X-Git-Url: https://git.openpandora.org/cgi-bin/gitweb.cgi?p=pandora-kernel.git;a=blobdiff_plain;f=drivers%2Ftty%2Fserial%2F8250.c;h=07cfec56db005a73bffe081ec81c67cd9dd0e56f;hp=eeadf1b8e093202234b30c688490da2de10a3c04;hb=8fb7e4488e20229828e54187b6aa3ed5cd7cb315;hpb=45ff6fa1adf81f72e4815f0a993a644467b7b185

diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250.c
index eeadf1b8e093..07cfec56db00 100644
--- a/drivers/tty/serial/8250.c
+++ b/drivers/tty/serial/8250.c
@@ -316,6 +316,33 @@ static const struct serial8250_config uart_config[] = {
 		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
 		.flags		= UART_CAP_FIFO | UART_CAP_AFE | UART_CAP_EFR,
 	},
+	[PORT_BRCM_TRUMANAGE] = {
+		.name		= "TruManage",
+		.fifo_size	= 1,
+		.tx_loadsz	= 1024,
+		.flags		= UART_CAP_HFIFO,
+	},
+	[PORT_ALTR_16550_F32] = {
+		.name		= "Altera 16550 FIFO32",
+		.fifo_size	= 32,
+		.tx_loadsz	= 32,
+		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+		.flags		= UART_CAP_FIFO | UART_CAP_AFE,
+	},
+	[PORT_ALTR_16550_F64] = {
+		.name		= "Altera 16550 FIFO64",
+		.fifo_size	= 64,
+		.tx_loadsz	= 64,
+		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+		.flags		= UART_CAP_FIFO | UART_CAP_AFE,
+	},
+	[PORT_ALTR_16550_F128] = {
+		.name		= "Altera 16550 FIFO128",
+		.fifo_size	= 128,
+		.tx_loadsz	= 128,
+		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+		.flags		= UART_CAP_FIFO | UART_CAP_AFE,
+	},
 };
 
 #if defined(CONFIG_MIPS_ALCHEMY)
@@ -750,22 +777,16 @@ static int size_fifo(struct uart_8250_port *up)
  */
 static unsigned int autoconfig_read_divisor_id(struct uart_8250_port *p)
 {
-	unsigned char old_dll, old_dlm, old_lcr;
-	unsigned int id;
+	unsigned char old_lcr;
+	unsigned int id, old_dl;
 
 	old_lcr = serial_inp(p, UART_LCR);
 	serial_outp(p, UART_LCR, UART_LCR_CONF_MODE_A);
+	old_dl = serial_dl_read(p);
+	serial_dl_write(p, 0);
+	id = serial_dl_read(p);
+	serial_dl_write(p, old_dl);
 
-	old_dll = serial_inp(p, UART_DLL);
-	old_dlm = serial_inp(p, UART_DLM);
-
-	serial_outp(p, UART_DLL, 0);
-	serial_outp(p, UART_DLM, 0);
-
-	id = serial_inp(p, UART_DLL) | serial_inp(p, UART_DLM) << 8;
-
-	serial_outp(p, UART_DLL, old_dll);
-	serial_outp(p, UART_DLM, old_dlm);
 	serial_outp(p, UART_LCR, old_lcr);
 
 	return id;
@@ -1511,6 +1532,11 @@ static void transmit_chars(struct uart_8250_port *up)
 		up->port.icount.tx++;
 		if (uart_circ_empty(xmit))
 			break;
+		if (up->capabilities & UART_CAP_HFIFO) {
+			if ((serial_in(up, UART_LSR) & BOTH_EMPTY) !=
+			    BOTH_EMPTY)
+				break;
+		}
 	} while (--count > 0);
 
 	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
@@ -2327,10 +2353,11 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
 		quot++;
 
 	if (up->capabilities & UART_CAP_FIFO && up->port.fifosize > 1) {
-		if (baud < 2400)
-			fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_1;
-		else
-			fcr = uart_config[up->port.type].fcr;
+		fcr = uart_config[up->port.type].fcr;
+		if (baud < 2400) {
+			fcr &= ~UART_FCR_TRIGGER_MASK;
+			fcr |= UART_FCR_TRIGGER_1;
+		}
 	}
 
 	/*
@@ -2668,6 +2695,10 @@ static void serial8250_config_port(struct uart_port *port, int flags)
 	if (up->port.type == PORT_16550A && up->port.iotype == UPIO_AU)
 		up->bugs |= UART_BUG_NOMSR;
 
+	/* HW bugs may trigger IRQ while IIR == NO_INT */
+	if (up->port.type == PORT_TEGRA)
+		up->bugs |= UART_BUG_NOMSR;
+
 	if (up->port.type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ)
 		autoconfig_irq(up);
 
@@ -2683,7 +2714,7 @@ serial8250_verify_port(struct uart_port *port, struct serial_struct *ser)
 	if (ser->irq >= nr_irqs || ser->irq < 0 ||
 	    ser->baud_base < 9600 || ser->type < PORT_UNKNOWN ||
 	    ser->type >= ARRAY_SIZE(uart_config) || ser->type == PORT_CIRRUS ||
-	    ser->type == PORT_STARTECH)
+	    ser->type == PORT_STARTECH || uart_config[ser->type].name == NULL)
 		return -EINVAL;
 	return 0;
 }
@@ -2693,7 +2724,7 @@ serial8250_type(struct uart_port *port)
 {
 	int type = port->type;
 
-	if (type >= ARRAY_SIZE(uart_config))
+	if (type >= ARRAY_SIZE(uart_config) || uart_config[type].name == NULL)
 		type = 0;
 	return uart_config[type].name;
 }