mmc: add erase, secure erase, trim and secure trim operations
authorAdrian Hunter <adrian.hunter@nokia.com>
Wed, 11 Aug 2010 21:17:46 +0000 (14:17 -0700)
committerLinus Torvalds <torvalds@linux-foundation.org>
Thu, 12 Aug 2010 15:43:30 +0000 (08:43 -0700)
commitdfe86cba7676d58db8de7e623f5e72f1b0d3ca35
treeed7e6a267c50e0ba2374dc6895515d7a100961a3
parent81d73a32d775ae9674ea6edf0b5b721fc3bc57d9
mmc: add erase, secure erase, trim and secure trim operations

SD/MMC cards tend to support an erase operation.  In addition, eMMC v4.4
cards can support secure erase, trim and secure trim operations that are
all variants of the basic erase command.

SD/MMC device attributes "erase_size" and "preferred_erase_size" have been
added.

"erase_size" is the minimum size, in bytes, of an erase operation.  For
MMC, "erase_size" is the erase group size reported by the card.  Note that
"erase_size" does not apply to trim or secure trim operations where the
minimum size is always one 512 byte sector.  For SD, "erase_size" is 512
if the card is block-addressed, 0 otherwise.

SD/MMC cards can erase an arbitrarily large area up to and
including the whole card.  When erasing a large area it may
be desirable to do it in smaller chunks for three reasons:

    1. A single erase command will make all other I/O on the card
       wait.  This is not a problem if the whole card is being erased, but
       erasing one partition will make I/O for another partition on the
       same card wait for the duration of the erase - which could be a
       several minutes.

    2. To be able to inform the user of erase progress.

    3. The erase timeout becomes too large to be very useful.
       Because the erase timeout contains a margin which is multiplied by
       the size of the erase area, the value can end up being several
       minutes for large areas.

"erase_size" is not the most efficient unit to erase (especially for SD
where it is just one sector), hence "preferred_erase_size" provides a good
chunk size for erasing large areas.

For MMC, "preferred_erase_size" is the high-capacity erase size if a card
specifies one, otherwise it is based on the capacity of the card.

For SD, "preferred_erase_size" is the allocation unit size specified by
the card.

"preferred_erase_size" is in bytes.

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
Cc: Kyungmin Park <kmpark@infradead.org>
Cc: Madhusudhan Chikkature <madhu.cr@ti.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ben Gardiner <bengardiner@nanometrics.ca>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 files changed:
Documentation/00-INDEX
Documentation/mmc/00-INDEX [new file with mode: 0644]
Documentation/mmc/mmc-dev-attrs.txt [new file with mode: 0644]
drivers/mmc/core/core.c
drivers/mmc/core/core.h
drivers/mmc/core/mmc.c
drivers/mmc/core/sd.c
drivers/mmc/core/sd_ops.c
drivers/mmc/core/sd_ops.h
include/linux/mmc/card.h
include/linux/mmc/core.h
include/linux/mmc/host.h
include/linux/mmc/mmc.h
include/linux/mmc/sd.h