- S3C24XX ARM Linux Overview
Sharp-LH
- Linux on Sharp LH79524 and LH7A40X System On a Chip (SOC)
+SPEAr
+ - ST SPEAr platform Linux Overview
VFP/
- Release notes for Linux Kernel Vector Floating Point support code
empeg/
--- /dev/null
+ SPEAr ARM Linux Overview
+ ==========================
+
+Introduction
+------------
+
+ SPEAr (Structured Processor Enhanced Architecture).
+ weblink : http://www.st.com/spear
+
+ The ST Microelectronics SPEAr range of ARM9/CortexA9 System-on-Chip CPUs are
+ supported by the 'spear' platform of ARM Linux. Currently SPEAr300,
+ SPEAr310, SPEAr320 and SPEAr600 SOCs are supported. Support for the SPEAr13XX
+ series is in progress.
+
+ Hierarchy in SPEAr is as follows:
+
+ SPEAr (Platform)
+ - SPEAr3XX (3XX SOC series, based on ARM9)
+ - SPEAr300 (SOC)
+ - SPEAr300_EVB (Evaluation Board)
+ - SPEAr310 (SOC)
+ - SPEAr310_EVB (Evaluation Board)
+ - SPEAr320 (SOC)
+ - SPEAr320_EVB (Evaluation Board)
+ - SPEAr6XX (6XX SOC series, based on ARM9)
+ - SPEAr600 (SOC)
+ - SPEAr600_EVB (Evaluation Board)
+ - SPEAr13XX (13XX SOC series, based on ARM CORTEXA9)
+ - SPEAr1300 (SOC)
+
+ Configuration
+ -------------
+
+ A generic configuration is provided for each machine, and can be used as the
+ default by
+ make spear600_defconfig
+ make spear300_defconfig
+ make spear310_defconfig
+ make spear320_defconfig
+
+ Layout
+ ------
+
+ The common files for multiple machine families (SPEAr3XX, SPEAr6XX and
+ SPEAr13XX) are located in the platform code contained in arch/arm/plat-spear
+ with headers in plat/.
+
+ Each machine series have a directory with name arch/arm/mach-spear followed by
+ series name. Like mach-spear3xx, mach-spear6xx and mach-spear13xx.
+
+ Common file for machines of spear3xx family is mach-spear3xx/spear3xx.c and for
+ spear6xx is mach-spear6xx/spear6xx.c. mach-spear* also contain soc/machine
+ specific files, like spear300.c, spear310.c, spear320.c and spear600.c.
+ mach-spear* also contains board specific files for each machine type.
+
+
+ Document Author
+ ---------------
+
+ Viresh Kumar, (c) 2010 ST Microelectronics
----------------------------
-What: corgikbd, spitzkbd, tosakbd driver
-When: 2.6.35
-Files: drivers/input/keyboard/{corgi,spitz,tosa}kbd.c
-Why: We now have a generic GPIO based matrix keyboard driver that
- are fully capable of handling all the keys on these devices.
- The original drivers manipulate the GPIO registers directly
- and so are difficult to maintain.
-Who: Eric Miao <eric.y.miao@gmail.com>
-
-----------------------------
-
-What: corgi_ssp and corgi_ts driver
-When: 2.6.35
-Files: arch/arm/mach-pxa/corgi_ssp.c, drivers/input/touchscreen/corgi_ts.c
-Why: The corgi touchscreen is now deprecated in favour of the generic
- ads7846.c driver. The noise reduction technique used in corgi_ts.c,
- that's to wait till vsync before ADC sampling, is also integrated into
- ads7846 driver now. Provided that the original driver is not generic
- and is difficult to maintain, it will be removed later.
-Who: Eric Miao <eric.y.miao@gmail.com>
-
-----------------------------
-
What: capifs
When: February 2011
Files: drivers/isdn/capi/capifs.*
F: drivers/mtd/nand/bcm_umi_hamming.c
F: drivers/mtd/nand/nand_bcm_umi.h
+ARM/CAVIUM NETWORKS CNS3XXX MACHINE SUPPORT
+M: Anton Vorontsov <avorontsov@mvista.com>
+S: Maintained
+F: arch/arm/mach-cns3xxx/
+T: git git://git.infradead.org/users/cbou/linux-cns3xxx.git
+
ARM/CIRRUS LOGIC EP93XX ARM ARCHITECTURE
M: Hartley Sweeten <hsweeten@visionengravers.com>
M: Ryan Mallon <ryan@bluewatersys.com>
S: Maintained
ARM/Marvell Loki/Kirkwood/MV78xx0/Orion SOC support
-M: Lennert Buytenhek <buytenh@marvell.com>
-M: Nicolas Pitre <nico@marvell.com>
+M: Lennert Buytenhek <kernel@wantstofly.org>
+M: Nicolas Pitre <nico@fluxnic.net>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-T: git git://git.marvell.com/orion
-S: Maintained
+S: Odd Fixes
F: arch/arm/mach-loki/
F: arch/arm/mach-kirkwood/
F: arch/arm/mach-mv78xx0/
S: Maintained
F: arch/arm/vfp/
+ARM/VOIPAC PXA270 SUPPORT
+M: Marek Vasut <marek.vasut@gmail.com>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+F: arch/arm/mach-pxa/vpac270.c
+F: arch/arm/mach-pxa/include/mach-pxa/vpac270.h
+
+ARM/ZIPIT Z2 SUPPORT
+M: Marek Vasut <marek.vasut@gmail.com>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+F: arch/arm/mach-pxa/z2.c
+F: arch/arm/mach-pxa/include/mach-pxa/z2.h
+
ASC7621 HARDWARE MONITOR DRIVER
M: George Joseph <george.joseph@fairview5.com>
L: lm-sensors@lm-sensors.org
MARVELL SOC MMC/SD/SDIO CONTROLLER DRIVER
M: Nicolas Pitre <nico@fluxnic.net>
-S: Maintained
+S: Odd Fixes
+F: drivers/mmc/host/mvsdio.*
MARVELL YUKON / SYSKONNECT DRIVER
M: Mirko Lindner <mlindner@syskonnect.de>
SMC91x ETHERNET DRIVER
M: Nicolas Pitre <nico@fluxnic.net>
-S: Maintained
+S: Odd Fixes
F: drivers/net/smc91x.*
SMSC47B397 HARDWARE MONITOR DRIVER
F: drivers/serial/sunzilog.c
F: drivers/serial/sunzilog.h
+SPEAR PLATFORM SUPPORT
+M: Viresh Kumar <viresh.kumar@st.com>
+W: http://www.st.com/spear
+S: Maintained
+F: arch/arm/plat-spear/
+
+SPEAR3XX MACHINE SUPPORT
+M: Viresh Kumar <viresh.kumar@st.com>
+W: http://www.st.com/spear
+S: Maintained
+F: arch/arm/mach-spear3xx/
+
+SPEAR6XX MACHINE SUPPORT
+M: Rajeev Kumar <rajeev-dlh.kumar@st.com>
+W: http://www.st.com/spear
+S: Maintained
+F: arch/arm/mach-spear6xx/
+
+SPEAR CLOCK FRAMEWORK SUPPORT
+M: Viresh Kumar <viresh.kumar@st.com>
+W: http://www.st.com/spear
+S: Maintained
+F: arch/arm/mach-spear*/clock.c
+F: arch/arm/mach-spear*/include/mach/clkdev.h
+F: arch/arm/plat-spear/clock.c
+F: arch/arm/plat-spear/include/plat/clock.h and clkdev.h
+
+SPEAR PAD MULTIPLEXING SUPPORT
+M: Viresh Kumar <viresh.kumar@st.com>
+W: http://www.st.com/spear
+S: Maintained
+F: arch/arm/plat-spear/include/plat/padmux.h
+F: arch/arm/plat-spear/padmux.c
+F: arch/arm/mach-spear*/spear*xx.c
+F: arch/arm/mach-spear*/include/mach/generic.h
+F: arch/arm/mach-spear3xx/spear3*0.c
+F: arch/arm/mach-spear3xx/spear3*0_evb.c
+F: arch/arm/mach-spear6xx/spear600.c
+F: arch/arm/mach-spear6xx/spear600_evb.c
+
SPECIALIX IO8+ MULTIPORT SERIAL CARD DRIVER
M: Roger Wolff <R.E.Wolff@BitWizard.nl>
S: Supported
select RTC_LIB
select SYS_SUPPORTS_APM_EMULATION
select GENERIC_ATOMIC64 if (!CPU_32v6K)
- select HAVE_OPROFILE
+ select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
select HAVE_ARCH_KGDB
select HAVE_KPROBES if (!XIP_KERNEL)
select HAVE_KRETPROBES if (HAVE_KPROBES)
select HAVE_GENERIC_DMA_COHERENT
select HAVE_KERNEL_GZIP
select HAVE_KERNEL_LZO
+ select HAVE_KERNEL_LZMA
select HAVE_PERF_EVENTS
select PERF_USE_VMALLOC
help
config GENERIC_TIME
bool
+ default y
+
+config ARCH_USES_GETTIMEOFFSET
+ bool
+ default n
config GENERIC_CLOCKEVENTS
bool
help
Setting ARM L1 cache line size to 64 Bytes.
-if OPROFILE
-
-config OPROFILE_ARMV6
- def_bool y
- depends on CPU_V6 && !SMP
- select OPROFILE_ARM11_CORE
-
-config OPROFILE_MPCORE
- def_bool y
- depends on CPU_V6 && SMP
- select OPROFILE_ARM11_CORE
-
-config OPROFILE_ARM11_CORE
- bool
-
-config OPROFILE_ARMV7
- def_bool y
- depends on CPU_V7 && !SMP
- bool
-
-endif
-
config VECTORS_BASE
hex
default 0xffff0000 if MMU || CPU_HIGH_VECTOR
select CPU_ARM920T
select ARM_AMBA
select HAVE_CLK
+ select ARCH_USES_GETTIMEOFFSET
help
This enables support for systems based on the Agilent AAEC-2000
bool "ARM Ltd. Integrator family"
select ARM_AMBA
select ARCH_HAS_CPUFREQ
- select HAVE_CLK
select COMMON_CLKDEV
- select ICST525
+ select ICST
+ select GENERIC_CLOCKEVENTS
+ select PLAT_VERSATILE
help
Support for ARM's Integrator platform.
config ARCH_REALVIEW
bool "ARM Ltd. RealView family"
select ARM_AMBA
- select HAVE_CLK
select COMMON_CLKDEV
- select ICST307
- select GENERIC_TIME
+ select ICST
select GENERIC_CLOCKEVENTS
select ARCH_WANT_OPTIONAL_GPIOLIB
+ select PLAT_VERSATILE
+ select ARM_TIMER_SP804
select GPIO_PL061 if GPIOLIB
help
This enables support for ARM Ltd RealView boards.
bool "ARM Ltd. Versatile family"
select ARM_AMBA
select ARM_VIC
- select HAVE_CLK
select COMMON_CLKDEV
- select ICST307
- select GENERIC_TIME
+ select ICST
select GENERIC_CLOCKEVENTS
select ARCH_WANT_OPTIONAL_GPIOLIB
+ select PLAT_VERSATILE
+ select ARM_TIMER_SP804
help
This enables support for ARM Ltd Versatile board.
+config ARCH_VEXPRESS
+ bool "ARM Ltd. Versatile Express family"
+ select ARCH_WANT_OPTIONAL_GPIOLIB
+ select ARM_AMBA
+ select ARM_TIMER_SP804
+ select COMMON_CLKDEV
+ select GENERIC_CLOCKEVENTS
+ select HAVE_CLK
+ select ICST
+ select PLAT_VERSATILE
+ help
+ This enables support for the ARM Ltd Versatile Express boards.
+
config ARCH_AT91
bool "Atmel AT91"
- select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
select HAVE_CLK
+ select ARCH_USES_GETTIMEOFFSET
help
This enables support for systems based on the Atmel AT91RM9200,
AT91SAM9 and AT91CAP9 processors.
select CPU_V6
select ARM_AMBA
select COMMON_CLKDEV
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select ARCH_WANT_OPTIONAL_GPIOLIB
help
config ARCH_CLPS711X
bool "Cirrus Logic CLPS711x/EP721x-based"
select CPU_ARM720T
+ select ARCH_USES_GETTIMEOFFSET
help
Support for Cirrus Logic 711x/721x based boards.
+config ARCH_CNS3XXX
+ bool "Cavium Networks CNS3XXX family"
+ select CPU_V6
+ select GENERIC_CLOCKEVENTS
+ select ARM_GIC
+ help
+ Support for Cavium Networks CNS3XXX platform.
+
config ARCH_GEMINI
bool "Cortina Systems Gemini"
select CPU_FA526
- select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
+ select ARCH_USES_GETTIMEOFFSET
help
Support for the Cortina Systems Gemini family SoCs
select CPU_SA110
select ISA
select NO_IOPORT
+ select ARCH_USES_GETTIMEOFFSET
help
This is an evaluation board for the StrongARM processor available
from Digital. It has limited hardware on-board, including an
select CPU_ARM920T
select ARM_AMBA
select ARM_VIC
- select GENERIC_GPIO
- select HAVE_CLK
select COMMON_CLKDEV
select ARCH_REQUIRE_GPIOLIB
select ARCH_HAS_HOLES_MEMORYMODEL
+ select ARCH_USES_GETTIMEOFFSET
help
This enables support for the Cirrus EP93xx series of CPUs.
bool "FootBridge"
select CPU_SA110
select FOOTBRIDGE
+ select ARCH_USES_GETTIMEOFFSET
help
Support for systems based on the DC21285 companion chip
("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
config ARCH_MXC
bool "Freescale MXC/iMX-based"
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select ARCH_REQUIRE_GPIOLIB
- select HAVE_CLK
select COMMON_CLKDEV
help
Support for Freescale MXC/iMX-based family of processors
config ARCH_STMP3XXX
bool "Freescale STMP3xxx"
select CPU_ARM926T
- select HAVE_CLK
select COMMON_CLKDEV
select ARCH_REQUIRE_GPIOLIB
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
- select GENERIC_GPIO
select USB_ARCH_HAS_EHCI
help
Support for systems based on the Freescale 3xxx CPUs.
select CPU_ARM926T
select ARM_VIC
select GENERIC_CLOCKEVENTS
- select GENERIC_TIME
help
This enables support for systems based on the Hilscher NetX Soc
bool "Hynix HMS720x-based"
select CPU_ARM720T
select ISA_DMA_API
+ select ARCH_USES_GETTIMEOFFSET
help
This enables support for systems based on the Hynix HMS720x
select CPU_XSCALE
select PLAT_IOP
select PCI
- select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
help
Support for Intel's 80219 and IOP32X (XScale) family of
select CPU_XSCALE
select PLAT_IOP
select PCI
- select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
help
Support for Intel's IOP33X (XScale) family of processors.
depends on MMU
select CPU_XSC3
select PCI
+ select ARCH_USES_GETTIMEOFFSET
help
Support for Intel's IXP23xx (XScale) family of processors.
depends on MMU
select CPU_XSCALE
select PCI
+ select ARCH_USES_GETTIMEOFFSET
help
Support for Intel's IXP2400/2800 (XScale) family of processors.
depends on MMU
select CPU_XSCALE
select GENERIC_GPIO
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select DMABOUNCE if PCI
help
bool "LinkUp-L7200"
select CPU_ARM720T
select FIQ
+ select ARCH_USES_GETTIMEOFFSET
help
Say Y here if you intend to run this kernel on a LinkUp Systems
L7200 Software Development Board which uses an ARM720T processor.
config ARCH_DOVE
bool "Marvell Dove"
select PCI
- select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select PLAT_ORION
help
bool "Marvell Kirkwood"
select CPU_FEROCEON
select PCI
- select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select PLAT_ORION
help
config ARCH_LOKI
bool "Marvell Loki (88RC8480)"
select CPU_FEROCEON
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select PLAT_ORION
help
bool "Marvell MV78xx0"
select CPU_FEROCEON
select PCI
- select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select PLAT_ORION
help
depends on MMU
select CPU_FEROCEON
select PCI
- select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select PLAT_ORION
help
config ARCH_MMP
bool "Marvell PXA168/910/MMP2"
depends on MMU
- select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
- select HAVE_CLK
select COMMON_CLKDEV
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select TICK_ONESHOT
select PLAT_PXA
config ARCH_KS8695
bool "Micrel/Kendin KS8695"
select CPU_ARM922T
- select GENERIC_GPIO
- select ARCH_REQUIRE_GPIOLIB
+ select ARCH_REQUIRE_GPIOLIB
+ select ARCH_USES_GETTIMEOFFSET
help
Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
System-on-Chip devices.
bool "NetSilicon NS9xxx"
select CPU_ARM926T
select GENERIC_GPIO
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select HAVE_CLK
help
bool "Nuvoton W90X900 CPU"
select CPU_ARM926T
select ARCH_REQUIRE_GPIOLIB
- select GENERIC_GPIO
- select HAVE_CLK
select COMMON_CLKDEV
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
help
Support for Nuvoton (Winbond logic dept.) ARM9 processor,
config ARCH_NUC93X
bool "Nuvoton NUC93X CPU"
select CPU_ARM926T
- select HAVE_CLK
select COMMON_CLKDEV
help
Support for Nuvoton (Winbond logic dept.) NUC93X MCU,The NUC93X is a
config ARCH_PNX4008
bool "Philips Nexperia PNX4008 Mobile"
select CPU_ARM926T
- select HAVE_CLK
select COMMON_CLKDEV
+ select ARCH_USES_GETTIMEOFFSET
help
This enables support for Philips PNX4008 mobile platform.
depends on MMU
select ARCH_MTD_XIP
select ARCH_HAS_CPUFREQ
- select GENERIC_GPIO
- select HAVE_CLK
select COMMON_CLKDEV
select ARCH_REQUIRE_GPIOLIB
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select TICK_ONESHOT
select PLAT_PXA
config ARCH_MSM
bool "Qualcomm MSM"
- select CPU_V6
- select GENERIC_TIME
+ select HAVE_CLK
select GENERIC_CLOCKEVENTS
help
- Support for Qualcomm MSM7K based systems. This runs on the ARM11
- apps processor of the MSM7K and depends on a shared memory
- interface to the ARM9 modem processor which runs the baseband stack
- and controls some vital subsystems (clock and power control, etc).
+ Support for Qualcomm MSM/QSD based systems. This runs on the
+ apps processor of the MSM/QSD and depends on a shared memory
+ interface to the modem processor which runs the baseband
+ stack and controls some vital subsystems
+ (clock and power control, etc).
config ARCH_SHMOBILE
bool "Renesas SH-Mobile"
select ISA_DMA_API
select NO_IOPORT
select ARCH_SPARSEMEM_ENABLE
+ select ARCH_USES_GETTIMEOFFSET
help
On the Acorn Risc-PC, Linux can support the internal IDE disk and
CD-ROM interface, serial and parallel port, and the floppy drive.
select ARCH_MTD_XIP
select ARCH_HAS_CPUFREQ
select CPU_FREQ
- select GENERIC_GPIO
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select HAVE_CLK
select TICK_ONESHOT
Support for StrongARM 11x0 based boards.
config ARCH_S3C2410
- bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443"
+ bool "Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443, S3C2450"
select GENERIC_GPIO
select ARCH_HAS_CPUFREQ
select HAVE_CLK
+ select ARCH_USES_GETTIMEOFFSET
help
Samsung S3C2410X CPU based systems, such as the Simtec Electronics
BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
the Samsung SMDK2410 development board (and derivatives).
+ Note, the S3C2416 and the S3C2450 are so close that they even share
+ the same SoC ID code. This means that there is no seperate machine
+ directory (no arch/arm/mach-s3c2450) as the S3C2416 was first.
+
config ARCH_S3C64XX
bool "Samsung S3C64XX"
select PLAT_SAMSUNG
select CPU_V6
- select GENERIC_GPIO
select ARM_VIC
select HAVE_CLK
select NO_IOPORT
+ select ARCH_USES_GETTIMEOFFSET
select ARCH_HAS_CPUFREQ
select ARCH_REQUIRE_GPIOLIB
select SAMSUNG_CLKSRC
select ISA_DMA
select ZONE_DMA
select PCI
+ select ARCH_USES_GETTIMEOFFSET
help
Support for the StrongARM based Digital DNARD machine, also known
as "Shark" (<http://www.shark-linux.de/shark.html>).
select CPU_ARM922T
select ARCH_DISCONTIGMEM_ENABLE if !LH7A40X_CONTIGMEM
select ARCH_SPARSEMEM_ENABLE if !LH7A40X_CONTIGMEM
+ select ARCH_USES_GETTIMEOFFSET
help
Say Y here for systems based on one of the Sharp LH7A40X
System on a Chip processors. These CPUs include an ARM922T
select HAVE_TCM
select ARM_AMBA
select ARM_VIC
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
- select HAVE_CLK
select COMMON_CLKDEV
select GENERIC_GPIO
help
bool "ST-Ericsson U8500 Series"
select CPU_V7
select ARM_AMBA
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select COMMON_CLKDEV
+ select ARCH_REQUIRE_GPIOLIB
help
Support for ST-Ericsson's Ux500 architecture
select ARM_AMBA
select ARM_VIC
select CPU_ARM926T
- select HAVE_CLK
select COMMON_CLKDEV
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
- select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
help
Support for the Nomadik platform by ST-Ericsson
config ARCH_DAVINCI
bool "TI DaVinci"
select CPU_ARM926T
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
- select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
- select HAVE_CLK
select ZONE_DMA
select HAVE_IDE
select COMMON_CLKDEV
config ARCH_OMAP
bool "TI OMAP"
- select GENERIC_GPIO
select HAVE_CLK
select ARCH_REQUIRE_GPIOLIB
select ARCH_HAS_CPUFREQ
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select ARCH_HAS_HOLES_MEMORYMODEL
help
Support for TI's OMAP platform (OMAP1 and OMAP2).
+config PLAT_SPEAR
+ bool "ST SPEAr"
+ select ARM_AMBA
+ select ARCH_REQUIRE_GPIOLIB
+ select COMMON_CLKDEV
+ select GENERIC_CLOCKEVENTS
+ select HAVE_CLK
+ help
+ Support for ST's SPEAr platform (SPEAr3xx, SPEAr6xx and SPEAr13xx).
+
endchoice
#
source "arch/arm/mach-clps711x/Kconfig"
+source "arch/arm/mach-cns3xxx/Kconfig"
+
source "arch/arm/mach-davinci/Kconfig"
source "arch/arm/mach-dove/Kconfig"
source "arch/arm/plat-s3c24xx/Kconfig"
source "arch/arm/plat-s5p/Kconfig"
source "arch/arm/plat-s5pc1xx/Kconfig"
+source "arch/arm/plat-spear/Kconfig"
if ARCH_S3C2410
source "arch/arm/mach-s3c2400/Kconfig"
source "arch/arm/mach-s3c2410/Kconfig"
source "arch/arm/mach-s3c2412/Kconfig"
+source "arch/arm/mach-s3c2416/Kconfig"
source "arch/arm/mach-s3c2440/Kconfig"
source "arch/arm/mach-s3c2443/Kconfig"
endif
source "arch/arm/mach-versatile/Kconfig"
+source "arch/arm/mach-vexpress/Kconfig"
+
source "arch/arm/mach-w90x900/Kconfig"
# Definitions to make life easier
config PLAT_IOP
bool
select GENERIC_CLOCKEVENTS
- select GENERIC_TIME
config PLAT_ORION
bool
config PLAT_PXA
bool
+config PLAT_VERSATILE
+ bool
+
+config ARM_TIMER_SP804
+ bool
+
source arch/arm/mm/Kconfig
config IWMMXT
your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
VESA. If you have PCI, say Y, otherwise N.
+config PCI_DOMAINS
+ bool
+ depends on PCI
+
config PCI_SYSCALL
def_bool PCI
config SMP
bool "Symmetric Multi-Processing (EXPERIMENTAL)"
depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP ||\
- MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || ARCH_U8500)
+ MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 ||\
+ ARCH_U8500 || ARCH_VEXPRESS_CA9X4)
depends on GENERIC_CLOCKEVENTS
select USE_GENERIC_SMP_HELPERS
- select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500)
+ select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500 || ARCH_VEXPRESS_CA9X4)
help
This enables support for systems with more than one CPU. If you have
a system with only one CPU, like most personal computers, say N. If
config HW_PERF_EVENTS
bool "Enable hardware performance counter support for perf events"
- depends on PERF_EVENTS && CPU_HAS_PMU && (CPU_V6 || CPU_V7)
+ depends on PERF_EVENTS && CPU_HAS_PMU
default y
help
Enable hardware performance counter support for perf events. If
machine-$(CONFIG_ARCH_AT91) := at91
machine-$(CONFIG_ARCH_BCMRING) := bcmring
machine-$(CONFIG_ARCH_CLPS711X) := clps711x
+machine-$(CONFIG_ARCH_CNS3XXX) := cns3xxx
machine-$(CONFIG_ARCH_DAVINCI) := davinci
machine-$(CONFIG_ARCH_DOVE) := dove
machine-$(CONFIG_ARCH_EBSA110) := ebsa110
machine-$(CONFIG_ARCH_PXA) := pxa
machine-$(CONFIG_ARCH_REALVIEW) := realview
machine-$(CONFIG_ARCH_RPC) := rpc
-machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2440 s3c2443
+machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2416 s3c2440 s3c2443
machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0
machine-$(CONFIG_ARCH_S3C64XX) := s3c64xx
machine-$(CONFIG_ARCH_S5P6440) := s5p6440
machine-$(CONFIG_ARCH_U300) := u300
machine-$(CONFIG_ARCH_U8500) := ux500
machine-$(CONFIG_ARCH_VERSATILE) := versatile
+machine-$(CONFIG_ARCH_VEXPRESS) := vexpress
machine-$(CONFIG_ARCH_W90X900) := w90x900
machine-$(CONFIG_ARCH_NUC93X) := nuc93x
machine-$(CONFIG_FOOTBRIDGE) := footbridge
+machine-$(CONFIG_MACH_SPEAR300) := spear3xx
+machine-$(CONFIG_MACH_SPEAR310) := spear3xx
+machine-$(CONFIG_MACH_SPEAR320) := spear3xx
+machine-$(CONFIG_MACH_SPEAR600) := spear6xx
# Platform directory name. This list is sorted alphanumerically
# by CONFIG_* macro name.
plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx samsung
plat-$(CONFIG_PLAT_S5PC1XX) := s5pc1xx samsung
plat-$(CONFIG_PLAT_S5P) := s5p samsung
+plat-$(CONFIG_PLAT_SPEAR) := spear
+plat-$(CONFIG_PLAT_VERSATILE) := versatile
ifeq ($(CONFIG_ARCH_EBSA110),y)
# This is what happens if you forget the IOCS16 line.
suffix_$(CONFIG_KERNEL_GZIP) = gzip
suffix_$(CONFIG_KERNEL_LZO) = lzo
+suffix_$(CONFIG_KERNEL_LZMA) = lzma
targets := vmlinux vmlinux.lds \
piggy.$(suffix_y) piggy.$(suffix_y).o \
#include "../../../../lib/decompress_unlzo.c"
#endif
+#ifdef CONFIG_KERNEL_LZMA
+#include "../../../../lib/decompress_unlzma.c"
+#endif
+
void do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x))
{
decompress(input, len, NULL, NULL, output, NULL, error);
--- /dev/null
+ .section .piggydata,#alloc
+ .globl input_data
+input_data:
+ .incbin "arch/arm/boot/compressed/piggy.lzma"
+ .globl input_data_end
+input_data_end:
The maximum number of VICs available in the system, for
power management.
-config ICST525
+config ICST
bool
-config ICST307
+config PL330
bool
config SA1111
config COMMON_CLKDEV
bool
+ select HAVE_CLK
obj-$(CONFIG_ARM_GIC) += gic.o
obj-$(CONFIG_ARM_VIC) += vic.o
-obj-$(CONFIG_ICST525) += icst525.o
-obj-$(CONFIG_ICST307) += icst307.o
+obj-$(CONFIG_ICST) += icst.o
+obj-$(CONFIG_PL330) += pl330.o
obj-$(CONFIG_SA1111) += sa1111.o
obj-$(CONFIG_PCI_HOST_VIA82C505) += via82c505.o
obj-$(CONFIG_DMABOUNCE) += dmabounce.o
continue;
match += 1;
}
- if (match == 0)
- continue;
if (match > best) {
clk = p->clk;
- best = match;
+ if (match != 3)
+ best = match;
+ else
+ break;
}
}
return clk;
--- /dev/null
+/*
+ * linux/arch/arm/common/icst307.c
+ *
+ * Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Support functions for calculating clocks/divisors for the ICST307
+ * clock generators. See http://www.icst.com/ for more information
+ * on these devices.
+ *
+ * This is an almost identical implementation to the ICST525 clock generator.
+ * The s2div and idx2s files are different
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+
+#include <asm/hardware/icst.h>
+
+/*
+ * Divisors for each OD setting.
+ */
+const unsigned char icst307_s2div[8] = { 10, 2, 8, 4, 5, 7, 3, 6 };
+const unsigned char icst525_s2div[8] = { 10, 2, 8, 4, 5, 7, 9, 6 };
+EXPORT_SYMBOL(icst307_s2div);
+EXPORT_SYMBOL(icst525_s2div);
+
+unsigned long icst_hz(const struct icst_params *p, struct icst_vco vco)
+{
+ return p->ref * 2 * (vco.v + 8) / ((vco.r + 2) * p->s2div[vco.s]);
+}
+
+EXPORT_SYMBOL(icst_hz);
+
+/*
+ * Ascending divisor S values.
+ */
+const unsigned char icst307_idx2s[8] = { 1, 6, 3, 4, 7, 5, 2, 0 };
+const unsigned char icst525_idx2s[8] = { 1, 3, 4, 7, 5, 2, 6, 0 };
+EXPORT_SYMBOL(icst307_idx2s);
+EXPORT_SYMBOL(icst525_idx2s);
+
+struct icst_vco
+icst_hz_to_vco(const struct icst_params *p, unsigned long freq)
+{
+ struct icst_vco vco = { .s = 1, .v = p->vd_max, .r = p->rd_max };
+ unsigned long f;
+ unsigned int i = 0, rd, best = (unsigned int)-1;
+
+ /*
+ * First, find the PLL output divisor such
+ * that the PLL output is within spec.
+ */
+ do {
+ f = freq * p->s2div[p->idx2s[i]];
+
+ if (f > p->vco_min && f <= p->vco_max)
+ break;
+ } while (i < 8);
+
+ if (i >= 8)
+ return vco;
+
+ vco.s = p->idx2s[i];
+
+ /*
+ * Now find the closest divisor combination
+ * which gives a PLL output of 'f'.
+ */
+ for (rd = p->rd_min; rd <= p->rd_max; rd++) {
+ unsigned long fref_div, f_pll;
+ unsigned int vd;
+ int f_diff;
+
+ fref_div = (2 * p->ref) / rd;
+
+ vd = (f + fref_div / 2) / fref_div;
+ if (vd < p->vd_min || vd > p->vd_max)
+ continue;
+
+ f_pll = fref_div * vd;
+ f_diff = f_pll - f;
+ if (f_diff < 0)
+ f_diff = -f_diff;
+
+ if ((unsigned)f_diff < best) {
+ vco.v = vd - 8;
+ vco.r = rd - 2;
+ if (f_diff == 0)
+ break;
+ best = f_diff;
+ }
+ }
+
+ return vco;
+}
+
+EXPORT_SYMBOL(icst_hz_to_vco);
+++ /dev/null
-/*
- * linux/arch/arm/common/icst307.c
- *
- * Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Support functions for calculating clocks/divisors for the ICST307
- * clock generators. See http://www.icst.com/ for more information
- * on these devices.
- *
- * This is an almost identical implementation to the ICST525 clock generator.
- * The s2div and idx2s files are different
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-
-#include <asm/hardware/icst307.h>
-
-/*
- * Divisors for each OD setting.
- */
-static unsigned char s2div[8] = { 10, 2, 8, 4, 5, 7, 3, 6 };
-
-unsigned long icst307_khz(const struct icst307_params *p, struct icst307_vco vco)
-{
- return p->ref * 2 * (vco.v + 8) / ((vco.r + 2) * s2div[vco.s]);
-}
-
-EXPORT_SYMBOL(icst307_khz);
-
-/*
- * Ascending divisor S values.
- */
-static unsigned char idx2s[8] = { 1, 6, 3, 4, 7, 5, 2, 0 };
-
-struct icst307_vco
-icst307_khz_to_vco(const struct icst307_params *p, unsigned long freq)
-{
- struct icst307_vco vco = { .s = 1, .v = p->vd_max, .r = p->rd_max };
- unsigned long f;
- unsigned int i = 0, rd, best = (unsigned int)-1;
-
- /*
- * First, find the PLL output divisor such
- * that the PLL output is within spec.
- */
- do {
- f = freq * s2div[idx2s[i]];
-
- /*
- * f must be between 6MHz and 200MHz (3.3 or 5V)
- */
- if (f > 6000 && f <= p->vco_max)
- break;
- } while (i < ARRAY_SIZE(idx2s));
-
- if (i >= ARRAY_SIZE(idx2s))
- return vco;
-
- vco.s = idx2s[i];
-
- /*
- * Now find the closest divisor combination
- * which gives a PLL output of 'f'.
- */
- for (rd = p->rd_min; rd <= p->rd_max; rd++) {
- unsigned long fref_div, f_pll;
- unsigned int vd;
- int f_diff;
-
- fref_div = (2 * p->ref) / rd;
-
- vd = (f + fref_div / 2) / fref_div;
- if (vd < p->vd_min || vd > p->vd_max)
- continue;
-
- f_pll = fref_div * vd;
- f_diff = f_pll - f;
- if (f_diff < 0)
- f_diff = -f_diff;
-
- if ((unsigned)f_diff < best) {
- vco.v = vd - 8;
- vco.r = rd - 2;
- if (f_diff == 0)
- break;
- best = f_diff;
- }
- }
-
- return vco;
-}
-
-EXPORT_SYMBOL(icst307_khz_to_vco);
-
-struct icst307_vco
-icst307_ps_to_vco(const struct icst307_params *p, unsigned long period)
-{
- struct icst307_vco vco = { .s = 1, .v = p->vd_max, .r = p->rd_max };
- unsigned long f, ps;
- unsigned int i = 0, rd, best = (unsigned int)-1;
-
- ps = 1000000000UL / p->vco_max;
-
- /*
- * First, find the PLL output divisor such
- * that the PLL output is within spec.
- */
- do {
- f = period / s2div[idx2s[i]];
-
- /*
- * f must be between 6MHz and 200MHz (3.3 or 5V)
- */
- if (f >= ps && f < 1000000000UL / 6000 + 1)
- break;
- } while (i < ARRAY_SIZE(idx2s));
-
- if (i >= ARRAY_SIZE(idx2s))
- return vco;
-
- vco.s = idx2s[i];
-
- ps = 500000000UL / p->ref;
-
- /*
- * Now find the closest divisor combination
- * which gives a PLL output of 'f'.
- */
- for (rd = p->rd_min; rd <= p->rd_max; rd++) {
- unsigned long f_in_div, f_pll;
- unsigned int vd;
- int f_diff;
-
- f_in_div = ps * rd;
-
- vd = (f_in_div + f / 2) / f;
- if (vd < p->vd_min || vd > p->vd_max)
- continue;
-
- f_pll = (f_in_div + vd / 2) / vd;
- f_diff = f_pll - f;
- if (f_diff < 0)
- f_diff = -f_diff;
-
- if ((unsigned)f_diff < best) {
- vco.v = vd - 8;
- vco.r = rd - 2;
- if (f_diff == 0)
- break;
- best = f_diff;
- }
- }
-
- return vco;
-}
-
-EXPORT_SYMBOL(icst307_ps_to_vco);
+++ /dev/null
-/*
- * linux/arch/arm/common/icst525.c
- *
- * Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Support functions for calculating clocks/divisors for the ICST525
- * clock generators. See http://www.icst.com/ for more information
- * on these devices.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-
-#include <asm/hardware/icst525.h>
-
-/*
- * Divisors for each OD setting.
- */
-static unsigned char s2div[8] = { 10, 2, 8, 4, 5, 7, 9, 6 };
-
-unsigned long icst525_khz(const struct icst525_params *p, struct icst525_vco vco)
-{
- return p->ref * 2 * (vco.v + 8) / ((vco.r + 2) * s2div[vco.s]);
-}
-
-EXPORT_SYMBOL(icst525_khz);
-
-/*
- * Ascending divisor S values.
- */
-static unsigned char idx2s[] = { 1, 3, 4, 7, 5, 2, 6, 0 };
-
-struct icst525_vco
-icst525_khz_to_vco(const struct icst525_params *p, unsigned long freq)
-{
- struct icst525_vco vco = { .s = 1, .v = p->vd_max, .r = p->rd_max };
- unsigned long f;
- unsigned int i = 0, rd, best = (unsigned int)-1;
-
- /*
- * First, find the PLL output divisor such
- * that the PLL output is within spec.
- */
- do {
- f = freq * s2div[idx2s[i]];
-
- /*
- * f must be between 10MHz and
- * 320MHz (5V) or 200MHz (3V)
- */
- if (f > 10000 && f <= p->vco_max)
- break;
- } while (i < ARRAY_SIZE(idx2s));
-
- if (i >= ARRAY_SIZE(idx2s))
- return vco;
-
- vco.s = idx2s[i];
-
- /*
- * Now find the closest divisor combination
- * which gives a PLL output of 'f'.
- */
- for (rd = p->rd_min; rd <= p->rd_max; rd++) {
- unsigned long fref_div, f_pll;
- unsigned int vd;
- int f_diff;
-
- fref_div = (2 * p->ref) / rd;
-
- vd = (f + fref_div / 2) / fref_div;
- if (vd < p->vd_min || vd > p->vd_max)
- continue;
-
- f_pll = fref_div * vd;
- f_diff = f_pll - f;
- if (f_diff < 0)
- f_diff = -f_diff;
-
- if ((unsigned)f_diff < best) {
- vco.v = vd - 8;
- vco.r = rd - 2;
- if (f_diff == 0)
- break;
- best = f_diff;
- }
- }
-
- return vco;
-}
-
-EXPORT_SYMBOL(icst525_khz_to_vco);
-
-struct icst525_vco
-icst525_ps_to_vco(const struct icst525_params *p, unsigned long period)
-{
- struct icst525_vco vco = { .s = 1, .v = p->vd_max, .r = p->rd_max };
- unsigned long f, ps;
- unsigned int i = 0, rd, best = (unsigned int)-1;
-
- ps = 1000000000UL / p->vco_max;
-
- /*
- * First, find the PLL output divisor such
- * that the PLL output is within spec.
- */
- do {
- f = period / s2div[idx2s[i]];
-
- /*
- * f must be between 10MHz and
- * 320MHz (5V) or 200MHz (3V)
- */
- if (f >= ps && f < 100000)
- break;
- } while (i < ARRAY_SIZE(idx2s));
-
- if (i >= ARRAY_SIZE(idx2s))
- return vco;
-
- vco.s = idx2s[i];
-
- ps = 500000000UL / p->ref;
-
- /*
- * Now find the closest divisor combination
- * which gives a PLL output of 'f'.
- */
- for (rd = p->rd_min; rd <= p->rd_max; rd++) {
- unsigned long f_in_div, f_pll;
- unsigned int vd;
- int f_diff;
-
- f_in_div = ps * rd;
-
- vd = (f_in_div + f / 2) / f;
- if (vd < p->vd_min || vd > p->vd_max)
- continue;
-
- f_pll = (f_in_div + vd / 2) / vd;
- f_diff = f_pll - f;
- if (f_diff < 0)
- f_diff = -f_diff;
-
- if ((unsigned)f_diff < best) {
- vco.v = vd - 8;
- vco.r = rd - 2;
- if (f_diff == 0)
- break;
- best = f_diff;
- }
- }
-
- return vco;
-}
-
-EXPORT_SYMBOL(icst525_ps_to_vco);
--- /dev/null
+/* linux/arch/arm/common/pl330.c
+ *
+ * Copyright (C) 2010 Samsung Electronics Co Ltd.
+ * Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/hardware/pl330.h>
+
+/* Register and Bit field Definitions */
+#define DS 0x0
+#define DS_ST_STOP 0x0
+#define DS_ST_EXEC 0x1
+#define DS_ST_CMISS 0x2
+#define DS_ST_UPDTPC 0x3
+#define DS_ST_WFE 0x4
+#define DS_ST_ATBRR 0x5
+#define DS_ST_QBUSY 0x6
+#define DS_ST_WFP 0x7
+#define DS_ST_KILL 0x8
+#define DS_ST_CMPLT 0x9
+#define DS_ST_FLTCMP 0xe
+#define DS_ST_FAULT 0xf
+
+#define DPC 0x4
+#define INTEN 0x20
+#define ES 0x24
+#define INTSTATUS 0x28
+#define INTCLR 0x2c
+#define FSM 0x30
+#define FSC 0x34
+#define FTM 0x38
+
+#define _FTC 0x40
+#define FTC(n) (_FTC + (n)*0x4)
+
+#define _CS 0x100
+#define CS(n) (_CS + (n)*0x8)
+#define CS_CNS (1 << 21)
+
+#define _CPC 0x104
+#define CPC(n) (_CPC + (n)*0x8)
+
+#define _SA 0x400
+#define SA(n) (_SA + (n)*0x20)
+
+#define _DA 0x404
+#define DA(n) (_DA + (n)*0x20)
+
+#define _CC 0x408
+#define CC(n) (_CC + (n)*0x20)
+
+#define CC_SRCINC (1 << 0)
+#define CC_DSTINC (1 << 14)
+#define CC_SRCPRI (1 << 8)
+#define CC_DSTPRI (1 << 22)
+#define CC_SRCNS (1 << 9)
+#define CC_DSTNS (1 << 23)
+#define CC_SRCIA (1 << 10)
+#define CC_DSTIA (1 << 24)
+#define CC_SRCBRSTLEN_SHFT 4
+#define CC_DSTBRSTLEN_SHFT 18
+#define CC_SRCBRSTSIZE_SHFT 1
+#define CC_DSTBRSTSIZE_SHFT 15
+#define CC_SRCCCTRL_SHFT 11
+#define CC_SRCCCTRL_MASK 0x7
+#define CC_DSTCCTRL_SHFT 25
+#define CC_DRCCCTRL_MASK 0x7
+#define CC_SWAP_SHFT 28
+
+#define _LC0 0x40c
+#define LC0(n) (_LC0 + (n)*0x20)
+
+#define _LC1 0x410
+#define LC1(n) (_LC1 + (n)*0x20)
+
+#define DBGSTATUS 0xd00
+#define DBG_BUSY (1 << 0)
+
+#define DBGCMD 0xd04
+#define DBGINST0 0xd08
+#define DBGINST1 0xd0c
+
+#define CR0 0xe00
+#define CR1 0xe04
+#define CR2 0xe08
+#define CR3 0xe0c
+#define CR4 0xe10
+#define CRD 0xe14
+
+#define PERIPH_ID 0xfe0
+#define PCELL_ID 0xff0
+
+#define CR0_PERIPH_REQ_SET (1 << 0)
+#define CR0_BOOT_EN_SET (1 << 1)
+#define CR0_BOOT_MAN_NS (1 << 2)
+#define CR0_NUM_CHANS_SHIFT 4
+#define CR0_NUM_CHANS_MASK 0x7
+#define CR0_NUM_PERIPH_SHIFT 12
+#define CR0_NUM_PERIPH_MASK 0x1f
+#define CR0_NUM_EVENTS_SHIFT 17
+#define CR0_NUM_EVENTS_MASK 0x1f
+
+#define CR1_ICACHE_LEN_SHIFT 0
+#define CR1_ICACHE_LEN_MASK 0x7
+#define CR1_NUM_ICACHELINES_SHIFT 4
+#define CR1_NUM_ICACHELINES_MASK 0xf
+
+#define CRD_DATA_WIDTH_SHIFT 0
+#define CRD_DATA_WIDTH_MASK 0x7
+#define CRD_WR_CAP_SHIFT 4
+#define CRD_WR_CAP_MASK 0x7
+#define CRD_WR_Q_DEP_SHIFT 8
+#define CRD_WR_Q_DEP_MASK 0xf
+#define CRD_RD_CAP_SHIFT 12
+#define CRD_RD_CAP_MASK 0x7
+#define CRD_RD_Q_DEP_SHIFT 16
+#define CRD_RD_Q_DEP_MASK 0xf
+#define CRD_DATA_BUFF_SHIFT 20
+#define CRD_DATA_BUFF_MASK 0x3ff
+
+#define PART 0x330
+#define DESIGNER 0x41
+#define REVISION 0x0
+#define INTEG_CFG 0x0
+#define PERIPH_ID_VAL ((PART << 0) | (DESIGNER << 12) \
+ | (REVISION << 20) | (INTEG_CFG << 24))
+
+#define PCELL_ID_VAL 0xb105f00d
+
+#define PL330_STATE_STOPPED (1 << 0)
+#define PL330_STATE_EXECUTING (1 << 1)
+#define PL330_STATE_WFE (1 << 2)
+#define PL330_STATE_FAULTING (1 << 3)
+#define PL330_STATE_COMPLETING (1 << 4)
+#define PL330_STATE_WFP (1 << 5)
+#define PL330_STATE_KILLING (1 << 6)
+#define PL330_STATE_FAULT_COMPLETING (1 << 7)
+#define PL330_STATE_CACHEMISS (1 << 8)
+#define PL330_STATE_UPDTPC (1 << 9)
+#define PL330_STATE_ATBARRIER (1 << 10)
+#define PL330_STATE_QUEUEBUSY (1 << 11)
+#define PL330_STATE_INVALID (1 << 15)
+
+#define PL330_STABLE_STATES (PL330_STATE_STOPPED | PL330_STATE_EXECUTING \
+ | PL330_STATE_WFE | PL330_STATE_FAULTING)
+
+#define CMD_DMAADDH 0x54
+#define CMD_DMAEND 0x00
+#define CMD_DMAFLUSHP 0x35
+#define CMD_DMAGO 0xa0
+#define CMD_DMALD 0x04
+#define CMD_DMALDP 0x25
+#define CMD_DMALP 0x20
+#define CMD_DMALPEND 0x28
+#define CMD_DMAKILL 0x01
+#define CMD_DMAMOV 0xbc
+#define CMD_DMANOP 0x18
+#define CMD_DMARMB 0x12
+#define CMD_DMASEV 0x34
+#define CMD_DMAST 0x08
+#define CMD_DMASTP 0x29
+#define CMD_DMASTZ 0x0c
+#define CMD_DMAWFE 0x36
+#define CMD_DMAWFP 0x30
+#define CMD_DMAWMB 0x13
+
+#define SZ_DMAADDH 3
+#define SZ_DMAEND 1
+#define SZ_DMAFLUSHP 2
+#define SZ_DMALD 1
+#define SZ_DMALDP 2
+#define SZ_DMALP 2
+#define SZ_DMALPEND 2
+#define SZ_DMAKILL 1
+#define SZ_DMAMOV 6
+#define SZ_DMANOP 1
+#define SZ_DMARMB 1
+#define SZ_DMASEV 2
+#define SZ_DMAST 1
+#define SZ_DMASTP 2
+#define SZ_DMASTZ 1
+#define SZ_DMAWFE 2
+#define SZ_DMAWFP 2
+#define SZ_DMAWMB 1
+#define SZ_DMAGO 6
+
+#define BRST_LEN(ccr) ((((ccr) >> CC_SRCBRSTLEN_SHFT) & 0xf) + 1)
+#define BRST_SIZE(ccr) (1 << (((ccr) >> CC_SRCBRSTSIZE_SHFT) & 0x7))
+
+#define BYTE_TO_BURST(b, ccr) ((b) / BRST_SIZE(ccr) / BRST_LEN(ccr))
+#define BURST_TO_BYTE(c, ccr) ((c) * BRST_SIZE(ccr) * BRST_LEN(ccr))
+
+/*
+ * With 256 bytes, we can do more than 2.5MB and 5MB xfers per req
+ * at 1byte/burst for P<->M and M<->M respectively.
+ * For typical scenario, at 1word/burst, 10MB and 20MB xfers per req
+ * should be enough for P<->M and M<->M respectively.
+ */
+#define MCODE_BUFF_PER_REQ 256
+
+/*
+ * Mark a _pl330_req as free.
+ * We do it by writing DMAEND as the first instruction
+ * because no valid request is going to have DMAEND as
+ * its first instruction to execute.
+ */
+#define MARK_FREE(req) do { \
+ _emit_END(0, (req)->mc_cpu); \
+ (req)->mc_len = 0; \
+ } while (0)
+
+/* If the _pl330_req is available to the client */
+#define IS_FREE(req) (*((u8 *)((req)->mc_cpu)) == CMD_DMAEND)
+
+/* Use this _only_ to wait on transient states */
+#define UNTIL(t, s) while (!(_state(t) & (s))) cpu_relax();
+
+#ifdef PL330_DEBUG_MCGEN
+static unsigned cmd_line;
+#define PL330_DBGCMD_DUMP(off, x...) do { \
+ printk("%x:", cmd_line); \
+ printk(x); \
+ cmd_line += off; \
+ } while (0)
+#define PL330_DBGMC_START(addr) (cmd_line = addr)
+#else
+#define PL330_DBGCMD_DUMP(off, x...) do {} while (0)
+#define PL330_DBGMC_START(addr) do {} while (0)
+#endif
+
+struct _xfer_spec {
+ u32 ccr;
+ struct pl330_req *r;
+ struct pl330_xfer *x;
+};
+
+enum dmamov_dst {
+ SAR = 0,
+ CCR,
+ DAR,
+};
+
+enum pl330_dst {
+ SRC = 0,
+ DST,
+};
+
+enum pl330_cond {
+ SINGLE,
+ BURST,
+ ALWAYS,
+};
+
+struct _pl330_req {
+ u32 mc_bus;
+ void *mc_cpu;
+ /* Number of bytes taken to setup MC for the req */
+ u32 mc_len;
+ struct pl330_req *r;
+ /* Hook to attach to DMAC's list of reqs with due callback */
+ struct list_head rqd;
+};
+
+/* ToBeDone for tasklet */
+struct _pl330_tbd {
+ bool reset_dmac;
+ bool reset_mngr;
+ u8 reset_chan;
+};
+
+/* A DMAC Thread */
+struct pl330_thread {
+ u8 id;
+ int ev;
+ /* If the channel is not yet acquired by any client */
+ bool free;
+ /* Parent DMAC */
+ struct pl330_dmac *dmac;
+ /* Only two at a time */
+ struct _pl330_req req[2];
+ /* Index of the last submitted request */
+ unsigned lstenq;
+};
+
+enum pl330_dmac_state {
+ UNINIT,
+ INIT,
+ DYING,
+};
+
+/* A DMAC */
+struct pl330_dmac {
+ spinlock_t lock;
+ /* Holds list of reqs with due callbacks */
+ struct list_head req_done;
+ /* Pointer to platform specific stuff */
+ struct pl330_info *pinfo;
+ /* Maximum possible events/irqs */
+ int events[32];
+ /* BUS address of MicroCode buffer */
+ u32 mcode_bus;
+ /* CPU address of MicroCode buffer */
+ void *mcode_cpu;
+ /* List of all Channel threads */
+ struct pl330_thread *channels;
+ /* Pointer to the MANAGER thread */
+ struct pl330_thread *manager;
+ /* To handle bad news in interrupt */
+ struct tasklet_struct tasks;
+ struct _pl330_tbd dmac_tbd;
+ /* State of DMAC operation */
+ enum pl330_dmac_state state;
+};
+
+static inline void _callback(struct pl330_req *r, enum pl330_op_err err)
+{
+ if (r && r->xfer_cb)
+ r->xfer_cb(r->token, err);
+}
+
+static inline bool _queue_empty(struct pl330_thread *thrd)
+{
+ return (IS_FREE(&thrd->req[0]) && IS_FREE(&thrd->req[1]))
+ ? true : false;
+}
+
+static inline bool _queue_full(struct pl330_thread *thrd)
+{
+ return (IS_FREE(&thrd->req[0]) || IS_FREE(&thrd->req[1]))
+ ? false : true;
+}
+
+static inline bool is_manager(struct pl330_thread *thrd)
+{
+ struct pl330_dmac *pl330 = thrd->dmac;
+
+ /* MANAGER is indexed at the end */
+ if (thrd->id == pl330->pinfo->pcfg.num_chan)
+ return true;
+ else
+ return false;
+}
+
+/* If manager of the thread is in Non-Secure mode */
+static inline bool _manager_ns(struct pl330_thread *thrd)
+{
+ struct pl330_dmac *pl330 = thrd->dmac;
+
+ return (pl330->pinfo->pcfg.mode & DMAC_MODE_NS) ? true : false;
+}
+
+static inline u32 get_id(struct pl330_info *pi, u32 off)
+{
+ void __iomem *regs = pi->base;
+ u32 id = 0;
+
+ id |= (readb(regs + off + 0x0) << 0);
+ id |= (readb(regs + off + 0x4) << 8);
+ id |= (readb(regs + off + 0x8) << 16);
+ id |= (readb(regs + off + 0xc) << 24);
+
+ return id;
+}
+
+static inline u32 _emit_ADDH(unsigned dry_run, u8 buf[],
+ enum pl330_dst da, u16 val)
+{
+ if (dry_run)
+ return SZ_DMAADDH;
+
+ buf[0] = CMD_DMAADDH;
+ buf[0] |= (da << 1);
+ *((u16 *)&buf[1]) = val;
+
+ PL330_DBGCMD_DUMP(SZ_DMAADDH, "\tDMAADDH %s %u\n",
+ da == 1 ? "DA" : "SA", val);
+
+ return SZ_DMAADDH;
+}
+
+static inline u32 _emit_END(unsigned dry_run, u8 buf[])
+{
+ if (dry_run)
+ return SZ_DMAEND;
+
+ buf[0] = CMD_DMAEND;
+
+ PL330_DBGCMD_DUMP(SZ_DMAEND, "\tDMAEND\n");
+
+ return SZ_DMAEND;
+}
+
+static inline u32 _emit_FLUSHP(unsigned dry_run, u8 buf[], u8 peri)
+{
+ if (dry_run)
+ return SZ_DMAFLUSHP;
+
+ buf[0] = CMD_DMAFLUSHP;
+
+ peri &= 0x1f;
+ peri <<= 3;
+ buf[1] = peri;
+
+ PL330_DBGCMD_DUMP(SZ_DMAFLUSHP, "\tDMAFLUSHP %u\n", peri >> 3);
+
+ return SZ_DMAFLUSHP;
+}
+
+static inline u32 _emit_LD(unsigned dry_run, u8 buf[], enum pl330_cond cond)
+{
+ if (dry_run)
+ return SZ_DMALD;
+
+ buf[0] = CMD_DMALD;
+
+ if (cond == SINGLE)
+ buf[0] |= (0 << 1) | (1 << 0);
+ else if (cond == BURST)
+ buf[0] |= (1 << 1) | (1 << 0);
+
+ PL330_DBGCMD_DUMP(SZ_DMALD, "\tDMALD%c\n",
+ cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'));
+
+ return SZ_DMALD;
+}
+
+static inline u32 _emit_LDP(unsigned dry_run, u8 buf[],
+ enum pl330_cond cond, u8 peri)
+{
+ if (dry_run)
+ return SZ_DMALDP;
+
+ buf[0] = CMD_DMALDP;
+
+ if (cond == BURST)
+ buf[0] |= (1 << 1);
+
+ peri &= 0x1f;
+ peri <<= 3;
+ buf[1] = peri;
+
+ PL330_DBGCMD_DUMP(SZ_DMALDP, "\tDMALDP%c %u\n",
+ cond == SINGLE ? 'S' : 'B', peri >> 3);
+
+ return SZ_DMALDP;
+}
+
+static inline u32 _emit_LP(unsigned dry_run, u8 buf[],
+ unsigned loop, u8 cnt)
+{
+ if (dry_run)
+ return SZ_DMALP;
+
+ buf[0] = CMD_DMALP;
+
+ if (loop)
+ buf[0] |= (1 << 1);
+
+ cnt--; /* DMAC increments by 1 internally */
+ buf[1] = cnt;
+
+ PL330_DBGCMD_DUMP(SZ_DMALP, "\tDMALP_%c %u\n", loop ? '1' : '0', cnt);
+
+ return SZ_DMALP;
+}
+
+struct _arg_LPEND {
+ enum pl330_cond cond;
+ bool forever;
+ unsigned loop;
+ u8 bjump;
+};
+
+static inline u32 _emit_LPEND(unsigned dry_run, u8 buf[],
+ const struct _arg_LPEND *arg)
+{
+ enum pl330_cond cond = arg->cond;
+ bool forever = arg->forever;
+ unsigned loop = arg->loop;
+ u8 bjump = arg->bjump;
+
+ if (dry_run)
+ return SZ_DMALPEND;
+
+ buf[0] = CMD_DMALPEND;
+
+ if (loop)
+ buf[0] |= (1 << 2);
+
+ if (!forever)
+ buf[0] |= (1 << 4);
+
+ if (cond == SINGLE)
+ buf[0] |= (0 << 1) | (1 << 0);
+ else if (cond == BURST)
+ buf[0] |= (1 << 1) | (1 << 0);
+
+ buf[1] = bjump;
+
+ PL330_DBGCMD_DUMP(SZ_DMALPEND, "\tDMALP%s%c_%c bjmpto_%x\n",
+ forever ? "FE" : "END",
+ cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'),
+ loop ? '1' : '0',
+ bjump);
+
+ return SZ_DMALPEND;
+}
+
+static inline u32 _emit_KILL(unsigned dry_run, u8 buf[])
+{
+ if (dry_run)
+ return SZ_DMAKILL;
+
+ buf[0] = CMD_DMAKILL;
+
+ return SZ_DMAKILL;
+}
+
+static inline u32 _emit_MOV(unsigned dry_run, u8 buf[],
+ enum dmamov_dst dst, u32 val)
+{
+ if (dry_run)
+ return SZ_DMAMOV;
+
+ buf[0] = CMD_DMAMOV;
+ buf[1] = dst;
+ *((u32 *)&buf[2]) = val;
+
+ PL330_DBGCMD_DUMP(SZ_DMAMOV, "\tDMAMOV %s 0x%x\n",
+ dst == SAR ? "SAR" : (dst == DAR ? "DAR" : "CCR"), val);
+
+ return SZ_DMAMOV;
+}
+
+static inline u32 _emit_NOP(unsigned dry_run, u8 buf[])
+{
+ if (dry_run)
+ return SZ_DMANOP;
+
+ buf[0] = CMD_DMANOP;
+
+ PL330_DBGCMD_DUMP(SZ_DMANOP, "\tDMANOP\n");
+
+ return SZ_DMANOP;
+}
+
+static inline u32 _emit_RMB(unsigned dry_run, u8 buf[])
+{
+ if (dry_run)
+ return SZ_DMARMB;
+
+ buf[0] = CMD_DMARMB;
+
+ PL330_DBGCMD_DUMP(SZ_DMARMB, "\tDMARMB\n");
+
+ return SZ_DMARMB;
+}
+
+static inline u32 _emit_SEV(unsigned dry_run, u8 buf[], u8 ev)
+{
+ if (dry_run)
+ return SZ_DMASEV;
+
+ buf[0] = CMD_DMASEV;
+
+ ev &= 0x1f;
+ ev <<= 3;
+ buf[1] = ev;
+
+ PL330_DBGCMD_DUMP(SZ_DMASEV, "\tDMASEV %u\n", ev >> 3);
+
+ return SZ_DMASEV;
+}
+
+static inline u32 _emit_ST(unsigned dry_run, u8 buf[], enum pl330_cond cond)
+{
+ if (dry_run)
+ return SZ_DMAST;
+
+ buf[0] = CMD_DMAST;
+
+ if (cond == SINGLE)
+ buf[0] |= (0 << 1) | (1 << 0);
+ else if (cond == BURST)
+ buf[0] |= (1 << 1) | (1 << 0);
+
+ PL330_DBGCMD_DUMP(SZ_DMAST, "\tDMAST%c\n",
+ cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'));
+
+ return SZ_DMAST;
+}
+
+static inline u32 _emit_STP(unsigned dry_run, u8 buf[],
+ enum pl330_cond cond, u8 peri)
+{
+ if (dry_run)
+ return SZ_DMASTP;
+
+ buf[0] = CMD_DMASTP;
+
+ if (cond == BURST)
+ buf[0] |= (1 << 1);
+
+ peri &= 0x1f;
+ peri <<= 3;
+ buf[1] = peri;
+
+ PL330_DBGCMD_DUMP(SZ_DMASTP, "\tDMASTP%c %u\n",
+ cond == SINGLE ? 'S' : 'B', peri >> 3);
+
+ return SZ_DMASTP;
+}
+
+static inline u32 _emit_STZ(unsigned dry_run, u8 buf[])
+{
+ if (dry_run)
+ return SZ_DMASTZ;
+
+ buf[0] = CMD_DMASTZ;
+
+ PL330_DBGCMD_DUMP(SZ_DMASTZ, "\tDMASTZ\n");
+
+ return SZ_DMASTZ;
+}
+
+static inline u32 _emit_WFE(unsigned dry_run, u8 buf[], u8 ev,
+ unsigned invalidate)
+{
+ if (dry_run)
+ return SZ_DMAWFE;
+
+ buf[0] = CMD_DMAWFE;
+
+ ev &= 0x1f;
+ ev <<= 3;
+ buf[1] = ev;
+
+ if (invalidate)
+ buf[1] |= (1 << 1);
+
+ PL330_DBGCMD_DUMP(SZ_DMAWFE, "\tDMAWFE %u%s\n",
+ ev >> 3, invalidate ? ", I" : "");
+
+ return SZ_DMAWFE;
+}
+
+static inline u32 _emit_WFP(unsigned dry_run, u8 buf[],
+ enum pl330_cond cond, u8 peri)
+{
+ if (dry_run)
+ return SZ_DMAWFP;
+
+ buf[0] = CMD_DMAWFP;
+
+ if (cond == SINGLE)
+ buf[0] |= (0 << 1) | (0 << 0);
+ else if (cond == BURST)
+ buf[0] |= (1 << 1) | (0 << 0);
+ else
+ buf[0] |= (0 << 1) | (1 << 0);
+
+ peri &= 0x1f;
+ peri <<= 3;
+ buf[1] = peri;
+
+ PL330_DBGCMD_DUMP(SZ_DMAWFP, "\tDMAWFP%c %u\n",
+ cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'P'), peri >> 3);
+
+ return SZ_DMAWFP;
+}
+
+static inline u32 _emit_WMB(unsigned dry_run, u8 buf[])
+{
+ if (dry_run)
+ return SZ_DMAWMB;
+
+ buf[0] = CMD_DMAWMB;
+
+ PL330_DBGCMD_DUMP(SZ_DMAWMB, "\tDMAWMB\n");
+
+ return SZ_DMAWMB;
+}
+
+struct _arg_GO {
+ u8 chan;
+ u32 addr;
+ unsigned ns;
+};
+
+static inline u32 _emit_GO(unsigned dry_run, u8 buf[],
+ const struct _arg_GO *arg)
+{
+ u8 chan = arg->chan;
+ u32 addr = arg->addr;
+ unsigned ns = arg->ns;
+
+ if (dry_run)
+ return SZ_DMAGO;
+
+ buf[0] = CMD_DMAGO;
+ buf[0] |= (ns << 1);
+
+ buf[1] = chan & 0x7;
+
+ *((u32 *)&buf[2]) = addr;
+
+ return SZ_DMAGO;
+}
+
+#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
+
+/* Returns Time-Out */
+static bool _until_dmac_idle(struct pl330_thread *thrd)
+{
+ void __iomem *regs = thrd->dmac->pinfo->base;
+ unsigned long loops = msecs_to_loops(5);
+
+ do {
+ /* Until Manager is Idle */
+ if (!(readl(regs + DBGSTATUS) & DBG_BUSY))
+ break;
+
+ cpu_relax();
+ } while (--loops);
+
+ if (!loops)
+ return true;
+
+ return false;
+}
+
+static inline void _execute_DBGINSN(struct pl330_thread *thrd,
+ u8 insn[], bool as_manager)
+{
+ void __iomem *regs = thrd->dmac->pinfo->base;
+ u32 val;
+
+ val = (insn[0] << 16) | (insn[1] << 24);
+ if (!as_manager) {
+ val |= (1 << 0);
+ val |= (thrd->id << 8); /* Channel Number */
+ }
+ writel(val, regs + DBGINST0);
+
+ val = *((u32 *)&insn[2]);
+ writel(val, regs + DBGINST1);
+
+ /* If timed out due to halted state-machine */
+ if (_until_dmac_idle(thrd)) {
+ dev_err(thrd->dmac->pinfo->dev, "DMAC halted!\n");
+ return;
+ }
+
+ /* Get going */
+ writel(0, regs + DBGCMD);
+}
+
+static inline u32 _state(struct pl330_thread *thrd)
+{
+ void __iomem *regs = thrd->dmac->pinfo->base;
+ u32 val;
+
+ if (is_manager(thrd))
+ val = readl(regs + DS) & 0xf;
+ else
+ val = readl(regs + CS(thrd->id)) & 0xf;
+
+ switch (val) {
+ case DS_ST_STOP:
+ return PL330_STATE_STOPPED;
+ case DS_ST_EXEC:
+ return PL330_STATE_EXECUTING;
+ case DS_ST_CMISS:
+ return PL330_STATE_CACHEMISS;
+ case DS_ST_UPDTPC:
+ return PL330_STATE_UPDTPC;
+ case DS_ST_WFE:
+ return PL330_STATE_WFE;
+ case DS_ST_FAULT:
+ return PL330_STATE_FAULTING;
+ case DS_ST_ATBRR:
+ if (is_manager(thrd))
+ return PL330_STATE_INVALID;
+ else
+ return PL330_STATE_ATBARRIER;
+ case DS_ST_QBUSY:
+ if (is_manager(thrd))
+ return PL330_STATE_INVALID;
+ else
+ return PL330_STATE_QUEUEBUSY;
+ case DS_ST_WFP:
+ if (is_manager(thrd))
+ return PL330_STATE_INVALID;
+ else
+ return PL330_STATE_WFP;
+ case DS_ST_KILL:
+ if (is_manager(thrd))
+ return PL330_STATE_INVALID;
+ else
+ return PL330_STATE_KILLING;
+ case DS_ST_CMPLT:
+ if (is_manager(thrd))
+ return PL330_STATE_INVALID;
+ else
+ return PL330_STATE_COMPLETING;
+ case DS_ST_FLTCMP:
+ if (is_manager(thrd))
+ return PL330_STATE_INVALID;
+ else
+ return PL330_STATE_FAULT_COMPLETING;
+ default:
+ return PL330_STATE_INVALID;
+ }
+}
+
+/* If the request 'req' of thread 'thrd' is currently active */
+static inline bool _req_active(struct pl330_thread *thrd,
+ struct _pl330_req *req)
+{
+ void __iomem *regs = thrd->dmac->pinfo->base;
+ u32 buf = req->mc_bus, pc = readl(regs + CPC(thrd->id));
+
+ if (IS_FREE(req))
+ return false;
+
+ return (pc >= buf && pc <= buf + req->mc_len) ? true : false;
+}
+
+/* Returns 0 if the thread is inactive, ID of active req + 1 otherwise */
+static inline unsigned _thrd_active(struct pl330_thread *thrd)
+{
+ if (_req_active(thrd, &thrd->req[0]))
+ return 1; /* First req active */
+
+ if (_req_active(thrd, &thrd->req[1]))
+ return 2; /* Second req active */
+
+ return 0;
+}
+
+static void _stop(struct pl330_thread *thrd)
+{
+ void __iomem *regs = thrd->dmac->pinfo->base;
+ u8 insn[6] = {0, 0, 0, 0, 0, 0};
+
+ if (_state(thrd) == PL330_STATE_FAULT_COMPLETING)
+ UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING);
+
+ /* Return if nothing needs to be done */
+ if (_state(thrd) == PL330_STATE_COMPLETING
+ || _state(thrd) == PL330_STATE_KILLING
+ || _state(thrd) == PL330_STATE_STOPPED)
+ return;
+
+ _emit_KILL(0, insn);
+
+ /* Stop generating interrupts for SEV */
+ writel(readl(regs + INTEN) & ~(1 << thrd->ev), regs + INTEN);
+
+ _execute_DBGINSN(thrd, insn, is_manager(thrd));
+}
+
+/* Start doing req 'idx' of thread 'thrd' */
+static bool _trigger(struct pl330_thread *thrd)
+{
+ void __iomem *regs = thrd->dmac->pinfo->base;
+ struct _pl330_req *req;
+ struct pl330_req *r;
+ struct _arg_GO go;
+ unsigned ns;
+ u8 insn[6] = {0, 0, 0, 0, 0, 0};
+
+ /* Return if already ACTIVE */
+ if (_state(thrd) != PL330_STATE_STOPPED)
+ return true;
+
+ if (!IS_FREE(&thrd->req[1 - thrd->lstenq]))
+ req = &thrd->req[1 - thrd->lstenq];
+ else if (!IS_FREE(&thrd->req[thrd->lstenq]))
+ req = &thrd->req[thrd->lstenq];
+ else
+ req = NULL;
+
+ /* Return if no request */
+ if (!req || !req->r)
+ return true;
+
+ r = req->r;
+
+ if (r->cfg)
+ ns = r->cfg->nonsecure ? 1 : 0;
+ else if (readl(regs + CS(thrd->id)) & CS_CNS)
+ ns = 1;
+ else
+ ns = 0;
+
+ /* See 'Abort Sources' point-4 at Page 2-25 */
+ if (_manager_ns(thrd) && !ns)
+ dev_info(thrd->dmac->pinfo->dev, "%s:%d Recipe for ABORT!\n",
+ __func__, __LINE__);
+
+ go.chan = thrd->id;
+ go.addr = req->mc_bus;
+ go.ns = ns;
+ _emit_GO(0, insn, &go);
+
+ /* Set to generate interrupts for SEV */
+ writel(readl(regs + INTEN) | (1 << thrd->ev), regs + INTEN);
+
+ /* Only manager can execute GO */
+ _execute_DBGINSN(thrd, insn, true);
+
+ return true;
+}
+
+static bool _start(struct pl330_thread *thrd)
+{
+ switch (_state(thrd)) {
+ case PL330_STATE_FAULT_COMPLETING:
+ UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING);
+
+ if (_state(thrd) == PL330_STATE_KILLING)
+ UNTIL(thrd, PL330_STATE_STOPPED)
+
+ case PL330_STATE_FAULTING:
+ _stop(thrd);
+
+ case PL330_STATE_KILLING:
+ case PL330_STATE_COMPLETING:
+ UNTIL(thrd, PL330_STATE_STOPPED)
+
+ case PL330_STATE_STOPPED:
+ return _trigger(thrd);
+
+ case PL330_STATE_WFP:
+ case PL330_STATE_QUEUEBUSY:
+ case PL330_STATE_ATBARRIER:
+ case PL330_STATE_UPDTPC:
+ case PL330_STATE_CACHEMISS:
+ case PL330_STATE_EXECUTING:
+ return true;
+
+ case PL330_STATE_WFE: /* For RESUME, nothing yet */
+ default:
+ return false;
+ }
+}
+
+static inline int _ldst_memtomem(unsigned dry_run, u8 buf[],
+ const struct _xfer_spec *pxs, int cyc)
+{
+ int off = 0;
+
+ while (cyc--) {
+ off += _emit_LD(dry_run, &buf[off], ALWAYS);
+ off += _emit_RMB(dry_run, &buf[off]);
+ off += _emit_ST(dry_run, &buf[off], ALWAYS);
+ off += _emit_WMB(dry_run, &buf[off]);
+ }
+
+ return off;
+}
+
+static inline int _ldst_devtomem(unsigned dry_run, u8 buf[],
+ const struct _xfer_spec *pxs, int cyc)
+{
+ int off = 0;
+
+ while (cyc--) {
+ off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->r->peri);
+ off += _emit_LDP(dry_run, &buf[off], SINGLE, pxs->r->peri);
+ off += _emit_ST(dry_run, &buf[off], ALWAYS);
+ off += _emit_FLUSHP(dry_run, &buf[off], pxs->r->peri);
+ }
+
+ return off;
+}
+
+static inline int _ldst_memtodev(unsigned dry_run, u8 buf[],
+ const struct _xfer_spec *pxs, int cyc)
+{
+ int off = 0;
+
+ while (cyc--) {
+ off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->r->peri);
+ off += _emit_LD(dry_run, &buf[off], ALWAYS);
+ off += _emit_STP(dry_run, &buf[off], SINGLE, pxs->r->peri);
+ off += _emit_FLUSHP(dry_run, &buf[off], pxs->r->peri);
+ }
+
+ return off;
+}
+
+static int _bursts(unsigned dry_run, u8 buf[],
+ const struct _xfer_spec *pxs, int cyc)
+{
+ int off = 0;
+
+ switch (pxs->r->rqtype) {
+ case MEMTODEV:
+ off += _ldst_memtodev(dry_run, &buf[off], pxs, cyc);
+ break;
+ case DEVTOMEM:
+ off += _ldst_devtomem(dry_run, &buf[off], pxs, cyc);
+ break;
+ case MEMTOMEM:
+ off += _ldst_memtomem(dry_run, &buf[off], pxs, cyc);
+ break;
+ default:
+ off += 0x40000000; /* Scare off the Client */
+ break;
+ }
+
+ return off;
+}
+
+/* Returns bytes consumed and updates bursts */
+static inline int _loop(unsigned dry_run, u8 buf[],
+ unsigned long *bursts, const struct _xfer_spec *pxs)
+{
+ int cyc, cycmax, szlp, szlpend, szbrst, off;
+ unsigned lcnt0, lcnt1, ljmp0, ljmp1;
+ struct _arg_LPEND lpend;
+
+ /* Max iterations possibile in DMALP is 256 */
+ if (*bursts >= 256*256) {
+ lcnt1 = 256;
+ lcnt0 = 256;
+ cyc = *bursts / lcnt1 / lcnt0;
+ } else if (*bursts > 256) {
+ lcnt1 = 256;
+ lcnt0 = *bursts / lcnt1;
+ cyc = 1;
+ } else {
+ lcnt1 = *bursts;
+ lcnt0 = 0;
+ cyc = 1;
+ }
+
+ szlp = _emit_LP(1, buf, 0, 0);
+ szbrst = _bursts(1, buf, pxs, 1);
+
+ lpend.cond = ALWAYS;
+ lpend.forever = false;
+ lpend.loop = 0;
+ lpend.bjump = 0;
+ szlpend = _emit_LPEND(1, buf, &lpend);
+
+ if (lcnt0) {
+ szlp *= 2;
+ szlpend *= 2;
+ }
+
+ /*
+ * Max bursts that we can unroll due to limit on the
+ * size of backward jump that can be encoded in DMALPEND
+ * which is 8-bits and hence 255
+ */
+ cycmax = (255 - (szlp + szlpend)) / szbrst;
+
+ cyc = (cycmax < cyc) ? cycmax : cyc;
+
+ off = 0;
+
+ if (lcnt0) {
+ off += _emit_LP(dry_run, &buf[off], 0, lcnt0);
+ ljmp0 = off;
+ }
+
+ off += _emit_LP(dry_run, &buf[off], 1, lcnt1);
+ ljmp1 = off;
+
+ off += _bursts(dry_run, &buf[off], pxs, cyc);
+
+ lpend.cond = ALWAYS;
+ lpend.forever = false;
+ lpend.loop = 1;
+ lpend.bjump = off - ljmp1;
+ off += _emit_LPEND(dry_run, &buf[off], &lpend);
+
+ if (lcnt0) {
+ lpend.cond = ALWAYS;
+ lpend.forever = false;
+ lpend.loop = 0;
+ lpend.bjump = off - ljmp0;
+ off += _emit_LPEND(dry_run, &buf[off], &lpend);
+ }
+
+ *bursts = lcnt1 * cyc;
+ if (lcnt0)
+ *bursts *= lcnt0;
+
+ return off;
+}
+
+static inline int _setup_loops(unsigned dry_run, u8 buf[],
+ const struct _xfer_spec *pxs)
+{
+ struct pl330_xfer *x = pxs->x;
+ u32 ccr = pxs->ccr;
+ unsigned long c, bursts = BYTE_TO_BURST(x->bytes, ccr);
+ int off = 0;
+
+ while (bursts) {
+ c = bursts;
+ off += _loop(dry_run, &buf[off], &c, pxs);
+ bursts -= c;
+ }
+
+ return off;
+}
+
+static inline int _setup_xfer(unsigned dry_run, u8 buf[],
+ const struct _xfer_spec *pxs)
+{
+ struct pl330_xfer *x = pxs->x;
+ int off = 0;
+
+ /* DMAMOV SAR, x->src_addr */
+ off += _emit_MOV(dry_run, &buf[off], SAR, x->src_addr);
+ /* DMAMOV DAR, x->dst_addr */
+ off += _emit_MOV(dry_run, &buf[off], DAR, x->dst_addr);
+
+ /* Setup Loop(s) */
+ off += _setup_loops(dry_run, &buf[off], pxs);
+
+ return off;
+}
+
+/*
+ * A req is a sequence of one or more xfer units.
+ * Returns the number of bytes taken to setup the MC for the req.
+ */
+static int _setup_req(unsigned dry_run, struct pl330_thread *thrd,
+ unsigned index, struct _xfer_spec *pxs)
+{
+ struct _pl330_req *req = &thrd->req[index];
+ struct pl330_xfer *x;
+ u8 *buf = req->mc_cpu;
+ int off = 0;
+
+ PL330_DBGMC_START(req->mc_bus);
+
+ /* DMAMOV CCR, ccr */
+ off += _emit_MOV(dry_run, &buf[off], CCR, pxs->ccr);
+
+ x = pxs->r->x;
+ do {
+ /* Error if xfer length is not aligned at burst size */
+ if (x->bytes % (BRST_SIZE(pxs->ccr) * BRST_LEN(pxs->ccr)))
+ return -EINVAL;
+
+ pxs->x = x;
+ off += _setup_xfer(dry_run, &buf[off], pxs);
+
+ x = x->next;
+ } while (x);
+
+ /* DMASEV peripheral/event */
+ off += _emit_SEV(dry_run, &buf[off], thrd->ev);
+ /* DMAEND */
+ off += _emit_END(dry_run, &buf[off]);
+
+ return off;
+}
+
+static inline u32 _prepare_ccr(const struct pl330_reqcfg *rqc)
+{
+ u32 ccr = 0;
+
+ if (rqc->src_inc)
+ ccr |= CC_SRCINC;
+
+ if (rqc->dst_inc)
+ ccr |= CC_DSTINC;
+
+ /* We set same protection levels for Src and DST for now */
+ if (rqc->privileged)
+ ccr |= CC_SRCPRI | CC_DSTPRI;
+ if (rqc->nonsecure)
+ ccr |= CC_SRCNS | CC_DSTNS;
+ if (rqc->insnaccess)
+ ccr |= CC_SRCIA | CC_DSTIA;
+
+ ccr |= (((rqc->brst_len - 1) & 0xf) << CC_SRCBRSTLEN_SHFT);
+ ccr |= (((rqc->brst_len - 1) & 0xf) << CC_DSTBRSTLEN_SHFT);
+
+ ccr |= (rqc->brst_size << CC_SRCBRSTSIZE_SHFT);
+ ccr |= (rqc->brst_size << CC_DSTBRSTSIZE_SHFT);
+
+ ccr |= (rqc->dcctl << CC_SRCCCTRL_SHFT);
+ ccr |= (rqc->scctl << CC_DSTCCTRL_SHFT);
+
+ ccr |= (rqc->swap << CC_SWAP_SHFT);
+
+ return ccr;
+}
+
+static inline bool _is_valid(u32 ccr)
+{
+ enum pl330_dstcachectrl dcctl;
+ enum pl330_srccachectrl scctl;
+
+ dcctl = (ccr >> CC_DSTCCTRL_SHFT) & CC_DRCCCTRL_MASK;
+ scctl = (ccr >> CC_SRCCCTRL_SHFT) & CC_SRCCCTRL_MASK;
+
+ if (dcctl == DINVALID1 || dcctl == DINVALID2
+ || scctl == SINVALID1 || scctl == SINVALID2)
+ return false;
+ else
+ return true;
+}
+
+/*
+ * Submit a list of xfers after which the client wants notification.
+ * Client is not notified after each xfer unit, just once after all
+ * xfer units are done or some error occurs.
+ */
+int pl330_submit_req(void *ch_id, struct pl330_req *r)
+{
+ struct pl330_thread *thrd = ch_id;
+ struct pl330_dmac *pl330;
+ struct pl330_info *pi;
+ struct _xfer_spec xs;
+ unsigned long flags;
+ void __iomem *regs;
+ unsigned idx;
+ u32 ccr;
+ int ret = 0;
+
+ /* No Req or Unacquired Channel or DMAC */
+ if (!r || !thrd || thrd->free)
+ return -EINVAL;
+
+ pl330 = thrd->dmac;
+ pi = pl330->pinfo;
+ regs = pi->base;
+
+ if (pl330->state == DYING
+ || pl330->dmac_tbd.reset_chan & (1 << thrd->id)) {
+ dev_info(thrd->dmac->pinfo->dev, "%s:%d\n",
+ __func__, __LINE__);
+ return -EAGAIN;
+ }
+
+ /* If request for non-existing peripheral */
+ if (r->rqtype != MEMTOMEM && r->peri >= pi->pcfg.num_peri) {
+ dev_info(thrd->dmac->pinfo->dev,
+ "%s:%d Invalid peripheral(%u)!\n",
+ __func__, __LINE__, r->peri);
+ return -EINVAL;
+ }
+
+ spin_lock_irqsave(&pl330->lock, flags);
+
+ if (_queue_full(thrd)) {
+ ret = -EAGAIN;
+ goto xfer_exit;
+ }
+
+ /* Prefer Secure Channel */
+ if (!_manager_ns(thrd))
+ r->cfg->nonsecure = 0;
+ else
+ r->cfg->nonsecure = 1;
+
+ /* Use last settings, if not provided */
+ if (r->cfg)
+ ccr = _prepare_ccr(r->cfg);
+ else
+ ccr = readl(regs + CC(thrd->id));
+
+ /* If this req doesn't have valid xfer settings */
+ if (!_is_valid(ccr)) {
+ ret = -EINVAL;
+ dev_info(thrd->dmac->pinfo->dev, "%s:%d Invalid CCR(%x)!\n",
+ __func__, __LINE__, ccr);
+ goto xfer_exit;
+ }
+
+ idx = IS_FREE(&thrd->req[0]) ? 0 : 1;
+
+ xs.ccr = ccr;
+ xs.r = r;
+
+ /* First dry run to check if req is acceptable */
+ ret = _setup_req(1, thrd, idx, &xs);
+ if (ret < 0)
+ goto xfer_exit;
+
+ if (ret > pi->mcbufsz / 2) {
+ dev_info(thrd->dmac->pinfo->dev,
+ "%s:%d Trying increasing mcbufsz\n",
+ __func__, __LINE__);
+ ret = -ENOMEM;
+ goto xfer_exit;
+ }
+
+ /* Hook the request */
+ thrd->lstenq = idx;
+ thrd->req[idx].mc_len = _setup_req(0, thrd, idx, &xs);
+ thrd->req[idx].r = r;
+
+ ret = 0;
+
+xfer_exit:
+ spin_unlock_irqrestore(&pl330->lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(pl330_submit_req);
+
+static void pl330_dotask(unsigned long data)
+{
+ struct pl330_dmac *pl330 = (struct pl330_dmac *) data;
+ struct pl330_info *pi = pl330->pinfo;
+ unsigned long flags;
+ int i;
+
+ spin_lock_irqsave(&pl330->lock, flags);
+
+ /* The DMAC itself gone nuts */
+ if (pl330->dmac_tbd.reset_dmac) {
+ pl330->state = DYING;
+ /* Reset the manager too */
+ pl330->dmac_tbd.reset_mngr = true;
+ /* Clear the reset flag */
+ pl330->dmac_tbd.reset_dmac = false;
+ }
+
+ if (pl330->dmac_tbd.reset_mngr) {
+ _stop(pl330->manager);
+ /* Reset all channels */
+ pl330->dmac_tbd.reset_chan = (1 << pi->pcfg.num_chan) - 1;
+ /* Clear the reset flag */
+ pl330->dmac_tbd.reset_mngr = false;
+ }
+
+ for (i = 0; i < pi->pcfg.num_chan; i++) {
+
+ if (pl330->dmac_tbd.reset_chan & (1 << i)) {
+ struct pl330_thread *thrd = &pl330->channels[i];
+ void __iomem *regs = pi->base;
+ enum pl330_op_err err;
+
+ _stop(thrd);
+
+ if (readl(regs + FSC) & (1 << thrd->id))
+ err = PL330_ERR_FAIL;
+ else
+ err = PL330_ERR_ABORT;
+
+ spin_unlock_irqrestore(&pl330->lock, flags);
+
+ _callback(thrd->req[1 - thrd->lstenq].r, err);
+ _callback(thrd->req[thrd->lstenq].r, err);
+
+ spin_lock_irqsave(&pl330->lock, flags);
+
+ thrd->req[0].r = NULL;
+ thrd->req[1].r = NULL;
+ MARK_FREE(&thrd->req[0]);
+ MARK_FREE(&thrd->req[1]);
+
+ /* Clear the reset flag */
+ pl330->dmac_tbd.reset_chan &= ~(1 << i);
+ }
+ }
+
+ spin_unlock_irqrestore(&pl330->lock, flags);
+
+ return;
+}
+
+/* Returns 1 if state was updated, 0 otherwise */
+int pl330_update(const struct pl330_info *pi)
+{
+ struct _pl330_req *rqdone;
+ struct pl330_dmac *pl330;
+ unsigned long flags;
+ void __iomem *regs;
+ u32 val;
+ int id, ev, ret = 0;
+
+ if (!pi || !pi->pl330_data)
+ return 0;
+
+ regs = pi->base;
+ pl330 = pi->pl330_data;
+
+ spin_lock_irqsave(&pl330->lock, flags);
+
+ val = readl(regs + FSM) & 0x1;
+ if (val)
+ pl330->dmac_tbd.reset_mngr = true;
+ else
+ pl330->dmac_tbd.reset_mngr = false;
+
+ val = readl(regs + FSC) & ((1 << pi->pcfg.num_chan) - 1);
+ pl330->dmac_tbd.reset_chan |= val;
+ if (val) {
+ int i = 0;
+ while (i < pi->pcfg.num_chan) {
+ if (val & (1 << i)) {
+ dev_info(pi->dev,
+ "Reset Channel-%d\t CS-%x FTC-%x\n",
+ i, readl(regs + CS(i)),
+ readl(regs + FTC(i)));
+ _stop(&pl330->channels[i]);
+ }
+ i++;
+ }
+ }
+
+ /* Check which event happened i.e, thread notified */
+ val = readl(regs + ES);
+ if (pi->pcfg.num_events < 32
+ && val & ~((1 << pi->pcfg.num_events) - 1)) {
+ pl330->dmac_tbd.reset_dmac = true;
+ dev_err(pi->dev, "%s:%d Unexpected!\n", __func__, __LINE__);
+ ret = 1;
+ goto updt_exit;
+ }
+
+ for (ev = 0; ev < pi->pcfg.num_events; ev++) {
+ if (val & (1 << ev)) { /* Event occured */
+ struct pl330_thread *thrd;
+ u32 inten = readl(regs + INTEN);
+ int active;
+
+ /* Clear the event */
+ if (inten & (1 << ev))
+ writel(1 << ev, regs + INTCLR);
+
+ ret = 1;
+
+ id = pl330->events[ev];
+
+ thrd = &pl330->channels[id];
+
+ active = _thrd_active(thrd);
+ if (!active) /* Aborted */
+ continue;
+
+ active -= 1;
+
+ rqdone = &thrd->req[active];
+ MARK_FREE(rqdone);
+
+ /* Get going again ASAP */
+ _start(thrd);
+
+ /* For now, just make a list of callbacks to be done */
+ list_add_tail(&rqdone->rqd, &pl330->req_done);
+ }
+ }
+
+ /* Now that we are in no hurry, do the callbacks */
+ while (!list_empty(&pl330->req_done)) {
+ rqdone = container_of(pl330->req_done.next,
+ struct _pl330_req, rqd);
+
+ list_del_init(&rqdone->rqd);
+
+ spin_unlock_irqrestore(&pl330->lock, flags);
+ _callback(rqdone->r, PL330_ERR_NONE);
+ spin_lock_irqsave(&pl330->lock, flags);
+ }
+
+updt_exit:
+ spin_unlock_irqrestore(&pl330->lock, flags);
+
+ if (pl330->dmac_tbd.reset_dmac
+ || pl330->dmac_tbd.reset_mngr
+ || pl330->dmac_tbd.reset_chan) {
+ ret = 1;
+ tasklet_schedule(&pl330->tasks);
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL(pl330_update);
+
+int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op)
+{
+ struct pl330_thread *thrd = ch_id;
+ struct pl330_dmac *pl330;
+ unsigned long flags;
+ int ret = 0, active;
+
+ if (!thrd || thrd->free || thrd->dmac->state == DYING)
+ return -EINVAL;
+
+ pl330 = thrd->dmac;
+
+ spin_lock_irqsave(&pl330->lock, flags);
+
+ switch (op) {
+ case PL330_OP_FLUSH:
+ /* Make sure the channel is stopped */
+ _stop(thrd);
+
+ thrd->req[0].r = NULL;
+ thrd->req[1].r = NULL;
+ MARK_FREE(&thrd->req[0]);
+ MARK_FREE(&thrd->req[1]);
+ break;
+
+ case PL330_OP_ABORT:
+ active = _thrd_active(thrd);
+
+ /* Make sure the channel is stopped */
+ _stop(thrd);
+
+ /* ABORT is only for the active req */
+ if (!active)
+ break;
+
+ active--;
+
+ thrd->req[active].r = NULL;
+ MARK_FREE(&thrd->req[active]);
+
+ /* Start the next */
+ case PL330_OP_START:
+ if (!_start(thrd))
+ ret = -EIO;
+ break;
+
+ default:
+ ret = -EINVAL;
+ }
+
+ spin_unlock_irqrestore(&pl330->lock, flags);
+ return ret;
+}
+EXPORT_SYMBOL(pl330_chan_ctrl);
+
+int pl330_chan_status(void *ch_id, struct pl330_chanstatus *pstatus)
+{
+ struct pl330_thread *thrd = ch_id;
+ struct pl330_dmac *pl330;
+ struct pl330_info *pi;
+ void __iomem *regs;
+ int active;
+ u32 val;
+
+ if (!pstatus || !thrd || thrd->free)
+ return -EINVAL;
+
+ pl330 = thrd->dmac;
+ pi = pl330->pinfo;
+ regs = pi->base;
+
+ /* The client should remove the DMAC and add again */
+ if (pl330->state == DYING)
+ pstatus->dmac_halted = true;
+ else
+ pstatus->dmac_halted = false;
+
+ val = readl(regs + FSC);
+ if (val & (1 << thrd->id))
+ pstatus->faulting = true;
+ else
+ pstatus->faulting = false;
+
+ active = _thrd_active(thrd);
+
+ if (!active) {
+ /* Indicate that the thread is not running */
+ pstatus->top_req = NULL;
+ pstatus->wait_req = NULL;
+ } else {
+ active--;
+ pstatus->top_req = thrd->req[active].r;
+ pstatus->wait_req = !IS_FREE(&thrd->req[1 - active])
+ ? thrd->req[1 - active].r : NULL;
+ }
+
+ pstatus->src_addr = readl(regs + SA(thrd->id));
+ pstatus->dst_addr = readl(regs + DA(thrd->id));
+
+ return 0;
+}
+EXPORT_SYMBOL(pl330_chan_status);
+
+/* Reserve an event */
+static inline int _alloc_event(struct pl330_thread *thrd)
+{
+ struct pl330_dmac *pl330 = thrd->dmac;
+ struct pl330_info *pi = pl330->pinfo;
+ int ev;
+
+ for (ev = 0; ev < pi->pcfg.num_events; ev++)
+ if (pl330->events[ev] == -1) {
+ pl330->events[ev] = thrd->id;
+ return ev;
+ }
+
+ return -1;
+}
+
+/* Upon success, returns IdentityToken for the
+ * allocated channel, NULL otherwise.
+ */
+void *pl330_request_channel(const struct pl330_info *pi)
+{
+ struct pl330_thread *thrd = NULL;
+ struct pl330_dmac *pl330;
+ unsigned long flags;
+ int chans, i;
+
+ if (!pi || !pi->pl330_data)
+ return NULL;
+
+ pl330 = pi->pl330_data;
+
+ if (pl330->state == DYING)
+ return NULL;
+
+ chans = pi->pcfg.num_chan;
+
+ spin_lock_irqsave(&pl330->lock, flags);
+
+ for (i = 0; i < chans; i++) {
+ thrd = &pl330->channels[i];
+ if (thrd->free) {
+ thrd->ev = _alloc_event(thrd);
+ if (thrd->ev >= 0) {
+ thrd->free = false;
+ thrd->lstenq = 1;
+ thrd->req[0].r = NULL;
+ MARK_FREE(&thrd->req[0]);
+ thrd->req[1].r = NULL;
+ MARK_FREE(&thrd->req[1]);
+ break;
+ }
+ }
+ thrd = NULL;
+ }
+
+ spin_unlock_irqrestore(&pl330->lock, flags);
+
+ return thrd;
+}
+EXPORT_SYMBOL(pl330_request_channel);
+
+/* Release an event */
+static inline void _free_event(struct pl330_thread *thrd, int ev)
+{
+ struct pl330_dmac *pl330 = thrd->dmac;
+ struct pl330_info *pi = pl330->pinfo;
+
+ /* If the event is valid and was held by the thread */
+ if (ev >= 0 && ev < pi->pcfg.num_events
+ && pl330->events[ev] == thrd->id)
+ pl330->events[ev] = -1;
+}
+
+void pl330_release_channel(void *ch_id)
+{
+ struct pl330_thread *thrd = ch_id;
+ struct pl330_dmac *pl330;
+ unsigned long flags;
+
+ if (!thrd || thrd->free)
+ return;
+
+ _stop(thrd);
+
+ _callback(thrd->req[1 - thrd->lstenq].r, PL330_ERR_ABORT);
+ _callback(thrd->req[thrd->lstenq].r, PL330_ERR_ABORT);
+
+ pl330 = thrd->dmac;
+
+ spin_lock_irqsave(&pl330->lock, flags);
+ _free_event(thrd, thrd->ev);
+ thrd->free = true;
+ spin_unlock_irqrestore(&pl330->lock, flags);
+}
+EXPORT_SYMBOL(pl330_release_channel);
+
+/* Initialize the structure for PL330 configuration, that can be used
+ * by the client driver the make best use of the DMAC
+ */
+static void read_dmac_config(struct pl330_info *pi)
+{
+ void __iomem *regs = pi->base;
+ u32 val;
+
+ val = readl(regs + CRD) >> CRD_DATA_WIDTH_SHIFT;
+ val &= CRD_DATA_WIDTH_MASK;
+ pi->pcfg.data_bus_width = 8 * (1 << val);
+
+ val = readl(regs + CRD) >> CRD_DATA_BUFF_SHIFT;
+ val &= CRD_DATA_BUFF_MASK;
+ pi->pcfg.data_buf_dep = val + 1;
+
+ val = readl(regs + CR0) >> CR0_NUM_CHANS_SHIFT;
+ val &= CR0_NUM_CHANS_MASK;
+ val += 1;
+ pi->pcfg.num_chan = val;
+
+ val = readl(regs + CR0);
+ if (val & CR0_PERIPH_REQ_SET) {
+ val = (val >> CR0_NUM_PERIPH_SHIFT) & CR0_NUM_PERIPH_MASK;
+ val += 1;
+ pi->pcfg.num_peri = val;
+ pi->pcfg.peri_ns = readl(regs + CR4);
+ } else {
+ pi->pcfg.num_peri = 0;
+ }
+
+ val = readl(regs + CR0);
+ if (val & CR0_BOOT_MAN_NS)
+ pi->pcfg.mode |= DMAC_MODE_NS;
+ else
+ pi->pcfg.mode &= ~DMAC_MODE_NS;
+
+ val = readl(regs + CR0) >> CR0_NUM_EVENTS_SHIFT;
+ val &= CR0_NUM_EVENTS_MASK;
+ val += 1;
+ pi->pcfg.num_events = val;
+
+ pi->pcfg.irq_ns = readl(regs + CR3);
+
+ pi->pcfg.periph_id = get_id(pi, PERIPH_ID);
+ pi->pcfg.pcell_id = get_id(pi, PCELL_ID);
+}
+
+static inline void _reset_thread(struct pl330_thread *thrd)
+{
+ struct pl330_dmac *pl330 = thrd->dmac;
+ struct pl330_info *pi = pl330->pinfo;
+
+ thrd->req[0].mc_cpu = pl330->mcode_cpu
+ + (thrd->id * pi->mcbufsz);
+ thrd->req[0].mc_bus = pl330->mcode_bus
+ + (thrd->id * pi->mcbufsz);
+ thrd->req[0].r = NULL;
+ MARK_FREE(&thrd->req[0]);
+
+ thrd->req[1].mc_cpu = thrd->req[0].mc_cpu
+ + pi->mcbufsz / 2;
+ thrd->req[1].mc_bus = thrd->req[0].mc_bus
+ + pi->mcbufsz / 2;
+ thrd->req[1].r = NULL;
+ MARK_FREE(&thrd->req[1]);
+}
+
+static int dmac_alloc_threads(struct pl330_dmac *pl330)
+{
+ struct pl330_info *pi = pl330->pinfo;
+ int chans = pi->pcfg.num_chan;
+ struct pl330_thread *thrd;
+ int i;
+
+ /* Allocate 1 Manager and 'chans' Channel threads */
+ pl330->channels = kzalloc((1 + chans) * sizeof(*thrd),
+ GFP_KERNEL);
+ if (!pl330->channels)
+ return -ENOMEM;
+
+ /* Init Channel threads */
+ for (i = 0; i < chans; i++) {
+ thrd = &pl330->channels[i];
+ thrd->id = i;
+ thrd->dmac = pl330;
+ _reset_thread(thrd);
+ thrd->free = true;
+ }
+
+ /* MANAGER is indexed at the end */
+ thrd = &pl330->channels[chans];
+ thrd->id = chans;
+ thrd->dmac = pl330;
+ thrd->free = false;
+ pl330->manager = thrd;
+
+ return 0;
+}
+
+static int dmac_alloc_resources(struct pl330_dmac *pl330)
+{
+ struct pl330_info *pi = pl330->pinfo;
+ int chans = pi->pcfg.num_chan;
+ int ret;
+
+ /*
+ * Alloc MicroCode buffer for 'chans' Channel threads.
+ * A channel's buffer offset is (Channel_Id * MCODE_BUFF_PERCHAN)
+ */
+ pl330->mcode_cpu = dma_alloc_coherent(pi->dev,
+ chans * pi->mcbufsz,
+ &pl330->mcode_bus, GFP_KERNEL);
+ if (!pl330->mcode_cpu) {
+ dev_err(pi->dev, "%s:%d Can't allocate memory!\n",
+ __func__, __LINE__);
+ return -ENOMEM;
+ }
+
+ ret = dmac_alloc_threads(pl330);
+ if (ret) {
+ dev_err(pi->dev, "%s:%d Can't to create channels for DMAC!\n",
+ __func__, __LINE__);
+ dma_free_coherent(pi->dev,
+ chans * pi->mcbufsz,
+ pl330->mcode_cpu, pl330->mcode_bus);
+ return ret;
+ }
+
+ return 0;
+}
+
+int pl330_add(struct pl330_info *pi)
+{
+ struct pl330_dmac *pl330;
+ void __iomem *regs;
+ int i, ret;
+
+ if (!pi || !pi->dev)
+ return -EINVAL;
+
+ /* If already added */
+ if (pi->pl330_data)
+ return -EINVAL;
+
+ /*
+ * If the SoC can perform reset on the DMAC, then do it
+ * before reading its configuration.
+ */
+ if (pi->dmac_reset)
+ pi->dmac_reset(pi);
+
+ regs = pi->base;
+
+ /* Check if we can handle this DMAC */
+ if (get_id(pi, PERIPH_ID) != PERIPH_ID_VAL
+ || get_id(pi, PCELL_ID) != PCELL_ID_VAL) {
+ dev_err(pi->dev, "PERIPH_ID 0x%x, PCELL_ID 0x%x !\n",
+ readl(regs + PERIPH_ID), readl(regs + PCELL_ID));
+ return -EINVAL;
+ }
+
+ /* Read the configuration of the DMAC */
+ read_dmac_config(pi);
+
+ if (pi->pcfg.num_events == 0) {
+ dev_err(pi->dev, "%s:%d Can't work without events!\n",
+ __func__, __LINE__);
+ return -EINVAL;
+ }
+
+ pl330 = kzalloc(sizeof(*pl330), GFP_KERNEL);
+ if (!pl330) {
+ dev_err(pi->dev, "%s:%d Can't allocate memory!\n",
+ __func__, __LINE__);
+ return -ENOMEM;
+ }
+
+ /* Assign the info structure and private data */
+ pl330->pinfo = pi;
+ pi->pl330_data = pl330;
+
+ spin_lock_init(&pl330->lock);
+
+ INIT_LIST_HEAD(&pl330->req_done);
+
+ /* Use default MC buffer size if not provided */
+ if (!pi->mcbufsz)
+ pi->mcbufsz = MCODE_BUFF_PER_REQ * 2;
+
+ /* Mark all events as free */
+ for (i = 0; i < pi->pcfg.num_events; i++)
+ pl330->events[i] = -1;
+
+ /* Allocate resources needed by the DMAC */
+ ret = dmac_alloc_resources(pl330);
+ if (ret) {
+ dev_err(pi->dev, "Unable to create channels for DMAC\n");
+ kfree(pl330);
+ return ret;
+ }
+
+ tasklet_init(&pl330->tasks, pl330_dotask, (unsigned long) pl330);
+
+ pl330->state = INIT;
+
+ return 0;
+}
+EXPORT_SYMBOL(pl330_add);
+
+static int dmac_free_threads(struct pl330_dmac *pl330)
+{
+ struct pl330_info *pi = pl330->pinfo;
+ int chans = pi->pcfg.num_chan;
+ struct pl330_thread *thrd;
+ int i;
+
+ /* Release Channel threads */
+ for (i = 0; i < chans; i++) {
+ thrd = &pl330->channels[i];
+ pl330_release_channel((void *)thrd);
+ }
+
+ /* Free memory */
+ kfree(pl330->channels);
+
+ return 0;
+}
+
+static void dmac_free_resources(struct pl330_dmac *pl330)
+{
+ struct pl330_info *pi = pl330->pinfo;
+ int chans = pi->pcfg.num_chan;
+
+ dmac_free_threads(pl330);
+
+ dma_free_coherent(pi->dev, chans * pi->mcbufsz,
+ pl330->mcode_cpu, pl330->mcode_bus);
+}
+
+void pl330_del(struct pl330_info *pi)
+{
+ struct pl330_dmac *pl330;
+
+ if (!pi || !pi->pl330_data)
+ return;
+
+ pl330 = pi->pl330_data;
+
+ pl330->state = UNINIT;
+
+ tasklet_kill(&pl330->tasks);
+
+ /* Free DMAC resources */
+ dmac_free_resources(pl330);
+
+ kfree(pl330);
+ pi->pl330_data = NULL;
+}
+EXPORT_SYMBOL(pl330_del);
#endif /* CONFIG_PM */
static struct irq_chip vic_chip = {
- .name = "VIC",
- .ack = vic_ack_irq,
- .mask = vic_mask_irq,
- .unmask = vic_unmask_irq,
- .set_wake = vic_set_wake,
+ .name = "VIC",
+ .ack = vic_ack_irq,
+ .mask = vic_mask_irq,
+ .unmask = vic_unmask_irq,
+ .set_wake = vic_set_wake,
};
+static void __init vic_disable(void __iomem *base)
+{
+ writel(0, base + VIC_INT_SELECT);
+ writel(0, base + VIC_INT_ENABLE);
+ writel(~0, base + VIC_INT_ENABLE_CLEAR);
+ writel(0, base + VIC_IRQ_STATUS);
+ writel(0, base + VIC_ITCR);
+ writel(~0, base + VIC_INT_SOFT_CLEAR);
+}
+
+static void __init vic_clear_interrupts(void __iomem *base)
+{
+ unsigned int i;
+
+ writel(0, base + VIC_PL190_VECT_ADDR);
+ for (i = 0; i < 19; i++) {
+ unsigned int value;
+
+ value = readl(base + VIC_PL190_VECT_ADDR);
+ writel(value, base + VIC_PL190_VECT_ADDR);
+ }
+}
+
+static void __init vic_set_irq_sources(void __iomem *base,
+ unsigned int irq_start, u32 vic_sources)
+{
+ unsigned int i;
+
+ for (i = 0; i < 32; i++) {
+ if (vic_sources & (1 << i)) {
+ unsigned int irq = irq_start + i;
+
+ set_irq_chip(irq, &vic_chip);
+ set_irq_chip_data(irq, base);
+ set_irq_handler(irq, handle_level_irq);
+ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+ }
+ }
+}
+
/*
* The PL190 cell from ARM has been modified by ST to handle 64 interrupts.
* The original cell has 32 interrupts, while the modified one has 64,
int vic_2nd_block = ((unsigned long)base & ~PAGE_MASK) != 0;
/* Disable all interrupts initially. */
-
- writel(0, base + VIC_INT_SELECT);
- writel(0, base + VIC_INT_ENABLE);
- writel(~0, base + VIC_INT_ENABLE_CLEAR);
- writel(0, base + VIC_IRQ_STATUS);
- writel(0, base + VIC_ITCR);
- writel(~0, base + VIC_INT_SOFT_CLEAR);
+ vic_disable(base);
/*
* Make sure we clear all existing interrupts. The vector registers
* the second base address, which is 0x20 in the page
*/
if (vic_2nd_block) {
- writel(0, base + VIC_PL190_VECT_ADDR);
- for (i = 0; i < 19; i++) {
- unsigned int value;
+ vic_clear_interrupts(base);
- value = readl(base + VIC_PL190_VECT_ADDR);
- writel(value, base + VIC_PL190_VECT_ADDR);
- }
/* ST has 16 vectors as well, but we don't enable them by now */
for (i = 0; i < 16; i++) {
void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
writel(32, base + VIC_PL190_DEF_VECT_ADDR);
}
- for (i = 0; i < 32; i++) {
- if (vic_sources & (1 << i)) {
- unsigned int irq = irq_start + i;
-
- set_irq_chip(irq, &vic_chip);
- set_irq_chip_data(irq, base);
- set_irq_handler(irq, handle_level_irq);
- set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
- }
- }
+ vic_set_irq_sources(base, irq_start, vic_sources);
}
/**
}
/* Disable all interrupts initially. */
+ vic_disable(base);
- writel(0, base + VIC_INT_SELECT);
- writel(0, base + VIC_INT_ENABLE);
- writel(~0, base + VIC_INT_ENABLE_CLEAR);
- writel(0, base + VIC_IRQ_STATUS);
- writel(0, base + VIC_ITCR);
- writel(~0, base + VIC_INT_SOFT_CLEAR);
-
- /*
- * Make sure we clear all existing interrupts
- */
- writel(0, base + VIC_PL190_VECT_ADDR);
- for (i = 0; i < 19; i++) {
- unsigned int value;
-
- value = readl(base + VIC_PL190_VECT_ADDR);
- writel(value, base + VIC_PL190_VECT_ADDR);
- }
+ /* Make sure we clear all existing interrupts */
+ vic_clear_interrupts(base);
vic_init2(base);
- for (i = 0; i < 32; i++) {
- if (vic_sources & (1 << i)) {
- unsigned int irq = irq_start + i;
-
- set_irq_chip(irq, &vic_chip);
- set_irq_chip_data(irq, base);
- set_irq_handler(irq, handle_level_irq);
- set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
- }
- }
+ vic_set_irq_sources(base, irq_start, vic_sources);
vic_pm_register(base, irq_start, resume_sources);
}
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.34-rc6
+# Sun May 2 21:58:08 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_OPROFILE_ARMV6=y
+CONFIG_OPROFILE_ARM11_CORE=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+# CONFIG_CGROUP_NS is not set
+# CONFIG_CGROUP_FREEZER is not set
+# CONFIG_CGROUP_DEVICE is not set
+# CONFIG_CPUSETS is not set
+# CONFIG_CGROUP_CPUACCT is not set
+# CONFIG_RESOURCE_COUNTERS is not set
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_LZO=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_SLOW_WORK=y
+# CONFIG_SLOW_WORK_DEBUG is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=m
+# CONFIG_CFQ_GROUP_IOSCHED is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_CLPS711X is not set
+CONFIG_ARCH_CNS3XXX=y
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_NUC93X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_SHMOBILE is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P6440 is not set
+# CONFIG_ARCH_S5P6442 is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_S5PV210 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# CNS3XXX platform type
+#
+CONFIG_MACH_CNS3420VB=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_V6=y
+# CONFIG_CPU_32v6K is not set
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_V6=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_CPU_HAS_PMU=y
+# CONFIG_ARM_ERRATA_411920 is not set
+CONFIG_ARM_GIC=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyS0,38400 mem=128M root=/dev/mmcblk0p1 ro rootwait"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=20000
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
+# CONFIG_SATA_PMP is not set
+# CONFIG_ATA_SFF is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+# CONFIG_EXT2_FS_POSIX_ACL is not set
+# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+CONFIG_FSCACHE=y
+# CONFIG_FSCACHE_STATS is not set
+# CONFIG_FSCACHE_HISTOGRAM is not set
+# CONFIG_FSCACHE_DEBUG is not set
+# CONFIG_FSCACHE_OBJECT_LIST is not set
+# CONFIG_CACHEFILES is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LKDTM is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_ARM_UNWIND is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_OC_ETM is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Tue Jan 5 13:55:22 2010
+# Linux kernel version: 2.6.34-rc5
+# Wed Apr 28 11:23:19 2010
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_HAVE_PROC_CPU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
#
# GCOV-based kernel profiling
#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_BCMRING is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_STMP3XXX is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_NUC93X is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_SHMOBILE is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P6440 is not set
+# CONFIG_ARCH_S5P6442 is not set
# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_S5PV210 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
# CONFIG_MACH_TAVOREVB is not set
#
#
# CONFIG_MACH_ASPENITE is not set
# CONFIG_MACH_ZYLONITE2 is not set
+# CONFIG_MACH_AVENGERS_LITE is not set
# CONFIG_MACH_TTC_DKB is not set
CONFIG_MACH_FLINT=y
+CONFIG_MACH_MARVELL_JASPER=y
CONFIG_CPU_MMP2=y
CONFIG_PLAT_PXA=y
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_OUTER_CACHE=y
+CONFIG_CACHE_TAUROS2=y
CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_CPU_HAS_PMU=y
# CONFIG_ARM_ERRATA_411920 is not set
CONFIG_COMMON_CLKDEV=y
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=128M user_debug=255"
+CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS2,38400 mem=128M user_debug=255"
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
CONFIG_SERIAL_PXA_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_I2C_PXA=y
# CONFIG_I2C_PXA_SLAVE is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
#
# Memory mapped GPIO expanders:
#
+# CONFIG_GPIO_IT8761E is not set
#
# I2C GPIO expanders:
#
+# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_TC6393XB is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+CONFIG_MFD_MAX8925=y
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
-CONFIG_MFD_88PM8607=y
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_DUMMY is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_REGULATOR_MAX1586 is not set
-CONFIG_REGULATOR_MAX8660=y
+CONFIG_REGULATOR_MAX8649=y
+# CONFIG_REGULATOR_MAX8660 is not set
+CONFIG_REGULATOR_MAX8925=y
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_REGULATOR_TPS65023 is not set
# CONFIG_REGULATOR_TPS6507X is not set
-CONFIG_REGULATOR_88PM8607=y
# CONFIG_MEDIA_SUPPORT is not set
#
# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
+CONFIG_BACKLIGHT_MAX8925=y
#
# Display device support
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
+CONFIG_RTC_DRV_MAX8925=y
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
-CONFIG_EXT4_USE_FOR_EXT23=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
+# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_DYNAMIC_DEBUG=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
# CONFIG_DEBUG_STACK_USAGE is not set
-CONFIG_DEBUG_LL=y
-# CONFIG_EARLY_PRINTK is not set
-# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_DEBUG_LL is not set
# CONFIG_OC_ETM is not set
#
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32
+# Tue Mar 23 14:36:23 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+CONFIG_PLAT_SPEAR=y
+CONFIG_ARCH_SPEAR3XX=y
+# CONFIG_ARCH_SPEAR6XX is not set
+CONFIG_MACH_SPEAR300=y
+# CONFIG_MACH_SPEAR310 is not set
+# CONFIG_MACH_SPEAR320 is not set
+CONFIG_BOARD_SPEAR300_EVB=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_ARM_VIC=y
+CONFIG_ARM_VIC_NR=2
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+CONFIG_ARM_AMBA=y
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=y
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_AMBAKMI is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_AMBA_PL010 is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+CONFIG_RAW_DRIVER=y
+CONFIG_MAX_RAW_DEVS=8192
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+CONFIG_GPIO_PL061=y
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+# CONFIG_EXT2_FS_POSIX_ACL is not set
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=m
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=m
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_RCU_CPU_STALL_DETECTOR=y
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32
+# Tue Mar 23 14:37:01 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+CONFIG_PLAT_SPEAR=y
+CONFIG_ARCH_SPEAR3XX=y
+# CONFIG_ARCH_SPEAR6XX is not set
+# CONFIG_MACH_SPEAR300 is not set
+CONFIG_MACH_SPEAR310=y
+# CONFIG_MACH_SPEAR320 is not set
+# CONFIG_BOARD_SPEAR300_EVB is not set
+CONFIG_BOARD_SPEAR310_EVB=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_ARM_VIC=y
+CONFIG_ARM_VIC_NR=2
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+CONFIG_ARM_AMBA=y
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=y
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_AMBAKMI is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_AMBA_PL010 is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+CONFIG_RAW_DRIVER=y
+CONFIG_MAX_RAW_DEVS=8192
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+CONFIG_GPIO_PL061=y
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+# CONFIG_EXT2_FS_POSIX_ACL is not set
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=m
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=m
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_RCU_CPU_STALL_DETECTOR=y
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32
+# Tue Mar 23 14:37:12 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+CONFIG_PLAT_SPEAR=y
+CONFIG_ARCH_SPEAR3XX=y
+# CONFIG_ARCH_SPEAR6XX is not set
+# CONFIG_MACH_SPEAR300 is not set
+# CONFIG_MACH_SPEAR310 is not set
+CONFIG_MACH_SPEAR320=y
+# CONFIG_BOARD_SPEAR300_EVB is not set
+CONFIG_BOARD_SPEAR320_EVB=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_ARM_VIC=y
+CONFIG_ARM_VIC_NR=2
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+CONFIG_ARM_AMBA=y
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=y
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_AMBAKMI is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_AMBA_PL010 is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+CONFIG_RAW_DRIVER=y
+CONFIG_MAX_RAW_DEVS=8192
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+CONFIG_GPIO_PL061=y
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+# CONFIG_EXT2_FS_POSIX_ACL is not set
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=m
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=m
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_RCU_CPU_STALL_DETECTOR=y
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32
+# Tue Mar 23 14:37:26 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+CONFIG_PLAT_SPEAR=y
+# CONFIG_ARCH_SPEAR3XX is not set
+CONFIG_ARCH_SPEAR6XX=y
+# CONFIG_MACH_SPEAR300 is not set
+# CONFIG_MACH_SPEAR310 is not set
+# CONFIG_MACH_SPEAR320 is not set
+# CONFIG_BOARD_SPEAR300_EVB is not set
+CONFIG_MACH_SPEAR600=y
+CONFIG_BOARD_SPEAR600_EVB=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_ARM_VIC=y
+CONFIG_ARM_VIC_NR=2
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+CONFIG_ARM_AMBA=y
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
git.openpandora.org / pandora-kernel.git / commitdiff