USB Serial Sierra: TRU-Install feature update

Moves responsbility of TRU-Install (i.e. ZeroCD) to the usb-storage
driver. See patch 04/04 of this set.

Signed-off-by: Kevin Lloyd <klloyd@sierrawireless.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index 8878c17..70338f4 100644 (file)
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -499,9 +499,10 @@ config USB_SERIAL_SAFE_PADDED
 config USB_SERIAL_SIERRAWIRELESS
        tristate "USB Sierra Wireless Driver"
        help
-         Say M here if you want to use a Sierra Wireless device (if
-         using an PC 5220 or AC580 please use the Airprime driver
-         instead).
+         Say M here if you want to use Sierra Wireless devices.
+
+         Many deviecs have a feature known as TRU-Install, for those devices
+         to work properly the USB Storage Sierra feature must be enabled.
 
          To compile this driver as a module, choose M here: the
          module will be called sierra.

diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index e2a7463..6b7ed33 100644 (file)
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -14,7 +14,7 @@
   Whom based his on the Keyspan driver by Hugh Blemings <hugh@blemings.org>
 */
 
-#define DRIVER_VERSION "v.1.2.9c"
+#define DRIVER_VERSION "v.1.2.13a"
 #define DRIVER_AUTHOR "Kevin Lloyd <klloyd@sierrawireless.com>"
 #define DRIVER_DESC "USB Driver for Sierra Wireless USB modems"
 
@@ -31,6 +31,7 @@
 #define SWIMS_USB_REQUEST_SetPower     0x00
 #define SWIMS_USB_REQUEST_SetNmea      0x07
 #define SWIMS_USB_REQUEST_SetMode      0x0B
+#define SWIMS_USB_REQUEST_GetSwocInfo  0x0A
 #define SWIMS_SET_MODE_Modem           0x0001
 
 /* per port private data */
@@ -40,13 +41,6 @@
 
 static int debug;
 static int nmea;
-static int truinstall = 1;
-
-enum devicetype {
-       DEVICE_3_PORT =         0,
-       DEVICE_1_PORT =         1,
-       DEVICE_INSTALLER =      2,
-};
 
 static int sierra_set_power_state(struct usb_device *udev, __u16 swiState)
 {
@@ -63,21 +57,6 @@ static int sierra_set_power_state(struct usb_device *udev, __u16 swiState)
        return result;
 }
 
-static int sierra_set_ms_mode(struct usb_device *udev, __u16 eSWocMode)
-{
-       int result;
-       dev_dbg(&udev->dev,  "%s", __func__);
-       result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
-                       SWIMS_USB_REQUEST_SetMode,      /* __u8 request      */
-                       USB_TYPE_VENDOR,                /* __u8 request type */
-                       eSWocMode,                      /* __u16 value       */
-                       0x0000,                         /* __u16 index       */
-                       NULL,                           /* void *data        */
-                       0,                              /* __u16 size        */
-                       USB_CTRL_SET_TIMEOUT);          /* int timeout       */
-       return result;
-}
-
 static int sierra_vsc_set_nmea(struct usb_device *udev, __u16 enable)
 {
        int result;
@@ -163,15 +142,8 @@ static int sierra_probe(struct usb_serial *serial,
                usb_set_interface(udev, ifnum, 1);
        }
 
-       /* Check if in installer mode */
-       if (truinstall && id->driver_info == DEVICE_INSTALLER) {
-               dev_dbg(&udev->dev, "%s", "FOUND TRU-INSTALL DEVICE(SW)\n");
-               result = sierra_set_ms_mode(udev, SWIMS_SET_MODE_Modem);
-               /* Don't bind to the device when in installer mode */
-               kfree(num_ports);
-               return -EIO;
        /* Dummy interface present on some SKUs should be ignored */
-       } else if (ifnum == 0x99)
+       if (ifnum == 0x99)
                *num_ports = 0;
        else if (numendpoints <= 3)
                *num_ports = 1;
@@ -237,7 +209,6 @@ static struct usb_device_id id_table [] = {
        { USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless AirCard 580 */
        { USB_DEVICE(0x0F3D, 0x0112) }, /* Airprime/Sierra PC 5220 */
 
-       { USB_DEVICE(0x1199, 0x0FFF), .driver_info = DEVICE_INSTALLER},
        { }
 };
 MODULE_DEVICE_TABLE(usb, id_table);