usb: dwc3: clean up whitespace damage, typos, missing parens, etc.
authorPaul Zimmerman <Paul.Zimmerman@synopsys.com>
Thu, 16 Feb 2012 02:56:56 +0000 (18:56 -0800)
committerFelipe Balbi <balbi@ti.com>
Fri, 2 Mar 2012 10:12:01 +0000 (12:12 +0200)
trivial patch, no functional changes

Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
drivers/usb/dwc3/core.c
drivers/usb/dwc3/core.h
drivers/usb/dwc3/dwc3-pci.c
drivers/usb/dwc3/ep0.c
drivers/usb/dwc3/gadget.c

index a1576f0..33d9868 100644 (file)
@@ -167,11 +167,11 @@ static void dwc3_free_one_event_buffer(struct dwc3 *dwc,
 }
 
 /**
- * dwc3_alloc_one_event_buffer - Allocated one event buffer structure
+ * dwc3_alloc_one_event_buffer - Allocates one event buffer structure
  * @dwc: Pointer to our controller context structure
  * @length: size of the event buffer
  *
- * Returns a pointer to the allocated event buffer structure on succes
+ * Returns a pointer to the allocated event buffer structure on success
  * otherwise ERR_PTR(errno).
  */
 static struct dwc3_event_buffer *__devinit
@@ -215,10 +215,10 @@ static void dwc3_free_event_buffers(struct dwc3 *dwc)
 
 /**
  * dwc3_alloc_event_buffers - Allocates @num event buffers of size @length
- * @dwc: Pointer to out controller context structure
+ * @dwc: pointer to our controller context structure
  * @length: size of event buffer
  *
- * Returns 0 on success otherwise negative errno. In error the case, dwc
+ * Returns 0 on success otherwise negative errno. In the error case, dwc
  * may contain some buffers allocated but not all which were requested.
  */
 static int __devinit dwc3_alloc_event_buffers(struct dwc3 *dwc, unsigned length)
@@ -251,7 +251,7 @@ static int __devinit dwc3_alloc_event_buffers(struct dwc3 *dwc, unsigned length)
 
 /**
  * dwc3_event_buffers_setup - setup our allocated event buffers
- * @dwc: Pointer to out controller context structure
+ * @dwc: pointer to our controller context structure
  *
  * Returns 0 on success otherwise negative errno.
  */
@@ -363,9 +363,9 @@ static int __devinit dwc3_core_init(struct dwc3 *dwc)
 
        /*
         * WORKAROUND: DWC3 revisions <1.90a have a bug
-        * when The device fails to connect at SuperSpeed
+        * where the device can fail to connect at SuperSpeed
         * and falls back to high-speed mode which causes
-        * the device to enter in a Connect/Disconnect loop
+        * the device to enter a Connect/Disconnect loop
         */
        if (dwc->revision < DWC3_REVISION_190A)
                reg |= DWC3_GCTL_U2RSTECN;
index 696b20a..81d1c0a 100644 (file)
 /* Bit fields */
 
 /* Global Configuration Register */
-#define DWC3_GCTL_PWRDNSCALE(n)        (n << 19)
+#define DWC3_GCTL_PWRDNSCALE(n)        ((n) << 19)
 #define DWC3_GCTL_U2RSTECN     (1 << 16)
-#define DWC3_GCTL_RAMCLKSEL(x) ((x & DWC3_GCTL_CLK_MASK) << 6)
+#define DWC3_GCTL_RAMCLKSEL(x) (((x) & DWC3_GCTL_CLK_MASK) << 6)
 #define DWC3_GCTL_CLK_BUS      (0)
 #define DWC3_GCTL_CLK_PIPE     (1)
 #define DWC3_GCTL_CLK_PIPEHALF (2)
 #define DWC3_GCTL_CLK_MASK     (3)
 
 #define DWC3_GCTL_PRTCAP(n)    (((n) & (3 << 12)) >> 12)
-#define DWC3_GCTL_PRTCAPDIR(n) (n << 12)
+#define DWC3_GCTL_PRTCAPDIR(n) ((n) << 12)
 #define DWC3_GCTL_PRTCAP_HOST  1
 #define DWC3_GCTL_PRTCAP_DEVICE        2
 #define DWC3_GCTL_PRTCAP_OTG   3
 
 #define DWC3_GCTL_CORESOFTRESET        (1 << 11)
-#define DWC3_GCTL_SCALEDOWN(n) (n << 4)
+#define DWC3_GCTL_SCALEDOWN(n) ((n) << 4)
 #define DWC3_GCTL_DISSCRAMBLE  (1 << 3)
 #define DWC3_GCTL_DSBLCLKGTNG  (1 << 0)
 
 #define DWC3_GTXFIFOSIZ_TXFSTADDR(n) ((n) & 0xffff0000)
 
 /* Global HWPARAMS1 Register */
-#define DWC3_GHWPARAMS1_EN_PWROPT(n)   ((n & (3 << 24)) >> 24)
+#define DWC3_GHWPARAMS1_EN_PWROPT(n)   (((n) & (3 << 24)) >> 24)
 #define DWC3_GHWPARAMS1_EN_PWROPT_NO   0
 #define DWC3_GHWPARAMS1_EN_PWROPT_CLK  1
 
 
 /* Device Endpoint Command Register */
 #define DWC3_DEPCMD_PARAM_SHIFT                16
-#define DWC3_DEPCMD_PARAM(x)           (x << DWC3_DEPCMD_PARAM_SHIFT)
-#define DWC3_DEPCMD_GET_RSC_IDX(x)     ((x >> DWC3_DEPCMD_PARAM_SHIFT) & 0x7f)
+#define DWC3_DEPCMD_PARAM(x)           ((x) << DWC3_DEPCMD_PARAM_SHIFT)
+#define DWC3_DEPCMD_GET_RSC_IDX(x)     (((x) >> DWC3_DEPCMD_PARAM_SHIFT) & 0x7f)
 #define DWC3_DEPCMD_STATUS_MASK                (0x0f << 12)
-#define DWC3_DEPCMD_STATUS(x)          ((x & DWC3_DEPCMD_STATUS_MASK) >> 12)
+#define DWC3_DEPCMD_STATUS(x)          (((x) & DWC3_DEPCMD_STATUS_MASK) >> 12)
 #define DWC3_DEPCMD_HIPRI_FORCERM      (1 << 11)
 #define DWC3_DEPCMD_CMDACT             (1 << 10)
 #define DWC3_DEPCMD_CMDIOC             (1 << 8)
@@ -683,9 +683,9 @@ struct dwc3_event_depevt {
 #define DEPEVT_STATUS_TRANSFER_ACTIVE  (1 << 3)
 
 /* Within XferComplete */
-#define DEPEVT_STATUS_BUSERR    (1 << 0)
-#define DEPEVT_STATUS_SHORT     (1 << 1)
-#define DEPEVT_STATUS_IOC       (1 << 2)
+#define DEPEVT_STATUS_BUSERR   (1 << 0)
+#define DEPEVT_STATUS_SHORT    (1 << 1)
+#define DEPEVT_STATUS_IOC      (1 << 2)
 #define DEPEVT_STATUS_LST      (1 << 3)
 
 /* Stream event only */
index 05d3a3e..74bac06 100644 (file)
@@ -69,7 +69,7 @@ static int __devinit dwc3_pci_probe(struct pci_dev *pci,
                return -ENOMEM;
        }
 
-       glue->dev       = dev;
+       glue->dev = dev;
 
        ret = pci_enable_device(pci);
        if (ret) {
@@ -114,7 +114,7 @@ static int __devinit dwc3_pci_probe(struct pci_dev *pci,
        dwc3->dev.dma_mask = dev->dma_mask;
        dwc3->dev.dma_parms = dev->dma_parms;
        dwc3->dev.parent = dev;
-       glue->dwc3      = dwc3;
+       glue->dwc3 = dwc3;
 
        ret = platform_device_add(dwc3);
        if (ret) {
index 5a06709..4fa2c98 100644 (file)
@@ -374,7 +374,7 @@ static int dwc3_ep0_handle_feature(struct dwc3 *dwc,
        case USB_RECIP_ENDPOINT:
                switch (wValue) {
                case USB_ENDPOINT_HALT:
-                       dep =  dwc3_wIndex_to_dep(dwc, wIndex);
+                       dep = dwc3_wIndex_to_dep(dwc, wIndex);
                        if (!dep)
                                return -EINVAL;
                        ret = __dwc3_gadget_ep_set_halt(dep, set);
index eeba222..d121e73 100644 (file)
@@ -548,7 +548,7 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep,
 
                memset(&trb_link, 0, sizeof(trb_link));
 
-               /* Link TRB for ISOC. The HWO but is never reset */
+               /* Link TRB for ISOC. The HWO bit is never reset */
                trb_st_hw = &dep->trb_pool[0];
 
                trb_link = &dep->trb_pool[DWC3_TRB_NUM - 1];
@@ -818,9 +818,9 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep,
  * @dep: endpoint for which requests are being prepared
  * @starting: true if the endpoint is idle and no requests are queued.
  *
- * The functions goes through the requests list and setups TRBs for the
- * transfers. The functions returns once there are not more TRBs available or
- * it run out of requests.
+ * The function goes through the requests list and sets up TRBs for the
+ * transfers. The function returns once there are no more TRBs available or
+ * it runs out of requests.
  */
 static void dwc3_prepare_trbs(struct dwc3_ep *dep, bool starting)
 {
@@ -834,8 +834,8 @@ static void dwc3_prepare_trbs(struct dwc3_ep *dep, bool starting)
        trbs_left = (dep->busy_slot - dep->free_slot) & DWC3_TRB_MASK;
 
        /*
-        * if busy & slot are equal than it is either full or empty. If we are
-        * starting to proceed requests then we are empty. Otherwise we ar
+        * If busy & slot are equal than it is either full or empty. If we are
+        * starting to process requests then we are empty. Otherwise we are
         * full and don't do anything
         */
        if (!trbs_left) {
@@ -846,7 +846,7 @@ static void dwc3_prepare_trbs(struct dwc3_ep *dep, bool starting)
                 * In case we start from scratch, we queue the ISOC requests
                 * starting from slot 1. This is done because we use ring
                 * buffer and have no LST bit to stop us. Instead, we place
-                * IOC bit TRB_NUM/4. We try to avoid to having an interrupt
+                * IOC bit every TRB_NUM/4. We try to avoid having an interrupt
                 * after the first request so we start at slot 1 and have
                 * 7 requests proceed before we hit the first IOC.
                 * Other transfer types don't use the ring buffer and are
@@ -882,8 +882,8 @@ static void dwc3_prepare_trbs(struct dwc3_ep *dep, bool starting)
                                length = sg_dma_len(s);
                                dma = sg_dma_address(s);
 
-                               if (i == (request->num_mapped_sgs - 1)
-                                               || sg_is_last(s)) {
+                               if (i == (request->num_mapped_sgs - 1) ||
+                                               sg_is_last(s)) {
                                        last_one = true;
                                        chain = false;
                                }
@@ -951,8 +951,7 @@ static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep, u16 cmd_param,
                dwc3_prepare_trbs(dep, start_new);
 
                /*
-                * req points to the first request where HWO changed
-                * from 0 to 1
+                * req points to the first request where HWO changed from 0 to 1
                 */
                req = next_request(&dep->req_queued);
        }
@@ -978,7 +977,7 @@ static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep, u16 cmd_param,
                /*
                 * FIXME we need to iterate over the list of requests
                 * here and stop, unmap, free and del each of the linked
-                * requests instead of we do now.
+                * requests instead of what we do now.
                 */
                dwc3_unmap_buffer_from_dma(req);
                list_del(&req->list);
@@ -1011,7 +1010,7 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req)
         * particular token from the Host side.
         *
         * This will also avoid Host cancelling URBs due to too
-        * many NACKs.
+        * many NAKs.
         */
        dwc3_map_buffer_to_dma(req);
        list_add_tail(&req->list, &dep->request_list);
@@ -1034,10 +1033,10 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req)
 
                start_trans = 1;
                if (usb_endpoint_xfer_isoc(dep->desc) &&
-                               dep->flags & DWC3_EP_BUSY)
+                               (dep->flags & DWC3_EP_BUSY))
                        start_trans = 0;
 
-               ret =  __dwc3_gadget_kick_transfer(dep, 0, start_trans);
+               ret = __dwc3_gadget_kick_transfer(dep, 0, start_trans);
                if (ret && ret != -EBUSY) {
                        struct dwc3     *dwc = dep->dwc;
 
@@ -1291,10 +1290,10 @@ static int dwc3_gadget_wakeup(struct usb_gadget *g)
        reg &= ~DWC3_DCTL_ULSTCHNGREQ_MASK;
        dwc3_writel(dwc->regs, DWC3_DCTL, reg);
 
-       /* pool until Link State change to ON */
+       /* poll until Link State changes to ON */
        timeout = jiffies + msecs_to_jiffies(100);
 
-       while (!(time_after(jiffies, timeout))) {
+       while (!time_after(jiffies, timeout)) {
                reg = dwc3_readl(dwc->regs, DWC3_DSTS);
 
                /* in HS, means ON */
@@ -1558,10 +1557,10 @@ static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep,
                if ((trb->ctrl & DWC3_TRB_CTRL_HWO) && status != -ESHUTDOWN)
                        /*
                         * We continue despite the error. There is not much we
-                        * can do. If we don't clean in up we loop for ever. If
-                        * we skip the TRB than it gets overwritten reused after
-                        * a while since we use them in a ring buffer. a BUG()
-                        * would help. Lets hope that if this occures, someone
+                        * can do. If we don't clean it up we loop forever. If
+                        * we skip the TRB then it gets overwritten after a
+                        * while since we use them in a ring buffer. A BUG()
+                        * would help. Lets hope that if this occurs, someone
                         * fixes the root cause instead of looking away :)
                         */
                        dev_err(dwc->dev, "%s's TRB (%p) still owned by HW\n",
@@ -1614,7 +1613,7 @@ static void dwc3_endpoint_transfer_complete(struct dwc3 *dwc,
        if (event->status & DEPEVT_STATUS_BUSERR)
                status = -ECONNRESET;
 
-       clean_busy =  dwc3_cleanup_done_reqs(dwc, dep, event, status);
+       clean_busy = dwc3_cleanup_done_reqs(dwc, dep, event, status);
        if (clean_busy) {
                dep->flags &= ~DWC3_EP_BUSY;
                dep->res_trans_idx = 0;
@@ -1678,8 +1677,8 @@ static void dwc3_process_ep_cmd_complete(struct dwc3_ep *dep,
        struct dwc3_event_depevt mod_ev = *event;
 
        /*
-        * We were asked to remove one requests. It is possible that this
-        * request and a few other were started together and have the same
+        * We were asked to remove one request. It is possible that this
+        * request and a few others were started together and have the same
         * transfer index. Since we stopped the complete endpoint we don't
         * know how many requests were already completed (and not yet)
         * reported and how could be done (later). We purge them all until
@@ -1688,7 +1687,7 @@ static void dwc3_process_ep_cmd_complete(struct dwc3_ep *dep,
        mod_ev.status = DEPEVT_STATUS_LST;
        dwc3_cleanup_done_reqs(dwc, dep, &mod_ev, -ESHUTDOWN);
        dep->flags &= ~DWC3_EP_BUSY;
-       /* pending requets are ignored and are queued on XferNotReady */
+       /* pending requests are ignored and are queued on XferNotReady */
 }
 
 static void dwc3_ep_cmd_compl(struct dwc3_ep *dep,
@@ -2285,7 +2284,7 @@ static irqreturn_t dwc3_interrupt(int irq, void *_dwc)
 
 /**
  * dwc3_gadget_init - Initializes gadget related registers
- * @dwc: Pointer to out controller context structure
+ * @dwc: pointer to our controller context structure
  *
  * Returns 0 on success otherwise negative errno.
  */