X-Git-Url: https://git.openpandora.org/cgi-bin/gitweb.cgi?p=pandora-kernel.git;a=blobdiff_plain;f=drivers%2Fchar%2FKconfig;h=d0c978fbc2048b1b28d2780c1319925ca45fcc26;hp=9e43e39dc35c09dc25efafa0c56555bfeabf4dea;hb=eaf60d6924759eb2a249c0b568533a90c238061b;hpb=fb7665544dd60e016494cd5531f5b65ddae22ddc

diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 9e43e39dc35c..d0c978fbc204 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -191,7 +191,7 @@ config MOXA_INTELLIO
 	  module will be called moxa.
 
 config MOXA_SMARTIO
-	tristate "Moxa SmartIO support"
+	tristate "Moxa SmartIO support (OBSOLETE)"
 	depends on SERIAL_NONSTANDARD
 	help
 	  Say Y here if you have a Moxa SmartIO multiport serial card.
@@ -202,7 +202,7 @@ config MOXA_SMARTIO
 	  here.
 
 config MOXA_SMARTIO_NEW
-	tristate "Moxa SmartIO support v. 2.0 (EXPERIMENTAL)"
+	tristate "Moxa SmartIO support v. 2.0"
 	depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA)
 	help
 	  Say Y here if you have a Moxa SmartIO multiport serial card and/or
@@ -386,6 +386,39 @@ config AU1000_SERIAL_CONSOLE
 	  If you have an Alchemy AU1000 processor (MIPS based) and you want
 	  to use a console on a serial port, say Y.  Otherwise, say N.
 
+config SERIAL_DEC
+	bool "DECstation serial support"
+	depends on MACH_DECSTATION
+	default y
+	help
+	  This selects whether you want to be asked about drivers for
+	  DECstation serial ports.
+
+	  Note that the answer to this question won't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about DECstation serial ports.
+
+config SERIAL_DEC_CONSOLE
+	bool "Support for console on a DECstation serial port"
+	depends on SERIAL_DEC
+	default y
+	help
+	  If you say Y here, it will be possible to use a serial port as the
+	  system console (the system console is the device which receives all
+	  kernel messages and warnings and which allows logins in single user
+	  mode).  Note that the firmware uses ttyS0 as the serial console on
+	  the Maxine and ttyS2 on the others.
+
+	  If unsure, say Y.
+
+config ZS
+	bool "Z85C30 Serial Support"
+	depends on SERIAL_DEC
+	default y
+	help
+	  Documentation on the Zilog 85C350 serial communications controller
+	  is downloadable at <http://www.zilog.com/pdfs/serial/z85c30.pdf>
+
 config A2232
 	tristate "Commodore A2232 serial support (EXPERIMENTAL)"
 	depends on EXPERIMENTAL && ZORRO && BROKEN_ON_SMP
@@ -610,6 +643,13 @@ config HVC_RTAS
 	help
 	  IBM Console device driver which makes use of RTAS
 
+config HVC_BEAT
+	bool "Toshiba's Beat Hypervisor Console support"
+	depends on PPC_CELLEB
+	select HVC_DRIVER
+	help
+	  Toshiba's Cell Reference Set Beat Console device driver
+
 config HVCS
 	tristate "IBM Hypervisor Virtual Console Server support"
 	depends on PPC_PSERIES
@@ -1019,16 +1059,17 @@ config MMTIMER
 source "drivers/char/tpm/Kconfig"
 
 config TELCLOCK
-	tristate "Telecom clock driver for MPBL0010 ATCA SBC"
+	tristate "Telecom clock driver for ATCA SBC"
 	depends on EXPERIMENTAL && X86
 	default n
 	help
-	  The telecom clock device is specific to the MPBL0010 ATCA computer and
-	  allows direct userspace access to the configuration of the telecom clock
-	  configuration settings.  This device is used for hardware synchronization
-	  across the ATCA backplane fabric.  Upon loading, the driver exports a
-	  sysfs directory, /sys/devices/platform/telco_clock, with a number of
-	  files for controlling the behavior of this hardware.
+	  The telecom clock device is specific to the MPCBL0010 and MPCBL0050
+	  ATCA computers and allows direct userspace access to the
+	  configuration of the telecom clock configuration settings.  This
+	  device is used for hardware synchronization across the ATCA backplane
+	  fabric.  Upon loading, the driver exports a sysfs directory,
+	  /sys/devices/platform/telco_clock, with a number of files for
+	  controlling the behavior of this hardware.
 
 endmenu