X-Git-Url: https://git.openpandora.org/cgi-bin/gitweb.cgi?p=pandora-kernel.git;a=blobdiff_plain;f=drivers%2Fgpu%2Fdrm%2Fi915%2Fi915_reg.h;h=18e3749fbd11dbea9132808aaceef0655769b2e1;hp=281db6e5403ad1d9ed024e2924cfbc0344c1951a;hb=f899fc64cda8569d0529452aafc0da31c042df2e;hpb=e981b060767b3c4ac9393ad8d2558d648e35dfcb diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 281db6e5403a..18e3749fbd11 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -25,6 +25,8 @@ #ifndef _I915_REG_H_ #define _I915_REG_H_ +#define _PIPE(pipe, a, b) ((a) + (pipe)*((b)-(a))) + /* * The Bridge device's PCI config space has information about the * fb aperture size and the amount of pre-reserved memory. @@ -170,6 +172,7 @@ #define MI_NO_WRITE_FLUSH (1 << 2) #define MI_SCENE_COUNT (1 << 3) /* just increment scene count */ #define MI_END_SCENE (1 << 4) /* flush binner and incr scene count */ +#define MI_INVALIDATE_ISP (1 << 5) /* invalidate indirect state pointers */ #define MI_BATCH_BUFFER_END MI_INSTR(0x0a, 0) #define MI_REPORT_HEAD MI_INSTR(0x07, 0) #define MI_OVERLAY_FLIP MI_INSTR(0x11,0) @@ -180,6 +183,12 @@ #define MI_DISPLAY_FLIP MI_INSTR(0x14, 2) #define MI_DISPLAY_FLIP_I915 MI_INSTR(0x14, 1) #define MI_DISPLAY_FLIP_PLANE(n) ((n) << 20) +#define MI_SET_CONTEXT MI_INSTR(0x18, 0) +#define MI_MM_SPACE_GTT (1<<8) +#define MI_MM_SPACE_PHYSICAL (0<<8) +#define MI_SAVE_EXT_STATE_EN (1<<3) +#define MI_RESTORE_EXT_STATE_EN (1<<2) +#define MI_RESTORE_INHIBIT (1<<0) #define MI_STORE_DWORD_IMM MI_INSTR(0x20, 1) #define MI_MEM_VIRTUAL (1 << 22) /* 965+ only */ #define MI_STORE_DWORD_INDEX MI_INSTR(0x21, 1) @@ -288,6 +297,8 @@ #define RING_VALID_MASK 0x00000001 #define RING_VALID 0x00000001 #define RING_INVALID 0x00000000 +#define RING_WAIT_I8XX (1<<0) /* gen2, PRBx_HEAD */ +#define RING_WAIT (1<<11) /* gen3+, PRBx_CTL */ #define PRB1_TAIL 0x02040 /* 915+ only */ #define PRB1_HEAD 0x02044 /* 915+ only */ #define PRB1_START 0x02048 /* 915+ only */ @@ -312,6 +323,7 @@ #define MI_MODE 0x0209c # define VS_TIMER_DISPATCH (1 << 6) +# define MI_FLUSH_ENABLE (1 << 11) #define SCPD0 0x0209c /* 915+ only */ #define IER 0x020a0 @@ -571,12 +583,51 @@ # define GPIO_DATA_VAL_IN (1 << 12) # define GPIO_DATA_PULLUP_DISABLE (1 << 13) -#define GMBUS0 0x5100 -#define GMBUS1 0x5104 -#define GMBUS2 0x5108 -#define GMBUS3 0x510c -#define GMBUS4 0x5110 -#define GMBUS5 0x5120 +#define GMBUS0 0x5100 /* clock/port select */ +#define GMBUS_RATE_100KHZ (0<<8) +#define GMBUS_RATE_50KHZ (1<<8) +#define GMBUS_RATE_400KHZ (2<<8) /* reserved on Pineview */ +#define GMBUS_RATE_1MHZ (3<<8) /* reserved on Pineview */ +#define GMBUS_HOLD_EXT (1<<7) /* 300ns hold time, rsvd on Pineview */ +#define GMBUS_PORT_DISABLED 0 +#define GMBUS_PORT_SSC 1 +#define GMBUS_PORT_VGADDC 2 +#define GMBUS_PORT_PANEL 3 +#define GMBUS_PORT_DPC 4 /* HDMIC */ +#define GMBUS_PORT_DPB 5 /* SDVO, HDMIB */ + /* 6 reserved */ +#define GMBUS_PORT_DPD 7 /* HDMID */ +#define GMBUS_NUM_PORTS 8 +#define GMBUS1 0x5104 /* command/status */ +#define GMBUS_SW_CLR_INT (1<<31) +#define GMBUS_SW_RDY (1<<30) +#define GMBUS_ENT (1<<29) /* enable timeout */ +#define GMBUS_CYCLE_NONE (0<<25) +#define GMBUS_CYCLE_WAIT (1<<25) +#define GMBUS_CYCLE_INDEX (2<<25) +#define GMBUS_CYCLE_STOP (4<<25) +#define GMBUS_BYTE_COUNT_SHIFT 16 +#define GMBUS_SLAVE_INDEX_SHIFT 8 +#define GMBUS_SLAVE_ADDR_SHIFT 1 +#define GMBUS_SLAVE_READ (1<<0) +#define GMBUS_SLAVE_WRITE (0<<0) +#define GMBUS2 0x5108 /* status */ +#define GMBUS_INUSE (1<<15) +#define GMBUS_HW_WAIT_PHASE (1<<14) +#define GMBUS_STALL_TIMEOUT (1<<13) +#define GMBUS_INT (1<<12) +#define GMBUS_HW_RDY (1<<11) +#define GMBUS_SATOER (1<<10) +#define GMBUS_ACTIVE (1<<9) +#define GMBUS3 0x510c /* data buffer bytes 3-0 */ +#define GMBUS4 0x5110 /* interrupt mask (Pineview+) */ +#define GMBUS_SLAVE_TIMEOUT_EN (1<<4) +#define GMBUS_NAK_EN (1<<3) +#define GMBUS_IDLE_EN (1<<2) +#define GMBUS_HW_WAIT_EN (1<<1) +#define GMBUS_HW_RDY_EN (1<<0) +#define GMBUS5 0x5120 /* byte index */ +#define GMBUS_2BYTE_INDEX_EN (1<<31) /* * Clock control & power management @@ -595,6 +646,7 @@ #define VGA1_PD_P1_MASK (0x1f << 8) #define DPLL_A 0x06014 #define DPLL_B 0x06018 +#define DPLL(pipe) _PIPE(pipe, DPLL_A, DPLL_B) #define DPLL_VCO_ENABLE (1 << 31) #define DPLL_DVO_HIGH_SPEED (1 << 30) #define DPLL_SYNCLOCK_ENABLE (1 << 29) @@ -728,10 +780,13 @@ #define DPLL_MD_VGA_UDI_MULTIPLIER_MASK 0x0000003f #define DPLL_MD_VGA_UDI_MULTIPLIER_SHIFT 0 #define DPLL_B_MD 0x06020 /* 965+ only */ +#define DPLL_MD(pipe) _PIPE(pipe, DPLL_A_MD, DPLL_B_MD) #define FPA0 0x06040 #define FPA1 0x06044 #define FPB0 0x06048 #define FPB1 0x0604c +#define FP0(pipe) _PIPE(pipe, FPA0, FPB0) +#define FP1(pipe) _PIPE(pipe, FPA1, FPB1) #define FP_N_DIV_MASK 0x003f0000 #define FP_N_PINEVIEW_DIV_MASK 0x00ff0000 #define FP_N_DIV_SHIFT 16 @@ -918,6 +973,8 @@ #define CLKCFG_MEM_800 (3 << 4) #define CLKCFG_MEM_MASK (7 << 4) +#define TSC1 0x11001 +#define TSE (1<<0) #define TR1 0x11006 #define TSFS 0x11020 #define TSFS_SLOPE_MASK 0x0000ff00 @@ -1062,6 +1119,8 @@ #define MEMSTAT_SRC_CTL_STDBY 3 #define RCPREVBSYTUPAVG 0x113b8 #define RCPREVBSYTDNAVG 0x113bc +#define PMMISC 0x11214 +#define MCPPCE_EN (1<<0) /* enable PM_MSG from PCH->MPC */ #define SDEW 0x1124c #define CSIEW0 0x11250 #define CSIEW1 0x11254 @@ -1099,6 +1158,11 @@ #define DDRMPLL1 0X12c20 #define PEG_BAND_GAP_DATA 0x14d68 +/* + * Logical Context regs + */ +#define CCID 0x2180 +#define CCID_EN (1<<0) /* * Overlay regs */ @@ -1137,6 +1201,15 @@ #define PIPEBSRC 0x6101c #define BCLRPAT_B 0x61020 +#define HTOTAL(pipe) _PIPE(pipe, HTOTAL_A, HTOTAL_B) +#define HBLANK(pipe) _PIPE(pipe, HBLANK_A, HBLANK_B) +#define HSYNC(pipe) _PIPE(pipe, HSYNC_A, HSYNC_B) +#define VTOTAL(pipe) _PIPE(pipe, VTOTAL_A, VTOTAL_B) +#define VBLANK(pipe) _PIPE(pipe, VBLANK_A, VBLANK_B) +#define VSYNC(pipe) _PIPE(pipe, VSYNC_A, VSYNC_B) +#define PIPESRC(pipe) _PIPE(pipe, PIPEASRC, PIPEBSRC) +#define BCLRPAT(pipe) _PIPE(pipe, BCLRPAT_A, BCLRPAT_B) + /* VGA port control */ #define ADPA 0x61100 #define ADPA_DAC_ENABLE (1<<31) @@ -1468,6 +1541,7 @@ # define TV_TEST_MODE_MASK (7 << 0) #define TV_DAC 0x68004 +# define TV_DAC_SAVE 0x00ffff00 /** * Reports that DAC state change logic has reported change (RO). * @@ -2062,28 +2136,35 @@ /* Display & cursor control */ -/* dithering flag on Ironlake */ -#define PIPE_ENABLE_DITHER (1 << 4) -#define PIPE_DITHER_TYPE_MASK (3 << 2) -#define PIPE_DITHER_TYPE_SPATIAL (0 << 2) -#define PIPE_DITHER_TYPE_ST01 (1 << 2) /* Pipe A */ #define PIPEADSL 0x70000 +#define DSL_LINEMASK 0x00000fff #define PIPEACONF 0x70008 -#define PIPEACONF_ENABLE (1<<31) -#define PIPEACONF_DISABLE 0 -#define PIPEACONF_DOUBLE_WIDE (1<<30) +#define PIPECONF_ENABLE (1<<31) +#define PIPECONF_DISABLE 0 +#define PIPECONF_DOUBLE_WIDE (1<<30) #define I965_PIPECONF_ACTIVE (1<<30) -#define PIPEACONF_SINGLE_WIDE 0 -#define PIPEACONF_PIPE_UNLOCKED 0 -#define PIPEACONF_PIPE_LOCKED (1<<25) -#define PIPEACONF_PALETTE 0 -#define PIPEACONF_GAMMA (1<<24) +#define PIPECONF_SINGLE_WIDE 0 +#define PIPECONF_PIPE_UNLOCKED 0 +#define PIPECONF_PIPE_LOCKED (1<<25) +#define PIPECONF_PALETTE 0 +#define PIPECONF_GAMMA (1<<24) #define PIPECONF_FORCE_BORDER (1<<25) #define PIPECONF_PROGRESSIVE (0 << 21) #define PIPECONF_INTERLACE_W_FIELD_INDICATION (6 << 21) #define PIPECONF_INTERLACE_FIELD_0_ONLY (7 << 21) #define PIPECONF_CXSR_DOWNCLOCK (1<<16) +#define PIPECONF_BPP_MASK (0x000000e0) +#define PIPECONF_BPP_8 (0<<5) +#define PIPECONF_BPP_10 (1<<5) +#define PIPECONF_BPP_6 (2<<5) +#define PIPECONF_BPP_12 (3<<5) +#define PIPECONF_DITHER_EN (1<<4) +#define PIPECONF_DITHER_TYPE_MASK (0x0000000c) +#define PIPECONF_DITHER_TYPE_SP (0<<2) +#define PIPECONF_DITHER_TYPE_ST1 (1<<2) +#define PIPECONF_DITHER_TYPE_ST2 (2<<2) +#define PIPECONF_DITHER_TYPE_TEMP (3<<2) #define PIPEASTAT 0x70024 #define PIPE_FIFO_UNDERRUN_STATUS (1UL<<31) #define PIPE_CRC_ERROR_ENABLE (1UL<<29) @@ -2120,6 +2201,8 @@ #define PIPE_6BPC (2 << 5) #define PIPE_12BPC (3 << 5) +#define PIPECONF(pipe) _PIPE(pipe, PIPEACONF, PIPEBCONF) + #define DSPARB 0x70030 #define DSPARB_CSTART_MASK (0x7f << 7) #define DSPARB_CSTART_SHIFT 7 @@ -2192,9 +2275,17 @@ #define WM1_LP_SR_EN (1<<31) #define WM1_LP_LATENCY_SHIFT 24 #define WM1_LP_LATENCY_MASK (0x7f<<24) +#define WM1_LP_FBC_MASK (0xf<<20) +#define WM1_LP_FBC_SHIFT 20 #define WM1_LP_SR_MASK (0x1ff<<8) #define WM1_LP_SR_SHIFT 8 #define WM1_LP_CURSOR_MASK (0x3f) +#define WM2_LP_ILK 0x4510c +#define WM2_LP_EN (1<<31) +#define WM3_LP_ILK 0x45110 +#define WM3_LP_EN (1<<31) +#define WM1S_LP_ILK 0x45120 +#define WM1S_LP_EN (1<<31) /* Memory latency timer register */ #define MLTR_ILK 0x11222 @@ -2311,6 +2402,14 @@ #define DSPASURF 0x7019C /* 965+ only */ #define DSPATILEOFF 0x701A4 /* 965+ only */ +#define DSPCNTR(plane) _PIPE(plane, DSPACNTR, DSPBCNTR) +#define DSPADDR(plane) _PIPE(plane, DSPAADDR, DSPBADDR) +#define DSPSTRIDE(plane) _PIPE(plane, DSPASTRIDE, DSPBSTRIDE) +#define DSPPOS(plane) _PIPE(plane, DSPAPOS, DSPBPOS) +#define DSPSIZE(plane) _PIPE(plane, DSPASIZE, DSPBSIZE) +#define DSPSURF(plane) _PIPE(plane, DSPASURF, DSPBSURF) +#define DSPTILEOFF(plane) _PIPE(plane, DSPATILEOFF, DSPBTILEOFF) + /* VBIOS flags */ #define SWF00 0x71410 #define SWF01 0x71414 @@ -2375,6 +2474,7 @@ #define RR_HW_HIGH_POWER_FRAMES_MASK 0xff00 #define FDI_PLL_BIOS_0 0x46000 +#define FDI_PLL_FB_CLOCK_MASK 0xff #define FDI_PLL_BIOS_1 0x46004 #define FDI_PLL_BIOS_2 0x46008 #define DISPLAY_PORT_PLL_BIOS_0 0x4600c @@ -2398,46 +2498,47 @@ #define PIPEA_DATA_M1 0x60030 #define TU_SIZE(x) (((x)-1) << 25) /* default size 64 */ #define TU_SIZE_MASK 0x7e000000 -#define PIPEA_DATA_M1_OFFSET 0 +#define PIPE_DATA_M1_OFFSET 0 #define PIPEA_DATA_N1 0x60034 -#define PIPEA_DATA_N1_OFFSET 0 +#define PIPE_DATA_N1_OFFSET 0 #define PIPEA_DATA_M2 0x60038 -#define PIPEA_DATA_M2_OFFSET 0 +#define PIPE_DATA_M2_OFFSET 0 #define PIPEA_DATA_N2 0x6003c -#define PIPEA_DATA_N2_OFFSET 0 +#define PIPE_DATA_N2_OFFSET 0 #define PIPEA_LINK_M1 0x60040 -#define PIPEA_LINK_M1_OFFSET 0 +#define PIPE_LINK_M1_OFFSET 0 #define PIPEA_LINK_N1 0x60044 -#define PIPEA_LINK_N1_OFFSET 0 +#define PIPE_LINK_N1_OFFSET 0 #define PIPEA_LINK_M2 0x60048 -#define PIPEA_LINK_M2_OFFSET 0 +#define PIPE_LINK_M2_OFFSET 0 #define PIPEA_LINK_N2 0x6004c -#define PIPEA_LINK_N2_OFFSET 0 +#define PIPE_LINK_N2_OFFSET 0 /* PIPEB timing regs are same start from 0x61000 */ #define PIPEB_DATA_M1 0x61030 -#define PIPEB_DATA_M1_OFFSET 0 #define PIPEB_DATA_N1 0x61034 -#define PIPEB_DATA_N1_OFFSET 0 #define PIPEB_DATA_M2 0x61038 -#define PIPEB_DATA_M2_OFFSET 0 #define PIPEB_DATA_N2 0x6103c -#define PIPEB_DATA_N2_OFFSET 0 #define PIPEB_LINK_M1 0x61040 -#define PIPEB_LINK_M1_OFFSET 0 #define PIPEB_LINK_N1 0x61044 -#define PIPEB_LINK_N1_OFFSET 0 #define PIPEB_LINK_M2 0x61048 -#define PIPEB_LINK_M2_OFFSET 0 #define PIPEB_LINK_N2 0x6104c -#define PIPEB_LINK_N2_OFFSET 0 + +#define PIPE_DATA_M1(pipe) _PIPE(pipe, PIPEA_DATA_M1, PIPEB_DATA_M1) +#define PIPE_DATA_N1(pipe) _PIPE(pipe, PIPEA_DATA_N1, PIPEB_DATA_N1) +#define PIPE_DATA_M2(pipe) _PIPE(pipe, PIPEA_DATA_M2, PIPEB_DATA_M2) +#define PIPE_DATA_N2(pipe) _PIPE(pipe, PIPEA_DATA_N2, PIPEB_DATA_N2) +#define PIPE_LINK_M1(pipe) _PIPE(pipe, PIPEA_LINK_M1, PIPEB_LINK_M1) +#define PIPE_LINK_N1(pipe) _PIPE(pipe, PIPEA_LINK_N1, PIPEB_LINK_N1) +#define PIPE_LINK_M2(pipe) _PIPE(pipe, PIPEA_LINK_M2, PIPEB_LINK_M2) +#define PIPE_LINK_N2(pipe) _PIPE(pipe, PIPEA_LINK_N2, PIPEB_LINK_N2) /* CPU panel fitter */ #define PFA_CTL_1 0x68080 @@ -2578,11 +2679,14 @@ #define PCH_DPLL_A 0xc6014 #define PCH_DPLL_B 0xc6018 +#define PCH_DPLL(pipe) _PIPE(pipe, PCH_DPLL_A, PCH_DPLL_B) #define PCH_FPA0 0xc6040 #define PCH_FPA1 0xc6044 #define PCH_FPB0 0xc6048 #define PCH_FPB1 0xc604c +#define PCH_FP0(pipe) _PIPE(pipe, PCH_FPA0, PCH_FPB0) +#define PCH_FP1(pipe) _PIPE(pipe, PCH_FPA1, PCH_FPB1) #define PCH_DPLL_TEST 0xc606c @@ -2668,6 +2772,13 @@ #define TRANS_VBLANK_B 0xe1010 #define TRANS_VSYNC_B 0xe1014 +#define TRANS_HTOTAL(pipe) _PIPE(pipe, TRANS_HTOTAL_A, TRANS_HTOTAL_B) +#define TRANS_HBLANK(pipe) _PIPE(pipe, TRANS_HBLANK_A, TRANS_HBLANK_B) +#define TRANS_HSYNC(pipe) _PIPE(pipe, TRANS_HSYNC_A, TRANS_HSYNC_B) +#define TRANS_VTOTAL(pipe) _PIPE(pipe, TRANS_VTOTAL_A, TRANS_VTOTAL_B) +#define TRANS_VBLANK(pipe) _PIPE(pipe, TRANS_VBLANK_A, TRANS_VBLANK_B) +#define TRANS_VSYNC(pipe) _PIPE(pipe, TRANS_VSYNC_A, TRANS_VSYNC_B) + #define TRANSB_DATA_M1 0xe1030 #define TRANSB_DATA_N1 0xe1034 #define TRANSB_DATA_M2 0xe1038 @@ -2679,6 +2790,7 @@ #define TRANSACONF 0xf0008 #define TRANSBCONF 0xf1008 +#define TRANSCONF(plane) _PIPE(plane, TRANSACONF, TRANSBCONF) #define TRANS_DISABLE (0<<31) #define TRANS_ENABLE (1<<31) #define TRANS_STATE_MASK (1<<30) @@ -2703,6 +2815,7 @@ /* CPU: FDI_TX */ #define FDI_TXA_CTL 0x60100 #define FDI_TXB_CTL 0x61100 +#define FDI_TX_CTL(pipe) _PIPE(pipe, FDI_TXA_CTL, FDI_TXB_CTL) #define FDI_TX_DISABLE (0<<31) #define FDI_TX_ENABLE (1<<31) #define FDI_LINK_TRAIN_PATTERN_1 (0<<28) @@ -2744,8 +2857,8 @@ /* FDI_RX, FDI_X is hard-wired to Transcoder_X */ #define FDI_RXA_CTL 0xf000c #define FDI_RXB_CTL 0xf100c +#define FDI_RX_CTL(pipe) _PIPE(pipe, FDI_RXA_CTL, FDI_RXB_CTL) #define FDI_RX_ENABLE (1<<31) -#define FDI_RX_DISABLE (0<<31) /* train, dp width same as FDI_TX */ #define FDI_DP_PORT_WIDTH_X8 (7<<19) #define FDI_8BPC (0<<16) @@ -2760,8 +2873,7 @@ #define FDI_FS_ERR_REPORT_ENABLE (1<<9) #define FDI_FE_ERR_REPORT_ENABLE (1<<8) #define FDI_RX_ENHANCE_FRAME_ENABLE (1<<6) -#define FDI_SEL_RAWCLK (0<<4) -#define FDI_SEL_PCDCLK (1<<4) +#define FDI_PCDCLK (1<<4) /* CPT */ #define FDI_AUTO_TRAINING (1<<10) #define FDI_LINK_TRAIN_PATTERN_1_CPT (0<<8) @@ -2776,6 +2888,9 @@ #define FDI_RXA_TUSIZE2 0xf0038 #define FDI_RXB_TUSIZE1 0xf1030 #define FDI_RXB_TUSIZE2 0xf1038 +#define FDI_RX_MISC(pipe) _PIPE(pipe, FDI_RXA_MISC, FDI_RXB_MISC) +#define FDI_RX_TUSIZE1(pipe) _PIPE(pipe, FDI_RXA_TUSIZE1, FDI_RXB_TUSIZE1) +#define FDI_RX_TUSIZE2(pipe) _PIPE(pipe, FDI_RXA_TUSIZE2, FDI_RXB_TUSIZE2) /* FDI_RX interrupt register format */ #define FDI_RX_INTER_LANE_ALIGN (1<<10) @@ -2794,6 +2909,8 @@ #define FDI_RXA_IMR 0xf0018 #define FDI_RXB_IIR 0xf1014 #define FDI_RXB_IMR 0xf1018 +#define FDI_RX_IIR(pipe) _PIPE(pipe, FDI_RXA_IIR, FDI_RXB_IIR) +#define FDI_RX_IMR(pipe) _PIPE(pipe, FDI_RXA_IMR, FDI_RXB_IMR) #define FDI_PLL_CTL_1 0xfe000 #define FDI_PLL_CTL_2 0xfe004 @@ -2913,6 +3030,7 @@ #define TRANS_DP_CTL_A 0xe0300 #define TRANS_DP_CTL_B 0xe1300 #define TRANS_DP_CTL_C 0xe2300 +#define TRANS_DP_CTL(pipe) (TRANS_DP_CTL_A + (pipe) * 0x01000) #define TRANS_DP_OUTPUT_ENABLE (1<<31) #define TRANS_DP_PORT_SEL_B (0<<29) #define TRANS_DP_PORT_SEL_C (1<<29) @@ -2928,6 +3046,7 @@ #define TRANS_DP_VSYNC_ACTIVE_LOW 0 #define TRANS_DP_HSYNC_ACTIVE_HIGH (1<<3) #define TRANS_DP_HSYNC_ACTIVE_LOW 0 +#define TRANS_DP_SYNC_MASK (3<<3) /* SNB eDP training params */ /* SNB A-stepping */