[libata sata_mv] minor fixes

- clear SError and EDMA irq cause registers, after re-init'ing the phy
- move enums with type suffix 'U' to their own enum

diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c
index 257c128..82d1750 100644 (file)
--- a/drivers/scsi/sata_mv.c
+++ b/drivers/scsi/sata_mv.c
@@ -72,11 +72,6 @@ enum {
        MV_SG_TBL_SZ            = (16 * MV_MAX_SG_CT),
        MV_PORT_PRIV_DMA_SZ     = (MV_CRQB_Q_SZ + MV_CRPB_Q_SZ + MV_SG_TBL_SZ),
 
-       /* Our DMA boundary is determined by an ePRD being unable to handle
-        * anything larger than 64KB
-        */
-       MV_DMA_BOUNDARY         = 0xffffU,
-
        MV_PORTS_PER_HC         = 4,
        /* == (port / MV_PORTS_PER_HC) to determine HC from 0-7 port */
        MV_PORT_HC_SHIFT        = 2,
@@ -192,7 +187,6 @@ enum {
 
        EDMA_REQ_Q_BASE_HI_OFS  = 0x10,
        EDMA_REQ_Q_IN_PTR_OFS   = 0x14,         /* also contains BASE_LO */
-       EDMA_REQ_Q_BASE_LO_MASK = 0xfffffc00U,
 
        EDMA_REQ_Q_OUT_PTR_OFS  = 0x18,
        EDMA_REQ_Q_PTR_SHIFT    = 5,
@@ -200,7 +194,6 @@ enum {
        EDMA_RSP_Q_BASE_HI_OFS  = 0x1c,
        EDMA_RSP_Q_IN_PTR_OFS   = 0x20,
        EDMA_RSP_Q_OUT_PTR_OFS  = 0x24,         /* also contains BASE_LO */
-       EDMA_RSP_Q_BASE_LO_MASK = 0xffffff00U,
        EDMA_RSP_Q_PTR_SHIFT    = 3,
 
        EDMA_CMD_OFS            = 0x28,
@@ -216,6 +209,17 @@ enum {
        MV_PP_FLAG_EDMA_DS_ACT  = (1 << 1),
 };
 
+enum {
+       /* Our DMA boundary is determined by an ePRD being unable to handle
+        * anything larger than 64KB
+        */
+       MV_DMA_BOUNDARY         = 0xffffU,
+
+       EDMA_REQ_Q_BASE_LO_MASK = 0xfffffc00U,
+
+       EDMA_RSP_Q_BASE_LO_MASK = 0xffffff00U,
+};
+
 /* Command ReQuest Block: 32B */
 struct mv_crqb {
        u32                     sg_addr;
@@ -1215,6 +1219,7 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance,
  */
 static void mv_phy_reset(struct ata_port *ap)
 {
+       struct mv_port_priv *pp = ap->private_data;
        void __iomem *port_mmio = mv_ap_base(ap);
        struct ata_taskfile tf;
        struct ata_device *dev = &ap->device[0];
@@ -1232,7 +1237,7 @@ static void mv_phy_reset(struct ata_port *ap)
         */
        writelfl(0, port_mmio + EDMA_CMD_OFS);
 
-       VPRINTK("S-regs after ATA_RST: SStat 0x%08x SErr 0x%08x "
+       DPRINTK("S-regs after ATA_RST: SStat 0x%08x SErr 0x%08x "
                "SCtrl 0x%08x\n", mv_scr_read(ap, SCR_STATUS),
                mv_scr_read(ap, SCR_ERROR), mv_scr_read(ap, SCR_CONTROL));
 
@@ -1247,7 +1252,9 @@ static void mv_phy_reset(struct ata_port *ap)
                        break;
        } while (time_before(jiffies, timeout));
 
-       VPRINTK("S-regs after PHY wake: SStat 0x%08x SErr 0x%08x "
+       mv_scr_write(ap, SCR_ERROR, mv_scr_read(ap, SCR_ERROR));
+
+       DPRINTK("S-regs after PHY wake: SStat 0x%08x SErr 0x%08x "
                "SCtrl 0x%08x\n", mv_scr_read(ap, SCR_STATUS),
                mv_scr_read(ap, SCR_ERROR), mv_scr_read(ap, SCR_CONTROL));
 
@@ -1271,7 +1278,12 @@ static void mv_phy_reset(struct ata_port *ap)
                VPRINTK("Port disabled post-sig: No device present.\n");
                ata_port_disable(ap);
        }
-       VPRINTK("EXIT\n");
+
+       writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
+
+       pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN;
+
+       printk("EXIT\n");
 }
 
 /**