X-Git-Url: https://git.openpandora.org/cgi-bin/gitweb.cgi?p=pandora-kernel.git;a=blobdiff_plain;f=drivers%2Fnet%2FKconfig;h=47c72a63dfe11d67ab11dc3970096da8ce576218;hp=5c15f3e9ea0723e4ce472bf0b55edd3af3849109;hb=b43d4ddaec2b33fd6eaf0bed970c86ab08a52aaf;hpb=e7de369050534025b33aab1033358bf47a577e4d

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 5c15f3e9ea07..47c72a63dfe1 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -4,9 +4,10 @@
 #
 
 menu "Network device support"
+	depends on NET
 
 config NETDEVICES
-	depends on NET
+	default y if UML
 	bool "Network device support"
 	---help---
 	  You can say N here if you don't intend to connect your Linux box to
@@ -23,9 +24,6 @@ config NETDEVICES
 
 	  If unsure, say Y.
 
-# All the following symbols are dependent on NETDEVICES - do not repeat
-# that for each of the symbols.
-if NETDEVICES
 
 config IFB
 	tristate "Intermediate Functional Block support"
@@ -1387,7 +1385,7 @@ config FORCEDETH
 
 config CS89x0
 	tristate "CS89x0 support"
-	depends on NET_PCI && (ISA || ARCH_IXDP2X01 || ARCH_PNX010X)
+	depends on NET_PCI && (ISA || MACH_IXDP2351 || ARCH_IXDP2X01 || ARCH_PNX010X)
 	---help---
 	  Support for CS89x0 chipset based Ethernet cards. If you have a
 	  network (Ethernet) card of this type, say Y and read the
@@ -1914,6 +1912,15 @@ config E1000_NAPI
 
 	  If in doubt, say N.
 
+config E1000_DISABLE_PACKET_SPLIT
+	bool "Disable Packet Split for PCI express adapters"
+	depends on E1000
+	help
+	  Say Y here if you want to use the legacy receive path for PCI express
+	  hadware.
+
+	  If in doubt, say N.
+
 source "drivers/net/ixp2000/Kconfig"
 
 config MYRI_SBUS
@@ -2024,13 +2031,28 @@ config SKGE
 	  It does not support the link failover and network management 
 	  features that "portable" vendor supplied sk98lin driver does.
 
+	  This driver supports adapters based on the original Yukon chipset:
+	  Marvell 88E8001, Belkin F5D5005, CNet GigaCard, DLink DGE-530T,
+	  Linksys EG1032/EG1064, 3Com 3C940/3C940B, SysKonnect SK-9871/9872.
+
+	  It does not support the newer Yukon2 chipset: a separate driver,
+	  sky2, is provided for Yukon2-based adapters.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called skge.  This is recommended.
 
 config SKY2
 	tristate "SysKonnect Yukon2 support (EXPERIMENTAL)"
 	depends on PCI && EXPERIMENTAL
 	select CRC32
 	---help---
-	  This driver support the Marvell Yukon 2 Gigabit Ethernet adapter.
+	  This driver supports Gigabit Ethernet adapters based on the the
+	  Marvell Yukon 2 chipset:
+	  Marvell 88E8021/88E8022/88E8035/88E8036/88E8038/88E8050/88E8052/
+	  88E8053/88E8055/88E8061/88E8062, SysKonnect SK-9E21D/SK-9S21
+
+	  This driver does not support the original Yukon chipset: a seperate
+	  driver, skge, is provided for Yukon-based adapters.
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called sky2.  This is recommended.
@@ -2040,8 +2062,15 @@ config SK98LIN
 	depends on PCI
 	---help---
 	  Say Y here if you have a Marvell Yukon or SysKonnect SK-98xx/SK-95xx
-	  compliant Gigabit Ethernet Adapter. The following adapters are supported
-	  by this driver:
+	  compliant Gigabit Ethernet Adapter.
+
+	  This driver supports the original Yukon chipset. A cleaner driver is 
+	  also available (skge) which seems to work better than this one.
+
+	  This driver does not support the newer Yukon2 chipset. A seperate
+	  driver, sky2, is provided to support Yukon2-based adapters.
+
+	  The following adapters are supported by this driver:
 	    - 3Com 3C940 Gigabit LOM Ethernet Adapter
 	    - 3Com 3C941 Gigabit LOM Ethernet Adapter
 	    - Allied Telesyn AT-2970LX Gigabit Ethernet Adapter
@@ -2676,10 +2705,6 @@ config SHAPER
 	  Class-Based Queueing (CBQ) scheduling support which you get if you
 	  say Y to "QoS and/or fair queueing" above.
 
-	  To set up and configure shaper devices, you need the shapecfg
-	  program, available from <ftp://shadow.cabi.net/pub/Linux/> in the
-	  shaper package.
-
 	  To compile this driver as a module, choose M here: the module
 	  will be called shaper.  If unsure, say N.
 
@@ -2690,8 +2715,6 @@ config NETCONSOLE
 	If you want to log kernel messages over the network, enable this.
 	See <file:Documentation/networking/netconsole.txt> for details.
 
-endif #NETDEVICES
-
 config NETPOLL
 	def_bool NETCONSOLE