pcmcia: use pcmcia_loop_config in pata and ide drivers

Use the config loop helper in pata_pcmcia and ide_cs

CC: Tejun Heo <htejun@gmail.com>
CC: Alan Cox <alan@lxorguk.ukuu.org.uk>
CC: linux-ide@vger.kernel.org
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index 41b4361..8cccd1b 100644 (file)
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -148,6 +148,69 @@ static struct ata_port_operations pcmcia_8bit_port_ops = {
 #define CS_CHECK(fn, ret) \
 do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
 
+
+struct pcmcia_config_check {
+       config_info_t conf;
+       cistpl_cftable_entry_t dflt;
+       unsigned long ctl_base;
+       int skip_vcc;
+       int is_kme;
+};
+
+static int pcmcia_check_one_config(struct pcmcia_device *pdev,
+                                  cistpl_cftable_entry_t *cfg,
+                                  void *priv_data)
+{
+       struct pcmcia_config_check *stk = priv_data;
+
+       /* Check for matching Vcc, unless we're desperate */
+       if (!stk->skip_vcc) {
+               if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+                       if (stk->conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000)
+                               goto next_entry;
+               } else if (stk->dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) {
+                       if (stk->conf.Vcc != stk->dflt.vcc.param[CISTPL_POWER_VNOM] / 10000)
+                               goto next_entry;
+               }
+       }
+
+       if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
+               pdev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+       else if (stk->dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
+               pdev->conf.Vpp = stk->dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
+
+       if ((cfg->io.nwin > 0) || (stk->dflt.io.nwin > 0)) {
+               cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &stk->dflt.io;
+               pdev->conf.ConfigIndex = cfg->index;
+               pdev->io.BasePort1 = io->win[0].base;
+               pdev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
+               if (!(io->flags & CISTPL_IO_16BIT))
+                       pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+               if (io->nwin == 2) {
+                       pdev->io.NumPorts1 = 8;
+                       pdev->io.BasePort2 = io->win[1].base;
+                       pdev->io.NumPorts2 = (stk->is_kme) ? 2 : 1;
+                       if (pcmcia_request_io(pdev, &pdev->io) != 0)
+                               goto next_entry;
+                       stk->ctl_base = pdev->io.BasePort2;
+               } else if ((io->nwin == 1) && (io->win[0].len >= 16)) {
+                       pdev->io.NumPorts1 = io->win[0].len;
+                       pdev->io.NumPorts2 = 0;
+                       if (pcmcia_request_io(pdev, &pdev->io) != 0)
+                               goto next_entry;
+                       stk->ctl_base = pdev->io.BasePort1 + 0x0e;
+               } else
+                       goto next_entry;
+               /* If we've got this far, we're done */
+               return 0;
+       }
+next_entry:
+       if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
+               memcpy(&stk->dflt, cfg, sizeof(stk->dflt));
+
+       return -ENODEV;
+}
+
 /**
  *     pcmcia_init_one         -       attach a PCMCIA interface
  *     @pdev: pcmcia device
@@ -161,19 +224,11 @@ static int pcmcia_init_one(struct pcmcia_device *pdev)
        struct ata_host *host;
        struct ata_port *ap;
        struct ata_pcmcia_info *info;
-       tuple_t tuple;
-       struct {
-               unsigned short buf[128];
-               cisparse_t parse;
-               config_info_t conf;
-               cistpl_cftable_entry_t dflt;
-       } *stk = NULL;
-       cistpl_cftable_entry_t *cfg;
-       int pass, last_ret = 0, last_fn = 0, is_kme = 0, ret = -ENOMEM, p;
+       struct pcmcia_config_check *stk = NULL;
+       int last_ret = 0, last_fn = 0, is_kme = 0, ret = -ENOMEM, p;
        unsigned long io_base, ctl_base;
        void __iomem *io_addr, *ctl_addr;
        int n_ports = 1;
-
        struct ata_port_operations *ops = &pcmcia_port_ops;
 
        info = kzalloc(sizeof(*info), GFP_KERNEL);
@@ -193,96 +248,30 @@ static int pcmcia_init_one(struct pcmcia_device *pdev)
        pdev->conf.Attributes = CONF_ENABLE_IRQ;
        pdev->conf.IntType = INT_MEMORY_AND_IO;
 
-       /* Allocate resoure probing structures */
-
-       stk = kzalloc(sizeof(*stk), GFP_KERNEL);
-       if (!stk)
-               goto out1;
-
-       cfg = &stk->parse.cftable_entry;
-
-       /* Tuples we are walking */
-       tuple.TupleData = (cisdata_t *)&stk->buf;
-       tuple.TupleOffset = 0;
-       tuple.TupleDataMax = 255;
-       tuple.Attributes = 0;
-
        /* See if we have a manufacturer identifier. Use it to set is_kme for
           vendor quirks */
        is_kme = ((pdev->manf_id == MANFID_KME) &&
                  ((pdev->card_id == PRODID_KME_KXLC005_A) ||
                   (pdev->card_id == PRODID_KME_KXLC005_B)));
 
-       /* Not sure if this is right... look up the current Vcc */
-       CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(pdev, &stk->conf));
-/*     link->conf.Vcc = stk->conf.Vcc; */
-
-       pass = io_base = ctl_base = 0;
-       tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
-       tuple.Attributes = 0;
-       CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(pdev, &tuple));
+       /* Allocate resoure probing structures */
 
-       /* Now munch the resources looking for a suitable set */
-       while (1) {
-               if (pcmcia_get_tuple_data(pdev, &tuple) != 0)
-                       goto next_entry;
-               if (pcmcia_parse_tuple(pdev, &tuple, &stk->parse) != 0)
-                       goto next_entry;
-               /* Check for matching Vcc, unless we're desperate */
-               if (!pass) {
-                       if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
-                               if (stk->conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000)
-                                       goto next_entry;
-                       } else if (stk->dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) {
-                               if (stk->conf.Vcc != stk->dflt.vcc.param[CISTPL_POWER_VNOM] / 10000)
-                                       goto next_entry;
-                       }
-               }
+       stk = kzalloc(sizeof(*stk), GFP_KERNEL);
+       if (!stk)
+               goto out1;
+       stk->is_kme = is_kme;
 
-               if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
-                       pdev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
-               else if (stk->dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
-                       pdev->conf.Vpp = stk->dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
-
-               if ((cfg->io.nwin > 0) || (stk->dflt.io.nwin > 0)) {
-                       cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &stk->dflt.io;
-                       pdev->conf.ConfigIndex = cfg->index;
-                       pdev->io.BasePort1 = io->win[0].base;
-                       pdev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
-                       if (!(io->flags & CISTPL_IO_16BIT))
-                               pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-                       if (io->nwin == 2) {
-                               pdev->io.NumPorts1 = 8;
-                               pdev->io.BasePort2 = io->win[1].base;
-                               pdev->io.NumPorts2 = (is_kme) ? 2 : 1;
-                               if (pcmcia_request_io(pdev, &pdev->io) != 0)
-                                       goto next_entry;
-                               io_base = pdev->io.BasePort1;
-                               ctl_base = pdev->io.BasePort2;
-                       } else if ((io->nwin == 1) && (io->win[0].len >= 16)) {
-                               pdev->io.NumPorts1 = io->win[0].len;
-                               pdev->io.NumPorts2 = 0;
-                               if (pcmcia_request_io(pdev, &pdev->io) != 0)
-                                       goto next_entry;
-                               io_base = pdev->io.BasePort1;
-                               ctl_base = pdev->io.BasePort1 + 0x0e;
-                       } else
-                               goto next_entry;
-                       /* If we've got this far, we're done */
-                       break;
-               }
-next_entry:
-               if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
-                       memcpy(&stk->dflt, cfg, sizeof(stk->dflt));
-               if (pass) {
-                       CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(pdev, &tuple));
-               } else if (pcmcia_get_next_tuple(pdev, &tuple) != 0) {
-                       CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(pdev, &tuple));
-                       memset(&stk->dflt, 0, sizeof(stk->dflt));
-                       pass++;
-               }
+       /* Not sure if this is right... look up the current Vcc */
+       CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(pdev, &stk->conf));
+       stk->skip_vcc = io_base = ctl_base = 0;
+       if (pcmcia_loop_config(pdev, pcmcia_check_one_config, stk)) {
+               memset(&stk->dflt, 0, sizeof(stk->dflt));
+               stk->skip_vcc = 1;
+               if (pcmcia_loop_config(pdev, pcmcia_check_one_config, stk))
+                       goto failed; /* No suitable config found */
        }
-
+       io_base = pdev->io.BasePort1;
+       ctl_base = stk->ctl_base;
        CS_CHECK(RequestIRQ, pcmcia_request_irq(pdev, &pdev->irq));
        CS_CHECK(RequestConfiguration, pcmcia_request_configuration(pdev, &pdev->conf));
 

diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c
index 21bfac1..8580bec 100644 (file)
--- a/drivers/ide/legacy/ide-cs.c
+++ b/drivers/ide/legacy/ide-cs.c
@@ -220,103 +220,98 @@ out_release:
 #define CS_CHECK(fn, ret) \
 do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
 
+struct pcmcia_config_check {
+       config_info_t conf;
+       cistpl_cftable_entry_t dflt;
+       unsigned long ctl_base;
+       int skip_vcc;
+       int is_kme;
+};
+
+static int pcmcia_check_one_config(struct pcmcia_device *pdev,
+                                  cistpl_cftable_entry_t *cfg,
+                                  void *priv_data)
+{
+       struct pcmcia_config_check *stk = priv_data;
+
+       /* Check for matching Vcc, unless we're desperate */
+       if (!stk->skip_vcc) {
+               if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+                       if (stk->conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000)
+                               goto next_entry;
+               } else if (stk->dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) {
+                       if (stk->conf.Vcc != stk->dflt.vcc.param[CISTPL_POWER_VNOM] / 10000)
+                               goto next_entry;
+               }
+       }
+
+       if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
+               pdev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+       else if (stk->dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
+               pdev->conf.Vpp = stk->dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
+
+       if ((cfg->io.nwin > 0) || (stk->dflt.io.nwin > 0)) {
+               cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &stk->dflt.io;
+               pdev->conf.ConfigIndex = cfg->index;
+               pdev->io.BasePort1 = io->win[0].base;
+               pdev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
+               if (!(io->flags & CISTPL_IO_16BIT))
+                       pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+               if (io->nwin == 2) {
+                       pdev->io.NumPorts1 = 8;
+                       pdev->io.BasePort2 = io->win[1].base;
+                       pdev->io.NumPorts2 = (stk->is_kme) ? 2 : 1;
+                       if (pcmcia_request_io(pdev, &pdev->io) != 0)
+                               goto next_entry;
+                       stk->ctl_base = pdev->io.BasePort2;
+               } else if ((io->nwin == 1) && (io->win[0].len >= 16)) {
+                       pdev->io.NumPorts1 = io->win[0].len;
+                       pdev->io.NumPorts2 = 0;
+                       if (pcmcia_request_io(pdev, &pdev->io) != 0)
+                               goto next_entry;
+                       stk->ctl_base = pdev->io.BasePort1 + 0x0e;
+               } else
+                       goto next_entry;
+               /* If we've got this far, we're done */
+               return 0;
+       }
+next_entry:
+       if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
+               memcpy(&stk->dflt, cfg, sizeof(stk->dflt));
+
+       return -ENODEV;
+}
+
 static int ide_config(struct pcmcia_device *link)
 {
     ide_info_t *info = link->priv;
-    tuple_t tuple;
-    struct {
-       u_short         buf[128];
-       cisparse_t      parse;
-       config_info_t   conf;
-       cistpl_cftable_entry_t dflt;
-    } *stk = NULL;
-    cistpl_cftable_entry_t *cfg;
-    int pass, last_ret = 0, last_fn = 0, is_kme = 0;
+    struct pcmcia_config_check *stk = NULL;
+    int last_ret = 0, last_fn = 0, is_kme = 0;
     unsigned long io_base, ctl_base;
     struct ide_host *host;
 
     DEBUG(0, "ide_config(0x%p)\n", link);
 
-    stk = kzalloc(sizeof(*stk), GFP_KERNEL);
-    if (!stk) goto err_mem;
-    cfg = &stk->parse.cftable_entry;
-
-    tuple.TupleData = (cisdata_t *)&stk->buf;
-    tuple.TupleOffset = 0;
-    tuple.TupleDataMax = 255;
-    tuple.Attributes = 0;
-
     is_kme = ((link->manf_id == MANFID_KME) &&
              ((link->card_id == PRODID_KME_KXLC005_A) ||
               (link->card_id == PRODID_KME_KXLC005_B)));
 
+    stk = kzalloc(sizeof(*stk), GFP_KERNEL);
+    if (!stk)
+           goto err_mem;
+    stk->is_kme = is_kme;
+
     /* Not sure if this is right... look up the current Vcc */
     CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(link, &stk->conf));
-
-    pass = io_base = ctl_base = 0;
-    tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
-    tuple.Attributes = 0;
-    CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
-    while (1) {
-       if (pcmcia_get_tuple_data(link, &tuple) != 0) goto next_entry;
-       if (pcmcia_parse_tuple(link, &tuple, &stk->parse) != 0) goto next_entry;
-
-       /* Check for matching Vcc, unless we're desperate */
-       if (!pass) {
-           if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
-               if (stk->conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000)
-                   goto next_entry;
-           } else if (stk->dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) {
-               if (stk->conf.Vcc != stk->dflt.vcc.param[CISTPL_POWER_VNOM] / 10000)
-                   goto next_entry;
-           }
-       }
-
-       if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
-           link->conf.Vpp =
-               cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
-       else if (stk->dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
-           link->conf.Vpp =
-               stk->dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
-
-       if ((cfg->io.nwin > 0) || (stk->dflt.io.nwin > 0)) {
-           cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &stk->dflt.io;
-           link->conf.ConfigIndex = cfg->index;
-           link->io.BasePort1 = io->win[0].base;
-           link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
-           if (!(io->flags & CISTPL_IO_16BIT))
-               link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-           if (io->nwin == 2) {
-               link->io.NumPorts1 = 8;
-               link->io.BasePort2 = io->win[1].base;
-               link->io.NumPorts2 = (is_kme) ? 2 : 1;
-               if (pcmcia_request_io(link, &link->io) != 0)
-                       goto next_entry;
-               io_base = link->io.BasePort1;
-               ctl_base = link->io.BasePort2;
-           } else if ((io->nwin == 1) && (io->win[0].len >= 16)) {
-               link->io.NumPorts1 = io->win[0].len;
-               link->io.NumPorts2 = 0;
-               if (pcmcia_request_io(link, &link->io) != 0)
-                       goto next_entry;
-               io_base = link->io.BasePort1;
-               ctl_base = link->io.BasePort1 + 0x0e;
-           } else goto next_entry;
-           /* If we've got this far, we're done */
-           break;
-       }
-
-    next_entry:
-       if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
-           memcpy(&stk->dflt, cfg, sizeof(stk->dflt));
-       if (pass) {
-           CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple));
-       } else if (pcmcia_get_next_tuple(link, &tuple) != 0) {
-           CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
+    stk->skip_vcc = io_base = ctl_base = 0;
+    if (pcmcia_loop_config(link, pcmcia_check_one_config, stk)) {
            memset(&stk->dflt, 0, sizeof(stk->dflt));
-           pass++;
-       }
+           stk->skip_vcc = 1;
+           if (pcmcia_loop_config(link, pcmcia_check_one_config, stk))
+                   goto failed; /* No suitable config found */
     }
+    io_base = link->io.BasePort1;
+    ctl_base = stk->ctl_base;
 
     CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
     CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));