X-Git-Url: https://git.openpandora.org/cgi-bin/gitweb.cgi?p=pandora-kernel.git;a=blobdiff_plain;f=drivers%2Fnet%2FKconfig;h=a584f0362e6c5751e6630bd9b10e5dfbc693df69;hp=79e8aa6f2b9edfc215e43b1a1b0a934274a680f4;hb=d7f6884ae0ae6e406ec3500fcde16e8f51642460;hpb=27a639a92d3289c4851105efcbc2f8b88969194f

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 79e8aa6f2b9e..a584f0362e6c 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -397,7 +397,7 @@ config SUN3LANCE
 	  If you're not building a kernel for a Sun 3, say N.
 
 config SUN3_82586
-	tristate "Sun3 on-board Intel 82586 support"
+	bool "Sun3 on-board Intel 82586 support"
 	depends on NET_ETHERNET && SUN3
 	help
 	  This driver enables support for the on-board Intel 82586 based
@@ -447,7 +447,7 @@ config NET_SB1250_MAC
 
 config SGI_IOC3_ETH
 	bool "SGI IOC3 Ethernet"
-	depends on NET_ETHERNET && PCI && SGI_IP27
+	depends on NET_ETHERNET && PCI && SGI_IP27 && BROKEN
 	select CRC32
 	select MII
 	help
@@ -1738,11 +1738,18 @@ config 68360_ENET
 	  the Motorola 68360 processor.
 
 config FEC
-	bool "FEC ethernet controller (of ColdFire 5272)"
-	depends on M5272 || M5282
+	bool "FEC ethernet controller (of ColdFire CPUs)"
+	depends on M523x || M527x || M5272 || M528x
 	help
 	  Say Y here if you want to use the built-in 10/100 Fast ethernet
-	  controller on the Motorola ColdFire 5272 processor.
+	  controller on some Motorola ColdFire processors.
+
+config FEC2
+	bool "Second FEC ethernet controller (on some ColdFire CPUs)"
+	depends on FEC
+	help
+	  Say Y here if you want to use the second built-in 10/100 Fast
+	  ethernet controller on some Motorola ColdFire processors.
 
 config NE_H8300
 	tristate "NE2000 compatible support for H8/300"
@@ -1923,6 +1930,20 @@ config R8169_VLAN
 	  
 	  If in doubt, say Y.
 
+config SIS190
+	tristate "SiS190/SiS191 gigabit ethernet support"
+	depends on PCI
+	select CRC32
+	select MII
+	---help---
+	  Say Y here if you have a SiS 190 PCI Fast Ethernet adapter or
+	  a SiS 191 PCI Gigabit Ethernet adapter. Both are expected to
+	  appear in lan on motherboard designs which are based on SiS 965
+	  and SiS 966 south bridge.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called sis190.  This is recommended.
+
 config SKGE
 	tristate "New SysKonnect GigaEthernet support (EXPERIMENTAL)"
 	depends on PCI && EXPERIMENTAL
@@ -1934,7 +1955,25 @@ config SKGE
 
 	  It does not support the link failover and network management 
 	  features that "portable" vendor supplied sk98lin driver does.
-	
+
+
+config SKY2
+	tristate "SysKonnect Yukon2 support (EXPERIMENTAL)"
+	depends on PCI && EXPERIMENTAL
+	select CRC32
+	---help---
+	  This driver support the Marvell Yukon 2 Gigabit Ethernet adapter.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called sky2.  This is recommended.
+
+config SKY2_EC_A1
+	bool "Support old Yukon-EC A1 chipset"
+	depends on SKY2
+	---help---
+	  Include support for early revisions of the Yukon EC chipset
+	  that required extra workarounds. If in doubt, say N.
+
 config SK98LIN
 	tristate "Marvell Yukon Chipset / SysKonnect SK-98xx Support"
 	depends on PCI
@@ -2044,6 +2083,13 @@ config BNX2
 	  To compile this driver as a module, choose M here: the module
 	  will be called bnx2.  This is recommended.
 
+config SPIDER_NET
+	tristate "Spider Gigabit Ethernet driver"
+	depends on PCI && PPC_BPA
+	help
+	  This driver supports the Gigabit Ethernet chips present on the
+	  Cell Processor-Based Blades from IBM.
+
 config GIANFAR
 	tristate "Gianfar Ethernet"
 	depends on 85xx || 83xx
@@ -2093,6 +2139,25 @@ endmenu
 menu "Ethernet (10000 Mbit)"
 	depends on !UML
 
+config CHELSIO_T1
+        tristate "Chelsio 10Gb Ethernet support"
+        depends on PCI
+        help
+          This driver supports Chelsio N110 and N210 models 10Gb Ethernet
+          cards. More information about adapter features and performance
+          tuning is in <file:Documentation/networking/cxgb.txt>.
+
+          For general information about Chelsio and our products, visit
+          our website at <http://www.chelsio.com>.
+
+          For customer support, please visit our customer support page at
+          <http://www.chelsio.com/support.htm>.
+
+          Please send feedback to <linux-bugs@chelsio.com>.
+
+          To compile this driver as a module, choose M here: the module
+          will be called cxgb.
+
 config IXGB
 	tristate "Intel(R) PRO/10GbE support"
 	depends on PCI