obj-$(CONFIG_MACH_REALVIEW_PB1176) += realview_pb1176.o
obj-$(CONFIG_MACH_REALVIEW_PBA8) += realview_pba8.o
obj-$(CONFIG_MACH_REALVIEW_PBX) += realview_pbx.o
-obj-$(CONFIG_SMP) += platsmp.o headsmp.o
+obj-$(CONFIG_SMP) += platsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
+++ /dev/null
-/*
- * linux/arch/arm/mach-realview/headsmp.S
- *
- * Copyright (c) 2003 ARM Limited
- * All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-
- __INIT
-
-/*
- * Realview specific entry point for secondary CPUs. This provides
- * a "holding pen" into which all secondary cores are held until we're
- * ready for them to initialise.
- */
-ENTRY(realview_secondary_startup)
- mrc p15, 0, r0, c0, c0, 5
- and r0, r0, #15
- adr r4, 1f
- ldmia r4, {r5, r6}
- sub r4, r4, r5
- add r6, r6, r4
-pen: ldr r7, [r6]
- cmp r7, r0
- bne pen
-
- /*
- * we've been released from the holding pen: secondary_stack
- * should now contain the SVC stack for this core
- */
- b secondary_startup
-
- .align
-1: .long .
- .long pen_release
*/
#include <linux/init.h>
#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/jiffies.h>
#include <linux/smp.h>
#include <linux/io.h>
-#include <asm/cacheflush.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
+#include <asm/smp_scu.h>
#include <asm/unified.h>
#include <mach/board-eb.h>
#include <mach/board-pb11mp.h>
#include <mach/board-pbx.h>
-#include <asm/smp_scu.h>
#include "core.h"
-extern void realview_secondary_startup(void);
-
-/*
- * control for which core is the next to come out of the secondary
- * boot "holding pen"
- */
-volatile int __cpuinitdata pen_release = -1;
-
-/*
- * Write pen_release in a way that is guaranteed to be visible to all
- * observers, irrespective of whether they're taking part in coherency
- * or not. This is necessary for the hotplug code to work reliably.
- */
-static void __cpuinit write_pen_release(int val)
-{
- pen_release = val;
- smp_wmb();
- __cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
- outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
-}
+extern void versatile_secondary_startup(void);
static void __iomem *scu_base_addr(void)
{
return (void __iomem *)0;
}
-static DEFINE_SPINLOCK(boot_lock);
-
-void __cpuinit platform_secondary_init(unsigned int cpu)
-{
- /*
- * if any interrupts are already enabled for the primary
- * core (e.g. timer irq), then they will not have been enabled
- * for us: do so
- */
- gic_secondary_init(0);
-
- /*
- * let the primary processor know we're out of the
- * pen, then head off into the C entry point
- */
- write_pen_release(-1);
-
- /*
- * Synchronise with the boot thread.
- */
- spin_lock(&boot_lock);
- spin_unlock(&boot_lock);
-}
-
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
-{
- unsigned long timeout;
-
- /*
- * set synchronisation state between this boot processor
- * and the secondary one
- */
- spin_lock(&boot_lock);
-
- /*
- * The secondary processor is waiting to be released from
- * the holding pen - release it, then wait for it to flag
- * that it has been released by resetting pen_release.
- *
- * Note that "pen_release" is the hardware CPU ID, whereas
- * "cpu" is Linux's internal ID.
- */
- write_pen_release(cpu);
-
- /*
- * Send the secondary CPU a soft interrupt, thereby causing
- * the boot monitor to read the system wide flags register,
- * and branch to the address found there.
- */
- smp_cross_call(cpumask_of(cpu), 1);
-
- timeout = jiffies + (1 * HZ);
- while (time_before(jiffies, timeout)) {
- smp_rmb();
- if (pen_release == -1)
- break;
-
- udelay(10);
- }
-
- /*
- * now the secondary core is starting up let it run its
- * calibrations, then wait for it to finish
- */
- spin_unlock(&boot_lock);
-
- return pen_release != -1 ? -ENOSYS : 0;
-}
-
/*
* Initialise the CPU possible map early - this describes the CPUs
* which may be present or become present in the system.
* until it receives a soft interrupt, and then the
* secondary CPU branches to this address.
*/
- __raw_writel(BSYM(virt_to_phys(realview_secondary_startup)),
+ __raw_writel(BSYM(virt_to_phys(versatile_secondary_startup)),
__io_address(REALVIEW_SYS_FLAGSSET));
}
obj-y := v2m.o
obj-$(CONFIG_ARCH_VEXPRESS_CA9X4) += ct-ca9x4.o
-obj-$(CONFIG_SMP) += platsmp.o headsmp.o
+obj-$(CONFIG_SMP) += platsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
*/
#include <linux/init.h>
#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/jiffies.h>
#include <linux/smp.h>
#include <linux/io.h>
-#include <asm/cacheflush.h>
#include <asm/smp_scu.h>
#include <asm/unified.h>
#include "core.h"
-extern void vexpress_secondary_startup(void);
-
-/*
- * control for which core is the next to come out of the secondary
- * boot "holding pen"
- */
-volatile int __cpuinitdata pen_release = -1;
-
-/*
- * Write pen_release in a way that is guaranteed to be visible to all
- * observers, irrespective of whether they're taking part in coherency
- * or not. This is necessary for the hotplug code to work reliably.
- */
-static void __cpuinit write_pen_release(int val)
-{
- pen_release = val;
- smp_wmb();
- __cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
- outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
-}
+extern void versatile_secondary_startup(void);
static void __iomem *scu_base_addr(void)
{
return MMIO_P2V(A9_MPCORE_SCU);
}
-static DEFINE_SPINLOCK(boot_lock);
-
-void __cpuinit platform_secondary_init(unsigned int cpu)
-{
- /*
- * if any interrupts are already enabled for the primary
- * core (e.g. timer irq), then they will not have been enabled
- * for us: do so
- */
- gic_secondary_init(0);
-
- /*
- * let the primary processor know we're out of the
- * pen, then head off into the C entry point
- */
- write_pen_release(-1);
-
- /*
- * Synchronise with the boot thread.
- */
- spin_lock(&boot_lock);
- spin_unlock(&boot_lock);
-}
-
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
-{
- unsigned long timeout;
-
- /*
- * Set synchronisation state between this boot processor
- * and the secondary one
- */
- spin_lock(&boot_lock);
-
- /*
- * This is really belt and braces; we hold unintended secondary
- * CPUs in the holding pen until we're ready for them. However,
- * since we haven't sent them a soft interrupt, they shouldn't
- * be there.
- */
- write_pen_release(cpu);
-
- /*
- * Send the secondary CPU a soft interrupt, thereby causing
- * the boot monitor to read the system wide flags register,
- * and branch to the address found there.
- */
- smp_cross_call(cpumask_of(cpu), 1);
-
- timeout = jiffies + (1 * HZ);
- while (time_before(jiffies, timeout)) {
- smp_rmb();
- if (pen_release == -1)
- break;
-
- udelay(10);
- }
-
- /*
- * now the secondary core is starting up let it run its
- * calibrations, then wait for it to finish
- */
- spin_unlock(&boot_lock);
-
- return pen_release != -1 ? -ENOSYS : 0;
-}
-
/*
* Initialise the CPU possible map early - this describes the CPUs
* which may be present or become present in the system.
* secondary CPU branches to this address.
*/
writel(~0, MMIO_P2V(V2M_SYS_FLAGSCLR));
- writel(BSYM(virt_to_phys(vexpress_secondary_startup)),
+ writel(BSYM(virt_to_phys(versatile_secondary_startup)),
MMIO_P2V(V2M_SYS_FLAGSSET));
}
obj-$(CONFIG_PLAT_VERSATILE_FPGA_IRQ) += fpga-irq.o
obj-$(CONFIG_PLAT_VERSATILE_LEDS) += leds.o
obj-$(CONFIG_PLAT_VERSATILE_SCHED_CLOCK) += sched-clock.o
-
+obj-$(CONFIG_SMP) += headsmp.o platsmp.o
/*
- * linux/arch/arm/mach-vexpress/headsmp.S
+ * linux/arch/arm/plat-versatile/headsmp.S
*
* Copyright (c) 2003 ARM Limited
* All Rights Reserved
__INIT
/*
- * Versatile Express specific entry point for secondary CPUs. This
- * provides a "holding pen" into which all secondary cores are held
+ * Realview/Versatile Express specific entry point for secondary CPUs.
+ * This provides a "holding pen" into which all secondary cores are held
* until we're ready for them to initialise.
*/
-ENTRY(vexpress_secondary_startup)
+ENTRY(versatile_secondary_startup)
mrc p15, 0, r0, c0, c0, 5
and r0, r0, #15
adr r4, 1f
--- /dev/null
+/*
+ * linux/arch/arm/plat-versatile/platsmp.c
+ *
+ * Copyright (C) 2002 ARM Ltd.
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/jiffies.h>
+#include <linux/smp.h>
+
+#include <asm/cacheflush.h>
+
+/*
+ * control for which core is the next to come out of the secondary
+ * boot "holding pen"
+ */
+volatile int __cpuinitdata pen_release = -1;
+
+/*
+ * Write pen_release in a way that is guaranteed to be visible to all
+ * observers, irrespective of whether they're taking part in coherency
+ * or not. This is necessary for the hotplug code to work reliably.
+ */
+static void __cpuinit write_pen_release(int val)
+{
+ pen_release = val;
+ smp_wmb();
+ __cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
+ outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
+}
+
+static DEFINE_SPINLOCK(boot_lock);
+
+void __cpuinit platform_secondary_init(unsigned int cpu)
+{
+ /*
+ * if any interrupts are already enabled for the primary
+ * core (e.g. timer irq), then they will not have been enabled
+ * for us: do so
+ */
+ gic_secondary_init(0);
+
+ /*
+ * let the primary processor know we're out of the
+ * pen, then head off into the C entry point
+ */
+ write_pen_release(-1);
+
+ /*
+ * Synchronise with the boot thread.
+ */
+ spin_lock(&boot_lock);
+ spin_unlock(&boot_lock);
+}
+
+int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+ unsigned long timeout;
+
+ /*
+ * Set synchronisation state between this boot processor
+ * and the secondary one
+ */
+ spin_lock(&boot_lock);
+
+ /*
+ * This is really belt and braces; we hold unintended secondary
+ * CPUs in the holding pen until we're ready for them. However,
+ * since we haven't sent them a soft interrupt, they shouldn't
+ * be there.
+ */
+ write_pen_release(cpu);
+
+ /*
+ * Send the secondary CPU a soft interrupt, thereby causing
+ * the boot monitor to read the system wide flags register,
+ * and branch to the address found there.
+ */
+ smp_cross_call(cpumask_of(cpu), 1);
+
+ timeout = jiffies + (1 * HZ);
+ while (time_before(jiffies, timeout)) {
+ smp_rmb();
+ if (pen_release == -1)
+ break;
+
+ udelay(10);
+ }
+
+ /*
+ * now the secondary core is starting up let it run its
+ * calibrations, then wait for it to finish
+ */
+ spin_unlock(&boot_lock);
+
+ return pen_release != -1 ? -ENOSYS : 0;
+}
git.openpandora.org / pandora-kernel.git / commitdiff