X-Git-Url: https://git.openpandora.org/cgi-bin/gitweb.cgi?p=pandora-kernel.git;a=blobdiff_plain;f=arch%2Fx86%2Fkernel%2Fapic%2Fapic.c;h=f92a8e5d1e21fd132479068028241405818aa04a;hp=fabf01eff771856d0ee2bd1026b3475c88c9cd40;hb=13588209aa90d9c8e502750fc86160314555612f;hpb=a8a44921383039bd5387020d035123d21660b309

diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index fabf01eff771..f92a8e5d1e21 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -505,7 +505,7 @@ static void __cpuinit setup_APIC_timer(void)
 {
 	struct clock_event_device *levt = &__get_cpu_var(lapic_events);
 
-	if (cpu_has(__this_cpu_ptr(&cpu_info), X86_FEATURE_ARAT)) {
+	if (this_cpu_has(X86_FEATURE_ARAT)) {
 		lapic_clockevent.features &= ~CLOCK_EVT_FEAT_C3STOP;
 		/* Make LAPIC timer preferrable over percpu HPET */
 		lapic_clockevent.rating = 150;
@@ -1237,6 +1237,17 @@ void __cpuinit setup_local_APIC(void)
 	/* always use the value from LDR */
 	early_per_cpu(x86_cpu_to_logical_apicid, cpu) =
 		logical_smp_processor_id();
+
+	/*
+	 * Some NUMA implementations (NUMAQ) don't initialize apicid to
+	 * node mapping during NUMA init.  Now that logical apicid is
+	 * guaranteed to be known, give it another chance.  This is already
+	 * a bit too late - percpu allocation has already happened without
+	 * proper NUMA affinity.
+	 */
+	if (apic->x86_32_numa_cpu_node)
+		set_apicid_to_node(early_per_cpu(x86_cpu_to_apicid, cpu),
+				   apic->x86_32_numa_cpu_node(cpu));
 #endif
 
 	/*
@@ -1812,30 +1823,41 @@ void smp_spurious_interrupt(struct pt_regs *regs)
  */
 void smp_error_interrupt(struct pt_regs *regs)
 {
-	u32 v, v1;
+	u32 v0, v1;
+	u32 i = 0;
+	static const char * const error_interrupt_reason[] = {
+		"Send CS error",		/* APIC Error Bit 0 */
+		"Receive CS error",		/* APIC Error Bit 1 */
+		"Send accept error",		/* APIC Error Bit 2 */
+		"Receive accept error",		/* APIC Error Bit 3 */
+		"Redirectable IPI",		/* APIC Error Bit 4 */
+		"Send illegal vector",		/* APIC Error Bit 5 */
+		"Received illegal vector",	/* APIC Error Bit 6 */
+		"Illegal register address",	/* APIC Error Bit 7 */
+	};
 
 	exit_idle();
 	irq_enter();
 	/* First tickle the hardware, only then report what went on. -- REW */
-	v = apic_read(APIC_ESR);
+	v0 = apic_read(APIC_ESR);
 	apic_write(APIC_ESR, 0);
 	v1 = apic_read(APIC_ESR);
 	ack_APIC_irq();
 	atomic_inc(&irq_err_count);
 
-	/*
-	 * Here is what the APIC error bits mean:
-	 * 0: Send CS error
-	 * 1: Receive CS error
-	 * 2: Send accept error
-	 * 3: Receive accept error
-	 * 4: Reserved
-	 * 5: Send illegal vector
-	 * 6: Received illegal vector
-	 * 7: Illegal register address
-	 */
-	pr_debug("APIC error on CPU%d: %02x(%02x)\n",
-		smp_processor_id(), v , v1);
+	apic_printk(APIC_DEBUG, KERN_DEBUG "APIC error on CPU%d: %02x(%02x)",
+		    smp_processor_id(), v0 , v1);
+
+	v1 = v1 & 0xff;
+	while (v1) {
+		if (v1 & 0x1)
+			apic_printk(APIC_DEBUG, KERN_CONT " : %s", error_interrupt_reason[i]);
+		i++;
+		v1 >>= 1;
+	};
+
+	apic_printk(APIC_DEBUG, KERN_CONT "\n");
+
 	irq_exit();
 }
 
@@ -2003,21 +2025,6 @@ void default_init_apic_ldr(void)
 	apic_write(APIC_LDR, val);
 }
 
-#ifdef CONFIG_X86_32
-int default_x86_32_numa_cpu_node(int cpu)
-{
-#ifdef CONFIG_NUMA
-	int apicid = early_per_cpu(x86_cpu_to_apicid, cpu);
-
-	if (apicid != BAD_APICID)
-		return __apicid_to_node[apicid];
-	return NUMA_NO_NODE;
-#else
-	return 0;
-#endif
-}
-#endif
-
 /*
  * Power management
  */