Thomas Graf <tgraf@suug.ch>
Tony Luck <tony.luck@intel.com>
Tsuneo Yoshioka <Tsuneo.Yoshioka@f-secure.com>
+Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
+Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
--- /dev/null
+What: /sys/class/gpio/
+Date: July 2008
+KernelVersion: 2.6.27
+Contact: David Brownell <dbrownell@users.sourceforge.net>
+Description:
+
+ As a Kconfig option, individual GPIO signals may be accessed from
+ userspace. GPIOs are only made available to userspace by an explicit
+ "export" operation. If a given GPIO is not claimed for use by
+ kernel code, it may be exported by userspace (and unexported later).
+ Kernel code may export it for complete or partial access.
+
+ GPIOs are identified as they are inside the kernel, using integers in
+ the range 0..INT_MAX. See Documentation/gpio.txt for more information.
+
+ /sys/class/gpio
+ /export ... asks the kernel to export a GPIO to userspace
+ /unexport ... to return a GPIO to the kernel
+ /gpioN ... for each exported GPIO #N
+ /value ... always readable, writes fail for input GPIOs
+ /direction ... r/w as: in, out (default low); write: high, low
+ /gpiochipN ... for each gpiochip; #N is its first GPIO
+ /base ... (r/o) same as N
+ /label ... (r/o) descriptive, not necessarily unique
+ /ngpio ... (r/o) number of GPIOs; numbered N to N + (ngpio - 1)
+
dma_addr_t dma_handle;
dma_handle = pci_map_single(pdev, addr, size, direction);
- if (pci_dma_mapping_error(dma_handle)) {
+ if (pci_dma_mapping_error(pdev, dma_handle)) {
/*
* reduce current DMA mapping usage,
* delay and try again later or
There is an exception to the above. If hotplug functionality is used
to remove all the CPUs that are currently assigned to a cpuset,
-then the kernel will automatically update the cpus_allowed of all
-tasks attached to CPUs in that cpuset to allow all CPUs. When memory
-hotplug functionality for removing Memory Nodes is available, a
-similar exception is expected to apply there as well. In general,
-the kernel prefers to violate cpuset placement, over starving a task
-that has had all its allowed CPUs or Memory Nodes taken offline. User
-code should reconfigure cpusets to only refer to online CPUs and Memory
-Nodes when using hotplug to add or remove such resources.
+then all the tasks in that cpuset will be moved to the nearest ancestor
+with non-empty cpus. But the moving of some (or all) tasks might fail if
+cpuset is bound with another cgroup subsystem which has some restrictions
+on task attaching. In this failing case, those tasks will stay
+in the original cpuset, and the kernel will automatically update
+their cpus_allowed to allow all online CPUs. When memory hotplug
+functionality for removing Memory Nodes is available, a similar exception
+is expected to apply there as well. In general, the kernel prefers to
+violate cpuset placement, over starving a task that has had all
+its allowed CPUs or Memory Nodes taken offline.
There is a second exception to the above. GFP_ATOMIC requests are
kernel internal allocations that must be satisfied, immediately.
- (bit 1) anonymous shared memory
- (bit 2) file-backed private memory
- (bit 3) file-backed shared memory
+ - (bit 4) ELF header pages in file-backed private memory areas (it is
+ effective only if the bit 2 is cleared)
Note that MMIO pages such as frame buffer are never dumped and vDSO pages
are always dumped regardless of the bitmask status.
softlockup_thresh:
-This value can be used to lower the softlockup tolerance
-threshold. The default threshold is 10s. If a cpu is locked up
-for 10s, the kernel complains. Valid values are 1-60s.
+This value can be used to lower the softlockup tolerance threshold. The
+default threshold is 60 seconds. If a cpu is locked up for 60 seconds,
+the kernel complains. Valid values are 1-60 seconds. Setting this
+tunable to zero will disable the softlockup detection altogether.
==============================================================
are called in the reverse temporal order they were submitted.
This way no data can be reordered.
+usb_unlink_anchored_urbs()
+--------------------------
+
+This function unlinks all URBs associated with an anchor. The URBs
+are processed in the reverse temporal order they were submitted.
+This is similar to usb_kill_anchored_urbs(), but it will not sleep.
+Therefore no guarantee is made that the URBs have been unlinked when
+the call returns. They may be unlinked later but will be unlinked in
+finite time.
+
usb_wait_anchor_empty_timeout()
-------------------------------
This function waits for all URBs associated with an anchor to finish
or a timeout, whichever comes first. Its return value will tell you
whether the timeout was reached.
+
+
S: Supported
ACPI WMI DRIVER
-P: Carlos Corbacho
-M: carlos@strangeworlds.co.uk
-L: linux-acpi@vger.kernel.org
-W: http://www.lesswatts.org/projects/acpi/
-S: Maintained
+P: Carlos Corbacho
+M: carlos@strangeworlds.co.uk
+L: linux-acpi@vger.kernel.org
+W: http://www.lesswatts.org/projects/acpi/
+S: Maintained
AD1889 ALSA SOUND DRIVER
-P: Kyle McMartin
-M: kyle@mcmartin.ca
-P: Thibaut Varene
-M: T-Bone@parisc-linux.org
-W: http://wiki.parisc-linux.org/AD1889
-L: linux-parisc@vger.kernel.org
-S: Maintained
+P: Kyle McMartin
+M: kyle@mcmartin.ca
+P: Thibaut Varene
+M: T-Bone@parisc-linux.org
+W: http://wiki.parisc-linux.org/AD1889
+L: linux-parisc@vger.kernel.org
+S: Maintained
ADM1025 HARDWARE MONITOR DRIVER
P: Jean Delvare
S: Maintained
ARM/ATMEL AT91RM9200 ARM ARCHITECTURE
-P: Andrew Victor
-M: linux@maxim.org.za
-L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
-W: http://maxim.org.za/at91_26.html
-S: Maintained
+P: Andrew Victor
+M: linux@maxim.org.za
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+W: http://maxim.org.za/at91_26.html
+S: Maintained
ARM/CIRRUS LOGIC EP93XX ARM ARCHITECTURE
P: Lennert Buytenhek
S: Maintained
ARM/HP JORNADA 7XX MACHINE SUPPORT
-P: Kristoffer Ericson
-M: kristoffer.ericson@gmail.com
-W: www.jlime.com
-S: Maintained
+P: Kristoffer Ericson
+M: kristoffer.ericson@gmail.com
+W: www.jlime.com
+S: Maintained
ARM/INTEL IOP32X ARM ARCHITECTURE
P: Lennert Buytenhek
S: Maintained
CAFE CMOS INTEGRATED CAMERA CONTROLLER DRIVER
-P: Jonathan Corbet
+P: Jonathan Corbet
M: corbet@lwn.net
L: video4linux-list@redhat.com
S: Maintained
M: Eng.Linux@digi.com
L: Eng.Linux@digi.com
W: http://www.digi.com
-S: Orphaned
+S: Orphan
DIRECTORY NOTIFICATION
P: Stephen Rothwell
S: Supported
DOCUMENTATION (/Documentation directory)
-P: Michael Kerrisk
-M: mtk.manpages@gmail.com
-P: Randy Dunlap
-M: rdunlap@xenotime.net
-L: linux-doc@vger.kernel.org
-S: Maintained
+P: Michael Kerrisk
+M: mtk.manpages@gmail.com
+P: Randy Dunlap
+M: rdunlap@xenotime.net
+L: linux-doc@vger.kernel.org
+S: Maintained
DOUBLETALK DRIVER
P: James R. Van Zandt
DVB SUBSYSTEM AND DRIVERS
P: LinuxTV.org Project
M: v4l-dvb-maintainer@linuxtv.org
-L: linux-dvb@linuxtv.org (subscription required)
+L: linux-dvb@linuxtv.org (subscription required)
W: http://linuxtv.org/
T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb.git
S: Maintained
P: Rik Faith
M: faith@cs.unc.edu
L: linux-scsi@vger.kernel.org
-S: Odd fixes (e.g., new signatures)
+S: Odd Fixes (e.g., new signatures)
GDT SCSI DISK ARRAY CONTROLLER DRIVER
P: Achim Leubner
HARDWARE MONITORING
L: lm-sensors@lm-sensors.org
W: http://www.lm-sensors.org/
-S: Orphaned
+S: Orphan
HARDWARE RANDOM NUMBER GENERATOR CORE
-S: Orphaned
+S: Orphan
HARD DRIVE ACTIVE PROTECTION SYSTEM (HDAPS) DRIVER
P: Robert Love
I2C/SMBUS STUB DRIVER
P: Mark M. Hoffman
M: mhoffman@lightlink.com
-L: lm-sensors@lm-sensors.org
+L: i2c@lm-sensors.org
S: Maintained
I2C SUBSYSTEM
P: Sean Hefty
M: sean.hefty@intel.com
P: Hal Rosenstock
-M: hal.rosenstock@gmail.com
+M: hal.rosenstock@gmail.com
L: general@lists.openfabrics.org
W: http://www.openib.org/
T: git kernel.org:/pub/scm/linux/kernel/git/roland/infiniband.git
MARVELL YUKON / SYSKONNECT DRIVER
P: Mirko Lindner
-M: mlindner@syskonnect.de
+M: mlindner@syskonnect.de
P: Ralph Roesler
-M: rroesler@syskonnect.de
-W: http://www.syskonnect.com
-S: Supported
+M: rroesler@syskonnect.de
+W: http://www.syskonnect.com
+S: Supported
MAN-PAGES: MANUAL PAGES FOR LINUX -- Sections 2, 3, 4, 5, and 7
P: Michael Kerrisk
M: mtk.manpages@gmail.com
-W: http://www.kernel.org/doc/man-pages
-S: Supported
+W: http://www.kernel.org/doc/man-pages
+S: Supported
MARVELL LIBERTAS WIRELESS DRIVER
P: Dan Williams
MEGARAID SCSI DRIVERS
P: Neela Syam Kolli
M: megaraidlinux@lsi.com
-S: linux-scsi@vger.kernel.org
+L: linux-scsi@vger.kernel.org
W: http://megaraid.lsilogic.com
S: Maintained
P: David Brownell
M: dbrownell@users.sourceforge.net
L: linux-kernel@vger.kernel.org
-S: Odd fixes
+S: Odd Fixes
MULTISOUND SOUND DRIVER
P: Andrew Veliath
S: Maintained
MUSB MULTIPOINT HIGH SPEED DUAL-ROLE CONTROLLER
-P: Felipe Balbi
-M: felipe.balbi@nokia.com
-L: linux-usb@vger.kernel.org
-S: Maintained
+P: Felipe Balbi
+M: felipe.balbi@nokia.com
+L: linux-usb@vger.kernel.org
+S: Maintained
MYRICOM MYRI-10G 10GbE DRIVER (MYRI10GE)
P: Andrew Gallatin
S: Supported
NATSEMI ETHERNET DRIVER (DP8381x)
-P: Tim Hockin
+P: Tim Hockin
M: thockin@hockin.org
S: Maintained
S: Maintained
OMNIVISION OV7670 SENSOR DRIVER
-P: Jonathan Corbet
+P: Jonathan Corbet
M: corbet@lwn.net
L: video4linux-list@redhat.com
S: Maintained
S: Supported
PCI HOTPLUG CORE
-P: Kristen Carlson Accardi
+P: Kristen Carlson Accardi
M: kristen.c.accardi@intel.com
S: Supported
P: Eric Paris
M: eparis@parisplace.org
L: linux-kernel@vger.kernel.org (kernel issues)
-L: selinux@tycho.nsa.gov (subscribers-only, general discussion)
+L: selinux@tycho.nsa.gov (subscribers-only, general discussion)
W: http://www.nsa.gov/selinux
S: Supported
SIS 96X I2C/SMBUS DRIVER
P: Mark M. Hoffman
M: mhoffman@lightlink.com
-L: lm-sensors@lm-sensors.org
+L: i2c@lm-sensors.org
S: Maintained
SIS FRAMEBUFFER DRIVER
S: Maintained
SOC-CAMERA V4L2 SUBSYSTEM
-P: Guennadi Liakhovetski
-M: g.liakhovetski@gmx.de
-L: video4linux-list@redhat.com
-S: Maintained
+P: Guennadi Liakhovetski
+M: g.liakhovetski@gmx.de
+L: video4linux-list@redhat.com
+S: Maintained
SOFTWARE RAID (Multiple Disks) SUPPORT
P: Ingo Molnar
SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT
P: Liam Girdwood
-M: liam.girdwood@wolfsonmicro.com
+M: lrg@slimlogic.co.uk
P: Mark Brown
M: broonie@opensource.wolfsonmicro.com
T: git opensource.wolfsonmicro.com/linux-2.6-asoc
L: alsa-devel@alsa-project.org (subscribers-only)
+W: http://alsa-project.org/main/index.php/ASoC
S: Supported
SPI SUBSYSTEM
STARMODE RADIO IP (STRIP) PROTOCOL DRIVER
W: http://mosquitonet.Stanford.EDU/strip.html
-S: Unsupported ?
+S: Orphan
STRADIS MPEG-2 DECODER DRIVER
P: Nathan Laredo
S: Maintained
TI FLASH MEDIA INTERFACE DRIVER
-P: Alex Dubov
-M: oakad@yahoo.com
-S: Maintained
+P: Alex Dubov
+M: oakad@yahoo.com
+S: Maintained
TI OMAP MMC INTERFACE DRIVER
P: Carlos Aguiar, Anderson Briglia and Syed Khasim
P: Pete Zaitcev
M: zaitcev@redhat.com
L: linux-kernel@vger.kernel.org
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
S: Supported
USB CDC ETHERNET DRIVER
P: Greg Kroah-Hartman
M: greg@kroah.com
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
S: Maintained
W: http://www.kroah.com/linux-usb/
USB EHCI DRIVER
P: David Brownell
M: dbrownell@users.sourceforge.net
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
S: Odd Fixes
USB ET61X[12]51 DRIVER
P: Luca Risolia
M: luca.risolia@studio.unibo.it
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
L: video4linux-list@redhat.com
W: http://www.linux-projects.org
S: Maintained
USB GADGET/PERIPHERAL SUBSYSTEM
P: David Brownell
M: dbrownell@users.sourceforge.net
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
W: http://www.linux-usb.org/gadget
S: Maintained
USB HID/HIDBP DRIVERS (USB KEYBOARDS, MICE, REMOTE CONTROLS, ...)
P: Jiri Kosina
M: jkosina@suse.cz
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
T: git kernel.org:/pub/scm/linux/kernel/git/jikos/hid.git
S: Maintained
USB ISP116X DRIVER
P: Olav Kongas
M: ok@artecdesign.ee
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
S: Maintained
USB KAWASAKI LSI DRIVER
P: Oliver Neukum
M: oliver@neukum.name
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
S: Maintained
USB MASS STORAGE DRIVER
P: Matthew Dharm
M: mdharm-usb@one-eyed-alien.net
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
L: usb-storage@lists.one-eyed-alien.net
S: Maintained
W: http://www.one-eyed-alien.net/~mdharm/linux-usb/
USB OHCI DRIVER
P: David Brownell
M: dbrownell@users.sourceforge.net
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
S: Odd Fixes
USB OPTION-CARD DRIVER
P: Matthias Urlichs
M: smurf@smurf.noris.de
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
S: Maintained
USB OV511 DRIVER
P: Mark McClelland
M: mmcclell@bigfoot.com
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
W: http://alpha.dyndns.org/ov511/
S: Maintained
USB PEGASUS DRIVER
P: Petko Manolov
M: petkan@users.sourceforge.net
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
L: netdev@vger.kernel.org
W: http://pegasus2.sourceforge.net/
S: Maintained
USB PRINTER DRIVER (usblp)
P: Pete Zaitcev
M: zaitcev@redhat.com
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
S: Supported
USB RTL8150 DRIVER
P: Petko Manolov
M: petkan@users.sourceforge.net
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
L: netdev@vger.kernel.org
W: http://pegasus2.sourceforge.net/
S: Maintained
USB SE401 DRIVER
P: Jeroen Vreeken
M: pe1rxq@amsat.org
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
W: http://www.chello.nl/~j.vreeken/se401/
S: Maintained
USB SERIAL BELKIN F5U103 DRIVER
P: William Greathouse
M: wgreathouse@smva.com
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
S: Maintained
USB SERIAL CYPRESS M8 DRIVER
P: Lonnie Mendez
M: dignome@gmail.com
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
S: Maintained
W: http://geocities.com/i0xox0i
W: http://firstlight.net/cvs
P: Peter Berger and Al Borchers
M: pberger@brimson.com
M: alborchers@steinerpoint.com
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
S: Maintained
USB SERIAL DRIVER
P: Greg Kroah-Hartman
M: gregkh@suse.de
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
S: Supported
USB SERIAL EMPEG EMPEG-CAR MARK I/II DRIVER
P: Gary Brubaker
M: xavyer@ix.netcom.com
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
S: Maintained
USB SERIAL KEYSPAN DRIVER
P: Greg Kroah-Hartman
M: greg@kroah.com
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
W: http://www.kroah.com/linux/
S: Maintained
USB SERIAL WHITEHEAT DRIVER
P: Support Department
M: support@connecttech.com
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
W: http://www.connecttech.com
S: Supported
USB SN9C1xx DRIVER
P: Luca Risolia
M: luca.risolia@studio.unibo.it
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
L: video4linux-list@redhat.com
W: http://www.linux-projects.org
S: Maintained
USB SUBSYSTEM
P: Greg Kroah-Hartman
M: gregkh@suse.de
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
W: http://www.linux-usb.org
T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
S: Supported
USB UHCI DRIVER
P: Alan Stern
M: stern@rowland.harvard.edu
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
S: Maintained
USB "USBNET" DRIVER FRAMEWORK
USB VIDEO CLASS
P: Laurent Pinchart
M: laurent.pinchart@skynet.be
-L: linx-uvc-devel@berlios.de
+L: linux-uvc-devel@lists.berlios.de
L: video4linux-list@redhat.com
W: http://linux-uvc.berlios.de
S: Maintained
USB W996[87]CF DRIVER
P: Luca Risolia
M: luca.risolia@studio.unibo.it
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
L: video4linux-list@redhat.com
W: http://www.linux-projects.org
S: Maintained
USB ZC0301 DRIVER
P: Luca Risolia
M: luca.risolia@studio.unibo.it
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
L: video4linux-list@redhat.com
W: http://www.linux-projects.org
S: Maintained
USB ZD1201 DRIVER
P: Jeroen Vreeken
M: pe1rxq@amsat.org
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
W: http://linux-lc100020.sourceforge.net
S: Maintained
USB ZR364XX DRIVER
P: Antoine Jacquet
M: royale@zerezo.com
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
L: video4linux-list@redhat.com
W: http://royale.zerezo.com/zr364xx/
S: Maintained
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 27
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc7
NAME = Rotary Wombat
# *DOCUMENTATION*
* The networking and block device layers use this boolean for bounce
* buffer decisions.
*/
-#define PCI_DMA_BUS_IS_PHYS (0)
+#define PCI_DMA_BUS_IS_PHYS (1)
/*
* Whether pci_unmap_{single,page} is a nop depends upon the
{
u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl, mdstat_mask;
- if (id < 0)
- return;
-
mdctl = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + MDCTL + 4 * id);
if (enable)
mdctl |= 0x00000003; /* Enable Module */
};
static struct imxuart_platform_data uart_pdata = {
- .flags = 0,
+ .flags = IMXUART_HAVE_RTSCTS,
};
static struct platform_device *devices[] __initdata = {
#include <linux/interrupt.h>
#include <linux/clockchips.h>
#include <linux/sched.h>
+#include <linux/cnt32_to_63.h>
#include <asm/div64.h>
-#include <asm/cnt32_to_63.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
#include <mach/pxa-regs.h>
#include <asm/mach/sharpsl_param.h>
#include "generic.h"
+#include "clock.h"
#include "devices.h"
static unsigned long tosa_pin_config[] = {
.wakeup = 1,
.active_low = 1,
},
+ {
+ .type = EV_SW,
+ .code = SW_HEADPHONE_INSERT,
+ .gpio = TOSA_GPIO_EAR_IN,
+ .desc = "HeadPhone insert",
+ .active_low = 1,
+ .debounce_interval = 300,
+ },
};
static struct gpio_keys_platform_data tosa_gpio_keys_platform_data = {
pxa_set_i2c_info(NULL);
platform_scoop_config = &tosa_pcmcia_config;
+ clk_add_alias("CLK_CK3P6MI", &tc6393xb_device.dev, "GPIO11_CLK", NULL);
+
platform_add_devices(devices, ARRAY_SIZE(devices));
}
#include <linux/ioport.h>
#include <linux/sched.h> /* just for sched_clock() - funny that */
#include <linux/platform_device.h>
+#include <linux/cnt32_to_63.h>
#include <asm/div64.h>
-#include <asm/cnt32_to_63.h>
#include <mach/hardware.h>
#include <asm/system.h>
#include <asm/pgtable.h>
/*
* arch/arm/mach-sa1100/include/mach/jornada720.h
*
- * This file contains SSP/MCU communication definitions for HP Jornada 710/720/728
+ * SSP/MCU communication definitions for HP Jornada 710/720/728
*
- * Copyright (C) 2007 Kristoffer Ericson <Kristoffer.Ericson@gmail.com>
- * Copyright (C) 2000 John Ankcorn <jca@lcs.mit.edu>
+ * Copyright 2007,2008 Kristoffer Ericson <Kristoffer.Ericson@gmail.com>
+ * Copyright 2000 John Ankcorn <jca@lcs.mit.edu>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
#define PWMOFF 0xDF
#define TXDUMMY 0x11
#define ERRORCODE 0x00
+
+extern void jornada_ssp_start(void);
+extern void jornada_ssp_end(void);
+extern int jornada_ssp_inout(u8 byte);
+extern int jornada_ssp_byte(u8 byte);
#include <linux/slab.h>
#include <mach/hardware.h>
-#include <asm/hardware/ssp.h>
#include <mach/jornada720.h>
+#include <asm/hardware/ssp.h>
static DEFINE_SPINLOCK(jornada_ssp_lock);
static unsigned long jornada_ssp_flags;
* jornada_ssp_start - enable mcu
*
*/
-int jornada_ssp_start()
+void jornada_ssp_start(void)
{
spin_lock_irqsave(&jornada_ssp_lock, jornada_ssp_flags);
GPCR = GPIO_GPIO25;
udelay(50);
- return 0;
+ return;
};
EXPORT_SYMBOL(jornada_ssp_start);
* jornada_ssp_end - disable mcu and turn off lock
*
*/
-int jornada_ssp_end()
+void jornada_ssp_end(void)
{
GPSR = GPIO_GPIO25;
spin_unlock_irqrestore(&jornada_ssp_lock, jornada_ssp_flags);
- return 0;
+ return;
};
EXPORT_SYMBOL(jornada_ssp_end);
#include <linux/amba/clcd.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
+#include <linux/cnt32_to_63.h>
-#include <asm/cnt32_to_63.h>
#include <asm/system.h>
#include <mach/hardware.h>
#include <asm/io.h>
#include <mach/tc.h>
#include <mach/board.h>
+#include <mach/mmc.h>
#include <mach/mux.h>
#include <mach/gpio.h>
#include <mach/menelaus.h>
/*-------------------------------------------------------------------------*/
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
+ defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
-#ifdef CONFIG_ARCH_OMAP24XX
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
#define OMAP_MMC1_BASE 0x4809c000
-#define OMAP_MMC1_INT INT_24XX_MMC_IRQ
+#define OMAP_MMC1_END (OMAP_MMC1_BASE + 0x1fc)
+#define OMAP_MMC1_INT INT_24XX_MMC_IRQ
+
+#define OMAP_MMC2_BASE 0x480b4000
+#define OMAP_MMC2_END (OMAP_MMC2_BASE + 0x1fc)
+#define OMAP_MMC2_INT INT_24XX_MMC2_IRQ
+
#else
+
#define OMAP_MMC1_BASE 0xfffb7800
+#define OMAP_MMC1_END (OMAP_MMC1_BASE + 0x7f)
#define OMAP_MMC1_INT INT_MMC
-#endif
+
#define OMAP_MMC2_BASE 0xfffb7c00 /* omap16xx only */
+#define OMAP_MMC2_END (OMAP_MMC2_BASE + 0x7f)
+#define OMAP_MMC2_INT INT_1610_MMC2
+
+#endif
-static struct omap_mmc_conf mmc1_conf;
+static struct omap_mmc_platform_data mmc1_data;
static u64 mmc1_dmamask = 0xffffffff;
static struct resource mmc1_resources[] = {
{
.start = OMAP_MMC1_BASE,
- .end = OMAP_MMC1_BASE + 0x7f,
+ .end = OMAP_MMC1_END,
.flags = IORESOURCE_MEM,
},
{
.id = 1,
.dev = {
.dma_mask = &mmc1_dmamask,
- .platform_data = &mmc1_conf,
+ .platform_data = &mmc1_data,
},
.num_resources = ARRAY_SIZE(mmc1_resources),
.resource = mmc1_resources,
};
-#ifdef CONFIG_ARCH_OMAP16XX
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2430) || \
+ defined(CONFIG_ARCH_OMAP34XX)
-static struct omap_mmc_conf mmc2_conf;
+static struct omap_mmc_platform_data mmc2_data;
static u64 mmc2_dmamask = 0xffffffff;
static struct resource mmc2_resources[] = {
{
.start = OMAP_MMC2_BASE,
- .end = OMAP_MMC2_BASE + 0x7f,
+ .end = OMAP_MMC2_END,
.flags = IORESOURCE_MEM,
},
{
- .start = INT_1610_MMC2,
+ .start = OMAP_MMC2_INT,
.flags = IORESOURCE_IRQ,
},
};
.id = 2,
.dev = {
.dma_mask = &mmc2_dmamask,
- .platform_data = &mmc2_conf,
+ .platform_data = &mmc2_data,
},
.num_resources = ARRAY_SIZE(mmc2_resources),
.resource = mmc2_resources,
};
#endif
-static void __init omap_init_mmc(void)
+static inline void omap_init_mmc_conf(const struct omap_mmc_config *mmc_conf)
{
- const struct omap_mmc_config *mmc_conf;
- const struct omap_mmc_conf *mmc;
-
- /* NOTE: assumes MMC was never (wrongly) enabled */
- mmc_conf = omap_get_config(OMAP_TAG_MMC, struct omap_mmc_config);
- if (!mmc_conf)
+ if (cpu_is_omap2430() || cpu_is_omap34xx())
return;
- /* block 1 is always available and has just one pinout option */
- mmc = &mmc_conf->mmc[0];
- if (mmc->enabled) {
+ if (mmc_conf->mmc[0].enabled) {
if (cpu_is_omap24xx()) {
omap_cfg_reg(H18_24XX_MMC_CMD);
omap_cfg_reg(H15_24XX_MMC_CLKI);
omap_cfg_reg(P20_1710_MMC_DATDIR0);
}
}
- if (mmc->wire4) {
+ if (mmc_conf->mmc[0].wire4) {
if (cpu_is_omap24xx()) {
omap_cfg_reg(H14_24XX_MMC_DAT1);
omap_cfg_reg(E19_24XX_MMC_DAT2);
} else {
omap_cfg_reg(MMC_DAT1);
/* NOTE: DAT2 can be on W10 (here) or M15 */
- if (!mmc->nomux)
+ if (!mmc_conf->mmc[0].nomux)
omap_cfg_reg(MMC_DAT2);
omap_cfg_reg(MMC_DAT3);
}
}
- mmc1_conf = *mmc;
- (void) platform_device_register(&mmc_omap_device1);
}
#ifdef CONFIG_ARCH_OMAP16XX
/* block 2 is on newer chips, and has many pinout options */
- mmc = &mmc_conf->mmc[1];
- if (mmc->enabled) {
- if (!mmc->nomux) {
+ if (mmc_conf->mmc[1].enabled) {
+ if (!mmc_conf->mmc[1].nomux) {
omap_cfg_reg(Y8_1610_MMC2_CMD);
omap_cfg_reg(Y10_1610_MMC2_CLK);
omap_cfg_reg(R18_1610_MMC2_CLKIN);
omap_cfg_reg(W8_1610_MMC2_DAT0);
- if (mmc->wire4) {
+ if (mmc_conf->mmc[1].wire4) {
omap_cfg_reg(V8_1610_MMC2_DAT1);
omap_cfg_reg(W15_1610_MMC2_DAT2);
omap_cfg_reg(R10_1610_MMC2_DAT3);
if (cpu_is_omap1710())
omap_writel(omap_readl(MOD_CONF_CTRL_1) | (1 << 24),
MOD_CONF_CTRL_1);
- mmc2_conf = *mmc;
+ }
+#endif
+}
+
+static void __init omap_init_mmc(void)
+{
+ const struct omap_mmc_config *mmc_conf;
+
+ /* NOTE: assumes MMC was never (wrongly) enabled */
+ mmc_conf = omap_get_config(OMAP_TAG_MMC, struct omap_mmc_config);
+ if (!mmc_conf)
+ return;
+
+ omap_init_mmc_conf(mmc_conf);
+
+ if (mmc_conf->mmc[0].enabled) {
+ mmc1_data.conf = mmc_conf->mmc[0];
+ (void) platform_device_register(&mmc_omap_device1);
+ }
+
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2430) || \
+ defined(CONFIG_ARCH_OMAP34XX)
+ if (mmc_conf->mmc[1].enabled) {
+ mmc2_data.conf = mmc_conf->mmc[1];
(void) platform_device_register(&mmc_omap_device2);
}
#endif
- return;
}
+
+void omap_set_mmc_info(int host, const struct omap_mmc_platform_data *info)
+{
+ switch (host) {
+ case 1:
+ mmc1_data = *info;
+ break;
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2430) || \
+ defined(CONFIG_ARCH_OMAP34XX)
+ case 2:
+ mmc2_data = *info;
+ break;
+#endif
+ default:
+ BUG();
+ }
+}
+
#else
static inline void omap_init_mmc(void) {}
+void omap_set_mmc_info(int host, const struct omap_mmc_platform_data *info) {}
#endif
/*-------------------------------------------------------------------------*/
#ifdef CONFIG_BOARD_ATSTK100X_SPI1
at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
#endif
-#ifndef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
+#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
at32_add_device_mci(0, MCI_PDATA);
#endif
#ifdef CONFIG_BOARD_ATSTK1002_SW5_CUSTOM
--- /dev/null
+uImage
+uImage.srec
+vmlinux.cso
+sfdwarf.log
--- /dev/null
+vmlinux.lds
EXPORT_SYMBOL(find_next_zero_bit);
EXPORT_SYMBOL(find_first_bit);
EXPORT_SYMBOL(find_next_bit);
+EXPORT_SYMBOL(generic_find_next_le_bit);
EXPORT_SYMBOL(generic_find_next_zero_le_bit);
/* I/O primitives (lib/io-*.S) */
rcall sys_epoll_pwait
sub sp, -4
popm pc
+
+ .global __sys_sync_file_range
+ .type __sys_sync_file_range,@function
+__sys_sync_file_range:
+ pushm lr
+ st.w --sp, ARG6
+ rcall sys_sync_file_range
+ sub sp, -4
+ popm pc
.long sys_set_robust_list
.long sys_get_robust_list /* 260 */
.long __sys_splice
- .long sys_sync_file_range
+ .long __sys_sync_file_range
.long sys_tee
.long sys_vmsplice
.long __sys_epoll_pwait /* 265 */
switch (ret) {
case NOTIFY_OK:
case NOTIFY_STOP:
- return;
+ break;
case NOTIFY_BAD:
die("Fatal Non-Maskable Interrupt", regs, SIGINT);
default:
+ printk(KERN_ALERT "Got NMI, but nobody cared. Disabling...\n");
+ nmi_disable();
break;
}
-
- printk(KERN_ALERT "Got NMI, but nobody cared. Disabling...\n");
- nmi_disable();
+ nmi_exit();
}
asmlinkage void do_critical_exception(unsigned long ecr, struct pt_regs *regs)
brgt 1b
retal r11
+ENTRY(generic_find_next_le_bit)
+ lsr r8, r10, 5
+ sub r9, r11, r10
+ retle r11
+
+ lsl r8, 2
+ add r12, r8
+ andl r10, 31, COH
+ breq 1f
+
+ /* offset is not word-aligned. Handle the first (32 - r10) bits */
+ ldswp.w r8, r12[0]
+ sub r12, -4
+ lsr r8, r8, r10
+ brne .L_found
+
+ /* r9 = r9 - (32 - r10) = r9 + r10 - 32 */
+ add r9, r10
+ sub r9, 32
+ retle r11
+
+ /* Main loop. offset must be word-aligned */
+1: ldswp.w r8, r12[0]
+ cp.w r8, 0
+ brne .L_found
+ sub r12, -4
+ sub r9, 32
+ brgt 1b
+ retal r11
+
ENTRY(generic_find_next_zero_le_bit)
lsr r8, r10, 5
sub r9, r11, r10
if (md->attribute & EFI_MEMORY_WP) {
name = "System ROM";
flags |= IORESOURCE_READONLY;
- } else {
+ } else if (md->attribute == EFI_MEMORY_UC)
+ name = "Uncached RAM";
+ else
name = "System RAM";
- }
break;
case EFI_ACPI_MEMORY_NVS:
ia64_mca_init();
platform_setup(cmdline_p);
+#ifndef CONFIG_IA64_HP_SIM
check_sal_cache_flush();
+#endif
paging_init();
}
#include <asm/cacheflush.h>
#include <asm/div64.h>
#include <asm/tlb.h>
+#include <asm/elf.h>
#include "misc.h"
#include "vti.h"
{ NULL }
};
-
-struct fdesc{
- unsigned long ip;
- unsigned long gp;
-};
-
static void kvm_flush_icache(unsigned long start, unsigned long len)
{
int l;
static int au1xxx_gpio2_direction_output(unsigned gpio, int value)
{
gpio -= AU1XXX_GPIO_BASE;
- gpio2->dir = (0x01 << gpio) | (value << gpio);
+ gpio2->dir |= 0x01 << gpio;
+ gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | (value << gpio);
return 0;
}
static int au1xxx_gpio1_direction_output(unsigned gpio, int value)
{
gpio1->trioutclr = (0x01 & gpio);
+ au1xxx_gpio1_write(gpio, value);
return 0;
}
local_irq_enable();
}
-/*
- * There is a race when WAIT instruction executed with interrupt
- * enabled.
- * But it is implementation-dependent wheter the pipelie restarts when
- * a non-enabled interrupt is requested.
- */
-static void r4k_wait(void)
-{
- __asm__(" .set mips3 \n"
- " wait \n"
- " .set mips0 \n");
-}
+extern void r4k_wait(void);
/*
* This variant is preferable as it allows testing need_resched and going to
__setup("nowait", wait_disable);
-static inline void check_wait(void)
+void __init check_wait(void)
{
struct cpuinfo_mips *c = ¤t_cpu_data;
void __init check_bugs32(void)
{
- check_wait();
check_errata();
}
#include <asm/stackframe.h>
#include <asm/war.h>
#include <asm/page.h>
+#include <asm/thread_info.h>
#define PANIC_PIC(msg) \
.set push; \
__FINIT
+ .align 5 /* 32 byte rollback region */
+LEAF(r4k_wait)
+ .set push
+ .set noreorder
+ /* start of rollback region */
+ LONG_L t0, TI_FLAGS($28)
+ nop
+ andi t0, _TIF_NEED_RESCHED
+ bnez t0, 1f
+ nop
+ nop
+ nop
+ .set mips3
+ wait
+ /* end of rollback region (the region size must be power of two) */
+ .set pop
+1:
+ jr ra
+ END(r4k_wait)
+
+ .macro BUILD_ROLLBACK_PROLOGUE handler
+ FEXPORT(rollback_\handler)
+ .set push
+ .set noat
+ MFC0 k0, CP0_EPC
+ PTR_LA k1, r4k_wait
+ ori k0, 0x1f /* 32 byte rollback region */
+ xori k0, 0x1f
+ bne k0, k1, 9f
+ MTC0 k0, CP0_EPC
+9:
+ .set pop
+ .endm
+
.align 5
+BUILD_ROLLBACK_PROLOGUE handle_int
NESTED(handle_int, PT_SIZE, sp)
#ifdef CONFIG_TRACE_IRQFLAGS
/*
* This prototype is copied to ebase + n*IntCtl.VS and patched
* to invoke the handler
*/
+BUILD_ROLLBACK_PROLOGUE except_vec_vi
NESTED(except_vec_vi, 0, sp)
SAVE_SOME
SAVE_AT
clear_tsk_thread_flag(p, TIF_USEDFPU);
#ifdef CONFIG_MIPS_MT_FPAFF
+ clear_tsk_thread_flag(p, TIF_FPUBOUND);
+
/*
* FPU affinity support is cleaner if we track the
* user-visible CPU affinity from the very beginning.
#include <asm/types.h>
#include <asm/stacktrace.h>
+extern void check_wait(void);
+extern asmlinkage void r4k_wait(void);
+extern asmlinkage void rollback_handle_int(void);
extern asmlinkage void handle_int(void);
extern asmlinkage void handle_tlbm(void);
extern asmlinkage void handle_tlbl(void);
extern char except_vec_vi, except_vec_vi_lui;
extern char except_vec_vi_ori, except_vec_vi_end;
+ extern char rollback_except_vec_vi;
+ char *vec_start = (cpu_wait == r4k_wait) ?
+ &rollback_except_vec_vi : &except_vec_vi;
#ifdef CONFIG_MIPS_MT_SMTC
/*
* We need to provide the SMTC vectored interrupt handler
* Status.IM bit to be masked before going there.
*/
extern char except_vec_vi_mori;
- const int mori_offset = &except_vec_vi_mori - &except_vec_vi;
+ const int mori_offset = &except_vec_vi_mori - vec_start;
#endif /* CONFIG_MIPS_MT_SMTC */
- const int handler_len = &except_vec_vi_end - &except_vec_vi;
- const int lui_offset = &except_vec_vi_lui - &except_vec_vi;
- const int ori_offset = &except_vec_vi_ori - &except_vec_vi;
+ const int handler_len = &except_vec_vi_end - vec_start;
+ const int lui_offset = &except_vec_vi_lui - vec_start;
+ const int ori_offset = &except_vec_vi_ori - vec_start;
if (handler_len > VECTORSPACING) {
/*
panic("VECTORSPACING too small");
}
- memcpy(b, &except_vec_vi, handler_len);
+ memcpy(b, vec_start, handler_len);
#ifdef CONFIG_MIPS_MT_SMTC
BUG_ON(n > 7); /* Vector index %d exceeds SMTC maximum. */
extern char except_vec3_generic, except_vec3_r4000;
extern char except_vec4;
unsigned long i;
+ int rollback;
+
+ check_wait();
+ rollback = (cpu_wait == r4k_wait);
#if defined(CONFIG_KGDB)
if (kgdb_early_setup)
if (board_be_init)
board_be_init();
- set_except_vector(0, handle_int);
+ set_except_vector(0, rollback ? rollback_handle_int : handle_int);
set_except_vector(1, handle_tlbm);
set_except_vector(2, handle_tlbl);
set_except_vector(3, handle_tlbs);
SCHED_TEXT
LOCK_TEXT
KPROBES_TEXT
+ *(.text.*)
*(.fixup)
*(.gnu.warning)
} :text = 0
#ifdef USE_DOUBLE
#define LOAD ld
+#define LOAD32 lwu
#define ADD daddu
#define NBYTES 8
#else
#define LOAD lw
+#define LOAD32 lw
#define ADD addu
#define NBYTES 4
ADD sum, v1; \
.set pop
+#define ADDC32(sum,reg) \
+ .set push; \
+ .set noat; \
+ addu sum, reg; \
+ sltu v1, sum, reg; \
+ addu sum, v1; \
+ .set pop
+
#define CSUM_BIGCHUNK1(src, offset, sum, _t0, _t1, _t2, _t3) \
LOAD _t0, (offset + UNIT(0))(src); \
LOAD _t1, (offset + UNIT(1))(src); \
beqz t8, .Lqword_align
andi t8, src, 0x8
- lw t0, 0x00(src)
+ LOAD32 t0, 0x00(src)
LONG_SUBU a1, a1, 0x4
ADDC(sum, t0)
PTR_ADDU src, src, 0x4
LONG_SRL t8, t8, 0x2
.Lend_words:
- lw t0, (src)
+ LOAD32 t0, (src)
LONG_SUBU t8, t8, 0x1
ADDC(sum, t0)
.set reorder /* DADDI_WAR */
/* Still a full word to go */
ulw t1, (src)
PTR_ADDIU src, 4
+#ifdef USE_DOUBLE
+ dsll t1, t1, 32 /* clear lower 32bit */
+#endif
ADDC(sum, t1)
1: move t1, zero
1:
.set reorder
/* Add the passed partial csum. */
- ADDC(sum, a2)
+ ADDC32(sum, a2)
jr ra
.set noreorder
END(csum_partial)
.set pop
1:
.set reorder
- ADDC(sum, psum)
+ ADDC32(sum, psum)
jr ra
.set noreorder
cascade = irq_cascade + irq;
if (cascade->get_irq != NULL) {
unsigned int source_irq = irq;
+ int ret;
desc = irq_desc + source_irq;
if (desc->chip->mask_ack)
desc->chip->mask_ack(source_irq);
desc->chip->mask(source_irq);
desc->chip->ack(source_irq);
}
- irq = cascade->get_irq(irq);
- if (irq < 0)
+ ret = cascade->get_irq(irq);
+ irq = ret;
+ if (ret < 0)
atomic_inc(&irq_err_count);
else
irq_dispatch(irq);
/* MN10300 Low level time management
*
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Copyright (C) 2007-2008 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
* - Derived from arch/i386/kernel/time.c
*
#include <linux/init.h>
#include <linux/smp.h>
#include <linux/profile.h>
+#include <linux/cnt32_to_63.h>
#include <asm/irq.h>
#include <asm/div64.h>
#include <asm/processor.h>
.name = "timer",
};
+static unsigned long sched_clock_multiplier;
+
/*
* scheduler clock - returns current time in nanosec units.
*/
unsigned long long sched_clock(void)
{
union {
- unsigned long long l;
- u32 w[2];
- } quot;
+ unsigned long long ll;
+ unsigned l[2];
+ } tsc64, result;
+ unsigned long tsc, tmp;
+ unsigned product[3]; /* 96-bit intermediate value */
+
+ /* read the TSC value
+ */
+ tsc = 0 - get_cycles(); /* get_cycles() counts down */
- quot.w[0] = mn10300_last_tsc - get_cycles();
- quot.w[1] = 1000000000;
+ /* expand to 64-bits.
+ * - sched_clock() must be called once a minute or better or the
+ * following will go horribly wrong - see cnt32_to_63()
+ */
+ tsc64.ll = cnt32_to_63(tsc) & 0x7fffffffffffffffULL;
- asm("mulu %2,%3,%0,%1"
- : "=r"(quot.w[1]), "=r"(quot.w[0])
- : "0"(quot.w[1]), "1"(quot.w[0])
+ /* scale the 64-bit TSC value to a nanosecond value via a 96-bit
+ * intermediate
+ */
+ asm("mulu %2,%0,%3,%0 \n" /* LSW * mult -> 0:%3:%0 */
+ "mulu %2,%1,%2,%1 \n" /* MSW * mult -> %2:%1:0 */
+ "add %3,%1 \n"
+ "addc 0,%2 \n" /* result in %2:%1:%0 */
+ : "=r"(product[0]), "=r"(product[1]), "=r"(product[2]), "=r"(tmp)
+ : "0"(tsc64.l[0]), "1"(tsc64.l[1]), "2"(sched_clock_multiplier)
: "cc");
- do_div(quot.l, MN10300_TSCCLK);
+ result.l[0] = product[1] << 16 | product[0] >> 16;
+ result.l[1] = product[2] << 16 | product[1] >> 16;
- return quot.l;
+ return result.ll;
+}
+
+/*
+ * initialise the scheduler clock
+ */
+static void __init mn10300_sched_clock_init(void)
+{
+ sched_clock_multiplier =
+ __muldiv64u(NSEC_PER_SEC, 1 << 16, MN10300_TSCCLK);
}
/*
/* start the watchdog timer */
watchdog_go();
#endif
+
+ mn10300_sched_clock_init();
}
image-$(CONFIG_PPC_CHRP) += zImage.chrp
image-$(CONFIG_PPC_EFIKA) += zImage.chrp
image-$(CONFIG_PPC_PMAC) += zImage.pmac
-image-$(CONFIG_PPC_HOLLY) += zImage.holly
+image-$(CONFIG_PPC_HOLLY) += dtbImage.holly
image-$(CONFIG_PPC_PRPMC2800) += dtbImage.prpmc2800
image-$(CONFIG_PPC_ISERIES) += zImage.iseries
image-$(CONFIG_DEFAULT_UIMAGE) += uImage
cell-index = <0>;
reg = <0x0 0x80>;
interrupt-parent = <&mpic>;
- interrupts = <60 2>;
+ interrupts = <76 2>;
};
dma-channel@1 {
compatible = "fsl,mpc8610-dma-channel",
cell-index = <1>;
reg = <0x80 0x80>;
interrupt-parent = <&mpic>;
- interrupts = <61 2>;
+ interrupts = <77 2>;
};
dma-channel@2 {
compatible = "fsl,mpc8610-dma-channel",
cell-index = <2>;
reg = <0x100 0x80>;
interrupt-parent = <&mpic>;
- interrupts = <62 2>;
+ interrupts = <78 2>;
};
dma-channel@3 {
compatible = "fsl,mpc8610-dma-channel",
cell-index = <3>;
reg = <0x180 0x80>;
interrupt-parent = <&mpic>;
- interrupts = <63 2>;
+ interrupts = <79 2>;
};
};
/* Keep this the last entry. */
#define R_PPC64_NUM 107
+/* There's actually a third entry here, but it's unused */
+struct ppc64_opd_entry
+{
+ unsigned long funcaddr;
+ unsigned long r2;
+};
+
#ifdef __KERNEL__
#ifdef CONFIG_SPU_BASE
#define _ASM_POWERPC_SECTIONS_H
#ifdef __KERNEL__
+#include <linux/elf.h>
+#include <linux/uaccess.h>
#include <asm-generic/sections.h>
#ifdef __powerpc64__
}
#undef dereference_function_descriptor
-void *dereference_function_descriptor(void *);
+static inline void *dereference_function_descriptor(void *ptr)
+{
+ struct ppc64_opd_entry *desc = ptr;
+ void *p;
+
+ if (!probe_kernel_address(&desc->funcaddr, p))
+ ptr = p;
+ return ptr;
+}
#endif
#include <linux/err.h>
#include <linux/vmalloc.h>
#include <linux/bug.h>
-#include <linux/uaccess.h>
#include <asm/module.h>
-#include <asm/sections.h>
#include <asm/firmware.h>
#include <asm/code-patching.h>
#include <linux/sort.h>
#define DEBUGP(fmt , ...)
#endif
-/* There's actually a third entry here, but it's unused */
-struct ppc64_opd_entry
-{
- unsigned long funcaddr;
- unsigned long r2;
-};
-
/* Like PPC32, we need little trampolines to do > 24-bit jumps (into
the kernel itself). But on PPC64, these need to be used for every
jump, actually, to reset r2 (TOC+0x8000). */
return 0;
}
-
-void *dereference_function_descriptor(void *ptr)
-{
- struct ppc64_opd_entry *desc = ptr;
- void *p;
-
- if (!probe_kernel_address(&desc->funcaddr, p))
- ptr = p;
- return ptr;
-}
return of_bus_default_map(addr, range, na, ns, pna);
}
-static unsigned int of_bus_sbus_get_flags(const u32 *addr)
+static unsigned long of_bus_sbus_get_flags(const u32 *addr, unsigned long flags)
{
return IORESOURCE_MEM;
}
*/
[REGSET_GENERAL] = {
.core_note_type = NT_PRSTATUS,
- .n = 38 * sizeof(u32),
+ .n = 38,
.size = sizeof(u32), .align = sizeof(u32),
.get = genregs32_get, .set = genregs32_set
},
*/
[REGSET_FP] = {
.core_note_type = NT_PRFPREG,
- .n = 99 * sizeof(u32),
+ .n = 99,
.size = sizeof(u32), .align = sizeof(u32),
.get = fpregs32_get, .set = fpregs32_set
},
#include <linux/module.h>
#include <linux/sched.h>
+#include <linux/linkage.h>
#include <linux/ptrace.h>
#include <linux/errno.h>
#include <linux/kernel_stat.h>
: "g1", "g2");
}
-void init_irqwork_curcpu(void)
+void notrace init_irqwork_curcpu(void)
{
int cpu = hard_smp_processor_id();
}
}
-void __cpuinit sun4v_register_mondo_queues(int this_cpu)
+void __cpuinit notrace sun4v_register_mondo_queues(int this_cpu)
{
struct trap_per_cpu *tb = &trap_block[this_cpu];
static int of_bus_pci_match(struct device_node *np)
{
- if (!strcmp(np->type, "pci") || !strcmp(np->type, "pciex")) {
+ if (!strcmp(np->name, "pci")) {
const char *model = of_get_property(np, "model", NULL);
if (model && !strcmp(model, "SUNW,simba"))
/* Treat PCI busses lacking ranges property just like
* simba.
*/
- if (!strcmp(np->type, "pci") || !strcmp(np->type, "pciex")) {
+ if (!strcmp(np->name, "pci")) {
if (!of_find_property(np, "ranges", NULL))
return 1;
}
* it lacks a ranges property, and this will include
* cases like Simba.
*/
- if (!strcmp(pp->type, "pci") || !strcmp(pp->type, "pciex"))
+ if (!strcmp(pp->name, "pci"))
return 0;
return 1;
break;
}
} else {
- if (!strcmp(pp->type, "pci") ||
- !strcmp(pp->type, "pciex")) {
+ if (!strcmp(pp->name, "pci")) {
unsigned int this_orig_irq = irq;
irq = pci_irq_swizzle(dp, pp, irq);
dev->current_state = 4; /* unknown power state */
dev->error_state = pci_channel_io_normal;
- if (!strcmp(type, "pci") || !strcmp(type, "pciex")) {
+ if (!strcmp(node->name, "pci")) {
/* a PCI-PCI bridge */
dev->hdr_type = PCI_HEADER_TYPE_BRIDGE;
dev->rom_base_reg = PCI_ROM_ADDRESS1;
{
unsigned long csr_reg, csr, csr_error_bits;
irqreturn_t ret = IRQ_NONE;
- u16 stat;
+ u16 stat, *addr;
if (is_pbm_a) {
csr_reg = pbm->controller_regs + PSYCHO_PCIA_CTRL;
printk("%s: PCI SERR signal asserted.\n", pbm->name);
ret = IRQ_HANDLED;
}
- pci_read_config_word(pbm->pci_bus->self, PCI_STATUS, &stat);
+ addr = psycho_pci_config_mkaddr(pbm, pbm->pci_first_busno,
+ 0, PCI_STATUS);
+ pci_config_read16(addr, &stat);
if (stat & (PCI_STATUS_PARITY |
PCI_STATUS_SIG_TARGET_ABORT |
PCI_STATUS_REC_TARGET_ABORT |
PCI_STATUS_SIG_SYSTEM_ERROR)) {
printk("%s: PCI bus error, PCI_STATUS[%04x]\n",
pbm->name, stat);
- pci_write_config_word(pbm->pci_bus->self, PCI_STATUS, 0xffff);
+ pci_config_write16(addr, 0xffff);
ret = IRQ_HANDLED;
}
return ret;
* the second will just error out since we do not pass in
* IRQF_SHARED.
*/
- err = request_irq(op->irqs[1], psycho_ue_intr, 0,
+ err = request_irq(op->irqs[1], psycho_ue_intr, IRQF_SHARED,
"PSYCHO_UE", pbm);
- err = request_irq(op->irqs[2], psycho_ce_intr, 0,
+ err = request_irq(op->irqs[2], psycho_ce_intr, IRQF_SHARED,
"PSYCHO_CE", pbm);
/* This one, however, ought not to fail. We can just warn
* about it since the system can still operate properly even
* if this fails.
*/
- err = request_irq(op->irqs[0], psycho_pcierr_intr, 0,
+ err = request_irq(op->irqs[0], psycho_pcierr_intr, IRQF_SHARED,
"PSYCHO_PCIERR", pbm);
if (err)
printk(KERN_WARNING "%s: Could not register PCIERR, "
return PSYCHO_IMAP_B_SLOT0 + (slot * 8);
}
-#define PSYCHO_IMAP_SCSI 0x1000UL
-#define PSYCHO_IMAP_ETH 0x1008UL
-#define PSYCHO_IMAP_BPP 0x1010UL
-#define PSYCHO_IMAP_AU_REC 0x1018UL
-#define PSYCHO_IMAP_AU_PLAY 0x1020UL
-#define PSYCHO_IMAP_PFAIL 0x1028UL
-#define PSYCHO_IMAP_KMS 0x1030UL
-#define PSYCHO_IMAP_FLPY 0x1038UL
-#define PSYCHO_IMAP_SHW 0x1040UL
-#define PSYCHO_IMAP_KBD 0x1048UL
-#define PSYCHO_IMAP_MS 0x1050UL
-#define PSYCHO_IMAP_SER 0x1058UL
-#define PSYCHO_IMAP_TIM0 0x1060UL
-#define PSYCHO_IMAP_TIM1 0x1068UL
-#define PSYCHO_IMAP_UE 0x1070UL
-#define PSYCHO_IMAP_CE 0x1078UL
-#define PSYCHO_IMAP_A_ERR 0x1080UL
-#define PSYCHO_IMAP_B_ERR 0x1088UL
-#define PSYCHO_IMAP_PMGMT 0x1090UL
-#define PSYCHO_IMAP_GFX 0x1098UL
-#define PSYCHO_IMAP_EUPA 0x10a0UL
-
-static unsigned long __psycho_onboard_imap_off[] = {
-/*0x20*/ PSYCHO_IMAP_SCSI,
-/*0x21*/ PSYCHO_IMAP_ETH,
-/*0x22*/ PSYCHO_IMAP_BPP,
-/*0x23*/ PSYCHO_IMAP_AU_REC,
-/*0x24*/ PSYCHO_IMAP_AU_PLAY,
-/*0x25*/ PSYCHO_IMAP_PFAIL,
-/*0x26*/ PSYCHO_IMAP_KMS,
-/*0x27*/ PSYCHO_IMAP_FLPY,
-/*0x28*/ PSYCHO_IMAP_SHW,
-/*0x29*/ PSYCHO_IMAP_KBD,
-/*0x2a*/ PSYCHO_IMAP_MS,
-/*0x2b*/ PSYCHO_IMAP_SER,
-/*0x2c*/ PSYCHO_IMAP_TIM0,
-/*0x2d*/ PSYCHO_IMAP_TIM1,
-/*0x2e*/ PSYCHO_IMAP_UE,
-/*0x2f*/ PSYCHO_IMAP_CE,
-/*0x30*/ PSYCHO_IMAP_A_ERR,
-/*0x31*/ PSYCHO_IMAP_B_ERR,
-/*0x32*/ PSYCHO_IMAP_PMGMT,
-/*0x33*/ PSYCHO_IMAP_GFX,
-/*0x34*/ PSYCHO_IMAP_EUPA,
-};
+#define PSYCHO_OBIO_IMAP_BASE 0x1000UL
+
#define PSYCHO_ONBOARD_IRQ_BASE 0x20
-#define PSYCHO_ONBOARD_IRQ_LAST 0x34
#define psycho_onboard_imap_offset(__ino) \
- __psycho_onboard_imap_off[(__ino) - PSYCHO_ONBOARD_IRQ_BASE]
+ (PSYCHO_OBIO_IMAP_BASE + (((__ino) & 0x1f) << 3))
#define PSYCHO_ICLR_A_SLOT0 0x1400UL
#define PSYCHO_ICLR_SCSI 0x1800UL
imap_off = psycho_pcislot_imap_offset(ino);
} else {
/* Onboard device */
- if (ino > PSYCHO_ONBOARD_IRQ_LAST) {
- prom_printf("psycho_irq_build: Wacky INO [%x]\n", ino);
- prom_halt();
- }
imap_off = psycho_onboard_imap_offset(ino);
}
#define SABRE_IMAP_A_SLOT0 0x0c00UL
#define SABRE_IMAP_B_SLOT0 0x0c20UL
-#define SABRE_IMAP_SCSI 0x1000UL
-#define SABRE_IMAP_ETH 0x1008UL
-#define SABRE_IMAP_BPP 0x1010UL
-#define SABRE_IMAP_AU_REC 0x1018UL
-#define SABRE_IMAP_AU_PLAY 0x1020UL
-#define SABRE_IMAP_PFAIL 0x1028UL
-#define SABRE_IMAP_KMS 0x1030UL
-#define SABRE_IMAP_FLPY 0x1038UL
-#define SABRE_IMAP_SHW 0x1040UL
-#define SABRE_IMAP_KBD 0x1048UL
-#define SABRE_IMAP_MS 0x1050UL
-#define SABRE_IMAP_SER 0x1058UL
-#define SABRE_IMAP_UE 0x1070UL
-#define SABRE_IMAP_CE 0x1078UL
-#define SABRE_IMAP_PCIERR 0x1080UL
-#define SABRE_IMAP_GFX 0x1098UL
-#define SABRE_IMAP_EUPA 0x10a0UL
#define SABRE_ICLR_A_SLOT0 0x1400UL
#define SABRE_ICLR_B_SLOT0 0x1480UL
#define SABRE_ICLR_SCSI 0x1800UL
return SABRE_IMAP_B_SLOT0 + (slot * 8);
}
-static unsigned long __sabre_onboard_imap_off[] = {
-/*0x20*/ SABRE_IMAP_SCSI,
-/*0x21*/ SABRE_IMAP_ETH,
-/*0x22*/ SABRE_IMAP_BPP,
-/*0x23*/ SABRE_IMAP_AU_REC,
-/*0x24*/ SABRE_IMAP_AU_PLAY,
-/*0x25*/ SABRE_IMAP_PFAIL,
-/*0x26*/ SABRE_IMAP_KMS,
-/*0x27*/ SABRE_IMAP_FLPY,
-/*0x28*/ SABRE_IMAP_SHW,
-/*0x29*/ SABRE_IMAP_KBD,
-/*0x2a*/ SABRE_IMAP_MS,
-/*0x2b*/ SABRE_IMAP_SER,
-/*0x2c*/ 0 /* reserved */,
-/*0x2d*/ 0 /* reserved */,
-/*0x2e*/ SABRE_IMAP_UE,
-/*0x2f*/ SABRE_IMAP_CE,
-/*0x30*/ SABRE_IMAP_PCIERR,
-/*0x31*/ 0 /* reserved */,
-/*0x32*/ 0 /* reserved */,
-/*0x33*/ SABRE_IMAP_GFX,
-/*0x34*/ SABRE_IMAP_EUPA,
-};
-#define SABRE_ONBOARD_IRQ_BASE 0x20
-#define SABRE_ONBOARD_IRQ_LAST 0x30
+#define SABRE_OBIO_IMAP_BASE 0x1000UL
+#define SABRE_ONBOARD_IRQ_BASE 0x20
#define sabre_onboard_imap_offset(__ino) \
- __sabre_onboard_imap_off[(__ino) - SABRE_ONBOARD_IRQ_BASE]
+ (SABRE_OBIO_IMAP_BASE + (((__ino) & 0x1f) << 3))
#define sabre_iclr_offset(ino) \
((ino & 0x20) ? (SABRE_ICLR_SCSI + (((ino) & 0x1f) << 3)) : \
imap_off = sabre_pcislot_imap_offset(ino);
} else {
/* onboard device */
- if (ino > SABRE_ONBOARD_IRQ_LAST) {
- prom_printf("sabre_irq_build: Wacky INO [%x]\n", ino);
- prom_halt();
- }
imap_off = sabre_onboard_imap_offset(ino);
}
*/
[REGSET_GENERAL] = {
.core_note_type = NT_PRSTATUS,
- .n = 36 * sizeof(u64),
+ .n = 36,
.size = sizeof(u64), .align = sizeof(u64),
.get = genregs64_get, .set = genregs64_set
},
*/
[REGSET_FP] = {
.core_note_type = NT_PRFPREG,
- .n = 35 * sizeof(u64),
+ .n = 35,
.size = sizeof(u64), .align = sizeof(u64),
.get = fpregs64_get, .set = fpregs64_set
},
*/
[REGSET_GENERAL] = {
.core_note_type = NT_PRSTATUS,
- .n = 38 * sizeof(u32),
+ .n = 38,
.size = sizeof(u32), .align = sizeof(u32),
.get = genregs32_get, .set = genregs32_set
},
*/
[REGSET_FP] = {
.core_note_type = NT_PRFPREG,
- .n = 99 * sizeof(u32),
+ .n = 99,
.size = sizeof(u32), .align = sizeof(u32),
.get = fpregs32_get, .set = fpregs32_set
},
#include <linux/module.h>
#include <linux/sched.h>
+#include <linux/linkage.h>
#include <linux/kernel.h>
#include <linux/signal.h>
#include <linux/smp.h>
/* This can get invoked before sched_init() so play it super safe
* and use hard_smp_processor_id().
*/
-void init_cur_cpu_trap(struct thread_info *t)
+void notrace init_cur_cpu_trap(struct thread_info *t)
{
int cpu = hard_smp_processor_id();
struct trap_per_cpu *p = &trap_block[cpu];
*/
static int iommu_completion_wait(struct amd_iommu *iommu)
{
- int ret, ready = 0;
+ int ret = 0, ready = 0;
unsigned status = 0;
struct iommu_cmd cmd;
- unsigned long i = 0;
+ unsigned long flags, i = 0;
memset(&cmd, 0, sizeof(cmd));
cmd.data[0] = CMD_COMPL_WAIT_INT_MASK;
iommu->need_sync = 0;
- ret = iommu_queue_command(iommu, &cmd);
+ spin_lock_irqsave(&iommu->lock, flags);
+
+ ret = __iommu_queue_command(iommu, &cmd);
if (ret)
- return ret;
+ goto out;
while (!ready && (i < EXIT_LOOP_COUNT)) {
++i;
if (unlikely((i == EXIT_LOOP_COUNT) && printk_ratelimit()))
printk(KERN_WARNING "AMD IOMMU: Completion wait loop failed\n");
+out:
+ spin_unlock_irqrestore(&iommu->lock, flags);
return 0;
}
static int iommu_queue_inv_dev_entry(struct amd_iommu *iommu, u16 devid)
{
struct iommu_cmd cmd;
+ int ret;
BUG_ON(iommu == NULL);
CMD_SET_TYPE(&cmd, CMD_INV_DEV_ENTRY);
cmd.data[0] = devid;
+ ret = iommu_queue_command(iommu, &cmd);
+
iommu->need_sync = 1;
- return iommu_queue_command(iommu, &cmd);
+ return ret;
}
/*
u64 address, u16 domid, int pde, int s)
{
struct iommu_cmd cmd;
+ int ret;
memset(&cmd, 0, sizeof(cmd));
address &= PAGE_MASK;
if (pde) /* PDE bit - we wan't flush everything not only the PTEs */
cmd.data[2] |= CMD_INV_IOMMU_PAGES_PDE_MASK;
+ ret = iommu_queue_command(iommu, &cmd);
+
iommu->need_sync = 1;
- return iommu_queue_command(iommu, &cmd);
+ return ret;
}
/*
/*
* The NOPL instruction is supposed to exist on all CPUs with
- * family >= 6, unfortunately, that's not true in practice because
+ * family >= 6; unfortunately, that's not true in practice because
* of early VIA chips and (more importantly) broken virtualizers that
- * are not easy to detect. Hence, probe for it based on first
- * principles.
+ * are not easy to detect. In the latter case it doesn't even *fail*
+ * reliably, so probing for it doesn't even work. Disable it completely
+ * unless we can find a reliable way to detect all the broken cases.
*/
static void __cpuinit detect_nopl(struct cpuinfo_x86 *c)
{
- const u32 nopl_signature = 0x888c53b1; /* Random number */
- u32 has_nopl = nopl_signature;
-
clear_cpu_cap(c, X86_FEATURE_NOPL);
- if (c->x86 >= 6) {
- asm volatile("\n"
- "1: .byte 0x0f,0x1f,0xc0\n" /* nopl %eax */
- "2:\n"
- " .section .fixup,\"ax\"\n"
- "3: xor %0,%0\n"
- " jmp 2b\n"
- " .previous\n"
- _ASM_EXTABLE(1b,3b)
- : "+a" (has_nopl));
-
- if (has_nopl == nopl_signature)
- set_cpu_cap(c, X86_FEATURE_NOPL);
- }
}
static void __cpuinit generic_identify(struct cpuinfo_x86 *c)
if (PageHighMem(pg)) {
data = ioremap_cache(pa_data, sizeof(*data));
if (!data) {
+ kfree(node);
error = -ENXIO;
goto err_dir;
}
return 1;
}
+static cpumask_t c1e_mask = CPU_MASK_NONE;
+static int c1e_detected;
+
+void c1e_remove_cpu(int cpu)
+{
+ cpu_clear(cpu, c1e_mask);
+}
+
/*
* C1E aware idle routine. We check for C1E active in the interrupt
* pending message MSR. If we detect C1E, then we handle it the same
*/
static void c1e_idle(void)
{
- static cpumask_t c1e_mask = CPU_MASK_NONE;
- static int c1e_detected;
-
if (need_resched())
return;
rdmsr(MSR_K8_INT_PENDING_MSG, lo, hi);
if (lo & K8_INTP_C1E_ACTIVE_MASK) {
c1e_detected = 1;
- mark_tsc_unstable("TSC halt in C1E");
- printk(KERN_INFO "System has C1E enabled\n");
+ if (!boot_cpu_has(X86_FEATURE_CONSTANT_TSC))
+ mark_tsc_unstable("TSC halt in AMD C1E");
+ printk(KERN_INFO "System has AMD C1E enabled\n");
+ set_cpu_cap(&boot_cpu_data, X86_FEATURE_AMDC1E);
}
}
#include <asm/tlbflush.h>
#include <asm/cpu.h>
#include <asm/kdebug.h>
+#include <asm/idle.h>
asmlinkage void ret_from_fork(void) __asm__("ret_from_fork");
cpu_clear(cpu, cpu_callin_map);
numa_remove_cpu(cpu);
+ c1e_remove_cpu(cpu);
}
/* We don't actually take CPU down, just spin without interrupts. */
static inline void play_dead(void)
{
idle_task_exit();
+ c1e_remove_cpu(raw_smp_processor_id());
+
mb();
/* Ack it */
__get_cpu_var(cpu_state) = CPU_DEAD;
parse_early_param();
+#ifdef CONFIG_X86_64
+ check_efer();
+#endif
+
#if defined(CONFIG_VMI) && defined(CONFIG_X86_32)
/*
* Must be before kernel pagetables are setup
#else
num_physpages = max_pfn;
- check_efer();
/* How many end-of-memory variables you have, grandma! */
/* need this before calling reserve_initrd */
native_restore_fl((flags | X86_EFLAGS_IF) & (~X86_EFLAGS_AC));
}
-static unsigned __init vsmp_patch(u8 type, u16 clobbers, void *ibuf,
+static unsigned __init_or_module vsmp_patch(u8 type, u16 clobbers, void *ibuf,
unsigned long addr, unsigned len)
{
switch (type) {
{
pgd_t *pgd_base = swapper_pg_dir;
- paravirt_pagetable_setup_start(pgd_base);
-
permanent_kmaps_init(pgd_base);
-
- paravirt_pagetable_setup_done(pgd_base);
}
#ifdef CONFIG_ACPI_SLEEP
static void nmi_shutdown(void)
{
- struct op_msrs *msrs = &get_cpu_var(cpu_msrs);
+ struct op_msrs *msrs;
+
nmi_enabled = 0;
on_each_cpu(nmi_cpu_shutdown, NULL, 1);
unregister_die_notifier(&profile_exceptions_nb);
+ msrs = &get_cpu_var(cpu_msrs);
model->shutdown(msrs);
free_msrs();
put_cpu_var(cpu_msrs);
e820.nr_map = 0;
- e820_add_region(0, PFN_PHYS(max_pfn), E820_RAM);
+ e820_add_region(0, PFN_PHYS((u64)max_pfn), E820_RAM);
/*
* Even though this is normal, usable memory under Xen, reserve
* off.
*/
if (pdev->vendor == PCI_VENDOR_ID_INTEL && pdev->device == 0x2652) {
- int rc = piix_disable_ahci(pdev);
+ rc = piix_disable_ahci(pdev);
if (rc)
return rc;
}
PORT_SCR = 0x20,
/* HOST_CTL bits */
+ HCTL_LEDEN = (1 << 3), /* enable LED operation */
HCTL_IRQOFF = (1 << 8), /* global IRQ off */
HCTL_FTHD0 = (1 << 10), /* fifo threshold 0 */
HCTL_FTHD1 = (1 << 11), /* fifo threshold 1*/
void __iomem *port_base = inic_port_base(ap);
/* fire up the ADMA engine */
- writew(HCTL_FTHD0, port_base + HOST_CTL);
+ writew(HCTL_FTHD0 | HCTL_LEDEN, port_base + HOST_CTL);
writew(IDMA_CTL_GO, port_base + PORT_IDMA_CTL);
writeb(0, port_base + PORT_CPB_PTQFIFO);
static void nv_nf2_thaw(struct ata_port *ap);
static void nv_ck804_freeze(struct ata_port *ap);
static void nv_ck804_thaw(struct ata_port *ap);
+static int nv_hardreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline);
static int nv_adma_slave_config(struct scsi_device *sdev);
static int nv_adma_check_atapi_dma(struct ata_queued_cmd *qc);
static void nv_adma_qc_prep(struct ata_queued_cmd *qc);
.slave_configure = nv_swncq_slave_config,
};
-static struct ata_port_operations nv_generic_ops = {
+/* OSDL bz3352 reports that some nv controllers can't determine device
+ * signature reliably and nv_hardreset is implemented to work around
+ * the problem. This was reported on nf3 and it's unclear whether any
+ * other controllers are affected. However, the workaround has been
+ * applied to all variants and there isn't much to gain by trying to
+ * find out exactly which ones are affected at this point especially
+ * because NV has moved over to ahci for newer controllers.
+ */
+static struct ata_port_operations nv_common_ops = {
.inherits = &ata_bmdma_port_ops,
- .hardreset = ATA_OP_NULL,
+ .hardreset = nv_hardreset,
.scr_read = nv_scr_read,
.scr_write = nv_scr_write,
};
+/* OSDL bz11195 reports that link doesn't come online after hardreset
+ * on generic nv's and there have been several other similar reports
+ * on linux-ide. Disable hardreset for generic nv's.
+ */
+static struct ata_port_operations nv_generic_ops = {
+ .inherits = &nv_common_ops,
+ .hardreset = ATA_OP_NULL,
+};
+
static struct ata_port_operations nv_nf2_ops = {
- .inherits = &nv_generic_ops,
+ .inherits = &nv_common_ops,
.freeze = nv_nf2_freeze,
.thaw = nv_nf2_thaw,
};
static struct ata_port_operations nv_ck804_ops = {
- .inherits = &nv_generic_ops,
+ .inherits = &nv_common_ops,
.freeze = nv_ck804_freeze,
.thaw = nv_ck804_thaw,
.host_stop = nv_ck804_host_stop,
};
static struct ata_port_operations nv_adma_ops = {
- .inherits = &nv_generic_ops,
+ .inherits = &nv_common_ops,
.check_atapi_dma = nv_adma_check_atapi_dma,
.sff_tf_read = nv_adma_tf_read,
};
static struct ata_port_operations nv_swncq_ops = {
- .inherits = &nv_generic_ops,
+ .inherits = &nv_common_ops,
.qc_defer = ata_std_qc_defer,
.qc_prep = nv_swncq_qc_prep,
ata_sff_thaw(ap);
}
+static int nv_hardreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
+{
+ int rc;
+
+ /* SATA hardreset fails to retrieve proper device signature on
+ * some controllers. Request follow up SRST. For more info,
+ * see http://bugzilla.kernel.org/show_bug.cgi?id=3352
+ */
+ rc = sata_sff_hardreset(link, class, deadline);
+ if (rc)
+ return rc;
+ return -EAGAIN;
+}
+
static void nv_adma_error_handler(struct ata_port *ap)
{
struct nv_adma_port_priv *pp = ap->private_data;
/* Broadcom BCM2046 */
{ USB_DEVICE(0x0a5c, 0x2151), .driver_info = BTUSB_RESET },
+ /* Apple MacBook Pro with Broadcom chip */
+ { USB_DEVICE(0x05ac, 0x820f), .driver_info = BTUSB_RESET },
+
/* IBM/Lenovo ThinkPad with Broadcom chip */
{ USB_DEVICE(0x0a5c, 0x201e), .driver_info = BTUSB_RESET | BTUSB_WRONG_SCO_MTU },
{ USB_DEVICE(0x0a5c, 0x2110), .driver_info = BTUSB_RESET | BTUSB_WRONG_SCO_MTU },
struct btusb_data {
struct hci_dev *hdev;
struct usb_device *udev;
+ struct usb_interface *intf;
struct usb_interface *isoc;
spinlock_t lock;
err = btusb_submit_intr_urb(hdev);
if (err < 0) {
- clear_bit(BTUSB_INTR_RUNNING, &hdev->flags);
+ clear_bit(BTUSB_INTR_RUNNING, &data->flags);
clear_bit(HCI_RUNNING, &hdev->flags);
}
if (!test_and_clear_bit(HCI_RUNNING, &hdev->flags))
return 0;
+ cancel_work_sync(&data->work);
+
clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
- usb_kill_anchored_urbs(&data->intr_anchor);
+ usb_kill_anchored_urbs(&data->isoc_anchor);
clear_bit(BTUSB_BULK_RUNNING, &data->flags);
usb_kill_anchored_urbs(&data->bulk_anchor);
}
data->udev = interface_to_usbdev(intf);
+ data->intf = intf;
spin_lock_init(&data->lock);
if (data->isoc) {
err = usb_driver_claim_interface(&btusb_driver,
- data->isoc, NULL);
+ data->isoc, data);
if (err < 0) {
hci_free_dev(hdev);
kfree(data);
hdev = data->hdev;
- if (data->isoc)
- usb_driver_release_interface(&btusb_driver, data->isoc);
+ __hci_dev_hold(hdev);
- usb_set_intfdata(intf, NULL);
+ usb_set_intfdata(data->intf, NULL);
+
+ if (data->isoc)
+ usb_set_intfdata(data->isoc, NULL);
hci_unregister_dev(hdev);
+ if (intf == data->isoc)
+ usb_driver_release_interface(&btusb_driver, data->intf);
+ else if (data->isoc)
+ usb_driver_release_interface(&btusb_driver, data->isoc);
+
+ __hci_dev_put(hdev);
+
hci_free_dev(hdev);
}
/* Number of monotonicity checks to perform during initialization */
#define ACPI_PM_MONOTONICITY_CHECKS 10
+/* Number of reads we try to get two different values */
+#define ACPI_PM_READ_CHECKS 10000
static int __init init_acpi_pm_clocksource(void)
{
cycle_t value1, value2;
- unsigned int i, j, good = 0;
+ unsigned int i, j = 0;
if (!pmtmr_ioport)
return -ENODEV;
/* "verify" this timing source: */
for (j = 0; j < ACPI_PM_MONOTONICITY_CHECKS; j++) {
+ udelay(100 * j);
value1 = clocksource_acpi_pm.read();
- for (i = 0; i < 10000; i++) {
+ for (i = 0; i < ACPI_PM_READ_CHECKS; i++) {
value2 = clocksource_acpi_pm.read();
if (value2 == value1)
continue;
if (value2 > value1)
- good++;
break;
if ((value2 < value1) && ((value2) < 0xFFF))
- good++;
break;
printk(KERN_INFO "PM-Timer had inconsistent results:"
" 0x%#llx, 0x%#llx - aborting.\n",
value1, value2);
return -EINVAL;
}
- udelay(300 * i);
- }
-
- if (good != ACPI_PM_MONOTONICITY_CHECKS) {
- printk(KERN_INFO "PM-Timer failed consistency check "
- " (0x%#llx) - aborting.\n", value1);
- return -ENODEV;
+ if (i == ACPI_PM_READ_CHECKS) {
+ printk(KERN_INFO "PM-Timer failed consistency check "
+ " (0x%#llx) - aborting.\n", value1);
+ return -ENODEV;
+ }
}
if (verify_pmtmr_rate() != 0)
edesc->desc.hdr = ctx->desc_hdr_template | DESC_HDR_MODE0_ENCRYPT;
memcpy(req->giv, ctx->iv, crypto_aead_ivsize(authenc));
+ /* avoid consecutive packets going out with same IV */
+ *(__be64 *)req->giv ^= cpu_to_be64(req->seq);
return ipsec_esp(edesc, areq, req->giv, req->seq,
ipsec_esp_encrypt_done);
priv->ofdev = ofdev;
+ INIT_LIST_HEAD(&priv->alg_list);
+
tasklet_init(&priv->done_task, talitos_done, (unsigned long)dev);
tasklet_init(&priv->error_task, talitos_error, (unsigned long)dev);
}
/* register crypto algorithms the device supports */
- INIT_LIST_HEAD(&priv->alg_list);
-
for (i = 0; i < ARRAY_SIZE(driver_algs); i++) {
if (hw_supports(dev, driver_algs[i].desc_hdr_template)) {
struct talitos_crypto_alg *t_alg;
return i2c_smbus_write_byte_data(client, reg, value);
}
-struct ad7414_data *ad7414_update_device(struct device *dev)
+static struct ad7414_data *ad7414_update_device(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct ad7414_data *data = i2c_get_clientdata(client);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("System voltages control via Attansic ATXP1");
-MODULE_VERSION("0.6.2");
+MODULE_VERSION("0.6.3");
MODULE_AUTHOR("Sebastian Witt <se.witt@gmx.net>");
#define ATXP1_VID 0x00
if (!((i2c_smbus_read_byte_data(new_client, 0x3e) == 0) &&
(i2c_smbus_read_byte_data(new_client, 0x3f) == 0) &&
(i2c_smbus_read_byte_data(new_client, 0xfe) == 0) &&
- (i2c_smbus_read_byte_data(new_client, 0xff) == 0) )) {
+ (i2c_smbus_read_byte_data(new_client, 0xff) == 0)))
+ return -ENODEV;
- /* No vendor ID, now checking if registers 0x10,0x11 (non-existent)
- * showing the same as register 0x00 */
- temp = i2c_smbus_read_byte_data(new_client, 0x00);
+ /* No vendor ID, now checking if registers 0x10,0x11 (non-existent)
+ * showing the same as register 0x00 */
+ temp = i2c_smbus_read_byte_data(new_client, 0x00);
- if (!((i2c_smbus_read_byte_data(new_client, 0x10) == temp) &&
- (i2c_smbus_read_byte_data(new_client, 0x11) == temp) ))
- return -ENODEV;
- }
+ if (!((i2c_smbus_read_byte_data(new_client, 0x10) == temp) &&
+ (i2c_smbus_read_byte_data(new_client, 0x11) == temp)))
+ return -ENODEV;
/* Get VRM */
temp = vid_which_vrm();
static inline int has_16bit_fans(const struct it87_data *data)
{
/* IT8705F Datasheet 0.4.1, 3h == Version G.
- IT8712F Datasheet 0.9.1, section 8.3.5 indicates 7h == Version I.
+ IT8712F Datasheet 0.9.1, section 8.3.5 indicates 8h == Version J.
These are the first revisions with 16bit tachometer support. */
return (data->type == it87 && data->revision >= 0x03)
- || (data->type == it8712 && data->revision >= 0x07)
+ || (data->type == it8712 && data->revision >= 0x08)
|| data->type == it8716
|| data->type == it8718;
}
};
-static int i2c_powermac_remove(struct platform_device *dev)
+static int __devexit i2c_powermac_remove(struct platform_device *dev)
{
struct i2c_adapter *adapter = platform_get_drvdata(dev);
struct pmac_i2c_bus *bus = i2c_get_adapdata(adapter);
}
-static int __devexit i2c_powermac_probe(struct platform_device *dev)
+static int __devinit i2c_powermac_probe(struct platform_device *dev)
{
struct pmac_i2c_bus *bus = dev->dev.platform_data;
struct device_node *parent = NULL;
goto out;
i2c_dev_class = class_create(THIS_MODULE, "i2c-dev");
- if (IS_ERR(i2c_dev_class))
+ if (IS_ERR(i2c_dev_class)) {
+ res = PTR_ERR(i2c_dev_class);
goto out_unreg_chrdev;
+ }
res = i2c_add_driver(&i2cdev_driver);
if (res)
static void set_fmr_seg(struct mlx4_wqe_fmr_seg *fseg, struct ib_send_wr *wr)
{
struct mlx4_ib_fast_reg_page_list *mfrpl = to_mfrpl(wr->wr.fast_reg.page_list);
+ int i;
+
+ for (i = 0; i < wr->wr.fast_reg.page_list_len; ++i)
+ wr->wr.fast_reg.page_list->page_list[i] =
+ cpu_to_be64(wr->wr.fast_reg.page_list->page_list[i] |
+ MLX4_MTT_FLAG_PRESENT);
fseg->flags = convert_access(wr->wr.fast_reg.access_flags);
fseg->mem_key = cpu_to_be32(wr->wr.fast_reg.rkey);
return ret;
cleanup_retrans_entry(cm_node);
cm_node->state = NES_CM_STATE_CLOSED;
- ret = send_fin(cm_node, NULL);
-
- if (cm_node->accept_pend) {
- BUG_ON(!cm_node->listener);
- atomic_dec(&cm_node->listener->pend_accepts_cnt);
- BUG_ON(atomic_read(&cm_node->listener->pend_accepts_cnt) < 0);
- }
ret = send_reset(cm_node, NULL);
return ret;
atomic_inc(&cm_disconnects);
cm_event.event = IW_CM_EVENT_DISCONNECT;
if (last_ae == NES_AEQE_AEID_LLP_CONNECTION_RESET) {
+ issued_disconnect_reset = 1;
cm_event.status = IW_CM_EVENT_STATUS_RESET;
nes_debug(NES_DBG_CM, "Generating a CM "
"Disconnect Event (status reset) for "
nes_debug(NES_DBG_CM, "Call close API\n");
g_cm_core->api->close(g_cm_core, nesqp->cm_node);
- nesqp->cm_node = NULL;
}
return ret;
cm_node->apbvt_set = 1;
nesqp->cm_node = cm_node;
cm_node->nesqp = nesqp;
+ nes_add_ref(&nesqp->ibqp);
return 0;
}
if (ret)
printk(KERN_ERR "%s[%u] OFA CM event_handler returned, "
"ret=%d\n", __func__, __LINE__, ret);
- nes_rem_ref(&nesqp->ibqp);
cm_id->rem_ref(cm_id);
rem_ref_cm_node(event->cm_node->cm_core, event->cm_node);
struct delayed_work pkey_poll_task;
struct delayed_work mcast_task;
+ struct work_struct carrier_on_task;
struct work_struct flush_light;
struct work_struct flush_normal;
struct work_struct flush_heavy;
void ipoib_dev_cleanup(struct net_device *dev);
void ipoib_mcast_join_task(struct work_struct *work);
+void ipoib_mcast_carrier_on_task(struct work_struct *work);
void ipoib_mcast_send(struct net_device *dev, void *mgid, struct sk_buff *skb);
void ipoib_mcast_restart_task(struct work_struct *work);
struct net_device *dev = path->dev;
struct ipoib_dev_priv *priv = netdev_priv(dev);
struct ipoib_ah *ah = NULL;
- struct ipoib_ah *old_ah;
+ struct ipoib_ah *old_ah = NULL;
struct ipoib_neigh *neigh, *tn;
struct sk_buff_head skqueue;
struct sk_buff *skb;
spin_lock_irqsave(&priv->lock, flags);
- old_ah = path->ah;
- path->ah = ah;
-
if (ah) {
path->pathrec = *pathrec;
+ old_ah = path->ah;
+ path->ah = ah;
+
ipoib_dbg(priv, "created address handle %p for LID 0x%04x, SL %d\n",
ah, be16_to_cpu(pathrec->dlid), pathrec->sl);
INIT_DELAYED_WORK(&priv->pkey_poll_task, ipoib_pkey_poll);
INIT_DELAYED_WORK(&priv->mcast_task, ipoib_mcast_join_task);
+ INIT_WORK(&priv->carrier_on_task, ipoib_mcast_carrier_on_task);
INIT_WORK(&priv->flush_light, ipoib_ib_dev_flush_light);
INIT_WORK(&priv->flush_normal, ipoib_ib_dev_flush_normal);
INIT_WORK(&priv->flush_heavy, ipoib_ib_dev_flush_heavy);
return ret;
}
+void ipoib_mcast_carrier_on_task(struct work_struct *work)
+{
+ struct ipoib_dev_priv *priv = container_of(work, struct ipoib_dev_priv,
+ carrier_on_task);
+
+ /*
+ * Take rtnl_lock to avoid racing with ipoib_stop() and
+ * turning the carrier back on while a device is being
+ * removed.
+ */
+ rtnl_lock();
+ netif_carrier_on(priv->dev);
+ rtnl_unlock();
+}
+
static int ipoib_mcast_join_complete(int status,
struct ib_sa_multicast *multicast)
{
&priv->mcast_task, 0);
mutex_unlock(&mcast_mutex);
- if (mcast == priv->broadcast) {
- /*
- * Take RTNL lock here to avoid racing with
- * ipoib_stop() and turning the carrier back
- * on while a device is being removed.
- */
- rtnl_lock();
- netif_carrier_on(dev);
- rtnl_unlock();
- }
+ /*
+ * Defer carrier on work to ipoib_workqueue to avoid a
+ * deadlock on rtnl_lock here.
+ */
+ if (mcast == priv->broadcast)
+ queue_work(ipoib_workqueue, &priv->carrier_on_task);
return 0;
}
#define BCM5974_WELLSPRING_MODE_REQUEST_VALUE 0x300
#define BCM5974_WELLSPRING_MODE_REQUEST_INDEX 0
#define BCM5974_WELLSPRING_MODE_VENDOR_VALUE 0x01
+#define BCM5974_WELLSPRING_MODE_NORMAL_VALUE 0x08
-static int bcm5974_wellspring_mode(struct bcm5974 *dev)
+static int bcm5974_wellspring_mode(struct bcm5974 *dev, bool on)
{
char *data = kmalloc(8, GFP_KERNEL);
int retval = 0, size;
}
/* apply the mode switch */
- data[0] = BCM5974_WELLSPRING_MODE_VENDOR_VALUE;
+ data[0] = on ?
+ BCM5974_WELLSPRING_MODE_VENDOR_VALUE :
+ BCM5974_WELLSPRING_MODE_NORMAL_VALUE;
/* write configuration */
size = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0),
goto out;
}
- dprintk(2, "bcm5974: switched to wellspring mode.\n");
+ dprintk(2, "bcm5974: switched to %s mode.\n",
+ on ? "wellspring" : "normal");
out:
kfree(data);
*/
static int bcm5974_start_traffic(struct bcm5974 *dev)
{
- if (bcm5974_wellspring_mode(dev)) {
+ if (bcm5974_wellspring_mode(dev, true)) {
dprintk(1, "bcm5974: mode switch failed\n");
goto error;
}
{
usb_kill_urb(dev->tp_urb);
usb_kill_urb(dev->bt_urb);
+ bcm5974_wellspring_mode(dev, false);
}
/*
input_dev->id.bustype = BUS_HOST;
input_dev->dev.parent = &pdev->dev;
- input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
- input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
+ input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+ input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
input_set_abs_params(input_dev, ABS_X, 270, 3900, 0, 0);
input_set_abs_params(input_dev, ABS_Y, 180, 3700, 0, 0);
* time 'round when curr_resync == 2
*/
continue;
- prepare_to_wait(&resync_wait, &wq, TASK_UNINTERRUPTIBLE);
+ /* We need to wait 'interruptible' so as not to
+ * contribute to the load average, and not to
+ * be caught by 'softlockup'
+ */
+ prepare_to_wait(&resync_wait, &wq, TASK_INTERRUPTIBLE);
if (!kthread_should_stop() &&
mddev2->curr_resync >= mddev->curr_resync) {
printk(KERN_INFO "md: delaying %s of %s"
" share one or more physical units)\n",
desc, mdname(mddev), mdname(mddev2));
mddev_put(mddev2);
+ if (signal_pending(current))
+ flush_signals(current);
schedule();
finish_wait(&resync_wait, &wq);
goto try_again;
}
static struct class memstick_host_class = {
- .name = "memstick_host",
+ .name = "memstick_host",
.dev_release = memstick_free
};
* @sg - TPC argument
*/
void memstick_init_req_sg(struct memstick_request *mrq, unsigned char tpc,
- struct scatterlist *sg)
+ const struct scatterlist *sg)
{
mrq->tpc = tpc;
if (tpc & 8)
* user supplied buffer.
*/
void memstick_init_req(struct memstick_request *mrq, unsigned char tpc,
- void *buf, size_t length)
+ const void *buf, size_t length)
{
mrq->tpc = tpc;
if (tpc & 8)
if (!host->card) {
if (memstick_power_on(host))
goto out_power_off;
- } else
+ } else if (host->card->stop)
host->card->stop(host->card);
card = memstick_alloc_card(host);
|| !(host->card->check(host->card))) {
device_unregister(&host->card->dev);
host->card = NULL;
- } else
+ } else if (host->card->start)
host->card->start(host->card);
}
#define MSPRO_BLOCK_SIGNATURE 0xa5c3
#define MSPRO_BLOCK_MAX_ATTRIBUTES 41
+#define MSPRO_BLOCK_PART_SHIFT 3
+
enum {
MSPRO_BLOCK_ID_SYSINFO = 0x10,
MSPRO_BLOCK_ID_MODELNAME = 0x15,
static int mspro_block_disk_release(struct gendisk *disk)
{
struct mspro_block_data *msb = disk->private_data;
- int disk_id = disk->first_minor >> MEMSTICK_PART_SHIFT;
+ int disk_id = disk->first_minor >> MSPRO_BLOCK_PART_SHIFT;
mutex_lock(&mspro_block_disk_lock);
struct mspro_block_data *msb = memstick_get_drvdata(card);
int rc = 0;
+try_again:
if (msb->caps & MEMSTICK_CAP_PAR4)
rc = mspro_block_set_interface(card, MEMSTICK_SYS_PAR4);
else
rc = memstick_set_rw_addr(card);
if (!rc)
rc = mspro_block_set_interface(card, msb->system);
+
+ if (!rc) {
+ msleep(150);
+ rc = mspro_block_wait_for_ced(card);
+ if (rc)
+ return rc;
+
+ if (msb->caps & MEMSTICK_CAP_PAR8) {
+ msb->caps &= ~MEMSTICK_CAP_PAR8;
+ goto try_again;
+ }
+ }
}
return rc;
}
return -EIO;
msb->caps = host->caps;
- rc = mspro_block_switch_interface(card);
+
+ msleep(150);
+ rc = mspro_block_wait_for_ced(card);
if (rc)
return rc;
- msleep(200);
- rc = mspro_block_wait_for_ced(card);
+ rc = mspro_block_switch_interface(card);
if (rc)
return rc;
+
dev_dbg(&card->dev, "card activated\n");
if (msb->system != MEMSTICK_SYS_SERIAL)
msb->caps |= MEMSTICK_CAP_AUTO_GET_INT;
if (rc)
return rc;
- if ((disk_id << MEMSTICK_PART_SHIFT) > 255) {
+ if ((disk_id << MSPRO_BLOCK_PART_SHIFT) > 255) {
rc = -ENOSPC;
goto out_release_id;
}
- msb->disk = alloc_disk(1 << MEMSTICK_PART_SHIFT);
+ msb->disk = alloc_disk(1 << MSPRO_BLOCK_PART_SHIFT);
if (!msb->disk) {
rc = -ENOMEM;
goto out_release_id;
MSPRO_BLOCK_MAX_PAGES * msb->page_size);
msb->disk->major = major;
- msb->disk->first_minor = disk_id << MEMSTICK_PART_SHIFT;
+ msb->disk->first_minor = disk_id << MSPRO_BLOCK_PART_SHIFT;
msb->disk->fops = &ms_block_bdops;
msb->usage_count = 1;
msb->disk->private_data = msb;
static struct memstick_device_id mspro_block_id_tbl[] = {
{MEMSTICK_MATCH_ALL, MEMSTICK_TYPE_PRO, MEMSTICK_CATEGORY_STORAGE_DUO,
- MEMSTICK_CLASS_GENERIC_DUO},
+ MEMSTICK_CLASS_DUO},
{}
};
#define TPC_CODE_SZ_MASK 0x00000700
#define TPC_DATA_SZ_MASK 0x00000007
+#define HOST_CONTROL_TDELAY_EN 0x00040000
+#define HOST_CONTROL_HW_OC_P 0x00010000
#define HOST_CONTROL_RESET_REQ 0x00008000
#define HOST_CONTROL_REI 0x00004000
#define HOST_CONTROL_LED 0x00000400
#define HOST_CONTROL_RESET 0x00000100
#define HOST_CONTROL_POWER_EN 0x00000080
#define HOST_CONTROL_CLOCK_EN 0x00000040
+#define HOST_CONTROL_REO 0x00000008
#define HOST_CONTROL_IF_SHIFT 4
#define HOST_CONTROL_IF_SERIAL 0x0
#define PAD_PU_PD_ON_MS_SOCK1 0x0f0f0000
#define CLOCK_CONTROL_40MHZ 0x00000001
-#define CLOCK_CONTROL_50MHZ 0x00000002
+#define CLOCK_CONTROL_50MHZ 0x0000000a
#define CLOCK_CONTROL_60MHZ 0x00000008
#define CLOCK_CONTROL_62_5MHZ 0x0000000c
#define CLOCK_CONTROL_OFF 0x00000000
+#define PCI_CTL_CLOCK_DLY_ADDR 0x000000b0
+#define PCI_CTL_CLOCK_DLY_MASK_A 0x00000f00
+#define PCI_CTL_CLOCK_DLY_MASK_B 0x0000f000
+
enum {
CMD_READY = 0x01,
FIFO_READY = 0x02,
return host->req->error;
}
- dev_dbg(&msh->dev, "control %08x\n",
- readl(host->addr + HOST_CONTROL));
+ dev_dbg(&msh->dev, "control %08x\n", readl(host->addr + HOST_CONTROL));
dev_dbg(&msh->dev, "status %08x\n", readl(host->addr + INT_STATUS));
dev_dbg(&msh->dev, "hstatus %08x\n", readl(host->addr + STATUS));
ndelay(20);
}
dev_dbg(&host->chip->pdev->dev, "reset_req timeout\n");
- return -EIO;
+ /* return -EIO; */
reset_next:
writel(HOST_CONTROL_RESET | HOST_CONTROL_CLOCK_EN
host_ctl = 7;
host_ctl |= HOST_CONTROL_POWER_EN
- | HOST_CONTROL_CLOCK_EN;
+ | HOST_CONTROL_CLOCK_EN
+ | HOST_CONTROL_HW_OC_P
+ | HOST_CONTROL_TDELAY_EN;
writel(host_ctl, host->addr + HOST_CONTROL);
writel(host->id ? PAD_PU_PD_ON_MS_SOCK1
break;
case MEMSTICK_INTERFACE:
host_ctl &= ~(3 << HOST_CONTROL_IF_SHIFT);
+ pci_read_config_dword(host->chip->pdev,
+ PCI_CTL_CLOCK_DLY_ADDR,
+ &clock_delay);
+ clock_delay &= host->id ? ~PCI_CTL_CLOCK_DLY_MASK_B
+ : ~PCI_CTL_CLOCK_DLY_MASK_A;
if (value == MEMSTICK_SERIAL) {
host_ctl &= ~HOST_CONTROL_FAST_CLK;
+ host_ctl &= ~HOST_CONTROL_REO;
host_ctl |= HOST_CONTROL_IF_SERIAL
<< HOST_CONTROL_IF_SHIFT;
host_ctl |= HOST_CONTROL_REI;
clock_ctl = CLOCK_CONTROL_40MHZ;
- clock_delay = 0;
} else if (value == MEMSTICK_PAR4) {
- host_ctl |= HOST_CONTROL_FAST_CLK;
+ host_ctl |= HOST_CONTROL_FAST_CLK | HOST_CONTROL_REO;
host_ctl |= HOST_CONTROL_IF_PAR4
<< HOST_CONTROL_IF_SHIFT;
host_ctl &= ~HOST_CONTROL_REI;
clock_ctl = CLOCK_CONTROL_40MHZ;
- clock_delay = 4;
+ clock_delay |= host->id ? (4 << 12) : (4 << 8);
} else if (value == MEMSTICK_PAR8) {
host_ctl |= HOST_CONTROL_FAST_CLK;
host_ctl |= HOST_CONTROL_IF_PAR8
<< HOST_CONTROL_IF_SHIFT;
- host_ctl &= ~HOST_CONTROL_REI;
- clock_ctl = CLOCK_CONTROL_60MHZ;
- clock_delay = 0;
+ host_ctl &= ~(HOST_CONTROL_REI | HOST_CONTROL_REO);
+ clock_ctl = CLOCK_CONTROL_50MHZ;
} else
return -EINVAL;
+
writel(host_ctl, host->addr + HOST_CONTROL);
writel(clock_ctl, host->addr + CLOCK_CONTROL);
- writel(clock_delay, host->addr + CLOCK_DELAY);
+ pci_write_config_dword(host->chip->pdev,
+ PCI_CTL_CLOCK_DLY_ADDR,
+ clock_delay);
break;
};
return 0;
int order = get_order(sizeof(struct gru_state) *
GRU_CHIPLETS_PER_BLADE);
+ if (!IS_UV())
+ return;
+
for (i = 0; i < GRU_CHIPLETS_PER_BLADE; i++)
free_irq(IRQ_GRU + i, NULL);
static int __init mmc_blk_init(void)
{
- int res = -ENOMEM;
+ int res;
res = register_blkdev(MMC_BLOCK_MAJOR, "mmc");
if (res)
goto out;
- return mmc_register_driver(&mmc_driver);
+ res = mmc_register_driver(&mmc_driver);
+ if (res)
+ goto out2;
+ return 0;
+ out2:
+ unregister_blkdev(MMC_BLOCK_MAJOR, "mmc");
out:
return res;
}
};
-static struct mutex mmc_test_lock;
+static DEFINE_MUTEX(mmc_test_lock);
static void mmc_test_run(struct mmc_test_card *test, int testcase)
{
if ((card->type != MMC_TYPE_MMC) && (card->type != MMC_TYPE_SD))
return -ENODEV;
- mutex_init(&mmc_test_lock);
-
ret = device_create_file(&card->dev, &dev_attr_test);
if (ret)
return ret;
/* Grab a more or less consistent snapshot */
spin_lock_irq(&host->mmc->lock);
+ clk_enable(host->mck);
memcpy_fromio(buf, host->regs, MCI_REGS_SIZE);
+ clk_disable(host->mck);
spin_unlock_irq(&host->mmc->lock);
seq_printf(s, "MR:\t0x%08x%s%s CLKDIV=%u\n",
atmci_show_status_reg(s, "SR", buf[MCI_SR / 4]);
atmci_show_status_reg(s, "IMR", buf[MCI_IMR / 4]);
+ kfree(buf);
+
return 0;
}
struct mmc_host *mmc;
struct dentry *root;
struct dentry *node;
- struct resource *res;
mmc = host->mmc;
root = mmc->debugfs_root;
if (!node)
goto err;
- res = platform_get_resource(host->pdev, IORESOURCE_MEM, 0);
- node->d_inode->i_size = res->end - res->start + 1;
-
node = debugfs_create_file("req", S_IRUSR, root, host, &atmci_req_fops);
if (!node)
goto err;
host->present = !gpio_get_value(host->detect_pin);
}
}
+
+ if (!gpio_is_valid(host->detect_pin))
+ mmc->caps |= MMC_CAP_NEEDS_POLL;
+
if (gpio_is_valid(host->wp_pin)) {
if (gpio_request(host->wp_pin, "mmc_wp")) {
dev_dbg(&mmc->class_dev, "no WP pin available\n");
#define STATUS_TO_TEXT(a) \
do { \
if (status & TMIO_STAT_##a) \
- printf(#a); \
+ printk(#a); \
} while (0)
-void debug_status(u32 status)
+void pr_debug_status(u32 status)
{
printk(KERN_DEBUG "status: %08x = ", status);
STATUS_TO_TEXT(CARD_REMOVE);
struct bnx2_irq {
irq_handler_t handler;
- u16 vector;
+ unsigned int vector;
u8 requested;
char name[16];
};
nic->flags |= wol_magic;
/* ack any pending wake events, disable PME */
- err = pci_enable_wake(pdev, 0, 0);
- if (err)
- DPRINTK(PROBE, ERR, "Error clearing wake event\n");
+ pci_pme_active(pdev, false);
strcpy(netdev->name, "eth%d");
if((err = register_netdev(netdev))) {
static u8 e1000_calculate_mng_checksum(char *buffer, u32 length);
static s32 e1000_configure_kmrn_for_10_100(struct e1000_hw *hw, u16 duplex);
static s32 e1000_configure_kmrn_for_1000(struct e1000_hw *hw);
+static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
+static s32 e1000_do_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
/* IGP cable length table */
static const
83, 89, 95, 100, 105, 109, 113, 116, 119, 122, 124,
104, 109, 114, 118, 121, 124};
+static DEFINE_SPINLOCK(e1000_eeprom_lock);
+
/******************************************************************************
* Set the phy type member in the hw struct.
*
* words - number of words to read
*****************************************************************************/
s32 e1000_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+{
+ s32 ret;
+ spin_lock(&e1000_eeprom_lock);
+ ret = e1000_do_read_eeprom(hw, offset, words, data);
+ spin_unlock(&e1000_eeprom_lock);
+ return ret;
+}
+
+static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
{
struct e1000_eeprom_info *eeprom = &hw->eeprom;
u32 i = 0;
* EEPROM will most likely contain an invalid checksum.
*****************************************************************************/
s32 e1000_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+{
+ s32 ret;
+ spin_lock(&e1000_eeprom_lock);
+ ret = e1000_do_write_eeprom(hw, offset, words, data);
+ spin_unlock(&e1000_eeprom_lock);
+ return ret;
+}
+
+
+static s32 e1000_do_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
{
struct e1000_eeprom_info *eeprom = &hw->eeprom;
s32 status = 0;
dev->dev_addr[4] = (np->orig_mac[0] >> 8) & 0xff;
dev->dev_addr[5] = (np->orig_mac[0] >> 0) & 0xff;
writel(txreg|NVREG_TRANSMITPOLL_MAC_ADDR_REV, base + NvRegTransmitPoll);
+ printk(KERN_DEBUG "nv_probe: set workaround bit for reversed mac addr\n");
}
memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
}
}
-static void __devexit nv_remove(struct pci_dev *pci_dev)
+static void nv_restore_mac_addr(struct pci_dev *pci_dev)
{
struct net_device *dev = pci_get_drvdata(pci_dev);
struct fe_priv *np = netdev_priv(dev);
u8 __iomem *base = get_hwbase(dev);
- unregister_netdev(dev);
-
/* special op: write back the misordered MAC address - otherwise
* the next nv_probe would see a wrong address.
*/
writel(np->orig_mac[1], base + NvRegMacAddrB);
writel(readl(base + NvRegTransmitPoll) & ~NVREG_TRANSMITPOLL_MAC_ADDR_REV,
base + NvRegTransmitPoll);
+}
+
+static void __devexit nv_remove(struct pci_dev *pci_dev)
+{
+ struct net_device *dev = pci_get_drvdata(pci_dev);
+
+ unregister_netdev(dev);
+
+ nv_restore_mac_addr(pci_dev);
/* restore any phy related changes */
nv_restore_phy(dev);
if (netif_running(dev))
nv_close(dev);
+ nv_restore_mac_addr(pdev);
+
pci_disable_device(pdev);
if (system_state == SYSTEM_POWER_OFF) {
if (pci_enable_wake(pdev, PCI_D3cold, np->wolenabled))
#ifndef MODULE
struct net_device * __init hp_plus_probe(int unit)
{
- struct net_device *dev = alloc_ei_netdev();
+ struct net_device *dev = alloc_eip_netdev();
int err;
if (!dev)
int option_reg;
int retval;
- if ((retval = request_irq(dev->irq, ei_interrupt, 0, dev->name, dev))) {
+ if ((retval = request_irq(dev->irq, eip_interrupt, 0, dev->name, dev))) {
return retval;
}
/* Select the operational page. */
outw(Perf_Page, ioaddr + HP_PAGING);
- ei_open(dev);
+ eip_open(dev);
return 0;
}
int option_reg = inw(ioaddr + HPP_OPTION);
free_irq(dev->irq, dev);
- ei_close(dev);
+ eip_close(dev);
outw((option_reg & ~EnableIRQ) | MemDisable | NICReset | ChipReset,
ioaddr + HPP_OPTION);
#define MLX4_MPT_FLAG_PHYSICAL (1 << 9)
#define MLX4_MPT_FLAG_REGION (1 << 8)
-#define MLX4_MPT_PD_FLAG_FAST_REG (1 << 26)
+#define MLX4_MPT_PD_FLAG_FAST_REG (1 << 27)
+#define MLX4_MPT_PD_FLAG_RAE (1 << 28)
#define MLX4_MPT_PD_FLAG_EN_INV (3 << 24)
-#define MLX4_MTT_FLAG_PRESENT 1
-
#define MLX4_MPT_STATUS_SW 0xF0
#define MLX4_MPT_STATUS_HW 0x00
if (mr->mtt.order >= 0 && mr->mtt.page_shift == 0) {
/* fast register MR in free state */
mpt_entry->flags |= cpu_to_be32(MLX4_MPT_FLAG_FREE);
- mpt_entry->pd_flags |= cpu_to_be32(MLX4_MPT_PD_FLAG_FAST_REG);
+ mpt_entry->pd_flags |= cpu_to_be32(MLX4_MPT_PD_FLAG_FAST_REG |
+ MLX4_MPT_PD_FLAG_RAE);
+ mpt_entry->mtt_sz = cpu_to_be32((1 << mr->mtt.order) *
+ MLX4_MTT_ENTRY_PER_SEG);
} else {
mpt_entry->flags |= cpu_to_be32(MLX4_MPT_FLAG_SW_OWNS);
}
niu_enable_interrupts(np, 1);
}
+static void niu_reset_buffers(struct niu *np)
+{
+ int i, j, k, err;
+
+ if (np->rx_rings) {
+ for (i = 0; i < np->num_rx_rings; i++) {
+ struct rx_ring_info *rp = &np->rx_rings[i];
+
+ for (j = 0, k = 0; j < MAX_RBR_RING_SIZE; j++) {
+ struct page *page;
+
+ page = rp->rxhash[j];
+ while (page) {
+ struct page *next =
+ (struct page *) page->mapping;
+ u64 base = page->index;
+ base = base >> RBR_DESCR_ADDR_SHIFT;
+ rp->rbr[k++] = cpu_to_le32(base);
+ page = next;
+ }
+ }
+ for (; k < MAX_RBR_RING_SIZE; k++) {
+ err = niu_rbr_add_page(np, rp, GFP_ATOMIC, k);
+ if (unlikely(err))
+ break;
+ }
+
+ rp->rbr_index = rp->rbr_table_size - 1;
+ rp->rcr_index = 0;
+ rp->rbr_pending = 0;
+ rp->rbr_refill_pending = 0;
+ }
+ }
+ if (np->tx_rings) {
+ for (i = 0; i < np->num_tx_rings; i++) {
+ struct tx_ring_info *rp = &np->tx_rings[i];
+
+ for (j = 0; j < MAX_TX_RING_SIZE; j++) {
+ if (rp->tx_buffs[j].skb)
+ (void) release_tx_packet(np, rp, j);
+ }
+
+ rp->pending = MAX_TX_RING_SIZE;
+ rp->prod = 0;
+ rp->cons = 0;
+ rp->wrap_bit = 0;
+ }
+ }
+}
+
static void niu_reset_task(struct work_struct *work)
{
struct niu *np = container_of(work, struct niu, reset_task);
niu_stop_hw(np);
+ spin_unlock_irqrestore(&np->lock, flags);
+
+ niu_reset_buffers(np);
+
+ spin_lock_irqsave(&np->lock, flags);
+
err = niu_init_hw(np);
if (!err) {
np->timer.expires = jiffies + HZ;
unsigned int curlen;
struct ath_txq *cabq;
struct ath_txq *mcastq;
+ struct ieee80211_tx_info *info;
avp = sc->sc_vaps[if_id];
mcastq = &avp->av_mcastq;
*/
curlen = skb->len;
+ info = IEEE80211_SKB_CB(skb);
+ if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
+ /*
+ * TODO: make sure the seq# gets assigned properly (vs. other
+ * TX frames)
+ */
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+ sc->seq_no += 0x10;
+ hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
+ hdr->seq_ctrl |= cpu_to_le16(sc->seq_no);
+ }
+
/* XXX: spin_lock_bh should not be used here, but sparse bitches
* otherwise. We should fix sparse :) */
spin_lock_bh(&mcastq->axq_lock);
* hardware is gone (invalid).
*/
- if (!sc->sc_invalid)
- ath9k_hw_set_interrupts(ah, 0);
ath_draintxq(sc, false);
if (!sc->sc_invalid) {
ath_stoprecv(sc);
if (ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT)
sc->sc_imask |= ATH9K_INT_CST;
+ /* Note: We disable MIB interrupts for now as we don't yet
+ * handle processing ANI, otherwise you will get an interrupt
+ * storm after about 7 hours of usage making the system unusable
+ * with huge latency. Once we do have ANI processing included
+ * we can re-enable this interrupt. */
+#if 0
/*
* Enable MIB interrupts when there are hardware phy counters.
* Note we only do this (at the moment) for station mode.
if (ath9k_hw_phycounters(ah) &&
((sc->sc_opmode == ATH9K_M_STA) || (sc->sc_opmode == ATH9K_M_IBSS)))
sc->sc_imask |= ATH9K_INT_MIB;
+#endif
/*
* Some hardware processes the TIM IE and fires an
* interrupt when the TIM bit is set. For hardware
DPRINTF(sc, ATH_DBG_CONFIG, "%s\n", __func__);
+ tasklet_kill(&sc->intr_tq);
+ tasklet_kill(&sc->bcon_tasklet);
ath_stop(sc);
if (!sc->sc_invalid)
ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_AWAKE);
u32 sc_keymax; /* size of key cache */
DECLARE_BITMAP(sc_keymap, ATH_KEYMAX); /* key use bit map */
u8 sc_splitmic; /* split TKIP MIC keys */
- int sc_keytype;
/* RX */
struct list_head sc_rxbuf;
u32 sc_txintrperiod; /* tx interrupt batching */
int sc_haltype2q[ATH9K_WME_AC_VO+1]; /* HAL WME AC -> h/w qnum */
u32 sc_ant_tx[8]; /* recent tx frames/antenna */
+ u16 seq_no; /* TX sequence number */
/* Beacon */
struct ath9k_tx_queue_info sc_beacon_qi;
if (!ret)
return -EIO;
- if (mac)
- sc->sc_keytype = hk.kv_type;
return 0;
}
{
struct ath_softc *sc = hw->priv;
int hdrlen, padsize;
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+
+ /*
+ * As a temporary workaround, assign seq# here; this will likely need
+ * to be cleaned up to work better with Beacon transmission and virtual
+ * BSSes.
+ */
+ if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+ if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)
+ sc->seq_no += 0x10;
+ hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
+ hdr->seq_ctrl |= cpu_to_le16(sc->seq_no);
+ }
/* Add the padding after the header if this is not already done */
hdrlen = ieee80211_get_hdrlen_from_skb(skb);
case DISABLE_KEY:
ath_key_delete(sc, key);
clear_bit(key->keyidx, sc->sc_keymap);
- sc->sc_keytype = ATH9K_CIPHER_CLR;
break;
default:
ret = -EINVAL;
{
struct ieee80211_hw *hw = pci_get_drvdata(pdev);
struct ath_softc *sc = hw->priv;
+ enum ath9k_int status;
- if (pdev->irq)
+ if (pdev->irq) {
+ ath9k_hw_set_interrupts(sc->sc_ah, 0);
+ /* clear the ISR */
+ ath9k_hw_getisr(sc->sc_ah, &status);
+ sc->sc_invalid = 1;
free_irq(pdev->irq, sc);
+ }
ath_detach(sc);
+
pci_iounmap(pdev, sc->mem);
pci_release_region(pdev, 0);
pci_disable_device(pdev);
txctl->keyix = tx_info->control.hw_key->hw_key_idx;
txctl->frmlen += tx_info->control.icv_len;
- if (sc->sc_keytype == ATH9K_CIPHER_WEP)
+ if (tx_info->control.hw_key->alg == ALG_WEP)
txctl->keytype = ATH9K_KEY_TYPE_WEP;
- else if (sc->sc_keytype == ATH9K_CIPHER_TKIP)
+ else if (tx_info->control.hw_key->alg == ALG_TKIP)
txctl->keytype = ATH9K_KEY_TYPE_TKIP;
- else if (sc->sc_keytype == ATH9K_CIPHER_AES_CCM)
+ else if (tx_info->control.hw_key->alg == ALG_CCMP)
txctl->keytype = ATH9K_KEY_TYPE_AES;
}
return 0;
}
-/* Update the rfkill state */
-static void b43_rfkill_update_state(struct b43_wldev *dev)
-{
- struct b43_rfkill *rfk = &(dev->wl->rfkill);
-
- if (!dev->radio_hw_enable) {
- rfk->rfkill->state = RFKILL_STATE_HARD_BLOCKED;
- return;
- }
-
- if (!dev->phy.radio_on)
- rfk->rfkill->state = RFKILL_STATE_SOFT_BLOCKED;
- else
- rfk->rfkill->state = RFKILL_STATE_UNBLOCKED;
-
-}
-
/* The poll callback for the hardware button. */
static void b43_rfkill_poll(struct input_polled_dev *poll_dev)
{
if (unlikely(enabled != dev->radio_hw_enable)) {
dev->radio_hw_enable = enabled;
report_change = 1;
- b43_rfkill_update_state(dev);
b43info(wl, "Radio hardware status changed to %s\n",
enabled ? "ENABLED" : "DISABLED");
}
return 0;
}
-/* Update the rfkill state */
-static void b43legacy_rfkill_update_state(struct b43legacy_wldev *dev)
-{
- struct b43legacy_rfkill *rfk = &(dev->wl->rfkill);
-
- if (!dev->radio_hw_enable) {
- rfk->rfkill->state = RFKILL_STATE_HARD_BLOCKED;
- return;
- }
-
- if (!dev->phy.radio_on)
- rfk->rfkill->state = RFKILL_STATE_SOFT_BLOCKED;
- else
- rfk->rfkill->state = RFKILL_STATE_UNBLOCKED;
-
-}
-
/* The poll callback for the hardware button. */
static void b43legacy_rfkill_poll(struct input_polled_dev *poll_dev)
{
if (unlikely(enabled != dev->radio_hw_enable)) {
dev->radio_hw_enable = enabled;
report_change = 1;
- b43legacy_rfkill_update_state(dev);
b43legacyinfo(wl, "Radio hardware status changed to %s\n",
enabled ? "ENABLED" : "DISABLED");
}
{ USB_DEVICE(0x0586, 0x3407), .driver_info = DEVICE_ZD1211 },
{ USB_DEVICE(0x129b, 0x1666), .driver_info = DEVICE_ZD1211 },
{ USB_DEVICE(0x157e, 0x300a), .driver_info = DEVICE_ZD1211 },
+ { USB_DEVICE(0x0105, 0x145f), .driver_info = DEVICE_ZD1211 },
/* ZD1211B */
{ USB_DEVICE(0x0ace, 0x1215), .driver_info = DEVICE_ZD1211B },
{ USB_DEVICE(0x157e, 0x300d), .driver_info = DEVICE_ZD1211B },
return -ENODEV;
}
+ /* remove the device from the pci core */
+ pci_remove_bus_device(dev);
+
/* queue work item to blow away this sysfs entry and other
* parts.
*/
INIT_WORK(&dslot->remove_work, remove_slot_worker);
queue_work(dummyphp_wq, &dslot->remove_work);
- /* blow away this sysfs entry and other parts. */
- remove_slot(dslot);
-
pci_dev_put(dev);
}
return 0;
return 1;
}
}
- while (timeout > 1000) {
+ while (timeout > 0) {
msleep(10);
timeout -= 10;
if (!pciehp_readw(ctrl, SLOTSTATUS, &slot_status)) {
}
+static int blacklist_iommu(const struct dmi_system_id *id)
+{
+ printk(KERN_INFO "%s detected; disabling IOMMU\n",
+ id->ident);
+ dmar_disabled = 1;
+ return 0;
+}
+
+static struct dmi_system_id __initdata intel_iommu_dmi_table[] = {
+ { /* Some DG33BU BIOS revisions advertised non-existent VT-d */
+ .callback = blacklist_iommu,
+ .ident = "Intel DG33BU",
+ { DMI_MATCH(DMI_BOARD_VENDOR, "Intel Corporation"),
+ DMI_MATCH(DMI_BOARD_NAME, "DG33BU"),
+ }
+ },
+ { }
+};
+
+
void __init detect_intel_iommu(void)
{
if (swiotlb || no_iommu || iommu_detected || dmar_disabled)
return;
if (early_dmar_detect()) {
+ dmi_check_system(intel_iommu_dmi_table);
+ if (dmar_disabled)
+ return;
iommu_detected = 1;
}
}
*/
pci_read_config_dword(child_dev, child_pos + PCI_EXP_DEVCAP,
®32);
- if (!(reg32 & PCI_EXP_DEVCAP_RBER && !aspm_force)) {
+ if (!(reg32 & PCI_EXP_DEVCAP_RBER) && !aspm_force) {
printk("Pre-1.1 PCIe device detected, "
"disable ASPM for %s. It can be enabled forcedly"
" with 'pcie_aspm=force'\n", pci_name(pdev));
} else {
res->start = l64;
res->end = l64 + sz64;
+ printk(KERN_DEBUG "PCI: %s reg %x 64bit mmio: [%llx, %llx]\n",
+ pci_name(dev), pos, (unsigned long long)res->start,
+ (unsigned long long)res->end);
}
} else {
sz = pci_size(l, sz, mask);
res->start = l;
res->end = l + sz;
+ printk(KERN_DEBUG "PCI: %s reg %x %s: [%llx, %llx]\n", pci_name(dev),
+ pos, (res->flags & IORESOURCE_IO) ? "io port":"32bit mmio",
+ (unsigned long long)res->start, (unsigned long long)res->end);
}
out:
res->start = base;
if (!res->end)
res->end = limit + 0xfff;
- printk(KERN_INFO "PCI: bridge %s io port: [%llx, %llx]\n", pci_name(dev), res->start, res->end);
+ printk(KERN_DEBUG "PCI: bridge %s io port: [%llx, %llx]\n",
+ pci_name(dev), (unsigned long long) res->start,
+ (unsigned long long) res->end);
}
res = child->resource[1];
res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM;
res->start = base;
res->end = limit + 0xfffff;
- printk(KERN_INFO "PCI: bridge %s 32bit mmio: [%llx, %llx]\n", pci_name(dev), res->start, res->end);
+ printk(KERN_DEBUG "PCI: bridge %s 32bit mmio: [%llx, %llx]\n",
+ pci_name(dev), (unsigned long long) res->start,
+ (unsigned long long) res->end);
}
res = child->resource[2];
res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM | IORESOURCE_PREFETCH;
res->start = base;
res->end = limit + 0xfffff;
- printk(KERN_INFO "PCI: bridge %s %sbit mmio pref: [%llx, %llx]\n", pci_name(dev), (res->flags & PCI_PREF_RANGE_TYPE_64)?"64":"32",res->start, res->end);
+ printk(KERN_DEBUG "PCI: bridge %s %sbit mmio pref: [%llx, %llx]\n",
+ pci_name(dev), (res->flags & PCI_PREF_RANGE_TYPE_64) ? "64" : "32",
+ (unsigned long long) res->start, (unsigned long long) res->end);
}
}
* time.
*/
struct pci_dev *pci_find_device(unsigned int vendor, unsigned int device,
- const struct pci_dev *from)
+ struct pci_dev *from)
{
struct pci_dev *pdev;
* this file.
*/
static struct pci_dev *pci_get_dev_by_id(const struct pci_device_id *id,
- const struct pci_dev *from)
+ struct pci_dev *from)
{
struct device *dev;
struct device *dev_start = NULL;
*/
struct pci_dev *pci_get_subsys(unsigned int vendor, unsigned int device,
unsigned int ss_vendor, unsigned int ss_device,
- const struct pci_dev *from)
+ struct pci_dev *from)
{
struct pci_dev *pdev;
struct pci_device_id *id;
if (!res)
continue;
- printk(KERN_INFO "bus: %02x index %x %s: [%llx, %llx]\n", bus->number, i, (res->flags & IORESOURCE_IO)? "io port":"mmio", res->start, res->end);
+ printk(KERN_INFO "bus: %02x index %x %s: [%llx, %llx]\n",
+ bus->number, i,
+ (res->flags & IORESOURCE_IO) ? "io port" : "mmio",
+ (unsigned long long) res->start,
+ (unsigned long long) res->end);
}
}
p_drv = to_pcmcia_drv(dev->driver);
s = p_dev->socket;
+ /* The PCMCIA code passes the match data in via dev->driver_data
+ * which is an ugly hack. Once the driver probe is called it may
+ * and often will overwrite the match data so we must save it first
+ *
+ * handle pseudo multifunction devices:
+ * there are at most two pseudo multifunction devices.
+ * if we're matching against the first, schedule a
+ * call which will then check whether there are two
+ * pseudo devices, and if not, add the second one.
+ */
+ did = p_dev->dev.driver_data;
+
ds_dbg(1, "trying to bind %s to %s\n", p_dev->dev.bus_id,
p_drv->drv.name);
goto put_module;
}
- /* handle pseudo multifunction devices:
- * there are at most two pseudo multifunction devices.
- * if we're matching against the first, schedule a
- * call which will then check whether there are two
- * pseudo devices, and if not, add the second one.
- */
- did = p_dev->dev.driver_data;
if (did && (did->match_flags & PCMCIA_DEV_ID_MATCH_DEVICE_NO) &&
(p_dev->socket->device_count == 1) && (p_dev->device_no == 0))
pcmcia_add_device_later(p_dev->socket, 0);
- put_module:
+put_module:
if (ret)
module_put(p_drv->owner);
- put_dev:
+put_dev:
if (ret)
put_device(dev);
return (ret);
add_timer(&skt->poll_timer);
- device_create_file(&skt->socket.dev, &dev_attr_status);
+ ret = device_create_file(&skt->socket.dev, &dev_attr_status);
+ if (ret)
+ goto out_err_8;
}
dev_set_drvdata(dev, sinfo);
do {
skt = &sinfo->skt[i];
+ device_remove_file(&skt->socket.dev, &dev_attr_status);
+ out_err_8:
del_timer_sync(&skt->poll_timer);
pcmcia_unregister_socket(&skt->socket);
for (i = 0; i < gdev->count; i++) {
if (gdev->cdev[i]) {
- dev_set_drvdata(&gdev->cdev[i]->dev, NULL);
+ if (dev_get_drvdata(&gdev->cdev[i]->dev) == gdev)
+ dev_set_drvdata(&gdev->cdev[i]->dev, NULL);
put_device(&gdev->cdev[i]->dev);
}
}
if (dev_get_drvdata(&gdev->cdev[i]->dev) == gdev)
dev_set_drvdata(&gdev->cdev[i]->dev, NULL);
put_device(&gdev->cdev[i]->dev);
+ gdev->cdev[i] = NULL;
}
mutex_unlock(&gdev->reg_mutex);
put_device(&gdev->dev);
CIO_TRACE_EVENT(4, sch->dev.bus_id);
orb = &to_io_private(sch)->orb;
+ memset(orb, 0, sizeof(union orb));
/* sch is always under 2G. */
orb->cmd.intparm = (u32)(addr_t)sch;
orb->cmd.fmt = 1;
struct atmel_uart_port {
struct uart_port uart; /* uart */
struct clk *clk; /* uart clock */
- unsigned short suspended; /* is port suspended? */
+ int may_wakeup; /* cached value of device_may_wakeup for times we need to disable it */
+ u32 backup_imr; /* IMR saved during suspend */
int break_active; /* break being received */
short use_dma_rx; /* enable PDC receiver */
* This is called on uart_open() or a resume event.
*/
clk_enable(atmel_port->clk);
+
+ /* re-enable interrupts if we disabled some on suspend */
+ UART_PUT_IER(port, atmel_port->backup_imr);
break;
case 3:
+ /* Back up the interrupt mask and disable all interrupts */
+ atmel_port->backup_imr = UART_GET_IMR(port);
+ UART_PUT_IDR(port, -1);
+
/*
* Disable the peripheral clock for this serial port.
* This is called on uart_close() or a suspend event.
cpu_relax();
}
- if (device_may_wakeup(&pdev->dev)
- && !atmel_serial_clk_will_stop())
- enable_irq_wake(port->irq);
- else {
- uart_suspend_port(&atmel_uart, port);
- atmel_port->suspended = 1;
- }
+ /* we can not wake up if we're running on slow clock */
+ atmel_port->may_wakeup = device_may_wakeup(&pdev->dev);
+ if (atmel_serial_clk_will_stop())
+ device_set_wakeup_enable(&pdev->dev, 0);
+
+ uart_suspend_port(&atmel_uart, port);
return 0;
}
struct uart_port *port = platform_get_drvdata(pdev);
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
- if (atmel_port->suspended) {
- uart_resume_port(&atmel_uart, port);
- atmel_port->suspended = 0;
- } else
- disable_irq_wake(port->irq);
+ uart_resume_port(&atmel_uart, port);
+ device_set_wakeup_enable(&pdev->dev, atmel_port->may_wakeup);
return 0;
}
BUILD_BUG_ON(!is_power_of_2(ATMEL_SERIAL_RINGSIZE));
port = &atmel_ports[pdev->id];
+ port->backup_imr = 0;
+
atmel_init_port(port, pdev);
if (!atmel_use_dma_rx(&port->uart)) {
#define UCR3_RXDSEN (1<<6) /* Receive status interrupt enable */
#define UCR3_AIRINTEN (1<<5) /* Async IR wake interrupt enable */
#define UCR3_AWAKEN (1<<4) /* Async wake interrupt enable */
-#define UCR3_REF25 (1<<3) /* Ref freq 25 MHz */
-#define UCR3_REF30 (1<<2) /* Ref Freq 30 MHz */
+#ifdef CONFIG_ARCH_IMX
+#define UCR3_REF25 (1<<3) /* Ref freq 25 MHz, only on mx1 */
+#define UCR3_REF30 (1<<2) /* Ref Freq 30 MHz, only on mx1 */
+#endif
+#if defined CONFIG_ARCH_MX2 || defined CONFIG_ARCH_MX3
+#define UCR3_RXDMUXSEL (1<<2) /* RXD Muxed Input Select, on mx2/mx3 */
+#endif
#define UCR3_INVT (1<<1) /* Inverted Infrared transmission */
#define UCR3_BPEN (1<<0) /* Preset registers enable */
#define UCR4_CTSTL_32 (32<<10) /* CTS trigger level (32 chars) */
readl(sport->port.membase + UCR1) & UCR1_TXMPTYEN)
imx_txint(irq, dev_id);
- if (sts & USR1_RTSS)
+ if (sts & USR1_RTSD)
imx_rtsint(irq, dev_id);
return IRQ_HANDLED;
temp |= (UCR2_RXEN | UCR2_TXEN);
writel(temp, sport->port.membase + UCR2);
+#if defined CONFIG_ARCH_MX2 || defined CONFIG_ARCH_MX3
+ temp = readl(sport->port.membase + UCR3);
+ temp |= UCR3_RXDMUXSEL;
+ writel(temp, sport->port.membase + UCR3);
+#endif
+
/*
* Enable modem status interrupts
*/
if(pdata && (pdata->flags & IMXUART_HAVE_RTSCTS))
sport->have_rtscts = 1;
- if (pdata->init)
- pdata->init(pdev);
+ if (pdata->init) {
+ ret = pdata->init(pdev);
+ if (ret)
+ goto clkput;
+ }
uart_add_one_port(&imx_reg, &sport->port);
platform_set_drvdata(pdev, &sport->port);
return 0;
+clkput:
+ clk_put(sport->clk);
+ clk_disable(sport->clk);
unmap:
iounmap(sport->port.membase);
free:
#define MAX_BUSES 3
-#define DMA_INT_MASK (DCSR_ENDINTR | DCSR_STARTINTR | DCSR_BUSERR)
-#define RESET_DMA_CHANNEL (DCSR_NODESC | DMA_INT_MASK)
-#define IS_DMA_ALIGNED(x) (((u32)(x)&0x07)==0)
+#define DMA_INT_MASK (DCSR_ENDINTR | DCSR_STARTINTR | DCSR_BUSERR)
+#define RESET_DMA_CHANNEL (DCSR_NODESC | DMA_INT_MASK)
+#define IS_DMA_ALIGNED(x) (((x) & 0x07) == 0)
+#define MAX_DMA_LEN 8191
/*
* for testing SSCR1 changes that require SSP restart, basically
size_t tx_map_len;
u8 n_bytes;
u32 dma_width;
- int cs_change;
int (*write)(struct driver_data *drv_data);
int (*read)(struct driver_data *drv_data);
irqreturn_t (*transfer_handler)(struct driver_data *drv_data);
struct spi_transfer,
transfer_list);
+ /* Delay if requested before any change in chip select */
+ if (last_transfer->delay_usecs)
+ udelay(last_transfer->delay_usecs);
+
+ /* Drop chip select UNLESS cs_change is true or we are returning
+ * a message with an error, or next message is for another chip
+ */
if (!last_transfer->cs_change)
drv_data->cs_control(PXA2XX_CS_DEASSERT);
+ else {
+ struct spi_message *next_msg;
+
+ /* Holding of cs was hinted, but we need to make sure
+ * the next message is for the same chip. Don't waste
+ * time with the following tests unless this was hinted.
+ *
+ * We cannot postpone this until pump_messages, because
+ * after calling msg->complete (below) the driver that
+ * sent the current message could be unloaded, which
+ * could invalidate the cs_control() callback...
+ */
+
+ /* get a pointer to the next message, if any */
+ spin_lock_irqsave(&drv_data->lock, flags);
+ if (list_empty(&drv_data->queue))
+ next_msg = NULL;
+ else
+ next_msg = list_entry(drv_data->queue.next,
+ struct spi_message, queue);
+ spin_unlock_irqrestore(&drv_data->lock, flags);
+
+ /* see if the next and current messages point
+ * to the same chip
+ */
+ if (next_msg && next_msg->spi != msg->spi)
+ next_msg = NULL;
+ if (!next_msg || msg->state == ERROR_STATE)
+ drv_data->cs_control(PXA2XX_CS_DEASSERT);
+ }
msg->state = NULL;
if (msg->complete)
msg->actual_length += drv_data->len -
(drv_data->rx_end - drv_data->rx);
- /* Release chip select if requested, transfer delays are
- * handled in pump_transfers */
- if (drv_data->cs_change)
- drv_data->cs_control(PXA2XX_CS_DEASSERT);
+ /* Transfer delays and chip select release are
+ * handled in pump_transfers or giveback
+ */
/* Move to next transfer */
msg->state = next_transfer(drv_data);
drv_data->cur_msg->actual_length += drv_data->len -
(drv_data->rx_end - drv_data->rx);
- /* Release chip select if requested, transfer delays are
- * handled in pump_transfers */
- if (drv_data->cs_change)
- drv_data->cs_control(PXA2XX_CS_DEASSERT);
+ /* Transfer delays and chip select release are
+ * handled in pump_transfers or giveback
+ */
/* Move to next transfer */
drv_data->cur_msg->state = next_transfer(drv_data);
return;
}
- /* Delay if requested at end of transfer*/
+ /* Delay if requested at end of transfer before CS change */
if (message->state == RUNNING_STATE) {
previous = list_entry(transfer->transfer_list.prev,
struct spi_transfer,
transfer_list);
if (previous->delay_usecs)
udelay(previous->delay_usecs);
+
+ /* Drop chip select only if cs_change is requested */
+ if (previous->cs_change)
+ drv_data->cs_control(PXA2XX_CS_DEASSERT);
}
- /* Check transfer length */
- if (transfer->len > 8191)
- {
- dev_warn(&drv_data->pdev->dev, "pump_transfers: transfer "
- "length greater than 8191\n");
- message->status = -EINVAL;
- giveback(drv_data);
- return;
+ /* Check for transfers that need multiple DMA segments */
+ if (transfer->len > MAX_DMA_LEN && chip->enable_dma) {
+
+ /* reject already-mapped transfers; PIO won't always work */
+ if (message->is_dma_mapped
+ || transfer->rx_dma || transfer->tx_dma) {
+ dev_err(&drv_data->pdev->dev,
+ "pump_transfers: mapped transfer length "
+ "of %lu is greater than %d\n",
+ transfer->len, MAX_DMA_LEN);
+ message->status = -EINVAL;
+ giveback(drv_data);
+ return;
+ }
+
+ /* warn ... we force this to PIO mode */
+ if (printk_ratelimit())
+ dev_warn(&message->spi->dev, "pump_transfers: "
+ "DMA disabled for transfer length %ld "
+ "greater than %d\n",
+ (long)drv_data->len, MAX_DMA_LEN);
}
/* Setup the transfer state based on the type of transfer */
drv_data->len = transfer->len & DCMD_LENGTH;
drv_data->write = drv_data->tx ? chip->write : null_writer;
drv_data->read = drv_data->rx ? chip->read : null_reader;
- drv_data->cs_change = transfer->cs_change;
/* Change speed and bit per word on a per transfer */
cr0 = chip->cr0;
&dma_thresh))
if (printk_ratelimit())
dev_warn(&message->spi->dev,
- "pump_transfer: "
+ "pump_transfers: "
"DMA burst size reduced to "
"match bits_per_word\n");
}
message->state = RUNNING_STATE;
- /* Try to map dma buffer and do a dma transfer if successful */
- if ((drv_data->dma_mapped = map_dma_buffers(drv_data))) {
+ /* Try to map dma buffer and do a dma transfer if successful, but
+ * only if the length is non-zero and less than MAX_DMA_LEN.
+ *
+ * Zero-length non-descriptor DMA is illegal on PXA2xx; force use
+ * of PIO instead. Care is needed above because the transfer may
+ * have have been passed with buffers that are already dma mapped.
+ * A zero-length transfer in PIO mode will not try to write/read
+ * to/from the buffers
+ *
+ * REVISIT large transfers are exactly where we most want to be
+ * using DMA. If this happens much, split those transfers into
+ * multiple DMA segments rather than forcing PIO.
+ */
+ drv_data->dma_mapped = 0;
+ if (drv_data->len > 0 && drv_data->len <= MAX_DMA_LEN)
+ drv_data->dma_mapped = map_dma_buffers(drv_data);
+ if (drv_data->dma_mapped) {
/* Ensure we have the correct interrupt handler */
drv_data->transfer_handler = dma_transfer;
cs->hw_mode |= SPMODE_LEN(bits_per_word);
if ((mpc83xx_spi->spibrg / hz) > 64) {
+ cs->hw_mode |= SPMODE_DIV16;
pm = mpc83xx_spi->spibrg / (hz * 64);
if (pm > 16) {
- cs->hw_mode |= SPMODE_DIV16;
- pm /= 16;
- if (pm > 16) {
- dev_err(&spi->dev, "Requested speed is too "
- "low: %d Hz. Will use %d Hz instead.\n",
- hz, mpc83xx_spi->spibrg / 1024);
- pm = 16;
- }
+ dev_err(&spi->dev, "Requested speed is too "
+ "low: %d Hz. Will use %d Hz instead.\n",
+ hz, mpc83xx_spi->spibrg / 1024);
+ pm = 16;
}
} else
pm = mpc83xx_spi->spibrg / (hz * 4);
if (t->bits_per_word)
bits_per_word = t->bits_per_word;
len = t->len;
- if (bits_per_word > 8)
+ if (bits_per_word > 8) {
+ /* invalid length? */
+ if (len & 1)
+ return -EINVAL;
len /= 2;
- if (bits_per_word > 16)
+ }
+ if (bits_per_word > 16) {
+ /* invalid length? */
+ if (len & 1)
+ return -EINVAL;
len /= 2;
+ }
mpc83xx_spi->count = len;
+
INIT_COMPLETION(mpc83xx_spi->done);
/* enable rx ints */
#endif
MODULE_ALIAS("platform:s3c2410-spi");
-static struct platform_driver s3c24xx_spidrv = {
+static struct platform_driver s3c24xx_spi_driver = {
.remove = __exit_p(s3c24xx_spi_remove),
.suspend = s3c24xx_spi_suspend,
.resume = s3c24xx_spi_resume,
static int __init s3c24xx_spi_init(void)
{
- return platform_driver_probe(&s3c24xx_spidrv, s3c24xx_spi_probe);
+ return platform_driver_probe(&s3c24xx_spi_driver, s3c24xx_spi_probe);
}
static void __exit s3c24xx_spi_exit(void)
{
- platform_driver_unregister(&s3c24xx_spidrv);
+ platform_driver_unregister(&s3c24xx_spi_driver);
}
module_init(s3c24xx_spi_init);
* with IRQF_SHARED. As usb_hcd_irq() will always disable
* interrupts we can remove it here.
*/
- irqflags &= ~IRQF_DISABLED;
+ if (irqflags & IRQF_SHARED)
+ irqflags &= ~IRQF_DISABLED;
snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d",
hcd->driver->description, hcd->self.busnum);
USB_PORT_STAT_C_ENABLE);
#endif
- /* Try to use the debounce delay for protection against
- * port-enable changes caused, for example, by EMI.
- */
- if (portchange & (USB_PORT_STAT_C_CONNECTION |
- USB_PORT_STAT_C_ENABLE)) {
- status = hub_port_debounce(hub, port1);
- if (status < 0) {
- if (printk_ratelimit())
- dev_err (hub_dev, "connect-debounce failed, "
- "port %d disabled\n", port1);
- portstatus &= ~USB_PORT_STAT_CONNECTION;
- } else {
- portstatus = status;
- }
- }
-
/* Try to resuscitate an existing device */
udev = hdev->children[port1-1];
if ((portstatus & USB_PORT_STAT_CONNECTION) && udev &&
udev->state != USB_STATE_NOTATTACHED) {
-
usb_lock_device(udev);
if (portstatus & USB_PORT_STAT_ENABLE) {
status = 0; /* Nothing to do */
- } else if (!udev->persist_enabled) {
- status = -ENODEV; /* Mustn't resuscitate */
#ifdef CONFIG_USB_SUSPEND
- } else if (udev->state == USB_STATE_SUSPENDED) {
+ } else if (udev->state == USB_STATE_SUSPENDED &&
+ udev->persist_enabled) {
/* For a suspended device, treat this as a
* remote wakeup event.
*/
#endif
} else {
- status = usb_reset_device(udev);
+ status = -ENODEV; /* Don't resuscitate */
}
usb_unlock_device(udev);
usb_disconnect(&hdev->children[port1-1]);
clear_bit(port1, hub->change_bits);
+ if (portchange & (USB_PORT_STAT_C_CONNECTION |
+ USB_PORT_STAT_C_ENABLE)) {
+ status = hub_port_debounce(hub, port1);
+ if (status < 0) {
+ if (printk_ratelimit())
+ dev_err(hub_dev, "connect-debounce failed, "
+ "port %d disabled\n", port1);
+ portstatus &= ~USB_PORT_STAT_CONNECTION;
+ } else {
+ portstatus = status;
+ }
+ }
+
/* Return now if debouncing failed or nothing is connected */
if (!(portstatus & USB_PORT_STAT_CONNECTION)) {
if ((wHubCharacteristics & HUB_CHAR_LPSM) < 2
&& !(portstatus & (1 << USB_PORT_FEAT_POWER)))
set_port_feature(hdev, port1, USB_PORT_FEAT_POWER);
-
+
if (portstatus & USB_PORT_STAT_ENABLE)
goto done;
return;
fsl_writel(tmp, &dr_regs->endpointlistaddr);
VDBG("vir[qh_base] is %p phy[qh_base] is 0x%8x reg is 0x%8x",
- (int)udc->ep_qh, (int)tmp,
+ udc->ep_qh, (int)tmp,
fsl_readl(&dr_regs->endpointlistaddr));
/* Config PHY interface */
omap_set_dma_dest_params(ep->lch,
OMAP_DMA_PORT_TIPB,
OMAP_DMA_AMODE_CONSTANT,
- (unsigned long) io_v2p(UDC_DATA_DMA),
+ UDC_DATA_DMA,
0, 0);
}
} else {
omap_set_dma_src_params(ep->lch,
OMAP_DMA_PORT_TIPB,
OMAP_DMA_AMODE_CONSTANT,
- (unsigned long) io_v2p(UDC_DATA_DMA),
+ UDC_DATA_DMA,
0, 0);
/* EMIFF or SDRC */
omap_set_dma_dest_burst_mode(ep->lch,
return -ETIMEDOUT;
}
-static int handshake_on_error_set_halt(struct ehci_hcd *ehci, void __iomem *ptr,
- u32 mask, u32 done, int usec)
-{
- int error = handshake(ehci, ptr, mask, done, usec);
- if (error)
- ehci_to_hcd(ehci)->state = HC_STATE_HALT;
-
- return error;
-}
-
/* force HC to halt state from unknown (EHCI spec section 2.3) */
static int ehci_halt (struct ehci_hcd *ehci)
{
STS_HALT, STS_HALT, 16 * 125);
}
+static int handshake_on_error_set_halt(struct ehci_hcd *ehci, void __iomem *ptr,
+ u32 mask, u32 done, int usec)
+{
+ int error;
+
+ error = handshake(ehci, ptr, mask, done, usec);
+ if (error) {
+ ehci_halt(ehci);
+ ehci_to_hcd(ehci)->state = HC_STATE_HALT;
+ ehci_err(ehci, "force halt; handhake %p %08x %08x -> %d\n",
+ ptr, mask, done, error);
+ }
+
+ return error;
+}
+
/* put TDI/ARC silicon into EHCI mode */
static void tdi_reset (struct ehci_hcd *ehci)
{
u32 cmd;
int status;
+ if (ehci->periodic_sched++)
+ return 0;
+
/* did clearing PSE did take effect yet?
* takes effect only at frame boundaries...
*/
u32 cmd;
int status;
+ if (--ehci->periodic_sched)
+ return 0;
+
/* did setting PSE not take effect yet?
* takes effect only at frame boundaries...
*/
: (qh->usecs * 8);
/* maybe enable periodic schedule processing */
- if (!ehci->periodic_sched++)
- return enable_periodic (ehci);
-
- return 0;
+ return enable_periodic(ehci);
}
-static void qh_unlink_periodic (struct ehci_hcd *ehci, struct ehci_qh *qh)
+static int qh_unlink_periodic(struct ehci_hcd *ehci, struct ehci_qh *qh)
{
unsigned i;
unsigned period;
qh_put (qh);
/* maybe turn off periodic schedule */
- ehci->periodic_sched--;
- if (!ehci->periodic_sched)
- (void) disable_periodic (ehci);
+ return disable_periodic(ehci);
}
static void intr_deschedule (struct ehci_hcd *ehci, struct ehci_qh *qh)
urb->hcpriv = NULL;
timer_action (ehci, TIMER_IO_WATCHDOG);
- if (unlikely (!ehci->periodic_sched++))
- return enable_periodic (ehci);
- return 0;
+ return enable_periodic(ehci);
}
#define ISO_ERRS (EHCI_ISOC_BUF_ERR | EHCI_ISOC_BABBLE | EHCI_ISOC_XACTERR)
ehci_urb_done(ehci, urb, 0);
retval = true;
urb = NULL;
- ehci->periodic_sched--;
+ (void) disable_periodic(ehci);
ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs--;
if (unlikely (list_empty (&stream->td_list))) {
urb->hcpriv = NULL;
timer_action (ehci, TIMER_IO_WATCHDOG);
- if (!ehci->periodic_sched++)
- return enable_periodic (ehci);
- return 0;
+ return enable_periodic(ehci);
}
/*-------------------------------------------------------------------------*/
ehci_urb_done(ehci, urb, 0);
retval = true;
urb = NULL;
- ehci->periodic_sched--;
+ (void) disable_periodic(ehci);
ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs--;
if (list_empty (&stream->td_list)) {
if (unlikely (modified)) {
if (likely(ehci->periodic_sched > 0))
goto restart;
- /* maybe we can short-circuit this scan! */
- disable_periodic(ehci);
+ /* short-circuit this scan */
now_uframe = clock;
break;
}
# (M)HDRC = (Multipoint) Highspeed Dual-Role Controller
config USB_MUSB_HDRC
depends on (USB || USB_GADGET) && HAVE_CLK
+ depends on !SUPERH
select TWL4030_USB if MACH_OMAP_3430SDP
tristate 'Inventra Highspeed Dual Role Controller (TI, ...)'
help
#include <linux/io.h>
#ifdef CONFIG_ARM
-#include <asm/arch/hardware.h>
-#include <asm/arch/memory.h>
+#include <mach/hardware.h>
+#include <mach/memory.h>
#include <asm/mach-types.h>
#endif
#include <linux/io.h>
#include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/mux.h>
+#include <mach/hardware.h>
+#include <mach/mux.h>
#include "musb_core.h"
#include "omap2430.h"
#define __MUSB_OMAP243X_H__
#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430)
-#include <asm/arch/hardware.h>
-#include <asm/arch/usb.h>
+#include <mach/hardware.h>
+#include <mach/usb.h>
/*
* OMAP2430-specific definitions
{ USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */
{ USB_DEVICE(0x10C4, 0x80DD) }, /* Tracient RFID */
{ USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */
+ { USB_DEVICE(0x10C4, 0x8115) }, /* Arygon NFC/Mifare Reader */
{ USB_DEVICE(0x10C4, 0x813D) }, /* Burnside Telecom Deskmobile */
{ USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */
{ USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */
{ USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */
{ USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */
{ USB_DEVICE(0x10c4, 0x8293) }, /* Telegesys ETRX2USB */
+ { USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */
{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
{ USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
{ USB_DEVICE(0x10C4, 0xF001) }, /* Elan Digital Systems USBscope50 */
{ USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */
{ USB_DEVICE(0x166A, 0x0303) }, /* Clipsal 5500PCU C-Bus USB interface */
{ USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */
+ { USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
{ } /* Terminating Entry */
};
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) },
{ USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) },
+ { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO4x4_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DGQG_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) },
{ }, /* Optional parameter entry */
{ } /* Terminating entry */
};
#define PAPOUCH_VID 0x5050 /* Vendor ID */
#define PAPOUCH_TMU_PID 0x0400 /* TMU USB Thermometer */
+#define PAPOUCH_QUIDO4x4_PID 0x0900 /* Quido 4/4 Module */
/*
* ACG Identification Technologies GmbH products (http://www.acg.de/).
/* Rig Expert Ukraine devices */
#define FTDI_REU_TINY_PID 0xED22 /* RigExpert Tiny */
+/* Domintell products http://www.domintell.com */
+#define FTDI_DOMINTELL_DGQG_PID 0xEF50 /* Master */
+#define FTDI_DOMINTELL_DUSB_PID 0xEF51 /* DUSB01 module */
+
/* Commands */
#define FTDI_SIO_RESET 0 /* Reset the port */
#define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */
/* ZTE PRODUCTS */
#define ZTE_VENDOR_ID 0x19d2
#define ZTE_PRODUCT_MF628 0x0015
+#define ZTE_PRODUCT_CDMA_TECH 0xfffe
static struct usb_device_id option_ids[] = {
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
{ USB_DEVICE(MAXON_VENDOR_ID, 0x6280) }, /* BP3-USB & BP3-EXT HSDPA */
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) },
{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628) },
+ { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);
Whom based his on the Keyspan driver by Hugh Blemings <hugh@blemings.org>
*/
-#define DRIVER_VERSION "v.1.2.13a"
+#define DRIVER_VERSION "v.1.3.2"
#define DRIVER_AUTHOR "Kevin Lloyd <klloyd@sierrawireless.com>"
#define DRIVER_DESC "USB Driver for Sierra Wireless USB modems"
#define SWIMS_USB_REQUEST_SetPower 0x00
#define SWIMS_USB_REQUEST_SetNmea 0x07
-#define SWIMS_USB_REQUEST_SetMode 0x0B
-#define SWIMS_USB_REQUEST_GetSwocInfo 0x0A
-#define SWIMS_SET_MODE_Modem 0x0001
/* per port private data */
#define N_IN_URB 4
{ USB_DEVICE(0x1199, 0x0017) }, /* Sierra Wireless EM5625 */
{ USB_DEVICE(0x1199, 0x0018) }, /* Sierra Wireless MC5720 */
{ USB_DEVICE(0x1199, 0x0218) }, /* Sierra Wireless MC5720 */
- { USB_DEVICE(0x0f30, 0x1b1d) }, /* Sierra Wireless MC5720 */
+ { USB_DEVICE(0x03f0, 0x1b1d) }, /* HP ev2200 a.k.a MC5720 */
{ USB_DEVICE(0x1199, 0x0020) }, /* Sierra Wireless MC5725 */
{ USB_DEVICE(0x1199, 0x0024) }, /* Sierra Wireless MC5727 */
{ USB_DEVICE(0x1199, 0x0220) }, /* Sierra Wireless MC5725 */
/* Sierra Wireless Device */
{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x0025, 0xFF, 0xFF, 0xFF) },
{ USB_DEVICE(0x1199, 0x0026) }, /* Sierra Wireless Device */
+ { USB_DEVICE(0x1199, 0x0027) }, /* Sierra Wireless Device */
+ { USB_DEVICE(0x1199, 0x0028) }, /* Sierra Wireless Device */
{ USB_DEVICE(0x1199, 0x6802) }, /* Sierra Wireless MC8755 */
{ USB_DEVICE(0x1199, 0x6804) }, /* Sierra Wireless MC8755 */
{ USB_DEVICE(0x1199, 0x6821) }, /* Sierra Wireless AirCard 875U */
{ USB_DEVICE(0x1199, 0x6832) }, /* Sierra Wireless MC8780 */
{ USB_DEVICE(0x1199, 0x6833) }, /* Sierra Wireless MC8781 */
+ { USB_DEVICE(0x1199, 0x683A) }, /* Sierra Wireless MC8785 */
{ USB_DEVICE(0x1199, 0x683B) }, /* Sierra Wireless MC8785 Composite */
{ USB_DEVICE(0x1199, 0x683C) }, /* Sierra Wireless MC8790 */
{ USB_DEVICE(0x1199, 0x683D) }, /* Sierra Wireless MC8790 */
/* Sierra Wireless Device */
{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6890, 0xFF, 0xFF, 0xFF)},
/* Sierra Wireless Device */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6891, 0xFF, 0xFF, 0xFF)},
+ /* Sierra Wireless Device */
{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6892, 0xFF, 0xFF, 0xFF)},
{ USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless AirCard 580 */
if (buffer) {
memcpy(buffer, fw_p->data, fw_p->size);
memset(buffer + fw_p->size, 0xff, buffer_size - fw_p->size);
- ti_do_download(dev, pipe, buffer, fw_p->size);
+ status = ti_do_download(dev, pipe, buffer, fw_p->size);
kfree(buffer);
}
release_firmware(fw_p);
((le16_to_cpu(dev->descriptor.idVendor) == ATEN_VENDOR_ID) &&
(le16_to_cpu(dev->descriptor.idProduct) == ATEN_PRODUCT_ID)) ||
((le16_to_cpu(dev->descriptor.idVendor) == ALCOR_VENDOR_ID) &&
- (le16_to_cpu(dev->descriptor.idProduct) == ALCOR_PRODUCT_ID))) {
+ (le16_to_cpu(dev->descriptor.idProduct) == ALCOR_PRODUCT_ID)) ||
+ ((le16_to_cpu(dev->descriptor.idVendor) == SIEMENS_VENDOR_ID) &&
+ (le16_to_cpu(dev->descriptor.idProduct) == SIEMENS_PRODUCT_ID_EF81))) {
if (interface != dev->actconfig->interface[0]) {
/* check out the endpoints of the other interface*/
iface_desc = dev->actconfig->interface[0]->cur_altsetting;
on the resulting scsi device node returns the Karma to normal
operation.
-config USB_STORAGE_SIERRA
- bool "Sierra Wireless TRU-Install Feature Support"
- depends on USB_STORAGE
- help
- Say Y here to include additional code to support Sierra Wireless
- products with the TRU-Install feature (e.g., AC597E, AC881U).
-
- This code switches the Sierra Wireless device from being in
- Mass Storage mode to Modem mode. It also has the ability to
- support host software upgrades should full Linux support be added
- to TRU-Install.
-
config USB_STORAGE_CYPRESS_ATACB
bool "SAT emulation on Cypress USB/ATA Bridge with ATACB"
depends on USB_STORAGE
usb-storage-obj-$(CONFIG_USB_STORAGE_ALAUDA) += alauda.o
usb-storage-obj-$(CONFIG_USB_STORAGE_ONETOUCH) += onetouch.o
usb-storage-obj-$(CONFIG_USB_STORAGE_KARMA) += karma.o
-usb-storage-obj-$(CONFIG_USB_STORAGE_SIERRA) += sierra_ms.o
usb-storage-obj-$(CONFIG_USB_STORAGE_CYPRESS_ATACB) += cypress_atacb.o
usb-storage-objs := scsiglue.o protocol.o transport.o usb.o \
- initializers.o $(usb-storage-obj-y)
+ initializers.o sierra_ms.o $(usb-storage-obj-y)
ifneq ($(CONFIG_USB_LIBUSUAL),)
obj-$(CONFIG_USB) += libusual.o
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_MAX_SECTORS_64 ),
+/* Reported by Filip Joelsson <filip@blueturtle.nu> */
+UNUSUAL_DEV( 0x0421, 0x005d, 0x0001, 0x0600,
+ "Nokia",
+ "Nokia 3110c",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY ),
+
/* Reported by Mario Rettig <mariorettig@web.de> */
UNUSUAL_DEV( 0x0421, 0x042e, 0x0100, 0x0100,
"Nokia",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY ),
+/* Reported by Richard Nauber <RichardNauber@web.de> */
+UNUSUAL_DEV( 0x0421, 0x04fa, 0x0601, 0x0601,
+ "Nokia",
+ "6300",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY ),
+
+/* Patch for Nokia 5310 capacity */
+UNUSUAL_DEV( 0x0421, 0x006a, 0x0000, 0x0591,
+ "Nokia",
+ "5310",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY ),
+
/* Reported by Olaf Hering <olh@suse.de> from novell bug #105878 */
UNUSUAL_DEV( 0x0424, 0x0fdc, 0x0210, 0x0210,
"SMSC",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY ),
+/* Reported by Adrian Pilchowiec <adi1981@epf.pl> */
+UNUSUAL_DEV( 0x071b, 0x3203, 0x0000, 0x0000,
+ "RockChip",
+ "MP3",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64),
+
/* Reported by Massimiliano Ghilardi <massimiliano.ghilardi@gmail.com>
* This USB MP3/AVI player device fails and disconnects if more than 128
* sectors (64kB) are read/written in a single command, and may be present
US_SC_DEVICE, US_PR_DEVICE, NULL,
0),
-#ifdef CONFIG_USB_STORAGE_SIERRA
/* Reported by Kevin Lloyd <linux@sierrawireless.com>
* Entry is needed for the initializer function override,
* which instructs the device to load as a modem
"USB MMC Storage",
US_SC_DEVICE, US_PR_DEVICE, sierra_ms_init,
0),
-#endif
/* Reported by Jaco Kroon <jaco@kroon.co.za>
* The usb-storage module found on the Digitech GNX4 (and supposedly other
#ifdef CONFIG_USB_STORAGE_CYPRESS_ATACB
#include "cypress_atacb.h"
#endif
-#ifdef CONFIG_USB_STORAGE_SIERRA
#include "sierra_ms.h"
-#endif
/* Some informational data */
MODULE_AUTHOR("Matthew Dharm <mdharm-usb@one-eyed-alien.net>");
return value;
}
+static void atmel_lcdfb_stop_nowait(struct atmel_lcdfb_info *sinfo)
+{
+ /* Turn off the LCD controller and the DMA controller */
+ lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
+ sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET);
+
+ /* Wait for the LCDC core to become idle */
+ while (lcdc_readl(sinfo, ATMEL_LCDC_PWRCON) & ATMEL_LCDC_BUSY)
+ msleep(10);
+
+ lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0);
+}
+
+static void atmel_lcdfb_stop(struct atmel_lcdfb_info *sinfo)
+{
+ atmel_lcdfb_stop_nowait(sinfo);
+
+ /* Wait for DMA engine to become idle... */
+ while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY)
+ msleep(10);
+}
+
+static void atmel_lcdfb_start(struct atmel_lcdfb_info *sinfo)
+{
+ lcdc_writel(sinfo, ATMEL_LCDC_DMACON, sinfo->default_dmacon);
+ lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
+ (sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET)
+ | ATMEL_LCDC_PWR);
+}
+
static void atmel_lcdfb_update_dma(struct fb_info *info,
struct fb_var_screeninfo *var)
{
{
might_sleep();
- /* LCD power off */
- lcdc_writel(sinfo, ATMEL_LCDC_PWRCON, sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET);
-
- /* wait for the LCDC core to become idle */
- while (lcdc_readl(sinfo, ATMEL_LCDC_PWRCON) & ATMEL_LCDC_BUSY)
- msleep(10);
-
- /* DMA disable */
- lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0);
-
- /* wait for DMA engine to become idle */
- while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY)
- msleep(10);
-
- /* LCD power on */
- lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
- (sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET) | ATMEL_LCDC_PWR);
-
- /* DMA enable */
- lcdc_writel(sinfo, ATMEL_LCDC_DMACON, sinfo->default_dmacon);
+ atmel_lcdfb_stop(sinfo);
+ atmel_lcdfb_start(sinfo);
}
/**
info->var.xres, info->var.yres,
info->var.xres_virtual, info->var.yres_virtual);
- /* Turn off the LCD controller and the DMA controller */
- lcdc_writel(sinfo, ATMEL_LCDC_PWRCON, sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET);
-
- /* Wait for the LCDC core to become idle */
- while (lcdc_readl(sinfo, ATMEL_LCDC_PWRCON) & ATMEL_LCDC_BUSY)
- msleep(10);
-
- lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0);
+ atmel_lcdfb_stop_nowait(sinfo);
if (info->var.bits_per_pixel == 1)
info->fix.visual = FB_VISUAL_MONO01;
while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY)
msleep(10);
- dev_dbg(info->device, " * re-enable DMA engine\n");
- /* ...and enable it with updated configuration */
- lcdc_writel(sinfo, ATMEL_LCDC_DMACON, sinfo->default_dmacon);
-
- dev_dbg(info->device, " * re-enable LCDC core\n");
- lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
- (sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET) | ATMEL_LCDC_PWR);
+ atmel_lcdfb_start(sinfo);
dev_dbg(info->device, " * DONE\n");
struct fb_info *info = platform_get_drvdata(pdev);
struct atmel_lcdfb_info *sinfo = info->par;
+ /*
+ * We don't want to handle interrupts while the clock is
+ * stopped. It may take forever.
+ */
+ lcdc_writel(sinfo, ATMEL_LCDC_IDR, ~0UL);
+
sinfo->saved_lcdcon = lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_VAL);
lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, 0);
if (sinfo->atmel_lcdfb_power_control)
sinfo->atmel_lcdfb_power_control(0);
+
+ atmel_lcdfb_stop(sinfo);
atmel_lcdfb_stop_clock(sinfo);
+
return 0;
}
struct atmel_lcdfb_info *sinfo = info->par;
atmel_lcdfb_start_clock(sinfo);
+ atmel_lcdfb_start(sinfo);
if (sinfo->atmel_lcdfb_power_control)
sinfo->atmel_lcdfb_power_control(1);
lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, sinfo->saved_lcdcon);
+
+ /* Enable FIFO & DMA errors */
+ lcdc_writel(sinfo, ATMEL_LCDC_IER, ATMEL_LCDC_UFLWI
+ | ATMEL_LCDC_OWRI | ATMEL_LCDC_MERI);
+
return 0;
}
return len;
}
-static int geodewdt_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
+static long geodewdt_ioctl(struct file *file, unsigned int cmd,
+ unsigned long arg)
{
void __user *argp = (void __user *)arg;
int __user *p = argp;
.owner = THIS_MODULE,
.llseek = no_llseek,
.write = geodewdt_write,
- .ioctl = geodewdt_ioctl,
+ .unlocked_ioctl = geodewdt_ioctl,
.open = geodewdt_open,
.release = geodewdt_release,
};
outb(reg & ~asr_toggle_mask, asr_write_addr);
reg = inb(asr_read_addr);
- spin_unlock(&asr_lock);
}
static void asr_toggle(void)
.identity = "PNX4008 Watchdog",
};
-static long pnx4008_wdt_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
+static long pnx4008_wdt_ioctl(struct file *file, unsigned int cmd,
+ unsigned long arg)
{
int ret = -ENOTTY;
int time;
return 0;
}
-static int rc32434_wdt_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
+static long rc32434_wdt_ioctl(struct file *file, unsigned int cmd,
+ unsigned long arg)
{
void __user *argp = (void __user *)arg;
int new_timeout;
.owner = THIS_MODULE,
.llseek = no_llseek,
.write = rc32434_wdt_write,
- .ioctl = rc32434_wdt_ioctl,
+ .unlocked_ioctl = rc32434_wdt_ioctl,
.open = rc32434_wdt_open,
.release = rc32434_wdt_release,
};
return 0;
}
-static int rdc321x_wdt_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
+static long rdc321x_wdt_ioctl(struct file *file, unsigned int cmd,
+ unsigned long arg)
{
void __user *argp = (void __user *)arg;
unsigned int value;
static const struct file_operations rdc321x_wdt_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
- .ioctl = rdc321x_wdt_ioctl,
+ .unlocked_ioctl = rdc321x_wdt_ioctl,
.open = rdc321x_wdt_open,
.write = rdc321x_wdt_write,
.release = rdc321x_wdt_release,
return 0;
}
-static ssize_t watchdog_write(struct file *file, const char *data,
- size_t len, loff_t *ppos)
+static ssize_t watchdog_write(struct file *file, const char __user *data,
+ size_t len, loff_t *ppos)
{
/*
* Refresh the timer.
};
static long watchdog_ioctl(struct file *file, unsigned int cmd,
- unsigned long arg)
+ unsigned long arg)
{
unsigned int new_margin;
+ int __user *int_arg = (int __user *)arg;
int ret = -ENOTTY;
switch (cmd) {
case WDIOC_GETSUPPORT:
ret = 0;
- if (copy_to_user((void *)arg, &ident, sizeof(ident)))
+ if (copy_to_user((void __user *)arg, &ident, sizeof(ident)))
ret = -EFAULT;
break;
case WDIOC_GETSTATUS:
case WDIOC_GETBOOTSTATUS:
- ret = put_user(0, (int *)arg);
+ ret = put_user(0, int_arg);
break;
case WDIOC_KEEPALIVE:
break;
case WDIOC_SETTIMEOUT:
- ret = get_user(new_margin, (int *)arg);
+ ret = get_user(new_margin, int_arg);
if (ret)
break;
watchdog_ping();
/* Fall */
case WDIOC_GETTIMEOUT:
- ret = put_user(soft_margin, (int *)arg);
+ ret = put_user(soft_margin, int_arg);
break;
}
return ret;
return NULL;
error:
- if (fid)
- p9_client_clunk(fid);
+ p9_client_clunk(fid);
return ERR_PTR(result);
}
inode->i_ino);
if (err) {
inode_dec_link_count(inode);
- iput(inode);
mutex_unlock(&info->bfs_lock);
+ iput(inode);
return err;
}
mutex_unlock(&info->bfs_lock);
if (dentry->d_parent != parent)
goto next;
+ /* non-existing due to RCU? */
+ if (d_unhashed(dentry))
+ goto next;
+
/*
* It is safe to compare names since d_move() cannot
* change the qstr (protected by d_lock).
goto next;
}
- if (!d_unhashed(dentry)) {
- atomic_inc(&dentry->d_count);
- found = dentry;
- }
+ atomic_inc(&dentry->d_count);
+ found = dentry;
spin_unlock(&dentry->d_lock);
break;
next:
if (!size)
continue;
if (from + size > get_capacity(disk)) {
- printk(KERN_ERR " %s: p%d exceeds device capacity\n",
+ printk(KERN_WARNING
+ "%s: p%d exceeds device capacity\n",
disk->disk_name, p);
- continue;
}
res = add_partition(disk, p, from, size, state->parts[p].flags);
if (res) {
for (tmp = dir->subdir; tmp; tmp = tmp->next)
if (strcmp(tmp->name, dp->name) == 0) {
- printk(KERN_WARNING "proc_dir_entry '%s' already "
- "registered\n", dp->name);
+ printk(KERN_WARNING "proc_dir_entry '%s/%s' already registered\n",
+ dir->name, dp->name);
dump_stack();
break;
}
"SReclaimable: %8lu kB\n"
"SUnreclaim: %8lu kB\n"
"PageTables: %8lu kB\n"
+#ifdef CONFIG_QUICKLIST
+ "Quicklists: %8lu kB\n"
+#endif
"NFS_Unstable: %8lu kB\n"
"Bounce: %8lu kB\n"
"WritebackTmp: %8lu kB\n"
"Committed_AS: %8lu kB\n"
"VmallocTotal: %8lu kB\n"
"VmallocUsed: %8lu kB\n"
- "VmallocChunk: %8lu kB\n"
- "Quicklists: %8lu kB\n",
+ "VmallocChunk: %8lu kB\n",
K(i.totalram),
K(i.freeram),
K(i.bufferram),
K(global_page_state(NR_SLAB_RECLAIMABLE)),
K(global_page_state(NR_SLAB_UNRECLAIMABLE)),
K(global_page_state(NR_PAGETABLE)),
+#ifdef CONFIG_QUICKLIST
+ K(quicklist_total_size()),
+#endif
K(global_page_state(NR_UNSTABLE_NFS)),
K(global_page_state(NR_BOUNCE)),
K(global_page_state(NR_WRITEBACK_TEMP)),
K(committed),
(unsigned long)VMALLOC_TOTAL >> 10,
vmi.used >> 10,
- vmi.largest_chunk >> 10,
- K(quicklist_total_size())
+ vmi.largest_chunk >> 10
);
len += hugetlb_report_meminfo(page + len);
printk(KERN_DEBUG "\t%d orphan inode numbers:\n", n);
for (i = 0; i < n; i++)
printk(KERN_DEBUG "\t ino %llu\n",
- le64_to_cpu(orph->inos[i]));
+ (unsigned long long)le64_to_cpu(orph->inos[i]));
break;
}
default:
while (1) {
dbg_gen("feed '%s', ino %llu, new f_pos %#x",
- dent->name, le64_to_cpu(dent->inum),
+ dent->name, (unsigned long long)le64_to_cpu(dent->inum),
key_hash_flash(c, &dent->key));
ubifs_assert(dent->ch.sqnum > ubifs_inode(dir)->creat_sqnum);
rsvd_idx_lebs = 0;
lebs = c->lst.empty_lebs + c->freeable_cnt + c->idx_gc_cnt -
c->lst.taken_empty_lebs;
- ubifs_assert(lebs + c->lst.idx_lebs >= c->min_idx_lebs);
if (rsvd_idx_lebs < lebs)
/*
* OK to allocate an empty LEB, but we still don't want to go
err = move_nodes(c, sleb);
if (err)
- goto out;
+ goto out_inc_seq;
err = gc_sync_wbufs(c);
if (err)
- goto out;
+ goto out_inc_seq;
err = ubifs_change_one_lp(c, lnum, c->leb_size, 0, 0, 0, 0);
if (err)
- goto out;
+ goto out_inc_seq;
/* Allow for races with TNC */
c->gced_lnum = lnum;
out:
ubifs_scan_destroy(sleb);
return err;
+
+out_inc_seq:
+ /* We may have moved at least some nodes so allow for races with TNC */
+ c->gced_lnum = lnum;
+ smp_wmb();
+ c->gc_seq += 1;
+ smp_wmb();
+ goto out;
}
/**
goto out_dereg;
}
+ sprintf(c->bgt_name, BGT_NAME_PATTERN, c->vi.ubi_num, c->vi.vol_id);
if (!mounted_read_only) {
err = alloc_wbufs(c);
if (err)
goto out_cbuf;
/* Create background thread */
- sprintf(c->bgt_name, BGT_NAME_PATTERN, c->vi.ubi_num,
- c->vi.vol_id);
c->bgt = kthread_create(ubifs_bg_thread, c, c->bgt_name);
if (!c->bgt)
c->bgt = ERR_PTR(-EINVAL);
}
err = fallible_read_node(c, key, &zbr, node);
- if (maybe_leb_gced(c, zbr.lnum, gc_seq1)) {
+ if (err <= 0 || maybe_leb_gced(c, zbr.lnum, gc_seq1)) {
/*
* The node may have been GC'ed out from under us so try again
* while keeping the TNC mutex locked.
offset = (xfs_off_t)iblock << inode->i_blkbits;
ASSERT(bh_result->b_size >= (1 << inode->i_blkbits));
size = bh_result->b_size;
+
+ if (!create && direct && offset >= i_size_read(inode))
+ return 0;
+
error = xfs_iomap(XFS_I(inode), offset, size,
create ? flags : BMAPI_READ, &iomap, &niomap);
if (error)
mp->m_flags &= ~XFS_MOUNT_BARRIER;
break;
default:
+ /*
+ * Logically we would return an error here to prevent
+ * users from believing they might have changed
+ * mount options using remount which can't be changed.
+ *
+ * But unfortunately mount(8) adds all options from
+ * mtab and fstab to the mount arguments in some cases
+ * so we can't blindly reject options, but have to
+ * check for each specified option if it actually
+ * differs from the currently set option and only
+ * reject it if that's the case.
+ *
+ * Until that is implemented we return success for
+ * every remount request, and silently ignore all
+ * options that we can't actually change.
+ */
+#if 0
printk(KERN_INFO
"XFS: mount option \"%s\" not supported for remount\n", p);
return -EINVAL;
+#else
+ return 0;
+#endif
}
}
bip->bli_item.li_ops = &xfs_buf_item_ops;
bip->bli_item.li_mountp = mp;
bip->bli_buf = bp;
+ xfs_buf_hold(bp);
bip->bli_format.blf_type = XFS_LI_BUF;
bip->bli_format.blf_blkno = (__int64_t)XFS_BUF_ADDR(bp);
bip->bli_format.blf_len = (ushort)BTOBB(XFS_BUF_COUNT(bp));
return (bip->bli_flags & XFS_BLI_DIRTY);
}
+STATIC void
+xfs_buf_item_free(
+ xfs_buf_log_item_t *bip)
+{
+#ifdef XFS_TRANS_DEBUG
+ kmem_free(bip->bli_orig);
+ kmem_free(bip->bli_logged);
+#endif /* XFS_TRANS_DEBUG */
+
+#ifdef XFS_BLI_TRACE
+ ktrace_free(bip->bli_trace);
+#endif
+ kmem_zone_free(xfs_buf_item_zone, bip);
+}
+
/*
* This is called when the buf log item is no longer needed. It should
* free the buf log item associated with the given buffer and clear
(XFS_BUF_IODONE_FUNC(bp) != NULL)) {
XFS_BUF_CLR_IODONE_FUNC(bp);
}
-
-#ifdef XFS_TRANS_DEBUG
- kmem_free(bip->bli_orig);
- bip->bli_orig = NULL;
- kmem_free(bip->bli_logged);
- bip->bli_logged = NULL;
-#endif /* XFS_TRANS_DEBUG */
-
-#ifdef XFS_BLI_TRACE
- ktrace_free(bip->bli_trace);
-#endif
- kmem_zone_free(xfs_buf_item_zone, bip);
+ xfs_buf_rele(bp);
+ xfs_buf_item_free(bip);
}
ASSERT(bip->bli_buf == bp);
+ xfs_buf_rele(bp);
mp = bip->bli_item.li_mountp;
/*
* xfs_trans_delete_ail() drops the AIL lock.
*/
xfs_trans_delete_ail(mp, (xfs_log_item_t *)bip);
-
-#ifdef XFS_TRANS_DEBUG
- kmem_free(bip->bli_orig);
- bip->bli_orig = NULL;
- kmem_free(bip->bli_logged);
- bip->bli_logged = NULL;
-#endif /* XFS_TRANS_DEBUG */
-
-#ifdef XFS_BLI_TRACE
- ktrace_free(bip->bli_trace);
-#endif
- kmem_zone_free(xfs_buf_item_zone, bip);
+ xfs_buf_item_free(bip);
}
#if defined(XFS_BLI_TRACE)
sbp = &sxp->sx_stat;
- xfs_lock_two_inodes(ip, tip, lock_flags);
+ /*
+ * we have to do two separate lock calls here to keep lockdep
+ * happy. If we try to get all the locks in one call, lock will
+ * report false positives when we drop the ILOCK and regain them
+ * below.
+ */
+ xfs_lock_two_inodes(ip, tip, XFS_IOLOCK_EXCL);
+ xfs_lock_two_inodes(ip, tip, XFS_ILOCK_EXCL);
locked = 1;
/* Verify that both files have the same format */
ASSERT(nextents <= XFS_LINEAR_EXTS);
size = nextents * sizeof(xfs_bmbt_rec_t);
- xfs_iext_irec_compact_full(ifp);
+ xfs_iext_irec_compact_pages(ifp);
ASSERT(ifp->if_real_bytes == XFS_IEXT_BUFSZ);
ep = ifp->if_u1.if_ext_irec->er_extbuf;
* compaction policy is as follows:
*
* Full Compaction: Extents fit into a single page (or inline buffer)
- * Full Compaction: Extents occupy less than 10% of allocated space
- * Partial Compaction: Extents occupy > 10% and < 50% of allocated space
+ * Partial Compaction: Extents occupy less than 50% of allocated space
* No Compaction: Extents occupy at least 50% of allocated space
*/
void
xfs_iext_direct_to_inline(ifp, nextents);
} else if (nextents <= XFS_LINEAR_EXTS) {
xfs_iext_indirect_to_direct(ifp);
- } else if (nextents < (nlists * XFS_LINEAR_EXTS) >> 3) {
- xfs_iext_irec_compact_full(ifp);
} else if (nextents < (nlists * XFS_LINEAR_EXTS) >> 1) {
xfs_iext_irec_compact_pages(ifp);
}
erp_next = erp + 1;
if (erp_next->er_extcount <=
(XFS_LINEAR_EXTS - erp->er_extcount)) {
- memmove(&erp->er_extbuf[erp->er_extcount],
+ memcpy(&erp->er_extbuf[erp->er_extcount],
erp_next->er_extbuf, erp_next->er_extcount *
sizeof(xfs_bmbt_rec_t));
erp->er_extcount += erp_next->er_extcount;
}
}
-/*
- * Fully compact the extent records managed by the indirection array.
- */
-void
-xfs_iext_irec_compact_full(
- xfs_ifork_t *ifp) /* inode fork pointer */
-{
- xfs_bmbt_rec_host_t *ep, *ep_next; /* extent record pointers */
- xfs_ext_irec_t *erp, *erp_next; /* extent irec pointers */
- int erp_idx = 0; /* extent irec index */
- int ext_avail; /* empty entries in ex list */
- int ext_diff; /* number of exts to add */
- int nlists; /* number of irec's (ex lists) */
-
- ASSERT(ifp->if_flags & XFS_IFEXTIREC);
-
- nlists = ifp->if_real_bytes / XFS_IEXT_BUFSZ;
- erp = ifp->if_u1.if_ext_irec;
- ep = &erp->er_extbuf[erp->er_extcount];
- erp_next = erp + 1;
- ep_next = erp_next->er_extbuf;
-
- while (erp_idx < nlists - 1) {
- /*
- * Check how many extent records are available in this irec.
- * If there is none skip the whole exercise.
- */
- ext_avail = XFS_LINEAR_EXTS - erp->er_extcount;
- if (ext_avail) {
-
- /*
- * Copy over as many as possible extent records into
- * the previous page.
- */
- ext_diff = MIN(ext_avail, erp_next->er_extcount);
- memcpy(ep, ep_next, ext_diff * sizeof(xfs_bmbt_rec_t));
- erp->er_extcount += ext_diff;
- erp_next->er_extcount -= ext_diff;
-
- /*
- * If the next irec is empty now we can simply
- * remove it.
- */
- if (erp_next->er_extcount == 0) {
- /*
- * Free page before removing extent record
- * so er_extoffs don't get modified in
- * xfs_iext_irec_remove.
- */
- kmem_free(erp_next->er_extbuf);
- erp_next->er_extbuf = NULL;
- xfs_iext_irec_remove(ifp, erp_idx + 1);
- erp = &ifp->if_u1.if_ext_irec[erp_idx];
- nlists = ifp->if_real_bytes / XFS_IEXT_BUFSZ;
-
- /*
- * If the next irec is not empty move up the content
- * that has not been copied to the previous page to
- * the beggining of this one.
- */
- } else {
- memmove(erp_next->er_extbuf, &ep_next[ext_diff],
- erp_next->er_extcount *
- sizeof(xfs_bmbt_rec_t));
- ep_next = erp_next->er_extbuf;
- memset(&ep_next[erp_next->er_extcount], 0,
- (XFS_LINEAR_EXTS -
- erp_next->er_extcount) *
- sizeof(xfs_bmbt_rec_t));
- }
- }
-
- if (erp->er_extcount == XFS_LINEAR_EXTS) {
- erp_idx++;
- if (erp_idx < nlists)
- erp = &ifp->if_u1.if_ext_irec[erp_idx];
- else
- break;
- }
- ep = &erp->er_extbuf[erp->er_extcount];
- erp_next = erp + 1;
- ep_next = erp_next->er_extbuf;
- }
-}
-
/*
* This is called to update the er_extoff field in the indirection
* array when extents have been added or removed from one of the
STATIC int xlog_iclogs_empty(xlog_t *log);
#if defined(XFS_LOG_TRACE)
+
+#define XLOG_TRACE_LOGGRANT_SIZE 2048
+#define XLOG_TRACE_ICLOG_SIZE 256
+
+void
+xlog_trace_loggrant_alloc(xlog_t *log)
+{
+ log->l_grant_trace = ktrace_alloc(XLOG_TRACE_LOGGRANT_SIZE, KM_NOFS);
+}
+
+void
+xlog_trace_loggrant_dealloc(xlog_t *log)
+{
+ ktrace_free(log->l_grant_trace);
+}
+
void
xlog_trace_loggrant(xlog_t *log, xlog_ticket_t *tic, xfs_caddr_t string)
{
unsigned long cnts;
- if (!log->l_grant_trace) {
- log->l_grant_trace = ktrace_alloc(2048, KM_NOSLEEP);
- if (!log->l_grant_trace)
- return;
- }
/* ticket counts are 1 byte each */
cnts = ((unsigned long)tic->t_ocnt) | ((unsigned long)tic->t_cnt) << 8;
(void *)((unsigned long)tic->t_unit_res));
}
+void
+xlog_trace_iclog_alloc(xlog_in_core_t *iclog)
+{
+ iclog->ic_trace = ktrace_alloc(XLOG_TRACE_ICLOG_SIZE, KM_NOFS);
+}
+
+void
+xlog_trace_iclog_dealloc(xlog_in_core_t *iclog)
+{
+ ktrace_free(iclog->ic_trace);
+}
+
void
xlog_trace_iclog(xlog_in_core_t *iclog, uint state)
{
- if (!iclog->ic_trace)
- iclog->ic_trace = ktrace_alloc(256, KM_NOFS);
ktrace_enter(iclog->ic_trace,
(void *)((unsigned long)state),
(void *)((unsigned long)current_pid()),
(void *)NULL, (void *)NULL);
}
#else
+
+#define xlog_trace_loggrant_alloc(log)
+#define xlog_trace_loggrant_dealloc(log)
#define xlog_trace_loggrant(log,tic,string)
+
+#define xlog_trace_iclog_alloc(iclog)
+#define xlog_trace_iclog_dealloc(iclog)
#define xlog_trace_iclog(iclog,state)
+
#endif /* XFS_LOG_TRACE */
* layer, it means the underlyin device no longer supports
* barrier I/O. Warn loudly and turn off barriers.
*/
- if ((l->l_mp->m_flags & XFS_MOUNT_BARRIER) && !XFS_BUF_ORDERED(bp)) {
+ if ((l->l_mp->m_flags & XFS_MOUNT_BARRIER) && !XFS_BUF_ISORDERED(bp)) {
l->l_mp->m_flags &= ~XFS_MOUNT_BARRIER;
xfs_fs_cmn_err(CE_WARN, l->l_mp,
"xlog_iodone: Barriers are no longer supported"
spin_lock_init(&log->l_grant_lock);
sv_init(&log->l_flush_wait, 0, "flush_wait");
+ xlog_trace_loggrant_alloc(log);
/* log record size must be multiple of BBSIZE; see xlog_rec_header_t */
ASSERT((XFS_BUF_SIZE(bp) & BBMASK) == 0);
sv_init(&iclog->ic_force_wait, SV_DEFAULT, "iclog-force");
sv_init(&iclog->ic_write_wait, SV_DEFAULT, "iclog-write");
+ xlog_trace_iclog_alloc(iclog);
+
iclogp = &iclog->ic_next;
}
*iclogp = log->l_iclog; /* complete ring */
sv_destroy(&iclog->ic_force_wait);
sv_destroy(&iclog->ic_write_wait);
xfs_buf_free(iclog->ic_bp);
-#ifdef XFS_LOG_TRACE
- if (iclog->ic_trace != NULL) {
- ktrace_free(iclog->ic_trace);
- }
-#endif
+ xlog_trace_iclog_dealloc(iclog);
next_iclog = iclog->ic_next;
kmem_free(iclog);
iclog = next_iclog;
spinlock_destroy(&log->l_grant_lock);
xfs_buf_free(log->l_xbuf);
-#ifdef XFS_LOG_TRACE
- if (log->l_trace != NULL) {
- ktrace_free(log->l_trace);
- }
- if (log->l_grant_trace != NULL) {
- ktrace_free(log->l_grant_trace);
- }
-#endif
+ xlog_trace_loggrant_dealloc(log);
log->l_mp->m_log = NULL;
kmem_free(log);
} /* xlog_dealloc_log */
int l_grant_write_bytes;
#ifdef XFS_LOG_TRACE
- struct ktrace *l_trace;
struct ktrace *l_grant_trace;
#endif
#endif
}
+/*
+ * xfs_lock_two_inodes() can only be used to lock one type of lock
+ * at a time - the iolock or the ilock, but not both at once. If
+ * we lock both at once, lockdep will report false positives saying
+ * we have violated locking orders.
+ */
void
xfs_lock_two_inodes(
xfs_inode_t *ip0,
int attempts = 0;
xfs_log_item_t *lp;
+ if (lock_mode & (XFS_IOLOCK_SHARED|XFS_IOLOCK_EXCL))
+ ASSERT((lock_mode & (XFS_ILOCK_SHARED|XFS_ILOCK_EXCL)) == 0);
ASSERT(ip0->i_ino != ip1->i_ino);
if (ip0->i_ino > ip1->i_ino) {
/*
* Zero file bytes between startoff and endoff inclusive.
* The iolock is held exclusive and no blocks are buffered.
+ *
+ * This function is used by xfs_free_file_space() to zero
+ * partial blocks when the range to free is not block aligned.
+ * When unreserving space with boundaries that are not block
+ * aligned we round up the start and round down the end
+ * boundaries and then use this function to zero the parts of
+ * the blocks that got dropped during the rounding.
*/
STATIC int
xfs_zero_remaining_bytes(
int nimap;
int error = 0;
+ /*
+ * Avoid doing I/O beyond eof - it's not necessary
+ * since nothing can read beyond eof. The space will
+ * be zeroed when the file is extended anyway.
+ */
+ if (startoff >= ip->i_size)
+ return 0;
+
+ if (endoff > ip->i_size)
+ endoff = ip->i_size;
+
bp = xfs_buf_get_noaddr(mp->m_sb.sb_blocksize,
XFS_IS_REALTIME_INODE(ip) ?
mp->m_rtdev_targp : mp->m_ddev_targp);
unlikely(__ret_warn_once); \
})
+#define WARN_ONCE(condition, format...) ({ \
+ static int __warned; \
+ int __ret_warn_once = !!(condition); \
+ \
+ if (unlikely(__ret_warn_once)) \
+ if (WARN(!__warned, format)) \
+ __warned = 1; \
+ unlikely(__ret_warn_once); \
+})
+
#define WARN_ON_RATELIMIT(condition, state) \
WARN_ON((condition) && __ratelimit(state))
#define PMD_ORDER 1
#define PTE_ORDER 0
-#define PTRS_PER_PGD ((PAGE_SIZE << PGD_ORDER) / sizeof(pgd_t))
+#define PTRS_PER_PGD (USER_PTRS_PER_PGD * 2)
#define PTRS_PER_PTE ((PAGE_SIZE << PTE_ORDER) / sizeof(pte_t))
#define USER_PTRS_PER_PGD (0x80000000UL/PGDIR_SIZE)
boot_cpu_data.x86_model <= 0x05 &&
boot_cpu_data.x86_mask < 0x0A)
return 1;
+ else if (boot_cpu_has(X86_FEATURE_AMDC1E))
+ return 1;
else
return max_cstate;
}
#define X86_FEATURE_LFENCE_RDTSC (3*32+18) /* Lfence synchronizes RDTSC */
#define X86_FEATURE_11AP (3*32+19) /* Bad local APIC aka 11AP */
#define X86_FEATURE_NOPL (3*32+20) /* The NOPL (0F 1F) instructions */
+#define X86_FEATURE_AMDC1E (3*32+21) /* AMD C1E detected */
/* Intel-defined CPU features, CPUID level 0x00000001 (ecx), word 4 */
#define X86_FEATURE_XMM3 (4*32+ 0) /* Streaming SIMD Extensions-3 */
void enter_idle(void);
void exit_idle(void);
+void c1e_remove_cpu(int cpu);
+
#endif
static inline int lba_28_ok(u64 block, u32 n_block)
{
/* check the ending block number */
- return ((block + n_block - 1) < ((u64)1 << 28)) && (n_block <= 256);
+ return ((block + n_block) < ((u64)1 << 28)) && (n_block <= 256);
}
static inline int lba_48_ok(u64 block, u32 n_block)
/*
- * include/asm/cnt32_to_63.h -- extend a 32-bit counter to 63 bits
+ * Extend a 32-bit counter to 63 bits
*
* Author: Nicolas Pitre
* Created: December 3, 2006
* as published by the Free Software Foundation.
*/
-#ifndef __INCLUDE_CNT32_TO_63_H__
-#define __INCLUDE_CNT32_TO_63_H__
+#ifndef __LINUX_CNT32_TO_63_H__
+#define __LINUX_CNT32_TO_63_H__
#include <linux/compiler.h>
-#include <asm/types.h>
+#include <linux/types.h>
#include <asm/byteorder.h>
-/*
- * Prototype: u64 cnt32_to_63(u32 cnt)
+/* this is used only to give gcc a clue about good code generation */
+union cnt32_to_63 {
+ struct {
+#if defined(__LITTLE_ENDIAN)
+ u32 lo, hi;
+#elif defined(__BIG_ENDIAN)
+ u32 hi, lo;
+#endif
+ };
+ u64 val;
+};
+
+
+/**
+ * cnt32_to_63 - Expand a 32-bit counter to a 63-bit counter
+ * @cnt_lo: The low part of the counter
+ *
* Many hardware clock counters are only 32 bits wide and therefore have
* a relatively short period making wrap-arounds rather frequent. This
* is a problem when implementing sched_clock() for example, where a 64-bit
* clear-bit instruction. Otherwise caller must remember to clear the top
* bit explicitly.
*/
-
-/* this is used only to give gcc a clue about good code generation */
-typedef union {
- struct {
-#if defined(__LITTLE_ENDIAN)
- u32 lo, hi;
-#elif defined(__BIG_ENDIAN)
- u32 hi, lo;
-#endif
- };
- u64 val;
-} cnt32_to_63_t;
-
#define cnt32_to_63(cnt_lo) \
({ \
- static volatile u32 __m_cnt_hi = 0; \
- cnt32_to_63_t __x; \
+ static volatile u32 __m_cnt_hi; \
+ union cnt32_to_63 __x; \
__x.hi = __m_cnt_hi; \
__x.lo = (cnt_lo); \
- if (unlikely((s32)(__x.hi ^ __x.lo) < 0)) \
+ if (unlikely((s32)(__x.hi ^ __x.lo) < 0)) \
__m_cnt_hi = __x.hi = (__x.hi ^ 0x80000000) + (__x.hi >> 31); \
__x.val; \
})
struct resource *parent, resource_size_t start,
resource_size_t n, const char *name);
-#define devm_release_region(start,n) \
+#define devm_release_region(dev, start, n) \
__devm_release_region(dev, &ioport_resource, (start), (n))
-#define devm_release_mem_region(start,n) \
+#define devm_release_mem_region(dev, start, n) \
__devm_release_region(dev, &iomem_resource, (start), (n))
extern void __devm_release_region(struct device *dev, struct resource *parent,
struct ms_status_register {
unsigned char reserved;
unsigned char interrupt;
-#define MEMSTICK_INT_CMDNAK 0x0001
-#define MEMSTICK_INT_IOREQ 0x0008
-#define MEMSTICK_INT_IOBREQ 0x0010
-#define MEMSTICK_INT_BREQ 0x0020
-#define MEMSTICK_INT_ERR 0x0040
-#define MEMSTICK_INT_CED 0x0080
+#define MEMSTICK_INT_CMDNAK 0x01
+#define MEMSTICK_INT_IOREQ 0x08
+#define MEMSTICK_INT_IOBREQ 0x10
+#define MEMSTICK_INT_BREQ 0x20
+#define MEMSTICK_INT_ERR 0x40
+#define MEMSTICK_INT_CED 0x80
unsigned char status0;
-#define MEMSTICK_STATUS0_WP 0x0001
-#define MEMSTICK_STATUS0_SL 0x0002
-#define MEMSTICK_STATUS0_BF 0x0010
-#define MEMSTICK_STATUS0_BE 0x0020
-#define MEMSTICK_STATUS0_FB0 0x0040
-#define MEMSTICK_STATUS0_MB 0x0080
+#define MEMSTICK_STATUS0_WP 0x01
+#define MEMSTICK_STATUS0_SL 0x02
+#define MEMSTICK_STATUS0_BF 0x10
+#define MEMSTICK_STATUS0_BE 0x20
+#define MEMSTICK_STATUS0_FB0 0x40
+#define MEMSTICK_STATUS0_MB 0x80
unsigned char status1;
-#define MEMSTICK_STATUS1_UCFG 0x0001
-#define MEMSTICK_STATUS1_FGER 0x0002
-#define MEMSTICK_STATUS1_UCEX 0x0004
-#define MEMSTICK_STATUS1_EXER 0x0008
-#define MEMSTICK_STATUS1_UCDT 0x0010
-#define MEMSTICK_STATUS1_DTER 0x0020
-#define MEMSTICK_STATUS1_FBI 0x0040
-#define MEMSTICK_STATUS1_MB 0x0080
+#define MEMSTICK_STATUS1_UCFG 0x01
+#define MEMSTICK_STATUS1_FGER 0x02
+#define MEMSTICK_STATUS1_UCEX 0x04
+#define MEMSTICK_STATUS1_EXER 0x08
+#define MEMSTICK_STATUS1_UCDT 0x10
+#define MEMSTICK_STATUS1_DTER 0x20
+#define MEMSTICK_STATUS1_FB1 0x40
+#define MEMSTICK_STATUS1_MB 0x80
} __attribute__((packed));
struct ms_id_register {
struct ms_param_register {
unsigned char system;
-#define MEMSTICK_SYS_ATEN 0xc0
-#define MEMSTICK_SYS_BAMD 0x80
#define MEMSTICK_SYS_PAM 0x08
+#define MEMSTICK_SYS_BAMD 0x80
unsigned char block_address_msb;
unsigned short block_address;
unsigned char cp;
-#define MEMSTICK_CP_BLOCK 0x0000
-#define MEMSTICK_CP_PAGE 0x0020
-#define MEMSTICK_CP_EXTRA 0x0040
-#define MEMSTICK_CP_OVERWRITE 0x0080
+#define MEMSTICK_CP_BLOCK 0x00
+#define MEMSTICK_CP_PAGE 0x20
+#define MEMSTICK_CP_EXTRA 0x40
+#define MEMSTICK_CP_OVERWRITE 0x80
unsigned char page_address;
} __attribute__((packed));
struct ms_extra_data_register {
unsigned char overwrite_flag;
-#define MEMSTICK_OVERWRITE_UPDATA 0x0010
-#define MEMSTICK_OVERWRITE_PAGE 0x0060
-#define MEMSTICK_OVERWRITE_BLOCK 0x0080
+#define MEMSTICK_OVERWRITE_UDST 0x10
+#define MEMSTICK_OVERWRITE_PGST1 0x20
+#define MEMSTICK_OVERWRITE_PGST0 0x40
+#define MEMSTICK_OVERWRITE_BKST 0x80
unsigned char management_flag;
-#define MEMSTICK_MANAGEMENT_SYSTEM 0x0004
-#define MEMSTICK_MANAGEMENT_TRANS_TABLE 0x0008
-#define MEMSTICK_MANAGEMENT_COPY 0x0010
-#define MEMSTICK_MANAGEMENT_ACCESS 0x0020
+#define MEMSTICK_MANAGEMENT_SYSFLG 0x04
+#define MEMSTICK_MANAGEMENT_ATFLG 0x08
+#define MEMSTICK_MANAGEMENT_SCMS1 0x10
+#define MEMSTICK_MANAGEMENT_SCMS0 0x20
unsigned short logical_address;
} __attribute__((packed));
struct mspro_param_register {
unsigned char system;
-#define MEMSTICK_SYS_SERIAL 0x80
#define MEMSTICK_SYS_PAR4 0x00
#define MEMSTICK_SYS_PAR8 0x40
+#define MEMSTICK_SYS_SERIAL 0x80
unsigned short data_count;
unsigned int data_address;
unsigned char w_length;
} __attribute__((packed));
-enum {
+enum memstick_tpc {
MS_TPC_READ_MG_STATUS = 0x01,
MS_TPC_READ_LONG_DATA = 0x02,
MS_TPC_READ_SHORT_DATA = 0x03,
MS_TPC_SET_CMD = 0x0e
};
-enum {
+enum memstick_command {
MS_CMD_BLOCK_END = 0x33,
MS_CMD_RESET = 0x3c,
MS_CMD_BLOCK_WRITE = 0x55,
/*** Driver structures and functions ***/
-#define MEMSTICK_PART_SHIFT 3
-
enum memstick_param { MEMSTICK_POWER = 1, MEMSTICK_INTERFACE };
#define MEMSTICK_POWER_OFF 0
struct memstick_host;
struct memstick_driver;
+struct memstick_device_id {
+ unsigned char match_flags;
#define MEMSTICK_MATCH_ALL 0x01
+ unsigned char type;
#define MEMSTICK_TYPE_LEGACY 0xff
#define MEMSTICK_TYPE_DUO 0x00
#define MEMSTICK_TYPE_PRO 0x01
+ unsigned char category;
#define MEMSTICK_CATEGORY_STORAGE 0xff
#define MEMSTICK_CATEGORY_STORAGE_DUO 0x00
+#define MEMSTICK_CATEGORY_IO 0x01
+#define MEMSTICK_CATEGORY_IO_PRO 0x10
-#define MEMSTICK_CLASS_GENERIC 0xff
-#define MEMSTICK_CLASS_GENERIC_DUO 0x00
-
-
-struct memstick_device_id {
- unsigned char match_flags;
- unsigned char type;
- unsigned char category;
unsigned char class;
+#define MEMSTICK_CLASS_FLASH 0xff
+#define MEMSTICK_CLASS_DUO 0x00
+#define MEMSTICK_CLASS_ROM 0x01
+#define MEMSTICK_CLASS_RO 0x02
+#define MEMSTICK_CLASS_WP 0x03
};
struct memstick_request {
void memstick_resume_host(struct memstick_host *host);
void memstick_init_req_sg(struct memstick_request *mrq, unsigned char tpc,
- struct scatterlist *sg);
+ const struct scatterlist *sg);
void memstick_init_req(struct memstick_request *mrq, unsigned char tpc,
- void *buf, size_t length);
+ const void *buf, size_t length);
int memstick_next_req(struct memstick_host *host,
struct memstick_request **mrq);
void memstick_new_req(struct memstick_host *host);
MLX4_STAT_RATE_OFFSET = 5
};
+enum {
+ MLX4_MTT_FLAG_PRESENT = 1
+};
+
static inline u64 mlx4_fw_ver(u64 major, u64 minor, u64 subminor)
{
return (major << 32) | (minor << 16) | subminor;
*
* This function returns the next zone at or below a given zone index that is
* within the allowed nodemask using a cursor as the starting point for the
- * search. The zoneref returned is a cursor that is used as the next starting
- * point for future calls to next_zones_zonelist().
+ * search. The zoneref returned is a cursor that represents the current zone
+ * being examined. It should be advanced by one before calling
+ * next_zones_zonelist again.
*/
struct zoneref *next_zones_zonelist(struct zoneref *z,
enum zone_type highest_zoneidx,
*
* This function returns the first zone at or below a given zone index that is
* within the allowed nodemask. The zoneref returned is a cursor that can be
- * used to iterate the zonelist with next_zones_zonelist. The cursor should
- * not be used by the caller as it does not match the value of the zone
- * returned.
+ * used to iterate the zonelist with next_zones_zonelist by advancing it by
+ * one before calling.
*/
static inline struct zoneref *first_zones_zonelist(struct zonelist *zonelist,
enum zone_type highest_zoneidx,
#define for_each_zone_zonelist_nodemask(zone, z, zlist, highidx, nodemask) \
for (z = first_zones_zonelist(zlist, highidx, nodemask, &zone); \
zone; \
- z = next_zones_zonelist(z, highidx, nodemask, &zone)) \
+ z = next_zones_zonelist(++z, highidx, nodemask, &zone)) \
/**
* for_each_zone_zonelist - helper macro to iterate over valid zones in a zonelist at or below a given zone index
#ifdef CONFIG_PCI_LEGACY
struct pci_dev __deprecated *pci_find_device(unsigned int vendor,
unsigned int device,
- const struct pci_dev *from);
+ struct pci_dev *from);
struct pci_dev __deprecated *pci_find_slot(unsigned int bus,
unsigned int devfn);
#endif /* CONFIG_PCI_LEGACY */
struct pci_dev *from);
struct pci_dev *pci_get_subsys(unsigned int vendor, unsigned int device,
unsigned int ss_vendor, unsigned int ss_device,
- const struct pci_dev *from);
+ struct pci_dev *from);
struct pci_dev *pci_get_slot(struct pci_bus *bus, unsigned int devfn);
struct pci_dev *pci_get_bus_and_slot(unsigned int bus, unsigned int devfn);
struct pci_dev *pci_get_class(unsigned int class, struct pci_dev *from);
static inline struct pci_dev *pci_find_device(unsigned int vendor,
unsigned int device,
- const struct pci_dev *from)
+ struct pci_dev *from)
{
return NULL;
}
unsigned int device,
unsigned int ss_vendor,
unsigned int ss_device,
- const struct pci_dev *from)
+ struct pci_dev *from)
{
return NULL;
}
/*
* Resource Management
*/
+#ifdef CONFIG_PNP
struct resource *pnp_get_resource(struct pnp_dev *, unsigned int, unsigned int);
+#else
+static inline struct resource *pnp_get_resource(struct pnp_dev *dev, unsigned int type, unsigned int num)
+{
+ return NULL;
+}
+#endif
static inline int pnp_resource_valid(struct resource *res)
{
#include <linux/types.h>
#include <linux/magic.h>
+#ifdef __KERNEL__
#include <linux/time.h>
+#endif
enum smb_protocol {
SMB_PROTOCOL_NONE,
int p9_error_init(void);
int p9_errstr2errno(char *, int);
int p9_trans_fd_init(void);
+void p9_trans_fd_exit(void);
#endif /* NET_9P_H */
#ifndef NET_9P_TRANSPORT_H
#define NET_9P_TRANSPORT_H
+#include <linux/module.h>
+
/**
* enum p9_trans_status - different states of underlying transports
* @Connected: transport is connected and healthy
int maxsize; /* max message size of transport */
int def; /* this transport should be default */
struct p9_trans * (*create)(const char *, char *, int, unsigned char);
+ struct module *owner;
};
void v9fs_register_trans(struct p9_trans_module *m);
-struct p9_trans_module *v9fs_match_trans(const substring_t *name);
-struct p9_trans_module *v9fs_default_trans(void);
+void v9fs_unregister_trans(struct p9_trans_module *m);
+struct p9_trans_module *v9fs_get_trans_by_name(const substring_t *name);
+struct p9_trans_module *v9fs_get_default_trans(void);
+void v9fs_put_trans(struct p9_trans_module *m);
#endif /* NET_9P_TRANSPORT_H */
*/
static inline int nla_ok(const struct nlattr *nla, int remaining)
{
- return remaining >= sizeof(*nla) &&
+ return remaining >= (int) sizeof(*nla) &&
nla->nla_len >= sizeof(*nla) &&
nla->nla_len <= remaining;
}
/**
* update_tasks_cpumask - Update the cpumasks of tasks in the cpuset.
* @cs: the cpuset in which each task's cpus_allowed mask needs to be changed
+ * @heap: if NULL, defer allocating heap memory to cgroup_scan_tasks()
*
* Called with cgroup_mutex held
*
* The cgroup_scan_tasks() function will scan all the tasks in a cgroup,
* calling callback functions for each.
*
- * Return 0 if successful, -errno if not.
+ * No return value. It's guaranteed that cgroup_scan_tasks() always returns 0
+ * if @heap != NULL.
*/
-static int update_tasks_cpumask(struct cpuset *cs)
+static void update_tasks_cpumask(struct cpuset *cs, struct ptr_heap *heap)
{
struct cgroup_scanner scan;
- struct ptr_heap heap;
- int retval;
-
- /*
- * cgroup_scan_tasks() will initialize heap->gt for us.
- * heap_init() is still needed here for we should not change
- * cs->cpus_allowed when heap_init() fails.
- */
- retval = heap_init(&heap, PAGE_SIZE, GFP_KERNEL, NULL);
- if (retval)
- return retval;
scan.cg = cs->css.cgroup;
scan.test_task = cpuset_test_cpumask;
scan.process_task = cpuset_change_cpumask;
- scan.heap = &heap;
- retval = cgroup_scan_tasks(&scan);
-
- heap_free(&heap);
- return retval;
+ scan.heap = heap;
+ cgroup_scan_tasks(&scan);
}
/**
*/
static int update_cpumask(struct cpuset *cs, const char *buf)
{
+ struct ptr_heap heap;
struct cpuset trialcs;
int retval;
int is_load_balanced;
if (cpus_equal(cs->cpus_allowed, trialcs.cpus_allowed))
return 0;
+ retval = heap_init(&heap, PAGE_SIZE, GFP_KERNEL, NULL);
+ if (retval)
+ return retval;
+
is_load_balanced = is_sched_load_balance(&trialcs);
mutex_lock(&callback_mutex);
* Scan tasks in the cpuset, and update the cpumasks of any
* that need an update.
*/
- retval = update_tasks_cpumask(cs);
- if (retval < 0)
- return retval;
+ update_tasks_cpumask(cs, &heap);
+
+ heap_free(&heap);
if (is_load_balanced)
async_rebuild_sched_domains();
nodes_empty(cp->mems_allowed))
remove_tasks_in_empty_cpuset(cp);
else {
- update_tasks_cpumask(cp);
+ update_tasks_cpumask(cp, NULL);
update_tasks_nodemask(cp, &oldmems);
}
}
*old = addr | (*old & ~PAGE_MASK);
/* The old page I have found cannot be a
- * destination page, so return it.
+ * destination page, so return it if it's
+ * gfp_flags honor the ones passed in.
*/
+ if (!(gfp_mask & __GFP_HIGHMEM) &&
+ PageHighMem(old_page)) {
+ kimage_free_pages(old_page);
+ continue;
+ }
addr = old_addr;
page = old_page;
break;
return NOTIFY_DONE;
}
-static void init_hrtick(void)
+static __init void init_hrtick(void)
{
hotcpu_notifier(hotplug_hrtick, 0);
}
u64 rt_runtime, rt_period;
int ret = 0;
+ if (sysctl_sched_rt_period <= 0)
+ return -EINVAL;
+
rt_period = ktime_to_ns(tg->rt_bandwidth.rt_period);
rt_runtime = tg->rt_bandwidth.rt_runtime;
unsigned long flags;
int i;
+ if (sysctl_sched_rt_period <= 0)
+ return -EINVAL;
+
spin_lock_irqsave(&def_rt_bandwidth.rt_runtime_lock, flags);
for_each_possible_cpu(i) {
struct rt_rq *rt_rq = &cpu_rq(i)->rt;
spin_lock(&rt_rq->rt_runtime_lock);
rt_rq->rt_runtime = rt_b->rt_runtime;
rt_rq->rt_time = 0;
+ rt_rq->rt_throttled = 0;
spin_unlock(&rt_rq->rt_runtime_lock);
spin_unlock(&rt_b->rt_runtime_lock);
}
}
}
+/**
+ * clockevents_shutdown - shutdown the device and clear next_event
+ * @dev: device to shutdown
+ */
+void clockevents_shutdown(struct clock_event_device *dev)
+{
+ clockevents_set_mode(dev, CLOCK_EVT_MODE_SHUTDOWN);
+ dev->next_event.tv64 = KTIME_MAX;
+}
+
/**
* clockevents_program_event - Reprogram the clock event device.
* @expires: absolute expiry time (monotonic clock)
if (new) {
BUG_ON(new->mode != CLOCK_EVT_MODE_UNUSED);
- clockevents_set_mode(new, CLOCK_EVT_MODE_SHUTDOWN);
+ clockevents_shutdown(new);
}
local_irq_restore(flags);
}
case CLOCK_EVT_NOTIFY_BROADCAST_FORCE:
if (!cpu_isset(cpu, tick_broadcast_mask)) {
cpu_set(cpu, tick_broadcast_mask);
- if (td->mode == TICKDEV_MODE_PERIODIC)
- clockevents_set_mode(dev,
- CLOCK_EVT_MODE_SHUTDOWN);
+ if (bc->mode == TICKDEV_MODE_PERIODIC)
+ clockevents_shutdown(dev);
}
if (*reason == CLOCK_EVT_NOTIFY_BROADCAST_FORCE)
tick_broadcast_force = 1;
if (!tick_broadcast_force &&
cpu_isset(cpu, tick_broadcast_mask)) {
cpu_clear(cpu, tick_broadcast_mask);
- if (td->mode == TICKDEV_MODE_PERIODIC)
+ if (bc->mode == TICKDEV_MODE_PERIODIC)
tick_setup_periodic(dev, 0);
}
break;
if (cpus_empty(tick_broadcast_mask)) {
if (!bc_stopped)
- clockevents_set_mode(bc, CLOCK_EVT_MODE_SHUTDOWN);
+ clockevents_shutdown(bc);
} else if (bc_stopped) {
if (tick_broadcast_device.mode == TICKDEV_MODE_PERIODIC)
tick_broadcast_start_periodic(bc);
if (tick_broadcast_device.mode == TICKDEV_MODE_PERIODIC) {
if (bc && cpus_empty(tick_broadcast_mask))
- clockevents_set_mode(bc, CLOCK_EVT_MODE_SHUTDOWN);
+ clockevents_shutdown(bc);
}
spin_unlock_irqrestore(&tick_broadcast_lock, flags);
bc = tick_broadcast_device.evtdev;
if (bc)
- clockevents_set_mode(bc, CLOCK_EVT_MODE_SHUTDOWN);
+ clockevents_shutdown(bc);
spin_unlock_irqrestore(&tick_broadcast_lock, flags);
}
spin_unlock_irqrestore(&tick_broadcast_lock, flags);
}
+/*
+ * Check, whether the broadcast device is in one shot mode
+ */
+int tick_broadcast_oneshot_active(void)
+{
+ return tick_broadcast_device.mode == TICKDEV_MODE_ONESHOT;
+}
+
#endif
*/
ktime_t tick_next_period;
ktime_t tick_period;
-int tick_do_timer_cpu __read_mostly = -1;
+int tick_do_timer_cpu __read_mostly = TICK_DO_TIMER_BOOT;
DEFINE_SPINLOCK(tick_device_lock);
/*
if (!tick_device_is_functional(dev))
return;
- if (dev->features & CLOCK_EVT_FEAT_PERIODIC) {
+ if ((dev->features & CLOCK_EVT_FEAT_PERIODIC) &&
+ !tick_broadcast_oneshot_active()) {
clockevents_set_mode(dev, CLOCK_EVT_MODE_PERIODIC);
} else {
unsigned long seq;
* If no cpu took the do_timer update, assign it to
* this cpu:
*/
- if (tick_do_timer_cpu == -1) {
+ if (tick_do_timer_cpu == TICK_DO_TIMER_BOOT) {
tick_do_timer_cpu = cpu;
tick_next_period = ktime_get();
tick_period = ktime_set(0, NSEC_PER_SEC / HZ);
* not give it back to the clockevents layer !
*/
if (tick_is_broadcast_device(curdev)) {
- clockevents_set_mode(curdev, CLOCK_EVT_MODE_SHUTDOWN);
+ clockevents_shutdown(curdev);
curdev = NULL;
}
clockevents_exchange_device(curdev, newdev);
if (*cpup == tick_do_timer_cpu) {
int cpu = first_cpu(cpu_online_map);
- tick_do_timer_cpu = (cpu != NR_CPUS) ? cpu : -1;
+ tick_do_timer_cpu = (cpu != NR_CPUS) ? cpu :
+ TICK_DO_TIMER_NONE;
}
spin_unlock_irqrestore(&tick_device_lock, flags);
}
unsigned long flags;
spin_lock_irqsave(&tick_device_lock, flags);
- clockevents_set_mode(td->evtdev, CLOCK_EVT_MODE_SHUTDOWN);
+ clockevents_shutdown(td->evtdev);
spin_unlock_irqrestore(&tick_device_lock, flags);
}
/*
* tick internal variable and functions used by low/high res code
*/
+
+#define TICK_DO_TIMER_NONE -1
+#define TICK_DO_TIMER_BOOT -2
+
DECLARE_PER_CPU(struct tick_device, tick_cpu_device);
extern spinlock_t tick_device_lock;
extern ktime_t tick_next_period;
extern void tick_setup_periodic(struct clock_event_device *dev, int broadcast);
extern void tick_handle_periodic(struct clock_event_device *dev);
+extern void clockevents_shutdown(struct clock_event_device *dev);
+
/*
* NO_HZ / high resolution timer shared code
*/
extern void tick_broadcast_switch_to_oneshot(void);
extern void tick_shutdown_broadcast_oneshot(unsigned int *cpup);
extern int tick_resume_broadcast_oneshot(struct clock_event_device *bc);
+extern int tick_broadcast_oneshot_active(void);
# else /* BROADCAST */
static inline void tick_broadcast_setup_oneshot(struct clock_event_device *bc)
{
static inline void tick_broadcast_oneshot_control(unsigned long reason) { }
static inline void tick_broadcast_switch_to_oneshot(void) { }
static inline void tick_shutdown_broadcast_oneshot(unsigned int *cpup) { }
+static inline int tick_broadcast_oneshot_active(void) { return 0; }
# endif /* !BROADCAST */
#else /* !ONESHOT */
{
return 0;
}
+static inline int tick_broadcast_oneshot_active(void) { return 0; }
#endif /* !TICK_ONESHOT */
/*
incr * ticks);
}
do_timer(++ticks);
+
+ /* Keep the tick_next_period variable up to date */
+ tick_next_period = ktime_add(last_jiffies_update, tick_period);
}
write_sequnlock(&xtime_lock);
}
*/
if (unlikely(!cpu_online(cpu))) {
if (cpu == tick_do_timer_cpu)
- tick_do_timer_cpu = -1;
+ tick_do_timer_cpu = TICK_DO_TIMER_NONE;
}
if (unlikely(ts->nohz_mode == NOHZ_MODE_INACTIVE))
* invoked.
*/
if (cpu == tick_do_timer_cpu)
- tick_do_timer_cpu = -1;
+ tick_do_timer_cpu = TICK_DO_TIMER_NONE;
ts->idle_sleeps++;
* this duty, then the jiffies update is still serialized by
* xtime_lock.
*/
- if (unlikely(tick_do_timer_cpu == -1))
+ if (unlikely(tick_do_timer_cpu == TICK_DO_TIMER_NONE))
tick_do_timer_cpu = cpu;
/* Check, if the jiffies need an update */
* this duty, then the jiffies update is still serialized by
* xtime_lock.
*/
- if (unlikely(tick_do_timer_cpu == -1))
+ if (unlikely(tick_do_timer_cpu == TICK_DO_TIMER_NONE))
tick_do_timer_cpu = cpu;
#endif
do {
progress = try_to_free_mem_cgroup_pages(mem, gfp_mask);
+ progress += res_counter_check_under_limit(&mem->res);
} while (!progress && --retry);
css_put(&mem->css);
(z->zone && !zref_in_nodemask(z, nodes)))
z++;
- *zone = zonelist_zone(z++);
+ *zone = zonelist_zone(z);
return z;
}
INIT_LIST_HEAD(&n->partial);
#ifdef CONFIG_SLUB_DEBUG
atomic_long_set(&n->nr_slabs, 0);
+ atomic_long_set(&n->total_objects, 0);
INIT_LIST_HEAD(&n->full);
#endif
}
if (!dentry)
goto put_memory;
- error = -ENOSPC;
- inode = ramfs_get_inode(root->d_sb, S_IFREG | S_IRWXUGO, 0);
- if (!inode)
- goto put_dentry;
-
- d_instantiate(dentry, inode);
error = -ENFILE;
- file = alloc_file(shm_mnt, dentry, FMODE_WRITE | FMODE_READ,
- &ramfs_file_operations);
+ file = get_empty_filp();
if (!file)
goto put_dentry;
- inode->i_nlink = 0; /* It is unlinked */
-
- /* notify everyone as to the change of file size */
- error = do_truncate(dentry, size, 0, file);
- if (error < 0)
+ error = -ENOSPC;
+ inode = ramfs_get_inode(root->d_sb, S_IFREG | S_IRWXUGO, 0);
+ if (!inode)
goto close_file;
+ d_instantiate(dentry, inode);
+ inode->i_size = size;
+ inode->i_nlink = 0; /* It is unlinked */
+ init_file(file, shm_mnt, dentry, FMODE_WRITE | FMODE_READ,
+ &ramfs_file_operations);
return file;
close_file:
put_filp(file);
- return ERR_PTR(error);
-
put_dentry:
dput(dentry);
put_memory:
int option;
int ret = 0;
- clnt->trans_mod = v9fs_default_trans();
clnt->dotu = 1;
clnt->msize = 8192;
clnt->msize = option;
break;
case Opt_trans:
- clnt->trans_mod = v9fs_match_trans(&args[0]);
+ clnt->trans_mod = v9fs_get_trans_by_name(&args[0]);
break;
case Opt_legacy:
clnt->dotu = 0;
continue;
}
}
+
+ if (!clnt->trans_mod)
+ clnt->trans_mod = v9fs_get_default_trans();
+
kfree(options);
return ret;
}
if (!clnt)
return ERR_PTR(-ENOMEM);
+ clnt->trans_mod = NULL;
clnt->trans = NULL;
spin_lock_init(&clnt->lock);
INIT_LIST_HEAD(&clnt->fidlist);
clnt->trans = NULL;
}
+ v9fs_put_trans(clnt->trans_mod);
+
list_for_each_entry_safe(fid, fidptr, &clnt->fidlist, flist)
p9_fid_destroy(fid);
unsigned char **pdata)
{
*pdata = buf_alloc(bufp, count);
+ if (*pdata == NULL)
+ return -ENOMEM;
memmove(*pdata, data, count);
- return count;
+ return 0;
}
static int
unsigned char **pdata)
{
*pdata = buf_alloc(bufp, count);
+ if (*pdata == NULL)
+ return -ENOMEM;
return copy_from_user(*pdata, data, count);
}
#include <linux/parser.h>
#include <net/9p/transport.h>
#include <linux/list.h>
+#include <linux/spinlock.h>
#ifdef CONFIG_NET_9P_DEBUG
unsigned int p9_debug_level = 0; /* feature-rific global debug level */
*
*/
+static DEFINE_SPINLOCK(v9fs_trans_lock);
static LIST_HEAD(v9fs_trans_list);
-static struct p9_trans_module *v9fs_default_transport;
/**
* v9fs_register_trans - register a new transport with 9p
*/
void v9fs_register_trans(struct p9_trans_module *m)
{
+ spin_lock(&v9fs_trans_lock);
list_add_tail(&m->list, &v9fs_trans_list);
- if (m->def)
- v9fs_default_transport = m;
+ spin_unlock(&v9fs_trans_lock);
}
EXPORT_SYMBOL(v9fs_register_trans);
/**
- * v9fs_match_trans - match transport versus registered transports
+ * v9fs_unregister_trans - unregister a 9p transport
+ * @m: the transport to remove
+ *
+ */
+void v9fs_unregister_trans(struct p9_trans_module *m)
+{
+ spin_lock(&v9fs_trans_lock);
+ list_del_init(&m->list);
+ spin_unlock(&v9fs_trans_lock);
+}
+EXPORT_SYMBOL(v9fs_unregister_trans);
+
+/**
+ * v9fs_get_trans_by_name - get transport with the matching name
* @name: string identifying transport
*
*/
-struct p9_trans_module *v9fs_match_trans(const substring_t *name)
+struct p9_trans_module *v9fs_get_trans_by_name(const substring_t *name)
{
- struct list_head *p;
- struct p9_trans_module *t = NULL;
-
- list_for_each(p, &v9fs_trans_list) {
- t = list_entry(p, struct p9_trans_module, list);
- if (strncmp(t->name, name->from, name->to-name->from) == 0)
- return t;
- }
- return NULL;
+ struct p9_trans_module *t, *found = NULL;
+
+ spin_lock(&v9fs_trans_lock);
+
+ list_for_each_entry(t, &v9fs_trans_list, list)
+ if (strncmp(t->name, name->from, name->to-name->from) == 0 &&
+ try_module_get(t->owner)) {
+ found = t;
+ break;
+ }
+
+ spin_unlock(&v9fs_trans_lock);
+ return found;
}
-EXPORT_SYMBOL(v9fs_match_trans);
+EXPORT_SYMBOL(v9fs_get_trans_by_name);
/**
- * v9fs_default_trans - returns pointer to default transport
+ * v9fs_get_default_trans - get the default transport
*
*/
-struct p9_trans_module *v9fs_default_trans(void)
+struct p9_trans_module *v9fs_get_default_trans(void)
{
- if (v9fs_default_transport)
- return v9fs_default_transport;
- else if (!list_empty(&v9fs_trans_list))
- return list_first_entry(&v9fs_trans_list,
- struct p9_trans_module, list);
- else
- return NULL;
+ struct p9_trans_module *t, *found = NULL;
+
+ spin_lock(&v9fs_trans_lock);
+
+ list_for_each_entry(t, &v9fs_trans_list, list)
+ if (t->def && try_module_get(t->owner)) {
+ found = t;
+ break;
+ }
+
+ if (!found)
+ list_for_each_entry(t, &v9fs_trans_list, list)
+ if (try_module_get(t->owner)) {
+ found = t;
+ break;
+ }
+
+ spin_unlock(&v9fs_trans_lock);
+ return found;
}
-EXPORT_SYMBOL(v9fs_default_trans);
+EXPORT_SYMBOL(v9fs_get_default_trans);
+/**
+ * v9fs_put_trans - put trans
+ * @m: transport to put
+ *
+ */
+void v9fs_put_trans(struct p9_trans_module *m)
+{
+ if (m)
+ module_put(m->owner);
+}
/**
* v9fs_init - Initialize module
static void __exit exit_p9(void)
{
printk(KERN_INFO "Unloading 9P2000 support\n");
+
+ p9_trans_fd_exit();
}
module_init(init_p9)
* @trans: reference to transport instance for this connection
* @tagpool: id accounting for transactions
* @err: error state
- * @equeue: event wait_q (?)
* @req_list: accounting for requests which have been sent
* @unsent_req_list: accounting for requests that haven't been sent
* @rcall: current response &p9_fcall structure
struct p9_trans *trans;
struct p9_idpool *tagpool;
int err;
- wait_queue_head_t equeue;
struct list_head req_list;
struct list_head unsent_req_list;
struct p9_fcall *rcall;
static void p9_conn_cancel(struct p9_conn *m, int err);
-static int p9_mux_global_init(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(p9_mux_poll_tasks); i++)
- p9_mux_poll_tasks[i].task = NULL;
-
- p9_mux_wq = create_workqueue("v9fs");
- if (!p9_mux_wq) {
- printk(KERN_WARNING "v9fs: mux: creating workqueue failed\n");
- return -ENOMEM;
- }
-
- return 0;
-}
-
static u16 p9_mux_get_tag(struct p9_conn *m)
{
int tag;
static struct p9_conn *p9_conn_create(struct p9_trans *trans)
{
int i, n;
- struct p9_conn *m, *mtmp;
+ struct p9_conn *m;
P9_DPRINTK(P9_DEBUG_MUX, "transport %p msize %d\n", trans,
trans->msize);
- m = kmalloc(sizeof(struct p9_conn), GFP_KERNEL);
+ m = kzalloc(sizeof(struct p9_conn), GFP_KERNEL);
if (!m)
return ERR_PTR(-ENOMEM);
m->trans = trans;
m->tagpool = p9_idpool_create();
if (IS_ERR(m->tagpool)) {
- mtmp = ERR_PTR(-ENOMEM);
kfree(m);
- return mtmp;
+ return ERR_PTR(-ENOMEM);
}
- m->err = 0;
- init_waitqueue_head(&m->equeue);
INIT_LIST_HEAD(&m->req_list);
INIT_LIST_HEAD(&m->unsent_req_list);
- m->rcall = NULL;
- m->rpos = 0;
- m->rbuf = NULL;
- m->wpos = m->wsize = 0;
- m->wbuf = NULL;
INIT_WORK(&m->rq, p9_read_work);
INIT_WORK(&m->wq, p9_write_work);
- m->wsched = 0;
- memset(&m->poll_waddr, 0, sizeof(m->poll_waddr));
- m->poll_task = NULL;
n = p9_mux_poll_start(m);
if (n) {
kfree(m);
for (i = 0; i < ARRAY_SIZE(m->poll_waddr); i++) {
if (IS_ERR(m->poll_waddr[i])) {
p9_mux_poll_stop(m);
- mtmp = (void *)m->poll_waddr; /* the error code */
kfree(m);
- m = mtmp;
- break;
+ return (void *)m->poll_waddr; /* the error code */
}
}
{
P9_DPRINTK(P9_DEBUG_MUX, "mux %p prev %p next %p\n", m,
m->mux_list.prev, m->mux_list.next);
- p9_conn_cancel(m, -ECONNRESET);
-
- if (!list_empty(&m->req_list)) {
- /* wait until all processes waiting on this session exit */
- P9_DPRINTK(P9_DEBUG_MUX,
- "mux %p waiting for empty request queue\n", m);
- wait_event_timeout(m->equeue, (list_empty(&m->req_list)), 5000);
- P9_DPRINTK(P9_DEBUG_MUX, "mux %p request queue empty: %d\n", m,
- list_empty(&m->req_list));
- }
p9_mux_poll_stop(m);
+ cancel_work_sync(&m->rq);
+ cancel_work_sync(&m->wq);
+
+ p9_conn_cancel(m, -ECONNRESET);
+
m->trans = NULL;
p9_idpool_destroy(m->tagpool);
kfree(m);
(*req->cb) (req, req->cba);
else
kfree(req->rcall);
-
- wake_up(&m->equeue);
}
} else {
if (err >= 0 && rcall->id != P9_RFLUSH)
else
n = p9_mux_get_tag(m);
- if (n < 0)
+ if (n < 0) {
+ kfree(req);
return ERR_PTR(-ENOMEM);
+ }
p9_set_tag(tc, n);
(*req->cb) (req, req->cba);
else
kfree(req->rcall);
-
- wake_up(&m->equeue);
}
kfree(freq->tcall);
else
kfree(req->rcall);
}
-
- wake_up(&m->equeue);
}
/**
{
int ret, n;
struct p9_trans_fd *ts = NULL;
- mm_segment_t oldfs;
if (trans && trans->status == Connected)
ts = trans->priv;
if (!ts->wr->f_op || !ts->wr->f_op->poll)
return -EIO;
- oldfs = get_fs();
- set_fs(get_ds());
-
ret = ts->rd->f_op->poll(ts->rd, pt);
if (ret < 0)
- goto end;
+ return ret;
if (ts->rd != ts->wr) {
n = ts->wr->f_op->poll(ts->wr, pt);
- if (n < 0) {
- ret = n;
- goto end;
- }
+ if (n < 0)
+ return n;
ret = (ret & ~POLLOUT) | (n & ~POLLIN);
}
-end:
- set_fs(oldfs);
return ret;
}
.maxsize = MAX_SOCK_BUF,
.def = 1,
.create = p9_trans_create_tcp,
+ .owner = THIS_MODULE,
};
static struct p9_trans_module p9_unix_trans = {
.maxsize = MAX_SOCK_BUF,
.def = 0,
.create = p9_trans_create_unix,
+ .owner = THIS_MODULE,
};
static struct p9_trans_module p9_fd_trans = {
.maxsize = MAX_SOCK_BUF,
.def = 0,
.create = p9_trans_create_fd,
+ .owner = THIS_MODULE,
};
int p9_trans_fd_init(void)
{
- int ret = p9_mux_global_init();
- if (ret) {
- printk(KERN_WARNING "9p: starting mux failed\n");
- return ret;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(p9_mux_poll_tasks); i++)
+ p9_mux_poll_tasks[i].task = NULL;
+
+ p9_mux_wq = create_workqueue("v9fs");
+ if (!p9_mux_wq) {
+ printk(KERN_WARNING "v9fs: mux: creating workqueue failed\n");
+ return -ENOMEM;
}
v9fs_register_trans(&p9_tcp_trans);
return 0;
}
-EXPORT_SYMBOL(p9_trans_fd_init);
+
+void p9_trans_fd_exit(void)
+{
+ v9fs_unregister_trans(&p9_tcp_trans);
+ v9fs_unregister_trans(&p9_unix_trans);
+ v9fs_unregister_trans(&p9_fd_trans);
+
+ destroy_workqueue(p9_mux_wq);
+}
.create = p9_virtio_create,
.maxsize = PAGE_SIZE*16,
.def = 0,
+ .owner = THIS_MODULE,
};
/* The standard init function */
static void __exit p9_virtio_cleanup(void)
{
unregister_virtio_driver(&p9_virtio_drv);
+ v9fs_unregister_trans(&p9_virtio_trans);
}
module_init(p9_virtio_init);
{
int ret;
+ if (!test_bit(HCI_UP, &hdev->flags))
+ return -ENETDOWN;
+
/* Serialize all requests */
hci_req_lock(hdev);
ret = __hci_request(hdev, req, opt, timeout);
#include <linux/if_arp.h>
#include <linux/if_vlan.h>
#include <linux/ip.h>
+#include <net/ip.h>
#include <linux/ipv6.h>
#include <linux/in.h>
#include <linux/jhash.h>
{
u32 addr1, addr2, ports;
u32 hash, ihl;
- u8 ip_proto;
+ u8 ip_proto = 0;
if (unlikely(!simple_tx_hashrnd_initialized)) {
get_random_bytes(&simple_tx_hashrnd, 4);
switch (skb->protocol) {
case __constant_htons(ETH_P_IP):
- ip_proto = ip_hdr(skb)->protocol;
+ if (!(ip_hdr(skb)->frag_off & htons(IP_MF | IP_OFFSET)))
+ ip_proto = ip_hdr(skb)->protocol;
addr1 = ip_hdr(skb)->saddr;
addr2 = ip_hdr(skb)->daddr;
ihl = ip_hdr(skb)->ihl;
return 0;
}
+static int __udp_queue_rcv_skb(struct sock *sk, struct sk_buff *skb)
+{
+ int is_udplite = IS_UDPLITE(sk);
+ int rc;
+
+ if ((rc = sock_queue_rcv_skb(sk, skb)) < 0) {
+ /* Note that an ENOMEM error is charged twice */
+ if (rc == -ENOMEM)
+ UDP_INC_STATS_BH(sock_net(sk), UDP_MIB_RCVBUFERRORS,
+ is_udplite);
+ goto drop;
+ }
+
+ return 0;
+
+drop:
+ UDP_INC_STATS_BH(sock_net(sk), UDP_MIB_INERRORS, is_udplite);
+ kfree_skb(skb);
+ return -1;
+}
+
/* returns:
* -1: error
* 0: success
up->encap_rcv != NULL) {
int ret;
- bh_unlock_sock(sk);
ret = (*up->encap_rcv)(sk, skb);
- bh_lock_sock(sk);
if (ret <= 0) {
UDP_INC_STATS_BH(sock_net(sk),
UDP_MIB_INDATAGRAMS,
goto drop;
}
- if ((rc = sock_queue_rcv_skb(sk,skb)) < 0) {
- /* Note that an ENOMEM error is charged twice */
- if (rc == -ENOMEM) {
- UDP_INC_STATS_BH(sock_net(sk),
- UDP_MIB_RCVBUFERRORS, is_udplite);
- atomic_inc(&sk->sk_drops);
- }
- goto drop;
- }
+ rc = 0;
- return 0;
+ bh_lock_sock(sk);
+ if (!sock_owned_by_user(sk))
+ rc = __udp_queue_rcv_skb(sk, skb);
+ else
+ sk_add_backlog(sk, skb);
+ bh_unlock_sock(sk);
+
+ return rc;
drop:
UDP_INC_STATS_BH(sock_net(sk), UDP_MIB_INERRORS, is_udplite);
skb1 = skb_clone(skb, GFP_ATOMIC);
if (skb1) {
- int ret = 0;
-
- bh_lock_sock(sk);
- if (!sock_owned_by_user(sk))
- ret = udp_queue_rcv_skb(sk, skb1);
- else
- sk_add_backlog(sk, skb1);
- bh_unlock_sock(sk);
-
+ int ret = udp_queue_rcv_skb(sk, skb1);
if (ret > 0)
/* we should probably re-process instead
* of dropping packets here. */
uh->dest, inet_iif(skb), udptable);
if (sk != NULL) {
- int ret = 0;
- bh_lock_sock(sk);
- if (!sock_owned_by_user(sk))
- ret = udp_queue_rcv_skb(sk, skb);
- else
- sk_add_backlog(sk, skb);
- bh_unlock_sock(sk);
+ int ret = udp_queue_rcv_skb(sk, skb);
sock_put(sk);
/* a return value > 0 means to resubmit the input, but
.sendmsg = udp_sendmsg,
.recvmsg = udp_recvmsg,
.sendpage = udp_sendpage,
- .backlog_rcv = udp_queue_rcv_skb,
+ .backlog_rcv = __udp_queue_rcv_skb,
.hash = udp_lib_hash,
.unhash = udp_lib_unhash,
.get_port = udp_v4_get_port,
hdrlen -= 2;
if (!(optinfo->flags & IP6T_OPTS_OPTS)) {
return ret;
- } else if (optinfo->flags & IP6T_OPTS_NSTRICT) {
- pr_debug("Not strict - not implemented");
} else {
pr_debug("Strict ");
pr_debug("#%d ", optinfo->optsnr);
pr_debug("ip6t_opts: unknown flags %X\n", optsinfo->invflags);
return false;
}
+
+ if (optsinfo->flags & IP6T_OPTS_NSTRICT) {
+ pr_debug("ip6t_opts: Not strict - not implemented");
+ return false;
+ }
+
return true;
}
time_after(jiffies, (dev->trans_start +
dev->watchdog_timeo))) {
char drivername[64];
- printk(KERN_INFO "NETDEV WATCHDOG: %s (%s): transmit timed out\n",
+ WARN_ONCE(1, KERN_INFO "NETDEV WATCHDOG: %s (%s): transmit timed out\n",
dev->name, netdev_drivername(dev, drivername, 64));
dev->tx_timeout(dev);
- WARN_ON_ONCE(1);
}
if (!mod_timer(&dev->watchdog_timer,
round_jiffies(jiffies +
/* Check to see if this is a duplicate. */
peer = sctp_assoc_lookup_paddr(asoc, addr);
if (peer) {
+ /* An UNKNOWN state is only set on transports added by
+ * user in sctp_connectx() call. Such transports should be
+ * considered CONFIRMED per RFC 4960, Section 5.4.
+ */
if (peer->state == SCTP_UNKNOWN) {
- if (peer_state == SCTP_ACTIVE)
- peer->state = SCTP_ACTIVE;
- if (peer_state == SCTP_UNCONFIRMED)
- peer->state = SCTP_UNCONFIRMED;
+ peer->state = SCTP_ACTIVE;
}
return peer;
}
if (!(dst->dev->features & NETIF_F_NO_CSUM)) {
crc32 = sctp_start_cksum((__u8 *)sh, cksum_buf_len);
crc32 = sctp_end_cksum(crc32);
- }
+ } else
+ nskb->ip_summed = CHECKSUM_UNNECESSARY;
/* 3) Put the resultant value into the checksum field in the
* common header, and leave the rest of the bits unchanged.
/* if the peer reports AUTH, assume that he
* supports AUTH.
*/
- asoc->peer.auth_capable = 1;
+ if (sctp_auth_enable)
+ asoc->peer.auth_capable = 1;
break;
case SCTP_CID_ASCONF:
case SCTP_CID_ASCONF_ACK:
- asoc->peer.asconf_capable = 1;
+ if (sctp_addip_enable)
+ asoc->peer.asconf_capable = 1;
break;
default:
break;
/* Release the transport structures. */
list_for_each_safe(pos, temp, &asoc->peer.transport_addr_list) {
transport = list_entry(pos, struct sctp_transport, transports);
- list_del_init(pos);
- sctp_transport_free(transport);
+ if (transport->state != SCTP_ACTIVE)
+ sctp_assoc_rm_peer(asoc, transport);
}
- asoc->peer.transport_count = 0;
-
nomem:
return 0;
}
break;
case SCTP_PARAM_SET_PRIMARY:
+ if (!sctp_addip_enable)
+ goto fall_through;
+
addr_param = param.v + sizeof(sctp_addip_param_t);
af = sctp_get_af_specific(param_type2af(param.p->type));
goto out_put;
}
+#if 0
#ifdef HAVE_SET_RESTORE_SIGMASK
asmlinkage long sys_paccept(int fd, struct sockaddr __user *upeer_sockaddr,
int __user *upeer_addrlen,
return do_accept(fd, upeer_sockaddr, upeer_addrlen, flags);
}
#endif
+#endif
asmlinkage long sys_accept(int fd, struct sockaddr __user *upeer_sockaddr,
int __user *upeer_addrlen)
static int indent = 1;
static int valid_stdin = 1;
+static int sync_kconfig;
static int conf_cnt;
static char line[128];
static struct menu *rootEntry;
static void check_stdin(void)
{
- if (!valid_stdin && input_mode == ask_silent) {
+ if (!valid_stdin) {
printf(_("aborted!\n\n"));
printf(_("Console input/output is redirected. "));
printf(_("Run 'make oldconfig' to update configuration.\n\n"));
check_conf(child);
}
-static void conf_do_update(void)
-{
- /* Update until a loop caused no more changes */
- do {
- conf_cnt = 0;
- check_conf(&rootmenu);
- } while (conf_cnt);
-}
-
-static int conf_silent_update(void)
-{
- const char *name;
-
- if (conf_get_changed()) {
- name = getenv("KCONFIG_NOSILENTUPDATE");
- if (name && *name) {
- fprintf(stderr,
- _("\n*** Kernel configuration requires explicit update.\n\n"));
- return 1;
- }
- conf_do_update();
- }
- return 0;
-}
-
-static int conf_update(void)
-{
- rootEntry = &rootmenu;
- conf(&rootmenu);
- if (input_mode == ask_all) {
- input_mode = ask_silent;
- valid_stdin = 1;
- }
- conf_do_update();
- return 0;
-}
-
int main(int ac, char **av)
{
int opt;
while ((opt = getopt(ac, av, "osdD:nmyrh")) != -1) {
switch (opt) {
case 'o':
- input_mode = ask_new;
+ input_mode = ask_silent;
break;
case 's':
input_mode = ask_silent;
- valid_stdin = isatty(0) && isatty(1) && isatty(2);
+ sync_kconfig = 1;
break;
case 'd':
input_mode = set_default;
name = av[optind];
conf_parse(name);
//zconfdump(stdout);
+ if (sync_kconfig) {
+ if (stat(".config", &tmpstat)) {
+ fprintf(stderr, _("***\n"
+ "*** You have not yet configured your kernel!\n"
+ "*** (missing kernel .config file)\n"
+ "***\n"
+ "*** Please run some configurator (e.g. \"make oldconfig\" or\n"
+ "*** \"make menuconfig\" or \"make xconfig\").\n"
+ "***\n"));
+ exit(1);
+ }
+ }
+
switch (input_mode) {
case set_default:
if (!defconfig_file)
}
break;
case ask_silent:
- if (stat(".config", &tmpstat)) {
- printf(_("***\n"
- "*** You have not yet configured your kernel!\n"
- "*** (missing kernel .config file)\n"
- "***\n"
- "*** Please run some configurator (e.g. \"make oldconfig\" or\n"
- "*** \"make menuconfig\" or \"make xconfig\").\n"
- "***\n"));
- exit(1);
- }
case ask_all:
case ask_new:
conf_read(NULL);
default:
break;
}
+
+ if (sync_kconfig) {
+ if (conf_get_changed()) {
+ name = getenv("KCONFIG_NOSILENTUPDATE");
+ if (name && *name) {
+ fprintf(stderr,
+ _("\n*** Kernel configuration requires explicit update.\n\n"));
+ return 1;
+ }
+ }
+ valid_stdin = isatty(0) && isatty(1) && isatty(2);
+ }
+
switch (input_mode) {
case set_no:
conf_set_all_new_symbols(def_no);
case set_default:
conf_set_all_new_symbols(def_default);
break;
- case ask_silent:
case ask_new:
- if (conf_silent_update())
- exit(1);
- break;
case ask_all:
- if (conf_update())
- exit(1);
+ rootEntry = &rootmenu;
+ conf(&rootmenu);
+ input_mode = ask_silent;
+ /* fall through */
+ case ask_silent:
+ /* Update until a loop caused no more changes */
+ do {
+ conf_cnt = 0;
+ check_conf(&rootmenu);
+ } while (conf_cnt);
break;
}
- if (conf_write(NULL)) {
- fprintf(stderr, _("\n*** Error during writing of the kernel configuration.\n\n"));
- exit(1);
- }
- /* ask_silent is used during the build so we shall update autoconf.
- * All other commands are only used to generate a config.
- */
- if (input_mode == ask_silent && conf_write_autoconf()) {
- fprintf(stderr, _("\n*** Error during writing of the kernel configuration.\n\n"));
- return 1;
+ if (sync_kconfig) {
+ /* silentoldconfig is used during the build so we shall update autoconf.
+ * All other commands are only used to generate a config.
+ */
+ if (conf_get_changed() && conf_write(NULL)) {
+ fprintf(stderr, _("\n*** Error during writing of the kernel configuration.\n\n"));
+ exit(1);
+ }
+ if (conf_write_autoconf()) {
+ fprintf(stderr, _("\n*** Error during update of the kernel configuration.\n\n"));
+ return 1;
+ }
+ } else {
+ if (conf_write(NULL)) {
+ fprintf(stderr, _("\n*** Error during writing of the kernel configuration.\n\n"));
+ exit(1);
+ }
}
return 0;
}
continue;
if (def == S_DEF_USER) {
sym = sym_find(line + 9);
- if (!sym)
+ if (!sym) {
+ sym_add_change_count(1);
break;
+ }
} else {
sym = sym_lookup(line + 9, 0);
if (sym->type == S_UNKNOWN)
}
if (def == S_DEF_USER) {
sym = sym_find(line + 7);
- if (!sym)
+ if (!sym) {
+ sym_add_change_count(1);
break;
+ }
} else {
sym = sym_lookup(line + 7, 0);
if (sym->type == S_UNKNOWN)
print " <refsect1>\n";
print " <title>Members</title>\n";
+ if ($#{$args{'parameterlist'}} >= 0) {
print " <variablelist>\n";
foreach $parameter (@{$args{'parameterlist'}}) {
($parameter =~ /^#/) && next;
print " </varlistentry>\n";
}
print " </variablelist>\n";
+ } else {
+ print " <para>\n None\n </para>\n";
+ }
print " </refsect1>\n";
output_section_xml(@_);
return -ENODEV;
card = pcm->card;
- down_read(&card->controls_rwsem);
+ read_lock(&card->ctl_files_rwlock);
list_for_each_entry(kctl, &card->ctl_files, list) {
if (kctl->pid == current->pid) {
prefer_subdevice = kctl->prefer_pcm_subdevice;
break;
}
}
- up_read(&card->controls_rwsem);
+ read_unlock(&card->ctl_files_rwlock);
switch (stream) {
case SNDRV_PCM_STREAM_PLAYBACK:
card = substream->pcm->card;
if (runtime->status->state == SNDRV_PCM_STATE_OPEN ||
- runtime->status->state == SNDRV_PCM_STATE_DISCONNECTED)
+ runtime->status->state == SNDRV_PCM_STATE_DISCONNECTED ||
+ runtime->status->state == SNDRV_PCM_STATE_SUSPENDED)
return -EBADFD;
- snd_power_lock(card);
- if (runtime->status->state == SNDRV_PCM_STATE_SUSPENDED) {
- result = snd_power_wait(card, SNDRV_CTL_POWER_D0);
- if (result < 0)
- goto _unlock;
- }
-
snd_pcm_stream_lock_irq(substream);
/* resume pause */
if (runtime->status->state == SNDRV_PCM_STATE_PAUSED)
snd_pcm_stop(substream, SNDRV_PCM_STATE_SETUP);
/* runtime->control->appl_ptr = runtime->status->hw_ptr; */
snd_pcm_stream_unlock_irq(substream);
- _unlock:
- snd_power_unlock(card);
+
return result;
}
mutex_lock(&rmidi->open_mutex);
while (1) {
subdevice = -1;
- down_read(&card->controls_rwsem);
+ read_lock(&card->ctl_files_rwlock);
list_for_each_entry(kctl, &card->ctl_files, list) {
if (kctl->pid == current->pid) {
subdevice = kctl->prefer_rawmidi_subdevice;
break;
}
}
- up_read(&card->controls_rwsem);
+ read_unlock(&card->ctl_files_rwlock);
err = snd_rawmidi_kernel_open(rmidi->card, rmidi->device,
subdevice, fflags, rawmidi_file);
if (err >= 0)
params = prtd->params;
/* Disable the PDC and save the PDC registers */
- ssc_writex(params->ssc->regs, PDC_PTCR, params->mask->pdc_disable);
+ ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR,
+ params->mask->pdc_disable);
prtd->pdc_xpr_save = ssc_readx(params->ssc->regs, params->pdc->xpr);
prtd->pdc_xcr_save = ssc_readx(params->ssc->regs, params->pdc->xcr);
ssc_writex(params->ssc->regs, params->pdc->xnpr, prtd->pdc_xnpr_save);
ssc_writex(params->ssc->regs, params->pdc->xncr, prtd->pdc_xncr_save);
- ssc_writex(params->ssc->regs, PDC_PTCR, params->mask->pdc_enable);
+ ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, params->mask->pdc_enable);
return 0;
}
#else /* CONFIG_PM */
git.openpandora.org / pandora-kernel.git / commitdiff