wl12xx: add debugfs entries for dtim_interval and beacon_interval

When configuring ACX_WAKE_UP_CONDITIONS (before entering psm), we
tell the firmware to wake up once in N DTIMs/beacons.

Allow control of this value via debugfs (for debugging purposes).

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>

diff --git a/drivers/net/wireless/wl12xx/debugfs.c b/drivers/net/wireless/wl12xx/debugfs.c
index 70ab198..88c6efe 100644 (file)
--- a/drivers/net/wireless/wl12xx/debugfs.c
+++ b/drivers/net/wireless/wl12xx/debugfs.c
@@ -291,6 +291,136 @@ static const struct file_operations gpio_power_ops = {
        .llseek = default_llseek,
 };
 
+static ssize_t dtim_interval_read(struct file *file, char __user *user_buf,
+                                 size_t count, loff_t *ppos)
+{
+       struct wl1271 *wl = file->private_data;
+       u8 value;
+
+       if (wl->conf.conn.wake_up_event == CONF_WAKE_UP_EVENT_DTIM ||
+           wl->conf.conn.wake_up_event == CONF_WAKE_UP_EVENT_N_DTIM)
+               value = wl->conf.conn.listen_interval;
+       else
+               value = 0;
+
+       return wl1271_format_buffer(user_buf, count, ppos, "%d\n", value);
+}
+
+static ssize_t dtim_interval_write(struct file *file,
+                                  const char __user *user_buf,
+                                  size_t count, loff_t *ppos)
+{
+       struct wl1271 *wl = file->private_data;
+       char buf[10];
+       size_t len;
+       unsigned long value;
+       int ret;
+
+       len = min(count, sizeof(buf) - 1);
+       if (copy_from_user(buf, user_buf, len))
+               return -EFAULT;
+       buf[len] = '\0';
+
+       ret = strict_strtoul(buf, 0, &value);
+       if (ret < 0) {
+               wl1271_warning("illegal value for dtim_interval");
+               return -EINVAL;
+       }
+
+       if (value < 1 || value > 10) {
+               wl1271_warning("dtim value is not in valid range");
+               return -ERANGE;
+       }
+
+       mutex_lock(&wl->mutex);
+
+       wl->conf.conn.listen_interval = value;
+       /* for some reason there are different event types for 1 and >1 */
+       if (value == 1)
+               wl->conf.conn.wake_up_event = CONF_WAKE_UP_EVENT_DTIM;
+       else
+               wl->conf.conn.wake_up_event = CONF_WAKE_UP_EVENT_N_DTIM;
+
+       /*
+        * we don't reconfigure ACX_WAKE_UP_CONDITIONS now, so it will only
+        * take effect on the next time we enter psm.
+        */
+       mutex_unlock(&wl->mutex);
+       return count;
+}
+
+static const struct file_operations dtim_interval_ops = {
+       .read = dtim_interval_read,
+       .write = dtim_interval_write,
+       .open = wl1271_open_file_generic,
+       .llseek = default_llseek,
+};
+
+static ssize_t beacon_interval_read(struct file *file, char __user *user_buf,
+                                   size_t count, loff_t *ppos)
+{
+       struct wl1271 *wl = file->private_data;
+       u8 value;
+
+       if (wl->conf.conn.wake_up_event == CONF_WAKE_UP_EVENT_BEACON ||
+           wl->conf.conn.wake_up_event == CONF_WAKE_UP_EVENT_N_BEACONS)
+               value = wl->conf.conn.listen_interval;
+       else
+               value = 0;
+
+       return wl1271_format_buffer(user_buf, count, ppos, "%d\n", value);
+}
+
+static ssize_t beacon_interval_write(struct file *file,
+                                    const char __user *user_buf,
+                                    size_t count, loff_t *ppos)
+{
+       struct wl1271 *wl = file->private_data;
+       char buf[10];
+       size_t len;
+       unsigned long value;
+       int ret;
+
+       len = min(count, sizeof(buf) - 1);
+       if (copy_from_user(buf, user_buf, len))
+               return -EFAULT;
+       buf[len] = '\0';
+
+       ret = strict_strtoul(buf, 0, &value);
+       if (ret < 0) {
+               wl1271_warning("illegal value for beacon_interval");
+               return -EINVAL;
+       }
+
+       if (value < 1 || value > 255) {
+               wl1271_warning("beacon interval value is not in valid range");
+               return -ERANGE;
+       }
+
+       mutex_lock(&wl->mutex);
+
+       wl->conf.conn.listen_interval = value;
+       /* for some reason there are different event types for 1 and >1 */
+       if (value == 1)
+               wl->conf.conn.wake_up_event = CONF_WAKE_UP_EVENT_BEACON;
+       else
+               wl->conf.conn.wake_up_event = CONF_WAKE_UP_EVENT_N_BEACONS;
+
+       /*
+        * we don't reconfigure ACX_WAKE_UP_CONDITIONS now, so it will only
+        * take effect on the next time we enter psm.
+        */
+       mutex_unlock(&wl->mutex);
+       return count;
+}
+
+static const struct file_operations beacon_interval_ops = {
+       .read = beacon_interval_read,
+       .write = beacon_interval_write,
+       .open = wl1271_open_file_generic,
+       .llseek = default_llseek,
+};
+
 static int wl1271_debugfs_add_files(struct wl1271 *wl,
                                     struct dentry *rootdir)
 {
@@ -399,6 +529,8 @@ static int wl1271_debugfs_add_files(struct wl1271 *wl,
        DEBUGFS_ADD(excessive_retries, rootdir);
 
        DEBUGFS_ADD(gpio_power, rootdir);
+       DEBUGFS_ADD(dtim_interval, rootdir);
+       DEBUGFS_ADD(beacon_interval, rootdir);
 
        return 0;