X-Git-Url: https://git.openpandora.org/cgi-bin/gitweb.cgi?p=pandora-kernel.git;a=blobdiff_plain;f=drivers%2Fscsi%2FKconfig;h=44728ae3fe7731cebeee4d6314f5385ca4d0b5e2;hp=4c42065dea88bbc2623264ada6ff5d0329406c61;hb=f0cd91a68acdc9b49d7f6738b514a426da627649;hpb=0a75c23a009ff65f651532cecc16675d05f4de37 diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 4c42065dea88..44728ae3fe77 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -379,6 +379,14 @@ config SCSI_AHA1740 config SCSI_AACRAID tristate "Adaptec AACRAID support" depends on SCSI && PCI + help + This driver supports a variety of Dell, HP, Adaptec, IBM and + ICP storage products. For a list of supported products, refer + to . + + To compile this driver as a module, choose M here: the module + will be called aacraid. + source "drivers/scsi/aic7xxx/Kconfig.aic7xxx" @@ -438,7 +446,9 @@ config SCSI_DPT_I2O config SCSI_ADVANSYS tristate "AdvanSys SCSI support" - depends on (ISA || EISA || PCI) && SCSI && BROKEN + depends on SCSI + depends on ISA || EISA || PCI + depends on BROKEN || X86_32 help This is a driver for all SCSI host adapters manufactured by AdvanSys. It is documented in the kernel source in @@ -522,6 +532,16 @@ config SCSI_PDC_ADMA If unsure, say N. +config SCSI_HPTIOP + tristate "HighPoint RocketRAID 3xxx Controller support" + depends on SCSI && PCI + help + This option enables support for HighPoint RocketRAID 3xxx + controllers. + + To compile this driver as a module, choose M here; the module + will be called hptiop. If unsure, say N. + config SCSI_SATA_QSTOR tristate "Pacific Digital SATA QStor support" depends on SCSI_SATA && PCI @@ -587,10 +607,10 @@ config SCSI_SATA_VIA If unsure, say N. config SCSI_SATA_VITESSE - tristate "VITESSE VSC-7174 SATA support" + tristate "VITESSE VSC-7174 / INTEL 31244 SATA support" depends on SCSI_SATA && PCI help - This option enables support for Vitesse VSC7174 Serial ATA. + This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA. If unsure, say N. @@ -914,7 +934,7 @@ config SCSI_INIA100 config SCSI_PPA tristate "IOMEGA parallel port (ppa - older drives)" - depends on SCSI && PARPORT + depends on SCSI && PARPORT_PC ---help--- This driver supports older versions of IOMEGA's parallel port ZIP drive (a 100 MB removable media device). @@ -941,7 +961,7 @@ config SCSI_PPA config SCSI_IMM tristate "IOMEGA parallel port (imm - newer drives)" - depends on SCSI && PARPORT + depends on SCSI && PARPORT_PC ---help--- This driver supports newer versions of IOMEGA's parallel port ZIP drive (a 100 MB removable media device). @@ -968,7 +988,7 @@ config SCSI_IMM config SCSI_IZIP_EPP16 bool "ppa/imm option - Use slow (but safe) EPP-16" - depends on PARPORT && (SCSI_PPA || SCSI_IMM) + depends on SCSI_PPA || SCSI_IMM ---help--- EPP (Enhanced Parallel Port) is a standard for parallel ports which allows them to act as expansion buses that can handle up to 64 @@ -983,7 +1003,7 @@ config SCSI_IZIP_EPP16 config SCSI_IZIP_SLOW_CTR bool "ppa/imm option - Assume slow parport control register" - depends on PARPORT && (SCSI_PPA || SCSI_IMM) + depends on SCSI_PPA || SCSI_IMM help Some parallel ports are known to have excessive delays between changing the parallel port control register and good data being @@ -1071,7 +1091,7 @@ config SCSI_SYM53C8XX_DMA_ADDRESSING_MODE memory using PCI DAC cycles. config SCSI_SYM53C8XX_DEFAULT_TAGS - int "default tagged command queue depth" + int "Default tagged command queue depth" depends on SCSI_SYM53C8XX_2 default "16" help @@ -1082,7 +1102,7 @@ config SCSI_SYM53C8XX_DEFAULT_TAGS exceed CONFIG_SCSI_SYM53C8XX_MAX_TAGS. config SCSI_SYM53C8XX_MAX_TAGS - int "maximum number of queued commands" + int "Maximum number of queued commands" depends on SCSI_SYM53C8XX_2 default "64" help @@ -1091,13 +1111,14 @@ config SCSI_SYM53C8XX_MAX_TAGS possible. The driver supports up to 256 queued commands per device. This value is used as a compiled-in hard limit. -config SCSI_SYM53C8XX_IOMAPPED - bool "use port IO" +config SCSI_SYM53C8XX_MMIO + bool "Use memory mapped IO" depends on SCSI_SYM53C8XX_2 + default y help - If you say Y here, the driver will use port IO to access - the card. This is significantly slower then using memory - mapped IO. Most people should answer N. + Memory mapped IO is faster than Port IO. Most people should + answer Y here, but some machines may have problems. If you have + to answer N here, please report the problem to the maintainer. config SCSI_IPR tristate "IBM Power Linux RAID adapter support" @@ -1301,15 +1322,6 @@ config SCSI_QLOGIC_FAS To compile this driver as a module, choose M here: the module will be called qlogicfas. -config SCSI_QLOGIC_FC - tristate "Qlogic ISP FC SCSI support" - depends on PCI && SCSI - help - This is a driver for the QLogic ISP2100 SCSI-FCP host adapter. - - To compile this driver as a module, choose M here: the - module will be called qlogicfc. - config SCSI_QLOGIC_FC_FIRMWARE bool "Include loadable firmware in driver" depends on SCSI_QLOGIC_FC @@ -1815,7 +1827,7 @@ config SCSI_SUNESP config ZFCP tristate "FCP host bus adapter driver for IBM eServer zSeries" - depends on ARCH_S390 && QDIO && SCSI + depends on S390 && QDIO && SCSI select SCSI_FC_ATTRS help If you want to access SCSI devices attached to your IBM eServer