[SCSI] qla2xxx: Code cleanup to remove unwanted comments and code.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com>
Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c
index 6ea5e98..22b0d78 100644 (file)
--- a/drivers/scsi/qla2xxx/qla_nx.c
+++ b/drivers/scsi/qla2xxx/qla_nx.c
@@ -1253,25 +1253,6 @@ qla82xx_pinit_from_rom(scsi_qla_host_t *vha)
        return 0;
 }
 
-static int
-qla82xx_check_for_bad_spd(struct qla_hw_data *ha)
-{
-       u32 val = 0;
-       val = qla82xx_rd_32(ha, BOOT_LOADER_DIMM_STATUS);
-       val &= QLA82XX_BOOT_LOADER_MN_ISSUE;
-       if (val & QLA82XX_PEG_TUNE_MN_SPD_ZEROED) {
-               qla_printk(KERN_INFO, ha,
-                       "Memory DIMM SPD not programmed. "
-                       " Assumed valid.\n");
-               return 1;
-       } else if (val) {
-               qla_printk(KERN_INFO, ha,
-                       "Memory DIMM type incorrect.Info:%08X.\n", val);
-               return 2;
-       }
-       return 0;
-}
-
 static int
 qla82xx_pci_mem_write_2M(struct qla_hw_data *ha,
                u64 off, void *data, int size)
@@ -1337,11 +1318,6 @@ qla82xx_pci_mem_write_2M(struct qla_hw_data *ha,
                word[startword+1] |= tmpw >> (sz[0] * 8);
        }
 
-       /*
-        * don't lock here - write_wx gets the lock if each time
-        * write_lock_irqsave(&adapter->adapter_lock, flags);
-        * netxen_nic_pci_change_crbwindow_128M(adapter, 0);
-        */
        for (i = 0; i < loop; i++) {
                temp = off8 + (i << shift_amount);
                qla82xx_wr_32(ha, mem_crb+MIU_TEST_AGT_ADDR_LO, temp);
@@ -1443,12 +1419,6 @@ qla82xx_pci_mem_read_2M(struct qla_hw_data *ha,
        off0[1] = 0;
        sz[1] = size - sz[0];
 
-       /*
-        * don't lock here - write_wx gets the lock if each time
-        * write_lock_irqsave(&adapter->adapter_lock, flags);
-        * netxen_nic_pci_change_crbwindow_128M(adapter, 0);
-        */
-
        for (i = 0; i < loop; i++) {
                temp = off8 + (i << shift_amount);
                qla82xx_wr_32(ha, mem_crb + MIU_TEST_AGT_ADDR_LO, temp);
@@ -1481,11 +1451,6 @@ qla82xx_pci_mem_read_2M(struct qla_hw_data *ha,
                }
        }
 
-       /*
-        * netxen_nic_pci_change_crbwindow_128M(adapter, 1);
-        * write_unlock_irqrestore(&adapter->adapter_lock, flags);
-        */
-
        if (j >= MAX_CTL_CHECK)
                return -1;
 
@@ -1916,7 +1881,6 @@ qla82xx_check_cmdpeg_state(struct qla_hw_data *ha)
        qla_printk(KERN_INFO, ha,
            "Cmd Peg initialization failed: 0x%x.\n", val);
 
-       qla82xx_check_for_bad_spd(ha);
        val = qla82xx_rd_32(ha, QLA82XX_ROMUSB_GLB_PEGTUNE_DONE);
        read_lock(&ha->hw_lock);
        qla82xx_wr_32(ha, CRB_CMDPEG_STATE, PHAN_INITIALIZE_FAILED);

diff --git a/drivers/scsi/qla2xxx/qla_nx.h b/drivers/scsi/qla2xxx/qla_nx.h
index 51ec0c5..ed5883f 100644 (file)
--- a/drivers/scsi/qla2xxx/qla_nx.h
+++ b/drivers/scsi/qla2xxx/qla_nx.h
@@ -523,8 +523,6 @@
 # define QLA82XX_CAM_RAM_BASE          (QLA82XX_CRB_CAM + 0x02000)
 # define QLA82XX_CAM_RAM(reg)          (QLA82XX_CAM_RAM_BASE + (reg))
 
-#define QLA82XX_PEG_TUNE_MN_SPD_ZEROED 0x80000000
-#define QLA82XX_BOOT_LOADER_MN_ISSUE   0xff00ffff
 #define QLA82XX_PORT_MODE_ADDR         (QLA82XX_CAM_RAM(0x24))
 #define QLA82XX_PEG_HALT_STATUS1       (QLA82XX_CAM_RAM(0xa8))
 #define QLA82XX_PEG_HALT_STATUS2       (QLA82XX_CAM_RAM(0xac))