X-Git-Url: https://git.openpandora.org/cgi-bin/gitweb.cgi?p=pandora-kernel.git;a=blobdiff_plain;f=drivers%2Fof%2Fof_pci.c;h=3701b62c1d5eeb5197351125f95cf7511a072ab1;hp=ac1ec54e4fd50eea60d123004fe735636518722c;hb=a642285014df03b8f320399d515bf3b779af07ac;hpb=ec616048ea21da2b32ed1a820e637c74c61c618c

diff --git a/drivers/of/of_pci.c b/drivers/of/of_pci.c
index ac1ec54e4fd5..3701b62c1d5e 100644
--- a/drivers/of/of_pci.c
+++ b/drivers/of/of_pci.c
@@ -1,92 +1,41 @@
 #include <linux/kernel.h>
+#include <linux/of.h>
 #include <linux/of_pci.h>
-#include <linux/of_irq.h>
 #include <asm/prom.h>
 
-/**
- * of_irq_map_pci - Resolve the interrupt for a PCI device
- * @pdev:       the device whose interrupt is to be resolved
- * @out_irq:    structure of_irq filled by this function
- *
- * This function resolves the PCI interrupt for a given PCI device. If a
- * device-node exists for a given pci_dev, it will use normal OF tree
- * walking. If not, it will implement standard swizzling and walk up the
- * PCI tree until an device-node is found, at which point it will finish
- * resolving using the OF tree walking.
- */
-int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq)
+static inline int __of_pci_pci_compare(struct device_node *node,
+				       unsigned int devfn)
 {
-	struct device_node *dn, *ppnode;
-	struct pci_dev *ppdev;
-	u32 lspec;
-	__be32 lspec_be;
-	__be32 laddr[3];
-	u8 pin;
-	int rc;
+	unsigned int size;
+	const __be32 *reg = of_get_property(node, "reg", &size);
 
-	/* Check if we have a device node, if yes, fallback to standard
-	 * device tree parsing
-	 */
-	dn = pci_device_to_OF_node(pdev);
-	if (dn) {
-		rc = of_irq_map_one(dn, 0, out_irq);
-		if (!rc)
-			return rc;
-	}
-
-	/* Ok, we don't, time to have fun. Let's start by building up an
-	 * interrupt spec.  we assume #interrupt-cells is 1, which is standard
-	 * for PCI. If you do different, then don't use that routine.
-	 */
-	rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin);
-	if (rc != 0)
-		return rc;
-	/* No pin, exit */
-	if (pin == 0)
-		return -ENODEV;
-
-	/* Now we walk up the PCI tree */
-	lspec = pin;
-	for (;;) {
-		/* Get the pci_dev of our parent */
-		ppdev = pdev->bus->self;
-
-		/* Ouch, it's a host bridge... */
-		if (ppdev == NULL) {
-			ppnode = pci_bus_to_OF_node(pdev->bus);
-
-			/* No node for host bridge ? give up */
-			if (ppnode == NULL)
-				return -EINVAL;
-		} else {
-			/* We found a P2P bridge, check if it has a node */
-			ppnode = pci_device_to_OF_node(ppdev);
-		}
-
-		/* Ok, we have found a parent with a device-node, hand over to
-		 * the OF parsing code.
-		 * We build a unit address from the linux device to be used for
-		 * resolution. Note that we use the linux bus number which may
-		 * not match your firmware bus numbering.
-		 * Fortunately, in most cases, interrupt-map-mask doesn't
-		 * include the bus number as part of the matching.
-		 * You should still be careful about that though if you intend
-		 * to rely on this function (you ship  a firmware that doesn't
-		 * create device nodes for all PCI devices).
-		 */
-		if (ppnode)
-			break;
+	if (!reg || size < 5 * sizeof(__be32))
+		return 0;
+	return ((be32_to_cpup(&reg[0]) >> 8) & 0xff) == devfn;
+}
 
-		/* We can only get here if we hit a P2P bridge with no node,
-		 * let's do standard swizzling and try again
+struct device_node *of_pci_find_child_device(struct device_node *parent,
+					     unsigned int devfn)
+{
+	struct device_node *node, *node2;
+
+	for_each_child_of_node(parent, node) {
+		if (__of_pci_pci_compare(node, devfn))
+			return node;
+		/*
+		 * Some OFs create a parent node "multifunc-device" as
+		 * a fake root for all functions of a multi-function
+		 * device we go down them as well.
 		 */
-		lspec = pci_swizzle_interrupt_pin(pdev, lspec);
-		pdev = ppdev;
+		if (!strcmp(node->name, "multifunc-device")) {
+			for_each_child_of_node(node, node2) {
+				if (__of_pci_pci_compare(node2, devfn)) {
+					of_node_put(node);
+					return node2;
+				}
+			}
+		}
 	}
-
-	lspec_be = cpu_to_be32(lspec);
-	laddr[0] = cpu_to_be32((pdev->bus->number << 16) | (pdev->devfn << 8));
-	laddr[1]  = laddr[2] = cpu_to_be32(0);
-	return of_irq_map_raw(ppnode, &lspec_be, 1, laddr, out_irq);
+	return NULL;
 }
-EXPORT_SYMBOL_GPL(of_irq_map_pci);
+EXPORT_SYMBOL_GPL(of_pci_find_child_device);