*/
#define MAX_SGE_TIMERVAL 200U
-#ifdef CONFIG_PCI_IOV
-/*
- * Virtual Function provisioning constants. We need two extra Ingress Queues
- * with Interrupt capability to serve as the VF's Firmware Event Queue and
- * Forwarded Interrupt Queue (when using MSI mode) -- neither will have Free
- * Lists associated with them). For each Ethernet/Control Egress Queue and
- * for each Free List, we need an Egress Context.
- */
enum {
+ /*
+ * Physical Function provisioning constants.
+ */
+ PFRES_NVI = 4, /* # of Virtual Interfaces */
+ PFRES_NETHCTRL = 128, /* # of EQs used for ETH or CTRL Qs */
+ PFRES_NIQFLINT = 128, /* # of ingress Qs/w Free List(s)/intr
+ */
+ PFRES_NEQ = 256, /* # of egress queues */
+ PFRES_NIQ = 0, /* # of ingress queues */
+ PFRES_TC = 0, /* PCI-E traffic class */
+ PFRES_NEXACTF = 128, /* # of exact MPS filters */
+
+ PFRES_R_CAPS = FW_CMD_CAP_PF,
+ PFRES_WX_CAPS = FW_CMD_CAP_PF,
+
+#ifdef CONFIG_PCI_IOV
+ /*
+ * Virtual Function provisioning constants. We need two extra Ingress
+ * Queues with Interrupt capability to serve as the VF's Firmware
+ * Event Queue and Forwarded Interrupt Queue (when using MSI mode) --
+ * neither will have Free Lists associated with them). For each
+ * Ethernet/Control Egress Queue and for each Free List, we need an
+ * Egress Context.
+ */
VFRES_NPORTS = 1, /* # of "ports" per VF */
VFRES_NQSETS = 2, /* # of "Queue Sets" per VF */
VFRES_NVI = VFRES_NPORTS, /* # of Virtual Interfaces */
VFRES_NETHCTRL = VFRES_NQSETS, /* # of EQs used for ETH or CTRL Qs */
VFRES_NIQFLINT = VFRES_NQSETS+2,/* # of ingress Qs/w Free List(s)/intr */
- VFRES_NIQ = 0, /* # of non-fl/int ingress queues */
VFRES_NEQ = VFRES_NQSETS*2, /* # of egress queues */
+ VFRES_NIQ = 0, /* # of non-fl/int ingress queues */
VFRES_TC = 0, /* PCI-E traffic class */
VFRES_NEXACTF = 16, /* # of exact MPS filters */
VFRES_R_CAPS = FW_CMD_CAP_DMAQ|FW_CMD_CAP_VF|FW_CMD_CAP_PORT,
VFRES_WX_CAPS = FW_CMD_CAP_DMAQ|FW_CMD_CAP_VF,
+#endif
};
/*
}
/*NOTREACHED*/
}
-#endif
enum {
MAX_TXQ_ENTRIES = 16384,
module_param(force_init, uint, 0644);
MODULE_PARM_DESC(force_init, "Forcibly become Master PF and initialize adapter");
+/*
+ * Normally if the firmware we connect to has Configuration File support, we
+ * use that and only fall back to the old Driver-based initialization if the
+ * Configuration File fails for some reason. If force_old_init is set, then
+ * we'll always use the old Driver-based initialization sequence.
+ */
+static uint force_old_init;
+
+module_param(force_old_init, uint, 0644);
+MODULE_PARM_DESC(force_old_init, "Force old initialization sequence");
+
static int dflt_msg_enable = DFLT_MSG_ENABLE;
module_param(dflt_msg_enable, int, 0644);
MODULE_PARM_DESC(num_vf, "number of VFs for each of PFs 0-3");
#endif
+/*
+ * The filter TCAM has a fixed portion and a variable portion. The fixed
+ * portion can match on source/destination IP IPv4/IPv6 addresses and TCP/UDP
+ * ports. The variable portion is 36 bits which can include things like Exact
+ * Match MAC Index (9 bits), Ether Type (16 bits), IP Protocol (8 bits),
+ * [Inner] VLAN Tag (17 bits), etc. which, if all were somehow selected, would
+ * far exceed the 36-bit budget for this "compressed" header portion of the
+ * filter. Thus, we have a scarce resource which must be carefully managed.
+ *
+ * By default we set this up to mostly match the set of filter matching
+ * capabilities of T3 but with accommodations for some of T4's more
+ * interesting features:
+ *
+ * { IP Fragment (1), MPS Match Type (3), IP Protocol (8),
+ * [Inner] VLAN (17), Port (3), FCoE (1) }
+ */
+enum {
+ TP_VLAN_PRI_MAP_DEFAULT = HW_TPL_FR_MT_PR_IV_P_FC,
+ TP_VLAN_PRI_MAP_FIRST = FCOE_SHIFT,
+ TP_VLAN_PRI_MAP_LAST = FRAGMENTATION_SHIFT,
+};
+
+static unsigned int tp_vlan_pri_map = TP_VLAN_PRI_MAP_DEFAULT;
+
static struct dentry *cxgb4_debugfs_root;
static LIST_HEAD(adapter_list);
return ret;
}
+/*
+ * Attempt to initialize the adapter via hard-coded, driver supplied
+ * parameters ...
+ */
+static int adap_init0_no_config(struct adapter *adapter, int reset)
+{
+ struct sge *s = &adapter->sge;
+ struct fw_caps_config_cmd caps_cmd;
+ u32 v;
+ int i, ret;
+
+ /*
+ * Reset device if necessary
+ */
+ if (reset) {
+ ret = t4_fw_reset(adapter, adapter->mbox,
+ PIORSTMODE | PIORST);
+ if (ret < 0)
+ goto bye;
+ }
+
+ /*
+ * Get device capabilities and select which we'll be using.
+ */
+ memset(&caps_cmd, 0, sizeof(caps_cmd));
+ caps_cmd.op_to_write = htonl(FW_CMD_OP(FW_CAPS_CONFIG_CMD) |
+ FW_CMD_REQUEST | FW_CMD_READ);
+ caps_cmd.retval_len16 = htonl(FW_LEN16(caps_cmd));
+ ret = t4_wr_mbox(adapter, adapter->mbox, &caps_cmd, sizeof(caps_cmd),
+ &caps_cmd);
+ if (ret < 0)
+ goto bye;
+
+#ifndef CONFIG_CHELSIO_T4_OFFLOAD
+ /*
+ * If we're a pure NIC driver then disable all offloading facilities.
+ * This will allow the firmware to optimize aspects of the hardware
+ * configuration which will result in improved performance.
+ */
+ caps_cmd.ofldcaps = 0;
+ caps_cmd.iscsicaps = 0;
+ caps_cmd.rdmacaps = 0;
+ caps_cmd.fcoecaps = 0;
+#endif
+
+ if (caps_cmd.niccaps & htons(FW_CAPS_CONFIG_NIC_VM)) {
+ if (!vf_acls)
+ caps_cmd.niccaps ^= htons(FW_CAPS_CONFIG_NIC_VM);
+ else
+ caps_cmd.niccaps = htons(FW_CAPS_CONFIG_NIC_VM);
+ } else if (vf_acls) {
+ dev_err(adapter->pdev_dev, "virtualization ACLs not supported");
+ goto bye;
+ }
+ caps_cmd.op_to_write = htonl(FW_CMD_OP(FW_CAPS_CONFIG_CMD) |
+ FW_CMD_REQUEST | FW_CMD_WRITE);
+ ret = t4_wr_mbox(adapter, adapter->mbox, &caps_cmd, sizeof(caps_cmd),
+ NULL);
+ if (ret < 0)
+ goto bye;
+
+ /*
+ * Tweak configuration based on system architecture, module
+ * parameters, etc.
+ */
+ ret = adap_init0_tweaks(adapter);
+ if (ret < 0)
+ goto bye;
+
+ /*
+ * Select RSS Global Mode we want to use. We use "Basic Virtual"
+ * mode which maps each Virtual Interface to its own section of
+ * the RSS Table and we turn on all map and hash enables ...
+ */
+ adapter->flags |= RSS_TNLALLLOOKUP;
+ ret = t4_config_glbl_rss(adapter, adapter->mbox,
+ FW_RSS_GLB_CONFIG_CMD_MODE_BASICVIRTUAL,
+ FW_RSS_GLB_CONFIG_CMD_TNLMAPEN |
+ FW_RSS_GLB_CONFIG_CMD_HASHTOEPLITZ |
+ ((adapter->flags & RSS_TNLALLLOOKUP) ?
+ FW_RSS_GLB_CONFIG_CMD_TNLALLLKP : 0));
+ if (ret < 0)
+ goto bye;
+
+ /*
+ * Set up our own fundamental resource provisioning ...
+ */
+ ret = t4_cfg_pfvf(adapter, adapter->mbox, adapter->fn, 0,
+ PFRES_NEQ, PFRES_NETHCTRL,
+ PFRES_NIQFLINT, PFRES_NIQ,
+ PFRES_TC, PFRES_NVI,
+ FW_PFVF_CMD_CMASK_MASK,
+ pfvfres_pmask(adapter, adapter->fn, 0),
+ PFRES_NEXACTF,
+ PFRES_R_CAPS, PFRES_WX_CAPS);
+ if (ret < 0)
+ goto bye;
+
+ /*
+ * Perform low level SGE initialization. We need to do this before we
+ * send the firmware the INITIALIZE command because that will cause
+ * any other PF Drivers which are waiting for the Master
+ * Initialization to proceed forward.
+ */
+ for (i = 0; i < SGE_NTIMERS - 1; i++)
+ s->timer_val[i] = min(intr_holdoff[i], MAX_SGE_TIMERVAL);
+ s->timer_val[SGE_NTIMERS - 1] = MAX_SGE_TIMERVAL;
+ s->counter_val[0] = 1;
+ for (i = 1; i < SGE_NCOUNTERS; i++)
+ s->counter_val[i] = min(intr_cnt[i - 1],
+ THRESHOLD_0_GET(THRESHOLD_0_MASK));
+ t4_sge_init(adapter);
+
+#ifdef CONFIG_PCI_IOV
+ /*
+ * Provision resource limits for Virtual Functions. We currently
+ * grant them all the same static resource limits except for the Port
+ * Access Rights Mask which we're assigning based on the PF. All of
+ * the static provisioning stuff for both the PF and VF really needs
+ * to be managed in a persistent manner for each device which the
+ * firmware controls.
+ */
+ {
+ int pf, vf;
+
+ for (pf = 0; pf < ARRAY_SIZE(num_vf); pf++) {
+ if (num_vf[pf] <= 0)
+ continue;
+
+ /* VF numbering starts at 1! */
+ for (vf = 1; vf <= num_vf[pf]; vf++) {
+ ret = t4_cfg_pfvf(adapter, adapter->mbox,
+ pf, vf,
+ VFRES_NEQ, VFRES_NETHCTRL,
+ VFRES_NIQFLINT, VFRES_NIQ,
+ VFRES_TC, VFRES_NVI,
+ FW_PFVF_CMD_CMASK_GET(
+ FW_PFVF_CMD_CMASK_MASK),
+ pfvfres_pmask(
+ adapter, pf, vf),
+ VFRES_NEXACTF,
+ VFRES_R_CAPS, VFRES_WX_CAPS);
+ if (ret < 0)
+ dev_warn(adapter->pdev_dev,
+ "failed to "\
+ "provision pf/vf=%d/%d; "
+ "err=%d\n", pf, vf, ret);
+ }
+ }
+ }
+#endif
+
+ /*
+ * Set up the default filter mode. Later we'll want to implement this
+ * via a firmware command, etc. ... This needs to be done before the
+ * firmare initialization command ... If the selected set of fields
+ * isn't equal to the default value, we'll need to make sure that the
+ * field selections will fit in the 36-bit budget.
+ */
+ if (tp_vlan_pri_map != TP_VLAN_PRI_MAP_DEFAULT) {
+ int i, bits = 0;
+
+ for (i = TP_VLAN_PRI_MAP_FIRST; i <= TP_VLAN_PRI_MAP_LAST; i++)
+ switch (tp_vlan_pri_map & (1 << i)) {
+ case 0:
+ /* compressed filter field not enabled */
+ break;
+ case FCOE_MASK:
+ bits += 1;
+ break;
+ case PORT_MASK:
+ bits += 3;
+ break;
+ case VNIC_ID_MASK:
+ bits += 17;
+ break;
+ case VLAN_MASK:
+ bits += 17;
+ break;
+ case TOS_MASK:
+ bits += 8;
+ break;
+ case PROTOCOL_MASK:
+ bits += 8;
+ break;
+ case ETHERTYPE_MASK:
+ bits += 16;
+ break;
+ case MACMATCH_MASK:
+ bits += 9;
+ break;
+ case MPSHITTYPE_MASK:
+ bits += 3;
+ break;
+ case FRAGMENTATION_MASK:
+ bits += 1;
+ break;
+ }
+
+ if (bits > 36) {
+ dev_err(adapter->pdev_dev,
+ "tp_vlan_pri_map=%#x needs %d bits > 36;"\
+ " using %#x\n", tp_vlan_pri_map, bits,
+ TP_VLAN_PRI_MAP_DEFAULT);
+ tp_vlan_pri_map = TP_VLAN_PRI_MAP_DEFAULT;
+ }
+ }
+ v = tp_vlan_pri_map;
+ t4_write_indirect(adapter, TP_PIO_ADDR, TP_PIO_DATA,
+ &v, 1, TP_VLAN_PRI_MAP);
+
+ /*
+ * We need Five Tuple Lookup mode to be set in TP_GLOBAL_CONFIG order
+ * to support any of the compressed filter fields above. Newer
+ * versions of the firmware do this automatically but it doesn't hurt
+ * to set it here. Meanwhile, we do _not_ need to set Lookup Every
+ * Packet in TP_INGRESS_CONFIG to support matching non-TCP packets
+ * since the firmware automatically turns this on and off when we have
+ * a non-zero number of filters active (since it does have a
+ * performance impact).
+ */
+ if (tp_vlan_pri_map)
+ t4_set_reg_field(adapter, TP_GLOBAL_CONFIG,
+ FIVETUPLELOOKUP_MASK,
+ FIVETUPLELOOKUP_MASK);
+
+ /*
+ * Tweak some settings.
+ */
+ t4_write_reg(adapter, TP_SHIFT_CNT, SYNSHIFTMAX(6) |
+ RXTSHIFTMAXR1(4) | RXTSHIFTMAXR2(15) |
+ PERSHIFTBACKOFFMAX(8) | PERSHIFTMAX(8) |
+ KEEPALIVEMAXR1(4) | KEEPALIVEMAXR2(9));
+
+ /*
+ * Get basic stuff going by issuing the Firmware Initialize command.
+ * Note that this _must_ be after all PFVF commands ...
+ */
+ ret = t4_fw_initialize(adapter, adapter->mbox);
+ if (ret < 0)
+ goto bye;
+
+ /*
+ * Return successfully!
+ */
+ dev_info(adapter->pdev_dev, "Successfully configured using built-in "\
+ "driver parameters\n");
+ return 0;
+
+ /*
+ * Something bad happened. Return the error ...
+ */
+bye:
+ return ret;
+}
+
/*
* Phase 0 of initialization: contact FW, obtain config, perform basic init.
*/
goto bye;
/*
- * Find out what ports are available to us.
+ * Find out what ports are available to us. Note that we need to do
+ * this before calling adap_init0_no_config() since it needs nports
+ * and portvec ...
*/
v =
FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) |
} else {
dev_info(adap->pdev_dev, "Coming up as MASTER: "\
"Initializing adapter\n");
- /*
- * Find out whether we're dealing with a version of
- * the firmware which has configuration file support.
- */
- params[0] = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) |
- FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_CF));
- ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 1,
- params, val);
/*
* If the firmware doesn't support Configuration
* Files warn user and exit,
*/
if (ret < 0)
- dev_warn(adap->pdev_dev, "Firmware doesn't support "\
+ dev_warn(adap->pdev_dev, "Firmware doesn't support "
"configuration file.\n");
+ if (force_old_init)
+ ret = adap_init0_no_config(adap, reset);
else {
/*
- * The firmware provides us with a memory
- * buffer where we can load a Configuration
- * File from the host if we want to override
- * the Configuration File in flash.
+ * Find out whether we're dealing with a version of
+ * the firmware which has configuration file support.
*/
+ params[0] = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) |
+ FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_CF));
+ ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 1,
+ params, val);
- ret = adap_init0_config(adap, reset);
- if (ret == -ENOENT) {
- dev_info(adap->pdev_dev,
- "No Configuration File present "
- "on adapter.\n");
+ /*
+ * If the firmware doesn't support Configuration
+ * Files, use the old Driver-based, hard-wired
+ * initialization. Otherwise, try using the
+ * Configuration File support and fall back to the
+ * Driver-based initialization if there's no
+ * Configuration File found.
+ */
+ if (ret < 0)
+ ret = adap_init0_no_config(adap, reset);
+ else {
+ /*
+ * The firmware provides us with a memory
+ * buffer where we can load a Configuration
+ * File from the host if we want to override
+ * the Configuration File in flash.
+ */
+
+ ret = adap_init0_config(adap, reset);
+ if (ret == -ENOENT) {
+ dev_info(adap->pdev_dev,
+ "No Configuration File present "
+ "on adapter. Using hard-wired "
+ "configuration parameters.\n");
+ ret = adap_init0_no_config(adap, reset);
+ }
}
}
if (ret < 0) {
*/
memset(&caps_cmd, 0, sizeof(caps_cmd));
caps_cmd.op_to_write = htonl(V_FW_CMD_OP(FW_CAPS_CONFIG_CMD) |
- F_FW_CMD_REQUEST | F_FW_CMD_READ);
- caps_cmd.cfvalid_to_len16 = htonl(FW_LEN16(caps_cmd));
+ FW_CMD_REQUEST | FW_CMD_READ);
+ caps_cmd.retval_len16 = htonl(FW_LEN16(caps_cmd));
ret = t4_wr_mbox(adap, adap->mbox, &caps_cmd, sizeof(caps_cmd),
&caps_cmd);
if (ret < 0)
goto bye;
- if (caps_cmd.toecaps) {
+ if (caps_cmd.ofldcaps) {
/* query offload-related parameters */
params[0] = FW_PARAM_DEV(NTID);
params[1] = FW_PARAM_PFVF(SERVER_START);
#define VLANEXTENABLE_MASK 0x0000f000U
#define VLANEXTENABLE_SHIFT 12
+#define TP_GLOBAL_CONFIG 0x7d08
+#define FIVETUPLELOOKUP_SHIFT 17
+#define FIVETUPLELOOKUP_MASK 0x00060000U
+#define FIVETUPLELOOKUP(x) ((x) << FIVETUPLELOOKUP_SHIFT)
+#define FIVETUPLELOOKUP_GET(x) (((x) & FIVETUPLELOOKUP_MASK) >> \
+ FIVETUPLELOOKUP_SHIFT)
+
#define TP_PARA_REG2 0x7d68
#define MAXRXDATA_MASK 0xffff0000U
#define MAXRXDATA_SHIFT 16
(((x) & DELAYEDACKRESOLUTION_MASK) >> DELAYEDACKRESOLUTION_SHIFT)
#define TP_SHIFT_CNT 0x7dc0
+#define SYNSHIFTMAX_SHIFT 24
+#define SYNSHIFTMAX_MASK 0xff000000U
+#define SYNSHIFTMAX(x) ((x) << SYNSHIFTMAX_SHIFT)
+#define SYNSHIFTMAX_GET(x) (((x) & SYNSHIFTMAX_MASK) >> \
+ SYNSHIFTMAX_SHIFT)
+#define RXTSHIFTMAXR1_SHIFT 20
+#define RXTSHIFTMAXR1_MASK 0x00f00000U
+#define RXTSHIFTMAXR1(x) ((x) << RXTSHIFTMAXR1_SHIFT)
+#define RXTSHIFTMAXR1_GET(x) (((x) & RXTSHIFTMAXR1_MASK) >> \
+ RXTSHIFTMAXR1_SHIFT)
+#define RXTSHIFTMAXR2_SHIFT 16
+#define RXTSHIFTMAXR2_MASK 0x000f0000U
+#define RXTSHIFTMAXR2(x) ((x) << RXTSHIFTMAXR2_SHIFT)
+#define RXTSHIFTMAXR2_GET(x) (((x) & RXTSHIFTMAXR2_MASK) >> \
+ RXTSHIFTMAXR2_SHIFT)
+#define PERSHIFTBACKOFFMAX_SHIFT 12
+#define PERSHIFTBACKOFFMAX_MASK 0x0000f000U
+#define PERSHIFTBACKOFFMAX(x) ((x) << PERSHIFTBACKOFFMAX_SHIFT)
+#define PERSHIFTBACKOFFMAX_GET(x) (((x) & PERSHIFTBACKOFFMAX_MASK) >> \
+ PERSHIFTBACKOFFMAX_SHIFT)
+#define PERSHIFTMAX_SHIFT 8
+#define PERSHIFTMAX_MASK 0x00000f00U
+#define PERSHIFTMAX(x) ((x) << PERSHIFTMAX_SHIFT)
+#define PERSHIFTMAX_GET(x) (((x) & PERSHIFTMAX_MASK) >> \
+ PERSHIFTMAX_SHIFT)
+#define KEEPALIVEMAXR1_SHIFT 4
+#define KEEPALIVEMAXR1_MASK 0x000000f0U
+#define KEEPALIVEMAXR1(x) ((x) << KEEPALIVEMAXR1_SHIFT)
+#define KEEPALIVEMAXR1_GET(x) (((x) & KEEPALIVEMAXR1_MASK) >> \
+ KEEPALIVEMAXR1_SHIFT)
+#define KEEPALIVEMAXR2_SHIFT 0
+#define KEEPALIVEMAXR2_MASK 0x0000000fU
+#define KEEPALIVEMAXR2(x) ((x) << KEEPALIVEMAXR2_SHIFT)
+#define KEEPALIVEMAXR2_GET(x) (((x) & KEEPALIVEMAXR2_MASK) >> \
+ KEEPALIVEMAXR2_SHIFT)
#define TP_CCTRL_TABLE 0x7ddc
#define TP_MTU_TABLE 0x7de4
#define TP_INT_CAUSE 0x7e74
#define FLMTXFLSTEMPTY 0x40000000U
+#define TP_VLAN_PRI_MAP 0x140
+#define FRAGMENTATION_SHIFT 9
+#define FRAGMENTATION_MASK 0x00000200U
+#define MPSHITTYPE_MASK 0x00000100U
+#define MACMATCH_MASK 0x00000080U
+#define ETHERTYPE_MASK 0x00000040U
+#define PROTOCOL_MASK 0x00000020U
+#define TOS_MASK 0x00000010U
+#define VLAN_MASK 0x00000008U
+#define VNIC_ID_MASK 0x00000004U
+#define PORT_MASK 0x00000002U
+#define FCOE_SHIFT 0
+#define FCOE_MASK 0x00000001U
+
#define TP_INGRESS_CONFIG 0x141
#define VNIC 0x00000800U
#define CSUM_HAS_PSEUDO_HDR 0x00000400U
git.openpandora.org / pandora-kernel.git / commitdiff