X-Git-Url: https://git.openpandora.org/cgi-bin/gitweb.cgi?p=pandora-kernel.git;a=blobdiff_plain;f=drivers%2Fserial%2Fmux.c;h=953a5ffa9b44e6279b80f26a4a4aefb59ab934e3;hp=ccb8fa1800a58e0b8a9f1fdf1b32b40d1e225831;hb=eb4225b2da2b9f3c1ee43efe58ed1415cc1d4c47;hpb=e9ccb79927225d8cd8d022a7c09bfb2fad935b89 diff --git a/drivers/serial/mux.c b/drivers/serial/mux.c index ccb8fa1800a5..953a5ffa9b44 100644 --- a/drivers/serial/mux.c +++ b/drivers/serial/mux.c @@ -51,7 +51,11 @@ #define MUX_NR 256 static unsigned int port_cnt __read_mostly; -static struct uart_port mux_ports[MUX_NR]; +struct mux_port { + struct uart_port port; + int enabled; +}; +static struct mux_port mux_ports[MUX_NR]; static struct uart_driver mux_driver = { .owner = THIS_MODULE, @@ -66,7 +70,36 @@ static struct timer_list mux_timer; #define UART_PUT_CHAR(p, c) __raw_writel((c), (p)->membase + IO_DATA_REG_OFFSET) #define UART_GET_FIFO_CNT(p) __raw_readl((p)->membase + IO_DCOUNT_REG_OFFSET) -#define GET_MUX_PORTS(iodc_data) ((((iodc_data)[4] & 0xf0) >> 4) * 8) + 8 + +/** + * get_mux_port_count - Get the number of available ports on the Mux. + * @dev: The parisc device. + * + * This function is used to determine the number of ports the Mux + * supports. The IODC data reports the number of ports the Mux + * can support, but there are cases where not all the Mux ports + * are connected. This function can override the IODC and + * return the true port count. + */ +static int __init get_mux_port_count(struct parisc_device *dev) +{ + int status; + u8 iodc_data[32]; + unsigned long bytecnt; + + /* If this is the built-in Mux for the K-Class (Eole CAP/MUX), + * we only need to allocate resources for 1 port since the + * other 7 ports are not connected. + */ + if(dev->id.hversion == 0x15) + return 1; + + status = pdc_iodc_read(&bytecnt, dev->hpa.start, 0, iodc_data, 32); + BUG_ON(status != PDC_OK); + + /* Return the number of ports specified in the iodc data. */ + return ((((iodc_data)[4] & 0xf0) >> 4) * 8) + 8; +} /** * mux_tx_empty - Check if the transmitter fifo is empty. @@ -210,7 +243,7 @@ static void mux_write(struct uart_port *port) static void mux_read(struct uart_port *port) { int data; - struct tty_struct *tty = port->info->tty; + struct tty_struct *tty = port->info->port.tty; __u32 start_count = port->icount.rx; while(1) { @@ -250,7 +283,7 @@ static void mux_read(struct uart_port *port) */ static int mux_startup(struct uart_port *port) { - mod_timer(&mux_timer, jiffies + MUX_POLL_DELAY); + mux_ports[port->line].enabled = 1; return 0; } @@ -262,6 +295,7 @@ static int mux_startup(struct uart_port *port) */ static void mux_shutdown(struct uart_port *port) { + mux_ports[port->line].enabled = 0; } /** @@ -319,7 +353,7 @@ static int mux_request_port(struct uart_port *port) * @port: Ptr to the uart_port. * @type: Bitmask of required configurations. * - * Perform any autoconfiguration steps for the port. This functino is + * Perform any autoconfiguration steps for the port. This function is * called if the UPF_BOOT_AUTOCONF flag is specified for the port. * [Note: This is required for now because of a bug in the Serial core. * rmk has already submitted a patch to linus, should be available for @@ -357,11 +391,11 @@ static void mux_poll(unsigned long unused) int i; for(i = 0; i < port_cnt; ++i) { - if(!mux_ports[i].info) + if(!mux_ports[i].enabled) continue; - mux_read(&mux_ports[i]); - mux_write(&mux_ports[i]); + mux_read(&mux_ports[i].port); + mux_write(&mux_ports[i].port); } mod_timer(&mux_timer, jiffies + MUX_POLL_DELAY); @@ -371,8 +405,17 @@ static void mux_poll(unsigned long unused) #ifdef CONFIG_SERIAL_MUX_CONSOLE static void mux_console_write(struct console *co, const char *s, unsigned count) { - while(count--) - pdc_iodc_putc(*s++); + /* Wait until the FIFO drains. */ + while(UART_GET_FIFO_CNT(&mux_ports[0].port)) + udelay(1); + + while(count--) { + if(*s == '\n') { + UART_PUT_CHAR(&mux_ports[0].port, '\r'); + } + UART_PUT_CHAR(&mux_ports[0].port, *s++); + } + } static int mux_console_setup(struct console *co, char *options) @@ -428,19 +471,14 @@ static struct uart_ops mux_pops = { */ static int __init mux_probe(struct parisc_device *dev) { - int i, status, ports; - u8 iodc_data[32]; - unsigned long bytecnt; - struct uart_port *port; + int i, status; - status = pdc_iodc_read(&bytecnt, dev->hpa.start, 0, iodc_data, 32); - if(status != PDC_OK) { - printk(KERN_ERR "Serial mux: Unable to read IODC.\n"); - return 1; - } + int port_count = get_mux_port_count(dev); + printk(KERN_INFO "Serial mux driver (%d ports) Revision: 0.6\n", port_count); - ports = GET_MUX_PORTS(iodc_data); - printk(KERN_INFO "Serial mux driver (%d ports) Revision: 0.3\n", ports); + dev_set_drvdata(&dev->dev, (void *)(long)port_count); + request_mem_region(dev->hpa.start + MUX_OFFSET, + port_count * MUX_LINE_OFFSET, "Mux"); if(!port_cnt) { mux_driver.cons = MUX_CONSOLE; @@ -450,13 +488,10 @@ static int __init mux_probe(struct parisc_device *dev) printk(KERN_ERR "Serial mux: Unable to register driver.\n"); return 1; } - - init_timer(&mux_timer); - mux_timer.function = mux_poll; } - for(i = 0; i < ports; ++i, ++port_cnt) { - port = &mux_ports[port_cnt]; + for(i = 0; i < port_count; ++i, ++port_cnt) { + struct uart_port *port = &mux_ports[port_cnt].port; port->iobase = 0; port->mapbase = dev->hpa.start + MUX_OFFSET + (i * MUX_LINE_OFFSET); @@ -477,37 +512,97 @@ static int __init mux_probe(struct parisc_device *dev) */ port->timeout = HZ / 50; spin_lock_init(&port->lock); + status = uart_add_one_port(&mux_driver, port); BUG_ON(status); } -#ifdef CONFIG_SERIAL_MUX_CONSOLE - register_console(&mux_console); -#endif return 0; } +static int __devexit mux_remove(struct parisc_device *dev) +{ + int i, j; + int port_count = (long)dev_get_drvdata(&dev->dev); + + /* Find Port 0 for this card in the mux_ports list. */ + for(i = 0; i < port_cnt; ++i) { + if(mux_ports[i].port.mapbase == dev->hpa.start + MUX_OFFSET) + break; + } + BUG_ON(i + port_count > port_cnt); + + /* Release the resources associated with each port on the device. */ + for(j = 0; j < port_count; ++j, ++i) { + struct uart_port *port = &mux_ports[i].port; + + uart_remove_one_port(&mux_driver, port); + if(port->membase) + iounmap(port->membase); + } + + release_mem_region(dev->hpa.start + MUX_OFFSET, port_count * MUX_LINE_OFFSET); + return 0; +} + +/* Hack. This idea was taken from the 8250_gsc.c on how to properly order + * the serial port detection in the proper order. The idea is we always + * want the builtin mux to be detected before addin mux cards, so we + * specifically probe for the builtin mux cards first. + * + * This table only contains the parisc_device_id of known builtin mux + * devices. All other mux cards will be detected by the generic mux_tbl. + */ +static struct parisc_device_id builtin_mux_tbl[] = { + { HPHW_A_DIRECT, HVERSION_REV_ANY_ID, 0x15, 0x0000D }, /* All K-class */ + { HPHW_A_DIRECT, HVERSION_REV_ANY_ID, 0x44, 0x0000D }, /* E35, E45, and E55 */ + { 0, } +}; + static struct parisc_device_id mux_tbl[] = { { HPHW_A_DIRECT, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x0000D }, { 0, } }; +MODULE_DEVICE_TABLE(parisc, builtin_mux_tbl); MODULE_DEVICE_TABLE(parisc, mux_tbl); +static struct parisc_driver builtin_serial_mux_driver = { + .name = "builtin_serial_mux", + .id_table = builtin_mux_tbl, + .probe = mux_probe, + .remove = __devexit_p(mux_remove), +}; + static struct parisc_driver serial_mux_driver = { .name = "serial_mux", .id_table = mux_tbl, .probe = mux_probe, + .remove = __devexit_p(mux_remove), }; /** - * mux_init - Serial MUX initalization procedure. + * mux_init - Serial MUX initialization procedure. * * Register the Serial MUX driver. */ static int __init mux_init(void) { - return register_parisc_driver(&serial_mux_driver); + register_parisc_driver(&builtin_serial_mux_driver); + register_parisc_driver(&serial_mux_driver); + + if(port_cnt > 0) { + /* Start the Mux timer */ + init_timer(&mux_timer); + mux_timer.function = mux_poll; + mod_timer(&mux_timer, jiffies + MUX_POLL_DELAY); + +#ifdef CONFIG_SERIAL_MUX_CONSOLE + register_console(&mux_console); +#endif + } + + return 0; } /** @@ -517,14 +612,16 @@ static int __init mux_init(void) */ static void __exit mux_exit(void) { - int i; - - for (i = 0; i < port_cnt; i++) { - uart_remove_one_port(&mux_driver, &mux_ports[i]); - if (mux_ports[i].membase) - iounmap(mux_ports[i].membase); + /* Delete the Mux timer. */ + if(port_cnt > 0) { + del_timer(&mux_timer); +#ifdef CONFIG_SERIAL_MUX_CONSOLE + unregister_console(&mux_console); +#endif } + unregister_parisc_driver(&builtin_serial_mux_driver); + unregister_parisc_driver(&serial_mux_driver); uart_unregister_driver(&mux_driver); }