X-Git-Url: https://git.openpandora.org/cgi-bin/gitweb.cgi?p=pandora-kernel.git;a=blobdiff_plain;f=drivers%2Fnet%2Fwireless%2Fath%2Fath5k%2Fphy.c;h=78c26fdccad1389c8d8a6ef88459c934e7776c00;hp=df5cd0fd69d650bda0849c8650e86e5ae417d2fc;hb=a8851d10aadb46b25db4459aa0d1150c957d2bc1;hpb=17f490bcedd7b6677140b2d49efe9e9e6b84de60 diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c index df5cd0fd69d6..78c26fdccad1 100644 --- a/drivers/net/wireless/ath/ath5k/phy.c +++ b/drivers/net/wireless/ath/ath5k/phy.c @@ -609,10 +609,10 @@ done: /* Write initial RF gain table to set the RF sensitivity * this one works on all RF chips and has nothing to do * with gain_F calibration */ -static int ath5k_hw_rfgain_init(struct ath5k_hw *ah, unsigned int freq) +static int ath5k_hw_rfgain_init(struct ath5k_hw *ah, enum ieee80211_band band) { const struct ath5k_ini_rfgain *ath5k_rfg; - unsigned int i, size; + unsigned int i, size, index; switch (ah->ah_radio) { case AR5K_RF5111: @@ -644,17 +644,11 @@ static int ath5k_hw_rfgain_init(struct ath5k_hw *ah, unsigned int freq) return -EINVAL; } - switch (freq) { - case AR5K_INI_RFGAIN_2GHZ: - case AR5K_INI_RFGAIN_5GHZ: - break; - default: - return -EINVAL; - } + index = (band == IEEE80211_BAND_2GHZ) ? 1 : 0; for (i = 0; i < size; i++) { AR5K_REG_WAIT(i); - ath5k_hw_reg_write(ah, ath5k_rfg[i].rfg_value[freq], + ath5k_hw_reg_write(ah, ath5k_rfg[i].rfg_value[index], (u32)ath5k_rfg[i].rfg_register); } @@ -1361,20 +1355,7 @@ void ath5k_hw_update_noise_floor(struct ath5k_hw *ah) return; } - switch (ah->ah_current_channel->hw_value & CHANNEL_MODES) { - case CHANNEL_A: - case CHANNEL_XR: - ee_mode = AR5K_EEPROM_MODE_11A; - break; - case CHANNEL_G: - ee_mode = AR5K_EEPROM_MODE_11G; - break; - default: - case CHANNEL_B: - ee_mode = AR5K_EEPROM_MODE_11B; - break; - } - + ee_mode = ath5k_eeprom_mode_from_channel(ah->ah_current_channel); /* completed NF calibration, test threshold */ nf = ath5k_hw_read_measured_noise_floor(ah); @@ -1935,7 +1916,8 @@ ath5k_hw_set_antenna_mode(struct ath5k_hw *ah, u8 ant_mode) struct ieee80211_channel *channel = ah->ah_current_channel; bool use_def_for_tx, update_def_on_tx, use_def_for_rts, fast_div; bool use_def_for_sg; - u8 def_ant, tx_ant, ee_mode; + int ee_mode; + u8 def_ant, tx_ant; u32 sta_id1 = 0; /* if channel is not initialized yet we can't set the antennas @@ -1947,18 +1929,8 @@ ath5k_hw_set_antenna_mode(struct ath5k_hw *ah, u8 ant_mode) def_ant = ah->ah_def_ant; - switch (channel->hw_value & CHANNEL_MODES) { - case CHANNEL_A: - case CHANNEL_XR: - ee_mode = AR5K_EEPROM_MODE_11A; - break; - case CHANNEL_G: - ee_mode = AR5K_EEPROM_MODE_11G; - break; - case CHANNEL_B: - ee_mode = AR5K_EEPROM_MODE_11B; - break; - default: + ee_mode = ath5k_eeprom_mode_from_channel(channel); + if (ee_mode < 0) { ATH5K_ERR(ah->ah_sc, "invalid channel: %d\n", channel->center_freq); return; @@ -2593,7 +2565,7 @@ ath5k_combine_linear_pcdac_curves(struct ath5k_hw *ah, s16* table_min, /* Write PCDAC values on hw */ static void -ath5k_setup_pcdac_table(struct ath5k_hw *ah) +ath5k_write_pcdac_table(struct ath5k_hw *ah) { u8 *pcdac_out = ah->ah_txpower.txp_pd_table; int i; @@ -2742,10 +2714,12 @@ ath5k_combine_pwr_to_pdadc_curves(struct ath5k_hw *ah, /* Write PDADC values on hw */ static void -ath5k_setup_pwr_to_pdadc_table(struct ath5k_hw *ah, - u8 pdcurves, u8 *pdg_to_idx) +ath5k_write_pwr_to_pdadc_table(struct ath5k_hw *ah, u8 ee_mode) { + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; u8 *pdadc_out = ah->ah_txpower.txp_pd_table; + u8 *pdg_to_idx = ee->ee_pdc_to_idx[ee_mode]; + u8 pdcurves = ee->ee_pd_gains[ee_mode]; u32 reg; u8 i; @@ -2955,8 +2929,7 @@ ath5k_setup_channel_powertable(struct ath5k_hw *ah, (s16) pcinfo_R->freq, pcinfo_L->max_pwr, pcinfo_R->max_pwr); - /* We are ready to go, fill PCDAC/PDADC - * table and write settings on hardware */ + /* Fill PCDAC/PDADC table */ switch (type) { case AR5K_PWRTABLE_LINEAR_PCDAC: /* For RF5112 we can have one or two curves @@ -2969,9 +2942,6 @@ ath5k_setup_channel_powertable(struct ath5k_hw *ah, * match max power value with max * table index */ ah->ah_txpower.txp_offset = 64 - (table_max[0] / 2); - - /* Write settings on hw */ - ath5k_setup_pcdac_table(ah); break; case AR5K_PWRTABLE_PWR_TO_PCDAC: /* We are done for RF5111 since it has only @@ -2981,9 +2951,6 @@ ath5k_setup_channel_powertable(struct ath5k_hw *ah, /* No rate powertable adjustment for RF5111 */ ah->ah_txpower.txp_min_idx = 0; ah->ah_txpower.txp_offset = 0; - - /* Write settings on hw */ - ath5k_setup_pcdac_table(ah); break; case AR5K_PWRTABLE_PWR_TO_PDADC: /* Set PDADC boundaries and fill @@ -2991,9 +2958,6 @@ ath5k_setup_channel_powertable(struct ath5k_hw *ah, ath5k_combine_pwr_to_pdadc_curves(ah, table_min, table_max, ee->ee_pd_gains[ee_mode]); - /* Write settings on hw */ - ath5k_setup_pwr_to_pdadc_table(ah, pdg, pdg_curve_to_idx); - /* Set txp.offset, note that table_min * can be negative */ ah->ah_txpower.txp_offset = table_min[0]; @@ -3002,9 +2966,20 @@ ath5k_setup_channel_powertable(struct ath5k_hw *ah, return -EINVAL; } + ah->ah_txpower.txp_setup = true; + return 0; } +/* Write power table for current channel to hw */ +static void +ath5k_write_channel_powertable(struct ath5k_hw *ah, u8 ee_mode, u8 type) +{ + if (type == AR5K_PWRTABLE_PWR_TO_PDADC) + ath5k_write_pwr_to_pdadc_table(ah, ee_mode); + else + ath5k_write_pcdac_table(ah); +} /* * Per-rate tx power setting @@ -3093,7 +3068,7 @@ ath5k_setup_rate_powertable(struct ath5k_hw *ah, u16 max_pwr, /* Min/max in 0.25dB units */ ah->ah_txpower.txp_min_pwr = 2 * rates[7]; - ah->ah_txpower.txp_max_pwr = 2 * rates[0]; + ah->ah_txpower.txp_cur_pwr = 2 * rates[0]; ah->ah_txpower.txp_ofdm = rates[7]; } @@ -3103,9 +3078,11 @@ ath5k_setup_rate_powertable(struct ath5k_hw *ah, u16 max_pwr, */ static int ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, - u8 ee_mode, u8 txpower, bool fast) + u8 txpower) { struct ath5k_rate_pcal_info rate_info; + struct ieee80211_channel *curr_channel = ah->ah_current_channel; + int ee_mode; u8 type; int ret; @@ -3114,11 +3091,12 @@ ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, return -EINVAL; } - /* Reset TX power values */ - memset(&ah->ah_txpower, 0, sizeof(ah->ah_txpower)); - ah->ah_txpower.txp_tpc = AR5K_TUNE_TPC_TXPOWER; - ah->ah_txpower.txp_min_pwr = 0; - ah->ah_txpower.txp_max_pwr = AR5K_TUNE_MAX_TXPOWER; + ee_mode = ath5k_eeprom_mode_from_channel(channel); + if (ee_mode < 0) { + ATH5K_ERR(ah->ah_sc, + "invalid channel: %d\n", channel->center_freq); + return -EINVAL; + } /* Initialize TX power table */ switch (ah->ah_radio) { @@ -3142,16 +3120,27 @@ ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, return -EINVAL; } - /* If fast is set it means we are on the same channel/mode - * so there is no need to recalculate the powertable, we 'll - * just use the cached one */ - if (!fast) { + /* + * If we don't change channel/mode skip tx powertable calculation + * and use the cached one. + */ + if (!ah->ah_txpower.txp_setup || + (channel->hw_value != curr_channel->hw_value) || + (channel->center_freq != curr_channel->center_freq)) { + /* Reset TX power values */ + memset(&ah->ah_txpower, 0, sizeof(ah->ah_txpower)); + ah->ah_txpower.txp_tpc = AR5K_TUNE_TPC_TXPOWER; + + /* Calculate the powertable */ ret = ath5k_setup_channel_powertable(ah, channel, ee_mode, type); - if (ret) - return ret; + if (ret) + return ret; } + /* Write table on hw */ + ath5k_write_channel_powertable(ah, ee_mode, type); + /* Limit max power if we have a CTL available */ ath5k_get_max_ctl_power(ah, channel); @@ -3205,31 +3194,10 @@ ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 txpower) { - /*Just a try M.F.*/ - struct ieee80211_channel *channel = ah->ah_current_channel; - u8 ee_mode; - - switch (channel->hw_value & CHANNEL_MODES) { - case CHANNEL_A: - case CHANNEL_XR: - ee_mode = AR5K_EEPROM_MODE_11A; - break; - case CHANNEL_G: - ee_mode = AR5K_EEPROM_MODE_11G; - break; - case CHANNEL_B: - ee_mode = AR5K_EEPROM_MODE_11B; - break; - default: - ATH5K_ERR(ah->ah_sc, - "invalid channel: %d\n", channel->center_freq); - return -EINVAL; - } - ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_TXPOWER, "changing txpower to %d\n", txpower); - return ath5k_hw_txpower(ah, channel, ee_mode, txpower, true); + return ath5k_hw_txpower(ah, ah->ah_current_channel, txpower); } /*************\ @@ -3237,12 +3205,11 @@ int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 txpower) \*************/ int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, - u8 mode, u8 ee_mode, u8 freq, bool fast) + u8 mode, bool fast) { struct ieee80211_channel *curr_channel; int ret, i; u32 phy_tst1; - bool fast_txp; ret = 0; /* @@ -3272,17 +3239,6 @@ int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, return -EIO; } - /* - * If we don't change channel/mode skip - * tx powertable calculation and use the - * cached one. - */ - if ((channel->hw_value == curr_channel->hw_value) && - (channel->center_freq == curr_channel->center_freq)) - fast_txp = true; - else - fast_txp = false; - /* * Set TX power * @@ -3290,9 +3246,8 @@ int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, * RF buffer settings on 5211/5212+ so that we * properly set curve indices. */ - ret = ath5k_hw_txpower(ah, channel, ee_mode, - ah->ah_txpower.txp_max_pwr / 2, - fast_txp); + ret = ath5k_hw_txpower(ah, channel, ah->ah_txpower.txp_cur_pwr ? + ah->ah_txpower.txp_cur_pwr / 2 : AR5K_TUNE_MAX_TXPOWER); if (ret) return ret; @@ -3308,7 +3263,7 @@ int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, * Write initial RF gain settings * This should work for both 5111/5112 */ - ret = ath5k_hw_rfgain_init(ah, freq); + ret = ath5k_hw_rfgain_init(ah, channel->band); if (ret) return ret;