_size > this->offset + this->length)
- return;
+ this->type = 0;
- /* split off any still-typed region at the start */
- if (block_s != this->offset) {
- if (!region_split(rmm, this, block_s - this->offset))
- return;
+ if (prev && prev->type == 0) {
+ prev->length += this->length;
+ region_put(rmm, this);
+ this = prev;
}
- /* split off the soon-to-be-untyped block(s) */
- block_l = rounddown(this->length, rmm->block_size);
- if (block_l != this->length) {
- this = region_split(rmm, this, block_l);
- if (!this)
- return;
+ if (next && next->type == 0) {
+ next->offset = this->offset;
+ next->length += this->length;
+ region_put(rmm, this);
}
-
- /* mark as having no type, and retry merge with any adjacent
- * untyped blocks
- */
- this->type = 0;
- nouveau_mm_merge(rmm, this);
}
int
nouveau_mm_get(struct nouveau_mm *rmm, int type, u32 size, u32 size_nc,
u32 align, struct nouveau_mm_node **pnode)
{
- struct nouveau_mm_node *this, *tmp, *next;
- u32 splitoff, avail, alloc;
-
- list_for_each_entry_safe(this, tmp, &rmm->free, fl_entry) {
- next = list_entry(this->nl_entry.next, struct nouveau_mm_node, nl_entry);
- if (this->nl_entry.next == &rmm->nodes)
- next = NULL;
-
- /* skip wrongly typed blocks */
- if (this->type && this->type != type)
+ struct nouveau_mm_node *prev, *this, *next;
+ u32 min = size_nc ? size_nc : size;
+ u32 align_mask = align - 1;
+ u32 splitoff;
+ u32 s, e;
+
+ list_for_each_entry(this, &rmm->free, fl_entry) {
+ e = this->offset + this->length;
+ s = this->offset;
+
+ prev = node(this, prev);
+ if (prev && prev->type != type)
+ s = roundup(s, rmm->block_size);
+
+ next = node(this, next);
+ if (next && next->type != type)
+ e = rounddown(e, rmm->block_size);
+
+ s = (s + align_mask) & ~align_mask;
+ e &= ~align_mask;
+ if (s > e || e - s < min)
continue;
- /* account for alignment */
- splitoff = this->offset & (align - 1);
- if (splitoff)
- splitoff = align - splitoff;
-
- if (this->length <= splitoff)
- continue;
-
- /* determine total memory available from this, and
- * the next block (if appropriate)
- */
- avail = this->length;
- if (next && next->free && (!next->type || next->type == type))
- avail += next->length;
-
- avail -= splitoff;
-
- /* determine allocation size */
- if (size_nc) {
- alloc = min(avail, size);
- alloc = rounddown(alloc, size_nc);
- if (alloc == 0)
- continue;
- } else {
- alloc = size;
- if (avail < alloc)
- continue;
- }
-
- /* untyped block, split off a chunk that's a multiple
- * of block_size and type it
- */
- if (!this->type) {
- u32 block = roundup(alloc + splitoff, rmm->block_size);
- if (this->length < block)
- continue;
-
- this = region_split(rmm, this, block);
- if (!this)
- return -ENOMEM;
-
- this->type = type;
- }
-
- /* stealing memory from adjacent block */
- if (alloc > this->length) {
- u32 amount = alloc - (this->length - splitoff);
-
- if (!next->type) {
- amount = roundup(amount, rmm->block_size);
-
- next = region_split(rmm, next, amount);
- if (!next)
- return -ENOMEM;
-
- next->type = type;
- }
-
- this->length += amount;
- next->offset += amount;
- next->length -= amount;
- if (!next->length) {
- list_del(&next->nl_entry);
- list_del(&next->fl_entry);
- kfree(next);
- }
- }
-
- if (splitoff) {
- if (!region_split(rmm, this, splitoff))
- return -ENOMEM;
- }
+ splitoff = s - this->offset;
+ if (splitoff && !region_split(rmm, this, splitoff))
+ return -ENOMEM;
- this = region_split(rmm, this, alloc);
- if (this == NULL)
+ this = region_split(rmm, this, min(size, e - s));
+ if (!this)
return -ENOMEM;
- this->free = false;
+ this->type = type;
list_del(&this->fl_entry);
*pnode = this;
return 0;
heap = kzalloc(sizeof(*heap), GFP_KERNEL);
if (!heap)
return -ENOMEM;
- heap->free = true;
heap->offset = roundup(offset, block);
heap->length = rounddown(offset + length, block) - heap->offset;
struct list_head fl_entry;
struct list_head rl_entry;
- bool free;
- int type;
-
+ u8 type;
u32 offset;
u32 length;
};
NVOBJ_CLASS(dev, 0x309e, GR); /* swzsurf */
/* curie */
- if (dev_priv->chipset >= 0x60 ||
- 0x00005450 & (1 << (dev_priv->chipset & 0x0f)))
+ if (nv44_graph_class(dev))
NVOBJ_CLASS(dev, 0x4497, GR);
else
NVOBJ_CLASS(dev, 0x4097, GR);
* - get vs count from 0x1540
*/
-static int
-nv40_graph_4097(struct drm_device *dev)
-{
- struct drm_nouveau_private *dev_priv = dev->dev_private;
-
- if ((dev_priv->chipset & 0xf0) == 0x60)
- return 0;
-
- return !!(0x0baf & (1 << dev_priv->chipset));
-}
-
static int
nv40_graph_vs_count(struct drm_device *dev)
{
gr_def(ctx, 0x4009dc, 0x80000000);
} else {
cp_ctx(ctx, 0x400840, 20);
- if (!nv40_graph_4097(ctx->dev)) {
+ if (nv44_graph_class(ctx->dev)) {
for (i = 0; i < 8; i++)
gr_def(ctx, 0x400860 + (i * 4), 0x00000001);
}
gr_def(ctx, 0x400888, 0x00000040);
cp_ctx(ctx, 0x400894, 11);
gr_def(ctx, 0x400894, 0x00000040);
- if (nv40_graph_4097(ctx->dev)) {
+ if (!nv44_graph_class(ctx->dev)) {
for (i = 0; i < 8; i++)
gr_def(ctx, 0x4008a0 + (i * 4), 0x80000000);
}
static void
nv40_graph_construct_state3d_3(struct nouveau_grctx *ctx)
{
- int len = nv40_graph_4097(ctx->dev) ? 0x0684 : 0x0084;
+ int len = nv44_graph_class(ctx->dev) ? 0x0084 : 0x0684;
cp_out (ctx, 0x300000);
cp_lsr (ctx, len - 4);
} else {
b0_offset = 0x1d40/4; /* 2200 */
b1_offset = 0x3f40/4; /* 0b00 : 0a40 */
- vs_len = nv40_graph_4097(dev) ? 0x4a40/4 : 0x4980/4;
+ vs_len = nv44_graph_class(dev) ? 0x4980/4 : 0x4a40/4;
}
cp_lsr(ctx, vs_len * vs_nr + 0x300/4);
- cp_out(ctx, nv40_graph_4097(dev) ? 0x800041 : 0x800029);
+ cp_out(ctx, nv44_graph_class(dev) ? 0x800029 : 0x800041);
offset = ctx->ctxvals_pos;
ctx->ctxvals_pos += (0x0300/4 + (vs_nr * vs_len));
int
nv40_mc_init(struct drm_device *dev)
{
- struct drm_nouveau_private *dev_priv = dev->dev_private;
- uint32_t tmp;
-
/* Power up everything, resetting each individual unit will
* be done later if needed.
*/
nv_wr32(dev, NV03_PMC_ENABLE, 0xFFFFFFFF);
- switch (dev_priv->chipset) {
- case 0x44:
- case 0x46: /* G72 */
- case 0x4e:
- case 0x4c: /* C51_G7X */
- tmp = nv_rd32(dev, NV04_PFB_FIFO_DATA);
+ if (nv44_graph_class(dev)) {
+ u32 tmp = nv_rd32(dev, NV04_PFB_FIFO_DATA);
nv_wr32(dev, NV40_PMC_1700, tmp);
nv_wr32(dev, NV40_PMC_1704, 0);
nv_wr32(dev, NV40_PMC_1708, 0);
nv_wr32(dev, NV40_PMC_170C, tmp);
- break;
- default:
- break;
}
return 0;
gpuobj->vinst = node->vram->offset;
if (gpuobj->flags & NVOBJ_FLAG_VM) {
- ret = nouveau_vm_get(dev_priv->chan_vm, size, 12,
- NV_MEM_ACCESS_RW | NV_MEM_ACCESS_SYS,
+ u32 flags = NV_MEM_ACCESS_RW;
+ if (!(gpuobj->flags & NVOBJ_FLAG_VM_USER))
+ flags |= NV_MEM_ACCESS_SYS;
+
+ ret = nouveau_vm_get(dev_priv->chan_vm, size, 12, flags,
&node->chan_vma);
if (ret) {
vram->put(dev, &node->vram);
if (ret)
return ret;
- ret = nouveau_gpuobj_new(dev, NULL, 384 * 1024, 4096, NVOBJ_FLAG_VM,
+ ret = nouveau_gpuobj_new(dev, NULL, 384 * 1024, 4096,
+ NVOBJ_FLAG_VM | NVOBJ_FLAG_VM_USER,
&grch->unk418810);
if (ret)
return ret;
phys >>= 8;
phys |= 0x00000001; /* present */
-// if (vma->access & NV_MEM_ACCESS_SYS)
-// phys |= 0x00000002;
+ if (vma->access & NV_MEM_ACCESS_SYS)
+ phys |= 0x00000002;
phys |= ((u64)target << 32);
phys |= ((u64)memtype << 36);
return 0;
}
-static bool evergreen_card_posted(struct radeon_device *rdev)
-{
- u32 reg;
-
- /* first check CRTCs */
- if (rdev->flags & RADEON_IS_IGP)
- reg = RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET) |
- RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET);
- else
- reg = RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET) |
- RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET) |
- RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC2_REGISTER_OFFSET) |
- RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC3_REGISTER_OFFSET) |
- RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC4_REGISTER_OFFSET) |
- RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET);
- if (reg & EVERGREEN_CRTC_MASTER_EN)
- return true;
-
- /* then check MEM_SIZE, in case the crtcs are off */
- if (RREG32(CONFIG_MEMSIZE))
- return true;
-
- return false;
-}
-
/* Plan is to move initialization in that function and use
* helper function so that radeon_device_init pretty much
* do nothing more than calling asic specific function. This
if (radeon_asic_reset(rdev))
dev_warn(rdev->dev, "GPU reset failed !\n");
/* Post card if necessary */
- if (!evergreen_card_posted(rdev)) {
+ if (!radeon_card_posted(rdev)) {
if (!rdev->bios) {
dev_err(rdev->dev, "Card not posted and no BIOS - ignoring\n");
return -EINVAL;
{
u32 link_width_cntl, speed_cntl;
+ if (radeon_pcie_gen2 == 0)
+ return;
+
if (rdev->flags & RADEON_IS_IGP)
return;
{
struct r100_mc_save save;
u32 status, tmp;
+ int ret = 0;
- r100_mc_stop(rdev, &save);
status = RREG32(R_000E40_RBBM_STATUS);
if (!G_000E40_GUI_ACTIVE(status)) {
return 0;
}
+ r100_mc_stop(rdev, &save);
status = RREG32(R_000E40_RBBM_STATUS);
dev_info(rdev->dev, "(%s:%d) RBBM_STATUS=0x%08X\n", __func__, __LINE__, status);
/* stop CP */
G_000E40_TAM_BUSY(status) || G_000E40_PB_BUSY(status)) {
dev_err(rdev->dev, "failed to reset GPU\n");
rdev->gpu_lockup = true;
- return -1;
- }
+ ret = -1;
+ } else
+ dev_info(rdev->dev, "GPU reset succeed\n");
r100_mc_resume(rdev, &save);
- dev_info(rdev->dev, "GPU reset succeed\n");
- return 0;
+ return ret;
}
void r100_set_common_regs(struct radeon_device *rdev)
{
struct r100_mc_save save;
u32 status, tmp;
+ int ret = 0;
- r100_mc_stop(rdev, &save);
status = RREG32(R_000E40_RBBM_STATUS);
if (!G_000E40_GUI_ACTIVE(status)) {
return 0;
}
+ r100_mc_stop(rdev, &save);
status = RREG32(R_000E40_RBBM_STATUS);
dev_info(rdev->dev, "(%s:%d) RBBM_STATUS=0x%08X\n", __func__, __LINE__, status);
/* stop CP */
if (G_000E40_GA_BUSY(status) || G_000E40_VAP_BUSY(status)) {
dev_err(rdev->dev, "failed to reset GPU\n");
rdev->gpu_lockup = true;
- return -1;
- }
+ ret = -1;
+ } else
+ dev_info(rdev->dev, "GPU reset succeed\n");
r100_mc_resume(rdev, &save);
- dev_info(rdev->dev, "GPU reset succeed\n");
- return 0;
+ return ret;
}
/*
/* FIXME: implement */
}
-
-bool r600_card_posted(struct radeon_device *rdev)
-{
- uint32_t reg;
-
- /* first check CRTCs */
- reg = RREG32(D1CRTC_CONTROL) |
- RREG32(D2CRTC_CONTROL);
- if (reg & CRTC_EN)
- return true;
-
- /* then check MEM_SIZE, in case the crtcs are off */
- if (RREG32(CONFIG_MEMSIZE))
- return true;
-
- return false;
-}
-
int r600_startup(struct radeon_device *rdev)
{
int r;
if (r)
return r;
/* Post card if necessary */
- if (!r600_card_posted(rdev)) {
+ if (!radeon_card_posted(rdev)) {
if (!rdev->bios) {
dev_err(rdev->dev, "Card not posted and no BIOS - ignoring\n");
return -EINVAL;
u32 link_width_cntl, lanes, speed_cntl, training_cntl, tmp;
u16 link_cntl2;
+ if (radeon_pcie_gen2 == 0)
+ return;
+
if (rdev->flags & RADEON_IS_IGP)
return;
extern int radeon_audio;
extern int radeon_disp_priority;
extern int radeon_hw_i2c;
+extern int radeon_pcie_gen2;
/*
* Copy from radeon_drv.h so we don't have to include both and have conflicting
int radeon_audio = 1;
int radeon_disp_priority = 0;
int radeon_hw_i2c = 0;
+int radeon_pcie_gen2 = 0;
MODULE_PARM_DESC(no_wb, "Disable AGP writeback for scratch registers");
module_param_named(no_wb, radeon_no_wb, int, 0444);
MODULE_PARM_DESC(hw_i2c, "hw i2c engine enable (0 = disable)");
module_param_named(hw_i2c, radeon_hw_i2c, int, 0444);
+MODULE_PARM_DESC(pcie_gen2, "PCIE Gen2 mode (1 = enable)");
+module_param_named(pcie_gen2, radeon_pcie_gen2, int, 0444);
+
static int radeon_suspend(struct drm_device *dev, pm_message_t state)
{
drm_radeon_private_t *dev_priv = dev->dev_private;
0x000286EC SPI_COMPUTE_NUM_THREAD_X
0x000286F0 SPI_COMPUTE_NUM_THREAD_Y
0x000286F4 SPI_COMPUTE_NUM_THREAD_Z
-0x000286F8 GDS_ADDR_SIZE
+0x00028724 GDS_ADDR_SIZE
0x00028780 CB_BLEND0_CONTROL
0x00028784 CB_BLEND1_CONTROL
0x00028788 CB_BLEND2_CONTROL
int rs600_asic_reset(struct radeon_device *rdev)
{
- u32 status, tmp;
-
struct rv515_mc_save save;
+ u32 status, tmp;
+ int ret = 0;
- /* Stops all mc clients */
- rv515_mc_stop(rdev, &save);
status = RREG32(R_000E40_RBBM_STATUS);
if (!G_000E40_GUI_ACTIVE(status)) {
return 0;
}
+ /* Stops all mc clients */
+ rv515_mc_stop(rdev, &save);
status = RREG32(R_000E40_RBBM_STATUS);
dev_info(rdev->dev, "(%s:%d) RBBM_STATUS=0x%08X\n", __func__, __LINE__, status);
/* stop CP */
if (G_000E40_GA_BUSY(status) || G_000E40_VAP_BUSY(status)) {
dev_err(rdev->dev, "failed to reset GPU\n");
rdev->gpu_lockup = true;
- return -1;
- }
+ ret = -1;
+ } else
+ dev_info(rdev->dev, "GPU reset succeed\n");
rv515_mc_resume(rdev, &save);
- dev_info(rdev->dev, "GPU reset succeed\n");
- return 0;
+ return ret;
}
/*
if (r)
return r;
/* Post card if necessary */
- if (!r600_card_posted(rdev)) {
+ if (!radeon_card_posted(rdev)) {
if (!rdev->bios) {
dev_err(rdev->dev, "Card not posted and no BIOS - ignoring\n");
return -EINVAL;
u32 link_width_cntl, lanes, speed_cntl, tmp;
u16 link_cntl2;
+ if (radeon_pcie_gen2 == 0)
+ return;
+
if (rdev->flags & RADEON_IS_IGP)
return;
*
* Please credit ARM.com
* Documentation: ARM DDI 0196D
- *
*/
#ifndef AMBA_PL08X_H
#include <linux/dmaengine.h>
#include <linux/interrupt.h>
+struct pl08x_lli;
+struct pl08x_driver_data;
+
+/* Bitmasks for selecting AHB ports for DMA transfers */
+enum {
+ PL08X_AHB1 = (1 << 0),
+ PL08X_AHB2 = (1 << 1)
+};
+
/**
* struct pl08x_channel_data - data structure to pass info between
* platform and PL08x driver regarding channel configuration
* @circular_buffer: whether the buffer passed in is circular and
* shall simply be looped round round (like a record baby round
* round round round)
- * @single: the device connected to this channel will request single
- * DMA transfers, not bursts. (Bursts are default.)
+ * @single: the device connected to this channel will request single DMA
+ * transfers, not bursts. (Bursts are default.)
+ * @periph_buses: the device connected to this channel is accessible via
+ * these buses (use PL08X_AHB1 | PL08X_AHB2).
*/
struct pl08x_channel_data {
char *bus_id;
int max_signal;
u32 muxval;
u32 cctl;
- u32 ccfg;
dma_addr_t addr;
bool circular_buffer;
bool single;
+ u8 periph_buses;
};
/**
* @addr: current address
* @maxwidth: the maximum width of a transfer on this bus
* @buswidth: the width of this bus in bytes: 1, 2 or 4
- * @fill_bytes: bytes required to fill to the next bus memory
- * boundary
+ * @fill_bytes: bytes required to fill to the next bus memory boundary
*/
struct pl08x_bus_data {
dma_addr_t addr;
u8 maxwidth;
u8 buswidth;
- u32 fill_bytes;
+ size_t fill_bytes;
};
/**
* struct pl08x_phy_chan - holder for the physical channels
* @id: physical index to this channel
* @lock: a lock to use when altering an instance of this struct
- * @signal: the physical signal (aka channel) serving this
- * physical channel right now
- * @serving: the virtual channel currently being served by this
- * physical channel
+ * @signal: the physical signal (aka channel) serving this physical channel
+ * right now
+ * @serving: the virtual channel currently being served by this physical
+ * channel
*/
struct pl08x_phy_chan {
unsigned int id;
spinlock_t lock;
int signal;
struct pl08x_dma_chan *serving;
- u32 csrc;
- u32 cdst;
- u32 clli;
- u32 cctl;
- u32 ccfg;
};
/**
struct dma_async_tx_descriptor tx;
struct list_head node;
enum dma_data_direction direction;
- struct pl08x_bus_data srcbus;
- struct pl08x_bus_data dstbus;
- int len;
+ dma_addr_t src_addr;
+ dma_addr_t dst_addr;
+ size_t len;
dma_addr_t llis_bus;
- void *llis_va;
- struct pl08x_channel_data *cd;
- bool active;
+ struct pl08x_lli *llis_va;
+ /* Default cctl value for LLIs */
+ u32 cctl;
/*
* Settings to be put into the physical channel when we
- * trigger this txd
+ * trigger this txd. Other registers are in llis_va[0].
*/
- u32 csrc;
- u32 cdst;
- u32 clli;
- u32 cctl;
+ u32 ccfg;
};
/**
- * struct pl08x_dma_chan_state - holds the PL08x specific virtual
- * channel states
+ * struct pl08x_dma_chan_state - holds the PL08x specific virtual channel
+ * states
* @PL08X_CHAN_IDLE: the channel is idle
* @PL08X_CHAN_RUNNING: the channel has allocated a physical transport
* channel and is running a transfer on it
* struct pl08x_dma_chan - this structure wraps a DMA ENGINE channel
* @chan: wrappped abstract channel
* @phychan: the physical channel utilized by this channel, if there is one
+ * @phychan_hold: if non-zero, hold on to the physical channel even if we
+ * have no pending entries
* @tasklet: tasklet scheduled by the IRQ to handle actual work etc
* @name: name of channel
* @cd: channel platform data
* @runtime_direction: current direction of this channel according to
* runtime config
* @lc: last completed transaction on this channel
- * @desc_list: queued transactions pending on this channel
+ * @pend_list: queued transactions pending on this channel
* @at: active transaction on this channel
- * @lockflags: sometimes we let a lock last between two function calls,
- * especially prep/submit, and then we need to store the IRQ flags
- * in the channel state, here
* @lock: a lock for this channel data
* @host: a pointer to the host (internal use)
* @state: whether the channel is idle, paused, running etc
* @slave: whether this channel is a device (slave) or for memcpy
- * @waiting: a TX descriptor on this channel which is waiting for
- * a physical channel to become available
+ * @waiting: a TX descriptor on this channel which is waiting for a physical
+ * channel to become available
*/
struct pl08x_dma_chan {
struct dma_chan chan;
struct pl08x_phy_chan *phychan;
+ int phychan_hold;
struct tasklet_struct tasklet;
char *name;
struct pl08x_channel_data *cd;
dma_addr_t runtime_addr;
enum dma_data_direction runtime_direction;
- atomic_t last_issued;
dma_cookie_t lc;
- struct list_head desc_list;
+ struct list_head pend_list;
struct pl08x_txd *at;
- unsigned long lockflags;
spinlock_t lock;
- void *host;
+ struct pl08x_driver_data *host;
enum pl08x_dma_chan_state state;
bool slave;
struct pl08x_txd *waiting;
};
/**
- * struct pl08x_platform_data - the platform configuration for the
- * PL08x PrimeCells.
+ * struct pl08x_platform_data - the platform configuration for the PL08x
+ * PrimeCells.
* @slave_channels: the channels defined for the different devices on the
* platform, all inclusive, including multiplexed channels. The available
- * physical channels will be multiplexed around these signals as they
- * are requested, just enumerate all possible channels.
- * @get_signal: request a physical signal to be used for a DMA
- * transfer immediately: if there is some multiplexing or similar blocking
- * the use of the channel the transfer can be denied by returning
- * less than zero, else it returns the allocated signal number
+ * physical channels will be multiplexed around these signals as they are
+ * requested, just enumerate all possible channels.
+ * @get_signal: request a physical signal to be used for a DMA transfer
+ * immediately: if there is some multiplexing or similar blocking the use
+ * of the channel the transfer can be denied by returning less than zero,
+ * else it returns the allocated signal number
* @put_signal: indicate to the platform that this physical signal is not
* running any DMA transfer and multiplexing can be recycled
- * @bus_bit_lli: Bit[0] of the address indicated which AHB bus master the
- * LLI addresses are on 0/1 Master 1/2.
+ * @lli_buses: buses which LLIs can be fetched from: PL08X_AHB1 | PL08X_AHB2
+ * @mem_buses: buses which memory can be accessed from: PL08X_AHB1 | PL08X_AHB2
*/
struct pl08x_platform_data {
struct pl08x_channel_data *slave_channels;
struct pl08x_channel_data memcpy_channel;
int (*get_signal)(struct pl08x_dma_chan *);
void (*put_signal)(struct pl08x_dma_chan *);
+ u8 lli_buses;
+ u8 mem_buses;
};
#ifdef CONFIG_AMBA_PL08X
return dmaengine_device_control(chan, DMA_RESUME, 0);
}
-static inline int dmaengine_submit(struct dma_async_tx_descriptor *desc)
+static inline dma_cookie_t dmaengine_submit(struct dma_async_tx_descriptor *desc)
{
return desc->tx_submit(desc);
}
git.openpandora.org / pandora-kernel.git / commitdiff