spi/imx: add device tree probe support
authorShawn Guo <shawn.guo@linaro.org>
Sat, 9 Jul 2011 17:16:41 +0000 (01:16 +0800)
committerGrant Likely <grant.likely@secretlab.ca>
Thu, 14 Jul 2011 19:47:18 +0000 (13:47 -0600)
It adds device tree probe support for spi-imx driver.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt [new file with mode: 0644]
drivers/spi/spi-imx.c

diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
new file mode 100644 (file)
index 0000000..9841057
--- /dev/null
@@ -0,0 +1,22 @@
+* Freescale (Enhanced) Configurable Serial Peripheral Interface
+  (CSPI/eCSPI) for i.MX
+
+Required properties:
+- compatible : Should be "fsl,<soc>-cspi" or "fsl,<soc>-ecspi"
+- reg : Offset and length of the register set for the device
+- interrupts : Should contain CSPI/eCSPI interrupt
+- fsl,spi-num-chipselects : Contains the number of the chipselect
+- cs-gpios : Specifies the gpio pins to be used for chipselects.
+
+Example:
+
+ecspi@70010000 {
+       #address-cells = <1>;
+       #size-cells = <0>;
+       compatible = "fsl,imx51-ecspi";
+       reg = <0x70010000 0x4000>;
+       interrupts = <36>;
+       fsl,spi-num-chipselects = <2>;
+       cs-gpios = <&gpio3 24 0>, /* GPIO4_24 */
+                  <&gpio3 25 0>; /* GPIO4_25 */
+};
index 591ebc3..8ac6542 100644 (file)
@@ -34,6 +34,9 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/spi_bitbang.h>
 #include <linux/types.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
 
 #include <mach/spi.h>
 
@@ -604,6 +607,16 @@ static struct platform_device_id spi_imx_devtype[] = {
        }
 };
 
+static const struct of_device_id spi_imx_dt_ids[] = {
+       { .compatible = "fsl,imx1-cspi", .data = &imx1_cspi_devtype_data, },
+       { .compatible = "fsl,imx21-cspi", .data = &imx21_cspi_devtype_data, },
+       { .compatible = "fsl,imx27-cspi", .data = &imx27_cspi_devtype_data, },
+       { .compatible = "fsl,imx31-cspi", .data = &imx31_cspi_devtype_data, },
+       { .compatible = "fsl,imx35-cspi", .data = &imx35_cspi_devtype_data, },
+       { .compatible = "fsl,imx51-ecspi", .data = &imx51_ecspi_devtype_data, },
+       { /* sentinel */ }
+};
+
 static void spi_imx_chipselect(struct spi_device *spi, int is_active)
 {
        struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
@@ -737,19 +750,25 @@ static void spi_imx_cleanup(struct spi_device *spi)
 
 static int __devinit spi_imx_probe(struct platform_device *pdev)
 {
-       struct spi_imx_master *mxc_platform_info;
+       struct device_node *np = pdev->dev.of_node;
+       const struct of_device_id *of_id =
+                       of_match_device(spi_imx_dt_ids, &pdev->dev);
+       struct spi_imx_master *mxc_platform_info =
+                       dev_get_platdata(&pdev->dev);
        struct spi_master *master;
        struct spi_imx_data *spi_imx;
        struct resource *res;
        int i, ret, num_cs;
 
-       mxc_platform_info = dev_get_platdata(&pdev->dev);
-       if (!mxc_platform_info) {
+       if (!np && !mxc_platform_info) {
                dev_err(&pdev->dev, "can't get the platform data\n");
                return -EINVAL;
        }
 
-       num_cs = mxc_platform_info->num_chipselect;
+       ret = of_property_read_u32(np, "fsl,spi-num-chipselects", &num_cs);
+       if (ret < 0)
+               num_cs = mxc_platform_info->num_chipselect;
+
        master = spi_alloc_master(&pdev->dev,
                        sizeof(struct spi_imx_data) + sizeof(int) * num_cs);
        if (!master)
@@ -764,9 +783,12 @@ static int __devinit spi_imx_probe(struct platform_device *pdev)
        spi_imx->bitbang.master = spi_master_get(master);
 
        for (i = 0; i < master->num_chipselect; i++) {
-               spi_imx->chipselect[i] = mxc_platform_info->chipselect[i];
-               if (spi_imx->chipselect[i] < 0)
+               int cs_gpio = of_get_named_gpio(np, "cs-gpios", i);
+               if (cs_gpio < 0)
+                       cs_gpio = mxc_platform_info->chipselect[i];
+               if (cs_gpio < 0)
                        continue;
+               spi_imx->chipselect[i] = cs_gpio;
                ret = gpio_request(spi_imx->chipselect[i], DRIVER_NAME);
                if (ret) {
                        while (i > 0) {
@@ -788,7 +810,7 @@ static int __devinit spi_imx_probe(struct platform_device *pdev)
 
        init_completion(&spi_imx->xfer_done);
 
-       spi_imx->devtype_data =
+       spi_imx->devtype_data = of_id ? of_id->data :
                (struct spi_imx_devtype_data *) pdev->id_entry->driver_data;
 
        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -836,6 +858,7 @@ static int __devinit spi_imx_probe(struct platform_device *pdev)
 
        spi_imx->devtype_data->intctrl(spi_imx, 0);
 
+       master->dev.of_node = pdev->dev.of_node;
        ret = spi_bitbang_start(&spi_imx->bitbang);
        if (ret) {
                dev_err(&pdev->dev, "bitbang start failed with %d\n", ret);
@@ -898,6 +921,7 @@ static struct platform_driver spi_imx_driver = {
        .driver = {
                   .name = DRIVER_NAME,
                   .owner = THIS_MODULE,
+                  .of_match_table = spi_imx_dt_ids,
                   },
        .id_table = spi_imx_devtype,
        .probe = spi_imx_probe,